National Library of Energy BETA

Sample records for wide audience including

  1. Audience Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Oct 1, 2011 - Sep 21, 2013 Audience Overview Language Visits % Visits 1. en-us 391,320 85.94% 2. zh-cn 6,437 1.41% 3. es 6,060 1.33% 4. en-gb 5,710 1.25% 5. en 5,072 1.11% 6. fr ...

  2. Audience Categorization and Behavior Change

    Office of Energy Efficiency and Renewable Energy (EERE)

    This sheet from the U.S. Department of Energy Better Buildings Neighborhood Program is a tool to use for audience brainstorm and categorization, and assessing desired behavior change.

  3. Women of Waste Management Panel Advises Audience: 'Embrace Hard Work' |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Women of Waste Management Panel Advises Audience: 'Embrace Hard Work' Women of Waste Management Panel Advises Audience: 'Embrace Hard Work' March 30, 2015 - 12:00pm Addthis Panelists, from left, included Johnson, Charboneau, and Piketty, and moderator Jody Redeker. Panelists, from left, included Johnson, Charboneau, and Piketty, and moderator Jody Redeker. PHOENIX - A panel of distinguished leaders in nuclear cleanup discussed issues facing women in the workplace in

  4. Audience Segmentation and Analysis Strategies for Targeted Marketing...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Audience Segmentation and Analysis Strategies for Targeted Marketing (301) Audience Segmentation and Analysis Strategies for Targeted Marketing (301) September 24, 2015 12:30PM to...

  5. Audience Segmentation and Analysis Strategies for Targeted Marketing...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Audience Segmentation and Analysis Strategies for Targeted Marketing (301) Audience Segmentation and Analysis Strategies for Targeted Marketing (301) Better Buildings Residential ...

  6. Audience Segmentation and Analysis Strategies for Targeted Marketing (301)

    Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Audience Segmentation and Analysis Strategies for Targeted Marketing (301).

  7. Hello out there. Are you reading me. [Audience identification

    SciTech Connect

    Lindberg, H.A.

    1982-01-01

    Audience identification is the first step in purposeful writing. Yet we find little written information that helps us in determining the makeup of an audience, what it needs to know, and how we can use that information to produce a meaningful publication. A large national laboratory reaches diverse audiences with different types of publications. Representative communicators who produce manuals, press releases, public relations publications, in-house publications, journal articles, and technical reports share their methods of identifying and writing for audiences and pose some thought-provoking questions about audiences and the lack thereof.

  8. Stakeholder Mapping: Learn How to Identify Leaders, Target Audiences, and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Gaps in Your Outreach | Department of Energy Stakeholder Mapping: Learn How to Identify Leaders, Target Audiences, and Gaps in Your Outreach Stakeholder Mapping: Learn How to Identify Leaders, Target Audiences, and Gaps in Your Outreach Better Buildings Residential Network Peer Exchange Call Series: Stakeholder Mapping, June 26, 2014, call slides and discussion summary. Call Slides and Discussion Summary (996.03 KB) More Documents & Publications Voluntary Initiative: Partnerships Toolkit

  9. Writing for a General Audience | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Additional Resources Communicating Science to Nonscientists, Stanford University lecture A 50-minute talk about the challenges of communicating to a general audience and strategies for scientists to overcome these challenges. The talk is delivered by Dr. Jean-Luc Doumont, an engineer with a Ph.D. in applied physics from Stanford University. Contact undergrad@anl.gov Writing a General Audience Abstract "[The scientist] must help in educating the public, in the broad sense, and this means

  10. Enhancing Graduate Student Communication to General Audiences through Blogging about Nanotechnology and Sustainability

    SciTech Connect

    Bishop, Lee M.; Tillman, Ayesha S.; Geiger, Franz M.; Haynes, Christy L.; Klaper, Rebecca D.; Murphy, Catherine; Orr, Galya; Pedersen, Joel A.; DeStefano, Lizanne; Hamers, Robert J.

    2014-10-14

    We have developed and assessed a multiauthor science blog on the topic of nanotechnology and sustainability as a tool to improve the written communication and public engagement skills of graduate students. Focus group studies revealed that after participation in the blog, student authors felt more confident and capable of communicating technical topics to general audiences. Students' research mentors viewed this as an important component of their students' education, as indicated by survey data. Important design aspects of this effort include participation of an editor as well as having flexible content and target-audience guidelines. We have explicitly outlined aspects of the effort we see as critical in order to enable others to replicate this model in related settings.

  11. SWEIS annual review - CY2002 : a comparison of CY2002 operations to projections included in the site-wide environmental impact statement for continued operation of Sandia National Laboratories/New Mexico.

    SciTech Connect

    Bayliss, Linda Sue; White, Brenda Bailey; Guerrero, Joseph Vincent; Catechis, Christopher Spyros

    2003-10-01

    The SNL/NM CY2002 SWEIS Annual Review discusses changes in facilities and facility operations that have occurred in selected and notable facilities since source data were collected for the SNL/NM SWEIS (DOE/EIS-0281). The following information is presented: {sm_bullet} An updated overview of SNL/NM selected and notable facilities and infrastructure capabilities. {sm_bullet} An overview of SNL/NM environment, safety, and health programs, including summaries of the purpose, operations, activities, hazards, and hazard controls at relevant facilities and risk management methods for SNL/NM. {sm_bullet} Updated base year activities data, together with related inventories, material consumption, emissions, waste, and resource consumption. {sm_bullet} Appendices summarizing activities and related hazards at SNL/NM individual special, general, and highbay laboratories, and chemical purchases.

  12. Keeping Up With Your Audience, So They Keep Up with Your Program

    Energy.gov [DOE]

    Keeping Up With Your Audience, So They Keep Up with Your Program - BBNP Program Implementation - Snapshot Series Webinar, May 17, 2012

  13. Pump apparatus including deconsolidator

    SciTech Connect

    Sonwane, Chandrashekhar; Saunders, Timothy; Fitzsimmons, Mark Andrew

    2014-10-07

    A pump apparatus includes a particulate pump that defines a passage that extends from an inlet to an outlet. A duct is in flow communication with the outlet. The duct includes a deconsolidator configured to fragment particle agglomerates received from the passage.

  14. Optical modulator including grapene

    DOEpatents

    Liu, Ming; Yin, Xiaobo; Zhang, Xiang

    2016-06-07

    The present invention provides for a one or more layer graphene optical modulator. In a first exemplary embodiment the optical modulator includes an optical waveguide, a nanoscale oxide spacer adjacent to a working region of the waveguide, and a monolayer graphene sheet adjacent to the spacer. In a second exemplary embodiment, the optical modulator includes at least one pair of active media, where the pair includes an oxide spacer, a first monolayer graphene sheet adjacent to a first side of the spacer, and a second monolayer graphene sheet adjacent to a second side of the spacer, and at least one optical waveguide adjacent to the pair.

  15. A preliminary examination of audience-related communications issues for the Hanford Environmental Dose Reconstruction Project

    SciTech Connect

    Holmes, C.W.

    1991-04-01

    The Hanford Environmental Dose Reconstruction (HEDR) Project will estimate radiation doses people may have received from exposure to radioactive materials released during past operations at the US Department of Energy's (DOE) Hanford Site near Richland, Washington. The HEDR Project was initiated in response to public concerns about possible health impacts from past releases of radioactive materials from Hanford. The TSP recognized early in the project that special mechanisms would be required to effectively communicate to the many different concerned audiences. Accordingly, the TSP directed PNL to examine methods for communicating causes and effects of uncertainties in the dose estimates. After considering the directive and discussing it with the Communications Subcommittee of the TSP, PNL undertook a broad investigation of communications methods to consider for inclusion in the TSP's current communications program. As part of this investigation, a literature review was conducted regarding risk communications. A key finding was that, in order to successfully communicate risk-related information, a thorough understanding of the knowledge level, concerns and information needs of the intended recipients (i.e., the audience) is necessary. Hence, a preliminary audience analysis was conducted as part of the present research. This report summarizes the results of this analysis. 1 ref., 9 tabs.

  16. Wide Bandgap Power Electronics

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Wide Bandgap Power Electronics 1 Technology Assessment 2 Contents 3 1. Introduction to the Technology/System ............................................................................................... 1 4 2. Technology Assessment and Potential ................................................................................................. 3 5 2.1 Performance advances in SiC ........................................................................................................ 3 6 2.2

  17. the World Wide Web

    Office of Scientific and Technical Information (OSTI)

    technical report has been made electronically available on the World Wide Web through a contribution from Walter L. Warnick In honor of Enrico Fermi Leader of the first nuclear ...

  18. Sandia National Laboratories: DOE Complex Wide Agreements

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    DOE Complex Wide Agreements Sandia National Laboratories utilizes complex wide agreements to leverage the annual spending, to yield lower prices, and to provide cost savings to the complex. The Complex agreements utilized by Sandia National Laboratories include: Supply Chain Management Center (SCMC) agreements Integrated Contractor Purchasing TEAM (ICPT) General Services Administration (GSA)

  19. WIDE BAND REGENERATIVE FREQUENCY DIVIDER AND MULTIPLIER

    DOEpatents

    Laine, E.F.

    1959-11-17

    A regenerative frequency divider and multiplier having wide band input characteristics is presented. The circuit produces output oscillations having frequencies related by a fixed ratio to input oscillations over a wide band of frequencies. In accomplishing this end, the divider-multiplier includes a wide band input circuit coupled by mixer means to a wide band output circuit having a pass band related by a fixed ratio to that of the input circuit. A regenerative feedback circuit derives a fixed frequency ratio feedback signal from the output circuit and applies same to the mixer means in proper phase relation to sustain fixed frequency ratio oscillations in the output circuit.

  20. Wide-range voltage modulation

    SciTech Connect

    Rust, K.R.; Wilson, J.M.

    1992-06-01

    The Superconducting Super Collider`s Medium Energy Booster Abort (MEBA) kicker modulator will supply a current pulse to the abort magnets which deflect the proton beam from the MEB ring into a designated beam stop. The abort kicker will be used extensively during testing of the Low Energy Booster (LEB) and the MEB rings. When the Collider is in full operation, the MEBA kicker modulator will abort the MEB beam in the event of a malfunction during the filling process. The modulator must generate a 14-{mu}s wide pulse with a rise time of less than 1 {mu}s, including the delay and jitter times. It must also be able to deliver a current pulse to the magnet proportional to the beam energy at any time during ramp-up of the accelerator. Tracking the beam energy, which increases from 12 GeV at injection to 200 GeV at extraction, requires the modulator to operate over a wide range of voltages (4 kV to 80 kV). A vacuum spark gap and a thyratron have been chosen for test and evaluation as candidate switches for the abort modulator. Modulator design, switching time delay, jitter and pre-fire data are presented.

  1. Briefing Products - Tools for Communicating Technical Issues to a Non-Technical Audience

    SciTech Connect

    Dr. Harvey Clark, Kevin T. Foster

    2011-06-09

    Briefing Products are a new NARAC/IMAAC product line designed to communicate the consequences of a radiological, nuclear, chemical or biological agent incident to non-technical decision makers and key leaders. Each Briefing Product addresses a single decision or issue focused on potential actions that should be considered when responding to a hazard, while avoiding the use of technical or regulatory jargon. Briefing Products do not make protective action recommendations, although they do concretely assist decision-makers with development of their own protective actions by quoting or paraphrasing the published guidance relevant to the decision at hand. Briefing Products are produced in sets tailored to specific types of incident which together depict the key decisions and characteristics of the incident. Each Briefing Product in the set consists of three elements: (1) Primary Effects, (2) Key Points and (3) Presenter Notes. Both the Primary Effects and Key Points are ready for direct presentation, while the Presenter Notes are designed to provide background information to the presenter and are not for direct presentation to the audience. The Briefing Products themselves are alternative presentations of results from the customary standard NARAC/IMAAC technical products. Currently, Briefing Products are available for detonation of both RDDs (Radiological Dispersal Devices) and INDs (Improvised Nuclear Devices). A new set of products tailored to nuclear power plant (NPP) accidents is currently under development. This paper describes the scope, structure and content of the Briefing Product sets. Examples from the two sets of Briefing Products now available are presented.

  2. Wide area continuous offender monitoring

    SciTech Connect

    Hoshen, J.; Drake, G.; Spencer, D.

    1996-11-01

    The corrections system in the U.S. is supervising over five million offenders. This number is rising fast and so are the direct and indirect costs to society. To improve supervision and reduce the cost of parole and probation, first generation home arrest systems were introduced in 1987. While these systems proved to be helpful to the corrections system, their scope is rather limited because they only cover an offender at a single location and provide only a partial time coverage. To correct the limitations of first-generation systems, second-generation wide area continuous electronic offender monitoring systems, designed to monitor the offender at all times and locations, are now on the drawing board. These systems use radio frequency location technology to track the position of offenders. The challenge for this technology is the development of reliable personal locator devices that are small, lightweight, with long operational battery life, and indoors/outdoors accuracy of 100 meters or less. At the center of a second-generation system is a database that specifies the offender`s home, workplace, commute, and time the offender should be found in each. The database could also define areas from which the offender is excluded. To test compliance, the system would compare the observed coordinates of the offender with the stored location for a given time interval. Database logfiles will also enable law enforcement to determine if a monitored offender was present at a crime scene and thus include or exclude the offender as a potential suspect.

  3. SEP Enterprise-Wide Accelerator

    Energy.gov [DOE]

    Industrial companies are testing strategies to implement Superior Energy Performance® (SEP™) across multiple facilities and benefit from economies of scale through the SEP Enterprise-wide Program...

  4. JLab announces two Spring Science Series events - topics include...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    the University of Virginia, will examine "How Things Work." He will offer the audience an introduction to the physics and science found in everyday life; and examine objects from...

  5. Wide field of view telescope

    DOEpatents

    Ackermann, Mark R.; McGraw, John T.; Zimmer, Peter C.

    2008-01-15

    A wide field of view telescope having two concave and two convex reflective surfaces, each with an aspheric surface contour, has a flat focal plane array. Each of the primary, secondary, tertiary, and quaternary reflective surfaces are rotationally symmetric about the optical axis. The combination of the reflective surfaces results in a wide field of view in the range of approximately 3.8.degree. to approximately 6.5.degree.. The length of the telescope along the optical axis is approximately equal to or less than the diameter of the largest of the reflective surfaces.

  6. Going Deep vs. Going Wide

    Energy.gov [DOE]

    Going Deep vs. Going Wide, from the Residential Energy Efficiency Solutions Conference 2012. Provides an overview on the progress of four energy efficiency programs: Clean Energy Works Oregon, Efficiency Maine, Energy Upgrade California Flex Path, and EcoHouse Loan Program.

  7. Concave nanomagnets with widely tunable anisotropy

    DOEpatents

    Lambson, Brian; Gu, Zheng; Carlton, David; Bokor, Jeffrey

    2014-07-01

    A nanomagnet having widely tunable anisotropy is disclosed. The disclosed nanomagnet is a magnetic particle with a convex shape having a first magnetically easy axis. The convex shape is modified to include at least one concavity to urge a second magnetically easy axis to form substantially offset from the first magnetically easy axis. In at least one embodiment, the convex shape is also modified to include at least one concavity to urge a second magnetically easy axis to form with a magnetic strength substantially different from the first magnetically easy axis.

  8. Wide Bandgap Semiconductors | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Wide Bandgap Semiconductors Wide Bandgap Semiconductors Addthis Duration 1:55 Topic Energy Sector Jobs Manufacturing Transmission Innovation

  9. Wide Bandgap Extrinsic Photoconductive Switches

    SciTech Connect

    Sullivan, J S

    2012-01-17

    Photoconductive semiconductor switches (PCSS) have been investigated since the late 1970s. Some devices have been developed that withstand tens of kilovolts and others that switch hundreds of amperes. However, no single device has been developed that can reliably withstand both high voltage and switch high current. Yet, photoconductive switches still hold the promise of reliable high voltage and high current operation with subnanosecond risetimes. Particularly since good quality, bulk, single crystal, wide bandgap semiconductor materials have recently become available. In this chapter we will review the basic operation of PCSS devices, status of PCSS devices and properties of the wide bandgap semiconductors 4H-SiC, 6H-SiC and 2H-GaN.

  10. Securing Wide Area Measurement Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Securing Wide Area Measurement Systems Securing Wide Area Measurement Systems This report documents an assessment of wide area measurement system (WAMS) security conducted by Pacific Northwest National Laboratory (PNNL) as a project funded by the National SCADA Test Bed Program in cooperation with the Department of Energy's Transmission Reliability Program. With emphasis on cyber security, this report also addresses other categories of risk and vulnerability including equipment reliability, data

  11. Wide Electrochemical Window Solvents - Energy Innovation Portal

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Wide Bandgap Semiconductors Wide Bandgap Semiconductors Addthis Duration 1:55 Topic Energy Sector Jobs Manufacturing Transmission Innovation

    Wide Bandgap Semiconductors: Pursuing the Promise Wide Bandgap Semiconductors: Pursuing the Promise Wide bandgap semiconductor materials are more efficient than their silicon-based counterparts; making it possible to reduce weight, volume, and life-cycle costs in a wide range of power applications. Wide Bandgap Semiconductors: Pursuing the Promise (1.37

  12. Webinar October 21: Opportunities for Wide Bandgap Semiconductor...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    from the development of next-generation power electronics based on wide bandgap (WBG) semiconductor materials such as SiC and GaN. Examples include the development of reliable,...

  13. Interconnection-Wide Transmission Planning Initiative - Meeting...

    Office of Environmental Management (EM)

    Interconnection-Wide Transmission Planning Initiative - Meeting Calendars Interconnection-Wide Transmission Planning Initiative - Meeting Calendars Click on the links below to ...

  14. Hanford Site Wide Programs - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Page | Print Print Page |Text Increase Font Size Decrease Font Size Hanford Site-Wide Programs Hanford Safety and Health Hanford Site Wide Programs Hanford Fire Department...

  15. Audience/Panel Discussion: Sites Lesson Learned about Activity-level Work Planning and Control Using EFCOG Work Planning and Control Guideline

    Energy.gov [DOE]

    Slide Presentation by Donna J. Governor, Deputy Dept Mgr for Planning & Integration, Lawrence Livermore National Laboratory. Lawrence Livermore National Laboratory work planning and control lessons learned and audience/panel discussion on site's lessons learned about Activity-level Work Planning and Control using EFCOG Work Planning and Control Guideline Document.

  16. Wide Bandgap Materials | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Materials Wide Bandgap Materials 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting ape007_chinthavali_2012_o.pdf (593.13 KB) More Documents & Publications Wide Bandgap Materials Wide Bandgap Materials Wide Bandgap Power Electronics

  17. Plant Wide Assessment for SIFCO Industries, Inc.

    SciTech Connect

    Kelly Kissock, Arvind Thekdi et. al.

    2005-07-06

    Sifco Industries carreid out a plant wide energy assessment under a collaborative program with the U.S. Department of Energy during October 2004 to September 2005. During the year, personnel from EIS, E3M, DPS, BuyCastings.Com, and Sifco plant facilities and maintenance personnel, as a team collected energy use, construction, process, equipment and operational information about the plant. Based on this information, the team identified 13 energy savings opportunities. Near term savings opportunities have a total potential savings of about $1,329,000 per year and a combined simple payback of about 11 months. Implementation of these recommendations would reduce CO2 emissions by about 16,000,000 pounds per year, which would reduce overall plant CO2 emissions by about 45%. These totals do not include another $830,000 per year in potential savings with an estimated 9-month payback, from converting the forging hammers from steam to compressed air.

  18. Quantitative Analysis of Biofuel Sustainability, Including Land...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Quantitative Analysis of Biofuel Sustainability, Including Land Use Change GHG Emissions Quantitative Analysis of Biofuel Sustainability, Including Land Use Change GHG Emissions ...

  19. Enterprise-Wide Agreements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Enterprise-Wide Agreements Enterprise-Wide Agreements hand-819279_960_720.jpg Enterprise-Wide Agreements The IT Acquisition: Enterprise-Wide Agreement (EWA) Program develops policies and procedures that support the identification, acquisition, oversight and compliance of enterprise licenses. The EWA Program's core objectives are to: Maximize IT buying power Reduce the total cost of ownership Streamline the IT total acquisition lifecycle The EWA Program employs a centralized, cross-functional,

  20. Topic A Note: Includes STEPS Subtopic

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Topic A Note: Includes STEPS Subtopic 33 Total Projects Developing and Enhancing Workforce Training Programs...

  1. INFOGRAPHIC: Wide Bandgap Semiconductors | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    INFOGRAPHIC: Wide Bandgap Semiconductors INFOGRAPHIC: Wide Bandgap Semiconductors January 21, 2014 - 12:44pm Addthis INFOGRAPHIC: Wide Bandgap Semiconductors MORE RESOURCES Watch the video on WBG semiconductors Read the Advanced Manufacturing Office fact sheet on WBG semiconductors Subscribe to Advanced Manufacturing Office news updates Learn about the Clean Energy Manufacturing Initiative For decades, power electronics - or tiny pieces of equipment such as inverters and rectifiers made of

  2. DFAS Wide-Area Workflow Issues

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation covers the DFAS wide-area workflow issues and is given at the Spring 2011 Federal Utility Partnership Working Group (FUPWG) meeting.

  3. Interconnection-Wide Transmission Planning Initiative: Topic...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    State Agency Input Regarding Electric Resource and Transmission Planning in the Texas Interconnection Interconnection-Wide Transmission Planning Initiative: Topic B, State Agency ...

  4. Interconnection-Wide Transmission Planning Initiative: Topic...

    Office of Environmental Management (EM)

    A, Interconnection-Level Analysis and Planning Interconnection-Wide Transmission Planning Initiative: Topic A, Interconnection-Level Analysis and Planning A description of the ...

  5. Interconnection-Wide Transmission Planning Initiative: Topic...

    Energy Saver

    Eastern Interconnection on Electric Resource Planning and Priorities Interconnection-Wide Transmission Planning Initiative: Topic B, Cooperation Among States in the Eastern ...

  6. Interconnection-Wide Transmission Planning Initiative: Topic...

    Energy Saver

    Western Interconnection on Electric Resource Planning and Priorities Interconnection-Wide Transmission Planning Initiative: Topic B, Cooperation Among States in the Western ...

  7. West Wide Programmatic Environmental Impact Statement Record...

    OpenEI (Open Energy Information) [EERE & EIA]

    navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: West Wide Programmatic Environmental Impact Statement Record of Decision (BLM)Legal...

  8. Site-wide Environmental Impact Statement

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    SWEIS Site-wide Environmental Impact Statement We analyze the potential environmental impacts ... and the Department of Energy's NEPA Implementing Procedures (10 CFR part 1021). ...

  9. Radioactive Waste Management Complex Wide Review

    Office of Environmental Management (EM)

    This page intentionally blank i Complex-Wide Review of DOE's Radioactive Waste Management ... 1.8 Demonstrated Progress in Radioactive Waste Management ......

  10. Site-wide Environmental Impact Statement

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    SWEIS Site-wide Environmental Impact Statement We analyze the potential environmental impacts associated with Laboratory operations and facilities. Contact Environmental...

  11. INSTRUMENTATION, INCLUDING NUCLEAR AND PARTICLE DETECTORS; RADIATION

    Office of Scientific and Technical Information (OSTI)

    interval technical basis document Chiaro, P.J. Jr. 44 INSTRUMENTATION, INCLUDING NUCLEAR AND PARTICLE DETECTORS; RADIATION DETECTORS; RADIATION MONITORS; DOSEMETERS;...

  12. Media Advisory: Site-wide Safety Standards

    Energy.gov [DOE]

    Department of Energy to announce two additions to the Hanford Site-wide Safety Standards – a set of 14 areas where Hanford contractors have collaborated to establish one uniform standard to guide safe operations. The latest additions to the Site-wide Safety Standards are Fall Protection and Electrical Safety.

  13. Gas storage materials, including hydrogen storage materials

    DOEpatents

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  14. Communications circuit including a linear quadratic estimator

    SciTech Connect

    Ferguson, Dennis D.

    2015-07-07

    A circuit includes a linear quadratic estimator (LQE) configured to receive a plurality of measurements a signal. The LQE is configured to weight the measurements based on their respective uncertainties to produce weighted averages. The circuit further includes a controller coupled to the LQE and configured to selectively adjust at least one data link parameter associated with a communication channel in response to receiving the weighted averages.

  15. Gas storage materials, including hydrogen storage materials

    DOEpatents

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2014-11-25

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  16. Wide Area Security Region Final Report

    SciTech Connect

    Makarov, Yuri V.; Lu, Shuai; Guo, Xinxin; Gronquist, James; Du, Pengwei; Nguyen, Tony B.; Burns, J. W.

    2010-03-31

    This report develops innovative and efficient methodologies and practical procedures to determine the wide-area security region of a power system, which take into consideration all types of system constraints including thermal, voltage, voltage stability, transient and potentially oscillatory stability limits in the system. The approach expands the idea of transmission system nomograms to a multidimensional case, involving multiple system limits and parameters such as transmission path constraints, zonal generation or load, etc., considered concurrently. The security region boundary is represented using its piecewise approximation with the help of linear inequalities (so called hyperplanes) in a multi-dimensional space, consisting of system parameters that are critical for security analyses. The goal of this approximation is to find a minimum set of hyperplanes that describe the boundary with a given accuracy. Methodologies are also developed to use the security hyperplanes, pre-calculated offline, to determine system security margins in real-time system operations, to identify weak elements in the system, and to calculate key contributing factors and sensitivities to determine the best system controls in real time and to assist in developing remedial actions and transmission system enhancements offline . A prototype program that automates the simulation procedures used to build the set of security hyperplanes has also been developed. The program makes it convenient to update the set of security hyperplanes necessitated by changes in system configurations. A prototype operational tool that uses the security hyperplanes to assess security margins and to calculate optimal control directions in real time has been built to demonstrate the project success. Numerical simulations have been conducted using the full-size Western Electricity Coordinating Council (WECC) system model, and they clearly demonstrated the feasibility and the effectiveness of the developed

  17. Scramjet including integrated inlet and combustor

    SciTech Connect

    Kutschenreuter, P.H. Jr.; Blanton, J.C.

    1992-02-04

    This patent describes a scramjet engine. It comprises: a first surface including an aft facing step; a cowl including: a leading edge and a trailing edge; an upper surface and a lower surface extending between the leading edge and the trailing edge; the cowl upper surface being spaced from and generally parallel to the first surface to define an integrated inlet-combustor therebetween having an inlet for receiving and channeling into the inlet-combustor supersonic inlet airflow; means for injecting fuel into the inlet-combustor at the step for mixing with the supersonic inlet airflow for generating supersonic combustion gases; and further including a spaced pari of sidewalls extending between the first surface to the cowl upper surface and wherein the integrated inlet-combustor is generally rectangular and defined by the sidewall pair, the first surface and the cowl upper surface.

  18. Electric Power Monthly, August 1990. [Glossary included

    SciTech Connect

    Not Available

    1990-11-29

    The Electric Power Monthly (EPM) presents monthly summaries of electric utility statistics at the national, Census division, and State level. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. Data includes generation by energy source (coal, oil, gas, hydroelectric, and nuclear); generation by region; consumption of fossil fuels for power generation; sales of electric power, cost data; and unusual occurrences. A glossary is included.

  19. Sandia Wide-Bandgap Semiconductor Workshop

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... In response to increased interest in wide-bandgap (WBG) semiconductor projects by DOE, on October 30, 2012, Sandia hosted a one-day brain-storming workshop aimed at identifying the ...

  20. Opportunities for Wide Bandgap Semiconductor Power Electronics...

    Energy.gov [DOE] (indexed site)

    Semiconductor Power Electronics for Hydrogen and Fuel Cell Applications" held on October 21, 2014. ... Vehicle Technologies Office Merit Review 2016: Advanced Low-Cost SiC and GaN Wide ...

  1. DOE-wide NEPA Contracting Update

    Energy.gov [DOE]

    A DOE team is evaluating the offers received in response to a Request for Quotations to provide NEPA support services. The scope of the solicitation is similar to that of the DOE-wide NEPA support...

  2. Plant-wide Systems | Department of Energy

    Office of Environmental Management (EM)

    Use the software tools, training, and publications listed below to improve performance and save energy. Plant Wide Tools Tools to manage energy DOE eGuide for ISO 50001 DOE eGuide ...

  3. Radioactive Waste Management Complex Wide Review

    Energy.gov [DOE]

    The main goal of this complex‐wide review was to obtain feedback from DOE sites and Headquarters Program Offices on the effectiveness and workability of DOE Order 435.1 and its associated Manual...

  4. Estimating System-wide Impacts of Smart Grid Demonstrations

    SciTech Connect

    Schneider, Kevin P.; Lightner, Eric M.; Fuller, Jason C.

    2015-03-01

    Quantifying the impact of a new technology on a single specific distribution feeder is relatively easy, but it does not provide insight into the complexities and variations of a system-wide deployment. It is the inability to extrapolate system-wide impacts that hinders the deployment of many promising new technologies. This paper presents a method of extrapolating technology impacts, either simulated or from a field demonstration, from a limited number of distribution feeders to a system-wide impact. The size of the system can vary from the service territory of a single utility, to a region, or to an entire country. The paper will include an example analysis using the United States Department of Energy (DOE) funded Smart Grid Investment Grant (SGIG) projects, extrapolating their benefits to a national level.

  5. Photoactive devices including porphyrinoids with coordinating additives

    DOEpatents

    Forrest, Stephen R; Zimmerman, Jeramy; Yu, Eric K; Thompson, Mark E; Trinh, Cong; Whited, Matthew; Diev, Vlacheslav

    2015-05-12

    Coordinating additives are included in porphyrinoid-based materials to promote intermolecular organization and improve one or more photoelectric characteristics of the materials. The coordinating additives are selected from fullerene compounds and organic compounds having free electron pairs. Combinations of different coordinating additives can be used to tailor the characteristic properties of such porphyrinoid-based materials, including porphyrin oligomers. Bidentate ligands are one type of coordinating additive that can form coordination bonds with a central metal ion of two different porphyrinoid compounds to promote porphyrinoid alignment and/or pi-stacking. The coordinating additives can shift the absorption spectrum of a photoactive material toward higher wavelengths, increase the external quantum efficiency of the material, or both.

  6. Subterranean barriers including at least one weld

    DOEpatents

    Nickelson, Reva A.; Sloan, Paul A.; Richardson, John G.; Walsh, Stephanie; Kostelnik, Kevin M.

    2007-01-09

    A subterranean barrier and method for forming same are disclosed, the barrier including a plurality of casing strings wherein at least one casing string of the plurality of casing strings may be affixed to at least another adjacent casing string of the plurality of casing strings through at least one weld, at least one adhesive joint, or both. A method and system for nondestructively inspecting a subterranean barrier is disclosed. For instance, a radiographic signal may be emitted from within a casing string toward an adjacent casing string and the radiographic signal may be detected from within the adjacent casing string. A method of repairing a barrier including removing at least a portion of a casing string and welding a repair element within the casing string is disclosed. A method of selectively heating at least one casing string forming at least a portion of a subterranean barrier is disclosed.

  7. Wide aperture seismic recording in offshore west Sicily and Bolivia

    SciTech Connect

    Tilander, N.G.; Lattimore, R.K.

    1994-12-31

    Seismic operations using the Wide Aperture Recording (WAR) technique were carried out in offshore west Sicily (16.5 km offsets) and in the Sub-Andean Cordillera of Bolivia (9.0 km offsets) where conventional offset data have traditionally proved inadequate for imaging complex subsurface structures. In both cases, noise-free wide aperture events were visible at long offsets, and were successfully stacked using both hyperbolic and linear moveout. In the Sicily datasets, the resulting seismic images disagree with earlier structural interpretations, but the lack of reliable ``calibration`` data in terms of well control or usable conventional seismic data make final evaluation and interpretation of the Sicily wide aperture data ambiguous. In Bolivia good quality seismic data are present across a portion of the WAR survey; the results show that the wide aperture technique may produce a valid structural image, provided the subsurface geometries are sufficiently broad and shallow. For tight structures, the technique is unlikely to produce valid images. In general, the authors` studies show that considerable effort is required at the data processing and interpretation stage, including full waveform and ray-trace modeling, in order to identify event arrivals and to attempt to validate the wide aperture structural images. Reliable calibration data in the form of well control or conventional seismic data are needed in order to provide an understanding of the WAR results.

  8. Rotor assembly including superconducting magnetic coil

    DOEpatents

    Snitchler, Gregory L.; Gamble, Bruce B.; Voccio, John P.

    2003-01-01

    Superconducting coils and methods of manufacture include a superconductor tape wound concentrically about and disposed along an axis of the coil to define an opening having a dimension which gradually decreases, in the direction along the axis, from a first end to a second end of the coil. Each turn of the superconductor tape has a broad surface maintained substantially parallel to the axis of the coil.

  9. Nuclear reactor shield including magnesium oxide

    DOEpatents

    Rouse, Carl A.; Simnad, Massoud T.

    1981-01-01

    An improvement in nuclear reactor shielding of a type used in reactor applications involving significant amounts of fast neutron flux, the reactor shielding including means providing structural support, neutron moderator material, neutron absorber material and other components as described below, wherein at least a portion of the neutron moderator material is magnesium in the form of magnesium oxide either alone or in combination with other moderator materials such as graphite and iron.

  10. Electric power monthly, September 1990. [Glossary included

    SciTech Connect

    Not Available

    1990-12-17

    The purpose of this report is to provide energy decision makers with accurate and timely information that may be used in forming various perspectives on electric issues. The power plants considered include coal, petroleum, natural gas, hydroelectric, and nuclear power plants. Data are presented for power generation, fuel consumption, fuel receipts and cost, sales of electricity, and unusual occurrences at power plants. Data are compared at the national, Census division, and state levels. 4 figs., 52 tabs. (CK)

  11. Power generation method including membrane separation

    DOEpatents

    Lokhandwala, Kaaeid A.

    2000-01-01

    A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

  12. Horizontal film balance having wide range and high sensitivity

    DOEpatents

    Abraham, B.M.; Miyano, K.; Ketterson, J.B.

    1981-03-05

    A thin-film, horizontal balance instrument is provided for measuring surface tension (surface energy) of thin films suspended on a liquid substrate. The balance includes a support bearing and an optical feedback arrangement for wide-range, high sensitivity measurements. The force on the instrument is balanced by an electromagnet, the current through the magnet providing a measure of the force applied to the instrument. A novel float construction is also disclosed.

  13. Horizontal film balance having wide range and high sensitivity

    DOEpatents

    Abraham, Bernard M.; Miyano, Kenjiro; Ketterson, John B.

    1983-01-01

    A thin-film, horizontal balance instrument is provided for measuring surface tension (surface energy) of thin films suspended on a liquid substrate. The balance includes a support bearing and an optical feedback arrangement for wide-range, high sensitivity measurements. The force on the instrument is balanced by an electromagnet, the current through the magnet providing a measure of the force applied to the instrument. A novel float construction is also disclosed.

  14. Horizontal film balance having wide range and high sensitivity

    DOEpatents

    Abraham, B.M.; Miyano, K.; Ketterson, J.B.

    1983-11-08

    A thin-film, horizontal balance instrument is provided for measuring surface tension (surface energy) of thin films suspended on a liquid substrate. The balance includes a support bearing and an optical feedback arrangement for wide-range, high sensitivity measurements. The force on the instrument is balanced by an electromagnet, the current through the magnet providing a measure of the force applied to the instrument. A novel float construction is also disclosed. 5 figs.

