Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification
Abstract
Innovative designs for turbines can be achieved by advances in nickel-based superalloys and manufacturing methods, including the adoption of additive manufacturing. In this regard, selective electron beam melting (SEBM) and selective laser melting (SLM) of nickel-based superalloys do provide distinct advantages. Furthermore, the direct energy deposition (DED) processes can be used for repair and reclamation of nickel alloy components. The current paper explores opportunities for innovation and qualification challenges with respect to deployment of AM as a disruptive manufacturing technology. Here in the first part of the paper, fundamental correlations of processing parameters to defect tendency and microstructure evolution will be explored using DED process. In the second part of the paper, opportunities for innovation in terms of site-specific control of microstructure during processing will be discussed. In the third part of the paper, challenges in qualification of AM parts for service will be discussed and potential methods to alleviate these issues through in situ process monitoring, and big data analytics are proposed.
- Authors:
-
- Univ. of Tennessee, Knoxville, TN (United States). Mechanical, Aerospace and Biomedical Engineering
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Arconic, Pittsburgh, PA (United States)
- Oerlikon, Charlotte, NC (United States)
- Publication Date:
- Research Org.:
- Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
- Sponsoring Org.:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- OSTI Identifier:
- 1471909
- Grant/Contract Number:
- AC05-00OR22725
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science
- Additional Journal Information:
- Journal Volume: 49; Journal Issue: 9; Journal ID: ISSN 1073-5623
- Publisher:
- ASM International
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE
Citation Formats
Babu, Sudarsanam Suresh, Raghavan, Narendran, Raplee, Jacob, Foster, Sarah J., Frederick, Curtis, Haines, Michael, Dinwiddie, Ralph Barton, Kirka, Michael M., Plotkowski, Alex J., Lee, Yousub, and Dehoff, Ryan R. Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification. United States: N. p., 2018.
Web. doi:10.1007/s11661-018-4702-4.
Babu, Sudarsanam Suresh, Raghavan, Narendran, Raplee, Jacob, Foster, Sarah J., Frederick, Curtis, Haines, Michael, Dinwiddie, Ralph Barton, Kirka, Michael M., Plotkowski, Alex J., Lee, Yousub, & Dehoff, Ryan R. Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification. United States. https://doi.org/10.1007/s11661-018-4702-4
Babu, Sudarsanam Suresh, Raghavan, Narendran, Raplee, Jacob, Foster, Sarah J., Frederick, Curtis, Haines, Michael, Dinwiddie, Ralph Barton, Kirka, Michael M., Plotkowski, Alex J., Lee, Yousub, and Dehoff, Ryan R. Fri .
"Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification". United States. https://doi.org/10.1007/s11661-018-4702-4. https://www.osti.gov/servlets/purl/1471909.
@article{osti_1471909,
title = {Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification},
author = {Babu, Sudarsanam Suresh and Raghavan, Narendran and Raplee, Jacob and Foster, Sarah J. and Frederick, Curtis and Haines, Michael and Dinwiddie, Ralph Barton and Kirka, Michael M. and Plotkowski, Alex J. and Lee, Yousub and Dehoff, Ryan R.},
abstractNote = {Innovative designs for turbines can be achieved by advances in nickel-based superalloys and manufacturing methods, including the adoption of additive manufacturing. In this regard, selective electron beam melting (SEBM) and selective laser melting (SLM) of nickel-based superalloys do provide distinct advantages. Furthermore, the direct energy deposition (DED) processes can be used for repair and reclamation of nickel alloy components. The current paper explores opportunities for innovation and qualification challenges with respect to deployment of AM as a disruptive manufacturing technology. Here in the first part of the paper, fundamental correlations of processing parameters to defect tendency and microstructure evolution will be explored using DED process. In the second part of the paper, opportunities for innovation in terms of site-specific control of microstructure during processing will be discussed. In the third part of the paper, challenges in qualification of AM parts for service will be discussed and potential methods to alleviate these issues through in situ process monitoring, and big data analytics are proposed.},
doi = {10.1007/s11661-018-4702-4},
journal = {Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science},
number = 9,
volume = 49,
place = {United States},
year = {Fri Jun 01 00:00:00 EDT 2018},
month = {Fri Jun 01 00:00:00 EDT 2018}
}
Web of Science
Works referenced in this record:
Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture
journal, January 2017
- Hirsch, Matthias; Patel, Rikesh; Li, Wenqi
- Additive Manufacturing, Vol. 13
Inconel 939 processed by selective laser melting: Effect of microstructure and temperature on the mechanical properties under static and cyclic loading
journal, December 2013
- Kanagarajah, P.; Brenne, F.; Niendorf, T.
