skip to main content

DOE PAGESDOE PAGES

Title: A compact linear accelerator based on a scalable microelectromechanical-system RF-structure

Here, a new approach for a compact radio-frequency (RF) accelerator structure is presented. The new accelerator architecture is based on the Multiple Electrostatic Quadrupole Array Linear Accelerator (MEQALAC) structure that was first developed in the 1980s. The MEQALAC utilized RF resonators producing the accelerating fields and providing for higher beam currents through parallel beamlets focused using arrays of electrostatic quadrupoles (ESQs). While the early work obtained ESQs with lateral dimensions on the order of a few centimeters, using a printed circuit board (PCB), we reduce the characteristic dimension to the millimeter regime, while massively scaling up the potential number of parallel beamlets. Using Microelectromechanical systems scalable fabrication approaches, we are working on further red ucing the characteristic dimension to the sub-millimeter regime. The technology is based on RF-acceleration components and ESQs implemented in the PCB or silicon wafers where each beamlet passes through beam apertures in the wafer. The complete accelerator is then assembled by stacking these wafers. This approach has the potential for fast and inexpensive batch fabrication of the components and flexibility in system design for application specific beam energies and currents. For prototyping the accelerator architecture, the components have been fabricated using the PCB. In this paper,more » we present proof of concept results of the principal components using the PCB: RF acceleration and ESQ focusing. Finally, ongoing developments on implementing components in silicon and scaling of the accelerator technology to high currents and beam energies are discussed.« less
Authors:
ORCiD logo [1] ;  [1] ;  [1] ;  [1] ;  [1] ;  [1] ;  [2] ;  [2] ; ORCiD logo [2] ; ORCiD logo [2]
  1. Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
  2. Cornell Univ., Ithaca, NY (United States). SonicMEMS Laboratory
Publication Date:
Grant/Contract Number:
AC02-05CH11231
Type:
Accepted Manuscript
Journal Name:
Review of Scientific Instruments
Additional Journal Information:
Journal Volume: 88; Journal Issue: 6; Journal ID: ISSN 0034-6748
Publisher:
American Institute of Physics (AIP)
Research Org:
Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
Sponsoring Org:
USDOE Advanced Research Projects Agency - Energy (ARPA-E)
Country of Publication:
United States
Language:
English
Subject:
43 PARTICLE ACCELERATORS; 47 OTHER INSTRUMENTATION
OSTI Identifier:
1436154
Alternate Identifier(s):
OSTI ID: 1361922

Persaud, A., Ji, Q., Feinberg, E., Seidl, P. A., Waldron, W. L., Schenkel, T., Lal, A., Vinayakumar, K. B., Ardanuc, S., and Hammer, D. A.. A compact linear accelerator based on a scalable microelectromechanical-system RF-structure. United States: N. p., Web. doi:10.1063/1.4984969.
Persaud, A., Ji, Q., Feinberg, E., Seidl, P. A., Waldron, W. L., Schenkel, T., Lal, A., Vinayakumar, K. B., Ardanuc, S., & Hammer, D. A.. A compact linear accelerator based on a scalable microelectromechanical-system RF-structure. United States. doi:10.1063/1.4984969.
Persaud, A., Ji, Q., Feinberg, E., Seidl, P. A., Waldron, W. L., Schenkel, T., Lal, A., Vinayakumar, K. B., Ardanuc, S., and Hammer, D. A.. 2017. "A compact linear accelerator based on a scalable microelectromechanical-system RF-structure". United States. doi:10.1063/1.4984969. https://www.osti.gov/servlets/purl/1436154.
@article{osti_1436154,
title = {A compact linear accelerator based on a scalable microelectromechanical-system RF-structure},
author = {Persaud, A. and Ji, Q. and Feinberg, E. and Seidl, P. A. and Waldron, W. L. and Schenkel, T. and Lal, A. and Vinayakumar, K. B. and Ardanuc, S. and Hammer, D. A.},
abstractNote = {Here, a new approach for a compact radio-frequency (RF) accelerator structure is presented. The new accelerator architecture is based on the Multiple Electrostatic Quadrupole Array Linear Accelerator (MEQALAC) structure that was first developed in the 1980s. The MEQALAC utilized RF resonators producing the accelerating fields and providing for higher beam currents through parallel beamlets focused using arrays of electrostatic quadrupoles (ESQs). While the early work obtained ESQs with lateral dimensions on the order of a few centimeters, using a printed circuit board (PCB), we reduce the characteristic dimension to the millimeter regime, while massively scaling up the potential number of parallel beamlets. Using Microelectromechanical systems scalable fabrication approaches, we are working on further red ucing the characteristic dimension to the sub-millimeter regime. The technology is based on RF-acceleration components and ESQs implemented in the PCB or silicon wafers where each beamlet passes through beam apertures in the wafer. The complete accelerator is then assembled by stacking these wafers. This approach has the potential for fast and inexpensive batch fabrication of the components and flexibility in system design for application specific beam energies and currents. For prototyping the accelerator architecture, the components have been fabricated using the PCB. In this paper, we present proof of concept results of the principal components using the PCB: RF acceleration and ESQ focusing. Finally, ongoing developments on implementing components in silicon and scaling of the accelerator technology to high currents and beam energies are discussed.},
doi = {10.1063/1.4984969},
journal = {Review of Scientific Instruments},
number = 6,
volume = 88,
place = {United States},
year = {2017},
month = {6}
}