Rapid Solidification in Bulk Ti-Nb Alloys by Single-Track Laser Melting
- Authors:
-
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Colorado School of Mines, Golden, CO (United States)
- Publication Date:
- Research Org.:
- Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States)
- Sponsoring Org.:
- USDOE National Nuclear Security Administration (NNSA); USDOE Office of Science (SC), Basic Energy Sciences (BES)
- OSTI Identifier:
- 1464012
- Alternate Identifier(s):
- OSTI ID: 1502007
- Report Number(s):
- LLNL-JRNL-743642
Journal ID: ISSN 1047-4838
- Grant/Contract Number:
- AC05-00OR22725; AC52-07NA27344
- Resource Type:
- Accepted Manuscript
- Journal Name:
- JOM. Journal of the Minerals, Metals & Materials Society
- Additional Journal Information:
- Journal Volume: 70; Journal Issue: 8; Journal ID: ISSN 1047-4838
- Publisher:
- Springer
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE
Citation Formats
Roehling, John D., Perron, Aurelien, Fattebert, Jean -Luc, Haxhimali, Tomorr, Guss, Gabe, Li, Tian T., Bober, David, Stokes, Adam W., Clarke, Amy J., Turchi, Patrice E. A., Matthews, Manyalibo J., and McKeown, Joseph T. Rapid Solidification in Bulk Ti-Nb Alloys by Single-Track Laser Melting. United States: N. p., 2018.
Web. doi:10.1007/s11837-018-2920-2.
Roehling, John D., Perron, Aurelien, Fattebert, Jean -Luc, Haxhimali, Tomorr, Guss, Gabe, Li, Tian T., Bober, David, Stokes, Adam W., Clarke, Amy J., Turchi, Patrice E. A., Matthews, Manyalibo J., & McKeown, Joseph T. Rapid Solidification in Bulk Ti-Nb Alloys by Single-Track Laser Melting. United States. https://doi.org/10.1007/s11837-018-2920-2
Roehling, John D., Perron, Aurelien, Fattebert, Jean -Luc, Haxhimali, Tomorr, Guss, Gabe, Li, Tian T., Bober, David, Stokes, Adam W., Clarke, Amy J., Turchi, Patrice E. A., Matthews, Manyalibo J., and McKeown, Joseph T. Tue .
"Rapid Solidification in Bulk Ti-Nb Alloys by Single-Track Laser Melting". United States. https://doi.org/10.1007/s11837-018-2920-2. https://www.osti.gov/servlets/purl/1464012.
@article{osti_1464012,
title = {Rapid Solidification in Bulk Ti-Nb Alloys by Single-Track Laser Melting},
author = {Roehling, John D. and Perron, Aurelien and Fattebert, Jean -Luc and Haxhimali, Tomorr and Guss, Gabe and Li, Tian T. and Bober, David and Stokes, Adam W. and Clarke, Amy J. and Turchi, Patrice E. A. and Matthews, Manyalibo J. and McKeown, Joseph T.},
abstractNote = {},
doi = {10.1007/s11837-018-2920-2},
journal = {JOM. Journal of the Minerals, Metals & Materials Society},
number = 8,
volume = 70,
place = {United States},
year = {Tue May 15 00:00:00 EDT 2018},
month = {Tue May 15 00:00:00 EDT 2018}
}
Free Publicly Available Full Text
Publisher's Version of Record
Other availability
Cited by: 26 works
Citation information provided by
Web of Science
Web of Science
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing
journal, December 2017
- Scipioni Bertoli, Umberto; Guss, Gabe; Wu, Sheldon
- Materials & Design, Vol. 135
Matching time and spatial scales of rapid solidification: dynamic TEM experiments coupled to CALPHAD-informed phase-field simulations
journal, December 2017
- Perron, Aurelien; Roehling, John D.; Turchi, Patrice E. A.
- Modelling and Simulation in Materials Science and Engineering, Vol. 26, Issue 1
Model for solute redistribution during rapid solidification
journal, February 1982
- Aziz, M. J.
