Processes and electron flow in a microbial electrolysis cell bioanode fed with furanic and phenolic compounds

Journal Article · 20 March 2018 · Environmental Science and Pollution Research International

DOI: https://doi.org/10.1007/s11356-018-1747-2 · OSTI ID:1468054

Zeng, Xiaofei ^[1]; Borole, Abhijeet P. ^[2]; Pavlostathis, Spyros G.  ^[1]

---

1. Georgia Inst. of Technology, Atlanta, GA (United States). School of Civil and Environmental Engineering
2. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division; Univ. of Tennessee, Knoxville, TN (United States). Bredesen Center for Interdisciplinary Research and Education

We report that furanic and phenolic compounds are problematic compounds resulting from the pretreatment of lignocellulosic biomass for biofuel production. Microbial electrolysis cell (MEC) is a promising technology to convert furanic and phenolic compounds to renewable H₂. The objective of the research presented here was to elucidate the processes and electron equivalents flow during the conversion of two furanic (furfural, FF; 5-hydroxymethyl furfural, HMF) and three phenolic (syringic acid, SA; vanillic acid, VA; 4-hydroxybenzoic acid, HBA) compounds in the MEC bioanode. Cyclic voltammograms of the bioanode demonstrated that purely electrochemical reactions in the biofilm attached to the electrode were negligible. Instead, microbial reactions related to the biotransformation of the five parent compounds (i.e., fermentation followed by exoelectrogenesis) were the primary processes resulting in the electron equivalents flow in the MEC bioanode. A mass-based framework of substrate utilization and electron flow was developed to quantify the distribution of the electron equivalents among the bioanode processes, including biomass growth for each of the five parent compounds. Using input parameters of anode efficiency and biomass observed yield coefficients, it was estimated that more than 50% of the SA, FF, and HMF electron equivalents were converted to current. In contrast, only 12 and 9% of VA and HBA electron equivalents, respectively, resulted in current production, while 76 and 79% remained as fermentation end products not further utilized in exoelectrogenesis. For all five compounds, it was estimated that 10% of the initially added electron equivalents were used for fermentative biomass synthesis, while 2 to 13% were used for exoelectrogenic biomass synthesis. Finally, the proposed mass-based framework provides a foundation for the simulation of bioanode processes to guide the optimization of MECs converting biomass-derived waste streams to renewable H₂.

• Research Organization: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
• Sponsoring Organization: USDOE
• Grant/Contract Number: AC05-00OR22725
• OSTI ID: 1468054
• Alternate ID(s): OSTI ID: 1474700
• Journal Information: Environmental Science and Pollution Research International, Vol. 25, Issue 1; ISSN 0944-1344
• Publisher: SpringerCopyright Statement
• Country of Publication: United States
• Language: English