Influence of hot isostatic pressing on the performance of aluminum alloy fabricated by ultrasonic additive manufacturing

Gussev, M. N.; Sridharan, N.; Thompson, Z.; Terrani, K. A.; Babu, S. S.

doi:10.1016/j.scriptamat.2017.10.004

Title: Influence of hot isostatic pressing on the performance of aluminum alloy fabricated by ultrasonic additive manufacturing

Journal Article · 16 October 2018 · Scripta Materialia

DOI: https://doi.org/10.1016/j.scriptamat.2017.10.004 · OSTI ID:1495987

Gussev, M. N. ^[1]; Sridharan, N. ^[2]; Thompson, Z. ^[1]; Terrani, K. A. ^[1]; Babu, S. S. ^[2]

Univ. of Tennessee, Knoxville, TN (United States)
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States)

Ultrasonic additive manufacturing (UAM) is a solid-state manufacturing technique employing principles of ultrasonic welding coupled with mechanized tape layering to fabricate fully functional parts. However, UAM-fabricated parts often exhibit a reduction in strength when loaded normal to the welding interfaces (Z-direction). Here, the effect of hot isostatic pressing (HIP) on UAM builds of aluminum alloy was explored. Tensile testing and microstructure characterization were conducted; it was established that HIP eliminated the brittle Z-direction fracture and improved the strength and ductility of the Z-direction specimens. HIP eliminated voids and produced recrystallized structure; however, welding interfaces survived the HIP treatment.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE

Grant/Contract Number:: AC05-00OR22725

OSTI ID:: 1495987

Journal Information:: Scripta Materialia, Journal Name: Scripta Materialia Journal Issue: C Vol. 145; ISSN 1359-6462

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (21)

Serrated flow in aluminum 6061 alloy Cetlin, P. R.; Güleç, A. Ş.; Reed-Hill, R. E. Metallurgical Transactions, Vol. 4, Issue 2 https://doi.org/10.1007/BF02648704	journal	February 1973
Solid-State Additive Manufacturing for Heat Exchangers Norfolk, Mark; Johnson, Hilary JOM, Vol. 67, Issue 3 https://doi.org/10.1007/s11837-015-1299-6	journal	February 2015
Effect of process parameters on bond formation during ultrasonic consolidation of aluminum alloy 3003 Janaki Ram, G. D.; Yang, Y.; Stucker, B. E. Journal of Manufacturing Systems, Vol. 25, Issue 3 https://doi.org/10.1016/S0278-6125(07)80011-2	journal	January 2006
Characterisation of aluminium alloy 6061 for the ultrasonic consolidation process Kong, C. Y.; Soar, R. C.; Dickens, P. M. Materials Science and Engineering: A, Vol. 363, Issue 1-2 https://doi.org/10.1016/S0921-5093(03)00590-2	journal	December 2003
Three types of Portevin–Le Chatelier effects: Experiment and modelling Jiang, Huifeng; Zhang, Qingchuan; Chen, Xuedong Acta Materialia, Vol. 55, Issue 7 https://doi.org/10.1016/j.actamat.2006.10.029	journal	April 2007
Mechanism of weld formation during very-high-power ultrasonic additive manufacturing of Al alloy 6061 Shimizu, S.; Fujii, H. T.; Sato, Y. S. Acta Materialia, Vol. 74 https://doi.org/10.1016/j.actamat.2014.04.043	journal	August 2014
Rationalization of anisotropic mechanical properties of Al-6061 fabricated using ultrasonic additive manufacturing Sridharan, Niyanth; Gussev, Maxim; Seibert, Rachel Acta Materialia, Vol. 117 https://doi.org/10.1016/j.actamat.2016.06.048	journal	September 2016
Optimum process parameters for ultrasonic consolidation of 3003 aluminium Kong, C. Y.; Soar, R. C.; Dickens, P. M. Journal of Materials Processing Technology, Vol. 146, Issue 2 https://doi.org/10.1016/j.jmatprotec.2003.10.016	journal	February 2004
Effects of ARB and ageing processes on mechanical properties and microstructure of 6061 aluminum alloy Rezaei, Mohammad Reza; Toroghinejad, Mohammad Reza; Ashrafizadeh, Fakhreddin Journal of Materials Processing Technology, Vol. 211, Issue 6 https://doi.org/10.1016/j.jmatprotec.2011.01.023	journal	June 2011
Process improvements and characterization of ultrasonic additive manufactured structures Wolcott, P. J.; Hehr, A.; Pawlowski, C. Journal of Materials Processing Technology, Vol. 233 https://doi.org/10.1016/j.jmatprotec.2016.02.009	journal	July 2016
Effect of post-weld aging treatment on mechanical properties of Tungsten Inert Gas welded low thickness 7075 aluminium alloy joints Temmar, M.; Hadji, M.; Sahraoui, T. Materials & Design, Vol. 32, Issue 6 https://doi.org/10.1016/j.matdes.2011.02.011	journal	June 2011
Effect of a post-weld heat treatment on the mechanical and microstructure properties of AA6061 joints welded by the gas metal arc welding cold metal transfer method Ahmad, R.; Bakar, M. A. Materials & Design, Vol. 32, Issue 10 https://doi.org/10.1016/j.matdes.2011.06.007	journal	December 2011
Effect of post-weld heat treatment and electrolytic plasma processing on tungsten inert gas welded AISI 4140 alloy steel Dewan, Mohammad W.; Liang, Jiandong; Wahab, M. A. Materials & Design (1980-2015), Vol. 54 https://doi.org/10.1016/j.matdes.2013.08.035	journal	February 2014
Plastic flow and work hardening of Al alloy matrices during ultrasonic consolidation fibre embedding process Li, Dezhi; Soar, Rupert C. Materials Science and Engineering: A, Vol. 498, Issue 1-2 https://doi.org/10.1016/j.msea.2008.08.037	journal	December 2008
The effect of hot isostatic pressing on crack healing, microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming Zhao, Xiaoming; Lin, Xin; Chen, Jing Materials Science and Engineering: A, Vol. 504, Issue 1-2 https://doi.org/10.1016/j.msea.2008.12.024	journal	March 2009
Exploring the mechanical strength of additively manufactured metal structures with embedded electrical materials Li, J.; Monaghan, T.; Masurtschak, S. Materials Science and Engineering: A, Vol. 639 https://doi.org/10.1016/j.msea.2015.05.019	journal	July 2015
Adiabatic shear localization in ultrafine grained 6061 aluminum alloy Wang, Bingfeng; Ma, Rui; Zhou, Jindian Materials Science and Engineering: A, Vol. 675 https://doi.org/10.1016/j.msea.2016.08.042	journal	October 2016
Effect of post weld heat treatment on the 6061 aluminum alloy produced by ultrasonic additive manufacturing Gussev, M. N.; Sridharan, N.; Norfolk, M. Materials Science and Engineering: A, Vol. 684 https://doi.org/10.1016/j.msea.2016.12.083	journal	January 2017
Post‐processing of selective laser sintered metal parts Agarwala, Mukesh; Bourell, David; Beaman, Joseph Rapid Prototyping Journal, Vol. 1, Issue 2 https://doi.org/10.1108/13552549510086853	journal	June 1995
Statistical Characterization of Ultrasonic Additive Manufacturing Ti/Al Composites Hopkins, C. D.; Dapino, M. J.; Fernandez, S. A. Journal of Engineering Materials and Technology, Vol. 132, Issue 4 https://doi.org/10.1115/1.4002073	journal	September 2010
Optimized welding parameters for Al 6061 ultrasonic additive manufactured structures Wolcott, Paul J.; Hehr, Adam; Dapino, Marcelo J. Journal of Materials Research, Vol. 29, Issue 17 https://doi.org/10.1557/jmr.2014.139	journal	July 2014

