An in situ tribometer for measuring friction and wear of polymers in a high pressure hydrogen environment

doi:10.1063/1.5001836

Title: An in situ tribometer for measuring friction and wear of polymers in a high pressure hydrogen environment

Authors:

Duranty, Edward R. ^[1]; Roosendaal, Timothy J. ^[1]; Pitman, Stan G. ^[1]; Tucker, Joseph C. ^[1]; Owsley, Jr., Stanley L. ^[1]; Suter, Jonathan D. ^[1]; Alvine, Kyle J. ^[1]

Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, Washington 99354, USA

Publication Date:: 2017-09-28

Sponsoring Org.:: USDOE

OSTI Identifier:: 1398818

Alternate Identifier(s):: OSTI ID: 1395381

Resource Type:: Published Article

Journal Name:: Review of Scientific Instruments

Additional Journal Information:: Journal Name: Review of Scientific Instruments Journal Volume: 88 Journal Issue: 9; Journal ID: ISSN 0034-6748

Publisher:: American Institute of Physics

Country of Publication:: United States

Language:: English

Citation Formats


                    Duranty, Edward R., Roosendaal, Timothy J., Pitman, Stan G., Tucker, Joseph C., Owsley, Jr., Stanley L., Suter, Jonathan D., and Alvine, Kyle J. An in situ tribometer for measuring friction and wear of polymers in a high pressure hydrogen environment.  United States: N. p., 2017. 
        Web.  doi:10.1063/1.5001836.

Copy to clipboard


                    Duranty, Edward R., Roosendaal, Timothy J., Pitman, Stan G., Tucker, Joseph C., Owsley, Jr., Stanley L., Suter, Jonathan D., & Alvine, Kyle J. An in situ tribometer for measuring friction and wear of polymers in a high pressure hydrogen environment.  United States.  doi:10.1063/1.5001836.

Copy to clipboard


                    Duranty, Edward R., Roosendaal, Timothy J., Pitman, Stan G., Tucker, Joseph C., Owsley, Jr., Stanley L., Suter, Jonathan D., and Alvine, Kyle J. Thu .  
        "An in situ tribometer for measuring friction and wear of polymers in a high pressure hydrogen environment".  United States.  doi:10.1063/1.5001836.

Copy to clipboard


                    
@article{osti_1398818,

  title        = {An in situ tribometer for measuring friction and wear of polymers in a high pressure hydrogen environment},

  author       = {Duranty, Edward R. and Roosendaal, Timothy J. and Pitman, Stan G. and Tucker, Joseph C. and Owsley, Jr., Stanley L. and Suter, Jonathan D. and Alvine, Kyle J.},

  abstractNote = {},

  doi          = {10.1063/1.5001836},

  journal      = {Review of Scientific Instruments},

  number       = 9,

  volume       = 88,

  place        = {United States},

  year         = {2017},

  month        = {9}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Publisher's Version of Record
DOI: 10.1063/1.5001836

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 1 work

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas
journal, February 2009

Yamabe, Junichiro; Nishimura, Shin
International Journal of Hydrogen Energy, Vol. 34, Issue 4
DOI: 10.1016/j.ijhydene.2008.11.105

Mechanically alloyed metal hydride systems
journal, February 2001

Huot, J.; Liang, G.; Schulz, R.
Applied Physics A Materials Science & Processing, Vol. 72, Issue 2
DOI: 10.1007/s003390100772

Recent challenges of hydrogen storage technologies for fuel cell vehicles
journal, May 2009

Mori, D.; Hirose, K.
International Journal of Hydrogen Energy, Vol. 34, Issue 10
DOI: 10.1016/j.ijhydene.2008.07.115

Hydrogen-fuelled vehicles
journal, August 2009

Schlapbach, Louis
Nature, Vol. 460, Issue 7257
DOI: 10.1038/460809a

Activated diffusion in membranes
journal, January 1939

Barrer, R. M.; Rideal, Eric K.
Transactions of the Faraday Society, Vol. 35
DOI: 10.1039/tf9393500644

Application of acoustic emission method to detection of internal fracture of sealing rubber material by high-pressure hydrogen decompression
journal, February 2011

Yamabe, Junichiro; Matsumoto, Takashi; Nishimura, Shin
Polymer Testing, Vol. 30, Issue 1
DOI: 10.1016/j.polymertesting.2010.11.002

On-board and Off-board performance of hydrogen storage options for light-duty vehicles
journal, February 2012

Ahluwalia, R. K.; Hua, T. Q.; Peng, J. K.
International Journal of Hydrogen Energy, Vol. 37, Issue 3
DOI: 10.1016/j.ijhydene.2011.05.040

