Effect of quench-induced precipitation on microstructure and mechanical properties of 7085 aluminum alloy

Liu, Shengdan; Li, Qun; Lin, Huaqiang; Sun, Lin; Long, Tao; Ye, Lingying; Deng, Yunlai

doi:10.1016/j.matdes.2017.06.054

Title: Effect of quench-induced precipitation on microstructure and mechanical properties of 7085 aluminum alloy

Full Record
Other Related Research

Authors:: Liu, Shengdan; Li, Qun; Lin, Huaqiang; Sun, Lin; Long, Tao; Ye, Lingying; Deng, Yunlai

Publication Date:: 2017-10-01

Sponsoring Org.:: USDOE Office of Electricity (OE), Advanced Grid Research & Development. Power Systems Engineering Research

OSTI Identifier:: 1550332

Grant/Contract Number:: 2016YFB0300901

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Materials & Design

Additional Journal Information:: Journal Name: Materials & Design Journal Volume: 132 Journal Issue: C; Journal ID: ISSN 0264-1275

Publisher:: Elsevier

Country of Publication:: United Kingdom

Language:: English

Citation Formats


                    Liu, Shengdan, Li, Qun, Lin, Huaqiang, Sun, Lin, Long, Tao, Ye, Lingying, and Deng, Yunlai. Effect of quench-induced precipitation on microstructure and mechanical properties of 7085 aluminum alloy.  United Kingdom: N. p., 2017. 
        Web.  doi:10.1016/j.matdes.2017.06.054.

Copy to clipboard


                    Liu, Shengdan, Li, Qun, Lin, Huaqiang, Sun, Lin, Long, Tao, Ye, Lingying, & Deng, Yunlai. Effect of quench-induced precipitation on microstructure and mechanical properties of 7085 aluminum alloy.  United Kingdom.  doi:https://doi.org/10.1016/j.matdes.2017.06.054

Copy to clipboard


                    Liu, Shengdan, Li, Qun, Lin, Huaqiang, Sun, Lin, Long, Tao, Ye, Lingying, and Deng, Yunlai. Sun .  
        "Effect of quench-induced precipitation on microstructure and mechanical properties of 7085 aluminum alloy".  United Kingdom.  doi:https://doi.org/10.1016/j.matdes.2017.06.054.

Copy to clipboard


                    
@article{osti_1550332,

  title        = {Effect of quench-induced precipitation on microstructure and mechanical properties of 7085 aluminum alloy},

  author       = {Liu, Shengdan and Li, Qun and Lin, Huaqiang and Sun, Lin and Long, Tao and Ye, Lingying and Deng, Yunlai},

  abstractNote = {},

  doi          = {10.1016/j.matdes.2017.06.054},

  journal      = {Materials & Design},

  number       = C,

  volume       = 132,

  place        = {United Kingdom},

  year         = {2017},

  month        = {10}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
DOI: https://doi.org/10.1016/j.matdes.2017.06.054

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 23 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Microstructure evolution in the conventional single side and bobbin tool friction stir welding of thick rolled 7085-T7452 aluminum alloy

Journal Article Xu, W.F., E-mail: xwf1982@nwpu.edu.cn ; Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong ; Luo, Y. X. ; ... - Materials Characterization

Highlights: • Comparison of microstructure evolution via EBSD of SS-FSW and BB-FSW was investigated. • Friction heat, strain rate and degree of recrystallization affected grain size. • Discontinuously dynamic recrystallization occurred in the weld nugget zone. • The degree of recrystallization was mainly controlled by the strain rate. - Abstract: The microstructure evolution during the conventional single side friction stir welding (SS-FSW) and the bobbin tool FSW (BB-FSW) of 7085-T7452 alloy thick plate was extensively studied by using the state-of-the-art materials characterization techniques. The Electron backscattering diffraction results reveal that a significant grain refinement and a larger percentage of highmore »« less
DOI: https://doi.org/10.1016/J.MATCHAR.2018.01.051
Effect of FTMT on precipitation and mechanical properties of aluminum-lithium based alloys

Conference Miller, W S ; Palmer, I G ; Davis, R ; ...

Al-Li alloys containing copper and magnesium are currently under development. These alloys are strengthened by the precipitation of {delta}{prime} and S{prime} phases. The {delta}{prime} primarily nucleates homogeneously during the quench from solution treatment whereas the S{prime}-phase nucleates heterogeneously during subsequent aging. Low ductility and poor fracture toughness in Al-Li alloys is attributed to intense coplanar slip associated with {delta}{prime} precipitates, however, the S{prime}-phase disperses slip giving improved strength, ductility and fracture toughness. The effect of the treatments on strength, ductility and fracture toughness are described, and the results correlated with the microstructure of the alloy.
The effect of consolidation temperature on microstructure and mechanical properties in powder metallurgy -- Processed 2XXX aluminum alloy composites reinforced with SiC particulates

Journal Article Shin, K ; Chung, D ; Lee, S - Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science

The effects of consolidation temperature on the development of microstructure and resulting mechanical properties of 2XXX aluminum composites were studied in an effort to fabricate composites with enhanced properties. Type 2009 and 2124 aluminum composites reinforced with 15 pct SiC particulates were produced at four different consolidation temperatures, i.e., 560 C, 580 C, 600 C, and 620 C, followed by extrusion at 450 C. The 2124 Al-SiC{sub p} composites consolidated at 560 C showed the most homogeneous and the finest microstructures with the best mechanical properties, which were even better than the whisker-reinforced counterparts. All the results of the tensilemore »« less
DOI: https://doi.org/10.1007/s11661-997-0019-4
Effect of trace amounts of added Sc on microstructure and mechanical properties of 2055 aluminum alloy

Journal Article Jiang, Bo ; Yi, Danqing ; Key Laboratory for Nonferrous Materials Science and Engineering, Ministry of Education, Central South University, Changsha 410083 ; ... - Materials Characterization

Highlights: • Effect of trace Sc on microstructure and mechanical properties in 2055 Al-alloy was investigated. • T{sub 1} is the main strengthening phase in Sc free and Sc added 2055 alloy at the aging temperature of 175°C and 200°C. • The refinement of T{sub 1} by Sc addition depends on the aging temperature. • Mechanical properties were deteriorated by Sc at the aging temperature of 175°C and improved at 200°C aging treatment. - Abstract: The effects of Sc additions and isothermal aging on the microstructure and mechanical properties of 2055 aluminum alloy have been investigated. The isothermal aging temperaturesmore »« less
DOI: https://doi.org/10.1016/J.MATCHAR.2018.04.041
The Effects of Low Frequency on the Microstructure and Mechanical Properties of High-Strength Al-Mg Aluminum Alloys by Wire and Double-Pulsed Arc Additive Manufacturing

Journal Article Feng, Yuehai ; He, Lei ; Wang, Kehong ; ... - Journal of Materials Engineering and Performance

An innovative and high deposition efficiency process, the double-pulsed arc additive manufacturing process, is used to produce high-strength Al-Mg wall components. This dissertation investigates the electrical parameter acquisition, bead appearance, porosity morphology, microstructure and mechanical properties of additively manufactured high-strength Al-Mg wall components and how these are affected by the low frequency of the double-pulsed arc additive manufacturing process. Then, using this process at different low frequencies of 0, 1, 3, 5, 7 and 9 Hz, multilayer deposition experiments were performed. It can be observed that the deposit porosity is obviously eliminated compared with cold metal transfer (CMT) process. The beadmore »« less
DOI: https://doi.org/10.1007/S11665-018-3710-2

Similar Records