skip to main content
DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Plasma–wall interaction studies within the EUROfusion consortium: progress on plasma-facing components development and qualification

Abstract

The provision of a particle and power exhaust solution which is compatible with first-wall components and edge-plasma conditions is a key area of present-day fusion research and mandatory for a successful operation of ITER and DEMO. The work package plasma-facing components (WP PFC) within the European fusion programme complements with laboratory experiments, i.e. in linear plasma devices, electron and ion beam loading facilities, the studies performed in toroidally confined magnetic devices, such as JET, ASDEX Upgrade, WEST etc. The connection of both groups is done via common physics and engineering studies, including the qualification and specification of plasma-facing components, and by modelling codes that simulate edge-plasma conditions and the plasma–material interaction as well as the study of fundamental processes. WP PFC addresses these critical points in order to ensure reliable and efficient use of conventional, solid PFCs in ITER (Be and W) and DEMO (W and steel) with respect to heat-load capabilities (transient and steady-state heat and particle loads), lifetime estimates (erosion, material mixing and surface morphology), and safety aspects (fuel retention, fuel removal, material migration and dust formation) particularly for quasi-steady-state conditions. Alternative scenarios and concepts (liquid Sn or Li as PFCs) for DEMO are developed and tested inmore » the event that the conventional solution turns out to not be functional. Here, we present an overview of the activities with an emphasis on a few key results: (i) the observed synergistic effects in particle and heat loading of ITER-grade W with the available set of exposition devices on material properties such as roughness, ductility and microstructure; (ii) the progress in understanding of fuel retention, diffusion and outgassing in different W-based materials, including the impact of damage and impurities like N; and (iii), the preferential sputtering of Fe in EUROFER steel providing an in situ W surface and a potential first-wall solution for DEMO.« less

Authors:
ORCiD logo; ORCiD logo; ; ; ; ; ; ; ; ORCiD logo; ; ; ; ; ; ORCiD logo; ORCiD logo; ; ORCiD logo; ORCiD logo more »; ; ; ; ; ORCiD logo; ; ; ORCiD logo; ; ORCiD logo; ORCiD logo; ; ; ; ; ORCiD logo; ; ; ORCiD logo; ; ; ; ; ; ORCiD logo; ; ; ORCiD logo; ORCiD logo; ; ; ORCiD logo; ; ; ; ; ; ; ; ; ORCiD logo; ORCiD logo; ; ; ; ; ; ; ; ; ; ; ; ; ORCiD logo; ; ORCiD logo; ; ; ; ORCiD logo; ; ORCiD logo; ; ; ORCiD logo; ; ; ; ; ORCiD logo; ; ORCiD logo; ; ; ORCiD logo; ORCiD logo; ORCiD logo; ORCiD logo; ; ; ; ; ; ; ; ORCiD logo; ; ; ; ORCiD logo; ORCiD logo; ORCiD logo; ; ; ; ; ORCiD logo; ORCiD logo; ORCiD logo; ; ; ORCiD logo; ORCiD logo; ; ; ; ; ORCiD logo; ORCiD logo; ; ORCiD logo; ; ; ORCiD logo; ; ORCiD logo; ORCiD logo; ; ; ; ORCiD logo; ; ORCiD logo; ; ; ; ORCiD logo; ; ; ; ; ; ORCiD logo; ; ; ORCiD logo; ; ; ORCiD logo; ; ; ; ; ; ORCiD logo; ; ORCiD logo; ORCiD logo; ; ORCiD logo; ; ; ORCiD logo; ; ORCiD logo; ; ; ; ORCiD logo; ORCiD logo; ; ORCiD logo « less
Publication Date:
Research Org.:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Sponsoring Org.:
USDOE; European Commission (EC)
Contributing Org.:
EUROfusion Consortium
OSTI Identifier:
1394582
Grant/Contract Number:  
AC05-00OR22725; 633053
Resource Type:
Accepted Manuscript
Journal Name:
Nuclear Fusion
Additional Journal Information:
Journal Volume: 57; Journal Issue: 11; Journal ID: ISSN 0029-5515
Publisher:
IOP Science
Country of Publication:
United States
Language:
English
Subject:
70 PLASMA PHYSICS AND FUSION TECHNOLOGY; plasma-facing components; plasma-surface interaction; power exhaust; particle exhaust; tungsten; beryllium

