Identifying strain localization and dislocation processes in fatigued Inconel 718 manufactured from selective laser melting

Yoo, Yung Suk Jeremy; Book, Todd A.; Sangid, Michael D.; Kacher, Josh

doi:10.1016/j.msea.2018.03.127

Title: Identifying strain localization and dislocation processes in fatigued Inconel 718 manufactured from selective laser melting

Journal Article · 01 May 2018 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

DOI: https://doi.org/10.1016/j.msea.2018.03.127 · OSTI ID:1496332

Yoo, Yung Suk Jeremy; Book, Todd A.;

; Kacher, Josh

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

Grant/Contract Number:: AC02-05CH11231

OSTI ID:: 1496332

Journal Information:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, Journal Name: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing Journal Issue: C Vol. 724; ISSN 0921-5093

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (47)

Influence of grain size on the mechanical behaviour of some high strength materials Lasalmonie, A.; Strudel, J. L. Journal of Materials Science, Vol. 21, Issue 6 https://doi.org/10.1007/BF00547918	journal	June 1986
Inhomogeneous deformation in INCONEL 718 during monotonic and cyclic loadings Worthem, D. W.; Robertson, I. M.; Leckie, F. A. Metallurgical Transactions A, Vol. 21, Issue 12 https://doi.org/10.1007/BF02647316	journal	December 1990
Effect of dislocation substructures on fatigue fracture Laird, Campbell Metallurgical Transactions A, Vol. 8, Issue 6 https://doi.org/10.1007/BF02661566	journal	June 1977
Low cycle fatigue behavior of inconel 718 at 298 K and 823 K Fournier, D.; Pineau, A. Metallurgical Transactions A, Vol. 8, Issue 7 https://doi.org/10.1007/BF02667395	journal	July 1977
Directional and single-crystal solidification of Ni-base superalloys: Part I. The role of curved isotherms on grain selection D’Souza, N.; Ardakani, M. G.; McLean, M. Metallurgical and Materials Transactions A, Vol. 31, Issue 11 https://doi.org/10.1007/BF02830351	journal	November 2000
Additive manufacturing: technology, applications and research needs Guo, Nannan; Leu, Ming C. Frontiers of Mechanical Engineering, Vol. 8, Issue 3 https://doi.org/10.1007/s11465-013-0248-8	journal	May 2013
Effect of boron on the low-cycle fatigue behavior and deformation structure of INCONEL 718 at 650 °C Xiao, L.; Chaturvedi, M. C.; Chen, D. L. Metallurgical and Materials Transactions A, Vol. 35, Issue 11 https://doi.org/10.1007/s11661-004-0185-6	journal	November 2004
Metal Additive Manufacturing: A Review Frazier, William E. Journal of Materials Engineering and Performance, Vol. 23, Issue 6 https://doi.org/10.1007/s11665-014-0958-z	journal	April 2014
Producing titanium aerospace components from powder using laser forming Arcella, Frank G.; Froes, F. H. JOM, Vol. 52, Issue 5 https://doi.org/10.1007/s11837-000-0028-x	journal	May 2000
Deformation behaviour of γ″ strengthened inconel 718 Sundararaman, M.; Mukhopadhyay, P.; Banerjee, S. Acta Metallurgica, Vol. 36, Issue 4 https://doi.org/10.1016/0001-6160(88)90139-3	journal	April 1988
An investigation of the effect of pre-straining on fatigue crack growth Radhakrishnan, V. M.; Baburamani, P. S. Materials Science and Engineering, Vol. 17, Issue 2 https://doi.org/10.1016/0025-5416(75)90237-2	journal	February 1975
Effect of prior cold work on the room-temperature low-cycle fatigue behaviour of AISI 304LN stainless steel Ganesh Sundara Raman, S. International Journal of Fatigue, Vol. 18, Issue 2 https://doi.org/10.1016/0142-1123(95)00078-X	journal	February 1996
Factors determining crystal orientation of dendritic growth during solidification Lee, Dong Nyung; Kim, Kyung-hyun; Lee, Yong-gi Materials Chemistry and Physics, Vol. 47, Issue 2-3 https://doi.org/10.1016/S0254-0584(97)80044-2	journal	February 1997
MTDATA - thermodynamic and phase equilibrium software from the national physical laboratory Davies, Rh; Dinsdale, At; Gisby, Ja Calphad, Vol. 26, Issue 2 https://doi.org/10.1016/S0364-5916(02)00036-6	journal	June 2002
Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 718 Rao, G. Appa; Kumar, Mahendra; Srinivas, M. Materials Science and Engineering: A, Vol. 355, Issue 1-2 https://doi.org/10.1016/S0921-5093(03)00079-0	journal	August 2003
