Modelling recrystallization textures driven by intragranular fluctuations implemented in the viscoplastic self-consistent formulation

Zecevic, Miroslav; Lebensohn, Ricardo A.; McCabe, Rodney J.; Knezevic, Marko

doi:10.1016/j.actamat.2018.11.002

Title: Modelling recrystallization textures driven by intragranular fluctuations implemented in the viscoplastic self-consistent formulation

Journal Article · 03 November 2018 · Acta Materialia

DOI: https://doi.org/10.1016/j.actamat.2018.11.002 · OSTI ID:1482008

Zecevic, Miroslav ^[1];

^[2]; McCabe, Rodney J. ^[2]; Knezevic, Marko ^[3]

Univ. of New Hampshire, Durham, NH (United States). Dept. of Mechanical Engineering; Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
Univ. of New Hampshire, Durham, NH (United States). Dept. of Mechanical Engineering

This work presents a recrystallization model driven by intragranular orientation gradients and strain energy fields calculated by means of the viscoplastic self-consistent (VPSC) formulation. The VPSC model is extended for calculation of the coupling between intragranular stress fluctuations with corresponding second moments of lattice spin and misorientation fields in the grains. Access to these quantities allows modelling of transition bands and nucleation kinetics. In the proposed recrystallization model, grain growth is assumed to be proportional to the difference between the stored energy of each grain and that of the effective medium. Recrystallization textures for several cubic metals are simulated, showing good agreement with corresponding experiments. The model reveals the importance of considering appropriate, microstructurally-based and orientation-dependent recrystallization nucleation mechanisms. The recrystallization texture of heavily rolled copper with a strong cube texture component is found to be a consequence of nucleation at transition bands, which is also the cause of the recrystallization textures in compressed iron and drawn copper wire. Finally, in contrast, the recrystallization texture of rolled interstitial-free steel is found to be caused by grain boundary nucleation occurring in grains with the highest strain energy.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Los Alamos National Laboratory (LANL)

Sponsoring Organization:: LANL Laboratory Directed Research and Development (LDRD) Program; National Science Foundation (NSF) (United States); USDOE

Grant/Contract Number:: AC52-06NA25396

OSTI ID:: 1482008

Report Number(s):: LA-UR-18-27030

Journal Information:: Acta Materialia, Journal Name: Acta Materialia Vol. 164; ISSN 1359-6454

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (75)