Citation Formats

Brezinsek, S., Coenen, J. W., Schwarz-Selinger, T., Schmid, K., Kirschner, A., Hakola, A., Tabares, F. L., van der Meiden, H. J., Mayoral, M. -L., Reinhart, M., Tsitrone, E., Ahlgren, T., Aints, M., Airila, M., Almaviva, S., Alves, E., Angot, T., Anita, V., Arredondo Parra, R., Aumayr, F., Balden, M., Bauer, J., Ben Yaala, M., Berger, B. M., Bisson, R., Björkas, C., Bogdanovic Radovic, I., Borodin, D., Bucalossi, J., Butikova, J., Butoi, B., Čadež, I., Caniello, R., Caneve, L., Cartry, G., Catarino, N., Čekada, M., Ciraolo, G., Ciupinski, L., Colao, F., Corre, Y., Costin, C., Craciunescu, T., Cremona, A., De Angeli, M., de Castro, A., Dejarnac, R., Dellasega, D., Dinca, P., Dittmar, T., Dobrea, C., Hansen, P., Drenik, A., Eich, T., Elgeti, S., Falie, D., Fedorczak, N., Ferro, Y., Fornal, T., Fortuna-Zalesna, E., Gao, L., Gasior, P., Gherendi, M., Ghezzi, F., Gosar, Ž., Greuner, H., Grigore, E., Grisolia, C., Groth, M., Gruca, M., Grzonka, J., Gunn, J. P., Hassouni, K., Heinola, K., Höschen, T., Huber, S., Jacob, W., Jepu, I., Jiang, X., Jogi, I., Kaiser, A., Karhunen, J., Kelemen, M., Köppen, M., Koslowski, H. R., Kreter, A., Kubkowska, M., Laan, M., Laguardia, L., Lahtinen, A., Lasa, A., Lazic, V., Lemahieu, N., Likonen, J., Linke, J., Litnovsky, A., Linsmeier, Ch., Loewenhoff, T., Lungu, C., Lungu, M., Maddaluno, G., Maier, H., Makkonen, T., Manhard, A., Marandet, Y., Markelj, S., Marot, L., Martin, C., Martin-Rojo, A. B., Martynova, Y., Mateus, R., Matveev, D., Mayer, M., Meisl, G., Mellet, N., Michau, A., Miettunen, J., Möller, S., Morgan, T. W., Mougenot, J., Mozetič, M., Nemanič, V., Neu, R., Nordlund, K., Oberkofler, M., Oyarzabal, E., Panjan, M., Pardanaud, C., Paris, P., Passoni, M., Pegourie, B., Pelicon, P., Petersson, P., Piip, K., Pintsuk, G., Pompilian, G. O., Popa, G., Porosnicu, C., Primc, G., Probst, M., Räisänen, J., Rasinski, M., Ratynskaia, S., Reiser, D., Ricci, D., Richou, M., Riesch, J., Riva, G., Rosinski, M., Roubin, P., Rubel, M., Ruset, C., Safi, E., Sergienko, G., Siketic, Z., Sima, A., Spilker, B., Stadlmayr, R., Steudel, I., Ström, P., Tadic, T., Tafalla, D., Tale, I., Terentyev, D., Terra, A., Tiron, V., Tiseanu, I., Tolias, P., Tskhakaya, D., Uccello, A., Unterberg, B., Uytdenhoven, I., Vassallo, E., Vavpetič, P., Veis, P., Velicu, I. L., Vernimmen, J. W. M., Voitkans, A., von Toussaint, U., Weckmann, A., Wirtz, M., Založnik, A., and Zaplotnik, R. Plasma–wall interaction studies within the EUROfusion consortium: progress on plasma-facing components development and qualification. United States: N. p., 2017. Web. https://doi.org/10.1088/1741-4326/aa796e.
Brezinsek, S., Coenen, J. W., Schwarz-Selinger, T., Schmid, K., Kirschner, A., Hakola, A., Tabares, F. L., van der Meiden, H. J., Mayoral, M. -L., Reinhart, M., Tsitrone, E., Ahlgren, T., Aints, M., Airila, M., Almaviva, S., Alves, E., Angot, T., Anita, V., Arredondo Parra, R., Aumayr, F., Balden, M., Bauer, J., Ben Yaala, M., Berger, B. M., Bisson, R., Björkas, C., Bogdanovic Radovic, I., Borodin, D., Bucalossi, J., Butikova, J., Butoi, B., Čadež, I., Caniello, R., Caneve, L., Cartry, G., Catarino, N., Čekada, M., Ciraolo, G., Ciupinski, L., Colao, F., Corre, Y., Costin, C., Craciunescu, T., Cremona, A., De Angeli, M., de