- Materials Science and Engineering: A, Vol. 588
A Coupled Thermal, Fluid Flow, and Solidification Model for the Processing of Single-Crystal Alloy CMSX-4 Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair (Part I)
journal, July 2014
- Acharya, Ranadip; Bansal, Rohan; Gambone, Justin J.
- Metallurgical and Materials Transactions B, Vol. 45, Issue 6
Evolution of solidification texture during additive manufacturing
journal, November 2015
- Wei, H. L.; Mazumder, J.; DebRoy, T.
- Scientific Reports, Vol. 5, Issue 1
Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
text, January 2016
- Jägle, Eric A.; Sheng, Zhendong; Wu, Liang
- RWTH Aachen University
Additive manufacturing of materials: Opportunities and challenges
journal, November 2015
- Babu, S. S.; Love, L.; Dehoff, R.
- MRS Bulletin, Vol. 40, Issue 12
Evolution of dislocation structure in the heat affected zone of a nickel-based single crystal
journal, October 2004
- Barabash, O. M.; Horton, J. A.; Babu, S. S.
- Journal of Applied Physics, Vol. 96, Issue 7
Dendritic growth
journal, January 1994
- Trivedi, R.; Kurz, W.
- International Materials Reviews, Vol. 39, Issue 2
Characterization of the microstructure evolution in a nickel base superalloy during continuous cooling conditions
journal, December 2001
- Babu, S. S.; Miller, M. K.; Vitek, J. M.
- Acta Materialia, Vol. 49, Issue 20
Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys
journal, May 2017
- Catchpole-Smith, S.; Aboulkhair, N.; Parry, L.
- Additive Manufacturing, Vol. 15
The Dependence of Portevin–Le Châtelier Effect on the γ′ Precipitates in a Wrought Ni-Base Superalloy
journal, August 2016
- Wang, Xinguang; Han, Guoming; Cui, Chuanyong
- Metallurgical and Materials Transactions A, Vol. 47, Issue 12
The Portevin-Le Chatelier Effect in the Ni-Based Superalloy IN100
journal, September 2015
- Fernandez-Zelaia, Patxi; Adair, Benjamin S.; Barker, Vincent M.
- Metallurgical and Materials Transactions A, Vol. 46, Issue 12
Numerical analysis of the weldability of superalloys
journal, February 2001
- Dye, D.; Hunziker, O.; Reed, R. C.
- Acta Materialia, Vol. 49, Issue 4
Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing
journal, March 2017
- Raplee, J.; Plotkowski, A.; Kirka, M. M.
- Scientific Reports, Vol. 7, Issue 1
Association of microstructural features and rippling phenomenon in 304 stainless steel gas tungsten arc welds
journal, April 2004
- Hall, A. C.; Robino, C. V.
- Science and Technology of Welding and Joining, Vol. 9, Issue 2
Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys
journal, January 2015
- Denlinger, Erik R.; Heigel, Jarred C.; Michaleris, Pan
- Journal of Materials Processing Technology, Vol. 215
Additive Manufacturing of Single-Crystal Superalloy CMSX-4 Through Scanning Laser Epitaxy: Computational Modeling, Experimental Process Development, and Process Parameter Optimization
journal, June 2016
- Basak, Amrita; Acharya, Ranadip; Das, Suman
- Metallurgical and Materials Transactions A, Vol. 47, Issue 8
Processability of different IN738LC powder batches by selective laser melting
journal, March 2016
- Engeli, Roman; Etter, Thomas; Hövel, Simone
- Journal of Materials Processing Technology, Vol. 229
3D printing: the new industrial revolution
journal, December 2013
- Berman, Barry
- IEEE Engineering Management Review, Vol. 41, Issue 4
Printability of alloys for additive manufacturing
journal, January 2016
- Mukherjee, T.; Zuback, J. S.; De, A.
