DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: In situ dynamic compression wave behavior in additively manufactured lattice materials

Abstract

Abstract

Authors:
ORCiD logo [1];  [2];  [1];  [1]
  1. Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
  2. Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
Publication Date:
Research Org.:
Washington State Univ., Pullman, WA (United States); Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)
Sponsoring Org.:
USDOE National Nuclear Security Administration (NNSA), Office of Defense Programs (DP)
OSTI Identifier:
1493748
Alternate Identifier(s):
OSTI ID: 1574634
Report Number(s):
LLNL-JRNL-749958
Journal ID: ISSN 0884-2914; applab
Grant/Contract Number:  
NA0002442; AC52-07NA27344
Resource Type:
Accepted Manuscript
Journal Name:
Journal of Materials Research
Additional Journal Information:
Journal Volume: 34; Journal Issue: 01; Journal ID: ISSN 0884-2914
Publisher:
Materials Research Society
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; Materials science

Citation Formats

Lind, Jonathan, Jensen, Brian J., Barham, Matthew, and Kumar, Mukul. In situ dynamic compression wave behavior in additively manufactured lattice materials. United States: N. p., 2018. Web. doi:10.1557/jmr.2018.351.
Lind, Jonathan, Jensen, Brian J., Barham, Matthew, & Kumar, Mukul. In situ dynamic compression wave behavior in additively manufactured lattice materials. United States. https://doi.org/10.1557/jmr.2018.351
Lind, Jonathan, Jensen, Brian J., Barham, Matthew, and Kumar, Mukul. Wed . "In situ dynamic compression wave behavior in additively manufactured lattice materials". United States. https://doi.org/10.1557/jmr.2018.351. https://www.osti.gov/servlets/purl/1493748.
@article{osti_1493748,
title = {In situ dynamic compression wave behavior in additively manufactured lattice materials},
author = {Lind, Jonathan and Jensen, Brian J. and Barham, Matthew and Kumar, Mukul},
abstractNote = {Abstract},
doi = {10.1557/jmr.2018.351},
journal = {Journal of Materials Research},
number = 01,
volume = 34,
place = {United States},
year = {Wed Oct 17 00:00:00 EDT 2018},
month = {Wed Oct 17 00:00:00 EDT 2018}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 12 works
Citation information provided by
Web of Science

Save / Share:

Works referenced in this record:

Accuracy limits and window corrections for photon Doppler velocimetry
journal, January 2007

  • Jensen, B. J.; Holtkamp, D. B.; Rigg, P. A.
  • Journal of Applied Physics, Vol. 101, Issue 1
  • DOI: 10.1063/1.2407290

High‐Pressure Electrical Behavior and Equation of State of Magnesium Oxide from Shock Wave Measurements
journal, June 1966

  • Ahrens, Thomas J.
  • Journal of Applied Physics, Vol. 37, Issue 7
  • DOI: 10.1063/1.1782080

Precursor decay in 1060 aluminum
journal, October 1975

  • Arvidsson, Torkel E.; Gupta, Y. M.; Duvall, George E.
  • Journal of Applied Physics, Vol. 46, Issue 10
  • DOI: 10.1063/1.321423

Plate-impact loading of cellular structures formed by selective laser melting
journal, February 2014

  • Winter, R. E.; Cotton, M.; Harris, E. J.
  • Modelling and Simulation in Materials Science and Engineering, Vol. 22, Issue 2
  • DOI: 10.1088/0965-0393/22/2/025021

An experimental study on the behaviour under impact loading of metallic cellular materials
journal, April 2005


Accuracy and precision in photonic Doppler velocimetry
journal, May 2010

  • Dolan, D. H.
  • Review of Scientific Instruments, Vol. 81, Issue 5
  • DOI: 10.1063/1.3429257

Laser interferometer for measuring high velocities of any reflecting surface
journal, November 1972

  • Barker, L. M.; Hollenbach, R. E.
  • Journal of Applied Physics, Vol. 43, Issue 11
  • DOI: 10.1063/1.1660986

Dynamic Behavior of Materials
book, September 1994


Compact system for high-speed velocimetry using heterodyne techniques
journal, August 2006

  • Strand, O. T.; Goosman, D. R.; Martinez, C.
  • Review of Scientific Instruments, Vol. 77, Issue 8
  • DOI: 10.1063/1.2336749

Mapping local deformation behavior in single cell metal lattice structures
journal, May 2017


Gas gun shock experiments with single-pulse x-ray phase contrast imaging and diffraction at the Advanced Photon Source
journal, July 2012

  • Luo, S. N.; Jensen, B. J.; Hooks, D. E.
  • Review of Scientific Instruments, Vol. 83, Issue 7
  • DOI: 10.1063/1.4733704

Steady, structured shock waves. Part 1: Thermoelastic materials
journal, January 1988

  • Dunn, J. E.; Fosdick, R. L.
  • Archive for Rational Mechanics and Analysis, Vol. 104, Issue 4
  • DOI: 10.1007/BF00276431

Dynamic Behavior of Engineered Lattice Materials
journal, June 2016

  • Hawreliak, J. A.; Lind, J.; Maddox, B.
  • Scientific Reports, Vol. 6, Issue 1
  • DOI: 10.1038/srep28094

