The trends and challenges of fiber reinforced additive manufacturing

Fidan, Ismail; Imeri, Astrit; Gupta, Ankit; Hasanov, Seymur; Nasirov, Aslan; Elliott, Amy; Alifui-Segbaya, Frank; Nanami, Norimichi

doi:10.1007/s00170-018-03269-7

Title: The trends and challenges of fiber reinforced additive manufacturing

Journal Article · 13 January 2019 · International Journal of Advanced Manufacturing Technology

DOI: https://doi.org/10.1007/s00170-018-03269-7 · OSTI ID:1523745

Fidan, Ismail ^[1]; Imeri, Astrit ^[1]; Gupta, Ankit ^[1]; Hasanov, Seymur ^[1]; Nasirov, Aslan ^[1]; Elliott, Amy ^[2]; Alifui-Segbaya, Frank ^[3]; Nanami, Norimichi ^[4]

Tennessee Technological Univ., Cookeville, TN (United States)
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Griffith Univ., Gold Coast (Australia)
Gifu Univ., Gifu (Japan)

In the last few years, utilizing fiber reinforced additive manufacturing (FRAM)-based components in several industries has become quite popular. Compared to conventional AM technologies, FRAM offered complementary solutions to their needs. In general, fibers have been traditionally used in many manufacturing processes for various reasons. However, using conventional methods, there are obstacles in obtaining the desired complex geometries and low setup costs. AM offers possible avoidance of these limitations. Shape complexity, infill density, and manufacturing lead times are no longer barriers. Bridging AM with fiber reinforced materials offers a vast opportunity for lightweight and strong parts. Depending on the affinity, fibers with different structures can be mixed with different matrix materials and, thus, create stronger parts with improved mechanical properties. Process parameters like raster angle, infill speed, layer thickness, and nozzle temperature also strongly impact physical properties of FRAM products and are considered carefully. FRAM-based components are used in many industries such as aerospace, motorsports, and biomedicine, where the weight, strength, and complexity of parts are critical. Hence, numerous industrial companies and research facilities are investigating the implementation and adaptation of FRAM to their requirements. Studies are generally conducted on new materials, new FRAM technologies, the effect of fiber orientations and fraction on the performance of parts, improving the printing parameters, and other subjects. Furthermore, this study reports the current trends and challenges that FRAM is bringing to AM ecosystem.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE Office of Energy Efficiency and Renewable Energy (EERE)

Grant/Contract Number:: AC05-00OR22725

OSTI ID:: 1523745

Journal Information:: International Journal of Advanced Manufacturing Technology, Journal Name: International Journal of Advanced Manufacturing Technology Journal Issue: 5-8 Vol. 102; ISSN 0268-3768

Publisher:: SpringerCopyright Statement

Country of Publication:: United States

Language:: English

References (89)

