Partial flocculation for spray drying of spherical mixed metal oxide particles

Ehrhart, Brian D.; Ward, Barbara J.; Richardson, Benjamin M.; Anseth, Kristi S.; Weimer, Alan W.

doi:10.1111/jace.15727

Title: Partial flocculation for spray drying of spherical mixed metal oxide particles

Authors:

^[1]; Ward, Barbara J. ^[1]; Richardson, Benjamin M. ^[2]; Anseth, Kristi S. ^[2];

^[1]

Department of Chemical and Biological Engineering University of Colorado at Boulder Boulder Colorado
Department of Chemical and Biological Engineering University of Colorado at Boulder Boulder Colorado, The BioFrontiers Institute University of Colorado at Boulder Boulder Colorado

Publication Date:: 2018-05-16

Sponsoring Org.:: USDOE

OSTI Identifier:: 1437322

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Journal of the American Ceramic Society

Additional Journal Information:: Journal Name: Journal of the American Ceramic Society Journal Volume: 101 Journal Issue: 10; Journal ID: ISSN 0002-7820

Publisher:: Wiley-Blackwell

Country of Publication:: United States

Language:: English

Citation Formats


                    Ehrhart, Brian D., Ward, Barbara J., Richardson, Benjamin M., Anseth, Kristi S., and Weimer, Alan W. Partial flocculation for spray drying of spherical mixed metal oxide particles.  United States: N. p., 2018. 
Web.  doi:10.1111/jace.15727.

Copy to clipboard


                    Ehrhart, Brian D., Ward, Barbara J., Richardson, Benjamin M., Anseth, Kristi S., & Weimer, Alan W. Partial flocculation for spray drying of spherical mixed metal oxide particles.  United States.  https://doi.org/10.1111/jace.15727

Copy to clipboard


                    Ehrhart, Brian D., Ward, Barbara J., Richardson, Benjamin M., Anseth, Kristi S., and Weimer, Alan W. Wed .  
"Partial flocculation for spray drying of spherical mixed metal oxide particles".  United States.  https://doi.org/10.1111/jace.15727.

Copy to clipboard


                    
@article{osti_1437322,

  title        = {Partial flocculation for spray drying of spherical mixed metal oxide particles},

  author       = {Ehrhart, Brian D. and Ward, Barbara J. and Richardson, Benjamin M. and Anseth, Kristi S. and Weimer, Alan W.},

  abstractNote = {},

  doi          = {10.1111/jace.15727},

  journal      = {Journal of the American Ceramic Society},

  number       = 10,

  volume       = 101,

  place        = {United States},

  year         = {2018},

  month        = {5}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1111/jace.15727

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 1 work

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Long-term integrity testing of spray-dried particles in a 10-kW chemical-looping combustor using natural gas as fuel
journal, November 2009

Linderholm, Carl; Mattisson, Tobias; Lyngfelt, Anders
Fuel, Vol. 88, Issue 11
DOI: 10.1016/j.fuel.2008.12.018

Spray drying and sintering of zirconia based hollow powders
journal, September 2005

Roy, Priscille; Bertrand, Ghislaine; Coddet, Christian
Powder Technology, Vol. 157, Issue 1-3
DOI: 10.1016/j.powtec.2005.05.031

Chemical Looping Combustion and Chemical Looping with Oxygen Uncoupling Experiments in a Batch Reactor Using Spray-Dried CaMn _{1– x} M _x O _3−δ (M = Ti, Fe, Mg) Particles as Oxygen Carriers
journal, March 2013

Hallberg, Peter; Jing, Dazheng; Rydén, Magnus
Energy & Fuels, Vol. 27, Issue 3
DOI: 10.1021/ef3013618

Progress in developing spray-drying methods for the production of controlled morphology particles: From the nanometer to submicrometer size ranges
journal, January 2011

Nandiyanto, Asep Bayu Dani; Okuyama, Kikuo
Advanced Powder Technology, Vol. 22, Issue 1
DOI: 10.1016/j.apt.2010.09.011

Parameters for spray drying ZnO nanopowders as spherical granules
journal, September 2017

Yıldız, Ömer; Soydan, Ali Murat
Journal of the American Ceramic Society, Vol. 101, Issue 1
DOI: 10.1111/jace.15191

Influence of slurry characteristics on the morphology of spray-dried alumina powders
journal, February 2003

Bertrand, G.; Filiatre, C.; Mahdjoub, H.
Journal of the European Ceramic Society, Vol. 23, Issue 2
DOI: 10.1016/S0955-2219(02)00171-1

