From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample
Abstract
We follow an Al-12at.%Cu alloy sample from the liquid state to mechanical failure, using in situ X-ray radiography during directional solidification and tensile testing, as well as three-dimensional computed tomography of the microstructure before and after mechanical testing. The solidification processing stage is simulated with a multi-scale dendritic needle network model, and the micromechanical behavior of the solidified microstructure is simulated using voxelized tomography data and an elasto-viscoplastic fast Fourier transform model. This study demonstrates the feasibility of direct in situ monitoring of a metal alloy microstructure from the liquid processing stage up to its mechanical failure, supported by quantitative simulations of microstructure formation and its mechanical behavior.
- Authors:
-
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States); IMDEA Materials Inst., Getafe (Spain)
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
- Argonne National Lab. (ANL), Argonne, IL (United States). Advanced Photon Source (APS)
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Colorado School of Mines, Golden, CO (United States)
- Publication Date:
- Research Org.:
- Los Alamos National Laboratory (LANL), Los Alamos, NM (United States); Argonne National Laboratory (ANL), Argonne, IL (United States)
- Sponsoring Org.:
- USDOE; USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22). Materials Sciences & Engineering Division
- OSTI Identifier:
- 1396122
- Alternate Identifier(s):
- OSTI ID: 1405300
- Report Number(s):
- LA-UR-17-21649
Journal ID: ISSN 1073-5623; TRN: US1702390
- Grant/Contract Number:
- AC52-06NA25396; AC02-06CH11357
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science
- Additional Journal Information:
- Journal Volume: 48; Journal Issue: 11; Journal ID: ISSN 1073-5623
- Publisher:
- ASM International
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; Processing-Microstructure-Properties; Solidification; Mechanical testing; X-ray radiography and tomography; Mechanical Testing; X-ray Radiography; X-ray tomography
Citation Formats
Tourret, D., Mertens, J. C. E., Lieberman, E., Imhoff, S. D., Gibbs, J. W., Henderson, K., Fezzaa, K., Deriy, A. L., Sun, T., Lebensohn, R. A., Patterson, B. M., and Clarke, A. J. From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample. United States: N. p., 2017.
Web. doi:10.1007/s11661-017-4302-8.
Tourret, D., Mertens, J. C. E., Lieberman, E., Imhoff, S. D., Gibbs, J. W., Henderson, K., Fezzaa, K., Deriy, A. L., Sun, T., Lebensohn, R. A., Patterson, B. M., & Clarke, A. J. From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample. United States. https://doi.org/10.1007/s11661-017-4302-8
Tourret, D., Mertens, J. C. E., Lieberman, E., Imhoff, S. D., Gibbs, J. W., Henderson, K., Fezzaa, K., Deriy, A. L., Sun, T., Lebensohn, R. A., Patterson, B. M., and Clarke, A. J. Wed .
"From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample". United States. https://doi.org/10.1007/s11661-017-4302-8. https://www.osti.gov/servlets/purl/1396122.
@article{osti_1396122,
title = {From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample},
author = {Tourret, D. and Mertens, J. C. E. and Lieberman, E. and Imhoff, S. D. and Gibbs, J. W. and Henderson, K. and Fezzaa, K. and Deriy, A. L. and Sun, T. and Lebensohn, R. A. and Patterson, B. M. and Clarke, A. J.},
abstractNote = {We follow an Al-12at.%Cu alloy sample from the liquid state to mechanical failure, using in situ X-ray radiography during directional solidification and tensile testing, as well as three-dimensional computed tomography of the microstructure before and after mechanical testing. The solidification processing stage is simulated with a multi-scale dendritic needle network model, and the micromechanical behavior of the solidified microstructure is simulated using voxelized tomography data and an elasto-viscoplastic fast Fourier transform model. This study demonstrates the feasibility of direct in situ monitoring of a metal alloy microstructure from the liquid processing stage up to its mechanical failure, supported by quantitative simulations of microstructure formation and its mechanical behavior.},
doi = {10.1007/s11661-017-4302-8},
journal = {Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science},
number = 11,
volume = 48,
place = {United States},
year = {Wed Sep 13 00:00:00 EDT 2017},
month = {Wed Sep 13 00:00:00 EDT 2017}
}
Free Publicly Available Full Text
Publisher's Version of Record
Other availability
Search WorldCat to find libraries that may hold this journal
Cited by: 18 works
Citation information provided by
Web of Science
Web of Science
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
Recent advances in X-ray microtomography applied to materials
journal, May 2008
- Stock, S. R.