- Journal of Applied Physics, Vol. 53, Issue 2
Primary spacing in directional solidification
journal, March 1998
- Ma, Dexin; Sahm, Peter R.
- Metallurgical and Materials Transactions A, Vol. 29, Issue 13
Thermal stability and phase transformations of martensitic Ti–Nb alloys
journal, March 2013
- Bönisch, Matthias; Calin, Mariana; Waitz, Thomas
- Science and Technology of Advanced Materials, Vol. 14, Issue 5
Phase-field simulation of solidification morphology in laser powder deposition of Ti–Nb alloys
journal, February 2012
- Fallah, V.; Amoorezaei, M.; Provatas, N.
- Acta Materialia, Vol. 60, Issue 4
Modulating laser intensity profile ellipticity for microstructural control during metal additive manufacturing
journal, April 2017
- Roehling, Tien T.; Wu, Sheldon S. Q.; Khairallah, Saad A.
- Acta Materialia, Vol. 128
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
journal, December 2014
- King, Wayne E.; Barth, Holly D.; Castillo, Victor M.
- Journal of Materials Processing Technology, Vol. 214, Issue 12
Atomic number and crystallographic contrast images with the SEM: a review of backscattered electron techniques
journal, March 1987
- Lloyd, Geoffrey E.
- Mineralogical Magazine, Vol. 51, Issue 359
Modeling and numerical simulations of dendritic crystal growth
journal, March 1993
- Kobayashi, Ryo
- Physica D: Nonlinear Phenomena, Vol. 63, Issue 3-4
Selective Laser Melting of Ti-45Nb Alloy
journal, April 2015
- Schwab, Holger; Prashanth, Konda; Löber, Lukas
- Metals, Vol. 5, Issue 2
Z-contrast stem for materials science
journal, June 1989
- Pennycook, S. J.
- Ultramicroscopy, Vol. 30, Issue 1-2
Synthesis and characterization of Ti-27.5Nb alloy made by CLAD® additive manufacturing process for biomedical applications
journal, June 2017
- Fischer, M.; Laheurte, P.; Acquier, P.
- Materials Science and Engineering: C, Vol. 75
Kinetic modeling of diffusion mobilities in bcc Ti–Nb alloys
journal, May 2009
- Liu, Yajun; Pan, Tongyan; Zhang, Lijun
- Journal of Alloys and Compounds, Vol. 476, Issue 1-2
Additive manufacturing
journal, November 2014
- Babu, S. S.; Goodridge, R.
- Materials Science and Technology, Vol. 31, Issue 8
Denudation of metal powder layers in laser powder bed fusion processes
journal, August 2016
- Matthews, Manyalibo J.; Guss, Gabe; Khairallah, Saad A.
- Acta Materialia, Vol. 114
Rapid solidification of Al-Cu eutectic alloy by laser remelting
journal, December 1989
- Zimmermann, M.; Carrard, M.; Kurz, W.
- Acta Metallurgica, Vol. 37, Issue 12
Phase-field modeling of coring during solidification of Au–Ni alloy using quaternions and CALPHAD input
journal, January 2014
- Fattebert, J. -L.; Wickett, M. E.; Turchi, P. E. A.
- Acta Materialia, Vol. 62
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
journal, April 2016
- Khairallah, Saad A.; Anderson, Andrew T.; Rubenchik, Alexander
- Acta Materialia, Vol. 108
Crystal structure and morphology in commercial NbTi (46.5 wt % Ti) superconducting fibers
journal, May 1985
- Hutchison, T. S.; Ocampo, G.; Carpenter, G. J. C.
- Scripta Metallurgica, Vol. 19, Issue 5
Time-resolved X-ray diffraction investigation of primary weld solidification in Fe-C-Al-Mn steel welds
journal, November 2002
- Babu, S. S.; Elmer, J. W.; Vitek, J. M.
- Acta Materialia, Vol. 50, Issue 19
The Shape-Memory Effect in a Titanium-35 wt.-% Niobium Alloy
journal, January 1971
- Baker, C.
