Modification of adhered dust on plasma-facing surfaces due to exposure to ELMy H-mode plasma in DIII-D

Bykov, I.; Rudakov, D. L.; Ratynskaia, S.; Tolias, P.; De Angeli, M.; Hollmann, E. M.; McLean, A. G.; Lasnier, C. J.; Riva, G.

doi:10.1016/j.nme.2017.05.006

Title: Modification of adhered dust on plasma-facing surfaces due to exposure to ELMy H-mode plasma in DIII-D

Authors:: Bykov, I.; Rudakov, D. L.; Ratynskaia, S.; Tolias, P.; De Angeli, M.; Hollmann, E. M.; McLean, A. G.; Lasnier, C. J.; Riva, G.

Publication Date:: Tue Aug 01 00:00:00 EDT 2017

Sponsoring Org.:: USDOE

OSTI Identifier:: 1364063

Grant/Contract Number:: FG02-07ER54917 a; FC02-04ER54698 c; AC5207NA27344

Resource Type:: Published Article

Journal Name:: Nuclear Materials and Energy

Additional Journal Information:: Journal Name: Nuclear Materials and Energy Journal Volume: 12 Journal Issue: C; Journal ID: ISSN 2352-1791

Publisher:: Elsevier

Country of Publication:: Netherlands

Language:: English

Citation Formats


                    Bykov, I., Rudakov, D. L., Ratynskaia, S., Tolias, P., De Angeli, M., Hollmann, E. M., McLean, A. G., Lasnier, C. J., and Riva, G. Modification of adhered dust on plasma-facing surfaces due to exposure to ELMy H-mode plasma in DIII-D.  Netherlands: N. p., 2017. 
Web.  doi:10.1016/j.nme.2017.05.006.

Copy to clipboard


                    Bykov, I., Rudakov, D. L., Ratynskaia, S., Tolias, P., De Angeli, M., Hollmann, E. M., McLean, A. G., Lasnier, C. J., & Riva, G. Modification of adhered dust on plasma-facing surfaces due to exposure to ELMy H-mode plasma in DIII-D.  Netherlands.  https://doi.org/10.1016/j.nme.2017.05.006

Copy to clipboard


                    Bykov, I., Rudakov, D. L., Ratynskaia, S., Tolias, P., De Angeli, M., Hollmann, E. M., McLean, A. G., Lasnier, C. J., and Riva, G. Tue .  
"Modification of adhered dust on plasma-facing surfaces due to exposure to ELMy H-mode plasma in DIII-D".  Netherlands.  https://doi.org/10.1016/j.nme.2017.05.006.

Copy to clipboard


                    
@article{osti_1364063,

  title        = {Modification of adhered dust on plasma-facing surfaces due to exposure to ELMy H-mode plasma in DIII-D},

  author       = {Bykov, I. and Rudakov, D. L. and Ratynskaia, S. and Tolias, P. and De Angeli, M. and Hollmann, E. M. and McLean, A. G. and Lasnier, C. J. and Riva, G.},

  abstractNote = {},

  doi          = {10.1016/j.nme.2017.05.006},

  journal      = {Nuclear Materials and Energy},

  number       = C,

  volume       = 12,

  place        = {Netherlands},

  year         = {Tue Aug 01 00:00:00 EDT 2017},

  month        = {Tue Aug 01 00:00:00 EDT 2017}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Publisher's Version of Record
https://doi.org/10.1016/j.nme.2017.05.006

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 4 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Recent sheath physics studies on DIII-D
journal, August 2015

Watkins, J. G.; Labombard, B.; Stangeby, P. C.
Journal of Nuclear Materials, Vol. 463
DOI: 10.1016/j.jnucmat.2014.12.109

A full tungsten divertor for ITER: Physics issues and design status
journal, July 2013

Pitts, R. A.; Carpentier, S.; Escourbiac, F.
Journal of Nuclear Materials, Vol. 438
DOI: 10.1016/j.jnucmat.2013.01.008

Initial operation of the divertor Thomson scattering diagnostic on DIII-D
journal, February 1997

Carlstrom, T. N.; Hsieh, C. L.; Stockdale, R.
Review of Scientific Instruments, Vol. 68, Issue 2
DOI: 10.1063/1.1147893

Can aluminium or magnesium be a surrogate for beryllium: A critical investigation of their chemistry
journal, October 2013

Marot, Laurent; Linsmeier, Christian; Eren, Baran
Fusion Engineering and Design, Vol. 88, Issue 9-10
DOI: 10.1016/j.fusengdes.2013.04.040

Dust remobilization in fusion plasmas under steady state conditions
journal, January 2016

Tolias, P.; Ratynskaia, S.; De Angeli, M.
Plasma Physics and Controlled Fusion, Vol. 58, Issue 2
DOI: 10.1088/0741-3335/58/2/025009

