Serration and noise behaviors in materials

Zhang, Yong; Liu, Jun Peng; Chen, Shu Ying; Xie, Xie; Liaw, Peter K.; Dahmen, Karin A.; Qiao, Jun Wei; Wang, Yan Li

doi:10.1016/j.pmatsci.2017.06.004

Title: Serration and noise behaviors in materials

Journal Article · 01 October 2017 · Progress in Materials Science

DOI: https://doi.org/10.1016/j.pmatsci.2017.06.004 · OSTI ID:1549762

Zhang, Yong; Liu, Jun Peng; Chen, Shu Ying; Xie, Xie; Liaw, Peter K.; Dahmen, Karin A.; Qiao, Jun Wei; Wang, Yan Li

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Fossil Energy and Carbon Management (FECM)

Grant/Contract Number:: FE-0008855; FE-0011194; FE-0024054

OSTI ID:: 1549762

Journal Information:: Progress in Materials Science, Journal Name: Progress in Materials Science Vol. 90 Journal Issue: C; ISSN 0079-6425

Publisher:: ElsevierCopyright Statement

Country of Publication:: United Kingdom

Language:: English

Citation Metrics:

Cited by: 185 works

Citation information provided by
Web of Science

References (370)

Dislocation multiplication, vacancy accumulation, and the onset of jerky flow during forward and reverse 1 strain in Cu-3.2 at. % Sn Ham, R. K.; Jaffrey, D. Philosophical Magazine, Vol. 15, Issue 134 https://doi.org/10.1080/14786436708227697	journal	February 1967
Constitutive model for inhomogeneous flow in bulk metallic glasses Dubach, A.; Dallatorre, F.; Loffler, J. Acta Materialia, Vol. 57, Issue 3 https://doi.org/10.1016/j.actamat.2008.10.027	journal	February 2009
Current theoretical approaches to collective behavior of dislocations Ananthakrishna, G. Physics Reports, Vol. 440, Issue 4-6 https://doi.org/10.1016/j.physrep.2006.10.003	journal	March 2007
On the difference between Lüders bands and portevin — Le chatelier bands Wijler, A.; Schade van Westrum, J. Scripta Metallurgica, Vol. 5, Issue 10 https://doi.org/10.1016/0036-9748(71)90050-0	journal	October 1971
Strain rate and temperature effects on the critical strain for Portevin–Le Chatelier effect Cai, M. C.; Niu, L. S.; Yu, T. Materials Science and Engineering: A, Vol. 527, Issue 20 https://doi.org/10.1016/j.msea.2010.05.001	journal	July 2010
Transformation-induced plasticity as the origin of serrated flow in an NiTi shape memory alloy Kato, Hiroyuki; Sasaki, Kazuaki International Journal of Plasticity, Vol. 50 https://doi.org/10.1016/j.ijplas.2013.03.011	journal	November 2013
The effect of precipitation hardening on the portevin-le chatelier effect in an AlMgSi alloy Riley, D. M.; McCormick, P. G. Acta Metallurgica, Vol. 25, Issue 2 https://doi.org/10.1016/0001-6160(77)90121-3	journal	February 1977
High-Entropy Alloys with a Hexagonal Close-Packed Structure Designed by Equi-Atomic Alloy Strategy and Binary Phase Diagrams Takeuchi, Akira; Amiya, Kenji; Wada, Takeshi JOM, Vol. 66, Issue 10 https://doi.org/10.1007/s11837-014-1085-x	journal	July 2014
Effect of precipitation hardening on strain rate sensitivity and yield behaviour in an Al-Mg-Si alloy Harun, H. J.; McCormick, P. G. Acta Metallurgica, Vol. 27, Issue 1 https://doi.org/10.1016/0001-6160(79)90067-1	journal	January 1979
Microstructural development in equiatomic multicomponent alloys Cantor, B.; Chang, I. T. H.; Knight, P. Materials Science and Engineering: A, Vol. 375-377 https://doi.org/10.1016/j.msea.2003.10.257	journal	July 2004
Flow serration and shear-band propagation in bulk metallic glasses Chen, H. M.; Huang, J. C.; Song, S. X. Applied Physics Letters, Vol. 94, Issue 14 https://doi.org/10.1063/1.3117508	journal	April 2009
Predicting burst sizes in amorphous alloys during plastic flows Qiao, J. W.; Wang, Z.; Jiao, Z. M. Materials Science and Engineering: A, Vol. 609 https://doi.org/10.1016/j.msea.2014.05.009	journal	July 2014
Progress in Understanding the Fatigue Behavior of Ti Alloys Pilchak, Adam L.; Lu, Wei Jie; Williams, James C. Materials Science Forum, Vol. 710 https://doi.org/10.4028/www.scientific.net/MSF.710.85	journal	January 2012
Crackling noise Sethna, James P.; Dahmen, Karin A.; Myers, Christopher R. Nature, Vol. 410, Issue 6825 https://doi.org/10.1038/35065675	journal	March 2001
Microstructural events of macroscopic strain localization in prestrained tensile specimens Korbel, A.; Martin, P. Acta Metallurgica, Vol. 36, Issue 9 https://doi.org/10.1016/0001-6160(88)90202-7	journal	September 1988
An electron microscopy appraisal of tensile fracture in metallic glasses Matthews, D. T. A.; Ocelík, V.; Bronsveld, P. M. Acta Materialia, Vol. 56, Issue 8 https://doi.org/10.1016/j.actamat.2007.12.029	journal	May 2008
Influences of strain rate and grain size on yield and serrated flow in commercial Al-Mg alloy 5086 Wagenhofer, Matthew; Erickson-Natishan, MarjorieAnn; Armstrong, Ronald W. Scripta Materialia, Vol. 41, Issue 11 https://doi.org/10.1016/S1359-6462(99)00265-1	journal	November 1999
Stabilization of metallic supercooled liquid and bulk amorphous alloys Inoue, Akihisa Acta Materialia, Vol. 48, Issue 1 https://doi.org/10.1016/S1359-6454(99)00300-6	journal	January 2000
Microstructure and small-scale size effects in plasticity of individual phases of Al0.7CoCrFeNi High Entropy alloy Giwa, Adenike M.; Liaw, Peter K.; Dahmen, Karin A. Extreme Mechanics Letters, Vol. 8 https://doi.org/10.1016/j.eml.2016.04.013	journal	September 2016
Depinning transition of dislocation assemblies: Pileups and low-angle grain boundaries Moretti, Paolo; Miguel, M. -Carmen; Zaiser, Michael Physical Review B, Vol. 69, Issue 21 https://doi.org/10.1103/PhysRevB.69.214103	journal	June 2004
Serrated flow kinetics in a Zr-based bulk metallic glass Qiao, J. W.; Zhang, Y.; Liaw, P. K. Intermetallics, Vol. 18, Issue 11 https://doi.org/10.1016/j.intermet.2010.06.013	journal	November 2010
Self-organized intermittent plastic flow in bulk metallic glasses Wang, G.; Chan, K. C.; Xia, L. Acta Materialia, Vol. 57, Issue 20 https://doi.org/10.1016/j.actamat.2009.08.040	journal	December 2009
Micromechanisms of serrated flow in a Ni50Pd30P20 bulk metallic glass with a large compression plasticity Wang, K.; Fujita, T.; Zeng, Y. Q. Acta Materialia, Vol. 56, Issue 12 https://doi.org/10.1016/j.actamat.2008.02.015	journal	July 2008
Serrated Flow in Inconel 625 Kim, In Sup; Chaturvedi, Mahesh C. Transactions of the Japan Institute of Metals, Vol. 28, Issue 3 https://doi.org/10.2320/matertrans1960.28.205	journal	January 1987
The Self-Organized Critical Behavior in Pd-based Bulk Metallic Glass Wang, Zhong; Li, Jiaojiao; Zhang, Wei Metals, Vol. 5, Issue 3 https://doi.org/10.3390/met5031188	journal	July 2015
Formation of Grain Boundary α in β Ti Alloys: Its Role in Deformation and Fracture Behavior of These Alloys Foltz, John W.; Welk, Brian; Collins, Peter C. Metallurgical and Materials Transactions A, Vol. 42, Issue 3 https://doi.org/10.1007/s11661-010-0322-3	journal	June 2010
Mechanical behavior of amorphous alloys Schuh, C.; Hufnagel, T.; Ramamurty, U. Acta Materialia, Vol. 55, Issue 12 https://doi.org/10.1016/j.actamat.2007.01.052	journal	July 2007
Universal Critical Dynamics in High Resolution Neuronal Avalanche Data Friedman, Nir; Ito, Shinya; Brinkman, Braden A. W. Physical Review Letters, Vol. 108, Issue 20 https://doi.org/10.1103/PhysRevLett.108.208102	journal	May 2012
Scaling aspects of domain wall dynamics and Barkhausen effect in ferromagnetic materials Bertotti, G.; Durin, G.; Magni, A. Journal of Applied Physics, Vol. 75, Issue 10 https://doi.org/10.1063/1.355666	journal	May 1994
Multiscale study of acoustic emission during smooth and jerky flow in an AlMg alloy Shashkov, I. V.; Lebyodkin, M. A.; Lebedkina, T. A. Acta Materialia, Vol. 60, Issue 19 https://doi.org/10.1016/j.actamat.2012.08.058	journal	November 2012
A finite element model for the Portevin Le Chatelier effect based on polycrystal plasticity Kok, S.; Beaudoin, A. J.; Tortorelli, D. A. Modelling and Simulation in Materials Science and Engineering, Vol. 10, Issue 6 https://doi.org/10.1088/0965-0393/10/6/309	journal	October 2002
Influence of Grain Size on the Portevin-LeChatelier Effect in Al–Mg Alloys Miura, Sei; Yamauchi, Hideaki Transactions of the Japan Institute of Metals, Vol. 13, Issue 2 https://doi.org/10.2320/matertrans1960.13.82	journal	January 1972
Scaling behaviour in the dynamics of an economic index Mantegna, Rosario N.; Stanley, H. Eugene Nature, Vol. 376, Issue 6535 https://doi.org/10.1038/376046a0	journal	July 1995
Effect of nitrogen on the critical strain for dynamic strain aging in high-manganese twinning-induced plasticity steel Lee, Sangwon; Kim, Jinkyung; Lee, Seok-Jae Scripta Materialia, Vol. 65, Issue 6 https://doi.org/10.1016/j.scriptamat.2011.06.017	journal	September 2011
On a pseudo-Portevin-Le Chatelier effect Brechet, Y.; Estrin, Y. Scripta Metallurgica et Materialia, Vol. 31, Issue 2 https://doi.org/10.1016/0956-716X(94)90172-4	journal	July 1994
Unstable plastic flow in the Al–2%Mg alloy, effect of annealing process Ziani, L.; Boudrahem, S.; Ait-Amokhtar, H. Materials Science and Engineering: A, Vol. 536 https://doi.org/10.1016/j.msea.2012.01.004	journal	February 2012
A study of strain-ageing in austenite Rose, K. S. B.; Gloverj, S. G. Acta Metallurgica, Vol. 14, Issue 11 https://doi.org/10.1016/0001-6160(66)90172-6	journal	November 1966
Correlation between serration effect and temperature Ferrero, C.; Monforte, R.; Marinari, C. Cryogenics, Vol. 34 https://doi.org/10.1016/S0011-2275(05)80109-2	journal	January 1994
Scale invariance in plastic flow of crystalline solids Zaiser, Michael Advances in Physics, Vol. 55, Issue 1-2 https://doi.org/10.1080/00018730600583514	journal	January 2006
Shape Memory and Superelasticity in Amorphous/Nanocrystalline Cu-15.0 Atomic Percent (at.%) Sn Wires: Shape Memory and Superelasticity … Zhao, Yang-Yong; Li, Hui; Wang, Yong-Sheng Advanced Engineering Materials, Vol. 16, Issue 1 https://doi.org/10.1002/adem.201300167	journal	September 2013
Statistics of Dislocation Slip Avalanches in Nanosized Single Crystals Show Tuned Critical Behavior Predicted by a Simple Mean Field Model Friedman, Nir; Jennings, Andrew T.; Tsekenis, Georgios Physical Review Letters, Vol. 109, Issue 9 https://doi.org/10.1103/PhysRevLett.109.095507	journal	August 2012
Mechanical properties of the high-entropy alloy Ag _0.5 CoCrCuFeNi at temperatures of 4.2–300 K Laktionova, M. A.; Tabchnikova, E. D.; Tang, Z. Low Temperature Physics, Vol. 39, Issue 7 https://doi.org/10.1063/1.4813688	journal	July 2013