- Scientific Reports, Vol. 6, Issue 1
Prediction of microstructure in laser powder bed fusion process
journal, February 2017
- Acharya, Ranadip; Sharon, John A.; Staroselsky, Alexander
- Acta Materialia, Vol. 124
3D printing of high-strength aluminium alloys
journal, September 2017
- Martin, John H.; Yahata, Brennan D.; Hundley, Jacob M.
- Nature, Vol. 549, Issue 7672
Single-crystal laser deposition of superalloys: processing–microstructure maps
journal, April 2001
- Gäumann, M.; Bezençon, C.; Canalis, P.
- Acta Materialia, Vol. 49, Issue 6
Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy
journal, September 2014
- Nie, Pulin; Ojo, O. A.; Li, Zhuguo
- Acta Materialia, Vol. 77
Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting: Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4
journal, April 2015
- Ramsperger, Markus; Mújica Roncery, Laís; Lopez-Galilea, Inmaculada
- Advanced Engineering Materials, Vol. 17, Issue 10
Falcon: Visual analysis of large, irregularly sampled, and multivariate time series data in additive manufacturing
journal, April 2017
- Steed, Chad A.; Halsey, William; Dehoff, Ryan
- Computers & Graphics, Vol. 63
Microstructural Control of Additively Manufactured Metallic Materials
journal, July 2016
- Collins, P. C.; Brice, D. A.; Samimi, P.
- Annual Review of Materials Research, Vol. 46, Issue 1
Hot workability and microstructure evolution of the nickel-based superalloy Inconel 718 produced by laser metal deposition
journal, April 2018
- Bambach, Markus; Sizova, Irina; Silze, Frank
- Journal of Alloys and Compounds, Vol. 740
Solidification Phase and Microstructure Selection Maps for Fe-Cr-Ni Alloys.
journal, January 1999
- Fukumoto, Shigeo; Kurz, Wilfried
- ISIJ International, Vol. 39, Issue 12
3-D printing: The new industrial revolution
journal, March 2012
- Berman, Barry
- Business Horizons, Vol. 55, Issue 2
Surface texture metrology for metal additive manufacturing: a review
journal, October 2016
- Townsend, A.; Senin, N.; Blunt, L.
- Precision Engineering, Vol. 46
An iterative approach of hot isostatic pressing tooling design for net-shape IN718 superalloy parts
journal, August 2015
- Essa, Khamis; Khan, Raja; Hassanin, Hany
- The International Journal of Advanced Manufacturing Technology, Vol. 83, Issue 9-12
Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing
journal, August 2014
- Bi, Guijun; Sun, Chen-Nan; Chen, Hui-chi
- Materials & Design, Vol. 60
Thermal Science of Weld Bead Defects: A Review
journal, November 2010
- Wei, P. S.
- Journal of Heat Transfer, Vol. 133, Issue 3
Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
journal, August 2015
- Harrison, Neil J.; Todd, Iain; Mumtaz, Kamran
- Acta Materialia, Vol. 94
Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
journal, February 2014
- Jia, Qingbo; Gu, Dongdong
- Journal of Alloys and Compounds, Vol. 585
Metallic materials for 3D printing
journal, October 2016
- Das, Suman; Bourell, David L.; Babu, S. S.
- MRS Bulletin, Vol. 41, Issue 10
Additive Manufacturing Technologies
book, January 2010
- Gibson, Ian; Rosen, David W.; Stucker, Brent
- Springer New York, NY
Dendritic growth
journal, January 1994
- Trivedi, R.; Kurz, W.
- International Materials Reviews, Vol. 39, Issue 2
Additive manufacturing of Ni-based superalloys: The outstanding issues
journal, October 2016
- Attallah, Moataz M.; Jennings, Rachel; Wang, Xiqian
- MRS Bulletin, Vol. 41, Issue 10
Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering
journal, January 2015
- Sochalski-Kolbus, L. M.; Payzant, E. A.; Cornwell, P. A.
