skip to main content
DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Environmental and Economic Implications of Distributed Additive Manufacturing

Authors:
ORCiD logo [1];  [2];  [3];  [4];  [4];  [5];  [6]
  1. McCormick School of Engineering and Applied Science, Northwestern University, Evanston IL USA
  2. Energy Systems Division, Argonne National Laboratory in Argonne, IL USA
  3. Global Security Sciences Division, Argonne National Laboratory and Northwestern-Argonne Institute of Science and Engineering in Argonne, IL USA
  4. Oak Ridge National Laboratory, Oak Ridge TN USA
  5. Advanced Manufacturing Office U.S. Department of Energy, Washington DC USA
  6. Department of Mechanical Engineering, Department of Chemical and Biological Engineering, Northwestern University, Evanston IL USA
Publication Date:
Research Org.:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Argonne National Lab. (ANL), Argonne, IL (United States)
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Advanced Manufacturing Office (EE-5A)
OSTI Identifier:
1376981
Alternate Identifier(s):
OSTI ID: 1376982; OSTI ID: 1399380; OSTI ID: 1404715
Grant/Contract Number:  
[AC02-06CH11357; AC05-00OR22725]
Resource Type:
Published Article
Journal Name:
Journal of Industrial Ecology
Additional Journal Information:
[Journal Name: Journal of Industrial Ecology]; Journal ID: ISSN 1088-1980
Country of Publication:
United States
Language:
English
Subject:
54 ENVIRONMENTAL SCIENCES

Citation Formats

Huang, Runze, Riddle, Matthew E., Graziano, Diane, Das, Sujit, Nimbalkar, Sachin, Cresko, Joe, and Masanet, Eric. Environmental and Economic Implications of Distributed Additive Manufacturing. United States: N. p., 2017. Web. doi:10.1111/jiec.12641.
Huang, Runze, Riddle, Matthew E., Graziano, Diane, Das, Sujit, Nimbalkar, Sachin, Cresko, Joe, & Masanet, Eric. Environmental and Economic Implications of Distributed Additive Manufacturing. United States. doi:10.1111/jiec.12641.
Huang, Runze, Riddle, Matthew E., Graziano, Diane, Das, Sujit, Nimbalkar, Sachin, Cresko, Joe, and Masanet, Eric. Sat . "Environmental and Economic Implications of Distributed Additive Manufacturing". United States. doi:10.1111/jiec.12641.
@article{osti_1376981,
title = {Environmental and Economic Implications of Distributed Additive Manufacturing},
author = {Huang, Runze and Riddle, Matthew E. and Graziano, Diane and Das, Sujit and Nimbalkar, Sachin and Cresko, Joe and Masanet, Eric},
abstractNote = {},
doi = {10.1111/jiec.12641},
journal = {Journal of Industrial Ecology},
number = ,
volume = ,
place = {United States},
year = {2017},
month = {8}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record
DOI: 10.1111/jiec.12641

Citation Metrics:
Cited by: 4 works
Citation information provided by
Web of Science

Save / Share:

Works referenced in this record:

Environmental Impacts of Distributed Manufacturing from 3-D Printing of Polymer Components and Products
journal, January 2013


Agent-based distributed manufacturing control: A state-of-the-art survey
journal, October 2009


Investigation on conformal cooling system design in injection molding
journal, June 2013

  • Hsu, F. H.; Wang, K.; Huang, C. T.
  • Advances in Production Engineering & Management, Vol. 8, Issue 2
  • DOI: 10.14743/apem2013.2.158

Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components
journal, November 2016


Assessing the environmental impact of metal production processes
journal, January 2007


Survey of the die and mold manufacturing industry - practices in Germany, Japan, and the United States
journal, May 1996

  • Fallböhmer, P.; Altan, T.; Tönshoff, H. -K.
  • Journal of Materials Processing Technology, Vol. 59, Issue 1-2
  • DOI: 10.1016/0924-0136(96)02297-2

A comparison of the energy efficiency of selective laser sintering and injection molding of nylon parts
journal, September 2012


Unit process energy consumption models for material removal processes
journal, January 2011


Additive manufacturing in the spare parts supply chain
journal, January 2014


Environmental aspects of laser-based and conventional tool and die manufacturing
journal, January 2007


Material efficiency: A white paper
journal, January 2011


Analysis of thermal cycling efficiency and optimal design of heating/cooling systems for rapid heat cycle injection molding process
journal, August 2010


Intrinsic innovations of die sinking electrical discharge machining technology: estimation of its impact
journal, January 2009

  • Peças, P.; Henriques, E.
  • The International Journal of Advanced Manufacturing Technology, Vol. 44, Issue 9-10
  • DOI: 10.1007/s00170-008-1902-x

Performance measures and metrics in a supply chain environment
journal, January 2001

  • Gunasekaran, A.; Patel, C.; Tirtiroglu, E.
  • International Journal of Operations & Production Management, Vol. 21, Issue 1/2
  • DOI: 10.1108/01443570110358468

Resource Efficient Injection Moulding with Low Environmental Impacts
journal, March 2013

  • Gantar, Gašper; Glojek, Andrej; Mori, Mitja
  • Strojniški vestnik – Journal of Mechanical Engineering, Vol. 59, Issue 3
  • DOI: 10.5545/sv-jme.2012.661

Life Cycle Assessment of Metals: A Scientific Synthesis
journal, July 2014


Rapid manufacturing facilitated customization
journal, April 2008

  • Tuck, C. J.; Hague, R. J. M.; Ruffo, M.
  • International Journal of Computer Integrated Manufacturing, Vol. 21, Issue 3
  • DOI: 10.1080/09511920701216238

Overview of Current Additive Manufacturing Technologies and Selected Applications
journal, September 2012


Rapid prototyping: energy and environment in the spotlight
journal, January 2006


Energy consumption in powder metallurgical manufacturing
journal, February 2012


Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis
journal, October 2014


An Environmental Analysis of Machining
conference, January 2004

  • Dahmus, Jeffrey B.; Gutowski, Timothy G.
  • ASME 2004 International Mechanical Engineering Congress and Exposition, Manufacturing Engineering and Materials Handling Engineering
  • DOI: 10.1115/IMECE2004-62600

Smart manufacturing, manufacturing intelligence and demand-dynamic performance
journal, December 2012


Additive manufacturing and its societal impact: a literature review
journal, October 2012

  • Huang, Samuel H.; Liu, Peng; Mokasdar, Abhiram
  • The International Journal of Advanced Manufacturing Technology, Vol. 67, Issue 5-8
  • DOI: 10.1007/s00170-012-4558-5

Metal Additive Manufacturing: A Review
journal, April 2014