- International Materials Reviews, Vol. 53, Issue 3
3D imaging in material science: Application of X-ray tomography
journal, November 2010
- Salvo, Luc; Suéry, Michel; Marmottant, Ariane
- Comptes Rendus Physique, Vol. 11, Issue 9-10
On the interest of synchrotron X-ray imaging for the study of solidification in metallic alloys
journal, April 2012
- Nguyen-Thi, Henri; Salvo, Luc; Mathiesen, Ragnvald H.
- Comptes Rendus Physique, Vol. 13, Issue 3
Fast In Situ X-Ray Microtomography Observations of Solidification and Semisolid Deformation of Al-Cu Alloys
journal, January 2012
- Suéry, Michel; Terzi, Sofiane; Mireux, Bastien
- JOM, Vol. 64, Issue 1
Synchrotron X-ray imaging for crystal growth studies
journal, February 2013
- Baruchel, José; Di Michiel, Marco; Lafford, Tamzin
- Comptes Rendus Physique, Vol. 14, Issue 2-3
In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics
journal, January 2010
- Buffiere, J. -Y.; Maire, E.; Adrien, J.
- Experimental Mechanics, Vol. 50, Issue 3
Quantitative X-ray tomography
journal, December 2013
- Maire, E.; Withers, P. J.
- International Materials Reviews, Vol. 59, Issue 1
Time Resolved X-Ray Imaging of Dendritic Growth in Binary Alloys
journal, December 1999
- Mathiesen, R. H.; Arnberg, L.; Mo, F.
- Physical Review Letters, Vol. 83, Issue 24
Application of synchrotron X-ray imaging to the study of directional solidification of aluminium-based alloys
journal, February 2005
- Schenk, T.; Nguyen Thi, H.; Gastaldi, J.
- Journal of Crystal Growth, Vol. 275, Issue 1-2
Investigation of columnar–equiaxed transition and equiaxed growth of aluminium based alloys by X-ray radiography
journal, December 2005
- Reinhart, G.; Mangelinck-Noël, N.; Nguyen-Thi, H.
- Materials Science and Engineering: A, Vol. 413-414
Microstructure selection in thin-sample directional solidification of an Al-Cu alloy: In situ X-ray imaging and phase-field simulations
journal, May 2017
- Clarke, A. J.; Tourret, D.; Song, Y.
- Acta Materialia, Vol. 129
Time-resolved x-ray imaging of aluminum alloy solidification processes
journal, August 2002
- Mathiesen, Ragnvald H.; Arnberg, Lars; Ramsøskar, Kjell
- Metallurgical and Materials Transactions B, Vol. 33, Issue 4
X-ray radiography observations of columnar dendritic growth and constitutional undercooling in an Al–30wt%Cu alloy
journal, February 2005
- Mathiesen, Ragnvald H.; Arnberg, Lars
- Acta Materialia, Vol. 53, Issue 4
Laboratory micro- and nanoscale X-ray tomographic investigation of Al–7 at.%Cu solidification structures
journal, September 2014
- Patterson, B. M.; Henderson, K. C.; Gibbs, P. J.
- Materials Characterization, Vol. 95
X-ray Imaging and Controlled Solidification of Al-Cu Alloys Toward Microstructures by Design: X-ray Imaging and Controlled Solidification of Al-Cu Alloys
journal, January 2015
- Clarke, Amy J.; Tourret, Damien; Imhoff, Seth D.
- Advanced Engineering Materials, Vol. 17, Issue 4
Crystal fragmentation and columnar-to-equiaxed transitions in Al-Cu studied by synchrotron X-ray video microscopy
journal, August 2006
- Mathiesen, R. H.; Arnberg, L.; Bleuet, P.
- Metallurgical and Materials Transactions A, Vol. 37, Issue 8
In situ observations of dendritic fragmentation due to local solute-enrichment during directional solidification of an aluminum alloy
journal, August 2007
- Ruvalcaba, D.; Mathiesen, R. H.; Eskin, D. G.
- Acta Materialia, Vol. 55, Issue 13
Direct observation of stray crystal formation in unidirectional solidification of Sn–Bi alloy by X-ray imaging
journal, February 2004
- Yasuda, Hideyuki; Ohnaka, Itsuo; Kawasaki, Koichi
- Journal of Crystal Growth, Vol. 262, Issue 1-4
In-Situ and Real-Time Analysis of the Formation of Strains and Microstructure Defects during Solidification of Al-3.5 Wt Pct Ni Alloys
journal, February 2008
- Reinhart, G.; Buffet, A.; Nguyen-Thi, H.