  15. Hanford Site-Wide Probabilistic Seismic Hazard Analysis

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    L - Glossary of Key Terms and Symbols Hanford Site-Wide Probabilistic Seismic Hazard Analysis 2014 Appendix L Glossary of Key Terms and Symbols Definitions provided in this glossary were compiled from multiple sources, including the Senior Seismic Hazard Analysis Committee (SSHAC) guidance in NUREG/CR-6372 (Budnitz et al. 1997), NUREG-2117 (NRC 2012), and McGuire (2004). The glossary definitions are consistent with the use of the terms in the Hanford Probabilistic Seismic Hazard Analysis (PSHA)

  16. Thermovoltaic semiconductor device including a plasma filter

    DOEpatents

    Baldasaro, Paul F.

    1999-01-01

    A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

  17. Optical panel system including stackable waveguides

    DOEpatents

    DeSanto, Leonard; Veligdan, James T.

    2007-03-06

    An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

  18. Optical panel system including stackable waveguides

    DOEpatents

    DeSanto, Leonard; Veligdan, James T.

    2007-11-20

    An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

  19. Drapery assembly including insulated drapery liner

    DOEpatents

    Cukierski, Gwendolyn (Ithaca, NY)

    1983-01-01

    A drapery assembly is disclosed for covering a framed wall opening, the assembly including drapery panels hung on a horizontal traverse rod, the rod having a pair of master slides and means for displacing the master slides between open and closed positions. A pair of insulating liner panels are positioned behind the drapery, the remote side edges of the liner panels being connected with the side portions of the opening frame, and the adjacent side edges of the liner panels being connected with a pair of vertically arranged center support members adapted for sliding movement longitudinally of a horizontal track member secured to the upper horizontal portion of the opening frame. Pivotally arranged brackets connect the center support members with the master slides of the traverse rod whereby movement of the master slides to effect opening and closing of the drapery panels effects simultaneous opening and closing of the liner panels.

  20. Wide temperature range seal for demountable joints

    DOEpatents

    Sixsmith, H.; Valenzuela, J.A.; Nutt, W.E.

    1991-07-23

    The present invention is directed to a seal for demountable joints operating over a wide temperature range down to liquid helium temperatures. The seal has anti-extrusion guards which prevent extrusion of the soft ductile sealant material, which may be indium or an alloy thereof. 6 figures.

  1. Wide temperature range seal for demountable joints

    DOEpatents

    Sixsmith, Herbert; Valenzuela, Javier A.; Nutt, William E.

    1991-07-23

    The present invention is directed to a seal for demountable joints operating over a wide temperature range down to liquid helium temperatures. The seal has anti-extrusion guards which prevent extrusion of the soft ductile sealant material, which may be indium or an alloy thereof.

  2. Articles including thin film monolayers and multilayers

    DOEpatents

    Li, DeQuan; Swanson, Basil I.

    1995-01-01

    Articles of manufacture including: (a) a base substrate having an oxide surface layer, and a multidentate ligand, capable of binding a metal ion, attached to the oxide surface layer of the base substrate, (b) a base substrate having an oxide surface layer, a multidentate ligand, capable of binding a metal ion, attached to the oxide surface layer of the base substrate, and a metal species attached to the multidentate ligand, (c) a base substrate having an oxide surface layer, a multidentate ligand, capable of binding a metal ion, attached to the oxide surface layer of the base substrate, a metal species attached to the multidentate ligand, and a multifunctional organic ligand attached to the metal species, and (d) a base substrate having an oxide surface layer, a multidentate ligand, capable of binding a metal ion, attached to the oxide surface layer of the base substrate, a metal species attached to the multidentate ligand, a multifunctional organic ligand attached to the metal species, and a second metal species attached to the multifunctional organic ligand, are provided, such articles useful in detecting the presence of a selected target species, as nonliear optical materials, or as scavengers for selected target species.

  3. Engine lubrication circuit including two pumps

    DOEpatents

    Lane, William H.

    2006-10-03

    A lubrication pump coupled to the engine is sized such that the it can supply the engine with a predetermined flow volume as soon as the engine reaches a peak torque engine speed. In engines that operate predominately at speeds above the peak torque engine speed, the lubrication pump is often producing lubrication fluid in excess of the predetermined flow volume that is bypassed back to a lubrication fluid source. This arguably results in wasted power. In order to more efficiently lubricate an engine, a lubrication circuit includes a lubrication pump and a variable delivery pump. The lubrication pump is operably coupled to the engine, and the variable delivery pump is in communication with a pump output controller that is operable to vary a lubrication fluid output from the variable delivery pump as a function of at least one of engine speed and lubrication flow volume or system pressure. Thus, the lubrication pump can be sized to produce the predetermined flow volume at a speed range at which the engine predominately operates while the variable delivery pump can supplement lubrication fluid delivery from the lubrication pump at engine speeds below the predominant engine speed range.

  4. Dynamic stall simulation including turbulence modeling

    SciTech Connect

    Allet, A.; Halle, S.; Paraschivoiu, I.

    1995-09-01

    The objective of this study is to investigate the two-dimensional unsteady flow around an airfoil undergoing a Darrieus motion in dynamic stall conditions. For this purpose, a numerical solver based on the solution of the Reynolds-averaged Navier-Stokes equations expressed in a streamfunction-vorticity formulation in a non-inertial frame of reference was developed. The governing equations are solved by the streamline upwind Petrov-Galerkin finite element method (FEM). Temporal discretization is achieved by second-order-accurate finite differences. The resulting global matrix system is linearized by the Newton method and solved by the generalized minimum residual method (GMRES) with an incomplete triangular factorization preconditioning (ILU). Turbulence effects are introduced in the solver by an eddy viscosity model. The investigation centers on an evaluation of the possibilities of several turbulence models, including the algebraic Cebeci-Smith model (CSM) and the nonequilibrium Johnson-King model (JKM). In an effort to predict dynamic stall features on rotating airfoils, first the authors present some testing results concerning the performance of both turbulence models for the flat plate case. Then, computed flow structure together with aerodynamic coefficients for a NACA 0015 airfoil in Darrieus motion under stall conditions are presented.

  5. Thematic World Wide Web Visualization System

    Energy Science and Technology Software Center

    1996-10-10

    WebTheme is a system designed to facilitate world wide web information access and retrieval through visualization. It consists of two principal pieces, a WebTheme Server which allows users to enter in a query and automatocally harvest and process information of interest, and a WebTheme browser, which allows users to work with both Galaxies and Themescape visualizations of their data within a JAVA capable world wide web browser. WebTheme is an Internet solution, meaning that accessmore » to the server and the resulting visualizations can all be performed through the use of a WWW browser. This allows users to access and interact with SPIRE (Spatial Paradigm for Information Retrieval and Exploration) based visualizations through a web browser regardless of what computer platforms they are running on. WebTheme is specifically designed to create databases by harvesting and processing WWW home pages available on the Internet.« less

  6. Environmentally Benign Electrolytes With Wide Electrochemical Windows -

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Innovation Portal Environmentally Benign Electrolytes With Wide Electrochemical Windows DOE Grant Recipients Arizona Technology Enterprises Contact Arizona Technology Enterprises About This Technology Technology Marketing SummaryAs mobile electronics continue to evolve, the need for safe, long-lasting rechargeable batteries has grown tremendously. In the search for suitable materials from which to construct high energy density solid state batteries, one of the principal obstacles has

  7. Efficient Wide Area Data Transfer Protocols

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Efficient Wide Area Data Transfer Protocols for 100 Gbps Networks and Beyond Ezra Kissel School of Informatics and Computing Indiana University Bloomington, IN 47405 ezkissel@indiana.edu Martin Swany School of Informatics and Computing Indiana University Bloomington, IN 47405 swany@iu.edu Brian Tierney Lawrence Berkeley National Laboratory Berkeley, CA 94720 bltierney@lbl.gov Eric Pouyoul Lawrence Berkeley National Laboratory Berkeley, CA 94720 epouyoul@lbl.gov Due to a number of recent

  8. Comparison of Wide-Bandgap Semiconductors for Power Electronics Applications

    SciTech Connect

    Ozpineci, B.

    2004-01-02

    Recent developmental advances have allowed silicon (Si) semiconductor technology to approach the theoretical limits of the Si material; however, power device requirements for many applications are at a point that the present Si-based power devices cannot handle. The requirements include higher blocking voltages, switching frequencies, efficiency, and reliability. To overcome these limitations, new semiconductor materials for power device applications are needed. For high power requirements, wide-bandgap semiconductors like silicon carbide (SiC), gallium nitride (GaN), and diamond, with their superior electrical properties, are likely candidates to replace Si in the near future. This report compares wide-bandgap semiconductors with respect to their promise and applicability for power applications and predicts the future of power device semiconductor materials.

  9. Ionic liquids, electrolyte solutions including the ionic liquids, and energy storage devices including the ionic liquids

    SciTech Connect

    Gering, Kevin L.; Harrup, Mason K.; Rollins, Harry W.

    2015-12-08

    An ionic liquid including a phosphazene compound that has a plurality of phosphorus-nitrogen units and at least one pendant group bonded to each phosphorus atom of the plurality of phosphorus-nitrogen units. One pendant group of the at least one pendant group comprises a positively charged pendant group. Additional embodiments of ionic liquids are disclosed, as are electrolyte solutions and energy storage devices including the embodiments of the ionic liquid.

  10. WIRELESS MINE-WIDE TELECOMMUNICATIONS TECHNOLOGY

    SciTech Connect

    Zvi H. Meiksin

    2004-03-01

    A comprehensive mine-wide, two-way wireless voice and data communication system for the underground mining industry was developed. The system achieves energy savings through increased productivity and greater energy efficiency in meeting safety requirements within mines. The mine-wide system is comprised of two interfaced subsystems: a through-the-earth communications system and an in-mine communications system. The mine-wide system permits two-way communication among underground personnel and between underground and surface personnel. The system was designed, built, and commercialized. Several systems are in operation in underground mines in the United States. The use of these systems has proven they result in considerable energy savings. A system for tracking the location of vehicles and people within the mine was also developed, built and tested successfully. Transtek's systems are being used by the National Institute of Occupational Safety and Health (NIOSH) in their underground mine rescue team training program. This project also resulted in a spin-off rescue team lifeline and communications system. Furthermore, the project points the way to further developments that can lead to a GPS-like system for underground mines allowing the use of autonomous machines in underground mining operations, greatly reducing the amount of energy used in these operations. Some products developed under this program are transferable to applications in fields other than mining. The rescue team system is applicable to use by first responders to natural, accidental, or terrorist-caused building collapses. The in-mine communications system can be installed in high-rise buildings providing in-building communications to security and maintenance personnel as well as to first responders.

  11. Modern testing meets wide range of objectives

    SciTech Connect

    Ehlig-Economides, C.A.; Hegeman, P. ); Clark, G. )

    1994-08-01

    Testing sequences in two very different wells illustrate the wide range of objectives that are met with modern testing procedures. The first example is a drill stem test in an exploration well. The second test is in an established producing well. The exploration well test incorporated tubing-conveyed perforating, fluid sampling, production logging, and matrix stimulation to evaluate and properly treat near-well bore damage, as well as to investigate reservoir volume and characterize boundaries. The test on the established producer evaluated whether a workover could remedy lower than expected productivity. Production logging was combined with stationary transient measurements.

  12. 2009 Industry-Wide Buyer's Guide

    SciTech Connect

    2009-10-15

    The guide lists US companies supplying equipment and services to coal mining and coal preparation operations. An index by product category is included.

  13. Wide-area situation awareness in electric power grid

    SciTech Connect

    Greitzer, Frank L.

    2010-04-28

    Two primary elements of the US energy policy are demand management and efficiency and renewable sources. Major objectives are clean energy transmission and integration, reliable energy transmission, and grid cyber security. Development of the Smart Grid seeks to achieve these goals by lowering energy costs for consumers, achieving energy independence and reducing greenhouse gas emissions. The Smart Grid is expected to enable real time wide-area situation awareness (SA) for operators. Requirements for wide-area SA have been identified among interoperability standards proposed by the Federal Energy Regulatory Commission and the National Institute of Standards and Technology to ensure smart-grid functionality. Wide-area SA and enhanced decision support and visualization tools are key elements in the transformation to the Smart Grid. This paper discusses human factors research to promote SA in the electric power grid and the Smart Grid. Topics that will be discussed include the role of human factors in meeting US energy policy goals, the impact and challenges for Smart Grid development, and cyber security challenges.

  14. Wide band stepped frequency ground penetrating radar

    DOEpatents

    Bashforth, M.B.; Gardner, D.; Patrick, D.; Lewallen, T.A.; Nammath, S.R.; Painter, K.D.; Vadnais, K.G.

    1996-03-12

    A wide band ground penetrating radar system is described embodying a method wherein a series of radio frequency signals is produced by a single radio frequency source and provided to a transmit antenna for transmission to a target and reflection therefrom to a receive antenna. A phase modulator modulates those portions of the radio frequency signals to be transmitted and the reflected modulated signal is combined in a mixer with the original radio frequency signal to produce a resultant signal which is demodulated to produce a series of direct current voltage signals, the envelope of which forms a cosine wave shaped plot which is processed by a Fast Fourier Transform Unit 44 into frequency domain data wherein the position of a preponderant frequency is indicative of distance to the target and magnitude is indicative of the signature of the target. 6 figs.

  15. Wide band stepped frequency ground penetrating radar

    DOEpatents

    Bashforth, Michael B.; Gardner, Duane; Patrick, Douglas; Lewallen, Tricia A.; Nammath, Sharyn R.; Painter, Kelly D.; Vadnais, Kenneth G.

    1996-01-01

    A wide band ground penetrating radar system (10) embodying a method wherein a series of radio frequency signals (60) is produced by a single radio frequency source (16) and provided to a transmit antenna (26) for transmission to a target (54) and reflection therefrom to a receive antenna (28). A phase modulator (18) modulates those portion of the radio frequency signals (62) to be transmitted and the reflected modulated signal (62) is combined in a mixer (34) with the original radio frequency signal (60) to produce a resultant signal (53) which is demodulated to produce a series of direct current voltage signals (66) the envelope of which forms a cosine wave shaped plot (68) which is processed by a Fast Fourier Transform unit 44 into frequency domain data (70) wherein the position of a preponderant frequency is indicative of distance to the target (54) and magnitude is indicative of the signature of the target (54).

  16. Wide range radioactive gas concentration detector

    DOEpatents

    Anderson, David F.

    1984-01-01

    A wide range radioactive gas concentration detector and monitor which is capable of measuring radioactive gas concentrations over a range of eight orders of magnitude. The device of the present invention is designed to have an ionization chamber which is sufficiently small to give a fast response time for measuring radioactive gases but sufficiently large to provide accurate readings at low concentration levels. Closely spaced parallel plate grids provide a uniform electric field in the active region to improve the accuracy of measurements and reduce ion migration time so as to virtually eliminate errors due to ion recombination. The parallel plate grids are fabricated with a minimal surface area to reduce the effects of contamination resulting from absorption of contaminating materials on the surface of the grids. Additionally, the ionization chamber wall is spaced a sufficient distance from the active region of the ionization chamber to minimize contamination effects.

  17. Imaging spectrometer wide field catadioptric design

    DOEpatents

    Chrisp; Michael P.

    2008-08-19

    A wide field catadioptric imaging spectrometer with an immersive diffraction grating that compensates optical distortions. The catadioptric design has zero Petzval field curvature. The imaging spectrometer comprises an entrance slit for transmitting light, a system with a catadioptric lens and a dioptric lens for receiving the light and directing the light, an immersion grating, and a detector array. The entrance slit, the system for receiving the light, the immersion grating, and the detector array are positioned wherein the entrance slit transmits light to the system for receiving the light and the system for receiving the light directs the light to the immersion grating and the immersion grating receives the light and directs the light through the system for receiving the light to the detector array.

  18. Wide Bandgap Semiconductors: Pursuing the Promise | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Wide Bandgap Semiconductors: Pursuing the Promise Wide Bandgap Semiconductors: Pursuing the Promise Wide bandgap semiconductor materials are more efficient than their silicon-based counterparts; making it possible to reduce weight, volume, and life-cycle costs in a wide range of power applications. Wide Bandgap Semiconductors: Pursuing the Promise (1.37 MB) More Documents & Publications Wide Bandgap Semiconductors for Clean Energy Workshop Vehicle Technologies Office Merit Review 2015:

  19. Draft Site-Wide Environmental Impact Statement Nevada Summary...

    National Nuclear Security Administration (NNSA)

    Office of General Counsel National Environmental Policy Act (NEPA) NEPA Reading Room Draft Site-Wide Environmental Impact Statement Nevada Draft Site-Wide Environmental...

  20. DOE Issues Final Site-Wide Environmental Impact Statement for...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Site-Wide Environmental Impact Statement for the Nevada National Security Site DOE Issues Final Site-Wide Environmental Impact Statement for the Nevada National Security Site...

  1. Government-Wide Diversity and Inclusion Strategic Plan (2011...

    Energy Saver

    Government-Wide Diversity and Inclusion Strategic Plan (2011), Office of Personnel Management Government-Wide Diversity and Inclusion Strategic Plan (2011), Office of Personnel ...

  2. V -209:Cisco WAAS (Wide Area Application Services) Arbitrary...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    V -209:Cisco WAAS (Wide Area Application Services) Arbitrary Code Execution Vulnerabilities V -209:Cisco WAAS (Wide Area Application Services) Arbitrary Code Execution...

  3. Commonwealth Aluminum: Manufacturer Conducts Plant-Wide Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Commonwealth Aluminum: Manufacturer Conducts Plant-Wide Energy Assessments at Two Aluminum Sheet Production Operations Commonwealth Aluminum: Manufacturer Conducts Plant-Wide ...

  4. DOE Traineeship In Power Engineering (Leveraging Wide Bandgap...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    DOE Traineeship In Power Engineering (Leveraging Wide Bandgap Power Electronics) DOE Traineeship In Power Engineering (Leveraging Wide Bandgap Power Electronics) July 20, 2015 -...

  5. AMO's New Institute Focused on Wide Bandgap Power Electronics...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Focused on Wide Bandgap Power Electronics Manufacturing AMO's New Institute Focused on Wide Bandgap Power Electronics Manufacturing January 15, 2014 - 11:34am Addthis The Next ...

  6. Proposed Energy Transport Corridors: West-wide energy corridor...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Proposed Energy Transport Corridors: West-wide energy corridor programmatic EIS, Draft Corridors - September 2007. Proposed Energy Transport Corridors: West-wide energy corridor ...

  7. Guidance for Site-wide Environmental Impact Statements | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    guidance for Site-wide Environmental Impact Statements PDF icon Guidance for Site-wide Environmental Impact Statements More Documents & Publications Recommendations on...

  8. DOE Announces Webinars on Zero Energy Ready Homes, Wide Bandgap...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    October 21: Live Webinar on Opportunities for Wide Bandgap Semiconductor Power Electronics ... "Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen and ...

  9. EIS-0309: Final Site-Wide Environmental Impact Statement | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Final Site-Wide Environmental Impact Statement EIS-0309: Final Site-Wide Environmental Impact Statement The Department of Energy (DOE) limits electronic access to certain NEPA ...

  10. EIS-0309: Draft Site-Wide Environmental Impact Statement | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Draft Site-Wide Environmental Impact Statement EIS-0309: Draft Site-Wide Environmental Impact Statement The Department of Energy (DOE) limits electronic access to certain NEPA ...

  11. Wide size range fast integrated mobility spectrometer

    DOEpatents

    Wang, Jian

    2013-10-29

    A mobility spectrometer to measure a nanometer particle size distribution is disclosed. The mobility spectrometer includes a conduit and a detector. The conduit is configured to receive and provide fluid communication of a fluid stream having a charged nanometer particle mixture. The conduit includes a separator section configured to generate an electrical field of two dimensions transverse to a dimension associated with the flow of the charged nanometer particle mixture through the separator section to spatially separate charged nanometer particles of the charged nanometer particle mixture in said two dimensions. The detector is disposed downstream of the conduit to detect concentration and position of the spatially-separated nanometer particles.

  12. A Wide Field of View Plasma Spectrometer

    DOE PAGES [OSTI]

    Skoug, Ruth M.; Funsten, Herbert O.; Moebius, Eberhard; Harper, Ron W.; Kihara, Keith H.; Bower, Jonathan S.

    2016-07-23

    Here we present a fundamentally new type of space plasma spectrometer, the wide field of view plasma spectrometer, whose field of view is >1.25π ster using fewer resources than traditional methods. The enabling component is analogous to a pinhole camera with an electrostatic energy-angle filter at the image plane. Particle energy-per-charge is selected with a tunable bias voltage applied to the filter plate relative to the pinhole aperture plate. For a given bias voltage, charged particles from different directions are focused by different angles to different locations. Particles with appropriate locations and angles can transit the filter plate and aremore » measured using a microchannel plate detector with a position-sensitive anode. Full energy and angle coverage are obtained using a single high-voltage power supply, resulting in considerable resource savings and allowing measurements at fast timescales. Lastly, we present laboratory prototype measurements and simulations demonstrating the instrument concept and discuss optimizations of the instrument design for application to space measurements.« less

  13. World-wide distribution automation systems

    SciTech Connect

    Devaney, T.M.

    1994-12-31

    A worldwide power distribution automation system is outlined. Distribution automation is defined and the status of utility automation is discussed. Other topics discussed include a distribution management system, substation feeder, and customer functions, potential benefits, automation costs, planning and engineering considerations, automation trends, databases, system operation, computer modeling of system, and distribution management systems.

  14. Wide-Bandgap Compound Semiconductors to Enable Novel Semiconductor Devices

    SciTech Connect

    Crawford, M.H.; Chow, W.W.; Wright, A.F.; Lee, S.R.; Jones, E.D.; Han, J.; Shul, R.J.

    1999-04-01

    This report represents the completion of a three-year Laboratory-Directed Research and Development (LDRD) program that focused on research and development of GaN-based wide bandgap semiconductor materials (referred to as III-N materials). Our theoretical investigations include the determination of fundamental materials parameters from first-principles calculations, the study of gain properties of III-N heterostructures using a microscopic laser theory and density-functional-theory, charge-state calculations to determine the core structure and energy levels of dislocations in III-N materials. Our experimental investigations include time-resolved photoluminescence and magneto-luminescence studies of GaN epilayers and multiquantum well samples as well as x-ray diffraction studies of AlGaN ternary alloys. In addition, we performed a number of experiments to determine how various materials processing steps affect both the optical and electrical properties of GaN-based materials. These studies include photoluminescence studies of GaN epilayers after post-growth rapid thermal annealing, ion implantation to produce n- and p-type material and electrical and optical studies of plasma-etched structures.

  15. A comprehensive plant-wide assessment of Amcor PET Packaging at Fairfield, California

    SciTech Connect

    Kevin Losh; Hui Choi; Yin Yin Wu; Bryan W. Hackett; Ahmad R. Ganji

    2008-02-29

    This report includes the results of the plant-wide assessment of AMCOR PET plants in Fairfield, City of Commerce, and Lathrop California. The project (except the assessment of Lathrop plant) was a cost shared effort between US Department of Energy through Golden Field Office, Golden CO and AMCOR PET Packaging Co. The DOE share of the plant-wide assessment cost was awarded to AMCOR PET in response to the RFP DE-PS36-05GO95009, the 2005 round of funding for Plant-Wide Energy Efficiency Opportunity Assessments. The plant-wide assessment included the processes, electrical and gas equipment. Current production practices have been evaluated against best practice standards, as well as utilization of modern technology to improve energy efficiency, reduce the wastes, and improve productivity.

  16. EIS-0387: Draft Site-Wide Environmental Impact Statement | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Draft Site-Wide Environmental Impact Statement EIS-0387: Draft Site-Wide Environmental Impact Statement Y-12 National Security Complex, Oak Ridge, TN The NNSA, a separately organized agency within the DOE, has the responsibility to maintain the safety, reliability, and security of the U.S. nuclear weapons stockpile to meet national security requirements. NNSA manages nuclear weapons programs and facilities, including those at the Y-12 National Security Complex (Y-12) at Oak Ridge,

  17. EIS-0387: Final Site-Wide Environmental Impact Statement | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Final Site-Wide Environmental Impact Statement EIS-0387: Final Site-Wide Environmental Impact Statement Y-12 National Security Complex Project, Oak Ridge, TN NNSA, a separately organized agency within DOE, is responsible for maintaining the safety, reliability, and security of the U.S. nuclear weapons stockpile to meet national security requirements. NNSA manages nuclear weapons programs and facilities, including those at the Y-12 National Security Complex (Y-12) at Oak Ridge,

  18. Y-12 Final Site-Wide Environmental Impact Statement Approved...

    National Nuclear Security Administration (NNSA)

    Blog Home Field Offices Welcome to the NNSA Production Office NPO News Releases Y-12 Final Site-Wide Environmental Impact Statement Approved Y-12 Final Site-Wide...

  19. Benefits of Site-wide NEPA National Environmental Policy Act...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Benefits of Site-wide NEPA National Environmental Policy Act Review (DOE, 1994) Benefits of Site-wide NEPA National Environmental Policy Act Review (DOE, 1994) The purpose of this ...

  20. EAC Recommendations for DOE Action Regarding Interconnection-Wide Planning

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    - June 6, 2013 | Department of Energy Interconnection-Wide Planning - June 6, 2013 EAC Recommendations for DOE Action Regarding Interconnection-Wide Planning - June 6, 2013 EAC Recommendations for DOE Action Regarding Interconnection-Wide Planning, approved at the June 5-6, 2013 EAC Meeting. EAC Recommendations for DOE Action on Interconnection-Wide Planning - June 6, 2013 (147.93 KB) More Documents & Publications Electricity Advisory Committee Meeting Presentations October 2011 -

  1. EA-1914: Draft Site-Wide Environmental Assessment

    Office of Energy Efficiency and Renewable Energy (EERE)

    National Renewable Energy Laboratory (NREL) National Wind Technology Center (NWTC) Site-Wide Environmental Assessment, Golden, Colorado

  2. Wide Area Thermal Processing of Light Emitting Materials

    SciTech Connect

    Duty, Chad E; Joshi, Pooran C; Jellison Jr, Gerald Earle; Angelini, Joseph Attilio; Sabau, Adrian S

    2011-10-01

    Laboratory laser materials synthesis of wide bandgap materials has been successfully used to create white light emitting materials (LEMs). This technology development has progressed to the exploration on design and construction of apparatus for wide area doping and phase transformation of wide bandgap material substrates. The objective of this proposal is to develop concepts for wide area doping and phase transformation based on AppliCote Associates, LLC laser technology and ORNL high density pulsed plasma arc technology.

  3. EA-1968: Final Site-Wide Environmental Assessment

    Energy.gov [DOE]

    National Renewable Energy Laboratory (NREL) South Table Mountain (STM) Campus Site-Wide Environmental Assessment, Golden, Colorado

  4. Nuclear Arms Control R&D Consortium includes Los Alamos

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Nuclear Arms Control R&D Consortium includes Los Alamos Nuclear Arms Control R&D Consortium includes Los Alamos A consortium led by the University of Michigan that includes LANL as ...

  5. Should Title 24 Ventilation Requirements Be Amended to include...

    Office of Scientific and Technical Information (OSTI)

    include an Indoor Air Quality Procedure? Citation Details In-Document Search Title: Should Title 24 Ventilation Requirements Be Amended to include an Indoor Air Quality Procedure? ...

  6. Natural Gas Delivered to Consumers in California (Including Vehicle...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    California (Including Vehicle Fuel) (Million Cubic Feet) Natural Gas Delivered to Consumers in California (Including Vehicle Fuel) (Million Cubic Feet) Year Jan Feb Mar Apr May Jun ...

  7. Natural Gas Deliveries to Commercial Consumers (Including Vehicle...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Deliveries to Commercial Consumers (Including Vehicle Fuel through 1996) in the U.S. (Million Cubic Feet) Natural Gas Deliveries to Commercial Consumers (Including Vehicle Fuel ...

  8. Solar Energy Education. Reader, Part II. Sun story. [Includes...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Reader, Part II. Sun story. Includes glossary Citation Details In-Document Search Title: Solar Energy Education. Reader, Part II. Sun story. Includes glossary You are ...

  9. Microfluidic devices and methods including porous polymer monoliths...

    Office of Scientific and Technical Information (OSTI)

    Microfluidic devices and methods including porous polymer monoliths Title: Microfluidic devices and methods including porous polymer monoliths Microfluidic devices and methods ...

  10. Microfluidic devices and methods including porous polymer monoliths...

    Office of Scientific and Technical Information (OSTI)

    Microfluidic devices and methods including porous polymer monoliths Citation Details In-Document Search Title: Microfluidic devices and methods including porous polymer monoliths ...

  11. Newport News in Review, ch. 47, segment includes TEDF groundbreaking...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    https:www.jlab.orgnewsarticlesnewport-news-review-ch-47-segment-includes-tedf-groundbreaking-event Newport News in Review, ch. 47, segment includes TEDF groundbreaking event...

  12. Property:Number of Plants included in Capacity Estimate | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Plants included in Capacity Estimate Jump to: navigation, search Property Name Number of Plants included in Capacity Estimate Property Type Number Retrieved from "http:...

  13. Property:Number of Plants Included in Planned Estimate | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Number of Plants Included in Planned Estimate Jump to: navigation, search Property Name Number of Plants Included in Planned Estimate Property Type String Description Number of...

  14. FEMP Expands ESPC ENABLE Program to Include More Energy Conservation...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Expands ESPC ENABLE Program to Include More Energy Conservation Measures FEMP Expands ESPC ENABLE Program to Include More Energy Conservation Measures November 13, 2013 - 12:00am...

  15. Natural Gas Delivered to Consumers in Minnesota (Including Vehicle...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Minnesota (Including Vehicle Fuel) (Million Cubic Feet) Natural Gas Delivered to Consumers in Minnesota (Including Vehicle Fuel) (Million Cubic Feet) Year Jan Feb Mar Apr May Jun ...

  16. Draft Site-Wide Environmental Impact Statement Nevada | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Draft Site-Wide Environmental Impact Statement Nevada Draft site-wide environmental impact statement for the continued operation of the DOE/NNSA Nevada National Security Site and off-site locations in the State of Nevada The U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA) is pleased to present the "Draft Site-Wide Environmental Impact Statement for the Continued Operation of the Department of Energy/National Nuclear

  17. NNSS Final Site-Wide Environmental Impact Statement (SWEIS) | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) NNSS Final Site-Wide Environmental Impact Statement (SWEIS) Final Site-Wide Environmental Impact Statement (SWEIS) On February 14, 2013, the Final Site-Wide Environmental Impact Statement for the Continued Operation of the Nevada National Security Site and Off-Site Locations in the State of Nevada was published. Available electronically and in hard copy, the document can be obtained by clicking on the links below or calling 702-295-3521. Summary

  18. Wide Bandgap Semiconductors for Clean Energy Workshop | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Wide Bandgap Semiconductors for Clean Energy Workshop Wide Bandgap Semiconductors for Clean Energy Workshop July 25, 2012 A workshop on Wide Bandgap (WBG) Semiconductors for Clean Energy (held July 25, 2012, in Chicago, Illinois) brought together stakeholders from industry and academia to discuss the technical status of WBG semiconductors. The workshop also explored emerging WBG market applications in clean energy and barriers to the development and widespread commercial use of WBG

  19. Interconnection-Wide Transmission Planning Initiative: Topic A,

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Interconnection-Level Analysis and Planning | Department of Energy A, Interconnection-Level Analysis and Planning Interconnection-Wide Transmission Planning Initiative: Topic A, Interconnection-Level Analysis and Planning A description of the requirements for Topic A for all Interconnections under the Interconnection-Wide Transmission Planning Initiative, part of the American Recovery and Reinvestment Act. Interconnection-Wide Transmission Planning Initiative: Topic A, Interconnection-Level

  20. Wide Bandgap Semiconductors: Essential to Our Technology Future |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Wide Bandgap Semiconductors: Essential to Our Technology Future Wide Bandgap Semiconductors: Essential to Our Technology Future January 15, 2014 - 8:00am Addthis Learn how wide bandgap semiconductors could impact clean energy technology and our daily lives. | Video by Sarah Gerrity and Matty Greene, Energy Department. Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy What are the key facts? North Carolina State University will lead the Energy Department's new

  1. DOE-Wide NEPA Contracting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOE-Wide NEPA Contracting DOE-Wide NEPA Contracting The DOE-wide NEPA contracts expired in 2014. These contracts were for NEPA support services in preparing EISs and EAs and other environmental documents. This page will be updated when new information is available. Inquiries may be addressed to askNEPA@hq.doe.gov. Document(s) Available For Download December 1, 1996 NEPA Contracting Reform Guidance (DOE, 1996) This guidance provides: model statements of work, information on contract types and

  2. Development of autonomous magnetometer rotorcraft for wide area assessment

    SciTech Connect

    Roelof Versteeg; Matt Anderson; Les Beard; Eric Corban; Darryl Curley; Jeff Gamey; Ross Johnson; Dwight Junkin; Mark McKay; Jared Salzmann; Mikhail Tchernychev; Suraj Unnikrishnan; Scott Vinson

    2010-04-01

    Large areas across the United States are potentially contaminated with UXO, with some ranges encompassing tens to hundreds of thousands of acres. Technologies are needed which will allow for cost effective wide area scanning with 1) near 100 % coverage and 2) near 100 % detection of subsurface ordnance or features indicative of subsurface ordnance. The current approach to wide area assessment is a multi-level one, in which medium - altitude fixed wing optical imaging is used for an initial site assessment. This assessment is followed with low altitude manned helicopter based magnetometry. Subsequent to this wide area assessment targeted surface investigations are performed using either towed geophysical sensor arrays or man portable sensors. In order to be an effective tool for small UXO detection, the sensing altitude for magnetic site investigations needs to be on the order of 1 – 3 meters. These altitude requirements mean that manned helicopter surveys will generally only be feasible in large, open and relatively flat terrains. While such surveys are effective in mapping large areas relatively fast there are substantial mobilization/demobilization, staffing and equipment costs associated with these surveys (resulting in costs of approximately $100-$150/acre). In addition, due to the low altitude there are substantial risks to pilots and equipment. Surface towed arrays provide high resolution maps but have other limitations, e.g. in their ability to navigate rough terrain effectively. There is thus a need for other systems which can be used for effective data collection. An UAV (Unmanned Aerial Vehicle) magnetometer platform is an obvious alternative. The motivation behind such a system is that it reduces risk to operators, is lower in initial and Operational and Maintenance (O&M) costs (and can thus potentially be applied to smaller sites) and has the potential of being more effective in terms of detection and possibly characterization (through the use of

  3. Genome Wide Evaluation of Normal Human Tissue in Response to...

    Office of Scientific and Technical Information (OSTI)

    Wide Evaluation of Normal Human Tissue in Response to Controlled, In vivo Low-Dose Low LET Ionizing Radiation Exposure: Pathways and Mechanisms Final Report, September 2013 Rocke,...

  4. Microfabricated BTU monitoring device for system-wide natural...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Microfabricated BTU monitoring device for system-wide natural gas monitoring. Citation Details In-Document Search Title: Microfabricated BTU monitoring device for ...

  5. Webinar October 21: Opportunities for Wide Bandgap Semiconductor...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Articles DOE Announces Webinars on High Performance Space Conditioning Systems, Davis-Bacon Act Compliance, and More DOE Announces Webinars on Zero Energy Ready Homes, Wide...

  6. EIS-0238: Draft Site-Wide Environmental Impact Statement

    Energy.gov [DOE]

    Draft Site-Wide Environmental Impact Statement on the Continued Operation of the Los Alamos National Laboratory, Los Alamos, New Mexico

  7. EIS-0426: Site-Wide Environmental Impact Statement for Continued...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Site-Wide Environmental Impact Statement for Continued Operation of the Department of Energy National Nuclear Security Administration Nevada National Security Site and Off-Site ...