Bamboo fiber-reinforced polypropylene composites: A study of the mechanical properties Chen, Xiaoya; Guo, Qipeng; Mi, Yongli Journal of Applied Polymer Science, Vol. 69, Issue 10 https://doi.org/10.1002/(SICI)1097-4628(19980906)69:10<1891::AID-APP1>3.0.CO;2-9	journal	September 1998
Nanofiber-reinforced polymers prepared by fused deposition modeling: Nanofiber-Reinforced Polymers Shofner, M. L.; Lozano, K.; Rodríguez-Macías, F. J. Journal of Applied Polymer Science, Vol. 89, Issue 11 https://doi.org/10.1002/app.12496	journal	June 2003
Mechanical and Thermal Properties of Poly(L-lactide) Incorporating Various Inorganic Fillers with Particle and Whisker Shapes Urayama, Hiroshi; Ma, Chenghuan; Kimura, Yoshiharu Macromolecular Materials and Engineering, Vol. 288, Issue 7 https://doi.org/10.1002/mame.200350004	journal	July 2003
Reactively Modified Poly(lactic acid): Properties and Foam Processing Di, Yingwei; Iannace, Salvatore; Di Maio, Ernesto Macromolecular Materials and Engineering, Vol. 290, Issue 11 https://doi.org/10.1002/mame.200500115	journal	November 2005
Morphology and Properties of Poly(L-Lactide) (PLLA) Filled with Hollow Glass Beads Hu, Xiao; Xu, Hong-Sheng; Li, Zhong-Ming Macromolecular Materials and Engineering, Vol. 292, Issue 5 https://doi.org/10.1002/mame.200600504	journal	May 2007
3D Printing of Poly(3-hydroxybutyrate) Porous Structures Using Selective Laser Sintering Pereira, Tatiana F.; Oliveira, Marcelo F.; Maia, Izaque A. Macromolecular Symposia, Vol. 319, Issue 1 https://doi.org/10.1002/masy.201100237	journal	September 2012
Synthetic fibers and thermoplastic short-fiber-reinforced polymers: Properties and characterization Unterweger, Christoph; Brüggemann, Oliver; Fürst, Christian Polymer Composites, Vol. 35, Issue 2 https://doi.org/10.1002/pc.22654	journal	September 2013
Vinyl esters: Low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturing Heller, Christian; Schwentenwein, Martin; Russmueller, Guenter Journal of Polymer Science Part A: Polymer Chemistry, Vol. 47, Issue 24 https://doi.org/10.1002/pola.23734	journal	December 2009
Efficient topology optimization in MATLAB using 88 lines of code Andreassen, Erik; Clausen, Anders; Schevenels, Mattias Structural and Multidisciplinary Optimization, Vol. 43, Issue 1 https://doi.org/10.1007/s00158-010-0594-7	journal	November 2010
Bridging topology optimization and additive manufacturing Zegard, Tomás; Paulino, Glaucio H. Structural and Multidisciplinary Optimization, Vol. 53, Issue 1 https://doi.org/10.1007/s00158-015-1274-4	journal	August 2015
Fatigue analysis of the fiber reinforced additively manufactured objects Imeri, A.; Fidan, I.; Allen, M. The International Journal of Advanced Manufacturing Technology, Vol. 98, Issue 9-12 https://doi.org/10.1007/s00170-018-2398-7	journal	July 2018
Creep behavior analysis of additively manufactured fiber-reinforced components Mohammadizadeh, M.; Fidan, I.; Allen, M. The International Journal of Advanced Manufacturing Technology, Vol. 99, Issue 5-8 https://doi.org/10.1007/s00170-018-2539-z	journal	August 2018
Poly(d,l-lactic acid) nanoparticle preparation and colloidal characterization Trimaille, T.; Pichot, C.; Ela�ssari, A. Colloid & Polymer Science, Vol. 281, Issue 12 https://doi.org/10.1007/s00396-003-0894-1	journal	November 2003
Selective Laser Melting Additive Manufacturing of Ti-Based Nanocomposites: The Role of Nanopowder Gu, Dongdong; Wang, Hongqiao; Zhang, Guoquan Metallurgical and Materials Transactions A, Vol. 45, Issue 1 https://doi.org/10.1007/s11661-013-1968-4	journal	September 2013
The processing, properties, and structure of carbon fibers MInus, Marilyn; Kumar, Satish JOM, Vol. 57, Issue 2 https://doi.org/10.1007/s11837-005-0217-8	journal	February 2005
Properties and morphologies of poly(?-lactide): 1. Annealing condition effects on properties and morphologies of poly(?-lactide) Tsuji, H. Polymer, Vol. 36, Issue 14 https://doi.org/10.1016/0032-3861(95)93647-5	journal	January 1995
The Potential for the use of composite materials in marine structures Chalmers, D. W. Marine Structures, Vol. 7, Issue 2-5 https://doi.org/10.1016/0951-8339(94)90034-5	journal	January 1994
