Reliability and heat transfer performance of a miniature high-temperature thermosyphon-based thermal valve

Oshman, Christopher; Rea, Jonathan; Hardin, Corey; Olsen, Michele L.; Alleman, Jeff; Glatzmaier, Greg; Siegel, Nathan; Parilla, Philip; Ginley, David; Toberer, Eric S.

doi:10.1016/j.ijheatmasstransfer.2018.04.159

Title: Reliability and heat transfer performance of a miniature high-temperature thermosyphon-based thermal valve

Authors:

; Hardin, Corey; Olsen, Michele L.; Alleman, Jeff; Glatzmaier, Greg; Siegel, Nathan; Parilla, Philip; Ginley, David; Toberer, Eric S.

Publication Date:: 2018-10-01

Sponsoring Org.:: USDOE Advanced Research Projects Agency - Energy (ARPA-E)

OSTI Identifier:: 1548191

Grant/Contract Number:: AR0670-4918

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: International Journal of Heat and Mass Transfer

Additional Journal Information:: Journal Name: International Journal of Heat and Mass Transfer Journal Volume: 125 Journal Issue: C; Journal ID: ISSN 0017-9310

Publisher:: Elsevier

Country of Publication:: United Kingdom

Language:: English

Citation Formats


                    Oshman, Christopher, Rea, Jonathan, Hardin, Corey, Olsen, Michele L., Alleman, Jeff, Glatzmaier, Greg, Siegel, Nathan, Parilla, Philip, Ginley, David, and Toberer, Eric S. Reliability and heat transfer performance of a miniature high-temperature thermosyphon-based thermal valve.  United Kingdom: N. p., 2018. 
Web.  https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.159.

Copy to clipboard


                    Oshman, Christopher, Rea, Jonathan, Hardin, Corey, Olsen, Michele L., Alleman, Jeff, Glatzmaier, Greg, Siegel, Nathan, Parilla, Philip, Ginley, David, & Toberer, Eric S. Reliability and heat transfer performance of a miniature high-temperature thermosyphon-based thermal valve.  United Kingdom.  https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.159

Copy to clipboard


                    Oshman, Christopher, Rea, Jonathan, Hardin, Corey, Olsen, Michele L., Alleman, Jeff, Glatzmaier, Greg, Siegel, Nathan, Parilla, Philip, Ginley, David, and Toberer, Eric S. Mon .  
"Reliability and heat transfer performance of a miniature high-temperature thermosyphon-based thermal valve".  United Kingdom.  https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.159.

Copy to clipboard


                    
@article{osti_1548191,

  title        = {Reliability and heat transfer performance of a miniature high-temperature thermosyphon-based thermal valve},

  author       = {Oshman, Christopher and Rea, Jonathan and Hardin, Corey and Olsen, Michele L. and Alleman, Jeff and Glatzmaier, Greg and Siegel, Nathan and Parilla, Philip and Ginley, David and Toberer, Eric S.},

  abstractNote = {},

  doi          = {10.1016/j.ijheatmasstransfer.2018.04.159},

  journal      = {International Journal of Heat and Mass Transfer},

  number       = C,

  volume       = 125,

  place        = {United Kingdom},

  year         = {2018},

  month        = {10}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.159

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 3 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Experimental demonstration, modeling and analysis of a novel latent-heat thermal energy storage unit with a helical fin
journal, July 2017

Rozenfeld, A.; Kozak, Y.; Rozenfeld, T.
International Journal of Heat and Mass Transfer, Vol. 110
DOI: 10.1016/j.ijheatmasstransfer.2017.03.020

A state-of-the-art review on hybrid heat pipe latent heat storage systems
journal, November 2015

Naghavi, M. S.; Ong, K. S.; Mehrali, M.
Energy Conversion and Management, Vol. 105
DOI: 10.1016/j.enconman.2015.08.044

Second Generation Sodium Heat Pipe Receiver for a USAB V-160 Stirling Engine: Evaluation of On-Sun Test Results Using the Proposed IEA Guidelines and Analysis of Heat Pipe Damage
journal, November 1997