Castro, A., Dejarnac, R., Dellasega, D., Dinca, P., Dittmar, T., Dobrea, C., Hansen, P., Drenik, A., Eich, T., Elgeti, S., Falie, D., Fedorczak, N., Ferro, Y., Fornal, T., Fortuna-Zalesna, E., Gao, L., Gasior, P., Gherendi, M., Ghezzi, F., Gosar, Ž., Greuner, H., Grigore, E., Grisolia, C., Groth, M., Gruca, M., Grzonka, J., Gunn, J. P., Hassouni, K., Heinola, K., Höschen, T., Huber, S., Jacob, W., Jepu, I., Jiang, X., Jogi, I., Kaiser, A., Karhunen, J., Kelemen, M., Köppen, M., Koslowski, H. R., Kreter, A., Kubkowska, M., Laan, M., Laguardia, L., Lahtinen, A., Lasa, A., Lazic, V., Lemahieu, N., Likonen, J., Linke, J., Litnovsky, A., Linsmeier, Ch., Loewenhoff, T., Lungu, C., Lungu, M., Maddaluno, G., Maier, H., Makkonen, T., Manhard, A., Marandet, Y., Markelj, S., Marot, L., Martin, C., Martin-Rojo, A. B., Martynova, Y., Mateus, R., Matveev, D., Mayer, M., Meisl, G., Mellet, N., Michau, A., Miettunen, J., Möller, S., Morgan, T. W., Mougenot, J., Mozetič, M., Nemanič, V., Neu, R., Nordlund, K., Oberkofler, M., Oyarzabal, E., Panjan, M., Pardanaud, C., Paris, P., Passoni, M., Pegourie, B., Pelicon, P., Petersson, P., Piip, K., Pintsuk, G., Pompilian, G. O., Popa, G., Porosnicu, C., Primc, G., Probst, M., Räisänen, J., Rasinski, M., Ratynskaia, S., Reiser, D., Ricci, D., Richou, M., Riesch, J., Riva, G., Rosinski, M., Roubin, P., Rubel, M., Ruset, C., Safi, E., Sergienko, G., Siketic, Z., Sima, A., Spilker, B., Stadlmayr, R., Steudel, I., Ström, P., Tadic, T., Tafalla, D., Tale, I., Terentyev, D., Terra, A., Tiron, V., Tiseanu, I., Tolias, P., Tskhakaya, D., Uccello, A., Unterberg, B., Uytdenhoven, I., Vassallo, E., Vavpetič, P., Veis, P., Velicu, I. L., Vernimmen, J. W. M., Voitkans, A., von Toussaint, U., Weckmann, A., Wirtz, M., Založnik, A., & Zaplotnik, R. Plasma–wall interaction studies within the EUROfusion consortium: progress on plasma-facing components development and qualification. United States. https://doi.org/10.1088/1741-4326/aa796e
Brezinsek, S., Coenen, J. W., Schwarz-Selinger, T., Schmid, K., Kirschner, A., Hakola, A., Tabares, F. L., van der Meiden, H. J., Mayoral, M. -L., Reinhart, M., Tsitrone, E., Ahlgren, T., Aints, M., Airila, M., Almaviva, S., Alves, E., Angot, T., Anita, V., Arredondo Parra, R., Aumayr, F., Balden, M., Bauer, J., Ben Yaala, M., Berger, B. M., Bisson, R., Björkas, C., Bogdanovic Radovic, I., Borodin, D., Bucalossi, J., Butikova, J., Butoi, B., Čadež, I., Caniello, R., Caneve, L., Cartry, G., Catarino, N., Čekada, M., Ciraolo, G., Ciupinski, L., Colao, F., Corre, Y., Costin, C., Craciunescu, T., Cremona, A., De Angeli, M., de Castro, A., Dejarnac, R., Dellasega, D., Dinca, P., Dittmar, T., Dobrea, C., Hansen, P., Drenik, A., Eich, T., Elgeti, S., Falie, D., Fedorczak, N., Ferro, Y., Fornal, T., Fortuna-Zalesna, E., Gao, L., Gasior, P., Gherendi, M., Ghezzi, F., Gosar, Ž., Greuner, H., Grigore, E., Grisolia, C., Groth, M., Gruca, M., Grzonka, J., Gunn, J. P., Hassouni, K., Heinola, K., Höschen, T., Huber, S., Jacob, W., Jepu, I., Jiang, X., Jogi, I., Kaiser, A., Karhunen, J., Kelemen, M., Köppen, M., Koslowski, H. R., Kreter, A., Kubkowska, M., Laan, M., Laguardia, L., Lahtinen, A., Lasa, A., Lazic, V., Lemahieu, N., Likonen, J., Linke, J., Litnovsky, A., Linsmeier, Ch., Loewenhoff, T., Lungu, C., Lungu, M., Maddaluno, G., Maier, H., Makkonen, T., Manhard, A., Marandet, Y., Markelj, S., Marot, L., Martin, C., Martin