The Selective Laser Sintering of Polycarbonate Berzins, M.; Childs, T. H. C.; Ryder, G. R. CIRP Annals, Vol. 45, Issue 1 https://doi.org/10.1016/S0007-8506(07)63044-3	journal	January 1996
Controlled crystal nucleation in the melt-crystallization of poly(l-lactide) and poly(l-lactide)/poly(d-lactide) stereocomplex Urayama, Hiroshi; Kanamori, Takeshi; Fukushima, Kazuki Polymer, Vol. 44, Issue 19 https://doi.org/10.1016/S0032-3861(03)00583-4	journal	September 2003
Degradation of poly(l-lactic acid) by γ-irradiation Nugroho, Pramono; Mitomo, Hiroshi; Yoshii, Fumio Polymer Degradation and Stability, Vol. 72, Issue 2 https://doi.org/10.1016/S0141-3910(01)00030-1	journal	May 2001
Thermoelastic anisotropy of a natural fiber Cichocki Jr., F. Composites Science and Technology, Vol. 62, Issue 5 https://doi.org/10.1016/S0266-3538(02)00011-8	journal	April 2002
Short fiber reinforced composites for fused deposition modeling Zhong, Weihong; Li, Fan; Zhang, Zuoguang Materials Science and Engineering: A, Vol. 301, Issue 2 https://doi.org/10.1016/S0921-5093(00)01810-4	journal	March 2001
Interfacial characteristics of composites fabricated by laminated object manufacturing Klosterman, Donald; Chartoff, Richard; Graves, George Composites Part A: Applied Science and Manufacturing, Vol. 29, Issue 9-10 https://doi.org/10.1016/S1359-835X(98)00088-8	journal	January 1998
Composite Modeling and Analysis for Fabrication of FDM Prototypes with Locally Controlled Properties Li, L.; Sun, Q.; Bellehumeur, C. Journal of Manufacturing Processes, Vol. 4, Issue 2 https://doi.org/10.1016/S1526-6125(02)70139-4	journal	January 2002
Making sense of 3-D printing: Creating a map of additive manufacturing products and services Conner, Brett P.; Manogharan, Guha P.; Martof, Ashley N. Additive Manufacturing, Vol. 1-4 https://doi.org/10.1016/j.addma.2014.08.005	journal	October 2014
Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing Dickson, Andrew N.; Barry, James N.; McDonnell, Kevin A. Additive Manufacturing, Vol. 16 https://doi.org/10.1016/j.addma.2017.06.004	journal	August 2017
Continuous lattice fabrication of ultra-lightweight composite structures Eichenhofer, Martin; Wong, Joanna C. H.; Ermanni, Paolo Additive Manufacturing, Vol. 18 https://doi.org/10.1016/j.addma.2017.08.013	journal	December 2017
Interlayer fracture toughness of additively manufactured unreinforced and carbon-fiber-reinforced acrylonitrile butadiene styrene Young, Devin; Wetmore, Nelson; Czabaj, Michael Additive Manufacturing, Vol. 22 https://doi.org/10.1016/j.addma.2018.02.010	journal	August 2018
Interlayer fracture toughness of additively manufactured unreinforced and carbon-fiber-reinforced acrylonitrile butadiene styrene Young, Devin; Wetmore, Nelson; Czabaj, Michael Additive Manufacturing, Vol. 22 https://doi.org/10.1016/j.addma.2018.02.023	journal	August 2018
Determination of melt processing conditions for high performance amorphous thermoplastics for large format additive manufacturing Ajinjeru, Christine; Kishore, Vidya; Liu, Peng Additive Manufacturing, Vol. 21 https://doi.org/10.1016/j.addma.2018.03.004	journal	May 2018
Effects of Set Curvature and Fiber Bundle Size on the Printed Radius of Curvature by a Continuous Carbon Fiber Composite 3D Printer Matsuzaki, Ryosuke; Nakamura, Taishi; Sugiyama, Kentaro Additive Manufacturing, Vol. 24 https://doi.org/10.1016/j.addma.2018.09.019	journal	December 2018
Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review Farah, Shady; Anderson, Daniel G.; Langer, Robert Advanced Drug Delivery Reviews, Vol. 107 https://doi.org/10.1016/j.addr.2016.06.012	journal	December 2016
A review on stereolithography and its applications in biomedical engineering Melchels, Ferry P. W.; Feijen, Jan; Grijpma, Dirk W. Biomaterials, Vol. 31, Issue 24 https://doi.org/10.1016/j.biomaterials.2010.04.050	journal	August 2010
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites Tian, Xiaoyong; Liu, Tengfei; Yang, Chuncheng Composites Part A: Applied Science and Manufacturing, Vol. 88 https://doi.org/10.1016/j.compositesa.2016.05.032	journal	September 2016
3D printing of composite sandwich structures using continuous carbon fiber and fiber tension Sugiyama, Kentaro; Matsuzaki, Ryosuke; Ueda, Masahito Composites Part A: Applied Science and Manufacturing, Vol. 113 https://doi.org/10.1016/j.compositesa.2018.07.029	journal	October 2018