- Metallurgical and Materials Transactions A, Vol. 46, Issue 3
Additively manufactured hierarchical stainless steels with high strength and ductility
journal, October 2017
- Wang, Y. Morris; Voisin, Thomas; McKeown, Joseph T.
- Nature Materials, Vol. 17, Issue 1
A simple model for multipass steel welds
journal, November 1994
- Reed, R. C.; Bhadeshia, H. K. D. H.
- Acta Metallurgica et Materialia, Vol. 42, Issue 11
Verification and validation of a rapid heat transfer calculation methodology for transient melt pool solidification conditions in powder bed metal additive manufacturing
journal, December 2017
- Plotkowski, A.; Kirka, M. M.; Babu, S. S.
- Additive Manufacturing, Vol. 18
Characterization of topology optimized Ti-6Al-4V components using electron beam powder bed fusion
journal, January 2018
- Yoder, S.; Morgan, S.; Kinzy, C.
- Additive Manufacturing, Vol. 19
Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)
journal, January 2015
- Kunze, Karsten; Etter, Thomas; Grässlin, Jürgen
- Materials Science and Engineering: A, Vol. 620
Characterization of Laser Additive Manufacturing-Fabricated Porous Superalloys for Turbine Components
journal, May 2017
- Ealy, Brandon; Calderon, Luisana; Wang, Wenping
- Journal of Engineering for Gas Turbines and Power, Vol. 139, Issue 10
Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
journal, January 2016
- Ramsperger, Markus; Singer, Robert F.; Körner, Carolin
- Metallurgical and Materials Transactions A, Vol. 47, Issue 3
Stray grain formation, thermomechanical stress and solidification cracking in single crystal nickel base superalloy welds
journal, December 2004
- Park, J. -W.; Vitek, J. M.; Babu, S. S.
- Science and Technology of Welding and Joining, Vol. 9, Issue 6
Microstructure evolution characteristics of Inconel 625 alloy from selective laser melting to heat treatment
journal, September 2017
- Li, C.; White, R.; Fang, X. Y.
- Materials Science and Engineering: A, Vol. 705
Process optimisation of selective laser melting using energy density model for nickel based superalloys
journal, February 2016
- Carter, L. N.; Wang, X.; Read, N.
- Materials Science and Technology, Vol. 32, Issue 7
Real-Time Composition Monitoring Using Support Vector Regression of Laser-Induced Plasma for Laser Additive Manufacturing
journal, January 2017
- Song, Lijun; Huang, Wenkang; Han, Xu
- IEEE Transactions on Industrial Electronics, Vol. 64, Issue 1
A Review of Shaped Hole Turbine Film-Cooling Technology
journal, March 2005
- Bunker, Ronald S.
- Journal of Heat Transfer, Vol. 127, Issue 4
Evaluation of residual plastic strain distribution in dissimilar metal weld by hardness mapping
journal, October 2013
- Qiao, D.; Zhang, W.; Pan, T-Y
- Science and Technology of Welding and Joining, Vol. 18, Issue 7
Microstructure and yield strength of SLM-fabricated CM247LC Ni-Superalloy
journal, April 2017
- Wang, Xiqian; Carter, Luke N.; Pang, Bo
- Acta Materialia, Vol. 128
Laser Epitaxial Cladding of Ni-Base Single Crystal Superalloy
journal, June 2008
- Fujita, Yoshihiro; Saida, Kazuyoshi; Nishimoto, Kazutoshi
- Materials Science Forum, Vol. 580-582
Powder bed binder jet 3D printing of Inconel 718: Densification, microstructural evolution and challenges☆
journal, August 2017
- Nandwana, Peeyush; Elliott, Amy M.; Siddel, Derek
- Current Opinion in Solid State and Materials Science, Vol. 21, Issue 4
Temperature Profile and Imaging Analysis of Laser Additive Manufacturing of Stainless Steel
journal, January 2013
- Islam, M.; Purtonen, T.; Piili, H.
- Physics Procedia, Vol. 41
Toward prediction of microstructural evolution during laser surface alloying
journal, April 2002
- Babu, S. S.; David, S. A.; Martukanitz, R. P.
