Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: Application to additive manufacturing

Wang, Zhuqing; Stoica, Alexandru D.; Ma, Dong; Beese, Allison M.

doi:10.1016/j.msea.2017.09.071

Title: Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: Application to additive manufacturing

Authors:: Wang, Zhuqing; Stoica, Alexandru D.; Ma, Dong; Beese, Allison M.

Publication Date:: 2017-11-01

Sponsoring Org.:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

OSTI Identifier:: 1549798

Grant/Contract Number:: AC05-00OR22725

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

Additional Journal Information:: Journal Name: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing Journal Volume: 707 Journal Issue: C; Journal ID: ISSN 0921-5093

Publisher:: Elsevier

Country of Publication:: Netherlands

Language:: English

Citation Formats


                    Wang, Zhuqing, Stoica, Alexandru D., Ma, Dong, and Beese, Allison M. Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: Application to additive manufacturing.  Netherlands: N. p., 2017. 
Web.  https://doi.org/10.1016/j.msea.2017.09.071.

Copy to clipboard


                    Wang, Zhuqing, Stoica, Alexandru D., Ma, Dong, & Beese, Allison M. Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: Application to additive manufacturing.  Netherlands.  https://doi.org/10.1016/j.msea.2017.09.071

Copy to clipboard


                    Wang, Zhuqing, Stoica, Alexandru D., Ma, Dong, and Beese, Allison M. Wed .  
"Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: Application to additive manufacturing".  Netherlands.  https://doi.org/10.1016/j.msea.2017.09.071.

Copy to clipboard


                    
@article{osti_1549798,

  title        = {Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: Application to additive manufacturing},

  author       = {Wang, Zhuqing and Stoica, Alexandru D. and Ma, Dong and Beese, Allison M.},

  abstractNote = {},

  doi          = {10.1016/j.msea.2017.09.071},

  journal      = {Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing},

  number       = C,

  volume       = 707,

  place        = {Netherlands},

  year         = {2017},

  month        = {11}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.msea.2017.09.071

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 12 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Investigation on high temperature short-term creep and stress relaxation of titanium alloy
journal, January 2015

Zong, Yingying; Liu, Po; Guo, Bin
Materials Science and Engineering: A, Vol. 620
DOI: 10.1016/j.msea.2014.10.015

Grain growth and texture evolution in Ti–6Al–4V during beta annealing under continuous heating conditions
journal, November 2002

Ivasishin, O. M.; Semiatin, S. L.; Markovsky, P. E.
Materials Science and Engineering: A, Vol. 337, Issue 1-2
DOI: 10.1016/S0921-5093(01)01990-6

Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition
journal, February 2015

Xu, W.; Brandt, M.; Sun, S.
Acta Materialia, Vol. 85
DOI: 10.1016/j.actamat.2014.11.028

Residual stresses in selective laser sintering and selective laser melting
journal, October 2006

Mercelis, Peter; Kruth, Jean‐Pierre
Rapid Prototyping Journal, Vol. 12, Issue 5
DOI: 10.1108/13552540610707013

The role of microstructure in the stress relaxation and tempering of laser clad Ti–6Al–4V
journal, April 2014

Cottam, R.; Luzin, V.; Liu, Q.
Materials Science and Engineering: A, Vol. 601
DOI: 10.1016/j.msea.2014.02.034

Low temperature relaxation of residual stress in Ti–6Al–4V
journal, May 2005

Elmer, J. W.; Palmer, T. A.; Babu, S. S.
Scripta Materialia, Vol. 52, Issue 10
DOI: 10.1016/j.scriptamat.2005.01.021

Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel
journal, February 2013

Ma, Mingming; Wang, Zemin; Wang, Dengzhi
Optics & Laser Technology, Vol. 45
DOI: 10.1016/j.optlastec.2012.07.002

Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V
journal, July 2014

Denlinger, Erik R.; Heigel, Jarred C.; Michaleris, Panagiotis
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 229, Issue 10
DOI: 10.1177/0954405414539494

Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material
journal, December 2016

Röttger, Arne; Geenen, Karina; Windmann, Matthias
Materials Science and Engineering: A, Vol. 678
DOI: 10.1016/j.msea.2016.10.012

First In Situ Lattice Strains Measurements Under Load at VULCAN
journal, October 2010

An, Ke; Skorpenske, Harley D.; Stoica, Alexandru D.
Metallurgical and Materials Transactions A, Vol. 42, Issue 1
DOI: 10.1007/s11661-010-0495-9

Constitutive analysis of the high-temperature deformation mechanisms of Ti–6Al–4V and Ti–6.85Al–1.6V alloys
journal, March 2005

Kim, Jeoung Han; Semiatin, S. L.; Lee, Chong Soo
Materials Science and Engineering: A, Vol. 394, Issue 1-2
DOI: 10.1016/j.msea.2004.11.061

Thermal relaxation of residual stress in laser shock peened Ti–6Al–4V alloy
journal, June 2012

Zhou, Zhong; Bhamare, Sagar; Ramakrishnan, Gokul
Surface and Coatings Technology, Vol. 206, Issue 22
DOI: 10.1016/j.surfcoat.2012.05.022

In situ observations of lattice expansion and transformation rates of α and β phases in Ti–6Al–4V
journal, January 2005

Elmer, J. W.; Palmer, T. A.; Babu, S. S.
Materials Science and Engineering: A, Vol. 391, Issue 1-2
DOI: 10.1016/j.msea.2004.08.084

Understanding the Microstructure and Properties of Components Fabricated by Laser Engineered Net Shaping (LENS)
journal, January 2000

Griffith, M. L.; Ensz, M. T.; Puskar, J. D.
MRS Proceedings, Vol. 625
DOI: 10.1557/PROC-625-9

Laser additive manufacturing of metallic components: materials, processes and mechanisms
journal, May 2012

Gu, D. D.; Meiners, W.; Wissenbach, K.
International Materials Reviews, Vol. 57, Issue 3, p. 133-164
DOI: 10.1179/1743280411Y.0000000014

Constitutive analysis of the high-temperature deformation of Ti–6Al–4V with a transformed microstructure
journal, October 2003

Kim, Jeoung Han; Semiatin, S. L.; Lee, Chong Soo
Acta Materialia, Vol. 51, Issue 18
DOI: 10.1016/S1359-6454(03)00426-9

Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications
journal, January 2009

Murr, L. E.; Quinones, S. A.; Gaytan, S. M.
Journal of the Mechanical Behavior of Biomedical Materials, Vol. 2, Issue 1
DOI: 10.1016/j.jmbbm.2008.05.004

Scanning Speed Effect on Mechanical Properties of Ti-6Al-4V Alloy Processed by Electron Beam Additive Manufacturing
journal, January 2015

Wang, Xiaoqing; Gong, Xibing; Chou, Kevin
Procedia Manufacturing, Vol. 1
DOI: 10.1016/j.promfg.2015.09.026

Characterization of stainless steel parts by Laser Metal Deposition Shaping
journal, March 2014

Zhang, Kai; Wang, Shijie; Liu, Weijun
Materials & Design, Vol. 55
DOI: 10.1016/j.matdes.2013.09.006

On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti–6Al–4V at elevated temperatures up to 550°C
journal, November 2012

Altenberger, Igor; Nalla, Ravi K.; Sano, Yuji
International Journal of Fatigue, Vol. 44
DOI: 10.1016/j.ijfatigue.2012.03.008

Effect of chemistry on martensitic phase transformation kinetics and resulting properties of additively manufactured stainless steel
journal, June 2017

Wang, Zhuqing; Beese, Allison M.
Acta Materialia, Vol. 131
DOI: 10.1016/j.actamat.2017.04.022

Effect of texture on load partitioning in Ti-6Al-4V
journal, June 2012

Warwick, J. L. W.; Coakley, J.; Raghunathan, S. L.
Acta Materialia, Vol. 60, Issue 10
DOI: 10.1016/j.actamat.2012.03.039

Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions
journal, January 2017

Wang, Zhuqing; Denlinger, Erik; Michaleris, Panagiotis
Materials & Design, Vol. 113
DOI: 10.1016/j.matdes.2016.10.003

Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys
journal, January 2015

Denlinger, Erik R.; Heigel, Jarred C.; Michaleris, Pan
Journal of Materials Processing Technology, Vol. 215
DOI: 10.1016/j.jmatprotec.2014.07.030

Property evaluation of 304L stainless steel fabricated by selective laser melting
journal, July 2012