  8. EA-1956: Site-Wide Environmental Assessment for the Divestiture...

    Office of Environmental Management (EM)

    Assessment for the Divestiture of Rocky Mountain Oilfield Testing Center and Naval Petroleum Reserve No. 3, Natrona County, Wyoming EA-1956: Site-Wide Environmental Assessment...

  9. Guidance for Site-wide Environmental Impact Statements (DOE,...

    Office of Environmental Management (EM)

    Recommendations on Alternative Analysis in Site-wide NEPA Reviews (DOE, 1992) EIS-0225: Amended Notice of Intent to Prepare an Environmental Impact Statement EIS-0225-SA-03: ...

  10. Fiscal Year 2015 Vehicle Technologies Program Wide Funding Opportunity...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fiscal Year 2015 Vehicle Technologies Program Wide Funding Opportunity Announcement Selections The list of 24 awardees given funds to develop and deploy cutting-edge vehicle ...

  11. EA-1956: Draft Site-Wide Environmental Assessment

    Office of Energy Efficiency and Renewable Energy (EERE)

    Site-Wide Environmental Assessment for the Divestiture of Rocky Mountain Oilfield Testing Center and Naval Petroleum Reserve No. 3, Natrona County, Wyoming

  12. Language barrier broken with Multilingual WorldWideScience.org...

    Office of Scientific and Technical Information (OSTI)

    Hey, Microsoft Research Corporate Vice-President; Richard Boulderstone of the British Library and the WorldWideScience Alliance Chairman; and Wu Yishan, Institute of Scientific and ...

  13. Blog advises: Stop traipsing the World Wide Web, start searching

    Office of Scientific and Technical Information (OSTI)

    WorldWideScience | OSTI, US Dept of Energy Office of Scientific and Technical Information Blog advises: Stop traipsing the World Wide Web, start searching WorldWideScience Back to the OSTI News Listing for 2012 A blog from the American Printing House for the Blind gives an assessment of WorldWideScience.org: "In terms that the rest of us can understand, this website is a way for researchers, scientists, students, and science enthusiasts to search worldwide science databases all at once.

  14. EIS-0281: Final Site-Wide Environmental Impact Statement | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EIS-0281: Final Site-Wide Environmental Impact Statement Sandia National LaboratoriesNew Mexico DOE proposes to continue operating the Sandia National LaboratoriesNew Mexico ...

  15. Wide range modeling study of dimethyl ether oxidation

    SciTech Connect

    Pitz, W.J.; Marinov, N.M.; Westbrook, C.K.; Dagaut, P.; Boettner, J-C; Cathonnet, M.

    1997-04-01

    A detailed chemical kinetic model has been used to study dimethyl ether (DME) oxidation over a wide range of conditions. Experimental results obtained in a jet-stirred reactor (JSR) at I and 10 atm, 0.2 < 0 < 2.5, and 800 < T < 1300 K were modeled, in addition to those generated in a shock tube at 13 and 40 bar, 0 = 1.0 and 650 :5 T :5 1300 K. The JSR results are particularly valuable as they include concentration profiles of reactants, intermediates and products pertinent to the oxidation of DME. These data test the Idnetic model severely, as it must be able to predict the correct distribution and concentrations of intermediate and final products formed in the oxidation process. Additionally, the shock tube results are very useful, as they were taken at low temperatures and at high pressures, and thus undergo negative temperature dependence (NTC) behavior. This behavior is characteristic of the oxidation of saturated hydrocarbon fuels, (e.g. the primary reference fuels, n-heptane and iso- octane) under similar conditions. The numerical model consists of 78 chemical species and 336 chemical reactions. The thermodynamic properties of unknown species pertaining to DME oxidation were calculated using THERM.

  16. Example Retro-Commissioning Scope of Work to Include Services...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Retro-Commissioning Scope of Work to Include Services as Part of an ESPC Investment-Grade Audit Example Retro-Commissioning Scope of Work to Include Services as Part of an ESPC ...

  17. SWS Online Tool now includes Multifamily Content, plus a How...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    SWS Online Tool now includes Multifamily Content, plus a How-To Webinar SWS Online Tool now includes Multifamily Content, plus a How-To Webinar This announcement contains ...

  18. Natural Gas Delivered to Consumers in New Mexico (Including Vehicle...

    Energy Information Administration (EIA) (indexed site)

    Mexico (Including Vehicle Fuel) (Million Cubic Feet) Natural Gas Delivered to Consumers in New Mexico (Including Vehicle Fuel) (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul ...

  19. An improved catalog of halo wide binary candidates

    SciTech Connect

    Allen, Christine; Monroy-Rodríguez, Miguel A.

    2014-08-01

    We present an improved catalog of halo wide binaries compiled from an extensive literature search. Most of our binaries stem from the common proper motion binary catalogs by Allen et al. and Chanamé and Gould, but we have also included binaries from the lists of Ryan and Zapatero-Osorio and Martín. All binaries were carefully checked and their distances and systemic radial velocities are included when available. Probable membership to the halo population was tested by means of reduced proper motion diagrams for 251 candidate halo binaries. After eliminating obvious disk binaries, we ended up with 211 probable halo binaries, 150 of which have radial velocities available. We compute galactic orbits for these 150 binaries and calculate the time they spend within the galactic disk. Considering the full sample of 251 candidate halo binaries as well as several subsamples, we find that the distribution of angular separations (or expected major semiaxes) follows a power law f(a) ∼ a {sup –1} (Oepik's relation) up to different limits. For the 50 most disk-like binaries, those that spend their entire lives within z = ±500 pc, this limit is found to be 19,000 AU (0.09 pc), while for the 50 most halo-like binaries, those that spend on average only 18% of their lives within z = ±500 pc, the limit is 63,000 AU (0.31 pc). In a companion paper, we employ this catalog to establish limits on the masses of the halo massive perturbers (massive compact halo objects).

  20. Microfluidic devices and methods including porous polymer monoliths

    Office of Scientific and Technical Information (OSTI)

    (Patent) | DOEPatents devices and methods including porous polymer monoliths Title: Microfluidic devices and methods including porous polymer monoliths Microfluidic devices and methods including porous polymer monoliths are described. Polymerization techniques may be used to generate porous polymer monoliths having pores defined by a liquid component of a fluid mixture. The fluid mixture may contain iniferters and the resulting porous polymer monolith may include surfaces terminated with

  1. EIS-0387: Y-12 National Security Complex Site-Wide Environmental Impact Statement, Oak Ridge, Tennessee

    Energy.gov [DOE]

    This Final Y-12 Site-wide EIS analyzed the potential environmental impacts of the reasonable alternatives for ongoing and foreseeable future operations and activities at Y-12, including alternatives for changes to site infrastructure and levels of operation (using production capacity as the key metric for comparison).

  2. Interconnection-Wide Transmission Planning Initiative - Meeting Calendars |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Interconnection-Wide Transmission Planning Initiative - Meeting Calendars Interconnection-Wide Transmission Planning Initiative - Meeting Calendars Click on the links below to access each awardee's meeting and events calendar. Eastern Interconnection Topic A Awardee: Eastern Interconnection Planning Collaborative Topic B Awardee: Eastern Interconnection States' Planning Council Western Interconnection Topic A Awardee: Western Electricity Coordinating Council Topic B

  3. Percentage of Total Natural Gas Industrial Deliveries included in Prices

    Energy Information Administration (EIA) (indexed site)

    City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices Industrial Price Percentage of Total Industrial Deliveries included in Prices Electric Power Price Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area Mar-16 Apr-16 May-16 Jun-16 Jul-16 Aug-16 View History U.S.

  4. Percentage of Total Natural Gas Residential Deliveries included in Prices

    Energy Information Administration (EIA) (indexed site)

    City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices Industrial Price Percentage of Total Industrial Deliveries included in Prices Electric Power Price Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area Mar-16 Apr-16 May-16 Jun-16 Jul-16 Aug-16 View History U.S.

  5. Microfluidic devices and methods including porous polymer monoliths

    Office of Scientific and Technical Information (OSTI)

    (Patent) | SciTech Connect Patent: Microfluidic devices and methods including porous polymer monoliths Citation Details In-Document Search Title: Microfluidic devices and methods including porous polymer monoliths Microfluidic devices and methods including porous polymer monoliths are described. Polymerization techniques may be used to generate porous polymer monoliths having pores defined by a liquid component of a fluid mixture. The fluid mixture may contain iniferters and the resulting

  6. Introduction to Small-Scale Photovoltaic Systems (Including RETScreen...

    OpenEI (Open Energy Information) [EERE & EIA]

    Photovoltaic Systems (Including RETScreen Case Study) (Webinar) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Introduction to Small-Scale Photovoltaic Systems...

  7. Natural Gas Deliveries to Commercial Consumers (Including Vehicle...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    California (Million Cubic Feet) Natural Gas Deliveries to Commercial Consumers (Including Vehicle Fuel through 1996) in California (Million Cubic Feet) Year Jan Feb Mar Apr May Jun ...

  8. DOE Releases Request for Information on Critical Materials, Including...

    Energy.gov [DOE] (indexed site)

    including fuel cell platinum group metal catalysts. ... on issues related to the demand, supply, opportunities for ... Announces Second RFI on Rare Earth Metals DOE Announces RFI ...

  9. Numerical simulations for low energy nuclear reactions including...

    Office of Scientific and Technical Information (OSTI)

    Numerical simulations for low energy nuclear reactions including direct channels to validate statistical models Citation Details In-Document Search Title: Numerical simulations for ...

  10. U-182: Microsoft Windows Includes Some Invalid Certificates

    Energy.gov [DOE]

    The operating system includes some invalid intermediate certificates. The vulnerability is due to the certificate authorities and not the operating system itself.

  11. Natural Gas Deliveries to Commercial Consumers (Including Vehicle...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Virginia (Million Cubic Feet) Natural Gas Deliveries to Commercial Consumers (Including Vehicle Fuel through 1996) in Virginia (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul...

  12. Numerical simulations for low energy nuclear reactions including...

    Office of Scientific and Technical Information (OSTI)

    Numerical simulations for low energy nuclear reactions including direct channels to ... Visit OSTI to utilize additional information resources in energy science and technology. A ...

  13. Microfluidic devices and methods including porous polymer monoliths...

    Office of Scientific and Technical Information (OSTI)

    The fluid mixture may contain iniferters and the resulting porous polymer monolith may include surfaces terminated with iniferter species. Capture molecules may then be grafted to ...

  14. Introduction to Small-Scale Wind Energy Systems (Including RETScreen...

    OpenEI (Open Energy Information) [EERE & EIA]

    Case Study) (Webinar) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Introduction to Small-Scale Wind Energy Systems (Including RETScreen Case Study) (Webinar) Focus...

  15. Percentage of Total Natural Gas Industrial Deliveries included...

    Gasoline and Diesel Fuel Update

    Price Percentage of Total Industrial Deliveries included in Prices Vehicle Fuel Price Electric Power Price Period: Monthly Annual Download Series History Download Series ...

  16. Search for Earth-like planets includes LANL star analysis

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    their interiors. Consortium team members at Los Alamos include Joyce Ann Guzik, Paul Bradley, Arthur N. Cox, and Kim Simmons. They will help interpret the stellar oscillation...

  17. Including Retro-Commissioning in Federal Energy Savings Performance Contracts

    Energy.gov [DOE]

    Document describes guidance on the importance of (and steps to) including retro-commissioning in federal energy savings performance contracts (ESPCs).

  18. Comparison of Joint Modeling Approaches Including Eulerian Sliding...

    Office of Scientific and Technical Information (OSTI)

    Eulerian Sliding Interfaces Citation Details In-Document Search Title: Comparison of Joint Modeling Approaches Including Eulerian Sliding Interfaces You are accessing a ...

  19. Measuring and modeling the lifetime of nitrous oxide including...

    Office of Scientific and Technical Information (OSTI)

    Published Article: Measuring and modeling the lifetime of nitrous oxide including its variability: NITROUS OXIDE AND ITS CHANGING LIFETIME Prev Next Title: Measuring and ...

  20. Solar Energy Education. Reader, Part II. Sun story. [Includes glossary

    SciTech Connect

    Not Available

    1981-05-01

    Magazine articles which focus on the subject of solar energy are presented. The booklet prepared is the second of a four part series of the Solar Energy Reader. Excerpts from the magazines include the history of solar energy, mythology and tales, and selected poetry on the sun. A glossary of energy related terms is included. (BCS)

  1. Microfluidic devices and methods including porous polymer monoliths

    DOEpatents

    Hatch, Anson V.; Sommer, Gregory j.; Singh, Anup K.; Wang, Ying-Chih; Abhyankar, Vinay

    2015-12-01

    Microfluidic devices and methods including porous polymer monoliths are described. Polymerization techniques may be used to generate porous polymer monoliths having pores defined by a liquid component of a fluid mixture. The fluid mixture may contain iniferters and the resulting porous polymer monolith may include surfaces terminated with iniferter species. Capture molecules may then be grafted to the monolith pores.

  2. Microfluidic devices and methods including porous polymer monoliths

    DOEpatents

    Hatch, Anson V; Sommer, Gregory J; Singh, Anup K; Wang, Ying-Chih; Abhyankar, Vinay V

    2014-04-22

    Microfluidic devices and methods including porous polymer monoliths are described. Polymerization techniques may be used to generate porous polymer monoliths having pores defined by a liquid component of a fluid mixture. The fluid mixture may contain iniferters and the resulting porous polymer monolith may include surfaces terminated with iniferter species. Capture molecules may then be grafted to the monolith pores.

  3. Articles which include chevron film cooling holes, and related processes

    DOEpatents

    Bunker, Ronald Scott; Lacy, Benjamin Paul

    2014-12-09

    An article is described, including an inner surface which can be exposed to a first fluid; an inlet; and an outer surface spaced from the inner surface, which can be exposed to a hotter second fluid. The article further includes at least one row or other pattern of passage holes. Each passage hole includes an inlet bore extending through the substrate from the inlet at the inner surface to a passage hole-exit proximate to the outer surface, with the inlet bore terminating in a chevron outlet adjacent the hole-exit. The chevron outlet includes a pair of wing troughs having a common surface region between them. The common surface region includes a valley which is adjacent the hole-exit; and a plateau adjacent the valley. The article can be an airfoil. Related methods for preparing the passage holes are also described.

  4. Turbomachine injection nozzle including a coolant delivery system

    DOEpatents

    Zuo, Baifang (Simpsonville, SC)

    2012-02-14

    An injection nozzle for a turbomachine includes a main body having a first end portion that extends to a second end portion defining an exterior wall having an outer surface. A plurality of fluid delivery tubes extend through the main body. Each of the plurality of fluid delivery tubes includes a first fluid inlet for receiving a first fluid, a second fluid inlet for receiving a second fluid and an outlet. The injection nozzle further includes a coolant delivery system arranged within the main body. The coolant delivery system guides a coolant along at least one of a portion of the exterior wall and around the plurality of fluid delivery tubes.

  5. Benefits of Site-wide NEPA National Environmental Policy Act...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Site-wide reviews can aid the Department of Energy (DOE) in meeting its goals to streamline the NEPA process, to make that process more useful to decision makers and thepublic,...

  6. Language barrier broken with Multilingual WorldWideScience.org...

    Office of Scientific and Technical Information (OSTI)

    Library and the WorldWideScience Alliance Chairman; and Wu Yishan, Institute of Scientific and Technical Information of China (ISTIC) Chief Engineer Last updated on Tuesday 17 May

  7. DOE Traineeship In Power Engineering (Leveraging Wide Bandgap Power Electronics)

    Energy.gov [DOE]

    The Advanced Manufacturing Office announced up to $10 million is available to establish 5-year graduate-level university-led DOE Traineeship(s) in Power Engineering (leveraging emerging Wide...

  8. Department-wide Quick Reaction Work Order System

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1981-03-12

    To describe the new Department Wide Quick Reaction Work Order System, to establish the criteria and procedures for its use, and to identify responsibilities for managing and operating the system.

  9. Wide Bandgap Semiconductors for Clean Energy Workshop Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Wide Bandgap Semiconductors for Clean Energy Workshop ... In the same way that the invention of the silicon chip 50 ... example, as switch-mode power supplies and solar inverters. ...

  10. A Study of Transport Protocols for Wide Area Scientific Applications

    SciTech Connect

    Vishal Misra

    2011-03-01

    This is the final project report of award "A Study of Transport Protocols for Wide Area Scientific Applications", given by DOE in 2003 to Vishal Misra at Columbia University.

  11. Federal Register Notice: National Nuclear Security Administration Site-Wide

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Environmental Impact Statement for Sandia National Laboratories, New Mexico (SNL/NM) | Department of Energy Register Notice: National Nuclear Security Administration Site-Wide Environmental Impact Statement for Sandia National Laboratories, New Mexico (SNL/NM) Federal Register Notice: National Nuclear Security Administration Site-Wide Environmental Impact Statement for Sandia National Laboratories, New Mexico (SNL/NM) Federal Register / Vol. 76, No. 156 / Friday, August 12, 2011 / Notices.

  12. Fiscal Year 2015 Vehicle Technologies Program Wide Funding Opportunity

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Announcement Selections | Department of Energy Program Wide Funding Opportunity Announcement Selections Fiscal Year 2015 Vehicle Technologies Program Wide Funding Opportunity Announcement Selections The list of 24 awardees given funds to develop and deploy cutting-edge vehicle technologies that will strengthen the U.S. clean energy economy. These technologies will play a key role in increasing fuel efficiency and reducing petroleum consumption, while also supporting the Energy Department's

  13. Proposed Energy Transport Corridors: West-wide energy corridor programmatic

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EIS, Draft Corridors - September 2007. | Department of Energy Proposed Energy Transport Corridors: West-wide energy corridor programmatic EIS, Draft Corridors - September 2007. Proposed Energy Transport Corridors: West-wide energy corridor programmatic EIS, Draft Corridors - September 2007. Map of the area covered by a programmatic environmental impact statement (PEIS), "Designation of Energy Corridors on Federal Land in the 11 Western States" (DOE/EIS-0386) to address the

  14. Interconnection-Wide Transmission Planning Initiative: Topic B, Cooperation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Among States in the Eastern Interconnection on Electric Resource Planning and Priorities | Department of Energy Eastern Interconnection on Electric Resource Planning and Priorities Interconnection-Wide Transmission Planning Initiative: Topic B, Cooperation Among States in the Eastern Interconnection on Electric Resource Planning and Priorities A description of the requirements for Topic B for the Eastern Interconnection under the Interconnection-Wide Transmission Planning Initiative, part of

  15. Interconnection-Wide Transmission Planning Initiative: Topic B, Cooperation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Among States in the Western Interconnection on Electric Resource Planning and Priorities | Department of Energy Western Interconnection on Electric Resource Planning and Priorities Interconnection-Wide Transmission Planning Initiative: Topic B, Cooperation Among States in the Western Interconnection on Electric Resource Planning and Priorities A description of the requirements for Topic B for the Western Interconnection under the Interconnection-Wide Transmission Planning Initiative, part of

  16. Interconnection-Wide Transmission Planning Initiative: Topic B, State

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Agency Input Regarding Electric Resource and Transmission Planning in the Texas Interconnection | Department of Energy State Agency Input Regarding Electric Resource and Transmission Planning in the Texas Interconnection Interconnection-Wide Transmission Planning Initiative: Topic B, State Agency Input Regarding Electric Resource and Transmission Planning in the Texas Interconnection A description of the requirements for Topic B for the Texas Interconnect under the Interconnection-Wide

  17. Removal of mineral matter including pyrite from coal

    DOEpatents

    Reggel, Leslie; Raymond, Raphael; Blaustein, Bernard D.

    1976-11-23

    Mineral matter, including pyrite, is removed from coal by treatment of the coal with aqueous alkali at a temperature of about 175.degree. to 350.degree. C, followed by acidification with strong acid.

  18. Virginia Senate Approves Budget Deal to Include Money for FEL...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Virginia Senate Approves Budget Deal to Include Money for FEL (Daily Press) External Link: http:articles.dailypress.com2012-04-18newsdp-nws-general-assembly-budget-da... By ...

  19. T-603: Mac OS X Includes Some Invalid Comodo Certificates

    Office of Energy Efficiency and Renewable Energy (EERE)

    The operating system includes some invalid certificates. The vulnerability is due to the invalid certificates and not the operating system itself. Other browsers, applications, and operating systems are affected.

  20. Energy Department Expands Gas Gouging Reporting System to Include...

    Energy Saver

    Expands Gas Gouging Reporting System to Include 1-800 Number: 1-800-244-3301 Energy Department Expands Gas ... of reformulated gasoline in storage and is already helping to ...

  1. Natural Gas Deliveries to Commercial Consumers (Including Vehicle...

    Energy Information Administration (EIA) (indexed site)

    Mexico (Million Cubic Feet) Natural Gas Deliveries to Commercial Consumers (Including Vehicle Fuel through 1996) in New Mexico (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul ...

  2. Including Retro-Commissioning in Federal Energy Savings Performance...

    Energy Saver

    the cost of the survey. Developing a detailed scope of work and a fixed price for this work is important to eliminate risk to the Agency and the ESCo. Including a detailed scope...

  3. Natural Gas Delivered to Consumers in Ohio (Including Vehicle...

    Energy Information Administration (EIA) (indexed site)

    Natural Gas Delivered to Consumers in Ohio (Including Vehicle Fuel) (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2001 136,340 110,078 102,451 66,525 ...

  4. Hybrid powertrain system including smooth shifting automated transmission

    DOEpatents

    Beaty, Kevin D.; Nellums, Richard A.

    2006-10-24

    A powertrain system is provided that includes a prime mover and a change-gear transmission having an input, at least two gear ratios, and an output. The powertrain system also includes a power shunt configured to route power applied to the transmission by one of the input and the output to the other one of the input and the output. A transmission system and a method for facilitating shifting of a transmission system are also provided.

  5. Prevention of Harassment (Including Sexual Harassment) and Retaliation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Policy Statement | Department of Energy Prevention of Harassment (Including Sexual Harassment) and Retaliation Policy Statement Prevention of Harassment (Including Sexual Harassment) and Retaliation Policy Statement DOE Policy for Preventing Harassment in the Workplace Harassment Policy July 2011.pdf (112.57 KB) More Documents & Publications Policy Statement on Equal Employment Opportunity, Harassment, and Retaliation Equal Employment Opportunity and Diversity Policy Statement VWA-0039 -

  6. Limited Personal Use of Government Office Equipment including Information Technology

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2005-01-07

    The Order establishes requirements and assigns responsibilities for employees' limited personal use of Government resources (office equipment and other resources including information technology) within DOE, including NNSA. The Order is required to provide guidance on appropriate and inappropriate uses of Government resources. This Order was certified 04/23/2009 as accurate and continues to be relevant and appropriate for use by the Department. Certified 4-23-09. No cancellation.

  7. A model for heterogeneous materials including phase transformations

    SciTech Connect

    Addessio, F.L.; Clements, B.E.; Williams, T.O.

    2005-04-15

    A model is developed for particulate composites, which includes phase transformations in one or all of the constituents. The model is an extension of the method of cells formalism. Representative simulations for a single-phase, brittle particulate (SiC) embedded in a ductile material (Ti), which undergoes a solid-solid phase transformation, are provided. Also, simulations for a tungsten heavy alloy (WHA) are included. In the WHA analyses a particulate composite, composed of tungsten particles embedded in a tungsten-iron-nickel alloy matrix, is modeled. A solid-liquid phase transformation of the matrix material is included in the WHA numerical calculations. The example problems also demonstrate two approaches for generating free energies for the material constituents. Simulations for volumetric compression, uniaxial strain, biaxial strain, and pure shear are used to demonstrate the versatility of the model.

  8. Metal vapor laser including hot electrodes and integral wick

    DOEpatents

    Ault, E.R.; Alger, T.W.

    1995-03-07

    A metal vapor laser, specifically one utilizing copper vapor, is disclosed herein. This laser utilizes a plasma tube assembly including a thermally insulated plasma tube containing a specific metal, e.g., copper, and a buffer gas therein. The laser also utilizes means including hot electrodes located at opposite ends of the plasma tube for electrically exciting the metal vapor and heating its interior to a sufficiently high temperature to cause the metal contained therein to vaporize and for subjecting the vapor to an electrical discharge excitation in order to lase. The laser also utilizes external wicking arrangements, that is, wicking arrangements located outside the plasma tube. 5 figs.

  9. Tunable cavity resonator including a plurality of MEMS beams

    DOEpatents

    Peroulis, Dimitrios; Fruehling, Adam; Small, Joshua Azariah; Liu, Xiaoguang; Irshad, Wasim; Arif, Muhammad Shoaib

    2015-10-20

    A tunable cavity resonator includes a substrate, a cap structure, and a tuning assembly. The cap structure extends from the substrate, and at least one of the substrate and the cap structure defines a resonator cavity. The tuning assembly is positioned at least partially within the resonator cavity. The tuning assembly includes a plurality of fixed-fixed MEMS beams configured for controllable movement relative to the substrate between an activated position and a deactivated position in order to tune a resonant frequency of the tunable cavity resonator.

  10. Metal vapor laser including hot electrodes and integral wick

    DOEpatents

    Ault, Earl R.; Alger, Terry W.

    1995-01-01

    A metal vapor laser, specifically one utilizing copper vapor, is disclosed herein. This laser utilizes a plasma tube assembly including a thermally insulated plasma tube containing a specific metal, e.g., copper, and a buffer gas therein. The laser also utilizes means including hot electrodes located at opposite ends of the plasma tube for electrically exciting the metal vapor and heating its interior to a sufficiently high temperature to cause the metal contained therein to vaporize and for subjecting the vapor to an electrical discharge excitation in order to lase. The laser also utilizes external wicking arrangements, that is, wicking arrangements located outside the plasma tube.

  11. Solar Energy Education. Renewable energy: a background text. [Includes glossary

    SciTech Connect

    Not Available

    1985-01-01

    Some of the most common forms of renewable energy are presented in this textbook for students. The topics include solar energy, wind power hydroelectric power, biomass ocean thermal energy, and tidal and geothermal energy. The main emphasis of the text is on the sun and the solar energy that it yields. Discussions on the sun's composition and the relationship between the earth, sun and atmosphere are provided. Insolation, active and passive solar systems, and solar collectors are the subtopics included under solar energy. (BCS)

  12. Methods of producing adsorption media including a metal oxide

    SciTech Connect

    Mann, Nicholas R; Tranter, Troy J

    2014-03-04

    Methods of producing a metal oxide are disclosed. The method comprises dissolving a metal salt in a reaction solvent to form a metal salt/reaction solvent solution. The metal salt is converted to a metal oxide and a caustic solution is added to the metal oxide/reaction solvent solution to adjust the pH of the metal oxide/reaction solvent solution to less than approximately 7.0. The metal oxide is precipitated and recovered. A method of producing adsorption media including the metal oxide is also disclosed, as is a precursor of an active component including particles of a metal oxide.

  13. DOE Considers Natural Gas Utility Service Options: Proposal Includes

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    30-mile Natural Gas Pipeline from Pasco to Hanford | Department of Energy Considers Natural Gas Utility Service Options: Proposal Includes 30-mile Natural Gas Pipeline from Pasco to Hanford DOE Considers Natural Gas Utility Service Options: Proposal Includes 30-mile Natural Gas Pipeline from Pasco to Hanford January 23, 2012 - 12:00pm Addthis Media Contacts Cameron Hardy, DOE , (509) 376-5365, Cameron.Hardy@rl.doe.gov RICHLAND, WASH. - The U.S. Department of Energy (DOE) is considering

  14. Thin film solar cell including a spatially modulated intrinsic layer

    SciTech Connect

    Guha, Subhendu; Yang, Chi-Chung; Ovshinsky, Stanford R.

    1989-03-28

    One or more thin film solar cells in which the intrinsic layer of substantially amorphous semiconductor alloy material thereof includes at least a first band gap portion and a narrower band gap portion. The band gap of the intrinsic layer is spatially graded through a portion of the bulk thickness, said graded portion including a region removed from the intrinsic layer-dopant layer interfaces. The band gap of the intrinsic layer is always less than the band gap of the doped layers. The gradation of the intrinsic layer is effected such that the open circuit voltage and/or the fill factor of the one or plural solar cell structure is enhanced.

  15. Information regarding previous INCITE awards including selected highlights

    Office of Science (SC)

    | U.S. DOE Office of Science (SC) Information regarding previous INCITE awards including selected highlights Advanced Scientific Computing Research (ASCR) ASCR Home About Research Facilities User Facilities Accessing ASCR Facilities Innovative & Novel Computational Impact on Theory & Experiement (INCITE) ASCR Leadership Computing Challenge (ALCC) Industrial Users Computational Science Graduate Fellowship (CSGF) Research & Evaluation Prototypes (REP) Science Highlights Benefits of

  16. cDNA encoding a polypeptide including a hevein sequence

    DOEpatents

    Raikhel, N.V.; Broekaert, W.F.; Namhai Chua; Kush, A.

    1993-02-16

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1,018 nucleotides long and includes an open reading frame of 204 amino acids.

  17. OSTI Salutes Librarians (including its own!), National Librarian Week

    Office of Scientific and Technical Information (OSTI)

    (April 8-14) | OSTI, US Dept of Energy Office of Scientific and Technical Information Salutes Librarians (including its own!), National Librarian Week (April 8-14) Back to the OSTI News Listing for 2012 Thanks to librarians across the nation for their commitment to ensuring access to information. OSTI, with its own cadre of Masters-level librarians, connects with university research departments and libraries to increase awareness of the U.S. Department of Energy's valuable scientific and

  18. [Article 1 of 7: Motivates and Includes the Consumer]

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2 of 7: Research on the Characteristics of a Modern Grid by the NETL Modern Grid Strategy Team Accommodates All Generation and Storage Options Last month we presented the first Principal Characteristic of a Modern Grid, "Motivates and Includes the Consumer". This month we present a second characteristic, "Accommodates All Generation and Storage Options". This characteristic will fundamentally transition today's grid from a centralized model for generation to one that also has

  19. [Article 1 of 7: Motivates and Includes the Consumer]

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Series on the Seven Principal Characteristics of the Modern Grid [Article 1 of 7: Motivates and Includes the Consumer] In October 2007, Ken Silverstein (Energy Central) wrote an editorial, "Empowering Consumers" that hit a strong, kindred chord with the DOE/National Energy Technology Laboratory (NETL) Modern Grid Strategy team. Through subsequent discussions with Ken and Bill Opalka, Editor- In-Chief, Topics Centers, we decided it would be informative to the industry if the Modern Grid

  20. Evaporative cooler including one or more rotating cooler louvers

    DOEpatents

    Gerlach, David W

    2015-02-03

    An evaporative cooler may include an evaporative cooler housing with a duct extending therethrough, a plurality of cooler louvers with respective porous evaporative cooler pads, and a working fluid source conduit. The cooler louvers are arranged within the duct and rotatably connected to the cooler housing along respective louver axes. The source conduit provides an evaporative cooler working fluid to the cooler pads during at least one mode of operation.

  1. Conversion of geothermal waste to commercial products including silica

    DOEpatents

    Premuzic, Eugene T.; Lin, Mow S.

    2003-01-01

    A process for the treatment of geothermal residue includes contacting the pigmented amorphous silica-containing component with a depigmenting reagent one or more times to depigment the silica and produce a mixture containing depigmented amorphous silica and depigmenting reagent containing pigment material; separating the depigmented amorphous silica and from the depigmenting reagent to yield depigmented amorphous silica. Before or after the depigmenting contacting, the geothermal residue or depigmented silica can be treated with a metal solubilizing agent to produce another mixture containing pigmented or unpigmented amorphous silica-containing component and a solubilized metal-containing component; separating these components from each other to produce an amorphous silica product substantially devoid of metals and at least partially devoid of pigment. The amorphous silica product can be neutralized and thereafter dried at a temperature from about 25.degree. C. to 300.degree. C. The morphology of the silica product can be varied through the process conditions including sequence contacting steps, pH of depigmenting reagent, neutralization and drying conditions to tailor the amorphous silica for commercial use in products including filler for paint, paper, rubber and polymers, and chromatographic material.

  2. Electrolytes including fluorinated solvents for use in electrochemical cells

    DOEpatents

    Tikhonov, Konstantin; Yip, Ka Ki; Lin, Tzu-Yuan

    2015-07-07

    Provided are electrochemical cells and electrolytes used to build such cells. The electrolytes include ion-supplying salts and fluorinated solvents capable of maintaining single phase solutions with the salts at between about -30.degree. C. to about 80.degree. C. The fluorinated solvents, such as fluorinated carbonates, fluorinated esters, and fluorinated esters, are less flammable than their non-fluorinated counterparts and increase safety characteristics of cells containing these solvents. The amount of fluorinated solvents in electrolytes may be between about 30% and 80% by weight not accounting weight of the salts. Fluorinated salts, such as fluoroalkyl-substituted LiPF.sub.6, fluoroalkyl-substituted LiBF.sub.4 salts, linear and cyclic imide salts as well as methide salts including fluorinated alkyl groups, may be used due to their solubility in the fluorinated solvents. In some embodiments, the electrolyte may also include a flame retardant, such as a phosphazene or, more specifically, a cyclic phosphazene and/or one or more ionic liquids.

  3. Multi-processor including data flow accelerator module

    DOEpatents

    Davidson, George S.; Pierce, Paul E.

    1990-01-01

    An accelerator module for a data flow computer includes an intelligent memory. The module is added to a multiprocessor arrangement and uses a shared tagged memory architecture in the data flow computer. The intelligent memory module assigns locations for holding data values in correspondence with arcs leading to a node in a data dependency graph. Each primitive computation is associated with a corresponding memory cell, including a number of slots for operands needed to execute a primitive computation, a primitive identifying pointer, and linking slots for distributing the result of the cell computation to other cells requiring that result as an operand. Circuitry is provided for utilizing tag bits to determine automatically when all operands required by a processor are available and for scheduling the primitive for execution in a queue. Each memory cell of the module may be associated with any of the primitives, and the particular primitive to be executed by the processor associated with the cell is identified by providing an index, such as the cell number for the primitive, to the primitive lookup table of starting addresses. The module thus serves to perform functions previously performed by a number of sections of data flow architectures and coexists with conventional shared memory therein. A multiprocessing system including the module operates in a hybrid mode, wherein the same processing modules are used to perform some processing in a sequential mode, under immediate control of an operating system, while performing other processing in a data flow mode.

  4. Photocell utilizing a wide-bandgap semiconductor material

    DOEpatents

    Carlson, David E.; Williams, Brown F.

    1984-06-05

    A photocell comprises a p-i-n amorphous silicon structure having a wide bandgap layer adjacent to either the p-type or n-type layer. This structure reduces the absorption of light entering the photocell and the back-diffusion of minority carriers.

  5. Sandia National Laboratories Site-Wide Environmental Impact Statement |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | (NNSA) Sandia National Laboratories Site-Wide Environmental Impact Statement Documents SNL NOI Federal Register Notice 2011-15951 SNL Facility Poster 1 SNL Facility Poster 2 SNL Facility Poster 3 SNL Fact Sheet SNL SWEIS Fact Sheet

  6. Method of depositing wide bandgap amorphous semiconductor materials

    DOEpatents

    Ellis, Jr., Frank B.; Delahoy, Alan E.

    1987-09-29

    A method of depositing wide bandgap p type amorphous semiconductor materials on a substrate without photosensitization by the decomposition of one or more higher order gaseous silanes in the presence of a p-type catalytic dopant at a temperature of about 200.degree. C. and a pressure in the range from about 1-50 Torr.

  7. Wide band focusing x-ray spectrograph with spatial resolution

    SciTech Connect

    Pikuz, S. A.; Douglass, J. D.; Shelkovenko, T. A.; Sinars, D. B.; Hammer, D. A.