- Metallurgical and Materials Transactions A, Vol. 33, Issue 4
Computational modeling of residual stress formation during the electron beam melting process for Inconel 718
journal, July 2015
- Prabhakar, P.; Sames, W. J.; Dehoff, R.
- Additive Manufacturing, Vol. 7
Additive manufacturing of metallic components – Process, structure and properties
journal, March 2018
- DebRoy, T.; Wei, H. L.; Zuback, J. S.
- Progress in Materials Science, Vol. 92
Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure
journal, August 2014
- Helmer, Harald Ernst; Körner, Carolin; Singer, Robert Friedrich
- Journal of Materials Research, Vol. 29, Issue 17
Laser additive manufacturing of metallic components: materials, processes and mechanisms
journal, May 2012
- Gu, D. D.; Meiners, W.; Wissenbach, K.
- International Materials Reviews, Vol. 57, Issue 3, p. 133-164
Plastic strain localization in metals: origins and consequences
journal, January 2014
- Antolovich, Stephen D.; Armstrong, Ronald W.
- Progress in Materials Science, Vol. 59
An improved prediction of residual stresses and distortion in additive manufacturing
journal, January 2017
- Mukherjee, T.; Zhang, W.; DebRoy, T.
- Computational Materials Science, Vol. 126
Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
journal, January 2016
- Jägle, Eric A.; Sheng, Zhendong; Wu, Liang
- JOM, Vol. 68, Issue 3
Tailoring the thermal conductivity of the powder bed in Electron Beam Melting (EBM) Additive Manufacturing
journal, September 2017
- Smith, C. J.; Tammas-Williams, S.; Hernandez-Nava, E.
- Scientific Reports, Vol. 7, Issue 1
Investigations of γ′, γ″ and δ precipitates in heat-treated Inconel 718 alloy fabricated by selective laser melting
journal, February 2018
- Cao, G. H.; Sun, T. Y.; Wang, C. H.
- Materials Characterization, Vol. 136
Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting
journal, June 2013
- Murr, L. E.; Martinez, E.; Pan, X. M.
- Acta Materialia, Vol. 61, Issue 11
Localized melt-scan strategy for site specific control of grain size and primary dendrite arm spacing in electron beam additive manufacturing
journal, November 2017
- Raghavan, Narendran; Simunovic, Srdjan; Dehoff, Ryan
- Acta Materialia, Vol. 140
Electron beam welding – Techniques and trends – Review
journal, August 2016
- Węglowski, M. St.; Błacha, S.; Phillips, A.
- Vacuum, Vol. 130
The metallurgy and processing science of metal additive manufacturing
journal, March 2016
- Sames, W. J.; List, F. A.; Pannala, S.
- International Materials Reviews, Vol. 61, Issue 5
Thermodynamic and kinetic models for describing microstructure evolution during joining of metals and alloys
journal, November 2009
- Babu, S. S.
- International Materials Reviews, Vol. 54, Issue 6
Pressure loss and heat transfer performance for additively and conventionally manufactured pin fin arrays
journal, May 2017
- Kirsch, Kathryn L.; Thole, Karen A.
- International Journal of Heat and Mass Transfer, Vol. 108
Site specific control of crystallographic grain orientation through electron beam additive manufacturing
journal, November 2014
- Dehoff, R. R.; Kirka, M. M.; Sames, W. J.
- Materials Science and Technology, Vol. 31, Issue 8
Metal Additive Manufacturing: A Review
journal, April 2014
- Frazier, William E.
- Journal of Materials Engineering and Performance, Vol. 23, Issue 6
Quantification of thermomechanical conditions for weld solidification cracking
journal, February 1997
- Feng, Z.; David, S. A.; Zacharia, T.
- Science and Technology of Welding and Joining, Vol. 2, Issue 1
Rationalization of Microstructure Heterogeneity in INCONEL 718 Builds Made by the Direct Laser Additive Manufacturing Process
journal, June 2014
- Tian, Yuan; McAllister, Donald; Colijn, Hendrik
- Metallurgical and Materials Transactions A, Vol. 45, Issue 10
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
journal, April 2016
- Everton, Sarah K.; Hirsch, Matthias; Stravroulakis, Petros
- Materials & Design, Vol. 95
Optimisation of selective laser melting for a high temperature Ni-superalloy
journal, June 2015
- Carter, Luke N.; Essa, Khamis; Attallah, Moataz M.
