DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Superior wear resistance of diamond and DLC coatings

Abstract

As the hardest known material, diamond and its coatings continue to generate significant attention for stringent applications involving extreme tribological conditions. Likewise, diamond-like carbon (DLC, especially the tetragonal amorphous carbon, ta-C) coatings have also maintained a high level interest for numerous industrial applications where efficiency, performance, and reliability are of great importance. Additionally, the strong covalent bonding or sp3-hybridizaiton in diamond and ta-C coatings assures high mechanical hardness, stiffness, chemical and thermal stability that make them well-suited for harsh tribological conditions involving high-speeds, loads, and temperatures. In particular, unique chemical and mechanical nature of diamond and ta-C surfaces plays an important role in their unusual friction and wear behaviors. As with all other tribomaterials, both diamond and ta-C coatings strongly interact with the chemical species in their surroundings during sliding and hence produce a chemically passive top surface layer which ultimately determines the extent of friction and wear. Thick micro-crystalline diamond films are most preferred for tooling applications, while thinner nano/ultranano-crysalline diamond films are well-suited for mechanical devices ranging from nano- (such as NEMS) to micro- (MEMS and AFM tips) as well as macro-scale devices including mechanical pump seals. The ta-C coatings have lately become indispensable for a variety ofmore » automotive applications and are used in very large volumes in tappets, piston pins, rings, and a variety of gears and bearings, especially in the Asian market. This paper is intended to provide a comprehensive overview of the recent developments in tribology of super-hard diamond and DLC (ta-C) films with a special emphasis on their friction and wear mechanisms that are key to their extraordinary tribological performance under harsh tribological conditions. Finally, based on the results of recent studies, the paper will also attempt to highlight what lies ahead for these films in tribology and other demanding industrial applications.« less

Authors:
 [1];  [2]
  1. Argonne National Lab. (ANL), Argonne, IL (United States)
  2. University of Lyon (France)
Publication Date:
Research Org.:
Argonne National Laboratory (ANL), Argonne, IL (United States)
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office (EE-3V)
OSTI Identifier:
1494310
Grant/Contract Number:  
AC02-06CH11357
Resource Type:
Accepted Manuscript
Journal Name:
Current Opinion in Solid State and Materials Science
Additional Journal Information:
Journal Volume: 22; Journal Issue: 6; Journal ID: ISSN 1359-0286
Publisher:
Elsevier
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE

Citation Formats

Erdemir, Ali, and Martin, Jean Michel. Superior wear resistance of diamond and DLC coatings. United States: N. p., 2018. Web. doi:10.1016/j.cossms.2018.11.003.
Erdemir, Ali, & Martin, Jean Michel. Superior wear resistance of diamond and DLC coatings. United States. https://doi.org/10.1016/j.cossms.2018.11.003
Erdemir, Ali, and Martin, Jean Michel. Tue . "Superior wear resistance of diamond and DLC coatings". United States. https://doi.org/10.1016/j.cossms.2018.11.003. https://www.osti.gov/servlets/purl/1494310.
@article{osti_1494310,
title = {Superior wear resistance of diamond and DLC coatings},
author = {Erdemir, Ali and Martin, Jean Michel},
abstractNote = {As the hardest known material, diamond and its coatings continue to generate significant attention for stringent applications involving extreme tribological conditions. Likewise, diamond-like carbon (DLC, especially the tetragonal amorphous carbon, ta-C) coatings have also maintained a high level interest for numerous industrial applications where efficiency, performance, and reliability are of great importance. Additionally, the strong covalent bonding or sp3-hybridizaiton in diamond and ta-C coatings assures high mechanical hardness, stiffness, chemical and thermal stability that make them well-suited for harsh tribological conditions involving high-speeds, loads, and temperatures. In particular, unique chemical and mechanical nature of diamond and ta-C surfaces plays an important role in their unusual friction and wear behaviors. As with all other tribomaterials, both diamond and ta-C coatings strongly interact with the chemical species in their surroundings during sliding and hence produce a chemically passive top surface layer which ultimately determines the extent of friction and wear. Thick micro-crystalline diamond films are most preferred for tooling applications, while thinner nano/ultranano-crysalline diamond films are well-suited for mechanical devices ranging from nano- (such as NEMS) to micro- (MEMS and AFM tips) as well as macro-scale devices including mechanical pump seals. The ta-C coatings have lately become indispensable for a variety of automotive applications and are used in very large volumes in tappets, piston pins, rings, and a variety of gears and bearings, especially in the Asian market. This paper is intended to provide a comprehensive overview of the recent developments in tribology of super-hard diamond and DLC (ta-C) films with a special emphasis on their friction and wear mechanisms that are key to their extraordinary tribological performance under harsh tribological conditions. Finally, based on the results of recent studies, the paper will also attempt to highlight what lies ahead for these films in tribology and other demanding industrial applications.},
doi = {10.1016/j.cossms.2018.11.003},
journal = {Current Opinion in Solid State and Materials Science},
number = 6,
volume = 22,
place = {United States},
year = {Tue Nov 20 00:00:00 EST 2018},
month = {Tue Nov 20 00:00:00 EST 2018}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 58 works
Citation information provided by
Web of Science