    2008-01-15

    A new, wide spectral bandwidth x-ray spectrograph, the wide-bandwidth focusing spectrograph with spatial resolution (WB-FSSR), based on spherically bent mica crystals, is described. The wide bandwidth is achieved by combining three crystals to form a large aperture dispersive element. Since the WB-FSSR covers a wide spectral band, it is very convenient for application as a routine diagnostic tool in experiments in which the desired spectral coverage is different from one test to the next. The WB-FSSR has been tested in imploding wire-array experiments on a 1 MA pulsed power machine, and x-ray spectra were recorded in the 1-20 A spectral band using different orders of mica crystal reflection. Using a two mirror-symmetrically placed WB-FSSR configuration, it was also possible to distinguish between a real spectral shift and a shift of recorded spectral lines caused by the spatial distribution of the radiating plasma. A spectral resolution of about 2000 was demonstrated and a spatial resolution of {approx}100 {mu}m was achieved in the spectral band of 5-10 A in second order of mica reflection. A simple method of numerical analysis of spectrograph capability is proposed.

  8. A coke oven model including thermal decomposition kinetics of tar

    SciTech Connect

    Munekane, Fuminori; Yamaguchi, Yukio; Tanioka, Seiichi

    1997-12-31

    A new one-dimensional coke oven model has been developed for simulating the amount and the characteristics of by-products such as tar and gas as well as coke. This model consists of both heat transfer and chemical kinetics including thermal decomposition of coal and tar. The chemical kinetics constants are obtained by estimation based on the results of experiments conducted to investigate the thermal decomposition of both coal and tar. The calculation results using the new model are in good agreement with experimental ones.

  9. cDNA encoding a polypeptide including a hevein sequence

    DOEpatents

    Raikhel, Natasha V.; Broekaert, Willem F.; Chua, Nam-Hai; Kush, Anil

    1993-02-16

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a pu GOVERNMENT RIGHTS This application was funded under Department of Energy Contract DE-AC02-76ER01338. The U.S. Government has certain rights under this application and any patent issuing thereon.

  10. Composite material including nanocrystals and methods of making

    DOEpatents

    Bawendi, Moungi G.; Sundar, Vikram C.

    2008-02-05

    Temperature-sensing compositions can include an inorganic material, such as a semiconductor nanocrystal. The nanocrystal can be a dependable and accurate indicator of temperature. The intensity of emission of the nanocrystal varies with temperature and can be highly sensitive to surface temperature. The nanocrystals can be processed with a binder to form a matrix, which can be varied by altering the chemical nature of the surface of the nanocrystal. A nanocrystal with a compatibilizing outer layer can be incorporated into a coating formulation and retain its temperature sensitive emissive properties

  11. Composite material including nanocrystals and methods of making

    DOEpatents

    Bawendi, Moungi G.; Sundar, Vikram C.

    2010-04-06

    Temperature-sensing compositions can include an inorganic material, such as a semiconductor nanocrystal. The nanocrystal can be a dependable and accurate indicator of temperature. The intensity of emission of the nanocrystal varies with temperature and can be highly sensitive to surface temperature. The nanocrystals can be processed with a binder to form a matrix, which can be varied by altering the chemical nature of the surface of the nanocrystal. A nanocrystal with a compatibilizing outer layer can be incorporated into a coating formulation and retain its temperature sensitive emissive properties.

  12. NREL: Technology Deployment - Cities-LEAP Energy Profile Tool Includes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Data on More than 23,400 U.S. Cities Cities-LEAP Energy Profile Tool Includes Energy Data on More than 23,400 U.S. Cities News NREL Report Examines Energy Use in Cities and Proposes Next Steps for Energy Innovation Publications Citi-Level Energy Decision Making: Data Use in Energy Planning, Implementation, and Evaluation in U.S. Cities Sponsors DOE's Energy Office of Energy Efficiency and Renewable Energy Policy and Analysis Office Related Stories Hawaii's First Net-Zero Energy

  13. Composite armor, armor system and vehicle including armor system

    DOEpatents

    Chu, Henry S.; Jones, Warren F.; Lacy, Jeffrey M.; Thinnes, Gary L.

    2013-01-01

    Composite armor panels are disclosed. Each panel comprises a plurality of functional layers comprising at least an outermost layer, an intermediate layer and a base layer. An armor system incorporating armor panels is also disclosed. Armor panels are mounted on carriages movably secured to adjacent rails of a rail system. Each panel may be moved on its associated rail and into partially overlapping relationship with another panel on an adjacent rail for protection against incoming ordnance from various directions. The rail system may be configured as at least a part of a ring, and be disposed about a hatch on a vehicle. Vehicles including an armor system are also disclosed.

  14. What To Include In The Whistleblower Complaint? | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) To Include In The Whistleblower Complaint? Your complaint does not need to be in any specific form but must be signed by you and contain the following: A statement specifically describing 1. The alleged retaliation taken against you and 2. The disclosure, participation, or refusal that you believe gave rise to the retaliation; A statement that you are not currently pursuing a remedy under State or other applicable law, as described in Sec. 708.15 of this subpart; A

  15. Community Assessment Tool for Public Health Emergencies Including Pandemic Influenza

    SciTech Connect

    ORAU's Oak Ridge Institute for Science Education

    2011-04-14

    The Community Assessment Tool (CAT) for Public Health Emergencies Including Pandemic Influenza (hereafter referred to as the CAT) was developed as a result of feedback received from several communities. These communities participated in workshops focused on influenza pandemic planning and response. The 2008 through 2011 workshops were sponsored by the Centers for Disease Control and Prevention (CDC). Feedback during those workshops indicated the need for a tool that a community can use to assess its readiness for a disaster - readiness from a total healthcare perspective, not just hospitals, but the whole healthcare system. The CAT intends to do just that - help strengthen existing preparedness plans by allowing the healthcare system and other agencies to work together during an influenza pandemic. It helps reveal each core agency partners (sectors) capabilities and resources, and highlights cases of the same vendors being used for resource supplies (e.g., personal protective equipment [PPE] and oxygen) by the partners (e.g., public health departments, clinics, or hospitals). The CAT also addresses gaps in the community's capabilities or potential shortages in resources. This tool has been reviewed by a variety of key subject matter experts from federal, state, and local agencies and organizations. It also has been piloted with various communities that consist of different population sizes, to include large urban to small rural communities.

  16. Recent progress and advances in iterative software (including parallel aspects)

    SciTech Connect

    Carey, G.; Young, D.M.; Kincaid, D.

    1994-12-31

    The purpose of the workshop is to provide a forum for discussion of the current state of iterative software packages. Of particular interest is software for large scale engineering and scientific applications, especially for distributed parallel systems. However, the authors will also review the state of software development for conventional architectures. This workshop will complement the other proposed workshops on iterative BLAS kernels and applications. The format for the workshop is as follows: To provide some structure, there will be brief presentations, each of less than five minutes duration and dealing with specific facets of the subject. These will be designed to focus the discussion and to stimulate an exchange with the participants. Issues to be covered include: The evolution of iterative packages, current state of the art, the parallel computing challenge, applications viewpoint, standards, and future directions and open problems.

  17. Hydraulic engine valve actuation system including independent feedback control

    DOEpatents

    Marriott, Craig D

    2013-06-04

    A hydraulic valve actuation assembly may include a housing, a piston, a supply control valve, a closing control valve, and an opening control valve. The housing may define a first fluid chamber, a second fluid chamber, and a third fluid chamber. The piston may be axially secured to an engine valve and located within the first, second and third fluid chambers. The supply control valve may control a hydraulic fluid supply to the piston. The closing control valve may be located between the supply control valve and the second fluid chamber and may control fluid flow from the second fluid chamber to the supply control valve. The opening control valve may be located between the supply control valve and the second fluid chamber and may control fluid flow from the supply control valve to the second fluid chamber.

  18. International energy outlook. Volume 2. Europe (including USSR)

    SciTech Connect

    Jablonski, D.M.

    1982-01-01

    Europe, like the rest of the globe, still is reeling from the blows of energy crises. European countries are finding energy a critical bottom line to their development and future well-being. To reduce energy dependency and improve fiscal balance, the countries are placing increasing emphasis on exploiting their indigenous energy sources. This volume, Volume 2 is a compilation of official US government intelligence reports examining energy trends and related data in 10 European countries: France, Greece, Italy, Netherlands, Norway, Spain, Sweden, West Germany, Yugoslvania and the Soviet Union. The range and detail of country coverage vary, dut to availability of reports. Although the book details current energy situations, its main emphasis is on the future, including estimates of future production and consumption, and descriptions of energy-development plans. The countries not endowed with large petroleum resources are moving toward non-oil sources. 5 references, 65 tables.

  19. Actuator assembly including a single axis of rotation locking member

    DOEpatents

    Quitmeyer, James N.; Benson, Dwayne M.; Geck, Kellan P.

    2009-12-08

    An actuator assembly including an actuator housing assembly and a single axis of rotation locking member fixedly attached to a portion of the actuator housing assembly and an external mounting structure. The single axis of rotation locking member restricting rotational movement of the actuator housing assembly about at least one axis. The single axis of rotation locking member is coupled at a first end to the actuator housing assembly about a Y axis and at a 90.degree. angle to an X and Z axis providing rotation of the actuator housing assembly about the Y axis. The single axis of rotation locking member is coupled at a second end to a mounting structure, and more particularly a mounting pin, about an X axis and at a 90.degree. angle to a Y and Z axis providing rotation of the actuator housing assembly about the X axis. The actuator assembly is thereby restricted from rotation about the Z axis.

  20. Dye laser amplifier including a specifically designed diffuser assembly

    DOEpatents

    Davin, James; Johnston, James P.

    1992-01-01

    A large (high flow rate) dye laser amplifier in which a continuous replened supply of dye is excited by a first light beam, specifically a copper vapor laser beam, in order to amplify the intensity of a second different light beam, specifically a dye beam, passing through the dye is disclosed herein. This amplifier includes a dye cell defining a dye chamber through which a continuous stream of dye is caused to pass at a relatively high flow rate and a specifically designed diffuser assembly for slowing down the flow of dye while, at the same time, assuring that as the dye stream flows through the diffuser assembly it does so in a stable manner.

  1. Aerodynamic analysis of the Darrieus rotor including secondary effects

    SciTech Connect

    Paraschivoiu, I.; Beguler, C.; Delclaux, F.; Fraunie, P.

    1983-09-01

    An aerodynamic analysis is made of two variants of the two-actuator-disk theory for modeling the Darrieus wind turbine. The double-multiple-streamtube model with constant and variable interference factors, including secondary effects, is examined for a Darrieus rotor. The influence of the secondary effects, namely, the blade geometry and profile type, the rotating tower, and the presence of struts and aerodynamic spoilers, is relatively significant, especially at high tip-speed ratios. Variation of the induced velocity as a function of the aximuthal angle allows a more accurate calculation of the aerodynamic loads on the downwind zone of the rotor with respect to the assumed constant interference factors. The theoretical results were compared with available experimental data for the Magdalen Islands wind turbine and Sandia-type machines (straight-line/ circular-arc shape).

  2. Aerodynamic analysis of the Darrieus rotor including secondary effects

    SciTech Connect

    Paraschivoiu, I.; Delclaux, F.; Fraunie, P.; Beguier, C.

    1983-09-01

    An aerodynamic analysis is made of two variants of the two-actuator-disk theory for modeling the Darrieus wind turbine. The double-multiple-streamtube model with constant and variable interference factors, including secondary effects, is examined for a Darrieus rotor. The influence of the secondary effects, namely, the blade geometry and profile type, the rotating tower, and the presence of struts and aerodynamic spoilers, is relatively significant, especially at high tip-speed ratios. Variation of the induced velocity as a function of the azimuthal angle allows a more accurate calculation of the aerodynamic loads on the downwind zone of the rotor with respect to the assumed constant interference factors. The theoretical results were compared with available experimental data for the Magdalen Islands wind turbine and Sandia-type machines (straight-line/circular-arc shape).

  3. Copper laser modulator driving assembly including a magnetic compression laser

    DOEpatents

    Cook, Edward G.; Birx, Daniel L.; Ball, Don G.

    1994-01-01

    A laser modulator (10) having a low voltage assembly (12) with a plurality of low voltage modules (14) with first stage magnetic compression circuits (20) and magnetic assist inductors (28) with a common core (91), such that timing of the first stage magnetic switches (30b) is thereby synchronized. A bipolar second stage of magnetic compression (42) is coupled to the low voltage modules (14) through a bipolar pulse transformer (36) and a third stage of magnetic compression (44) is directly coupled to the second stage of magnetic compression (42). The low voltage assembly (12) includes pressurized boxes (117) for improving voltage standoff between the primary winding assemblies (34) and secondary winding (40) contained therein.

  4. Nijmegen soft-core potential including two-meson exchange

    SciTech Connect

    Stoks, V.G.J.; Rijken, T.A.

    1995-05-10

    We report on the progress of the construction of the extended soft-core (ESC) Nijmegen potential. Next to the standard one-boson-exchange parts, the model includes the pion-meson-exchange potentials due to the parallel and crossed-box diagrams, as well as the one-pair and two-pair diagrams, vertices for which can be identified with similar interactions appearing in chiral-symmetric Lagrangians. Although the ESC potential is still under construction, it already gives an excellent description of all {ital NN} scattering data below 350 MeV with {chi}{sup 2}/datum=1.3. {copyright} {ital 1995} {ital American} {ital Institute} {ital of} {ital Physics}.

  5. Electra-optical device including a nitrogen containing electrolyte

    DOEpatents

    Bates, J.B.; Dudney, N.J.; Gruzalski, G.R.; Luck, C.F.

    1995-10-03

    Described is a thin-film battery, especially a thin-film microbattery, and a method for making same having application as a backup or primary integrated power source for electronic devices. The battery includes a novel electrolyte which is electrochemically stable and does not react with the lithium anode and a novel vanadium oxide cathode. Configured as a microbattery, the battery can be fabricated directly onto a semiconductor chip, onto the semiconductor die or onto any portion of the chip carrier. The battery can be fabricated to any specified size or shape to meet the requirements of a particular application. The battery is fabricated of solid state materials and is capable of operation between {minus}15 C and 150 C.

  6. Electra-optical device including a nitrogen containing electrolyte

    DOEpatents

    Bates, John B.; Dudney, Nancy J.; Gruzalski, Greg R.; Luck, Christopher F.

    1995-01-01

    Described is a thin-film battery, especially a thin-film microbattery, and a method for making same having application as a backup or primary integrated power source for electronic devices. The battery includes a novel electrolyte which is electrochemically stable and does not react with the lithium anode and a novel vanadium oxide cathode Configured as a microbattery, the battery can be fabricated directly onto a semiconductor chip, onto the semiconductor die or onto any portion of the chip carrier. The battery can be fabricated to any specified size or shape to meet the requirements of a particular application. The battery is fabricated of solid state materials and is capable of operation between -15.degree. C. and 150.degree. C.

  7. Fuel cell repeater unit including frame and separator plate

    SciTech Connect

    Yamanis, Jean; Hawkes, Justin R; Chiapetta, Jr., Louis; Bird, Connie E; Sun, Ellen Y; Croteau, Paul F

    2013-11-05

    An example fuel cell repeater includes a separator plate and a frame establishing at least a portion of a flow path that is operative to communicate fuel to or from at least one fuel cell held by the frame relative to the separator plate. The flow path has a perimeter and any fuel within the perimeter flow across the at least one fuel cell in a first direction. The separator plate, the frame, or both establish at least one conduit positioned outside the flow path perimeter. The conduit is outside of the flow path perimeter and is configured to direct flow in a second, different direction. The conduit is fluidly coupled with the flow path.

  8. Pulse transmission transmitter including a higher order time derivate filter

    DOEpatents

    Dress, Jr., William B.; Smith, Stephen F.

    2003-09-23

    Systems and methods for pulse-transmission low-power communication modes are disclosed. A pulse transmission transmitter includes: a clock; a pseudorandom polynomial generator coupled to the clock, the pseudorandom polynomial generator having a polynomial load input; an exclusive-OR gate coupled to the pseudorandom polynomial generator, the exclusive-OR gate having a serial data input; a programmable delay circuit coupled to both the clock and the exclusive-OR gate; a pulse generator coupled to the programmable delay circuit; and a higher order time derivative filter coupled to the pulse generator. The systems and methods significantly reduce lower-frequency emissions from pulse transmission spread-spectrum communication modes, which reduces potentially harmful interference to existing radio frequency services and users and also simultaneously permit transmission of multiple data bits by utilizing specific pulse shapes.

  9. Development of high frequency and wide bandwidth Johnson noise thermometry

    SciTech Connect

    Crossno, Jesse; Liu, Xiaomeng; Kim, Philip; Ohki, Thomas A.; Fong, Kin Chung

    2015-01-12

    We develop a high frequency, wide bandwidth radiometer operating at room temperature, which augments the traditional technique of Johnson noise thermometry for nanoscale thermal transport studies. Employing low noise amplifiers and an analog multiplier operating at 2 GHz, auto- and cross-correlated Johnson noise measurements are performed in the temperature range of 3 to 300 K, achieving a sensitivity of 5.5 mK (110 ppm) in 1 s of integration time. This setup allows us to measure the thermal conductance of a boron nitride encapsulated monolayer graphene device over a wide temperature range. Our data show a high power law (T ∼ 4) deviation from the Wiedemann-Franz law above T ∼ 100 K.

  10. Implementing wide baseline matching algorithms on a graphics processing unit.

    SciTech Connect

    Rothganger, Fredrick H.; Larson, Kurt W.; Gonzales, Antonio Ignacio; Myers, Daniel S.

    2007-10-01

    Wide baseline matching is the state of the art for object recognition and image registration problems in computer vision. Though effective, the computational expense of these algorithms limits their application to many real-world problems. The performance of wide baseline matching algorithms may be improved by using a graphical processing unit as a fast multithreaded co-processor. In this paper, we present an implementation of the difference of Gaussian feature extractor, based on the CUDA system of GPU programming developed by NVIDIA, and implemented on their hardware. For a 2000x2000 pixel image, the GPU-based method executes nearly thirteen times faster than a comparable CPU-based method, with no significant loss of accuracy.

  11. Wide Bandgap Semiconductors for Clean Energy Workshop: Summary Report

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Wide Bandgap Semiconductors for Clean Energy Workshop: Summary Report July 25, 2012 Rosemont, IL THE DEPARTMENT OF ENERGY (DOE)'S ADVANCED MANUFACTURING OFFICE PROVIDED FUNDING FOR THIS MEETING AND SUMMARY. The DOE Office of Energy Efficiency and Renewable Energy (EERE)'s Advanced Manufacturing Office partners with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality domestic manufacturing jobs

  12. Metlab Plant-Wide Assessment (Metlab in Wyndmoor, PA)

    SciTech Connect

    2002-08-01

    This OIT BestPractices case study describes the methods and results of a plant-wide energy assessment at Metlab's aircraft component manufacturing plant in Wyndmoor, PA. Recommendations derived from the assessment, if implemented, can save an estimated $528,400 annually, reduce natural gas use by 50,070 MMbtu per year, and reduce electrical use by 329,400 kWh per year.

  13. Martinez Refinery Completes Plant-Wide Energy Assessment

    SciTech Connect

    2002-11-01

    This OIT BestPractices Case Study describes how the Equilon Enterprises oil refinery in Martinez, California undertook a plant-wide energy assessment that focused on three key areas: waste minimization, process debottlenecking, and operations optimization. The assessment yielded recommendations, which, if implemented, can save more than 6,000,000 MMBtu per year and an estimated $52,000,000 per year, plus improve process control and reduce waste.

  14. Wide swath imaging spectrometer utilizing a multi-modular design

    DOEpatents

    Chrisp, Michael P.

    2010-10-05

    A wide swath imaging spectrometer utilizing an array of individual spectrometer modules in the telescope focal plane to provide an extended field of view. The spectrometer modules with their individual detectors are arranged so that their slits overlap with motion on the scene providing contiguous spatial coverage. The number of modules can be varied to take full advantage of the field of view available from the telescope.

  15. Economic Impacts of a Wide Area Release of Anthrax

    SciTech Connect

    Judd, Kathleen S.; Olson, Jarrod; Stein, Steven L.; Lesperance, Ann M.

    2009-05-29

    This analysis explores economic impacts that might result from a wide-area release of anthrax. The intent is not to provide a quantitative analysis of such a disaster, but to: 1. Define the general categories of economic impacts that the region should be concerned about; and, 2. Explore what types of private sector businesses or industries, if any, may have the greatest impact on speeding the economic recovery of the region.

  16. Hanfords Site-Wide Permit

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    commonly called the "site-wide permit") Ecology's role at Hanford * Ensure that Hanford cleanup protects the Columbia River by following state laws to protect our air, land and water * Protect, preserve and enhance the state's environment Why is there a permit? * Hanford made plutonium for nuclear weapons * Hanford created literally millions of tons of waste to deal with "later" * Nation enacted most environmental laws in the 1970s * Hanford regulation begins A Hanford

  17. Hybrid Wide Range Detector Amplifier - Energy Innovation Portal

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Industrial Technologies Industrial Technologies Energy Analysis Energy Analysis Find More Like This Return to Search Hybrid Wide Range Detector Amplifier Sandia National Laboratories Contact SNL About This Technology Publications: PDF Document Publication Market Sheet (827 KB) Technology Marketing SummaryMany applications require detection of both very small and very large signals. High gain detector amplifiers provide low noise but are easily swamped by large signals. Logarithmic amplifiers

  18. Science with a wide-field UV transient explorer

    SciTech Connect

    Sagiv, I.; Gal-Yam, A.; Ofek, E. O.; Waxman, E.; Trakhtenbrot, B.; Topaz, J.; Aharonson, O.; Kulkarni, S. R.; Phinney, E. S.; Nakar, E.; Maoz, D.; Beichman, C.; Murthy, J.; Worden, S. P.

    2014-04-01

    The time-variable electromagnetic sky has been well-explored at a wide range of wavelengths. In contrast, the ultra-violet (UV) variable sky is relatively poorly explored, even though it offers exciting scientific prospects. Here, we review the potential scientific impact of a wide-field UV survey on the study of explosive and other transient events, as well as known classes of variable objects, such as active galactic nuclei and variable stars. We quantify our predictions using a fiducial set of observational parameters which are similar to those envisaged for the proposed ULTRASAT mission. We show that such a mission would be able to revolutionize our knowledge about massive star explosions by measuring the early UV emission from hundreds of events, revealing key physical parameters of the exploding progenitor stars. Such a mission would also detect the UV emission from many tens of tidal-disruption events of stars by supermassive black holes at galactic nuclei and enable a measurement of the rate of such events. The overlap of such a wide-field UV mission with existing and planned gravitational-wave and high-energy neutrino telescopes makes it especially timely.

  19. Incoherent pion photoproduction on the deuteron including polarization effects

    SciTech Connect

    Darwish, E.M.; Al-Thoyaib, S.S.

    2011-03-15

    Incoherent pion photoproduction on the deuteron including polarization effects is studied in the energy region from {pi}-threshold up to the {Delta}(1232)-resonance with inclusion of all leading {pi}NN effects. For the elementary pion photoproduction operator, a realistic effective Lagrangian approach is used which displays chiral symmetry, gauge invariance, and crossing symmetry, as well as a consistent treatment of the spin-3/2 interaction. The interactions in the final two-body subsystems are taken in separable form. Effects of final state interaction are investigated and their role in unpolarized and polarization observables are found to be significant. The extracted cross sections and spin asymmetries are compared with available experimental data and predictions of other works, and a satisfactory agreement is obtained. In addition, the sensitivity of results to the elementary N({gamma}, {pi})N operator is investigated. Considerable dependence of the d({gamma}, {pi})NN results on the elementary amplitude is found. This indicates that it can serve as a filter for different elementary operators.

  20. cDNA encoding a polypeptide including a hevein sequence

    DOEpatents

    Raikhel, N.V.; Broekaert, W.F.; Chua, N.H.; Kush, A.

    1995-03-21

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1,018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74--79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli. 11 figures.

  1. C -parameter distribution at N 3 LL ' including power corrections

    DOE PAGES [OSTI]

    Hoang, André H.; Kolodrubetz, Daniel W.; Mateu, Vicent; Stewart, Iain W.

    2015-05-15

    We compute the e⁺e⁻ C-parameter distribution using the soft-collinear effective theory with a resummation to next-to-next-to-next-to-leading-log prime accuracy of the most singular partonic terms. This includes the known fixed-order QCD results up to O(α3s), a numerical determination of the two-loop nonlogarithmic term of the soft function, and all logarithmic terms in the jet and soft functions up to three loops. Our result holds for C in the peak, tail, and far tail regions. Additionally, we treat hadronization effects using a field theoretic nonperturbative soft function, with moments Ωn. To eliminate an O(ΛQCD) renormalon ambiguity in the soft function, we switchmore » from the MS¯ to a short distance “Rgap” scheme to define the leading power correction parameter Ω1. We show how to simultaneously account for running effects in Ω1 due to renormalon subtractions and hadron-mass effects, enabling power correction universality between C-parameter and thrust to be tested in our setup. We discuss in detail the impact of resummation and renormalon subtractions on the convergence. In the relevant fit region for αs(mZ) and Ω1, the perturbative uncertainty in our cross section is ≅ 2.5% at Q=mZ.« less

  2. Extractant composition including crown ether and calixarene extractants

    DOEpatents

    Meikrantz, David H.; Todd, Terry A.; Riddle, Catherine L.; Law, Jack D.; Peterman, Dean R.; Mincher, Bruce J.; McGrath, Christopher A.; Baker, John D.

    2009-04-28

    An extractant composition comprising a mixed extractant solvent consisting of calix[4] arene-bis-(tert-octylbenzo)-crown-6 ("BOBCalixC6"), 4',4',(5')-di-(t-butyldicyclo-hexano)-18-crown-6 ("DtBu18C6"), and at least one modifier dissolved in a diluent. The DtBu18C6 may be present at from approximately 0.01M to approximately 0.4M, such as at from approximately 0.086 M to approximately 0.108 M. The modifier may be 1-(2,2,3,3-tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol ("Cs-7SB") and may be present at from approximately 0.01M to approximately 0.8M. In one embodiment, the mixed extractant solvent includes approximately 0.15M DtBu18C6, approximately 0.007M BOBCalixC6, and approximately 0.75M Cs-7SB modifier dissolved in an isoparaffinic hydrocarbon diluent. The extractant composition further comprises an aqueous phase. The mixed extractant solvent may be used to remove cesium and strontium from the aqueous phase.

  3. Interim performance criteria for photovoltaic energy systems. [Glossary included

    SciTech Connect

    DeBlasio, R.; Forman, S.; Hogan, S.; Nuss, G.; Post, H.; Ross, R.; Schafft, H.

    1980-12-01

    This document is a response to the Photovoltaic Research, Development, and Demonstration Act of 1978 (P.L. 95-590) which required the generation of performance criteria for photovoltaic energy systems. Since the document is evolutionary and will be updated, the term interim is used. More than 50 experts in the photovoltaic field have contributed in the writing and review of the 179 performance criteria listed in this document. The performance criteria address characteristics of present-day photovoltaic systems that are of interest to manufacturers, government agencies, purchasers, and all others interested in various aspects of photovoltaic system performance and safety. The performance criteria apply to the system as a whole and to its possible subsystems: array, power conditioning, monitor and control, storage, cabling, and power distribution. They are further categorized according to the following performance attributes: electrical, thermal, mechanical/structural, safety, durability/reliability, installation/operation/maintenance, and building/site. Each criterion contains a statement of expected performance (nonprescriptive), a method of evaluation, and a commentary with further information or justification. Over 50 references for background information are also given. A glossary with definitions relevant to photovoltaic systems and a section on test methods are presented in the appendices. Twenty test methods are included to measure performance characteristics of the subsystem elements. These test methods and other parts of the document will be expanded or revised as future experience and needs dictate.

  4. cDNA encoding a polypeptide including a hevein sequence

    DOEpatents

    Raikhel, N.V.; Broekaert, W.F.; Chua, N.H.; Kush, A.

    1999-05-04

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74--79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli. 12 figs.

  5. cDNA encoding a polypeptide including a hevein sequence

    DOEpatents

    Raikhel, Natasha V.; Broekaert, Willem F.; Chua, Nam-Hai; Kush, Anil

    1999-05-04

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74-79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli.

  6. CDNA encoding a polypeptide including a hevein sequence

    DOEpatents

    Raikhel, Natasha V.; Broekaert, Willem F.; Chua, Nam-Hai; Kush, Anil

    1995-03-21

    A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74-79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli.

  7. Community Assessment Tool for Public Health Emergencies Including Pandemic Influenza

    SciTech Connect

    HCTT-CHE

    2011-04-14

    The Community Assessment Tool (CAT) for Public Health Emergencies Including Pandemic Influenza (hereafter referred to as the CAT) was developed as a result of feedback received from several communities. These communities participated in workshops focused on influenza pandemic planning and response. The 2008 through 2011 workshops were sponsored by the Centers for Disease Control and Prevention (CDC). Feedback during those workshops indicated the need for a tool that a community can use to assess its readiness for a disaster—readiness from a total healthcare perspective, not just hospitals, but the whole healthcare system. The CAT intends to do just that—help strengthen existing preparedness plans by allowing the healthcare system and other agencies to work together during an influenza pandemic. It helps reveal each core agency partners' (sectors) capabilities and resources, and highlights cases of the same vendors being used for resource supplies (e.g., personal protective equipment [PPE] and oxygen) by the partners (e.g., public health departments, clinics, or hospitals). The CAT also addresses gaps in the community's capabilities or potential shortages in resources. While the purpose of the CAT is to further prepare the community for an influenza pandemic, its framework is an extension of the traditional all-hazards approach to planning and preparedness. As such, the information gathered by the tool is useful in preparation for most widespread public health emergencies. This tool is primarily intended for use by those involved in healthcare emergency preparedness (e.g., community planners, community disaster preparedness coordinators, 9-1-1 directors, hospital emergency preparedness coordinators). It is divided into sections based on the core agency partners, which may be involved in the community's influenza pandemic influenza response.

  8. Comparative chloroplast genomics: Analyses including new sequencesfrom the angiosperms Nuphar advena and Ranunculus macranthus

    SciTech Connect

    Raubeso, Linda A.; Peery, Rhiannon; Chumley, Timothy W.; Dziubek,Chris; Fourcade, H. Matthew; Boore, Jeffrey L.; Jansen, Robert K.

    2007-03-01

    The number of completely sequenced plastid genomes available is growing rapidly. This new array of sequences presents new opportunities to perform comparative analyses. In comparative studies, it is most useful to compare across wide phylogenetic spans and, within angiosperms, to include representatives from basally diverging lineages such as the new genomes reported here: Nuphar advena (from a basal-most lineage) and Ranunculus macranthus (from the basal group of eudicots). We report these two new plastid genome sequences and make comparisons (within angiosperms, seed plants, or all photosynthetic lineages) to evaluate features such as the status of ycf15 and ycf68 as protein coding genes, the distribution of simple sequence repeats (SSRs) and longer dispersed repeats (SDR), and patterns of nucleotide composition.

  9. Development of Autonomous Magnetometer Rotorcraft For Wide Area Assessment

    SciTech Connect

    Mark D. McKay; Matthew O. Anderson

    2011-08-01

    Large areas across the United States and internationally are potentially contaminated with unexploded ordinance (UXO), with some ranges encompassing tens to hundreds of thousands of acres. Technologies are needed which will allow for cost effective wide area scanning with (1) near 100% coverage and (2) near 100% detection of subsurface ordnance or features indicative of subsurface ordnance. The current approach to wide area assessment is a multi-level one, in which medium - altitude fixed wing optical imaging is used for an initial site assessment. This assessment is followed with low altitude manned helicopter based magnetometry. Subsequent to this wide area assessment targeted surface investigations are performed using either towed geophysical sensor arrays or man portable sensors. In order to be an effective tool for small UXO detection, the sensing altitude for magnetic site investigations needs to be on the order of 1 to 3 meters. These altitude requirements mean that manned helicopter surveys will generally only be feasible in large, open and relatively flat terrains. While such surveys are effective in mapping large areas relatively fast there are substantial mobilization/demobilization, staffing and equipment costs associated with these surveys, resulting in costs of approximately $100-$150/acre. In addition, due to the low altitude there are substantial risks to pilots and equipment. Surface towed arrays provide highresolution maps but have other limitations, e.g. in their ability to navigate rough terrain effectively. Thus there is a need for other systems, which can be used for effective data collection. An Unmanned Aerial Vehicle (UAV) magnetometer platform is an obvious alternative. The motivation behind such a system is that it reduces risk to operators, is lower in initial and Operational and Maintenance (O&M) costs (and can thus potentially be applied to smaller sites) and has the potential of being more effective in terms of detection and possibly

  10. Amplifier circuit operable over a wide temperature range

    DOEpatents

    Kelly, Ronald D.; Cannon, William L.

    1979-01-01

    An amplifier circuit having stable performance characteristics over a wide temperature range from approximately 0.degree. C up to as high as approximately 500.degree. C, such as might be encountered in a geothermal borehole. The amplifier utilizes ceramic vacuum tubes connected in directly coupled differential amplifier pairs having a common power supply and a cathode follower output stage. In an alternate embodiment, for operation up to 500.degree. C, positive and negative power supplies are utilized to provide improved gain characteristics, and all electrical connections are made by welding. Resistor elements in this version of the invention are specially heat treated to improve their stability with temperature.

  11. Wide band cryogenic ultra-high vacuum microwave absorber

    DOEpatents

    Campisi, I.E.

    1992-05-12

    An absorber waveguide assembly for absorbing higher order modes of microwave energy under cryogenic ultra-high vacuum conditions, that absorbs wide-band multi-mode energy. The absorber is of a special triangular shape, made from flat tiles of silicon carbide and aluminum nitride. The leading sharp end of the absorber is located in a corner of the waveguide and tapers to a larger cross-sectional area whose center is located approximately in the center of the wave guide. The absorber is relatively short, being of less height than the maximum width of the waveguide. 11 figs.

  12. A Wide Range Neutron Detector for Space Nuclear Reactor Applications

    SciTech Connect

    Nassif, Eduardo; Sismonda, Miguel; Matatagui, Emilio; Pretorius, Stephan

    2007-01-30

    We propose here a versatile and innovative solution for monitoring and controlling a space-based nuclear reactor that is based on technology already proved in ground based reactors. A Wide Range Neutron Detector (WRND) allows for a reduction in the complexity of space based nuclear instrumentation and control systems. A ground model, predecessor of the proposed system, has been installed and is operating at the OPAL (Open Pool Advanced Light Water Research Reactor) in Australia, providing long term functional data. A space compatible Engineering Qualification Model of the WRND has been developed, manufactured and verified satisfactorily by analysis, and is currently under environmental testing.

  13. Wide band cryogenic ultra-high vacuum microwave absorber

    DOEpatents

    Campisi, Isidoro E. (Newport News, VA)

    1992-01-01

    An absorber wave guide assembly for absorbing higher order modes of microwave energy under cryogenic ultra-high vacuum conditions, that absorbs wide-band multi-mode energy. The absorber is of a special triangular shape, made from flat tiles of silicon carbide and aluminum nitride. The leading sharp end of the absorber is located in a corner of the wave guide and tapers to a larger cross-sectional area whose center is located approximately in the center of the wave guide. The absorber is relatively short, being of less height than the maximum width of the wave guide.

