Rapid route to efficient, scalable, and robust perovskite photovoltaics in air

Hilt, Florian; Hovish, Michael Q.; Rolston, Nicholas; Brüning, Karsten; Tassone, Christopher J.; Dauskardt, Reinhold H.

doi:10.1039/c8ee01065j

Title: Rapid route to efficient, scalable, and robust perovskite photovoltaics in air

Abstract

RSPP is a unique up-scalable method to produce high quality photoactive perovskite in seconds in open-air.

Authors:

^[1];

^[2];

^[1]

Stanford Univ., Stanford, CA (United States)
SLAC National Accelerator Lab., Menlo Park, CA (United States)

Publication Date:: Tue May 29 00:00:00 EDT 2018

Research Org.:: SLAC National Accelerator Laboratory (SLAC), Menlo Park, CA (United States)

Sponsoring Org.:: USDOE

OSTI Identifier:: 1476170

Alternate Identifier(s):: OSTI ID: 1440371; OSTI ID: 1491405

Grant/Contract Number:: AC02-76SF00515; EE0004946; DGE-1656518; ECCS-1542152

Resource Type:: Accepted Manuscript

Journal Name:: Energy & Environmental Science

Additional Journal Information:: Journal Volume: 11; Journal Issue: 8; Journal ID: ISSN 1754-5692

Publisher:: Royal Society of Chemistry

Country of Publication:: United States

Language:: English

Subject:: 14 SOLAR ENERGY

Citation Formats


                    Hilt, Florian, Hovish, Michael Q., Rolston, Nicholas, Brüning, Karsten, Tassone, Christopher J., and Dauskardt, Reinhold H. Rapid route to efficient, scalable, and robust perovskite photovoltaics in air.  United States: N. p., 2018. 
Web.  doi:10.1039/c8ee01065j.

Copy to clipboard


                    Hilt, Florian, Hovish, Michael Q., Rolston, Nicholas, Brüning, Karsten, Tassone, Christopher J., & Dauskardt, Reinhold H. Rapid route to efficient, scalable, and robust perovskite photovoltaics in air.  United States.  https://doi.org/10.1039/c8ee01065j

Copy to clipboard


                    Hilt, Florian, Hovish, Michael Q., Rolston, Nicholas, Brüning, Karsten, Tassone, Christopher J., and Dauskardt, Reinhold H. Tue .  
"Rapid route to efficient, scalable, and robust perovskite photovoltaics in air".  United States.  https://doi.org/10.1039/c8ee01065j.  https://www.osti.gov/servlets/purl/1476170.

Copy to clipboard


                    
@article{osti_1476170,

  title        = {Rapid route to efficient, scalable, and robust perovskite photovoltaics in air},

  author       = {Hilt, Florian and Hovish, Michael Q. and Rolston, Nicholas and Brüning, Karsten and Tassone, Christopher J. and Dauskardt, Reinhold H.},

  abstractNote = {RSPP is a unique up-scalable method to produce high quality photoactive perovskite in seconds in open-air.},

  doi          = {10.1039/c8ee01065j},

  journal      = {Energy & Environmental Science},

  number       = 8,

  volume       = 11,

  place        = {United States},

  year         = {Tue May 29 00:00:00 EDT 2018},

  month        = {Tue May 29 00:00:00 EDT 2018}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (DOE)

Publisher's Version of Record

https://doi.org/10.1039/c8ee01065j

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 34 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Recent Advances in the Inverted Planar Structure of Perovskite Solar Cells
journal, December 2015

Meng, Lei; You, Jingbi; Guo, Tzung-Fang
Accounts of Chemical Research, Vol. 49, Issue 1
DOI: 10.1021/acs.accounts.5b00404

In situ growth of epitaxial lead iodide films composed of hexagonal single crystals
journal, January 2005

Zheng, Zhi; Liu, Airuo; Wang, Shumin
Journal of Materials Chemistry, Vol. 15, Issue 42
DOI: 10.1039/b510077a

The emergence of perovskite solar cells
journal, July 2014

Green, Martin A.; Ho-Baillie, Anita; Snaith, Henry J.
Nature Photonics, Vol. 8, Issue 7, p. 506-514
DOI: 10.1038/nphoton.2014.134

Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
journal, June 2017

Yang, Woon Seok; Park, Byung-Wook; Jung, Eui Hyuk
Science, Vol. 356, Issue 6345
DOI: 10.1126/science.aan2301