Cited By (4)

Influence of Isostatic Pressure on the Superconducting Performance of Nb ₃ Al Prepared by Low‐Temperature Sintering Zhao, Huanhuan; Li, Xinhua; Ma, Qingshuang physica status solidi (b), Vol. 257, Issue 1 https://doi.org/10.1002/pssb.201900238	journal	September 2019
Influence of hot isostatic pressing on structure and properties of titanium cold-spray deposits Petrovskiy, P.; Sova, A.; Doubenskaia, M. The International Journal of Advanced Manufacturing Technology, Vol. 102, Issue 1-4 https://doi.org/10.1007/s00170-018-03233-5	journal	January 2019
Ultrasonic additive manufacturing of 4130 steel using Ni interlayers Kuo, Chih-Hsiang; Sridharan, Niyanth; Han, Tianyang Science and Technology of Welding and Joining, Vol. 24, Issue 5 https://doi.org/10.1080/13621718.2019.1607486	journal	May 2019
Microstructures, properties, and applications of laser sintered 17‐4PH stainless steel Irrinki, Harish; Nath, Subrata Deb; Alhofors, Magnus Journal of the American Ceramic Society, Vol. 102, Issue 9 https://doi.org/10.1111/jace.16372	journal	February 2019

Similar Records

Ultrasonic additive manufacturing of steel: Method, post-processing treatments and properties

Journal Article · 2018 · Journal of Materials Processing Technology · OSTI ID:1471846

Levy, Asaf; Miriyev, Aslan; Sridharan, Niyanth; +5 more

Microstructural Characterization of Bonding Interfaces in Aluminum 3003 Blocks Fabricated by Ultrasonic Additive Manufacturing

Journal Article · 2009 · Welding Research Council · OSTI ID:1049207

Schick, D. E.; Babu, Sudarsanam Suresh; Lippold, John C; +4 more

Evaluation of microstructure stability at the interfaces of Al-6061 welds fabricated using ultrasonic additive manufacturing

Journal Article · 2018 · Materials Characterization · OSTI ID:1435327

Sridharan, Niyanth S.; Gussev, Maxim N.; Parish, Chad M.; +4 more

Related Subjects

36 MATERIALS SCIENCE
Electron back scatter diffraction
Hot isostatic pressing
Tensile tests
Ultrasonic additive manufacturing

Title: Influence of hot isostatic pressing on the performance of aluminum alloy fabricated by ultrasonic additive manufacturing

Citation Formats

References (21)

Cited By (4)

Similar Records

Related Subjects