Numerical investigation of the effect of pressure on heat release rate in iso-octane premixed turbulent flames under conditions relevant to SI engines

Savard, Bruno; Lapointe, Simon; Teodorczyk, Andrzej

doi:10.1016/j.proci.2016.07.056

Title: Numerical investigation of the effect of pressure on heat release rate in iso-octane premixed turbulent flames under conditions relevant to SI engines

Full Record
Other Related Research

Authors:: Savard, Bruno; Lapointe, Simon; Teodorczyk, Andrzej

Publication Date:: 2017-01-01

Sponsoring Org.:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

OSTI Identifier:: 1419569

Grant/Contract Number:: SC006591

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Proceedings of the Combustion Institute

Additional Journal Information:: Journal Name: Proceedings of the Combustion Institute Journal Volume: 36 Journal Issue: 3; Journal ID: ISSN 1540-7489

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

Citation Formats


                    Savard, Bruno, Lapointe, Simon, and Teodorczyk, Andrzej. Numerical investigation of the effect of pressure on heat release rate in iso-octane premixed turbulent flames under conditions relevant to SI engines.  United States: N. p., 2017. 
Web.  doi:10.1016/j.proci.2016.07.056.

Copy to clipboard


                    Savard, Bruno, Lapointe, Simon, & Teodorczyk, Andrzej. Numerical investigation of the effect of pressure on heat release rate in iso-octane premixed turbulent flames under conditions relevant to SI engines.  United States.  https://doi.org/10.1016/j.proci.2016.07.056

Copy to clipboard


                    Savard, Bruno, Lapointe, Simon, and Teodorczyk, Andrzej. Sun .  
"Numerical investigation of the effect of pressure on heat release rate in iso-octane premixed turbulent flames under conditions relevant to SI engines".  United States.  https://doi.org/10.1016/j.proci.2016.07.056.

Copy to clipboard


                    
@article{osti_1419569,

  title        = {Numerical investigation of the effect of pressure on heat release rate in iso-octane premixed turbulent flames under conditions relevant to SI engines},

  author       = {Savard, Bruno and Lapointe, Simon and Teodorczyk, Andrzej},

  abstractNote = {},

  doi          = {10.1016/j.proci.2016.07.056},

  journal      = {Proceedings of the Combustion Institute},

  number       = 3,

  volume       = 36,

  place        = {United States},

  year         = {2017},

  month        = {1}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.proci.2016.07.056

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 16 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Effects of dissipation rate and diffusion rate of the progress variable on local fuel burning rate in premixed turbulent flames

Journal Article Savard, Bruno ; Blanquart, Guillaume - Combustion and Flame
Cited by 18
https://doi.org/10.1016/j.combustflame.2017.02.025
Effects of water addition on the combustion of iso-octane investigated in laminar flames, low-temperature reactors, and an HCCI engine

Journal Article Schmitt, Steffen ; Wick, Maximilian ; Wouters, Christian ; ... - Combustion and Flame

In this work, the effect of H₂O injection on the combustion process of iso-octane was investigated with the aim to better understand the suitability of water addition as a potential engine control parameter for homogeneous-charge compression ignition (HCCI) combustion. Several experiments were combined including premixed low-pressure flames, a jet-stirred reactor (JSR) and a plug-flow reactor (PFR), both at atmospheric pressure, and a single-cylinder research engine (SCRE) operated with either iso-octane or RON 98 gasoline. The thermal effect of H₂O addition was determined in laminar premixed iso-octane/O₂/Ar flames (equivalence ratiomore »« less
Cited by 17
https://doi.org/10.1016/j.combustflame.2019.11.023

Full Text Available
Spatially resolved heat release rate measurements in turbulent premixed flames

Journal Article Ayoola, B O ; Kaminski, C F ; Balachandran, R ; ... - Combustion and Flame

Heat release rate is a fundamental property of great importance for the theoretical and experimental elucidation of unsteady flame behaviors such as combustion noise, combustion instabilities, and pulsed combustion. Investigations of such thermoacoustic interactions require a reliable indicator of heat release rate capable of resolving spatial structures in turbulent flames. Traditionally, heat release rate has been estimated via OH or CH radical chemiluminescence; however, chemiluminescence suffers from being a line-of-sight technique with limited capability for resolving small-scale structures. In this paper, we report spatially resolved two-dimensional measurements of a quantity closely related to heat release rate. The diagnostic technique usesmore »« less
https://doi.org/10.1016/j.combustflame.2005.06.005
Measurements of the heat release rate integral in turbulent premixed stagnation flames with particle image velocimetry

Journal Article Chen, Yung-Cheng ; Kim, Munki ; Han, Jeongjae ; ... - Combustion and Flame

A new definition of turbulent consumption speed is proposed in this work that is based on the heat release rate integral, rather than the mass burning rate integral. Its detailed derivation and the assumptions involved are discussed in a general context that applies to all properly defined reaction progress variables. The major advantage of the proposed definition is that it does not require the thin-flame assumption, in contrast to previous definitions. Experimental determination of the local turbulent displacement speed, S{sub D}, and the local turbulent consumption speed, S{sub C}, is also demonstrated with the particle image velocimetry technique in threemore »« less
https://doi.org/10.1016/J.COMBUSTFLAME.2008.04.024
Impact of heat release on strain rate field in turbulent premixed Bunsen flames

Journal Article Coriton, Bruno Rene Leon ; Frank, Jonathan H. - Proceedings of the Combustion Institute

The effects of combustion on the strain rate field are investigated in turbulent premixed CH₄/air Bunsen flames using simultaneous tomographic PIV and OH LIF measurements. Tomographic PIV provides three-dimensional velocity measurements, from which the complete strain rate tensor is determined. The OH LIF measurements are used to determine the position of the flame surface and the flame-normal orientation within the imaging plane. This combination of diagnostic techniques enables quantification of divergence as well as flame-normal and tangential strain rates, which are otherwise biased using only planar measurements. Measurements are compared in three lean-to-stoichiometric flames that have different amounts of heatmore »« less
Cited by 6
https://doi.org/10.1016/j.proci.2016.07.006

Full Text Available

Similar Records