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
journal, May 2009

Kojima, Akihiro; Teshima, Kenjiro; Shirai, Yasuo
Journal of the American Chemical Society, Vol. 131, Issue 17, p. 6050-6051
DOI: 10.1021/ja809598r

High-Performance Flexible Perovskite Solar Cells by Using a Combination of Ultrasonic Spray-Coating and Low Thermal Budget Photonic Curing
journal, May 2015

Das, Sanjib; Yang, Bin; Gu, Gong
ACS Photonics, Vol. 2, Issue 6
DOI: 10.1021/acsphotonics.5b00119

Influence of Air Annealing on High Efficiency Planar Structure Perovskite Solar Cells
journal, February 2015

Raga, Sonia R.; Jung, Min-Cherl; Lee, Michael V.
Chemistry of Materials, Vol. 27, Issue 5
DOI: 10.1021/cm5041997

Moving liquids with light: Photoelectrowetting on semiconductors
journal, December 2011

Arscott, Steve
Scientific Reports, Vol. 1, Issue 1
DOI: 10.1038/srep00184

Atomically thin two-dimensional organic-inorganic hybrid perovskites
journal, September 2015

Dou, L.; Wong, A. B.; Yu, Y.
Science, Vol. 349, Issue 6255
DOI: 10.1126/science.aac7660

Crystallization Dynamics of Organolead Halide Perovskite by Real-Time X-ray Diffraction
journal, July 2015

Miyadera, Tetsuhiko; Shibata, Yosei; Koganezawa, Tomoyuki
Nano Letters, Vol. 15, Issue 8
DOI: 10.1021/acs.nanolett.5b02402

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency
journal, January 2016

Saliba, Michael; Matsui, Taisuke; Seo, Ji-Youn
Energy & Environmental Science, Vol. 9, Issue 6
DOI: 10.1039/C5EE03874J

Optical and structural properties of PbI2 thin films
journal, July 2007

Condeles, J. F.; Ando, R. A.; Mulato, M.
Journal of Materials Science, Vol. 43, Issue 2
DOI: 10.1007/s10853-007-1854-9

Mechanical integrity of solution-processed perovskite solar cells
journal, December 2016

Rolston, Nicholas; Watson, Brian L.; Bailie, Colin D.
Extreme Mechanics Letters, Vol. 9
DOI: 10.1016/j.eml.2016.06.006

Plasma–liquid interactions: a review and roadmap
journal, September 2016

Bruggeman, P. J.; Kushner, M. J.; Locke, B. R.
Plasma Sources Science and Technology, Vol. 25, Issue 5
DOI: 10.1088/0963-0252/25/5/053002

The effect of illumination on the formation of metal halide perovskite films
journal, April 2017

Ummadisingu, Amita; Steier, Ludmilla; Seo, Ji-Youn
Nature, Vol. 545, Issue 7653
DOI: 10.1038/nature22072

Scaffold-reinforced perovskite compound solar cells
journal, January 2017

Watson, Brian L.; Rolston, Nicholas; Printz, Adam D.
Energy & Environmental Science, Vol. 10, Issue 12
DOI: 10.1039/C7EE02185B

Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells
journal, July 2015

Bi, Cheng; Wang, Qi; Shao, Yuchuan
Nature Communications, Vol. 6, Issue 1
DOI: 10.1038/ncomms8747

Toward Large Scale Roll-to-Roll Production of Fully Printed Perovskite Solar Cells
journal, January 2015

Hwang, Kyeongil; Jung, Yen-Sook; Heo, Youn-Jung
Advanced Materials, Vol. 27, Issue 7
DOI: 10.1002/adma.201404598

Under the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications
journal, June 2015

Chen, Qi; De Marco, Nicholas; Yang, Yang (Michael)
Nano Today, Vol. 10, Issue 3
DOI: 10.1016/j.nantod.2015.04.009

Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
journal, October 2015

You, Jingbi; Meng, Lei; Song, Tze-Bin
Nature Nanotechnology, Vol. 11, Issue 1
DOI: 10.1038/nnano.2015.230

Investigation of CH ₃ NH ₃ PbI ₃ Degradation Rates and Mechanisms in Controlled Humidity Environments Using in Situ Techniques
journal, January 2015

