skip to main content
DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: A Printing-Centric Approach to the Electrostatic Modification of Polymer/Clay Composites for Use in 3D Direct-Ink Writing

Authors:
 [1];  [1];  [1];  [2];  [3];  [2];  [2];  [4];  [1]
  1. Department of Chemistry, University of Illinois at Urbana-Champaign, 600 S. Matthews Avenue Urbana IL 61801 USA
  2. X-ray Science Division, Advanced Photon Source, Argonne National Laboratory, 9700 South Cass Avenue Argonne IL 60439 USA
  3. Center for Nanoscale Materials, Argonne National Laboratory, 9700 South Cass Avenue Argonne IL 60439 USA
  4. Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Matthews Avenue Urbana IL 61801 USA
Publication Date:
Sponsoring Org.:
USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22)
OSTI Identifier:
1420185
Grant/Contract Number:  
AC02-06CH11357
Resource Type:
Publisher's Accepted Manuscript
Journal Name:
Advanced Materials Interfaces
Additional Journal Information:
Journal Name: Advanced Materials Interfaces Journal Volume: 5 Journal Issue: 8; Journal ID: ISSN 2196-7350
Publisher:
Wiley Blackwell (John Wiley & Sons)
Country of Publication:
Germany
Language:
English

Citation Formats

Rauzan, Brittany M., Lehman, Sean E., McCracken, Joselle M., Lee, Jonghun, Lin, Xiao-Min, Sandy, Alec, Narayanan, Suresh, Rogers, Simon A., and Nuzzo, Ralph G. A Printing-Centric Approach to the Electrostatic Modification of Polymer/Clay Composites for Use in 3D Direct-Ink Writing. Germany: N. p., 2018. Web. doi:10.1002/admi.201701579.
Rauzan, Brittany M., Lehman, Sean E., McCracken, Joselle M., Lee, Jonghun, Lin, Xiao-Min, Sandy, Alec, Narayanan, Suresh, Rogers, Simon A., & Nuzzo, Ralph G. A Printing-Centric Approach to the Electrostatic Modification of Polymer/Clay Composites for Use in 3D Direct-Ink Writing. Germany. doi:10.1002/admi.201701579.
Rauzan, Brittany M., Lehman, Sean E., McCracken, Joselle M., Lee, Jonghun, Lin, Xiao-Min, Sandy, Alec, Narayanan, Suresh, Rogers, Simon A., and Nuzzo, Ralph G. Mon . "A Printing-Centric Approach to the Electrostatic Modification of Polymer/Clay Composites for Use in 3D Direct-Ink Writing". Germany. doi:10.1002/admi.201701579.
@article{osti_1420185,
title = {A Printing-Centric Approach to the Electrostatic Modification of Polymer/Clay Composites for Use in 3D Direct-Ink Writing},
author = {Rauzan, Brittany M. and Lehman, Sean E. and McCracken, Joselle M. and Lee, Jonghun and Lin, Xiao-Min and Sandy, Alec and Narayanan, Suresh and Rogers, Simon A. and Nuzzo, Ralph G.},
abstractNote = {},
doi = {10.1002/admi.201701579},
journal = {Advanced Materials Interfaces},
number = 8,
volume = 5,
place = {Germany},
year = {2018},
month = {2}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record
DOI: 10.1002/admi.201701579

Citation Metrics:
Cited by: 1 work
Citation information provided by
Web of Science

Save / Share:

Works referenced in this record:

Introduction of pH-sensitivity into mechanically strong nanoclay composite hydrogels based on N -isopropylacrylamide
journal, October 2008

  • Mujumdar, Siddharthya K.; Siegel, Ronald A.
  • Journal of Polymer Science Part A: Polymer Chemistry, Vol. 46, Issue 19
  • DOI: 10.1002/pola.22973

Biomimetic 4D printing
journal, January 2016

  • Sydney Gladman, A.; Matsumoto, Elisabetta A.; Nuzzo, Ralph G.
  • Nature Materials, Vol. 15, Issue 4
  • DOI: 10.1038/nmat4544

Behaviour of LAPONITE® gels: Rheology, ageing, pH effect and phase state in the presence of dispersant
journal, September 2015


3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
journal, June 2015

  • Hong, Sungmin; Sycks, Dalton; Chan, Hon Fai
  • Advanced Materials, Vol. 27, Issue 27
  • DOI: 10.1002/adma.201501099