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling Ning, Fuda; Cong, Weilong; Qiu, Jingjing Composites Part B: Engineering, Vol. 80 https://doi.org/10.1016/j.compositesb.2015.06.013	journal	October 2015
On the reinforcement of cement mortars through 3D printed polymeric and metallic fibers Farina, I.; Fabbrocino, F.; Carpentieri, G. Composites Part B: Engineering, Vol. 90 https://doi.org/10.1016/j.compositesb.2015.12.006	journal	April 2016
Development of in-house composite wire based feed stock filaments of fused deposition modelling for wear-resistant materials and structures Singh, Rupinder; Singh, Sunpreet; Fraternali, Fernando Composites Part B: Engineering, Vol. 98 https://doi.org/10.1016/j.compositesb.2016.05.038	journal	August 2016
Highly oriented carbon fiber–polymer composites via additive manufacturing Tekinalp, Halil L.; Kunc, Vlastimil; Velez-Garcia, Gregorio M. Composites Science and Technology, Vol. 105 https://doi.org/10.1016/j.compscitech.2014.10.009	journal	December 2014
Characterization of residual stress and deformation in additively manufactured ABS polymer and composite specimens Zhang, Wei; Wu, Amanda S.; Sun, Jessica Composites Science and Technology, Vol. 150 https://doi.org/10.1016/j.compscitech.2017.07.017	journal	September 2017
Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures Melenka, Garrett W.; Cheung, Benjamin K. O.; Schofield, Jonathon S. Composite Structures, Vol. 153 https://doi.org/10.1016/j.compstruct.2016.07.018	journal	October 2016
Characterization of 3D printed long fibre reinforced composites Justo, J.; Távara, L.; García-Guzmán, L. Composite Structures, Vol. 185 https://doi.org/10.1016/j.compstruct.2017.11.052	journal	February 2018
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing Li, Nanya; Li, Yingguang; Liu, Shuting Journal of Materials Processing Technology, Vol. 238 https://doi.org/10.1016/j.jmatprotec.2016.07.025	journal	December 2016
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling Masood, S. H.; Song, W. Q. Materials & Design, Vol. 25, Issue 7 https://doi.org/10.1016/j.matdes.2004.02.009	journal	October 2004
Quasicrystal–polymer composites for selective laser sintering technology Kenzari, S.; Bonina, D.; Dubois, J. M. Materials & Design, Vol. 35 https://doi.org/10.1016/j.matdes.2011.10.032	journal	March 2012
Design and evaluation of additively manufactured parts with three dimensional continuous fibre reinforcement Brooks, Hadley; Molony, Samuel Materials & Design, Vol. 90 https://doi.org/10.1016/j.matdes.2015.10.123	journal	January 2016
Laser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites Parandoush, Pedram; Tucker, Levi; Zhou, Chi Materials & Design, Vol. 131 https://doi.org/10.1016/j.matdes.2017.06.013	journal	October 2017
Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics Goh, G. D.; Dikshit, V.; Nagalingam, A. P. Materials & Design, Vol. 137 https://doi.org/10.1016/j.matdes.2017.10.021	journal	January 2018
Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling Liao, Guangxin; Li, Zhixiang; Cheng, Yuchuan Materials & Design, Vol. 139 https://doi.org/10.1016/j.matdes.2017.11.027	journal	February 2018
Effect of core–shell composite particles on the sintering behavior and properties of nano-Al2O3/polystyrene composite prepared by SLS Zheng, Haizhong; Zhang, Jian; Lu, Shiqiang Materials Letters, Vol. 60, Issue 9-10 https://doi.org/10.1016/j.matlet.2005.11.003	journal	May 2006
AddJoining: A novel additive manufacturing approach for layered metal-polymer hybrid structures Falck, R.; Goushegir, S. M.; dos Santos, J. F. Materials Letters, Vol. 217 https://doi.org/10.1016/j.matlet.2018.01.021	journal	April 2018
Bone tissue engineering using 3D printing Bose, Susmita; Vahabzadeh, Sahar; Bandyopadhyay, Amit Materials Today, Vol. 16, Issue 12 https://doi.org/10.1016/j.mattod.2013.11.017	journal	December 2013
Processing and properties of glass bead particulate-filled functionally graded Nylon-11 composites produced by selective laser sintering Chung, Haseung; Das, Suman Materials Science and Engineering: A, Vol. 437, Issue 2 https://doi.org/10.1016/j.msea.2006.07.112	journal	November 2006