Iso-work Increment Assumption for Heterogeneous Material Behaviour Modelling Bouaziz, O.; Buessler, P. Advanced Engineering Materials, Vol. 6, Issue 12 https://doi.org/10.1002/adem.200300524	journal	February 2004
Modeling texture change during the static recrystallization of interstitial free steels Kestens, L.; Jonas, J. J. Metallurgical and Materials Transactions A, Vol. 27, Issue 1 https://doi.org/10.1007/BF02647756	journal	January 1996
Static recrystallization simulations by coupling cellular automata and crystal plasticity finite element method using a physically based model for nucleation Han, Fengbo; Tang, Bin; Kou, Hongchao Journal of Materials Science, Vol. 49, Issue 8 https://doi.org/10.1007/s10853-014-8031-8	journal	January 2014
The evolution of annealing textures in 90 Pct drawn copper wire Park, Hyun; Lee, Dong Nyung Metallurgical and Materials Transactions A, Vol. 34, Issue 3 https://doi.org/10.1007/s11661-003-0089-x	journal	March 2003
Substructures and recrystallization of deformed (100)[001]-oriented crystals of high-purity silicon-iron Walter, J. L.; Koch, E. F. Acta Metallurgica, Vol. 11, Issue 8 https://doi.org/10.1016/0001-6160(63)90062-2	journal	August 1963
Factors affecting the rolling recrystallisation textures in F.C.C. metals Dillamore, I. L. Acta Metallurgica, Vol. 12, Issue 9 https://doi.org/10.1016/0001-6160(64)90072-0	journal	September 1964
On the variation of wire texture with stacking fault energy in f.c.c. metals and alloys English, A. T.; Chin, G. Y. Acta Metallurgica, Vol. 13, Issue 9 https://doi.org/10.1016/0001-6160(65)90010-6	journal	September 1965
The structure of deformed aluminium and its recrystallization—investigations with transmission Kossel diffraction Bellier, S. P.; Doherty, R. D. Acta Metallurgica, Vol. 25, Issue 5 https://doi.org/10.1016/0001-6160(77)90192-4	journal	May 1977
Transmission kossel study of the structure of compressed iron and its recrystallization behaviour Inokuti, Y.; Doherty, R. D. Acta Metallurgica, Vol. 26, Issue 1 https://doi.org/10.1016/0001-6160(78)90202-X	journal	January 1978
Recrystallisation mechanisms and the origin of cube texture in copper Ridha, A. A.; Hutchinson, W. B. Acta Metallurgica, Vol. 30, Issue 10 https://doi.org/10.1016/0001-6160(82)90033-5	journal	October 1982
Computer simulation of grain growth-III. Influence of a particle dispersion Srolovitz, D. J.; Anderson, M. P.; Grest, G. S. Acta Metallurgica, Vol. 32, Issue 9 https://doi.org/10.1016/0001-6160(84)90089-0	journal	September 1984
Computer simulation of grain growth—I. Kinetics Anderson, M. P.; Srolovitz, D. J.; Grest, G. S. Acta Metallurgica, Vol. 32, Issue 5 https://doi.org/10.1016/0001-6160(84)90151-2	journal	May 1984
Computer simulation of grain growth—II. Grain size distribution, topology, and local dynamics Srolovitz, D. J.; Anderson, M. P.; Sahni, P. S. Acta Metallurgica, Vol. 32, Issue 5 https://doi.org/10.1016/0001-6160(84)90152-4	journal	May 1984
Investigation of the development of the cold rolling texture in deep drawing steels by ODF-analysis von Schlippenbach, U.; Emren, F.; Lücke, K. Acta Metallurgica, Vol. 34, Issue 7 https://doi.org/10.1016/0001-6160(86)90015-5	journal	July 1986
Investigation of the development of the recrystallization textures in deep drawing steels by ODF analysis Emren, F.; von Schlippenbach, U.; Lücke, K. Acta Metallurgica, Vol. 34, Issue 11 https://doi.org/10.1016/0001-6160(86)90156-2	journal	November 1986
A self consistent approach of the large deformation polycrystal viscoplasticity Molinari, A.; Canova, G. R.; Ahzi, S. Acta Metallurgica, Vol. 35, Issue 12 https://doi.org/10.1016/0001-6160(87)90297-5	journal	December 1987
Recrystallisation textures in iron resulting from nucleation at grain boundaries Hutchinson, W. B. Acta Metallurgica, Vol. 37, Issue 4 https://doi.org/10.1016/0001-6160(89)90101-6	journal	April 1989
Field fluctuations in multicomponent mixtures Bobeth, M.; Diener, G. Journal of the Mechanics and Physics of Solids, Vol. 34, Issue 1 https://doi.org/10.1016/0022-5096(86)90002-5	journal	January 1986
Static elastic and thermoelastic field fluctuations in multiphase composites Bobeth, M.; Diener, G. Journal of the Mechanics and Physics of Solids, Vol. 35, Issue 2 https://doi.org/10.1016/0022-5096(87)90033-0	journal	January 1987