-Rojo, A. B., Martynova, Y., Mateus, R., Matveev, D., Mayer, M., Meisl, G., Mellet, N., Michau, A., Miettunen, J., Möller, S., Morgan, T. W., Mougenot, J., Mozetič, M., Nemanič, V., Neu, R., Nordlund, K., Oberkofler, M., Oyarzabal, E., Panjan, M., Pardanaud, C., Paris, P., Passoni, M., Pegourie, B., Pelicon, P., Petersson, P., Piip, K., Pintsuk, G., Pompilian, G. O., Popa, G., Porosnicu, C., Primc, G., Probst, M., Räisänen, J., Rasinski, M., Ratynskaia, S., Reiser, D., Ricci, D., Richou, M., Riesch, J., Riva, G., Rosinski, M., Roubin, P., Rubel, M., Ruset, C., Safi, E., Sergienko, G., Siketic, Z., Sima, A., Spilker, B., Stadlmayr, R., Steudel, I., Ström, P., Tadic, T., Tafalla, D., Tale, I., Terentyev, D., Terra, A., Tiron, V., Tiseanu, I., Tolias, P., Tskhakaya, D., Uccello, A., Unterberg, B., Uytdenhoven, I., Vassallo, E., Vavpetič, P., Veis, P., Velicu, I. L., Vernimmen, J. W. M., Voitkans, A., von Toussaint, U., Weckmann, A., Wirtz, M., Založnik, A., and Zaplotnik, R. Wed . "Plasma–wall interaction studies within the EUROfusion consortium: progress on plasma-facing components development and qualification". United States. https://doi.org/10.1088/1741-4326/aa796e. https://www.osti.gov/servlets/purl/1394582.
@article{osti_1394582,
title = {Plasma–wall interaction studies within the EUROfusion consortium: progress on plasma-facing components development and qualification},
author = {Brezinsek, S. and Coenen, J. W. and Schwarz-Selinger, T. and Schmid, K. and Kirschner, A. and Hakola, A. and Tabares, F. L. and van der Meiden, H. J. and Mayoral, M. -L. and Reinhart, M. and Tsitrone, E. and Ahlgren, T. and Aints, M. and Airila, M. and Almaviva, S. and Alves, E. and Angot, T. and Anita, V. and Arredondo Parra, R. and Aumayr, F. and Balden, M. and Bauer, J. and Ben Yaala, M. and Berger, B. M. and Bisson, R. and Björkas, C. and Bogdanovic Radovic, I. and Borodin, D. and Bucalossi, J. and Butikova, J. and Butoi, B. and Čadež, I. and Caniello, R. and Caneve, L. and Cartry, G. and Catarino, N. and Čekada, M. and Ciraolo, G. and Ciupinski, L. and Colao, F. and Corre, Y. and Costin, C. and Craciunescu, T. and Cremona, A. and De Angeli, M. and de Castro, A. and Dejarnac, R. and Dellasega, D. and Dinca, P. and Dittmar, T. and Dobrea, C. and Hansen, P. and Drenik, A. and Eich, T. and Elgeti, S. and Falie, D. and Fedorczak, N. and Ferro, Y. and Fornal, T. and Fortuna-Zalesna, E. and Gao, L. and Gasior, P. and Gherendi, M. and Ghezzi, F. and Gosar, Ž. and Greuner, H. and Grigore, E. and Grisolia, C. and Groth, M. and Gruca, M. and Grzonka, J. and Gunn, J. P. and Hassouni, K. and Heinola, K. and Höschen, T. and Huber, S. and Jacob, W. and Jepu, I. and Jiang, X. and Jogi, I. and Kaiser, A. and Karhunen, J. and Kelemen, M. and Köppen, M. and Koslowski, H. R. and Kreter, A. and Kubkowska, M. and Laan, M. and Laguardia, L. and Lahtinen, A. and Lasa, A. and Lazic, V. and Lemahieu, N. and Likonen, J. and Linke, J. and Litnovsky, A. and Linsmeier, Ch. and Loewenhoff, T. and Lungu, C. and Lungu, M. and Maddaluno, G. and Maier, H. and Makkonen, T. and Manhard, A. and Marandet, Y. and Markelj, S. and Marot, L. and Martin, C. and Martin-Rojo, A. B. and Martynova, Y. and Mateus, R. and Matveev, D. and Mayer, M. and Meisl, G. and Mellet, N. and Michau, A. and Miettunen, J. and Möller, S. and Morgan, T. W. and