The significance of nanoparticles on bond strength of polymer concrete to steel
Abstract
Here, polymer concrete (PC) is a commonly used material in construction due to its improved durability and good bond strength to steel substrate. PC has been suggested as a repair and seal material to restore the bond between the cement annulus and the steel casing in wells that penetrate formations under consideration for CO2 sequestration. Nanoparticles including Multi-Walled Carbon Nano Tubes (MWCNTs), Aluminum Nanoparticles (ANPs) and Silica Nano particles (SNPs) were added to an epoxy-based PC to examine how the nanoparticles affect the bond strength of PC to a steel substrate. Slant shear tests were used to determine the bond strength of PC incorporating nanomaterials to steel; results reveal that PC incorporating nanomaterials has an improved bond strength to steel substrate compared with neat PC. In particular, ANPs improve the bond strength by 51% over neat PC. Local shear stresses, extracted from Finite Element (FE) analysis of the slant shear test, were found to be as much as twice the apparent/average shear/bond strength. These results suggest that the impact of nanomaterials is higher than that shown by the apparent strength. Fourier Transform Infrared (FTIR) measurements of epoxy with and without nanomaterials showed ANPs to influence curing of epoxy, which mightmore »
- Authors:
-
- Univ. of New Mexico, Albuquerque, NM (United States)
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Egyptian Petroleum Research Institute, Cairo (Egypt)
- Publication Date:
- Research Org.:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Org.:
- USDOE Office of Fossil Energy (FE); USDOE National Nuclear Security Administration (NNSA)
- OSTI Identifier:
- 1339286
- Alternate Identifier(s):
- OSTI ID: 1413773
- Report Number(s):
- SAND-2015-11102J
Journal ID: ISSN 0143-7496; PII: S0143749617300015
- Grant/Contract Number:
- AC04-94AL85000; DEFE0009562
- Resource Type:
- Accepted Manuscript
- Journal Name:
- International Journal of Adhesion and Adhesives
- Additional Journal Information:
- Journal Volume: 74; Journal Issue: C; Journal ID: ISSN 0143-7496
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; polymer concrete; slant; shear test; bond strength; nanomaterials; Finite element analysis
Citation Formats
Douba, A., Genedy, M., Matteo, E. N., Kandil, U. F., Stormont, J., and Reda Taha, M. M. The significance of nanoparticles on bond strength of polymer concrete to steel. United States: N. p., 2017.
Web. doi:10.1016/j.ijadhadh.2017.01.001.
Douba, A., Genedy, M., Matteo, E. N., Kandil, U. F., Stormont, J., & Reda Taha, M. M. The significance of nanoparticles on bond strength of polymer concrete to steel. United States. https://doi.org/10.1016/j.ijadhadh.2017.01.001
Douba, A., Genedy, M., Matteo, E. N., Kandil, U. F., Stormont, J., and Reda Taha, M. M. Tue .
"The significance of nanoparticles on bond strength of polymer concrete to steel". United States. https://doi.org/10.1016/j.ijadhadh.2017.01.001. https://www.osti.gov/servlets/purl/1339286.
@article{osti_1339286,
title = {The significance of nanoparticles on bond strength of polymer concrete to steel},
author = {Douba, A. and Genedy, M. and Matteo, E. N. and Kandil, U. F. and Stormont, J. and Reda Taha, M. M.},
abstractNote = {Here, polymer concrete (PC) is a commonly used material in construction due to its improved durability and good bond strength to steel substrate. PC has been suggested as a repair and seal material to restore the bond between the cement annulus and the steel casing in wells that penetrate formations under consideration for CO2 sequestration. Nanoparticles including Multi-Walled Carbon Nano Tubes (MWCNTs), Aluminum Nanoparticles (ANPs) and Silica Nano particles (SNPs) were added to an epoxy-based PC to examine how the nanoparticles affect the bond strength of PC to a steel substrate. Slant shear tests were used to determine the bond strength of PC incorporating nanomaterials to steel; results reveal that PC incorporating nanomaterials has an improved bond strength to steel substrate compared with neat PC. In particular, ANPs improve the bond strength by 51% over neat PC. Local shear stresses, extracted from Finite Element (FE) analysis of the slant shear test, were found to be as much as twice the apparent/average shear/bond strength. These results suggest that the impact of nanomaterials is higher than that shown by the apparent strength. Fourier Transform Infrared (FTIR) measurements of epoxy with and without nanomaterials showed ANPs to influence curing of epoxy, which might explain the improved bond strength of PC incorporating ANPs.},
doi = {10.1016/j.ijadhadh.2017.01.001},
journal = {International Journal of Adhesion and Adhesives},
number = C,
volume = 74,
place = {United States},
year = {Tue Jan 03 00:00:00 EST 2017},
month = {Tue Jan 03 00:00:00 EST 2017}
}
Web of Science