- Metallurgical and Materials Transactions A, Vol. 39, Issue 4
In Situ X-Ray Observations of Dendritic Fragmentation During Directional Solidification of a Sn-Bi Alloy
journal, September 2015
- Gibbs, John W.; Tourret, Damien; Gibbs, Paul J.
- JOM, Vol. 68, Issue 1
3-D microstructural model of freckle formation validated using in situ experiments
journal, October 2014
- Karagadde, S.; Yuan, L.; Shevchenko, N.
- Acta Materialia, Vol. 79
In-situ three-dimensional microstructural investigation of solidification of an Al-Cu alloy by ultrafast x-ray microtomography
journal, June 2005
- Ludwig, Olivire; Dimichiel, Marco; Salvo, Luc
- Metallurgical and Materials Transactions A, Vol. 36, Issue 6
In situ investigation by X-ray tomography of the overall and local microstructural changes occurring during partial remelting of an Al–15.8wt.% Cu alloy
journal, May 2007
- Limodin, Nathalie; Salvo, Luc; Suéry, Michel
- Acta Materialia, Vol. 55, Issue 9
In situ and real-time 3-D microtomography investigation of dendritic solidification in an Al–10wt.% Cu alloy
journal, April 2009
- Limodin, N.; Salvo, L.; Boller, E.
- Acta Materialia, Vol. 57, Issue 7
In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification
journal, October 2014
- Puncreobutr, C.; Phillion, A. B.; Fife, J. L.
- Acta Materialia, Vol. 79
Coupling in situ synchrotron X-ray tomographic microscopy and numerical simulation to quantify the influence of intermetallic formation on permeability in aluminium–silicon–copper alloys
journal, February 2014
- Puncreobutr, C.; Phillion, A. B.; Fife, J. L.
- Acta Materialia, Vol. 64
The Three-Dimensional Morphology of Growing Dendrites
journal, July 2015
- Gibbs, J. W.; Mohan, K. A.; Gulsoy, E. B.
- Scientific Reports, Vol. 5, Issue 1
Fast synchrotron X-ray tomographic quantification of dendrite evolution during the solidification of Mg Sn alloys
journal, October 2016
- Shuai, Sansan; Guo, Enyu; Phillion, A. B.
- Acta Materialia, Vol. 118
4D synchrotron X-ray tomographic quantification of the transition from cellular to dendrite growth during directional solidification
journal, September 2016
- Cai, B.; Wang, J.; Kao, A.
- Acta Materialia, Vol. 117
Particle-induced morphological modification of Al alloy equiaxed dendrites revealed by sub-second in situ microtomography
journal, February 2017
- Daudin, R.; Terzi, S.; Lhuissier, P.
- Acta Materialia, Vol. 125
Finite element modelling of the actual structure of cellular materials determined by X-ray tomography
journal, February 2005
- Youssef, S.; Maire, E.; Gaertner, R.
- Acta Materialia, Vol. 53, Issue 3
Three dimensional experimental and numerical multiscale analysis of a fatigue crack
journal, April 2010
- Rannou, Johann; Limodin, Nathalie; Réthoré, Julien
- Computer Methods in Applied Mechanics and Engineering, Vol. 199, Issue 21-22
Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography
journal, October 2011
- Maire, Eric; Zhou, Suxia; Adrien, Jerome
- Engineering Fracture Mechanics, Vol. 78, Issue 15
Ductile damage in aluminium alloy thin sheets: Correlation between micro-tomography observations and mechanical modeling
journal, December 2012
- Thuillier, S.; Maire, E.; Brunet, M.
- Materials Science and Engineering: A, Vol. 558
Local Tomography Study of the Fracture of an ERG Metal Foam
journal, April 2013
- Zhang, Tao; Maire, Eric; Adrien, Jerome
- Advanced Engineering Materials, Vol. 15, Issue 8
In situ microtensile testing and X-ray microtomography-based finite element modelling of open-cell metal foam struts and sandwich panels
journal, June 2014
- Betts, Charles; Balint, Daniel; Lee, Junyi
- The Journal of Strain Analysis for Engineering Design, Vol. 49, Issue 8
20 Hz X-ray tomography during an in situ tensile test
journal, February 2016
- Maire, Eric; Le Bourlot, Christophe; Adrien, Jérôme
- International Journal of Fracture, Vol. 200, Issue 1-2
Quantitative Assessment of Deformation-Induced Damage in a Semisolid Aluminum Alloy via X-ray Microtomography
journal, July 2008
- Phillion, A. B.; Lee, P. D.; Maire, E.
