National Library of Energy BETA

Sample records for woods general counsel

  1. Steven Silbergleid - General Counsel | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Steven Silbergleid - General Counsel A photo of Steve Silbergleid. As General Counsel, Steve Silbergleid provides legal advice and counsel to the lab's director and executive management on the development and administration of policy, compliance with the prime contract, procurement and intellectual property issues, employment issues, and other legal and management concerns. He also serves as corporate Secretary and provides counsel to the Alliance for Sustainable Energy, L.L.C. (Alliance),

  2. Office of the Assistant General Counsel for General Law | Department...

    Energy Saver

    Services Environment and Compliance Office of the Assistant General Counsel for General Law Office of the Assistant General Counsel for General Law The Office of the ...

  3. NA GC - Office of General Counsel | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) GC - Office of General Counsel

  4. Dr. Steven Croley Confirmed as General Counsel

    Energy.gov [DOE]

    Dr. Steven Croley was confirmed by the Senate on Monday, May 12 as the Department of Energy’s General Counsel.

  5. General Counsel Legal Interpretation Regarding Medical Removal...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Benefits Pursuant to 10 CFR Part 850, Chronic Beryllium Disease Prevention Program General Counsel Legal Interpretation Regarding Medical Removal Protection Benefits ...

  6. Daniel Cohen Assistant General Counsel for Legislation and Regulatory...

    Energy Saver

    Daniel Cohen Assistant General Counsel for Legislation and Regulatory Law Office of the General Counsel Department of Energy 1000 Independence Avenue, SW Washington, DC 20585-0121 ...

  7. Daniel Cohen Assistant General Counsel for Legislation and Regulatory...

    Energy Saver

    2, 2014 Daniel Cohen Assistant General Counsel for Legislation and Regulatory Law Office of the General Counsel Department of Energy 1000 Independence Avenue, SW Washington, DC ...

  8. General Counsel Law Student Intern Program | Department of Energy

    Office of Environmental Management (EM)

    Law Student Intern Program General Counsel Law Student Intern Program The Department of Energy's Office of the General Counsel is accepting applications on a rolling basis for its ...

  9. Office of the Assistant General Counsel for International and...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    International and National Security Programs Office of the Assistant General Counsel for International and National Security Programs The Office of the Assistant General Counsel for ...

  10. Office of the Assistant General Counsel for Litigation | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Litigation Office of the Assistant General Counsel for Litigation The Office of the Assistant General Counsel for Litigation manages, justifies, and defends-in conjunction with the ...

  11. DOE's General Counsel Determines Sudan Act Does Not Bar Areva...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOE's General Counsel Determines Sudan Act Does Not Bar Areva Enrichment Services LLC Loan Application DOE's General Counsel Determines Sudan Act Does Not Bar Areva Enrichment ...

  12. DOE General Counsel for Technology Transfer and Intellectual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    General Counsel for Technology Transfer and Intellectual Property DOE General Counsel for ... to intellectual property (including patents, trademarks, copyrights, and technical ...

  13. Office of the General Counsel Perspective - Joseph Lenhard, Assistant...

    Office of Environmental Management (EM)

    Office of the General Counsel Perspective - Joseph Lenhard, Assistant General Counsel for Procurement and Financial Assistance PDF icon Workshop 2015 - LenhardOffice of GC Trends....

  14. Contacts for the Deputy General Counsel for Litigation, Regulation...

    Office of Environmental Management (EM)

    Litigation, Regulation and Enforcement (GC-30) Contacts for the Deputy General Counsel for Litigation, Regulation and Enforcement (GC-30) Anne Harkavy, Deputy General Counsel for ...

  15. To: Daniel Cohen, Assistant General Counsel for Legislation,...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    February 19, 2015 To: Daniel Cohen, Assistant General Counsel for Legislation, Regulation, and Energy Efficiency, DOE From: Amy Shepherd, General Counsel, AHRI Re: Ex Parte ...

  16. NA GC - Office of General Counsel | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Blog Home About Us Our Operations Management and Budget Office of Civil Rights Workforce Statistics NA GC - Office of General Counsel NA GC - Office of General Counsel...

  17. General Counsel's Office Issues Guidance on Inherently Governmental...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    General Counsel's Office Issues Guidance on Inherently Governmental Functions General Counsel's Office Issues Guidance on Inherently Governmental Functions February 4, 2011 -...

  18. 2012 General Counsel's Reminder Letter Regarding NEPA Planning...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    General Counsel's Reminder Letter Regarding NEPA Planning Summaries 2012 General Counsel's Reminder Letter Regarding NEPA Planning Summaries PDF icon 2012 APS Reminder Letter...

  19. General Counsel Undergraduate Intern Program | Department of...

    Office of Environmental Management (EM)

    in energy law and policy. The General Counsel is charged by the Secretary of Energy with the authority to determine the Department's authoritative position on any question of law. ...

  20. Ivan A. Boatner, Vice President & General Counsel

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Ivan A. Boatner, Vice President & General Counsel 7/18/16

  1. Office of the Assistant General Counsel for General Law

    Energy.gov [DOE]

    The Office of the Assistant General Counsel for General Law (GC-56) provides legal support for non-programmatic issues other than those involving procurement and intellectual property.  The office...

  2. Delegation Order No. 00-015.03 to the Deputy General Counsel for

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Environment and Nuclear Programs - DOE Directives, Delegations, and Requirements 15.03, Delegation Order No. 00-015.03 to the Deputy General Counsel for Environment and Nuclear Programs by johnsonmd Functional areas: Legal 00-015_03-GC-Dep GC Envir-Nuclear Prog.pdf -- PDF Document, 65 KB ID: 015.03 Type: Delegation Delegant: Gregory H. Woods, General Counsel Delegate: Deputy General Counsel for Environment and Nuclear Programs Status: Current Effective Date: Aug 15, 2012 Re-delegation

  3. Office of the General Counsel | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Office of the General Counsel Office of the General Counsel The General Counsel is charged by the Secretary of Energy with the authority to determine the Department's authoritative position on any question of law. The Office of the General Counsel provides legal advice, counsel, and support to the Secretary, the Deputy Secretary, and program offices throughout DOE to further the Department's mission of advancing the national, economic, and energy security of the United States through scientific

  4. Matthew Zogby Office of Assistant General Counsel

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1, 2016 Matthew Zogby Office of Assistant General Counsel for Legislation, Regulation, and Energy Efficiency U.S. Department of Energy 1000 Independence Avenue, SW Washington, DC 20585 Re: Regulatory Burden RFI Dear Mr. Zogby: These comments are submitted by the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) in response to the U.S. Department of Energy's (DOE) notice in the May 10, 2016 Federal Register requesting information to assist DOE in reviewing existing regulations

  5. DOE General Counsel for Technology Transfer and Intellectual Property |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy General Counsel for Technology Transfer and Intellectual Property DOE General Counsel for Technology Transfer and Intellectual Property The Office of the Assistant General Counsel for Technology Transfer and Intellectual Property is responsible for providing legal counsel to Departmental elements on all matters relating to intellectual property (including patents, trademarks, copyrights, and technical data) and transfer of those rights from Department laboratories to the

  6. NNSA Office of General Counsel | National Nuclear Security Administrat...

    National Nuclear Security Administration (NNSA)

    Dyke, Deputy General Counsel for General Law ORGANIZATIONAL STRUCTURE (pdf) LEGAL ... All areas of law are involved, including procurement, environmental, fiscal, labor, ...

  7. Office of the Assistant General Counsel for Procurement and Financial

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Assistance | Department of Energy Services » Transactions, Technology and Contractor Human Resources » Office of the Assistant General Counsel for Procurement and Financial Assistance Office of the Assistant General Counsel for Procurement and Financial Assistance The Office of the Assistant General Counsel for Procurement and Financial Assistance provides legal support and advice regarding the Department's massive contractual expenditures and financial assistance policy and activities.

  8. Office of the General Counsel Organization Chart | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    About Us » Office of the General Counsel Organization Chart Office of the General Counsel Organization Chart The following graphic is an organization chart for the Office of the General Counsel. The office is separated into four major departmental groups: Litigation, Regulation and Enforcement (GC-30) Environment and Compliance (GC-50) Transactions, Technology and Contractor Human Resources (GC-60) Energy Policy (GC-70) GCORG 2016 08 names (42.54 KB) More Documents & Publications DOE

  9. Contacts for the Assistant General Counsel for Legislation, Regulation, and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Efficiency | Department of Energy Legislation, Regulation, and Energy Efficiency Contacts for the Assistant General Counsel for Legislation, Regulation, and Energy Efficiency Office of the Assistant General Counsel for Legislation, Regulation & Energy Efficiency (GC-33) Daniel Cohen, Assistant General Counsel for Legislation, Regulation, & Energy Efficiency 202-586-9523 daniel.cohen@hq.doe.gov Catherine Goshe, Attorney-Adviser 202-586-7053 Preeti Chaudhari, Attorney-Adviser

  10. Contacts for the Assistant General Counsel for Procurement and Financial

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Assistance | Department of Energy Procurement and Financial Assistance Contacts for the Assistant General Counsel for Procurement and Financial Assistance Joseph A. Lenhard, Assistant General Counsel for Procurement & Financial Assistance 202-586-0321 joseph.lenhard@hq.doe.gov Source Selection/Bid Protests 202-586-6902 202-586-4546 (fax) Laura L. Hoffman, Deputy Assistant General Counsel 202-586-8836 laura.hoffman@hq.doe.gov Kevin R. Hilferty, Attorney-Adviser 202-586-8260

  11. Office of the Assistant General Counsel for Contractor Human...

    Energy.gov [DOE] (indexed site)

    Labor and Pension Law provides legal support to DOE headquarters and field personnel ... The Assistant General Counsel for Labor and Pension Law has been designated as the ...

  12. DOE General Counsel Nomination Announcement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOE General Counsel Nomination Announcement March 18, 2009 - 12:00am Addthis WASHINGTON, DC - Today, President Barack Obama announced his intent to nominate the following ...

  13. Office of the Assistant General Counsel for Civilian Nuclear Programs

    Energy.gov [DOE]

    The Office of the Assistant General Counsel for Civilian Nuclear Programs (GC-72) provides legal advice and support to the Department on issues involving nuclear materials, including:

  14. Office of the Assistant General Counsel for Environment

    Energy.gov [DOE]

    The Office of the Assistant General Counsel for Environment provides legal review, support, and advice to DOE with regard to environmental protection and compliance with the National Environmental...

  15. Deputy General Counsel Highlights Role of Environmental Justice in NEPA

    Energy.gov [DOE]

    Kedric L. Payne, DOE Deputy General Counsel for Environment and Compliance, described the evolution of environmental justice (EJ) in NEPA practice at the inaugural National Civil Rights Conference...

  16. Scoping Guidance: Memorandum for General Counsels, NEPA Liaisons...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and Participants in Scoping (CEQ, 1981) Scoping Guidance: Memorandum for General Counsels, NEPA Liaisons, and Participants in Scoping (CEQ, 1981) This Council on Environmental ...

  17. Contacts for the Assistant General Counsel for Civilian Nuclear Programs

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (GC-72) | Department of Energy Civilian Nuclear Programs (GC-72) Contacts for the Assistant General Counsel for Civilian Nuclear Programs (GC-72) James (Ben) McRae, Assistant General Counsel for Civilian Nuclear Programs 202-586-4331 ben.mcrae@hq.doe.gov Anita Capoferri, Deputy Assistant General Counsel 202-586-8135 anita.capoferri@hq.doe.gov Martha Crosland, Deputy Assistant General Counsel 202-586-5793 martha.crosland@hq.doe.gov Sophia Angelini, Attorney-Adviser 202-586-0319

  18. Contacts for the Deputy General Counsel for Transactions, Technology...

    Energy.gov [DOE] (indexed site)

    Gena E. Cadieux, Deputy General Counsel for Transactions, Technology, & Contractor Human Resources 202-586-3426 gena.cadieux@hq.doe.gov Lisa N. Brown, Administrative Staff ...

  19. General Counsel Legal Interpretation Regarding Medical Removal Protection

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Benefits Pursuant to 10 CFR Part 850, Chronic Beryllium Disease Prevention Program | Department of Energy Counsel Legal Interpretation Regarding Medical Removal Protection Benefits Pursuant to 10 CFR Part 850, Chronic Beryllium Disease Prevention Program General Counsel Legal Interpretation Regarding Medical Removal Protection Benefits Pursuant to 10 CFR Part 850, Chronic Beryllium Disease Prevention Program The following document is the Office of the General Counsel (GC) interpretation

  20. Contacts for the Assistant General Counsel for Electricity and Fossil

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy | Department of Energy Electricity and Fossil Energy Contacts for the Assistant General Counsel for Electricity and Fossil Energy Office of the Assistant General Counsel for Electricity & Fossil Energy (GC-76) The attorneys in the GC-76 office provide counsel to the Department of Energy Office of Electricity Delivery and Energy Reliability, Office of Energy Policy and Systems Analysis, Office of Fossil Energy, and the Office of Indian Energy Policy and Programs. GC-76 handles the

  1. Daniel Cohen Assistant General Counsel for Legislation and Regulatory Law

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Daniel Cohen Assistant General Counsel for Legislation and Regulatory Law Office of the General Counsel Department of Energy 1000 Independence Avenue, SW Washington, DC 20585-0121 Re: Ex Parte Memorandum Dear Mr. Cohen: On Tuesday, May 4, 2010, Kit Kennedy and Kate Houren of the Natural Resources Defense Council (NRDC) initiated a telephone call with Daniel Cohen and Bryan Miller of the Department of Energy's Office of the General Council. During the call, NRDC advocated for the adoption of the

  2. Contacts for the Assistant General Counsel for International and National

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Security Programs (GC-53) | Department of Energy International and National Security Programs (GC-53) Contacts for the Assistant General Counsel for International and National Security Programs (GC-53) For general inquiries, please email us at GC-53@hq.doe.gov or call 202-586-3417. Thomas Reilly, Assistant General Counsel for International and National Security Programs 202-586-3417 thomas.reilly@hq.doe.gov Jacqueline (Jakki) McKissick, Administrative Assistant 202-586-3371

  3. Contact for the Assistant General Counsel for General Law (GC-56) |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Contact for the Assistant General Counsel for General Law (GC-56) Contact for the Assistant General Counsel for General Law (GC-56) All comments and requests for assistance should be directed to our office phone at 202-586-1522. Susan Beard, Assistant General Counsel for General Law 202-586-1522 susan.beard@hq.doe.gov Christina (Tina) Hymer, Deputy Assistant General Counsel for Standards of Conduct 202-586-1522 christina.hymer@hq.doe.gov William (Will) Grant II, Deputy

  4. Office of the Assistant General Counsel for Enforcement

    Energy.gov [DOE]

    DOE's Office of Enforcement in the Office of the General Counsel leads the Department's efforts to ensure manufacturers deliver products that meet energy and water conservation standards. ...

  5. Office of the Assistant General Counsel for Litigation

    Energy.gov [DOE]

    The Office of the Assistant General Counsel for Litigation manages, justifies, and defends—in conjunction with the U.S. Department of Justice--all litigation in Federal courts involving challenges...

  6. Office of the Assistant General Counsel for Litigation

    Energy.gov [DOE]

    The Office of the Assistant General Counsel for Litigation manages, justifies, and defends—in conjunction with the U.S. Department of Justice--all litigation in Federal courts involving challenges...

  7. Ellen C. Ginsberg VICE PRESIDENT, GENERAL COUNSEL & SECRETARY

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    l F: 202.533.0140 l ecg@nei.org Ellen C. Ginsberg VICE PRESIDENT, GENERAL COUNSEL & ... Independence Avenue, S.W. Washington, D.C. 20585-0121 Subject: Meeting between ...

  8. Office of the Assistant General Counsel for Contractor Human Resources

    Energy.gov [DOE]

    The Office of the Assistant General Counsel for Labor and Pension Law provides legal support to DOE headquarters and field personnel regarding matters arising under DOE contracts pertaining to...

  9. Office of the Assistant General Counsel for Legislation, Regulation and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Efficiency | Department of Energy Legislation, Regulation and Energy Efficiency Office of the Assistant General Counsel for Legislation, Regulation and Energy Efficiency The Office of the Assistant General Counsel for Legislation, Regulation and Energy Efficiency (GC-33) provides legal support and advice on legislative matters throughout the Department. It participates in the development of DOE views on pending legislation, drafts DOE legislative proposals and supporting documents,

  10. Daniel Cohen Assistant General Counsel for Legislation and Regulatory Law

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2, 2014 Daniel Cohen Assistant General Counsel for Legislation and Regulatory Law Office of the General Counsel Department of Energy 1000 Independence Avenue, SW Washington, DC 20585-0121 Re: Ex Parte Communication following meeting between DOE and the National Marine Manufacturers Association At 2 p.m. ET on Wednesday, May 7 2014 the National Marine Manufacturers Association (NMMA) along with representatives from three of its member organizations met with Jeremy Dommu of the Department of

  11. Contacts for the Assistant General Counsel for Contractor Human Resources |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Contractor Human Resources Contacts for the Assistant General Counsel for Contractor Human Resources Jean S. Stucky, Assistant General Counsel for Contractor Human Resources 202-586-7532 jean.stucky@hq.doe.gov Eva M. Auman, Attorney-Adviser 202-287-5630 Grant Programs Legacy/Closure Sites Hanford Moab National Energy Testing Laboratory National Renewable Energy Laboratory Pacific Northwest National Laboratory Waste Isolation Pilot Project (Carlsbad Field Office) Thomas

  12. Contacts for the Deputy General Counsel for Litigation, Regulation and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Enforcement (GC-30) | Department of Energy Litigation, Regulation and Enforcement (GC-30) Contacts for the Deputy General Counsel for Litigation, Regulation and Enforcement (GC-30) Anne Harkavy, Deputy General Counsel for Litigation, Regulation, and Enforcement 202-586-8700 anne.harkavy@hq.doe.gov Margie L. Washington, Administrative Support Specialist 202-586-8700 202-586-3437 (fax) margie.washington@hq.doe.gov

  13. Contacts for the Deputy General Counsel for Transactions, Technology, &

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Contractor Human Resources (GC-60) | Department of Energy Transactions, Technology, & Contractor Human Resources (GC-60) Contacts for the Deputy General Counsel for Transactions, Technology, & Contractor Human Resources (GC-60) Gena E. Cadieux, Deputy General Counsel for Transactions, Technology, & Contractor Human Resources 202-586-3426 gena.cadieux@hq.doe.gov Lisa N. Brown, Administrative Staff 202-586-5246 202-586-0325 (fax)

  14. Office of the Assistant General Counsel for Technology Transfer and Intellectual Property

    Energy.gov [DOE]

    The Office of the Assistant General Counsel for Technology Transfer and Intellectual Property is responsible for providing legal counsel to Departmental elements on all matters relating to...

  15. ELLEN C. GINSBERG Vice President, General Counsel and Secretary

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ELLEN C. GINSBERG Vice President, General Counsel and Secretary 1201 F Street, NW, Suite 1100 Washington, DC 20004 P: 202.739.8140 ecg@nei.org nei.org April 17, 2015 Dr. Steven P. Croley General Counsel U.S. Department of Energy Mailstop GC-1, 1000 Independence Avenue, SW Washington, DC 20585 Subject: Comments of Nuclear Energy Institute, Inc. re Convention on Supplementary Compensation for Nuclear Damage Contingent Cost Allocation Docket Number: DOE-HQ-2014-0021 - RIN 1990-AA39 Dear Dr. Croley:

  16. Contacts for the Assistant General Counsel for Enforcement (GC-32) |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Enforcement (GC-32) Contacts for the Assistant General Counsel for Enforcement (GC-32) Laura Barhydt, Assistant General Counsel for Enforcement 202-287-5772 Laura.Barhydt@hq.doe.gov Steve Goering, Senior Trial Attorney 202-586-5691 Steven.Goering@hq.doe.gov David Case, Trial Attorney 202-287-6998 David.Case@hq.doe.gov Christina Studt, Trial Attorney 202-586-0389 Christina.Studt@hq.doe.gov Smitha Vemuri, Trial Attorney 202-586-3421 Smitha.Vemuri@hq.doe.gov Deborah

  17. DOE General Counsel Issues Arbitration Guidance for Management and Operations Contractors

    Energy.gov [DOE]

    Washington, DC - The Office of the General Counsel, in conjunction with the Office of General Counsel of the NNSA, has reviewed the question of whether Department of Energy contractors can include...

  18. GE to DOE General Counsel; Re:Request for Comment on Large Capacity...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers GE to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers GE urges the...

  19. Letter to Chairman Darrell Issa from Eric Fygi, Deputy General Counsel-- July 24, 2013

    Energy.gov [DOE]

    On July 24, 2013, Energy Department Deputy General Counsel Eric Fygi sent this letter to Chairman Darrell Issa.

  20. Contact For The Deputy General Counsel for Environment & Compliance (GC-50)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Contact For The Deputy General Counsel for Environment & Compliance (GC-50) Contact For The Deputy General Counsel for Environment & Compliance (GC-50) Kedric L. Payne, Deputy General Counsel for Environment & Compliance 202-586-5072 kedric.payne@hq.doe.gov

  1. MEMORANDUM To: DOE Office of General Counsel From: Tony Bacon

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    MEMORANDUM To: DOE Office of General Counsel From: Tony Bacon Date: August 6, 2015 Re: Ex Parte Communication Memo This memo provides a summary of the communications made to the DOE staff regarding proposed rules on ceiling fan test procedures as well as proposed energy efficiency rules for ceiling fan light kits. The communications occurred during a teleconference on July 30, 2015. The meeting attendees included: Lucy Debutts (DOE) Ashley Armstrong (DOE) David Turner (Hunter Fan Company) Tony

  2. MEMORANDUM To: DOE Office of General Counsel From: Tony Bacon

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    To: DOE Office of General Counsel From: Tony Bacon Date: June 15, 2016 Re: Ex Parte Communication Memo This memo provides a summary of the communications made to the DOE staff regarding proposed rules on ceiling fan test procedures. The communications occurred during a teleconference on June 7, 2016. The meeting attendees included: Lucy Debutts (DOE) Ashley Armstrong (DOE) Bill Walker (Hunter Fan Company) Tony Bacon (Hunter Fan Company) Phil Daniels (Degree Controls, the company which supplies

  3. Contacts for the Assistant General Counsel for Technology Transfer and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Procurement | Department of Energy Technology Transfer and Procurement Contacts for the Assistant General Counsel for Technology Transfer and Procurement Subject Matter/Functional Area Lead Backup Technology Transfer John T. Lucas 202-586-2939 Linda Field 202-586-3440 IP Policy John T. Lucas 202-586-2939 Linda Field 202-586-3440 Litigation Administrative Claims Copyrights/Software Nathaniel Sloan 202-586-4792 Marianne Lynch 202-586-3815 Acquisition/Assistance IP Rights International

  4. MEMORANDUM TO: US Department of Energy, Office of General Counsel

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    MEMORANDUM TO: US Department of Energy, Office of General Counsel (Via Email: expartecommunications@hq.doe.gov) FROM: Joseph Andersen, ITI DATE: January 20, 2016 RE: Ex Parte Communication Regarding the DOE Exempt EPS under the EPS Service Parts Act of 2014 NOPR (EERE-2015-BT-CRT-0013-0001), the DOE Battery Charger SNOPR (EERE-2008-BT-STD- 0005-0231), and the DOE Battery Charger Test Procedure NOPR (EERE-2014-BT-TP-0044-0001). On January 14, 2016, the Information Technology Industry Council

  5. DEPARTMENT OF ENERGY OFFICE OF GENERAL COUNSEL INTERPRETATION

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    INTERPRETATION REGARDING THE APPLICATION OF DOE TECHNICAL STANDARD 1027-92, HAZARD CATEGORIZATION AND ACCIDENT ANALYSIS TECHNIQUES FOR COMPLIANCE WITH DOE ORDER 5480.23, NUCLEAR SAFETY ANALYSIS REPORTS, UNDER THE PROVISIONS OF 10 C.F.R. § 830.202(b)(3) In accordance with 10 C.F.R § 820.51, the Department of Energy (DOE) Acting General Counsel is responding to a request to provide an interpretation concerning a DOE Nuclear Safety Requirement: the application of DOE Technical Standard 1027-92,

  6. Office of the Assistant General Counsel for International and National Security Programs

    Energy.gov [DOE]

    The Office of the Assistant General Counsel for International and National Security Programs provides legal advice in support of DOE defense and national security programs, intelligence and counter...

  7. Office of the Assistant General Counsel for Procurement and Financial Assistance

    Energy.gov [DOE]

    The Office of the Assistant General Counsel for Procurement and Financial Assistance provides legal support and advice regarding the Department's massive contractual expenditures and financial...

  8. Office of the Assistant General Counsel for Legislation, Regulation and Energy Efficiency

    Energy.gov [DOE]

    The Office of the Assistant General Counsel for Legislation, Regulation and Energy Efficiency (GC-33) provides legal support and advice on legislative matters throughout the Department. It...

  9. Contacts for the Office of the General Counsel (GC-1) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy the General Counsel (GC-1) Contacts for the Office of the General Counsel (GC-1) Steven P. Croley, General Counsel 202-586-5281 steven.croley@hq.doe.gov Eric J. Fygi, Deputy General Counsel 202-586-5284 eric.fygi@hq.doe.gov Keith Bradley, Senior Legal Advisor 202-586-6940 keith.bradley@hq.doe.gov Stacia M. Cardille, Senior Legal Advisor 202-586-5364 stacia.cardille@hq.doe.gov Alicia T. deForest, Senior Legal Advisor 202-586-9420 alicia.deforest@hq.doe.gov Katharine R. Dickerson

  10. DOE's General Counsel Determines Sudan Act Does Not Bar Areva Enrichment Services LLC Loan Application

    Energy.gov [DOE]

    Washington, DC - The Office of General Counsel was recently asked whether the Sudan Accountability and Divestment Act of 2007 barred the Department from considering a loan guarantee application...

  11. Contacts for the Deputy General Counsel for Energy Policy (GC-70) |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Energy Policy (GC-70) Contacts for the Deputy General Counsel for Energy Policy (GC-70) Samuel T. Walsh, Deputy General Counsel for Energy Policy 202-586-6732 samuel.walsh@hq.doe.gov Bettie Corey, Administrative Support Specialist 202-586-9507 bettie.corey@hq.doe.gov

  12. Office of the Assistant General Counsel for Electricity and Fossil Energy

    Energy.gov [DOE]

    The Office of the Assistant General Counsel for Electricity and Fossil Energy (GC-76) provides legal support and advice, and policy guidance, to the Department on electricity, fossil energy, energy...

  13. Electrolux to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers

    Energy.gov [DOE]

    Letter from Electrolux to Department of Energy General Counsel; Re:Request for Comment on Large Capacity Clothes Washers Electrolux sumitted comments on re-testing, re-certification, and re-rating...

  14. By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    August 1, 2011 By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency U.S. Department of Energy Office of the General Counsel 1000 Independence Ave., SW Room 6A245 Washington, D.C. 20585 Regulatory.Review@hq.doe.gov Re: EO 13563 Preliminary Plan Dear Mr. Cohen: The Association of Home Appliance Manufacturers (AHAM) respectfully submits the following comments to the Department of Energy (DOE) on preliminary plan for retrospective analysis of existing

  15. By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    June 19, 2012 By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency U.S. Department of Energy Office of the General Counsel 1000 Independence Ave., SW Washington, D.C. 20585 Regulatory.Review@hq.doe.gov Re: Regulatory Burden RFI Dear Mr. Cohen: The Association of Home Appliance Manufacturers (AHAM) respectfully submits the following comments to the Department of Energy (DOE) on its Regulatory Burden RFI, 77 Fed. Reg. 28518 (May 15, 2012). AHAM

  16. By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    21, 2011 By E-Mail Daniel Cohen Assistant General Counsel for Legislation, Regulation, and Energy Efficiency U.S. Department of Energy Office of the General Counsel 1000 Independence Ave., SW Room 6A245 Washington, D.C. 20585 Regulatory.Review@hq.doe.gov Re: Regulatory Burden RFI Dear Mr. Cohen: The Association of Home Appliance Manufacturers (AHAM) respectfully submits the following comments to the Department of Energy (DOE) on its Request for Information on reducing regulatory burden, 76 Fed.

  17. LG to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Washers | Department of Energy LG to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers LG to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers LG response to DOE's request for information regarding alternative test procedures for large-capacity clothes washer models, December 7, 2010. After DOE requested the views of interested parties concerning implementation of an alternative test procedure for large-capacity clothes washer models,

  18. Office of the Assistant General Counsel for Legislation, Regulation...

    Energy.gov [DOE] (indexed site)

    Guidance Federal Register Document Drafting Handbook Attorney General's Report on the APA (1941) Attorney General's Report on the APA (1947) Energy Policy Looking for.. Find,...

  19. Action Center for the Office of the General Counsel | Department...

    Energy.gov [DOE] (indexed site)

    please follow the links below. Report an Appliance Regulation Violation Report Fraud to the Inspector General Submit a Buy American Complaint Submit a Legal Question About...

  20. Contacts for the Assistant General Counsel for Litigation (GC...

    Energy Saver

    Stephen (Steve) Dove, General Attorney 202-586-0905 steve.dove@hq.doe.gov Kate Bushman Smith, Trial Attorney 202-586-3856 kate.bushman@hq.doe.gov Monekia Franklin, Trial Attorney ...

  1. To: Ashley Armstrong, U.S. Department of Energy From: Amy Shepherd, General Counsel, AHRI

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    October 19, 2015 To: Ashley Armstrong, U.S. Department of Energy From: Amy Shepherd, General Counsel, AHRI Re: Ex Parte Communication on Central Air-Conditioner Test Procedure - ICM Issues On October 8, 2015, AHRI staff and Independent Coil Manufacturer (ICM) Representatives met with a representative from the Department of Energy (DOE) to discuss proposed amended test procedures for central air conditioners and how they would impact ICM manufacturers. The meeting was held at AHRI offices in

  2. To: John Cymbalsky, United States Department of Energy From: Amy Shepherd, General Counsel, AHRI

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    25, 2015 To: John Cymbalsky, United States Department of Energy From: Amy Shepherd, General Counsel, AHRI Re: Ex Parte Communication on Commercial Unitary Equipment Rulemaking On February 5, 2015, AHRI staff, Industry Representatives and Energy Efficiency Advocates met to discuss Department of Energy (DOE) rulemakings for commercial furnaces and unitary large equipment. The meeting was held at AHRI offices in Arlington, Virginia. A list of attendees is provided below. At the meeting, the group

  3. To: Laura Barhydt, U.S. Department of Energy From: Amy Shepherd, General Counsel, AHRI

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    December 21, 2015 To: Laura Barhydt, U.S. Department of Energy From: Amy Shepherd, General Counsel, AHRI Re: Ex Parte Communication on Department of Energy Guidance for Dry Charged R- 22 Air Conditioning Units and Proposed Test Procedure Language on Units With No Match On December 1, 2015, AHRI staff and representatives of stakeholders who manufacture central air conditioning and heat pump systems met with representatives from the Department of Energy (DOE) to seek clarification and guidance on

  4. Steven P. Croley, Esq. Office of General Counsel U.S. Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    8, 2014 Steven P. Croley, Esq. Office of General Counsel U.S. Department of Energy 1000 Independence Avenue, SW Washington, DC 20585 Re: Regulatory Burden RFI Dear Mr. Croley: These comments are submitted by the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) in response to the U.S. Department of Energy's (DOE) notice in the July 3, 2014 Federal Register requesting information to assist DOE in reviewing existing regulations and in making its regulatory program more effective and

  5. M E M O R A N D U M To: DOE Office of General Counsel From: William...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Present for APGA were Dave Schryver and Dan Lapato and its General Counsel, William T. Miller of McCarter & English, LLP. Present for DOE were John Cymbalski and Dan Cohen. The ...

  6. Alliance Laundry Systems to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers

    Energy.gov [DOE]

    Letter from Alliance Laundry Systems, LLC to DOE General Counsel, Re: Your (DOE's) request of 11-30-2010 Regarding Clothes Washer Test Procedure Waivers. ALS believes that grandfathering all units...

  7. CRANE CO. 757 THIRD AVENUE NEW YORK. N.Y. THOMAS UNGERLAND ASSOCIATE GENERAL COUNSEL

    Office of Legacy Management (LM)

    ? z _ - c 0-e . CRANE CO. 757 THIRD AVENUE NEW YORK. N.Y. THOMAS UNGERLAND ASSOCIATE GENERAL COUNSEL December 14, 1987 James J. Fiore Director Office of Nuclear Energy Department of Energy Washington, D.C. Re: Crane - Indian Orchard Dear M r. Fiore: W e acknowledge receipt of your letter to Paul Hundt, dated September 29, 1987, which requests certain information about Crane's plant site in Indian Orchard, Massachusetts. The plant is not currently operating. Crane was unable to locate any records

  8. DEPARTMENT OF ENERGY OFFICE OF GENERAL COUNSEL INTERPRETATION REGARDING EXEMPTION RELIEF PURSUANT TO

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    INTERPRETATION REGARDING EXEMPTION RELIEF PURSUANT TO 10 C.F.R. PART 820, PROCEDURAL RULES FOR DOE NUCLEAR ACTIVITIES, SUBPART E, EXEMPTION RELIEF, AND NON-COMPLIANT "DOCUMENTED SAFETY ANALYSES" SUBJECT TO 10 C.F.R. PART 830, NUCLEAR SAFETY MANAGEMENT, SUBPART B, SAFETY BASIS REQUIREMENTS Subpart D to 10 C.F.R Part 820 provides that the Department of Energy's (DOE) General Counsel (GC) shall be responsible for interpreting the DOE Nuclear Safety Requirements. Pursuant to that

  9. Steven P. Croley, Esq. Office of General Counsel U.S. Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    P. Croley, Esq. Office of General Counsel U.S. Department of Energy Re: Regulatory Burden RFI Dear Mr. Croley: These comments are submitted by Zero Zone Inc., a manufacturer of CRE equipment, in response to the U.S. Department of Energy's (DOE) notice in the July 3, 2014 Federal Register requesting information to assist DOE in reviewing existing regulations and in making its regulatory program more effective and less burdensome. I apologize for the comments being late by 2 days. We have some

  10. Memorandum To: GENERAL COUNSEL, DEPARTMENT OF ENERGY (DOE) From: JONATHAN MELCHI, HEATING, AIR-CONDITIONING AND REFRIGERATION

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    GENERAL COUNSEL, DEPARTMENT OF ENERGY (DOE) From: JONATHAN MELCHI, HEATING, AIR-CONDITIONING AND REFRIGERATION DISTRIBUTORS INTERNATIONAL (HARDI) Date: 1/12/2012 Subject: EX PARTE COMMUNICATION MEMO DOE ATTENDEES: Ashley Armstrong, John Cymbalsky, David Case, Laura Barhydt HARDI ATTENDEES: Talbot Gee, Jonathan Melchi AREAS OF DISCUSSION: DOE Framework Document and Stakeholder Meeting regarding the Enforcement of the updated Energy Conservation Standards for Air Conditioners, Furnaces and Heat

  11. TO: DOE Office of General Counsel, FROM: Robin Roy, Natural Resources Defense Council, rroy@nrdc.org

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    TO: DOE Office of General Counsel, FROM: Robin Roy, Natural Resources Defense Council, rroy@nrdc.org DATE: February 26, 2013 RE: Disclosure of Permitted Communication Concerning Fossil Fuel Energy Consumption Reduction for New Construction and Major Renovations of Federal Buildings -- Docket No. EERE-2010-BT-STD-0031; RIN 1904-AB96 This memo provides an overview of communications made to DOE staff on the subject of the rulemaking referenced above. The communications occurred at a meeting held on

  12. Cord Wood Testing in a Non-Catalytic Wood Stove

    SciTech Connect

    Butcher, T.; Trojanowski, R.; Wei, G.

    2014-06-30

    EPA Method 28 and the current wood stove regulations have been in-place since 1988. Recently, EPA proposed an update to the existing NSPS for wood stove regulations which includes a plan to transition from the current crib wood fuel to cord wood fuel for certification testing. Cord wood is seen as generally more representative of field conditions while the crib wood is seen as more repeatable. In any change of certification test fuel, there are questions about the impact on measured results and the correlation between tests with the two different fuels. The purpose of the work reported here is to provide data on the performance of a noncatalytic stove with cord wood. The stove selected has previously been certified with crib wood which provides a basis for comparison with cord wood. Overall, particulate emissions were found to be considerably higher with cord wood.

  13. General Engineer

    Energy.gov [DOE]

    This position is located in Office of Standard Contract Management, within the Office of the General Counsel (GC). The purpose of the position is to conduct technical and engineering reviews of the...

  14. Wood Storks of the Birdsville Colony and swamps of the Savannah River Site: General overview of research findings, 1983--1990

    SciTech Connect

    Coulter, M.C.

    1993-02-01

    The population of Wood Storks (Mycteria americana) that breeds in the United States has decreased from an estimated 20,000 breeding pairs in 1930 to just under 5,000 pairs in 1980. Since 1980, the number has remained relatively stable, fluctuating between 3,500 and 5,500 breeding pairs. The decline prompted the US Fish and Wildlife Service (USFWS) to list the United States population of Wood Storks as endangered in 1984. When the US Department of Energy (USDOE) decided to restart L-Reactor on the Savannah River Site (SRS), there was concern that when the reactor was restarted, cooling water flowing into the Steel Creek Delta would raise the water level and the area would become too deep for foraging storks. The potential loss of this area to storks was important because storks had been observed foraging in the Steel Creek Delta. The USDOE began consultation with the USFWS in April, 1984, and the USDOE subsequently agreed to develop and maintain alternative foraging habitat to replace the potential loss. In order to design and manage the alternate foraging ponds as effectively as possible, it was necessary to understand aspects of the biology of the storks, the characteristics of their foraging sites and the patterns of their use of the SRSS. Results are described.