  14. Hanford Site-Wide Probabilistic Seismic Hazard Analysis

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Example Application of Approach 3 to Develop Soil Hazard Curves Hanford Site-Wide Probabilistic Seismic Hazard Analysis 2014 Appendix K - Example Application of Approach 3 to Develop Soil Hazard Curves The seismic hazard results presented in Chapter 10.0 represent the hazard at the baserock horizon defined to be at the top of the Wanapum basalts, which is encountered at depths of between 332 and 446 m at the hazard calculation Sites A-E. As discussed in Section 10.5, the recommended approach

  15. Hanford Site-Wide Probabilistic Seismic Hazard Analysis

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    (Revision 1) Example Application of Approach 3 to Develop Soil Hazard Curves Hanford Site-Wide Probabilistic Seismic Hazard Analysis 2014 K.1 Appendix K - Example Application of Approach 3 to Develop Soil Hazard Curves The seismic hazard results presented in Chapter 10.0 represent the hazard at the baserock horizon defined to be at the top of the Wanapum basalts, which is encountered at depths of between 332 and 446 m at the hazard calculation Sites A-E. As discussed in Section 10.5, the

  16. Geological problems in radioactive waste isolation - A world wide review

    SciTech Connect

    Witherspoon, P.A.

    1991-06-01

    The problem of isolating radioactive wastes from the biosphere presents specialists in the earth sciences with some of the most complicated problems they have ever encountered. This is especially true for high-level waste (HLW), which must be isolated in the underground and away from the biosphere for thousands of years. The most widely accepted method of doing this is to seal the radioactive materials in metal canisters that are enclosed by a protective sheath and placed underground in a repository that has been carefully constructed in an appropriate rock formation. Much new technology is being developed to solve the problems that have been raised, and there is a continuing need to publish the results of new developments for the benefit of all concerned. Table 1 presents a summary of the various formations under investigation according to the reports submitted for this world wide review. It can be seen that in those countries that are searching for repository sites, granitic and metamorphic rocks are the prevalent rock type under investigation. Six countries have developed underground research facilities that are currently in use. All of these investigations are in saturated systems below the water table, except the United States project, which is in the unsaturated zone of a fractured tuff.

  17. High force vibration testing with wide frequency range

    DOEpatents

    Romero, Edward F.; Jepsen, Richard A.; Gregory, Danny Lynn

    2013-04-02

    A shaker assembly for vibration testing includes first and second shakers, where the first shaker includes a piezo-electric material for generating vibration. A support structure permits a test object to be supported for vibration of the test object by both shakers. An input permits an external vibration controller to control vibration of the shakers.

  18. Method and apparatus for use of III-nitride wide bandgap semiconductors in optical communications

    DOEpatents

    Hui, Rongqing; Jiang,Hong-Xing; Lin, Jing-Yu

    2008-03-18

    The present disclosure relates to the use of III-nitride wide bandgap semiconductor materials for optical communications. In one embodiment, an optical device includes an optical waveguide device fabricated using a III-nitride semiconductor material. The III-nitride semiconductor material provides for an electrically controllable refractive index. The optical waveguide device provides for high speed optical communications in an infrared wavelength region. In one embodiment, an optical amplifier is provided using optical coatings at the facet ends of a waveguide formed of erbium-doped III-nitride semiconductor materials.

  19. HAB Advice and Issue Tracking Process for Draft RCRA Site-Wide Permit Comment Period

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    and Issue Tracking Process for Draft RCRA Site-Wide Permit Comment Period Last updated 5/8/12 Introduction: The following document is a living document intended to be updated regularly to include new information and track issues related to the Draft Hanford Dangerous Waste Permit, also referred to as the RCRA Permit. Advice Process: 1. Assemble Issue Manager Team: Liz Mattson, Pam Larsen, Gerry Pollet, Jean Vanni, Steve Hudson 2. Prepare for years for the release of the Permit, work with Ecology

  20. The Wide-area Energy Management System Phase 2 Final Report

    SciTech Connect

    Lu, Ning; Makarov, Yuri V.; Weimar, Mark R.

    2010-08-31

    The higher penetration of intermittent generation resources (including wind and solar generation) in the Bonneville Power Administration (BPA) and California Independent System Operator (CAISO) balancing authorities (BAs) raises issue of requiring expensive additional fast grid balancing services in response to additional intermittency and fast up and down power ramps in the electric supply system. The overall goal of the wide-area energy management system (WAEMS) project is to develop the principles, algorithms, market integration rules, a functional design, and a technical specification for an energy storage system to help cope with unexpected rapid changes in renewable generation power output. The resulting system will store excess energy, control dispatchable load and distributed generation, and utilize inter-area exchange of the excess energy between the California ISO and Bonneville Power Administration control areas. A further goal is to provide a cost-benefit analysis and develop a business model for an investment-based practical deployment of such a system. There are two tasks in Phase 2 of the WAEMS project: the flywheel field tests and the battery evaluation. Two final reports, the Wide-area Energy Management System Phase 2 Flywheel Field Tests Final Report and the Wide-area Energy Storage and Management System Battery Storage Evaluation, were written to summarize the results of the two tasks.

  1. Imaging beneath an opaque basaltic layer using densely sampled wide-angle OBS data

    SciTech Connect

    Samson, C.; Barton, P.J.; Karwatowski, J.

    1995-05-01

    A combined reflection/refraction (wide-angle) seismic survey was conducted on the continental shelf north-west of Britain, using a conventional streamer with an air gun source, and static ocean-bottom seismometers (OBS) to record wide-angle energy. The shallow structure down to a basaltic layer was reasonably well imaged on the stacked reflection section. The basalts, however, proved to be opaque to the conventional reflection method and prevented the imaging of deeper horizons, where an important velocity inversion was anticipated. This paper reports on the processing, modeling and interpretation of the densely sampled wide-angle OBS data that were coincident with the reflection profile. Eleven OBS instruments were deployed along a 75 km line and recorded signal from a powerful 149 liter (9100 in.{sup 3}) air gun array fired every 50 m. Data processing was performed using a standard industrial reflection seismic software package prior to first-arrival picking. Processing steps included geometry definition, trace summation and display of the data using various scaling algorithms. An initial model was constructed from 1D velocity-time profiles digitized every 4 km along the stacked section. First arrival travel time modeling rapidly converged to a detailed model of the structure of the top 5 km of the crust. Modeling revealed the existence of a buried low-velocity Mesozoic sedimentary basin, of a prominent basement horst and of a normal fault penetrating to the basement.

  2. Wide-Bandwidth Capture of Wire-Scanner Signals

    SciTech Connect

    Gruchalla, Michael E.; Gilpatrick, John D.; Sedillo, James Daniel; Martinez, Derwin

    2012-05-16

    Integrated charge collected on the sense wires of wire-scanner systems utilized to determine beam profile is generally the parameter of interest. The LANSCE application requires capturing the charge information macropulse-by-macropulse with macropulse lengths as long as 700 {micro}s at a maximum macropulse rate of 120 Hz. Also, for the LANSCE application, it is required that the integration be performed in a manner that does not require integrator reset between macropulses. Due to the long macropulse which must be accommodated and the 8.33 ms minimum pulse period, a simple R-C integrator cannot be utilized since there is insufficient time between macropulses to allow the integrator to adequately recover. The application of wide analog bandwidth to provide accurate pulse-by-pulse capture of the wire signals with digital integration of the wire signals to determine captured charge at each macropulse in applications with comparatively long macropulses and high pulse repetition rates is presented.

  3. Wide-range radioactive-gas-concentration detector

    DOEpatents

    Anderson, D.F.

    1981-11-16

    A wide-range radioactive-gas-concentration detector and monitor capable of measuring radioactive-gas concentrations over a range of eight orders of magnitude is described. The device is designed to have an ionization chamber sufficiently small to give a fast response time for measuring radioactive gases but sufficiently large to provide accurate readings at low concentration levels. Closely spaced parallel-plate grids provide a uniform electric field in the active region to improve the accuracy of measurements and reduce ion migration time so as to virtually eliminate errors due to ion recombination. The parallel-plate grids are fabricated with a minimal surface area to reduce the effects of contamination resulting from absorption of contaminating materials on the surface of the grids. Additionally, the ionization-chamber wall is spaced a sufficient distance from the active region of the ionization chamber to minimize contamination effects.

  4. Property:Audience | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    for this property are: Private Companies City and County Officials Municipal and Sustainability Planners Political Leaders Economic Development Officials Indian Tribes Community...

  5. Engaging Your Audience | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Department of Energy EnergySavers.gov: A New Season, a New URL for the Consumer's Guide EnergySavers.gov: A New Season, a New URL for the Consumer's Guide April 3, 2009 - 5:47pm Addthis Allison Casey Senior Communicator, NREL If you're a regular visitor to EERE's Consumer's Guide to Energy Efficiency and Renewable Energy, you may have noticed some changes this week. The site has moved to EnergySavers.gov and is now called "Energy Savers." The same in-depth information is still

  6. Portsmouth RI/FS Report for the Site-Wide Waste Disposition Evaluation...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Site-Wide Waste Disposition Evaluation Project Portsmouth RIFS Report for the Site-Wide ... RIFS Report for the Site-Wide Waste Disposition Evaluation Project for Portsmouth incl. ...

  7. OSTIblog Articles in the world wide web Topic | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    world wide web Topic The Knowledge Investment Curve by Dr. Walt Warnick 19 Aug, 2009 in ... to colleague... Related Topics: knowledge, Web, world wide web, WorldWideScience.org (WWS)

  8. System-wide power management control via clock distribution network

    SciTech Connect

    Coteus, Paul W.; Gara, Alan; Gooding, Thomas M.; Haring, Rudolf A.; Kopcsay, Gerard V.; Liebsch, Thomas A.; Reed, Don D.

    2015-05-19

    An apparatus, method and computer program product for automatically controlling power dissipation of a parallel computing system that includes a plurality of processors. A computing device issues a command to the parallel computing system. A clock pulse-width modulator encodes the command in a system clock signal to be distributed to the plurality of processors. The plurality of processors in the parallel computing system receive the system clock signal including the encoded command, and adjusts power dissipation according to the encoded command.

  9. Off-Cycle Benchmarking of PHEVs; Wide Range of Temperatures...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Off-Cycle Benchmarking of PHEVs; Wide Range of Temperatures and Aggressive Driving Cycles Off-Cycle Benchmarking of PHEVs; Wide Range of Temperatures and Aggressive Driving ...

  10. The DESI Wide Field Corrector Optics (Conference) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Conference: The DESI Wide Field Corrector Optics Citation Details In-Document Search Title: The DESI Wide Field Corrector Optics The Dark Energy Spectroscopic instrument (DESI) is ...

  11. EIS-0380: EPA Notice of Availability of the Final Site-Wide Environmen...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EPA Notice of Availability of the Final Site-Wide Environmental Impact Statement EIS-0380: EPA Notice of Availability of the Final Site-Wide Environmental Impact Statement...

  12. Remote monitoring using technologies from the Internet and World Wide Web

    SciTech Connect

    Puckett, J.M.; Burczyk, L.

    1997-11-01

    Recent developments in Internet technologies are changing and enhancing how one processes and exchanges information. These developments include software and hardware in support of multimedia applications on the World Wide Web. In this paper the authors describe these technologies as they have applied them to remote monitoring and show how they will allow the International Atomic Energy Agency to efficiently review and analyze remote monitoring data for verification of material movements. The authors have developed demonstration software that illustrates several safeguards data systems using the resources of the Internet and Web to access and review data. This Web demo allows the user to directly observe sensor data, to analyze simulated safeguards data, and to view simulated on-line inventory data. Future activities include addressing the technical and security issues associated with using the Web to interface with existing and planned monitoring systems at nuclear facilities. Some of these issues are authentication, encryption, transmission of large quantities of data, and data compression.

  13. The International Energy Agency`s role in world-wide wind energy development

    SciTech Connect

    Rangi, R.; Ancona, D.

    1997-12-31

    Wind energy is now being deployed world-wide at a rapidly increasing rate and the International Energy Agency (IEA) has a changing role in its growth. IEA was founded in 1974 within the framework of the Organization for Economic Cooperation and Development (OECD) to collaborate on comprehensive international energy programs. IEA membership consists of eighteen parties from sixteen countries and the European Commission. Recently there has been increasing interest in IEA participation from both OECD and non-OECD countries. Non-OECD countries participating in various IEA Agreements include: China, India, Israel, Korea, and Russia. Because of its diverse international makeup, the IEA is viewed as a source of reliable technical and economic information. The World Bank has approached the Executive Committee for Wind Energy R & D, through the IEA Renewable Energy Working Party, to assist in the expansion of wind deployment. In addition, IEA is moving from R & D programs to include tracking of implementation incentives offered by its members.

  14. DOE PLANT-WIDE ENERGY ASSESSMENT RESULTS RELATED TO THE U. S. AUTOMOTIVE INDUSTRY

    SciTech Connect

    Kelly Kissock, Arvind Thekdi, Len Bishop

    2006-01-05

    Forty-nine plant-wide energy efficiency assessments have been undertaken under sponsorship of the U.S. Department of Industrial Technologies Program. Plant-wide assessments are comprehensive, systematic investigations of plant energy efficiency, including plant utility systems and process operations. Assessments in industrial facilities have highlighted opportunities for implementing best practices in industrial energy management, including the adoption of new, energy-efficient technologies and process and equipment improvements. Total annual savings opportunities of $201 million have been identified from the 40 completed assessments. Many of the participating industrial plants have implemented efficiency-improvement projects and already have realized total cost savings of more than $81 million annually. This paper provides an overview of the assessment efforts undertaken and presents a summary of the major energy and cost savings identified to date. The paper also discusses specific results from assessments conducted at four plants in the automotive manufacturing operations and supporting industries. These particular assessments were conducted at facilities that produce engine castings, plastic films used for glass laminates, forged components, and at a body spray painting plant.

  15. Browsing the World Wide Web from behind a firewall

    SciTech Connect

    Simons, R.W.

    1995-02-01

    The World Wide Web provides a unified method of access to various information services on the Internet via a variety of protocols. Mosaic and other browsers give users a graphical interface to the Web that is easier to use and more visually pleasing than any other common Internet information service today. The availability of information via the Web and the number of users accessing it have both grown rapidly in the last year. The interest and investment of commercial firms in this technology suggest that in the near future, access to the Web may become as necessary to doing business as a telephone. This is problematical for organizations that use firewalls to protect their internal networks from the Internet. Allowing all the protocols and types of information found in the Web to pass their firewall will certainly increase the risk of attack by hackers on the Internet. But not allowing access to the Web could be even more dangerous, as frustrated users of the internal network are either unable to do their jobs, or find creative new ways to get around the firewall. The solution to this dilemma adopted at Sandia National Laboratories is described. Discussion also covers risks of accessing the Web, design alternatives considered, and trade-offs used to find the proper balance between access and protection.

  16. Energy efficiency study of single-wide manufactured homes

    SciTech Connect

    Yarbrough, D.W.; Andrews, G.J.; Stovall, T.K.; Kelly, T.

    1999-12-01

    This Cooperative Research and Development Agreement (CRADA) was among Tennessee Technological University, Clayton Homes, Inc., and Oak Ridge National Laboratory (ORNL). Manufactured homes now make up a substantial portion of the new home market, and improving the energy efficiency of these homes would save significant amounts of energy. This project explored the impact of differing levels of attic insulation, the use of evacuated insulation panels, and the application of a solar reflective roof coating. The performance of the installed roof cavity insulation compared favorably with that predicted by laboratory measurements. The more heavily insulated of the two units used about 30% less energy over the period of the project than the standard unit. Based on the experimental data, computer simulations for nine cities were completed for a single-wide manufactured home with the solar reflective roof coating. Annual electric power savings ranged from 894 kWh in Rapid City to 2119 kWh for the same roof area in Los Angeles. The field performance of vacuum insulation panels was compared with laboratory performance. The panels will perform as expected if protected from puncture.

  17. Monitoring system including an electronic sensor platform and an interrogation transceiver

    SciTech Connect

    Kinzel, Robert L.; Sheets, Larry R.

    2003-09-23

    A wireless monitoring system suitable for a wide range of remote data collection applications. The system includes at least one Electronic Sensor Platform (ESP), an Interrogator Transceiver (IT) and a general purpose host computer. The ESP functions as a remote data collector from a number of digital and analog sensors located therein. The host computer provides for data logging, testing, demonstration, installation checkout, and troubleshooting of the system. The IT transmits signals from one or more ESP's to the host computer to the ESP's. The IT host computer may be powered by a common power supply, and each ESP is individually powered by a battery. This monitoring system has an extremely low power consumption which allows remote operation of the ESP for long periods; provides authenticated message traffic over a wireless network; utilizes state-of-health and tamper sensors to ensure that the ESP is secure and undamaged; has robust housing of the ESP suitable for use in radiation environments; and is low in cost. With one base station (host computer and interrogator transceiver), multiple ESP's may be controlled at a single monitoring site.

  18. Hanford Site-Wide Probabilistic Seismic Hazard Analysis

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    J Digital Seismic Hazard Products J.1 Appendix J Digital Seismic Hazard Products This appendix contains the digital data associated with the seismic hazard results presented in Chapter 10 for use in subsequent development of soil hazard curves for various facilities. These results include mean and fractile baserock hazard curves, mean and fractile baserock uniform hazard response spectra (UHRS), magnitude and distance deaggregation of the mean rock hazard, and deaggregation earthquake (DE)

  19. EA-1914: Final Site-Wide Environmental Assessment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Final Site-Wide Environmental Assessment EA-1914: Final Site-Wide Environmental Assessment National Renewable Energy Laboratory (NREL) National Wind Technology Center (NWTC) Site-Wide Environmental Assessment, Golden, Colorado This Site-Wide EA evaluates the environmental impacts of reasonably foreseeable activities at NWTC. The Site-Wide EA addresses any changes in the regional environment that may have occurred since the previous EA and evaluates new site development proposals and operations.

  20. Hanford Site Wide Transportation Safety Document [SEC 1 Thru 3

    SciTech Connect

    MCCALL, D L

    2002-06-01

    This safety evaluation report (SER) documents the basis for the US Department of Energy (DOE), Richland Operations Office (RL) to approve the Hanford Sitewide Transportation Safety Document (TSD) for onsite Transportation and Packaging (T&P) at Hanford. Hanford contractors, on behalf of DOE-RL, prepared and submitted the Hanford Sitewide Transportation Safety Document, DOE/RL-2001-0036, Revision 0, (DOE/RL 2001), dated October 4, 2001, which is referred to throughout this report as the TSD. In the context of the TSD, Hanford onsite shipments are the activities of moving hazardous materials, substances, and wastes between DOE facilities and over roadways where public access is controlled or restricted and includes intra-area and inter-area movements. The TSD sets forth requirements and standards for onsite shipment of radioactive and hazardous materials and wastes within the confines of the Hanford Site on roadways where public access is restricted by signs, barricades, fences, or other means including road closures and moving convoys controlled by Hanford Site security forces.

  1. System and method of modulating electrical signals using photoconductive wide bandgap semiconductors as variable resistors

    DOEpatents

    Harris, John Richardson; Caporaso, George J; Sampayan, Stephen E

    2013-10-22

    A system and method for producing modulated electrical signals. The system uses a variable resistor having a photoconductive wide bandgap semiconductor material construction whose conduction response to changes in amplitude of incident radiation is substantially linear throughout a non-saturation region to enable operation in non-avalanche mode. The system also includes a modulated radiation source, such as a modulated laser, for producing amplitude-modulated radiation with which to direct upon the variable resistor and modulate its conduction response. A voltage source and an output port, are both operably connected to the variable resistor so that an electrical signal may be produced at the output port by way of the variable resistor, either generated by activation of the variable resistor or propagating through the variable resistor. In this manner, the electrical signal is modulated by the variable resistor so as to have a waveform substantially similar to the amplitude-modulated radiation.

  2. Plant-Wide Energy Efficiency Assessment at the Arizona Portland Cement Plant in Rillito, Arizona

    SciTech Connect

    Stephen J. Coppinger, P.E.; Bruce Colburn, Ph.D., P.E., CEM

    2007-05-17

    A Department of Energy Plant-wide Assessment was undertaken by Arizona Portland Cement (APC) beginning in May 2005. The assessment was performed at APC’s cement production facility in Rillito, Arizona. The assessment included a compressed air evaluation along with a detailed process audit of plant operations and equipment. The purpose of this Energy Survey was to identify a series of energy cost savings opportunities at the Plant, and provide preliminary cost and savings estimates for the work. The assessment was successful in identifying projects that could provide annual savings of over $2.7 million at an estimated capital cost of $4.3 million. If implemented, these projects could amount to a savings of over 4.9 million kWh/yr and 384,420 MMBtu/year.

  3. 230Th/U ages Supporting Hanford Site-Wide Probabilistic Seismic Hazard Analysis

    SciTech Connect

    Paces, James B.

    2014-08-31

    This product represents a USGS Administrative Report that discusses samples and methods used to conduct uranium-series isotope analyses and resulting ages and initial 234U/238U activity ratios of pedogenic cements developed in several different surfaces in the Hanford area middle to late Pleistocene. Samples were collected and dated to provide calibration of soil development in surface deposits that are being used in the Hanford Site-Wide probabilistic seismic hazard analysis conducted by AMEC. The report includes description of sample locations and physical characteristics, sample preparation, chemical processing and mass spectrometry, analytical results, and calculated ages for individual sites. Ages of innermost rinds on a number of samples from five sites in eastern Washington are consistent with a range of minimum depositional ages from 17 ka for cataclysmic flood deposits to greater than 500 ka for alluvium at several sites.

  4. Cellular telephone-based wide-area radiation detection network

    DOEpatents

    Craig, William W.; Labov, Simon E.

    2009-06-09

    A network of radiation detection instruments, each having a small solid state radiation sensor module integrated into a cellular phone for providing radiation detection data and analysis directly to a user. The sensor module includes a solid-state crystal bonded to an ASIC readout providing a low cost, low power, light weight compact instrument to detect and measure radiation energies in the local ambient radiation field. In particular, the photon energy, time of event, and location of the detection instrument at the time of detection is recorded for real time transmission to a central data collection/analysis system. The collected data from the entire network of radiation detection instruments are combined by intelligent correlation/analysis algorithms which map the background radiation and detect, identify and track radiation anomalies in the region.

  5. Wide-area, real-time monitoring and visualization system

    DOEpatents

    Budhraja, Vikram S.; Dyer, James D.; Martinez Morales, Carlos A.

    2011-11-15

    A real-time performance monitoring system for monitoring an electric power grid. The electric power grid has a plurality of grid portions, each grid portion corresponding to one of a plurality of control areas. The real-time performance monitoring system includes a monitor computer for monitoring at least one of reliability metrics, generation metrics, transmission metrics, suppliers metrics, grid infrastructure security metrics, and markets metrics for the electric power grid. The data for metrics being monitored by the monitor computer are stored in a data base, and a visualization of the metrics is displayed on at least one display computer having a monitor. The at least one display computer in one said control area enables an operator to monitor the grid portion corresponding to a different said control area.

  6. Wide-area, real-time monitoring and visualization system

    DOEpatents

    Budhraja, Vikram S.; Dyer, James D.; Martinez Morales, Carlos A.

    2013-03-19

    A real-time performance monitoring system for monitoring an electric power grid. The electric power grid has a plurality of grid portions, each grid portion corresponding to one of a plurality of control areas. The real-time performance monitoring system includes a monitor computer for monitoring at least one of reliability metrics, generation metrics, transmission metrics, suppliers metrics, grid infrastructure security metrics, and markets metrics for the electric power grid. The data for metrics being monitored by the monitor computer are stored in a data base, and a visualization of the metrics is displayed on at least one display computer having a monitor. The at least one display computer in one said control area enables an operator to monitor the grid portion corresponding to a different said control area.

  7. Wide-angle point-to-point x-ray imaging with almost arbitrarily...

    Office of Scientific and Technical Information (OSTI)

    Wide-angle point-to-point x-ray imaging with almost arbitrarily large angles of incidence Citation Details In-Document Search Title: Wide-angle point-to-point x-ray imaging with ...

  8. EIS-0466: Site-wide Environmental Impact Statement for the Continued...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    National LaboratoriesNew Mexico EIS-0466: Site-wide Environmental Impact Statement for the Continued Operation of Sandia National LaboratoriesNew Mexico Summary This Site-Wide ...

  9. High-Efficiency, Wide-Band Three-Phase Rectifiers and Adaptive...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Efficiency, Wide-Band Three-Phase Rectifiers and Adaptive Rectifier Management High-Efficiency, Wide-Band Three-Phase Rectifiers and Adaptive Rectifier Management Higher-Efficiency...

  10. EA-1440-S1: Final Supplement to the Site-Wide Environmental Assessment...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EA-1440-S1: Final Supplement to the Site-Wide Environmental Assessment EA-1440-S1: Final Supplement to the Site-Wide Environmental Assessment National Renewable Energy Laboratory's...

  11. EIS-0238: Notice of Intent to Prepare a Site-Wide Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    8: Notice of Intent to Prepare a Site-Wide Environmental Impact Statement EIS-0238: Notice of Intent to Prepare a Site-Wide Environmental Impact Statement Los Alamos National...

  12. EIS-0387: Y-12 National Security Complex Site-Wide Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EIS-0387: Y-12 National Security Complex Site-Wide Environmental Impact Statement, Oak ... Documents Available for Download May 2, 2016 EIS-0387-SA-01: Supplement Analysis Site-Wide ...

  13. Policy Flash 2014-18 Complex-Wide Strategic Sourcing | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    8 Complex-Wide Strategic Sourcing Policy Flash 2014-18 Complex-Wide Strategic Sourcing Questions concerning this policy flash should be directed to Scott Clemons of the Strategic...

  14. Alternative Fuels Data Center: Maryland County Fleet Uses Wide Variety of

    Alternative Fuels and Advanced Vehicles Data Center

    Alternative Fuels Maryland County Fleet Uses Wide Variety of Alternative Fuels to someone by E-mail Share Alternative Fuels Data Center: Maryland County Fleet Uses Wide Variety of Alternative Fuels on Facebook Tweet about Alternative Fuels Data Center: Maryland County Fleet Uses Wide Variety of Alternative Fuels on Twitter Bookmark Alternative Fuels Data Center: Maryland County Fleet Uses Wide Variety of Alternative Fuels on Google Bookmark Alternative Fuels Data Center: Maryland County

  15. Portsmouth RI/FS Report for the Site-Wide Waste Disposition Evaluation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Project | Department of Energy Site-Wide Waste Disposition Evaluation Project Portsmouth RI/FS Report for the Site-Wide Waste Disposition Evaluation Project This Remedial Investigation and Feasibility Study Report for the Site-Wide Waste Disposition Evaluation Project at the Portsmouth Gaseous Diffusion Plant, Piketon, Ohio, presents the information necessary to select a Site-wide disposal alternative for the waste generated under the Director's Final Findings and Orders (DFF&O) for

  16. People's Republic of China joins WorldWideScience Alliance | OSTI, US Dept

    Office of Scientific and Technical Information (OSTI)

    of Energy Office of Scientific and Technical Information People's Republic of China joins WorldWideScience Alliance Back to the OSTI News Listing for 2008 The People's Republic of China has joined the WorldWideScience Alliance---the multilateral governance structure for the global science gateway, WorldWideScience.org. WorldWideScience.org is intended to accelerate international scientific progress by serving as a single, sophisticated point of access for diverse scientific resources and

  17. Poster - WorldWideScience.org | OSTI, US Dept of Energy, Office...

    Office of Scientific and Technical Information (OSTI)

    WorldWideScience.org Document Files and References Available Downloads for this Document: applicationpdf icon Poster WWS

  18. China Joins WorldWideScience Alliance | OSTI, US Dept of Energy Office of

    Office of Scientific and Technical Information (OSTI)

    Scientific and Technical Information October 14, 2008 China Joins WorldWideScience Alliance Oak Ridge, TN - The U.S. Department of Energy's (DOE) Office of Scientific and Technical Information (OSTI) today announced that the People's Republic of China has joined the WorldWideScience Alliance-the multilateral governance structure for the global science gateway, WorldWideScience.org. WorldWideScience.org is intended to accelerate international scientific progress by serving as a single,

  19. Recommendations on Alternative Analysis in Site-wide NEPA Reviews (DOE,

    Energy Saver

    1992) | Department of Energy on Alternative Analysis in Site-wide NEPA Reviews (DOE, 1992) Recommendations on Alternative Analysis in Site-wide NEPA Reviews (DOE, 1992) The purpose of this memorandum is to recommend the treatment of the proposed action and the no action alternatives in site-wide National Environmental Policy Act reivews that are prepared for continuing and reasonably foreseeable future actions at DOE sites. Recommendations on Alternatives Analysis in Site-wide EISs-1992.pdf

  20. Columbia River Hatchery Reform System-Wide Report.

    SciTech Connect

    Warren, Dan

    2009-04-16

    Puget Sound/Coastal Washington hatchery programs, followed by the development in 2005 of a suite of analytical tools to support application of the principles (all reports and tools are available at www.hatcheryreform.us). In 2005, Congress directed the National Oceanic and Atmospheric Administration-Fisheries (NOAA Fisheries) to replicate the Puget Sound and Coastal Washington Hatchery Reform Project in the Columbia River Basin. The HSRG was expanded to 14 members to include individuals with specific knowledge about the Columbia River salmon and steelhead populations. This second phase was initially envisioned as a one-year review, with emphasis on the Lower Columbia River hatchery programs. It became clear however, that the Columbia River Basin needed to be viewed as an inter-connected ecosystem in order for the review to be useful. The project scope was subsequently expanded to include the entire Basin, with funding for a second year provided by the Bonneville Power Administration (BPA) under the auspices of the Northwest Power and Conservation Council's (NPCC) Fish and Wildlife Program. The objective of the HSRG's Columbia River Basin review was to change the focus of the Columbia River hatchery system. In the past, these hatchery programs have been aimed at supplying adequate numbers of fish for harvest as mitigation primarily for hydropower development in the Basin. A new, ecosystem-based approach is founded on the idea that harvest goals are sustainable only if they are compatible with conservation goals. The challenge before the HSRG was to determine whether or not conservation and harvest goals could be met by fishery managers and, if so, how. The HSRG determined that in order to address these twin goals, both hatchery and harvest reforms are necessary. The HSRG approach represents an important change of direction in managing hatcheries in the region. It provides a clear demonstration that current hatchery programs can indeed be redirected to better meet both

  1. ARM: Surface Radiation Measurement Quality Control testing, including climatologically configurable limits

    DOE Data Explorer

    Shi, Yan; Riihimaki, Laura

    1994-01-07

    Surface Radiation Measurement Quality Control testing, including climatologically configurable limits

  2. Complex-wide review of DOE`s management of low-level radioactive waste - progress to date

    SciTech Connect

    Letourneau, M.J.

    1995-12-31

    The Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 94-2 includes a recommendation that the Department of Energy (DOE) conduct a comprehensive, complex-wide review of the low-level waste issue to establish the dimensions of the low-level waste problem and to identify necessary corrective actions to address the safe disposition of past, present, and future volumes. DOE`s Implementation Plan calls for the conduct of a complex-wide review of low-level radioactive waste treatment, storage, and disposal sites to identify environmental, safety, and health vulnerabilities. The complex-wide review focuses on low-level waste disposal facilities through a site evaluation survey, reviews of existing documentation, and onsite observations. Low-level waste treatment and storage facilities will be assessed for their ability to meet waste acceptance criteria for disposal. Results from the complex-wide review will be used to form the basis for an integrated and planned set of actions to correct the identified vulnerabilities and to prompt development of new requirements for managing low-level waste.

  3. FAINT TIDAL FEATURES IN GALAXIES WITHIN THE CANADA-FRANCE-HAWAII TELESCOPE LEGACY SURVEY WIDE FIELDS

    SciTech Connect

    Atkinson, Adam M.; Abraham, Roberto G.; Ferguson, Annette M. N.

    2013-03-01

    We present an analysis of the detectability of faint tidal features in galaxies from the wide-field component of the Canada-France-Hawaii Telescope Legacy Survey. Our sample consists of 1781 luminous (M{sub r{sup '}}<-19.3 mag) galaxies in the magnitude range 15.5 mag < r' < 17 mag and in the redshift range 0.04 < z < 0.2. Although we have classified tidal features according to their morphology (e.g., streams, shells, and tails), we do not attempt to interpret them in terms of their physical origin (e.g., major versus minor merger debris). Instead, we provide a catalog that is intended to provide raw material for future investigations which will probe the nature of low surface brightness substructure around galaxies. We find that around 12% of the galaxies in our sample show clear tidal features at the highest confidence level. This fraction rises to about 18% if we include systems with convincing, albeit weaker tidal features, and to 26% if we include systems with more marginal features that may or may not be tidal in origin. These proportions are a strong function of rest-frame color and of stellar mass. Linear features, shells, and fans are much more likely to occur in massive galaxies with stellar masses >10{sup 10.5} M {sub Sun }, and red galaxies are twice as likely to show tidal features than are blue galaxies.

  4. Wide-angle ITER-prototype tangential infrared and visible viewing system for DIII-D

    SciTech Connect

    Lasnier, C. J. Allen, S. L.; Ellis, R. E.; Fenstermacher, M. E.; McLean, A. G.; Meyer, W. H.; Morris, K.; Seppala, L. G.; Crabtree, K.; Van Zeeland, M. A.

    2014-11-15

    An imaging system with a wide-angle tangential view of the full poloidal cross-section of the tokamak in simultaneous infrared and visible light has been installed on DIII-D. The optical train includes three polished stainless steel mirrors in vacuum, which view the tokamak through an aperture in the first mirror, similar to the design concept proposed for ITER. A dichroic beam splitter outside the vacuum separates visible and infrared (IR) light. Spatial calibration is accomplished by warping a CAD-rendered image to align with landmarks in a data image. The IR camera provides scrape-off layer heat flux profile deposition features in diverted and inner-wall-limited plasmas, such as heat flux reduction in pumped radiative divertor shots. Demonstration of the system to date includes observation of fast-ion losses to the outer wall during neutral beam injection, and shows reduced peak wall heat loading with disruption mitigation by injection of a massive gas puff.

  5. Characterization of high proper motion objects from the wide-field infrared survey explorer

    SciTech Connect

    Luhman, K. L.; Sheppard, Scott S.

    2014-06-01

    We present an analysis of high proper motion objects that we have found in a recent study and in this work with multi-epoch astrometry from the Wide-field Infrared Survey Explorer (WISE). Using photometry and proper motions from the Two Micron All-Sky Survey and WISE, we have identified the members of this sample that are likely to be late-type, nearby, or metal-poor. We have performed optical and near-infrared spectroscopy on 41 objects, from which we measure spectral types that range from M4-T2.5. This sample includes 11 blue L dwarfs and 5 subdwarfs; the latter were also classified as such in the recent study by Kirkpatrick and coworkers. Based on their spectral types and photometry, several of our spectroscopic targets may have distances of <20 pc with the closest at ∼12 pc. The tangential velocities implied by the spectrophotometric distances and proper motions indicate that four of the five subdwarfs are probably members of the Galactic halo while several other objects, including the early-T dwarf WISE J210529.08–623558.7, may belong to the thick disk.

  6. Complex-Wide Waste Flow Analysis V1.0 verification and validation report

    SciTech Connect

    Hsu, K.M.; Lundeen, A.S.; Oswald, K.B.; Shropshire, D.E.; Robinson, J.M.; West, W.H.