- Metallurgical and Materials Transactions A, Vol. 39, Issue 10
In situ X-ray tomography observation of inhomogeneous deformation in semi-solid aluminium alloys
journal, September 2009
- Terzi, S.; Salvo, L.; Suéry, M.
- Scripta Materialia, Vol. 61, Issue 5, p. 449-452
Numerical tensile test on a mushy zone sample
journal, July 2012
- Zaragoci, Jean-François; Silva, Luisa; Bellet, Michel
- IOP Conference Series: Materials Science and Engineering, Vol. 33
Synchrotron Tomographic Characterization of Damage Evolution During Aluminum Alloy Solidification
journal, December 2012
- Puncreobutr, Chedtha; Lee, Peter D.; Hamilton, Richard W.
- Metallurgical and Materials Transactions A, Vol. 44, Issue 12
3-D granular modeling and in situ X-ray tomographic imaging: A comparative study of hot tearing formation and semi-solid deformation in Al–Cu alloys
journal, June 2013
- Sistaninia, M.; Terzi, S.; Phillion, A. B.
- Acta Materialia, Vol. 61, Issue 10
In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al–Cu alloy
journal, September 2014
- Cai, B.; Karagadde, S.; Yuan, L.
- Acta Materialia, Vol. 76
Revealing the micromechanisms behind semi-solid metal deformation with time-resolved X-ray tomography
journal, July 2014
- Kareh, K. M.; Lee, P. D.; Atwood, R. C.
- Nature Communications, Vol. 5, Issue 1
Transgranular liquation cracking of grains in the semi-solid state
journal, September 2015
- Karagadde, S.; Lee, P. D.; Cai, B.
- Nature Communications, Vol. 6, Issue 1
Time-resolved synchrotron tomographic quantification of deformation during indentation of an equiaxed semi-solid granular alloy
journal, February 2016
- Cai, B.; Lee, P. D.; Karagadde, S.
- Acta Materialia, Vol. 105
Three-Dimensional X-Ray Diffraction Microscopy
book, January 2004
- Poulsen, Henning
- Springer Tracts in Modern Physics
High-energy diffraction microscopy at the advanced photon source
journal, July 2011
- Lienert, U.; Li, S. F.; Hefferan, C. M.
- JOM, Vol. 63, Issue 7
Forward modeling method for microstructure reconstruction using x-ray diffraction microscopy: Single-crystal verification
journal, December 2006
- Suter, R. M.; Hennessy, D.; Xiao, C.
- Review of Scientific Instruments, Vol. 77, Issue 12
X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. II. The combined case
journal, March 2008
- Johnson, Greg; King, Andrew; Honnicke, Marcelo Goncalves
- Journal of Applied Crystallography, Vol. 41, Issue 2
Grain-resolved elastic strains in deformed copper measured by three-dimensional X-ray diffraction
journal, July 2011
- Oddershede, Jette; Schmidt, Søren; Poulsen, Henning Friis
- Materials Characterization, Vol. 62, Issue 7
Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysis
journal, July 2011
- Bernier, J. V.; Barton, N. R.; Lienert, U.
- The Journal of Strain Analysis for Engineering Design, Vol. 46, Issue 7
Solidification microstructures and solid-state parallels: Recent developments, future directions
journal, February 2009
- Asta, M.; Beckermann, C.; Karma, A.
- Acta Materialia, Vol. 57, Issue 4
Atomistic to continuum modeling of solidification microstructures
journal, February 2016
- Karma, Alain; Tourret, Damien
- Current Opinion in Solid State and Materials Science, Vol. 20, Issue 1
Modeling and characterization of grain structures and defects in solidification
journal, February 2016
- Rappaz, M.
- Current Opinion in Solid State and Materials Science, Vol. 20, Issue 1
Bounds and Self-Consistent Estimates for Creep of Polycrystalline Materials
journal, February 1976
- Hutchinson, J. W.
- Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 348, Issue 1652
A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys
journal, September 1993
- Lebensohn, R. A.; Tomé, C. N.
- Acta Metallurgica et Materialia, Vol. 41, Issue 9
A numerical method for computing the overall response of nonlinear composites with complex microstructure
journal, April 1998
- Moulinec, H.; Suquet, P.