  15. Berkeley Lab Counsel

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Counsel supports the operational and scientific mission needs of the Lawrence Berkeley National Laboratory by providing proactive, timely, thoughtful and practical advice...

  16. Wood pellet production

    SciTech Connect

    Moore, J.W.

    1983-08-01

    Southern Energy Limited's wood pellet refinery, Bristol, Florida, produces wood pellets for fuel from scrap wood from a nearby sawmill and other hog fuel delivered to the plant from nearby forest lands. The refinery will provide 50,000 tons of pellets per year to the Florida State Hospital at Chattahoochee to fire recently converted boilers in the central power plant. The pellets are densified wood, having a moisture content of about 10% and a heating value of 8000 Btu/lb. They are 0.5 inches in diameter and 2 to 3 inches in length.

  17. Wood energy system design

    SciTech Connect

    Not Available

    1988-01-01

    This handbook, Wood Energy System Design, was prepared with the support of the Council of Great Lakes Governors and the US Department of Energy. It contains: wood fuel properties; procurement; receiving, handling, and storage; combustion; gasification; emission control; electric power generation and cogeneration; and case studies. (JF)

  18. STEO October 2012 - wood

    Energy Information Administration (EIA) (indexed site)

    More U.S. households burning wood this winter to stay warm, reversing two-decade decline Burning wood as the primary heating source in U.S. households has risen over the last 10 years, reversing the decline seen in the 1980s and 1990s. About 2.6 million households out of 115 million will rely on wood as the main way to warm their homes this winter. That's up 3 percent from last year, according to the U.S. Energy Information Administration's new winter fuels forecast. The West will have the most

  19. Generating power with waste wood

    SciTech Connect

    Atkins, R.S.

    1995-02-01

    Among the biomass renewables, waste wood has great potential with environmental and economic benefits highlighting its resume. The topics of this article include alternate waste wood fuel streams; combustion benefits; waste wood comparisons; waste wood ash; pilot scale tests; full-scale test data; permitting difficulties; and future needs.

  20. James F. Wood

    Energy.gov [DOE]

    James F. Wood is currently Deputy Assistant Secretary for Clean Coal in the Office of Fossil Energy (FE). In this position, he is responsible for the management and direction of the Office's...

  1. Transportation fuels from wood

    SciTech Connect

    Baker, E.G.; Elliott, D.C.; Stevens, D.J.

    1980-01-01

    The various methods of producing transportation fuels from wood are evaluated in this paper. These methods include direct liquefaction schemes such as hydrolysis/fermentation, pyrolysis, and thermochemical liquefaction. Indirect liquefaction techniques involve gasification followed by liquid fuels synthesis such as methanol synthesis or the Fischer-Tropsch synthesis. The cost of transportation fuels produced by the various methods are compared. In addition, three ongoing programs at Pacific Northwest Laboratory dealing with liquid fuels from wood are described.

  2. Fermilab Office of General Counsel - Karen Bormann

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Karen Bormann Legal Office Administrator Phone: (630) 840-2808 Email: kbormann@fnal.gov Karen Bormann Karen Bormann is the FRA Legal Office Administrator at Fermilab. In this position, Karen manages all operational aspects of the delivery of legal services. She gives technical advice and assistance in all areas of legal administration. She began working at Fermilab in the Business Services Section in 2001. Since taking her appointment with the Legal Office, Karen has and continues to serve as

  3. Fermilab Office of General Counsel - Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Links Documents

  4. Fermilab Office of General Counsel - John Myer

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    at Ingersoll Rand, plc, a 12 billion, publicly-traded manufacturing and energy services business. Previously Myer was in private practice at two international law firms, where...

  5. Fermilab Office of General Counsel - Homepage

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    the Laboratory's interests in such areas as procurement, environmental compliance, intellectual property, labor and personnel matters, use of the Laboratory site, and claims...

  6. General Counsel Law Library | Department of Energy

    Energy.gov [DOE] (indexed site)

    IS UNDER CONSTRUCTION... Contact us with any questions: Law Librarian (202) 586-4849 Law.Library@hq.doe.gov Legislative History Librarian 202-586-2886 Careers & Internships Sign Up...

  7. Fermilab Office of General Counsel - Contact Us

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Office Administrator Karen Bormann Administrative Support Georgianna Amundson Telephone Number (630) 840-3572 Facsimile Number (630) 840-8390 Department Office Wilson Hall, 4 West

  8. Fermilab Office of General Counsel - Links

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Illinois Bar Association Wisconsin Bar Association Fermilab Procurement Forms Illinois Courts Federal Courts DOE-CH M&O Contracts Office of Partnerships and Technology Transfer...

  9. Fermilab Office of General Counsel - Ethics Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Ask the Ethicist Questions & Answers Submit a Question Annual Reminders Reporting Fraud Holiday Parties FRA CODE OF BUSINESS ETHICS AND CONDUCT PROGRAM Fermi Research...

  10. Fermilab Office of General Counsel - About Us

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    the University of Michigan Law School and his B.A. from Oberlin College. View Full Biography Karen Bormann Karen Bormann, Legal Office Administrator Karen Bormann is the FRA...

  11. URBAN WOOD/COAL CO-FIRING IN THE NIOSH BOILER PLANT

    SciTech Connect

    James T. Cobb Jr.

    2005-02-10

    gasification project at its site. Throughout much of this total project the Principal Investigator has counseled two small businesses in developing a waxed cardboard pellet business. A recent test burn of this biofuel appears successful and a purchase contract is anticipated soon. During the past two months a major tree-trimming firm has shown an active interest in entering the wood-chip fuel market in the Pittsburgh area and has contacted the NBP, among others, as potential customers. The NBP superintendent is currently in discussion with the facilities management of the Bruceton Research Center about resuming their interest in cofiring this renewable fuel to the stoker there.

  12. Precision wood particle feedstocks

    DOEpatents

    Dooley, James H; Lanning, David N

    2013-07-30

    Wood particles having fibers aligned in a grain, wherein: the wood particles are characterized by a length dimension (L) aligned substantially parallel to the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L; the L.times.H dimensions define two side surfaces characterized by substantially intact longitudinally arrayed fibers; the W.times.H dimensions define two cross-grain end surfaces characterized individually as aligned either normal to the grain or oblique to the grain; the L.times.W dimensions define two substantially parallel top and bottom surfaces; and, a majority of the W.times.H surfaces in the mixture of wood particles have end checking.

  13. Deputy General Counsel for General Law and Litigation

    Energy.gov [DOE]

    The National Nuclear Security Administration (NNSA) is a semi-autonomous agency of the Department of Energy (DOE). We manage highly visible U.S National Security Programs, enhance U.S. national...

  14. Feasibility for Wood Heat - Collaborative Integrated Wood Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    for Wood Heat * Non-Profit Consortium of Ten Tribal ... Forestry, Fire Management, Self- Governance, ... coordination's across organizations 2 boilers and one ...

  15. Daniel Wood | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Daniel Wood About Us Daniel Wood - Data Visualization and Cartographic Specialist, Office of Public Affairs Daniel Wood Daniel Wood is the Data Visualization and Cartographic Specialist in the Office of Public Affairs at the Department of Energy. He develops creative and interactive ways of viewing the Energy Department's vast array of data. You can check out some of his work here. Prior to joining the Energy.gov team, Daniel worked at a large PR firm in Washington, D.C, doing web development

  16. Wood3 Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Wood3 Resources Jump to: navigation, search Name: Wood3 Resources Place: Houston, Texas Zip: 77056-2409 Product: Wood3 Resources is an energy project development firm run by former...

  17. Would Counseling/Treatment Cost Me My Security Clearance?

    Energy.gov [DOE]

    Everyone tangles, from time to time, with stress- or depression-causing influences, such as grief or divorce. Usually people can cope with such feelings and recapture a general sense of well-being. At other times, someone may want to seek expert advice and counseling when a problem becomes particularly troubling or long-lasting. In such instances, counseling is a good course of action to take. In fact, delaying or failing to seek assistance may cause feelings of despair or stress to get worse.

  18. Fort Yukon Wood Energy Program: Wood Boiler Deployment

    Energy.gov [DOE] (indexed site)

    Oil cost per year for school 210,000 Fuel cost for electrical generation 1.4 M Cord Wood 275 - 300 per cord Kwh 0.77 (rate increase coming) Propane 203.89 per 100 ...

  19. Fort Yukon Wood Energy Program: Wood Boiler Deployment

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fort Yukon Wood Energy Program: Wood Boiler Deployment Department of Energy Tribal Program Review Golden, Colorado March 26, 2014 Presented by: Kelda Britton CATG Department of Natural Resources Please contact me for a full list of citations. kelda@catg.org CATG is a consortium of 10 Gwich'in and Koyukon Athabascan tribes located throughout the Yukon Flats. Arctic Village, Beaver, Birch Creek, Canyon Village, Chalkyitsik, Circle, Fort Yukon, Rampart, Stevens Village and Venetie are the remote

  20. Opinion of Counsel Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Opinion of Counsel Form Opinion of Counsel Form For use with natural gas authorization filings Opinion of Counsel Form - Natural Gas Regulation (7.1 KB) More Documents & Publications Listing of DOE/FE Authorizations Issued in 2013 Listing of DOE/FE Authorizations Issued in 2014 Clean Energy - FE Dkt No. 14-54-LNG (FTA)

  1. Stanford - Woods Institute for the Environment | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Stanford - Woods Institute for the Environment Jump to: navigation, search Logo: Stanford- Woods Institute for the Environment Name: Stanford- Woods Institute for the Environment...

  2. Council of Athabascan Tribal Governments - Wood Energy Program...

    Office of Environmental Management (EM)

    - Diesel Biomass - Wood diesel hybrid power plant CHP - still dreaming for 200-700 Kwh technology Wood Harvest Company * Harvests wood from GZ lands summer and winter - start ...

  3. Cofiring Wood and Coal to Stoker Boilers in Pittsburgh

    SciTech Connect

    Cobb, J.T., Jr.; Elder, W.W.

    1997-07-01

    The prime objective of the University of Pittsburgh's overall wood/coal cofiring program is the successful introduction of commercial cofiring of urban wood wastes into the stoker boilers of western Pennsylvania. Central to this objective is the demonstration test at the Pittsburgh Brewing Company. In this test the project team is working to show that two commercially-available clean wood wastes - tub-ground pallet waste and chipped clearance wood - can be included in the fuel fed daily to an industrial stoker boiler. Irrespective of its economic outcome, the technical success of the demonstration at the brewery will allow the local air quality regulation agency to permit a parametric test at the Bellefield Boiler Plant. The objective of this test is to obtain comprehensive data on all key parameters of this operational boiler while firing wood with coal. The data would then be used for thorough generic technical and economic analyses. The technical analysis would be added to the open literature for the general planning and operational guidance for boiler owners and operators. The economic analysis would gage the potential for providing this stoker fuel commercially in an urban setting and for purchasing it regularly for combustion in an urban stoker boiler.

  4. EEO PRECOMPLAINT COUNSELING INTAKE FORM

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EEO PRE-COUNSELING INTAKE PART I. COMPLAINANT CONTACT INFORMATION: 1. NAME: 2. PREFERRED MAILING ADDRESS: 3. HOME PHONE: WORK PHONE: 4. PREFERRED EMAIL: If you are a current DOE employee, please complete the following: 5. DOE OFFICE: 6. OFFICE ADDRESS: 7. JOB TITLE, SERIES, GRADE: PART 2. DISCRIMINATION INFORMATION: Prohibited discrimination includes actions taken based upon your race, sex, color, religion, age (40 and over), national origin, physical and/or mental disability, genetic

  5. Redelegation Order No. 00-015.01-02 to the Assistant General...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    -- PDF Document, 39 KB ID: 015.01-02 Type: Re-delegation Delegant: Timothy G. Lynch, Deputy General Counsel for Litigation and Enforcement Delegate: Assistant General...

  6. Redelegation Order No. 00-015.01-01 to the Assistant General...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    -- PDF Document, 37 KB ID: 015.01-01 Type: Re-delegation Delegant: Timothy G. Lynch, Deputy General Counsel for Litigation and Enforcement Delegate: Assistant General...

  7. Wood and Pellet Heating Basics | Department of Energy

    Energy Saver

    Wood-burning and pellet fuel appliances use biomass or waste resources to heat homes or ... Modern, centralized wood heaters use wood gasification technology that burns both the wood ...

  8. Marcia A. Wood | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Marcia A. Wood Group Leader, Information Solutions and Technology Assurance B.S. Computer Science, University of St. Francis Telephone 630.252.4656 Fax 630.252.6866 E-mail wood@anl.gov

  9. Wood To Fuel LLC | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    To Fuel LLC Jump to: navigation, search Name: Wood To Fuel LLC Place: Lackawana, New York Zip: 14208 Product: Wood fuelproduct supplier. Coordinates: 41.401932, -75.637848...

  10. Processes change the look of wood fuel

    SciTech Connect

    Zerbe, J.I.

    1980-06-01

    The various forms of wood-derived fuels are reviewed, these include briquetted and pelleted wood products. Charcoal, obtained by pyrolysis has a heating value one and a half times the equivalent weight of the dry wood from which it was made. By process modifications, more oil and gas may be produced instead of charcoal. At Albany, Oregon two barrels of oil are produced daily by hydrogenation of one ton of dry wood chips. It is stated that methanol can be synthesized from solid wood - by wood gasification - with a 38% energy efficiency while ethanol can also be made from wood. The use of wood fuels for electric power generation and cogeneration are also mentioned.

  11. Processes change the look of wood fuel

    SciTech Connect

    Zerbe, J.I.

    1980-06-01

    The various forms of wood-derived fuels are reviewed; these include briquetted and pelleted wood products. Charcoal, obtained by pyrolysis has a heating value one and a half times the equivalent weight of the dry wood from which it was made. By process modifications, more oil and gas may be produced instead of charcoal. At Albany, Oregon two barrels of oil are produced daily by hydrogenation of one ton of dry wood chips. It is stated that methanol can be synthesized from solid wood - by wood gasification - with a 38% energy efficiency while ethanol can also be made from wood. The use of wood fuels for electric power generation and cogeneration are also mentioned.

  12. Wanda Woods | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Wanda Woods Budget & Resource Administrator Wanda Woods Argonne National Laboratory 9700 South Cass Avenue Building 240 - Wkstn. 1C9 Argonne, IL 60439 630-252-1353 wwoods@alcf.anl.gov

  13. Duffield Wood Pellets | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Duffield Wood Pellets Jump to: navigation, search Name: Duffield Wood Pellets Place: North Yorkshire, United Kingdom Zip: HG4 5JB Product: A Yorkshire-based, family-run producer of...

  14. Kenneth L. Wood | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Kenneth L. Wood Senior Engineering Specialist Telephone (630) 252-3971 E-mail klw@hep.anl

  15. Engineering methods for the design and employment of wood cribs

    SciTech Connect

    Barczak, T.M. ); Gearhart, D.F. )

    1993-01-01

    Wood cribs are used extensively by the mining industry to stabilize mine openings. While the cost per crib is relatively low, their extensive use can result in annual mine costs of over $1 million. In an effort to improve the utilization of these supports and to reduce ground control hazards, the US Bureau of Mines has developed engineering methods to assist mine operators in wood-crib design and employment. Design and employment criteria are established based on the strength, stiffness, and stability of the crib structure in relation to the load conditions imposed by the mine environment. Models have been developed based on full-scale tests in the USBM's Mine Roof Simulator that compute the capacity of wood cribs of various configurations and material constructions as a function of displacement of the crib structure due to roof-and-floor convergence. These models permit the comparison of the loading characteristics and cost of employment of different crib designs, and in conjunction with roof behavior models, provide a means to determine the optimum design and employment strategy. In eastern coal mines, wood cribs generally are constructed from hardwood timbers, while softwood timbers generally are used in western coal mines. 11 refs., 27 figs., 2 tabs.

  16. Wood and Pellet Heating | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Heat & Cool » Home Heating Systems » Wood and Pellet Heating Wood and Pellet Heating A wood stove on a stone hearth. | Photo courtesy of ©iStockphoto/King_Louie A wood stove on a stone hearth. | Photo courtesy of ©iStockphoto/King_Louie Today you can choose from a new generation of wood- and pellet-burning appliances that are cleaner burning, more efficient, and powerful enough to heat many average-sized, modern homes. Pellet fuel appliances burn small pellets that measure 3/8 to 1

  17. Fort Yukon Wood Energy Program: Wood Boiler Deployment

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    By: Karonhiakta'tie Bryan Maracle and Bill Wall - Council of Athabascan Tribal Governments (CATG) - Consortia of 10 Tribal Governments of Interior Alaska - Gwitchyaa Zhee Corporation (GZ Corp) - Alaska Native Claims Settlement Act Village Corporation - Alaska Village Initiatives (AVI) - Rural Alaska economic development organization - First off grid, off road system biomass CHP in the world - 8 miles north of the Arctic Circle - New Power House - Wood Chip Boiler - District Heating loop

  18. Densified fuels from wood waste

    SciTech Connect

    Pickering, W.H.

    1995-11-01

    Wood compressed to a specific gravity of about 1.2 constitutes an excellent clean burning fuel. {open_quotes}Prestologs{close_quotes} were marketed before 1940, but in the past ten years a much larger and growing market is densified pellet fuel has developed. The market for pellet fuel is about 90% residential, using special pellet burning stoves. Initial sales were almost entirely in the northwest, but sales in other parts of the country are now growing rapidly. Approximately 300,000 stoves are in use. Note that this industry developed from the private sector with little or no support from federal or state governments. Densified fuel is manufactured by drying and compressing sawdust feedstock. Combustion is different than that of normal wood. For example, wood pellets require ample supplies of air. They then burn with a hot flame and very low particulate emissions. Volatile organic compounds are burned almost completely and carbon monoxide can also be kept very low. Stoves burning pellets easily meet EPA standards. This paper discusses technical and economic factors associated with densified fuel and considers the future of the industry.

  19. Table N5.2. Selected Wood and Wood-Related Products in Fuel...

    Energy Information Administration (EIA) (indexed site)

    ... for any table cell, multiply the cell's" "corresponding RSE column and RSE row factors. ... "Table N5.2. Selected Wood and Wood-Related Products in Fuel Consumption, 1998;" " Level: ...

  20. Arbuthnott Wood Pellets Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Scotland, United Kingdom Zip: AB30 1PA Product: Wood pellet producer. Coordinates: 56.932781, -2.42531 Show Map Loading map... "minzoom":false,"mappingservice":"googlema...

  1. Grant F. Wood | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Grant F. Wood Consultant - Project Management 9700 S. Cass Avenue Building 240 Wkstn. 3D18 Argonne, IL 60439 630-252-5315 gfwood

  2. Qualifying Wood Stove Deduction | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Total cost, exclusive of taxes, interest and other finance charges Summary This incentive allows Arizona taxpayers to deduct the cost of converting an existing wood fireplace to a ...

  3. Wood, Wisconsin: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Wood, Wisconsin: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 43.568752, -90.330887 Show Map Loading map... "minzoom":false,"mappingservice"...

  4. Assistant General Counsel for Technology Transfer and Intellectual Property

    Energy Saver

    5, 1997: Yucca Mountain exploratory drilling April 25, 1997: Yucca Mountain exploratory drilling April 25, 1997: Yucca Mountain exploratory drilling April 25, 1997 Workers complete drilling of the five-mile long, horseshoe-shaped exploratory tunnel through Yucca Mountain at the proposed high-level nuclear waste repository in Nevada

    6, 1986: Chernobyl April 26, 1986: Chernobyl April 26, 1986: Chernobyl April 26, 1986 A major nuclear accident occurs at Chernobyl Reactor #4 near Pripyat, Ukraine

  5. DEPARTMENT OF ENERGY OFFICE OF GENERAL COUNSEL INTERPRETATION

    Office of Environmental Management (EM)

    1027-92, HAZARD CATEGORIZATION AND ACCIDENT ANALYSIS TECHNIQUES FOR COMPLIANCE WITH ... 1027-92, Hazard Categorization and Accident Analysis Techniques for Compliance with ...

  6. Memorandum for General Counsels, NEPA Liaisons and Participants in Scoping

    Energy.gov [DOE]

    As part of its continuing oversight of the implementation of the NEPA regulations, the Council on Environmental Quality has been investigating agency experience with scoping. This is the process by...

  7. MEMORANDUM FOR SEAN LEV DEPUTY GENERAL COUNSEL FOR ENVIRONMENT...

    Energy.gov [DOE] (indexed site)

    eradicate Burning, and Revegetation Methods on the 150,000 noxious weeds and invasive plants, and promote desirable plant species and wildlife Hanford Site, Richland,...

  8. MEMORANDUM To: DOE Office of General Counsel From: Tony Bacon

    Office of Environmental Management (EM)

    The DOE indicated that they did not believe any detailed testing was conducted. Hunter pointed out that the test data provided by Big Ass Fans ("BAF") appears contradictory to the ...

  9. Mary Jensen named executive VP and General Counsel

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    in 2008. Before joining BPA in 2002, she worked at the U.S. Office of the Solicitor in Phoenix, Ariz., advising the Bureau of Indian Affairs regarding operations of its...

  10. NNSA Names David Jonas General Counsel | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    "Dave's expertise and distinguished legal and military portfolio has been a great asset ... Marine Corps in 2000. He concluded his military service as a lieutenant colonel in 2001. ...

  11. Fermilab Office of General Counsel - Contract and Documents

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    In This Section: Links Documents Contract and Documents Click on a section below to expand it and show it's contents: Document Type Contract Original FRA Contract for Management of ...

  12. Contacts for the Assistant General Counsel for Civilian Nuclear...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Kathleen (Kathy) Martin, Attorney-Adviser 202-586-4467 kathleen.martin@hq.doe.gov K.C. Michaels, Attorney-Adviser 202-586-3430 kenneth.michaels@hq.doe.gov Cyrus Nezhad, ...

  13. Ellen C. Ginsberg VICE PRESIDENT, GENERAL COUNSEL & SECRETARY

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Richard Myers and Carol Berrigan (NEI), Thomas Mundy (Exelon Nuclear Partners), Jeanne Lopatto (Westinghouse Electric Company), and Bud Piland (The Babcock and Wilcox Company). ...

  14. Daniel Cohen Assistant General Counsel for Legislation and Regulatory...

    Office of Environmental Management (EM)

    Heating, and Refrigeration Institute; John Mandyck of Carrier Corporation; Jeffrey Harris of the Alliance to Save Energy; Jim VerShaw of Trane International, Incorporated; two ...

  15. Office of the Assistant General Counsel for Enforcement | Department...

    Energy.gov [DOE] (indexed site)

    the Department's efforts to ensure manufacturers deliver products that meet energy and water conservation standards. Compliant products save energy and money for American...

  16. Office of the Assistant General Counsel for Electricity and Fossil...

    Office of Environmental Management (EM)

    natural gas production, transmission, storage, importation and exportation; oil production and storage including the Strategic Petroleum Reserve and the Northwest Home ...

  17. Office of the Assistant General Counsel for Procurement and Financial...

    Energy.gov [DOE] (indexed site)

    contractual expenditures and financial assistance policy and activities. The office reviews and provides advice and assistance in the development of DOE procurement,...

  18. Office of the Assistant General Counsel for Technology Transfer...

    Energy.gov [DOE] (indexed site)

    to intellectual property (including patents, trademarks, copyrights, and technical ... Inventions made at most DOE laboratories are owned by the contractor operating the ...

  19. Contacts for the Assistant General Counsel for Legislation, Regulation...

    Office of Environmental Management (EM)

    Efficiency 202-586-9523 daniel.cohen@hq.doe.gov Catherine Goshe, Attorney-Adviser ... Petroleum Reserve (NPR) Patents Power Marketing Strategic Petroleum Reserve Tax (incl. ...

  20. Contacts for the Assistant General Counsel for Technology Transfer...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Non Disclosure Agreements Marianne Lynch 202-586-3815 Nathaniel Sloan 202-586-4792 Biotechnology Marianne Lynch 202-586-3815 Nathaniel Sloan 202-586-4792 Leadership John T. Lucas, ...

  1. DEPARTMENT OF ENERGY OFFICE OF GENERAL COUNSEL INTERPRETATION...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of any DOE Nuclear Safety Requirement or relieve the contractor of its duty to comply. ... For purposes of the assessment of civil penalties, the definition of DOE Nuclear Safety ...

  2. Office of the Assistant General Counsel for Civilian Nuclear...

    Energy Saver

    legal advice and support to the Department on issues involving nuclear materials, including: Long-Term Management of High-Level Radioactive Waste (HLW) and Spent Nuclear Fuel ...

  3. Fermilab Office of General Counsel - Ethics Program - Ask the...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Ask the Ethicist Questions & Answers Submit a Question Annual Reminders Reporting Fraud Holiday Parties Holidays and contractor gratuities From Fermilab Today, December 18,...

  4. Fermilab Office of General Counsel - Ethics Program - Submit...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Ask the Ethicist Questions & Answers Submit a Question Annual Reminders Reporting Fraud Holiday Parties Fermilab employees can complete the form below to submit a question to...

  5. Contacts for the Assistant General Counsel for Electricity and...

    Energy.gov [DOE] (indexed site)

    Subject Matter Attorney Contacts Electricity Delivery Energy Reliability Energy Emergency Lot Cooke 202-586-0503 Critical Infrastructure Protection Becca Smith 202-586-6335 ...

  6. Office of the Assistant General Counsel for Environment | Department...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    with the National Environmental Policy Act, the Clean Air Act, the Resource Conservation and Recovery Act, the Clean Water Act, the Migratory Bird Treaty Act, the ...

  7. Office of the Assistant General Counsel for Enforcement | Department...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ensure manufacturers deliver products that meet energy and water conservation standards. ... DOE Enforcement activities fall within three categories. Conservation standards cases deal ...

  8. Contacts for the Assistant General Counsel for International...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    202-586-3429 Thomas Reilly 202-586-3417 Cyber security; information quality (peer review of scientific products disseminated to the public) Elliot Oxman 202-586-1755 Janet Barsy ...

  9. Fermilab Office of General Counsel - Ethics Program - Ask the...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Fraud Holiday Parties Posted: December 22, 2009 Q. What should a FRA employee do with free items (pens, calendars, tote bags, radios and food) left by a vendor? A. As mentioned...

  10. Mr. Richard T. Thomas General Counsel for Petroleum Operations

    Office of Legacy Management (LM)

    Thomas: I am enclosing a copy of the radiological survey report for the Ashland Oil ... 1980), a preliminary survey of the Ashland Oil Company property northeast of the Seaway ...

  11. Scoping Guidance: Memorandum for General Counsels, NEPA Liaisons, and

    Energy Saver

    University of California's Costs Claimed and Related Internal Controls for Operation of Los Alamos National Laboratory DOE/IG-0596 April 2003 Los Alamos Costs and Controls Background ................................................................................ 1 Results of Audit .......................................................................... 1 Recommendations and Comments .......................................... 11 Appendices 1. Objective, Scope, and Methodology

  12. Contacts for the Assistant General Counsel for Procurement and...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Kevin R. Hilferty, Attorney-Adviser 202-586-8260 Kevin.hilferty@hq.doe.gov Renee S. Holland, Attorney-Adviser 513-246-0588 renee.holland@hq.doe.gov James J. Jurich, ...

  13. Contacts for the Assistant General Counsel for Environment (GC...

    Energy Saver

    Rachel Rosenthal, Attorney-Adviser 202-586-0021 rachel.rosenthal@hq.doe.gov Stephen Smith, Attorney-Adviser 202-586-8626 stephen.smith@hq.doe.gov Kari Twaite, Attorney-Adviser ...

  14. Microsoft Word - Opinion of Counsel.doc

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Opinion of Counsel This opinion is submitted pursuant to 10 C.F.R. 590.202(c) of the Department of Energy administrative procedures. The undersigned is counsel to __________________________________________. (Company) I have reviewed the corporate documents and it is my opinion that the proposed import/export of natural gas is/are within the company's corporate powers. Respectfully submitted. (Please Print Your Name) (Signature) Title

  15. Table 3.6 Selected Wood and Wood-Related Products in Fuel Consumption, 2010;

    Energy Information Administration (EIA) (indexed site)

    Table 3.6 Selected Wood and Wood-Related Products in Fuel Consumption, 2010; Level: National and Regional Data; Row: Selected NAICS Codes; Column: Energy Sources; Unit: Trillion Btu. Wood Residues and Wood-Related Pulping Liquor Wood Byproducts and NAICS or Biomass Agricultural Harvested Directly from Mill Paper-Related Code(a) Subsector and Industry Black Liquor Total(b) Waste(c) from Trees(d) Processing(e) Refuse(f) Total United States 311 Food 0 44 43 * * 1 311221 Wet Corn Milling 0 1 1 0 0 0

  16. Rachel Woods-Robinson | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Rachel Woods-Robinson About Us Rachel Woods-Robinson - Guest Blogger, Cycle for Science Most Recent Rain or Shine: We Cycle for Science July 2 Mountains, and Teachers, and a Bear, Oh My! June 2 Sol-Cycle: Biking Across America for Science Education May

  17. Flash pyrolysis products from beech wood

    SciTech Connect

    Beaumont, O.

    1985-04-01

    Flash pyrolysis products from beech wood obtained in an original pyrolysis apparatus were analyzed. The analytical procedure is described, and the composition of pyrolytic oil presented with more than 50 compounds. Comparison of pyrolytic products of cellulose, hemicellulose, and wood indicates the origin of each product. 19 references.

  18. Lake of the Woods County, Minnesota: Energy Resources | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    in Lake of the Woods County, Minnesota Baudette, Minnesota Roosevelt, Minnesota Williams, Minnesota Retrieved from "http:en.openei.orgwindex.php?titleLakeoftheWoodsC...

  19. Woods Hole Research Center Wind Turbine | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Hole Research Center Wind Turbine Jump to: navigation, search Name Woods Hole Research Center Wind Turbine Facility Woods Hole Research Center Wind Turbine Sector Wind energy...

  20. Council of Athabascan Tribal Governments - Wood Energy Program...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    0 November 2008 Gwitchyaa Zhee Corporation CATG - AWEA For-Profit Wood Energy Business Model Fort Yukon * Forest Management Service - CATG * For-Profit Wood Utility Company -...

  1. Compound and Elemental Analysis At Little Valley Area (Wood,...

    OpenEI (Open Energy Information) [EERE & EIA]

    Little Valley Area (Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Compound and Elemental Analysis At Little Valley Area (Wood,...

  2. Alaska Wood Biomass Energy Project Final Report

    SciTech Connect

    Jonathan Bolling

    2009-03-02

    The purpose of the Craig Wood Fired Boiler Project is to use waste wood from local sawmilling operations to provide heat to local public buildings, in an effort to reduce the cost of operating those buildings, and put to productive use a byproduct from the wood milling process that otherwise presents an expense to local mills. The scope of the project included the acquisition of a wood boiler and the delivery systems to feed wood fuel to it, the construction of a building to house the boiler and delivery systems, and connection of the boiler facility to three buildings that will benefit from heat generated by the boiler: the Craig Aquatic Center, the Craig Elementary School, and the Craig Middle School buildings.

  3. Solvolytic liquefaction of wood under mild conditions

    SciTech Connect

    Yu, S.M.

    1982-04-01

    Conversion of wood to liquid products requires cleavage of bonds which crosslink the wood structure. This study examines a low-severity wood solubilization process utilizing a solvent medium consisting of a small amount of sulfuric acid and a potentially wood-derivable alcohol. In one half hour of reaction time at 250/sup 0/C under 15 psia starting nitrogen pressure, over 95% of the wood (maf) was rendered acetone-soluble. The product is a soft, black, bitumen-like solid at room temperature but readily softens at 140/sup 0/C. Between 25 and 50% of the original wood oxygen, depending on alcohol used, was removed as water. Approximately 2 to 17% of the alcohols were retained in the product. Gel permeation chromatography showed that the product's median molecular weight is around 300. Based on experimental and literature results, a mechanism for wood solubilization is proposed. This involves protonation of the etheric oxygen atoms, leading to subsequent bond scission to form carbonium ions which are stabilized by solvent alkoxylation. At severe conditions, polymerization and condensation reactions result in acetone-insoluble materials.

  4. Wood fuel in fluidized bed boilers

    SciTech Connect

    Virr, M.J.

    1982-01-01

    Development of fluidized bed fire-tube and water-tube boilers for the burning of wood, gas, and refuse-derived fuel will be reviewed. Experience gained in already installed plants will be outlined. Research experiments results on the use of various forms of wood and other biomass fuels, such as wood chips, pellets, peach pits, nut shells and kernels and refuse-derived fuels, will be described for small and medium sized fire-tube boilers, and for larger water-tube boilers for co-generation. (Refs. 4).

  5. Stuart E. Hunt named Carlsbad Area Office counsel

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Stuart E. Hunt Named Carlsbad Area Office Counsel CARLSBAD, N.M., May 31, 2000 -- Stuart E. Hunt has been named Area Office Counsel for the U.S. Department of Energy's (DOE)...

  6. From the Woods to the Refinery

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    the Woods to the Refinery CORRIM Life Cycle Analyses of Woody Feedstocks Dr. Steve Kelley ... composition, sugar types, residue fuel value * TC models are sensitive to MC, much less ...

  7. Wood Fuel LP | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    77034 Region: Texas Area Sector: Biomass Product: Wood by-products consulting and marketing Website: www.woodfuel.com Coordinates: 29.6221328, -95.1872605 Show Map Loading...

  8. Wood and Pellet Heating | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    to avoid overheating, which wastes fuel and is one of the biggest causes of air pollution. ... urban and rural areas, smoke from wood burning is a major contributor to air pollution. ...

  9. Marin County- Wood Stove Replacement Rebate Program

    Energy.gov [DOE]

    Homes in the San Geronimo Valley (Forest Knolls, Lagunitas, San Geronimo, and Woodacre) can receive a rebate of $1,500 for the removal and replacement of non-certified wood burning appliances with...

  10. Logs Wood Chips Straw Corn Switchgrass

    Energy.gov [DOE] (indexed site)

    Clean energy can come from the sun. The energy in wind can make electricity. Bioenergy comes from plants we can turn into fuel. Logs Wood Chips Straw Corn Switchgrass We can use ...

  11. Wood Energy Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Energy Ltd Jump to: navigation, search Name: Wood Energy Ltd Place: Devon, United Kingdom Zip: EX16 9EU Product: Specialises in the design, installation and service of automatic...

  12. International Trade of Wood Pellets (Brochure)

    SciTech Connect

    Not Available

    2013-05-01

    The production of wood pellets has increased dramatically in recent years due in large part to aggressive emissions policy in the European Union; the main markets that currently supply the European market are North America and Russia. However, current market circumstances and trade dynamics could change depending on the development of emerging markets, foreign exchange rates, and the evolution of carbon policies. This fact sheet outlines the existing and potential participants in the wood pellets market, along with historical data on production, trade, and prices.

  13. New England Wood Pellet LLC | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Pellet LLC Jump to: navigation, search Name: New England Wood Pellet LLC Place: Jaffrey, New Hampshire Zip: NH 03452 Product: New England Wood Pellet LLC is a manufacturer and...

  14. Method of predicting mechanical properties of decayed wood

    DOEpatents

    Kelley, Stephen S.

    2003-07-15

    A method for determining the mechanical properties of decayed wood that has been exposed to wood decay microorganisms, comprising: a) illuminating a surface of decayed wood that has been exposed to wood decay microorganisms with wavelengths from visible and near infrared (VIS-NIR) spectra; b) analyzing the surface of the decayed wood using a spectrometric method, the method generating a first spectral data of wavelengths in VIS-NIR spectra region; and c) using a multivariate analysis to predict mechanical properties of decayed wood by comparing the first spectral data with a calibration model, the calibration model comprising a second spectrometric method of spectral data of wavelengths in VIS-NIR spectra obtained from a reference decay wood, the second spectral data being correlated with a known mechanical property analytical result obtained from the reference decayed wood.

  15. Genomics of wood-degrading fungi (Journal Article) | DOE PAGES

    Office of Scientific and Technical Information (OSTI)

    Genomics of wood-degrading fungi Prev Next Title: Genomics of wood-degrading fungi Authors: Ohm, Robin A. ; Riley, Robert ; Salamov, Asaf ; Min, Byoungnam ; Choi, In-Geol ; ...

  16. City of Wood River, Nebraska (Utility Company) | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    City of Wood River, Nebraska (Utility Company) Jump to: navigation, search Name: Wood River Municipal Power Place: Nebraska Phone Number: 308.583-2515; 308-583-2066 Website:...

  17. Wood County Electric Coop, Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Wood County Electric Coop, Inc Jump to: navigation, search Name: Wood County Electric Coop, Inc Place: Texas Phone Number: 1-866-415-2951 Website: www.wcec.org Facebook: https:...