    1997-11-21

    The complex-wide waste flow analysis model (CWWFA) was developed to assist the Department of Energy (DOE) Environmental Management (EM) Office of Science and Technology (EM-50) to evaluate waste management scenarios with emphasis on identifying and prioritizing technology development opportunities to reduce waste flows and public risk. In addition, the model was intended to support the needs of the Complex-Wide Environmental Integration (EMI) team supporting the DOE`s Accelerating Cleanup: 2006 Plan. CWWFA represents an integrated environmental modeling system that covers the life cycle of waste management activities including waste generation, interim process storage, retrieval, characterization and sorting, waste preparation and processing, packaging, final interim storage, transport, and disposal at a final repository. The CWWFA shows waste flows through actual site-specific and facility-specific conditions. The system requirements for CWWFA are documented in the Technical Requirements Document (TRD). The TRD is intended to be a living document that will be modified over the course of the execution of CWWFA development. Thus, it is anticipated that CWWFA will continue to evolve as new requirements are identified (i.e., transportation, small sites, new streams, etc.). This report provides a documented basis for system verification of CWWFA requirements. System verification is accomplished through formal testing and evaluation to ensure that all performance requirements as specified in the TRD have been satisfied. A Requirement Verification Matrix (RVM) was used to map the technical requirements to the test procedures. The RVM is attached as Appendix A. Since February of 1997, substantial progress has been made toward development of the CWWFA to meet the system requirements. This system verification activity provides a baseline on system compliance to requirements and also an opportunity to reevaluate what requirements need to be satisfied in FY-98.

  7. Genome-Wide Analysis of miRNA targets in Brachypodium and Biomass Energy Crops

    SciTech Connect

    Green, Pamela J.

    2015-08-11

    MicroRNAs (miRNAs) contribute to the control of numerous biological processes through the regulation of specific target mRNAs. Although the identities of these targets are essential to elucidate miRNA function, the targets are much more difficult to identify than the small RNAs themselves. Before this work, we pioneered the genome-wide identification of the targets of Arabidopsis miRNAs using an approach called PARE (German et al., Nature Biotech. 2008; Nature Protocols, 2009). Under this project, we applied PARE to Brachypodium distachyon (Brachypodium), a model plant in the Poaceae family, which includes the major food grain and bioenergy crops. Through in-depth global analysis and examination of specific examples, this research greatly expanded our knowledge of miRNAs and target RNAs of Brachypodium. New regulation in response to environmental stress or tissue type was found, and many new miRNAs were discovered. More than 260 targets of new and known miRNAs with PARE sequences at the precise sites of miRNA-guided cleavage were identified and characterized. Combining PARE data with the small RNA data also identified the miRNAs responsible for initiating approximately 500 phased loci, including one of the novel miRNAs. PARE analysis also revealed that differentially expressed miRNAs in the same family guide specific target RNA cleavage in a correspondingly tissue-preferential manner. The project included generation of small RNA and PARE resources for bioenergy crops, to facilitate ongoing discovery of conserved miRNA-target RNA regulation. By associating specific miRNA-target RNA pairs with known physiological functions, the research provides insights about gene regulation in different tissues and in response to environmental stress. This, and release of new PARE and small RNA data sets should contribute basic knowledge to enhance breeding and may suggest new strategies for improvement of biomass energy crops.

  8. Determination of prescription dose for Cs-131 permanent implants using the BED formalism including resensitization correction

    SciTech Connect

    Luo, Wei Molloy, Janelle; Aryal, Prakash; Feddock, Jonathan; Randall, Marcus

    2014-02-15

    Purpose: The current widely used biological equivalent dose (BED) formalism for permanent implants is based on the linear-quadratic model that includes cell repair and repopulation but not resensitization (redistribution and reoxygenation). The authors propose a BED formalism that includes all the four biological effects (4Rs), and the authors propose how it can be used to calculate appropriate prescription doses for permanent implants with Cs-131. Methods: A resensitization correction was added to the BED calculation for permanent implants to account for 4Rs. Using the same BED, the prescription doses with Au-198, I-125, and Pd-103 were converted to the isoeffective Cs-131 prescription doses. The conversion factor F, ratio of the Cs-131 dose to the equivalent dose with the other reference isotope (F{sub r}: with resensitization, F{sub n}: without resensitization), was thus derived and used for actual prescription. Different values of biological parameters such as α, β, and relative biological effectiveness for different types of tumors were used for the calculation. Results: Prescription doses with I-125, Pd-103, and Au-198 ranging from 10 to 160 Gy were converted into prescription doses with Cs-131. The difference in dose conversion factors with (F{sub r}) and without (F{sub n}) resensitization was significant but varied with different isotopes and different types of tumors. The conversion factors also varied with different doses. For I-125, the average values of F{sub r}/F{sub n} were 0.51/0.46, for fast growing tumors, and 0.88/0.77 for slow growing tumors. For Pd-103, the average values of F{sub r}/F{sub n} were 1.25/1.15 for fast growing tumors, and 1.28/1.22 for slow growing tumors. For Au-198, the average values of F{sub r}/F{sub n} were 1.08/1.25 for fast growing tumors, and 1.00/1.06 for slow growing tumors. Using the biological parameters for the HeLa/C4-I cells, the averaged value of F{sub r} was 1.07/1.11 (rounded to 1.1), and the averaged value of F

  9. Final Site-Wide Environmental Assessment U.S. Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Site-Wide Environmental Assessment U.S. Department of Energy National Renewable Energy Laboratory South Table Mountain Campus Golden, Colorado DOE/EA-1968 December 2014 THIS PAGE INTENTIONALLY LEFT BLANK DOE/EA-1968 FINAL SITE-WIDE ENVIRONMENTAL ASSESSMENT U.S. DEPARTMENT OF ENERGY NATIONAL RENEWABLE ENERGY LABORATORY SOUTH TABLE MOUNTAIN CAMPUS GOLDEN, COLORADO U.S. Department of Energy National Renewable Energy Laboratory 15013 Denver West Parkway Golden, CO 80401 DECEMBER 2014 Final Site-Wide

  10. EA-0387: DOE Notice of Availability of the Final Site-Wide Environmental

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Impact Statement | Department of Energy 387: DOE Notice of Availability of the Final Site-Wide Environmental Impact Statement EA-0387: DOE Notice of Availability of the Final Site-Wide Environmental Impact Statement Y-12 National Security Complex, Oak Ridge, TN The National Nuclear Security Administration (NNSA), a semi-autonomous agency within the Department of Energy (DOE), announces the availability of the Final Site-Wide Environmental Impact Statement for the Y-12 National Security

  11. EIS-0309: Notice of Intent to Prepare a Site-Wide Environmental Impact

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Statement | Department of Energy Notice of Intent to Prepare a Site-Wide Environmental Impact Statement EIS-0309: Notice of Intent to Prepare a Site-Wide Environmental Impact Statement Oak Ridge Y-12 Plant Pursuant to the National Environmental Policy Act (NEPA), DOE announces its intent to prepare a Site-Wide Environmental Impact Statement (SWEIS) for the Oak Ridge Y-12 Plant (Y-12), DOE's primary site for enriched uranium operations and storage related to the nation's nuclear weapons

  12. EIS-0426: Draft Site-Wide Environmental Impact Statement | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Draft Site-Wide Environmental Impact Statement EIS-0426: Draft Site-Wide Environmental Impact Statement Continued Operation of the Nevada National Security Site and Off-Site Locations in the State of Nevada Abstract: This Site-Wide Environmental Impact Statement for the Continued Operation of the Department of Energy/National Nuclear Security Administration Nevada National Security Site and Off-Site Locations in the State of Nevada (NNSS SWEIS) analyzes the potential environmental

  13. Who's got more WorldWideScience? Find out on OSTI's YouTube Channel |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information Who's got more WorldWideScience? Find out on OSTI's YouTube Channel Back to the OSTI News Listing for 2009 Who's Got More WorldWideScience? Find out on OSTI's YouTube channel, and then explore WorldWideScience.org to find research from more than 60 countries via one search box

  14. WorldWideScience.org Enhancements: Addition of Arabic Translation, Mobile

    Office of Scientific and Technical Information (OSTI)

    Capability, and Multimedia Results | OSTI, US Dept of Energy Office of Scientific and Technical Information WorldWideScience.org Enhancements: Addition of Arabic Translation, Mobile Capability, and Multimedia Results Back to the OSTI News Listing for 2011 Arabic has been added to the suite of translated languages at WorldWideScience.org, bringing the total number of translated languages to 10. At WorldWideScience.org, your query can be translated into the languages of the search engine's

  15. Novel Approaches to Wide Bandgap CuInSe2 Based Absorbers

    SciTech Connect

    William N. Shafarman

    2011-04-28

    0 ≤ Ag/(Ag+Cu) ≤ 1. Evidence of improved material quality includes reduced sub-bandgap optical absorption, sharper bandtails, and increased grain size with Ag addition. The Ag alloying was shown to increase the range of bandgaps over which solar cells can be fabricated without any drop-off in performance. With bandgap greater than 1.6 eV, in the range needed for tandem solar cells, (AgCu)(InGa)Se2 gave higher efficiency than other CuInSe2-based alloys. Using a simple single-stage co-evaporation process, a solar cell with 17.6% efficiency using a film with bandgap = 1.3 eV was achieved, demonstrating the viability of (AgCu)(InGa)Se2 for high efficiency devices. With a three-stage co-evaporation process for (AgCu)(InGa)Se2 deposition a device with efficiency = 13.0 % and VOC = 890 mV with JSC = 20.5 mA/cm2, FF = 71.3% was achieved. This surpasses the performance of other wide bandgap CuInSe2-based solar cells. Detailed characterization of the electronic properties of the materials and devices including the application of advanced admittance-based easements was completed.

  16. Plant-wide assessment summary: $52 million in savings identified in Equilon assessment

    SciTech Connect

    None, None

    2003-08-01

    Summary of Equilon's plant-wide assessment to identify energy and cost saving opportunities at the corporation's refinery in Martinez, California.

  17. Hanford's Robust Safety Culture Gains One More Site-Wide Safety Standard

    Office of Environmental Management (EM)

    | Department of Energy Robust Safety Culture Gains One More Site-Wide Safety Standard Hanford's Robust Safety Culture Gains One More Site-Wide Safety Standard August 2, 2012 - 12:00pm Addthis Media Contacts Michael Turner, MSA Michael_J_Turner@rl.gov 509-376-2872 Cameron Hardy, DOE Cameron.Hardy@rl.doe.gov 509-376-5365 RICHLAND, Wash. - The safety of the Hanford Site workforce has been bolstered with another program added to the list of Site-wide Safety Standards. The latest Site-wide Safety

  18. Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen and Fuel Cell Applications

    Energy.gov [DOE]

    Presentation slides from the DOE Fuel Cell Technologies Office webinar, Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen and Fuel Cell Applications, held on October 21, 2014.

  19. A simple tool for estimating city-wide annual electrical energy...

    Office of Scientific and Technical Information (OSTI)

    A simple tool for estimating city-wide annual electrical energy savings from cooler surfaces Citation Details In-Document Search This content will become publicly available on ...

  20. EIS-0281: Notice of Intent to Prepare a Site-Wide Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Environmental Impact Statement Sandia National Laboratories, Albuquerque, New Mexico The Department of Energy (DOE) announces its intent to prepare a Site-Wide...

  1. National Training Center (NTC) Launches a New DOE-Wide Voluntary...

    Energy.gov [DOE] (indexed site)

    National Training Center (NTC) Launches a New DOE-Wide Voluntary Training Reciprocity and Collaboration Initiative The Office of Health, Safety and Security's National Training ...

  2. National Training Center (NTC) Launches a New DOE-Wide Voluntary Training Reciprocity and Collaboration Initiative

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Office of Health, Safety and Security's National Training Center (NTC) recently launched an exciting new DOE-wide voluntary Training Reciprocity and Collaboration initiative. Under the...

  3. Y-12 Final Site-Wide Environmental Impact Statement Approved | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) Final Site-Wide Environmental Impact Statement Approved March 02, 2011 Microsoft Office document icon NR-03-2

  4. OSTIblog Articles in the world wide web Topic | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    world wide web Topic The Knowledge Investment Curve by Dr. Walt Warnick 19 Aug, 2009 in Science Communications Every scientist knows that science advances only if knowledge is ...

  5. EIS-0387: Notice of Intent to Prepare a Site-Wide Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Intent to Prepare a Site-Wide Environmental Impact Statement Y-12 National Security Complex The National Nuclear Security Administration (NNSA) announces its intent to prepare a...

  6. EA-0387: DOE Notice of Availability of the Final Site-Wide Environment...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of the Final Site-Wide Environmental Impact Statement Y-12 National Security Complex, Oak Ridge, TN The National Nuclear Security Administration (NNSA), a semi-autonomous...

  7. EIS-0387: DOE Notice of Availability of the Draft Site-Wide Environmen...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of the Draft Site-Wide Environmental Impact Statement Y-12 National Security Complex, Oak Ridge, TN The National Nuclear Security Administration (NNSA), a...

  8. Ray tracing flux calculation for the small and wide angle x-ray...

    Office of Scientific and Technical Information (OSTI)

    Ray tracing flux calculation for the small and wide angle x-ray scattering diffraction station at the SESAME synchrotron radiation facility Citation Details In-Document Search ...

  9. EIS-0309: Notice of Intent to Prepare a Site-Wide Environmental...

    Office of Environmental Management (EM)

    Notice of Intent to Prepare a Site-Wide Environmental Impact Statement Oak Ridge Y-12 Plant Pursuant to the National Environmental Policy Act (NEPA), DOE announces its...

  10. Deputy Secretary Memo on Improving DOE-wide Recruitment and Hiring...

    Energy.gov [DOE] (indexed site)

    Heads of All Departmental Elements and Human Resources Directors on Improving DOE Wide ... Responsible Contacts Kenneth Venuto Director, Office of Human Capital Management E-mail ...

  11. A wide variety of injection molding technologies is now applicable to small series and mass production

    SciTech Connect

    Blo, P., E-mail: bloss@kuz-leipzig.de, E-mail: juettner@kuz-leipzig.de, E-mail: jacob@kuz-leipzig.de, E-mail: loeser@kuz-leipzig.de, E-mail: michaelis@kuz-leipzig.de, E-mail: krajewsky@kuz-leipzig.de; Jttner, G., E-mail: bloss@kuz-leipzig.de, E-mail: juettner@kuz-leipzig.de, E-mail: jacob@kuz-leipzig.de, E-mail: loeser@kuz-leipzig.de, E-mail: michaelis@kuz-leipzig.de, E-mail: krajewsky@kuz-leipzig.de; Jacob, S., E-mail: bloss@kuz-leipzig.de, E-mail: juettner@kuz-leipzig.de, E-mail: jacob@kuz-leipzig.de, E-mail: loeser@kuz-leipzig.de, E-mail: michaelis@kuz-leipzig.de, E-mail: krajewsky@kuz-leipzig.de; Lser, C., E-mail: bloss@kuz-leipzig.de, E-mail: juettner@kuz-leipzig.de, E-mail: jacob@kuz-leipzig.de, E-mail: loeser@kuz-leipzig.de, E-mail: michaelis@kuz-leipzig.de, E-mail: krajewsky@kuz-leipzig.de; Michaelis, J., E-mail: bloss@kuz-leipzig.de, E-mail: juettner@kuz-leipzig.de, E-mail: jacob@kuz-leipzig.de, E-mail: loeser@kuz-leipzig.de, E-mail: michaelis@kuz-leipzig.de, E-mail: krajewsky@kuz-leipzig.de; Krajewsky, P., E-mail: bloss@kuz-leipzig.de, E-mail: juettner@kuz-leipzig.de, E-mail: jacob@kuz-leipzig.de, E-mail: loeser@kuz-leipzig.de, E-mail: michaelis@kuz-leipzig.de, E-mail: krajewsky@kuz-leipzig.de [Kunststoff-Zentrum in Leipzig gGmbH (KuZ), Leipzig (Germany)

    2014-05-15

    Micro plastic parts open new fields for application, e. g., to electronics, sensor technologies, optics, and medical engineering. Before micro parts can go to mass production, there is a strong need of having the possibility for testing different designs and materials including material combinations. Hence, flexible individual technical and technological solutions for processing are necessary. To manufacture high quality micro parts, a micro injection moulding machine named formicaPlast based on a two-step plunger injection technology was developed. Resulting from its design, the residence time and the accuracy problems for managing small shot volumes with reproducible high accuracy are uncompromisingly solved. Due to their simple geometry possessing smooth transitions and non adherent inner surfaces, the plunger units allow to process 'all' thermoplastics from polyolefines to high performance polymers, optical clear polymers, thermally sensitive bioresorbables, highly filled systems (the so-called powder injection molding PIM), and liquid silicon rubber (LSR, here with a special kit). The applied platform strategy in the 1K and 2K version allows integrating automation for assembling, handling and packaging. A perpendicular arrangement allows encapsulation of inserts, also partially, and integration of this machine into process chains. Considering a wide variety of different parts consisting of different materials, the high potential of the technology is demonstrated. Based on challenging industrial parts from electronic applications (2K micro MID and bump mat, where both are highly structured parts), the technological solutions are presented in more detail.

  12. A Computing Environment to Support Repeatable Scientific Big Data Experimentation of World-Wide Scientific Literature

    SciTech Connect

    Schlicher, Bob G; Kulesz, James J; Abercrombie, Robert K; Kruse, Kara L

    2015-01-01

    A principal tenant of the scientific method is that experiments must be repeatable and relies on ceteris paribus (i.e., all other things being equal). As a scientific community, involved in data sciences, we must investigate ways to establish an environment where experiments can be repeated. We can no longer allude to where the data comes from, we must add rigor to the data collection and management process from which our analysis is conducted. This paper describes a computing environment to support repeatable scientific big data experimentation of world-wide scientific literature, and recommends a system that is housed at the Oak Ridge National Laboratory in order to provide value to investigators from government agencies, academic institutions, and industry entities. The described computing environment also adheres to the recently instituted digital data management plan mandated by multiple US government agencies, which involves all stages of the digital data life cycle including capture, analysis, sharing, and preservation. It particularly focuses on the sharing and preservation of digital research data. The details of this computing environment are explained within the context of cloud services by the three layer classification of Software as a Service , Platform as a Service , and Infrastructure as a Service .

  13. Phylum-wide comparative genomics unravel the diversity of secondary metabolism in Cyanobacteria

    SciTech Connect

    Calteau, Alexandra; Fewer, David P.; Latifi, Amel; Coursin, Thrse; Laurent, Thierry; Jokela, Jouni; Kerfeld, Cheryl A.; Sivonen, Kaarina; Piel, Jrn; Gugger, Muriel

    2014-11-18

    Cyanobacteria are an ancient lineage of photosynthetic bacteria from which hundreds of natural products have been described, including many notorious toxins but also potent natural products of interest to the pharmaceutical and biotechnological industries. Many of these compounds are the products of non-ribosomal peptide synthetase (NRPS) or polyketide synthase (PKS) pathways. However, current understanding of the diversification of these pathways is largely based on the chemical structure of the bioactive compounds, while the evolutionary forces driving their remarkable chemical diversity are poorly understood. We carried out a phylum-wide investigation of genetic diversification of the cyanobacterial NRPS and PKS pathways for the production of bioactive compounds. 452 NRPS and PKS gene clusters were identified from 89 cyanobacterial genomes, revealing a clear burst in late-branching lineages. Our genomic analysis further grouped the clusters into 286 highly diversified cluster families (CF) of pathways. Some CFs appeared vertically inherited, while others presented a more complex evolutionary history. Only a few horizontal gene transfers were evidenced amongst strongly conserved CFs in the phylum, while several others have undergone drastic gene shuffling events, which could result in the observed diversification of the pathways. In addition to toxin production, several NRPS and PKS gene clusters are devoted to important cellular processes of these bacteria such as nitrogen fixation and iron uptake. The majority of the biosynthetic clusters identified here have unknown end products, highlighting the power of genome mining for the discovery of new natural products.

  14. Phylum-wide comparative genomics unravel the diversity of secondary metabolism in Cyanobacteria

    DOE PAGES [OSTI]

    Calteau, Alexandra; Fewer, David P.; Latifi, Amel; Coursin, Thérèse; Laurent, Thierry; Jokela, Jouni; Kerfeld, Cheryl A.; Sivonen, Kaarina; Piel, Jörn; Gugger, Muriel

    2014-11-18

    Cyanobacteria are an ancient lineage of photosynthetic bacteria from which hundreds of natural products have been described, including many notorious toxins but also potent natural products of interest to the pharmaceutical and biotechnological industries. Many of these compounds are the products of non-ribosomal peptide synthetase (NRPS) or polyketide synthase (PKS) pathways. However, current understanding of the diversification of these pathways is largely based on the chemical structure of the bioactive compounds, while the evolutionary forces driving their remarkable chemical diversity are poorly understood. We carried out a phylum-wide investigation of genetic diversification of the cyanobacterial NRPS and PKS pathways formore » the production of bioactive compounds. 452 NRPS and PKS gene clusters were identified from 89 cyanobacterial genomes, revealing a clear burst in late-branching lineages. Our genomic analysis further grouped the clusters into 286 highly diversified cluster families (CF) of pathways. Some CFs appeared vertically inherited, while others presented a more complex evolutionary history. Only a few horizontal gene transfers were evidenced amongst strongly conserved CFs in the phylum, while several others have undergone drastic gene shuffling events, which could result in the observed diversification of the pathways. In addition to toxin production, several NRPS and PKS gene clusters are devoted to important cellular processes of these bacteria such as nitrogen fixation and iron uptake. The majority of the biosynthetic clusters identified here have unknown end products, highlighting the power of genome mining for the discovery of new natural products.« less

  15. Method for implantation of high dopant concentrations in wide band gap materials

    DOEpatents

    Usov, Igor; Arendt, Paul N.

    2009-09-15

    A method that combines alternate low/medium ion dose implantation with rapid thermal annealing at relatively low temperatures. At least one dopant is implanted in one of a single crystal and an epitaxial film of the wide band gap compound by a plurality of implantation cycles. The number of implantation cycles is sufficient to implant a predetermined concentration of the dopant in one of the single crystal and the epitaxial film. Each of the implantation cycles includes the steps of: implanting a portion of the predetermined concentration of the one dopant in one of the single crystal and the epitaxial film; annealing one of the single crystal and the epitaxial film and implanted portion at a predetermined temperature for a predetermined time to repair damage to one of the single crystal and the epitaxial film caused by implantation and activates the implanted dopant; and cooling the annealed single crystal and implanted portion to a temperature of less than about 100.degree. C. This combination produces high concentrations of dopants, while minimizing the defect concentration.

  16. Composite materials and bodies including silicon carbide and titanium diboride and methods of forming same

    DOEpatents

    Lillo, Thomas M.; Chu, Henry S.; Harrison, William M.; Bailey, Derek

    2013-01-22

    Methods of forming composite materials include coating particles of titanium dioxide with a substance including boron (e.g., boron carbide) and a substance including carbon, and reacting the titanium dioxide with the substance including boron and the substance including carbon to form titanium diboride. The methods may be used to form ceramic composite bodies and materials, such as, for example, a ceramic composite body or material including silicon carbide and titanium diboride. Such bodies and materials may be used as armor bodies and armor materials. Such methods may include forming a green body and sintering the green body to a desirable final density. Green bodies formed in accordance with such methods may include particles comprising titanium dioxide and a coating at least partially covering exterior surfaces thereof, the coating comprising a substance including boron (e.g., boron carbide) and a substance including carbon.

  17. Wide-angle point-to-point x-ray imaging with almost arbitrarily large angles of incidence

    SciTech Connect

    Bitter, M.; Hill, K. W.; Scott, S.; Feder, R.; Ko, Jinseok; Ince-Cushman, A.; Rice, J. E.

    2008-10-15

    The paper describes a new scheme for wide-angle point-to-point x-ray imaging with almost arbitrarily large angles of incidence by a matched pair of spherically bent crystals to eliminate the astigmatism, which is a well-known imaging error of spherical mirrors. In addition to x rays, the scheme should be applicable to a very broad spectrum of the electromagnetic radiation, including microwaves, infrared and visible light, as well as UV and extreme UV radiation, if the crystals are replaced with appropriate spherical reflectors. The scheme may also be applicable to the imaging with ultrasound.

  18. Appendix D.2 Hanford Site-Wide SSHAC Level 3 PSHA Project

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Appendix D.2 Hanford Site-Wide SSHAC Level 3 PSHA Project April 24, 2014 Hazard Input Document (HID) Final GMC Model Contents Appendix D.2 Hanford Site-Wide SSHAC Level 3 PSHA Project ..................................................... 1 Overview ...................................................................................................................................... 2 Median Motions from Crustal Earthquakes

  19. SBIR/STTR FY15 Phase 2 Awards Announced-Includes Hydrogen Production...

    Energy Saver

    Phase 2 Awards Announced-Includes Hydrogen Production and FCEV Systems SBIRSTTR FY15 Phase 2 Awards Announced-Includes Hydrogen Production and FCEV Systems March 23, 2015 - 3:37pm ...

  20. 2010-02 "Reducing All Outfalls at LANL, Including Sandia Canyon...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    All Outfalls at LANL, Including Sandia Canyon, Relating to Studies and Clean-up of Chromium" 2010-02 "Reducing All Outfalls at LANL, Including Sandia Canyon, Relating to Studies ...

  1. FY17 SBIR Phase I Release 1 FOA Released: Includes Fuel Cell...

    Energy Saver

    FY17 SBIR Phase I Release 1 FOA Released: Includes Fuel Cell Catalysts and Hydrogen Delivery FY17 SBIR Phase I Release 1 FOA Released: Includes Fuel Cell Catalysts and Hydrogen ...

  2. Funding for state, city, and county governments in the state includes: |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Funding for state, city, and county governments in the state includes: Funding for state, city, and county governments in the state includes: Funding for state, city, and county governments in the state includes: (39 KB) More Documents & Publications Funding for state, city, and county governments in the state includes: Project Reports for Washoe Tribe of Nevada and California - 2010 Project Nevada Recovery Act State Memo

  3. Preliminary assessment of the ecological risks to wide-ranging wildlife species on the Oak Ridge Reservation. 1996 update

    SciTech Connect

    Sample, B.E.; Hinzman, R.L.; Jackson, B.L.; Baron, L.

    1996-09-01

    More than approximately 50 years of operations, storage, and disposal of wastes generated by the three facilities on the Oak Ridge Reservation (ORR) (the Oak Ridge K-25 Site, Oak Ridge National Laboratory, and the Oak Ridge Y-12 Plant) has resulted in a mosaic of uncontaminated property and lands that are contaminated to varying degrees. This contaminated property includes source areas and the terrestrial and aquatic habitats down gradient from these source areas. Although the integrator OUs generally contain considerable habitat for biota, the source OUs provide little or no suitable habitat. Historically, ecological risk assessment at Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) sites has focused on species that may be definitively associated with a contaminated area or source OU. Endpoints considered in source OUs include plants, soil/litter invertebrates and processes, aquatic biota found in on-OU sediments and surface waters, and small herbivorous, omnivorous, and vermivorous (i.e., feeding on ground, litter, or soil invertebrates) wildlife. All of these endpoints have limited spatial distributions or home ranges such that numerous individuals or a distinct population can be expected to reside within the boundaries of the source OU. Most analyses are not adequate for large sites with multiple, spatially separated contaminated areas such as the ORR that provide habitat for wide-ranging wildlife species. This report is a preliminary response to a plan for assessing risks to wide-ranging species.

  4. Photovoltaic Device Including A Boron Doping Profile In An I-Type Layer

    DOEpatents

    Yang, Liyou

    1993-10-26

    A photovoltaic cell for use in a single junction or multijunction photovoltaic device, which includes a p-type layer of a semiconductor compound including silicon, an i-type layer of an amorphous semiconductor compound including silicon, and an n-type layer of a semiconductor compound including silicon formed on the i-type layer. The i-type layer including an undoped first sublayer formed on the p-type layer, and a boron-doped second sublayer formed on the first sublayer.

  5. Wide cool and ultracool companions to nearby stars from Pan-STARRS 1

    SciTech Connect

    Deacon, Niall R.; Liu, Michael C.; Magnier, Eugene A.; Aller, Kimberly M.; Best, William M. J.; Bowler, Brendan P.; Burgett, William S.; Chambers, Kenneth C.; Flewelling, H.; Kaiser, Nick; Kudritzki, Rolf-Peter; Morgan, Jeff S.; Tonry, John L.; Dupuy, Trent; Mann, Andrew W.; Redstone, Joshua A.; Draper, Peter W.; Metcalfe, Nigel; Hodapp, Klaus W.; Price, Paul A.; and others

    2014-09-10

    We present the discovery of 57 wide (>5'') separation, low-mass (stellar and substellar) companions to stars in the solar neighborhood identified from Pan-STARRS 1 (PS1) data and the spectral classification of 31 previously known companions. Our companions represent a selective subsample of promising candidates and span a range in spectral type of K7-L9 with the addition of one DA white dwarf. These were identified primarily from a dedicated common proper motion search around nearby stars, along with a few as serendipitous discoveries from our Pan-STARRS 1 brown dwarf search. Our discoveries include 23 new L dwarf companions and one known L dwarf not previously identified as a companion. The primary stars around which we searched for companions come from a list of bright stars with well-measured parallaxes and large proper motions from the Hipparcos catalog (8583 stars, mostly A-K dwarfs) and fainter stars from other proper motion catalogs (79170 stars, mostly M dwarfs). We examine the likelihood that our companions are chance alignments between unrelated stars and conclude that this is unlikely for the majority of the objects that we have followed-up spectroscopically. We also examine the entire population of ultracool (>M7) dwarf companions and conclude that while some are loosely bound, most are unlikely to be disrupted over the course of ?10 Gyr. Our search increases the number of ultracool M dwarf companions wider than 300 AU by 88% and increases the number of L dwarf companions in the same separation range by 82%. Finally, we resolve our new L dwarf companion to HIP 6407 into a tight (0.''13, 7.4 AU) L1+T3 binary, making the system a hierarchical triple. Our search for these key benchmarks against which brown dwarf and exoplanet atmosphere models are tested has yielded the largest number of discoveries to date.

  6. Second Site-Wide Five-Year Review of Cleanup at DOE's Idaho Site

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Completed; Report Now Available Online | Department of Energy Second Site-Wide Five-Year Review of Cleanup at DOE's Idaho Site Completed; Report Now Available Online Second Site-Wide Five-Year Review of Cleanup at DOE's Idaho Site Completed; Report Now Available Online February 3, 2011 - 12:00pm Addthis Media Contact Danielle Miller (DOE-ID) 208-526-5709 An Idaho Cleanup Project team has completed work on the site-wide five-year review of cleanup at the U.S. Department of Energy's (DOE)

  7. Wide dynamic range neutron flux monitor having fast time response for the Large Helical Device

    SciTech Connect

    Isobe, M. Takeiri, Y.; Ogawa, K.; Miyake, H.; Hayashi, H.; Kobuchi, T.; Nakano, Y.; Watanabe, K.; Uritani, A.; Misawa, T.; Nishitani, T.; Tomitaka, M.; Kumagai, T.; Mashiyama, Y.; Ito, D.; Kono, S.; Yamauchi, M.

    2014-11-15

    A fast time response, wide dynamic range neutron flux monitor has been developed toward the LHD deuterium operation by using leading-edge signal processing technologies providing maximum counting rate up to ∼5 × 10{sup 9} counts/s. Because a maximum total neutron emission rate over 1 × 10{sup 16} n/s is predicted in neutral beam-heated LHD plasmas, fast response and wide dynamic range capabilities of the system are essential. Preliminary tests have demonstrated successful performance as a wide dynamic range monitor along the design.

  8. Genome-wide analysis of the omega-3 fatty acid desaturase gene family in Gossypium

    DOE PAGES [OSTI]

    Yurchenko, Olga P.; Park, Sunjung; Ilut, Daniel C.; Inmon, Jay J.; Millhollon, Jon C.; Liechty, Zach; Page, Justin T.; Jenks, Matthew A.; Chapman, Kent D.; Udall, Joshua A.; et al

    2014-11-18

    The majority of commercial cotton varieties planted worldwide are derived from Gossypium hirsutum, which is a naturally occurring allotetraploid produced by interspecific hybridization of A- and D-genome diploid progenitor species. While most cotton species are adapted to warm, semi-arid tropical and subtropical regions, and thus perform well in these geographical areas, cotton seedlings are sensitive to cold temperature, which can significantly reduce crop yields. One of the common biochemical responses of plants to cold temperatures is an increase in omega-3 fatty acids, which protects cellular function by maintaining membrane integrity. The purpose of our study was to identify and characterizemore » the omega-3 fatty acid desaturase (FAD) gene family in G. hirsutum, with an emphasis on identifying omega-3 FADs involved in cold temperature adaptation. Results: Eleven omega-3 FAD genes were identified in G. hirsutum, and characterization of the gene family in extant A and D diploid species (G. herbaceum and G. raimondii, respectively) allowed for unambiguous genome assignment of all homoeologs in tetraploid G. hirsutum. The omega-3 FAD family of cotton includes five distinct genes, two of which encode endoplasmic reticulum-type enzymes (FAD3-1 and FAD3-2) and three that encode chloroplast-type enzymes (FAD7/8-1, FAD7/8-2, and FAD7/8-3). The FAD3-2 gene was duplicated in the A genome progenitor species after the evolutionary split from the D progenitor, but before the interspecific hybridization event that gave rise to modern tetraploid cotton. RNA-seq analysis revealed conserved, gene-specific expression patterns in various organs and cell types and semi-quantitative RT-PCR further revealed that FAD7/8-1 was specifically induced during cold temperature treatment of G. hirsutum seedlings. Conclusions: The omega-3 FAD gene family in cotton was characterized at the genome-wide level in three species, showing relatively ancient establishment of the gene family prior

  9. The Hanford Site-Wide Risk Review Project | Department of Energy

    Office of Environmental Management (EM)

    December 11, 2014 To view all the P&RA CoP 2014 Technical Exchange Meeting videos click here. Video Presentation PDF icon The Hanford Site-Wide Risk Review Project More...

  10. V-209:Cisco WAAS (Wide Area Application Services) Arbitrary Code Execution Vulnerabilities

    Energy.gov [DOE]

    Cisco Wide Area Application Services (WAAS) when configured as Central Manager (CM), contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code on the affected system.

  11. New York State-wide Alternative Fuel Vehicle Program for Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. PDF icon tiarravt053bolton2010p.pdf More Documents & Publications New York State-wide Alternative Fuel Vehicle...

  12. Second site-wide five-year review of cleanup at DOE?s Idaho...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NEWS MEDIA CONTACT: Danielle Miller (DOE-ID) 208-526-5709 FOR IMMEDIATE RELEASE: Thursday, February 3, 2011 Second site-wide five-year review of cleanup at DOEs Idaho site...

  13. Webinar: Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen and Fuel Cell Applications

    Energy.gov [DOE]

    The Energy Department will present a live webinar titled "Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen and Fuel Cell Applications" on Tuesday, October 21, at 12:00 p...

  14. Agencies announce second site-wide five-year review of cleanup...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NEWS MEDIA CONTACT: Danielle Miller (DOE-ID) 208-526-5709 Joseph Campbell (CWI) 208-360-0142 FOR IMMEDIATE RELEASE: Wednesday, April 14, 2010 Agencies announce second site-wide ...

  15. Webinar: Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen and Fuel Cell Applications

    Energy.gov [DOE]

    Recording and text version of the Fuel Cell Technologies Office webinar titled "Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen and Fuel Cell Applications," originally presented on October 21, 2014.

  16. DOE Issues Record of Decision on Y-12 Site-Wide Environmental Impact

    National Nuclear Security Administration (NNSA)

    Statement | National Nuclear Security Administration | (NNSA) Issues Record of Decision on Y-12 Site-Wide Environmental Impact Statement March 11, 2002 PDF icon 3-11-02.pdf

  17. Enhanced conversion efficiency in wide-bandgap GaNP solar cells...

    Office of Scientific and Technical Information (OSTI)

    Enhanced conversion efficiency in wide-bandgap GaNP solar cells Citation Details In-Document Search This content will become publicly available on October 12, 2016 Title: Enhanced...