Laing, D.; Tra¨bing, C.
Journal of Solar Energy Engineering, Vol. 119, Issue 4
DOI: 10.1115/1.2888033

High temperature latent heat thermal energy storage using heat pipes
journal, July 2010

Shabgard, H.; Bergman, T. L.; Sharifi, N.
International Journal of Heat and Mass Transfer, Vol. 53, Issue 15-16
DOI: 10.1016/j.ijheatmasstransfer.2010.03.035

Classification and assessment of energy storage systems
journal, August 2017

Guney, Mukrimin Sevket; Tepe, Yalcin
Renewable and Sustainable Energy Reviews, Vol. 75
DOI: 10.1016/j.rser.2016.11.102

Enhancement of latent heat energy storage using embedded heat pipes
journal, July 2011

Robak, Christopher W.; Bergman, Theodore L.; Faghri, Amir
International Journal of Heat and Mass Transfer, Vol. 54, Issue 15-16
DOI: 10.1016/j.ijheatmasstransfer.2011.03.038

An Experimental Study on a Sodium Loop-type Heat Pipe for Thermal Transport from a High-temperature Solar Receiver
journal, May 2015

Boo, J. H.; Kim, S. M.; Kang, Y. H.
Energy Procedia, Vol. 69
DOI: 10.1016/j.egypro.2015.03.070

Techno-economic analysis of a small scale solar power tower at varied locations
conference, January 2018

Rea, Jonathan E.; Glatzmaier, Greg C.; Oshman, Christopher
SolarPACES 2017: International Conference on Concentrating Solar Power and Chemical Energy Systems, AIP Conference Proceedings
DOI: 10.1063/1.5067070

Experimental study on the melting and solidification of a phase change material enhanced by heat pipe
journal, April 2016

Motahar, Sadegh; Khodabandeh, Rahmatollah
International Communications in Heat and Mass Transfer, Vol. 73
DOI: 10.1016/j.icheatmasstransfer.2016.02.012

Phase Change Salt Thermal Energy Storage for Dish Stirling Solar Power Systems
conference, December 2013

White, Maurice; Qiu, Songgang; Galbraith, Ross
ASME 2013 7th International Conference on Energy Sustainability collocated with the ASME 2013 Heat Transfer Summer Conference and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology
DOI: 10.1115/ES2013-18292

Demonstration of a thermosyphon thermal valve for controlled extraction of stored solar thermal energy
conference, January 2018

Oshman, Christopher; Rea, Jon; Hardin, Corey
SolarPACES 2017: International Conference on Concentrating Solar Power and Chemical Energy Systems, AIP Conference Proceedings
DOI: 10.1063/1.5067115

Irreversible climate change due to carbon dioxide emissions
journal, January 2009

Solomon, Susan; Plattner, Gian-Kasper; Knutti, Reto
Proceedings of the National Academy of Sciences, Vol. 106, Issue 6
DOI: 10.1073/pnas.0812721106

Thermal Energy Storage for a Dish Stirling Concentrated Solar Power System
conference, July 2013

Thayer, John; Galbraith, Ross; Rosenfeld, John
11th International Energy Conversion Engineering Conference
DOI: 10.2514/6.2013-3869

Thermal energy storage systems for concentrated solar power plants
journal, November 2017

Pelay, Ugo; Luo, Lingai; Fan, Yilin
Renewable and Sustainable Energy Reviews, Vol. 79
DOI: 10.1016/j.rser.2017.03.139

Experimental study on thermal performance of high-temperature molten salt cascaded latent heat thermal energy storage system
journal, March 2018

Yuan, Fan; Li, Ming-Jia; Ma, Zhao
International Journal of Heat and Mass Transfer, Vol. 118
DOI: 10.1016/j.ijheatmasstransfer.2017.11.024

Design of a thermosyphon-based thermal valve for controlled high-temperature heat extraction
journal, November 2017