Yang, Jinli; Siempelkamp, Braden D.; Liu, Dianyi
ACS Nano, Vol. 9, Issue 2
DOI: 10.1021/nn506864k

Degradation observations of encapsulated planar CH ₃ NH ₃ PbI ₃ perovskite solar cells at high temperatures and humidity
journal, January 2015

Han, Yu; Meyer, Steffen; Dkhissi, Yasmina
Journal of Materials Chemistry A, Vol. 3, Issue 15
DOI: 10.1039/C5TA00358J

Nucleation and Crystal Growth of Organic–Inorganic Lead Halide Perovskites under Different Relative Humidity
journal, April 2015

Gao, Hao; Bao, Chunxiong; Li, Faming
ACS Applied Materials & Interfaces, Vol. 7, Issue 17
DOI: 10.1021/acsami.5b00895

Formamidinium and Cesium Hybridization for Photo- and Moisture-Stable Perovskite Solar Cell
journal, September 2015

Lee, Jin-Wook; Kim, Deok-Hwan; Kim, Hui-Seon
Advanced Energy Materials, Vol. 5, Issue 20
DOI: 10.1002/aenm.201501310

Improved stability and efficiency of perovskite solar cells with submicron flexible barrier films deposited in air
journal, January 2017

Rolston, Nicholas; Printz, Adam D.; Hilt, Florian
Journal of Materials Chemistry A, Vol. 5, Issue 44
DOI: 10.1039/C7TA09178H

A Closer Look into Two-Step Perovskite Conversion with X-ray Scattering
journal, March 2015

Schlipf, Johannes; Docampo, Pablo; Schaffer, Christoph J.
The Journal of Physical Chemistry Letters, Vol. 6, Issue 7
DOI: 10.1021/acs.jpclett.5b00329

The light and shade of perovskite solar cells
journal, August 2014

Grätzel, Michael
Nature Materials, Vol. 13, Issue 9
DOI: 10.1038/nmat4065

Transformation of the Excited State and Photovoltaic Efficiency of CH ₃ NH ₃ PbI ₃ Perovskite upon Controlled Exposure to Humidified Air
journal, January 2015

Christians, Jeffrey A.; Miranda Herrera, Pierre A.; Kamat, Prashant V.
Journal of the American Chemical Society, Vol. 137, Issue 4
DOI: 10.1021/ja511132a

High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
journal, January 2015

Nie, W.; Tsai, H.; Asadpour, R.
Science, Vol. 347, Issue 6221, p. 522-525
DOI: 10.1126/science.aaa0472

Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells
text, January 2015

Yongbo, Yuan,; Yuchuan, Shao,; Zhengguo, Xiao,
The University of North Carolina at Chapel Hill University Libraries
DOI: 10.17615/h36r-a084

A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules
journal, September 2017

Chen, Han; Ye, Fei; Tang, Wentao
Nature, Vol. 550, Issue 7674
DOI: 10.1038/nature23877

Hybrid Organic-Inorganic Perovskites (HOIPs): Opportunities and Challenges
journal, July 2015

Berry, Joseph; Buonassisi, Tonio; Egger, David A.
Advanced Materials, Vol. 27, Issue 35
DOI: 10.1002/adma.201502294

Identification and characterization of the intermediate phase in hybrid organic–inorganic MAPbI ₃ perovskite
journal, January 2016

Guo, Xin; McCleese, Christopher; Kolodziej, Charles
Dalton Transactions, Vol. 45, Issue 9
DOI: 10.1039/C5DT04420K

Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
journal, October 2013

Snaith, Henry J.
The Journal of Physical Chemistry Letters, Vol. 4, Issue 21, p. 3623-3630
DOI: 10.1021/jz4020162

Crystallization Kinetics of Lead Halide Perovskite Film Monitored by In Situ Terahertz Spectroscopy
journal, January 2017

Park, S. J.; Kim, A. R.; Hong, J. T.
The Journal of Physical Chemistry Letters, Vol. 8, Issue 2
DOI: 10.1021/acs.jpclett.6b02691

An augmented double cantilever beam model for studying crack propagation and arrest
journal, March 1973

Kanninen, M. F.
International Journal of Fracture, Vol. 9, Issue 1
DOI: 10.1007/BF00035958

Works referencing / citing this record:

Crystallization kinetics of rapid spray plasma processed multiple cation perovskites in open air
journal, January 2020

