Miniature bulge test and energy release rate in HIPed aluminum/aluminum interfacial fracture

Liu, C.; Lovato, M. L.; Clarke, K. D.; Alexander, D. J.; Blumenthal, W. R.

doi:10.1016/j.jmps.2017.10.006

Title: Miniature bulge test and energy release rate in HIPed aluminum/aluminum interfacial fracture

Full Record
Other Related Research

Abstract

We summarize the development of a technique of using miniature bulge test combined with three-dimensional digital image correlation (3D-DIC) for measuring energy release rate or fracture toughness of bimaterial interface of thin metal foils. Furthermore, the energy release rate associated with the HIPed aluminum/aluminum interfacial delamination is determined experimentally using the proposed technique. Detailed discussions of the schemes of preparing and conducting the bulge test, and computing various quantities required for the determination of the energy release rate are presented.

Authors:

^[1]; Lovato, M. L. ^[1]; Clarke, K. D. ^[1]; Alexander, D. J. ^[1]; Blumenthal, W. R. ^[1]

Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

Publication Date:: 2017-10-13

Research Org.:: Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

Sponsoring Org.:: USDOE National Nuclear Security Administration (NNSA)

OSTI Identifier:: 1402583

Alternate Identifier(s):: OSTI ID: 1566217

Report Number(s):: LA-UR-14-27023
Journal ID: ISSN 0022-5096

Grant/Contract Number:: AC52-06NA25396

Resource Type:: Accepted Manuscript

Journal Name:: Journal of the Mechanics and Physics of Solids

Additional Journal Information:: Journal Volume: 120; Journal ID: ISSN 0022-5096

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

Subject:: 36 MATERIALS SCIENCE; interfacial energy release rate; fracture toughness; thin metal foils; bulge test; 3D-DIC

Citation Formats


                    Liu, C., Lovato, M. L., Clarke, K. D., Alexander, D. J., and Blumenthal, W. R. Miniature bulge test and energy release rate in HIPed aluminum/aluminum interfacial fracture.  United States: N. p., 2017. 
Web.  doi:10.1016/j.jmps.2017.10.006.

Copy to clipboard


                    Liu, C., Lovato, M. L., Clarke, K. D., Alexander, D. J., & Blumenthal, W. R. Miniature bulge test and energy release rate in HIPed aluminum/aluminum interfacial fracture.  United States.  https://doi.org/10.1016/j.jmps.2017.10.006

Copy to clipboard


                    Liu, C., Lovato, M. L., Clarke, K. D., Alexander, D. J., and Blumenthal, W. R. Fri .  
"Miniature bulge test and energy release rate in HIPed aluminum/aluminum interfacial fracture".  United States.  https://doi.org/10.1016/j.jmps.2017.10.006.  https://www.osti.gov/servlets/purl/1402583.

Copy to clipboard


                    
@article{osti_1402583,

  title        = {Miniature bulge test and energy release rate in HIPed aluminum/aluminum interfacial fracture},

  author       = {Liu, C. and Lovato, M. L. and Clarke, K. D. and Alexander, D. J. and Blumenthal, W. R.},

  abstractNote = {We summarize the development of a technique of using miniature bulge test combined with three-dimensional digital image correlation (3D-DIC) for measuring energy release rate or fracture toughness of bimaterial interface of thin metal foils. Furthermore, the energy release rate associated with the HIPed aluminum/aluminum interfacial delamination is determined experimentally using the proposed technique. Detailed discussions of the schemes of preparing and conducting the bulge test, and computing various quantities required for the determination of the energy release rate are presented.},

  doi          = {10.1016/j.jmps.2017.10.006},

  journal      = {Journal of the Mechanics and Physics of Solids},

  number       = ,

  volume       = 120,

  place        = {United States},

  year         = {2017},

  month        = {10}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Accepted Manuscript (DOE)

