DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Heat and fluid flow in additive manufacturing – Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys

Authors:
; ; ;
Publication Date:
Sponsoring Org.:
USDOE
OSTI Identifier:
1548420
Grant/Contract Number:  
179466; NE0008280
Resource Type:
Publisher's Accepted Manuscript
Journal Name:
Computational Materials Science
Additional Journal Information:
Journal Name: Computational Materials Science Journal Volume: 150 Journal Issue: C; Journal ID: ISSN 0927-0256
Publisher:
Elsevier
Country of Publication:
Netherlands
Language:
English

Citation Formats

Mukherjee, T., Wei, H. L., De, A., and DebRoy, T. Heat and fluid flow in additive manufacturing – Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys. Netherlands: N. p., 2018. Web. doi:10.1016/j.commatsci.2018.04.027.
Mukherjee, T., Wei, H. L., De, A., & DebRoy, T. Heat and fluid flow in additive manufacturing – Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys. Netherlands. https://doi.org/10.1016/j.commatsci.2018.04.027
Mukherjee, T., Wei, H. L., De, A., and DebRoy, T. Sun . "Heat and fluid flow in additive manufacturing – Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys". Netherlands. https://doi.org/10.1016/j.commatsci.2018.04.027.
@article{osti_1548420,
title = {Heat and fluid flow in additive manufacturing – Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys},
author = {Mukherjee, T. and Wei, H. L. and De, A. and DebRoy, T.},
abstractNote = {},
doi = {10.1016/j.commatsci.2018.04.027},
journal = {Computational Materials Science},
number = C,
volume = 150,
place = {Netherlands},
year = {2018},
month = {7}
}

Journal Article:
Free Publicly Available Full Text

Citation Metrics:
Cited by: 35 works
Citation information provided by
Web of Science

Save / Share:

Works referenced in this record:

Finite element simulation of laser additive melting and solidification of Inconel 718 with experimentally tested thermal properties
journal, November 2017

  • Andreotta, Richard; Ladani, Leila; Brindley, William
  • Finite Elements in Analysis and Design, Vol. 135
  • DOI: 10.1016/j.finel.2017.07.002

Determination of geometrical factors in Layerwise Laser Melting using optical process monitoring
journal, December 2011


Damage evolution and failure mechanisms in additively manufactured stainless steel
journal, January 2016

  • Carlton, Holly D.; Haboub, Abdel; Gallegos, Gilbert F.
  • Materials Science and Engineering: A, Vol. 651
  • DOI: 10.1016/j.msea.2015.10.073

Dimensionless numbers in additive manufacturing
journal, February 2017

  • Mukherjee, T.; Manvatkar, V.; De, A.
  • Journal of Applied Physics, Vol. 121, Issue 6
  • DOI: 10.1063/1.4976006

Numerical Modeling of Heat Distribution in the Electron Beam Melting® of Ti-6Al-4V
journal, November 2013

  • Jamshidinia, Mahdi; Kong, Fanrong; Kovacevic, Radovan
  • Journal of Manufacturing Science and Engineering, Vol. 135, Issue 6
  • DOI: 10.1115/1.4025746

Additive manufacturing of metallic components – Process, structure and properties
journal, March 2018


Influence of hatch spacing on heat and mass transfer, thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy
journal, October 2016


Physical processes in fusion welding
journal, January 1995


Fundamental consolidation mechanisms during selective beam melting of powders
journal, November 2013

  • Körner, Carolin; Bauereiß, Andreas; Attar, Elham
  • Modelling and Simulation in Materials Science and Engineering, Vol. 21, Issue 8
  • DOI: 10.1088/0965-0393/21/8/085011

Mesoscopic simulation of selective beam melting processes
journal, June 2011


Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process
journal, November 2014


Characterization of stainless steel parts by Laser Metal Deposition Shaping
journal, March 2014


Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment
journal, January 2014


An improved prediction of residual stresses and distortion in additive manufacturing
journal, January 2017


A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition
journal, February 2017


Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
journal, April 2016


Rapid Solidification: Selective Laser Melting of AlSi10Mg
journal, January 2016


Comparison of 3DSIM thermal modelling of selective laser melting using new dynamic meshing method to ANSYS
journal, November 2014


Finite Element Simulation of Selective Laser Melting process considering Optical Penetration Depth of laser in powder bed
journal, January 2016


Defect generation and propagation mechanism during additive manufacturing by selective beam melting
journal, November 2014


Building blocks for a digital twin of additive manufacturing
journal, August 2017


Residual stresses and distortion in additively manufactured compositionally graded and dissimilar joints
journal, February 2018


A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing
journal, October 2009


On Process Temperature in Powder-Bed Electron Beam Additive Manufacturing: Model Development and Validation
journal, October 2014

  • Cheng, Bo; Price, Steven; Lydon, James
  • Journal of Manufacturing Science and Engineering, Vol. 136, Issue 6
  • DOI: 10.1115/1.4028484

Mechanical and physical properties of AlSi10Mg processed through selective laser melting
conference, January 2017

  • Raus, A. A.; Wahab, M. S.; Ibrahim, M.
  • 7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING: Proceedings of the 7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy, AIP Conference Proceedings
  • DOI: 10.1063/1.4981168

Heat transfer and material flow during laser assisted multi-layer additive manufacturing
journal, September 2014

  • Manvatkar, V.; De, A.; DebRoy, T.
  • Journal of Applied Physics, Vol. 116, Issue 12
  • DOI: 10.1063/1.4896751

Mitigation of thermal distortion during additive manufacturing
journal, January 2017


Heat transfer and phase transition in the selective laser melting process
journal, May 2017


Tailoring surface quality through mass and momentum transfer modeling using a volume of fluid method in selective laser melting of TiC/AlSi10Mg powder
journal, January 2015


The influence of heat accumulation on the surface roughness in powder-bed additive manufacturing
journal, February 2015


Printability of alloys for additive manufacturing
journal, January 2016

  • Mukherjee, T.; Zuback, J. S.; De, A.
  • Scientific Reports, Vol. 6, Issue 1
  • DOI: 10.1038/srep19717