skip to main content
DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Absolute Hugoniot measurements from a spherically convergent shock using x-ray radiography

Abstract

Here, the canonical high pressure equation of state measurement is to induce a shock wave in the sample material and measure two mechanical properties of the shocked material or shock wave. For accurate measurements, the experiment is normally designed to generate a planar shock which is as steady as possible in space and time, and a single state is measured. A converging shock strengthens as it propagates, so a range of shock pressures is induced in a single experiment. However, equation of state measurements must then account for spatial and temporal gradients. We have used x-ray radiography of spherically converging shocks to determine states along the shock Hugoniot. The radius-time history of the shock, and thus its speed, was measured by radiographing the position of the shock front as a function of time using an x-ray streak camera. The density profile of the shock was then inferred from the x-ray transmission at each instant of time. Simultaneous measurement of the density at the shock front and the shock speed determines an absolute mechanical Hugoniot state. The density profile was reconstructed using the known, unshocked density which strongly constrains the density jump at the shock front. The radiographic configuration and streakmore » camera behavior were treated in detail to reduce systematic errors. Measurements were performed on the Omega and National Ignition Facility lasers, using a hohlraum to induce a spatially uniform drive over the outside of a solid, spherical sample and a laser-heated thermal plasma as an x-ray source for radiography. Absolute shock Hugoniot measurements were demonstrated for carbon-containing samples of different composition and initial density, up to temperatures at which K-shell ionization reduced the opacity behind the shock. Here we present the experimental method using measurements of polystyrene as an example.« less

Authors:
 [1];  [1];  [2];  [1]; ORCiD logo [1];  [1];  [1]; ORCiD logo [1];  [3]; ORCiD logo [4]; ORCiD logo [5]; ORCiD logo [6];  [7]
  1. Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
  2. Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Washington State Univ., Pullman, WA (United States)
  3. Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Univ. of Rochester, Rochester, NY (United States)
  4. Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); SLAC National Accelerator Lab., Menlo Park, CA (United States)
  5. Atomic Weapons Establishment, Berkshire (United Kingdom)
  6. Univ. of California, Berkeley, CA (United States); Helmholtz Zentrum, Dresden (Germany)
  7. Univ. of California, Berkeley, CA (United States)
Publication Date:
Research Org.:
SLAC National Accelerator Lab., Menlo Park, CA (United States)
Sponsoring Org.:
USDOE
OSTI Identifier:
1458533
Alternate Identifier(s):
OSTI ID: 1437674
Grant/Contract Number:  
AC02-76SF00515; AC52-07NA27344
Resource Type:
Accepted Manuscript
Journal Name:
Review of Scientific Instruments
Additional Journal Information:
Journal Volume: 89; Journal Issue: 5; Journal ID: ISSN 0034-6748
Publisher:
American Institute of Physics (AIP)
Country of Publication:
United States
Language:
English
Subject:
47 OTHER INSTRUMENTATION

Citation Formats

Swift, Damian C., Kritcher, Andrea L., Hawreliak, James A., Lazicki, Amy, MacPhee, Andrew, Bachmann, Benjamin, Doppner, Tilo, Nilsen, Joseph, Collins, Gilbert W., Glenzer, Siegfried, Rothman, Stephen D., Kraus, Dominik, and Falcone, Roger W. Absolute Hugoniot measurements from a spherically convergent shock using x-ray radiography. United States: N. p., 2018. Web. doi:10.1063/1.5032142.
Swift, Damian C., Kritcher, Andrea L., Hawreliak, James A., Lazicki, Amy, MacPhee, Andrew, Bachmann, Benjamin, Doppner, Tilo, Nilsen, Joseph, Collins, Gilbert W., Glenzer, Siegfried, Rothman, Stephen D., Kraus, Dominik, & Falcone, Roger W. Absolute Hugoniot measurements from a spherically convergent shock using x-ray radiography. United States. doi:https://doi.org/10.1063/1.5032142
Swift, Damian C., Kritcher, Andrea L., Hawreliak, James A., Lazicki, Amy, MacPhee, Andrew, Bachmann, Benjamin, Doppner, Tilo, Nilsen, Joseph, Collins, Gilbert W., Glenzer, Siegfried, Rothman, Stephen D., Kraus, Dominik, and Falcone, Roger W. Fri . "Absolute Hugoniot measurements from a spherically convergent shock using x-ray radiography". United States. doi:https://doi.org/10.1063/1.5032142. https://www.osti.gov/servlets/purl/1458533.
@article{osti_1458533,
title = {Absolute Hugoniot measurements from a spherically convergent shock using x-ray radiography},
author = {Swift, Damian C. and Kritcher, Andrea L. and Hawreliak, James A. and Lazicki, Amy and MacPhee, Andrew and Bachmann, Benjamin and Doppner, Tilo and Nilsen, Joseph and Collins, Gilbert W. and Glenzer, Siegfried and Rothman, Stephen D. and Kraus, Dominik and Falcone, Roger W.},
abstractNote = {Here, the canonical high pressure equation of state measurement is to induce a shock wave in the sample material and measure two mechanical properties of the shocked material or shock wave. For accurate measurements, the experiment is normally designed to generate a planar shock which is as steady as possible in space and time, and a single state is measured. A converging shock strengthens as it propagates, so a range of shock pressures is induced in a single experiment. However, equation of state measurements must then account for spatial and temporal gradients. We have used x-ray radiography of spherically converging shocks to determine states along the shock Hugoniot. The radius-time history of the shock, and thus its speed, was measured by radiographing the position of the shock front as a function of time using an x-ray streak camera. The density profile of the shock was then inferred from the x-ray transmission at each instant of time. Simultaneous measurement of the density at the shock front and the shock speed determines an absolute mechanical Hugoniot state. The density profile was reconstructed using the known, unshocked density which strongly constrains the density jump at the shock front. The radiographic configuration and streak camera behavior were treated in detail to reduce systematic errors. Measurements were performed on the Omega and National Ignition Facility lasers, using a hohlraum to induce a spatially uniform drive over the outside of a solid, spherical sample and a laser-heated thermal plasma as an x-ray source for radiography. Absolute shock Hugoniot measurements were demonstrated for carbon-containing samples of different composition and initial density, up to temperatures at which K-shell ionization reduced the opacity behind the shock. Here we present the experimental method using measurements of polystyrene as an example.},
doi = {10.1063/1.5032142},
journal = {Review of Scientific Instruments},
number = 5,
volume = 89,
place = {United States},
year = {2018},
month = {5}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 5 works
Citation information provided by
Web of Science