Residual stresses and stored elastic energy of composites and polycrystals Kreher, Wolfgang Journal of the Mechanics and Physics of Solids, Vol. 38, Issue 1 https://doi.org/10.1016/0022-5096(90)90023-W	journal	January 1990
Crystallographic texture evolution in bulk deformation processing of FCC metals Kalidindi, S. R.; Bronkhorst, C. A.; Anand, L. Journal of the Mechanics and Physics of Solids, Vol. 40, Issue 3 https://doi.org/10.1016/0022-5096(92)80003-9	journal	January 1992
A model for texture development dominated by deformation twinning: Application to zirconium alloys Tomé, C. N.; Lebensohn, R. A.; Kocks, U. F. Acta Metallurgica et Materialia, Vol. 39, Issue 11 https://doi.org/10.1016/0956-7151(91)90083-D	journal	November 1991
On the origin of recrystallization textures in aluminium Hjelen, J.; Ørsund, R.; Nes, E. Acta Metallurgica et Materialia, Vol. 39, Issue 7 https://doi.org/10.1016/0956-7151(91)90225-P	journal	July 1991
A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys Lebensohn, R. A.; Tomé, C. N. Acta Metallurgica et Materialia, Vol. 41, Issue 9 https://doi.org/10.1016/0956-7151(93)90130-K	journal	September 1993
Orientation distribution and orientation correlation functions for description of microstructures Pospiech, J.; Lücke, K.; Sztwiertnia, K. Acta Metallurgica et Materialia, Vol. 41, Issue 1 https://doi.org/10.1016/0956-7151(93)90361-U	journal	January 1993
Model calculations of primary recrystallization textures Bunge, H. J.; Köhler, U. Scripta Metallurgica et Materialia, Vol. 27, Issue 11 https://doi.org/10.1016/0956-716X(92)90141-Z	journal	December 1992
An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals Masson, R.; Bornert, M.; Suquet, P. Journal of the Mechanics and Physics of Solids, Vol. 48, Issue 6-7 https://doi.org/10.1016/S0022-5096(99)00071-X	journal	June 2000
Overview of modeling and simulation of recrystallization Rollett, A. D. Progress in Materials Science, Vol. 42, Issue 1-4 https://doi.org/10.1016/S0079-6425(97)00008-X	journal	January 1997
Current issues in recrystallization: a review Doherty, R. D.; Hughes, D. A.; Humphreys, F. J. Materials Science and Engineering: A, Vol. 238, Issue 2 https://doi.org/10.1016/S0921-5093(97)00424-3	journal	November 1997
γ-Fibre recrystallization texture in IF-steel: an investigation on the recrystallization mechanisms Samajdar, I.; Verlinden, B.; Van Houtte, P. Materials Science and Engineering: A, Vol. 238, Issue 2 https://doi.org/10.1016/S0921-5093(97)00455-3	journal	November 1997
Microtexture and anisotropy in wire drawn copper Rajan, Krishna; Petkie, Ronald Materials Science and Engineering: A, Vol. 257, Issue 1 https://doi.org/10.1016/S0921-5093(98)00838-7	journal	November 1998
Dislocation boundaries—the distribution function of disorientation angles Pantleon, W.; Hansen, N. Acta Materialia, Vol. 49, Issue 8 https://doi.org/10.1016/S1359-6454(01)00027-1	journal	May 2001
N-site modeling of a 3D viscoplastic polycrystal using Fast Fourier Transform A. Lebensohn, R. Acta Materialia, Vol. 49, Issue 14 https://doi.org/10.1016/S1359-6454(01)00172-0	journal	August 2001
Modeling of recrystallization textures: Sebald, R.; Gottstein, G. Acta Materialia, Vol. 50, Issue 6 https://doi.org/10.1016/S1359-6454(02)00020-4	journal	April 2002
Neutron diffraction method for stored energy measurement in interstitial free steel Rajmohan, N. Acta Materialia, Vol. 45, Issue 6 https://doi.org/10.1016/S1359-6454(96)00371-0	journal	June 1997
A deformation-based model for recrystallization of anisotropic materials Wenk, H. -R.; Canova, G.; Bréchet, Y. Acta Materialia, Vol. 45, Issue 8 https://doi.org/10.1016/S1359-6454(96)00409-0	journal	August 1997
High angle boundaries formed by grain subdivision mechanisms Hughes, D. A.; Hansen, N. Acta Materialia, Vol. 45, Issue 9 https://doi.org/10.1016/S1359-6454(97)00027-X	journal	September 1997
A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures—II. The effect of second-phase particles Humphreys, F. J. Acta Materialia, Vol. 45, Issue 12 https://doi.org/10.1016/S1359-6454(97)00173-0	journal	December 1997
Modelling deformation and recrystallization textures in calcite Lebensohn, R. A.; Wenk, H. -R.; Tomé, C. N. Acta Materialia, Vol. 46, Issue 8 https://doi.org/10.1016/S1359-6454(97)00477-1	journal	May 1998
