skip to main content

DOE PAGESDOE PAGES

This content will become publicly available on January 31, 2019

Title: Advancing the Fork detector for quantitative spent nuclear fuel verification

The Fork detector is widely used by the safeguards inspectorate of the European Atomic Energy Community (EURATOM) and the International Atomic Energy Agency (IAEA) to verify spent nuclear fuel. Fork measurements are routinely performed for safeguards prior to dry storage cask loading. Additionally, spent fuel verification will be required at the facilities where encapsulation is performed for acceptance in the final repositories planned in Sweden and Finland. The use of the Fork detector as a quantitative instrument has not been prevalent due to the complexity of correlating the measured neutron and gamma ray signals with fuel inventories and operator declarations. A spent fuel data analysis module based on the ORIGEN burnup code was recently implemented to provide automated real-time analysis of Fork detector data. This module allows quantitative predictions of expected neutron count rates and gamma units as measured by the Fork detectors using safeguards declarations and available reactor operating data. This study describes field testing of the Fork data analysis module using data acquired from 339 assemblies measured during routine dry cask loading inspection campaigns in Europe. Assemblies include both uranium oxide and mixed-oxide fuel assemblies. More recent measurements of 50 spent fuel assemblies at the Swedish Central Interimmore » Storage Facility for Spent Nuclear Fuel are also analyzed. An evaluation of uncertainties in the Fork measurement data is performed to quantify the ability of the data analysis module to verify operator declarations and to develop quantitative go/no-go criteria for safeguards verification measurements during cask loading or encapsulation operations. The goal of this approach is to provide safeguards inspectors with reliable real-time data analysis tools to rapidly identify discrepancies in operator declarations and to detect potential partial defects in spent fuel assemblies with improved reliability and minimal false positive alarms. Finally, the results are summarized, and sources and magnitudes of uncertainties are identified, and the impact of analysis uncertainties on the ability to confirm operator declarations is quantified.« less
Authors:
 [1] ;  [2] ;  [2] ;  [1] ;  [2] ;  [1] ;  [1] ;  [1] ;  [3] ;  [4] ;  [2]
  1. Euratom Safeguards Luxembourg (Luxembourg). European Commission. DG Energy
  2. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
  3. Swedish Nuclear Fuel and Waste Management Company, Stockholm (Sweden)
  4. Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
Publication Date:
Grant/Contract Number:
AC05-00OR22725
Type:
Accepted Manuscript
Journal Name:
Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment
Additional Journal Information:
Journal Volume: 888; Journal ID: ISSN 0168-9002
Publisher:
Elsevier
Research Org:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Sponsoring Org:
USDOE Office of Science (SC); USDOE National Nuclear Security Administration (NNSA), Office of Defense Nuclear Nonproliferation (NA-20); European Commission (EC)
Country of Publication:
United States
Language:
English
Subject:
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND TECHNOLOGY; 98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL PROTECTION; Fork detector; nondestructive assay; spent nuclear fuel; safeguards; ORIGEN; iRAP
OSTI Identifier:
1424458

Vaccaro, S., Gauld, I. C., Hu, J., De Baere, P., Peterson, J., Schwalbach, P., Smejkal, A., Tomanin, A., Sjöland, A., Tobin, S., and Wiarda, D.. Advancing the Fork detector for quantitative spent nuclear fuel verification. United States: N. p., Web. doi:10.1016/j.nima.2018.01.066.
Vaccaro, S., Gauld, I. C., Hu, J., De Baere, P., Peterson, J., Schwalbach, P., Smejkal, A., Tomanin, A., Sjöland, A., Tobin, S., & Wiarda, D.. Advancing the Fork detector for quantitative spent nuclear fuel verification. United States. doi:10.1016/j.nima.2018.01.066.
Vaccaro, S., Gauld, I. C., Hu, J., De Baere, P., Peterson, J., Schwalbach, P., Smejkal, A., Tomanin, A., Sjöland, A., Tobin, S., and Wiarda, D.. 2018. "Advancing the Fork detector for quantitative spent nuclear fuel verification". United States. doi:10.1016/j.nima.2018.01.066.
@article{osti_1424458,
title = {Advancing the Fork detector for quantitative spent nuclear fuel verification},
author = {Vaccaro, S. and Gauld, I. C. and Hu, J. and De Baere, P. and Peterson, J. and Schwalbach, P. and Smejkal, A. and Tomanin, A. and Sjöland, A. and Tobin, S. and Wiarda, D.},
abstractNote = {The Fork detector is widely used by the safeguards inspectorate of the European Atomic Energy Community (EURATOM) and the International Atomic Energy Agency (IAEA) to verify spent nuclear fuel. Fork measurements are routinely performed for safeguards prior to dry storage cask loading. Additionally, spent fuel verification will be required at the facilities where encapsulation is performed for acceptance in the final repositories planned in Sweden and Finland. The use of the Fork detector as a quantitative instrument has not been prevalent due to the complexity of correlating the measured neutron and gamma ray signals with fuel inventories and operator declarations. A spent fuel data analysis module based on the ORIGEN burnup code was recently implemented to provide automated real-time analysis of Fork detector data. This module allows quantitative predictions of expected neutron count rates and gamma units as measured by the Fork detectors using safeguards declarations and available reactor operating data. This study describes field testing of the Fork data analysis module using data acquired from 339 assemblies measured during routine dry cask loading inspection campaigns in Europe. Assemblies include both uranium oxide and mixed-oxide fuel assemblies. More recent measurements of 50 spent fuel assemblies at the Swedish Central Interim Storage Facility for Spent Nuclear Fuel are also analyzed. An evaluation of uncertainties in the Fork measurement data is performed to quantify the ability of the data analysis module to verify operator declarations and to develop quantitative go/no-go criteria for safeguards verification measurements during cask loading or encapsulation operations. The goal of this approach is to provide safeguards inspectors with reliable real-time data analysis tools to rapidly identify discrepancies in operator declarations and to detect potential partial defects in spent fuel assemblies with improved reliability and minimal false positive alarms. Finally, the results are summarized, and sources and magnitudes of uncertainties are identified, and the impact of analysis uncertainties on the ability to confirm operator declarations is quantified.},
doi = {10.1016/j.nima.2018.01.066},
journal = {Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment},
number = ,
volume = 888,
place = {United States},
year = {2018},
month = {1}
}