skip to main content

DOE PAGESDOE PAGES

This content will become publicly available on January 10, 2019

Title: Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel

The experimentally measured grain-orientation-dependent residual lattice strains, evolved in an interstitia-free steel after 70% cold rolling reduction, are studied by means of crystal elastic visco-plastic finite element simulations, which provides a very satisfactory prediction of deformation texture. The calculated residual lattice strain pole figure matches well with the experimentally measured counterpart within the highest density regions of major texture components observed. Both experimental evidence and results of modeling clearly indicate that the residual lattice strain is orientation dependent, based on comprehensive information on the evolution of residual lattice strain in various crystallographic orientations during plastic deformation. It appears that in a cold rolled material, there is a general correlation between the stresses developed just prior to unloading and the residual lattice strains in particular directions. Here, it is also shown that the cumulative plastic shear does not reveal a clear correlation with the components of residual lattice strain while presented in the normal correlation plot, however, this relationship can be better understood by means of the orientation distribution function of residual lattice strain, which can be derived from the neutron or X-ray diffraction experiments.
Authors:
ORCiD logo [1] ; ORCiD logo [2] ;  [3] ;  [4] ;  [5] ;  [6] ;  [7] ; ORCiD logo [1]
  1. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Chemical and Engineering Materials Division
  2. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Computational Sciences and Engineering Division
  3. Eotvos Lorand Univ., Budapest (Hungary). Savaria Inst. of Technology
  4. Tata Steel, IJmuiden Technology Centre, IJmuiden (The Netherlands)
  5. Univ of Science and Technology, Beijing (China). State Key Lab. for Advanced Metals and Materials (SKLAMM)
  6. RWTH Aachen Univ. (Germany). Steel Inst.
  7. Jiangsu Univ. of Science and Technology, Jiangsu (China). School of Electronics and Information
Publication Date:
Grant/Contract Number:
AC05-00OR22725; 51471032; 51231002; 06111020; 51571025
Type:
Accepted Manuscript
Journal Name:
Steel Research International
Additional Journal Information:
Journal Volume: 89; Journal Issue: 3; Journal ID: ISSN 1611-3683
Publisher:
Wiley
Research Org:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Sponsoring Org:
USDOE Laboratory Directed Research and Development (LDRD) Program; National Natural Science Foundation of China (NNSFC)
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; Grain orientation; IF steel; Lattice strain; Residual lattice strain; Rolling
OSTI Identifier:
1430621

Xie, Qingge, Gorti, Sarma B., Sidor, Jurij, An, Yuguo, Wang, Yandong, Lian, Junhe, Lan, Haoyu, and An, Ke. Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel. United States: N. p., Web. doi:10.1002/srin.201700408.
Xie, Qingge, Gorti, Sarma B., Sidor, Jurij, An, Yuguo, Wang, Yandong, Lian, Junhe, Lan, Haoyu, & An, Ke. Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel. United States. doi:10.1002/srin.201700408.
Xie, Qingge, Gorti, Sarma B., Sidor, Jurij, An, Yuguo, Wang, Yandong, Lian, Junhe, Lan, Haoyu, and An, Ke. 2018. "Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel". United States. doi:10.1002/srin.201700408.
@article{osti_1430621,
title = {Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel},
author = {Xie, Qingge and Gorti, Sarma B. and Sidor, Jurij and An, Yuguo and Wang, Yandong and Lian, Junhe and Lan, Haoyu and An, Ke},
abstractNote = {The experimentally measured grain-orientation-dependent residual lattice strains, evolved in an interstitia-free steel after 70% cold rolling reduction, are studied by means of crystal elastic visco-plastic finite element simulations, which provides a very satisfactory prediction of deformation texture. The calculated residual lattice strain pole figure matches well with the experimentally measured counterpart within the highest density regions of major texture components observed. Both experimental evidence and results of modeling clearly indicate that the residual lattice strain is orientation dependent, based on comprehensive information on the evolution of residual lattice strain in various crystallographic orientations during plastic deformation. It appears that in a cold rolled material, there is a general correlation between the stresses developed just prior to unloading and the residual lattice strains in particular directions. Here, it is also shown that the cumulative plastic shear does not reveal a clear correlation with the components of residual lattice strain while presented in the normal correlation plot, however, this relationship can be better understood by means of the orientation distribution function of residual lattice strain, which can be derived from the neutron or X-ray diffraction experiments.},
doi = {10.1002/srin.201700408},
journal = {Steel Research International},
number = 3,
volume = 89,
place = {United States},
year = {2018},
month = {1}
}