Self-consistent polycrystal modelling of dynamic recrystallization during the shear deformation of a Ti IF steel Hildenbrand, A.; Tóth, L. S.; Molinari, A. Acta Materialia, Vol. 47, Issue 2 https://doi.org/10.1016/S1359-6454(98)00384-X	journal	January 1999
On the accuracy of the self-consistent approximation for polycrystals: comparison with full-field numerical simulations Lebensohn, R. A.; Liu, Y.; Ponte Castañeda, P. Acta Materialia, Vol. 52, Issue 18 https://doi.org/10.1016/j.actamat.2004.07.040	journal	October 2004
The effect of strain heterogeneity on the work hardening of polycrystals predicted by mean-field approaches Castelnau, O.; Brenner, R.; Lebensohn, R. Acta Materialia, Vol. 54, Issue 10 https://doi.org/10.1016/j.actamat.2006.02.014	journal	June 2006
Quantitative criterion for recrystallization nucleation in single-phase alloys: Prediction of critical strains and incubation times Zurob, H.; Brechet, Y.; Dunlop, J. Acta Materialia, Vol. 54, Issue 15 https://doi.org/10.1016/j.actamat.2006.04.028	journal	September 2006
Orientation image-based micromechanical modelling of subgrain texture evolution in polycrystalline copper Lebensohn, Ricardo A.; Brenner, Renald; Castelnau, Olivier Acta Materialia, Vol. 56, Issue 15 https://doi.org/10.1016/j.actamat.2008.04.016	journal	September 2008
Modelling discontinuous dynamic recrystallization using a physically based model for nucleation Cram, D. G.; Zurob, H. S.; Brechet, Y. J. M. Acta Materialia, Vol. 57, Issue 17 https://doi.org/10.1016/j.actamat.2009.07.024	journal	October 2009
Average intragranular misorientation trends in polycrystalline materials predicted by a viscoplastic self-consistent approach Lebensohn, Ricardo A.; Zecevic, Miroslav; Knezevic, Marko Acta Materialia, Vol. 104 https://doi.org/10.1016/j.actamat.2015.10.035	journal	February 2016
Predicting intragranular misorientation distributions in polycrystalline metals using the viscoplastic self-consistent formulation Zecevic, Miroslav; Pantleon, Wolfgang; Lebensohn, Ricardo A. Acta Materialia, Vol. 140 https://doi.org/10.1016/j.actamat.2017.08.056	journal	November 2017
Explicit modeling of double twinning in AZ31 using crystal plasticity finite elements for predicting the mechanical fields for twin variant selection and fracture analyses Ardeljan, Milan; Knezevic, Marko Acta Materialia, Vol. 157 https://doi.org/10.1016/j.actamat.2018.07.045	journal	September 2018
Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models Knezevic, Marko; Drach, Borys; Ardeljan, Milan Computer Methods in Applied Mechanics and Engineering, Vol. 277 https://doi.org/10.1016/j.cma.2014.05.003	journal	August 2014
Anisotropic modeling of structural components using embedded crystal plasticity constructive laws within finite elements Knezevic, Marko; Crapps, Justin; Beyerlein, Irene J. International Journal of Mechanical Sciences, Vol. 105 https://doi.org/10.1016/j.ijmecsci.2015.11.021	journal	January 2016
A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: Application to AA6022-T4 Zecevic, Milovan; Knezevic, Marko International Journal of Plasticity, Vol. 72 https://doi.org/10.1016/j.ijplas.2015.05.018	journal	September 2015
A study of microstructure-driven strain localizations in two-phase polycrystalline HCP/BCC composites using a multi-scale model Ardeljan, Milan; Knezevic, Marko; Nizolek, Thomas International Journal of Plasticity, Vol. 74 https://doi.org/10.1016/j.ijplas.2015.06.003	journal	November 2015
Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets Zecevic, Milovan; Knezevic, Marko International Journal of Plasticity, Vol. 105 https://doi.org/10.1016/j.ijplas.2018.02.007	journal	June 2018
A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites Ardeljan, Milan; Beyerlein, Irene J.; Knezevic, Marko Journal of the Mechanics and Physics of Solids, Vol. 66 https://doi.org/10.1016/j.jmps.2014.01.006	journal	May 2014
Microstructure effects on the recrystallization of low-symmetry alpha-uranium McCabe, R. J.; Richards, A. W.; Coughlin, D. R. Journal of Nuclear Materials, Vol. 465 https://doi.org/10.1016/j.jnucmat.2015.04.055	journal	October 2015
Monte Carlo modeling of recrystallization processes in α-uranium Steiner, M. A.; McCabe, R. J.; Garlea, E. Journal of Nuclear Materials, Vol. 492 https://doi.org/10.1016/j.jnucmat.2017.04.026	journal	August 2017