- Metal Science Journal, Vol. 5, Issue 1
Biocompatibility of new Ti–Nb–Ta base alloys
journal, April 2016
- Hussein, Abdelrahman H.; Gepreel, Mohamed A. -H.; Gouda, Mohamed K.
- Materials Science and Engineering: C, Vol. 61
Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
journal, June 2017
- Ly, Sonny; Rubenchik, Alexander M.; Khairallah, Saad A.
- Scientific Reports, Vol. 7, Issue 1
Active solute effects on surface ripples in electron-beam welding solidification
journal, August 2003
- Wei, P. S.; Chen, Y. H.; Ku, J. S.
- Metallurgical and Materials Transactions B, Vol. 34, Issue 4
Simulation of the cell to plane front transition during directional solidification at high velocity
journal, April 1999
- Boettinger, William J.; A. Warren, James
- Journal of Crystal Growth, Vol. 200, Issue 3-4
In situ observations of weld pool solidification using transparent metal-analog systems
journal, April 2003
- Trivedi, R.; David, S. A.; Eshelman, M. A.
- Journal of Applied Physics, Vol. 93, Issue 8
Thermodynamic assessment of the Nb-Ti system
journal, June 2001
- Zhang, Yuelan; Liu, Huashan; Jin, Zhanpeng
- Calphad, Vol. 25, Issue 2
Dendrite growth at the limit of stability: tip radius and spacing
journal, January 1981
- Kurz, W.; Fisher, D. J.
- Acta Metallurgica, Vol. 29, Issue 1
Optical detection of conduction/keyhole mode transition in laser welding
journal, August 2007
- Sibillano, T.; Ancona, A.; Berardi, V.
- Journal of Materials Processing Technology, Vol. 191, Issue 1-3
Titanium and Titanium Alloys: Fundamentals and Applications
book, July 2003
- Leyens, Christoph; Peters, Manfred
Numerical modeling of cellular/dendritic array growth: spacing and structure predictions
journal, March 1996
- Hunt, J. D.; Lu, S. Z.
- Metallurgical and Materials Transactions A, Vol. 27, Issue 3
Mechanical compatibility of titanium implants in hard tissues
journal, September 2005
- Hanada, S.; Matsumoto, H.; Watanabe, S.
- International Congress Series, Vol. 1284
Mechanical Properties of Porous Ti-Mo and Ti-Nb Alloys for Biomedical Application by Gelcasting
journal, January 2012
- Yang, Donghua; Guo, Zhimeng; Shao, Huiping
- Procedia Engineering, Vol. 36
A numerical algorithm for the solution of a phase-field model of polycrystalline materials
journal, February 2010
- Dorr, M. R.; Fattebert, J. -L.; Wickett, M. E.
- Journal of Computational Physics, Vol. 229, Issue 3
Overview of Materials Qualification Needs for Metal Additive Manufacturing
journal, January 2016
- Seifi, Mohsen; Salem, Ayman; Beuth, Jack
- JOM, Vol. 68, Issue 3
Additive manufacturing and its societal impact: a literature review
journal, October 2012
- Huang, Samuel H.; Liu, Peng; Mokasdar, Abhiram
- The International Journal of Advanced Manufacturing Technology, Vol. 67, Issue 5-8
Site specific control of crystallographic grain orientation through electron beam additive manufacturing
journal, November 2014
- Dehoff, R. R.; Kirka, M. M.; Sames, W. J.
- Materials Science and Technology, Vol. 31, Issue 8
Metal Additive Manufacturing: A Review
journal, April 2014
- Frazier, William E.
- Journal of Materials Engineering and Performance, Vol. 23, Issue 6
Heat treating and melting material with a scanning laser or electron beam
journal, September 1977
- Cline, H. E.; Anthony, T. R.
- Journal of Applied Physics, Vol. 48, Issue 9
Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys
journal, October 2017
- Keller, Trevor; Lindwall, Greta; Ghosh, Supriyo
- Acta Materialia, Vol. 139