Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method

Li, Mu; Gazquez, Jaume; Borisevich, Albina; Mishra, Rohan; Flores, Katharine M.

doi:10.1016/j.intermet.2018.01.021

Title: Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method

Full Record
Other Related Research

Authors:: Li, Mu; Gazquez, Jaume; Borisevich, Albina; Mishra, Rohan; Flores, Katharine M.

Publication Date:: Sun Apr 01 00:00:00 EDT 2018

Sponsoring Org.:: USDOE

OSTI Identifier:: 1496376

Grant/Contract Number:: 2012-11709

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Intermetallics

Additional Journal Information:: Journal Name: Intermetallics Journal Volume: 95 Journal Issue: C; Journal ID: ISSN 0966-9795

Publisher:: Elsevier

Country of Publication:: United Kingdom

Language:: English

Citation Formats


                    Li, Mu, Gazquez, Jaume, Borisevich, Albina, Mishra, Rohan, and Flores, Katharine M. Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method.  United Kingdom: N. p., 2018. 
Web.  doi:10.1016/j.intermet.2018.01.021.

Copy to clipboard


                    Li, Mu, Gazquez, Jaume, Borisevich, Albina, Mishra, Rohan, & Flores, Katharine M. Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method.  United Kingdom.  https://doi.org/10.1016/j.intermet.2018.01.021

Copy to clipboard


                    Li, Mu, Gazquez, Jaume, Borisevich, Albina, Mishra, Rohan, and Flores, Katharine M. Sun .  
"Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method".  United Kingdom.  https://doi.org/10.1016/j.intermet.2018.01.021.

Copy to clipboard


                    
@article{osti_1496376,

  title        = {Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method},

  author       = {Li, Mu and Gazquez, Jaume and Borisevich, Albina and Mishra, Rohan and Flores, Katharine M.},

  abstractNote = {},

  doi          = {10.1016/j.intermet.2018.01.021},

  journal      = {Intermetallics},

  number       = C,

  volume       = 95,

  place        = {United Kingdom},

  year         = {Sun Apr 01 00:00:00 EDT 2018},

  month        = {Sun Apr 01 00:00:00 EDT 2018}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.intermet.2018.01.021

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 85 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Laser metal deposition of refractory high-entropy alloys for high-throughput synthesis and structure-property characterization

Journal Article Dobbelstein, Henrik ; George, Easo P. ; Gurevich, Evgeny L. ; ... - International Journal of Extreme Manufacturing

Progress in materials development is often paced by the time required to produce and evaluate a large number of alloys with different chemical compositions. This applies especially to refractory high-entropy alloys (RHEAs), which are difficult to synthesize and process by conventional methods. To evaluate a possible way to accelerate the process, high-throughput laser metal deposition was used in this work to prepare a quinary RHEA, TiZrNbHfTa, as well as its quaternary and ternary subsystems by in-situ alloying of elemental powders. Compositionally graded variants of the quinary RHEA were also analyzed. Our results show that the influence of various parameters suchmore »« less
https://doi.org/10.1088/2631-7990/abcca8

Full Text Available
Microstructures and mechanical properties of dispersion-strengthened high-temperature Al-8. 5Fe-1. 2V-1. 7Si alloys produced by atomized melt deposition process

Journal Article Hariprasad, S ; Sastry, S M.L. ; Jerina, K L ; ... - Metallurgical Transactions, A (Physical Metallurgy and Materials Science); (United States)

Dispersion-strengthened high-temperature Al-8.5% FeSiV alloys were produced by atomized melt deposition (AMD) process. The effects of process parameters on the evolution of microstructures were determined using optical metallography and scanning and transmission electron microscopy. The extent of undercooling and the rate of droplet solidification wee correlated with process parameters, such as melt superheat, metal/gas flow rates, and melt stream diameter. The size distribution and morphology of silicide dispersoids were used to estimate the degree of undercooling and the cooling rate as functions of process parameters. The tensile properties at 25C to 425C and fracture toughness at 25C of these alloysmore »« less
https://doi.org/10.1007/BF02656507
Damping behavior of AlxCoCrFeNi high-entropy alloys by a dynamic mechanical analyzer

Journal Article Ma, S G ; Liaw, P K ; Gao, M C ; ... - Journal of Alloys and Compounds
https://doi.org/10.1016/j.jallcom.2014.03.050
The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermo-mechanically treated Fe_40.4Ni_11.3Mn_34.8Al_7.5Cr₆ high entropy alloys

Journal Article Wang, Zhangwei ; Baker, Ian ; Guo, Wei ; ... - Acta Materialia

We investigated the effects of cold rolling followed by annealing on the mechanical properties and dislocation substructure evolution of undoped and 1.1 at. % carbon-doped Fe_40.4Ni_11.3Mn_34.8Al_7.5Cr₆ high entropy alloys (HEAs). X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atom probe tomography (APT) were employed to characterize the microstructures. The as-cast HEAs were coarse-grained and single phase f.c.c., whereas the thermo-mechanical treatment caused recrystallization (to fine grain sizes) and precipitation (a B2 phase for the undoped HEA; and a B2 phase, and M₂₃C₆ and M₇C₃ carbides for the C-doped HEA). Carbon, which was found to have segregated tomore »« less
Cited by 152
https://doi.org/10.1016/j.actamat.2016.12.074

Full Text Available
The microstructure and mechanical behaviors of the Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy produced by laser melting deposition

Journal Article Liu, Zheng ; Qin, Zuo-Xiang ; Liu, Fang ; ... - Materials Characterization

The microstructure and mechanical properties of the Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy produced by laser melting deposition have been investigated. The columnar grains of the Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy due to the layer-by-layer epitaxial growth from the underlying template grains during laser melting deposition, which is roughly parallel to the deposition direction, had been found by optical microscopy; strong [101{sup ¯}2]{sub α} crystallographic texture has been confirmed by X-ray diffraction and electron backscattered diffraction. Depending on the last heating history, the microstructure of the alloy undergoes a continued change opposite to the deposition direction: martensitic α′ (transformed β); coarsened primary α laths with transformed β;more »« less
https://doi.org/10.1016/J.MATCHAR.2014.09.002

Similar Records