  18. Contacts for the Chief Counsel for ARPA-E | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Chief Counsel for ARPA-E Contacts for the Chief Counsel for ARPA-E Office of the Chief Counsel to ARPA-E Please send all inquiries to: ARPA-E-Counsel@hq.doe.gov. Matthew Dunne, Acting Chief Counsel to ARPA-E 202-287-6079 Matthew.Dunne@hq.doe.gov

  19. Table 3.6 Selected Wood and Wood-Related Products in Fuel Consumption, 2002

    Energy Information Administration (EIA) (indexed site)

    6 Selected Wood and Wood-Related Products in Fuel Consumption, 2002;" " Level: National and Regional Data; " " Row: Selected NAICS Codes; Column: Energy Sources;" " Unit: Trillion Btu." ,,"S e l e c t e d","W o o d","a n d","W o o d -","R e l a t e d","P r o d u c t s" ,,,,,"B i o m a s s" ,,,,,,"Wood Residues" ,,,,,,"and","Wood-Related" " ","

  20. Additional TIAA-CREF Individual Counseling Sessions Offered Fall 2016 |

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Jefferson Lab Additional TIAA-CREF Individual Counseling Sessions Offered Fall 2016 Additional TIAA-CREF Individual Counseling Sessions Offered Fall 2016 TIAA-CREF will be offering Individual Counseling Sessions, where you can discuss your personal financial situation with a TIAA-CREF financial consultant on a confidential basis. They will be available to discuss how to help you achieve your financial goals by investing in financial solutions such as mutual funds, brokerage, life insurance

  1. Fast Curing of Composite Wood Products

    SciTech Connect

    Dr. Arthur J. Ragauskas

    2006-04-26

    The overall objective of this program is to develop low temperature curing technologies for UF and PF resins. This will be accomplished by: • Identifying the rate limiting UF and PF curing reactions for current market resins; • Developing new catalysts to accelerate curing reactions at reduced press temperatures and times. In summary, these new curing technologies will improve the strength properties of the composite wood products and minimize the detrimental effects of wood extractives on the final product while significantly reducing energy costs for wood composites. This study is related to the accelerated curing of resins for wood composites such as medium density fiberboard (MDF), particle board (PB) and oriented strandboard (OSB). The latter is frequently manufactured with a phenol-formaldehyde resin whereas ureaformaldehyde (UF) resins are usually used in for the former two grades of composite wood products. One of the reasons that hinder wider use of these resins in the manufacturing of wood composites is the slow curing speed as well as inferior bondability of UF resin. The fast curing of UP and PF resins has been identified as an attractive process development that would allow wood to be bonded at higher moisture contents and at lower press temperatures that currently employed. Several differing additives have been developed to enhance cure rates of PF resins including the use of organic esters, lactones and organic carbonates. A model compound study by Conner, Lorenz and Hirth (2002) employed 2- and 4-hydroxymethylphenol with organic esters to examine the chemical basis for the reported enhanced reactivity. Their studies suggested that the enhance curing in the presence of esters could be due to enhanced quinone methide formation or enhanced intermolecular SN2 reactions. In either case the esters do not function as true catalysts as they are consumed in the reaction and were not found to be incorporated in the polymerized resin product. An

  2. Wood and Wood Waste - Energy Explained, Your Guide To Understanding Energy

    Energy Information Administration (EIA) (indexed site)

    - Energy Information Administration Wood and Wood Waste Energy Explained - Home What Is Energy? Forms of Energy Sources of Energy Laws of Energy Units and Calculators Energy Conversion Calculators British Thermal Units (Btu) Degree-Days U.S. Energy Facts State and U.S. Territory Data Use of Energy In Industry For Transportation In Homes In Commercial Buildings Efficiency and Conservation Energy and the Environment Greenhouse Gases Effect on the Climate Where Greenhouse Gases Come From

  3. Effect of species and wood to bark ratio on pelleting of southern woods

    SciTech Connect

    Bradfield, J.; Levi, M.P.

    1984-01-01

    Six common southern hardwoods and loblolly pine were pelleted in a laboratory pellet mill. The pellet furnishes were blended to test the effect of different wood to bark ratios on pellet durability and production rate. Included was a ratio chosen to simulate the wood to bark ratio found in whole-tree chips. This furnish produced good quality pellets for all species tested. Pelleting of the pure wood of hardwoods was not successful; furnish routinely blocked the pellet mill dies. Pure pine wood, however, did produce acceptable pellets. It was noted that, as lignin and extractive content increased above a threshold level, the precentage of fines produced in a pellet durability test increased. Thus, all pine and tupelo wood/bark mixes produces high fines. This reduces the desirability of the pellets in the marketplace. Further research is necessary to confirm this relationship. This study suggests that both tree species and wood/bark ratio affect the durability of pellets and the rate with which they can be produced in a laboratory pellet mill. 9 references.

  4. Wood Energy Scenarios and Southern Markets

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    WOOD ENERGY SCENARIOS AND SOUTHERN MARKETS PRAKASH NEPAL 1 , KAREN ABT 2 , KEN SKOG 3 , ROBERT ABT 1 1 DEPARTMENT OF FORESTRY & ENVIRONMENTAL RESOURCES, NORTH CAROLINA STATE UNIVERSITY 2 USDA FOREST SERVICE, SOUTHERN RESEARCH STATION, RESEARCH TRIANGLE PARK 3 USDA FOREST SERVICE, FOREST PRODUCTS LABORATORY, MADISON, WI (RETIRED) Photo: Juergen Henkelmann, Alamy Photo: conserve-energy-future.com Photo: Duke University BACKGROUND  Previous billion ton reports did not explicitly consider

  5. 2016 ASI Annual Review UTK Wood Final

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Annual Review Meeting Development and Demonstration of a Model Based Assessment Process for Qualification of Embedded Digital Devices in Nuclear Power Applications Richard Wood The University of Tennessee NEET Project No.: 15-8097 October 12-13, 2016 2 Project Overview nProject Goal Develop an effective approach to resolve concerns about common-cause failure (CCF) vulnerabilities in embedded digital devices (EDDs) nFocus Address the challenge of establishing high levels of safety and reliability

  6. Renewed interest in prop supports as a replacement for wood cribs

    SciTech Connect

    Barczak, T.M.; Gearhart, D.F.

    1995-11-01

    Wood cribs have been the dominant form of supplemental support in coal mining for many years. Recently, there has been a renewed interest in prop supports as a replacement for wood cribbing due to the increasing cost of mine timber and engineering advancements in prop design to improve their stability and yield capability. Prop supports generally consume less material, can be installed in less time with less labor, and provide less restriction to mine ventilation than wood crib supports. Several prop supports are now available or under development. These include: (1) Strata Products Propsetter{trademark} Support System, (2) Heintzmann ACS and Super Prop; (3) MBK-Hydraulik MEGA prop; (4) Advanced Mining Technology Inc. (AMTI) BTS Mortar prop; (5) Dywidag Coal Post; (6) Western Support Systems YIPPI support; and (7) ``The Can`` support by Burrell Mining Products. A comparison of the performance and cost of these support systems to wood cribs is made to provide mine operators with information needed to underground installations are discussed. Included in this assessment are full scale tests of these supports conducted in the US Bureau of Mines` Mine Roof Stimulator.

  7. Characterization of emissions from a fluidized-bed wood chip home heating furnace. Final report Apr 82-May 83

    SciTech Connect

    Truesdale, R.S.

    1984-03-01

    The report gives results of measurements of emissions from a residential wood-chip combustor, operated in both a fluidized-bed and cyclone-fired mode, and their comparison with those from a conventional woodstove and industrial wood-fired boilers. In general, the combustion efficiency of the fluidized-bed and cyclone-fired wood-chip burner is higher than that of conventional woodstoves. Concomitant with this increase in efficiency is a decrease in most emissions. For the fluidized-bed tests, significant reductions of total hydrocarbons and CO were observed, compared to woodstove emissions. The cyclone test showed PAH levels far below those of conventional woodstoves, approaching levels measured in industrial wood-fired boilers. A baghouse, installed during two fluidized-bed tests, was extremely effective in reducing both particulate and PAH emissions. Method 5 samples from above the fluid bed suggest that appreciable PAH is formed in the upper region of the furnace or in the watertube heat exchangers. In general, the cyclone-fired mode was more effective in reducing emissions from residential wood combustion than the fluidized-bed mode.

  8. Method for improving separation of carbohydrates from wood pulping and wood or biomass hydrolysis liquors

    DOEpatents

    Griffith, William Louis; Compere, Alicia Lucille; Leitten, Jr., Carl Frederick

    2010-04-20

    A method for separating carbohydrates from pulping liquors includes the steps of providing a wood pulping or wood or biomass hydrolysis pulping liquor having lignin therein, and mixing the liquor with an acid or a gas which forms an acid upon contact with water to initiate precipitation of carbohydrate to begin formation of a precipitate. During precipitation, at least one long chain carboxylated carbohydrate and at least one cationic polymer, such as a polyamine or polyimine are added, wherein the precipitate aggregates into larger precipitate structures. Carbohydrate gel precipitates are then selectively removed from the larger precipitate structures. The method process yields both a carbohydrate precipitate and a high purity lignin.

  9. Massachusetts Schools Switch to Wood Pellets | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Massachusetts Schools Switch to Wood Pellets Massachusetts Schools Switch to Wood Pellets August 20, 2015 - 5:22pm Addthis Art created by a student at John Briggs Elementary School as part of their recent Green Ceremony. John Briggs Elementary is one of the Massachusetts schools switching their heating fuel source from petroleum based fuels to wood pellets. Art created by a student at John Briggs Elementary School as part of their recent Green Ceremony. John Briggs Elementary is one of the

  10. From the Woods to the Refinery | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    From the Woods to the Refinery From the Woods to the Refinery Breakout Session 2D-Building Market Confidence and Understanding II: Carbon Accounting and Woody Biofuels From the Woods to the Refinery Stephen S. Kelley, Principal and Department Head, Department of Forest Biomaterials, North Carolina State University kelley_biomass_2014.pdf (1.77 MB) More Documents & Publications GREET Bioenergy Life Cycle Analysis and Key Issues for Woody Feedstocks Biomass Program Peer Review Sustainability

  11. Wood Energy Scenarios and Southern Markets | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Wood Energy Scenarios and Southern Markets Wood Energy Scenarios and Southern Markets Breakout Session 1A: Assessing America's Biomass Potential (2016 Billion-Ton Report) Wood Energy Scenarios and Southern Markets Prakash Nepal, Research Assistant Professor, U.S. Department of Agriculture and North Carolina State University nepal_bioenergy_2016.pdf (1.96 MB) More Documents & Publications Bioenergy Demand in a Market Driven Forest Economy (U.S. South) U.S. Billion-Ton Update: Biomass Supply

  12. Wood-Burning Heating System Deduction | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    State Alabama Program Type Rebate Amount 100% Summary This statute allows individual taxpayers a deduction for the purchase and installation of a wood-burning heating system. The...

  13. Building America Case Study: Retrofit Measure for Embedded Wood...

    Energy Saver

    Existing Homes Building America Case Study Retrofit Measures for Embedded Wood Members in Insulated Mass Masonry Walls Lawrence, Massachusetts PROJECT INFORMATION Project Name: The...

  14. Thermal Pretreatment of Wood for Cogasification/cofiring of Biomass...

    Office of Scientific and Technical Information (OSTI)

    ...cofiring of Biomass and Coal Citation Details In-Document Search Title: Thermal Pretreatment of Wood for Cogasificationcofiring of Biomass and Coal Utilization of biomass as a ...

  15. Water Sampling At Dixie Valley Geothermal Area (Wood, 2002) ...

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Dixie Valley Geothermal Area (Wood, 2002) Exploration Activity Details...

  16. Water Sampling At Little Valley Area (Wood, 2002) | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Little Valley Area (Wood, 2002) Exploration Activity Details Location...

  17. Water Sampling At Alvord Hot Springs Area (Wood, 2002) | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Alvord Hot Springs Area (Wood, 2002) Exploration Activity Details Location...

  18. Water Sampling At Beowawe Hot Springs Area (Wood, 2002) | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Beowawe Hot Springs Area (Wood, 2002) Exploration Activity Details...

  19. Water Sampling At Salton Sea Area (Wood, 2002) | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Salton Sea Area (Wood, 2002) Exploration Activity Details Location Salton...

  20. Water Sampling At Mccredie Hot Springs Area (Wood, 2002) | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Mccredie Hot Springs Area (Wood, 2002) Exploration Activity Details...

  1. Water Sampling At Umpqua Hot Springs Area (Wood, 2002) | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Umpqua Hot Springs Area (Wood, 2002) Exploration Activity Details Location...

  2. Water Sampling At Zim's Hot Springs Geothermal Area (Wood, 2002...

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Zim's Hot Springs Geothermal Area (Wood, 2002) Exploration Activity...

  3. Water Sampling At Heber Area (Wood, 2002) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Heber Area (Wood, 2002) Exploration Activity Details Location Heber Area...

  4. Water Sampling At Breitenbush Hot Springs Area (Wood, 2002) ...

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Breitenbush Hot Springs Area (Wood, 2002) Exploration Activity Details...

  5. Water Sampling At Crane Hot Springs Area (Wood, 2002) | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Crane Hot Springs Area (Wood, 2002) Exploration Activity Details Location...

  6. Water Sampling At Mickey Hot Springs Area (Wood, 2002) | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Mickey Hot Springs Area (Wood, 2002) Exploration Activity Details Location...

  7. Title: Ames Blue Alert- Wood Cabinet Falls Apart

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Ames Blue Alert- Wood Cabinet Falls Apart Lessons Learned Statement- Cumulative damage can cause a loss of structural integrity. When furnishings are repeatedly exposed to water,...

  8. Energy and environmental innovations for chemically-preserved wood wastes

    SciTech Connect

    NREL

    2000-04-10

    This report is a fact sheet written for the Inventions and Innovation Program about a new method of disposing of chemically treated wood wastes.

  9. International WoodFuels LLC | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Maine Zip: 4101 Product: Maine-based pellet producer and installer of commercial wood pellet heating systems. Coordinates: 45.511795, -122.675629 Show Map Loading map......

  10. Wood Pulp Digetster Wall Corrosion Investigation

    SciTech Connect

    Giles, GE

    2003-09-18

    The modeling of the flow in a wood pulp digester is but one component of the investigation of the corrosion of digesters. This report describes the development of a Near-Wall-Model (NWM) that is intended to couple with a CFD model that determines the flow, heat, and chemical species transport and reaction within the bulk flow of a digester. Lubrication theory approximations were chosen from which to develop a model that could determine the flow conditions within a thin layer near the vessel wall using information from the interior conditions provided by a CFD calculation of the complete digester. The other conditions will be determined by coupled solutions of the wood chip, heat, and chemical species transport and chemical reactions. The NWM was to couple with a digester performance code in an iterative fashion to provide more detailed information about the conditions within the NW region. Process Simulations, Ltd (PSL) is developing the digester performance code. This more detailed (and perhaps more accurate) information from the NWM was to provide an estimate of the conditions that could aggravate the corrosion at the wall. It is intended that this combined tool (NWM-PSL) could be used to understand conditions at/near the wall in order to develop methods to reduce the corrosion. However, development and testing of the NWM flow model took longer than anticipated and the other developments (energy and species transport, chemical reactions and linking with the PSL code) were not completed. The development and testing of the NWM are described in this report. In addition, the investigation of the potential effects of a clear layer (layer reduced in concentration of wood chips) near the wall is reported in Appendix D. The existence of a clear layer was found to enhance the flow near the wall.

  11. General Counsel’s Office Issues Guidance on Inherently Governmental Functions

    Energy.gov [DOE]

    Today, the Office of the General Counsel issued guidance on the federal prohibition against contractors performing inherently governmental functions.  The guidance sets out the basic rules for what...

  12. Fuels for Schools Program Uses Leftover Wood to Warm Buildings

    Energy.gov [DOE]

    In parts of this country, wood seems like the outsider in the biomass family. New ethanol plants that grind down millions of bushels of corn in the Midwest and breakthroughs in algae along the coasts always garner the most attention. But in states like Montana, a place with over 70 million acres of forest, wood is the biofuel of choice.

  13. Slide 1

    National Nuclear Security Administration (NNSA)

    Bruce Diamond General Counsel Deputy General Counsel General Law & Litigation SFO Field Counsel (2) LAFO Field Counsel (3) NFO Field Counsel SRFO Field Counsel LFO Field Counsel ...

  14. Wood fuel technologies and group-oriented Timber Stand Improvement Program: model for waste wood utilization and resource renewal

    SciTech Connect

    Not Available

    1980-01-01

    Progress is reported on the following: educating and assisting landowners in the most efficient and profitable use of wood resources; developing local timber resources as energy alternatives by representing collective interests to Consumers Power, the woodchip industry, firewood retailers, country residents, and woodlot owners; and providing public information on the economics and methods of wood heat as a supplemental energy source. (MHR)

  15. Multipass comminution process to produce precision wood particles of uniform size and shape with disrupted grain structure from wood chips

    DOEpatents

    Dooley, James H; Lanning, David N

    2014-05-27

    A process of comminution of wood chips (C) having a grain direction to produce a mixture of wood particles (P), wherein the wood chips are characterized by an average length dimension (L.sub.C) as measured substantially parallel to the grain, an average width dimension (W.sub.C) as measured normal to L.sub.C and aligned cross grain, and an average height dimension (H.sub.C) as measured normal to W.sub.C and L.sub.C, and wherein the comminution process comprises the step of feeding the wood chips in a direction of travel substantially randomly to the grain direction one or more times through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of wood chip travel.

  16. Implementing Strategies for Drying and Pressing Wood Without Emissions Controls

    SciTech Connect

    Sujit Banerjee; Terrance Conners

    2007-09-07

    Drying and pressing wood for the manufacture of lumber, particleboard, oriented strand board (OSB), veneer and medium density fiberboard (MDF) release volatile organic compounds (VOCs) into the atmosphere. These emissions require control equipment that are capital-intensive and consume significant quantities of natural gas and electricity. The objective of our work was to understand the mechanisms through which volatile organic compounds are generated and released and to develop simple control strategies. Of the several strategies developed, two have been implemented for OSB manufacture over the course of this study. First, it was found that increasing final wood moisture by about 2-4 percentage points reduced the dryer emissions of hazardous air pollutants by over 70%. As wood dries, the escaping water evaporatively cools the wood. This cooling tapers off wood when the wood is nearly dry and the wood temperature rises. Thermal breakdown of the wood tissue occurs and VOCs are released. Raising the final wood moisture by only a few percentage points minimizes the temperature rise and reduces emissions. Evaporative cooling also impacts has implications for VOC release from wood fines. Flaking wood for OSB manufacture inevitable generates fines. Fines dry out rapidly because of their high surface area and evaporative cooling is lost more rapidly than for flakes. As a result, fines emit a disproportionate quantity of VOCs. Fines can be reduced in two ways: through screening of the green furnish and through reducing their generation during flaking. The second approach is preferable because it also increased wood yield. A procedure to do this by matching the sharpness angle of the flaker knife to the ambient temperature was also developed. Other findings of practical interests are as follows: Dielectric heating of wood under low-headspace conditions removes terpenes and other extractives from softwood; The monoterpene content in trees depend upon temperature and seasonal

  17. Feasibility for Wood Heat - Collaborative Integrated Wood Energy Program for Yukon Flats Villages

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    for Wood Heat * Non-Profit Consortium of Ten Tribal Governments within the Yukon Flats. * CATG Administers several Tribal Programs on behalf of the Tribes. * CATG also applies for and administers several other grants. - IHS, Regional Clinic (Fort Yukon), Health Aids in Each Village, drug and alcohol programs, and other health related programs. - Natural Resources, EPA/IGAP, ANA (Traditional Land use Planning and Mapping), GIS, USDA RC&D, Contracts/Compacts with the USF&W (first tribal

  18. Dynamics of Wood Chip Storage: Task I

    SciTech Connect

    Sworden, P. G.

    1982-08-01

    The purpose of this report is to document Dow Corning's decision making process in establishing a fuelwood supply and procurement system with emphasis on how this relates to private forest landowners. The report will provide background on the decision to investigate wood energy systems and key management questions in that decision process. Information used to answer the key management questions will be high-lighted and its usefulness documented, including resource assessment and requirements. The report will discuss the development and implementation of the landowner assistance program and supplier-producer program. At the end of the report, Dow Corning's experiences will be summarized and some conclusions drawn concerning the success of the program.

  19. General Information

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    information General Information JLF Contacts Request a Tour

  20. Composites of Polystyrene/Wood Fiber, Processing Effect to Creep Resistance

    SciTech Connect

    Romero-Balderrama, L.; Mendoza-Duarte, M. E.; Flores-Gallardo, S. G.; Ibarra-Gomez, R. [Centro de Investigacion en Materiales Avanzados. Miguel de Cervantes 120, Complejo Industrial Chihuahua, 31109. Chihuahua, Chih. (Mexico); Gaspar-Rosas, A. [TA Instruments-Waters LLC. 109 Lukens Drive New Castle, DE 19720 (United States)

    2008-07-07

    In the present work, PS/wood fiber composites were studied in relation to their creep response as to be affected by the incorporation of a silane type coupling agent. Two elaboration variables were also considered in the experiments: wood fiber content and type of composites processing (compression, extrusion and injection molding). A series of weight ratios PS/wood fiber, with and without coupling agent, were prepared, 90/10, 80/20, 70/30 and 60/40. For the compatibilized series, 1% wt of silane coupling agent in relation to the polystyrene weight was employed. The creep tests were performed inside the lineal viscoelastic region at 80 deg. C. A general improvement of the creep resistance for the compatibilized composites was observed independently of the elaboration process. However, the injection molded samples showed by far the lowest deformation with time. This behavior suggests that the high orientation of the fibers generated by the injection molding process, in relation to the extrusion and compression molding, promotes a higher superficial area of treated fiber to be in contact with the PS matrix, which enhances the adhesion and in consequence the resistance to creep.

  1. Wood chips: an exploration of problems and opportunities. Final report

    SciTech Connect

    Not Available

    1985-01-01

    This report evaluates the current use of and potential market for wood chips as a fuel in the Northeast. This study covers the residential, commercial, and light industrial sectors and addresses cost, reliability, marketing systems, and technology improvements. A review of the available equipment for wood chip harvesting, processing, handling, drying, and transport is included. Three representative strategic business guides for different chip suppliers are presented. There is also a recommended action plan for future programs with initiatives that could facilitate the development of the wood chip market. 25 refs., 8 figs., 11 tabs.

  2. Wood-Polymer composites obtained by gamma irradiation

    SciTech Connect

    Gago, J.; Lopez, A.; Rodriguez, J.; Santiago, J.; Acevedo, M.

    2007-10-26

    In this work we impregnate three Peruvian woods (Calycophy spruceanum Be, Aniba amazonica Meiz and Hura crepitans L) with styrene-polyester resin and methyl methacrylate. The polymerization of the system was promoted by gamma radiation and the experimental optimal condition was obtained with styrene-polyester 1:1 and 15 kGy. The obtained composites show reduced water absorption and better mechanical properties compared to the original wood. The structure of the wood-polymer composites was studied by light microscopy. Water absorption and hardness were also obtained.

  3. An economical and market analysis of Canadian wood pellets.

    SciTech Connect

    Peng, J.

    2010-08-01

    This study systematically examined the current and future wood pellet market, estimated the cost of Canadian torrefied pellets, and compared the torrefied pellets with the conventional pellets based on literature and industrial data. The results showed that the wood pellet industry has been gaining significant momentum due to the European bioenergy incentives and the rising oil and natural gas prices. With the new bioenergy incentives in USA, the future pellets market may shift to North America, and Canada can potentially become the largest pellet production centre, supported by the abundant wood residues and mountain pine beetle (MPB) infested trees.

  4. Method for lowering the VOCS emitted during drying of wood products

    DOEpatents

    Banerjee, Sujit (1832 Jacksons Creek Point, Marietta, GA 30068); Boerner, James Robert (154 Junedale Rd., Cincinnati, OH 45218); Su, Wei (2262 Orleans Ave., Marietta, GA 30062)

    2000-01-01

    The present invention is directed to a method for removal of VOCs from wood products prior to drying the wood products. The method of the invention includes the steps of providing a chamber having an opening for receiving wood and loading the chamber with green wood. The wood is loaded to an extent sufficient to provide a limited headspace in the chamber. The chamber is then closed and the wood is heated in the chamber for a time and at a temperature sufficient to saturate the headspace with moisture and to substantially transfer VOCs from the wood product to the moisture in the headspace.

  5. Huntington Woods, Michigan: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Hide Map This article is a stub. You can help OpenEI by expanding it. Huntington Woods is a city in Oakland County, Michigan. It falls under Michigan's 12th...

  6. Laguna Woods, California: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Hide Map This article is a stub. You can help OpenEI by expanding it. Laguna Woods is a city in Orange County, California. It falls under California's 48th...

  7. Mission Woods, Kansas: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    article is a stub. You can help OpenEI by expanding it. Mission Woods is a city in Johnson County, Kansas. It falls under Kansas's 3rd congressional district.12 References...

  8. Study of emissions from small woods - fired boiler systems

    SciTech Connect

    1994-12-31

    This short article announces a testing project RFP to determine the air emissions produced by small wood-chip fired combustion systems and to determine associated health risks if any.

  9. Improving combustion in residential size wood chip fireboxes

    SciTech Connect

    Huff, E.R.

    1982-12-01

    In a small experimental wood chip firebox with separate control of grate and overfire air, combustion intensity was increased with reduction in flyash and carbon monoxide by reducing air through the grate to a small fraction of stoichiometric air.

  10. Community Based Wood Heat System for Fort Yukon

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    80,000 acres in one month Proposed Rural Wood Fuel Supply System *Capital costs for system capable of producing 7,000 TPY: 600,000 Key Obstacles to Overcome Development...

  11. Wood Dale, Illinois: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Hide Map This article is a stub. You can help OpenEI by expanding it. Wood Dale is a city in DuPage County, Illinois. It falls under Illinois' 6th congressional...

  12. Wood County, West Virginia: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Hide Map This article is a stub. You can help OpenEI by expanding it. Wood County is a county in West Virginia. Its FIPS County Code is 107. It is classified as...

  13. Wood County, Texas: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Hide Map This article is a stub. You can help OpenEI by expanding it. Wood County is a county in Texas. Its FIPS County Code is 499. It is classified as ASHRAE...

  14. Wood Village, Oregon: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Hide Map This article is a stub. You can help OpenEI by expanding it. Wood Village is a city in Multnomah County, Oregon. It falls under Oregon's 3rd...

  15. Wood-Ridge, New Jersey: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Wood-Ridge, New Jersey: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 40.8456555, -74.0879195 Show Map Loading map... "minzoom":false,"mappin...

  16. Wood-Composites Industry Benefits from ALS Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    that wood-composite development is something that will bolster the U.S. economy, matches the funding from the WBC. "People in this industry are always looking for ways to...

  17. How Much Wood Would a North Country School Chip

    Office of Energy Efficiency and Renewable Energy (EERE)

    North Country School in Lake Placid, New York, recently installed a high-efficiency wood chip boiler using Recovery Act funds from the New York State Energy Research and Development Authority. Using wood sourced from their sustainably managed woodlot and local forests, the school will be able to cut energy costs by $38,970 annually and reduce carbon dioxide emissions by 184 tons per year.

  18. Genomics of wood-degrading fungi (Journal Article) | DOE PAGES

    Office of Scientific and Technical Information (OSTI)

    Genomics of wood-degrading fungi Title: Genomics of wood-degrading fungi Authors: Ohm, Robin A. ; Riley, Robert ; Salamov, Asaf ; Min, Byoungnam ; Choi, In-Geol ; Grigoriev, Igor V. Publication Date: 2014-11-01 OSTI Identifier: 1222394 Grant/Contract Number: AC02-05CH11231 Type: Publisher's Accepted Manuscript Journal Name: Fungal Genetics and Biology (Print) Additional Journal Information: Journal Name: Fungal Genetics and Biology (Print); Journal Volume: 72; Journal Issue: C; Journal ID: ISSN

  19. Evaluation of processes for producing gasoline from wood. Final report

    SciTech Connect

    1980-05-01

    Three processes for producing gasoline from wood by pyrolysis have been investigated. Technical and economic comparisons among the processes have been made, based on a hypothetical common plant size of 2000 tons per day green wood chip feedstock. In order to consider the entire fuel production process, the energy and cost inputs for producing and delivering the feedstock were included in the analysis. In addition, perspective has been provided by comparisons of the wood-to-gasoline technologies with other similar systems, including coal-to-methanol and various biomass-to-alcohol systems. Based on several assumptions that were required because of the candidate processes' information gaps, comparisons of energy efficiency were made. Several descriptors of energy efficiency were used, but all showed that methanol production from wood, with or without subsequent processing by the Mobil route to gasoline, appears most promising. It must be emphasized, however, that the critical wood-to-methanol system remains conceptual. Another observation was that the ethanol production systems appear inferior to the wood-to-gasoline processes. Each of the processes investigated requires further research and development to answer the questions about their potential contributions confidently. The processes each have so many unknowns that it appears unwise to pursue any one while abandoning the others.

  20. Moisture Distribution and Flow During Drying of Wood and Fiber

    SciTech Connect

    Zink-Sharp, Audrey; Hanna, Robert B.

    2001-12-28

    New understanding, theories, and techniques for moisture flow and distribution were developed in this research on wood and wood fiber. Improved understanding of the mechanisms of flake drying has been provided. Observations of flake drying and drying rate curves revealed that rate of moisture loss consisted of two falling rate periods and no constant rate drying period was observed. Convective heat transfer controls the first period, and bound water diffusion controls the second period. Influence of lower drying temperatures on bending properties of wood flakes was investigated. Drying temperature was found to have a significant influence on bending stiffness and strength. A worksheet for calculation of the energy required to dry a single strandboard flake was developed but has not been tested in an industrial setting yet. A more complete understanding of anisotropic transverse shrinkage of wood is proposed based on test results and statistical analysis. A simplified mod el of a wood cell's cross-section was drawn for calculating differential transverse shrinkage. The model utilizes cell wall thickness and microfibrillar packing density and orientation. In spite of some phenomena of cell wall structure not yet understood completely, the results might explain anisotropic transverse shrinkage to a major extent. Boundary layer theory was found useful for evaluating external moisture resistance during drying. Simulated moisture gradients were quire comparable to the actual gradients in dried wood. A mathematical procedure for determining diffusion and surface emission coefficients was also developed. Thermal conductivity models of wood derived from its anatomical structure were created and tested against experimental values. Model estimations provide insights into changes in heat transfer parameters during drying. Two new techniques for measuring moisture gradients created in wood during drying were developed. A new technique that utilizes optical properties of cobalt

  1. Extensive sampling of basidiomycete genomes demonstrates inadequacy of the white rot/ brown rot paradigm for wood decay fungi

    SciTech Connect

    Riley, Robert; Salamov, Asaf; Brown, Daren W.; Nagy, Laszlo G.; Floudas, Dimitris; Held, Benjamin; Levasseur, Anthony; Lombard, Vincent; Morin, Emmanuelle; Otillar, Robert; Lindquist, Erika; Sun, Hui; LaButti, Kurt; Schmutz, Jeremy; Jabbour, Dina; Luo, Hong; Baker, Scott E.; Pisabarro, Antonio; Walton, Jonathan D.; Blanchette, Robert; Henrissat, Bernard; Martin, Francis; Cullen, Dan; Hibbett, David; Grigoriev, Igor V.

    2014-03-14

    Basidiomycota (basidiomycetes) make up 32percent of the described fungi and include most wood decaying species, as well as pathogens and mutualistic symbionts. Wood-decaying basidiomycetes have typically been classified as either white rot or brown rot, based on the ability (in white rot only) to degrade lignin along with cellulose and hemicellulose. Prior genomic comparisons suggested that the two decay modes can be distinguished based on the presence or absence of ligninolytic class II peroxidases (PODs), as well as the abundance of enzymes acting directly on crystalline cellulose (reduced in brown rot). To assess the generality of the white rot/brown rot classification paradigm we compared the genomes of 33 basidiomycetes, including four newly sequenced wood decayers, and performed phylogenetically-informed Principal Components Analysis (PCA) of a broad range of gene families encoding plant biomass-degrading enzymes. The newly sequenced Botryobasidium botryosum and Jaapia argillacea genomes lack PODs, but possess diverse enzymes acting on crystalline cellulose, and they group close to the model white rot species Phanerochaete chrysosporium in the PCA. Furthermore, laboratory assays showed that both B. botryosum and J. argillacea can degrade all polymeric components of woody plant cell walls, a characteristic of white rot. We also found expansions in reducing polyketide synthase genes specific to the brown rot fungi. Our results suggest a continuum rather than a dichotomy between the white rot and brown rot modes of wood decay. A more nuanced categorization of rot types is needed, based on an improved understanding of the genomics and biochemistry of wood decay.

  2. Decision-maker's guide to wood fuel for small industrial energy users. Final report. [Includes glossary

    SciTech Connect

    Levi, M. P.; O'Grady, M. J.

    1980-02-01

    The technology and economics of various wood energy systems available to the small industrial and commercial energy user are considered. This book is designed to help a plant manager, engineer, or others in a decision-making role to become more familiar with wood fuel systems and make informed decisions about switching to wood as a fuel. The following subjects are discussed: wood combustion, pelletized wood, fuel storage, fuel handling and preparation, combustion equipment, retrofitting fossil-fueled boilers, cogeneration, pollution abatement, and economic considerations of wood fuel use. (MHR)

  3. Comminution process to produce precision wood particles of uniform size and shape with disrupted grain structure from wood chips

    DOEpatents

    Dooley, James H.; Lanning, David N.

    2015-06-23

    A process of comminution of wood chips (C) having a grain direction to produce a mixture of wood particles (P), wherein the wood chips are characterized by an average length dimension (L.sub.C) as measured substantially parallel to the grain, an average width dimension (W.sub.C) as measured normal to L.sub.C and aligned cross grain, and an average height dimension (H.sub.C) as measured normal to W.sub.C and L.sub.C, wherein W.sub.C>L.sub.C, and wherein the comminution process comprises the step of feeding the wood chips in a direction of travel substantially randomly to the grain direction through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of wood chip travel, wherein the cutting discs have a uniform thickness (T.sub.D), and wherein at least one of L.sub.C, W.sub.C, and H.sub.C is less than T.sub.D.

  4. Comminution process to produce precision wood particles of uniform size and shape with disrupted grain structure from wood chips

    DOEpatents

    Dooley, James H; Lanning, David N

    2013-08-13

    A process of comminution of wood chips (C) having a grain direction to produce a mixture of wood particles (P), wherein the wood chips are characterized by an average length dimension (L.sub.C) as measured substantially parallel to the grain, an average width dimension (W.sub.C) as measured normal to L.sub.C and aligned cross grain, and an average height dimension (H.sub.C) as measured normal to W.sub.C and L.sub.C, and wherein the comminution process comprises the step of feeding the wood chips in a direction of travel substantially randomly to the grain direction through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of wood chip travel, wherein the cutting discs have a uniform thickness (T.sub.D), and wherein at least one of L.sub.C, W.sub.C, and H.sub.C is greater than T.sub.D.

  5. Gas pollution control apparatus and method and wood drying system employing same

    SciTech Connect

    Eatherton, J.R.

    1984-02-14

    Pollution control apparatus and method are disclosed in which hot exhaust gas containing pollutants including solid particles and hydrocarbon vapors is treated by transmitting such exhaust gas through a container containing wood members, such as wood chips, which serve as a filter media for filtering out such pollutants by causing such solids to deposit and such hydrocarbon vapors to condense upon the surface of the wood members. The contaminated wood chips are discharged from the filter and further processed into chip board or other commercial wood products thereby disposing of the pollutants. Lumber may be used as the wood members of the filter in a lumber kiln by deposition of solid particles on the rough surface of such lumber. The contaminated surfaces of the lumber are removed by a planer which produces a smooth finished lumber and contaminated wood chips that may be processed into chip board or other commercial wood products. A wood drying system employing such pollution control apparatus and method includes a hot air dryer for wood or other organic material, such as a wood chip rotary dryer or a wood veneer dryer, which produces hot exhaust gases containing pollutants including hydrocarbon vapors and solid particles. This hot exhaust air is transmitted through a lumber kiln to dry lumber thereby conserving heat energy and causing solid particle pollutants to deposit on the surface of the lumber. The kiln exhaust air containing solid and hydrocarbon vapor pollutants is then transmitted up through a filter stack of wood chips.

  6. Wood energy in Georgia: a five-year progress report

    SciTech Connect

    Not Available

    1982-01-01

    An increasing number of industrial plants and public and residential facilities in Georgia are using wood, Georgia's greatest renewable energy source, to replace gas, oil, coal, and electricity. All wood systems described in this report are or will soon be in operation in schools, prisons, hospitals, and other state facilities, and are producing substantial financial savings. The economic values from increased markets and jobs are important in all areas of the state, with total benefits projected at $2.9 million a year for state taxpayers. 2 figures.

  7. EEO Complaint Process EEO Complaint Process INFORMAL PROCESS-COUNSELING

    National Nuclear Security Administration (NNSA)

    EEO Complaint Process EEO Complaint Process INFORMAL PROCESS-COUNSELING National Nuclear Security Administration Office of Civil Rights Equal Employment Opportunity: Collaborating For Mission Success EEO POLICY The Department of Energy (DOE) does not discriminate on the basis of age, color, race, disability (physical or mental), national origin, reprisal, religion, sex (including sexual harassment), sexual orientation, genetic information or any other non-merit factor. DOE is committed to equal

  8. LG to DOE General Counsel; Re:Request for Comment on Large Capacity...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    in excess of 3.8 cu ft, LG Vice President of Government Relations and Communications, John I. Taylor, submits this letter outlining LG's views on the set of "unique circumstances." ...

