Analysis of thermal history effects on mechanical anisotropy of 3D-printed polymer matrix composites via in situ X-ray tomography
- Authors:
-
[1]
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
- Argonne National Lab. (ANL), Lemont, IL (United States)
- Arizona State Univ., Tempe, AZ (United States)
- Publication Date:
- Research Org.:
- Argonne National Laboratory (ANL), Argonne, IL (United States); Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
- Sponsoring Org.:
- USDOE Office of Science (SC), Basic Energy Sciences (BES); USDOE National Nuclear Security Administration (NNSA), Office of Defense Programs (DP)
- OSTI Identifier:
- 1480992
- Alternate Identifier(s):
- OSTI ID: 1501799
- Report Number(s):
- LA-UR-16-24541
Journal ID: ISSN 0022-2461; 146295
- Grant/Contract Number:
- AC02-06CH11357; 89233218CNA000001
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Journal of Materials Science
- Additional Journal Information:
- Journal Volume: 52; Journal Issue: 20; Journal ID: ISSN 0022-2461
- Publisher:
- Springer
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; additive manufacturing polymers; composites; mechanical characterization; strain measurement; tomography
Citation Formats
Mertens, J. C. E., Henderson, K., Cordes, N. L., Pacheco, R., Xiao, X., Williams, J. J., Chawla, N., and Patterson, B. M. Analysis of thermal history effects on mechanical anisotropy of 3D-printed polymer matrix composites via in situ X-ray tomography. United States: N. p., 2017.
Web. doi:10.1007/s10853-017-1339-4.
Mertens, J. C. E., Henderson, K., Cordes, N. L., Pacheco, R., Xiao, X., Williams, J. J., Chawla, N., & Patterson, B. M. Analysis of thermal history effects on mechanical anisotropy of 3D-printed polymer matrix composites via in situ X-ray tomography. United States. https://doi.org/10.1007/s10853-017-1339-4
Mertens, J. C. E., Henderson, K., Cordes, N. L., Pacheco, R., Xiao, X., Williams, J. J., Chawla, N., and Patterson, B. M. Thu .
"Analysis of thermal history effects on mechanical anisotropy of 3D-printed polymer matrix composites via in situ X-ray tomography". United States. https://doi.org/10.1007/s10853-017-1339-4. https://www.osti.gov/servlets/purl/1480992.
@article{osti_1480992,
title = {Analysis of thermal history effects on mechanical anisotropy of 3D-printed polymer matrix composites via in situ X-ray tomography},
author = {Mertens, J. C. E. and Henderson, K. and Cordes, N. L. and Pacheco, R. and Xiao, X. and Williams, J. J. and Chawla, N. and Patterson, B. M.},
abstractNote = {},
doi = {10.1007/s10853-017-1339-4},
journal = {Journal of Materials Science},
number = 20,
volume = 52,
place = {United States},
year = {Thu Jul 06 00:00:00 EDT 2017},
month = {Thu Jul 06 00:00:00 EDT 2017}
}
Free Publicly Available Full Text
Publisher's Version of Record
Other availability
Search WorldCat to find libraries that may hold this journal
Cited by: 13 works
Citation information provided by
Web of Science
Web of Science
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
Anisotropic material properties of fused deposition modeling ABS
journal, October 2002
- Ahn, Sung‐Hoon; Montero, Michael; Odell, Dan
- Rapid Prototyping Journal, Vol. 8, Issue 4
Methods and applications of digital volume correlation
journal, August 2008
- Bay, B. K.
- The Journal of Strain Analysis for Engineering Design, Vol. 43, Issue 8
Optimal Design for Additive Manufacturing: Opportunities and Challenges
conference, June 2012
- Doubrovski, Zjenja; Verlinden, Jouke C.; Geraedts, Jo M. P.
- ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Volume 9: 23rd International Conference on Design Theory and Methodology; 16th Design for Manufacturing and the Life Cycle Conference
TomoPy: a framework for the analysis of synchrotron tomographic data
journal, August 2014
- Gürsoy, Dogˇa; De Carlo, Francesco; Xiao, Xianghui
- Journal of Synchrotron Radiation, Vol. 21, Issue 5
Simultaneous phase and amplitude extraction from a single defocused image of a homogeneous object
journal, April 2002
- Paganin, D.; Mayo, S. C.; Gureyev, T. E.
- Journal of Microscopy, Vol. 206, Issue 1
Digital Design Process and Additive Manufacturing of a Configurable Product
journal, March 2013
- Heidi, Piili; Thomas, Widmaier; Ari, Happonen
- Advanced Science Letters, Vol. 19, Issue 3
Selective Laser Melting: A manufacturing technology for the future?
journal, April 2012
- Bremen, Sebastian; Meiners, Wilhelm; Diatlov, Andrei
- Laser Technik Journal, Vol. 9, Issue 2
An Analysis Of Tensile Test Results to Assess the Innovation Risk for an Additive Manufacturing Technology
journal, March 2015
- Adamczak, Stanisław; Bochnia, Jerzy; Kaczmarska, Bożena
- Metrology and Measurement Systems, Vol. 22, Issue 1
In situ X-ray synchrotron tomographic imaging during the compression of hyper-elastic polymeric materials
journal, September 2015
- Patterson, Brian M.; Cordes, Nikolaus L.; Henderson, Kevin
- Journal of Materials Science, Vol. 51, Issue 1
Economics of additive manufacturing for end-usable metal parts
journal, February 2012
- Atzeni, Eleonora; Salmi, Alessandro
- The International Journal of Advanced Manufacturing Technology, Vol. 62, Issue 9-12
Strain rate effects on the thermomechanical behavior of polymers
journal, May 2001
- Li, Zhouhua; Lambros, John
- International Journal of Solids and Structures, Vol. 38, Issue 20
Additive Manufacturing: Making Imagination the Major Limitation
journal, March 2014
- Zhai, Yuwei; Lados, Diana A.; LaGoy, Jane L.
- JOM, Vol. 66, Issue 5
Additive Manufacturing Technologies
book, January 2010
- Gibson, Ian; Rosen, David W.; Stucker, Brent
- Springer New York, NY
Implications on design of rapid manufacturing
journal, January 2003
- Hague, R.; Campbell, I.; Dickens, P.
- Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 217, Issue 1
Characterization of Damage Evolution in SiC Particle Reinforced Al Alloy Matrix Composites by In-Situ X-Ray Synchrotron Tomography
journal, May 2011
- Williams, J. J.; Chapman, N. C.; Jakkali, V.
- Metallurgical and Materials Transactions A, Vol. 42, Issue 10
Stripe and ring artifact removal with combined wavelet—Fourier filtering
journal, January 2009
- Münch, Beat; Trtik, Pavel; Marone, Federica
- Optics Express, Vol. 17, Issue 10
Micro porosity analysis in additive manufactured NiTi parts using micro computed tomography and electron microscopy
journal, January 2016
- Khademzadeh, Saeed; Carmignato, Simone; Parvin, Nader
- Materials & Design, Vol. 90
Failure modes in high strength and stiffness to weight scaffolds produced by Selective Laser Melting
journal, February 2015
- Sercombe, Timothy B.; Xu, Xiaoxue; Challis, V. J.
- Materials & Design, Vol. 67
Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 718
journal, March 2016
- Smith, Derek H.; Bicknell, Jonathan; Jorgensen, Luke
- Materials Characterization, Vol. 113
Optimum part deposition orientation in fused deposition modeling
journal, May 2004
- Thrimurthulu, K.; Pandey, Pulak M.; Venkata Reddy, N.
- International Journal of Machine Tools and Manufacture, Vol. 44, Issue 6
Digital volume correlation: Three-dimensional strain mapping using X-ray tomography
journal, September 1999
- Bay, B. K.; Smith, T. S.; Fyhrie, D. P.