Hovish, Michael Q.; Rolston, Nicholas; Brüning, Karsten
Journal of Materials Chemistry A, Vol. 8, Issue 1
DOI: 10.1039/c9ta07980g

Negligible‐Pb‐Waste and Upscalable Perovskite Deposition Technology for High‐Operational‐Stability Perovskite Solar Modules
journal, February 2019

Jiang, Yan; Remeika, Mikas; Hu, Zhanhao
Advanced Energy Materials, Vol. 9, Issue 13
DOI: 10.1002/aenm.201803047

Low-Temperature (<40 °C) Atmospheric-Pressure Dielectric-Barrier-Discharge-Jet Treatment on Nickel Oxide for p–i–n Structure Perovskite Solar Cells
journal, March 2020

Tsai, Jui-Hsuan; Cheng, I-Chun; Hsu, Cheng-Che
ACS Omega, Vol. 5, Issue 11
DOI: 10.1021/acsomega.0c00067

Open Air Plasma Deposition of Superhydrophilic Titania Coatings
journal, March 2019

Hovish, Michael Q.; Hilt, Florian; Rolston, Nicholas
Advanced Functional Materials, Vol. 29, Issue 19
DOI: 10.1002/adfm.201806421

Similar Records in DOE PAGES and OSTI.GOV collections:

Crystallization kinetics of rapid spray plasma processed multiple cation perovskites in open air

Journal Article Hovish, Michael Q. ; Rolston, Nicholas ; Brüning, Karsten ; ... - Journal of Materials Chemistry. A

Rapid Spray Plasma Processing (RSPP) is a high throughput, scalable, and open-air route toward manufacturing perovskite solar modules. The plasma exposure is dosed such that the perovskite precursor solution is cured in milliseconds using a combination of rapid heating, reactive species, and UV photons. We implemented in situ wide angle X-ray scattering (WAXS) to characterize the crystal growth in multiple cation, mixed halide perovskite thin films—Cs_x(MA_zFA_1-z)_1-xPb(Br_0.17I_0.83)₃ for 0.05 ≤ x ≤ 0.25—fabricated in open air. The use of synchrotron radiation and high detector speeds resolved the formation and dissolution of a transient intermediate crystalline phase during the tens of millisecondsmore »« less
Cited by 11
https://doi.org/10.1039/c9ta07980g

Full Text Available
Rapid Aqueous Spray Fabrication of Robust NiO _x: A Simple and Scalable Platform for Efficient Perovskite Solar Cells

Journal Article Scheideler, William J. ; Rolston, Nicholas ; Zhao, Oliver ; ... - Advanced Energy Materials

Abstract Organometal halide perovskites have powerful intrinsic potential to drive next‐generation solar technology, but their insufficient thermomechanical reliability and unproven large‐area manufacturability limit competition with incumbent silicon photovoltaics. This work addresses these limitations by leveraging large‐area processing and robust inorganic hole transport layers (HTLs). Inverted perovskite solar cells utilizing NiO _x HTLs deposited by rapid aqueous spray‐coating that outperform spin‐coated NiO _x and lead to a 5× improvement in the fracture energy ( G _c ), a primary metric of thermomechanical stability, are presented. The morphology, chemical composition, and optoelectronic properties of the NiO _x films are characterized to understandmore »« less
Cited by 51
https://doi.org/10.1002/aenm.201803600

Full Text Available
Low-temperature sprayed SnO_x nanocomposite films with enhanced hole blocking for efficient large area perovskite solar cells

Journal Article Zhang, Jinbao ; Ding, Yichuan ; Jiang, Guochen ; ... - Journal of Materials Chemistry. A

Scalable fabrication of charge transport layers with high uniformity and compactness is essential for the commercialization of perovskite solar cells (PSCs). Cost-effective deposition of high-quality electron transport layers (ETLs) is a particularly important step to achieve low-cost, efficient and large-area PSCs. Here, an open-air (relative humidity of 40–50%) and low-temperature (≤100 °C) ultrasonic spray coating of tin oxide (SnO₂) nanocomposite films incorporating nanocrystalline SnO₂ nanoparticles in an amorphous SnO_x matrix is demonstrated to fabricate large-area ETLs for planar PSCs. The optimized SnO₂/SnO_x nanocomposite exhibits significantly enhanced hole-blocking and high-power conversion efficiencies of 18% and 16% for planar PSCs with anmore »« less
https://doi.org/10.1039/d1ta05969f