Activation energy calculations for discontinuous yielding in Inconel 718SPF Hale, C. L.; Rollings, W. S.; Weaver, M. L. Materials Science and Engineering: A, Vol. 300, Issue 1-2 https://doi.org/10.1016/S0921-5093(00)01470-2	journal	February 2001
Barkhausen noise in soft amorphous magnetic materials under applied stress Durin, Gianfranco; Zapperi, Stefano Journal of Applied Physics, Vol. 85, Issue 8 https://doi.org/10.1063/1.369122	journal	April 1999
Jerky elasticity: Avalanches and the martensitic transition in Cu74.08Al23.13Be2.79 shape-memory alloy Salje, Ekhard K. H.; Koppensteiner, Johannes; Reinecker, Marius Applied Physics Letters, Vol. 95, Issue 23 https://doi.org/10.1063/1.3269578	journal	December 2009
Portevin-Le chatelier instabilities in Al-3 Mg conditioned by strain rate and strain Balík, J.; Lukáč, P. Acta Metallurgica et Materialia, Vol. 41, Issue 5 https://doi.org/10.1016/0956-7151(93)90253-O	journal	May 1993
Effect of aging treatment on microstructure and properties of high-entropy Cu0.5CoCrFeNi alloy Lin, Chun-Ming; Tsai, Hsien-Lung; Bor, Hui-Yun Intermetallics, Vol. 18, Issue 6 https://doi.org/10.1016/j.intermet.2010.03.030	journal	June 2010
Superconducting Vortex Avalanches Field, Stuart; Witt, Jeff; Nori, Franco Physical Review Letters, Vol. 74, Issue 7 https://doi.org/10.1103/PhysRevLett.74.1206	journal	February 1995
Temperature dependence of serrated flows in compression in a bulk-metallic glass Jiang, W. H.; Jiang, F.; Liu, F. X. Applied Physics Letters, Vol. 89, Issue 26 https://doi.org/10.1063/1.2424275	journal	December 2006
Size effect on stability of shear-band propagation in bulk metallic glasses: an overview Yang, Y.; Liu, C. T. Journal of Materials Science, Vol. 47, Issue 1 https://doi.org/10.1007/s10853-011-5915-8	journal	September 2011
Serrated flow and tensile properties of a Mg–Gd–Zn alloy Wu, D.; Chen, R. S.; Han, E. H. Materials Science and Engineering: A, Vol. 532 https://doi.org/10.1016/j.msea.2011.10.090	journal	January 2012
The mechanism of power-law scaling behavior by controlling shear bands in bulk metallic glass Wang, Z.; Qiao, J. W.; Wang, G. Materials Science and Engineering: A, Vol. 639 https://doi.org/10.1016/j.msea.2015.05.074	journal	July 2015
Statistical characterization of Barkhausen noise O’Brien, Kevin P.; Weissman, M. B. Physical Review E, Vol. 50, Issue 5 https://doi.org/10.1103/PhysRevE.50.3446	journal	November 1994
The effect of precipitates on characteristics of serrated flow in AlZn5Mg1 Pink, E. Acta Metallurgica, Vol. 37, Issue 7 https://doi.org/10.1016/0001-6160(89)90062-X	journal	July 1989
The hidden order behind jerky flow Bharathi, M. S.; Lebyodkin, M.; Ananthakrishna, G. Acta Materialia, Vol. 50, Issue 11 https://doi.org/10.1016/S1359-6454(02)00099-X	journal	June 2002
Interaction between dislocations and alloying elements and its implication on crystal plasticity of aluminum alloys Yang, Seung-Yong; Tong, Wei Materials Science and Engineering: A, Vol. 309-310 https://doi.org/10.1016/S0921-5093(00)01675-0	journal	July 2001
Deformation twinning Christian, J. W.; Mahajan, S. Progress in Materials Science, Vol. 39, Issue 1-2 https://doi.org/10.1016/0079-6425(94)00007-7	journal	January 1995
Two mechanisms for the normal and inverse behaviors of the critical strain for the Portevin–Le Chatelier effect Fu, Shihua; Cheng, Teng; Zhang, Qingchuan Acta Materialia, Vol. 60, Issue 19 https://doi.org/10.1016/j.actamat.2012.08.035	journal	November 2012
Effect of strain rate on the tensile properties of unirradiated and irradiated V–4Cr–4Ti Rowcliffe, A. F.; Zinkle, S. J.; Hoelzer, D. T. Journal of Nuclear Materials, Vol. 283-287 https://doi.org/10.1016/S0022-3115(00)00311-1	journal	December 2000
Effect of temperature and strain rate on serrated flow behaviour of Hastelloy X Sakthivel, T.; Laha, K.; Nandagopal, M. Materials Science and Engineering: A, Vol. 534 https://doi.org/10.1016/j.msea.2011.12.011	journal	February 2012
Role of dynamic strain ageing in low cycle fatigue Mannan, S. L. Bulletin of Materials Science, Vol. 16, Issue 6 https://doi.org/10.1007/BF02757656	journal	December 1993
Serrated flow and abnormal strain rate sensitivity of a magnesium–lithium alloy Wang, Cong; Xu, Yongbo; Han, Enhou Materials Letters, Vol. 60, Issue 24 https://doi.org/10.1016/j.matlet.2006.02.093	journal	October 2006
Disorder-driven first-order phase transformations: A model for hysteresis Dahmen, Karin; Kartha, Sivan; Krumhansl, James A. Journal of Applied Physics, Vol. 75, Issue 10 https://doi.org/10.1063/1.355522	journal	May 1994
Slow strain-hardening of ingot iron Sleeswyk, A. W. Acta Metallurgica, Vol. 6, Issue 9 https://doi.org/10.1016/0001-6160(58)90101-9	journal	September 1958
Analysis on the amplitude of serrated flow associated with the Portevin-LeChatelier effect of substitutional fee alloys Chen, M. C.; Chen, L. H.; Lui, T. S. Metallurgical and Materials Transactions A, Vol. 27, Issue 6 https://doi.org/10.1007/BF02649826	journal	June 1996
Evolution of the average avalanche shape with the universality class Laurson, Lasse; Illa, Xavier; Santucci, Stéphane Nature Communications, Vol. 4, Issue 1 https://doi.org/10.1038/ncomms3927	journal	December 2013
Localized heating and fracture criterion for bulk metallic glasses Yang, B.; Liu, C. T.; Nieh, T. G. Journal of Materials Research, Vol. 21, Issue 4 https://doi.org/10.1557/jmr.2006.0124	journal	April 2006
A microscopic mechanism for steady state inhomogeneous flow in metallic glasses Spaepen, Frans Acta Metallurgica, Vol. 25, Issue 4 https://doi.org/10.1016/0001-6160(77)90232-2	journal	April 1977
Patterns of serrated flow in a low-carbon steel Pink, Erwin; Kumar, Subodh Materials Science and Engineering: A, Vol. 201, Issue 1-2 https://doi.org/10.1016/0921-5093(95)09772-4	journal	October 1995
Avalanches, Barkhausen Noise, and Plain Old Criticality Perković, Olga; Dahmen, Karin; Sethna, James P. Physical Review Letters, Vol. 75, Issue 24 https://doi.org/10.1103/PhysRevLett.75.4528	journal	December 1995
Hidden order in serrated flow of metallic glasses Sarmah, Ritupan; Ananthakrishna, G.; Sun, B. A. Acta Materialia, Vol. 59, Issue 11 https://doi.org/10.1016/j.actamat.2011.03.071	journal	June 2011
Serrated flow behavior in a near alpha titanium alloy IMI 834 Prasad, Kartik; Varma, Vijay. K. Materials Science and Engineering: A, Vol. 486, Issue 1-2 https://doi.org/10.1016/j.msea.2007.09.020	journal	July 2008
Stochastic Models That Separate Fractal Dimension and the Hurst Effect Gneiting, Tilmann; Schlather, Martin SIAM Review, Vol. 46, Issue 2 https://doi.org/10.1137/S0036144501394387	journal	January 2004
Statistical signatures of self-organization O’Brien, Kevin P.; Weissman, M. B. Physical Review A, Vol. 46, Issue 8 https://doi.org/10.1103/PhysRevA.46.R4475	journal	October 1992
Microstructural and mechanical influences on dynamic strain aging phenomena Robinson, J. M.; Shaw, M. P. International Materials Reviews, Vol. 39, Issue 3 https://doi.org/10.1179/imr.1994.39.3.113	journal	January 1994
Corrosion and Serration Behaviors of TiZr0.5NbCr0.5VxMoy High Entropy Alloys in Aqueous Environments Li, Jiemin; Yang, Xiao; Zhu, Ruanli Metals, Vol. 4, Issue 4 https://doi.org/10.3390/met4040597	journal	December 2014
Hot deformation behaviour and processing map of Co-Cu-Fe-Ni-Ti eutectic high entropy alloy Samal, Sumanta; Rahul, M. R.; Kottada, Ravi Sankar Materials Science and Engineering: A, Vol. 664 https://doi.org/10.1016/j.msea.2016.04.006	journal	May 2016
Flow behavior of an Eyring fluid in a nanotube: The effect of the slip boundary condition Yang, Fuqian Applied Physics Letters, Vol. 90, Issue 13 https://doi.org/10.1063/1.2717019	journal	March 2007
Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy Zou, Yu; Maiti, Soumyadipta; Steurer, Walter Acta Materialia, Vol. 65 https://doi.org/10.1016/j.actamat.2013.11.049	journal	February 2014
Precipitate-dislocation interaction mediated Portevin-Le Chatelier-like effect in a beta-stabilized Ti-Mo-Nb-Al alloy Choudhuri, Deep; Mantri, Srinivas Aditya; Alam, Talukder Scripta Materialia, Vol. 124 https://doi.org/10.1016/j.scriptamat.2016.06.043	journal	November 2016
The influence of grain size on the nature of portevin-lechatelier yielding Charnock, W. The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, Vol. 18, Issue 151 https://doi.org/10.1080/14786436808227311	journal	July 1968
Dynamics of a Domain Wall in Soft-Magnetic Materials: Barkhausen Effect and Relation with Sandpile Models Vázquez, Alexei; Sotolongo-Costa, Oscar Physical Review Letters, Vol. 84, Issue 6 https://doi.org/10.1103/PhysRevLett.84.1316	journal	February 2000
Prediction of flow stress in dynamic strain aging regime of austenitic stainless steel 316 using artificial neural network Gupta, Amit Kumar; Singh, Swadesh Kumar; Reddy, Swathi Materials & Design, Vol. 35 https://doi.org/10.1016/j.matdes.2011.09.060	journal	March 2012
High Junction and Twin Boundary Densities in Driven Dynamical Systems Ding, X.; Zhao, Z.; Lookman, T. Advanced Materials, Vol. 24, Issue 39 https://doi.org/10.1002/adma.201200986	journal	July 2012
The twin mechanism of Portevin Le Chatelier in Mg–5Li–3Al–1.5Zn–2RE alloy Li, T. Q.; Liu, Y. B.; Cao, Z. Y. Journal of Alloys and Compounds, Vol. 509, Issue 28 https://doi.org/10.1016/j.jallcom.2011.04.099	journal	July 2011
A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys Lu, Yiping; Dong, Yong; Guo, Sheng Scientific Reports, Vol. 4, Issue 1 https://doi.org/10.1038/srep06200	journal	August 2014
On the nature of the yield point phenomenon Schwab, Rainer; Ruff, Volker Acta Materialia, Vol. 61, Issue 5 https://doi.org/10.1016/j.actamat.2012.12.003	journal	March 2013
Superelasticity and Serration Behavior in Small-Sized NiMnGa Alloys: Superelasticity and Serration Behavior … Zhang, Yong; Li, Min; Wang, Yan Dong Advanced Engineering Materials, Vol. 16, Issue 8 https://doi.org/10.1002/adem.201300518	journal	June 2014
Evolution of hidden localized flow during glass-to-liquid transition in metallic glass Wang, Z.; Sun, B. A.; Bai, H. Y. Nature Communications, Vol. 5, Issue 1 https://doi.org/10.1038/ncomms6823	journal	December 2014
Discontinuous deformation in Al-Mg alloys under various conditions Fujita, Hiroshi; Tabata, Teizo Acta Metallurgica, Vol. 25, Issue 7 https://doi.org/10.1016/0001-6160(77)90094-3	journal	July 1977
Power laws, flicker noise, and the Barkhausen effect Meisel, L. V.; Cote, P. J. Physical Review B, Vol. 46, Issue 17 https://doi.org/10.1103/PhysRevB.46.10822	journal	November 1992
Super Plastic Bulk Metallic Glasses at Room Temperature Liu, Y. H.; Wang, G.; Wang, R. J. Science, Vol. 315, Issue 5817 https://doi.org/10.1126/science.1136726	journal	March 2007
Tensile behavior of 3104 aluminum alloy processed by homogenization and cryogenic treatment Zhang, Wen-da; Bai, Pei-kang; Yang, Jing Transactions of Nonferrous Metals Society of China, Vol. 24, Issue 8 https://doi.org/10.1016/S1003-6326(14)63370-7	journal	August 2014
Scaling behavior and complexity of plastic deformation for a bulk metallic glass at cryogenic temperatures Chen, Cun; Ren, Jingli; Wang, Gang Physical Review E, Vol. 92, Issue 1 https://doi.org/10.1103/PhysRevE.92.012113	journal	July 2015
Tuned Critical Avalanche Scaling in Bulk Metallic Glasses Antonaglia, James; Xie, Xie; Schwarz, Gregory Scientific Reports, Vol. 4, Issue 1 https://doi.org/10.1038/srep04382	journal	March 2014
Serrated flow in nanostructured binary Mg-Al alloys Pozuelo, M.; Chang, Y. W.; Marian, J. Scripta Materialia, Vol. 127 https://doi.org/10.1016/j.scriptamat.2016.09.019	journal	January 2017
Serrated yielding in the B2-ordered Nb–15Al–20V alloy Rong, T. S. Intermetallics, Vol. 11, Issue 2 https://doi.org/10.1016/S0966-9795(02)00196-6	journal	February 2003
Serration Dynamics in a Zr-Based Bulk Metallic Glass Wang, Z.; Qiao, J. W.; Yang, H. J. Metallurgical and Materials Transactions A, Vol. 46, Issue 6 https://doi.org/10.1007/s11661-014-2483-y	journal	August 2014
Metallic glass matrix composites Qiao, Junwei; Jia, Haoling; Liaw, Peter K. Materials Science and Engineering: R: Reports, Vol. 100 https://doi.org/10.1016/j.mser.2015.12.001	journal	February 2016
Spatiotemporally inhomogeneous plastic flow of a bulk-metallic glass Jiang, W.; Fan, G.; Liu, F. International Journal of Plasticity, Vol. 24, Issue 1 https://doi.org/10.1016/j.ijplas.2007.01.015	journal	January 2008
Independence of Slip Velocities on Applied Stress in Small Crystals Maaß, R.; Derlet, P. M.; Greer, J. R. Small, Vol. 11, Issue 3 https://doi.org/10.1002/smll.201400849	journal	September 2014
Temperature Effects on Deformation and Serration Behavior of High-Entropy Alloys (HEAs) Antonaglia, J.; Xie, X.; Tang, Z. JOM, Vol. 66, Issue 10 https://doi.org/10.1007/s11837-014-1130-9	journal	September 2014
Plasticity and Dislocation Dynamics in a Phase Field Crystal Model Chan, Pak Yuen; Tsekenis, Georgios; Dantzig, Jonathan Physical Review Letters, Vol. 105, Issue 1 https://doi.org/10.1103/PhysRevLett.105.015502	journal	June 2010
Tunable scaling behaviour observed in Barkhausen criticality of a ferromagnetic film Ryu, Kwang-Su; Akinaga, Hiro; Shin, Sung-Chul Nature Physics, Vol. 3, Issue 8 https://doi.org/10.1038/nphys659	journal	July 2007
Dislocation Avalanches, Strain Bursts, and the Problem of Plastic Forming at the Micrometer Scale Csikor, F. F.; Motz, C.; Weygand, D. Science, Vol. 318, Issue 5848 https://doi.org/10.1126/science.1143719	journal	October 2007
Inhomogeneous to homogeneous transition in an Au-based metallic glass and its deformation maps Song, S. X.; Jang, J. S. C.; Huang, J. C. Intermetallics, Vol. 18, Issue 4 https://doi.org/10.1016/j.intermet.2009.11.009	journal	April 2010
Oscillatory Modes of Plastic Deformation: Theoretical Concepts Zaiser, M.; H�hner, P. physica status solidi (b), Vol. 199, Issue 2 https://doi.org/10.1002/1521-3951(199702)199:2<267::AID-PSSB267>3.0.CO;2-Q	journal	February 1997
The large-scale organization of metabolic networks Jeong, H.; Tombor, B.; Albert, R. Nature, Vol. 407, Issue 6804 https://doi.org/10.1038/35036627	journal	October 2000
The β-relaxation in metallic glasses Yu, Hai Bin; Wang, Wei Hua; Bai, Hai Yang National Science Review, Vol. 1, Issue 3 https://doi.org/10.1093/nsr/nwu018	journal	June 2014
Activation energy for serrated flow in type 316L(N) austenitic stainless steel Choudhary, B. K. Materials Science and Engineering: A, Vol. 603 https://doi.org/10.1016/j.msea.2014.02.083	journal	May 2014
Portevin–LeChatelier effect in strain and stress controlled tensile tests Klose, F. B.; Ziegenbein, A.; Weidenmüller, J. Computational Materials Science, Vol. 26 https://doi.org/10.1016/S0927-0256(02)00405-6	journal	January 2003
The dependence of shear modulus on dynamic relaxation and evolution of local structural heterogeneity in a metallic glass Huo, L. S.; Zeng, J. F.; Wang, W. H. Acta Materialia, Vol. 61, Issue 12 https://doi.org/10.1016/j.actamat.2013.04.004	journal	July 2013
Indentation behavior of a ZCAP-3 bulk metallic glass: Effects of the fatigue deformation Yang, Fuqian; Dang, Hongmei; Wang, Gongyao Journal of Materials Research, Vol. 24, Issue 7 https://doi.org/10.1557/jmr.2009.0270	journal	July 2009
The Portevin-Le Chatelier effect in an Al-Mg-Si alloy McCormick, P. G. Acta Metallurgica, Vol. 19, Issue 5 https://doi.org/10.1016/0001-6160(71)90170-2	journal	May 1971
Flow serration in a Zr-based bulk metallic glass in compression at low strain rates Song, S. X.; Bei, H.; Wadsworth, J. Intermetallics, Vol. 16, Issue 6 https://doi.org/10.1016/j.intermet.2008.03.007	journal	June 2008
Analysis of power-law exponents by maximum-likelihood maps Baró, Jordi; Vives, Eduard Physical Review E, Vol. 85, Issue 6 https://doi.org/10.1103/PhysRevE.85.066121	journal	June 2012
Dynamics of serrated flow in a bulk metallic glass Ren, J. L.; Chen, C.; Wang, G. AIP Advances, Vol. 1, Issue 3 https://doi.org/10.1063/1.3643218	journal	September 2011
On discontinuous plastic states, with special reference to localized necking in thin sheets Hill, R. Journal of the Mechanics and Physics of Solids, Vol. 1, Issue 1 https://doi.org/10.1016/0022-5096(52)90003-3	journal	October 1952
Crackling Noise in Disordered Materials Salje, Ekhard K. H.; Dahmen, Karin A. Annual Review of Condensed Matter Physics, Vol. 5, Issue 1 https://doi.org/10.1146/annurev-conmatphys-031113-133838	journal	March 2014
Serrated yielding due to Portevin - Le Chatelier effect in commercial Al-Mg alloys Chihab, K. Annales de Chimie Science des Matériaux, Vol. 27, Issue 1 https://doi.org/10.1016/S0151-9107(02)85008-5	journal	February 2002
Probing Stochastic Nano-Scale Inelastic Events in Stressed Amorphous Metal Yang, Y.; Fu, X. L.; Wang, S. Scientific Reports, Vol. 4, Issue 1 https://doi.org/10.1038/srep06699	journal	October 2014
Compressive Behavior of a Zr-Based Metallic Glass at Cryogenic Temperatures Li, H.; Fan, C.; Tao, K. Advanced Materials, Vol. 18, Issue 6 https://doi.org/10.1002/adma.200501990	journal	March 2006
A fracture-resistant high-entropy alloy for cryogenic applications Gludovatz, B.; Hohenwarter, A.; Catoor, D. Science, Vol. 345, Issue 6201 https://doi.org/10.1126/science.1254581	journal	September 2014
Self-Similar Random Process and Chaotic Behavior In Serrated Flow of High Entropy Alloys Chen, Shuying; Yu, Liping; Ren, Jingli Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep29798	journal	July 2016
Repeated discontinuous yielding of 2024 aluminum alloy Rosen, A.; Bodner, S. R. Materials Science and Engineering, Vol. 4, Issue 2-3 https://doi.org/10.1016/0025-5416(69)90051-2	journal	May 1969
Precipitation and serrated flow in AlZn10 Pink, Erwin; Król, Janusz Acta Metallurgica et Materialia, Vol. 43, Issue 6 https://doi.org/10.1016/0956-7151(94)00431-5	journal	June 1995
A proposed model for the disappearance of serrated flow in two Fe alloys Hayes, R. W.; Hayes, W. C. Acta Metallurgica, Vol. 32, Issue 2 https://doi.org/10.1016/0001-6160(84)90054-3	journal	February 1984
Homogeneous deformation of metallic glass at room temperature reveals large dilatation Ke, H. B.; Wen, P.; Peng, H. L. Scripta Materialia, Vol. 64, Issue 10 https://doi.org/10.1016/j.scriptamat.2011.01.047	journal	May 2011
The strain dependence of static and dynamic strain-aging Van Den Beukel, A.; Kocks, U. F. Acta Metallurgica, Vol. 30, Issue 5 https://doi.org/10.1016/0001-6160(82)90211-5	journal	May 1982
Radiation-damage in molybdenum–rhenium alloys for space reactor applications Busby, J. T.; Leonard, K. J.; Zinkle, S. J. Journal of Nuclear Materials, Vol. 366, Issue 3 https://doi.org/10.1016/j.jnucmat.2007.03.028	journal	July 2007
Intrinsic and extrinsic size effects in the deformation of metallic glass nanopillars Kuzmin, O. V.; Pei, Y. T.; Chen, C. Q. Acta Materialia, Vol. 60, Issue 3 https://doi.org/10.1016/j.actamat.2011.11.023	journal	February 2012
Strain rate sensitivity and transient behaviour in an AlMgSi alloy Ling, C. P.; McCormick, P. G. Acta Metallurgica et Materialia, Vol. 38, Issue 12 https://doi.org/10.1016/0956-7151(90)90275-L	journal	December 1990
Crackling Dynamics in Material Failure as the Signature of a Self-Organized Dynamic Phase Transition Bonamy, D.; Santucci, S.; Ponson, L. Physical Review Letters, Vol. 101, Issue 4 https://doi.org/10.1103/PhysRevLett.101.045501	journal	July 2008
Tensile softening of metallic-glass-matrix composites in the supercooled liquid region Qiao, J. W.; Zhang, Y.; Jia, H. L. Applied Physics Letters, Vol. 100, Issue 12 https://doi.org/10.1063/1.3696026	journal	March 2012
Strain rate-dependent deformation in bulk metallic glasses Nieh, T. G.; Schuh, C.; Wadsworth, J. Intermetallics, Vol. 10, Issue 11-12 https://doi.org/10.1016/S0966-9795(02)00146-2	journal	November 2002
Serrated flow and work hardening characteristics of Al-5356 alloy Saad, G.; Fayek, S. A.; Fawzy, A. Journal of Alloys and Compounds, Vol. 502, Issue 1 https://doi.org/10.1016/j.jallcom.2010.04.119	journal	July 2010
Deformation behavior and the Portevin-Le Chatelier effect in a modified 18Cr–8Ni stainless steel Nikulin, I.; Kaibyshev, R. Materials Science and Engineering: A, Vol. 528, Issue 3 https://doi.org/10.1016/j.msea.2010.10.056	journal	January 2011
Dynamic strain ageing in Ni-base superalloy 720Li Gopinath, K.; Gogia, A. K.; Kamat, S. V. Acta Materialia, Vol. 57, Issue 4 https://doi.org/10.1016/j.actamat.2008.11.005	journal	February 2009
Theory of the effect of dynamic strain aging on mechanical properties van den Beukel, A. Physica Status Solidi (a), Vol. 30, Issue 1 https://doi.org/10.1002/pssa.2210300120	journal	July 1975
The morphology of Portevin–Le Chatelier bands: finite element simulation for Al–Mg–Si Zhang, S.; McCormick, P. G.; Estrin, Y. Acta Materialia, Vol. 49, Issue 6 https://doi.org/10.1016/S1359-6454(00)00380-3	journal	April 2001
Modelling the transient flow behaviour of dynamic strain ageing materials Estrin, Y.; McCormick, P. G. Acta Metallurgica et Materialia, Vol. 39, Issue 12 https://doi.org/10.1016/0956-7151(91)90030-5	journal	December 1991
Dynamics of a Ferromagnetic Domain Wall and the Barkhausen Effect Cizeau, Pierre; Zapperi, Stefano; Durin, Gianfranco Physical Review Letters, Vol. 79, Issue 23 https://doi.org/10.1103/PhysRevLett.79.4669	journal	December 1997
Statistics of the Catastrophic Slip Events in the Portevin–Le Châtelier Effect Lebyodkin, M. A.; Brechet, Y.; Estrin, Y. Physical Review Letters, Vol. 74, Issue 23 https://doi.org/10.1103/PhysRevLett.74.4758	journal	June 1995
Mechanistic Modeling of Dynamic Strain Aging in Austenitic Stainless Steels de Almeida, L. H.; Le May, I.; Emygdio, P. R. O. Materials Characterization, Vol. 41, Issue 4 https://doi.org/10.1016/S1044-5803(98)00031-X	journal	October 1998
Grain size dependence of serrated yielding in a pressurized low carbon steel Barker, J. P.; McCormick, P. G. Scripta Metallurgica, Vol. 9, Issue 2 https://doi.org/10.1016/0036-9748(75)90584-0	journal	February 1975
The influence of specimen geometry on the Portevin-Le Chatelier effect in an AlMg alloy Robinson, J. M.; Shaw, M. P. Materials Science and Engineering: A, Vol. 159, Issue 2 https://doi.org/10.1016/0921-5093(92)90284-8	journal	December 1992
Study on dynamic strain aging phenomenon of 3004 aluminum alloy Peng, Kaiping; Chen, Wenzhe; Qian, Kuangwu Materials Science and Engineering: A, Vol. 415, Issue 1-2 https://doi.org/10.1016/j.msea.2005.08.216	journal	January 2006
A mechanism for the negative strain-rate sensitivity of dilute solid solutions Picu, R. C. Acta Materialia, Vol. 52, Issue 12 https://doi.org/10.1016/j.actamat.2004.03.042	journal	July 2004
Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy Santodonato, Louis J.; Zhang, Yang; Feygenson, Mikhail Nature Communications, Vol. 6, Issue 1 https://doi.org/10.1038/ncomms6964	journal	January 2015
On the mechanism of delayed discontinuous plastic flow in an age-hardened nickel alloy Hayes, R. W.; Hayes, W. C. Acta Metallurgica, Vol. 30, Issue 7 https://doi.org/10.1016/0001-6160(82)90148-1	journal	July 1982
Effect of aspect ratio on the compressive deformation and fracture behaviour of Zr-based bulk metallic glass Zhang, Z. F.; Zhang, H.; Pan, X. F. Philosophical Magazine Letters, Vol. 85, Issue 10 https://doi.org/10.1080/09500830500395237	journal	October 2005
The tensile response of Mo, Mo–Re and Mo–Si solid solutions Yu, X. J.; Kumar, K. S. International Journal of Refractory Metals and Hard Materials, Vol. 41 https://doi.org/10.1016/j.ijrmhm.2013.05.005	journal	November 2013
Shear-Band Dynamics in Metallic Glasses Maaß, Robert; Löffler, Jörg F. Advanced Functional Materials, Vol. 25, Issue 16 https://doi.org/10.1002/adfm.201404223	journal	March 2015
The Critical Conditions for Jerky Flow. Discussion and Application toCuMn Solid Solutions Kubin, L. P.; Estrin, Y. physica status solidi (b), Vol. 172, Issue 1 https://doi.org/10.1002/pssb.2221720117	journal	July 1992
The Portevin–Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy Halim, H.; Wilkinson, D.; Niewczas, M. Acta Materialia, Vol. 55, Issue 12 https://doi.org/10.1016/j.actamat.2007.03.007	journal	July 2007
Effect of grain size on serrated yielding in an Al-Mg-Si alloy Mccormick, P. G. Philosophical Magazine, Vol. 23, Issue 184 https://doi.org/10.1080/14786437108216997	journal	April 1971
LXXXVI. A note on the Portevin-Le Chatelier effect Cottrell, A. H. The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, Vol. 44, Issue 355 https://doi.org/10.1080/14786440808520347	journal	August 1953
Abnormal room temperature serrated flow and strain rate dependence of critical strain of a Fe–Mn–C twin-induced plasticity steel Qian, Lihe; Guo, Pengcheng; Zhang, Fucheng Materials Science and Engineering: A, Vol. 561 https://doi.org/10.1016/j.msea.2012.10.087	journal	January 2013
Emergence of Scaling in Random Networks Barabási, Albert-László; Albert, Réka Science, Vol. 286, Issue 5439 https://doi.org/10.1126/science.286.5439.509	journal	October 1999
Serrated flow of aluminium alloys influenced by precipitates Pink, Erwin; Kumar, Subodh; Tian, Baohui Materials Science and Engineering: A, Vol. 280, Issue 1 https://doi.org/10.1016/S0921-5093(99)00650-4	journal	March 2000
Inverse critical strains for jerky flow in Al-Mg alloys Balı́k, J.; Lukáč, P.; Kubin, L. P. Scripta Materialia, Vol. 42, Issue 5 https://doi.org/10.1016/S1359-6462(99)00373-5	journal	February 2000
Serrated yielding in AISI 316 stainless steel Samuel, K. G.; Mannan, S. L.; Rodriguez, P. Acta Metallurgica, Vol. 36, Issue 8 https://doi.org/10.1016/0001-6160(88)90331-8	journal	August 1988
An experimental and numerical investigation of the behaviour of AA5083 aluminium alloy in presence of the Portevin–Le Chatelier effect Benallal, A.; Berstad, T.; Børvik, T. International Journal of Plasticity, Vol. 24, Issue 10 https://doi.org/10.1016/j.ijplas.2008.03.008	journal	October 2008
Thermomechanical characterization of Portevin–Le Châtelier bands in AlMg3 (AA5754) and modeling based on a modified Estrin–McCormick approach Klusemann, Benjamin; Fischer, Gottfried; Böhlke, Thomas International Journal of Plasticity, Vol. 67 https://doi.org/10.1016/j.ijplas.2014.10.011	journal	April 2015
Evolution of dislocation densities and the critical conditions for the Portevin-Le Châtelier effect Kubin, L. P.; Estrin, Y. Acta Metallurgica et Materialia, Vol. 38, Issue 5 https://doi.org/10.1016/0956-7151(90)90021-8	journal	May 1990
Tuning avalanche criticality: Acoustic emission during the martensitic transformation of a compressed Ni-Mn-Ga single crystal Niemann, R.; Baró, J.; Heczko, O. Physical Review B, Vol. 86, Issue 21 https://doi.org/10.1103/PhysRevB.86.214101	journal	December 2012
The onset of serrated yielding in Au(Cu) alloys Wijler, A.; Vrijhoef, M. M. A.; Van Den Beukel, A. Acta Metallurgica, Vol. 22, Issue 1 https://doi.org/10.1016/0001-6160(74)90121-7	journal	January 1974
Origin of Intermittent Plastic Flow and Instability of Shear Band Sliding in Bulk Metallic Glasses Sun, B. A.; Pauly, S.; Hu, J. Physical Review Letters, Vol. 110, Issue 22 https://doi.org/10.1103/PhysRevLett.110.225501	journal	May 2013
Stress drops in serrated flow curves of A15Mg Pink, E.; Grinberg, A. Acta Metallurgica, Vol. 30, Issue 12 https://doi.org/10.1016/0001-6160(82)90136-5	journal	December 1982
Shear striations and deformation kinetics in highly deformed Zr-based bulk metallic glasses Dalla Torre, Florian H.; Dubach, Alban; Schällibaum, Justus Acta Materialia, Vol. 56, Issue 17 https://doi.org/10.1016/j.actamat.2008.05.021	journal	October 2008
The characteristics of serrated flow in superalloy IN738LC Sharghi-Moshtaghin, Reza; Asgari, Sirous Materials Science and Engineering: A, Vol. 486, Issue 1-2 https://doi.org/10.1016/j.msea.2007.09.061	journal	July 2008
Jamming is not just cool any more Liu, Andrea J.; Nagel, Sidney R. Nature, Vol. 396, Issue 6706 https://doi.org/10.1038/23819	journal	November 1998
Effect of size and base-element on the jerky flow dynamics in metallic glass Ke, H. B.; Sun, B. A.; Liu, C. T. Acta Materialia, Vol. 63 https://doi.org/10.1016/j.actamat.2013.10.023	journal	January 2014
Avalanches and clusters in planar crack front propagation Laurson, Lasse; Santucci, Stephane; Zapperi, Stefano Physical Review E, Vol. 81, Issue 4 https://doi.org/10.1103/PhysRevE.81.046116	journal	April 2010
Atomic-level structure and structure–property relationship in metallic glasses Cheng, Y. Q.; Ma, E. Progress in Materials Science, Vol. 56, Issue 4 https://doi.org/10.1016/j.pmatsci.2010.12.002	journal	May 2011
On the influence of precipitation on the Portevin-Le Chatelier effect Brechet, Y.; Estrin, Y. Acta Metallurgica et Materialia, Vol. 43, Issue 3 https://doi.org/10.1016/0956-7151(94)00334-E	journal	March 1995
On the grain-size dependence of the activation energy associated with serrated yielding Mukherjee, K.; D'Antonio, C.; Maciag, R. J. Scripta Metallurgica, Vol. 4, Issue 3 https://doi.org/10.1016/0036-9748(70)90194-8	journal	March 1970
Universality in models for disorder-induced phase transitions Vives, Eduard; Goicoechea, Jürgen; Ortín, Jordi Physical Review E, Vol. 52, Issue 1 https://doi.org/10.1103/PhysRevE.52.R5	journal	July 1995
On the critical character of plasticity in metallic single crystals Richeton, Thiebaud; Dobron, Patrik; Chmelik, Frantisek Materials Science and Engineering: A, Vol. 424, Issue 1-2 https://doi.org/10.1016/j.msea.2006.03.072	journal	May 2006
Micromechanical characterization of casting-induced inhomogeneity in an Al_0.8CoCrCuFeNi high-entropy alloy Liu, Zhiyuan; Guo, Sheng; Liu, Xiongjun Scripta Materialia, Vol. 64, Issue 9, p. 868-871 https://doi.org/10.1016/j.scriptamat.2011.01.020	journal	May 2011
1 ∕ f noise and avalanche scaling in plastic deformation Laurson, L.; Alava, M. J. Physical Review E, Vol. 74, Issue 6 https://doi.org/10.1103/PhysRevE.74.066106	journal	December 2006
Compositional dependence of shear-band dynamics in the Zr–Cu–Al bulk metallic glass system Thurnheer, P.; Maaß, R.; Pogatscher, S. Applied Physics Letters, Vol. 104, Issue 10 https://doi.org/10.1063/1.4867240	journal	March 2014
Stick–slip behavior of serrated flow during inhomogeneous deformation of bulk metallic glasses Dalla Torre, Florian H.; Klaumünzer, David; Maaß, Robert Acta Materialia, Vol. 58, Issue 10 https://doi.org/10.1016/j.actamat.2010.03.011	journal	June 2010
Mechanisms of serrated flow in aluminium alloys with precipitates investigated by acoustic emission Chmelı́k, F.; Pink, E.; Król, J. Acta Materialia, Vol. 46, Issue 12 https://doi.org/10.1016/S1359-6454(98)00070-6	journal	July 1998
Serrated flow behavior in 2090 Al–Li alloy influenced by texture and microstructure Shen, Y. Z.; Oh, K. H.; Lee, D. N. Materials Science and Engineering: A, Vol. 435-436 https://doi.org/10.1016/j.msea.2006.07.058	journal	November 2006
Mathematics of the portevin-le chatelier effect Penning, P. Acta Metallurgica, Vol. 20, Issue 10 https://doi.org/10.1016/0001-6160(72)90165-4	journal	October 1972
Avalanches in the growth of stress-induced martensites Carrillo, Lluís; Ortín, Jordi Physical Review B, Vol. 56, Issue 18 https://doi.org/10.1103/PhysRevB.56.11508	journal	November 1997
Inverse behaviour of the onset strain of serrated flow Kumar, Subodh Scripta Metallurgica et Materialia, Vol. 33, Issue 1 https://doi.org/10.1016/0956-716X(95)00099-H	journal	July 1995
Mechanical behavior of monocrystalline aluminum-lithium alloy at low temperatures Wang, Z. G.; Liu, W.; Xu, Y. B. Scripta Metallurgica et Materialia, Vol. 31, Issue 11 https://doi.org/10.1016/0956-716X(94)90066-3	journal	December 1994
Optimizing mechanical properties of AlCoCrFeNiTi x high-entropy alloys by tailoring microstructures Wang, Yinfeng; Ma, Shengguo; Chen, Xiaohua Acta Metallurgica Sinica (English Letters), Vol. 26, Issue 3 https://doi.org/10.1007/s40195-012-0174-5	journal	May 2013
Mechanical Properties Improvement of AlCrFeNi2Ti0.5 High Entropy Alloy through Annealing Design and its Relationship with its Particle-reinforced Microstructures Jiang, Li; Jiang, Hui; Lu, Yiping Journal of Materials Science & Technology, Vol. 31, Issue 4 https://doi.org/10.1016/j.jmst.2014.09.011	journal	April 2015
Localized shear deformation and softening of bulk metallic glass: stress or temperature driven? Ketov, S. V.; Louzguine-Luzgin, D. V. Scientific Reports, Vol. 3, Issue 1 https://doi.org/10.1038/srep02798	journal	October 2013
Micromechanical Model for Deformation in Solids with Universal Predictions for Stress-Strain Curves and Slip Avalanches Dahmen, Karin A.; Ben-Zion, Yehuda; Uhl, Jonathan T. Physical Review Letters, Vol. 102, Issue 17 https://doi.org/10.1103/PhysRevLett.102.175501	journal	April 2009
High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application Grässel, O.; Krüger, L.; Frommeyer, G. International Journal of Plasticity, Vol. 16, Issue 10-11 https://doi.org/10.1016/S0749-6419(00)00015-2	journal	January 2000
Making metallic glasses plastic by control of residual stress Zhang, Y.; Wang, W. H.; Greer, A. L. Nature Materials, Vol. 5, Issue 11 https://doi.org/10.1038/nmat1758	journal	October 2006
Serrated flow in a ferritic stainless steel Pink, Erwin; Grinberg, Adolfo Materials Science and Engineering, Vol. 51, Issue 1 https://doi.org/10.1016/0025-5416(81)90099-9	journal	November 1981
Slip statistics of dislocation avalanches under different loading modes Maaß, R.; Wraith, M.; Uhl, J. T. Physical Review E, Vol. 91, Issue 4 https://doi.org/10.1103/PhysRevE.91.042403	journal	April 2015
Driving-Induced Crossover: From Classical Criticality to Self-Organized Criticality Pérez-Reche, Francisco-José; Truskinovsky, Lev; Zanzotto, Giovanni Physical Review Letters, Vol. 101, Issue 23 https://doi.org/10.1103/PhysRevLett.101.230601	journal	December 2008
A Brief Review of High Entropy Alloys and Serration Behavior and Flow Units Zhang, Yong; Qiao, Jun-wei; Liaw, Peter K. Journal of Iron and Steel Research International, Vol. 23, Issue 1 https://doi.org/10.1016/S1006-706X(16)30002-4	journal	January 2016
Phenomene portevin-le chatelier dans les alliages Al-Mg a hautes temperatures, en fonction de la concentration Guillot, J.; Grilhe, J. Acta Metallurgica, Vol. 20, Issue 2 https://doi.org/10.1016/0001-6160(72)90191-5	journal	February 1972
Phase transformation induced by lattice distortion in multiprincipal component CoCrFeNiCuxAl1−x solid-solution alloys Zhou, Y. J.; Zhang, Y.; Wang, F. J. Applied Physics Letters, Vol. 92, Issue 24 https://doi.org/10.1063/1.2938690	journal	June 2008
Multi-step shear banding for bulk metallic glasses at ambient and cryogenic temperatures Qiao, J. W.; Jia, H. L.; Zhang, Y. Materials Chemistry and Physics, Vol. 136, Issue 1 https://doi.org/10.1016/j.matchemphys.2012.06.033	journal	September 2012
Serrated flow in Ni-C alloys Nakada, Y.; Keh, A. S. Acta Metallurgica, Vol. 18, Issue 4 https://doi.org/10.1016/0001-6160(70)90129-X	journal	April 1970
Shear strain in a shear band of a bulk-metallic glass in compression Jiang, W. H.; Liu, F. X.; Liaw, P. K. Applied Physics Letters, Vol. 90, Issue 18 https://doi.org/10.1063/1.2734502	journal	April 2007
Domain-wall dynamics and Barkhausen effect in metallic ferromagnetic materials. II. Experiments Alessandro, Bruno; Beatrice, Cinzia; Bertotti, Giorgio Journal of Applied Physics, Vol. 68, Issue 6 https://doi.org/10.1063/1.346424	journal	September 1990
Domain‐wall dynamics and Barkhausen effect in metallic ferromagnetic materials. I. Theory Alessandro, Bruno; Beatrice, Cinzia; Bertotti, Giorgio Journal of Applied Physics, Vol. 68, Issue 6 https://doi.org/10.1063/1.346423	journal	September 1990
Plastic flow instabilities of L12 Co3Ti alloys at intermediate temperatures Takasugi, T.; Honjo, H.; Kaneno, Y. Acta Materialia, Vol. 50, Issue 4 https://doi.org/10.1016/S1359-6454(01)00378-0	journal	February 2002
The effect of γ′ size and alloy chemistry on dynamic strain ageing in advanced polycrystalline nickel base superalloys Grant, Benedict M. B.; Francis, Elisabeth M.; da Fonseca, João Quinta Materials Science and Engineering: A, Vol. 573 https://doi.org/10.1016/j.msea.2013.02.027	journal	June 2013
Serrated yielding in Al-Li base alloys Ilić, N.; Drobnjak, Dj.; Radmilović, V. Scripta Materialia, Vol. 34, Issue 7 https://doi.org/10.1016/1359-6462(95)00627-3	journal	April 1996
Effects of temperature and strain rate on tensile properties and activation energy for dynamic strain aging in alloy 625 Shankar, Vani; Valsan, M.; Rao, K. Bhanu Sankara Metallurgical and Materials Transactions A, Vol. 35, Issue 10 https://doi.org/10.1007/s11661-004-0057-0	journal	October 2004
Superelasticity of Cu–Ni–Al shape-memory fibers prepared by melt extraction technique Li, Dong-yue; Zhang, Shu-ling; Liao, Wei-bing International Journal of Minerals, Metallurgy, and Materials, Vol. 23, Issue 8 https://doi.org/10.1007/s12613-016-1308-y	journal	August 2016
Torsional instability in a precipitation hardened AlMgSi alloy McCormick, P. G. Scripta Metallurgica, Vol. 15, Issue 4 https://doi.org/10.1016/0036-9748(81)90227-1	journal	April 1981
Barkhausen noise: Elementary signals, power laws, and scaling relations Spasojević, Djordje; Bukvić, Srdjan; Milošević, Sava Physical Review E, Vol. 54, Issue 3 https://doi.org/10.1103/PhysRevE.54.2531	journal	September 1996
Tensile ductility and necking of metallic glass Guo, H.; Yan, P. F.; Wang, Y. B. Nature Materials, Vol. 6, Issue 10 https://doi.org/10.1038/nmat1984	journal	August 2007
Recent developments in stainless steels Lo, K. H.; Shek, C. H.; Lai, J. K. L. Materials Science and Engineering: R: Reports, Vol. 65, Issue 4-6 https://doi.org/10.1016/j.mser.2009.03.001	journal	May 2009
Lüders front propagation in low carbon steels Butler, J. F. Journal of the Mechanics and Physics of Solids, Vol. 10, Issue 4 https://doi.org/10.1016/0022-5096(62)90003-0	journal	October 1962
Effect of δ' precipitates on serrated flow Kumar, Subodh; Pink, Erwin Scripta Metallurgica et Materialia, Vol. 32, Issue 5 https://doi.org/10.1016/0956-716X(95)91597-I	journal	March 1995
A model for the Portevin-Le Chatelier effect in substitutional alloys McCormigk, P. G. Acta Metallurgica, Vol. 20, Issue 3 https://doi.org/10.1016/0001-6160(72)90028-4	journal	March 1972
Yield-point phenomena in substitutional alloys Brindley, B. J.; Worthington, P. J. International Materials Reviews, Vol. 15, Issue 1 https://doi.org/10.1179/imr.1970.15.1.101	journal	January 1970
Power-Law Statistics for Avalanches in a Martensitic Transformation Ahluwalia, Rajeev; Ananthakrishna, G. Physical Review Letters, Vol. 86, Issue 18 https://doi.org/10.1103/PhysRevLett.86.4076	journal	April 2001
Microstructural Characteristics and Mechanical Behaviors of AlCoCrFeNi High-Entropy Alloys at Ambient and Cryogenic Temperatures Qiao, Jun Wei; Ma, S. G.; Huang, E. W. Materials Science Forum, Vol. 688 https://doi.org/10.4028/www.scientific.net/MSF.688.419	journal	June 2011
Characteristics of dynamic strain ageing in binary f.c.c. copper alloys—I. Results on solid solutions of CuAl Nortmann, A.; Schwink, Ch. Acta Materialia, Vol. 45, Issue 5 https://doi.org/10.1016/S1359-6454(96)00292-3	journal	May 1997
Bulk Metallic Glasses Deform via Slip Avalanches Antonaglia, James; Wright, Wendelin J.; Gu, Xiaojun Physical Review Letters, Vol. 112, Issue 15 https://doi.org/10.1103/PhysRevLett.112.155501	journal	April 2014
Effective temperature dynamics of shear bands in metallic glasses Daub, Eric G.; Klaumünzer, David; Löffler, Jörg F. Physical Review E, Vol. 90, Issue 6 https://doi.org/10.1103/PhysRevE.90.062405	journal	December 2014
Influence of specimen width on the deformation and fracture behaviour of AA5182 sheets Straffelini, G.; Fontanari, V.; Zadra, M. Engineering Fracture Mechanics, Vol. 109 https://doi.org/10.1016/j.engfracmech.2013.07.007	journal	September 2013
Some aspects of serrated yielding in substitutional solid solutions of iron Cuddy, L. J.; Leslie, W. C. Acta Metallurgica, Vol. 20, Issue 10 https://doi.org/10.1016/0001-6160(72)90164-2	journal	October 1972
On the physics of the Portevin-Le Châtelier effect part 2: from microscopic to macroscopic behaviour Hähner, Peter Materials Science and Engineering: A, Vol. 207, Issue 2 https://doi.org/10.1016/0921-5093(95)10032-6	journal	March 1996
An acoustic emission study of the effect of a magnetic field on the martensitic transition in Ni2MnGa Ludwig, Benno; Strothkaemper, Christian; Klemradt, Uwe Applied Physics Letters, Vol. 94, Issue 12 https://doi.org/10.1063/1.3103289	journal	March 2009
Avalanches in Wood Compression Mäkinen, T.; Miksic, A.; Ovaska, M. Physical Review Letters, Vol. 115, Issue 5 https://doi.org/10.1103/PhysRevLett.115.055501	journal	July 2015
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys Guo, Sheng; Ng, Chun; Lu, Jian Journal of Applied Physics, Vol. 109, Issue 10 https://doi.org/10.1063/1.3587228	journal	May 2011
Universality beyond power laws and the average avalanche shape Papanikolaou, Stefanos; Bohn, Felipe; Sommer, Rubem Luis Nature Physics, Vol. 7, Issue 4 https://doi.org/10.1038/nphys1884	journal	January 2011
Ecology, evolution and 1f-noise Halley, John M. Trends in Ecology & Evolution, Vol. 11, Issue 1 https://doi.org/10.1016/0169-5347(96)81067-6	journal	January 1996
Dislocations Jam at Any Density Tsekenis, Georgios; Goldenfeld, Nigel; Dahmen, Karin A. Physical Review Letters, Vol. 106, Issue 10 https://doi.org/10.1103/PhysRevLett.106.105501	journal	March 2011
A transmission electron microscopic investigation of phase transformations in MP35N Raghavan, M.; Berkowitz, B. J.; Kane, R. D. Metallurgical Transactions A, Vol. 11, Issue 1 https://doi.org/10.1007/BF02700461	journal	December 1980
Effects of strain rate and temperature on tensile deformation and fracture behaviour of forged thick section 9Cr-1Mo ferritic steel Choudhary, B. K.; Rao, K. Bhanu Sankara; Mannan, S. L. International Journal of Pressure Vessels and Piping, Vol. 58, Issue 2 https://doi.org/10.1016/0308-0161(94)90078-7	journal	January 1994
Serrated plastic flow Rodriguez, P. Bulletin of Materials Science, Vol. 6, Issue 4 https://doi.org/10.1007/BF02743993	journal	September 1984
Acoustic emission in the fcc-fct martensitic transition of Fe 68.8 Pd 31.2 Bonnot, Erell; Mañosa, Lluís; Planes, Antoni Physical Review B, Vol. 78, Issue 18 https://doi.org/10.1103/PhysRevB.78.184103	journal	November 2008
Characterization of high temperature deformation behavior of INCONEL 617 Rahman, Md. S.; Priyadarshan, G.; Raja, K. S. Mechanics of Materials, Vol. 41, Issue 3 https://doi.org/10.1016/j.mechmat.2008.10.003	journal	March 2009
Serration Behavior in Zr-Cu-Al Glass-forming Systems Wang, Zhong; Li, Jiao-jiao; Ren, Li-wei Journal of Iron and Steel Research International, Vol. 23, Issue 1 https://doi.org/10.1016/S1006-706X(16)30009-7	journal	January 2016
The exploration of the effect of microstructure on crackling noise systems Faran, Eilon; Salje, Ekhard K. H.; Shilo, Doron Applied Physics Letters, Vol. 107, Issue 7 https://doi.org/10.1063/1.4928928	journal	August 2015
Kinetics of serrated flow in terms of dislocation interaction Hong, Kyung Tae; Nam, Soo Woo Acta Metallurgica, Vol. 37, Issue 1 https://doi.org/10.1016/0001-6160(89)90263-0	journal	January 1989
Compressive properties of bulk metallic glass with small aspect ratio Wu, F. F.; Zhang, Z. F.; Mao, S. X. Journal of Materials Research, Vol. 22, Issue 2 https://doi.org/10.1557/jmr.2007.0064	journal	February 2007
Experimental evidence on the dislocation mechanism of serrated yielding in f.c.c. metals and alloys at low temperatures Obst, B.; Nyilas, A. Materials Science and Engineering: A, Vol. 137 https://doi.org/10.1016/0921-5093(91)90328-K	journal	May 1991
Geometrically non-linear modeling of the Portevin–Le Chatelier effect Böhlke, T.; Bondár, G.; Estrin, Y. Computational Materials Science, Vol. 44, Issue 4 https://doi.org/10.1016/j.commatsci.2008.07.036	journal	February 2009
Serrated yielding in substitutional alloys Worthington, P. J.; Brindley, B. J. Philosophical Magazine, Vol. 19, Issue 162 https://doi.org/10.1080/14786436908228642	journal	June 1969
The problem of the negative strain-rate sensitivity of metals under the portevin-lechatelier deformation conditions Korbel, A.; Dybiec, H. Acta Metallurgica, Vol. 29, Issue 1 https://doi.org/10.1016/0001-6160(81)90089-4	journal	January 1981
Determination of the universality class of crystal plasticity Tsekenis, G.; Uhl, J. T.; Goldenfeld, N. EPL (Europhysics Letters), Vol. 101, Issue 3 https://doi.org/10.1209/0295-5075/101/36003	journal	February 2013
Microstructures and Crackling Noise of AlxNbTiMoV High Entropy Alloys Chen, Shu; Yang, Xiao; Dahmen, Karin Entropy, Vol. 16, Issue 2 https://doi.org/10.3390/e16020870	journal	February 2014
Achieving large macroscopic compressive plastic deformation and work-hardening-like behavior in a monolithic bulk metallic glass by tailoring stress distribution Chen, L. Y.; Ge, Q.; Qu, S. Applied Physics Letters, Vol. 92, Issue 21 https://doi.org/10.1063/1.2937141	journal	May 2008
Non-crystalline Structure in Solidified Gold–Silicon Alloys Klement, W.; Willens, R. H.; Duwez, Pol Nature, Vol. 187, Issue 4740 https://doi.org/10.1038/187869b0	journal	September 1960
Serration and Noise Behavior in Advanced Materials Zhang, Yong; Wang, Wei-hua; Liaw, Peter K. Journal of Iron and Steel Research International, Vol. 23, Issue 1 https://doi.org/10.1016/S1006-706X(16)30001-2	journal	January 2016
Threshold critical dynamics of driven interfaces in random media Narayan, Onuttom; Fisher, Daniel S. Physical Review B, Vol. 48, Issue 10 https://doi.org/10.1103/PhysRevB.48.7030	journal	September 1993
Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes Yeh, J.-W.; Chen, S.-K.; Lin, S.-J. Advanced Engineering Materials, Vol. 6, Issue 5, p. 299-303 https://doi.org/10.1002/adem.200300567	journal	May 2004
Power-law scaling between mean stress drops and strain rates in bulk metallic glasses Li, J. J.; Wang, Z.; Qiao, J. W. Materials & Design, Vol. 99 https://doi.org/10.1016/j.matdes.2016.03.092	journal	June 2016
Serration Behavior of a Zr-Based Metallic Glass Under Different Constrained Loading Conditions Yang, G. N.; Gu, J. L.; Chen, S. Q. Metallurgical and Materials Transactions A, Vol. 47, Issue 11 https://doi.org/10.1007/s11661-016-3685-2	journal	August 2016
Influence of strain rate and temperature on serrated flow in 9Cr–1Mo ferritic steel Choudhary, B. K. Materials Science and Engineering: A, Vol. 564 https://doi.org/10.1016/j.msea.2012.11.104	journal	March 2013
Mechanisms of Failure in Nanoscale Metallic Glass Gu, X. Wendy; Jafary-Zadeh, Mehdi; Chen, David Z. Nano Letters, Vol. 14, Issue 10 https://doi.org/10.1021/nl5027869	journal	September 2014
The effect of temperature on strain rate sensitivity in an AlMgSi alloy Ling, C. P.; McCormick, P. G. Acta Metallurgica et Materialia, Vol. 41, Issue 11 https://doi.org/10.1016/0956-7151(93)90042-Q	journal	November 1993
Enhancement of mechanical and electrochemical properties of Al0.25CrCoFe1.25Ni1.25 high-entropy alloys by coating Ni–P amorphous films Qiao, J. W.; Wang, Z.; Ren, L. W. Materials Science and Engineering: A, Vol. 657 https://doi.org/10.1016/j.msea.2016.01.092	journal	March 2016
Reply to “on the grain-size dependence of the activation energy associated with serrated yielding” Brindley, B. J.; Worthington, P. J. Scripta Metallurgica, Vol. 4, Issue 4 https://doi.org/10.1016/0036-9748(70)90124-9	journal	April 1970
Solid-Solution Phase Formation Rules for Multi-component Alloys Zhang, Y.; Zhou, Y. J.; Lin, J. P. Advanced Engineering Materials, Vol. 10, Issue 6, p. 534-538 https://doi.org/10.1002/adem.200700240	journal	June 2008
Serrated yielding in Aluminium-3% Magnesium Brindley, B. J.; Worthington, P. J. Acta Metallurgica, Vol. 17, Issue 11 https://doi.org/10.1016/0001-6160(69)90153-9	journal	November 1969
Self-Similar Barkhausen Noise in Magnetic Domain Wall Motion Narayan, Onuttom Physical Review Letters, Vol. 77, Issue 18 https://doi.org/10.1103/PhysRevLett.77.3855	journal	October 1996
Crossover from continuous to discontinuous propagation in the Portevin–Le Chatelier effect Ait-Amokhtar, H.; Fressengeas, C. Acta Materialia, Vol. 58, Issue 4 https://doi.org/10.1016/j.actamat.2009.10.038	journal	February 2010
Granular solids, liquids, and gases Jaeger, Heinrich M.; Nagel, Sidney R.; Behringer, Robert P. Reviews of Modern Physics, Vol. 68, Issue 4 https://doi.org/10.1103/RevModPhys.68.1259	journal	October 1996
Pseudo-portevin-le châtelier effect in ordered alloys Brechet, Y.; Estrin, Y. Scripta Materialia, Vol. 35, Issue 2 https://doi.org/10.1016/1359-6462(96)00126-1	journal	July 1996
The influence of specimen dimensions and machine stiffness on the portevin-Le chatelier effect in an Al–Cu alloy Van Den Brink, S. H.; Van Den Beukel, A.; McCormick, P. G. Physica Status Solidi (a), Vol. 41, Issue 2 https://doi.org/10.1002/pssa.2210410222	journal	June 1977
A General Model for the Origin of Allometric Scaling Laws in Biology West, G. B. Science, Vol. 276, Issue 5309 https://doi.org/10.1126/science.276.5309.122	journal	April 1997
Experiments and Model for Serration Statistics in Low-Entropy, Medium-Entropy and High-Entropy Alloys Carroll, Robert; Lee, Chi; Tsai, Che-Wei Scientific Reports, Vol. 5, Issue 1 https://doi.org/10.1038/srep16997	journal	November 2015
Effect of inertia on sheared disordered solids: Critical scaling of avalanches in two and three dimensions Salerno, K. Michael; Robbins, Mark O. Physical Review E, Vol. 88, Issue 6 https://doi.org/10.1103/PhysRevE.88.062206	journal	December 2013
Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys Wang, Woei-Ren; Wang, Wei-Lin; Wang, Shang-Chih Intermetallics, Vol. 26 https://doi.org/10.1016/j.intermet.2012.03.005	journal	July 2012
Hot deformation behaviour and microstructure control in AlCrCuNiFeCo high entropy alloy Nayan, Niraj; Singh, Gaurav; Murty, S. V. S. N. Intermetallics, Vol. 55 https://doi.org/10.1016/j.intermet.2014.07.019	journal	December 2014
Observations of serration characteristics and acoustic emission during serrated flow of an Al–Mg alloy Reed, Justin M.; Walter, Mark E. Materials Science and Engineering: A, Vol. 359, Issue 1-2 https://doi.org/10.1016/S0921-5093(02)00729-3	journal	October 2003
Serrated flow in Fe-28Mn-9Al-xC alloys in a temperature range of 573–873 K Zhu, S. M.; Tjong, S. C. Scripta Materialia, Vol. 36, Issue 3 https://doi.org/10.1016/S1359-6462(96)00376-4	journal	February 1997
Preparation and giant magneto-impedance behavior of Co-based amorphous wires Zhao, Yangyong; Hao, Haiying; Zhang, Yong Intermetallics, Vol. 42 https://doi.org/10.1016/j.intermet.2013.05.008	journal	November 2013
The kinetics of the Portevin-Le Chatelier bands in an Al-5at%Mg alloy Chihab, K.; Estrin, Y.; Kubin, L. P. Scripta Metallurgica, Vol. 21, Issue 2 https://doi.org/10.1016/0036-9748(87)90435-2	journal	February 1987
Orientation of Lüders band fronts Delwiche, D. E.; Moon, D. W. Materials Science and Engineering, Vol. 7, Issue 4 https://doi.org/10.1016/0025-5416(71)90146-7	journal	April 1971
The effect of dynamic annealing on dynamic strain aging phenomena in commercial purity titanium Donoso, J. R.; Watson, P. G.; Reed-Hill, R. E. Metallurgical Transactions A, Vol. 10, Issue 8 https://doi.org/10.1007/BF02811662	journal	August 1979
Intermittent dislocation flow in viscoplastic deformation Miguel, M. -Carmen; Vespignani, Alessandro; Zapperi, Stefano Nature, Vol. 410, Issue 6829 https://doi.org/10.1038/35070524	journal	April 2001
Avalanches in Strained Amorphous Solids: Does Inertia Destroy Critical Behavior? Salerno, K. Michael; Maloney, Craig E.; Robbins, Mark O. Physical Review Letters, Vol. 109, Issue 10 https://doi.org/10.1103/PhysRevLett.109.105703	journal	September 2012