Recrystallization textures in fcc materials: A simulation based on micromechanical modeling data Bolmaro, R. E.; Roatta, A.; Fourty, A. L. Scripta Materialia, Vol. 53, Issue 2 https://doi.org/10.1016/j.scriptamat.2005.04.003	journal	July 2005
On the widths of orientation gradient zones adjacent to grain boundaries Mishra, S. K.; Pant, P.; Narasimhan, K. Scripta Materialia, Vol. 61, Issue 3 https://doi.org/10.1016/j.scriptamat.2009.03.062	journal	August 2009
Modeling dynamic recrystallization of olivine aggregates deformed in simple shear Wenk, H. -R.; Tomé, C. N. Journal of Geophysical Research: Solid Earth, Vol. 104, Issue B11 https://doi.org/10.1029/1999JB900261	journal	November 1999
Strain Induced Grain Boundary Migration in High Purity Aluminum Beck, Paul A.; Sperry, Philip R. Journal of Applied Physics, Vol. 21, Issue 2 https://doi.org/10.1063/1.1699614	journal	February 1950
Introduction of a scalable three-dimensional cellular automaton with a probabilistic switching rule for the discrete mesoscale simulation of recrystallization phenomena Raabe, Dierk Philosophical Magazine A, Vol. 79, Issue 10 https://doi.org/10.1080/01418619908214288	journal	October 1999
Self-consistent modelling of the mechanical behaviour of viscoplastic polycrystals incorporating intragranular field fluctuations Lebensohn, R. A.; Tomé, C. N.; CastaÑeda, P. Ponte Philosophical Magazine, Vol. 87, Issue 28 https://doi.org/10.1080/14786430701432619	journal	August 2007
The determination of the elastic field of an ellipsoidal inclusion, and related problems Eshelby, John Douglas Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, Vol. 241, Issue 1226, p. 376-396 https://doi.org/10.1098/rspa.1957.0133	journal	August 1957
Development of microstructure in FCC metals during cold work Hansen, Niels; Jensen, Dorte Juul Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, Vol. 357, Issue 1756 https://doi.org/10.1098/rsta.1999.0384	journal	June 1999
Cellular Automata in Materials Science with Particular Reference to Recrystallization Simulation Raabe, Dierk Annual Review of Materials Research, Vol. 32, Issue 1 https://doi.org/10.1146/annurev.matsci.32.090601.152855	journal	August 2002
Rolling and Recrystallization Textures of BCC Steels Lücke, K.; Hölscher, M. Textures and Microstructures, Vol. 14 https://doi.org/10.1155/TSM.14-18.585	journal	January 1991
A Simulation of Recrystallization Textures of Al-Alloys With Consideration of the Probabilities of Nucleation and Growth Engler, O. Textures and Microstructures, Vol. 32, Issue 1-4 https://doi.org/10.1155/TSM.32.197	journal	January 1999
Deformation structures and textures in cold-rolled 70:30 brass Duggan, B. J.; Hatherly, M.; Hutchinson, W. B. Metal Science, Vol. 12, Issue 8 https://doi.org/10.1179/030634578790433909	journal	August 1978
Contribution of shear banding to origin of Goss texture in silicon iron Haratani, T.; Hutchinson, W. B.; Dillamore, I. L. Metal Science, Vol. 18, Issue 2 https://doi.org/10.1179/030634584790420258	journal	February 1984
Retrieving orientation correlations in deformation structures from orientation maps Pantleon, W. Materials Science and Technology, Vol. 21, Issue 12 https://doi.org/10.1179/174328405X71657	journal	December 2005
Cold rolling and annealing textures in low carbon and extra low carbon steels Ray, R. K.; Jonas, J. J.; Hook, R. E. International Materials Reviews, Vol. 39, Issue 4 https://doi.org/10.1179/imr.1994.39.4.129	journal	January 1994
The Mechanisms of Recrystallization in Cubic Metals with Particular Reference to Their Orientation-Dependence Dillamore, I. L.; Katoh, H. Metal Science, Vol. 8, Issue 1 https://doi.org/10.1179/msc.1974.8.1.73	journal	January 1974
Nucleation and growth during recrystallisation of aluminium alloys investigated by local texture analysis Engler, O. Materials Science and Technology, Vol. 12, Issue 10 https://doi.org/10.1179/mst.1996.12.10.859	journal	October 1996
Modeling Texture Change during the Recrystallization of an IF Steel. Urabe, Toshiaki; Jonas, J. J. ISIJ International, Vol. 34, Issue 5 https://doi.org/10.2355/isijinternational.34.435	journal	January 1994
Approaches to Modeling of Recrystallization Hallberg, Håkan Metals, Vol. 1, Issue 1 https://doi.org/10.3390/met1010016	journal	October 2011

