DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Liquid level sensing for harsh environment applications using distributed fiber optic temperature measurements

Abstract

This work demonstrates the measurement of liquid level from spatially distributed temperature measurements using optical frequency domain reflectometry. The goal of this work is to provide initial evidence for a liquid level sensor concept that could be applied in harsh environments such as those with: conductive, flammable, or other chemically aggressive media; electromagnetic interference; high temperatures (up to ~1000 °C); and neutron/gamma radiation. The sensor concept includes fiber optic sensors, along with an insulated heater wire assembled inside a protective Inconel 600 sheath. When the heater is not powered, the sensor provides spatially distributed temperature measurements along the length of the fiber. When the heater is powered, the difference in heat transfer in the liquid vs. vapor sections leads to a higher fiber temperature at locations above the liquid/vapor interface. The initial demonstration described in this work tested the sensor in a tank of water that was drained in increments of 2.5 cm. A model for determining liquid level from the distributed temperature measurements was developed that resulted in an accuracy of ±0.5 cm. Finally, the paper addresses potential effects of axial conduction through the sensor sheath, as well as ways to limit these effects to avoid “smearing” of whatmore » would otherwise be a step change in temperature at the liquid/vapor interface.« less

Authors:
ORCiD logo [1]; ORCiD logo [1]
  1. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Publication Date:
Research Org.:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Sponsoring Org.:
USDOE Laboratory Directed Research and Development (LDRD) Program
OSTI Identifier:
1471912
Grant/Contract Number:  
AC05-00OR22725
Resource Type:
Accepted Manuscript
Journal Name:
Sensors and Actuators. A, Physical
Additional Journal Information:
Journal Volume: 282; Journal Issue: C; Journal ID: ISSN 0924-4247
Publisher:
Elsevier
Country of Publication:
United States
Language:
English
Subject:
42 ENGINEERING; 47 OTHER INSTRUMENTATION; Liquid level; Fiber optic; Sensor; Spatially distributed

Citation Formats

Petrie, Christian M., and McDuffee, Joel L. Liquid level sensing for harsh environment applications using distributed fiber optic temperature measurements. United States: N. p., 2018. Web. doi:10.1016/j.sna.2018.09.014.
Petrie, Christian M., & McDuffee, Joel L. Liquid level sensing for harsh environment applications using distributed fiber optic temperature measurements. United States. https://doi.org/10.1016/j.sna.2018.09.014
Petrie, Christian M., and McDuffee, Joel L. Thu . "Liquid level sensing for harsh environment applications using distributed fiber optic temperature measurements". United States. https://doi.org/10.1016/j.sna.2018.09.014. https://www.osti.gov/servlets/purl/1471912.
@article{osti_1471912,
title = {Liquid level sensing for harsh environment applications using distributed fiber optic temperature measurements},
author = {Petrie, Christian M. and McDuffee, Joel L.},
abstractNote = {This work demonstrates the measurement of liquid level from spatially distributed temperature measurements using optical frequency domain reflectometry. The goal of this work is to provide initial evidence for a liquid level sensor concept that could be applied in harsh environments such as those with: conductive, flammable, or other chemically aggressive media; electromagnetic interference; high temperatures (up to ~1000 °C); and neutron/gamma radiation. The sensor concept includes fiber optic sensors, along with an insulated heater wire assembled inside a protective Inconel 600 sheath. When the heater is not powered, the sensor provides spatially distributed temperature measurements along the length of the fiber. When the heater is powered, the difference in heat transfer in the liquid vs. vapor sections leads to a higher fiber temperature at locations above the liquid/vapor interface. The initial demonstration described in this work tested the sensor in a tank of water that was drained in increments of 2.5 cm. A model for determining liquid level from the distributed temperature measurements was developed that resulted in an accuracy of ±0.5 cm. Finally, the paper addresses potential effects of axial conduction through the sensor sheath, as well as ways to limit these effects to avoid “smearing” of what would otherwise be a step change in temperature at the liquid/vapor interface.},
doi = {10.1016/j.sna.2018.09.014},
journal = {Sensors and Actuators. A, Physical},
number = C,
volume = 282,
place = {United States},
year = {Thu Sep 13 00:00:00 EDT 2018},
month = {Thu Sep 13 00:00:00 EDT 2018}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 12 works
Citation information provided by
Web of Science