Abd‐Elghany, K.; Bourell, D. L.
Rapid Prototyping Journal, Vol. 18, Issue 5
DOI: 10.1108/13552541211250418

Effect of stress relaxation on distortion in additive manufacturing process modeling
journal, October 2016

Denlinger, Erik R.; Michaleris, Pan
Additive Manufacturing, Vol. 12
DOI: 10.1016/j.addma.2016.06.011

Debye–Waller factor for elemental crystals
journal, July 1991

Sears, V. F.; Shelley, S. A.
Acta Crystallographica Section A Foundations of Crystallography, Vol. 47, Issue 4
DOI: 10.1107/S0108767391002970

Orientation-dependent evolution of the dislocation density in grain populations with different crystallographic orientations relative to the tensile axis in a polycrystalline aggregate of stainless steel
journal, March 2014

Ungár, Tamás; Stoica, Alexandru D.; Tichy, Géza
Acta Materialia, Vol. 66
DOI: 10.1016/j.actamat.2013.11.012

Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction
journal, September 2016

Wang, Zhuqing; Stoica, Alexandru D.; Ma, Dong
Materials Science and Engineering: A, Vol. 674
DOI: 10.1016/j.msea.2016.08.010

The effect of alpha platelet thickness on plastic flow during hot working of TI–6Al–4V with a transformed microstructure
journal, October 2001

Semiatin, S. L.; Bieler, T. R.
Acta Materialia, Vol. 49, Issue 17
DOI: 10.1016/S1359-6454(01)00236-1

Residual stresses in laser direct metal deposited Waspaloy
journal, March 2011

Moat, R. J.; Pinkerton, A. J.; Li, L.
Materials Science and Engineering: A, Vol. 528, Issue 6
DOI: 10.1016/j.msea.2010.12.010

Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock
journal, December 2015

Beese, Allison M.; Carroll, Beth E.
JOM, Vol. 68, Issue 3
DOI: 10.1007/s11837-015-1759-z

Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
journal, May 2016

Wang, Zhuqing; Palmer, Todd A.; Beese, Allison M.
Acta Materialia, Vol. 110
DOI: 10.1016/j.actamat.2016.03.019

Service properties of ultrafine-grained Ti–6Al–4V alloy at elevated temperature
journal, March 2013

Semenova, I. P.; Raab, G. I.; Golubovskiy, E. R.
Journal of Materials Science, Vol. 48, Issue 13
DOI: 10.1007/s10853-013-7305-x

Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
journal, April 2015

Carroll, Beth E.; Palmer, Todd A.; Beese, Allison M.
Acta Materialia, Vol. 87
DOI: 10.1016/j.actamat.2014.12.054

Temperature-dependent elastic anisotropy and mesoscale deformation in a nanostructured ferritic alloy
journal, October 2014

Stoica, G. M.; Stoica, A. D.; Miller, M. K.
Nature Communications, Vol. 5, Issue 1
DOI: 10.1038/ncomms6178

Deformation mechanism map for titanium
journal, June 1977

Okazaki, Kenji; Odawara, Tatsuya; Conrad, Hans
Scripta Metallurgica, Vol. 11, Issue 6
DOI: 10.1016/0036-9748(77)90151-X

Similar Records in DOE PAGES and OSTI.GOV collections:

Directional and oscillating residual stress on the mesoscale in additively manufactured Ti-6Al-4V Mesoscale and anisotropic residual stress in additive manufacturing of Ti-6Al-4V

Journal Article Strantza, Maria ; Vrancken, Bey ; Prime, Michael Bruce ; ... - Acta Materialia
Cited by 7
https://doi.org/10.1016/j.actamat.2019.01.050

Full Text Available
Stress relaxation in a nickel-base superalloy at elevated temperatures with in situ neutron diffraction characterization: Application to additive manufacturing

Journal Article Wang, Zhuqing ; Stoica, Alexandru D. ; Ma, Dong ; ... - Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
Cited by 13
https://doi.org/10.1016/j.msea.2017.12.058
Effect of hypoeutectic boron additions on the grain size and mechanical properties of Ti-6Al-4V manufactured with powder bed electron beam additive manufacturing

Journal Article Mahbooba, Zaynab ; West, Harvey ; Harrysson, Ola ; ... - JOM. Journal of the Minerals, Metals & Materials Society