  9. GE to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers

    Energy.gov [DOE]

    GE urges the department engage in rulmaking to amend the clothes washer test procedure to reflect efficiency standards of large-capacity residential clothes washer machines. GE also urges the DOE...

  10. DOE General Counsel Issues Arbitration Guidance for M&O Contractors...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    the cost of the process and to ensure that the relief afforded is cabined in some fashion - and, at a minimum, is no broader than that which could be afforded by a court, and ...

  11. Designation Order No. 00-03.00 to the General Counsel

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2001-12-13

    Designated as the Department's Regulatory Policy Officer, as that title and its responsibilities are described in the Executive Order.

  12. DOE's General Counsel Releases Guidance on Ex Parte Communications During Informal Rulemaking Proceedings

    Energy.gov [DOE]

    Washington, DC - The Department of Energy today announced guidance on ex parte communications during informal rulemaking proceedings.  The guidance is intended to encourage the public to provide...

  13. Electrolux to DOE General Counsel; Re:Request for Comment on...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    basket volume of the unit, there should be no retest unless there is a component or design change that affects the energy use of the unit. PDF icon Letter from Electrolux to...

  14. Microsoft Word - XX 15 Jensen named BPA general counsel (3) FINAL...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    in creating national guidelines for power marketing administrations in states where marijuana sales are lawful under state statutes. She also instituted new processes that enable...

  15. 01-02-2008 - Wood Cabinet Falls Apart | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    8 - Wood Cabinet Falls Apart Document Number: NA Effective Date: 012008 File (public): PDF icon 01-02-2008blue...

  16. General Engineers

    Energy Information Administration (EIA) (indexed site)

    General Engineers The U.S. Energy Information Administration (EIA) within the Department of Energy has forged a world-class information program that stresses quality, teamwork, and employee growth. In support of our program, we offer a variety of profes- sional positions, including the General Engineer, whose work is associated with analytical studies and evaluation projects pertaining to the operations of the energy industry. Responsibilities: General Engineers perform or participate in one or

  17. Effect of wood chip size on update gasifier-combustor operation

    SciTech Connect

    Payne, F.A.; Dunlap, J.L.; Caussanel, P.

    1984-01-01

    Three wood chip sizes were tested in a 0.3 GJ/h updraft gasifier-combustor. Thermal output did not vary significantly between wood chips. Pressure and temperature profiles were measured in the gasifier bed. Channeling occurred with the small wood chips. Efficiency of the combustor was determined by a mass and energy balance and an enthalpy technique.

  18. Wood pellet market and trade: a global perspective

    SciTech Connect

    Chun Sheng Goh; Martin Junginger; Maurizio Cocchi; Didier Marchal; Daniela Thran; Christiane Hennig; Jussi Heinimo; Lars Nikolaisen; Peter-Paul Schouwenberg; Douglas Bradley; J. Richard Hess; Jacob J. Jacobson; Leslie Ovard; Michael Deutmeyer

    2001-01-01

    This perspective provides an overview of wood pellet markets in a number of countries of high significance, together with an inventory of market factors and relevant past or existing policies. In 2010, the estimated global wood pellet production and consumption were close to 14.3 Mt (million metric tonnes) and 13.5 Mt, respectively, while the global installed production capacity had reached over 28 Mt. Two types of pellets are mainly traded (i) for residential heating and (ii) for large-scale district heating or co-fi ring installations. The EU was the primary market, responsible for nearly 61% and 85% of global production and consumption, respectively in 2010. EU markets were divided according to end use: (i) residential and district heating, (ii) power plants driven market, (iii) mixed market, and (iv) export-driven countries. North America basically serves as an exporter, but also with signifi cant domestic consumption in USA. East Asia is predicted to become the second-largest consumer after the EU in the near future. The development perspective in Latin America remains unclear. Five factors that determine the market characteristics are: (i) the existence of coal-based power plants, (ii) the development of heating systems, (iii) feedstock availability, (iv) interactions with wood industry, and (v) logistics factor. Furthermore, intervention policies play a pivotal role in market development. The perspective of wood pellets industry was also analyzed from four major aspects: (i) supply potential, (ii) logistics issues, (iii) sustainability considerations, and (iv) technology development.

  19. Vertical feed stick wood fuel burning furnace system

    DOEpatents

    Hill, Richard C.

    1982-01-01

    A stove or furnace for efficient combustion of wood fuel includes a vertical feed combustion chamber (15) for receiving and supporting wood fuel in a vertical attitude or stack. A major upper portion of the combustion chamber column comprises a water jacket (14) for coupling to a source of water or heat transfer fluid for convection circulation of the fluid. The locus (31) of wood fuel combustion is thereby confined to the refractory base of the combustion chamber. A flue gas propagation delay channel (34) extending laterally from the base of the chamber affords delayed travel time in a high temperature refractory environment sufficient to assure substantially complete combustion of the gaseous products of wood burning with forced air prior to extraction of heat in heat exchanger (16). Induced draft draws the fuel gas and air mixture laterally through the combustion chamber and refractory high temperature zone to the heat exchanger and flue. Also included are active sources of forced air and induced draft, multiple circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

  20. Vertical feed stick wood fuel burning furnace system

    DOEpatents

    Hill, Richard C.

    1984-01-01

    A new and improved stove or furnace for efficient combustion of wood fuel including a vertical feed combustion chamber for receiving and supporting wood fuel in a vertical attitude or stack, a major upper portion of the combustion chamber column comprising a water jacket for coupling to a source of water or heat transfer fluid and for convection circulation of the fluid for confining the locus of wood fuel combustion to the bottom of the vertical gravity feed combustion chamber. A flue gas propagation delay channel extending from the laterally directed draft outlet affords delayed travel time in a high temperature environment to assure substantially complete combustion of the gaseous products of wood burning with forced air as an actively induced draft draws the fuel gas and air mixture laterally through the combustion and high temperature zone. Active sources of forced air and induced draft are included, multiple use and circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

  1. Production of chemical feedstock by the methanolysis of wood

    DOEpatents

    Steinberg, M.; Fallon, P.

    1983-06-01

    A process is discussed for the production of ethylene, benzene and carbon monoxide from particulated biomass such as wood by reaction with methane at a temperature of from 700/sup 0/C to 1200/sup 0/C, at a pressure of from 20 psi to 100 psi for a period of from 0.2 to 10 seconds.

  2. Production of chemical feedstock by the methanolysis of wood

    DOEpatents

    Steinberg, Meyer; Fallon, Peter

    1984-07-31

    A process for the production of ethylene, benzene and carbon monoxide from particulated biomass such as wood by reaction with methane at a temperature of from 700.degree. C. to 1200.degree. C., at a pressure of from 20 psi to 100 psi for a period of from 0.2 to 10 seconds.

  3. Measure Guideline. Wood Window Repair, Rehabilitation, and Replacement

    SciTech Connect

    Baker, P.; Eng, P.

    2012-12-01

    This measure guideline provides information and guidance on rehabilitating, retrofitting, and replacing existing window assemblies in residential construction. The intent is to provide information regarding means and methods to improve the energy and comfort performance of existing wood window assemblies in a way that takes into consideration component durability, in-service operation, and long term performance of the strategies.

  4. Using recycled wood waste as a fuel in the northeast: A handbook for prospective urban wood waste producers, suppliers and consumers

    SciTech Connect

    Prast, W.G.; Donovan, C.T.

    1988-03-01

    This report provides a comprehensive analysis of existing and future markets for recycled wood wastes in the eleven-state northeast region. The purpose of the report is to estimate the availability of wood and woody materials in the solid waste stream and to determine the technical and economic viability of separating and recycling them for other uses. The topics discussed include: current and future markets for recycled wood wastes; key components of successful wood waste processing facilities; decisionmaking process used to determine technical and economic viability of a proposed processing facility; environmental regulations and the permitting process required for recycled wood waste processors and users; case studies and annotated listings of existing wood waste processors and uses; detailed assessments of market opportunities in three metropolitan areas including Boston, New York, and Philadelphia; and a proposed action plan to stimulate and facilitate future market development.

  5. Supplemental Comments by The Office of the Ohio Consumers Counsel ("OCC") |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy by The Office of the Ohio Consumers Counsel ("OCC") Supplemental Comments by The Office of the Ohio Consumers Counsel ("OCC") The Office of the Ohio Consumers' Counsel is Ohio's statutory residential utility consumer advocate, empowered under Chapter 4911 of the Ohio Revised Code to represent the interests of Ohio residential utility consumers in proceedings before state and federal administrative agencies and courts. Supplemental Comments by The

  6. Size, shape and flow characterization of ground wood chip and ground wood pellet particles

    DOE PAGES [OSTI]

    Rezaei, Hamid; Lim, C. Jim; Lau, Anthony; Sokhansanj, Shahab

    2016-07-11

    Size, shape and density of biomass particles influence their transportation, fluidization, rates of drying and thermal decomposition. Pelleting wood particles increases the particle density and reduces the variability of physical properties among biomass particles. In this study, pine chips prepared for pulping and commercially produced pine pellets were ground in a hammer mill using grinder screens of 3.2, 6.3, 12.7 and 25.4mmperforations. Pellets consumed about 7 times lower specific grinding energy than chips to produce the same size of particles. Grinding pellets produced the smaller particles with narrower size distribution than grinding chips. Derived shape factors in digital image analysismore » showed that chip particles were rectangular and had the aspect ratios about one third of pellet particles. Pellet particles were more circular shape. The mechanical sieving underestimated the actual particle size and did not represent the size of particles correctly. Instead, digital imaging is preferred. Angle of repose and compressibility tests represented the flow properties of ground particles. Pellet particles made a less compacted bulk, had lower cohesion and did flow easier in a pile of particles. In conclusion, particle shape affected the flow properties more than particle size« less

  7. Terri Slack Named Site Counsel for NNSA's Y-12 Site Office | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) Terri Slack Named Site Counsel for NNSA's Y-12 Site Office January 12, 2006 PDF icon NR-01-06.pdf

  8. Impact of Cardiovascular Counseling and Screening in Hodgkin Lymphoma Survivors

    SciTech Connect

    Daniëls, Laurien A.; Krol, Stijn D.G.; Graaf, Michiel A. de; Scholte, Arthur J.H.A.; Veer, Mars B. van 't; Putter, Hein; Roos, Albert de; Schalij, Martin J.; Poll-Franse, Lonneke V. van de; Creutzberg, Carien L.

    2014-09-01

    Purpose: Cardiovascular disease (CVD) is the most common nonmalignant cause of death in Hodgkin lymphoma (HL) survivors, especially after mediastinal irradiation. The role of screening for CVD in HL survivors is unclear, but confrontation with risks of CVD may have a negative influence on health-related quality of life (HRQL). As part of a phase 2 screening study using computed tomography angiography (CTA) among HL survivors, an HRQL analysis was done to evaluate the emotional and practical burden and perceived benefits of screening and the effect of CVD-specific counseling on patient satisfaction. Methods and Materials: Patients who participated in the screening study also took part in the HRQL study. The impact of undergoing screening was evaluated with a 9-item questionnaire, and impact on HRQL with the European Organization for Research and Treatment of Cancer (EORTC) Quality of Life Core Questionnaire C30, version 3.0. The effect of counseling of CVD on perceived provision of information was evaluated with EORTC INFO-25. All questionnaires were completed at baseline and after screening. Results: Baseline questionnaires were received from 48 participants, and 43 completed questionnaires after screening. Mean age was 47 years, and mean time since diagnosis was 21 years. Of the total, 93% of subjects were content with participating, and 80% did not find the emphasis placed on late effects burdensome, although screening did have a small impact on social functioning and global quality of life. Perceived information on disease, medical tests, and treatment increased significantly after screening (P<.01). Differences were clinically relevant. There were no differences in perceived information between patients with and without screen-detected CVD. Conclusions: Screening was evaluated favorably, whether CTA showed abnormalities or not. Extensive counseling resulted in substantially increased provision of information and improved information satisfaction. Screening by

  9. Characterization of ashes from co-combustion of refuse-derived fuel with coal, wood and bark in a fluidized bed

    SciTech Connect

    Zevenhoven, R.; Skrifvars, B.J.; Hupa, M.

    1998-12-31

    The technical and environmental feasibility of co-combustion of a recovered fuel (RF) prepared from combustible waste fractions (separated at the source), together with coal, peat, wood or wood-waste in thermal power/electricity generation has been studied in several R and D projects within Finland. The current work focuses on eventual changes in ash characteristics during co-combustion of RF with coal, wood or bark, which could lead to bed agglomeration, slagging, fouling and even corrosion in the boiler. Ashes were produced in a 15 kW bubbling fluidized bed (BFB) combustion reactor, the fly ash captured by the cyclone was further analyzed by XRF. The sintering tendency behavior of these ashes was investigated using a test procedure developed at Aabo Akademi University. Earlier, a screening program involved ashes from RF (from a waste separation scheme in Finland) co-combustion with peat, wood and bark, in which ash pellets were thermally treated in air. This showed significant sintering below 600 C as well as above 800 C for RF/wood and RF/bark, but not for RF/peat. This seemed to correlate with alkali chloride and sulfate concentrations in the ashes. The current work addresses a Danish refuse-derived fuel (RDF), co-combusted with bark, coal, bark+coal, wood, and wood+coal (eight tests). Ash pellets were thermally treated in nitrogen in order to avoid residual carbon combustion. The results obtained show no sintering tendencies below 600 C, significant changes in sintering are seen with pellets treated at 1,000 C. Ash from 100% RDF combustion does not sinter, 25% RDF co-combustion with wood and peat, respectively, gives an insignificant effect. The most severe sintering occurs during co-combustion of RDF with bark. Furthermore, it appears that the presence of a 25% coal fraction (on energy basis) seems to have a negative effect on all fuel blends. Analysis of the sintering results versus ash chemical composition shows that, in general, an increased level of

  10. Assessment of superheated steam drying of wood waste

    SciTech Connect

    Woods, B.G.; Nguyen, Y.; Bruce, S.

    1994-12-31

    A 5 MW co-generation facility using wood waste is described which will supply power to Ontario Hydro, steam to the sawmill for process heating, and hot water for district heating customers in the town. The use of superheated steam for drying the wood was investigated to determine the impact on boiler performance, the environmental impact and the economic feasibility. The main benefit with superheated steam drying is the reduction in VOC emissions. The capital cost is currently higher with superheated steam drying, but further investigation is warranted to determine if the cost reductions which could be achieved by manufacturing the major components in North America are sufficient to make the technology cost competitive.

  11. Kinetics of fluidized bed combustion of wood pellets

    SciTech Connect

    Leckner, B.; Hansson, K.M.; Tullin, C.; Borodulya, A.V.; Dikalenko, V.I.; Palchonok, G.I.

    1999-07-01

    Devolatilization and char combustion of a single wood pellet in a fluidized bed has been studied. The effect of operation parameters (bed temperature, bed particle size, oxygen concentration) and pellet characteristics has been investigated. A simplified analytical model of heat-transfer controlled pyrolysis has been developed to interpret the measured volatiles release time. The model predictions are in a good agreement with the experimental data, provided that the initial physical properties of the pellet are used. The model can be used to estimate the devolatilization times in other combustion systems. Kinetic parameters of char combustion are obtained, based on the measured burnout times and simple model considerations. The physical properties of wood pellets need further study.

  12. Incorporation of metal nanoparticles into wood substrate and methods

    DOEpatents

    Rector, Kirk D; Lucas, Marcel

    2015-11-04

    Metal nanoparticles were incorporated into wood. Ionic liquids were used to expand the wood cell wall structure for nanoparticle incorporation into the cell wall structure. Nanoparticles of elemental gold or silver were found to be effective surface enhanced Raman spectroscopy (SERS) imaging contrast or sensing agents. Nanoparticles of elemental iron were found to be efficient microwave absorbers and caused localized heating for disrupting the integrity of the lignocellulosic matrix. Controls suggest that the localized heating around the iron nanoparticles reduces losses of cellulose in the form of water, volatiles and CO.sub.2. The ionic liquid is needed during the incorporation process at room temperature. The use of small amounts of ionic liquid combined with the absence of an ionic liquid purification step and a lower energy and water use are expected to reduce costs in an up-scaled pretreatment process.

  13. ART ICHMI DOE Review Oct2015 Wood-1.pptx

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies- Instrumentation, Control, and Human- Machine Interface (ICHMI) Technology Area Overview Richard Wood Oak Ridge National Laboratory Presented during 2015 Nuclear Energy I&C Review U.S. Department of Energy - Webinar October 28, 2015 2 ICHMI Technology Area Focus is on Achieving Goals and Resolving Challenges for Advanced Reactors * DOE-NE R&D Objective #2 [Develop improvements in the affordability of new reactors...] establishes the primary goal for ART ICHMI research -

  14. Quality of Wood Pellets Produced in British Columbia for Export

    SciTech Connect

    J. S. Tumuluru; S. Sokhansanj; C. J. Lim; T. Bi; A. Lau; S. Melin; T. Sowlati; E. Oveisi

    2010-11-01

    Wood pellet production and its use for heat and power production are increasing worldwide. The quality of export pellets has to consistently meet certain specifications as stipulated by the larger buyers, such as power utilities or as specified by the standards used for the non-industrial bag market. No specific data is available regarding the quality of export pellets to Europe. To develop a set of baseline data, wood pellets were sampled at an export terminal in Vancouver, British Columbia, Canada. The sampling period was 18 months in 2007-2008 when pellets were transferred from storage bins to the ocean vessels. The sampling frequency was once every 1.5 to 2 months for a total of 9 loading/shipping events. The physical properties of the wood pellets measured were moisture content in the range of 3.5% to 6.5%, bulk density from 728 to 808 kg/m3, durability from 97% to 99%, fines content from 0.03% to 0.87%, calorific value as is from 17 to almost 18 MJ/kg, and ash content from 0.26% to 0.93%.The diameter and length were in the range of 6.4 to 6.5 mm and 14.0 to 19.0 mm, respectively. All of these values met the published non-industrial European grades (CEN) and the grades specified by the Pellet Fuel Institute for the United States for the bag market. The measured values for wood pellet properties were consistent except the ash content values decreased over the test period.

  15. QUALITY OF WOOD PELLETS PRODUCED IN BRITISH COLUMBIA FOR EXPORT

    SciTech Connect

    Tumuluru, J.S.; Sokhansanj, Shahabaddine; Lim, C. Jim; Bi, X.T.; Lau, A.K.; Melin, Staffan; Oveisi, E.; Sowlati, T.

    2010-11-01

    Wood pellet production and its use for heat and power production are increasing worldwide. The quality of export pellets has to consistently meet certain specifications as stipulated by the larger buyers, such as power utilities or as specified by the standards used for the non-industrial bag market. No specific data is available regarding the quality of export pellets to Europe. To develop a set of baseline data, wood pellets were sampled at an export terminal in Vancouver, British Columbia, Canada. The sampling period was 18 months in 2007-2008 when pellets were transferred from storage bins to the ocean vessels. The sampling frequency was once every 1.5 to 2 months for a total of 9 loading/shipping events. The physical properties of the wood pellets measured were moisture content in the range of 3.5% to 6.5%, bulk density from 728 to 808 kg/m3, durability from 97% to 99%, fines content from 0.03% to 0.87%, calorific value as is from 17 to almost 18 MJ/kg, and ash content from 0.26% to 0.93%.The diameter and length were in the range of 6.4 to 6.5 mm and 14.0 to 19.0 mm, respectively. All of these values met the published non-industrial European grades (CEN) and the grades specified by the Pellet Fuel Institute for the United States for the bag market. The measured values for wood pellet properties were consistent except the ash content values decreased over the test period.

  16. Conversion of wood residues to diesel fuel

    SciTech Connect

    Kuester, J.L.

    1981-01-01

    The basic approach is indirect liquefaction, i.e., thermal gasification followed by catalytic liquefaction. The indirect approach results in separation of the oxygen in the biomass feedstock, i.e., oxygenated compounds do not appear in the liquid hydrocarbon fuel product. The general conversion scheme is shown. The process is capable of accepting a wide variety of feedstocks. Potential products include medium quality gas, normal propanol, paraffinic fuel and/or high octane gasoline. A flow diagram of the continuous laboratory unit is shown. A fluidized bed pyrolysis system is used for gasification. Capacity is about 10 lbs/h of feedstock. The pyrolyzer can be fluidized with recycle pyrolysis gas, steam or recycle liquefaction system off gas or some combination thereof. Tars are removed in a wet scrubber. Unseparated pyrolysis gases are utilized as feed to a modified Fischer-Tropsch reactor. The liquid condensate from the reactor consists of a normal propanol-water phase and a paraffinic hydrocarbon phase. The reactor can be operated to optimize for either product. If a high octane gasoline is desired, the paraffinic fuel is passed through a conventional catalytic reformer. The normal propanol could be used as a fuel extender if blended with the hydrocarbon fuel products. Off gases from the downstream reactors are of high quality due to the accumulation of low molecular weight paraffins.

  17. GENERAL ASSIGNMENT

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    GENERAL ASSIGNMENT KNOW ALL MEN BY THESE PRESENTS, that ___________________________________, a corporation organized and existing under the laws of the State of ________________________, with its principal place of business at ___________________________________, ___________________________________ has been engaged in performing work under Award Number DE-__________________________with the UNITED STATES OF AMERICA (hereinafter called the "Government"), represented by the UNITED STATES

  18. Mechanics of compression drying solid wood cubes and chip mats

    SciTech Connect

    Haygreen, J.G.

    1982-10-01

    Wood cubes and chip mats were compressed in a cell under ram face pressures to 13,000 psi. The amount of water removed was determined for a range of species of various specific gravities and at several green moisture contents (MCs). The time dependence of the process was also studied. The purpose of this work was to describe the mechanics of compression drying which must be considered in designing commercial equipment. Green MC of wood chip mats was reduced to 45 to 50 percent MC (31% to 33% MC, wet basis) at pressures of 13,000 psi. At low pressures of 1,000 to 2,000 psi, moisture was reduced to 60 to 75 percent MC (38% to 43% MC, wet basis). There was a significantly greater moisture reduction at these low pressures if the pressure is maintained for up to 2 minutes rather than releasing it immediately once the target pressure is obtained. Water can be removed from high density species but pressures required are higher by a factor of 2 to 3. The chip mat is reduced to about one-sixth of its original volume at 2,000 psi and one-seventh at 6,000 psi. When pressing cubes of high green MC, about 7,000 foot-pounds of work (equivalent to 9 Btu) applied to the wood will remove up to 1 pound of water. (Refs. 9).

  19. Particulate matter emissions from combustion of wood in district heating applications

    SciTech Connect

    Ghafghazi, S.; Sowlati, T.; Sokhansanj, Shahabaddine; Bi, X.T.; Melin, Staffan

    2011-01-01

    The utilization of wood biomass to generate district heat and power in communities that have access to this energy source is increasing. In this paper the effect of wood fuel properties, combustion condition, and flue gas cleaning system on variation in the amount and formation of particles in the flue gas of typical district heating wood boilers are discussed based on the literature survey. Direct measurements of particulate matter (PM) emissions from wood boilers with district heating applications are reviewed and presented. Finally, recommendations are given regarding the selection of wood fuel, combustion system condition, and flue gas cleaning system in district heating systems in order to meet stringent air quality standards. It is concluded that utilization of high quality wood fuel, such as wood pellets produced from natural, uncontaminated stem wood, would generate the least PM emissions compared to other wood fuel types. Particulate matter emissions from grate burners equipped with electrostatic precipitators when using wood pellets can be well below stringent regulatory emission limit such as particulate emission limit of Metro Vancouver, Canada.

  20. Chicago Office 9800 South Cass Avenue

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Office of Science Chicago Office 9800 South Cass Avenue Argonne, Illinois 60439 *tf N R OMNP MEMORANDUM FOR GREGORY H. WOODS GENERAL COUNSEL GC-1FORS FROM: SUBJECT: ROXANNE E. ...

  1. Ames Site Ofice 9800 South Cass Avenue

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    January 15, 2013 MEMORANDUM FOR GREGORY H. WOODS, GENERAL COUNSEL OFFICE OF THE ... Eric Dallmann, the Ames Site Office ES&H Coordinator, at 630-252-3340, or our NEPA ...

  2. Wood-fuel use in Papua New Guinea: an assessment of industrial combustion equipment

    SciTech Connect

    Mendis, M.S.

    1980-11-01

    This report presents the results of an engineering and economic assessment of new and retrofit industrial combustion equipment for wood-fuel use in Papua New Guinea. Existing industrial combustion equipment and practices in Papua New Guinea are appraised. Potential industrial wood-fuel systems that utilize wood, wood wastes, charcoal and pyrolytic oils and which are particularly applicable to Papua New Guinea are identified. An economic assessment of wood-fuel systems is conducted for eleven case studies which are representative of a cross-section of Papua New Guinea industry. Conclusions and recommendations are presented to aid both government and industry in Papua New Guinea in fostering the development of appropriate wood-fuel technologies and thereby help displace the consumption of imported petroleum.

  3. Method for predicting dry mechanical properties from wet wood and standing trees

    DOEpatents

    Meglen, Robert R.; Kelley, Stephen S.

    2003-08-12

    A method for determining the dry mechanical strength for a green wood comprising: illuminating a surface of the wood to be determined with light between 350-2,500 nm, the wood having a green moisture content; analyzing the surface using a spectrometric method, the method generating a first spectral data, and using a multivariate analysis to predict the dry mechanical strength of green wood when dry by comparing the first spectral data with a calibration model, the calibration model comprising a second spectrometric method of spectral data obtained from a reference wood having a green moisture content, the second spectral data correlated with a known mechanical strength analytical result obtained from a reference wood when dried and having a dry moisture content.

  4. Particulate emissions from residential wood combustion: Final report: Norteast regional Biomass Program

    SciTech Connect

    Not Available

    1987-01-01

    The objective of this study was to provide a resource document for the Northeastern states when pursuing the analysis of localized problems resulting from residential wood combustion. Specific tasks performed include assigning emission rates for total suspended particulates (TSP) and benzo(a)pyrene (BaP) from wood burning stoves, estimating the impact on ambient air quality from residential wood combustion and elucidating the policy options available to Northeastern states in their effort to limit any detrimental effects resulting from residential wood combustion. Ancillary tasks included providing a comprehensive review on the relevant health effects, indoor air pollution and toxic air pollutant studies. 77 refs., 11 figs., 25 tabs.

  5. Genomics of wood-degrading fungi (Journal Article) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Details In-Document Search This content will become publicly available on November 1, 2015 Title: Genomics of wood-degrading fungi Authors: Ohm, Robin A. ; Riley, Robert ;...

  6. Water Sampling At Hot Lake Area (Wood, 2002) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Hot Lake Area (Wood, 2002) Exploration Activity Details Location Hot Lake...

  7. Water Sampling At Belknap-Foley-Bigelow Hot Springs Area (Wood...

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Belknap-Foley-Bigelow Hot Springs Area (Wood, 2002) Exploration Activity...

  8. Techno-economic analysis of wood biomass boilers for the greenhouse industry

    SciTech Connect

    Chau, J.; Sowlati, T.; Sokhansanj, Shahabaddine; Bi, X.T.; Preto, F.; Melin, Staffan

    2009-01-01

    The objective of this study is to perform a techno-economic analysis on a typical wood pellet and wood residue boiler for generation of heat to an average-sized greenhouse in British Columbia. The variables analyzed included greenhouse size and structure, boiler efficiency, fuel types, and source of carbon dioxide (CO2) for crop fertilization. The net present value (NPV) show that installing a wood pellet or a wood residue boiler to provide 40% of the annual heat demand is more economical than using a natural gas boiler to provide all the heat at a discount rate of 10%. For an assumed lifespan of 25 years, a wood pellet boiler system could generate NPV of C$259,311 without electrostatic precipitator (ESP) and C$74,695 with ESP, respectively. While, installing a wood residue boiler with or without an ESP could provide NPV of C$919,922 or C$1,104,538, respectively. Using a wood biomass boiler could also eliminate over 3000 tonne CO2 equivalents of greenhouse gases annually. Wood biomass combustion generates more particulate matters than natural gas combustion. However, an advanced emission control system could significantly reduce particulate matters emission from wood biomass combustion which would bring the particulate emission to a relatively similar level as for natural gas.

  9. New Methods for Investigating Wood Formation | U.S. DOE Office...

    Office of Science (SC)

    analyses of the evolution of genetic regulation and modifications relating to or ... transcription factor-DNA interactions associated with the regulation of wood formation. ...

  10. Environmental characterization studies of a high-throughput wood gasifier

    SciTech Connect

    Chang, H.; Niemann, R.C.; Wilzbach, K.E.; Paisley, M.

    1983-01-01

    Potential environmental effects associated with thermochemical biomass gasification have been studied by Argonne National Laboratory in cooperation with Battelle Columbus Laboratories (BCL). A series of samples from the process research unit of an indirectly heated, high-throughput wood gasifier operated by BCL has been analyzed for potentially toxic organic compounds and trace elements. The results indicate that, under the test-run conditions, the gasification of both pine and hardwood is accompanied by the formation of some oil, the heavier fraction of which gives a positive response in the Ames assay for mutagenicity and contains numerous phenols and polycyclic aromatic hydrocarbons, including some carcinogens. The implications of these observations are discussed.

  11. Contacts for Field Counsel Offices | Department of Energy

    Energy Saver

    Justin Oliver, General Attorney 208-526-0376 Matt Smith, General Attorney 208-526-7109 Erin Walkowiak, General Attorney 208-526-1618 Amy Smith, Paralegal 208-526-4223 Judi ...

  12. Hygrothermal Performance of West Coast Wood Deck Roofing System

    SciTech Connect

    Pallin, Simon B; Kehrer, Manfred; Desjarlais, Andre Omer

    2014-02-01

    Simulations of roofing assemblies are necessary in order to understand and adequately predict actual the hygrothermal performance. At the request of GAF, simulations have been setup to verify the difference in performance between white and black roofing membrane colors in relation to critical moisture accumulation for traditional low slope wood deck roofing systems typically deployed in various western U.S. Climate Zones. The performance of these roof assemblies has been simulated in the hygrothermal calculation tool of WUFI, from which the result was evaluated based on a defined criterion for moisture safety. The criterion was defined as the maximum accepted water content for wood materials and the highest acceptable moisture accumulation rate in relation to the risk of rot. Based on the criterion, the roof assemblies were certified as being either safe, risky or assumed to fail. The roof assemblies were simulated in different western climates, with varying insulation thicknesses, two different types of wooden decking, applied with varying interior moisture load and with either a high or low solar absorptivity at the roof surface (black or white surface color). The results show that the performance of the studied roof assemblies differs with regard to all of the varying parameters, especially the climate and the indoor moisture load.

  13. THE ROLE OF DEAD WOOD IN MAINTAINING ARTHROPOD DIVERSITY ON THE FOREST FLOOR.

    SciTech Connect

    Hanula, James L.; Horn, Scott; Wade, Dale D.

    2006-08-01

    AbstractDead wood is a major component of forests and contributes to overall diversity, primarily by supporting insects that feed directly on or in it. Further, a variety of organisms benefit by feeding on those insects. What is not well known is how or whether dead wood influences the composition of the arthropod community that is not solely dependent on it as a food resource, or whether woody debris influences prey available to generalist predators. One group likely to be affected by dead wood is ground-dwelling arthropods. We studied the effect of adding large dead wood to unburned and frequently burned pine stands to determine if dead wood was used more when the litter and understory plant community are removed. We also studied the effect of annual removal of dead wood from large (10-ha) plots over a 5-year period on ground-dwelling arthropods. In related studies, we examined the relationships among an endangered woodpecker that forages for prey on live trees, its prey, and dead wood in the forest. The results of these and other studies show that dead wood can influence the abundance and diversity of the ground-dwelling arthropod community and of prey available to generalist predators not foraging directly on dead trees.

  14. Demonstration of wood/coal co-firing in a spreader stoker

    SciTech Connect

    Cobb, J.T. Jr.; Elder, W.W.; Geiger, G.E.; Campus, N.J.; Miller, W.F.; Freeman, M.C.; McCreery, L.R.

    1999-07-01

    The Forest Service of the U.S. Department of Agriculture is sponsoring a series of demonstrations of wood/coal co-firing in stoker boilers. The first demonstration was conducted in 1997 in an industrial traveling-grate stoker boiler and the second in May 1999 in a spreader stoker boiler operated by the National Institute of Occupational Safety and Health (NIOSH) at the Bruceton Research Laboratory. The principal wood used in both demonstrations was tub-ground broken pallets. In the first phase of the NIOSH demonstration, four five-ton loads of wood/coal mixtures, varying from 3% to 12% wood (by Btu content), were combusted. The second phase of this demonstration was a 50-hour test using a 10% wood/coal blend delivered in two 20-ton loads. It has been concluded from both demonstrations that (1) a 10% wood/coal blend burns acceptably in the boiler, but (2) tub-ground urban wood is unacceptably difficult to feed through the grill above the delivery pit and through the spreader stokers. A method is being sought to acquire urban waste wood, having a more chip-like nature, to use in further testing and for commercialization.

  15. Relationships between dead wood and arthropods in the Southeastern United States.

    SciTech Connect

    Ulyshen, Michael, Darragh

    2009-05-01

    The importance of dead wood to maintaining forest diversity is now widely recognized. However, the habitat associations and sensitivities of many species associated with dead wood remain unknown, making it difficult to develop conservation plans for managed forests. The purpose of this research, conducted on the upper coastal plain of South Carolina, was to better understand the relationships between dead wood and arthropods in the southeastern United States. In a comparison of forest types, more beetle species emerged from logs collected in upland pine-dominated stands than in bottomland hardwood forests. This difference was most pronounced for Quercus nigra L., a species of tree uncommon in upland forests. In a comparison of wood postures, more beetle species emerged from logs than from snags, but a number of species appear to be dependent on snags including several canopy specialists. In a study of saproxylic beetle succession, species richness peaked within the first year of death and declined steadily thereafter. However, a number of species appear to be dependent on highly decayed logs, underscoring the importance of protecting wood at all stages of decay. In a study comparing litter-dwelling arthropod abundance at different distances from dead wood, arthropods were more abundant near dead wood than away from it. In another study, grounddwelling arthropods and saproxylic beetles were little affected by large-scale manipulations of dead wood in upland pine-dominated forests, possibly due to the suitability of the forests surrounding the plots.

  16. URBAN WOOD/COAL CO-FIRING IN THE NIOSH BOILERPLANT

    SciTech Connect

    James T. Cobb, Jr.; Gene E. Geiger; William W. Elder III; Thomas Stickle; Jun Wang; Hongming Li; William P. Barry

    2002-06-13

    During the third quarter, the experimental portion of the project was carried out. Three one-day tests using wood/coal blends of 33% wood by volume (both construction wood and demolition wood) were conducted at the NIOSH Boiler Plant (NBP). Blends using hammer-milled wood were operationally successful and can form the basis of Phase II. Emissions of SO{sub 2} and NOx decreased and that of CO increased when compared with combusting coal alone. Mercury emissions were measured and the mathematical modeling of mercury speciation reactions continued, yielding many interesting results. Material and energy balances for the test periods at the NBP, as well as at the Bellefield Boiler Plant, were prepared. Steps were taken to remove severe constraints from the Pennsylvania Switchgrass Energy and Conservation Project and to organize the supplying of landfill gas to the Bruceton federal complex. Two presentations were made to meetings of the Electric Power Research Institute and the National Energy Technology Laboratory.

  17. Commercial Demonstration of Wood Recovery, Recycling, and Value Adding Technologies

    SciTech Connect

    Auburn Machinery, Inc.

    2004-07-15

    This commercial demonstration project demonstrated the technical feasibility of converting low-value, underutilized and waste stream solid wood fiber material into higher valued products. With a growing need to increase product/production yield and reduce waste in most sawmills, few recovery operations and practically no data existed to support the viability of recovery operations. Prior to our efforts, most all in the forest products industry believed that recovery was difficult, extremely labor intensive, not cost effective, and that recovered products had low value and were difficult to sell. This project provided an opportunity for many within the industry to see through demonstration that converting waste stream material into higher valued products does in fact offer a solution. Our work, supported by the U.S. Department of Energy, throughout the project aimed to demonstrate a reasonable approach to reducing the millions of recoverable solid wood fiber tons that are annually treated as and converted into low value chips, mulch and fuel. Consequently sawmills continue to suffer from reduced availability of forest resources, higher raw material costs, growing waste disposal problems, increased global competition, and more pressure to operate in an Environmentally Friendly manner. It is our belief (based upon the experience of this project) that the successful mainstreaming of the recovery concept would assist in alleviating this burden as well as provide for a realistically achievable economic benefit to those who would seriously pursue the concept and tap into the rapidly growing ''GREEN'' building marketplace. Ultimately, with participation and aggressive pursuit of the recovery concept, the public would benefit in that: (1) Landfill/disposal waste volume could be reduced adding greater life to existing municipal landfill sites thereby minimizing the need to prematurely license and open added facilities. Also, there would be a cost avoidance benefit associated

  18. Health assessment for Coleman Evans Wood Preserving Site, Whitehouse, Florida, Region 4. CERCLIS No. FLD991279894. Final report

    SciTech Connect

    Not Available

    1989-08-21

    The Coleman Evans Wood Preserving Site is an 11-acre National Priorities List site located in Whitehouse, Duval County, Florida, approximately 8 miles west of Jacksonville. The site is an active wood treatment facility which began operating in 1954 and uses fuel oil and pentachlorophenol (PCP) in the treatment process. The contamination is generally within the upper 10 feet of the surface with the highest concentrations coinciding with the water table. However, PCP has been detected to depths of 35 feet in the landfill area. Off-site surface soil, water, and sediments are also contaminated with PCP. The contamination of the surface water and sediment extends several hundred feet along a drainage ditch which runs through a residential area. The surficial soil contamination appears consistent with surface water runoff patterns. Groundwater analyses indicated the PCP contamination is limited to the surficial aquifer. The site is of potential public health concern because of the migration of PCP off-site by surface water runoff and the potential for contaminating the aquifer used for domestic purposes by area residents.

