Superplastic Creep of Metal Nanowires From Rate-Dependent Plasticity Transition

Tao, Weiwei; Cao, Penghui; Park, Harold S.

doi:10.1021/acsnano.8b02199

Title: Superplastic Creep of Metal Nanowires From Rate-Dependent Plasticity Transition

Abstract

Understanding the time-dependent mechanical behavior of nanomaterials such as nanowires is essential to predict their reliability in nanomechanical devices. This understanding is typically obtained using creep tests, which are the most fundamental loading mechanism by which the time dependent deformation of materials is characterized. However, due to existing challenges facing both experimentalists and theorists, the time dependent mechanical response of nanowires is not well-understood. Here, we use atomistic simulations that can access experimental time scales to examine the creep of single-crystal face-centered cubic metal (Cu, Ag, Pt) nanowires. Here, we report that both Cu and Ag nanowires show significantly increased ductility and superplasticity under low creep stresses, where the superplasticity is driven by a rate-dependent transition in defect nucleation from twinning to trailing partial dislocations at the micro- or millisecond time scale. The transition in the deformation mechanism also governs a corresponding transition in the stress-dependent creep time at the microsecond (Ag) and millisecond (Cu) time scales. Overall, this work demonstrates the necessity of accessing time scales that far exceed those seen in conventional atomistic modeling for accurate insights into the time-dependent mechanical behavior and properties of nanomaterials.

Authors:

Tao, Weiwei ^[1]; Cao, Penghui ^[2];

^[1]

Boston Univ., MA (United States). Dept. of Mechanical Engineering
Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States). Dept. of Nuclear Science and Engineering

Publication Date:: Mon Apr 30 00:00:00 EDT 2018

Research Org.:: Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

Sponsoring Org.:: USDOE

OSTI Identifier:: 1435426

Grant/Contract Number:: NE0008450

Resource Type:: Accepted Manuscript

Journal Name:: ACS Nano

Additional Journal Information:: Journal Volume: 12; Journal Issue: 5; Journal ID: ISSN 1936-0851

Publisher:: American Chemical Society (ACS)

Country of Publication:: United States

Language:: English

Subject:: 77 NANOSCIENCE AND NANOTECHNOLOGY; nanowire; superplasticity; creep; rate-dependent deformation; self-learning metabasin escape algorithm

Citation Formats


                    Tao, Weiwei, Cao, Penghui, and Park, Harold S. Superplastic Creep of Metal Nanowires From Rate-Dependent Plasticity Transition.  United States: N. p., 2018. 
Web.  doi:10.1021/acsnano.8b02199.

Copy to clipboard


                    Tao, Weiwei, Cao, Penghui, & Park, Harold S. Superplastic Creep of Metal Nanowires From Rate-Dependent Plasticity Transition.  United States.  https://doi.org/10.1021/acsnano.8b02199

Copy to clipboard


                    Tao, Weiwei, Cao, Penghui, and Park, Harold S. Mon .  
"Superplastic Creep of Metal Nanowires From Rate-Dependent Plasticity Transition".  United States.  https://doi.org/10.1021/acsnano.8b02199.  https://www.osti.gov/servlets/purl/1435426.

Copy to clipboard


                    
@article{osti_1435426,

  title        = {Superplastic Creep of Metal Nanowires From Rate-Dependent Plasticity Transition},

  author       = {Tao, Weiwei and Cao, Penghui and Park, Harold S.},

  abstractNote = {Understanding the time-dependent mechanical behavior of nanomaterials such as nanowires is essential to predict their reliability in nanomechanical devices. This understanding is typically obtained using creep tests, which are the most fundamental loading mechanism by which the time dependent deformation of materials is characterized. However, due to existing challenges facing both experimentalists and theorists, the time dependent mechanical response of nanowires is not well-understood. Here, we use atomistic simulations that can access experimental time scales to examine the creep of single-crystal face-centered cubic metal (Cu, Ag, Pt) nanowires. Here, we report that both Cu and Ag nanowires show significantly increased ductility and superplasticity under low creep stresses, where the superplasticity is driven by a rate-dependent transition in defect nucleation from twinning to trailing partial dislocations at the micro- or millisecond time scale. The transition in the deformation mechanism also governs a corresponding transition in the stress-dependent creep time at the microsecond (Ag) and millisecond (Cu) time scales. Overall, this work demonstrates the necessity of accessing time scales that far exceed those seen in conventional atomistic modeling for accurate insights into the time-dependent mechanical behavior and properties of nanomaterials.},

  doi          = {10.1021/acsnano.8b02199},

  journal      = {ACS Nano},

  number       = 5,

  volume       = 12,

  place        = {United States},

  year         = {Mon Apr 30 00:00:00 EDT 2018},

  month        = {Mon Apr 30 00:00:00 EDT 2018}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (DOE)

Publisher's Version of Record

https://doi.org/10.1021/acsnano.8b02199

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 4 works

Citation information provided by
Web of Science

Figures / Tables:

Figure 1.: Representative creep curve (strain ε vs time) for a Cu nanowire subject to a creep stress of 0.59σ_y at room temperature using the SLME approach.