In additive manufacturing, microstructural control is feasible via processing parameter alteration. However, the window for parameter variation for certain materials, such as Ti-6Al-4V, is limited, and alternative methods must be employed to customize microstructures. Grain refinement and homogenization in cast titanium alloys has been demonstrated through the addition of hypoeutectic concentrations of boron. This work explores the influence of 0.00 wt.%, 0.25 wt.%, 0.50 wt.%, and 1.0 wt.% boron additions on the microstructure and bulk mechanical properties of Ti-6Al-4V samples fabricated in an Arcam A2 electron beam melting (EBM) system with commercial processing parameters for Ti-6Al-4V. Analyses of EBM fabricatedmore »« less
https://doi.org/10.1007/s11837-016-2210-9

Full Text Available
Ambient and High-Temperature Bulk Characterization of Additively Manufactured Ti-6Al-4V Using Neutron Diffraction

Journal Article Vogel, S. C. ; Takajo, S. ; Kumar, M. A. ; ... - JOM. Journal of the Minerals, Metals & Materials Society

Characterization of the bulk microstructure using neutron diffraction has been applied to investigate the phase fractions and textures of α- and β-phases in Ti-6Al-4V fabricated by additive manufacturing. The microstructure of a specimen cut from a fan structure, built by either electron beam melting (EBM) or selective laser melting, indicated that predominantly the build direction and not the fan angle determines the microstructure. In situ heating experiments of specimens from a rod built using EBM provided insight into the lattice strain, phase fraction, and texture evolution, providing a rich picture of the microstructure changes during heat treatment of additively manufacturedmore »« less
Cited by 1
https://doi.org/10.1007/s11837-018-3038-2

Full Text Available
A review on the fatigue behavior of Ti-6Al-4V fabricated by electron beam melting additive manufacturing

Journal Article Chern, Andrew H. ; Nandwana, Peeyush ; Yuan, Tao ; ... - International Journal of Fatigue

Electron beam melting (EBM) is a swiftyly-developing metal additive manufacturing process that holds significant interest in the aerospace and biomedical industries for the high-strength titanium alloy, Ti-6Al-4V. These industries have fatigue-limited applications, yet a lack of understanding of the EBM process-microstructure-fatigue relationships limit widespread use and presents challenges for certification. In this review, uniaxial fatigue data was collected and the effects of build orientation, surface roughness, and hot-isostatic pressing are linked to the fatigue properties highlighting microstructure, defects, and failure mechanisms. The observations and conclusions are supported by statistical analysis using the mean fatigue life obtained by the Statistical Fatigue-Limitmore »« less
Cited by 24
https://doi.org/10.1016/j.ijfatigue.2018.09.022

Full Text Available

Similar Records

Title: Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: Application to additive manufacturing

Citation Formats

Investigation on high temperature short-term creep and stress relaxation of titanium alloy journal, January 2015

Grain growth and texture evolution in Ti–6Al–4V during beta annealing under continuous heating conditions journal, November 2002

Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition journal, February 2015

Residual stresses in selective laser sintering and selective laser melting journal, October 2006

The role of microstructure in the stress relaxation and tempering of laser clad Ti–6Al–4V journal, April 2014

Low temperature relaxation of residual stress in Ti–6Al–4V journal, May 2005

Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel journal, February 2013

Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V journal, July 2014

Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material journal, December 2016

First In Situ Lattice Strains Measurements Under Load at VULCAN journal, October 2010

Constitutive analysis of the high-temperature deformation mechanisms of Ti–6Al–4V and Ti–6.85Al–1.6V alloys journal, March 2005

Thermal relaxation of residual stress in laser shock peened Ti–6Al–4V alloy journal, June 2012

In situ observations of lattice expansion and transformation rates of α and β phases in Ti–6Al–4V journal, January 2005

Understanding the Microstructure and Properties of Components Fabricated by Laser Engineered Net Shaping (LENS) journal, January 2000

Laser additive manufacturing of metallic components: materials, processes and mechanisms journal, May 2012

Constitutive analysis of the high-temperature deformation of Ti–6Al–4V with a transformed microstructure journal, October 2003

Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications journal, January 2009

Scanning Speed Effect on Mechanical Properties of Ti-6Al-4V Alloy Processed by Electron Beam Additive Manufacturing journal, January 2015

Characterization of stainless steel parts by Laser Metal Deposition Shaping journal, March 2014

