skip to main content
DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Effect of Aluminum Titanate (Al 2 TiO 5 ) Doping on the Mechanical Performance of Solid Oxide Fuel Cell Ni-YSZ Anode

 [1];  [1]
  1. Montana State University, Mechanical Engineering, 220 Roberts Hall 59717 Bozeman, MT USA
Publication Date:
Sponsoring Org.:
OSTI Identifier:
Grant/Contract Number:  
Resource Type:
Publisher's Accepted Manuscript
Journal Name:
Fuel Cells
Additional Journal Information:
Journal Name: Fuel Cells Journal Volume: 17 Journal Issue: 6; Journal ID: ISSN 1615-6846
Wiley Blackwell (John Wiley & Sons)
Country of Publication:

Citation Formats

McCleary, M., and Amendola, R. Effect of Aluminum Titanate (Al 2 TiO 5 ) Doping on the Mechanical Performance of Solid Oxide Fuel Cell Ni-YSZ Anode. Germany: N. p., 2017. Web. doi:10.1002/fuce.201700073.
McCleary, M., & Amendola, R. Effect of Aluminum Titanate (Al 2 TiO 5 ) Doping on the Mechanical Performance of Solid Oxide Fuel Cell Ni-YSZ Anode. Germany. doi:10.1002/fuce.201700073.
McCleary, M., and Amendola, R. Mon . "Effect of Aluminum Titanate (Al 2 TiO 5 ) Doping on the Mechanical Performance of Solid Oxide Fuel Cell Ni-YSZ Anode". Germany. doi:10.1002/fuce.201700073.
title = {Effect of Aluminum Titanate (Al 2 TiO 5 ) Doping on the Mechanical Performance of Solid Oxide Fuel Cell Ni-YSZ Anode},
author = {McCleary, M. and Amendola, R.},
abstractNote = {},
doi = {10.1002/fuce.201700073},
journal = {Fuel Cells},
number = 6,
volume = 17,
place = {Germany},
year = {2017},
month = {10}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record
DOI: 10.1002/fuce.201700073

Citation Metrics:
Cited by: 3 works
Citation information provided by
Web of Science

Save / Share:

Works referenced in this record:

On Absence of Quantitative Correlations Between Strength and Stiffness in Microcracking Materials
journal, April 2010

Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters
journal, February 2005

Electronic Conduction Mechanism in Yttria-Stabilized Zirconia-Titania under Reducing Atmospheres
journal, January 1996

  • Swider, Karen E.
  • Journal of The Electrochemical Society, Vol. 143, Issue 11
  • DOI: 10.1149/1.1837276

Alumina Doped Ni/YSZ Anode Materials for Solid Oxide Fuel Cells
journal, October 2009

Distribution of the Mechanical Strength of Solid Catalysts
journal, December 2006

  • Wu, D. F.; Zhou, J. C.; Li, Y. D.
  • Chemical Engineering Research and Design, Vol. 84, Issue 12
  • DOI: 10.1205/cherd05015

Young's modulus of some SOFCs materials as a function of temperature
journal, January 2008

Progress in material selection for solid oxide fuel cell technology: A review
journal, July 2015

Microstructure and mechanical properties of yttria-stabilized ZrO2/Al2O3 nanocomposite ceramics
journal, December 2008

Improvement of anode-supported solid oxide fuel cells
journal, September 2008

Optimized SOFC electrode microstructure
journal, November 1996

Total Electrical Conductivity Measurements of TiO2 Doped YSZ Ceramics
journal, January 1998

  • Kobayashi, Kiyoshi; Kato, Kinya; Kawashima, Tsuyoshi
  • Journal of the Ceramic Society of Japan, Vol. 106, Issue 1239
  • DOI: 10.2109/jcersj.106.1073

Part I: Porosity dependence of the Weibull modulus for hydroxyapatite and other brittle materials
journal, April 2012

Structural and electrical characterization of titania-doped YSZ
journal, January 1997

  • Traqueia, L. S. M.; Pagnier, T.; Marques, F. M. B.
  • Journal of the European Ceramic Society, Vol. 17, Issue 8
  • DOI: 10.1016/S0955-2219(96)00172-0

Effects of alumina additions on sintering behavior of gadolinia-doped ceria
journal, January 2004

Enhancement of high temperature metallic catalysts: Aluminum titanate in the nickel-zirconia system
journal, October 2016

Influence of residual stresses on the evolution of micro-structure during the partial reduction of NiAl2O4
journal, October 1997

Mechanical properties and lifetime predictions for Ba0.5Sr0.5Co0.8Fe0.2O3−δ membrane material
journal, December 2011

Elastic Properties of Nickel-Based Anodes for Solid Oxide Fuel Cells as a Function of the Fraction of Reduced NiO
journal, December 2004

