A coupled, multiphase heat flux boundary condition for the discrete element method
Abstract
Similar to single-phase flows, multiphase systems with a constant heat flux at the wall are common in practice. Unlike single-phase flows, however, the numerical implementation of a constant boundary flux is non-trivial due to the coupling between phases – i.e., the partition of the total flux between the phases can vary in space and time. A numerical technique for modeling such a boundary condition is proposed here and verified via simulations of gas-solid flows. While discrete-particle simulations of monodisperse particles are considered in this report, the technique can be extended to include radiation, polydisperse systems, and/or a continuum representation of the solids phase.
- Authors:
-
- University of Colorado, Boulder, CO (United States)
- Publication Date:
- Research Org.:
- Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Univ. of Colorado, Boulder, CO (United States)
- Sponsoring Org.:
- USDOE Office of Science (SC); USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- OSTI Identifier:
- 1533611
- Alternate Identifier(s):
- OSTI ID: 1437496
- Grant/Contract Number:
- EE0005954; AC05-00OR2272
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Chemical Engineering Journal
- Additional Journal Information:
- Journal Volume: 304; Journal Issue: C; Journal ID: ISSN 1385-8947
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 42 ENGINEERING; DEM; heat transfer; boundary conditions
Citation Formats
Lattanzi, Aaron M., and Hrenya, Christine M. A coupled, multiphase heat flux boundary condition for the discrete element method. United States: N. p., 2016.
Web. doi:10.1016/j.cej.2016.07.004.
Lattanzi, Aaron M., & Hrenya, Christine M. A coupled, multiphase heat flux boundary condition for the discrete element method. United States. https://doi.org/10.1016/j.cej.2016.07.004
Lattanzi, Aaron M., and Hrenya, Christine M. Sat .
"A coupled, multiphase heat flux boundary condition for the discrete element method". United States. https://doi.org/10.1016/j.cej.2016.07.004. https://www.osti.gov/servlets/purl/1533611.
@article{osti_1533611,
title = {A coupled, multiphase heat flux boundary condition for the discrete element method},
author = {Lattanzi, Aaron M. and Hrenya, Christine M.},
abstractNote = {Similar to single-phase flows, multiphase systems with a constant heat flux at the wall are common in practice. Unlike single-phase flows, however, the numerical implementation of a constant boundary flux is non-trivial due to the coupling between phases – i.e., the partition of the total flux between the phases can vary in space and time. A numerical technique for modeling such a boundary condition is proposed here and verified via simulations of gas-solid flows. While discrete-particle simulations of monodisperse particles are considered in this report, the technique can be extended to include radiation, polydisperse systems, and/or a continuum representation of the solids phase.},
doi = {10.1016/j.cej.2016.07.004},
journal = {Chemical Engineering Journal},
number = C,
volume = 304,
place = {United States},
year = {Sat Jul 02 00:00:00 EDT 2016},
month = {Sat Jul 02 00:00:00 EDT 2016}
}
Free Publicly Available Full Text
Publisher's Version of Record
Other availability
Cited by: 18 works
Citation information provided by
Web of Science
Web of Science
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
Constant wall heat flux boundary conditions in porous media under local thermal non-equilibrium conditions
journal, July 2002
- Alazmi, Bader; Vafai, Kambiz
- International Journal of Heat and Mass Transfer, Vol. 45, Issue 15
Effects of Boundary Conditions on Non-Darcian heat Transfer Through Porous Media and Experimental Comparisons
journal, June 1995
- Amiri, A.; Vafai, K.; Kuzay, T. M.
- Numerical Heat Transfer, Part A: Applications, Vol. 27, Issue 6
Fluid Mechanical Description of Fluidized Beds. Equations of Motion
journal, November 1967
- Anderson, T. B.; Jackson, Roy
- Industrial & Engineering Chemistry Fundamentals, Vol. 6, Issue 4
Thermal or Electrical Conduction Through a Granular Material
journal, July 1977
- Batchelor, G. K.; O'Brien, R. W.
- Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 355, Issue 1682
Modeling of heat transfer in granular flow in rotating vessels
journal, October 2006
- Chaudhuri, Bodhisattwa; Muzzio, Fernando J.; Tomassone, M. Silvina
- Chemical Engineering Science, Vol. 61, Issue 19
Heat transfer of gas–solid two-phase mixtures flowing through a packed bed under constant wall heat flux conditions
journal, May 2007
- Cong, Thang Ngoc; He, Yurong; Chen, Haisheng
- Chemical Engineering Journal, Vol. 130, Issue 1
A discrete numerical model for granular assemblies
journal, March 1979
- Cundall, P. A.; Strack, O. D. L.
- Géotechnique, Vol. 29, Issue 1
Review of discrete particle modeling of fluidized beds
journal, January 2007
- Deen, N. G.; Van Sint Annaland, M.; Van der Hoef, M. A.
- Chemical Engineering Science, Vol. 62, Issue 1-2
Prediction of conductive heating time scales of particles in a rotary drum
journal, October 2016
- Emady, Heather N.; Anderson, Kellie V.; Borghard, William G.
- Chemical Engineering Science, Vol. 152
Transfer of heat or mass to particles in fixed and fluidised beds
journal, April 1978
- Gunn, D. J.
- International Journal of Heat and Mass Transfer, Vol. 21, Issue 4
Numerical calculation of wall-to-bed heat-transfer coefficients in gas-fluidized beds
journal, July 1992
- Kuipers, J. A. M.; Prins, W.; Van Swaaij, W. P. M.
- AIChE Journal, Vol. 38, Issue 7
Simulations of heat transfer to solid particles flowing through an array of heated tubes
journal, June 2016
- Morris, A. B.; Ma, Z.; Pannala, S.
- Solar Energy, Vol. 130
A conductive heat transfer model for particle flows over immersed surfaces
journal, October 2015
- Morris, A. B.; Pannala, S.; Ma, Z.
- International Journal of Heat and Mass Transfer, Vol. 89
Development of soft-sphere contact models for thermal heat conduction in granular flows
journal, June 2016
- Morris, A. B.; Pannala, S.; Ma, Z.
- AIChE Journal, Vol. 62, Issue 12
Development and verification of a resolved 3D inner particle heat transfer model for the Discrete Element Method (DEM)
journal, April 2016
- Oschmann, T.; Schiemann, M.; Kruggel-Emden, H.
- Powder Technology, Vol. 291
A study of heat transfer in fluidized beds using an integrated DIA/PIV/IR technique
journal, January 2015
- Patil, Amit V.; Peters, E. A. J. F.; Sutkar, Vinayak S.
- Chemical Engineering Journal, Vol. 259
Wall-to-bed heat transfer in gas-solid bubbling fluidized beds
journal, January 2005
- Patil, D. J.; Smit, J.; van Sint Annaland, M.
- AIChE Journal, Vol. 52, Issue 1
Heat transfer in rotary kilns with interstitial gases
journal, September 2008
- Shi, Deliang; Vargas, Watson L.; McCarthy, J. J.
- Chemical Engineering Science, Vol. 63, Issue 18
Comparison of soft-sphere models to measurements of collision properties during normal impacts
journal, July 2005
- Stevens, A. B.; Hrenya, C. M.
- Powder Technology, Vol. 154, Issue 2-3
Hydrodynamics of fluidization: Prediction of wall to bed heat transfer coefficients
journal, January 1985
- Syamlal, M.; Gidaspow, Dimitri
- AIChE Journal, Vol. 31, Issue 1
Conductivity of granular media with stagnant interstitial fluids via thermal particle dynamics simulation
journal, November 2002
- Vargas, Watson L.; McCarthy, J. J.
- International Journal of Heat and Mass Transfer, Vol. 45, Issue 24
Heat conduction in granular materials
journal, May 2001
- Vargas, Watson L.; McCarthy, J. J.
- AIChE Journal, Vol. 47, Issue 5
Particle scale study of heat transfer in packed and bubbling fluidized beds
journal, April 2009
- Zhou, Z. Y.; Yu, A. B.; Zulli, P.
- AIChE Journal, Vol. 55, Issue 4