Annealing enhanced hydrogen absorption in nanocrystalline Pd∕Au sensing films
journal, June 2005

Zhao, Z.; Carpenter, M. A.
Journal of Applied Physics, Vol. 97, Issue 12
DOI: 10.1063/1.1927690

High-pressure hydrogen materials compatibility of piezoelectric films
journal, November 2010

Alvine, K. J.; Shutthanandan, V.; Bennett, W. D.
Applied Physics Letters, Vol. 97, Issue 22
DOI: 10.1063/1.3517445

Hydrogen influence on the tensile properties of mono and multi-layer polymers for gas distribution
journal, July 2010

Castagnet, Sylvie; Grandidier, Jean-Claude; Comyn, Mathieu
International Journal of Hydrogen Energy, Vol. 35, Issue 14
DOI: 10.1016/j.ijhydene.2010.04.155

Analytical transmission electron microscopy of hydrogen-induced degradation in ferroelectric Pb(Zr, Ti)O3 on a Pt electrode
journal, October 1998

Ikarashi, Nobuyuki
Applied Physics Letters, Vol. 73, Issue 14
DOI: 10.1063/1.122333

Development of high pressure gaseous hydrogen storage technologies
journal, January 2012

Zheng, Jinyang; Liu, Xianxin; Xu, Ping
International Journal of Hydrogen Energy, Vol. 37, Issue 1
DOI: 10.1016/j.ijhydene.2011.02.125

Hydrogen species motion in piezoelectrics: A quasi-elastic neutron scattering study
journal, March 2012

Alvine, K. J.; Tyagi, M.; Brown, C. M.
Journal of Applied Physics, Vol. 111, Issue 5
DOI: 10.1063/1.3691114

Transport Properties of Gases in Polymers: Experimental Methods
journal, May 2001

Flaconneche, B.; Martin, J.; Klopffer, M. H.
Oil & Gas Science and Technology, Vol. 56, Issue 3
DOI: 10.2516/ogst:2001022

Effect of hydrogen on Pb(Zr,Ti)O3-based ferroelectric capacitors
journal, October 1998

Aggarwal, S.; Perusse, S. R.; Tipton, C. W.
Applied Physics Letters, Vol. 73, Issue 14
DOI: 10.1063/1.122339

Similar records in OSTI.GOV collections:

In Situ High Pressure Hydrogen Tribological Testing of Common Polymer Materials Used in the Hydrogen Delivery Infrastructure

Journal Article Duranty, Edward R. ; Roosendaal, Timothy J. ; Pitman, Stan G. ; ... - Journal of Visualized Experiments

High pressure hydrogen gas is known to adversely affect metallic components of compressors, valves, hoses, and actuators. However, relatively little is known about the effects of high pressure hydrogen on the polymer sealing and barrier materials also found within these components. More study is required in order to determine the compatibility of common polymer materials found in the components of the hydrogen fuel delivery infrastructure with high pressure hydrogen. As a result, it is important to consider the changes in physical properties such as friction and wear in situ while the polymer is exposed to high pressure hydrogen. In thismore »« less
DOI: 10.3791/56884
On the possible role of triboplasma in friction and wear of diamond-like carbon films in hydrogen-containing environments.

Journal Article Matta, C. ; Eryilmaz, O. ; Bouchet, M. I. D, ; ... - J. Phys. D

Hydrogen-free diamond-like carbon (DLC) films (both amorphous (a-C) and tetrahedral amorphous carbon (ta-C)) suffer high friction and severe wear losses when tested in inert and/or high vacuum environments. However, they provide anomalous superlow friction and wear coefficients in the presence of hydrogen gas, water vapor and alcohol molecules in the test environment. In this paper, we used such films in a systematic study to further confirm that hydrogen indeed plays an important role in their friction and wear behaviors. To study the effect of hydrogen, we conducted sliding tests in a hydrogen-containing test chamber and analyzed the chemistry of theirmore »« less
DOI: 10.1088/0022-3727/42/7/075307
Large-scale Manufacturing of Nanoparticulate-based Lubrication Additives for Improved Energy Efficiency and Reduced Emissions

Technical Report Erdemir, Ali

This project was funded under the Department of Energy (DOE) Lab Call on Nanomanufacturing for Energy Efficiency and was directed toward the development of novel boron-based nanocolloidal lubrication additives for improving the friction and wear performance of machine components in a wide range of industrial and transportation applications. Argonne's research team concentrated on the scientific and technical aspects of the project, using a range of state-of-the art analytical and tribological test facilities. Argonne has extensive past experience and expertise in working with boron-based solid and liquid lubrication additives, and has intellectual property ownership of several. There were two industrial collaboratorsmore »« less
DOI: 10.2172/1097780