Aluminum Titanate Formation by Solid-State Reaction of Fine Al2O3 and TiO2 Powders
journal, January 1987

Microstructure-Property Connections for Porous Ceramics: The Possibilities Offered by Micromechanics
journal, November 2016

  • Bruno, Giovanni; Kachanov, Mark
  • Journal of the American Ceramic Society, Vol. 99, Issue 12
  • DOI: 10.1111/jace.14624

Characterization of composites containing NiAl2O4 spinel phase from Al2O3/NiO and Al2O3/Ni systems
journal, March 2016

  • Zygmuntowicz, Justyna; Wiecińska, Paulina; Miazga, Aleksandra
  • Journal of Thermal Analysis and Calorimetry, Vol. 125, Issue 3
  • DOI: 10.1007/s10973-016-5357-2

Mechanical properties of porous MgO substrates for membrane applications
journal, September 2014

Electrical properties of novel mixed-conducting oxides
journal, July 1989

  • Lion, S. S.; Worrell, W. L.
  • Applied Physics A Solids and Surfaces, Vol. 49, Issue 1
  • DOI: 10.1007/BF00615461

Anchoring of Infiltrated Nickel Electro-Catalyst by Addition of Aluminum Titanate
journal, January 2011

  • Law, C. H.; Sofie, S. W.
  • Journal of The Electrochemical Society, Vol. 158, Issue 9
  • DOI: 10.1149/1.3610226

Factors Controlling the Thermal Stability of Aluminum Titanate Ceramics in Vacuum
journal, October 2005

Thermal stabilization of aluminium titanate and properties of aluminium titanate solid solutions
journal, May 1991

Review of mechanical characterization methods for ceramics used in energy technologies
journal, December 2014

Predicting the mechanical properties of brittle porous materials with various porosity and pore sizes
journal, July 2017

  • Cui, Zhiwei; Huang, Yongmin; Liu, Honglai
  • Journal of the Mechanical Behavior of Biomedical Materials, Vol. 71
  • DOI: 10.1016/j.jmbbm.2017.02.014

Comparison of thermo-mechanical characteristics of non-doped and 3mol% B-site Zr-doped Ba0.5Sr0.5Co0.8Fe0.2O3−δ
journal, January 2014

Mechanical behaviour of ceramic oxygen ion-conducting membranes
journal, October 2000

Development of a multilayer anode for solid oxide fuel cells
journal, December 2002

A modified size effect model for brittle nonmetallic materials
journal, May 2002

Study of contact resistance at the electrode–interconnect interfaces in planar type Solid Oxide Fuel Cells
journal, July 2013

Influence of temperature and atmosphere on the strength and elastic modulus of solid oxide fuel cell anode supports
journal, April 2016

Effects of Anode Material and Fuel on Anodic Reaction of Solid Oxide Fuel Cells
journal, January 1992

  • Setoguchi, Toshihiko
  • Journal of The Electrochemical Society, Vol. 139, Issue 10
  • DOI: 10.1149/1.2068998

The flexural strength and densification behavior of Al2O3-doped Ce0.8Y0.2O1.9 electrolyte composites
journal, February 2007

  • Xu, Hongmei; Yan, Hongge; Chen, Zhenhua
  • Materials Science and Engineering: A, Vol. 447, Issue 1-2
  • DOI: 10.1016/j.msea.2006.10.027

Statistical properties of Weibull estimators
journal, December 1991

  • Khalili, A.; Kromp, K.
  • Journal of Materials Science, Vol. 26, Issue 24
  • DOI: 10.1007/BF02402669

Thermo-mechanical properties of (Sr,Y)TiO3 as anode material for solid oxide fuel cells
journal, May 2012

Influence of cerium doping on mechanical properties of tetragonal scandium-stabilized zirconia
journal, April 2017

Optimization of the strength of SOFC anode supports
journal, May 2012

Electronic conductivity measurements of 5 mol% TiO2-doped YSZ by a d.c.-polarization technique
journal, January 1997

Sintering behavior of Al2TiO5 base ceramics and their thermal properties
journal, December 1999

Effects of the number of testing specimens and the estimation methods on the Weibull parameters of solid catalysts
journal, December 2001

Mechanical Properties of Supports and Half-Cells for Solid Oxide Electrolysis Influenced by Alumina-Zirconia Composites
journal, August 2016

Mechanical properties of NiO/Ni–YSZ composites depending on temperature, porosity and redox cycling
journal, June 2009

Relationship of Strength and Defects of Ceramic Materials and Their Treatment by Weibull Theory.
journal, January 2001

Processing and properties of Al2O3 nanocomposites reinforced with sub-micron Ni and NiAl2O4
journal, April 2001

A numerical tool to estimate SOFC mechanical degradation: Case of the planar cell configuration
journal, January 2008