Publisher's Version of Record

https://doi.org/10.1016/j.jmps.2017.10.006

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 4 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Effect of Substrate Compliance on Measuring Delamination Properties of Elastic Thin Foil

Journal Article Liu, C. - Journal of Applied Mechanics

Through the analysis of a model problem, a thin elastic plate bonded to an elastic foundation, we address several issues related to the miniature bulge test for measuring the energy-release rate associated with the interfacial fracture of a bimaterial system, where one of the constituents is a thin foil. These issues include the effect of the substrate compliance on the interpretation of the energy release rate, interfacial strength, and the identification of the boundary of the deforming bulge or the location of the interfacial crack front. The analysis done also suggests a way for measuring the so-called foundation modulus, whichmore »« less
https://doi.org/10.1115/1.4039480

Full Text Available
Development of experimental verification techniques for non-linear deformation and fracture.

Technical Report Moody, Neville Reid ; Bahr, David F

This project covers three distinct features of thin film fracture and deformation in which the current experimental technique of nanoindentation demonstrates limitations. The first feature is film fracture, which can be generated either by nanoindentation or bulge testing thin films. Examples of both tests will be shown, in particular oxide films on metallic or semiconductor substrates. Nanoindentations were made into oxide films on aluminum and titanium substrates for two cases; one where the metal was a bulk (effectively single crystal) material and the other where the metal was a 1 pm thick film grown on a silica or silicon substrate.more »« less
https://doi.org/10.2172/918217

Full Text Available
The relationship between critical strain energy release rate and fracture mode in multidirectional carbon-fiber/epoxy laminates

Conference Trakas, K ; Kortschot, M T

It is proposed that the fracture surface of delaminated specimens, and hence the critical strain energy release rate, is dependent on both the mode of fracture and the orientation of the plies on either side of the delamination with respect to the propagation direction. Recent fractographs of Mode 3 delamination surfaces obtained by the authors have reinforced the idea that the properties, G{sub 11c} and G{sub 111c}, are structural rather than material properties for composite laminates. In this study, the relationship between the mode of fracture, the ply orientation, and the apparent interlaminar toughness has been explored. Standard double-cantilever-beam andmore »« less
Measurement of Interfacial Fracture Toughness of Surface Coatings Using Pulsed-Laser-Induced Ultrasonic Waves

Journal Article Watanabe, Yousuke ; Yonezu, Akio ; Chen, Xi - Journal of Nondestructive Evaluation

This research develops a new technique for the measurement of interfacial fracture toughness of films/surface coatings using laser-induced ultrasonic waves. Using pulsed laser ablation on the bottom substrate surface, strong stress waves are generated leading to interfacial fractures and coating delamination. Simultaneously, a laser ultrasonic interferometer is used to measure the normal (out-of-plane) displacement of the top surface coating in order to detect coating delamination in a non-destructive manner. We can thus determine the critical laser energy for delamination, yielding the critical stress (that is, the interfacial strength). Subsequently, to examine the interfacial fracture toughness, additional pulsed laser irradiation ismore »« less
https://doi.org/10.1007/S10921-017-0456-Y
Islands stretch test for measuring the interfacial fracture energy between a hard film and a soft substrate

Journal Article Sun, Jeong-Yun ; Kavli Institute for Bionano Science and Technology, Harvard University, Cambridge, Massachusetts 02138 ; Department of Material Science and Engineering, Seoul National University, Seoul 151-742 ; ... - Journal of Applied Physics

We present a technique for measuring the interfacial fracture energy, {Gamma}{sub i}, between a hard thin film and a soft substrate. A periodic array of hard thin islands is fabricated on a soft substrate, which is then subjected to uniaxial tension under an optical microscope. When the applied strain reaches a critical value, delamination between the islands and the substrate starts from the edge of the islands. As the strain is increased, the interfacial cracks grow in a stable fashion. At a given applied strain, the width of the delaminated region is a unique function of the interfacial fracture energy.more »« less
https://doi.org/10.1063/1.4810763

Similar Records