Migration of artificially introduced micron-size carbon dust in the DIII-D divertor
journal, June 2007

Rudakov, D. L.; West, W. P.; Wong, C. P. C.
Journal of Nuclear Materials, Vol. 363-365
DOI: 10.1016/j.jnucmat.2007.01.013

Dust investigations in TEXTOR: Impact of dust on plasma–wall interactions and on plasma performance
journal, July 2013

Litnovsky, A.; Rudakov, D. L.; Bozhenkov, S.
Journal of Nuclear Materials, Vol. 438
DOI: 10.1016/j.jnucmat.2013.01.020

Experimental study of PFCs erosion and eroded material deposition under ITER-like transient loads at the plasma gun facility QSPA-T
journal, August 2011

Klimov, N.; Podkovyrov, V.; Zhitlukhin, A.
Journal of Nuclear Materials, Vol. 415, Issue 1
DOI: 10.1016/j.jnucmat.2011.01.013

Divertor materials evaluation system at DIII-D
journal, December 1992

Wong, C. P. C.; Junge, R.; Phelps, R. D.
Journal of Nuclear Materials, Vol. 196-198
DOI: 10.1016/S0022-3115(06)80159-5

Combined ion micro probe and SEM analysis of strongly non uniform deposits in fusion devices
journal, January 2015

Bykov, I.; Bergsåker, H.; Petersson, P.
Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 342
DOI: 10.1016/j.nimb.2014.08.019

Edge localized mode control with an edge resonant magnetic perturbation
journal, May 2005

Moyer, R. A.; Evans, T. E.; Osborne, T. H.
Physics of Plasmas, Vol. 12, Issue 5
DOI: 10.1063/1.1888705

ITER-W monoblocks under high pulse number transient heat loads at high temperature
journal, August 2015

Loewenhoff, Th.; Linke, J.; Pintsuk, G.
Journal of Nuclear Materials, Vol. 463
DOI: 10.1016/j.jnucmat.2014.11.002

Multi-purpose deployer for ITER in-vessel maintenance
journal, October 2015

Choi, Chang-Hwan; Tesini, Alessandro; Subramanian, Rajendran
Fusion Engineering and Design, Vol. 98-99
DOI: 10.1016/j.fusengdes.2015.06.156

Interaction of adhered metallic dust with transient plasma heat loads
journal, May 2016

Ratynskaia, S.; Tolias, P.; Bykov, I.
Nuclear Fusion, Vol. 56, Issue 6
DOI: 10.1088/0029-5515/56/6/066010

Similar Records in DOE PAGES and OSTI.GOV collections:

Modification of adhered dust on plasma-facing surfaces due to exposure to ELMy H-mode plasma in DIII-D

Conference Bykov, I ; Rudakov, D L ; Ratynskaia, S ; ...
https://doi.org/10.1016/j.nme.2017.05.006

Full Text Available
Pedestal magnetic turbulence measurements in ELMy H-mode DIII-D plasmas by Faraday-effect polarimetry

Journal Article Chen, J. ; Brower, D. L. ; Ding, W. X. ; ... - Physics of Plasmas

Internal magnetic fluctuation measurements are utilized to identify turbulence associated with micro-tearing modes (MTM) in the DIII-D ELMy H-mode pedestal. Using a Faraday-effect polarimeter, magnetic turbulence (150-500 kHz) is directly observed with typical line-averaged fluctuation amplitude ~0.8 Gauss at peak frequency (250 kHz) and ~15 Gauss integrated over the spectrum from 150 to 500 kHz. Frequency, poloidal wavenumber and propagation direction of the magnetic turbulence all serve to identify as MTM. Magnetic turbulence amplitude non-monotonically correlates with collision frequency, peaks off mid-plane and correlates with electron temperature gradient evolution between ELMs, consistent with MTM features identified from theory and gyro-kineticmore »« less
https://doi.org/10.1063/5.0039154

Full Text Available
Particle transport in low-collisionality H-mode plasmas on DIII-D

Journal Article Mordijck, Saskia ; Wang, Xin ; Doyle, Edward J. ; ... - Nuclear Fusion

In this article we show that changing from an ion temperature gradient (ITG) to trapped electron mode (TEM) dominant turbulence regime (based on linear gyrokinetic simulations) results experimentally in a strong density pump-out (defined as a reduction in line-averaged density) in low collisionality, low power H-mode plasmas. We vary the turbulence drive by changing the heating from pre-dominantly ion heatedusing neutral beam injection to electron heated using electron cyclotron heating, which changes the T_e/T_i ratio and the temperature gradients. Perturbed gas puff experiments show an increase in transport outside ρ = 0.6, through a strong increase in the perturbed diffusionmore »« less
Cited by 17
https://doi.org/10.1088/0029-5515/55/11/113025