Optimized Slurries for Spray Drying: Different Approaches to Obtain Homogeneous and Deformable Alumina-Zirconia Granules
journal, November 2013

Naglieri, Valentina; Gutknecht, Dan; Garnier, Vincent
Materials, Vol. 6, Issue 11
DOI: 10.3390/ma6115382

Spray-dried ceramic powders: A quantitative correlation between slurry characteristics and shapes of the granules
journal, January 2005

Bertrand, G.; Roy, P.; Filiatre, C.
Chemical Engineering Science, Vol. 60, Issue 1
DOI: 10.1016/j.ces.2004.04.042

Elaboration of boehmite nano-powders by spray-pyrolysis
journal, March 2009

Caiut, J. M. A.; Dexpert-Ghys, J.; Kihn, Y.
Powder Technology, Vol. 190, Issue 1-2
DOI: 10.1016/j.powtec.2008.04.054

Influence of Slurry Parameters on the Characteristics of Spray-Dried Granules
journal, July 1999

Walker, William J.; Reed, James S.; Verma, Surendra K.
Journal of the American Ceramic Society, Vol. 82, Issue 7
DOI: 10.1111/j.1151-2916.1999.tb01990.x

Spray-Drying Ceramic Powders
journal, April 1989

Lukasiewicz, Stanley J.
Journal of the American Ceramic Society, Vol. 72, Issue 4
DOI: 10.1111/j.1151-2916.1989.tb06184.x

Simulation of the Spray Drying of Single Granules: The Correlation Between Microscopic Forces and Granule Morphology
journal, March 2015

Breinlinger, Thomas; Hashibon, Adham; Kraft, Torsten
Journal of the American Ceramic Society, Vol. 98, Issue 6
DOI: 10.1111/jace.13557

A review on solar thermal syngas production via redox pair-based water/carbon dioxide splitting thermochemical cycles
journal, February 2015

Agrafiotis, Christos; Roeb, Martin; Sattler, Christian
Renewable and Sustainable Energy Reviews, Vol. 42
DOI: 10.1016/j.rser.2014.09.039

The effect of the slurry formulation upon the morphology of spray-dried yttria stabilised zirconia particles
journal, September 2003

Mahdjoub, H.; Roy, P.; Filiatre, C.
Journal of the European Ceramic Society, Vol. 23, Issue 10
DOI: 10.1016/S0955-2219(02)00412-0

Similar Records in DOE PAGES and OSTI.GOV collections:

Method for making fine and ultrafine spherical particles of zirconium titanate and other mixed metal oxide systems

Patent Hu, Michael Z.

Disclosed is a method for making amorphous spherical particles of zirconium titanate and crystalline spherical particles of zirconium titanate comprising the steps of mixing an aqueous solution of zirconium salt and an aqueous solution of titanium salt into a mixed solution having equal moles of zirconium and titanium and having a total salt concentration in the range from 0.01 M to about 0.5 M. A stearic dispersant and an organic solvent is added to the mixed salt solution, subjecting the zirconium salt and the titanium salt in the mixed solution to a coprecipitation reaction forming a solution containing amorphous sphericalmore »« less
Full Text Available
Comparison of partial oxidation and steam-CO{sub 2} mixed reforming of CH{sub 4} to syngas on MgO-supported metals

Journal Article Qin, D ; Lapszewicz, J ; Jiang, X - Journal of Catalysis

Partial oxidation (POX) and steam-CO{sub 2} mixed reforming of CH{sub 4} on MgO-supported noble metals were investigated at high space velocity (5.5 x 10{sup 5} h{sup -1}). Temperature-programmed reaction (TPR) and isotope transient techniques were used to study the mechanism of POX and mixed reforming. TPR profiles of POX and mixed reforming showed similar ignition reaction behaviors, which implied that there are similar characteristics in their mechanisms. Steam reforming and CO{sub 2} reforming were found to start at the same time in mixed reforming. TPR and CH{sub 4}-D{sub 2} exchange experiments indicated that CH{sub 4} was activated at low temperaturemore »« less
https://doi.org/10.1006/jcat.1996.0073
The influence of particle size in flocculation phenomena of mixed particles of quartz and fluorite in aqueous suspension

Conference Sukeyuki, Mori ; Tsuyoshi, Hara ; Takashi, Furuyama ; ...