Oshman, Christopher; Hardin, Corey; Rea, Jonathan
Applied Thermal Engineering, Vol. 126
DOI: 10.1016/j.applthermaleng.2017.01.038

Similar Records in DOE PAGES and OSTI.GOV collections:

Reliability and heat transfer performance of a miniature high-temperature thermosyphon-based thermal valve

Journal Article Oshman, Christopher ; Rea, Jonathan ; Hardin, Corey ; ... - International Journal of Heat and Mass Transfer

Latent heat thermal energy storage systems have the advantages of near isothermal heat release and high energy density compared to sensible heat, generally resulting in higher power block efficiencies. Until now, there has been no highly effective and reliable method to passively extract that stored latent energy. Most modern attempts rely on external power supplied to a pump to move viscous heat transfer fluids from the phase change material (PCM) to the power block. In this work, the problem of latent heat dispatchability has been addressed with a redesigned thermosyphon geometry that can act as a 'thermal valve' capable ofmore »« less
https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.159
Design of a thermosyphon-based thermal valve for controlled high-temperature heat extraction

Journal Article Oshman, Christopher ; Hardin, Corey ; Rea, Jonathan ; ... - Applied Thermal Engineering

Conventional concentrated solar power (CSP) is a reliable alternative energy source that uses the sun’s heat to drive a heat engine to produce electrical power. An advantage of CSP is its ability to store thermal energy for use during off-sun hours which is typically done by storing sensible heat in molten salts. Alternatively, thermal energy may be stored as latent heat in a phase-change material (PCM), which stores large quantities of thermal energy in an isothermal process. On-sun, the PCM melts, storing energy. Off-sun, the latent heat is extracted to produce dispatchable electrical power. Here, this paper presents the designmore »« less
Cited by 3
https://doi.org/10.1016/j.applthermaleng.2017.01.038

Full Text Available
The Effect of Nanofluids on the Heat-Transfer Capacity of Miniature Thermosyphons for Electronics Cooling

Journal Article Bondarenko, B. I. ; Moraru, V. N., E-mail: vasily.moraru@gmail.com ; Kravets, V. Yu. ; ... - Technical Physics Letters

Stable nanofluids based on DG-100 grade carbon black and carbon nanotubes have been prepared, and their influence on the maximum heat-transfer capacity and thermal resistance of closed-loop two-phase thermosyphons (TPTs) intended for electronics cooling have been studied. A more than twofold increase in the critical heat flux of these TPTs as compared to those filled with water has been obtained along with a sharp decrease in their thermal resistance. It is suggested that this effect is not only due to the high thermal conductivity of the proposed nanofluids, but is also related to the formation of a specific porous structuremore »« less
https://doi.org/10.1134/S1063785019030234
ASME proceedings of the 32nd national heat transfer conference (HTD-Vol. 349). Volume 11: Interfacial thermal phenomena in thin films; Heat pipes and thermosyphons; Heat and mass transfer in porous media

Conference Goodson, K ; Chang, W S ; Charmchi, M ; ...

This volume contains a portion of the over 240 ASME papers which were presented at the conference. For over 40 years, the National Heat Transfer Conference has been the premiere forum for the presentation and dissemination of the latest advances in heat transfer. The work contained in these volumes range from studies of fundamental phenomena to applications in the latest heat transfer equipment. This volume covers the following topics: Interfacial thermal phenomena in thin films; heat pipes and thermosyphons; and heat and mass transfer in porous media. Separate abstracts were prepared for most papers in this volume.
The Development of an INL Capability for High Temperature Flow, Heat Transfer, and Thermal Energy Storage with Applications in Advanced Small Modular Reactors, High Temperature Heat Exchangers, Hybrid Energy Systems, and Dynamic Grid Energy Storage C

Technical Report Sun, Xiaodong ; Zhang, Xiaoqin ; Kim, Inhun ; ...