- Experimental Mechanics, Vol. 39, Issue 3
Developments in synchrotron x-ray computed microtomography at the National Synchrotron Light Source
conference, September 1999
- Dowd, Betsy A.; Campbell, Graham H.; Marr, Robert B.
- SPIE's International Symposium on Optical Science, Engineering, and Instrumentation, SPIE Proceedings
Progress in Additive Manufacturing and Rapid Prototyping
journal, January 1998
- Kruth, J. -P.; Leu, M. C.; Nakagawa, T.
- CIRP Annals, Vol. 47, Issue 2
Overview of Current Additive Manufacturing Technologies and Selected Applications
journal, September 2012
- Horn, Timothy J.; Harrysson, Ola L. A.
- Science Progress, Vol. 95, Issue 3
Morphological and Performance Measures of Polyurethane Foams Using X-Ray CT and Mechanical Testing
journal, May 2014
- Patterson, Brian M.; Henderson, Kevin; Gilbertson, Robert D.
- Microscopy and Microanalysis, Vol. 20, Issue 4
Effect of temperature and strain rate on the tensile deformation of polyamide 6
journal, May 2007
- Shan, Gui-Fang; Yang, Wei; Yang, Ming-bo
- Polymer, Vol. 48, Issue 10
Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
journal, April 2015
- Carroll, Beth E.; Palmer, Todd A.; Beese, Allison M.
- Acta Materialia, Vol. 87
In situ experimental techniques to study the mechanical behavior of materials using X-ray synchrotron tomography
journal, April 2014
- Singh, Sudhanshu S.; Williams, Jason J.; Hruby, Peter
- Integrating Materials and Manufacturing Innovation, Vol. 3, Issue 1
Metal Additive Manufacturing: A Review
journal, April 2014
- Frazier, William E.
- Journal of Materials Engineering and Performance, Vol. 23, Issue 6
On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
journal, March 2013
- Leuders, S.; Thöne, M.; Riemer, A.
- International Journal of Fatigue, Vol. 48
Digital image correlation analysis of local strain fields on Ti6Al4V manufactured by electron beam melting
journal, November 2014
- Karlsson, Joakim; Sjögren, Torsten; Snis, Anders
- Materials Science and Engineering: A, Vol. 618
Characterization of an Aluminum Alloy Hemispherical Shell Fabricated via Direct Metal Laser Melting
journal, January 2016
- Holesinger, T. G.; Carpenter, J. S.; Lienert, T. J.
- JOM, Vol. 68, Issue 3
Effect of reducible properties of temperature, rate of strain, and filler content on the tensile yield stress of nylon 6 composites filled with ultrafine particles
journal, August 1983
- Sumita, Masao; Shizuma, Tadao; Miyasaka, Keizo
- Journal of Macromolecular Science, Part B, Vol. 22, Issue 4
Recycling of polyamide 12 based powders in the laser sintering process
journal, May 2009
- Dotchev, Krassimir; Yusoff, Wan
- Rapid Prototyping Journal, Vol. 15, Issue 3
Significance of pore percolation to drive anisotropic effects of 3D printed polymers revealed with X-ray μ-tomography and finite element computation
journal, December 2015
- Guessasma, Sofiane; Belhabib, Sofiane; Nouri, Hedi
- Polymer, Vol. 81
Fatigue Behavior of Ti-6Al-4V Alloy Additively Manufactured by Laser Engineered Net Shaping
conference, January 2015
- Sterling, Amanda J.; Torries, Brian; Seely, Denver
- 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
Works referencing / citing this record:
Microstructural characterization and mechanical property prediction of a polymer matrix composite by X-ray synchrotron tomography and spatial correlation functions
journal, September 2019
- Singh, Somya; Li, Hechao; Singh, Sudhanshu S.
- SN Applied Sciences, Vol. 1, Issue 10