All figures and tables (9 total)

Save / Share:

Export Metadata

Save to My Library

Figures / Tables found in this record:

Figures/Tables have been extracted from DOE-funded journal article accepted manuscripts.

Similar Records in DOE PAGES and OSTI.GOV collections:

Mechanical and microstructural characteristics of an Al-Li-Cu-Zr alloy during superplastic deformation

Miscellaneous Ren, B

If the above alloys are heavily cold- or warm-worked prior to superplastic deformation, they are resistant to static recrystallization but dynamically recrystallize with a clear strain dependence, and are superplastic deformable at relative high strain rates in the approximate range of 10{sup {minus}3} to 10{sup {minus}1} s{sup {minus}1}. The microstructural source of superplasticity has been the subject of less-detailed study than the more classical fully recrystallized materials. In this study, an effort was made to provide a somewhat greater insight into the mechanical behavior during the dynamic recrystallization of an Al-Li-Cu-Zr alloy, and to relate the mechanical behavior to themore »« less
Region 1 deformation mechanisms in high strain rate superplastic IN9021

Conference Bieler, T R ; Mukherjee, A K

The deformation mechanisms for region 1 deformation in high rate superplastic mechanically alloyed IN9021 were analyzed using creep and superplastic data. Three threshold stresses are identified, an apparent threshold stress at the lowest superplastic strain rate, and two threshold stresses obtained by extrapolation of the superplastic data using stress exponents of n = 2 and n = 3. All of these threshold stresses are strongly temperature dependent. The deformation in region 1 has been identified as a transition between the superplastic deformation mechanism and a dislocation creep mechanism dependent upon thermally activated detachment of dislocations from particles. Region 1 deformationmore »« less
Grain size and temperature dependence of superplastic deformation in an Al-Mg alloy under isostructural condition

Journal Article Bae, D H ; Ghosh, A K - Acta Materialia

The mechanical behavior of a superplastic Al-4.7% Mg-0.8% Mn-0.4% Cu alloy has been characterized by a new type of step train-rate test which preserves the initial microstructure of the alloy (i.e. an isostructural test). Four different grain sizes of the alloy (8--30 {micro}m), prepared by variations in thermomechanical processing practice, were examined. A sigmoidal relationship between log {sigma} and log {dot {var_epsilon}} is observed for each isostructural condition. The value of maximum m (=dlog {sigma}/dlog {dot {var_epsilon}}) increased with increasing temperature and with decreasing grain size. The isostructural log {sigma} vs log {dot {var_epsilon}} data are evaluated using the grainmore »« less
https://doi.org/10.1016/S1359-6454(99)00445-0
Superplastic Creep of Eutectic Tin-Lead Solder Joints

Conference Mei, Z. ; Shine, M. C. ; Morris, Jr., J. W. - Journal of Electronic Packaging

The creep behavior of air-cooled and liquid nitrogen-quenched soldered joints of 60/40 Sn-Pb at 65°C has been studied. The stress exponent, n, in the power law, γ˙ (steady state strain rate) ∝σⁿ (applied stress), changes from a value of about 6 to values of 2 to 3, as γ˙ decreases below 10^-4 in/in per second. This result, combined with the authors’ previous stepped load creep test results, indicates a transition of the creep deformation mechanism from conventional dislocation climb to superplastic grain boundary sliding. The superplastic creep of the soldered joints is ascribed to their non-lamellar microstructure due to theirmore »« less
https://doi.org/10.1115/1.2905375

Full Text Available
The high temperature mechanical characteristics of superplastic 3 mol% yttria stabilized zirconia

Journal Article Owen, D M ; Chokshi, A H - Acta Materialia

A detailed study was undertaken to characterize the deformation behavior of a superplastic 3 mol% yttria-stabilized tetragonal zirconia (3YTZ) over a wide range of strain rates, temperatures and grain sizes. The experimental data were analyzed in terms of the following equation for high temperature deformation: SR {proportional_to} FS{sup n} d{sup {minus}p} exp({minus}Q/RT), where SR is the strain rate, FS is the flow stress, d is the grain size, Q is the activation energy, R is the gas constant, T is the absolute temperature, and n and p are constants termed the stress exponent and the inverse grain size exponent, respectively.more »« less
https://doi.org/10.1016/S1359-6454(97)00251-6

Similar Records