- Computer Methods in Applied Mechanics and Engineering, Vol. 157, Issue 1-2
N-site modeling of a 3D viscoplastic polycrystal using Fast Fourier Transform
journal, August 2001
- A. Lebensohn, R.
- Acta Materialia, Vol. 49, Issue 14
A computational approach to handle complex microstructure geometries
journal, July 2003
- Moës, N.; Cloirec, M.; Cartraud, P.
- Computer Methods in Applied Mechanics and Engineering, Vol. 192, Issue 28-30
Some elements of microstructural mechanics
journal, May 2003
- Cailletaud, G.; Forest, S.; Jeulin, D.
- Computational Materials Science, Vol. 27, Issue 3
An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials
journal, May 2012
- Lebensohn, Ricardo A.; Kanjarla, Anand K.; Eisenlohr, Philip
- International Journal of Plasticity, Vol. 32-33
Polycrystal Plasticity: Comparison Between Grain - Scale Observations of Deformation and Simulations
journal, March 2014
- Pokharel, Reeju; Lind, Jonathan; Kanjarla, Anand K.
- Annual Review of Condensed Matter Physics, Vol. 5, Issue 1
In-situ observation of bulk 3D grain evolution during plastic deformation in polycrystalline Cu
journal, April 2015
- Pokharel, Reeju; Lind, Jonathan; Li, Shiu Fai
- International Journal of Plasticity, Vol. 67
Microstructural effects on damage evolution in shocked copper polycrystals
journal, September 2016
- Lieberman, Evan J.; Lebensohn, Ricardo A.; Menasche, David B.
- Acta Materialia, Vol. 116
Instantiation of crystal plasticity simulations for micromechanical modelling with direct input from microstructural data collected at light sources
journal, April 2017
- Pokharel, Reeju; Lebensohn, Ricardo A.
- Scripta Materialia, Vol. 132
In Situ tensile testing of solidifying aluminium and AlMg shells
journal, November 1985
- Ackermann, P.; Kurz, W.; Heinemann, W.
- Materials Science and Engineering, Vol. 75, Issue 1-2
Additive manufactured porous titanium structures: Through-process quantification of pore and strut networks
journal, November 2014
- Kim, Taek Bo; Yue, Sheng; Zhang, Ziyu
- Journal of Materials Processing Technology, Vol. 214, Issue 11
Study of Hot Tearing During Steel Solidification Through Ingot Punching Test and Its Numerical Simulation
journal, June 2016
- Koshikawa, Takao; Bellet, Michel; Gandin, Charles-André
- Metallurgical and Materials Transactions A, Vol. 47, Issue 8
Experimental study and two-phase numerical modeling of macrosegregation induced by solid deformation during punch pressing of solidifying steel ingots
journal, February 2017
- Koshikawa, Takao; Bellet, Michel; Gandin, Charles-André
- Acta Materialia, Vol. 124
Multiscale dendritic needle network model of alloy solidification
journal, October 2013
- Tourret, D.; Karma, A.
- Acta Materialia, Vol. 61, Issue 17
Three-dimensional dendritic needle network model for alloy solidification
journal, November 2016
- Tourret, D.; Karma, A.
- Acta Materialia, Vol. 120
In situ analysis of the influence of convection during the initial transient of planar solidification
journal, March 2011
- Bogno, A.; Reinhart, G.; Buffet, A.
- Journal of Crystal Growth, Vol. 318, Issue 1
Analysis by synchrotron X-ray radiography of convection effects on the dynamic evolution of the solid–liquid interface and on solute distribution during the initial transient of solidification
journal, June 2011
- Bogno, A.; Nguyen-Thi, H.; Buffet, A.
- Acta Materialia, Vol. 59, Issue 11
Three-dimensional Dendritic Needle Network model with application to Al-Cu directional solidification experiments
journal, June 2015
- Tourret, D.; Karma, A.; Clarke, A. J.
- IOP Conference Series: Materials Science and Engineering, Vol. 84
Three-Dimensional Multiscale Modeling of Dendritic Spacing Selection During Al-Si Directional Solidification
journal, May 2015
- Tourret, Damien; Clarke, Amy J.; Imhoff, Seth D.
- JOM, Vol. 67, Issue 8
Predictions of dendritic growth rates in the linearized solvability theory
journal, May 1989
- Barbieri, A.; Langer, J. S.
- Physical Review A, Vol. 39, Issue 10
The measurement of liquid diffusion coefficients in the Al-Cu system using temperature gradient zone melting
journal, November 1977
- Watson, M. P.; Hunt, J. D.