  19. Environmental-performance research priorities: Wood products. Final report

    SciTech Connect

    1998-01-15

    This report describes a research plan to establish environmental, energy, and economic performance measures for renewable building materials, and to identify management and technology alternatives to improve environmental performance in a cost-effective manner. The research plan is designed to: (1) collect environmental and economic data on all life-cycle stages of the materials, (2) ensure that the data follows consistent definitions and collection procedures, and (3) develop analytical procedures for life-cycle analysis to address environmental performance questions. The research will be subdivided into a number of individual project modules. The five processing stages of wood used to organize the research plan are: (1) resource management and harvesting; (2) processing; (3) design and construction of structures; (4) use, maintenance, and disposal; and (5) waste recycling. Individual research module descriptions are provided in the report, as well as assessment techniques, research standards and protocol, and research management. 13 refs., 5 figs., 3 tabs.

  20. Ecological objectives can be achieved with wood-derived bioenergy

    SciTech Connect

    Dale, Virginia H.; Kline, Keith L.; Marland, Gregg; Miner, Reid A.

    2015-08-01

    Renewable, biomass-based energy options can reduce the climate impacts of fossil fuels. However, calculating the effects of wood-derived bioenergy on greenhouse gases (GHGs), and thus on climate, is complicated (Miner et al. 2015). To clarify concerns and options about bioenergy, in November 2014, the US Environmental Protection Agency (EPA) produced a second draft of its Framework for Assessing Biogenic CO2 Emissions fromStationary Sources (http://1.usa.gov/1dikgHq), which considers the latest scientific information and input from stakeholders. Furthermore, the EPA is expected to make decisions soon about the use of woody biomass under the Clean Power Plan, which sets targets for carbon pollution from power plants.

  1. Ecological objectives can be achieved with wood-derived bioenergy

    DOE PAGES [OSTI]

    Dale, Virginia H.; Kline, Keith L.; Marland, Gregg; Miner, Reid A.

    2015-08-01

    Renewable, biomass-based energy options can reduce the climate impacts of fossil fuels. However, calculating the effects of wood-derived bioenergy on greenhouse gases (GHGs), and thus on climate, is complicated (Miner et al. 2015). To clarify concerns and options about bioenergy, in November 2014, the US Environmental Protection Agency (EPA) produced a second draft of its Framework for Assessing Biogenic CO2 Emissions fromStationary Sources (http://1.usa.gov/1dikgHq), which considers the latest scientific information and input from stakeholders. Furthermore, the EPA is expected to make decisions soon about the use of woody biomass under the Clean Power Plan, which sets targets for carbon pollutionmore » from power plants.« less

  2. Ecological objectives can be achieved with wood-derived bioenergy

    SciTech Connect

    Dale, Virginia H.; Kline, Keith L.; Marland, Gregg; Miner, Reid A.

    2015-08-01

    Renewable, biomass-based energy options can reduce the climate impacts of fossil fuels. However, calculating the effects of wood-derived bioenergy on greenhouse gases (GHGs), and thus on climate, is complicated (Miner et al. 2015). To clarify concerns and options about bioenergy, in November 2014, the US Environmental Protection Agency (EPA) produced a second draft of its Framework for Assessing Biogenic CO2 Emissions fromStationary Sources (http://1.usa.gov/1dikgHq), which considers the latest scientific information and input from stakeholders. In addition, the EPA is expected to make decisions soon about the use of woody biomass under the Clean Power Plan, which sets targets for carbon pollution from power plants.

  3. Forest and wood products role in carbon sequestration

    SciTech Connect

    Sampson, R.N.

    1997-12-31

    An evaluation of the use of U.S. forests and forest products for carbon emission mitigation is presented. The current role of forests in carbon sequestration is described in terms of regional differences and forest management techniques. The potential for increasing carbon storage by converting marginal crop and pasture land, increasing timberland growth, reducing wildfire losses, and changing timber harvest methods is examined. Post-harvest carbon flows, environmental impacts of wood products, biomass energy crops, and increased use of energy-conserving trees are reviewed for their potential in reducing or offsetting carbon emissions. It is estimated that these techniques could offset 20 to 40 percent of the carbon emitted annually in the U.S. 39 refs., 5 tabs.

  4. Urban Wood-Based Bio-Energy Systems in Seattle

    SciTech Connect

    Stan Gent, Seattle Steam Company

    2010-10-25

    Seattle Steam Company provides thermal energy service (steam) to the majority of buildings and facilities in downtown Seattle, including major hospitals (Swedish and Virginia Mason) and The Northwest (Level I) Regional Trauma Center. Seattle Steam has been heating downtown businesses for 117 years, with an average length of service to its customers of 40 years. In 2008 and 2009 Seattle Steam developed a biomass-fueled renewable energy (bio-energy) system to replace one of its gas-fired boilers that will reduce greenhouse gases, pollutants and the amount of waste sent to landfills. This work in this sub-project included several distinct tasks associated with the biomass project development as follows: a. Engineering and Architecture: Engineering focused on development of system control strategies, development of manuals for start up and commissioning. b. Training: The project developer will train its current operating staff to operate equipment and facilities. c. Flue Gas Clean-Up Equipment Concept Design: The concept development of acid gas emissions control system strategies associated with the supply wood to the project. d. Fuel Supply Management Plan: Development of plans and specifications for the supply of wood. It will include potential fuel sampling analysis and development of contracts for delivery and management of fuel suppliers and handlers. e. Integrated Fuel Management System Development: Seattle Steam requires a biomass Fuel Management System to track and manage the delivery, testing, processing and invoicing of delivered fuel. This application will be web-based and accessed from a password-protected URL, restricting data access and privileges by user-level.

  5. Potential role of lignin in tomorrow's wood utilization technologies

    SciTech Connect

    Glasser, W.G.

    1981-03-01

    Low-grade timber supplies and wood processing residues are presently converted into paper products, used for fuel, or remain totally unused. Competition for this resource will continue to mount, particularly when manufacturers of chemicals and liquid fuels enter the market with new technologies now under development. The type of technology that concentrates on depolymerization of carbohydrates will generate large quantities of lignin-rich residues. The potential of these lignins to contribute to the economic feasibility of new chemical wood process technologies may involve degradative depolymerization to phenols and benzene, or polymer conversion into a wide variety of dispersants, binders, reinforcing and antioxidizing agents, etc. Where lignin's fuel value lies around 3 to 4 cents/lb. (fall of 1979), its raw material value for phenol is reported to be almost 5 cents/lb., and the value of the polymeric materials is estimated to be between 6 and 20 cents/lb. At the lower end of this range of raw material values are ligninsulfonates, which contribute nearly 98 percent to the approximately 1.5 billion lb./yr. U.S. market for lignin products. Kraft lignins are located at the opposite end of this range. Novel bioconversion-type lignins are expected to be more similar in structure and properties to kraft than to sulfite lignins. Whereas application of the dispersant properties of ligninsulfonates in tertiary oil recovery operations is expected to constitute the most significant use of lignin in terms of volume, adhesive and resin applications hold the greatest promise in terms of value. Both utilization schemes seem to require pretreatments in the form of either polymeric fractionation or chemical modification. Potential savings from the use of polymeric lignins in material systems are great.

  6. The Pennsylvanian and Permian Oquirrh-Wood River basin

    SciTech Connect

    Geslin, J.K. . Dept. of Earth and Planetary Sciences)

    1993-04-01

    Strata of the Middle Pennsylvanian to Lower Permian Oquirrh-Wood River Basin (OWRB) lie unconformably above the Antler orogenic belt and flysch trough/starved basin in NW Utah, NE Nevada, and SC Idaho. Strata of the basin, now separated geographically by the Neogene Snake River Plain, show similar subsidence histories, identical mixed carbonate-siliciclastic sedimentary fill, and identical chert pebble conglomerate beds supplied by one or more DesMoinesian uplifts containing Lower Paleozoic strata. This conglomerate, of the lower Sun Valley Group, Snaky Canyon Formation, and parts of the Oquirrh Formation, was reworked progressively southward, to at least the Idaho-Utah border. It is present in strata as young as Virgilian. Virgilian to Leonardian rocks are ubiquitously fine-grained mixed carbonate-siliciclastic turbidites. These rocks contain cratonal, well-sorbed subarkosic and quartzose sand and silt in part derived from the Canadian Shield. This siliciclastic fraction is intimately mixed with arenaceous micritized skeletal material and peloids derived from an eastern carbonate platform represented by the Snaky Canyon Formation in east-central Idaho, an eastern facies of the Eagle Creek Member, Wood River Formation in the Boulder Mountains, and the Oquirrh Formation in the Deep Creek Mountains. Subsidence of the OWRB may have been caused by two phases (DesMoinesian and Wolfcampian to Leonardian) of crustal loading by continental margin tectonism to the west. An elevated rim separated the OWRB from coeval volcanogenic basins to the west. Earlier, Antler-age structures may have been reactivated. A new pulse of tectonism occurred in Leonardian to Guadalupian time as in most places carbonatic and phosphatic strata of the Leonardian to Guadalupian Park City and Phosphoria Formation overlie OWRB strata, with different geographic arrangement of basinal, slope, and shelf depocenters.

  7. The effects of storage on the net calorific value of wood pellets

    DOE PAGES [OSTI]

    Lee, Jun Sian; Sokhansanj, S.; Lau, A. K.; Lim, C. J.; Bi, X. T.; Basset, Vaughan; Yazdanpanah, F.; Melin, S.

    2015-06-30

    The wood pellet export from Canada to Europe has been increasing steadily in recent years (roughly 1.8 million ton in 2013). Due to distances involved, wood pellets remain in transit and storage for months before their final consumption. The net calorific value determines the price of wood pellet purchase in Europe. There have been concerns about the changes of net calorific values over time. In this study, the effects of storage time, storage configuration, storage temperature, and wood pellet quality on the net calorific value of wood pellets for a period of 6 months were investigated. Storage configurations were openmore » or closed and storage temperatures were 25 °C, 35 °C and 45 °C. Two types of wood pellets used were whitewood and mixed. The results in closed storage indicated that storage time had a positive effect on the net calorific value where the net calorific value increased by 1% to 2% over the storage period. In open storage, the moisture content had the most significant impact on the net calorific value. The net calorific values of the two types of wood pellets were found to be significantly different at p < 0.001. A multivariable linear regression and analyses of variance performed verified the graphical results. Lastly, the authors postulated that the higher energy potential compounds, such as aldehyde and ketone, produced during pellet storage, caused the increase in net calorific values.« less

  8. The effects of storage on the net calorific value of wood pellets

    SciTech Connect

    Lee, Jun Sian; Sokhansanj, S.; Lau, A. K.; Lim, C. J.; Bi, X. T.; Basset, Vaughan; Yazdanpanah, F.; Melin, S.

    2015-06-30

    The wood pellet export from Canada to Europe has been increasing steadily in recent years (roughly 1.8 million ton in 2013). Due to distances involved, wood pellets remain in transit and storage for months before their final consumption. The net calorific value determines the price of wood pellet purchase in Europe. There have been concerns about the changes of net calorific values over time. In this study, the effects of storage time, storage configuration, storage temperature, and wood pellet quality on the net calorific value of wood pellets for a period of 6 months were investigated. Storage configurations were open or closed and storage temperatures were 25 °C, 35 °C and 45 °C. Two types of wood pellets used were whitewood and mixed. The results in closed storage indicated that storage time had a positive effect on the net calorific value where the net calorific value increased by 1% to 2% over the storage period. In open storage, the moisture content had the most significant impact on the net calorific value. The net calorific values of the two types of wood pellets were found to be significantly different at p < 0.001. A multivariable linear regression and analyses of variance performed verified the graphical results. Lastly, the authors postulated that the higher energy potential compounds, such as aldehyde and ketone, produced during pellet storage, caused the increase in net calorific values.

  9. Superfund Record of Decision (EPA region 4): Coleman Evans Wood Preserving Co. , Jacksonville, Duval County, Florida, September 1986. Final report

    SciTech Connect

    Not Available

    1986-09-25

    The Coleman Evans Wood Preserving Company site is an active 11-acre wood-preserving facility located in the town of Whitehouse, Duval County, Florida. The site consists of two distinct areas: the western portion, which comprises the wood treating facility; and the eastern portion, which consists of a landfill area which has been used for the disposal of wood-chip and other wastes. Coleman Evans has produced wood products impregnated with PCP. Site investigations confirm soil and ground-water contamination, with PCP the primary contaminant of concern.

  10. Feasibility study of wood-fired cogeneration at a Wood Products Industrial Park, Belington, WV. Phase II

    SciTech Connect

    Vasenda, S.K.; Hassler, C.C.

    1992-06-01

    Customarily, electricity is generated in a utility power plant while thermal energy is generated in a heating/cooling plant; the electricity produced at the power plant is transmitted to the heating/cooling plant to power equipments. These two separate systems waste vast amounts of heat and result in individual efficiencies of about 35%. Cogeneration is the sequential production of power (electrical or mechanical) and thermal energy (process steam, hot/chilled water) from a single power source; the reject heat of one process issued as input into the subsequent process. Cogeneration increases the efficiency of these stand-alone systems by producing these two products sequentially at one location using a small additional amount of fuel, rendering the system efficiency greater than 70%. This report discusses cogeneration technologies as applied to wood fuel fired system.

  11. Mass transfer coefficients developed from the air gasification of wood pellets

    SciTech Connect

    Botts, J.W.

    1998-07-01

    A convertible updraft/downdraft, fixed-bed gasifier was used in the gasification of 3/8-inch diameter wood pellets. The test data was used to develop mass transfer coefficients and describe the gasification process for each gasifier configuration. The results show that the production of the principal combustion gases, i.e., hydrogen (H{sub c}), carbon monozide (CO), and methane (CH{sub 4}), varies directly as to their mass transfer coefficient: H{sub 2}, CO, and CH{sub 4} = k h{sub DA}. Factoring the Reynolds (Re{sub d}) and Schmidt (Sc) numbers with the influence of the noncombustible gases, i.e., nitrogen (N{sub 2}), oxygen (O{sub 2}), and carbon dioxide (CO{sub 2}), is used to define the mass transfer coefficients. The general form describing this joint variation is: H{sub 2}, CO, and CH{sub 4} = kx (the effect of the noncombustible gases) x Re x Sc where Re = Reynolds number and Sc = Schmidt number. The developments of these mass transfer coefficients are shown for updraft and downdraft gasification.

  12. Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Program

    Energy.gov [DOE]

    The New Hampshire Public Utilities Commission (PUC) offers rebates of 30% of the installed cost of qualifying new residential bulk-fed, wood-pellet central heating boilers or furnaces. The maximum...

  13. Thermal Impact of Fasteners in High-Performance Wood-Framed Walls

    SciTech Connect

    Dane Christensen

    2011-01-01

    This paper discusses high-performance wood-framed walls that use much less than 40% of the energy consumed by similar homes built to minimum code, and evaluates the thermal impact of fasteners used to construct these walls.

  14. Genomics of wood-degrading fungi Ohm, Robin A.; Riley, Robert...

    Office of Scientific and Technical Information (OSTI)

    Genomics of wood-degrading fungi Ohm, Robin A.; Riley, Robert; Salamov, Asaf; Min, Byoungnam; Choi, In-Geol; Grigoriev, Igor V. Not Available Elsevier None USDOE United States...

  15. Title 43 CFR 3620 Free Use of Petrified Wood | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    620 Free Use of Petrified Wood Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Federal RegulationFederal Regulation: Title 43 CFR 3620 Free Use...

  16. SEP Success Story: How Much Wood Would a North Country School Chip

    Energy.gov [DOE]

    The North Country School has dedicated itself to finding renewable sources of fuel to heat the approximately 85,000 square feet of classroom and office space on campus. After investigating many options, installing a wood chip boiler emerged as the most environmental and economical choice, due in large part to the availability of wood chips that are a by-product of the campus’ forest woodlot. Learn more.

  17. Evolution of novel wood decay mechanisms in Agaricales revealed by the

    Office of Scientific and Technical Information (OSTI)

    genome sequences of Fistulina hepatica and Cylindrobasidium torrendii (Journal Article) | DOE PAGES Publisher's Accepted Manuscript: Evolution of novel wood decay mechanisms in Agaricales revealed by the genome sequences of Fistulina hepatica and Cylindrobasidium torrendii Title: Evolution of novel wood decay mechanisms in Agaricales revealed by the genome sequences of Fistulina hepatica and Cylindrobasidium torrendii Authors: Floudas, Dimitrios ; Held, Benjamin W. ; Riley, Robert ; Nagy,

  18. Genome sequence of a white rot fungus Schizopora paradoxa KUC8140 for wood

    Office of Scientific and Technical Information (OSTI)

    decay and mycoremediation (Journal Article) | DOE PAGES Genome sequence of a white rot fungus Schizopora paradoxa KUC8140 for wood decay and mycoremediation Title: Genome sequence of a white rot fungus Schizopora paradoxa KUC8140 for wood decay and mycoremediation Authors: Min, Byoungnam ; Park, Hongjae ; Jang, Yeongseon ; Kim, Jae-Jin ; Kim, Kyoung Heon ; Pangilinan, Jasmyn ; Lipzen, Anna ; Riley, Robert ; Grigoriev, Igor V. ; Spatafora, Joseph W. ; Choi, In-Geol Publication Date:

  19. A = 5 General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    5 General Tables The General Table for 5H is subdivided into the following categories: Cluster Model Hypernuclei Model Calculations Photodisintegration Pions The General Table for...

  20. Continuous-flow wood chip reactor for biodegradation of 2,4-DCP

    SciTech Connect

    Yum, K.J.; Peirce, J.J.

    1998-02-01

    Chlorinated phenols are by-products of chlorine bleaching in numerous industries including pulp and paper mills and can be emitted from a variety of incineration processes. This research investigates the ability and efficiency of continuous-flow wood chip reactors seeded with a white-rot fungus to degrade 2,4-dichlorophenol (2,4-DCP) using wood chips as a carbon source. When 2,4-DCP was the only substrate (nonglucose treatment conditions), the wood chip reactor system had a high degradation efficiency and operated continuously without excessive fungal biomass buildup on the wood chips. In the presence of added glucose, a clogging problem and an effluent contamination problem of fungal cells are found during the reactor operating period. In addition, 2,4-DCP is degraded effectively both under low-nitrogen as well as high-nitrogen treatment conditions. The 2,4-DCP is degraded to a greater extent with small-size wood chips and hardwood chips as a carbon source. The results of this research demonstrate a potential application of wood chip reactor systems for the treatment of contaminated water while expanding the use of wasted forest products.

  1. Permeability of wood pellets in the presence of fines

    SciTech Connect

    Yazdanpanah, F.; Lau, A.K.; Sokhansanj, Shahabaddine; Lim, C. Jim; Melin, Staffan; Bi, X.T.; Afzal, M

    2010-03-01

    Broken pellets and fines are produced during mechanical handlings of wood pellets. The resistance to air flow was measured for clean pellets and for pellets mixed with 1 to 20% broken pellets (fines). A pellet diameter was 6 mm. The lengths ranged from from 6 to 12 mm. Clean pellets were defined as particles that remained on a 4 mm screen. A typical sieve analysis showed 30% of the mass of particles passed through the 4 mm screen were smaller than 1 mm. The airflow rates used in the experiment ranged from 0.004 to 0.357 ms-1. The corresponding pressure drop ranged from 1.9 Pa m-1 to 271 Pa m-1 for clean pellets and from 4.8 to 1100 Pa m 1 for pellets mixed with 10% fines. The pressure drop increased for pellets mixed with increasing fines content. Coefficients of Hukill and Ives equation were estimated for clean pellets and a multiplier was defined to calculate pressure drop for pellets mixed with fines.

  2. Co-combustion of sludge with coal or wood

    SciTech Connect

    Leckner, B.; Aamand, L.-E.

    2004-07-01

    There are several options for co-combustion of biomass or waste with coal. In all cases the fuel properties are decisive for the success of the arrangement: contents of volatile matter and of potential emission precursors, such as sulphur, nitrogen, chlorine, and heavy metals. The content of alkali in the mineral substance of the fuel is important because of the danger of fouling and corrosion. Research activities at Chalmers University of Technology include several aspects of the related problems areas. An example is given concerning emissions from co-combustion in circulating fluidized beds with coal or wood as base fuels, and with sewage sludge as additional fuel. Two aspects of the properties of sludge are studied: emissions of nitrogen and sulphur oxides as well as of chlorine, because the contents of the precursors to these emissions are high. The possibility of utilizing the phosphorus in sludge as a fertilizer is also discussed. The results show that emissions can be kept below existing emission limits if the fraction of sludge is sufficiently small but the concentration of trace elements in the sludge ash prevents the sludge from being used as a fertilizer. 15 refs., 9 figs., 2 tabs.

  3. 8C General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    C General Tables The General Table for 8C is subdivided into the following categories: Reviews Other Theoretical Work

  4. 6Be General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    6Be General Table The General Table for 6Be is subdivided into the following categories: Cluster Model Model Calculations...

  5. URBAN WOOD/COAL CO-FIRING IN THE BELLEFIELD BOILERPLANT

    SciTech Connect

    James T. Cobb Jr.; Gene E. Geiger; William W. Elder III; William P. Barry; Jun Wang; Hongming Li

    2004-04-08

    An Environmental Questionnaire for the demonstration at the Bellefield Boiler Plant (BBP) was submitted to the national Energy Technology Laboratory. An R&D variance for the air permit at the BBP was sought from the Allegheny County Health Department (ACHD). R&D variances for the solid waste permits at the J. A. Rutter Company (JARC), and Emery Tree Service (ETS) were sought from the Pennsylvania Department of Environmental Protection (PADEP). Construction wood was acquired from Thompson Properties and Seven D Corporation. Verbal authorizations were received in all cases. Memoranda of understanding were executed by the University of Pittsburgh with BBP, JARC and ETS. Construction wood was collected from Thompson Properties and from Seven D Corporation. Forty tons of pallet and construction wood were ground to produce BioGrind Wood Chips at JARC and delivered to Mon Valley Transportation Company (MVTC). Five tons of construction wood were hammer milled at ETS and half of the product delivered to MVTC. Blends of wood and coal, produced at MVTC by staff of JARC and MVTC, were shipped by rail to BBP. The experimental portion of the project was carried out at BBP in late March and early April 2001. Several preliminary tests were successfully conducted using blends of 20% and 33% wood by volume. Four one-day tests using a blend of 40% wood by volume were then carried out. Problems of feeding and slagging were experienced with the 40% blend. Light-colored fly ash was observed coming from the stack during all four tests. Emissions of SO{sub 2}, NOx and total particulates, measured by Energy Systems Associates, decreased when compared with combusting coal alone. A procedure for calculating material and energy balances on BBP's Boiler No.1 was developed, using the results of an earlier compliance test at the plant. Material and energy balances were then calculated for the four test periods. Boiler efficiency was found to decrease slightly when the fuel was shifted from coal

  6. DOE's General Counsel Announces New Policy Requiring Online Posting of NEPA Categorical Exclusion Determinations to Further Transparency

    Energy.gov [DOE]

    Washington, DC - Consistent with the President's commitment to "disclose information rapidly in forms that the public can readily find and use," DOE announced today a new policy requiring all DOE...

  7. Fuel switching from wood to LPG can benefit the environment

    SciTech Connect

    Nautiyal, Sunil Kaechele, Harald

    2008-11-15

    The Himalaya in India is one of the world's biodiversity hotspots. Various scientific studies have reported and proven that many factors are responsible for the tremendous decline of the Himalayan forests. Extraction of wood biomass from the forests for fuel is one of the factors, as rural households rely entirely on this for their domestic energy. Efforts continue for both conservation and development of the Himalayan forests and landscape. It has been reported that people are still looking for more viable solutions that could help them to improve their lifestyle as well as facilitate ecosystem conservation and preservation of existing biodiversity. In this direction, we have documented the potential of the introduction of liquefied petroleum gas (LPG), which is one of the solutions that have been offered to the local people as a substitute for woodfuel to help meet their domestic energy demand. The results of the current study found dramatic change in per capita woodfuel consumption in the last two decades in the villages where people are using LPG. The outcome showed that woodfuel consumption had been about 475 kg per capita per year in the region, but after introduction of LPG, this was reduced to 285 kg per capita per year in 1990-1995, and was further reduced to 46 kg per capita per year in 2000-2005. Besides improving the living conditions of the local people, this transformation has had great environmental consequences. Empirical evidence shows that this new paradigm shift is having positive external effects on the surrounding forests. Consequently, we have observed a high density of tree saplings and seedlings in adjacent forests, which serves as an assessment indicator of forest health. With the help of the current study, we propose that when thinking about a top-down approach to conservation, better solutions, which are often ignored, should be offered to local people.

  8. Flash methanolysis of wood for the production of fuels and chemicals

    SciTech Connect

    Steinberg, M.; Fallon, P.T.; Sundaram, M.S.

    1983-01-01

    Biomass in the form of less than 1000 micron oven dried fir wood particles was flash pyrolyzed in the presence of methane (methanolysis) in a downflow 1 in. I.D. tubular reactor at pressures of 20 to 200 psi and temperatures between 800/sup 0/ and 1050/sup 0/C. The major products were benzene, toluene and xylene (BTX), a heavy oily liquid (greater than or equal to C/sub 9/), ethylene and carbon monoxide. As much as 12% of the available carbon in the wood was converted to BTX, 21% to ethylene and 48% to carbon monoxide at 50 psi and 1000/sup 0/C. The maximum heavier oil yield of 11% was observed at 50 psi and 800/sup 0/C. Wood particle residence times for all experiments were calculated to be less than 1 second at 20 and 50 psi and up to 2.8 sec at 200 psi. The yelds were found to be greatly influenced by the methane to wood feed ratio. Experiments were conducted to insure the results to be that produced from the wood and methane and not a catalytic effect of the reactor wall of foreign matter. Material balance, including char analyses, indicate approximately 75 to 80% of the available carbon in the feed wood reacted. Methane balances were within the margin of error of the measuring equipment showing that there is no significant net production or consumption of methane. A preliminary economic evaluation of a 2000 ton/day wood processing plant producing ethylene, benzene and methanol showed a reasonably cmpetitive plant investment of $29,000/barrel fuel oil equivalent/day assuming 15% return on investment and present market values for the products.

  9. Quantifying And Predicting Wood Quality Of Loblolly And Slash Pine Under Intensive Forest Management Final Technical Report

    SciTech Connect

    Richard F. Daniels; Alexander Clark III

    2006-05-04

    The forest industry will increasingly rely on fast-growing intensively managed southern pine plantations to furnish wood and fiber. Intensive silvicultural practices, including competition control, stand density control, fertilization, and genetic improvement are yielding tremendous gains in the quantity of wood production from commercial forest land. How these technologies affect wood properties was heretofore unknown, although there is concern about the suitability of fast-grown wood for traditional forest products. A four year study was undertaken to examine the effects of these intensive practices on the properties of loblolly and slash pine wood by applying a common sampling method over 10 existing field experiments. Early weed control gets young pines off to a rapid start, often with dramatically increased growth rates. This response is all in juvenile wood however, which is low in density and strength. Similar results are found with early Nitrogen fertilization at the time of planting. These treatments increase the proportion of juvenile wood in the tree. Later, mid-rotation fertilization with Nitrogen and Phosphorus can have long term (4-8 year) growth gains. Slight reductions in wood density are short-lived (1-2 years) and occur while the tree is producing dense, stiff mature wood. Impacts of mid-rotation fertilization on wood properties for manufacturing are estimated to be minimal. Genetic differences are evident in wood density and other properties. Single family plantings showed somewhat more uniform properties than bulk improved or unimproved seedlots. Selection of genetic sources with optimal wood properties may counter some of the negative impacts of intensive weed control and fertilization. This work will allow forest managers to better predict the effects of their practices on the quality of their final product.

  10. Proteomic and Functional Analysis of the Cellulase System Expressed by Postia placenta during Brown Rot of Solid Wood

    SciTech Connect

    Ryu, Jae San; Shary, Semarjit; Houtman, Carl J.; Panisko, Ellen A.; Korripally, Premsagar; St John, Franz J.; Crooks, Casey; Siika-aho, Matti; Magnuson, Jon K.; Hammel, Ken

    2011-11-01

    Abstract Brown rot basidiomycetes have an important ecological role in lignocellulose recycling and are notable for their rapid degradation of wood polymers via oxidative and hydrolytic mechanisms. However, most of these fungi apparently lack processive (exo-acting) cellulases, such as cellobiohydrolases, which are generally required for efficient cellulolysis. The recent sequencing of the Postia placenta genome now permits a proteomic approach to this longstanding conundrum. We grew P. placenta on solid aspen wood, extracted proteins from the biodegrading substrate, and analyzed tryptic digests by shotgun liquid chromatography-tandem mass spectrometry. Comparison of the data with the predicted P. placenta proteome revealed the presence of 34 likely glycoside hydrolases, but only four of these-two in glycoside hydrolase family 5, one in family 10, and one in family 12-have sequences that suggested possible activity on cellulose. We expressed these enzymes heterologously and determined that they all exhibited endoglucanase activity on phosphoric acid-swollen cellulose. They also slowly hydrolyzed filter paper, a more crystalline substrate, but the soluble/insoluble reducing sugar ratios they produced classify them as nonprocessive. Computer simulations indicated that these enzymes produced soluble/insoluble ratios on reduced phosphoric acid-swollen cellulose that were higher than expected for random hydrolysis, which suggests that they could possess limited exo activity, but they are at best 10-fold less processive than cellobiohydrolases. It appears likely that P. placenta employs a combination of oxidative mechanisms and endo-acting cellulases to degrade cellulose efficiently in the absence of a significant processive component.

  11. Lethal synergism between organic and inorganic wood preservatives via formation of an unusual lipophilic ternary complex

    SciTech Connect

    Sheng, Zhi-Guo; Li, Yan; Fan, Rui-Mei; Chao, Xi-Juan; Zhu, Ben-Zhan; Linus Pauling Institute, Oregon State University, Corvallis, OR 97331

    2013-02-01

    We have shown previously that exposing bacteria to wood preservatives pentachlorophenol (PCP) and copper-containing compounds together causes synergistic toxicity. However, it is not clear whether these findings also hold true in mammalian cells; and if so, what is the underlying molecular mechanism? Here we show that PCP and a model copper complex bis-(1,10-phenanthroline) cupric (Cu(OP){sub 2}), could also induce synergistic cytotoxicity in human liver cells. By the single crystal X-ray diffraction and atomic absorption spectroscopy assay, the synergism was found to be mainly due to the formation of a lipophilic ternary complex with unusual structural and composition characteristics and subsequent enhanced cellular copper uptake, which markedly promoted cellular reactive oxygen species (ROS) production, leading to apoptosis by decreasing mitochondrial membrane potential, increasing pro-apoptotic protein expression, releasing cytochrome c from mitochondria and activating caspase-3, and -9. Analogous results were observed with other polychlorinated phenols (PCPs) and Cu(OP){sub 2}. Synergistic cytotoxicity could be induced by PCP/Cu(OP){sub 2} via formation of an unusual lipophilic complex in HepG2 cells. The formation of ternary complexes with similar lipophilic character could be of relevance as a general mechanism of toxicity, which should be taken into consideration especially when evaluating the toxicity of environmental pollutants found at currently-considered non- or sub-toxic concentrations. -- Highlights: ? The combination of PCP/Cu(OP){sub 2} induces synergistic cytotoxicity in HepG2 cells. ? The synergism is mainly due to forming a lipophilic ternary complex between them. ? The formation of lipophilic ternary complex enhances cellular copper uptake. ? PCP/Cu(OP){sub 2} stimulates the cellular ROS production. ? The ROS promoted by PCP/Cu(OP){sub 2} induces mitochondria-dependent apoptosis.

  12. A novel approach in organic waste utilization through biochar addition in wood/polypropylene composites

    SciTech Connect

    Das, Oisik; Sarmah, Ajit K.; Bhattacharyya, Debes

    2015-04-15

    Highlights: • Biochar made from waste wood was added with wood polypropylene composites. • 24% biochar gave the best mechanical properties. • 6% biochar had no effect on physico-mechanical properties of composites. • Coupling agent remained unreacted in composites having higher amount of biochar. - Abstract: In an attempt to concurrently address the issues related to landfill gas emission and utilization of organic wastes, a relatively novel idea is introduced to develop biocomposites where biochar made from pyrolysis of waste wood (Pinus radiata) is added with the same wood, plastic/polymer (polypropylene) and maleated anhydride polypropylene (MAPP). Experiments were conducted by manufacturing wood and polypropylene composites (WPCs) mixed with 6 wt%, 12 wt%, 18 wt%, 24 wt%, and 30 wt% biochar. Though 6 wt% addition had similar properties to that of the control (composite without biochar), increasing biochar content to 24 wt% improved the composite’s tensile/flexural strengths and moduli. The biochar, having high surface area due to fine particles and being highly carbonised, acted as reinforcing filler in the biocomposite. Composites having 12 wt% and 18 wt% of biochar were found to be the most ductile and thermally stable, respectively. This study demonstrates that, WPCs added with biochar has good potential to mitigate wastes while simultaneously producing biocomposites having properties that might be suited for various end applications.

  13. URBAN WOOD/COAL CO-FIRING IN THE BELLEFIELD BOILERPLANT

    SciTech Connect

    James T. Cobb, Jr.; Gene E. Geiger; William W. Elder III; William P. Barry; Jun Wang; Hongming Li

    2001-08-21

    During the third quarter, important preparatory work was continued so that the experimental activities can begin early in the fourth quarter. Authorization was awaited in response to the letter that was submitted to the Allegheny County Health Department (ACHD) seeking an R&D variance for the air permit at the Bellefield Boiler Plant (BBP). Verbal authorizations were received from the Pennsylvania Department of Environmental Protection (PADEP) for R&D variances for solid waste permits at the J. A. Rutter Company (JARC), and Emery Tree Service (ETS). Construction wood was acquired from Thompson Properties and Seven D Corporation. Forty tons of pallet and construction wood were ground to produce BioGrind Wood Chips at JARC and delivered to Mon Valley Transportation Company (MVTC). Five tons of construction wood were milled at ETS and half of the product delivered to MVTC. Discussions were held with BBP and Energy Systems Associates (ESA) about the test program. Material and energy balances on Boiler No.1 and a plan for data collection were prepared. Presentations describing the University of Pittsburgh Wood/Coal Co-Firing Program were provided to the Pittsburgh Chapter of the Pennsylvania Society of Professional Engineers, and the Upgraded Coal Interest Group and the Biomass Interest Group (BIG) of the Electric Power Research Institute (EPRI). An article describing the program appeared in the Pittsburgh Post-Gazette. An application was submitted for authorization for a Pennsylvania Switchgrass Energy and Conservation Program.

  14. Mass transport parameters of aspen wood chip beds via stimulus-response tracer techniques

    SciTech Connect

    Hradil, G.; Calo, J.M.; Wunderlich, T.K. Jr. )

    1993-02-05

    A stimulus-response tracer technique has been used to characterize packed beds of untreated, as well as acid prehydrolyzed, and enzymatically hydrolyzed aspen wood chips. Glucose was used as the trace. Bulk liquid phase dispersion, interphase mass transfer, and intraparticle diffusion coefficients were determined for these materials as well as effective porosities and tortuosities. The untreated and prehydrolyzed aspen wood chips were found to have effective void fractions of ca. 0.8, while the enzymatically hydrolyzed wood chips exhibited a void fraction of 0.37. Intraparticle diffusion was approximately twice as rapid in the prehydrolyzed and enzymatically hydrolyzed wood chips as in the untreated wood chips. Also, under the current experimental conditions, intraparticle diffusional transport resistance accounted for roughly half of the total tracer pulse dispersion. It is demonstrated that stimulus-response tracer techniques can be useful and convenient probes for beds of lignocellulosic, or other porous materials, which vary in character with extent of conversion and/or treatment.

  15. Simple and Inexpensive Method of Wood Pellets Macro-porosity Measurement

    SciTech Connect

    C. Igathinathane; Jaya Shankar Tumuluru; S. Sokhansanj; X. Bi; C. J. Lim; S. Melin; E. Mohammad

    2010-08-01

    A novel simplified stereometric measurement method for determining the macro-porosity of wood pellets through geometrical approach was successfully developed and tested. The irregular ends of pellets of circular cross-section were sanded flat so that their geometry becomes cylinder and their volumes evaluated using mensuration formula. Such formed cylindrical pellets were loose or tap filled to selected volumes to evaluate the macro-porosity and the constant specific weight. The method was extended to evaluate actual wood pellets properties. Overall macro-porosity of actual wood pellets was determined as 41.0±2.5% and 35.5±2.7%, mean bulk density as and , and classified as “Class-3:Medium” and “Class-3&4:Medium to Low” for loose and tapped fills, respectively. Hausner ratio and Carr’s compressibility index classify wood pellets as “freely flowing.” The developed stereometric method can be used as a handy inexpensive laboratory procedure to estimate the macro-porosity of different types and makes of wood pellets and other similar packaged materials.

  16. Simple and inexpensive method of wood pellets macro-porosity measurement

    SciTech Connect

    Igathinathane, C.; Tumuluru, J.S.; Sokhansanj, Shahabaddine; Bi, X.T.; Lim, C. Jim; Melin, Staffan; Mohammad, E.