Save / Share:

Works referenced in this record:

Accident tolerant fuel cladding development: Promise, status, and challenges
journal, April 2018


High Level Gamma and Neutron Irradiation of Silica Optical Fibers in CEA OSIRIS Nuclear Reactor
journal, August 2008

  • Cheymol, Guy; Long, HervÉ; Villard, Jean FranÇois
  • IEEE Transactions on Nuclear Science, Vol. 55, Issue 4
  • DOI: 10.1109/TNS.2008.924056

Radiation Effects on Silica-Based Optical Fibers: Recent Advances and Future Challenges
journal, June 2013

  • Girard, S.; Kuhnhenn, J.; Gusarov, A.
  • IEEE Transactions on Nuclear Science, Vol. 60, Issue 3
  • DOI: 10.1109/TNS.2012.2235464

High Neutron Fluence Survivability Testing of Advanced Fiber Bragg Grating Sensors
conference, January 2004

  • Fielder, Robert S.
  • SPACE TECHNOLOGY AND APPLICATIONS INTERNAT.FORUM-STAIF 2004: Conf.on Thermophys.in Microgravity; Commercial/Civil Next Gen.Space Transp.; 21st Symp.Space Nuclear Power & Propulsion; Human Space Explor.; Space Colonization; New Frontiers & Future Concepts, AIP Conference Proceedings
  • DOI: 10.1063/1.1649627

Reactor radiation-induced attenuation in fused silica optical fibers heated up to 1000 °C
journal, February 2015


In-situ gamma radiation induced attenuation in silica optical fibers heated up to 600°C
journal, November 2013


Fiber-optic liquid-level sensor
journal, February 1997


Fiber-optic liquid-level sensor
journal, December 1992


Fiber-Optic Liquid Level Sensor
journal, December 2011

  • Antonio-Lopez, José E.; May-Arrioja, Daniel A.; LiKamWa, Patrick
  • IEEE Photonics Technology Letters, Vol. 23, Issue 23
  • DOI: 10.1109/LPT.2011.2170058

All-fiber-optic sensor for liquid level measurement
journal, May 1999

  • Ilev, Ilko K.; Waynant, Ronald W.
  • Review of Scientific Instruments, Vol. 70, Issue 5
  • DOI: 10.1063/1.1149792

Fiber-optic liquid-level continuous gauge
journal, January 2006

  • Pérez-Ocón, F.; Rubiño, M.; Abril, J. M.
  • Sensors and Actuators A: Physical, Vol. 125, Issue 2
  • DOI: 10.1016/j.sna.2005.07.019

Fiber-optic liquid-level sensor using a long-period grating
journal, January 2001

  • Khaliq, Sarfraz; James, Stephen W.; Tatam, Ralph P.
  • Optics Letters, Vol. 26, Issue 16
  • DOI: 10.1364/OL.26.001224

Fiber-optic sensor for liquid level measurement
journal, January 2011

  • Antonio-Lopez, J. E.; Sanchez-Mondragon, J. J.; LiKamWa, P.
  • Optics Letters, Vol. 36, Issue 17
  • DOI: 10.1364/OL.36.003425

A digital fiber-optic liquid level sensor
journal, January 1987


Agile lensing-based non-contact liquid level optical sensor for extreme environments
journal, September 2010


Distributed flow sensing using optical hot -wire grid
journal, January 2012

  • Chen, Tong; Wang, Qingqing; Zhang, Botao
  • Optics Express, Vol. 20, Issue 8
  • DOI: 10.1364/OE.20.008240

High resolution optical frequency domain reflectometry for characterization of components and assemblies
journal, January 2005

  • Soller, Brian J.; Gifford, Dawn K.; Wolfe, Matthew S.
  • Optics Express, Vol. 13, Issue 2
  • DOI: 10.1364/OPEX.13.000666

Fiber Bragg grating technology fundamentals and overview
journal, January 1997

  • Hill, K. O.; Meltz, G.
  • Journal of Lightwave Technology, Vol. 15, Issue 8
  • DOI: 10.1109/50.618320

Fiber grating sensors
journal, January 1997

  • Kersey, A. D.; Davis, M. A.; Patrick, H. J.
  • Journal of Lightwave Technology, Vol. 15, Issue 8
  • DOI: 10.1109/50.618377