On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti–6Al–4V at elevated temperatures up to 550°C journal, November 2012

Effect of chemistry on martensitic phase transformation kinetics and resulting properties of additively manufactured stainless steel journal, June 2017

Effect of texture on load partitioning in Ti-6Al-4V journal, June 2012

Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions journal, January 2017

Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys journal, January 2015

Property evaluation of 304L stainless steel fabricated by selective laser melting journal, July 2012

Effect of stress relaxation on distortion in additive manufacturing process modeling journal, October 2016

Debye–Waller factor for elemental crystals journal, July 1991

Orientation-dependent evolution of the dislocation density in grain populations with different crystallographic orientations relative to the tensile axis in a polycrystalline aggregate of stainless steel journal, March 2014

Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction journal, September 2016

The effect of alpha platelet thickness on plastic flow during hot working of TI–6Al–4V with a transformed microstructure journal, October 2001

Residual stresses in laser direct metal deposited Waspaloy journal, March 2011

Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock journal, December 2015

Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing journal, May 2016

Service properties of ultrafine-grained Ti–6Al–4V alloy at elevated temperature journal, March 2013

Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing journal, April 2015

Temperature-dependent elastic anisotropy and mesoscale deformation in a nanostructured ferritic alloy journal, October 2014

Deformation mechanism map for titanium journal, June 1977

Investigation on high temperature short-term creep and stress relaxation of titanium alloy
journal, January 2015

Grain growth and texture evolution in Ti–6Al–4V during beta annealing under continuous heating conditions
journal, November 2002

Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition
journal, February 2015

Residual stresses in selective laser sintering and selective laser melting
journal, October 2006

The role of microstructure in the stress relaxation and tempering of laser clad Ti–6Al–4V
journal, April 2014

Low temperature relaxation of residual stress in Ti–6Al–4V
journal, May 2005

Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel
journal, February 2013

Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V
journal, July 2014

Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material
journal, December 2016

First In Situ Lattice Strains Measurements Under Load at VULCAN
journal, October 2010

Constitutive analysis of the high-temperature deformation mechanisms of Ti–6Al–4V and Ti–6.85Al–1.6V alloys
journal, March 2005

Thermal relaxation of residual stress in laser shock peened Ti–6Al–4V alloy
journal, June 2012

In situ observations of lattice expansion and transformation rates of α and β phases in Ti–6Al–4V
journal, January 2005

Understanding the Microstructure and Properties of Components Fabricated by Laser Engineered Net Shaping (LENS)
journal, January 2000

Laser additive manufacturing of metallic components: materials, processes and mechanisms
journal, May 2012

Constitutive analysis of the high-temperature deformation of Ti–6Al–4V with a transformed microstructure
journal, October 2003

Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications
journal, January 2009

Scanning Speed Effect on Mechanical Properties of Ti-6Al-4V Alloy Processed by Electron Beam Additive Manufacturing
journal, January 2015

Characterization of stainless steel parts by Laser Metal Deposition Shaping
journal, March 2014

On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti–6Al–4V at elevated temperatures up to 550°C
journal, November 2012

Effect of chemistry on martensitic phase transformation kinetics and resulting properties of additively manufactured stainless steel
journal, June 2017

Effect of texture on load partitioning in Ti-6Al-4V
journal, June 2012

Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions
journal, January 2017

Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys
journal, January 2015

Property evaluation of 304L stainless steel fabricated by selective laser melting
journal, July 2012

Effect of stress relaxation on distortion in additive manufacturing process modeling
journal, October 2016

Debye–Waller factor for elemental crystals
journal, July 1991

Orientation-dependent evolution of the dislocation density in grain populations with different crystallographic orientations relative to the tensile axis in a polycrystalline aggregate of stainless steel
journal, March 2014

Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction
journal, September 2016

The effect of alpha platelet thickness on plastic flow during hot working of TI–6Al–4V with a transformed microstructure
journal, October 2001

Residual stresses in laser direct metal deposited Waspaloy
journal, March 2011

Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock
journal, December 2015

Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
journal, May 2016

Service properties of ultrafine-grained Ti–6Al–4V alloy at elevated temperature
journal, March 2013

Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
journal, April 2015

Temperature-dependent elastic anisotropy and mesoscale deformation in a nanostructured ferritic alloy
journal, October 2014

Deformation mechanism map for titanium
journal, June 1977