    2010-01-01

    A novel simplified stereometric measurement method for determining the macro-porosity of wood pellets through geometrical approach was successfully developed and tested. The irregular ends of pellets of circular cross-section were sanded flat so that their geometry becomes cylinder and their volumes evaluated using mensuration formula. Such formed cylindrical pellets were loose or tap filled to selected volumes to evaluate the macro-porosity and the constant specific weight. The method was extended to evaluate actual wood pellets properties. Overall macro-porosity of actual wood pellets was determined as 41.0 2.5% and 35.5 2.7%, mean bulk density as and, and classified as Class-3:Medium and Class-3&4:Medium to Low for loose and tapped fills, respectively. Hausner ratio and Carr s compressibility index classify wood pellets as freely flowing. The developed stereometric method can be used as a handy inexpensive laboratory procedure to estimate the macro-porosity of different types and makes of wood pellets and other similar packaged materials.

  17. 7He General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    He General Table The General Table for 7He is subdivided into the following categories: Experimental Theoretical Model Calculations Hypernuclei and Mesons Pions

  18. 9He General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    He General Table The General Table for 9He is subdivided into the following categories: Shell Model Other Model Calculations Theoretical

  19. General | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    General Jump to: navigation, search Informacin y Documentos Herramientas y Modelos <> Estadsticas de Energas Renovables Volver Pgina principal General banner.jpg Retrieved...

  20. 5H General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    H General Table The General Table for 5H is subdivided into the following categories: Cluster Model Hypernuclei Model Calculations Photodisintegration Pions...

  1. 10He General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    General Table The General Table for 10He is subdivided into the following categories: Theoretical Shell Model Cluster Model Other Models Special States Electromagnetic Transitions...

  2. Precision wood particle feedstocks with retained moisture contents of greater than 30% dry basis

    DOEpatents

    Dooley, James H; Lanning, David N

    2014-10-28

    Wood particles having fibers aligned in a grain, wherein: the wood particles are characterized by a length dimension (L) aligned substantially parallel to the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L; the L.times.H dimensions define two side surfaces characterized by substantially intact longitudinally arrayed fibers; the W.times.H dimensions define two cross-grain end surfaces characterized individually as aligned either normal to the grain or oblique to the grain; the L.times.W dimensions define two substantially parallel top and bottom surfaces; and, a majority of the W.times.H surfaces in the mixture of wood particles have end checking.

  3. Renewable wood fuel: Fuel feed system for a pulverized coal boiler. Final report

    SciTech Connect

    1996-01-01

    This report evaluates a pilot test program conducted by New York State Gas & Electric Corporation to evaluate the feasibility of co-firing a pulverized coal plant with renewable wood fuels. The goal was to establish that such a co-firing system can reduce air emissions while maintaining good operational procedures and cost controls. The test fuel feed system employed at Greenidge Station`s Boiler 6 was shown to be effective in feeding wood products. Emission results were promising and an economic analysis indicates that it will be beneficial to pursue further refinements to the equipment and systems. The report recommends further evaluation of the generation and emission impacts using woods of varied moisture contents and at varied Btu input rates to determine if a drying system would be a cost-effective option.

  4. Electric co-generation units equipped with wood gasifier and Stirling engine

    SciTech Connect

    Bartolini, C.M.; Caresana, F.; Pelagalli, L.

    1998-07-01

    The disposal of industrial waste such as oil sludges, waste plastic, lubricant oils, paper and wood poses serious problems due to the ever increasing amount of material to be disposed of and to the difficulty in finding new dumping sites. The interest in energy recovery technologies is accordingly on the increase. In particular, large amounts of waste wood are simply burned or thrown away causing considerable environmental damage. In this context the co-generation technique represents one of the possible solutions for efficient energy conversion. The present paper proposes the employment of a Stirling engine as prime mover in a co-generation set equipped with a wood gasifier. A Stirling engine prototype previously developed in a joint project with Mase Generators, an Italian manufacturer of fixed and portable electrogenerators, is illustrated and its design is described.

  5. Assessment of potential wood supply for intermediate scale thermoconversion facilities, Tasks I, II, III

    SciTech Connect

    Not Available

    1985-11-01

    The Department of Energy's Biomass Thermochemical Conversion Program has been concerned with the potential of wood biomass to contribute to the Nation's energy supply. One of the factors inhibiting the selection of wood biomass for energy by non-forest industries, especially by those requiring large quantities (500 to 2000 green tons per day), is concern with adequate fuel supply in terms of both a supply system and an adequate resource base. With respect to the latter, this report looks at the gross resource base as has been historically reported and also examines factors other than traditional product removals that could reduce to some degree the amount of resource that is available. The study also examined the conversion of a New England utility from coal to wood chips.

  6. The flash pyrolysis and methanolysis of biomass (wood) for production of ethylene, benzene and methanol

    SciTech Connect

    Steinberg, M.; Fallon, P.T.; Sundaram, M.S.

    1990-02-01

    The process chemistry of the flash pyrolysis of biomass (wood) with the reactive gases, H{sub 2} and CH{sub 4} and with the non-reactive gases He and N{sub 2} is being determined in a 1 in. downflow tubular reactor at pressures from 20 to 1000 psi and temperatures from 600 to 1000{degrees}C. With hydrogen, flash hydropyrolysis leads to high yields of methane and CO which can be used for SNG and methanol fuel production. With methane, flash methanolysis leads to high yields of ethylene, benzene and CO which can be used for the production of valuable chemical feedstocks and methanol transportation fuel. At reactor conditions of 50 psi and 1000{degrees}C and approximately 1 sec residence time, the yields based on pine wood carbon conversion are up to 25% for ethylene, 25% for benzene, and 45% for CO, indicating that over 90% of the carbon in pine is converted to valuable products. Pine wood produces higher yields of hydrocarbon products than Douglas fir wood; the yield of ethylene is 2.3 times higher with methane than with helium or nitrogen, and for pine, the ratio is 7.5 times higher. The mechanism appears to be a free radical reaction between CH{sub 4} and the pyrolyzed wood. There appears to be no net production or consumption of methane. A preliminary process design and analysis indicates a potentially economical competitive system for the production of ethylene, benzene and methanol based on the methanolysis of wood. 10 refs., 18 figs., 1 tab.

  7. Lowell L. Wood, 1981 | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Lowell L. Wood, 1981 The Ernest Orlando Lawrence Award Lawrence Award Home Nomination & Selection Guidelines Award Laureates 2010's 2000's 1990's 1980's 1970's 1960's Ceremony The Life of Ernest Orlando Lawrence Contact Information The Ernest Orlando Lawrence Award U.S. Department of Energy SC-2/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-2411 E: Email Us 1980's Lowell L. Wood, 1981 Print Text Size: A A A FeedbackShare Page National Security: For his

  8. Investigation of possible health effects of community exposure to fermenting wood chips

    SciTech Connect

    Birkhead, G.; Vogt, R.L.; Hudson, P.J.

    1988-03-01

    We conducted a case-control study of emergency room (ER) patients to evaluate whether asthma is caused by living near a wood-chip fueled power plant that released wood-chip fermentation products. Only eight (29 per cent) of 28 asthma patients seen in the ER during an 11-week period lived within 1.5 miles of the plant compared with 18 (34 per cent) of 54 control patients matched for severity of diagnosis and seen during the same period (Mantel-Haenszel odds ratio controlling for age = 0.96).

  9. Slide 1

    National Nuclear Security Administration (NNSA)

    Bruce Diamond General Counsel Deputy General Counsel General Law & Litigation SFO Field Counsel (2) LAFO Field Counsel (3) NFO Field Counsel SRFO Field Counsel LFO Field Counsel (2) NPO(PANTEX) Field Counsel 7 Attorneys Executive Assistant NPO (Y12) Field Counsel NRLFO Field Counsel NNSA Office of the General Counsel KCFO Field Counsel Deputy General Counsel Procurement, IP & Tech Transfer 4 Attorneys 1 Educational Outreach Legal Intern/Extern 4 Patent Attorneys 1 Patent Agent 1

  10. Demonstration Results From Greenhouse Heating with Liquified Wood

    SciTech Connect

    Steele, Philip; Parish, Don; Cooper, Jerome

    2011-07-01

    A boiler fuel known as Lignocellulosic Boiler Fuel (LBF) was developed at the Department of Forest Products, Mississippi State University for potential application for heating agricultural buildings. LBF was field tested to heat green houses in cooperation with Natchez Trace Greenhouses (NTG) located in Kosciusko, Mississippi. MSU modified an idled natural gas boiler located at NTG to combust the LBF. Thirty gallons of bio-oil were produced at the MSU Bio-oil Research Laboratory. The bio-oil was produced from the fast-pyrolysis of southern pine (15 gal) and white oak (15 gal) feedstocks and subsequently upgraded by a proprietary process. Preliminary field testing was conducted at (NTG). The LBF was produced from each wood species was tested separately and co-fed with diesel fuel to yield three fuel formulations: (1) 100% diesel; (2) 87.5% LBF from southern pine bio-oil co-fed with 12.5% diesel and (3) 87.5% LBF from white oak co-fed with 12.5% diesel fuel formulations. Each fuel formulation was combusted in a retrofit NTG boiler. Fuel consumption and water temperature were measured periodically. Flue gas from the boiler was analyzed by gas chromatograph. The 100% diesel fuel increased water temperature at a rate of 4 °F per min. for 35 min. to achieve the target 140 °F water temperature increase. The 87.5% pine LBF fuel cofed with 12.5%) diesel attained the 140 °F water temperature increase in 62 min. at a rate of 2.3 °F per min. The 87.5% white oak LBF fuel co-fed with 12.5% diesel reached the 140 °F water temperature increase in 85 min. at a rate of 1.6 °F per min. Fuel that contained 87.5% pine LBF co-fed with 12.5% diesel yielded nitrogen and oxygen at a ratio of 5.3 and carbon dioxide and carbon monoxide at a ratio of 22.2. Fuel formulations that contained 87.5% white oak LBF co-fed with 12.5% diesel yielded nitrogen and oxygen at a ratio of 4.9 and carbon dioxide and

  11. Generalized Cartan Calculus in general dimension

    DOE PAGES [OSTI]

    Wang, Yi -Nan

    2015-07-22

    We develop the generalized Cartan Calculus for the groups G = SL(2,R) × R+, SL(5,R) and SO(5,5). They are the underlying algebraic structures of d=9,7,6 exceptional field theory, respectively. These algebraic identities are needed for the "tensor hierarchy" structure in exceptional field theory. The validity of Poincar\\'e lemmas in this new differential geometry is also discussed. Lastly, we explore some possible extension of the generalized Cartan calculus beyond the exceptional series.

  12. Agenda 2020: A Technology Vision and Research Agenda for America's Forest, Wood and Paper Industry

    SciTech Connect

    none,

    1994-11-01

    In November 1994, the forest products industry published Agenda 2020: A Technology Vision and Research Agenda for America's Forest, Wood and Paper Industry, which articulated the industry's vision. This document set the foundation for collaborative efforts between the industry and the federal government.

  13. X-ray computed tomography of wood-adhesive bondlines: Attenuation and phase-contrast effects

    DOE PAGES [OSTI]

    Paris, Jesse L.; Kamke, Frederick A.; Xiao, Xianghui

    2015-07-29

    Microscale X-ray computed tomography (XCT) is discussed as a technique for identifying 3D adhesive distribution in wood-adhesive bondlines. Visualization and material segmentation of the adhesives from the surrounding cellular structures require sufficient gray-scale contrast in the reconstructed XCT data. Commercial wood-adhesive polymers have similar chemical characteristics and density to wood cell wall polymers and therefore do not provide good XCT attenuation contrast in their native form. Here, three different adhesive types, namely phenol formaldehyde, polymeric diphenylmethane diisocyanate, and a hybrid polyvinyl acetate, are tagged with iodine such that they yield sufficient X-ray attenuation contrast. However, phase-contrast effects at material edgesmore » complicate image quality and segmentation in XCT data reconstructed with conventional filtered backprojection absorption contrast algorithms. A quantitative phase retrieval algorithm, which isolates and removes the phase-contrast effect, was demonstrated. The paper discusses and illustrates the balance between material X-ray attenuation and phase-contrast effects in all quantitative XCT analyses of wood-adhesive bondlines.« less

  14. X-ray computed tomography of wood-adhesive bondlines: Attenuation and phase-contrast effects

    SciTech Connect

    Paris, Jesse L.; Kamke, Frederick A.; Xiao, Xianghui

    2015-07-29

    Microscale X-ray computed tomography (XCT) is discussed as a technique for identifying 3D adhesive distribution in wood-adhesive bondlines. Visualization and material segmentation of the adhesives from the surrounding cellular structures require sufficient gray-scale contrast in the reconstructed XCT data. Commercial wood-adhesive polymers have similar chemical characteristics and density to wood cell wall polymers and therefore do not provide good XCT attenuation contrast in their native form. Here, three different adhesive types, namely phenol formaldehyde, polymeric diphenylmethane diisocyanate, and a hybrid polyvinyl acetate, are tagged with iodine such that they yield sufficient X-ray attenuation contrast. However, phase-contrast effects at material edges complicate image quality and segmentation in XCT data reconstructed with conventional filtered backprojection absorption contrast algorithms. A quantitative phase retrieval algorithm, which isolates and removes the phase-contrast effect, was demonstrated. The paper discusses and illustrates the balance between material X-ray attenuation and phase-contrast effects in all quantitative XCT analyses of wood-adhesive bondlines.

  15. Review and analysis of emissions data for residential wood-fired central furnaces

    SciTech Connect

    McCrillis, R.C.

    1998-12-31

    The paper reviews data published over the past 10--15 years on domestic wood-fired central heaters. Emphasis is on stick-fired units, the most common type used in the US, but also presented are data on chip- and pellet-fired units, showing that they are capable of achieving lower emissions.

  16. Property:Building/SPPurchasedEngyPerAreaKwhM2WoodChips | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    PerAreaKwhM2WoodChips" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 0.0 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 0.0...

  17. Property:Building/SPPurchasedEngyNrmlYrMwhYrWoodChips | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    yNrmlYrMwhYrWoodChips" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 0.0 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 0.0...

  18. Property:Building/SPPurchasedEngyForPeriodMwhYrWoodChips | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    rPeriodMwhYrWoodChips" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 0.0 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 0.0...

  19. Isolation of levoglucosan from lignocellulosic pyrolysis oil derived from wood or waste newsprint

    DOEpatents

    Moens, L.

    1995-07-11

    A method is provided for preparing high purity levoglucosan from lignocellulosic pyrolysis oils derived from wood or waste newsprint. The method includes reducing wood or newsprint to fine particle sizes, treating the particles with a hot mineral acid for a predetermined period of time, and filtering off and drying resulting solid wood or newsprint material; pyrolyzing the dried solid wood or newsprint material at temperatures between about 350 and 375 C to produce pyrolysis oils; treating the oils to liquid-liquid extraction with methyl isobutyl ketone to remove heavy tar materials from the oils, and to provide an aqueous fraction mixture of the oils containing primarily levoglucosan; treating the aqueous fraction mixtures with a basic metal salt in an amount sufficient to elevate pH values to a range of about 12 to about 12.5 and adding an amount of the salt in excess of the amount needed to obtain the pH range to remove colored materials of impurities from the oil and form a slurry, and freeze-drying the resulting slurry to produce a dry solid residue; and extracting the levoglucosan from the residue using ethyl acetate solvent to produce a purified crystalline levoglucosan. 2 figs.

  20. Isolation of levoglucosan from lignocellulosic pyrolysis oil derived from wood or waste newsprint

    DOEpatents

    Moens, Luc

    1995-01-01

    A method is provided for preparing high purity levoglucosan from lignocellulosic pyrolysis oils derived from wood or waste newsprint. The method includes reducing wood or newsprint to fine particle sizes, treating the particles with a hot mineral acid for a predetermined period of time, and filtering off and drying resulting solid wood or newsprint material; pyrolyzing the dried solid wood or newsprint material at temperatures between about 350.degree. and 375.degree. C. to produce pyrolysis oils; treating the oils to liquid-liquid extraction with methyl isobutyl ketone to remove heavy tar materials from the oils, and to provide an aqueous fraction mixture of the oils containing primarily levoglucosan; treating the aqueous fraction mixtures with a basic metal salt in an amount sufficient to elevate pH values to a range of about 12 to about 12.5 and adding an amount of the salt in excess of the amount needed to obtain the pH range to remove colored materials of impurities from the oil and form a slurry, and freeze-drying the resulting slurry to produce a dry solid residue; and extracting the levoglucosan from the residue using ethyl acetate solvent to produce a purified crystalline levoglucosan.

  1. Pennsylvanian and Permian paleogeography of south-central Idaho: The Wood River basin

    SciTech Connect

    Mahoney, J.B. ); Burton, B.R. ); O'Brien, J.P.; Link, P.K. )

    1991-02-01

    The Sun Valley Assemblage (Wood River, Dollarhide, and Grand Prize formations) was deposited in the Wood Rover basin in what is now south-central Idaho, north of the Snake River Plain, from the Atokan to Wolfcampian and Leonardian( ). Atokan and Des Moinesian deposition occurred in braided deltas and overlying clear water carbonate shoals. The rocks of this depositional system vary in thickness from tens to several hundreds of meters reflecting irregularities in the erosional surface on the underlying foundered Antler highland. This basal unconformity has been sheared during Mesozoic and Paleogene deformation. Significant regional subsidence of the Wood River basin began in the Des Moinesian, was most rapid in the Virgilian, and slowed in the Wolfcampian, resulting in total thickness of over 2,000 m for each of the three formations. In the central part of the basin (Wood River Formation) a sub-wave-base ramp system with southeastern paleoslope was fed by turbidite flows of mixed carbonate-siliciclastic fine-grained sediment that had been thoroughly mixed on a shelf area to the north and east. The carbonate fraction may have been derived from the Snaky Canyon Formation carbonate platform to the east. To the north, a siliciclastic fan or ramp system (Grand Prize Formation) was present. Virgilian and Wolfcampian strata represent highstand systems tracts and a lowstand tract is present in strata deposited near the Virgilian-Wolfcampian boundary.

  2. How chip size impacts steam pretreatment effectiveness for biological conversion of poplar wood into fermentable sugars

    DOE PAGES [OSTI]

    DeMartini, Jaclyn D.; Foston, Marcus; Meng, Xianzhi; Jung, Seokwon; Kumar, Rajeev; Ragauskas, Arthur J.; Wyman, Charles E.

    2015-12-09

    We report that woody biomass is highly recalcitrant to enzymatic sugar release and often requires significant size reduction and severe pretreatments to achieve economically viable sugar yields in biological production of sustainable fuels and chemicals. However, because mechanical size reduction of woody biomass can consume significant amounts of energy, it is desirable to minimize size reduction and instead pretreat larger wood chips prior to biological conversion. To date, however, most laboratory research has been performed on materials that are significantly smaller than applicable in a commercial setting. As a result, there is a limited understanding of the effects that largermore » biomass particle size has on the effectiveness of steam explosion pretreatment and subsequent enzymatic hydrolysis of wood chips. To address these concerns, novel downscaled analysis and high throughput pretreatment and hydrolysis (HTPH) were applied to examine whether differences exist in the composition and digestibility within a single pretreated wood chip due to heterogeneous pretreatment across its thickness. Heat transfer modeling, Simons’ stain testing, magnetic resonance imaging (MRI), and scanning electron microscopy (SEM) were applied to probe the effects of pretreatment within and between pretreated wood samples to shed light on potential causes of variation, pointing to enzyme accessibility (i.e., pore size) distribution being a key factor dictating enzyme digestibility in these samples. Application of these techniques demonstrated that the effectiveness of pretreatment of Populus tremuloides can vary substantially over the chip thickness at short pretreatment times, resulting in spatial digestibility effects and overall lower sugar yields in subsequent enzymatic hydrolysis. Finally, these results indicate that rapid decompression pretreatments (e.g., steam explosion) that specifically alter accessibility at lower temperature conditions are well suited for larger

  3. How chip size impacts steam pretreatment effectiveness for biological conversion of poplar wood into fermentable sugars

    SciTech Connect

    DeMartini, Jaclyn D.; Foston, Marcus; Meng, Xianzhi; Jung, Seokwon; Kumar, Rajeev; Ragauskas, Arthur J.; Wyman, Charles E.

    2015-12-09

    We report that woody biomass is highly recalcitrant to enzymatic sugar release and often requires significant size reduction and severe pretreatments to achieve economically viable sugar yields in biological production of sustainable fuels and chemicals. However, because mechanical size reduction of woody biomass can consume significant amounts of energy, it is desirable to minimize size reduction and instead pretreat larger wood chips prior to biological conversion. To date, however, most laboratory research has been performed on materials that are significantly smaller than applicable in a commercial setting. As a result, there is a limited understanding of the effects that larger biomass particle size has on the effectiveness of steam explosion pretreatment and subsequent enzymatic hydrolysis of wood chips. To address these concerns, novel downscaled analysis and high throughput pretreatment and hydrolysis (HTPH) were applied to examine whether differences exist in the composition and digestibility within a single pretreated wood chip due to heterogeneous pretreatment across its thickness. Heat transfer modeling, Simons’ stain testing, magnetic resonance imaging (MRI), and scanning electron microscopy (SEM) were applied to probe the effects of pretreatment within and between pretreated wood samples to shed light on potential causes of variation, pointing to enzyme accessibility (i.e., pore size) distribution being a key factor dictating enzyme digestibility in these samples. Application of these techniques demonstrated that the effectiveness of pretreatment of Populus tremuloides can vary substantially over the chip thickness at short pretreatment times, resulting in spatial digestibility effects and overall lower sugar yields in subsequent enzymatic hydrolysis. Finally, these results indicate that rapid decompression pretreatments (e.g., steam explosion) that specifically alter accessibility at lower temperature conditions are well suited for larger wood

  4. 8Be General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Be General Tables The General Table for 8Be is subdivided into the following categories: Reviews Ground State Properties Shell Model Cluster Model Other Models Photodisintegration Fission and Fusion Astrophysical b-decay Hypernuclei

  5. 8He General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    He General Tables The General Table for 8He is subdivided into the following categories: Reviews Ground-state Properties Shell Model Cluster Model Other Theoretical Work Elastic and Inelastic Scattering b-decay

  6. 9B General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    B General Table The General Table for 9B is subdivided into the following categories: Shell Model Cluster Model Theoretical Other Model Calculations Complex Reactions Beta-Decay Pions Light-ion and Neutron Induced Reactions Hypernuclei

  7. 9C General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    C General Table The General Table for 9C is subdivided into the following categories: Shell Model Cluster Model Other Models Theoretical Beta-Decay Light-ion and Neutron Induced Reactions Astrophysical

  8. OFFICE OF INSPECTOR GENERAL

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    APP-005 Planning for and Measuring Office of Inspector General Results FY 2002 Annual Performance Report and FY 2003 Annual Performance Plan Office of Inspector General U.S. Department of Energy Inspector General's Message We are pleased to present the Office of Inspector General's (OIG) consolidated Fiscal Year 2002 Annual Performance Report and Fiscal Year 2003 Annual Performance Plan. This document evaluates our actual Fiscal Year (FY) 2002 performance and establishes the performance goals

  9. Effects of Headspace and Oxygen Level on Off-gas Emissions from Wood Pellets in Storage

    SciTech Connect

    Sokhansanj, Shahabaddine; Kuang, Xingya; Shankar, T.S.; Lim, C. Jim; Bi, X.T.; Melin, Staffan

    2009-10-01

    Few papers have been published in the open literature on the emissions from biomass fuels, including wood pellets, during the storage and transportation and their potential health impacts. The purpose of this study is to provide data on the concentrations, emission factors, and emission rate factors of CO2, CO, and CH4 from wood pellets stored with different headspace to container volume ratios with different initial oxygen levels, in order to develop methods to reduce the toxic off-gas emissions and accumulation in storage spaces. Metal containers (45 l, 305 mm diameter by 610 mm long) were used to study the effect of headspace and oxygen levels on the off-gas emissions from wood pellets. Concentrations of CO2, CO, and CH4 in the headspace were measured using a gas chromatograph as a function of storage time. The results showed that the ratio of the headspace ratios and initial oxygen levels in the storage space significantly affected the off-gas emissions from wood pellets stored in a sealed container. Higher peak emission factors and higher emission rates are associated with higher headspace ratios. Lower emissions of CO2 and CO were generated at room temperature under lower oxygen levels, whereas CH4 emission is insensitive to the oxygen level. Replacing oxygen with inert gases in the storage space is thus a potentially effective method to reduce the biomass degradation and toxic off-gas emissions. The proper ventilation of the storage space can also be used to maintain a high oxygen level and low concentrations of toxic off-gassing compounds in the storage space, which is especially useful during the loading and unloading operations to control the hazards associated with the storage and transportation of wood pellets.

  10. Minnesota wood energy scale-up project 1994 establishment cost data

    SciTech Connect

    Downing, M.; Pierce, R.; Kroll, T.

    1996-03-18

    The Minnesota Wood Energy Scale-up Project began in late 1993 with the first trees planted in the spring of 1994. The purpose of the project is to track and monitor economic costs of planting, maintaining and monitoring larger scale commercial plantings. For 15 years, smaller scale research plantings of hybrid poplar have been used to screen for promising, high-yielding poplar clones. In this project 1000 acres of hybrid poplar trees were planted on Conservation Reserve Program (CRP) land near Alexandria, Minnesota in 1994. The fourteen landowners involved re-contracted with the CRP for five-year extensions of their existing 10-year contracts. These extended contracts will expire in 2001, when the plantings are 7 years old. The end use for the trees planted in the Minnesota Wood Energy Scale-up Project is undetermined. They will belong to the owner of the land on which they are planted. There are no current contracts in place for the wood these trees are projected to supply. The structure of the wood industry in the Minnesota has changed drastically over the past 5 years. Stumpage values for fiber have risen to more than $20 per cord in some areas raising the possibility that these trees could be used for fiber rather than energy. Several legislative mandates have forced the State of Minnesota to pursue renewable energy including biomass energy. These mandates, a potential need for an additional 1700 MW of power by 2008 by Northern States Power, and agricultural policies will all affect development of energy markets for wood produced much like agricultural crops. There has been a tremendous amount of local and international interest in the project. Contractual negotiations between area landowners, the CRP, a local Resource Conservation and Development District, the Minnesota Department of Natural Resources and others are currently underway for additional planting of 1000 acres in spring 1995.

  11. Generalized Cartan Calculus in general dimension

    SciTech Connect

    Wang, Yi -Nan

    2015-07-22

    We develop the generalized Cartan Calculus for the groups G = SL(2,R) × R+, SL(5,R) and SO(5,5). They are the underlying algebraic structures of d=9,7,6 exceptional field theory, respectively. These algebraic identities are needed for the "tensor hierarchy" structure in exceptional field theory. The validity of Poincar\\'e lemmas in this new differential geometry is also discussed. Lastly, we explore some possible extension of the generalized Cartan calculus beyond the exceptional series.

  12. A = 7 General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    7 General Tables The General Table for 7He is subdivided into the following categories: Experimental Theoretical Model Calculations Hypernuclei and Mesons Pions The General Table for 7Li is subdivided into the following categories: Reviews Ground State Properties Shell Model Cluster Model Other Theoretical Work Model Calculations Photodisintegration Polarization Fission and Fusion Elastic and Inelastic Scattering Projectile Fragmentation and Multifragmentation Astrophysical Hyperfine Structure

  13. Ferns and fires: Experimental charring of ferns compared to wood and implications for paleobiology, paleoecology, coal petrology, and isotope geochemistry

    SciTech Connect

    McParland, L.C.; Collinson, M.E.; Scott, A.C.; Steart, D.C.; Grassineau, N.V.; Gibbons, S.J.

    2007-09-15

    We report the effects of charring on the ferns Osmunda, Pteridium, and Matteucia with coniferous wood (Sequoia) for comparison. Like charred wood, charred ferns shrink, become black and brittle with a silky sheen, and retain three-dimensional cellular structure. Ferns yield recognizable charcoal (up to 800{sup o}C) that could potentially survive in the fossil record enabling reconstruction of ancient fire-prone vegetation containing ferns. Charred fossils of herbaceous ferns would indicate surface fires. Like charred wood, cell-wall layers of charred ferns homogenize, and their reflectance values increase with rising temperature. Charcoalified fragments of thick-walled cells from conifer wood or fern tissues are indistinguishable and so cannot be used to infer the nature of source vegetation. Charred conifer wood and charred fern tissues show a relationship between mean random reflectance and temperature of formation and can be used to determine minimum ancient fire temperatures. Charred fern tissues consistently have significantly more depleted {delta}{sup 13}C values ({le} 4 parts per thousand) than charred wood. Therefore, if an analysis of {delta} {sup 13}C through time included fern charcoal among a succession of wood charcoals, any related shifts in {delta} {sup 13}C could be misinterpreted as atmospheric changes or misused as isotope stratigraphic markers. Thus, charcoals of comparable botanical origin and temperatures of formation should be used in order to avoid misinterpretations of shifts in {delta}{sup 13}C values.

  14. DOE Office of Inspector General Audit Report "The Department of Energy's Management of Contractor Fines, Penalties and Legal Costs"

    Office of Energy Efficiency and Renewable Energy (EERE)

    Please review the attached DOE Office of Inspector General Audit Report "The Department of Energy's Management of Contractor Fines, Penalties and Legal Costs," especially Recommendation 2.a. That Recommendation requires the Senior Procurement Executive, in conjunction with the field site Counsels, to review high-value (which you should define as above $500K) outside law firm invoices for the period identified in the report to ensure no unallowable costs were reimbursed.

  15. Use of a region of the visible and near infrared spectrum to predict mechanical properties of wet wood and standing trees

    DOEpatents

    Meglen, Robert R.; Kelley, Stephen S.

    2003-01-01

    In a method for determining the dry mechanical strength for a green wood, the improvement comprising: (a) illuminating a surface of the wood to be determined with a reduced range of wavelengths in the VIS-NIR spectra 400 to 1150 nm, said wood having a green moisture content; (b) analyzing the surface of the wood using a spectrometric method, the method generating a first spectral data of a reduced range of wavelengths in VIS-NIR spectra; and (c) using a multivariate analysis technique to predict the mechanical strength of green wood when dry by comparing the first spectral data with a calibration model, the calibration model comprising a second spectrometric method of spectral data of a reduced range of wavelengths in VIS-NIR spectra obtained from a reference wood having a green moisture content, the second spectral being correlated with a known mechanical strength analytical result obtained from the reference wood when dried and a having a dry moisture content.

  16. 10Li General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Li General Table The General Table for 10Li is subdivided into the following categories: Reviews Theoretical Ground State Properties Shell Model Cluster Model Other Models Special States Astrophysical Electromagnetic Transitions Hypernuclei Photodisintegration Light-Ion and Neutron Induced Reactions These General Tables correspond to the 2003 preliminary evaluation of ``Energy Levels of Light Nuclei, A = 10''. The prepublication version of A = 10 is available on this website in PDF format: A =

  17. General Service LED Lamps

    SciTech Connect

    2012-04-01

    Solid-state lighting program technology fact sheet that compares general service incandescent lamps—i.e., light bulbs—to LED and CFL alternatives.

  18. General Service LED Lamps

    Energy.gov [DOE]

    A U.S. DOE SSL technology fact sheet that compares general service LED light bulbs with incandescent and CFL bulbs.

  19. A = 10 General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Table for 10He is subdivided into the following categories: Theoretical Shell Model Cluster Model Other Models Special States Electromagnetic Transitions The General Table for...

  20. A = 9 General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The General Table for 9Li is subdivided into the following categories: Shell Model Cluster Model Theoretical Ground State Properties Special States Other Model Calculations...

  1. 10N General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    subdivided into the following categories: Reviews Ground-State Properties Shell Model Cluster Model Other Theoretical Work These General Tables correspond to "Energy Levels of...

  2. Comminution process to produce engineered wood particles of uniform size and shape with disrupted grain structure from veneer

    DOEpatents

    Dooley, James H; Lanning, David N

    2013-07-30

    Comminution process of wood veneer to produce wood particles, by feeding wood veneer in a direction of travel substantially normal to grain through a counter rotating pair of intermeshing arrays of cutting discs arrayed axially perpendicular to the direction of veneer travel, wherein the cutting discs have a uniform thickness (Td), to produce wood particles characterized by a length dimension (L) substantially equal to the Td and aligned substantially parallel to grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) substantially equal to the veneer thickness (Tv) and aligned normal to W and L, wherein the W.times.H dimensions define a pair of substantially parallel end surfaces with end checking between crosscut fibers.

  3. Laboratory evaluation of the hazard to wood mice, Apodemus sylvaticus, from the agricultural use of methiocarb molluscicide pellets

    SciTech Connect

    Tarrant, K.A.; Westlake, G.E.

    1988-01-01

    Laboratory studies have been carried out to determine the toxicity of methiocarb pellets to wild trapped wood mice in order to provide some background data prior to any further evaluation of hazard in the field. In this study, wood mice were exposed to dry and to dampened methiocarb pellets in order to reproduce field trial application conditions. Field observations of methiocarb pellets indicate that the physical character changes under dry and wet weather conditions. This may affect their relative attractiveness and potential toxicity to wood mice. The laboratory assessment of exposed wood mice included measurement of brain esterase activities, methiocarb residues in selected mouse tissue, carcasses, and histological evaluation of kidney, liver and lungs.

  4. Wood-Producing Sunflower? Mining Genetic Diversity in Desert-Dwelling Wild Species (2010 JGI User Meeting)

    ScienceCinema

    Knapp, Steve

    2016-07-12

    Steve Knapp from Monsanto on "Wood-Producing Sunflower? Mining Genetic Diversity in Desert-Dwelling Wild Species" on March 25, 2010 at the 5th Annual DOE JGI User Meeting

  5. Thermal Properties of Wood-Derived Copper-Silicon Carbide Compsites Fabricated Via Electrodeposition

    SciTech Connect

    Pappacena, Kristen E; Johnson, M. T.; Wang, Hsin; Porter, Wallace D; Faber, K. T.

    2010-01-01

    Copper-silicon carbide composites were fabricated by electrodeposition of copper into pores of wood-derived silicon carbide, a ceramic with a microstructure that can be tailored via the use of different wood precursors. Thermal conductivity values were determined using flash diffusivity at temperatures from 0 to 900 C. Thermal conductivities of up to 202 W/m K at 0 C and 148 W/mK at 900 C were achieved. Object-oriented finite-element analysis (OOF) modeling was used to understand the heat flux distributions throughout the microstructures. OOF was also used to calculate the effective thermal conductivity, which correlated well with experimentally-determined values for axially-oriented composites. In addition, OOF was used to predict effective conductivity values and heat flux distributions for transversely-oriented composites.

  6. 5He General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    He General Table The General Table for 5He is subdivided into the following categories: Ground State Properties Theoretical Special States Model Discussions Shell Model Cluster Model Complex Reactions Astrophysics Model Calculations Light-ion and Neutron Induced Reactions Electron Scattering Muon Catalyzed Fusion Other Fusion Photodisintegration Polarization Pions Hypernuclei

  7. 6He General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    He General Table The General Table for 6He is subdivided into the following categories: Ground State Properties Theoretical Special States Shell Model Cluster and alpha-particle Models Other Models Model Calculations Complex Reactions Involving 6He Electromagnetic Transitions Muon and Neutrino Capture and Reactions Reactions Involving pions, Other Mesons and Baryon States Photodisintegration Astrophysics Hypernuclei

  8. 6Li General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Li General Table The General Table for 6Li is subdivided into the following categories: Ground State Properties of 6Li Special States Theoretical Shell Model Cluster Models Complex Reactions Involving 6Li Model Calculations Electromagnetic Transitions Muon and Neutrino Capture and Reactions Reactions Involving Pions, Other Mesons and Baryon States Light-ion and Neutron Induced Reactions Pions Hypernuclei Reactions Involving Antiprotons Astrophysics

  9. 7Be General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Be General Table The General Table for 7Be is subdivided into the following categories: Reviews Experimental Work Shell Model Cluster Model Other Theoretical Work Model Calculations Projectile Fragmentation and Multifragmentation Astrophysical b Decay Astrophysical Neutrinos Hypernuclei, Mesons and Other Exotic Particles Applications

  10. 7Li General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Li General Table The General Table for 7Li is subdivided into the following categories: Reviews Ground State Properties Shell Model Cluster Model Other Theoretical Work Model Calculations Photodisintegration Polarization Fission and Fusion Elastic and Inelastic Scattering Projectile Fragmentation and Multifragmentation Astrophysical Hyperfine Structure b-decay Muons Hypernuclei and Mesons Hypernuclei and Baryons Pion, Kaon and Eta-Mesons Other Work Applications

  11. 8B General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    B General Tables The General Table for 8B is subdivided into the following categories: Reviews Ground State Properties Shell Model Cluster Model Other Models Photodisintegration and Coulomb Dissociation Elastic and Inelastic Scattering Fragmentation Reactions Astrophysical b Decay Nucleon Spatial Distribution

  12. 8Li General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Li General Tables The General Table for 8Li is subdivided into the following categories: Reviews Ground State Properties Shell Model Cluster Model Other Models Photodissociation Fusion and Fission Elastic and Inelastic Scattering Fragmentation Reactions Astrophysical b Decay Hypernuclei Pions, Kaons and h-mesons

  13. 9Li General Tables

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Li General Table The General Table for 9Li is subdivided into the following categories: Shell Model Cluster Model Theoretical Ground State Properties Special States Other Model Calculations Complex Reactions Beta-Decay Pions Muons Photodisintegration Elastic and Inelastic Scattering Electromagnetic Transitions Astrophysical

  14. Genetics of Wood Formation | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Genetics of Wood Formation Biological and Environmental Research (BER) BER Home About Research Facilities Science Highlights Searchable Archive of BER Highlights External link Benefits of BER Funding Opportunities Biological & Environmental Research Advisory Committee (BERAC) Community Resources Contact Information Biological and Environmental Research U.S. Department of Energy SC-23/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3251 F: (301) 903-5051 E:

  15. On-line measurement of lignin in wood pulp by color shift of fluorescence

    SciTech Connect

    Jeffers, Larry A.; Malito, Michael L.