Ultralight, ultrastiff mechanical metamaterials
journal, June 2014


Elastic Precursor Decay in Tantalum
journal, April 1971

  • Gillis, Peter P.; Hoge, Kenneth G.; Wasley, Richard J.
  • Journal of Applied Physics, Vol. 42, Issue 5
  • DOI: 10.1063/1.1660508

Impact system for ultrafast synchrotron experiments
journal, January 2013

  • Jensen, B. J.; Owens, C. T.; Ramos, K. J.
  • Review of Scientific Instruments, Vol. 84, Issue 1
  • DOI: 10.1063/1.4774389

Diamond anvil cell and high-pressure physical investigations
journal, January 1983


Dynamic recrystallization in high-strain, high-strain-rate plastic deformation of copper
journal, September 1994


Phase Diagram of Iron by in Situ X-ray Diffraction: Implications for Earth's Core
journal, December 1995


Tunable Digital Metamaterial for Broadband Vibration Isolation at Low Frequency
journal, September 2016


Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system
journal, December 2012

  • Zheng, Xiaoyu; Deotte, Joshua; Alonso, Matthew P.
  • Review of Scientific Instruments, Vol. 83, Issue 12
  • DOI: 10.1063/1.4769050

A constitutive model for metals applicable at high‐strain rate
journal, March 1980

  • Steinberg, D. J.; Cochran, S. G.; Guinan, M. W.
  • Journal of Applied Physics, Vol. 51, Issue 3
  • DOI: 10.1063/1.327799

Elastic‐Plastic Properties of Iron
journal, February 1963

  • Taylor, John W.; Rice, Melvin H.
  • Journal of Applied Physics, Vol. 34, Issue 2
  • DOI: 10.1063/1.1702614

Effective properties of the octet-truss lattice material
journal, August 2001

  • Deshpande, V. S.; Fleck, N. A.; Ashby, M. F.
  • Journal of the Mechanics and Physics of Solids, Vol. 49, Issue 8
  • DOI: 10.1016/S0022-5096(01)00010-2

Controlling shockwave dynamics using architecture in periodic porous materials
journal, April 2017

  • Branch, Brittany; Ionita, Axinte; Clements, Bradford E.
  • Journal of Applied Physics, Vol. 121, Issue 13
  • DOI: 10.1063/1.4978910

Equation of State Measurements in Liquid Deuterium to 70 GPa
journal, November 2001


Real-time, high-resolution x-ray diffraction measurements on shocked crystals at a synchrotron facility
journal, December 2012

  • Gupta, Y. M.; Turneaure, Stefan J.; Perkins, K.
  • Review of Scientific Instruments, Vol. 83, Issue 12
  • DOI: 10.1063/1.4772577

Equation of State for Nineteen Metallic Elements from Shock‐Wave Measurements to Two Megabars
journal, July 1960

  • McQueen, R. G.; Marsh, S. P.
  • Journal of Applied Physics, Vol. 31, Issue 7
  • DOI: 10.1063/1.1735815

A model for elastic precursor waves in the shock loading of polycrystalline metals
journal, October 1977


Equation of State of Metals from Shock Wave Measurements
journal, March 1955


Compressive Stress-Strain Relations and Shock Hugoniot Curves of Flexible Foams
journal, July 1995

  • Zaretsky, E.; Ben-Dor, G.
  • Journal of Engineering Materials and Technology, Vol. 117, Issue 3
  • DOI: 10.1115/1.2804540

Modeling and experimental verification of an ultra-wide bandgap in 3D phononic crystal
journal, November 2016

  • D'Alessandro, L.; Belloni, E.; Ardito, R.
  • Applied Physics Letters, Vol. 109, Issue 22
  • DOI: 10.1063/1.4971290

X-ray imaging of subsurface dynamics in high-Z materials at the Diamond Light Source
journal, December 2014

  • Eakins, D. E.; Chapman, D. J.
  • Review of Scientific Instruments, Vol. 85, Issue 12
  • DOI: 10.1063/1.4904275

Iterative image deformation methods in PIV
journal, November 2001


Designing Metallic Microlattices for Energy Absorber Applications: Designing Metallic Microlattices
journal, November 2013

  • Schaedler, Tobias A.; Ro, Christopher J.; Sorensen, Adam E.
  • Advanced Engineering Materials, Vol. 16, Issue 3
  • DOI: 10.1002/adem.201300206

Dynamic crushing of honeycombs and features of shock fronts
journal, January 2009


Ultrafast, high resolution, phase contrast imaging of impact response with synchrotron radiation
journal, March 2012

  • Jensen, B. J.; Luo, S. N.; Hooks, D. E.
  • AIP Advances, Vol. 2, Issue 1
  • DOI: 10.1063/1.3696041

ALE3D: An Arbitrary Lagrangian-Eulerian Multi-Physics Code
text, January 2017


Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system
text, January 2012

  • Gemberling, Steven; Lee, Howon; Fang, Nicholas X.
  • Rutgers University
  • DOI: 10.7282/t31838sx

Works referencing / citing this record:

Unraveling the Role of Interfaces on the Spall Failure of Cu/Ta Multilayered Systems
journal, January 2020


Computational Analysis Methods in Atomistic Modeling of Crystals
journal, December 2013