  18. Commonwealth Aluminum: Manufacturer Conducts Plant-Wide Energy Assessments at Two Aluminum Sheet Production Operations

    Energy.gov [DOE]

    This case study describes how Commonwealth Industries (now Aleris Rolled Products) conducted plant-wide energy assessments at its aluminum sheet rolling mills in Lewisport, Kentucky, and Uhrichsville, Ohio, to improve process and energy efficiency.

  19. Establishment of WorldWideScience Alliance | OSTI, US Dept of...

    Office of Scientific and Technical Information (OSTI)

    It is an incredible tool for scientists and science-attentive citizens to have this kind of access to their ... This is not a new idea. What is new is its wide acceptance and the ...

  20. Transport of fast electrons in a nanowire array with collisional effects included

    SciTech Connect

    Li, Boyuan; Zhang, Zhimeng; Wang, Jian; Zhang, Bo; Zhao, Zongqing; Shan, Lianqiang; Zhou, Weimin; Zhang, Baohan; Cao, Lihua; Gu, Yuqiu

    2015-12-15

    The transport of picosecond laser generated fast electrons in a nanowire array is studied with two-dimensional particle-in-cell simulations. Our simulations show that a fast electron beam is initially guided and collimated by strong magnetic filaments in the array. Subsequently, after the decomposition of the structure of nanowire array due to plasma expansion, the beam is still collimated by the resistive magnetic field. An analytical model is established to give a criterion for long-term beam collimation in a nanowire array; it indicates that the nanowire cell should be wide enough to keep the beam collimated in picosecond scale.

  1. Photovoltaic module kit including connector assembly for non-penetrating array installation

    DOEpatents

    Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

    2011-11-22

    A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assembled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting region of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized to slidably receive the male fastener, with all of the connector heads being identical.

  2. Photovoltaic module kit including connector assembly for non-penetrating array installation

    DOEpatents

    Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

    2012-10-23

    A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assembled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting region of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized to slidably receive the male fastener, with all of the connector heads being identical.

  3. Photovoltaic module kit including connector assembly for non-penetrating array installation

    DOEpatents

    Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

    2013-12-31

    A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assempbled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting regions of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized slidably receive the male fastener, with all of the connector heads being identical.

  4. NREL: Climate Neutral Research Campuses - Campus-Wide Measures Have Greater

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Potential Campus-Wide Measures Have Greater Potential Pursuing climate neutrality on research campuses fits into the bigger picture of addressing the impacts of climate change and fossil-fuel depletion. International scientific bodies addressing climate change are calling for reductions of carbon emissions of 80% by 2050. Because of their size and complexity, research campuses are well positioned to take advantage of campus-wide efficient energy systems. For example, many campuses have

  5. Portsmouth Proposed Plan for the Site-wide Waste Disposition Evaluation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Project | Department of Energy Proposed Plan for the Site-wide Waste Disposition Evaluation Project Portsmouth Proposed Plan for the Site-wide Waste Disposition Evaluation Project DOE has evaluated alternatives for managing waste that would be created by decomtamination and decommissioning of the buildings at the Portsmouth Site. Three remedial alternatives for management of anticipated Portsmouth waste were developed for consideration. This Proposed Plan describes the required no-action

  6. Research from Russia added to WorldWideScience.org | OSTI, US Dept of

    Office of Scientific and Technical Information (OSTI)

    Energy Office of Scientific and Technical Information from Russia added to WorldWideScience.org Back to the OSTI News Listing for 2009 A database containing approximately 5,000 project summaries of research taking place in Russia and several former Soviet states has been added to WorldWideScience.org, the one-stop gateway to online global science information. The International Science and Technology Center (ISTC), established by international agreement in November 1992 as a nonproliferation

  7. Kentucky Launches State-Wide School Energy Manager Program | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Kentucky Launches State-Wide School Energy Manager Program Kentucky Launches State-Wide School Energy Manager Program August 17, 2010 - 2:00pm Addthis Kentucky's School Energy Managers pose for a photo during an orientation session. | Photo courtesy of Chris Wooten, Kentucky Pollution Prevention Center Kentucky's School Energy Managers pose for a photo during an orientation session. | Photo courtesy of Chris Wooten, Kentucky Pollution Prevention Center Paul Lester Paul Lester Digital

  8. EIS-0426: DOE Notice of Availability of the Draft Site-Wide Environmental

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Impact Statement and Notice of Public Hearings | Department of Energy 6: DOE Notice of Availability of the Draft Site-Wide Environmental Impact Statement and Notice of Public Hearings EIS-0426: DOE Notice of Availability of the Draft Site-Wide Environmental Impact Statement and Notice of Public Hearings Continued Operation of the Nevada National Security Site and Off-Site Locations in the State of Nevada The National Nuclear Security Administration (NNSA), a separately organized

  9. EA-1440-S1: Final Supplement to the Site-Wide Environmental Assessment |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy -S1: Final Supplement to the Site-Wide Environmental Assessment EA-1440-S1: Final Supplement to the Site-Wide Environmental Assessment National Renewable Energy Laboratory's South Table Mountain Complex, Golden Field Office, National Renewable Energy Laboratory The Department of Energy (DOE) is proposing an action consisting of three site development projects at the National Renewable Energy Laboratory's (NREL) South Table Mountain (STM) site at Golden, Colorado:

  10. Los Alamos to tackle modernizing energy grid in DOE-wide Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    consortium Modernizing energy grid in DOE-wide Laboratory consortium Los Alamos to tackle modernizing energy grid in DOE-wide Laboratory consortium Up to $35.25 million in research funding could come to Los Alamos and its partners. January 14, 2016 The Grid Modernization Initiative represents a comprehensive DOE effort to help shape the future of our nation's grid and solve the challenges of integrating conventional and renewable sources with energy storage and smart buildings. The Grid

  11. FINAL Letter v1, 1/12/15, CRESP Site-Wide Risk Review Project 1

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Letter v1, 1/12/15, CRESP Site-Wide Risk Review Project 1 Author: Pam Larsen The Honorable Monica Regalbuto Assistant Secretary for Environmental Management Subject: Discontinue funding for CRESP studies from Hanford cleanup dollars Dear Assistant Secretary Regalbuto: The Hanford Advisory Board (HAB) is writing with respect to the draft Hanford Site-Wide Risk Review Project's Interim Progress Report (August 31, 2015), prepared by the Consortium for Risk Evaluation with Stakeholder Participation

  12. Government-Wide Diversity and Inclusion Strategic Plan (2011), Office of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Personnel Management | Department of Energy Government-Wide Diversity and Inclusion Strategic Plan (2011), Office of Personnel Management Government-Wide Diversity and Inclusion Strategic Plan (2011), Office of Personnel Management This document, required by Executive Order 13583, provides a shared direction, encourages commitment, and creates alignment so agencies can approach their workplace diversity and inclusion efforts in a coordinated, collaborative, and integrated manner. Three key

  13. India Added to WorldWideScience.org | OSTI, US Dept of Energy Office of

    Office of Scientific and Technical Information (OSTI)

    Scientific and Technical Information FOR IMMEDIATE RELEASE January 29, 2008 India Added to WorldWideScience.org Online gateway makes world's science available to citizens everywhere Oak Ridge, TN - WorldWideScience.org, the online gateway that makes the world's science readily available to researchers and citizens alike, recently added four important science sources from India to its global reach. Users can search these and many other science sources from a single entry point and retrieve

  14. WorldWideScience Alliance Ceremony Podcast Released | OSTI, US Dept of

    Office of Scientific and Technical Information (OSTI)

    Energy Office of Scientific and Technical Information Ceremony Podcast Released Back to the OSTI News Listing for 2008 OSTI recently released a WorldWideScience Alliance podcast. WorldWideScience.org enables anyone with Internet access to launch a single-query search of scientific databases and portals from countries across the globe, covering six continents and nearly half of the world's population. Officials gathered on June 12 in Seoul, Korea to formalize their commitment to sustain and

  15. WorldWideScience Alliance Video now available | OSTI, US Dept of Energy

    Office of Scientific and Technical Information (OSTI)

    Office of Scientific and Technical Information Video now available Back to the OSTI News Listing for 2008 A video is now available of the WorldWideScience Alliance signing ceremony held June 12, 2008 in Seoul, Korea. Department of Energy then Associate Under Secretary for Science, Dr. Jeffrey Salmon, was the keynote speaker and Dr. Walter Warnick of OSTI presided. The multilateral alliance of 38 countries was established to support the global science gateway WorldWideScience.org. OSTI

  16. WorldWideScience.org Extends Global Reach to Africa | OSTI, US Dept of

    Office of Scientific and Technical Information (OSTI)

    Energy Office of Scientific and Technical Information org Extends Global Reach to Africa Back to the OSTI News Listing for 2007 WorldWideScience.org now provides access to scientific knowledge from all seven continents. The most recent addition is the South African Council for Scientific and Industrial Research. OSTI manages and hosts WorldWideScience.org, a global science gateway using federated search for one-stop access to international science sources. The newest addition, CSIR, is an

  17. WorldWideScience.org Goes Multilingual | OSTI, US Dept of Energy Office of

    Office of Scientific and Technical Information (OSTI)

    Scientific and Technical Information News Media Contact: Cathey Daniels, OSTI, (865) 576-9539 FOR IMMEDIATE RELEASE Friday, June 11, 2010 WorldWideScience.org Goes Multilingual OAK RIDGE, TN - Now you can find non-English scientific literature from databases in China, Russia, France, and several Latin American countries and have your search results translated into one of nine languages. With the beta launch today (view the Office of Science announcement) of Multilingual WorldWideScience.org,

  18. WorldWideScience.org: China's Participation Expands Access to Global

    Office of Scientific and Technical Information (OSTI)

    Science | OSTI, US Dept of Energy Office of Scientific and Technical Information Wednesday, June 10, 2009 WorldWideScience.org: China's Participation Expands Access to Global Science Ottawa, Canada Government officials today formalized the addition of the People's Republic of China as the most recent member of the WorldWideScience Alliance. The signing ceremony was held in Ottawa, Canada. The addition of the Chinese database, from the Institute of Scientific and Technical Information of

  19. SEP Success Story: Kentucky Launches State-Wide School Energy Manager

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Program | Department of Energy Kentucky Launches State-Wide School Energy Manager Program SEP Success Story: Kentucky Launches State-Wide School Energy Manager Program August 17, 2010 - 9:29am Addthis Kentucky's School Energy Managers pose for a photo during an orientation session. | Photo courtesy of Chris Wooten, Kentucky Pollution Prevention Center Kentucky's School Energy Managers pose for a photo during an orientation session. | Photo courtesy of Chris Wooten, Kentucky Pollution

  20. Benefits of Site-wide NEPA National Environmental Policy Act Review (1994)

    Energy.gov [DOE]

    The purpose of this guidance memorandum is to describe potential benefits of conducting a site-wide NEPA review (environmental impact statement orenvironmental assessment). Site-wide reviews can aid the Department of Energy (DOE) in meeting its goals to streamline the NEPA process, to make that process more useful to decision makers and thepublic, and to reduce the time and cost required to prepare NEPA documents.

  1. SBIR/STTR Release 2 Funding Opportunity Deadline December 15-Includes

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hydrogen and Fuel Cells | Department of Energy Funding Opportunity Deadline December 15-Includes Hydrogen and Fuel Cells SBIR/STTR Release 2 Funding Opportunity Deadline December 15-Includes Hydrogen and Fuel Cells December 8, 2014 - 3:49pm Addthis The Department of Energy (DOE) has issued its FY 2015 Phase I Release 2 Funding Opportunity Announcement (DE-FOA-0001227) for the Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) Programs. This FOA includes

  2. FY17 SBIR Phase I Release 1 FOA Released: Includes Fuel Cell Catalysts and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hydrogen Delivery | Department of Energy FOA Released: Includes Fuel Cell Catalysts and Hydrogen Delivery FY17 SBIR Phase I Release 1 FOA Released: Includes Fuel Cell Catalysts and Hydrogen Delivery August 23, 2016 - 12:00pm Addthis The U.S. Department of Energy (DOE) has announced the 2017 Small Business Innovation Research and Small Business Technology Transfer (SBIR/STTR) Phase I Release 1 Funding Opportunity Announcement (FOA), including two subtopics focused on hydrogen and fuel cell

  3. FY17 SBIR Phase I Release 1 Topics Announced: Includes Fuel Cell Catalysts

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and Hydrogen Delivery | Department of Energy Topics Announced: Includes Fuel Cell Catalysts and Hydrogen Delivery FY17 SBIR Phase I Release 1 Topics Announced: Includes Fuel Cell Catalysts and Hydrogen Delivery July 21, 2016 - 1:22pm Addthis The U.S. Department of Energy (DOE) has announced the 2017 Small Business Innovation Research and Small Business Technology Transfer (SBIR/STTR) Phase I Release 1 topics, including two subtopics focused on hydrogen and fuel cell technologies. The fuel

  4. FY16 SBIR Phase II Release 1 Awards Announced: Includes Hydrogen...

    Office of Environmental Management (EM)

    6 SBIR Phase II Release 1 Awards Announced: Includes Hydrogen Contaminants Detection, Fuel Cell and Hydrogen Catalysis, and Alkaline Membrane Electrolysis FY16 SBIR Phase II ...

  5. Quantitative Analysis of Biofuel Sustainability, Including Land Use Change GHG Emissions

    Energy.gov [DOE]

    Plenary V: Biofuels and Sustainability: Acknowledging Challenges and Confronting MisconceptionsQuantitative Analysis of Biofuel Sustainability, Including Land Use Change GHG EmissionsJennifer B....

  6. FY17 SBIR Phase I Release 1 Topics Announced: Includes Fuel Cell...

    Energy.gov [DOE] (indexed site)

    The fuel cell subtopic includes novel, durable supports for low-platinum group metal (PGM) catalysts for polymer electrolyte membrane (PEM) fuel cells. The hydrogen delivery ...

  7. SBIR/STTR FY16 Phase 1 Release 1 Awards Announced-Includes Four...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Four for Fuel Cell Membrane Development SBIRSTTR FY16 Phase 1 Release 1 Awards Announced-Includes Four for Fuel Cell Membrane Development January 28, 2016 - ...

  8. Executive Order 13583, Establishing a Coordinated Government-Wide Initiative to Promote Diversity and Inclusion in the Federal Workforce

    Energy.gov [DOE]

    Establishes a "coordinated government-wide initiative to promote diversity and inclusion in the federal workforce".

  9. Development of a plant-wide dynamic model of an integrated gasification combined cycle (IGCC) plant

    SciTech Connect

    Bhattacharyya, D.; Turton, R.; Zitney, S.

    2009-01-01

    In this presentation, development of a plant-wide dynamic model of an advanced Integrated Gasification Combined Cycle (IGCC) plant with CO2 capture will be discussed. The IGCC reference plant generates 640 MWe of net power using Illinois No.6 coal as the feed. The plant includes an entrained, downflow, General Electric Energy (GEE) gasifier with a radiant syngas cooler (RSC), a two-stage water gas shift (WGS) conversion process, and two advanced 'F' class combustion turbines partially integrated with an elevated-pressure air separation unit (ASU). A subcritical steam cycle is considered for heat recovery steam generation. Syngas is selectively cleaned by a SELEXOL acid gas removal (AGR) process. Sulfur is recovered using a two-train Claus unit with tail gas recycle to the AGR. A multistage intercooled compressor is used for compressing CO2 to the pressure required for sequestration. Using Illinois No.6 coal, the reference plant generates 640 MWe of net power. The plant-wide steady-state and dynamic IGCC simulations have been generated using the Aspen Plus{reg_sign} and Aspen Plus Dynamics{reg_sign} process simulators, respectively. The model is generated based on the Case 2 IGCC configuration detailed in the study available in the NETL website1. The GEE gasifier is represented with a restricted equilibrium reactor model where the temperature approach to equilibrium for individual reactions can be modified based on the experimental data. In this radiant-only configuration, the syngas from the Radiant Syngas Cooler (RSC) is quenched in a scrubber. The blackwater from the scrubber bottom is further cleaned in the blackwater treatment plant. The cleaned water is returned back to the scrubber and also used for slurry preparation. The acid gas from the sour water stripper (SWS) is sent to the Claus plant. The syngas from the scrubber passes through a sour shift process. The WGS reactors are modeled as adiabatic plug flow reactors with rigorous kinetics based on the mid

  10. Systems and strippable coatings for decontaminating structures that include porous material

    DOEpatents

    Fox, Robert V.; Avci, Recep; Groenewold, Gary S.

    2011-12-06

    Methods of removing contaminant matter from porous materials include applying a polymer material to a contaminated surface, irradiating the contaminated surface to cause redistribution of contaminant matter, and removing at least a portion of the polymer material from the surface. Systems for decontaminating a contaminated structure comprising porous material include a radiation device configured to emit electromagnetic radiation toward a surface of a structure, and at least one spray device configured to apply a capture material onto the surface of the structure. Polymer materials that can be used in such methods and systems include polyphosphazine-based polymer materials having polyphosphazine backbone segments and side chain groups that include selected functional groups. The selected functional groups may include iminos, oximes, carboxylates, sulfonates, .beta.-diketones, phosphine sulfides, phosphates, phosphites, phosphonates, phosphinates, phosphine oxides, monothio phosphinic acids, and dithio phosphinic acids.

  11. Systems including catalysts in porous zeolite materials within a reactor for use in synthesizing hydrocarbons

    DOEpatents

    Rolllins, Harry W.; Petkovic, Lucia M.; Ginosar, Daniel M.

    2012-07-24

    Catalytic structures include a catalytic material disposed within a zeolite material. The catalytic material may be capable of catalyzing a formation of methanol from carbon monoxide and/or carbon dioxide, and the zeolite material may be capable of catalyzing a formation of hydrocarbon molecules from methanol. The catalytic material may include copper and zinc oxide. The zeolite material may include a first plurality of pores substantially defined by a crystal structure of the zeolite material and a second plurality of pores dispersed throughout the zeolite material. Systems for synthesizing hydrocarbon molecules also include catalytic structures. Methods for synthesizing hydrocarbon molecules include contacting hydrogen and at least one of carbon monoxide and carbon dioxide with such catalytic structures. Catalytic structures are fabricated by forming a zeolite material at least partially around a template structure, removing the template structure, and introducing a catalytic material into the zeolite material.

  12. Methods of using structures including catalytic materials disposed within porous zeolite materials to synthesize hydrocarbons

    DOEpatents

    Rollins, Harry W.; Petkovic, Lucia M.; Ginosar, Daniel M.

    2011-02-01

    Catalytic structures include a catalytic material disposed within a zeolite material. The catalytic material may be capable of catalyzing a formation of methanol from carbon monoxide and/or carbon dioxide, and the zeolite material may be capable of catalyzing a formation of hydrocarbon molecules from methanol. The catalytic material may include copper and zinc oxide. The zeolite material may include a first plurality of pores substantially defined by a crystal structure of the zeolite material and a second plurality of pores dispersed throughout the zeolite material. Systems for synthesizing hydrocarbon molecules also include catalytic structures. Methods for synthesizing hydrocarbon molecules include contacting hydrogen and at least one of carbon monoxide and carbon dioxide with such catalytic structures. Catalytic structures are fabricated by forming a zeolite material at least partially around a template structure, removing the template structure, and introducing a catalytic material into the zeolite material.

  13. Scale Matters: An Action Plan for Realizing Sector-Wide"Zero-Energy" Performance Goals in Commercial Buildings

    SciTech Connect

    Selkowitz, Stephen; Selkowitz, Stephen; Granderson, Jessica; Haves, Philip; Mathew, Paul; Harris, Jeff

    2008-06-16

    It is widely accepted that if the United States is to reduce greenhouse gas emissions it must aggressively address energy end use in the building sector. While there have been some notable but modest successes with mandatory and voluntary programs, there have also been puzzling failures to achieve expected savings. Collectively, these programs have not yet reached the majority of the building stock, nor have they yet routinely produced very large savings in individual buildings. Several trends that have the potential to change this are noteworthy: (1) the growing market interest in 'green buildings' and 'sustainable design', (2) the major professional societies (e.g. AIA, ASHRAE) have more aggressively adopted significant improvements in energy efficiency as strategic goals, e.g. targeting 'zero energy', carbon-neutral buildings by 2030. While this vision is widely accepted as desirable, unless there are significant changes to the way buildings are routinely designed, delivered and operated, zero energy buildings will remain a niche phenomenon rather than a sector-wide reality. Toward that end, a public/private coalition including the Alliance to Save Energy, LBNL, AIA, ASHRAE, USGBC and the World Business Council for Sustainable Development (WBCSD) are developing an 'action plan' for moving the U.S. commercial building sector towards zero energy performance. It addresses regional action in a national framework; integrated deployment, demonstration and R&D threads; and would focus on measurable, visible performance indicators. This paper outlines this action plan, focusing on the challenge, the key themes, and the strategies and actions leading to substantial reductions in GHG emissions by 2030.

  14. Energy Department Expands Gas Gouging Reporting System to Include 1-800

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Number: 1-800-244-3301 | Department of Energy Expands Gas Gouging Reporting System to Include 1-800 Number: 1-800-244-3301 Energy Department Expands Gas Gouging Reporting System to Include 1-800 Number: 1-800-244-3301 September 6, 2005 - 9:50am Addthis Washington, DC - Energy Secretary Samuel W. Bodman announced today that the Department of Energy has expanded its gas gouging reporting system to include a toll-free telephone hotline. The hotline is available to American consumers starting

  15. Electrical machines and assemblies including a yokeless stator with modular lamination stacks

    DOEpatents

    Qu, Ronghai; Jansen, Patrick Lee; Bagepalli, Bharat Sampathkumar; Carl, Jr., Ralph James; Gadre, Aniruddha Dattatraya; Lopez, Fulton Jose

    2010-04-06

    An electrical machine includes a rotor with an inner rotor portion and an outer rotor portion, and a double-sided yokeless stator. The yokeless stator includes modular lamination stacks and is configured for radial magnetic flux flow. The double-sided yokeless stator is concentrically disposed between the inner rotor portion and the outer rotor portion of the electrical machine. Examples of particularly useful embodiments for the electrical machine include wind turbine generators, ship propulsion motors, switch reluctance machines and double-sided synchronous machines.

  16. SBIR/STTR FY15 Release 1 Awards Announced-Includes Fuel Cell Catalyst and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hydrogen Contamination Detection R&D | Department of Energy Release 1 Awards Announced-Includes Fuel Cell Catalyst and Hydrogen Contamination Detection R&D SBIR/STTR FY15 Release 1 Awards Announced-Includes Fuel Cell Catalyst and Hydrogen Contamination Detection R&D January 21, 2015 - 11:34am Addthis The U.S. Department of Energy has announced the 2015 Small Business Innovation Research and Small Business Technology Transfer (SBIR/STTR) Phase I Release 1 Awards, including

  17. SBIR/STTR Release 2 Topics Announced-Includes Hydrogen and Fuel Cells |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Topics Announced-Includes Hydrogen and Fuel Cells SBIR/STTR Release 2 Topics Announced-Includes Hydrogen and Fuel Cells October 31, 2014 - 12:05pm Addthis The 2015 Small Business Innovation Research and Small Business Technology Transfer (SBIR/STTR) Phase I Release 2 topics have been released and include two hydrogen and fuel cell related topics: fuel cell-battery electric hybrid trucks and in-line quality control devices for polymer electrolyte membrane (PEM) fuel

  18. Nuclear Arms Control R&D Consortium includes Los Alamos

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Nuclear Arms Control R&D Consortium includes Los Alamos Nuclear Arms Control R&D Consortium includes Los Alamos A consortium led by the University of Michigan that includes LANL as a partner has been awarded a $25 million grant by the NNSA. April 7, 2014 A neutron detector like this one at Los Alamos National Laboratory is an invaluable national-security technology tool. Researchers at Los Alamos can help train and mentor the next generation of nation-security scientists thanks to

  19. SBIR/STTR FY15 Phase 2 Awards Announced-Includes Hydrogen Production and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    FCEV Systems | Department of Energy FY15 Phase 2 Awards Announced-Includes Hydrogen Production and FCEV Systems SBIR/STTR FY15 Phase 2 Awards Announced-Includes Hydrogen Production and FCEV Systems March 23, 2015 - 3:37pm Addthis The U.S. Department of Energy has announced the 2015 Small Business Innovation Research and Small Business Technology Transfer (SBIR/STTR) Phase 2 Release 1 Awards, including three Office of Science projects focusing on hydrogen production from electrolysis and

  20. SBIR/STTR Phase I Release 1 Award Winners Announced, Includes Four Hydrogen

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and Fuel Cell Projects | Department of Energy I Release 1 Award Winners Announced, Includes Four Hydrogen and Fuel Cell Projects SBIR/STTR Phase I Release 1 Award Winners Announced, Includes Four Hydrogen and Fuel Cell Projects February 11, 2014 - 12:00am Addthis The U.S. Department of Energy (DOE) recently announced the FY 2014 Small Business Innovation Research and Small Business Technology Transfer (SBIR/STTR) Phase I Release 1 award winners, including four hydrogen and fuel cell projects

  1. SBIR/STTR Phase II Release 1 Award Winners Announced, Includes Two Hydrogen

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and Fuel Cell Projects | Department of Energy II Release 1 Award Winners Announced, Includes Two Hydrogen and Fuel Cell Projects SBIR/STTR Phase II Release 1 Award Winners Announced, Includes Two Hydrogen and Fuel Cell Projects April 23, 2014 - 2:00pm Addthis The U.S. Department of Energy (DOE) recently announced the FY 2014 Small Business Innovation Research and Small Business Technology Transfer (SBIR/STTR) Phase II Release 1 award winners, including two hydrogen and fuel cell projects in

  2. Turbomachine combustor nozzle including a monolithic nozzle component and method of forming the same

    DOEpatents

    Stoia, Lucas John; Melton, Patrick Benedict; Johnson, Thomas Edward; Stevenson, Christian Xavier; Vanselow, John Drake; Westmoreland, James Harold

    2016-02-23

    A turbomachine combustor nozzle includes a monolithic nozzle component having a plate element and a plurality of nozzle elements. Each of the plurality of nozzle elements includes a first end extending from the plate element to a second end. The plate element and plurality of nozzle elements are formed as a unitary component. A plate member is joined with the nozzle component. The plate member includes an outer edge that defines first and second surfaces and a plurality of openings extending between the first and second surfaces. The plurality of openings are configured and disposed to register with and receive the second end of corresponding ones of the plurality of nozzle elements.

  3. Toward Robust Climate Baselining: Objective Assessment of Climate Change Using Widely Distributed Miniaturized Sensors for Accurate World-Wide Geophysical Measurements

    DOE R&D Accomplishments

    Teller, E.; Leith, C.; Canavan, G.; Marion, J.; Wood, L.

    2001-11-13

    A gap-free, world-wide, ocean-, atmosphere-, and land surface-spanning geophysical data-set of three decades time-duration containing the full set of geophysical parameters characterizing global weather is the scientific perquisite for defining the climate; the generally-accepted definition in the meteorological community is that climate is the 30-year running-average of weather. Until such a tridecadal climate baseline exists, climate change discussions inevitably will have a semi-speculative, vs. a purely scientific, character, as the baseline against which changes are referenced will at least somewhat uncertain.

  4. Inducing Order from Disordered Copolymers: On Demand Generation of Triblock Morphologies Including Networks

    SciTech Connect

    Tureau, Maëva S.; Kuan, Wei-Fan; Rong, Lixia; Hsiao, Benjamin S.; Epps, III, Thomas H.

    2015-10-15

    Disordered block copolymers are generally impractical in nanopatterning applications due to their inability to self-assemble into well-defined nanostructures. However, inducing order in low molecular weight disordered systems permits the design of periodic structures with smaller characteristic sizes. Here, we have induced nanoscale phase separation from disordered triblock copolymer melts to form well-ordered lamellae, hexagonally packed cylinders, and a triply periodic gyroid network structure, using a copolymer/homopolymer blending approach, which incorporates constituent homopolymers into selective block domains. This versatile blending approach allows one to precisely target multiple nanostructures from a single disordered material and can be applied to a wide variety of triblock copolymer systems for nanotemplating and nanoscale separation applications requiring nanoscale feature sizes and/or high areal feature densities.

  5. Diffractive laser beam homogenizer including a photo-active material and method of fabricating the same

    DOEpatents

    Bayramian, Andy J; Ebbers, Christopher A; Chen, Diana C

    2014-05-20

    A method of manufacturing a plurality of diffractive optical elements includes providing a partially transmissive slide, providing a first piece of PTR glass, and directing first UV radiation through the partially transmissive slide to impinge on the first piece of PTR glass. The method also includes exposing predetermined portions of the first piece of PTR glass to the first UV radiation and thermally treating the exposed first piece of PTR glass. The method further includes providing a second piece of PTR glass and directing second UV radiation through the thermally treated first piece of PTR glass to impinge on the second piece of PTR glass. The method additionally includes exposing predetermined portions of the second piece of PTR glass to the second UV radiation, thermally treating the exposed second piece of PTR glass, and repeating providing and processing of the second piece of PTR glass using additional pieces of PTR glass.

  6. SBIR/STTR FY15 Release 1 Awards Announced-Includes Fuel Cell...

    Energy Saver

    Release 1 Awards Announced-Includes Fuel Cell Catalyst and Hydrogen Contamination Detection R&D SBIR... DOE's key hydrogen objectives are to reduce the cost of producing and ...

  7. FEMP Expands ESPC ENABLE Program to Include More Energy Conservation Measures

    Energy.gov [DOE]

    The U.S. Department of Energy's Federal Energy Management Program announced the expansion of the Energy Savings Performance Contract ENABLE program to include two new energy conservation measures.

  8. Light reflecting apparatus including a multi-aberration light reflecting surface

    DOEpatents

    Sawicki, Richard H.; Sweatt, William

    1987-01-01

    A light reflecting apparatus including a multi-aberration bendable light reflecting surface is disclosed herein. This apparatus includes a structural assembly comprised of a rectangular plate which is resiliently bendable, to a limited extent, and which has a front side defining the multi-aberration light reflecting surface and an opposite back side, and a plurality of straight leg members rigidly connected with the back side of the plate and extending rearwardly therefrom. The apparatus also includes a number of different adjustment mechanisms, each of which is connected with specific ones of the leg members. These mechanisms are adjustably movable in different ways for applying corresponding forces to the leg members in order to bend the rectangular plate and light reflecting surface into different predetermined curvatures and which specifically include quadratic and cubic curvatures corresponding to different optical aberrations.

  9. A light reflecting apparatus including a multi-aberration light reflecting surface

    DOEpatents

    Sawicki, R.H.; Sweatt, W.

    1985-11-21

    A light reflecting apparatus including a multi-aberration bendable light reflecting surface is disclosed herein. This apparatus includes a structural assembly comprised of a rectangular plate which is resiliently bendable, to a limited extent, and which has a front side defining the multi-aberration light reflecting surface and an opposite back side, and a plurality of straight leg members rigidly connected with the back side of the plate and extending rearwardly therefrom. The apparatus also includes a number of different adjustment mechanisms, each of which is connected with specific ones of the leg members. These mechanisms are adjustably movable in different ways for applying corresponding forces to the leg members in order to bend the rectangular plate and light reflecting surface into different predetermined curvatures and which specifically include quadratic and cubic curvatures corresponding to different optical aberrations.

  10. Electrode assemblies, plasma apparatuses and systems including electrode assemblies, and methods for generating plasma

    DOEpatents

    Kong, Peter C; Grandy, Jon D; Detering, Brent A; Zuck, Larry D

    2013-09-17

    Electrode assemblies for plasma reactors include a structure or device for constraining an arc endpoint to a selected area or region on an electrode. In some embodiments, the structure or device may comprise one or more insulating members covering a portion of an electrode. In additional embodiments, the structure or device may provide a magnetic field configured to control a location of an arc endpoint on the electrode. Plasma generating modules, apparatus, and systems include such electrode assemblies. Methods for generating a plasma include covering at least a portion of a surface of an electrode with an electrically insulating member to constrain a location of an arc endpoint on the electrode. Additional methods for generating a plasma include generating a magnetic field to constrain a location of an arc endpoint on an electrode.

  11. Differential two-body compound nuclear cross section, including the width-fluctuation corrections

    SciTech Connect

    Brown, D.; Herman, M.

    2014-09-02

    We figure out the compound angular differential cross sections, following mainly Fröbrich and Lipperheide, but with the angular momentum couplings that make sense for optical model work. We include the width-fluctuation correction along with calculations.

  12. DOE O 440.1 B, Worker Protection Program for DOE (Including the...

    Energy Saver

    29 CFR 1960. DOE O 440.1B also includes the Department's requirement for overseeing contractor safety and health programs required by 10 CFR 851, Worker Safety and Health Program. ...

  13. Title 40 CFR 1502.14 Alternatives Including the Proposed Action...

    OpenEI (Open Energy Information) [EERE & EIA]

    .14 Alternatives Including the Proposed Action Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Federal RegulationFederal Regulation: Title 40 CFR...

  14. Automated solar collector installation design including ability to define heterogeneous design preferences

    DOEpatents

    Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

    2013-01-08

    Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre-defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives. Embodiments may also include definition of one or more design apertures, each of which may correspond to boundaries in which solar collector layouts should comply with distinct sets of user-defined design preferences. Distinct apertures may provide heterogeneous regions of collector layout according to the user-defined design preferences.

  15. Automated solar collector installation design including ability to define heterogeneous design preferences

    DOEpatents

    Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

    2014-04-29

    Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre -defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives. Embodiments may also include definition of one or more design apertures, each of which may correspond to boundaries in which solar collector layouts should comply with distinct sets of user-defined design preferences. Distinct apertures may provide heterogeneous regions of collector layout according to the user-defined design preferences.

  16. A Roadmap to Success: Hiring, Retaining, and Including People with Disabilities

    Energy.gov [DOE]

    Course Title and Description: “A Roadmap to Success: Hiring, Retaining and Including People with Disabilities” was released by OPM in connection with the 24th anniversary of the Americans with...

  17. Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    NNSA) FEDERAL EMPLOYEES | Department of Energy 40.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES The familiar level of this module is divided into two sections. In the first section, we will discuss the objective, requirements, and the responsibilities assigned to the heads of field elements. In the second section, we will discuss the content of attachment 1, Functional

  18. FY16 SBIR Phase II Release 1 Awards Announced: Includes Hydrogen

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Contaminants Detection, Fuel Cell and Hydrogen Catalysis, and Alkaline Membrane Electrolysis | Department of Energy FY16 SBIR Phase II Release 1 Awards Announced: Includes Hydrogen Contaminants Detection, Fuel Cell and Hydrogen Catalysis, and Alkaline Membrane Electrolysis FY16 SBIR Phase II Release 1 Awards Announced: Includes Hydrogen Contaminants Detection, Fuel Cell and Hydrogen Catalysis, and Alkaline Membrane Electrolysis March 25, 2016 - 10:41am Addthis The Energy Department has

  19. C3E also includes a network of leaders from the public, private, non-profit

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    C3E also includes a network of leaders from the public, private, non-profit, and academic sectors who support advocacy, research, scholarships, hands-on training, funding, and networking opportunities to prepare and inspire young women to enter and thrive in STEM fields. C3E Network participants have pledged many types of commitments, from highlighting female role models to creating hands-on activities for young girls. Ongoing activities include: * Filming and featuring women in clean energy

  20. JLab announces two Spring Science Series events - topics include 'scale of

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    universe' and 'how things work' | Jefferson Lab announces two Spring Science Series events - topics include 'scale of universe' and 'how things work' Jefferson Lab announces two Spring Science Series events - topics include 'scale of universe' and 'how things work' January 19, 2006 Jefferson Lab's 2006 Spring Science Series kicks off at 7 p.m. on Tuesday, Feb. 21, in the CEBAF Center auditorium with astronomer, teacher and author Jeffrey Bennett from the University of Colorado (Boulder)

  1. FY17 SBIR Phase I Release 2 Topics Announced: Includes Fuel Cell Bipolar

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Plates, Hydrogen Delivery, and Emergency Hydrogen Refuelers | Department of Energy FY17 SBIR Phase I Release 2 Topics Announced: Includes Fuel Cell Bipolar Plates, Hydrogen Delivery, and Emergency Hydrogen Refuelers FY17 SBIR Phase I Release 2 Topics Announced: Includes Fuel Cell Bipolar Plates, Hydrogen Delivery, and Emergency Hydrogen Refuelers November 7, 2016 - 1:22pm Addthis The U.S. Department of Energy (DOE) has announced the 2017 Small Business Innovation Research and Small Business

  2. Mapping the footsteps of the green anole: A template for publishing ecological data on the World Wide Web

    SciTech Connect

    Carnes, E.T.; Truett, D.F.; Truett, L.F.

