DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: CMAS behavior of yttrium aluminum garnet (YAG) and yttria-stabilized zirconia (YSZ) thermal barrier coatings

Journal Article · · Surface and Coatings Technology

Calcium magnesium aluminosilicate (CMAS) that is formed from the ingested deposits in gas turbines degrades thermal barrier coatings (TBCs), especially for the most widely used material; yttria-stabilized zirconia (YSZ). In the present work, we examine the behavior of yttrium aluminum garnet (YAG) as an alternative material for TBCs. CMAS interaction studies were conducted by making composite pellets of YAG-CMAS and YSZ-CMAS powders. These pellets, after being subjected to heat treatment between 1100 °C and 1500 °C were characterized by X-ray Diffraction (XRD), scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDS), which showed YAG to be almost inert to CMAS whereas YSZ exhibited significant phase changes. To test the behavior of TBCs with YAG and 8YSZ as the topcoat material in a CMAS environment, cyclic furnace tests were conducted in which a controlled amount of CMAS was applied and then the samples were cycled to failure. In addition, to simulate the continuous accumulation of CMAS expected in service, a cyclic furnace test was devised in which a small dose of aqueous solution of CMAS was applied on TBC specimens at the start of every cycle until the samples were cycled to failure. In all these tests YAG TBCs outperformed YSZ in terms of durability. In conclusion, the mechanisms of CMAS attack are described and the relative resistance of YAG and YSZ is shown to be consistent with the Optical Basicity (OB) theory.

Research Organization:
HiFunda LLC, Salt Lake City, UT (United States)
Sponsoring Organization:
USDOE Office of Science (SC)
Grant/Contract Number:
SC0007544
OSTI ID:
1538860
Alternate ID(s):
OSTI ID: 1549815
Journal Information:
Surface and Coatings Technology, Journal Name: Surface and Coatings Technology Journal Issue: C Vol. 327; ISSN 0257-8972
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English

References (29)

A novel test approach for plasma-sprayed coatings tested simultaneously under CMAS and thermal gradient cycling conditions journal December 2010
Double-Layer Gadolinium Zirconate/Yttria-Stabilized Zirconia Thermal Barrier Coatings Deposited by the Solution Precursor Plasma Spray Process journal July 2015
Failure of Thermal Barrier Coatings Subjected to CMAS Attack journal July 2009
Role of environment deposits and operating surface temperature in spallation of air plasma sprayed thermal barrier coatings journal December 1996
Recent Developments in the Field of Thermal Barrier Coatings journal March 2009
2ZrO 2 ·Y 2 O 3 Thermal Barrier Coatings Resistant to Degradation by Molten CMAS: Part II, Interactions with Sand and Fly Ash journal September 2014
CMAS corrosion of EB PVD TBCs: Identifying the minimum level to initiate damage journal January 2010
Thermal barrier coating materials journal June 2005
Phase diagram of the ZrO2–Gd2O3–Al2O3 system journal January 2006
Mechanisms of cracking and delamination within thick thermal barrier systems in aero-engines subject to calcium-magnesium-alumino-silicate (CMAS) penetration journal August 2008
Overview on advanced thermal barrier coatings journal November 2010
Composition effects of thermal barrier coating ceramics on their interaction with molten Ca–Mg–Al–silicate (CMAS) glass journal September 2012
Optical Basicity: A Practical Acid-Base Theory for Oxides and Oxyanions journal December 1996
Gadolinium Zirconate/YSZ Thermal Barrier Coatings: Plasma Spraying, Microstructure, and Thermal Cycling Behavior journal September 2014
Thermal barrier coatings for aircraft engines: history and directions journal March 1997
Thermochemical compatibility between alumina and ZrO2–GdO3/2 thermal barrier coatings journal June 2005
A delamination mechanism for thermal barrier coatings subject to calcium–magnesium–alumino-silicate (CMAS) infiltration journal February 2005
Plasma-Sprayed Thermal Barrier Coatings: New Materials, Processing Issues, and Solutions journal February 2013
Infiltration-Inhibiting Reaction of Gadolinium Zirconate Thermal Barrier Coatings with CMAS Melts journal February 2008
High temperature viscosity of calcium-magnesium-aluminosilicate glass from synthetic sand journal November 2016
Thermochemical Interaction of Thermal Barrier Coatings with Molten CaO?MgO?Al 2 O 3 ?SiO 2 (CMAS) Deposits journal October 2006
Fracture Toughness of Plasma-Sprayed Thermal Barrier Ceramics: Influence of Processing, Microstructure, and Thermal Aging journal June 2014
Tailoring the EB-PVD columnar microstructure to mitigate the infiltration of CMAS in 7YSZ thermal barrier coatings journal January 2017
Low Thermal Conductivity in Garnets journal April 1997
Mechanisms controlling the durability of thermal barrier coatings journal January 2001
2ZrO 2 ·Y 2 O 3 Thermal Barrier Coatings Resistant to Degradation by Molten CMAS: Part I, Optical Basicity Considerations and Processing journal September 2014
Novel thermal barrier coatings that are resistant to high-temperature attack by glassy deposits journal December 2007
Thermal Barrier Coatings for Gas-Turbine Engine Applications journal April 2002
Thermal Conductivity, Phase Stability, and Oxidation Resistance of Y 3 Al 5 O 12 (YAG)/Y 2 O 3 –ZrO 2 (YSZ) Thermal-Barrier Coatings journal April 2004