Tailoring plasticity of austenitic stainless steels for nuclear applications: Review of mechanisms controlling plasticity of austenitic steels below 400 °C

Meric de Bellefon, G.; van Duysen, J. C.

doi:10.1016/j.jnucmat.2016.04.015

Title: Tailoring plasticity of austenitic stainless steels for nuclear applications: Review of mechanisms controlling plasticity of austenitic steels below 400 °C

Full Record
Other Related Research

Authors:: Meric de Bellefon, G.; van Duysen, J. C.

Publication Date:: Fri Jul 01 00:00:00 EDT 2016

Sponsoring Org.:: USDOE

OSTI Identifier:: 1341169

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Journal of Nuclear Materials

Additional Journal Information:: Journal Name: Journal of Nuclear Materials Journal Volume: 475 Journal Issue: C; Journal ID: ISSN 0022-3115

Publisher:: Elsevier

Country of Publication:: Netherlands

Language:: English

Citation Formats


                    Meric de Bellefon, G., and van Duysen, J. C. Tailoring plasticity of austenitic stainless steels for nuclear applications: Review of mechanisms controlling plasticity of austenitic steels below 400 °C.  Netherlands: N. p., 2016. 
Web.  doi:10.1016/j.jnucmat.2016.04.015.

Copy to clipboard


                    Meric de Bellefon, G., & van Duysen, J. C. Tailoring plasticity of austenitic stainless steels for nuclear applications: Review of mechanisms controlling plasticity of austenitic steels below 400 °C.  Netherlands.  https://doi.org/10.1016/j.jnucmat.2016.04.015

Copy to clipboard


                    Meric de Bellefon, G., and van Duysen, J. C. Fri .  
"Tailoring plasticity of austenitic stainless steels for nuclear applications: Review of mechanisms controlling plasticity of austenitic steels below 400 °C".  Netherlands.  https://doi.org/10.1016/j.jnucmat.2016.04.015.

Copy to clipboard


                    
@article{osti_1341169,

  title        = {Tailoring plasticity of austenitic stainless steels for nuclear applications: Review of mechanisms controlling plasticity of austenitic steels below 400 °C},

  author       = {Meric de Bellefon, G. and van Duysen, J. C.},

  abstractNote = {},

  doi          = {10.1016/j.jnucmat.2016.04.015},

  journal      = {Journal of Nuclear Materials},

  number       = C,

  volume       = 475,

  place        = {Netherlands},

  year         = {Fri Jul 01 00:00:00 EDT 2016},

  month        = {Fri Jul 01 00:00:00 EDT 2016}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.jnucmat.2016.04.015

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 41 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Microstructural evolution of austenitic stainless steels irradiated to 17 dpa in spectrally tailored experiment of the ORR and HFIR at 400{degrees}C

Technical Report Wakai, E. ; Hashimoto, N. ; Gibson, L. T.

The microstructural evolution of austenitic JPCA aged and solution annealed JPCA, 316R, C, K, and HP steels irradiated at 400{degrees}C in spectrally tailored experiments of the ORR and HFIR has been investigated. The helium generation rates were about 12-16 appm He/dpa on the average up to 17.3 dpa. The number densities and average diameters of dislocation loops in the steels have ranges of 3.3 x 10{sup 21} m{sup -3} and 15.2-26.3 nm, respectively, except for HP steel for which they are 1.1 x 10{sup 23} m{sup -3} and 8.0 nm. Precipitates are formed in all steels except for HP steel,more »« less
https://doi.org/10.2172/543212

Full Text Available
Microstructural evolution of NF709 austenitic stainless steel under in-situ ion irradiations at room temperature, 300, 400, 500 and 600 °C

Journal Article Xu, Chi ; Chen, Wei-Ying ; Chen, Yiren ; ... - Journal of Nuclear Materials

Irradiation induced microstructural changes in the NF709 austenitic stainless steel were investigated under 1 MeV Kr ion irradiations to a dose of 3 dpa at room temperature (RT), 300, 400, 500 and 600 °C, and a dose of 20 dpa at RT. The irradiation-induced defects and the stability of precipitates were characterized with transmission electron microscopy (TEM). Frank dislocation loops were observed in all the irradiated samples, and the loop sizes were much larger at 600 °C than those at lower temperatures. “Raft” defect structures, formed through self-alignment of small dislocation loops, were also observed in all irradiated samples. M23C6more »« less
Cited by 14
https://doi.org/10.1016/j.jnucmat.2018.07.044

Full Text Available
Mechanical Properties, Microstructural Evolution, and the Effect of Friction on the Plastic Flow of the AISI 321 Austenitic Stainless Steel Tube During Cold Pilgering: An Experimental and Simulation Analysis

Journal Article Musazadeh, Mohamad Hosein ; Vafaei, Reza ; Mohammad Sharifi, Ehsan, E-mail: ehsan-sharifi-2000@yahoo.com ; ... - Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science

The mechanical properties, microstructural evolution, and the effect of friction on the plastic flow of the AISI 321 austenitic stainless steel (ASS) tube were investigated during the cold pilger process. The elastic–plastic behavior of as-received tube was simulated by the Johnson-cook model. The model parameters were obtained by the compression and tensile tests. The mechanical properties of the material were examined by the tensile and microhardness tests. Based on the ring compression test results, three different situations for friction conditions were considered. The stress and strain states at these conditions were examined for the outer and inner surfaces of themore »« less
https://doi.org/10.1007/S11663-018-1428-Z
Mechanism of the formation of lamellar M{sub 23}C{sub 6} at and near twin boundaries in austenitic stainless steels

Journal Article Sasmal, B - Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science

Precipitation characteristics of M{sub 23}C{sub 6} during aging at 800 C were studied by transmission electron microscopes in two austenitic stainless steels, A (type AISI 316L) and B (type DIN 4981), which had been quenched in water after their solution treatment at high temperatures (1,150 C and 1,275 C, respectively). After precipitation at grain boundaries, M{sub 23}C{sub 6} precipitated at incoherent and coherent boundaries of twins and inside austenite grains. Close to an incoherent twin boundary on either side of the boundary, M{sub 23}C{sub 6} mostly grew as elongated plates, although elsewhere in austenite matrix these grew usually as equiaxedmore »« less
https://doi.org/10.1007/s11661-999-0116-7
Long-term oxidation and chromium evaporation behavior of Al2O3-forming austenitic stainless steel for 900 °C balance-of-plant components applications in solid oxide fuel cells

Journal Article Zhou, Lingfeng ; Li, Wenyuan ; Brady, Michael P. ; ... - International Journal of Hydrogen Energy
https://doi.org/10.1016/j.ijhydene.2023.10.041

Similar Records