    1996-01-01

    Lignin concentrations from wood pulp samples are measured by applying an excitation light at a selected wavelength to the samples in order to cause the lignin to emit fluorescence. A spectral distribution of the fluorescence emission is then determined. The lignin concentration is then calculated based on the spectral distribution signal. The spectral distribution is quantified by either a wavelength centroid method or a band ratio method.

  16. On-line measurement of lignin in wood pulp by color shift of fluorescence

    DOEpatents

    Jeffers, L.A.; Malito, M.L.

    1996-01-23

    Lignin concentrations from wood pulp samples are measured by applying an excitation light at a selected wavelength to the samples in order to cause the lignin to emit fluorescence. A spectral distribution of the fluorescence emission is then determined. The lignin concentration is then calculated based on the spectral distribution signal. The spectral distribution is quantified by either a wavelength centroid method or a band ratio method. 6 figs.

  17. Byggmeister Test Home. Analysis and Initial Results of Cold Climate Wood-Framed Home Retrofit

    SciTech Connect

    Gates, C.

    2013-01-01

    BSC seeks to further the energy efficiency market for New England area retrofit projects by supporting projects that are based on solid building science fundamentals that will benefit the homeowner through a combination of energy savings, improved durability, and occupant comfort. This report describes a deep retrofit project of a two-family wood-framed home in Belmont, Massachusetts, and examines the retrofit measures for the enclosure amd mechanical systems and reviews the decision-making process that took place during planning.

  18. BIA Southwest Region - Wood Energy Assessment for BIA Schools and Facilities in the Southwest Region

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Wood Energy Assessment for BIA Schools and Facilities in Southwest Region John Waconda, BIA Southwest Region Regional Forester 505-563-3360 Tribal Energy Review October 26, 2006 Project Objectives/Goals * Seek viable solutions to forest product utilization challenges in support of fuels reduction activities, forest health/timber stand improvement projects, and assisting tribal and other forest enterprises seeking higher valued use for waste material. * Demonstrate to tribes and ourselves that

  19. Mathematical model of steam drying of wood chips and other hygroscopic porous media

    SciTech Connect

    Fyhr, C.; Rasmuson, A.

    1996-09-01

    A model is presented that is focused on the drying kinetics of single wood chips as a function of time and external conditions, such as temperature, pressure and velocity of the superheated steam. A multiphase and 2-D approach was used to model the coupled transport of water, vapor, air and heat in anisotropic hygroscopic porous media. The model was verified by drying experiments where measurements of the average moisture content, center temperature and pressure in a single wood chip could be performed simultaneously. A comparison between the calculations and the measurements showed that the drying behavior was well predicted. The drying can be divided into three stages: a heat-up period when condensation on the surface initially increases the moisture content; a period of constant drying rate when the external heat transfer controls the drying rate; and a period of decreasing drying rate when the drying is controlled by internal mass transfer. Many interesting features of the drying could be assigned to the strong anisotropicity of wood, which makes a 2-D model necessary.

  20. Influence of corn steep liquor and glucose on colonization of control and CCB (Cu/Cr/B)-treated wood by brown rot fungi

    SciTech Connect

    Humar, Miha; Pohleven, Franc

    2006-07-01

    There are increasing problems with regard to the disposal of treated wood waste. Due to heavy metals or arsenic in impregnated wood waste, burning and landfill disposal options are not considered to be environmentally friendly solutions for dealing with this problem. Extraction of the heavy metals and recycling of the preservatives from the wood waste is a much more promising and environmentally friendly solution. In order to study the scale up of this process, copper/chromium/boron-treated wood specimens were exposed to copper tolerant (Antrodia vaillantii and Leucogyrophana pinastri) and copper sensitive wood decay fungi (Gloeophyllum trabeum and Poria monticola). Afterwards, the ability of fungal hyphae to penetrate and overgrow the wood specimens was investigated. The fungal growths were stimulated by immersing the specimens into aqueous solution of glucose or corn steep liquor prior to exposure to the fungi. The fastest colonization of the impregnated wood was by the copper tolerant A. vaillantii. Addition of glucose onto the surface of the wood specimens increased the fungi colonization of the specimens; however, immersion of the specimens into the solution of corn steep liquor did not have the same positive influence. These results are important in elucidating copper toxicity in wood decay fungi and for using these fungi for bioremediation of treated wood wastes.

  1. Chief Counsel

    Energy.gov [DOE]

    The U.S. Department of Energy oversees the 586 square mile Hanford Site located along the Columbia River in South East Washington. The Hanford Site handled complex plutonium production for over 40...

  2. Symmetric generalized binomial distributions

    SciTech Connect

    Bergeron, H.; Curado, E. M. F.; Instituto Nacional de Cincia e Tecnologia - Sistemas Complexos, Rua Xavier Sigaud 150, 22290-180 - Rio de Janeiro, RJ ; Gazeau, J. P.; APC, UMR 7164, Univ Paris Diderot, Sorbonne Paris Cit, 75205 Paris ; Rodrigues, Ligia M. C. S. E-mail: evaldo@cbpf.br E-mail: ligia@cbpf.br

    2013-12-15

    In two recent articles, we have examined a generalization of the binomial distribution associated with a sequence of positive numbers, involving asymmetric expressions of probabilities that break the symmetry win-loss. We present in this article another generalization (always associated with a sequence of positive numbers) that preserves the symmetry win-loss. This approach is also based on generating functions and presents constraints of non-negativeness, similar to those encountered in our previous articles.

  3. 2011 IAEA General Conference

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1 IAEA General Conference Remarks as Prepared for Delivery Secretary Steven Chu Monday, September 19, 2011 Thank you, Ambassador Feruta. Congratulations on your election as President of this Conference. I also want to thank Director General Amano for his outstanding leadership. I am honored to represent the United States today, and I want to share a message from President Barack Obama: "On behalf of the United States, please accept my best wishes for a successful International Atomic Energy

  4. General Running Jobs Recommendations

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    General Running Jobs Recommendations General Running Jobs Recommendations Introduction Process affinity (or CPU pinning) means to bind MPI process to a CPU or a range of CPUs on the node. It is important to spread MPI ranks evenly onto different NUMA nodes. Thread affinity forces each process or thread to run on a specific subset of processors, to take advantage of local process state. Correct process and thread affinity is the basis for getting optimal performance. Each Haswell node contains 2

  5. COMPARISON OF THE POPULATIONS OF COMMON WOOD-NYMPH BUTTERFLIES IN BURNED PRAIRIE, UNBURNED PRAIRIE AND OLD FIELD GRASSES

    SciTech Connect

    Hahn, M.; Walton, R.

    2007-01-01

    Common wood-nymph butterfl ies are found throughout the United States and Canada. However, not much is known about how they overwinter or their preferences for particular grasses and habitats. In this study, the impact of prairie management plans on the abundance of the wood-nymph population was assessed, as well as the preference of these butterfl ies for areas with native or non-native grasses. The abundance of common wood-nymph butterfl ies was determined using Pollard walks; more common wood-nymph butterfl ies were found in the European grasses than were found in the burned and unburned prairie sites. The majority of the vegetation at each of the three sites was identifi ed and documented. Using a 1 X 3 ANOVA analysis, it was determined there were signifi cantly more butterfl ies in the European grasses than in the burned and unburned prairie sites (p < 0.0005). There was no signifi cant difference between the burned and unburned treatments of the prairie on the common wood-nymph population. A multiple variable linear regression model described the effect of temperature and wind speed on the number of observed common wood-nymph butterfl ies per hour (p = 0.026). These preliminary results need to be supplemented with future studies. Quadrat analysis of the vegetation from all three sites should be done to search for a correlation between common wood-nymph butterfl y abundance per hour and the specifi c types or quantity of vegetation at each site. The effect of vegetation height and density on the observers visual fi eld should also be assessed.

  6. Generalized galilean genesis

    SciTech Connect

    Nishi, Sakine; Kobayashi, Tsutomu

    2015-03-31

    The galilean genesis scenario is an alternative to inflation in which the universe starts expanding from Minkowski in the asymptotic past by violating the null energy condition stably. Several concrete models of galilean genesis have been constructed so far within the context of galileon-type scalar-field theories. We give a generic, unified description of the galilean genesis scenario in terms of the Horndeski theory, i.e., the most general scalar-tensor theory with second-order field equations. In doing so we generalize the previous models to have a new parameter (denoted by α) which results in controlling the evolution of the Hubble rate. The background dynamics is investigated to show that the generalized galilean genesis solution is an attractor, similarly to the original model. We also study the nature of primordial perturbations in the generalized galilean genesis scenario. In all the models described by our generalized genesis Lagrangian, amplification of tensor perturbations does not occur as opposed to what happens in quasi-de Sitter inflation. We show that the spectral index of curvature perturbations is determined solely from the parameter α and does not depend on the other details of the model. In contrast to the original model, a nearly scale-invariant spectrum of curvature perturbations is obtained for a specific choice of α.

  7. Thermal Pretreatment of Wood for Cogasification/cofiring of Biomass and Coal

    SciTech Connect

    Wang, Ping; Howard, Bret; Hedges, Sheila; Morreale, Bryan; Van Essendelft, Dirk; Berry, David

    2013-10-29

    Utilization of biomass as a co-feed in coal and biomass co-firing and co-gasification requires size reduction of the biomass. Reducing biomass to below 0.2 mm without pretreatment is difficult and costly because biomass is fibrous and compressible. Torrefaction is a promising thermal pretreatment process and has the advantages of increasing energy density, improving grindability, producing fuels with more homogenous compositions and hydrophobic behavior. Temperature is the most important factor for the torrefaction process. Biomass grindability is related to cell wall structure, thickness and composition. Thermal treatment such as torrefaction can cause chemical changes that significantly affect the strength of biomass. The objectives of this study are to understand the mechanism by which torrefaction improves the grindability of biomass and discuss suitable temperatures for thermal pretreatment for co-gasification/cofiring of biomass and coal. Wild cherry wood was selected as the model for this study. Samples were prepared by sawing a single tangential section from the heartwood and cutting it into eleven pieces. The samples were consecutively heated at 220, 260, 300, 350, 450 and 550oC for 0.5 hr under flowing nitrogen in a tube furnace. Untreated and treated samples were characterized for physical properties (color, dimensions and weight), microstructural changes by SEM, and cell wall composition changes and thermal behaviors by TGA and DSC. The morphology of the wood remained intact through the treatment range but the cell walls were thinner. Thermal treatments were observed to decompose the cell wall components. Hemicellulose decomposed over the range of ~200 to 300oC and resulted in weakening of the cell walls and subsequently improved grindability. Furthermore, wood samples treated above 300oC lost more than 39% in mass. Therefore, thermal pretreatment above the hemicelluloses decomposition temperature but below 300oC is probably sufficient to improve

  8. General Motors sidestream separator

    SciTech Connect

    Tessier, R.J.

    1981-01-01

    On February 15, 1980, the United States Environmental Protection Agency, acting pursuant to Paragraph 113(D) (4) of the Clean Air Act, issued to General Motors an innovative technology order covering fifteen coal-fired spreader-stoker boilers located at six General Motors plants in Ohio. The purpose and effect of this order was to permit General Motors time to develop a new, innovative technique for controlling particulate emissions from the specified boilers before compliance with the federally approved Ohio particulate control regulation was required. This new technology was christened, The Sidestream Separator, by General Motors. It provides a highly cost effective means of reducing particulate emissions below levels currently obtainable with conventionally used high efficiency mechanical collectors. These improvements could prove to be of substantial benefit to many industrial facilities with spreader-stoker coal-fired boilers that cannot be brought into compliance with applicble air pollution regulations except by application of far more expensive and unwieldly electrostatic precipitators (ESP's) or fabric filters (baghouses).

  9. Development and demonstration of a wood-fired gas turbine system

    SciTech Connect

    Smith, V.; Selzer, B.; Sethi, V.

    1993-08-01

    The objectives of the test program were to obtain some preliminary information regarding the nature of particulate and vapor phase alkali compounds produced and to assess any deleterious impact they might have on materials of construction. Power Generating Incorporated (PGI) is developing a wood-fired gas turbine system for specialized cogeneration applications. The system is based on a patented pressurized combustor designed and tested by PGI in conjunction with McConnell Industries. The other components of the system are fuel receiving, preparation, storage and feeding system, gas clean-up equipment, and a gas turbine generator.

  10. Nuclear Car Wash sensitivity in varying thicknesses of wood and steel cargo

    SciTech Connect

    Church, J; Slaughter, D; Asztalos, S; Biltoft, P; Descalle, M; Hall, J; Manatt, D; Mauger, J; Norman, E; Petersen, D; Prussin, S

    2006-10-05

    The influence of incident neutron attenuation on signal strengths in the Nuclear Car Wash has been observed experimentally for both wood and steel-pipe mock cargos. Measured decay curves are presented for {beta}-delayed high-energy {gamma}-rays and thermalized neutrons following neutron-induced fission of HEU through varying irradiation lengths. Error rates are extracted for delayed-{gamma} and delayed-n signals integrated to 30 seconds, assuming Gaussian distributions for the active background. The extrapolation to a field system of 1 mA deuterium current and to a 5 kg sample size is discussed.

  11. Constrained Generalized Supersymmetries

    SciTech Connect

    Toppan, Francesco; Kuznetsova, Zhanna

    2005-10-17

    We present a classification of admissible types of constraint (hermitian, holomorphic, with reality condition on the bosonic sectors, etc.) for generalized supersymmetries in the presence of complex spinors. A generalized supersymmetry algebra involving n-component real spinors Qa is given by the anticommutators {l_brace}Q{sub a},Q{sub b}{r_brace} = Z{sub ab} where the matrix Z appearing in the r.h.s. is the most general symmetric matrix. A complex generalized supersymmetry algebra is expressed in terms of complex spinors Qa and their complex conjugate Q* a. The most general (with a saturated r.h.s.) algebra is in this case given by {l_brace}Q{sub a},Q{sub b}{r_brace} P{sub ab}{l_brace}Q*{sub a}, Q*{sub b}{r_brace} = P*{sub ab}{l_brace}Q{sub a},Q*{sub b}{r_brace} = R{sub ab} where the matrix Pab is symmetric, while Rab is hermitian. The bosonic right hand side can be expressed in terms of the rank-k totally antisymmetric tensors P{sub ab} {sigma}k(C{gamma}{sub [{mu}}{sub 1...{mu}}{sub k]}){sub ab}P{sup [{mu}{sup 1...{mu}{sup k}]}.The decomposition in terms of anti-symmetric tensors for any space-time up to dimension D = 13 is presented. Real type, complex type, and quaternionic type space-times are classified. Any restriction on the saturated bosonic generators that allows all possible combinations of these tensors is in principle admissible by a Lorenz-covariant requirement. We investigate division algebra constraints and their influence on physical models. High spin theory models are presented as examples of the applications of such models.

  12. Generalized constructive tree weights

    SciTech Connect

    Rivasseau, Vincent E-mail: adrian.tanasa@ens-lyon.org; Tanasa, Adrian E-mail: adrian.tanasa@ens-lyon.org

    2014-04-15

    The Loop Vertex Expansion (LVE) is a quantum field theory (QFT) method which explicitly computes the Borel sum of Feynman perturbation series. This LVE relies in a crucial way on symmetric tree weights which define a measure on the set of spanning trees of any connected graph. In this paper we generalize this method by defining new tree weights. They depend on the choice of a partition of a set of vertices of the graph, and when the partition is non-trivial, they are no longer symmetric under permutation of vertices. Nevertheless we prove they have the required positivity property to lead to a convergent LVE; in fact we formulate this positivity property precisely for the first time. Our generalized tree weights are inspired by the Brydges-Battle-Federbush work on cluster expansions and could be particularly suited to the computation of connected functions in QFT. Several concrete examples are explicitly given.

  13. Office of Inspector General

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Office of Inspector General Office of Audits and Inspections Work Plan for FY 2013 Audits Central Audits Division  Ecotality  Funding Overlap  Follow-up on Smart Grid Investment Grant  DOE's Loan Program Office's Portfolio Management  Office of Fossil Energy's Regional Carbon Sequestration Partnerships  Advanced Manufacturing Office's Combined Heat and Power Systems  DOE's Management of Contaminated Non-EM Facilities  Unneeded Real Estate  Review of For-Profit Grantees

  14. General Employee Radiological Training

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    _______ Change Notice 1 June 2009 DOE HANDBOOK GENERAL EMPLOYEE RADIOLOGICAL TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Change 1 DOE-HDBK-1131-2007 Original Change Part 2 page 5 The average annual radiation dose to a

  15. General Employee Radiological Training

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOE HANDBOOK GENERAL EMPLOYEE RADIOLOGICAL TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-HDBK-1131-2007 iii Foreword This Handbook describes an implementation process for core training as recommended in chapter 14,

  16. General Employee Radiological Training

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Not Measurement Sensitive DOE-HDBK-1131-2007 December 2007_______ Change Notice 1 Reaffirmed 2013 DOE HANDBOOK GENERAL EMPLOYEE RADIOLOGICAL TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Change 1 DOE-HDBK-1131-2007 Original Change Part 2 page 5 The

  17. Research into the pyrolysis of pure cellulose, lignin, and birch wood flour in the China Lake entrained-flow reactor

    SciTech Connect

    Diebold, J.

    1980-06-01

    This experimental program used the China Lake entrained-flow pyrolysis reactor to briefly investigate the pyrolysis of pure cellulose, pure lignin, and birch wood flour. The study determined that the cellulose and wood flour do pyrolyze to produce primarily gaseous products containing significant amounts of ethylene and other useful hydrocarbons. During attempts to pyrolyze powdered lignin, the material melted and bubbled to block the reactor entrance. The pure cellulose and wood flour produced C/sub 2/ + yields of 12% to 14% by weight, which were less than yields from an organic feedstock derived from processed municipal trash. The char yields were 0.1% by weight from cellulose and 1.5% from birch wood flour - one to two orders of magnitude less than were produced from the trash-derived feedstock. In scanning electron microscope photographs, most of the wood flour char had a sintered and agglomerated appearance, although some particles retained the gross cell characteristics of the wood flour. The appearance of the char particles indicated that the material had once been molten and possibly vapor before it formed spheroidal particles about 1 ..mu..m diameter which agglomerated to form larger char particles. The ability to completely melt or vaporize lignocellulosic materials under conditions of high heating rates has now been demonstrated in a continuous flow reactor and promises new techniques for fast pyrolysis. This char was unexpectedly attracted by a magnet, presumably because of iron contamination from the pyrolysis reactor tube wall. The production of water-insoluble tars was negligible compared to the tars produced from trash-derived feedstock. The production of water-soluble organic materials was fairly low and qualitatively appeared to vary inversely with temperature. This study was of a preliminary nature and additional studies are necessary to optimize ethylene production from these feedstocks.

  18. Relation between combustion heat and chemical wood composition during white and brown rot

    SciTech Connect

    Dobry, J.; Dziurzynski, A.; Rypacek, V.

    1986-01-01

    Samples of beech and spruce wood were incubated with the white rot fungi Pleurotus ostreatus and Lentinus tigrinus and the brown rot fungi Fomitopsis pinicola and Serpula lacrymans (S. lacrimans) for four months. Decomposition (expressed as percent weight loss) and amounts of holocellulose, lignin, humic acids (HU), hymatomelanic acids (HY) and fulvo acids (FU) were determined and expressed in weight percent. Combustion heat of holocellulose and lignin was determined in healthy wood and in specimens where decomposition was greater than 50%. During white rot decomposition, combustion heat was unchanged even at high decomposition and the relative amounts of holocellulose and lignin remained the same. Total amounts of HU, HY and FU increased during the initial stages and stabilized at 20%. The content of HU plus HY was negligible even at the highest degree of decomposition. During brown rot decomposition, combustion heat was unchanged only in the initial stages, it increased continously with increasing rot. Lignin content was unchanged in the initial stages and increased after 30% weight loss. Total amounts of HU, HY and FU increased continuously, reaching higher values than in white rot decomposition; there were differences between the two species. Biosynthesis of HU plus HY began when weight loss reached 30%; there were differences in absolute and relative amounts between species. 24 references.

  19. The influence of the drying medium on high temperature convective drying of single wood chips

    SciTech Connect

    Johansson, A.; Rasmuson, A.

    1997-10-01

    High temperature convective drying of single wood chips with air and superheated steam respectively is studied theoretically. The two-dimensional model presented describes the coupled transport of water, vapor, air and heat. Transport mechanisms included are the convection of gas and liquid, intergas as well as bound water diffusion. In the initial part of the drying process, moisture is transported to the surface mainly due to capillary forces in the transversal direction where evaporation occurs. As the surface becomes dry, the drying front moves towards the center of the particle and an overpressure is simultaneously built up which affects the drying process. The differences between drying in air and steam respectively can be assigned to the physical properties of the drying medium. The period of constant drying rate which does not exist (or is very short) in air drying becomes more significant with decreasing amounts of air in the drying medium and is clearly visible in pure superheated steam drying. The maximal drying rate is larger in air drying, and shorter drying times are obtained since the heat flux to the wood chip particle increases with increasing amounts of air in the drying medium. The period of falling drying rate can be divided into two parts: in the first, the drying rate is dependent upon the humidity of the drying medium whereas in the second, there is no such correlation.

  20. The Influence of Process Conditions on the Chemical Composition of Pine Wood Catalytic Pyrolysis Oils

    DOE PAGES [OSTI]

    Pereira, J.; Agblevor, F. A.; Beis, S. H.

    2012-01-01

    Pine wood samples were used as model feedstock to study the properties of catalytic fast pyrolysis oils. The influence of two commercial zeolite catalysts (BASF and SudChem) and pretreatment of the pine wood with sodium hydroxide on pyrolysis products were investigated. The pyrolysis oils were first fractionated using column chromatography and characterized using GC-MS. Long chain aliphatic hydrocarbons, levoglucosan, aldehydes and ketones, guaiacols/syringols, and benzenediols were the major compounds identified in the pyrolysis oils. The catalytic pyrolysis increased the polycyclic hydrocarbons fraction. Significant decreases in phthalate derivatives using SudChem and long chain aliphatics using BASF catalyst were observed. Significant amountsmore » of aromatic heterocyclic hydrocarbons and benzene derivatives were formed, respectively, using BASF and SudChem catalysts. Guaiacyl/syringyl and benzenediols derivatives were partly suppressed by the zeolite catalysts, while the sodium hydroxide treatment enriched phenolic derivatives. Zeolite catalyst and sodium hydroxide were employed together; they showed different results for each catalyst.« less

  1. Steam-explosion pretreatment of wood: effect of chip size, acid, moisture content and pressure drop

    SciTech Connect

    Brownell, H.H.; Yu, E.K.C.; Saddler, J.N.

    1986-06-01

    Material balances for pentosan, lignin, and hexosan, during steam-explosion pretreatment of aspenwood, showed almost quantitative recovery of cellulose in the water-insoluble fraction. Dilute acid impregnation resulted in more selective hydrolysis of pentosan relative to undesirable pyrolysis, and gave a more accessible substrate for enzymatic hydrolysis. Thermocouple probes, located inside simulated aspenwood chips heated in 240 degrees C-saturated steam, showed rapid heating of air-dry wood, whereas green or impregnated wood heated slowly. Small chips, 3.2 mm in the fiber direction, whether green or air dry gave approximately equal rates of pentosan destruction and solubilization, and similar yields of glucose and of total reducing sugars on enzmatic hydrolysis with Trichoderma harzianum. Partial pyrolysis, destroying one-third of the pentosan of aspenwood at atmospheric pressure by dry steam at 276 degrees C, gave little increase in yield of reducing sugars on enzymatic hydrolysis. Treatment with saturated steam at 240 degrees C gave essentially the same yields of butanediol and ethanol on fermentation with Klebsiella pneumoniae, whether or not 80% of the steam was bled off before explosion and even if the chips remained intact, showing that explosion was unnecessary. 17 references.

  2. Effect of natural ageing on volume stability of MSW and wood waste incineration residues

    SciTech Connect

    Gori, Manuela; Bergfeldt, Britta; Reichelt, Jürgen; Sirini, Piero

    2013-04-15

    Highlights: ► Natural weathering on BA from MSW and wood waste incineration was evaluated. ► Type of mineral phases, pH and volume stability were considered. ► Weathering reactions effect in improved stability of the materials. - Abstract: This paper presents the results of a study on the effect of natural weathering on volume stability of bottom ash (BA) from municipal solid waste (MSW) and wood waste incineration. BA samples were taken at different steps of treatment (fresh, 4 weeks and 12 weeks aged) and then characterised for their chemical and mineralogical composition and for volume stability by means of the mineralogical test method (M HMVA-StB), which is part of the German quality control system for using aggregates in road construction (TL Gestein-StB 04). Changes of mineralogical composition with the proceeding of the weathering treatment were also monitored by leaching tests. At the end of the 12 weeks of treatment, almost all the considered samples resulted to be usable without restrictions in road construction with reference to the test parameter volume stability.

  3. Thermal Impact of Fasteners in High-Performance Wood-Framed Walls: Preprint

    SciTech Connect

    Christensen, D.

    2011-01-01

    Buildings are heavy consumers of energy, and residential building design is rapidly addressing topics to maximize energy conservation en route to net-zero energy consumption. Annual energy analysis of a building informs the choice among disparate energy measures, for cost, durability, occupant comfort, and whole-house energy use. Physics-based and empirical models of elements of a building are used in such analyses. High-performance wood-framed walls enable builders to construct homes that use much less than 40% of the energy consumed by similar homes built to minimum code. Modeling for these walls has considered physical features such as framing factor, insulation and framing properties, roughness and convective effects, and air leakage. The thermal effects of fasteners used to construct these walls have not been fully evaluated, even though their thermal conductivity is orders of magnitudes higher than that of other building materials. Drywall screws and siding nails are considered in this finite element thermal conductivity analysis of wall sections that represent wood-framed walls that are often used in high-performance homes. Nails and screws reduce even the best walls' insulating performance by approximately 3% and become increasingly significant as the framing factor increases.

  4. Method of regulating the amount of underfire air for combustion of wood fuels in spreader-stroke boilers

    DOEpatents

    Tuttle, Kenneth L.

    1980-01-01

    A method of metering underfire air for increasing efficiency and reducing particulate emissions from wood-fire, spreader-stoker boilers is disclosed. A portion of the combustion air, approximately one pound of air per pound of wood, is fed through the grate into the fuel bed, while the remainder of the combustion air is distributed above the fuel in the furnace, and the fuel bed is maintained at a depth sufficient to consume all oxygen admitted under fire and to insure a continuous layer of fresh fuel thereover to entrap charred particles inside the fuel bed.

  5. Wood energy and preservation of woodlands in semi-arid developing countries. The case of Dodoma region, Tanzania

    SciTech Connect

    Allen, J.C.

    1985-01-01

    At present little land and labour resources are expended on energy production, but the woodlands in Dodoma are disappearing, causing villagers to save time by switching from fuelwood collected on foot to charcoal shipped in by truck. Results of a linear program show that if the costs of growing the wood for charcoal are counted the switch to charcoal saves time only in areas where population is relatively dense and natural woodland remote. Woodland preservation in Dodoma will require more plantations, increased plantation productivity, improved efficiency of charcoal kilns or stoves and ultimately a switch to some other fuel than wood.

  6. GENERAL PRINCIPLES OF AGREEMENT

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    PRINCIPLES OF AGREEMENT HWB-14-20 and HWB-14-21 These General Principles of Agreement ("Principles of Agreement") are agreed upon by the New Mexico Environment Department ("NMED"), and the United States Department of Energy ("DOE"), Los Alamos National Security, LLC ("LANS"), and Nuclear Waste Partnership, LLC ("NWP") (collectively, with DOE and LANS, the "DOE Permittees") for the purpose of resolving Compliance Order Nos. HWB-14- 20

  7. General Motors | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Motors Jump to: navigation, search Name: General Motors Place: Detroit, MI Website: www.generalmotors.com References: General Motors1 Information About Partnership with NREL...

  8. Generalized conjugate gradient squared

    SciTech Connect

    Fokkema, D.R.; Sleijpen, G.L.G.

    1994-12-31

    In order to solve non-symmetric linear systems of equations, the Conjugate Gradient Squared (CGS) is a well-known and widely used iterative method. In practice the method converges fast, often twice as fast as the Bi-Conjugate Gradient method. This is what you may expect, since CGS uses the square of the BiCG polynomial. However, CGS may suffer from its erratic convergence behavior. The method may diverge or the approximate solution may be inaccurate. BiCGSTAB uses the BiCG polynomial and a product of linear factors in an attempt to smoothen the convergence. In many cases, this has proven to be very effective. Unfortunately, the convergence of BiCGSTAB may stall when a linear factor (nearly) degenerates. BiCGstab({ell}) is designed to overcome this degeneration of linear factors. It generalizes BiCGSTAB and uses both the BiCG polynomial and a product of higher order factors. Still, CGS may converge faster than BiCGSTAB or BiCGstab({ell}). So instead of using a product of linear or higher order factors, it may be worthwhile to look for other polynomials. Since the BiCG polynomial is based on a three term recursion, a natural choice would be a polynomial based on another three term recursion. Possibly, a suitable choice of recursion coefficients would result in method that converges faster or as fast as CGS, but less erratic. It turns out that an algorithm for such a method can easily be formulated. One particular choice for the recursion coefficients leads to CGS. Therefore one could call this algorithm generalized CGS. Another choice for the recursion coefficients leads to BiCGSTAB. It is therefore possible to mix linear factors and some polynomial based on a three term recursion. This way one may get the best of both worlds. The authors will report on their findings.

  9. Insight into trade-off between wood decay and parasitism from the genome of a fungal forest pathogen

    SciTech Connect

    Olson, Ake; Aerts, Andrea; Asiegbu, Fred; Belbahri, Lassaad; Bouzid, Ourdia; Broberg, Anders; Canback, Bjorn; Coutinho, Pedro M.; Cullen, Dan; Dalman, Kerstin; Deflorio, Giuliana; van Diepen, Linda T. A.; Dunand, Christophe; Duplessis, Sebastien; Durling, Mikael; Gonthier, Paolo; Grimwood, Jane; Fossdal, Carl Gunnar; Hansson, David; Henrissat, Bernard; Hietala, Ari; Himmelstrand, Kajsa; Hoffmeister, Dirk; Hogberg, Nils; James, Timothy Y.; Karlsson, Magnus; Kohler, Annegret; Lucas, Susan; Lunden, Karl; Morin, Emmanuelle; Murat, Claude; Park, Jongsun; Raffaello, Tommaso; Rouze, Pierre; Salamov, Asaf; Schmutz, Jeremy; Solheim, Halvor; Stahlberg, Jerry; Velez, Heriberto; de Vries, Ronald P.; Wiebenga, Ad; Woodward, Steve; Yakovlev, Igor; Garbelotto, Matteo; Martin, Francis; Grigoriev, Igor V.; Stenlid, Jan

    2012-01-01

    Parasitism and saprotrophic wood decay are two fungal strategies fundamental for succession and nutrient cycling in forest ecosystems. An opportunity to assess the trade-off between these strategies is provided by the forest pathogen and wood decayer Heterobasidion annosum sensu lato. We report the annotated genome sequence and transcript profiling, as well as the quantitative trait loci mapping, of one member of the species complex: H. irregulare. Quantitative trait loci critical for pathogenicity, and rich in transposable elements, orphan and secreted genes, were identified. A wide range of cellulose-degrading enzymes are expressed during wood decay. By contrast, pathogenic interaction between H. irregulare and pine engages fewer carbohydrate-active enzymes, but involves an increase in pectinolytic enzymes, transcription modules for oxidative stress and secondary metabolite production. Our results show a trade-off in terms of constrained carbohydrate decomposition and membrane transport capacity during interaction with living hosts. Our findings establish that saprotrophic wood decay and necrotrophic parasitism involve two distinct, yet overlapping, processes.

  10. Analysis of the Phlebiopsis gigantea Genome, Transcriptome and Secretome Provides Insight into Its Pioneer Colonization Strategies of Wood

    DOE PAGES [OSTI]

    Hori, Chiaki; Ishida, Takuya; Igarashi, Kiyohiko; Samejima, Masahiro; Suzuki, Hitoshi; Master, Emma; Ferreira, Patricia; Ruiz-Dueñas, Francisco J.; Held, Benjamin; Canessa, Paulo; et al

    2014-12-04

    Collectively classified as white-rot fungi, certain basidiomycetes efficiently degrade the major structural polymers of wood cell walls. A small subset of these Agaricomycetes, exemplified by Phlebiopsis gigantea, is capable of colonizing freshly exposed conifer sapwood despite its high content of extractives, which retards the establishment of other fungal species. The mechanism(s) by which P. gigantea tolerates and metabolizes resinous compounds have not been explored. Here, we report the annotated P. gigantea genome and compare profiles of its transcriptome and secretome when cultured on freshcut versus solvent-extracted loblolly pine wood. The P. gigantea genome contains a conventional repertoire of hydrolase genesmore » involved in cellulose/hemicellulose degradation, whose patterns of expression were relatively unperturbed by the absence of extractives. The expression of genes typically ascribed to lignin degradation was also largely unaffected. In contrast, genes likely involved in the transformation and detoxification of wood extractives were highly induced in its presence. Their products included an ABC transporter, lipases, cytochrome P450s, glutathione S-transferase and aldehyde dehydrogenase. Other regulated genes of unknown function and several constitutively expressed genes are also likely involved in P. gigantea’s extractives metabolism. These results contribute to our fundamental understanding of pioneer colonization of conifer wood and provide insight into the diverse chemistries employed by fungi in carbon cycling processes.« less

  11. Analysis of the Phlebiopsis gigantea Genome, Transcriptome and Secretome Provides Insight into Its Pioneer Colonization Strategies of Wood

    SciTech Connect

    Hori, Chiaki; Ishida, Takuya; Igarashi, Kiyohiko; Samejima, Masahiro; Suzuki, Hitoshi; Master, Emma; Ferreira, Patricia; Ruiz-Dueñas, Francisco J.; Held, Benjamin; Canessa, Paulo; Larrondo, Luis F.; Schmoll, Monika; Druzhinina, Irina S.; Kubicek, Christian P.; Gaskell, Jill A.; Kersten, Phil; St. John, Franz; Glasner, Jeremy; Sabat, Grzegorz; Splinter BonDurant, Sandra; Syed, Khajamohiddin; Yadav, Jagjit; Mgbeahuruike, Anthony C.; Kovalchuk, Andriy; Asiegbu, Fred O.; Lackner, Gerald; Hoffmeister, Dirk; Rencoret, Jorge; Gutiérrez, Ana; Sun, Hui; Lindquist, Erika; Barry, Kerrie; Riley, Robert; Grigoriev, Igor V.; Henrissat, Bernard; Berka, Randy M.; Martínez, Angel T.; Covert, Sarah F.; Blanchette, Robert A.; Cullen, Daniel; Copenhaver, Gregory P.

    2014-12-04

    Collectively classified as white-rot fungi, certain basidiomycetes efficiently degrade the major structural polymers of wood cell walls. A small subset of these Agaricomycetes, exemplified by Phlebiopsis gigantea, is capable of colonizing freshly exposed conifer sapwood despite its high content of extractives, which retards the establishment of other fungal species. The mechanism(s) by which P. gigantea tolerates and metabolizes resinous compounds have not been explored. Here, we report the annotated P. gigantea genome and compare profiles of its transcriptome and secretome when cultured on freshcut versus solvent-extracted loblolly pine wood. The P. gigantea genome contains a conventional repertoire of hydrolase genes involved in cellulose/hemicellulose degradation, whose patterns of expression were relatively unperturbed by the absence of extractives. The expression of genes typically ascribed to lignin degradation was also largely unaffected. In contrast, genes likely involved in the transformation and detoxification of wood extractives were highly induced in its presence. Their products included an ABC transporter, lipases, cytochrome P450s, glutathione S-transferase and aldehyde dehydrogenase. Other regulated genes of unknown function and several constitutively expressed genes are also likely involved in P. gigantea’s extractives metabolism. These results contribute to our fundamental understanding of pioneer colonization of conifer wood and provide insight into the diverse chemistries employed by fungi in carbon cycling processes.

  12. Methanol production from Eucalyptus wood chips. Working document I. The Florida Eucalyptus energy farm: silvicultural methods and considerations

    SciTech Connect

    Fishkind, H.H.

    1982-04-01

    The silvicultural matrix within which the nation's first large scale wood energy plantation will develop is described in detail. The relevant literature reviewed is identified and distilled. The plantation history, site preparation, planting, species selection, maintenance and management, harvesting, and the Eucalyptus biomass production estimates are presented.