Progress in structural materials for aerospace systems11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh. Williams, James C.; Starke, Edgar A. Acta Materialia, Vol. 51, Issue 19 https://doi.org/10.1016/j.actamat.2003.08.023	journal	November 2003
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting Amato, K. N.; Gaytan, S. M.; Murr, L. E. Acta Materialia, Vol. 60, Issue 5 https://doi.org/10.1016/j.actamat.2011.12.032	journal	March 2012
Role of heat treatment and build orientation in the microstructure sensitive deformation characteristics of IN718 produced via SLM additive manufacturing Sangid, Michael D.; Book, Todd A.; Naragani, Diwakar Additive Manufacturing, Vol. 22 https://doi.org/10.1016/j.addma.2018.04.032	journal	August 2018
Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants Traini, T.; Mangano, C.; Sammons, R. L. Dental Materials, Vol. 24, Issue 11 https://doi.org/10.1016/j.dental.2008.03.029	journal	November 2008
Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering Ventola, Luigi; Robotti, Francesco; Dialameh, Masoud International Journal of Heat and Mass Transfer, Vol. 75 https://doi.org/10.1016/j.ijheatmasstransfer.2014.03.037	journal	August 2014
Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties Jia, Qingbo; Gu, Dongdong Journal of Alloys and Compounds, Vol. 585 https://doi.org/10.1016/j.jallcom.2013.09.171	journal	February 2014
Formation of metastable cellular microstructures in selective laser melted alloys Prashanth, K. G.; Eckert, J. Journal of Alloys and Compounds, Vol. 707 https://doi.org/10.1016/j.jallcom.2016.12.209	journal	June 2017
Effect of molten pool boundaries on the mechanical properties of selective laser melting parts Shifeng, Wen; Shuai, Li; Qingsong, Wei Journal of Materials Processing Technology, Vol. 214, Issue 11 https://doi.org/10.1016/j.jmatprotec.2014.06.002	journal	November 2014
Electron microscopy study of direct laser deposited IN718 Ding, R. G.; Huang, Z. W.; Li, H. Y. Materials Characterization, Vol. 106 https://doi.org/10.1016/j.matchar.2015.06.017	journal	August 2015
Medical design: Direct metal laser sintering of Ti–6Al–4V Bertol, Liciane Sabadin; Júnior, Wilson Kindlein; Silva, Fabio Pinto da Materials & Design, Vol. 31, Issue 8 https://doi.org/10.1016/j.matdes.2010.02.050	journal	September 2010
The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing Kuo, Yen-Ling; Horikawa, Shota; Kakehi, Koji Materials & Design, Vol. 116 https://doi.org/10.1016/j.matdes.2016.12.026	journal	February 2017
Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features Simchi, A. Materials Science and Engineering: A, Vol. 428, Issue 1-2 https://doi.org/10.1016/j.msea.2006.04.117	journal	July 2006
The influence of soft, precipitate-free zones at grain boundaries in Ti and Al alloys on their fatigue and fracture behavior Lütjering, G.; Albrecht, J.; Sauer, C. Materials Science and Engineering: A, Vol. 468-470 https://doi.org/10.1016/j.msea.2006.07.168	journal	November 2007
Grain boundary characterization and energetics of superalloys Sangid, Michael D.; Sehitoglu, Huseyin; Maier, Hans J. Materials Science and Engineering: A, Vol. 527, Issue 26 https://doi.org/10.1016/j.msea.2010.07.062	journal	October 2010
Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy Vilaro, T.; Colin, C.; Bartout, J. D. Materials Science and Engineering: A, Vol. 534 https://doi.org/10.1016/j.msea.2011.11.092	journal	February 2012
Inconel 939 processed by selective laser melting: Effect of microstructure and temperature on the mechanical properties under static and cyclic loading Kanagarajah, P.; Brenne, F.; Niendorf, T. Materials Science and Engineering: A, Vol. 588 https://doi.org/10.1016/j.msea.2013.09.025	journal	December 2013
Hardened austenite steel with columnar sub-grain structure formed by laser melting Saeidi, K.; Gao, X.; Zhong, Y. Materials Science and Engineering: A, Vol. 625 https://doi.org/10.1016/j.msea.2014.12.018	journal	February 2015
Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting Chlebus, E.; Gruber, K.; Kuźnicka, B. Materials Science and Engineering: A, Vol. 639 https://doi.org/10.1016/j.msea.2015.05.035	journal	July 2015
Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy Zhang, Dongyun; Niu, Wen; Cao, Xuanyang Materials Science and Engineering: A, Vol. 644 https://doi.org/10.1016/j.msea.2015.06.021	journal	September 2015
On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading Aydinöz, M. E.; Brenne, F.; Schaper, M. Materials Science and Engineering: A, Vol. 669 https://doi.org/10.1016/j.msea.2016.05.089	journal	July 2016
Superior creep strength of a nickel-based superalloy produced by selective laser melting Pröbstle, M.; Neumeier, S.; Hopfenmüller, J. Materials Science and Engineering: A, Vol. 674 https://doi.org/10.1016/j.msea.2016.07.061	journal	September 2016
Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy Lu, Yanjin; Wu, Songquan; Gan, Yiliang Optics & Laser Technology, Vol. 75 https://doi.org/10.1016/j.optlastec.2015.07.009	journal	December 2015
Microstructure and directional fatigue behavior of Inconel 718 produced by selective laser melting Konečná, Radomila; Nicoletto, Gianni; Kunz, Ludvík Procedia Structural Integrity, Vol. 2 https://doi.org/10.1016/j.prostr.2016.06.298	journal	January 2016
Bragg's Law diffraction simulations for electron backscatter diffraction analysis Kacher, Josh; Landon, Colin; Adams, Brent L. Ultramicroscopy, Vol. 109, Issue 9 https://doi.org/10.1016/j.ultramic.2009.04.007	journal	August 2009
Estimations of bulk geometrically necessary dislocation density using high resolution EBSD Ruggles, T. J.; Fullwood, D. T. Ultramicroscopy, Vol. 133 https://doi.org/10.1016/j.ultramic.2013.04.011	journal	October 2013
MicroStamping for Improved Speckle Patterns to Enable Digital Image Correlation Cannon, Andrew H.; Hochhalter, Jacob D.; Mello, Alberto W. Microscopy and Microanalysis, Vol. 21, Issue S3 https://doi.org/10.1017/S1431927615003050	journal	August 2015
Additively manufactured hierarchical stainless steels with high strength and ductility Wang, Y. Morris; Voisin, Thomas; McKeown, Joseph T. Nature Materials, Vol. 17, Issue 1 https://doi.org/10.1038/nmat5021	journal	October 2017
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing Basak, Amrita; Das, Suman Annual Review of Materials Research, Vol. 46, Issue 1 https://doi.org/10.1146/annurev-matsci-070115-031728	journal	July 2016
Laser Rapid Manufacturing of Stainless Steel 316L/Inconel718 Functionally Graded Materials: Microstructure Evolution and Mechanical Properties Wu, Dongjiang; Liang, Xiaokang; Li, Qian International Journal of Optics, Vol. 2010 https://doi.org/10.1155/2010/802385	journal	January 2010
Characterisation of hot isostatically pressed nickel base superalloy Inconel* 718 Rao, G. Appa; Prasad, K. Satya; Kumar, M. Materials Science and Technology, Vol. 19, Issue 3 https://doi.org/10.1179/026708303225010605	journal	March 2003
Laser additive manufacturing of metallic components: materials, processes and mechanisms Gu, D. D.; Meiners, W.; Wissenbach, K. International Materials Reviews, Vol. 57, Issue 3, p. 133-164 https://doi.org/10.1179/1743280411Y.0000000014	journal	May 2012
High resolution mapping of strains and rotations using electron backscatter diffraction Wilkinson, A. J.; Meaden, G.; Dingley, D. J. Materials Science and Technology, Vol. 22, Issue 11 https://doi.org/10.1179/174328406X130966	journal	November 2006

Similar Records

Mechanical behavior of post-processed Inconel 718 manufactured through the electron beam melting process

Journal Article · 2016 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1335303

Kirka, Michael M.; Medina, Frank; Dehoff, Ryan R.; +1 more

Mechanical properties and microstructure evolution of selective laser melting Inconel 718 along building direction and sectional dimension

Journal Article · 2020 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:2280240

Zhang, Baicheng; Wang, Pei; Chew, Youxiang; +5 more

Build Orientation Effects on Texture and Mechanical Properties of Selective Laser Melting Inconel 718

Journal Article · 2019 · Journal of Materials Engineering and Performance · OSTI ID:22970852

McLouth, T. D.; Witkin, D. B.; Sitzman, S. D.; +2 more

Title: Identifying strain localization and dislocation processes in fatigued Inconel 718 manufactured from selective laser melting

Citation Formats

References (47)

Similar Records

Related Subjects