Selective Laser Melting Additive Manufacturing of TiC/AlSi10Mg Bulk-form Nanocomposites with Tailored Microstructures and Properties Gu, Dongdong; Wang, Hongqiao; Chang, Fei Physics Procedia, Vol. 56 https://doi.org/10.1016/j.phpro.2014.08.153	journal	January 2014
Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling Caminero, M. A.; Chacón, J. M.; García-Moreno, I. Polymer Testing, Vol. 68 https://doi.org/10.1016/j.polymertesting.2018.04.038	journal	July 2018
Applications of Fiber-Reinforced Polymers in Additive Manufacturing Hofstätter, Thomas; Pedersen, David B.; Tosello, Guido Procedia CIRP, Vol. 66 https://doi.org/10.1016/j.procir.2017.03.171	journal	January 2017
Dieless Forming of Carbon Fibre Reinforced Plastic Parts Using 3D Printer Mori, Ken-ichiro; Maeno, Tomoyoshi; Nakagawa, Yuki Procedia Engineering, Vol. 81 https://doi.org/10.1016/j.proeng.2014.10.196	journal	January 2014
Effect of Fiber Orientation in Fatigue Properties of FRAM Components Imeri, Astrit; Fidan, Ismail; Allen, Michael Procedia Manufacturing, Vol. 26 https://doi.org/10.1016/j.promfg.2018.07.115	journal	January 2018
Model of the selective laser sintering of bisphenol-A polycarbonate Nelson, J. Christian; Xue, Samuel; Barlow, Joel W. Industrial & Engineering Chemistry Research, Vol. 32, Issue 10 https://doi.org/10.1021/ie00022a014	journal	October 1993
Review Carbon fibers for composites Chand, S. Journal of Materials Science, Vol. 35, Issue 6, p. 1303-1313 https://doi.org/10.1023/A:1004780301489	journal	January 2000
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation Matsuzaki, Ryosuke; Ueda, Masahito; Namiki, Masaki Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep23058	journal	March 2016
Bioinspired hierarchical composite design using machine learning: simulation, additive manufacturing, and experiment Gu, Grace X.; Chen, Chun-Teh; Richmond, Deon J. Materials Horizons, Vol. 5, Issue 5 https://doi.org/10.1039/C8MH00653A	journal	January 2018
The Thermal Resistance of Jute and Jute-blend Fabrics Bandyopadhyay, S. K.; Ghose, P. K.; Bose, S. K. Journal of the Textile Institute, Vol. 78, Issue 4 https://doi.org/10.1080/00405008708658249	journal	January 1987
Fabrication and mechanical characterization of continuous carbon fiber-reinforced thermoplastic using a preform by three-dimensional printing and via hot-press molding Yamawaki, Masao; Kouno, Yousuke Advanced Composite Materials, Vol. 27, Issue 2 https://doi.org/10.1080/09243046.2017.1368840	journal	August 2017
Comparison of tribological behaviour for Nylon6-Al-Al ₂ O ₃ and ABS parts fabricated by fused deposition modelling : This paper reports a low cost composite material that is more wear-resistant than conventional ABS Boparai, Kamaljit; Singh, Rupinder; Singh, Harwinder Virtual and Physical Prototyping, Vol. 10, Issue 2 https://doi.org/10.1080/17452759.2015.1037402	journal	April 2015
Rapid Prototyping of Tissue-Engineering Constructs, Using Photopolymerizable Hydrogels and Stereolithography Dhariwala, Busaina; Hunt, Elaine; Boland, Thomas Tissue Engineering, Vol. 10, Issue 9 https://doi.org/10.1089/1076327042500256	journal	September 2004
Rapid Prototyping of Tissue-Engineering Constructs, Using Photopolymerizable Hydrogels and Stereolithography Dhariwala, Busaina; Hunt, Elaine; Boland, Thomas Tissue Engineering, Vol. 10, Issue 9-10 https://doi.org/10.1089/ten.2004.10.1316	journal	September 2004
Thermal characteristics of a new metal/polymer material for FDM rapid prototyping process Masood, S. H.; Song, W. Q. Assembly Automation, Vol. 25, Issue 4 https://doi.org/10.1108/01445150510626451	journal	December 2005
Anisotropic material properties of fused deposition modeling ABS Ahn, Sung‐Hoon; Montero, Michael; Odell, Dan Rapid Prototyping Journal, Vol. 8, Issue 4 https://doi.org/10.1108/13552540210441166	journal	October 2002
Binding mechanisms in selective laser sintering and selective laser melting Kruth, J‐P.; Mercelis, P.; Van Vaerenbergh, J. Rapid Prototyping Journal, Vol. 11, Issue 1 https://doi.org/10.1108/13552540510573365	journal	February 2005
Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate Hill, Nevin; Haghi, Mehrdad Rapid Prototyping Journal, Vol. 20, Issue 3 https://doi.org/10.1108/RPJ-04-2013-0039	journal	April 2014