Full Text Available
High-temperature Tribological Behavior of Structural Materials after Conditioning in Impure-Helium Environments for High_temperature Gas-Cooled Reactor Applications

Journal Article Pauly, Valentin ; Tesch, Carter ; Kern, Joseph ; ... - Journal of Nuclear Materials

Incoloy 800HT and Inconel 617 have been selected as candidate structural alloys for the hightemperature gas-cooled reactor (HTGR) concept. Helium, the primary coolant, contains impurities (e.g., H2O and CH4) that can induce corrosion reactions at high temperatures, which in turn can affect the tribological behavior of components in sliding contact such as valves and control-rod drive systems. This paper presents results from the study of the tribological behavior of both alloys before and after conditioning them in either an impure-helium oxidizing environment or in an air environment. Both alloys were conditioned for 22 days at elevated temperatures in a once-throughmore »« less
DOI: 10.1016/j.jnucmat.2019.05.025
TOF-SIMS and XPS characterization of diamondlike carbon films after tests in inert and oxidizing environments.

Journal Article Eryilmaz, O. L. ; Erdemir, A. ; Energy Systems - Wear

In this study, we used time-of-flight secondary ion mass spectrometry (TOF-SIMS), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy techniques to ascertain the chemical nature of the sliding surfaces and wear debris particles of acetylene-grown diamond-like carbon (DLC) films after tests in dry nitrogen and oxygen. Between these two gasses, nitrogen is relatively inert and hence is not expected to enter into significant tribochemical reactions with sliding DLC surfaces, but oxygen is highly reactive toward carbon and hydrogen (which make up these DLC films) and hence may trigger some tribochemical reactions. The tribological tests were performed in a ball-on-disk tribometer atmore »« less
DOI: 10.1016/j.wear.2007.10.012

Similar Records

Title: An in situ tribometer for measuring friction and wear of polymers in a high pressure hydrogen environment

Citation Formats

Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas journal, February 2009

Mechanically alloyed metal hydride systems journal, February 2001

Recent challenges of hydrogen storage technologies for fuel cell vehicles journal, May 2009

Hydrogen-fuelled vehicles journal, August 2009

Activated diffusion in membranes journal, January 1939

Application of acoustic emission method to detection of internal fracture of sealing rubber material by high-pressure hydrogen decompression journal, February 2011

On-board and Off-board performance of hydrogen storage options for light-duty vehicles journal, February 2012

Annealing enhanced hydrogen absorption in nanocrystalline Pd∕Au sensing films journal, June 2005

High-pressure hydrogen materials compatibility of piezoelectric films journal, November 2010

Hydrogen influence on the tensile properties of mono and multi-layer polymers for gas distribution journal, July 2010

Analytical transmission electron microscopy of hydrogen-induced degradation in ferroelectric Pb(Zr, Ti)O3 on a Pt electrode journal, October 1998

Development of high pressure gaseous hydrogen storage technologies journal, January 2012

Hydrogen species motion in piezoelectrics: A quasi-elastic neutron scattering study journal, March 2012

Transport Properties of Gases in Polymers: Experimental Methods journal, May 2001

Effect of hydrogen on Pb(Zr,Ti)O3-based ferroelectric capacitors journal, October 1998

Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas
journal, February 2009

Mechanically alloyed metal hydride systems
journal, February 2001

Recent challenges of hydrogen storage technologies for fuel cell vehicles
journal, May 2009

Hydrogen-fuelled vehicles
journal, August 2009

Activated diffusion in membranes
journal, January 1939

Application of acoustic emission method to detection of internal fracture of sealing rubber material by high-pressure hydrogen decompression
journal, February 2011

On-board and Off-board performance of hydrogen storage options for light-duty vehicles
journal, February 2012

Annealing enhanced hydrogen absorption in nanocrystalline Pd∕Au sensing films
journal, June 2005

High-pressure hydrogen materials compatibility of piezoelectric films
journal, November 2010

Hydrogen influence on the tensile properties of mono and multi-layer polymers for gas distribution
journal, July 2010

Analytical transmission electron microscopy of hydrogen-induced degradation in ferroelectric Pb(Zr, Ti)O3 on a Pt electrode
journal, October 1998

Development of high pressure gaseous hydrogen storage technologies
journal, January 2012

Hydrogen species motion in piezoelectrics: A quasi-elastic neutron scattering study
journal, March 2012

Transport Properties of Gases in Polymers: Experimental Methods
journal, May 2001

Effect of hydrogen on Pb(Zr,Ti)O3-based ferroelectric capacitors
journal, October 1998