Full Text Available
Improved stability and efficiency of perovskite solar cells with submicron flexible barrier films deposited in air

Journal Article Rolston, Nicholas ; Printz, Adam D. ; Hilt, Florian ; ... - Journal of Materials Chemistry. A

We report on submicron organosilicate barrier films produced rapidly in air by a scalable spray plasma process that improves both the stability and efficiency of perovskite solar cells.
Cited by 31
https://doi.org/10.1039/c7ta09178h

Full Text Available
Engineering Stress in Perovskite Solar Cells to Improve Stability

Journal Article Rolston, Nicholas ; Bush, Kevin A. ; Printz, Adam D. ; ... - Advanced Energy Materials

An overlooked factor affecting stability: the residual stresses in perovskite films, which are tensile and can exceed 50 MPa in magnitude, a value high enough to deform copper, is reported. These stresses provide a significant driving force for fracture. Films are shown to be more unstable under tensile stress—and conversely more stable under compressive stress—when exposed to heat or humidity. Increasing the formation temperature of perovskite films directly correlates with larger residual stresses, a result of the high thermal expansion coefficient of perovskites. Specifically, this tensile stress forms upon cooling to room temperature, as the substrate constrains the perovskite frommore »« less
Cited by 244
https://doi.org/10.1002/aenm.201802139

Full Text Available

Similar Records

Title: Rapid route to efficient, scalable, and robust perovskite photovoltaics in air

Abstract

Citation Formats

Recent Advances in the Inverted Planar Structure of Perovskite Solar Cells journal, December 2015

In situ growth of epitaxial lead iodide films composed of hexagonal single crystals journal, January 2005

The emergence of perovskite solar cells journal, July 2014

Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells journal, June 2017

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells journal, May 2009

High-Performance Flexible Perovskite Solar Cells by Using a Combination of Ultrasonic Spray-Coating and Low Thermal Budget Photonic Curing journal, May 2015

Influence of Air Annealing on High Efficiency Planar Structure Perovskite Solar Cells journal, February 2015

Moving liquids with light: Photoelectrowetting on semiconductors journal, December 2011

Atomically thin two-dimensional organic-inorganic hybrid perovskites journal, September 2015

Crystallization Dynamics of Organolead Halide Perovskite by Real-Time X-ray Diffraction journal, July 2015

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency journal, January 2016

Optical and structural properties of PbI2 thin films journal, July 2007

Mechanical integrity of solution-processed perovskite solar cells journal, December 2016

Plasma–liquid interactions: a review and roadmap journal, September 2016

The effect of illumination on the formation of metal halide perovskite films journal, April 2017

Scaffold-reinforced perovskite compound solar cells journal, January 2017

Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells journal, July 2015

Toward Large Scale Roll-to-Roll Production of Fully Printed Perovskite Solar Cells journal, January 2015

Under the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications journal, June 2015

Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers journal, October 2015

Investigation of CH 3 NH 3 PbI 3 Degradation Rates and Mechanisms in Controlled Humidity Environments Using in Situ Techniques journal, January 2015

Degradation observations of encapsulated planar CH 3 NH 3 PbI 3 perovskite solar cells at high temperatures and humidity journal, January 2015

Nucleation and Crystal Growth of Organic–Inorganic Lead Halide Perovskites under Different Relative Humidity journal, April 2015

Formamidinium and Cesium Hybridization for Photo- and Moisture-Stable Perovskite Solar Cell journal, September 2015

Improved stability and efficiency of perovskite solar cells with submicron flexible barrier films deposited in air journal, January 2017

A Closer Look into Two-Step Perovskite Conversion with X-ray Scattering journal, March 2015

The light and shade of perovskite solar cells journal, August 2014

Transformation of the Excited State and Photovoltaic Efficiency of CH 3 NH 3 PbI 3 Perovskite upon Controlled Exposure to Humidified Air journal, January 2015

High-efficiency solution-processed perovskite solar cells with millimeter-scale grains journal, January 2015

Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells text, January 2015

A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules journal, September 2017

Hybrid Organic-Inorganic Perovskites (HOIPs): Opportunities and Challenges journal, July 2015

Identification and characterization of the intermediate phase in hybrid organic–inorganic MAPbI 3 perovskite journal, January 2016

Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells journal, October 2013

Crystallization Kinetics of Lead Halide Perovskite Film Monitored by In Situ Terahertz Spectroscopy journal, January 2017