Additive manufacturing (AM) and nanotechnology: promises and challenges Ivanova, Olga; Williams, Christopher; Campbell, Thomas Rapid Prototyping Journal, Vol. 19, Issue 5 https://doi.org/10.1108/RPJ-12-2011-0127	journal	July 2013
Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures Wu, Jun; Aage, Niels; Westermann, Rudiger IEEE Transactions on Visualization and Computer Graphics, Vol. 24, Issue 2 https://doi.org/10.1109/TVCG.2017.2655523	journal	February 2018
Polymer History Feldman, Dorel Designed Monomers and Polymers, Vol. 11, Issue 1 https://doi.org/10.1163/156855508X292383	journal	January 2008
Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties Ning, Fuda; Cong, Weilong; Hu, Yingbin Journal of Composite Materials, Vol. 51, Issue 4 https://doi.org/10.1177/0021998316646169	journal	July 2016
Fabrication and characterization of 3D printed BaTiO ₃ /PVDF nanocomposites Kim, Hoejin; Fernando, Torres; Li, Mingyue Journal of Composite Materials, Vol. 52, Issue 2 https://doi.org/10.1177/0021998317704709	journal	April 2017
Mechanical properties of fiber reinforced polymer composites: A comparative study of conventional and additive manufacturing methods Agarwal, Kuldeep; Kuchipudi, Suresh K.; Girard, Benoit Journal of Composite Materials, Vol. 52, Issue 23 https://doi.org/10.1177/0021998318762297	journal	March 2018
State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies Hofstätter, Thomas; Pedersen, David B.; Tosello, Guido Journal of Reinforced Plastics and Composites, Vol. 36, Issue 15 https://doi.org/10.1177/0731684417695648	journal	April 2017
Tensile properties, void contents, dispersion and fracture behaviour of 3D printed carbon nanofiber reinforced composites Papon, Easir Arafat; Haque, Anwarul Journal of Reinforced Plastics and Composites, Vol. 37, Issue 6 https://doi.org/10.1177/0731684417750477	journal	January 2018
Fiber-Reinforced Composites Mallick, P. K. https://doi.org/10.1201/9781420005981	book	November 2007
Fabrication of porous polymeric matrix drug delivery devices using the selective laser sintering technique Leong, K. F.; Phua, K. K. S.; Chua, C. K. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Vol. 215, Issue 2 https://doi.org/10.1243/0954411011533751	journal	February 2001
The importance of carbon fiber to polymer additive manufacturing Love, Lonnie J.; Kunc, Vlastamil; Rios, Orlando Journal of Materials Research, Vol. 29, Issue 17 https://doi.org/10.1557/jmr.2014.212	journal	September 2014
Construção de Scaffolds para engenharia tecidual utilizando prototipagem rápida Oliveira, Marcelo F.; Maia, Izaque A.; Noritomi, Pedro Y. Matéria (Rio de Janeiro), Vol. 12, Issue 2 https://doi.org/10.1590/S1517-70762007000200016	journal	January 2007
An Analysis Framework for Topology Optimization of 3D Printed Reinforced Composites Bahamonde, Luis G.; Tatting, Brian; Harik, Ramy 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference https://doi.org/10.2514/6.2018-0093	conference	January 2018
Process-Induced Fiber Orientation in Fused Filament Fabrication Mulholland, Tom; Goris, Sebastian; Boxleitner, Jake Journal of Composites Science, Vol. 2, Issue 3 https://doi.org/10.3390/jcs2030045	journal	August 2018
UV-Assisted 3D Printing of Glass and Carbon Fiber-Reinforced Dual-Cure Polymer Composites Invernizzi, Marta; Natale, Gabriele; Levi, Marinella Materials, Vol. 9, Issue 7 https://doi.org/10.3390/ma9070583	journal	July 2016
3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens Der Klift, Frank Van; Koga, Yoichiro; Todoroki, Akira Open Journal of Composite Materials, Vol. 06, Issue 01 https://doi.org/10.4236/ojcm.2016.61003	journal	January 2016
Big Area Additive Manufacturing and Hardware-in-the-Loop for Rapid Vehicle Powertrain Prototyping: A Case Study on the Development of a 3-D-Printed Shelby Cobra Curran, Scott; Chambon, Paul; Lind, Randall SAE 2016 World Congress and Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2016-01-0328	conference	April 2016
Infill Optimization for Additive Manufacturing -- Approaching Bone-like Porous Structures Wu, Jun; Aage, Niels; Westermann, Ruediger arXiv https://doi.org/10.48550/arxiv.1608.04366	text	January 2016