Impurity-Dislocation Interaction and Repeated Yielding in a Commercial Al Alloy Mukherjee, K.; D'Antonio, C.; Maciag, R. Journal of Applied Physics, Vol. 39, Issue 12 https://doi.org/10.1063/1.1655994	journal	November 1968
Self-organized criticality and the Barkhausen effect Cote, P. J.; Meisel, L. V. Physical Review Letters, Vol. 67, Issue 10 https://doi.org/10.1103/PhysRevLett.67.1334	journal	September 1991
Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties Zhou, Y. J.; Zhang, Y.; Wang, Y. L. Applied Physics Letters, Vol. 90, Issue 18 https://doi.org/10.1063/1.2734517	journal	April 2007
Effect of serrated flow on deformation behaviour of AISI 403 stainless steel Gupta, C.; Chakravartty, J. K.; Wadekar, S. L. Materials Science and Engineering: A, Vol. 292, Issue 1 https://doi.org/10.1016/S0921-5093(00)00992-8	journal	November 2000
Portevin-Le chatelier effect in an AlMn alloy I: Serration characteristics Saha, G. G.; McCormick, P. G.; Rama Rao, P. Materials Science and Engineering, Vol. 62, Issue 2 https://doi.org/10.1016/0025-5416(84)90221-0	journal	February 1984
Interface Depinning, Self-Organized Criticality, and the Barkhausen Effect Urbach, J. S.; Madison, R. C.; Markert, J. T. Physical Review Letters, Vol. 75, Issue 2 https://doi.org/10.1103/PhysRevLett.75.276	journal	July 1995
Various sizes of sliding event bursts in the plastic flow of metallic glasses based on a spatiotemporal dynamic model Ren, Jingli; Chen, Cun; Wang, Gang Journal of Applied Physics, Vol. 116, Issue 3 https://doi.org/10.1063/1.4890720	journal	July 2014
Analysis of Portevin-Le Chatelier serrations of type Bin Al–Mg Klose, F. B.; Ziegenbein, A.; Hagemann, F. Materials Science and Engineering: A, Vol. 369, Issue 1-2 https://doi.org/10.1016/j.msea.2003.10.292	journal	March 2004
Mechanical properties of bulk metallic glasses Trexler, Morgana Martin; Thadhani, Naresh N. Progress in Materials Science, Vol. 55, Issue 8 https://doi.org/10.1016/j.pmatsci.2010.04.002	journal	November 2010
Spatial coupling in jerky flow using polycrystal plasticity Kok, S.; Bharathi, M. S.; Beaudoin, A. J. Acta Materialia, Vol. 51, Issue 13 https://doi.org/10.1016/S1359-6454(03)00114-9	journal	August 2003
On a proposed theory for the disappearance of serrated flow in f.c.c. Ni alloys Hayes, R. W. Acta Metallurgica, Vol. 31, Issue 3 https://doi.org/10.1016/0001-6160(83)90213-4	journal	March 1983
Precipitation during serrated flow in AlZn5Mg1 Pink, E.; Webernig, W. M. Acta Metallurgica, Vol. 35, Issue 1 https://doi.org/10.1016/0001-6160(87)90220-3	journal	January 1987
Finite element simulations of dynamic strain ageing effects at V-notches and crack tips Graff, S.; Forest, S.; Strudel, J. -L. Scripta Materialia, Vol. 52, Issue 11 https://doi.org/10.1016/j.scriptamat.2005.02.007	journal	June 2005
Serrated flow and stick–slip deformation dynamics in the presence of shear-band interactions for a Zr-based metallic glass Sun, B. A.; Pauly, S.; Tan, J. Acta Materialia, Vol. 60, Issue 10 https://doi.org/10.1016/j.actamat.2012.04.013	journal	June 2012
Design of a twinning-induced plasticity high entropy alloy Deng, Y.; Tasan, C. C.; Pradeep, K. G. Acta Materialia, Vol. 94 https://doi.org/10.1016/j.actamat.2015.04.014	journal	August 2015
Characterisation of the Portevin-Le Châtelier effect affecting an austenitic TWIP steel based on digital image correlation Renard, K.; Ryelandt, S.; Jacques, P. J. Materials Science and Engineering: A, Vol. 527, Issue 12 https://doi.org/10.1016/j.msea.2010.01.037	journal	May 2010
Confusion by design Greer, A. Lindsay Nature, Vol. 366, Issue 6453 https://doi.org/10.1038/366303a0	journal	December 1993
Plastic flow instability in a precipitation hardened AlZnMg alloy Wood, J.; McCormick, P. G. Acta Metallurgica, Vol. 35, Issue 1 https://doi.org/10.1016/0001-6160(87)90232-X	journal	January 1987
The distribution of stress-drop sizes in serrated flow of an aluminium alloy and a mild steel Pink, Erwin; Weinhandl, Herbert Scripta Materialia, Vol. 39, Issue 9 https://doi.org/10.1016/S1359-6462(98)00264-4	journal	October 1998
Microstructures and properties of high-entropy alloys Zhang, Yong; Zuo, Ting Ting; Tang, Zhi Progress in Materials Science, Vol. 61 https://doi.org/10.1016/j.pmatsci.2013.10.001	journal	April 2014
Submicron Plasticity: Yield Stress, Dislocation Avalanches, and Velocity Distribution Ispánovity, Péter Dusán; Groma, István; Györgyi, Géza Physical Review Letters, Vol. 105, Issue 8 https://doi.org/10.1103/PhysRevLett.105.085503	journal	August 2010
Glass-Forming Ability and Competitive Crystalline Phases for Lightweight Ti-Be–Based Alloys Zhang, Y.; Zhang, W. G.; Lin, J. P. Metallurgical and Materials Transactions A, Vol. 41, Issue 7 https://doi.org/10.1007/s11661-009-0122-9	journal	January 2010
A model for the flow stress and strain rate sensitivity of a substitutional alloy—Cu-3.1 at.% Sn Qian, K. W.; Reed-Hill, R. E. Acta Metallurgica, Vol. 31, Issue 1 https://doi.org/10.1016/0001-6160(83)90067-6	journal	January 1983
Self-driven mode switching of earthquake activity on a fault system Ben-Zion, Yehuda; Dahmen, Karin; Lyakhovsky, Vladimir Earth and Planetary Science Letters, Vol. 172, Issue 1-2 https://doi.org/10.1016/S0012-821X(99)00187-9	journal	October 1999
The effect of precipitation on the Portevin-Le Chatelier effect in an Al–Zn–Mg–Cu alloy Thevenet, D.; Mliha-Touati, M.; Zeghloul, A. Materials Science and Engineering: A, Vol. 266, Issue 1-2 https://doi.org/10.1016/S0921-5093(99)00029-5	journal	June 1999
Theory of flow localisation due to dynamic strain ageing McCormick, P. G. Acta Metallurgica, Vol. 36, Issue 12 https://doi.org/10.1016/0001-6160(88)90043-0	journal	December 1988
The initiation of serrated yielding at elevated temperatures Chaenock, W. Philosophical Magazine, Vol. 20, Issue 164 https://doi.org/10.1080/14786436908228714	journal	August 1969
Age Hardening of the Al0.5CoCrNiTi0.5 High-Entropy Alloy Lee, Che-Fu; Shun, Tao-Tsung Metallurgical and Materials Transactions A, Vol. 45, Issue 1 https://doi.org/10.1007/s11661-013-1931-4	journal	August 2013
Numerical modelling of the Portevin—Le Chatelier effect McCormick, P. G.; Ling, C. P. Acta Metallurgica et Materialia, Vol. 43, Issue 5 https://doi.org/10.1016/0956-7151(94)00390-4	journal	May 1995
Time distribution of stress drops, critical strain and crossover in the dynamics of jerky flow Chihab, K.; Fressengeas, C. Materials Science and Engineering: A, Vol. 356, Issue 1-2 https://doi.org/10.1016/S0921-5093(03)00141-2	journal	September 2003
Avalanche criticality in the martensitic transition of Cu 67.64 Zn 16.71 Al 15.65 shape-memory alloy: A calorimetric and acoustic emission study Gallardo, María Carmen; Manchado, Julia; Romero, Francisco Javier Physical Review B, Vol. 81, Issue 17 https://doi.org/10.1103/PhysRevB.81.174102	journal	May 2010
Ultrastrong ductile and stable high-entropy alloys at small scales Zou, Yu; Ma, Huan; Spolenak, Ralph Nature Communications, Vol. 6, Issue 1 https://doi.org/10.1038/ncomms8748	journal	July 2015
Searching for Next Single-Phase High-Entropy Alloy Compositions Gao, Michael; Alman, David Entropy, Vol. 15, Issue 12 https://doi.org/10.3390/e15104504	journal	October 2013
A simple analytic theory for the statistics of avalanches in sheared granular materials Dahmen, Karin A.; Ben-Zion, Yehuda; Uhl, Jonathan T. Nature Physics, Vol. 7, Issue 7 https://doi.org/10.1038/nphys1957	journal	March 2011
Low-temperature shear banding for a Cu-based bulk-metallic glass Qiao, J. W.; Jia, H. L.; Chuang, C. P. Scripta Materialia, Vol. 63, Issue 8 https://doi.org/10.1016/j.scriptamat.2010.06.039	journal	October 2010
The yield phenomenon in polycrystalline mild steel Lomer, W. M. Journal of the Mechanics and Physics of Solids, Vol. 1, Issue 1 https://doi.org/10.1016/0022-5096(52)90007-0	journal	October 1952
Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0≤x≤2) high-entropy alloys Kao, Yih-Farn; Chen, Ting-Jie; Chen, Swe-Kai Journal of Alloys and Compounds, Vol. 488, Issue 1 https://doi.org/10.1016/j.jallcom.2009.08.090	journal	November 2009
The tensile properties and high cyclic fatigue characteristics of Mg–5Li–3Al–1.5Zn-2RE alloy Li, Tingqu; Liu, Yongbing; Cao, Zhanyi Materials Science and Engineering: A, Vol. 527, Issue 29-30 https://doi.org/10.1016/j.msea.2010.08.094	journal	November 2010
Abnormal flow behavior and serrated flow in Al–Li single crystals Tian, B. H.; Zhang, Y. G.; Chen, C. Q. Materials Science and Engineering: A, Vol. 247, Issue 1-2 https://doi.org/10.1016/S0921-5093(97)00687-4	journal	June 1998
Serrated flow in Al−5 wt.% Mg alloy Kim, I. S.; Chaturvedi, M. C. Materials Science and Engineering, Vol. 37, Issue 2 https://doi.org/10.1016/0025-5416(79)90081-8	journal	February 1979
Insight into the deformation behavior of niobium single crystals under uniaxial compression and tension at the nanoscale Kim, Ju-Young; Jang, Dongchan; Greer, Julia R. Scripta Materialia, Vol. 61, Issue 3 https://doi.org/10.1016/j.scriptamat.2009.04.012	journal	August 2009
High–speed imaging of a bulk metallic glass during uniaxial compression Wright, Wendelin J.; Byer, Rachel R.; Gu, Xiaojun Applied Physics Letters, Vol. 102, Issue 24 https://doi.org/10.1063/1.4811744	journal	June 2013
High work-hardening rate and deformation twinning of Co-Ni-based superalloy at elevated temperatures Chiba, A.; Li, X. G.; Kim, M. S. Philosophical Magazine A, Vol. 79, Issue 7 https://doi.org/10.1080/01418619908210378	journal	July 1999
Hysteresis and hierarchies: Dynamics of disorder-driven first-order phase transformations Sethna, James P.; Dahmen, Karin; Kartha, Sivan Physical Review Letters, Vol. 70, Issue 21 https://doi.org/10.1103/PhysRevLett.70.3347	journal	May 1993
In situ nanocompression testing of irradiated copper Kiener, D.; Hosemann, P.; Maloy, S. A. Nature Materials, Vol. 10, Issue 8 https://doi.org/10.1038/nmat3055	journal	June 2011
Activation energy for serrated flow in a 15Cr-5Ni Ti-modified austenitic stainless steel Venkadesan, S.; Phaniraj, C.; Sivaprasad, P. V. Acta Metallurgica et Materialia, Vol. 40, Issue 3 https://doi.org/10.1016/0956-7151(92)90406-5	journal	March 1992
The mechanism of critical strain and serration type of the serrated flow in Mg–Nd–Zn alloy Wang, W. H.; Wu, D.; Shah, S. S. A. Materials Science and Engineering: A, Vol. 649 https://doi.org/10.1016/j.msea.2015.09.100	journal	January 2016