Figures / Tables:

FIG. 1 FIG. 1: Schematic of the hohlraum-driven converging-shock experiment. Wedge diagram shows the sequence of shells comprising a spherical target bead.

Save / Share:

Works referenced in this record:

First High-Convergence Cryogenic Implosion in a Near-Vacuum Hohlraum
journal, April 2015


A new global equation of state model for hot, dense matter
journal, September 1995

  • Young, David A.; Corey, Ellen M.
  • Journal of Applied Physics, Vol. 78, Issue 6
  • DOI: 10.1063/1.359955

Computational methods in Lagrangian and Eulerian hydrocodes
journal, September 1992


Design and implementation of high magnification framing camera for NIF "ARIANE Light"
conference, October 2012

  • Ayers, Jay; Felker, Brian; Smalyuk, Vladimir
  • SPIE Optical Engineering + Applications, SPIE Proceedings
  • DOI: 10.1117/12.931299

Absolute Equation-of-State Data in the 10–40 Mbar (1–4 TPa) Regime
journal, February 1998


High-precision measurements of the equation of state of hydrocarbons at 1–10 Mbar using laser-driven shock waves
journal, May 2010

  • Barrios, M. A.; Hicks, D. G.; Boehly, T. R.
  • Physics of Plasmas, Vol. 17, Issue 5
  • DOI: 10.1063/1.3358144

Quasi-isentropic compressibility of a strongly nonideal deuterium plasma at pressures of up to 5500 GPa: Nonideality and degeneracy effects
journal, March 2017

  • Mochalov, M. A.; Il’kaev, R. I.; Fortov, V. E.
  • Journal of Experimental and Theoretical Physics, Vol. 124, Issue 3
  • DOI: 10.1134/s1063776117020157

The ruby pressure standard to 150GPa
journal, December 2005

  • Chijioke, Akobuije D.; Nellis, W. J.; Soldatov, A.
  • Journal of Applied Physics, Vol. 98, Issue 11
  • DOI: 10.1063/1.2135877

Shock Hugoniot and temperature data for polystyrene obtained with quartz standard
journal, June 2009

  • Ozaki, N.; Sano, T.; Ikoma, M.
  • Physics of Plasmas, Vol. 16, Issue 6
  • DOI: 10.1063/1.3152287

Probing matter at Gbar pressures at the NIF
journal, March 2014


Design and simulations of indirect drive ignition targets for NIF
journal, November 2004


Early-Time Symmetry Tuning in the Presence of Cross-Beam Energy Transfer in ICF Experiments on the National Ignition Facility
journal, December 2013


    Works referencing / citing this record:

    Atom-in-jellium equations of state in the high-energy-density regime
    journal, June 2019


    Atom-in-jellium equations of state in the high-energy-density regime
    journal, June 2019


    Equation of state of boron nitride combining computation, modeling, and experiment
    journal, April 2019


    Absolute Equation-of-State Measurement for Polystyrene from 25 to 60 Mbar Using a Spherically Converging Shock Wave
    journal, July 2018