- Metallurgical Transactions A, Vol. 8, Issue 11
Solid-liquid surface energies in the AlCuAl2, AlNiAl3 and AlTi systems
journal, March 1996
- Maraşli, N.; Hunt, J. D.
- Acta Materialia, Vol. 44, Issue 3
Complete mapping of the anisotropic free energy of the crystal-melt interface in Al
journal, October 2002
- Morris, James R.
- Physical Review B, Vol. 66, Issue 14
An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals
journal, March 2015
- Chen, L.; Chen, J.; Lebensohn, R. A.
- Computer Methods in Applied Mechanics and Engineering, Vol. 285
The growth crystallography of unidirectionally solidified Al-Al3Ni and Al-Al2Cu eutectics
journal, July 1974
- Cantor, B.; Chadwick, G. A.
- Journal of Crystal Growth, Vol. 23, Issue 1
Coupled growth of Al-Al 2 Cu eutectics in Al-Cu-Ag alloys
journal, January 2012
- Hecht, U.; Witusiewicz, V.; Drevermann, A.
- IOP Conference Series: Materials Science and Engineering, Vol. 27
Continuum micro-mechanics of elastoplastic polycrystals
journal, April 1965
- Hill, R.
- Journal of the Mechanics and Physics of Solids, Vol. 13, Issue 2
Structural, elastic and electronic properties of θ (Al2Cu) and S (Al2CuMg) strengthening precipitates in Al–Cu–Mg series alloys: First-principles calculations
journal, December 2012
- Zhang, J.; Huang, Y. N.; Mao, C.
- Solid State Communications, Vol. 152, Issue 23
Length-scale dependent mechanical properties of Al-Cu eutectic alloy: Molecular dynamics based model and its experimental verification
journal, May 2014
- Tiwary, C. S.; Chakraborty, S.; Mahapatra, D. R.
- Journal of Applied Physics, Vol. 115, Issue 20
Plastic flow of γ-TiAl-based polysynthetically twinned crystals: micromechanical modeling and experimental validation
journal, August 1998
- Lebensohn, R.; Uhlenhut, H.; Hartig, C.
- Acta Materialia, Vol. 46, Issue 13
Columnar and Equiaxed Solidification of Al-7 wt.% Si Alloys in Reduced Gravity in the Framework of the CETSOL Project
journal, June 2017
- Zimmermann, G.; Sturz, L.; Nguyen-Thi, H.
- JOM, Vol. 69, Issue 8
Calculation of grain boundary normals directly from 3D microstructure images
journal, March 2015
- Lieberman, E. J.; Rollett, A. D.; Lebensohn, R. A.
- Modelling and Simulation in Materials Science and Engineering, Vol. 23, Issue 3
Microscale Characterization of Mechanical Properties
journal, August 2007
- Hemker, K. J.; Sharpe, W. N.
- Annual Review of Materials Research, Vol. 37, Issue 1
Micro- and nanoscale tensile testing of materials
journal, March 2009
- Gianola, D. S.; Eberl, C.
- JOM, Vol. 61, Issue 3
Micro-compression testing: A critical discussion of experimental constraints
journal, April 2009
- Kiener, D.; Motz, C.; Dehm, G.
- Materials Science and Engineering: A, Vol. 505, Issue 1-2
Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves
journal, November 2009
- Zhao, Y. H.; Guo, Y. Z.; Wei, Q.
- Materials Science and Engineering: A, Vol. 525, Issue 1-2
Works referencing / citing this record:
Demonstration of transmission high energy electron microscopy
journal, April 2018
- Merrill, F. E.; Goett, J.; Gibbs, J. W.
- Applied Physics Letters, Vol. 112, Issue 14
Correlation of Materials Property and Performance with Internal Structures Evolvement Revealed by Laboratory X-ray Tomography
journal, September 2018
- Zhang, Lei; Wang, Shaogang
- Materials, Vol. 11, Issue 10
Demonstration of transmission high energy electron microscopy
conference, January 2020
- Merrill, F. E.; Clarke, A. J.; Goett, J.
- SHOCK COMPRESSION OF CONDENSED MATTER - 2019: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, AIP Conference Proceedings
Correlation of Materials Property and Performance with Internal Structures Evolvement Revealed by Laboratory X-ray Tomography
journal, September 2018
- Zhang, Lei; Wang, Shaogang
- Materials, Vol. 11, Issue 10