Cited By (3)

On a modified Becker–Döring model for two-phase materials Blesgen, Thomas; Amendola, Ada; Fraternali, Fernando Continuum Mechanics and Thermodynamics, Vol. 32, Issue 3 https://doi.org/10.1007/s00161-019-00774-2	journal	April 2019
Tooling design–related spatial deformation behaviors and crystallographic texture evolution of high-strength Ti-3Al-2.5V tube in cold pilgering Li, H.; Wei, D.; Zhang, H. Q. The International Journal of Advanced Manufacturing Technology, Vol. 104, Issue 5-8 https://doi.org/10.1007/s00170-019-04151-w	journal	July 2019
Characterization of Texture Evolution during Recrystallization by Laser-Induced Transient Thermal Grating Method Yin, Anmin; Xu, Xiaodong; Zhang, Shuyi Metals, Vol. 9, Issue 3 https://doi.org/10.3390/met9030288	journal	March 2019

Similar Records

Predicting intragranular misorientation distributions in polycrystalline metals using the viscoplastic self-consistent formulation

Journal Article · 2017 · Acta Materialia · OSTI ID:1479989

Zecevic, Miroslav; Pantleon, Wolfgang; Lebensohn, Ricardo A.; +2 more

Modeling of intragranular misorientation and grain fragmentation in polycrystalline materials using the viscoplastic self-consistent formulation

Journal Article · 2018 · International Journal of Plasticity · OSTI ID:1457281

Zecevic, Miroslav; Lebensohn, Ricardo A.; McCabe, Rodney J.; +1 more

Average intragranular misorientation trends in polycrystalline materials predicted by a viscoplastic self-consistent approach

Journal Article · 2015 · Acta Materialia · OSTI ID:1248968

Lebensohn, Ricardo A.; Zecevic, Miroslav; Knezevic, Marko; +1 more

Related Subjects

36 MATERIALS SCIENCE
crystal plasticity
microstructures
numerical algorithms
recrystallization
texture

Title: Modelling recrystallization textures driven by intragranular fluctuations implemented in the viscoplastic self-consistent formulation

Citation Formats

References (75)

Cited By (3)

Similar Records

Related Subjects