Cited By (1)

A review of important considerations in the compression molding process of short natural fiber composites Jaafar, Jamiluddin; Siregar, Januar Parlaungan; Tezara, Cionita The International Journal of Advanced Manufacturing Technology, Vol. 105, Issue 7-8 https://doi.org/10.1007/s00170-019-04466-8	journal	November 2019

Similar Records

Additively manufactured carbon fiber-reinforced composites: State of the art and perspective

Journal Article · 2019 · Additive Manufacturing · OSTI ID:1649586

Van de Werken, Nekoda; Tekinalp, Halil; Khanbolouki, Pouria; +3 more

Additive Manufacturing of Lightweight Structures: Microfibrillated Cellulose – PLA Biofoams

Conference · 2021 · OSTI ID:2439019

Tekinalp, Halil; Dopatka, Stefan; Smith, Tyler; +5 more

MICRO-CELLULOSE FIBER REINFORCED BIOCOMPOSITES FOR ADDITIVE MANUFACTURING

Conference · 2018 · OSTI ID:1558556

Tekinalp, Halil; Ker, Darby; Benson, Bowie J.; +3 more

Related Subjects

36 MATERIALS SCIENCE
Composite
Fiber
Fiber reinforced additive manufacturing
Matrix
Polymer
Reinforcement

Title: The trends and challenges of fiber reinforced additive manufacturing

Citation Formats

References (89)

Cited By (1)

Similar Records

Related Subjects