3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics
journal, September 2016

  • Minas, Clara; Carnelli, Davide; Tervoort, Elena
  • Advanced Materials, Vol. 28, Issue 45
  • DOI: 10.1002/adma.201603390

Polymeric thermal actuation using laminates based on polymer–clay nanocomposites
journal, January 2008

  • Chen, Biqiong; Liu, Shuo; Evans, Julian R. G.
  • Journal of Applied Polymer Science, Vol. 109, Issue 3
  • DOI: 10.1002/app.28224

A fresh look at the Laponite phase diagram
journal, January 2011

  • Ruzicka, Barbara; Zaccarelli, Emanuela
  • Soft Matter, Vol. 7, Issue 4
  • DOI: 10.1039/c0sm00590h

Thermosensitive Poly( N -isopropylacrylamide)−Clay Nanocomposites with Enhanced Temperature Response
journal, December 2000


Conducting polymer–clay composites for electrochemical applications
journal, January 1994

  • Faguy, Peter W.; Ma, Wanli; Lowe, J. Alan
  • J. Mater. Chem., Vol. 4, Issue 5
  • DOI: 10.1039/JM9940400771

Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation
journal, April 2016

  • Wu, Zhengjie; Su, Xin; Xu, Yuanyuan
  • Scientific Reports, Vol. 6, Issue 1
  • DOI: 10.1038/srep24474

Electronically Programmable, Reversible Shape Change in Two- and Three-Dimensional Hydrogel Structures
journal, December 2012


Large Scale Structures in Nanocomposite Hydrogels
journal, March 2005

  • Loizou, Elena; Butler, Paul; Porcar, Lionel
  • Macromolecules, Vol. 38, Issue 6
  • DOI: 10.1021/ma047411a

Rheology and Adhesion of Poly(acrylic acid)/Laponite Nanocomposite Hydrogels as Biocompatible Adhesives
journal, February 2014


A highly sensitive and stable glucose biosensor using thymine-based polycations into laponite hydrogel films
journal, April 2016


Chemical stability of Laponite in aqueous media
journal, August 2014


Architected cellular ceramics with tailored stiffness via direct foam writing
journal, February 2017

  • Muth, Joseph T.; Dixon, Patrick G.; Woish, Logan
  • Proceedings of the National Academy of Sciences, Vol. 114, Issue 8
  • DOI: 10.1073/pnas.1616769114

Unusual Thixotropic Properties of Aqueous Dispersions of Laponite RD
journal, September 1996

  • Willenbacher, Norbert
  • Journal of Colloid and Interface Science, Vol. 182, Issue 2
  • DOI: 10.1006/jcis.1996.0494

Cellular Microcultures: Programming Mechanical and Physicochemical Properties of 3D Hydrogel Cellular Microcultures via Direct Ink Writing (Adv. Healthcare Mater. 9/2016)
journal, May 2016

  • McCracken, Joselle M.; Badea, Adina; Kandel, Mikhail E.
  • Advanced Healthcare Materials, Vol. 5, Issue 9
  • DOI: 10.1002/adhm.201670043

Micro-extrusion of organic inks for direct-write assembly
journal, October 2008

  • Bruneaux, Julien; Therriault, Daniel; Heuzey, Marie-Claude
  • Journal of Micromechanics and Microengineering, Vol. 18, Issue 11
  • DOI: 10.1088/0960-1317/18/11/115020

Influence of pyrophosphate or polyethylene oxide on the aggregation and gelation of aqueous laponite dispersions
journal, July 2004

  • Mongondry, Philippe; Nicolai, Taco; Tassin, Jean-François
  • Journal of Colloid and Interface Science, Vol. 275, Issue 1
  • DOI: 10.1016/j.jcis.2004.01.037

UV patternable thin film chemistry for shape and functionally versatile self-oscillating gels
journal, January 2013

  • Yuan, Peixi; Kuksenok, Olga; Gross, Dustin E.
  • Soft Matter, Vol. 9, Issue 4
  • DOI: 10.1039/C2SM27100A

Tough and responsive oppositely charged nanocomposite hydrogels for use as bilayer actuators assembled through interfacial electrostatic attraction
journal, January 2016

  • Liu, Shuhui; Gao, Guorong; Xiao, Ying
  • Journal of Materials Chemistry B, Vol. 4, Issue 19
  • DOI: 10.1039/C6TB00583G