Full Text Available
Reduced electron thermal transport in low collisionality H-mode plasmas in DIII-D and the importance of TEM/ETG-scale turbulence

Journal Article Schmitz, L. ; Holland, C. ; Rhodes, T. L. ; ... - Nuclear Fusion

The first systematic investigation of core electron thermal transport and the role of local ion temperature gradient/trapped electron mode/electron temperature gradient (ITG/TEM/ETG)-scale core turbulence is performed in high temperature, low collisionality H-mode plasmas in the DIII-D tokamak. Wavenumber spectra of L-mode and H-mode density turbulence are measured by Doppler backscattering. H-mode wavenumber spectra are directly contrasted for the first time with nonlinear gyrokinetic simulation results. Core ITG/TEM-scale turbulence is substantially reduced/suppressed by E × B shear promptly after the L–H transition, resulting in reduced electron thermal transport across the entire minor radius. For small kθρs, both experiment and nonlinear gyrokineticmore »« less
https://doi.org/10.1088/0029-5515/52/2/023003
Location of the first plasma response to resonant magnetic perturbations in DIII-D H-mode plasmas

Journal Article Xiao, W. W. ; Evans, T. E. ; Tynan, G. R. ; ... - Nuclear Fusion

The resonant location of the first plasma response to periodic toroidal phase flips of a Resonant Magnetic Perturbation (RMP) field is experimentally identified in the DIII-D tokamak using phase minima of the modulated plasma density and toroidal rotation relative to the RMP field. Furthermore, the plasma response coincides with the q=3 rational surface and electron fluid velocity null, which is consistent with simulations of the plasma response to the RMP field from a resistive Magnetohydrodynamics modeling. We also observe an asymmetric propagation of the particle and the momentum from the resonant location of the plasma response to the RMP intomore » to core and into the plasma edge.« less
Cited by 7
https://doi.org/10.1088/0029-5515/56/6/064001

Full Text Available

Similar Records

Title: Modification of adhered dust on plasma-facing surfaces due to exposure to ELMy H-mode plasma in DIII-D

Citation Formats

Recent sheath physics studies on DIII-D journal, August 2015

A full tungsten divertor for ITER: Physics issues and design status journal, July 2013

Initial operation of the divertor Thomson scattering diagnostic on DIII-D journal, February 1997

Can aluminium or magnesium be a surrogate for beryllium: A critical investigation of their chemistry journal, October 2013

Dust remobilization in fusion plasmas under steady state conditions journal, January 2016

Migration of artificially introduced micron-size carbon dust in the DIII-D divertor journal, June 2007

Dust investigations in TEXTOR: Impact of dust on plasma–wall interactions and on plasma performance journal, July 2013

Experimental study of PFCs erosion and eroded material deposition under ITER-like transient loads at the plasma gun facility QSPA-T journal, August 2011

Divertor materials evaluation system at DIII-D journal, December 1992

Combined ion micro probe and SEM analysis of strongly non uniform deposits in fusion devices journal, January 2015

Edge localized mode control with an edge resonant magnetic perturbation journal, May 2005

ITER-W monoblocks under high pulse number transient heat loads at high temperature journal, August 2015

Multi-purpose deployer for ITER in-vessel maintenance journal, October 2015

Interaction of adhered metallic dust with transient plasma heat loads journal, May 2016

Recent sheath physics studies on DIII-D
journal, August 2015

A full tungsten divertor for ITER: Physics issues and design status
journal, July 2013

Initial operation of the divertor Thomson scattering diagnostic on DIII-D
journal, February 1997

Can aluminium or magnesium be a surrogate for beryllium: A critical investigation of their chemistry
journal, October 2013

Dust remobilization in fusion plasmas under steady state conditions
journal, January 2016

Migration of artificially introduced micron-size carbon dust in the DIII-D divertor
journal, June 2007

Dust investigations in TEXTOR: Impact of dust on plasma–wall interactions and on plasma performance
journal, July 2013

Experimental study of PFCs erosion and eroded material deposition under ITER-like transient loads at the plasma gun facility QSPA-T
journal, August 2011

Divertor materials evaluation system at DIII-D
journal, December 1992

Combined ion micro probe and SEM analysis of strongly non uniform deposits in fusion devices
journal, January 2015

Edge localized mode control with an edge resonant magnetic perturbation
journal, May 2005

ITER-W monoblocks under high pulse number transient heat loads at high temperature
journal, August 2015

Multi-purpose deployer for ITER in-vessel maintenance
journal, October 2015

Interaction of adhered metallic dust with transient plasma heat loads
journal, May 2016