- Rapid Prototyping Journal, Vol. 21, Issue 4
Single track formation in selective laser melting of metal powders
journal, September 2010
- Yadroitsev, I.; Gusarov, A.; Yadroitsava, I.
- Journal of Materials Processing Technology, Vol. 210, Issue 12
Normalised model-based processing diagrams for additive layer manufacture of engineering alloys
journal, April 2016
- Thomas, Meurig; Baxter, Gavin J.; Todd, Iain
- Acta Materialia, Vol. 108
Heat transfer and fluid flow during laser spot welding of 304 stainless steel
journal, May 2003
- He, X.; Fuerschbach, P. W.; DebRoy, T.
- Journal of Physics D: Applied Physics, Vol. 36, Issue 12
Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing
journal, June 2016
- Raghavan, Narendran; Dehoff, Ryan; Pannala, Sreekanth
- Acta Materialia, Vol. 112
Selective laser melting additive manufactured Inconel 718 superalloy parts: High-temperature oxidation property and its mechanisms
journal, October 2014
- Jia, Qingbo; Gu, Dongdong
- Optics & Laser Technology, Vol. 62
Mechanisms of equiaxed grain formation in ferritic stainless steel gas tungsten arc welds
journal, May 1995
- Villafuerte, J. C.; Kerr, H. W.; David, S. A.
- Materials Science and Engineering: A, Vol. 194, Issue 2
Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting
journal, January 2018
- Chauvet, Edouard; Kontis, Paraskevas; Jägle, Eric A.
- Acta Materialia, Vol. 142
Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions
journal, January 2017
- Wang, Zhuqing; Denlinger, Erik; Michaleris, Panagiotis
- Materials & Design, Vol. 113
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
journal, July 2017
- Rodgers, Theron M.; Madison, Jonathan D.; Tikare, Veena
- Computational Materials Science, Vol. 135
Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy
journal, February 2012
- Vilaro, T.; Colin, C.; Bartout, J. D.
- Materials Science and Engineering: A, Vol. 534
Grain structure evolution in Inconel 718 during selective electron beam melting
journal, June 2016
- Helmer, H.; Bauereiß, A.; Singer, R. F.
- Materials Science and Engineering: A, Vol. 668
Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion
journal, March 2017
- Kreitcberg, Alena; Brailovski, Vladimir; Turenne, Sylvain
- Materials Science and Engineering: A, Vol. 689
Scaling Roughness Effects on Pressure Loss and Heat Transfer of Additively Manufactured Channels
journal, September 2016
- Stimpson, Curtis K.; Snyder, Jacob C.; Thole, Karen A.
- Journal of Turbomachinery, Vol. 139, Issue 2
Scaling Roughness Effects on Pressure Loss and Heat Transfer of Additively Manufactured Channels
conference, September 2016
- Stimpson, Curtis K.; Snyder, Jacob C.; Thole, Karen A.
- ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Volume 5B: Heat Transfer
Works referencing / citing this record:
Effect of Heat Treatment on Microstructure Evolution and Mechanical Properties of Selective Laser Melted Inconel 718 Alloy
journal, September 2019
- Zhang, Qiang; Ren, Pan; Tu, Xiaohui
- Journal of Materials Engineering and Performance, Vol. 28, Issue 9
Grain Growth During Keyhole Mode Pulsed Laser Powder Bed Fusion of IN738LC
journal, January 2020
- Chen, Z. W.; Guraya, T.; Singamneni, S.
- JOM, Vol. 72, Issue 3
Effect of Interlayer Cooling Time, Constraint and Tool Path Strategy on Deformation of Large Components Made by Laser Metal Deposition with Wire
journal, November 2019
- Lee, Yousub; Bandari, Yashwanth; Nandwana, Peeyush
- Applied Sciences, Vol. 9, Issue 23