Save / Share:

Works referenced in this record:

Recent Advances in Superhard Materials
journal, July 2016


Thick stress-free amorphous-tetrahedral carbon films with hardness near that of diamond
journal, December 1997

  • Friedmann, T. A.; Sullivan, J. P.; Knapp, J. A.
  • Applied Physics Letters, Vol. 71, Issue 26
  • DOI: 10.1063/1.120515

Growth Mechanism and Origin of High s p 3 Content in Tetrahedral Amorphous Carbon
journal, April 2018


Tribological Properties of Ultrananocrystalline Diamond Films in Inert and Reactive Tribo-Atmospheres: XPS Depth-Resolved Chemical Analysis
journal, March 2018

  • Rani, Revati; Panda, Kalpataru; Kumar, Niranjan
  • The Journal of Physical Chemistry C, Vol. 122, Issue 15
  • DOI: 10.1021/acs.jpcc.8b00856

Influence of surface passivation on the friction and wear behavior of ultrananocrystalline diamond and tetrahedral amorphous carbon thin films
journal, April 2012


Tribological Properties of Ultrananocrystalline Diamond Films: Mechanochemical Transformation of Sliding Interfaces
journal, January 2018


Friction of Diamond in the Presence of Water Vapor and Hydrogen Gas. Coupling Gas-Phase Lubrication and First-Principles Studies
journal, March 2012

  • De Barros Bouchet, Maria-Isabel; Zilibotti, Giovanna; Matta, Christine
  • The Journal of Physical Chemistry C, Vol. 116, Issue 12
  • DOI: 10.1021/jp211322s

Tribological Performance of Diamond and Diamondlike Carbon Films at Elevated Temperatures
journal, January 1996


An updated overview of diamond-like carbon coating in tribology
journal, September 2014

  • Al Mahmud, K. A. H.; Kalam, M. A.; Masjuki, H. H.
  • Critical Reviews in Solid State and Materials Sciences, Vol. 40, Issue 2
  • DOI: 10.1080/10408436.2014.940441

A review of diamond synthesis by CVD processes
journal, October 2011


Diamond-like amorphous carbon
journal, May 2002


The CVD of Nanodiamond Materials
journal, July 2008

  • Butler, James E.; Sumant, Anirudha V.; Barnard, Amanda S.
  • Chemical Vapor Deposition, Vol. 14, Issue 7-8, p. 145-160
  • DOI: 10.1002/cvde.200700037

Status review of the science and technology of ultrananocrystalline diamond (UNCD™) films and application to multifunctional devices
journal, July 2010


Ultrananocrystalline diamond thin films for MEMS and moving mechanical assembly devices
journal, November 2001


MEMS/NEMS based on mono-, nano-, and ultrananocrystalline diamond films
journal, June 2014

  • Sumant, Anirudha V.; Auciello, Orlando; Liao, Meiyong
  • MRS Bulletin, Vol. 39, Issue 6
  • DOI: 10.1557/mrs.2014.98

Diamond-like carbon for magnetic storage disks
journal, March 2004


Ultrananocrystalline Diamond Film as a Wear-Resistant and Protective Coating for Mechanical Seal Applications
journal, January 2005


Diamond thin films: giving biomedical applications a new shine
journal, September 2017

  • Nistor, P. A.; May, P. W.
  • Journal of The Royal Society Interface, Vol. 14, Issue 134
  • DOI: 10.1098/rsif.2017.0382

History of diamond-like carbon films — From first experiments to worldwide applications
journal, March 2014


Diamond synthesis by chemical vapor deposition: The early years
journal, October 2014


CVD diamond—Research, applications, and challenges
journal, June 2014

  • Nemanich, Robert J.; Carlisle, John A.; Hirata, Atsushi
  • MRS Bulletin, Vol. 39, Issue 6, p. 490-494
  • DOI: 10.1557/mrs.2014.97

A review of nucleation, growth and low temperature synthesis of diamond thin films
journal, January 2007


Very Smooth Ultrananocrystalline Diamond Film Growth by a Novel Pretreatment Technique
journal, February 2016

  • Park, Jong Cheon; Hwang, Sungu; Kim, Tae Gyu
  • Journal of Nanoscience and Nanotechnology, Vol. 16, Issue 2
  • DOI: 10.1166/jnn.2016.11983

Friction and Wear of Diamond in High Vacuum
journal, March 1964


Tribological properties of nanocrystalline diamond films
journal, November 1999


Durability and tribological performance of smooth diamond films produced by Ar-C60 microwave plasmas and by laser polishing
journal, October 1997