Mougenot, J. and Mozetič, M. and Nemanič, V. and Neu, R. and Nordlund, K. and Oberkofler, M. and Oyarzabal, E. and Panjan, M. and Pardanaud, C. and Paris, P. and Passoni, M. and Pegourie, B. and Pelicon, P. and Petersson, P. and Piip, K. and Pintsuk, G. and Pompilian, G. O. and Popa, G. and Porosnicu, C. and Primc, G. and Probst, M. and Räisänen, J. and Rasinski, M. and Ratynskaia, S. and Reiser, D. and Ricci, D. and Richou, M. and Riesch, J. and Riva, G. and Rosinski, M. and Roubin, P. and Rubel, M. and Ruset, C. and Safi, E. and Sergienko, G. and Siketic, Z. and Sima, A. and Spilker, B. and Stadlmayr, R. and Steudel, I. and Ström, P. and Tadic, T. and Tafalla, D. and Tale, I. and Terentyev, D. and Terra, A. and Tiron, V. and Tiseanu, I. and Tolias, P. and Tskhakaya, D. and Uccello, A. and Unterberg, B. and Uytdenhoven, I. and Vassallo, E. and Vavpetič, P. and Veis, P. and Velicu, I. L. and Vernimmen, J. W. M. and Voitkans, A. and von Toussaint, U. and Weckmann, A. and Wirtz, M. and Založnik, A. and Zaplotnik, R.},
abstractNote = {The provision of a particle and power exhaust solution which is compatible with first-wall components and edge-plasma conditions is a key area of present-day fusion research and mandatory for a successful operation of ITER and DEMO. The work package plasma-facing components (WP PFC) within the European fusion programme complements with laboratory experiments, i.e. in linear plasma devices, electron and ion beam loading facilities, the studies performed in toroidally confined magnetic devices, such as JET, ASDEX Upgrade, WEST etc. The connection of both groups is done via common physics and engineering studies, including the qualification and specification of plasma-facing components, and by modelling codes that simulate edge-plasma conditions and the plasma–material interaction as well as the study of fundamental processes. WP PFC addresses these critical points in order to ensure reliable and efficient use of conventional, solid PFCs in ITER (Be and W) and DEMO (W and steel) with respect to heat-load capabilities (transient and steady-state heat and particle loads), lifetime estimates (erosion, material mixing and surface morphology), and safety aspects (fuel retention, fuel removal, material migration and dust formation) particularly for quasi-steady-state conditions. Alternative scenarios and concepts (liquid Sn or Li as PFCs) for DEMO are developed and tested in the event that the conventional solution turns out to not be functional. Here, we present an overview of the activities with an emphasis on a few key results: (i) the observed synergistic effects in particle and heat loading of ITER-grade W with the available set of exposition devices on material properties such as roughness, ductility and microstructure; (ii) the progress in understanding of fuel retention, diffusion and outgassing in different W-based materials, including the impact of damage and impurities like N; and (iii), the preferential sputtering of Fe in EUROFER steel providing an in situ W surface and a potential first-wall solution for DEMO.},
doi = {10.1088/1741-4326/aa796e},
journal = {Nuclear Fusion},
number = 11,
volume = 57,
place = {United States},
year = {2017},
month = {6}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 14 works
Citation information provided by
Web of Science