The overall goal of this project is to support Idaho National Laboratory in developing a new advanced high temperature multi fluid multi loop test facility that is aimed at investigating fluid flow and heat transfer, material corrosion, heat exchanger characteristics and instrumentation performance, among others, for nuclear applications. Specifically, preliminary research has been performed at The Ohio State University in the following areas: 1. A review of fluoride molten salts’ characteristics in thermal, corrosive, and compatibility performances. A recommendation for a salt selection is provided. Material candidates for both molten salt and helium flow loop have been identified. 2. Amore »« less
https://doi.org/10.2172/1237324

Full Text Available

Similar Records

Title: Reliability and heat transfer performance of a miniature high-temperature thermosyphon-based thermal valve

Citation Formats

Experimental demonstration, modeling and analysis of a novel latent-heat thermal energy storage unit with a helical fin journal, July 2017

A state-of-the-art review on hybrid heat pipe latent heat storage systems journal, November 2015

Second Generation Sodium Heat Pipe Receiver for a USAB V-160 Stirling Engine: Evaluation of On-Sun Test Results Using the Proposed IEA Guidelines and Analysis of Heat Pipe Damage journal, November 1997

High temperature latent heat thermal energy storage using heat pipes journal, July 2010

Classification and assessment of energy storage systems journal, August 2017

Enhancement of latent heat energy storage using embedded heat pipes journal, July 2011

An Experimental Study on a Sodium Loop-type Heat Pipe for Thermal Transport from a High-temperature Solar Receiver journal, May 2015

Techno-economic analysis of a small scale solar power tower at varied locations conference, January 2018

Experimental study on the melting and solidification of a phase change material enhanced by heat pipe journal, April 2016

Phase Change Salt Thermal Energy Storage for Dish Stirling Solar Power Systems conference, December 2013

Demonstration of a thermosyphon thermal valve for controlled extraction of stored solar thermal energy conference, January 2018

Irreversible climate change due to carbon dioxide emissions journal, January 2009

Thermal Energy Storage for a Dish Stirling Concentrated Solar Power System conference, July 2013

Thermal energy storage systems for concentrated solar power plants journal, November 2017

Experimental study on thermal performance of high-temperature molten salt cascaded latent heat thermal energy storage system journal, March 2018

Design of a thermosyphon-based thermal valve for controlled high-temperature heat extraction journal, November 2017

Experimental demonstration, modeling and analysis of a novel latent-heat thermal energy storage unit with a helical fin
journal, July 2017

A state-of-the-art review on hybrid heat pipe latent heat storage systems
journal, November 2015

Second Generation Sodium Heat Pipe Receiver for a USAB V-160 Stirling Engine: Evaluation of On-Sun Test Results Using the Proposed IEA Guidelines and Analysis of Heat Pipe Damage
journal, November 1997

High temperature latent heat thermal energy storage using heat pipes
journal, July 2010

Classification and assessment of energy storage systems
journal, August 2017

Enhancement of latent heat energy storage using embedded heat pipes
journal, July 2011

An Experimental Study on a Sodium Loop-type Heat Pipe for Thermal Transport from a High-temperature Solar Receiver
journal, May 2015

Techno-economic analysis of a small scale solar power tower at varied locations
conference, January 2018

Experimental study on the melting and solidification of a phase change material enhanced by heat pipe
journal, April 2016

Phase Change Salt Thermal Energy Storage for Dish Stirling Solar Power Systems
conference, December 2013

Demonstration of a thermosyphon thermal valve for controlled extraction of stored solar thermal energy
conference, January 2018

Irreversible climate change due to carbon dioxide emissions
journal, January 2009

Thermal Energy Storage for a Dish Stirling Concentrated Solar Power System
conference, July 2013

Thermal energy storage systems for concentrated solar power plants
journal, November 2017

Experimental study on thermal performance of high-temperature molten salt cascaded latent heat thermal energy storage system
journal, March 2018

Design of a thermosyphon-based thermal valve for controlled high-temperature heat extraction
journal, November 2017