On the mechanism of serrated yielding and dynamic strain ageing Van Den Beukel, A. Acta Metallurgica, Vol. 28, Issue 7 https://doi.org/10.1016/0001-6160(80)90114-5	journal	July 1980
Extinction Risk and the 1/f Family of Noise Models Halley, John M.; Kunin, William E. Theoretical Population Biology, Vol. 56, Issue 3 https://doi.org/10.1006/tpbi.1999.1424	journal	December 1999
Dynamic Strain Aging in a Newly Developed Ni–Co-Base Superalloy with Low Stacking Fault Energy Tian, Chenggang; Cui, Chuanyong; Xu, Ling Journal of Materials Science & Technology, Vol. 29, Issue 9 https://doi.org/10.1016/j.jmst.2013.04.012	journal	September 2013
Repeated yielding in tin bronze alloys Russell, B. The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, Vol. 8, Issue 88 https://doi.org/10.1080/14786436308211160	journal	April 1963
Temperature rise at shear bands in metallic glasses Lewandowski, J. J.; Greer, A. L. Nature Materials, Vol. 5, Issue 1 https://doi.org/10.1038/nmat1536	journal	December 2005
Serrated flow behavior in AL6XN austenitic stainless steel Meng, L. J.; Sun, J.; Xing, H. Journal of Nuclear Materials, Vol. 394, Issue 1 https://doi.org/10.1016/j.jnucmat.2009.08.002	journal	October 2009
Serrated flow in aluminium alloys containing lithium Kumar, S.; Pink, E. Acta Materialia, Vol. 45, Issue 12 https://doi.org/10.1016/S1359-6454(97)00149-3	journal	December 1997
Effect of Strain Rate on Deformation Behavior of Semi-Solid Dendritic Alloys Suery, M.; Flemings, M. C. Metallurgical Transactions A, Vol. 13, Issue 10 https://doi.org/10.1007/BF02647837	journal	October 1982
Characterisation of PLC band parameters using laser speckle technique Shabadi, Rajashekhar; Kumar, Subodh; Roven, Hans J. Materials Science and Engineering: A, Vol. 364, Issue 1-2 https://doi.org/10.1016/j.msea.2003.08.013	journal	January 2004
Alloy Design and Properties Optimization of High-Entropy Alloys Zhang, Y.; Yang, X.; Liaw, P. K. JOM, Vol. 64, Issue 7 https://doi.org/10.1007/s11837-012-0366-5	journal	July 2012
The Portevin–Le Chatelier effect in β-phase Mg–14.3Li–0.8Zn alloy Wu, S. K.; Chien, C.; Yang, C. S. Materials Science and Engineering: A, Vol. 605 https://doi.org/10.1016/j.msea.2014.03.026	journal	May 2014
Effects of initial grain size on hot deformation behavior of commercial pure aluminum Rezaei Ashtiani, H. R.; Parsa, M. H.; Bisadi, H. Materials & Design, Vol. 42 https://doi.org/10.1016/j.matdes.2012.06.021	journal	December 2012
Dynamics of a ferromagnetic domain wall: Avalanches, depinning transition, and the Barkhausen effect Zapperi, Stefano; Cizeau, Pierre; Durin, Gianfranco Physical Review B, Vol. 58, Issue 10 https://doi.org/10.1103/PhysRevB.58.6353	journal	September 1998
The influence of aging on the serrated yielding phenomena in a nickel-base superalloy Nalawade, S. A.; Sundararaman, M.; Kishore, R. Scripta Materialia, Vol. 59, Issue 9 https://doi.org/10.1016/j.scriptamat.2008.07.004	journal	November 2008
Strain rate dependence of twinning avalanches at high speed impact Zhang, L.; Salje, E. K. H.; Ding, X. Applied Physics Letters, Vol. 104, Issue 16 https://doi.org/10.1063/1.4873520	journal	April 2014
On the critical conditions of the Portevin-Le Châtelier effect Hähner, P. Acta Materialia, Vol. 45, Issue 9 https://doi.org/10.1016/S1359-6454(97)00066-9	journal	September 1997
Effect of cold rolling on the microstructure and mechanical properties of Al0.25CoCrFe1.25Ni1.25 high-entropy alloy Wang, Z.; Gao, M. C.; Ma, S. G. Materials Science and Engineering: A, Vol. 645 https://doi.org/10.1016/j.msea.2015.07.088	journal	October 2015
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect Greer, Julia R.; De Hosson, Jeff Th. M. Progress in Materials Science, Vol. 56, Issue 6 https://doi.org/10.1016/j.pmatsci.2011.01.005	journal	August 2011
Prediction of epileptic seizures: are nonlinear methods relevant? McSharry, Patrick E.; Smith, Leonard A.; Tarassenko, Lionel Nature Medicine, Vol. 9, Issue 3 https://doi.org/10.1038/nm0303-241	journal	March 2003
A predictive mechanism for dynamic strain ageing in aluminium–magnesium alloys Curtin, William A.; Olmsted, David L.; Hector, Louis G. Nature Materials, Vol. 5, Issue 11 https://doi.org/10.1038/nmat1765	journal	October 2006
Strain localization phenomena associated with static and dynamic strain ageing in notched specimens: experiments and finite element simulations Graff, S.; Forest, S.; Strudel, J. -L. Materials Science and Engineering: A, Vol. 387-389 https://doi.org/10.1016/j.msea.2004.02.083	journal	December 2004
Low-temperature plasticity anomaly in the bulk metallic glass Zr64.13Cu15.75Ni10.12Al10 Tabachnikova, E. D.; Podol’skiĭ, A. V.; Bengus, V. Z. Low Temperature Physics, Vol. 34, Issue 8 https://doi.org/10.1063/1.2967517	journal	August 2008
Tensile behavior of hydrogen-charged 316L stainless steel at elevated temperatures Choi, Myounggeun; Hou, Jixin; Máthis, Kristián Materials Science and Engineering: A, Vol. 595 https://doi.org/10.1016/j.msea.2013.12.011	journal	February 2014
Continual mechanical twinning Bolling, G. F.; Richman, R. H. Acta Metallurgica, Vol. 13, Issue 7 https://doi.org/10.1016/0001-6160(65)90136-7	journal	July 1965
A practical method for calculating largest Lyapunov exponents from small data sets Rosenstein, Michael T.; Collins, James J.; De Luca, Carlo J. Physica D: Nonlinear Phenomena, Vol. 65, Issue 1-2 https://doi.org/10.1016/0167-2789(93)90009-P	journal	May 1993
Flow and fracture characteristics of aluminium alloy AA5083–H116 as function of strain rate, temperature and triaxiality Clausen, Arild H.; Børvik, Tore; Hopperstad, Odd S. Materials Science and Engineering: A, Vol. 364, Issue 1-2 https://doi.org/10.1016/j.msea.2003.08.027	journal	January 2004
Dynamic recovery and recrystallization during high-temperature tensile deformation of a free-standing Pt-aluminide bond coat Alam, Md. Zafir; Kamat, S. V.; Jayaram, V. Materials Science and Engineering: A, Vol. 604 https://doi.org/10.1016/j.msea.2014.03.007	journal	May 2014
Accelerated exploration of multi-principal element alloys with solid solution phases Senkov, O. N.; Miller, J. D.; Miracle, D. B. Nature Communications, Vol. 6, Issue 1 https://doi.org/10.1038/ncomms7529	journal	March 2015
Plastic deformation in metallic glasses Argon, A. S. Acta Metallurgica, Vol. 27, Issue 1 https://doi.org/10.1016/0001-6160(79)90055-5	journal	January 1979
Malleable hypoeutectic Zr–Ni–Cu–Al bulk glassy alloys with tensile plastic elongation at room temperature Yokoyama, Y.; Fujita, K.; Yavari, A. R. Philosophical Magazine Letters, Vol. 89, Issue 5 https://doi.org/10.1080/09500830902873575	journal	May 2009
Three types of Portevin–Le Chatelier effects: Experiment and modelling Jiang, Huifeng; Zhang, Qingchuan; Chen, Xuedong Acta Materialia, Vol. 55, Issue 7 https://doi.org/10.1016/j.actamat.2006.10.029	journal	April 2007
Transition of Temporal Scaling Behavior in Percolation Assisted Shear-branching Structure during Plastic Deformation Ren, Jingli; Chen, Cun; Wang, Gang Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/srep45083	journal	March 2017
Serration behavior and shear band characteristics during tensile deformation of an ultrafine-grained 5024 Al alloy Komarasamy, M.; Mishra, R. S. Materials Science and Engineering: A, Vol. 616 https://doi.org/10.1016/j.msea.2014.08.027	journal	October 2014
Stress-drop rates in serrated flow and their strain and temperature dependences: a comparison of an aluminum–magnesium alloy and a mild steel Pink, E.; Arsenault, R. J. Materials Science and Engineering: A, Vol. 272, Issue 1 https://doi.org/10.1016/S0921-5093(99)00458-X	journal	November 1999
Distributions of avalanches in martensitic transformations Vives, Eduard; Ortín, Jordi; Mañosa, Lluís Physical Review Letters, Vol. 72, Issue 11 https://doi.org/10.1103/PhysRevLett.72.1694	journal	March 1994
Universality of rain event size distributions Peters, Ole; Deluca, A.; Corral, A. Journal of Statistical Mechanics: Theory and Experiment, Vol. 2010, Issue 11 https://doi.org/10.1088/1742-5468/2010/11/P11030	journal	November 2010
Soft spots and their structural signature in a metallic glass Ding, Jun; Patinet, Sylvain; Falk, Michael L. Proceedings of the National Academy of Sciences, Vol. 111, Issue 39 https://doi.org/10.1073/pnas.1412095111	journal	September 2014
On some aspects of compressive properties and serrated flow in Mg-Y-Nd-Zr alloy Azzeddine, H.; Bradai, D. Journal of Rare Earths, Vol. 31, Issue 8 https://doi.org/10.1016/S1002-0721(12)60362-7	journal	August 2013
Complexity in dislocation dynamics: model Miguel, M. -Carmen; Vespignani, Alessandro; Zapperi, Stefano Materials Science and Engineering: A, Vol. 309-310 https://doi.org/10.1016/S0921-5093(00)01681-6	journal	July 2001
Tensile deformation micromechanisms for bulk metallic glass matrix composites: From work-hardening to softening Qiao, J. W.; Sun, A. C.; Huang, E. W. Acta Materialia, Vol. 59, Issue 10 https://doi.org/10.1016/j.actamat.2011.03.036	journal	June 2011
Mechanical tensile test of the full-size ITER TF conductor jacket materials at 4.2K Wu, Zhixiong; Li, Laifeng; Huang, Chuanjun Fusion Engineering and Design, Vol. 88, Issue 11 https://doi.org/10.1016/j.fusengdes.2013.04.039	journal	November 2013
Effects of Temperature on Serrated Flows of Al0.5CoCrCuFeNi High-Entropy Alloy Chen, Shuying; Xie, Xie; Chen, Bilin JOM, Vol. 67, Issue 10 https://doi.org/10.1007/s11837-015-1580-8	journal	August 2015
New observations on the mechanisms of dynamic strain aging and of jerky flow Mulford, R. A.; Kocks, U. F. Acta Metallurgica, Vol. 27, Issue 7 https://doi.org/10.1016/0001-6160(79)90130-5	journal	July 1979

Similar Records

Temperature effects on the serrated behavior of an Al_0.5CoCrCuFeNi high-entropy alloy

Journal Article · 2017 · Materials Chemistry and Physics · OSTI ID:1471593

Chen, Shuying; Xie, Xie; Li, Weidong; +7 more

Tailoring magnetic behavior of CoFeMnNiX (X = Al, Cr, Ga, and Sn) high entropy alloys by metal doping

Journal Article · 2017 · Acta Materialia · OSTI ID:1393391

Zuo, Tingting; Gao, Michael C.; Ouyang, Lizhi; +7 more

Influence of Bridgman solidification on microstructures and magnetic behaviors of a non-equiatomic FeCoNiAlSi high-entropy alloy

Journal Article · 2015 · Intermetallics · OSTI ID:1224524

Zuo, Tingting; Yang, Xiao; Liaw, Peter K.; +1 more

Title: Serration and noise behaviors in materials

Citation Formats

References (370)

Similar Records

Related Subjects