An augmented double cantilever beam model for studying crack propagation and arrest journal, March 1973

Crystallization kinetics of rapid spray plasma processed multiple cation perovskites in open air journal, January 2020

Negligible‐Pb‐Waste and Upscalable Perovskite Deposition Technology for High‐Operational‐Stability Perovskite Solar Modules journal, February 2019

Low-Temperature (<40 °C) Atmospheric-Pressure Dielectric-Barrier-Discharge-Jet Treatment on Nickel Oxide for p–i–n Structure Perovskite Solar Cells journal, March 2020

Open Air Plasma Deposition of Superhydrophilic Titania Coatings journal, March 2019

Recent Advances in the Inverted Planar Structure of Perovskite Solar Cells
journal, December 2015

In situ growth of epitaxial lead iodide films composed of hexagonal single crystals
journal, January 2005

The emergence of perovskite solar cells
journal, July 2014

Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
journal, June 2017

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
journal, May 2009

High-Performance Flexible Perovskite Solar Cells by Using a Combination of Ultrasonic Spray-Coating and Low Thermal Budget Photonic Curing
journal, May 2015

Influence of Air Annealing on High Efficiency Planar Structure Perovskite Solar Cells
journal, February 2015

Moving liquids with light: Photoelectrowetting on semiconductors
journal, December 2011

Atomically thin two-dimensional organic-inorganic hybrid perovskites
journal, September 2015

Crystallization Dynamics of Organolead Halide Perovskite by Real-Time X-ray Diffraction
journal, July 2015

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency
journal, January 2016

Optical and structural properties of PbI2 thin films
journal, July 2007

Mechanical integrity of solution-processed perovskite solar cells
journal, December 2016

Plasma–liquid interactions: a review and roadmap
journal, September 2016

The effect of illumination on the formation of metal halide perovskite films
journal, April 2017

Scaffold-reinforced perovskite compound solar cells
journal, January 2017

Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells
journal, July 2015

Toward Large Scale Roll-to-Roll Production of Fully Printed Perovskite Solar Cells
journal, January 2015

Under the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications
journal, June 2015

Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
journal, October 2015

Investigation of CH ₃ NH ₃ PbI ₃ Degradation Rates and Mechanisms in Controlled Humidity Environments Using in Situ Techniques
journal, January 2015

Degradation observations of encapsulated planar CH ₃ NH ₃ PbI ₃ perovskite solar cells at high temperatures and humidity
journal, January 2015

Nucleation and Crystal Growth of Organic–Inorganic Lead Halide Perovskites under Different Relative Humidity
journal, April 2015

Formamidinium and Cesium Hybridization for Photo- and Moisture-Stable Perovskite Solar Cell
journal, September 2015

Improved stability and efficiency of perovskite solar cells with submicron flexible barrier films deposited in air
journal, January 2017

A Closer Look into Two-Step Perovskite Conversion with X-ray Scattering
journal, March 2015

The light and shade of perovskite solar cells
journal, August 2014

Transformation of the Excited State and Photovoltaic Efficiency of CH ₃ NH ₃ PbI ₃ Perovskite upon Controlled Exposure to Humidified Air
journal, January 2015

High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
journal, January 2015

Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells
text, January 2015

A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules
journal, September 2017

Hybrid Organic-Inorganic Perovskites (HOIPs): Opportunities and Challenges
journal, July 2015

Identification and characterization of the intermediate phase in hybrid organic–inorganic MAPbI ₃ perovskite
journal, January 2016

Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
journal, October 2013

Crystallization Kinetics of Lead Halide Perovskite Film Monitored by In Situ Terahertz Spectroscopy
journal, January 2017

An augmented double cantilever beam model for studying crack propagation and arrest
journal, March 1973

Crystallization kinetics of rapid spray plasma processed multiple cation perovskites in open air
journal, January 2020

Negligible‐Pb‐Waste and Upscalable Perovskite Deposition Technology for High‐Operational‐Stability Perovskite Solar Modules
journal, February 2019

Low-Temperature (<40 °C) Atmospheric-Pressure Dielectric-Barrier-Discharge-Jet Treatment on Nickel Oxide for p–i–n Structure Perovskite Solar Cells
journal, March 2020

Open Air Plasma Deposition of Superhydrophilic Titania Coatings
journal, March 2019