skip to main content
DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Mechanical properties of niobium radio-frequency cavities

Abstract

Radio-frequency cavities made of bulk niobium are one of the components used in modern particle accelerators. The mechanical stability is an important aspect of cavity design, which typically relies on finite-element analysis simulations using material properties from tensile tests on sample. This contribution presents the results of strain and resonant frequency measurements as a function of a uniform pressure up to 722 kPa, applied to single-cell niobium cavities with different crystallographic structure, purity and treatments. In addition, burst tests of high-purity multi-cell cavities with different crystallographic structure have been conducted up to the tensile strength of the material. Finite-element analysis of the single-cell cavity geometry is in good agreement with the observed behavior in the elastic regime assuming a Young's modulus value of 88.5 GPa and a Poisson's ratio of 0.4, regardless of crystallographic structure, purity or treatment. However, the measured yield strength and tensile strength depend on crystallographic structure, material purity and treatment. In particular, the results from this study show that the mechanical properties of niobium cavities with large crystals are comparable to those of cavities made of fine-grain niobium.

Authors:
 [1];  [2];  [2];  [2];  [3];  [3];  [3];  [3]
  1. Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)
  2. Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA
  3. Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)
Publication Date:
Research Org.:
Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)
Sponsoring Org.:
USDOE Office of Science (SC)
OSTI Identifier:
1222197
Alternate Identifier(s):
OSTI ID: 1422676
Report Number(s):
JLAB-ACC-15-2015; DOE/OR/23177-3387
Journal ID: ISSN 0921-5093; PII: S0921509315301490
Grant/Contract Number:  
AC05-06OR23177
Resource Type:
Accepted Manuscript
Journal Name:
Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
Additional Journal Information:
Journal Volume: 642; Journal Issue: C; Journal ID: ISSN 0921-5093
Publisher:
Elsevier
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; 43 PARTICLE ACCELERATORS

Citation Formats

Ciovati, Gianluigi, Dhakal, Pashupati, Matalevich, Joseph R., Myneni, Ganapati Rao, Schmidt, A., Iversen, J., Matheisen, A., and Singer, W.. Mechanical properties of niobium radio-frequency cavities. United States: N. p., 2015. Web. doi:10.1016/j.msea.2015.06.095.
Ciovati, Gianluigi, Dhakal, Pashupati, Matalevich, Joseph R., Myneni, Ganapati Rao, Schmidt, A., Iversen, J., Matheisen, A., & Singer, W.. Mechanical properties of niobium radio-frequency cavities. United States. doi:10.1016/j.msea.2015.06.095.
Ciovati, Gianluigi, Dhakal, Pashupati, Matalevich, Joseph R., Myneni, Ganapati Rao, Schmidt, A., Iversen, J., Matheisen, A., and Singer, W.. Thu . "Mechanical properties of niobium radio-frequency cavities". United States. doi:10.1016/j.msea.2015.06.095. https://www.osti.gov/servlets/purl/1222197.
@article{osti_1222197,
title = {Mechanical properties of niobium radio-frequency cavities},
author = {Ciovati, Gianluigi and Dhakal, Pashupati and Matalevich, Joseph R. and Myneni, Ganapati Rao and Schmidt, A. and Iversen, J. and Matheisen, A. and Singer, W.},
abstractNote = {Radio-frequency cavities made of bulk niobium are one of the components used in modern particle accelerators. The mechanical stability is an important aspect of cavity design, which typically relies on finite-element analysis simulations using material properties from tensile tests on sample. This contribution presents the results of strain and resonant frequency measurements as a function of a uniform pressure up to 722 kPa, applied to single-cell niobium cavities with different crystallographic structure, purity and treatments. In addition, burst tests of high-purity multi-cell cavities with different crystallographic structure have been conducted up to the tensile strength of the material. Finite-element analysis of the single-cell cavity geometry is in good agreement with the observed behavior in the elastic regime assuming a Young's modulus value of 88.5 GPa and a Poisson's ratio of 0.4, regardless of crystallographic structure, purity or treatment. However, the measured yield strength and tensile strength depend on crystallographic structure, material purity and treatment. In particular, the results from this study show that the mechanical properties of niobium cavities with large crystals are comparable to those of cavities made of fine-grain niobium.},
doi = {10.1016/j.msea.2015.06.095},
journal = {Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing},
number = C,
volume = 642,
place = {United States},
year = {2015},
month = {7}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 4 works
Citation information provided by
Web of Science

Save / Share: