Correlation of spherical nanoindentation stress-strain curves to simple compression stress-strain curves for elastic-plastic isotropic materials using finite element models

Patel, Dipen K.; Kalidindi, Surya R.

doi:10.1016/j.actamat.2016.04.034

Title: Correlation of spherical nanoindentation stress-strain curves to simple compression stress-strain curves for elastic-plastic isotropic materials using finite element models

Full Record
Other Related Research

Authors:

Patel, Dipen K.;

Publication Date:: 2016-06-01

Sponsoring Org.:: USDOE

OSTI Identifier:: 1351008

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Acta Materialia

Additional Journal Information:: Journal Name: Acta Materialia Journal Volume: 112 Journal Issue: C; Journal ID: ISSN 1359-6454

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

Citation Formats


                    Patel, Dipen K., and Kalidindi, Surya R.. Correlation of spherical nanoindentation stress-strain curves to simple compression stress-strain curves for elastic-plastic isotropic materials using finite element models.  United States: N. p., 2016. 
Web.  https://doi.org/10.1016/j.actamat.2016.04.034.

Copy to clipboard


                    Patel, Dipen K., & Kalidindi, Surya R.. Correlation of spherical nanoindentation stress-strain curves to simple compression stress-strain curves for elastic-plastic isotropic materials using finite element models.  United States.  https://doi.org/10.1016/j.actamat.2016.04.034

Copy to clipboard


                    Patel, Dipen K., and Kalidindi, Surya R.. Wed .  
"Correlation of spherical nanoindentation stress-strain curves to simple compression stress-strain curves for elastic-plastic isotropic materials using finite element models".  United States.  https://doi.org/10.1016/j.actamat.2016.04.034.

Copy to clipboard


                    
@article{osti_1351008,

  title        = {Correlation of spherical nanoindentation stress-strain curves to simple compression stress-strain curves for elastic-plastic isotropic materials using finite element models},

  author       = {Patel, Dipen K. and Kalidindi, Surya R.},

  abstractNote = {},

  doi          = {10.1016/j.actamat.2016.04.034},

  journal      = {Acta Materialia},

  number       = C,

  volume       = 112,

  place        = {United States},

  year         = {2016},

  month        = {6}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.actamat.2016.04.034

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 12 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Assessment of stress-strain data suitable for finite-element elastic--plastic analysis of shipping containers

Technical Report Rack, H J ; Knorovsky, G A

Stress-strain data which describes the influence of strain rate and temperature on the mechanical response of materials presently being used for light water reactor fuel shipping containers have been assembled. Selection of data has been limited to that which is suitable for use in finite-element elastic--plastic analysis of shipping containers (e.g., they must include complete material history profiles). Based on this information, recommendations have been made for further work which is required to complete the necessary data base.
https://doi.org/10.2172/6513543

Full Text Available
Spherical nanoindentation stress-strain curves of commercially pure titanium and Ti-6Al-4V

Dataset Weaver, Jordan S. ; Priddy, Matthew W. ; McDowell, David L. ; ...

Spherical nanoindentation combined with electron back-scattered diffraction was employed to characterize the grain-scale elastic and plastic anisotropy of single crystal alpha-Ti for commercially pure (CP-Ti) and alloyed (Ti-64) titanium. In addition, alpha-beta Ti (single colony) grains were characterized. The data set includes the nanoindentation force, displacement, and contact stiffness, the nanoindentation stress-strain analysis, and the alpha-Ti crystal orientations. Details of the samples and experimental protocols can be found in Weaver et al. (2016) Acta Materialia doi:10.1016/j.actamat.2016.06.053.
https://doi.org/10.17021/1279843

View Dataset
Spherical nanoindentation stress–strain curves

Journal Article Pathak, Siddhartha ; Kalidindi, Surya R. - Materials Science and Engineering. R, Reports

Although indentation experiments have long been used to measure the hardness and Young's modulus, the utility of this technique in analyzing the complete elastic–plastic response of materials under contact loading has only been realized in the past few years – mostly due to recent advances in testing equipment and analysis protocols. This paper provides a timely review of the recent progress made in this respect in extracting meaningful indentation stress–strain curves from the raw datasets measured in instrumented spherical nanoindentation experiments. These indentation stress–strain curves have produced highly reliable estimates of the indentation modulus and the indentation yield strength inmore »« less
Cited by 41
https://doi.org/10.1016/j.mser.2015.02.001

Full Text Available
Elastic--plastic stress-strain relations for materials with different yield strengths in tension and compression

Technical Report Hartzman, M
Comparison of stress distributions in a simple tubular joint using 3-D finite element, photoelastic and strain gauge techniques

Conference Fessler, H ; Edwards, C D - Offshore Technol. Conf.; (United States)

Combined strip and rosette gauge measurements and results from three-dimensional, finite element calculations are in excellent agreement with frozen stress photoelastic results for an efficient shape of cast-steel node under axial, brace loading. Three different meshes showed that two layers of elements through the thickness are needed.

Similar Records