In mineral processing practice, flocculation is largely established as an engineering technique of waste water treatment and the study of parameters increasing the settling velocity of particles is still of great importance to improve the process. Further investigations were made using quartz (Q89) and fluorite samples (F91) which included 58.8% and 65.8% of {minus}2.3 {micro}m particles respectively. In all the experiments the flocculation phenomena were observed varying the pH value of the aqueous suspension. In contrast to quartz particles (Q89) which did not flocculate for all pH values, it was, noticed that fluorite particles (F91) flocculated in the alkaline rangemore »« less
Method of making spherical metallic oxide and metallic carbide particles

Patent Zimmer, E

A method is described for making spherical metallic oxide and metallic carbide particles, especially particles consisting of fuel or breeder material such as oxide or carbide compounds of uranium, plutonium, thorium and the like with a diameter of from 0.1 to 1.5 millimeters, according to which an aqueous solution of a metallic nitrate or a metallic chloride or a mixture of metallic nitrates or metallic chlorides in which the metallic ions and anions are in a stoichiometric ratio to each other, is added dropwise to an organic phase. The method is characterized primarily in that the drops formed from themore »« less
Cryochemical method for forming spherical metal oxide particles from metal salt solutions

Patent Tinkle, M C

A method is described of preparing small metal oxide spheres cryochemically utilizing metal salts (e.g., nitrates) that cannot readily be dried and calcined without loss of sphericity of the particles. Such metal salts are cryochemically formed into small spheres, partially or completely converted to an insoluble salt, and dried and calcined. (Official Gazette)

Similar Records

Title: Partial flocculation for spray drying of spherical mixed metal oxide particles

Citation Formats

Long-term integrity testing of spray-dried particles in a 10-kW chemical-looping combustor using natural gas as fuel journal, November 2009

Spray drying and sintering of zirconia based hollow powders journal, September 2005

Chemical Looping Combustion and Chemical Looping with Oxygen Uncoupling Experiments in a Batch Reactor Using Spray-Dried CaMn 1– x M x O 3−δ (M = Ti, Fe, Mg) Particles as Oxygen Carriers journal, March 2013

Progress in developing spray-drying methods for the production of controlled morphology particles: From the nanometer to submicrometer size ranges journal, January 2011

Parameters for spray drying ZnO nanopowders as spherical granules journal, September 2017

Influence of slurry characteristics on the morphology of spray-dried alumina powders journal, February 2003

Optimized Slurries for Spray Drying: Different Approaches to Obtain Homogeneous and Deformable Alumina-Zirconia Granules journal, November 2013

Spray-dried ceramic powders: A quantitative correlation between slurry characteristics and shapes of the granules journal, January 2005

Elaboration of boehmite nano-powders by spray-pyrolysis journal, March 2009

Influence of Slurry Parameters on the Characteristics of Spray-Dried Granules journal, July 1999

Spray-Drying Ceramic Powders journal, April 1989

Simulation of the Spray Drying of Single Granules: The Correlation Between Microscopic Forces and Granule Morphology journal, March 2015

A review on solar thermal syngas production via redox pair-based water/carbon dioxide splitting thermochemical cycles journal, February 2015

The effect of the slurry formulation upon the morphology of spray-dried yttria stabilised zirconia particles journal, September 2003

Long-term integrity testing of spray-dried particles in a 10-kW chemical-looping combustor using natural gas as fuel
journal, November 2009

Spray drying and sintering of zirconia based hollow powders
journal, September 2005

Chemical Looping Combustion and Chemical Looping with Oxygen Uncoupling Experiments in a Batch Reactor Using Spray-Dried CaMn _{1– x} M _x O _3−δ (M = Ti, Fe, Mg) Particles as Oxygen Carriers
journal, March 2013

Progress in developing spray-drying methods for the production of controlled morphology particles: From the nanometer to submicrometer size ranges
journal, January 2011

Parameters for spray drying ZnO nanopowders as spherical granules
journal, September 2017

Influence of slurry characteristics on the morphology of spray-dried alumina powders
journal, February 2003

Optimized Slurries for Spray Drying: Different Approaches to Obtain Homogeneous and Deformable Alumina-Zirconia Granules
journal, November 2013

Spray-dried ceramic powders: A quantitative correlation between slurry characteristics and shapes of the granules
journal, January 2005

Elaboration of boehmite nano-powders by spray-pyrolysis
journal, March 2009

Influence of Slurry Parameters on the Characteristics of Spray-Dried Granules
journal, July 1999

Spray-Drying Ceramic Powders
journal, April 1989

Simulation of the Spray Drying of Single Granules: The Correlation Between Microscopic Forces and Granule Morphology
journal, March 2015

A review on solar thermal syngas production via redox pair-based water/carbon dioxide splitting thermochemical cycles
journal, February 2015

The effect of the slurry formulation upon the morphology of spray-dried yttria stabilised zirconia particles
journal, September 2003