Tribological properties of polished diamond films
journal, September 1993

  • Bhushan, Bharat; Subramaniam, Vish V.; Malshe, Ajay
  • Journal of Applied Physics, Vol. 74, Issue 6
  • DOI: 10.1063/1.354421

Friction Properties of Polished cvd Diamond Films Sliding Against Different Metals
journal, February 2016


Tribofilm formation in ultrananocrystalline diamond film
journal, September 2017


Effect of roughness on the friction of diamond on cvd diamond coatings
journal, September 1992


Nanocrystalline diamond
journal, May 2011


Enhanced diamond nucleation on monodispersed nanocrystalline diamond
journal, September 2007


Growth and properties of nanocrystalline diamond films
journal, October 2006

  • Williams, Oliver A.; Nesládek, Miloss
  • physica status solidi (a), Vol. 203, Issue 13, p. 3375-3386
  • DOI: 10.1002/pssa.200671406

Microstructure of ultrananocrystalline diamond films grown by microwave Ar–CH4 plasma chemical vapor deposition with or without added H2
journal, July 2001

  • Jiao, S.; Sumant, A.; Kirk, M. A.
  • Journal of Applied Physics, Vol. 90, Issue 1
  • DOI: 10.1063/1.1377301

Ultrananocrystalline Diamond Properties and Applications in Biomedical Devices
journal, March 2003

  • Carlisle, John A.; Auciello, Orlando
  • The Electrochemical Society Interface, Vol. 12, Issue 1
  • DOI: 10.1149/2.F08031IF

Origin of Ultralow Friction and Wear in Ultrananocrystalline Diamond
journal, June 2008


Friction and Wear Mechanisms of Smooth Diamond Films During Sliding in Air and Dry Nitrogen
journal, January 1997


Tribological properties of ultra nanocrystalline diamond film-effect of sliding counterbodies
journal, September 2012


Crystallographic anisotropy of wear on a polycrystalline diamond surface
journal, June 2006

  • El-Dasher, Bassem S.; Gray, Jeremy J.; Tringe, Joseph W.
  • Applied Physics Letters, Vol. 88, Issue 24
  • DOI: 10.1063/1.2213180

The friction and wear of diamond sliding on diamond
journal, January 1992


Friction of diamond, graphite, and carbon and the influence of surface films
journal, September 1951

  • Bowden, Frank Philip; Young, J. E.
  • Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, Vol. 208, Issue 1095, p. 444-455
  • DOI: 10.1098/rspa.1951.0173

Friction and wear of plasma‐deposited diamond films
journal, October 1993

  • Miyoshi, Kazuhisa; Wu, Richard L. C.; Garscadden, Alan
  • Journal of Applied Physics, Vol. 74, Issue 7
  • DOI: 10.1063/1.354386

Friction and wear properties of diamonds and diamond coatings
journal, December 1991


Environmental conditions to achieve low adhesion and low friction on diamond surfaces
journal, March 2010


Ab initio study on the surface chemistry and nanotribological properties of passivated diamond surfaces
journal, February 2009


Friction of diamond on diamond in ultra-high vacuum and low-pressure environments
journal, October 1992


Humidity-dependent friction mechanism in an ultrananocrystalline diamond film
journal, June 2013


Simulation and experiments on friction and wear of diamond: a material for MEMS and NEMS application
journal, August 1999


Friction Regimes of Water-Lubricated Diamond (111): Role of Interfacial Ether Groups and Tribo-Induced Aromatic Surface Reconstructions
journal, August 2017


Surface chemistry and bonding configuration of ultrananocrystalline diamond surfaces and their effects on nanotribological properties
journal, December 2007


Tribochemical induced wear and ultra-low friction of superhard ta-C coatings
journal, December 2017


Super-low friction of ta-C coating in presence of oleic acid
journal, May 2014


Superlow friction of ta-C lubricated by glycerol: An electron energy loss spectroscopy study
journal, September 2007

  • Joly-Pottuz, L.; Matta, C.; de Barros Bouchet, M. I.
  • Journal of Applied Physics, Vol. 102, Issue 6
  • DOI: 10.1063/1.2779256

Works referencing / citing this record:

Novel spatially coordinated in-situ Raman and nanoscale wear analysis of FCVA-deposited DLC film
journal, June 2019

  • Rouhani, Mehdi; Hobley, Jonathan; Hong, Franklin Chau-Nan
  • AIP Advances, Vol. 9, Issue 6
  • DOI: 10.1063/1.5107474

Machine learning driven simulated deposition of carbon films: From low-density to diamondlike amorphous carbon
journalarticle, January 2020

  • Caro, Ma; Csányi, G.; Laurila, T.
  • American Physical Society (APS)
  • DOI: 10.17863/cam.63652