Development of large aperture projection scatterometry for catalyst loading evaluation in proton exchange membrane fuel cells

doi:10.1016/j.jpowsour.2017.07.092

Title: Development of large aperture projection scatterometry for catalyst loading evaluation in proton exchange membrane fuel cells

Full Record
Other Related Research

Authors:: Stocker, Michael T.; Barnes, Bryan M.; Sohn, Martin; Stanfield, Eric; Silver, Richard M.

Publication Date:: 2017-10-01

Sponsoring Org.:: USDOE

OSTI Identifier:: 1549858

Grant/Contract Number:: [EE001047]

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Journal of Power Sources

Additional Journal Information:: [Journal Name: Journal of Power Sources Journal Volume: 364 Journal Issue: C]; Journal ID: ISSN 0378-7753

Publisher:: Elsevier

Country of Publication:: Netherlands

Language:: English

Citation Formats


                    Stocker, Michael T., Barnes, Bryan M., Sohn, Martin, Stanfield, Eric, and Silver, Richard M. Development of large aperture projection scatterometry for catalyst loading evaluation in proton exchange membrane fuel cells.  Netherlands: N. p., 2017. 
        Web.  doi:10.1016/j.jpowsour.2017.07.092.

Copy to clipboard


                    Stocker, Michael T., Barnes, Bryan M., Sohn, Martin, Stanfield, Eric, & Silver, Richard M. Development of large aperture projection scatterometry for catalyst loading evaluation in proton exchange membrane fuel cells.  Netherlands.  doi:10.1016/j.jpowsour.2017.07.092.

Copy to clipboard


                    Stocker, Michael T., Barnes, Bryan M., Sohn, Martin, Stanfield, Eric, and Silver, Richard M. Sun .  
        "Development of large aperture projection scatterometry for catalyst loading evaluation in proton exchange membrane fuel cells".  Netherlands.  doi:10.1016/j.jpowsour.2017.07.092.

Copy to clipboard


                    
@article{osti_1549858,

  title        = {Development of large aperture projection scatterometry for catalyst loading evaluation in proton exchange membrane fuel cells},

  author       = {Stocker, Michael T. and Barnes, Bryan M. and Sohn, Martin and Stanfield, Eric and Silver, Richard M.},

  abstractNote = {},

  doi          = {10.1016/j.jpowsour.2017.07.092},

  journal      = {Journal of Power Sources},

  number       = [C],

  volume       = [364],

  place        = {Netherlands},

  year         = {2017},

  month        = {10}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
DOI: 10.1016/j.jpowsour.2017.07.092

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 5 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Application of a Segmented Cell Setup to Detect Pinhole and Catalyst Loading Defects in Proton Exchange Membrane Fuel Cells

Journal Article Reshetenko, T V ; Bender, G ; Bethune, K ; ... - Electrochimica Acta
DOI: 10.1016/j.electacta.2012.04.138
Carbon monoxide tolerant anodes for proton exchange membrane (PEM) fuel cells. 1. Catalyst development approach

Conference Holleck, G L ; Pasquariello, D M ; Clauson, S L

PEM fuel cells are highly attractive for distributed power and cogeneration systems. They are efficient and function virtually without noise or pollution. To be competitive PEM fuel cells must operate on fuel mixtures obtained by reforming of widely available natural gas or liquid hydrocarbons. Reformed fuel gas mixtures invariably contain CO, a strong poison for Pt. Therefore CO tolerant anode catalysts are essential for wide spread PEMFC introduction. It is the objective to develop effective CO tolerant fuel cell catalysts based on multi-component platinum-transition metal alloys. Towards this goal the authors have developed a novel approach for the synthesis andmore »« less
Development of High Performance Carbon Composite Catalyst for Oxygen Reduction Reaction in PEM Proton Exchange Membrane Fuel Cells

Journal Article Nallathambi, V ; Lee, J ; Kumaraguru, S ; ... - Journal of Power Sources
DOI: 10.1016/j.jpowsour.2008.05.020
Electronically conducting proton exchange polymers as catalyst supports for proton exchange membrane fuel cells. Electrocatalysis of oxygen reduction, hydrogen oxidation, and methanol oxidation

Journal Article Lefebvre, M C ; Qi, Z ; Pickup, P G - Journal of the Electrochemical Society

A variety of supported catalysts were prepared by the chemical deposition of Pt and Pt-Ru particles on chemically prepared poly(3,4-ethylenedioxythiophene)/poly(styrene-4-sulfonate) (PEDOT/PSS) and PEDOT/polyvinylsulfate (PVS) composites. The polymer particles were designed to provide a porous, proton-conducting and electron-conducting catalyst support for use in fuel cells. These polymer-supported catalysts were characterized by electron microscopy, impedance spectroscopy, cyclic voltammetry, and conductivity measurements. Their catalytic activities toward hydrogen and methanol oxidation and oxygen reduction were evaluated in proton exchange membrane fuel-cell-type gas diffusion electrodes. Activities for oxygen reduction comparable to that obtained with a commercial carbon-supported catalyst were observed, whereas those for hydrogen andmore »« less
DOI: 10.1149/1.1391891
Pre-Oxidized and Nitrided Stainless Steel Foil for Proton Exchange Membrane Fuel Cell Bipolar Plates: Part 2- Single-Cell Fuel Cell Evaluation of Stamped Plates

Journal Article Toops, Todd J ; Brady, Michael P ; Tortorelli, Peter F ; ... - Journal of Power Sources

Thermal (gas) nitridation of stainless steel alloys can yield low interfacial contact resistance (ICR), electrically conductive and corrosion-resistant nitride containing surface layers (Cr{sub 2}N, CrN, TiN, V{sub 2}N, VN, etc.) of interest for fuel cells, batteries, and sensors. This paper presents results of proton exchange membrane (PEM) single-cell fuel cell studies of stamped and pre-oxidized/nitrided developmental Fe-20Cr-4V weight percent (wt.%) and commercial type 2205 stainless steel alloy foils. The single-cell fuel cell behavior of the stamped and pre-oxidized/nitrided material was compared to as-stamped (no surface treatment) 904L, 2205, and Fe-20Cr-4V stainless steel alloy foils and machined graphite of similar flowmore »« less
DOI: 10.1016/j.jpowsour.2010.03.056

Similar Records