  13. Measurement of wood/plant cell or composite material attributes with computer assisted tomography

    DOEpatents

    West, Darrell C.; Paulus, Michael J.; Tuskan, Gerald A.; Wimmer, Rupert

    2004-06-08

    A method for obtaining wood-cell attributes from cellulose containing samples includes the steps of radiating a cellulose containing sample with a beam of radiation. Radiation attenuation information is collected from radiation which passes through the sample. The source is rotated relative to the sample and the radiation and collecting steps repeated. A projected image of the sample is formed from the collected radiation attenuation information, the projected image including resolvable features of the cellulose containing sample. Cell wall thickness, cell diameter (length) and cell vacoule diameter can be determined. A system for obtaining physical measures from cellulose containing samples includes a radiation source, a radiation detector, and structure for rotating the source relative to said sample. The system forms an image of the sample from the radiation attenuation information, the image including resolvable features of the sample.

  14. Reservoir characterization and performance predictions for the E.N. Woods lease

    SciTech Connect

    Aka-Milan, Francis A.

    2000-07-07

    The task of this work was to evaluate the past performance of the E.N. WOODS Unit and to forecast its future economic performance by taking into consideration the geology, petrophysics and production history of the reservoir. The Decline Curve Analysis feature of the Appraisal of Petroleum Properties including Taxation Systems (EDAPT) software along with the Production Management Systems (PMS) software were used to evaluate the original volume of hydrocarbon in place and estimate the reserve. The Black Oil Simulator (BOAST II) was then used to model the waterflooding operation and estimate the incremental oil production attributable to the water injection. BOAST II was also used to predict future performance of the reservoir.

  15. Production of green aromatics and olefins by catalytic fast pyrolysis of wood sawdust

    SciTech Connect

    Carlson, Torren R.; Cheng, Yu-Ting; Jae, Jungho; Huber, George W.

    2011-10-26

    Catalytic fast pyrolysis of pine wood sawdust and furan (a model biomass compound) with ZSM-5 based catalysts was studied with three different reactors: a bench scale bubbling fluidized bed reactor, a fixed bed reactor and a semi-batch pyroprobe reactor. The highest aromatic yield from sawdust of 14% carbon in the fluidized bed reactor was obtained at low biomass weight hourly space velocities (less than 0.5 h-1) and high temperature (600 °C). Olefins (primarily ethylene and propylene) were also produced with a carbon yield of 5.4% carbon. The biomass weight hourly space velocity and the reactor temperature can be used to control both aromatic yield and selectivity. At low biomass WHSV the more valuable monocyclic aromatics are produced and the formation of less valuable polycyclic aromatics is inhibited. Lowering the reaction temperature also results in more valuable monocyclic aromatics. The olefins produced during the reaction can be recycled to the reactor to produce additional aromatics. Propylene is more reactive than ethylene. Co-feeding propylene to the reactor results in a higher aromatic yield in both continuous reactors and higher conversion of the intermediate furan in the fixed bed reactor. When olefins are recycled aromatic yields from wood of 20% carbon can be obtained. After ten reaction–regeneration cycles there were metal impurities deposited on the catalyst, however, the acid sites on the zeolite are not affected. Of the three reactors tested the batch pyroprobe reactor yielded the most aromatics, however, the aromatic product is largely naphthalene. The continuous reactors produce less naphthalene and the sum of aromatics plus olefin products is higher than the pyroprobe reactor.

  16. Fate of Cu, Cr, and As during combustion of impregnated wood with and without peat additive

    SciTech Connect

    Karin Lundholm; Dan Bostroem; Anders Nordin; Andrei Shchukarev

    2007-09-15

    The EU Directive on incineration of waste regulates the harmful emissions of particles and twelve toxic elements, including copper, chromium, and arsenic. Using a 15 kW pellets-fueled grate burner, experiments were performed to determine the fate of copper, chromium, and arsenic during combustion of chromate copper arsenate (CCA) preservative wood. The fate and speciation of copper, chromium, and arsenic were determined from analysis of the flue gas particles and the bottom ash using SEM-EDS, XRD, XPS, and ICP-AES. Chemical equilibrium model calculations were performed to interpret the experimental findings. The results revealed that about 5% copper, 15% chromium, and 60% arsenic were volatilized during combustion of pure CCA-wood, which is lower than predicted volatilization from the individual arsenic, chromium, and copper oxides. This is explained by the formation of more stable refractory complex oxide phases for which the stability trends and patterns are presented. When co-combusted with peat, an additional stabilization of these phases was obtained and thus a small but noteworthy decrease in volatilization of all three elements was observed. The major identified phases for all fuels were CuCrO{sub 2}(s), (Fe,Mg,Cu)(Cr,Fe,Al)O{sub 4}(s), Cr{sub 2}O{sub 3}(s), and Ca{sub 3}(AsO{sub 4}){sub 2}(s). Arsenic was also identified in the fine particles as KH{sub 2}AsO{sub 4}(s) and As{sub 2}O{sub 3}). A strong indication of hexavalent chromium in the form of K{sub 2}CrO{sub 4} or as a solid solution between K{sub 3}Na(CrO{sub 4}){sub 2} and K{sub 3}Na(SO{sub 4}){sub 2} was found in the fine particles. Good qualitative agreement was observed between experimental data and chemical equilibrium model calculations. 38 refs., 6 figs., 2 tabs.

  17. Title 1 General Provisions Chapter 5 Common Law; General Rights...

    OpenEI (Open Energy Information) [EERE & EIA]

    General Provisions Chapter 5 Common Law; General Rights 3 V.S.A. Section 2809 Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute:...

  18. Research Laboratories General Motors Corporation General Motors Technical Center

    Office of Legacy Management (LM)

    . MI. 1-q Research Laboratories General Motors Corporation General Motors Technical Center Warren, Michigan 48090 January 21, 1977 Occupational Health Standards Branch Office of Standards Development U. S. Nuclear Requlatory Commission Washington, D.C. 20555 Attention: Mr. Robert E. Alexander, Chief Dear Mr. Alexander: In 1974, General Motors Corporation acquired a manufacturing plant in Adrian, Michigan. On October 21, 1976, General Motors announced that work would begin immediately to prepare

  19. Life history and habitat associations of the broad wood cockroach, Parcoblatta lata (Blattaria: Blattellidae) and other native cockroaches in the Coastal Plain of South Carolina.

    SciTech Connect

    Horn, Scott; Hanula, James, L.

    2002-06-18

    Wood cockroaches are an important prey of the red-cockaded woodpecker, Picoides borealis, an endangered species inhabiting pine forests in the southern United States. These woodpeckers forage on the boles of live pine trees, but their prey consists of a high proportion of wood cockroaches, Parcoblatta spp., that are more commonly associated with dead plant material. Cockroach population density samples were conducted on live pine trees, dead snags and coarse woody debris on the ground. The studies showed that snags and logs are also important habitats of wood cockroaches in pine forests.

  20. Superfund record of decision (EPA Region 8): Smeltertown Site, Operable Unit 2, former Koppers Wood Treating site, Salida, CO, June 4, 1998

    SciTech Connect

    1998-10-01

    This decision document presents the selected remedial action (RA) for the former Koppers Wood Treating Operable Unit (OU2) at the Smeltertown Superfund Site (the Site). This action addresses the wood-treating contaminants from the tie treating operations at the former Koppers Wood Treating Operable Unit that were conducted by Koppers Company, Inc. (now known as Beazer East, Inc.) from 1924 through 1953. This remedy calls for the containment of soils contaminated at low levels and monitors the effect of the contaminants in the soils, dissolved polycyclic aromatic hydrocarbon (PAHs) and dense non-aqueous phase liquids (DNAPL) within the groundwater.

  1. Final Report: Development of Renewable Microbial Polyesters for Cost Effective and Energy- Efficient Wood-Plastic Composites

    SciTech Connect

    Thompson, David N.; Emerick, Robert W.; England, Alfred B.; Flanders, James P.; Loge, Frank J.; Wiedeman, Katherine A.; Wolcott, Michael P.

    2010-03-31

    In this project, we proposed to produce wood fiber reinforced thermoplastic composites (WFRTCs) using microbial thermoplastic polyesters in place of petroleum-derived plastic. WFRTCs are a rapidly growing product area, averaging a 38% growth rate since 1997. Their production is dependent on substantial quantities of petroleum based thermoplastics, increasing their overall energy costs by over 230% when compared to traditional Engineered Wood Products (EWP). Utilizing bio-based thermoplastics for these materials can reduce our dependence on foreign petroleum. We have demonstrated that biopolymers (polyhydroxyalkanoates, PHA) can be successfully produced from wood pulping waste streams and that viable wood fiber reinforced thermoplastic composite products can be produced from these materials. The results show that microbial polyester (PHB in this study) can be extruded together with wastewater-derived cell mass and wood flour into deck products having performance properties comparable to existing commercial HDPE/WF composite products. This study has thus proven the underlying concept that the microbial polyesters produced from waste effluents can be used to make cost-effective and energy-efficient wood-plastic composites. The cost of purified microbial polyesters is about 5-20 times that of HDPE depending on the cost of crude oil, due to high purification (40%), carbon substrate (40%) and sterilized fermentation (20%) costs for the PHB. Hence, the ability to produce competitive and functional composites with unpurified PHA-biomass mixtures from waste carbon sources in unsterile systems—without cell debris removal—is a significant step forward in producing competitive value-added structural composites from forest products residuals using a biorefinery approach. As demonstrated in the energy and waste analysis for the project, significant energy savings and waste reductions can also be realized using this approach. We recommend that the next step for development of

  2. General Atomics (GA) | Princeton Plasma Physics Lab

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    General Atomics (GA) Subscribe to RSS - General Atomics (GA) General Atomics Image: General Atomics (GA) The Scorpion's Strategy: "Catch and Subdue" Read more about The Scorpion's...

  3. Building America Case Study: Retrofit Measure for Embedded Wood Members in Insulated Mass Masonry Walls, Lawrence, Massachusetts

    SciTech Connect

    2015-10-01

    ?There are many existing buildings with load-bearing mass masonry walls, whose energy performance could be improved with the retrofit of insulation. However, adding insulation to the interior side of walls of such masonry buildings in cold (and wet) climates may cause performance and durability problems. Some concerns, such as condensation and freeze-thaw have known solutions. But wood members embedded in the masonry structure will be colder (and potentially wetter) after an interior insulation retrofit. Moisture content and relative humidity were monitored at joist ends in historic mass brick masonry walls retrofitted with interior insulation in a cold climate (Zone 5A); data were collected from 2012-2015. Eleven joist ends were monitored in all four orientations. One limitation of these results is that the renovation is still ongoing, with limited wintertime construction heating and no permanent occupancy to date. Measurements show that many joists ends remain at high moisture contents, especially at north- and east-facing orientations, with constant 100 percent RH conditions at the worst cases. These high moisture levels are not conducive for wood durability, but no evidence for actual structural damage has been observed. Insulated vs. non-insulated joist pockets do not show large differences. South facing joists have safe (10-15 percent) moisture contents. Given the uncertainty pointed out by research, definitive guidance on the vulnerability of embedded wood members is difficult to formulate. In high-risk situations, or when a very conservative approach is warranted, the embedded wood member condition can be eliminated entirely, supporting the joist ends outside of the masonry pocket.

  4. Cell Wall Ultrastructure of Stem Wood, Roots, and Needles of a Conifer Varies in Response to Moisture Availability

    DOE PAGES [OSTI]

    Pattathil, Sivakumar; Ingwers, Miles W.; Victoriano, Olivia L.; Kandemkavil, Sindhu; McGuire, Mary Anne; Teskey, Robert O.; Aubrey, Doug P.

    2016-06-24

    The composition, integrity, and architecture of the macromolecular matrix of cell walls, collectively referred to as cell wall ultrastructure, exhibits variation across species and organs and among cell types within organs. Indirect approaches have suggested that modifications to cell wall ultrastructure occur in response to abiotic stress; however, modifications have not been directly observed. Glycome profiling was used to study cell wall ultrastructure by examining variation in composition and extractability of non-cellulosic glycans in cell walls of stem wood, roots, and needles of loblolly pine saplings exposed to high and low soil moisture. Soil moisture influenced physiological processes and themore » overall composition and extractability of cell wall components differed as a function of soil moisture treatments. The strongest response of cell wall ultrastructure to soil moisture was increased extractability of pectic backbone epitopes in the low soil moisture treatment. The higher abundance of these pectic backbone epitopes in the oxalate extract indicate that the loosening of cell wall pectic components could be associated with the release of pectic signals as a stress response. The increased extractability of pectic backbone epitopes in response to low soil moisture availability was more pronounced in stem wood than in roots or needles. Additional responses to low soil moisture availability were observed in lignin associated carbohydrates released in chlorite extracts of stem wood, including an increased abundance of pectic arabinogalactan epitopes. Overall, these results indicate that cell walls of loblolly pine organs undergo changes in their ultrastructural composition and extractability as a response to soil moisture availability and that cell walls of the stem wood are more responsive to low soil moisture availability compared to cell walls of roots and needles. In conclusion, to our knowledge, this is the first direct evidence, delineated by

  5. Effectiveness of purging on preventing gas emission buildup in wood pellet storage

    DOE PAGES [OSTI]

    Yazdanpanah, Fahimeh; Sokhansanj, Shahab; Lim, Choon Jim; Lau, Anthony; Bi, Xiaotao

    2015-04-24

    Storage of wood pellets has resulted in deadly accidents in connection with off-gassing and self-heating. A forced ventilation system should be in place to sweep the off-gases and control the thermal conditions. In this study, multiple purging tests were conducted in a pilot scale silo to evaluate the effectiveness of a purging system and quantify the time and volume of the gas needed to sweep the off-gases. To identify the degree of mixing, residence time distribution of the tracer gas was also studied experimentally. Large deviations from plug flow suggested strong gas mixing for all superficial velocities. As the velocitymore » increased, the system dispersion number became smaller, which indicated less degree of mixing with increased volume of the purging gas. Finally, one-dimensional modelling and numerical simulation of the off-gas concentration profile gave the best agreement with the measured gas concentration at the bottom and middle of the silo.« less

  6. Development of laboratory studies on the off-gassing of wood pellets

    SciTech Connect

    Jaya Shankar Tumuluru; Xingya Kuang; Shahab Sokhansanj; C. Jim Lim; Tony Bi; Staffan Melin

    2010-12-01

    In the present study three sealed containers (304.8 mm inside diameter and 609.6 mm height) were developed to investigate the concentration of off-gases accumulated in the headspace as well as changes in some of the physical properties of wood pellets during storage. Pellets occupied 75% of the container volume leaving 25% headspace. The outside wall of the steel containers was wrapped with electric heating tapes and fiber glass insulation. The storage studies were carried out at room temperature of about 22 degrees C and at elevated temperatures of 30, 40 and 50 degrees C. The off-gases were collected and analyzed using micro gas chromatography. The accumulations of CO (5000 ppmv) and CO2 (10000 ppmv) were relatively high at room temperature of about 22 degrees C for a storage period of 24 days. These accumulations increased sharply at storage temperatures greather than 30 degrees C. At 50 degrees C, the maximum measured concentration of CO, CO2 and CH4 was about17,000, 70,000 and 3,000 ppmv, respectively. Storage temperature had a significanteffect (PB0.01) on all of the pellet properties, including pellet durability, which dropped by about 20% at the end of 60 days of storage.

  7. Gasoline from Wood via Integrated Gasification, Synthesis, and Methanol-to-Gasoline Technologies

    SciTech Connect

    Phillips, S. D.; Tarud, J. K.; Biddy, M. J.; Dutta, A.

    2011-01-01

    This report documents the National Renewable Energy Laboratory's (NREL's) assessment of the feasibility of making gasoline via the methanol-to-gasoline route using syngas from a 2,000 dry metric tonne/day (2,205 U.S. ton/day) biomass-fed facility. A new technoeconomic model was developed in Aspen Plus for this study, based on the model developed for NREL's thermochemical ethanol design report (Phillips et al. 2007). The necessary process changes were incorporated into a biomass-to-gasoline model using a methanol synthesis operation followed by conversion, upgrading, and finishing to gasoline. Using a methodology similar to that used in previous NREL design reports and a feedstock cost of $50.70/dry ton ($55.89/dry metric tonne), the estimated plant gate price is $16.60/MMBtu ($15.73/GJ) (U.S. $2007) for gasoline and liquefied petroleum gas (LPG) produced from biomass via gasification of wood, methanol synthesis, and the methanol-to-gasoline process. The corresponding unit prices for gasoline and LPG are $1.95/gallon ($0.52/liter) and $1.53/gallon ($0.40/liter) with yields of 55.1 and 9.3 gallons per U.S. ton of dry biomass (229.9 and 38.8 liters per metric tonne of dry biomass), respectively.

  8. System Modeling of ORNL s 20 MW(t) Wood-fired Gasifying Boiler

    SciTech Connect

    Daw, C Stuart; FINNEY, Charles E A; Wiggins, Gavin; Hao, Ye

    2010-01-01

    We present an overview of the new 20 MW(t) wood-fired steam plant currently under construction by Johnson Controls, Inc. at the Oak Ridge National Laboratory in Tennessee. The new plant will utilize a low-temperature air-blown gasifier system developed by the Nexterra Systems Corporation to generate low-heating value syngas (producer gas), which will then be burned in a staged combustion chamber to produce heat for the boiler. This is considered a showcase project for demonstrating the benefits of clean, bio-based energy, and thus there is considerable interest in monitoring and modeling the energy efficiency and environmental footprint of this technology relative to conventional steam generation with petroleum-based fuels. In preparation for system startup in 2012, we are developing steady-state and dynamic models of the major process components, including the gasifiers and combustor. These tools are intended to assist in tracking and optimizing system performance and for carrying out future conceptual studies of process changes that might improve the overall energy efficiency and sustainability. In this paper we describe the status of our steady-state gasifier and combustor models and illustrate preliminary results from limited parametric studies.

  9. General Biodiesel | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Biodiesel Jump to: navigation, search Name: General Biodiesel Address: 4034 West Marginal Way Place: Seattle, Washington Zip: 98106 Region: Pacific Northwest Area Sector: Biofuels...

  10. Singularities of Generalized Parton Distributions

    SciTech Connect

    Anatoly Radyushkin

    2012-05-14

    The basic ideas of the theory of Generalized Parton Distributions (GPDs) are reviewed. Recent developments in the study of singularities of GPDs are discussed.

  11. General Atomics | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Product: General Atomics offers research, development and consulting services to the nuclear industry, including nuclear energy production, manufacturing, defense and related...

  12. AES Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ...13) Exhibit A General Conditions Page 7 of 18 and skilled ... shall, to the extent permissible under ... directly or indirectly causes an increase or decrease in ...

  13. SFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... shall, to the extent permissible under ... A General Conditions Page 8 of 18 omission of CONTRACTOR or GOVERNMENT, directly or indirectly causes an increase or ...

  14. SFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... shall, to the extent permissible under ... A General Conditions Page 8 of 19 omission of CONTRACTOR or GOVERNMENT, directly or indirectly causes an increase or ...

  15. AES Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ...615) Exhibit A General Conditions Page 7 of 21 and skilled ... shall, to the extent permissible under ... directly or indirectly causes an increase or decrease in ...

  16. EFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    1, 4/9/13) Exhibit A General Conditions Page 1 of 39 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2012) .......................................................................................................... 3 GC-2 AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Apr 2013) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  17. SFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    1, 4/9/13) Exhibit A General Conditions Page 1 of 29 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2012) .......................................................................................................... 3 GC-2A AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Jan 2010) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  18. SFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2, 6/14/13) Exhibit A General Conditions Page 1 of 16 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2012) .......................................................................................................... 3 GC-2A AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Jan 2010) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  19. AES Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    1, 4/9/13) Exhibit A General Conditions Page 1 of 31 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2012) .......................................................................................................... 3 GC-2A AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Jan 2010) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  20. AES Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2, 3/6/15) Exhibit A General Conditions Page 1 of 8 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1C DEFINITIONS (Jun 2010) ........................................................................................................... 2 GC-6C ORDER OF PRECEDENCE (Mar 2012) .................................................................................... 2 GC-8B COMPLIANCE WITH LAWS, RULES, REGULATIONS AND STANDARDS (Jun 2010) .......... 2 GC-11 NEW MEXICO GROSS

  1. LFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    1, 4/9/13) Exhibit A General Conditions Page 1 of 31 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2012) .......................................................................................................... 3 GC-2A AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Jan 2010) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  2. LFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2, 6/14/13) Exhibit A General Conditions Page 1 of 19 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2012) .......................................................................................................... 3 GC-2A AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Jan 2010) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  3. LFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    5, 3/6/15) Exhibit A General Conditions Page 1 of 22 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2014) .......................................................................................................... 3 GC-2A AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Jan 2010) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  4. LFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    4, 9/26/14) Exhibit A General Conditions Page 1 of 22 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2014) .......................................................................................................... 3 GC-2A AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Jan 2010) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  5. CPFFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    1, 4/9/13) Exhibit A General Conditions Page 1 of 33 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2012) .......................................................................................................... 3 GC-2A AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Jan 2010) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  6. CPFFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2, 6/14/13) Exhibit A General Conditions Page 1 of 20 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2012) .......................................................................................................... 3 GC-2A AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Jan 2010) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  7. CPFFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    5, 3/6/15) Exhibit A General Conditions Page 1 of 29 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2014) .......................................................................................................... 3 GC-2A AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Jan 2010) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  8. CPFFS Exhibit A General Conditions

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    4, 9/26/14) Exhibit A General Conditions Page 1 of 29 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2014) .......................................................................................................... 3 GC-2A AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Jan 2010) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  9. High-temperature aerosol formation in wood pellets flames: Spatially resolved measurements

    SciTech Connect

    Wiinikka, Henrik; Gebart, Rikard; Boman, Christoffer; Bostroem, Dan; Nordin, Anders; OEhman, Marcus

    2006-12-15

    The formation and evolution of high-temperature aerosols during fixed bed combustion of wood pellets in a realistic combustion environment were investigated through spatially resolved experiments. The purpose of this work was to investigate the various stages of aerosol formation from the hot flame zone to the flue gas channel. The investigation is important both for elucidation of the formation mechanisms and as a basis for development and validation of particle formation models that can be used for design optimization. Experiments were conducted in an 8-kW-updraft fired-wood-pellets combustor. Particle samples were withdrawn from the centerline of the combustor through 10 sampling ports by a rapid dilution sampling probe. The corresponding temperatures at the sampling positions were in the range 200-1450{sup o}C. The particle sample was size-segregated in a low-pressure impactor, allowing physical and chemical resolution of the fine particles. The chemical composition of the particles was investigated by SEM/EDS and XRD analysis. Furthermore, the experimental results were compared to theoretical models for aerosol formation processes. The experimental data show that the particle size distribution has two peaks, both of which are below an aerodynamic diameter of 2.5 {mu}m (PM{sub 2.5}). The mode diameters of the fine and coarse modes in the PM{sub 2.5} region were {approx}0.1 and {approx}0.8 {mu}m, respectively. The shape of the particle size distribution function continuously changes with position in the reactor due to several mechanisms. Early, in the flame zone, both the fine mode and the coarse mode in the PM{sub 2.5} region were dominated by particles from incomplete combustion, indicated by a significant amount of carbon in the particles. The particle concentrations of both the fine and the coarse mode decrease rapidly in the hot oxygen-rich flame due to oxidation of the carbon-rich particles. After the hot flame, the fine mode concentration and particle

  10. No Slide Title

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Counsel Steven P. Croley Deputy General Counsel Eric J. Fygi GC-01 Deputy General Counsel Energy Policy Samuel T. Walsh GC-70 Assistant General Counsel Civilian Nuclear Programs James B. McRae GC-72 Assistant General Counsel Electricity and Fossil Energy Steven A. Porter GC-76 Deputy General Counsel Litigation, Regulation & Enforcement Anne Harkavy GC-30 Deputy General Counsel Transactions, Technology, & Contractor Human Resources John T. Lucas GC-60 Assistant General Counsel Procurement

  11. Louisiana Title V General Permits

    SciTech Connect

    Boyer, B.E.; Neal, T.L.

    1995-12-31

    Title V of the Federal Clean Air Act Amendments of 1990 requires federal operating permits for all major sources of air pollution. In 1992, Title 40, Part 70 of the Code of Federal Regulations (40 CFR Part 70) codified the law s requirements. These federal regulations, entitled Operating Permit Program, define the minimum requirements for state administered operating permit programs. The intent of Title V is to put into one document all requirements of an operating permit. General Permits for oil and gas facilities may be preferred if the facility can comply with all permit requirements. If greater flexibility than allowed by the General Permit is required, then the facility should apply for an individual Title V permit. General Permits are designed to streamline the permitting process, shorten the time it takes to obtain approval for initial and modified permits. The advantages of the General Permit include reduced paperwork and greater consistency because the permits are standardized. There should be less uncertainty because permit requirements will be known at the time of application. Approval times for Initial and modified General Permits should be reduced. Lengthy public notice procedures (and possible hearings) will be required for only the initial approval of the General Permit and not for each applicant to the permit. A disadvantage of General Permits is reduced flexibility since the facility must comply with the requirements of a standardized permit.

  12. Evaluation of Gas, Oil and Wood Pellet Fueled Residential Heating System Emissions Characteristics

    SciTech Connect

    McDonald, R.

    2009-12-01

    This study has measured the emissions from a wide range of heating equipment burning different fuels including several liquid fuel options, utility supplied natural gas and wood pellet resources. The major effort was placed on generating a database for the mass emission rate of fine particulates (PM 2.5) for the various fuel types studied. The fine particulates or PM 2.5 (less than 2.5 microns in size) were measured using a dilution tunnel technique following the method described in US EPA CTM-039. The PM 2.5 emission results are expressed in several units for the benefit of scientists, engineers and administrators. The measurements of gaseous emissions of O{sub 2}, CO{sub 2}, CO, NO{sub x} and SO{sub 2} were made using a combustion analyzer based on electrochemical cells These measurements are presented for each of the residential heating systems tested. This analyzer also provides a steady state efficiency based on stack gas and temperature measurements and these values are included in the report. The gaseous results are within the ranges expected from prior emission studies with the enhancement of expanding these measurements to fuels not available to earlier researchers. Based on measured excess air levels and ultimate analysis of the fuel's chemical composition the gaseous emission results are as expected and fall within the range provided for emission factors contained in the US-EPA AP 42, Emission Factors Volume I, Fifth Edition. Since there were no unexpected findings in these gaseous measurements, the bulk of the report is centered on the emissions of fine particulates, or PM 2.5. The fine particulate (PM 2.5) results for the liquid fuel fired heating systems indicate a very strong linear relationship between the fine particulate emissions and the sulfur content of the liquid fuels being studied. This is illustrated by the plot contained in the first figure on the next page which clearly illustrates the linear relationship between the measured mass of fine

  13. Interactive Effects of Climate Change and Decomposer Communities on the Stabilization of Wood-Derived Carbon Pools: Catalyst for a New Study

    SciTech Connect

    Resh, Sigrid C.

    2014-11-17

    Globally, forest soils store ~two-thirds as much carbon (C) as the atmosphere. Although wood makes up the majority of forest biomass, the importance of wood contributions to soil C pools is unknown. Even with recent advances in the mechanistic understanding of soil processes, integrative studies tracing C input pathways and biological fluxes within and from soils are lacking. Therefore, our research objectives were to assess the impact of different fungal decay pathways (i.e., white-rot versus brown-rot)—in interaction with wood quality, soil temperature, wood location (i.e., soil surface and buried in mineral soil), and soil texture—on the transformation of woody material into soil CO2 efflux, dissolved organic carbon (DOC), and soil C pools. The use of 13C-depleted woody biomass harvested from the Rhinelander, WI free-air carbon dioxide enrichment (Aspen-FACE) experiment affords the unique opportunity to distinguish the wood-derived C from other soil C fluxes and pools. We established 168 treatment plots across six field sites (three sand and three loam textured soil). Treatment plots consisted of full-factorial design with the following treatments: 1. Wood chips from elevated CO2, elevated CO2 + O3, or ambient atmosphere AspenFACE treatments; 2. Inoculated with white rot (Bjerkandera adusta) or brown rot (Gloeophyllum sepiarium) pure fungal cultures, or the original suite of endemic microbial community on the logs; and 3. Buried (15cm in soil as a proxy for coarse roots) or surface applied wood chips. We also created a warming treatment using open-topped, passive warming chambers on a subset of the above treatments. Control plots with no added wood (“no chip control”) were incorporated into the research design. Soils were sampled for initial δ13C values, CN concentrations, and bulk density. A subset of plots were instrumented with lysimeters for sampling soil water and temperature data loggers for measuring soil temperatures. To determine the early

  14. LA-2271 CHEMISTRY-GENERAL

    Office of Scientific and Technical Information (OSTI)

    2271 CHEMISTRY-GENERAL TID-4500, 14th Ed. LOS ALAMOS SCIENTIFIC LABORATORY OF THE ... U in Vol. n of A Treatise on Physical Chemistry, edited by H. S. Taylor and S. ...

  15. General Electric | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    General Electric Place: Fairfield, Connecticut Zip: 06828 Region: Northeast - NY NJ CT PA Area Year Founded: 1892 Website: www.ge.com Coordinates: 41.1758333, -73.2719444...

  16. The deposition and burning characteristics during slagging co-firing coal and wood: modeling and numerical simulation

    SciTech Connect

    Wang, X.H.; Zhao, D.Q.; Jiang, L.Q.; Yang, W.B.

    2009-07-01

    Numerical analysis was used to study the deposition and burning characteristics of combining co-combustion with slagging combustion technologies in this paper. The pyrolysis and burning kinetic models of different fuels were implanted into the WBSF-PCC2 (wall burning and slag flow in pulverized co-combustion) computation code, and then the slagging and co-combustion characteristics (especially the wall burning mechanism of different solid fuels and their effects on the whole burning behavior in the cylindrical combustor at different mixing ratios under the condition of keeping the heat input same) were simulated numerically. The results showed that adding wood powder at 25% mass fraction can increase the temperature at the initial stage of combustion, which is helpful to utilize the front space of the combustor. Adding wood powder at a 25% mass fraction can increase the reaction rate at the initial combustion stage; also, the coal ignitability is improved, and the burnout efficiency is enhanced by about 5% of suspension and deposition particles, which is helpful for coal particles to burn entirely and for combustion devices to minimize their dimensions or sizes. The results also showed that adding wood powder at a proper ratio is helpful to keep the combustion stability, not only because of the enhancement for the burning characteristics, but also because the running slag layer structure can be changed more continuously, which is very important for avoiding the abnormal slag accumulation in the slagging combustor. The theoretic analysis in this paper proves that unification of co-combustion and slagging combustion technologies is feasible, though more comprehensive and rigorous research is needed.

  17. Genome analysis of Daldinia eschscholtzii strains UM 1400 and UM 1020, wood-decaying fungi isolated from human hosts

    SciTech Connect

    Chan, Chai Ling; Yew, Su Mei; Ngeow, Yun Fong; Na, Shiang Ling; Lee, Kok Wei; Hoh, Chee-Choong; Yee, Wai-Yan; Ng, Kee Peng

    2015-11-18

    Background: Daldinia eschscholtzii is a wood-inhabiting fungus that causes wood decay under certain conditions. It has a broad host range and produces a large repertoire of potentially bioactive compounds. However, there is no extensive genome analysis on this fungal species. Results: Two fungal isolates (UM 1400 and UM 1020) from human specimens were identified as Daldinia eschscholtzii by morphological features and ITS-based phylogenetic analysis. Both genomes were similar in size with 10,822 predicted genes in UM 1400 (35.8 Mb) and 11,120 predicted genes in UM 1020 (35.5 Mb). A total of 751 gene families were shared among both UM isolates, including gene families associated with fungus-host interactions. In the CAZyme comparative analysis, both genomes were found to contain arrays of CAZyme related to plant cell wall degradation. Genes encoding secreted peptidases were found in the genomes, which encode for the peptidases involved in the degradation of structural proteins in plant cell wall. In addition, arrays of secondary metabolite backbone genes were identified in both genomes, indicating of their potential to produce bioactive secondary metabolites. Both genomes also contained an abundance of gene encoding signaling components, with three proposed MAPK cascades involved in cell wall integrity, osmoregulation, and mating/filamentation. Besides genomic evidence for degrading capability, both isolates also harbored an array of genes encoding stress response proteins that are potentially significant for adaptation to living in the hostile environments. In conclusion: Our genomic studies provide further information for the biological understanding of the D. eschscholtzii and suggest that these wood-decaying fungi are also equipped for adaptation to adverse environments in the human host.

  18. Development of size reduction equations for calculating power input for grinding pine wood chips using hammer mill

    DOE PAGES [OSTI]

    Naimi, Ladan J.; Collard, Flavien; Bi, Xiaotao; Lim, C. Jim; Sokhansanj, Shahab

    2016-01-05

    Size reduction is an unavoidable operation for preparing biomass for biofuels and bioproduct conversion. Yet, there is considerable uncertainty in power input requirement and the uniformity of ground biomass. Considerable gains are possible if the required power input for a size reduction ratio is estimated accurately. In this research three well-known mechanistic equations attributed to Rittinger, Kick, and Bond available for predicting energy input for grinding pine wood chips were tested against experimental grinding data. Prior to testing, samples of pine wood chips were conditioned to 11.7% wb, moisture content. The wood chips were successively ground in a hammer millmore » using screen sizes of 25.4 mm, 10 mm, 6.4 mm, and 3.2 mm. The input power and the flow of material into the grinder were recorded continuously. The recorded power input vs. mean particle size showed that the Rittinger equation had the best fit to the experimental data. The ground particle sizes were 4 to 7 times smaller than the size of installed screen. Geometric mean size of particles were calculated using two methods (1) Tyler sieves and using particle size analysis and (2) Sauter mean diameter calculated from the ratio of volume to surface that were estimated from measured length and width. The two mean diameters agreed well, pointing to the fact that either mechanical sieving or particle imaging can be used to characterize particle size. In conclusion, specific energy input to the hammer mill increased from 1.4 kWh t–1 (5.2 J g–1) for large 25.1-mm screen to 25 kWh t–1 (90.4 J g–1) for small 3.2-mm screen.« less

  19. Development of palm oil-based UV-curable epoxy acrylate and urethane acrylate resins for wood coating application

    SciTech Connect

    Tajau, Rida; Mahmood, Mohd Hilmi; Salleh, Mek Zah; Salleh, Nik Ghazali Nik; Ibrahim, Mohammad Izzat; Yunus, Nurulhuda Mohd

    2014-02-12

    The trend of using renewable sources such as palm oil as raw material in radiation curing is growing due to the demand from the market to produce a more environmental friendly product. In this study, the radiation curable process was done using epoxy acrylate and urethane acrylate resins which are known as epoxidised palm olein acrylate (EPOLA) and palm oil based urethane acrylate (POBUA), respectively. The purpose of the study was to investigate curing properties and the application of this UV-curable palm oil resins for wood coating. Furthermore, the properties of palm oil based coatings are compared with the petrochemical-based compound such as ebecryl (EB) i.e. EB264 and EB830. From the experiment done, the resins from petrochemical-based compounds resulted higher degree of crosslinking (up to 80%) than the palm oil based compounds (up to 70%), where the different is around 10-15%. The hardness property from this two type coatings can reached until 50% at the lower percentage of the oligomer. However, the coatings from petrochemical-based have a high scratch resistance as it can withstand at least up to 3.0 Newtons (N) compared to the palm oil-based compounds which are difficult to withstand the load up to 1.0 N. Finally, the test on the rubber wood substrate showed that the coatings containing benzophenone photoinitiator give higher adhesion property and their also showed a higher glosiness property on the glass substrate compared to the coatings containing irgacure-819 photoinitiator. This study showed that the palm oil coatings can be a suitable for the replacement of petrochemicals compound for wood coating. The palm oil coatings can be more competitive in the market if the problems of using high percentage palm oil oligomer can be overcome as the palm oil price is cheap enough.

  20. Genome analysis of Daldinia eschscholtzii strains UM 1400 and UM 1020, wood-decaying fungi isolated from human hosts

    DOE PAGES [OSTI]

    Chan, Chai Ling; Yew, Su Mei; Ngeow, Yun Fong; Na, Shiang Ling; Lee, Kok Wei; Hoh, Chee-Choong; Yee, Wai-Yan; Ng, Kee Peng

    2015-11-18

    Background: Daldinia eschscholtzii is a wood-inhabiting fungus that causes wood decay under certain conditions. It has a broad host range and produces a large repertoire of potentially bioactive compounds. However, there is no extensive genome analysis on this fungal species. Results: Two fungal isolates (UM 1400 and UM 1020) from human specimens were identified as Daldinia eschscholtzii by morphological features and ITS-based phylogenetic analysis. Both genomes were similar in size with 10,822 predicted genes in UM 1400 (35.8 Mb) and 11,120 predicted genes in UM 1020 (35.5 Mb). A total of 751 gene families were shared among both UM isolates,more » including gene families associated with fungus-host interactions. In the CAZyme comparative analysis, both genomes were found to contain arrays of CAZyme related to plant cell wall degradation. Genes encoding secreted peptidases were found in the genomes, which encode for the peptidases involved in the degradation of structural proteins in plant cell wall. In addition, arrays of secondary metabolite backbone genes were identified in both genomes, indicating of their potential to produce bioactive secondary metabolites. Both genomes also contained an abundance of gene encoding signaling components, with three proposed MAPK cascades involved in cell wall integrity, osmoregulation, and mating/filamentation. Besides genomic evidence for degrading capability, both isolates also harbored an array of genes encoding stress response proteins that are potentially significant for adaptation to living in the hostile environments. In conclusion: Our genomic studies provide further information for the biological understanding of the D. eschscholtzii and suggest that these wood-decaying fungi are also equipped for adaptation to adverse environments in the human host.« less