Save / Share:

Works referenced in this record:

Multiscale modelling of plasma–wall interactions in fusion reactor conditions
journal, May 2014


Quantitative modeling of fuel retention in the JET-C and JET-ILW wall configurations by WallDYN and predictions for ITER
journal, August 2015


High density operation for reactor-relevant power exhaust
journal, August 2015


The new electron beam test facility JUDITH II for high heat flux experiments on plasma facing components
journal, November 2005


High heat flux facility GLADIS:
journal, August 2007


Linear Plasma Device PSI-2 for Plasma-Material Interaction Studies
journal, July 2015

  • Kreter, A.; Brandt, C.; Huber, A.
  • Fusion Science and Technology, Vol. 68, Issue 1
  • DOI: 10.13182/FST14-906

Extreme hydrogen plasma densities achieved in a linear plasma generator
journal, March 2007

  • van Rooij, G. J.; Veremiyenko, V. P.; Goedheer, W. J.
  • Applied Physics Letters, Vol. 90, Issue 12
  • DOI: 10.1063/1.2716208

Plasma-surface interaction in the Be/W environment: Conclusions drawn from the JET-ILW for ITER
journal, August 2015


Impurity seeding for tokamak power exhaust: from present devices via ITER to DEMO
journal, November 2013


The WEST project: Testing ITER divertor high heat flux component technology in a steady state tokamak environment
journal, October 2014


Key issues in plasma–wall interactions for ITER: a European approach
journal, November 2003


Recent progress in research on tungsten materials for nuclear fusion applications in Europe
journal, January 2013


LIBS analysis of tungsten coatings exposed to Magnum PSI ELM-like plasma
journal, August 2015


Impact of combined hydrogen plasma and transient heat loads on the performance of tungsten as plasma facing material
journal, November 2015


Dust remobilization in fusion plasmas under steady state conditions
journal, January 2016


Fuel retention studies with the ITER-Like Wall in JET
journal, July 2013


1D kinetic modelling of the JET SOL with tungsten divertor plates
journal, July 2013


Quasineutral plasma expansion into infinite vacuum as a model for parallel ELM transport
journal, May 2013


Interaction of nitrogen ions with beryllium surfaces
journal, December 2014

  • Dobes, Katharina; Köppen, Martin; Oberkofler, Martin
  • Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 340
  • DOI: 10.1016/j.nimb.2014.06.025

Erosion of a-C:H in the afterglow of ammonia plasma
journal, July 2016


Ammonia formation in N2/H2 plasmas on ITER-relevant plasma facing materials: Surface temperature and N2 plasma content effects
journal, August 2015


Beryllium-tungsten study on mixed layers obtained by m-HiPIMS/DCMS techniques in a deuterium and nitrogen reactive gas mixture
journal, July 2017


Use of the near vacuum UV spectral range for the analysis of W-based materials for fusion applications using LIBS
journal, January 2016


In situ measurements of fuel retention by laser induced desorption spectroscopy in TEXTOR
journal, December 2011


Super-saturated hydrogen effects on radiation damages in tungsten under the high-flux divertor plasma irradiation
journal, July 2015


Erosion study of Fe–W binary mixed layer prepared as model system for RAFM steel
journal, August 2015


Ion beam analysis of tungsten layers in EUROFER model systems and carbon plasma facing components
journal, March 2016

  • Ström, Petter; Petersson, Per; Rubel, Marek
  • Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 371
  • DOI: 10.1016/j.nimb.2015.09.024

EUROFER as wall material: Reduced sputtering yields due to W surface enrichment
journal, November 2014


Laboratory experiments of uptake and release of hydrogen isotopes in liquid lithium
journal, August 2015


Potential and limits of water cooled divertor concepts based on monoblock design as possible candidates for a DEMO reactor
journal, October 2013


    Works referencing / citing this record:

    Total and partial electron impact ionization cross sections of fusion-relevant diatomic molecules
    journal, January 2019

    • Huber, Stefan E.; Mauracher, Andreas; Süß, Daniel
    • The Journal of Chemical Physics, Vol. 150, Issue 2
    • DOI: 10.1063/1.5063767