    1996-10-01

    In the handful of years since the World Wide Web (WWW or Web) came into being, Web sites have developed at an astonishing rate. With the influx of Web pages comes a disparity of site types, including personal homepages, commercial sales sites, and educational data. The variety of sites and the deluge of information contained on the Web exemplify the individual nature of the WWW. Whereas some people argue that it is this eclecticism which gives the Web its charm, we propose that sites which are repositories of technical data would benefit from standardization. This paper proffers a methodology for publishing ecological research on the Web. The template we describe uses capabilities of HTML (the HyperText Markup Language) to enhance the value of the traditional scientific paper.

  3. A GIS-assisted approach to wide-area wind resource assessment and site selection for the state of Colorado

    SciTech Connect

    Brower, M.C.; Hurley, P.; Simon, R.

    1996-12-31

    This paper describes the methodology and results of a wide-area wind resource assessment and site selection in Colorado. This was the first phase in a three-part assessment and monitoring program conducted for the State of Colorado Office of Energy Conservation and several collaborating utilities. The objective of this phase was to identify up to 20 candidate sites for evaluation and possible long-term monitoring. This was accomplished using a geographic information system (GIS), which takes into account such factors as topography, existing wind resource data, locations of transmission lines, land cover, and land use. The resulting list of sites recommended for evaluation in Phase 2 of the study includes locations throughout Colorado, but most are in the eastern plains. The GIS wind siting model may be modified and updated in the future as additional information becomes available. 3 figs., 1 tab.

  4. Wide bandgap OPV polymers based on pyridinonedithiophene unit with efficiency >5%

    DOE PAGES [OSTI]

    Schneider, Alexander M.; Lu, Luyao; Manley, Eric F.; Zheng, Tianyue; Sharapov, Valerii; Xu, Tao; Marks, Tobin J.; Chen, Lin X.; Yu, Luping

    2015-06-04

    We report the properties of a new series of wide band gap photovoltaic polymers based on the N-alkyl 2-pyridone dithiophene (PDT) unit. These polymers are effective bulk heterojunction solar cell materials when blended with phenyl-C71-butyric acid methyl ester (PC71BM). They achieve power conversion efficiencies (up to 5.33%) high for polymers having such large bandgaps, ca. 2.0 eV (optical) and 2.5 eV (electrochemical). As a result, grazing incidence wide-angle X-ray scattering (GIWAXS) reveals strong correlations between ?? stacking distance and regularity, polymer backbone planarity, optical absorption maximum energy, and photovoltaic efficiency.

  5. Lesson Learned by Environmental Management Complex-wide Activity-level Work

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Planning and Control | Department of Energy Environmental Management Complex-wide Activity-level Work Planning and Control Lesson Learned by Environmental Management Complex-wide Activity-level Work Planning and Control May 31, 2013 Presenter: Roger M. Claycomb, DOE Idaho Operations Office Topics Covered: EM Headquarters WP&C Oversight EM HQ Participation on Field Office Reviews URS WP&C Standard and EFCOG WP&C Guideline EM HQ Evaluation of Field Office Annual ISMS Declarations

  6. DOE Issues Final Site-Wide Environmental Impact Statement for the Nevada National Security Site

    Energy.gov [DOE]

    The U.S. Department of Energy, National Nuclear Security Administration (NNSA) has issued the Final Site-Wide Environmental Impact Statement (EIS) for the Nevada National Security Site (NNSS) and Off-Site Locations in Nevada. This document presents an analysis of the potential environmental impacts of continued management and operation of the NNSS (formerly known as the Nevada Test Site), the Tonopah Test Range, and two locations in Las Vegas, Nevada. The Site-Wide EIS analyzes reasonably foreseeable missions, programs, capabilities, and projects for a 10-year period.

  7. Fact #822: May 26, 2014 Battery Capacity Varies Widely for Plug-In Vehicles

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy 2: May 26, 2014 Battery Capacity Varies Widely for Plug-In Vehicles Fact #822: May 26, 2014 Battery Capacity Varies Widely for Plug-In Vehicles Battery-electric vehicles have capacities ranging from 12 kilowatt-hours (kWh) in the Scion iQ EV to 85 kWh in the Tesla Model S. Plug-in hybrid-electric vehicles typically have smaller battery capacities than battery-electric vehicles because their range is extended with a gasoline engine. All of these plug-in vehicles

  8. An Atom-Wide Antennae Created from Difference-Making Defects | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy An Atom-Wide Antennae Created from Difference-Making Defects An Atom-Wide Antennae Created from Difference-Making Defects March 7, 2012 - 3:35pm Addthis Take advantage of microwave microscopy, researchers were able to locate graphene islands on graphene. “Point defects” locally enhanced the graphene’s ability to transform waves of light into electronic signals. | Photo courtesy of Oak Ridge National Laboratory. Take advantage of microwave microscopy, researchers were

  9. A widely tunable erbium-doped fiber laser pumped at 532 nm

    SciTech Connect

    Chen, C.Y. ); Choy, M.M.; Andrejco, M.J.; Saifi, M.A.; Lin, C. )

    1990-01-01

    In this paper, the authors report a tunable erbium-doped fiber laser with a very wide continuous-tuning range (1522--1567 nm). The wide tuning range was achieved using an aluminum/erbium-doped fiber; the aluminum co-doping is known to broaden the gain spectrum substantially. The tunable fiber laser has a ring laser configuration consisting of an in-line tunable etalon as the tuning element. Continuous tuning over 45 nm in the spectral range of 1522--1567 nm was achieved with 80 mW of pumping at 532 nm, using the second harmonic of a Nd:YAG laser as the pump source.

  10. Uncertainty Analysis Framework - Hanford Site-Wide Groundwater Flow and Transport Model

    SciTech Connect

    Cole, Charles R.; Bergeron, Marcel P.; Murray, Christopher J.; Thorne, Paul D.; Wurstner, Signe K.; Rogers, Phillip M.

    2001-11-09

    Pacific Northwest National Laboratory (PNNL) embarked on a new initiative to strengthen the technical defensibility of the predictions being made with a site-wide groundwater flow and transport model at the U.S. Department of Energy Hanford Site in southeastern Washington State. In FY 2000, the focus of the initiative was on the characterization of major uncertainties in the current conceptual model that would affect model predictions. The long-term goals of the initiative are the development and implementation of an uncertainty estimation methodology in future assessments and analyses using the site-wide model. This report focuses on the development and implementation of an uncertainty analysis framework.

  11. Off-Cycle Benchmarking of PHEVs; Wide Range of Temperatures and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Aggressive Driving Cycles | Department of Energy Off-Cycle Benchmarking of PHEVs; Wide Range of Temperatures and Aggressive Driving Cycles Off-Cycle Benchmarking of PHEVs; Wide Range of Temperatures and Aggressive Driving Cycles 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C. vss_04_carlson.pdf (1.88 MB) More Documents & Publications AVTA … PHEV Demonstrations and Testing Advanced Vehicle

  12. Find and share global research with new tools at WorldWideScience.org |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information Friday, June 26, 2009 Find and share global research with new tools at WorldWideScience.org You can now quickly hone your research results list to the documents you need and then share them via social networking sites using the new features at WorldWideScience.org. This free online science gateway to global databases now offers clustering of results by publication and author, as well as by topic and date. This enhancement

  13. Find and share global research with new tools at WorldWideScience.org |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information and share global research with new tools at WorldWideScience.org Back to the OSTI News Listing for 2009 You can now quickly hone your research results list to the documents you need and then share them via social networking sites using the new features at WorldWideScience.org. This free online science gateway to global databases now offers clustering of results by publication and author, as well as by topic and date. This

  14. Korean medical research now at WorldWideScience.org | OSTI, US Dept of

    Office of Scientific and Technical Information (OSTI)

    Energy Office of Scientific and Technical Information Korean medical research now at WorldWideScience.org Back to the OSTI News Listing for 2009 KoreaMed, a product similar in scope to PubMed in scope, was recently added to WorldWideScience.org, the one-stop gateway to online global science information. KoreaMed provides access to articles published in Korean medical journals of the Korean Association of Medical Journal Editors (KAMJE). English titles and abstracts are available, along with

  15. Fabrication of contacts for silicon solar cells including printing burn through layers

    SciTech Connect

    Ginley, David S; Kaydanova, Tatiana; Miedaner, Alexander; Curtis, Calvin J; Van Hest, Marinus Franciscus Antonius Maria

    2014-06-24

    A method for fabricating a contact (240) for a solar cell (200). The method includes providing a solar cell substrate (210) with a surface that is covered or includes an antireflective coating (220). For example, the substrate (210) may be positioned adjacent or proximate to an outlet of an inkjet printer (712) or other deposition device. The method continues with forming a burn through layer (230) on the coating (220) by depositing a metal oxide precursor (e.g., using an inkjet or other non-contact printing method to print or apply a volume of liquid or solution containing the precursor). The method includes forming a contact layer (240) comprising silver over or on the burn through layer (230), and then annealing is performed to electrically connect the contact layer (240) to the surface of the solar cell substrate (210) through a portion of the burn through layer (230) and the coating (220).

  16. Force measuring valve assemblies, systems including such valve assemblies and related methods

    DOEpatents

    DeWall, Kevin George; Garcia, Humberto Enrique; McKellar, Michael George

    2012-04-17

    Methods of evaluating a fluid condition may include stroking a valve member and measuring a force acting on the valve member during the stroke. Methods of evaluating a fluid condition may include measuring a force acting on a valve member in the presence of fluid flow over a period of time and evaluating at least one of the frequency of changes in the measured force over the period of time and the magnitude of the changes in the measured force over the period of time to identify the presence of an anomaly in a fluid flow and, optionally, its estimated location. Methods of evaluating a valve condition may include directing a fluid flow through a valve while stroking a valve member, measuring a force acting on the valve member during the stroke, and comparing the measured force to a reference force. Valve assemblies and related systems are also disclosed.

  17. GE Progress Includes 140 Things We Made Yesterday | GE Global Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Progress Includes 140 Things We Made Yesterday Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) GE Progress Includes 140 Things We Made Yesterday Kristen Brosnan 2011.12.12 Hi everybody, I wanted to share a link today to a video that was pulled together at a remarkable pace and was launched last week. To go along with

  18. SWS Online Tool now includes Multifamily Content, plus a How-To Webinar |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy SWS Online Tool now includes Multifamily Content, plus a How-To Webinar SWS Online Tool now includes Multifamily Content, plus a How-To Webinar This announcement contains information on the integration of multifamily content in the SWS Online Tool, and a How-To Webinar on August 27, 2013. mf_content_now_available.pdf (116.96 KB) More Documents & Publications The Standard Work Specifications for Single-Family Home Energy Upgrades are now available€ at your

  19. 2012-02 "Expand the Mission of the NNMCB to Include Advice and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Recommendations on the Evaluation and Use of WIPP" | Department of Energy 2 "Expand the Mission of the NNMCB to Include Advice and Recommendations on the Evaluation and Use of WIPP" 2012-02 "Expand the Mission of the NNMCB to Include Advice and Recommendations on the Evaluation and Use of WIPP" The NNMCAB has a strong interest in the continued use of WIPP for disposal of radioactive wastes that are the legacy of the nuclear weapons program, in particular regarding

  20. Sighting optics including an optical element having a first focal length and a second focal length

    DOEpatents

    Crandall, David Lynn

    2011-08-01

    One embodiment of sighting optics according to the teachings provided herein may include a front sight and a rear sight positioned in spaced-apart relation. The rear sight includes an optical element having a first focal length and a second focal length. The first focal length is selected so that it is about equal to a distance separating the optical element and the front sight and the second focal length is selected so that it is about equal to a target distance. The optical element thus brings into simultaneous focus, for a user, images of the front sight and the target.

  1. Combinatorial evaluation of systems including decomposition of a system representation into fundamental cycles

    DOEpatents

    Oliveira, Joseph S.; Jones-Oliveira, Janet B.; Bailey, Colin G.; Gull, Dean W.

    2008-07-01

    One embodiment of the present invention includes a computer operable to represent a physical system with a graphical data structure corresponding to a matroid. The graphical data structure corresponds to a number of vertices and a number of edges that each correspond to two of the vertices. The computer is further operable to define a closed pathway arrangement with the graphical data structure and identify each different one of a number of fundamental cycles by evaluating a different respective one of the edges with a spanning tree representation. The fundamental cycles each include three or more of the vertices.

  2. USING ORBITAL EFFECTS TO BREAK THE CLOSE/WIDE DEGENERACY IN BINARY-LENS MICROLENSING EVENTS

    SciTech Connect

    Shin, I.-G.; Choi, J. Y.; Han, C.; Sumi, T.; Udalski, A.; Gould, A.; Abe, F.; Furusawa, K.; Itow, Y.; Masuda, K.; Matsubara, Y.; Miyake, N.; Bennett, D. P.; Bond, I. A.; Ling, C. H.; Botzler, C. S.; Freeman, M.; Chote, P.; Harris, P.; Fukui, A.; Collaboration: MOA Collaboration; OGLE Collaboration; and others

    2013-02-10

    Microlensing can provide an important tool to study binaries, especially those composed of faint or dark objects. However, accurate analysis of binary-lens light curves is often hampered by the well-known degeneracy between close (s < 1) and wide (s > 1) binaries, which can be very severe due to an intrinsic symmetry in the lens equation. Here, s is the normalized projected binary separation. In this paper, we propose a method that can resolve the close/wide degeneracy using the effect of a lens orbital motion on lensing light curves. The method is based on the fact that the orbital effect tends to be important for close binaries while it is negligible for wide binaries. We demonstrate the usefulness of the method by applying it to an actually observed binary-lens event MOA-2011-BLG-040/OGLE-2011-BLG-0001, which suffers from severe close/wide degeneracy. From this, we are able to uniquely specify that the lens is composed of K- and M-type dwarfs located {approx}3.5 kpc from the Earth.

  3. Utica Corporation Plant-Wide Energy Assessment Report Final Summary (Entrance to Utica Corporation's Whitesboro Plant)

    SciTech Connect

    2002-03-01

    Utica Corporation conducted a plant-wide energy assessment of the manufacturing processes and utilities at its facility in Whiteboro, NY. As a result of the assessment, the company is now implementing six energy conservation projects that will result in significant cost savings and efficiency improvements.

  4. Plant-wide assessment summary: $4.1 million in savings identified in Paramount Petroleum assessment

    SciTech Connect

    None, None

    2003-08-01

    The Paramount Petroleum Corporation (PPC) and its partners conducted a systematic plant-wide assessment (PWA) to identify energy- and cost-saving opportunities at the company's plant in Paramount, California. The assessment team identified $4.1 million in potential annual savings.

  5. Recommendations on Alternative Analysis in Site-wide NEPA Reviews (1992)

    Energy.gov [DOE]

    The purpose of this memorandum is to recommend the treatment of the proposed action and the no action alternatives in site-wide National Environmental Policy Act reivews that are prepared for continuing and reasonably foreseeable future actions at DOE sites.

  6. DOE Lab-Wide Review of Fermilab May 19-20, 1987

    SciTech Connect

    Green, Dan

    1987-05-01

    This book is submitted as a written adjunct to the Annual DOE Lab-Wide Review of Fermilab, scheduled this year for May 19, 20, 1987. In it are described the functions and activities of the various laboratory areas plus statements of plans and goals for the coming year.

  7. Webinar October 21: Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen and Fuel Cell Applications

    Energy.gov [DOE]

    The Energy Department will present a live webinar titled "Opportunities for Wide Bandgap Semiconductor Power Electronics for Hydrogen and Fuel Cell Applications" on Tuesday, October 21, from 12:00 to 1:00 p.m. Eastern Daylight Time. Representatives of Cree Inc., leading innovators in the WBG electronics industry, will be presenting.

  8. Preface by the CW2014 Organizers-Including Program, Advisory Board, Participants and Photo

    DOE PAGES [OSTI]

    Neudecker, Denise; Kawano, Toshihiko; Talou, Patrick; Chadwick, Mark Benjamin

    2015-01-09

    This issue of the Nuclear Data Sheets contains the proceedings of the 'International Workshop on Nuclear Data Covariances'. This workshop was the third one in a series that started with the 'Workshop on Neutron Cross Section Covariances' (Port Je erson, USA, 2008) and continued with the 'Second Workshop on Neutron Cross Section Covariances' (Vienna, Austria, 2011). The current workshop returned to the US and took place in the center of the beautiful and historic city of Santa Fe, New Mexico, USA from April 28 to May 1, 2014. The purpose of this workshop was to bring together scientists in themore » field of nuclear data evaluation, nuclear reaction theory, reactor physics and associated experiments to review recent developments in nuclear data evaluation methodology as well as assess and discuss open questions regarding uncertainty estimates and associated formatting requirements from the point of view of the experimentalist, the theoretician, the evaluator as well as from application side, e.g. in transport calculations. The workshop was open to contributions on a wide variety of nuclear data observables (cross sections, fission yields, energy and angle spectra, etc.), from the resonance range up to the high energy range as well as for light to heavy elements.« less

  9. Method of preparing a negative electrode including lithium alloy for use within a secondary electrochemical cell

    DOEpatents

    Tomczuk, Zygmunt; Olszanski, Theodore W.; Battles, James E.

    1977-03-08

    A negative electrode that includes a lithium alloy as active material is prepared by briefly submerging a porous, electrically conductive substrate within a melt of the alloy. Prior to solidification, excess melt can be removed by vibrating or otherwise manipulating the filled substrate to expose interstitial surfaces. Electrodes of such as solid lithium-aluminum filled within a substrate of metal foam are provided.

  10. Office of River Protection Looks Back on 2014 Achievements, Including Tank Retrieval Progress

    Office of Energy Efficiency and Renewable Energy (EERE)

    RICHLAND, Wash. – In 2014, EM’s Office of River Protection (ORP) marked several accomplishments at the Hanford site, including continuing efforts to resolve remaining technical issues with the Waste Treatment and Immobilization Plant (WTP); restarting operations of the 242-A Evaporator; establishing waste acceptance limits for WTP; and continuing progress in waste tank retrievals.

  11. Process, including PSA and membrane separation, for separating hydrogen from hydrocarbons

    DOEpatents

    Baker, Richard W.; Lokhandwala, Kaaeid A.; He, Zhenjie; Pinnau, Ingo

    2001-01-01

    An improved process for separating hydrogen from hydrocarbons. The process includes a pressure swing adsorption step, a compression/cooling step and a membrane separation step. The membrane step relies on achieving a methane/hydrogen selectivity of at least about 2.5 under the conditions of the process.

  12. Thermoelectric material including conformal oxide layers and method of making the same using atomic layer deposition

    DOEpatents

    Cho, Jung Young; Ahn, Dongjoon; Salvador, James R.; Meisner, Gregory P.

    2016-06-07

    A thermoelectric material includes a substrate particle and a plurality of conformal oxide layers formed on the substrate particle. The plurality of conformal oxide layers has a total oxide layer thickness ranging from about 2 nm to about 20 nm. The thermoelectric material excludes oxide nanoparticles. A method of making the thermoelectric material is also disclosed herein.

  13. Virginia Senate Approves Budget Deal to Include Money for FEL (Daily Press)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    | Jefferson Lab Virginia Senate Approves Budget Deal to Include Money for FEL (Daily Press) External Link: http://articles.dailypress.com/2012-04-18/news/dp-nws-general-assembly-budget-da... By jlab_admin on Wed, 2012-04-18

  14. Worker Protection Program for DOE (Including the National Nuclear Security Administration) Federal Employees

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2007-05-17

    The Order establishes the framework for an effective worker protection program that will reduce or prevent injuries, illnesses, and accidental losses by providing Department of Energy (DOE), including National Nuclear Security Administration (NNSA), Federal workers with a safe and healthful workplace. Cancels DOE O 440.1A. Certified 6/17/2011. Canceled by DOE O 440.1B Chg 1.

  15. DOE’s Deep Capabilities and Wide Possibilities Highlighted at Executive Summit on Marine and Hydrokinetic Research and Development

    Energy.gov [DOE]

    When it comes to marine and hydrokinetic technology development, the Department of Energy (DOE) offers deep capabilities and wide possibilities.

  16. Thermodynamic analysis of a possible CO{sub 2}-laser plant included in a heat engine cycle

    SciTech Connect

    Bisio, G.; Rubatto, G.

    1998-07-01

    In these last years, several plants have been realized in some industrialized countries to recover pressure exergy from various fluids. That has been done by means of suitable turbines in particular for blast-furnace top gas and natural gas. Various papers have examined the topic, considering pros and cons. High-power CO{sub 2}-lasers are being more and more widely used for welding, drilling and cutting in machine shops. In the near future different kinds of metal surface treatments will probably become routine practice with laser units. The industries benefiting most from high power lasers will be: the automotive industry, shipbuilding, the offshore industry, the aerospace industry, the nuclear and the chemical processing industries. Both degradation and cooling problems may be alleviated by allowing the gas to flow through the laser tube and by reducing its pressure outside this tube. Thus, a thermodynamic analysis on high-power CO{sub 2}-lasers with particular reference to a possible energy recovery is justified. In previous papers the critical examination of the concept of efficiency has led one of the present authors to the definition of an operational domain in which the process can be achieved. This domain is confined by regions of no entropy production (upper limit) and no useful effects (lower limit). On the basis of these concepts and of what has been done for pressure exergy recovery from other fluids, exergy investigations and an analysis of losses are performed for a cyclic process including a high performance CO2 laser. Thermodynamic analysis of flow processes in a CO{sub 2}-laser plant shows that the inclusion of a turbine in this plant allows us to recover the most part of the exergy necessary for the compressor; in addition, the water consumption for the refrigeration in the heat exchanger is reduced.

  17. Design and Analysis of a Region-Wide Remotely Controllable Electrical Lock-Out System

    SciTech Connect

    Olama, Mohammed M; Allgood, Glenn O; Kuruganti, Phani Teja; Howlader, Mostofa; Kisner, Roger A; Ewing, Paul D; McIntyre, Timothy J

    2012-01-01

    configuration and status of electrical system circuits and permit them to lock out customer-owned DG devices for safety purposes using a highly secure and ultra-reliable radio signal. The system consists of: (1) individual personal lockout devices, (2) lockout communications and logic module at circuit breakers, which are located at all DG devices, and (3) a database and configuration control process located at the utility operations center. The lockout system is a close permissive, i.e., loss of control power or communications will cause the circuit breaker to open. Once the DG device is tripped open, a visual means will provide confirmation of a loss of voltage and current that verifies the disconnected status of the DG. Further the utility personnel will be able to place their own lock electronically on the system to ensure a lockout functionally. The proposed LOTO system provides enhanced worker safety and protection against unintended energized lines when DG is present. The main approaches and challenges encountered through designing the proposed region-wide LOTO system are discussed in this paper. These approaches include: (1) evaluating the reliability of the proposed approach under N-modular redundancy with voter/spares configurations and (2) conducting a system level risk assessment study using the failure modes and effects analysis (FMEA) technique to identify and rank failure modes by probability of occurrence, probability of detection, and severity of consequences. This ranking allows a cost benefits analysis to be conducted such that dollars and efforts will be applied to the failures that provide greatest incremental gains in system capability (resilience, survivability, security, reliability, availability, etc.) per dollar spent whether capital, operations, or investment. Several simulation scenarios and their results are presented to demonstrate the viability of these approaches.

  18. Structures including network and topology for identifying, locating and quantifying physical phenomena

    DOEpatents

    Richardson, John G.; Moore, Karen A.; Carrington, Robert A.

    2006-04-25

    A method and system for detecting, locating and quantifying a physical phenomena such as strain or a deformation in a structure. A plurality of laterally adjacent conductors may each include a plurality of segments. Each segment is constructed to exhibit a unit value representative of a defined energy transmission characteristic. A plurality of identity groups are defined with each identity group comprising a plurality of segments including at least one segment from each of the plurality of conductors. The segments contained within an identity group are configured and arranged such that each of their associated unit values may be represented by a concatenated digit string which is a unique number relative to the other identity groups. Additionally, the unit values of the segments within an identity group maintain unique ratios with respect to the other unit values in the identity group.

  19. Universal cell frame for high-pressure water electrolyzer and electrolyzer including the same

    DOEpatents

    Schmitt, Edwin W.; Norman, Timothy J.

    2013-01-08

    Universal cell frame generic for use as an anode frame and as a cathode frame in a water electrolyzer. According to one embodiment, the universal cell frame includes a unitary annular member having a central opening. Four trios of transverse openings are provided in the annular member, each trio being spaced apart by about 90 degrees. A plurality of internal radial passageways fluidly interconnect the central opening and each of the transverse openings of two diametrically-opposed trios of openings, the other two trios of openings lacking corresponding radial passageways. Sealing ribs are provided on the top and bottom surfaces of the annular member. The present invention is also directed at a water electrolyzer that includes two such cell frames, one being used as the anode frame and the other being used as the cathode frame, the cathode frame being rotated 90 degrees relative to the anode frame.

  20. Method for pulse control in a laser including a stimulated brillouin scattering mirror system

    DOEpatents

    Dane, C. Brent; Hackel, Lloyd; Harris, Fritz B.

    2007-10-23

    A laser system, such as a master oscillator/power amplifier system, comprises a gain medium and a stimulated Brillouin scattering SBS mirror system. The SBS mirror system includes an in situ filtered SBS medium that comprises a compound having a small negative non-linear index of refraction, such as a perfluoro compound. An SBS relay telescope having a telescope focal point includes a baffle at the telescope focal point which blocks off angle beams. A beam splitter is placed between the SBS mirror system and the SBS relay telescope, directing a fraction of the beam to an alternate beam path for an alignment fiducial. The SBS mirror system has a collimated SBS cell and a focused SBS cell. An adjustable attenuator is placed between the collimated SBS cell and the focused SBS cell, by which pulse width of the reflected beam can be adjusted.

  1. Hydraulically actuated fuel injector including a pilot operated spool valve assembly and hydraulic system using same

    DOEpatents

    Shafer, Scott F.

    2002-01-01

    The present invention relates to hydraulic systems including hydraulically actuated fuel injectors that have a pilot operated spool valve assembly. One class of hydraulically actuated fuel injectors includes a solenoid driven pilot valve that controls the initiation of the injection event. However, during cold start conditions, hydraulic fluid, typically engine lubricating oil, is particularly viscous and is often difficult to displace through the relatively small drain path that is defined past the pilot valve member. Because the spool valve typically responds slower than expected during cold start due to the difficulty in displacing the relatively viscous oil, accurate start of injection timing can be difficult to achieve. There also exists a greater difficulty in reaching the higher end of the cold operating speed range. Therefore, the present invention utilizes a fluid evacuation valve to aid in displacement of the relatively viscous oil during cold start conditions.

  2. Method and apparatus for controlling a powertrain system including a multi-mode transmission

    DOEpatents

    Hessell, Steven M.; Morris, Robert L.; McGrogan, Sean W.; Heap, Anthony H.; Mendoza, Gil J.

    2015-09-08

    A powertrain including an engine and torque machines is configured to transfer torque through a multi-mode transmission to an output member. A method for controlling the powertrain includes employing a closed-loop speed control system to control torque commands for the torque machines in response to a desired input speed. Upon approaching a power limit of a power storage device transferring power to the torque machines, power limited torque commands are determined for the torque machines in response to the power limit and the closed-loop speed control system is employed to determine an engine torque command in response to the desired input speed and the power limited torque commands for the torque machines.

  3. Cladding material, tube including such cladding material and methods of forming the same

    DOEpatents

    Garnier, John E.; Griffith, George W.

    2016-03-01

    A multi-layered cladding material including a ceramic matrix composite and a metallic material, and a tube formed from the cladding material. The metallic material forms an inner liner of the tube and enables hermetic sealing of thereof. The metallic material at ends of the tube may be exposed and have an increased thickness enabling end cap welding. The metallic material may, optionally, be formed to infiltrate voids in the ceramic matrix composite, the ceramic matrix composite encapsulated by the metallic material. The ceramic matrix composite includes a fiber reinforcement and provides increased mechanical strength, stiffness, thermal shock resistance and high temperature load capacity to the metallic material of the inner liner. The tube may be used as a containment vessel for nuclear fuel used in a nuclear power plant or other reactor. Methods for forming the tube comprising the ceramic matrix composite and the metallic material are also disclosed.

  4. Pipeline including network and topology for identifying, locating and quantifying physical phenomena

    DOEpatents

    Richardson, John G.; Moore, Karen A.; Carrington, Robert A.

    2006-02-14

    A method and system for detecting, locating and quantifying a physical phenomena such as strain or a deformation in a structure. A plurality of laterally adjacent conductors may each include a plurality of segments. Each segment is constructed to exhibit a unit value representative of a defined energy transmission characteristic. A plurality of identity groups are defined with each identity group comprising a plurality of segments including at least one segment from each of the plurality of conductors. The segments contained within an identity group are configured and arranged such that each of their associated unit values may be represented by a concatenated digit string which is a unique number relative to the other identity groups. Additionally, the unit values of the segments within an identity group maintain unique ratios with respect to the other unit values in the identity group.

  5. Photo Library of the Nevada Site Office (Includes historical archive of nuclear testing images)

    DOE Data Explorer

    The Nevada Site Office makes available publicly released photos from their archive that includes photos from both current programs and historical activities. The historical collections include atmospheric and underground nuclear testing photos and photos of other events and people related to the Nevada Test Site. Current collections are focused on homeland security, stockpile stewardship, and environmental management and restoration. See also the Historical Film Library at http://www.nv.doe.gov/library/films/testfilms.aspx and the Current Film Library at http://www.nv.doe.gov/library/films/current.aspx. Current films can be viewed online, but only short clips of the historical films are viewable. They can be ordered via an online request form for a very small shipping and handling fee.

  6. Neutron monitoring systems including gamma thermometers and methods of calibrating nuclear instruments using gamma thermometers

    DOEpatents

    Moen, Stephan Craig; Meyers, Craig Glenn; Petzen, John Alexander; Foard, Adam Muhling

    2012-08-07

    A method of calibrating a nuclear instrument using a gamma thermometer may include: measuring, in the instrument, local neutron flux; generating, from the instrument, a first signal proportional to the neutron flux; measuring, in the gamma thermometer, local gamma flux; generating, from the gamma thermometer, a second signal proportional to the gamma flux; compensating the second signal; and calibrating a gain of the instrument based on the compensated second signal. Compensating the second signal may include: calculating selected yield fractions for specific groups of delayed gamma sources; calculating time constants for the specific groups; calculating a third signal that corresponds to delayed local gamma flux based on the selected yield fractions and time constants; and calculating the compensated second signal by subtracting the third signal from the second signal. The specific groups may have decay time constants greater than 5.times.10.sup.-1 seconds and less than 5.times.10.sup.5 seconds.

  7. Microwave-emitting rotor, separator apparatus including same, methods of operation and design thereof

    DOEpatents

    Meikrantz, David H.

    2006-12-19

    An apparatus for use in separating, at least in part, a mixture, including at least one chamber and at least one microwave generation device configured for communicating microwave energy into the at least one chamber is disclosed. The rotor assembly may comprise an electric generator for generating electricity for operating the microwave generation device. At least one microwave generation device may be positioned within a tubular interior shaft extending within the rotor assembly. At least a portion of the tubular interior shaft may be substantially transparent to microwave energy. Microwave energy may be emitted in an outward radial direction or toward an anticipated boundary surface defined between a mixture and a separated constituent thereof. A method including flowing a mixture through at least one chamber and communicating microwave energy into the at least one chamber while rotating same is disclosed. Methods of operating a centrifugal separator and design thereof are disclosed.

  8. Certification and Accreditation Process for Information Systems Including National Security Systems

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2004-02-19

    The Notice ensures the effectiveness of security controls on DOE Federal information systems including national security systems. The Notice will also ensure compliance with the requirements of DOE O 205.1, Department of Energy Cyber Security Management Program, dated 3-21-03, and protect DOE information and information systems from unauthorized access, use, disclosure, modification, or destruction. No cancellations. DOE N 205.15, dated 3-18-05, extends this directive until 3-18-06.

  9. Request for Comments on Including Onsite Renewable Energy Generation under Energy Savings Performance Contracts

    Energy.gov [DOE]

    The U.S. Department of Energy's Federal Energy Management Program (FEMP) released this Request for Comments on February 1, 2016, in an effort to obtain information about potential obstacles associated with the implementation of onsite renewable energy generation projects under the federal Energy Savings Performance Contract (ESPC) Authority, including potential issues with regard to project eligibility for the federal solar investment tax credit and the use of the ESPC ENABLE program for such projects.

  10. Laboratory Curiosity rover ChemCam team, including Los Alamos National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    first analyses yield beautiful results August 23, 2012 Curiosity beams back strong, clear data from 'scour' area on Martian surface LOS ALAMOS, NEW MEXICO, August 23, 2012-Members of the Mars Science Laboratory Curiosity rover ChemCam team, including Los Alamos National Laboratory scientists, squeezed in a little extra target practice after zapping the first fist-sized rock that was placed in the laser's crosshairs last weekend.Much to the delight of - 2 - the scientific team, the laser

  11. Method of preparing a negative electrode including lithium alloy for use within a secondary electrochemical cell

    DOEpatents

    Tomczuk, Z.; Olszanski, W.; Battles, J.E.

    1975-12-09

    A negative electrode that includes a lithium alloy as active material is prepared by briefly submerging a porous, electrically conductive substrate within a melt of the alloy. Prior to solidification, excess melt can be removed by vibrating or otherwise manipulating the filled substrate to expose interstitial surfaces. Electrodes of such a solid lithium--aluminum filled within a substrate of metal foam are provided. 1 figure, 1 table.

  12. " Row: End Uses;" " Column: Energy Sources, including Net Electricity;"

    Energy Information Administration (EIA) (indexed site)

    1. End Uses of Fuel Consumption, 1998;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Physical Units or Btu." " "," ",," ","Distillate"," "," ","Coal"," "," " " ",,,,"Fuel Oil",,,"(excluding Coal" " ","

  13. " Row: End Uses;" " Column: Energy Sources, including Net Electricity;"

    Energy Information Administration (EIA) (indexed site)

    2. End Uses of Fuel Consumption, 1998;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Trillion Btu." " "," ",," ","Distillate"," "," ",," "," " " ",,,,"Fuel Oil",,,"Coal",,"RSE" " ","

  14. " Row: End Uses;" " Column: Energy Sources, including Net Electricity;"

    Energy Information Administration (EIA) (indexed site)

    5 End Uses of Fuel Consumption, 2002;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Physical Units or Btu." " "," ",," ","Distillate"," "," ",," "," " " ",,,,"Fuel Oil",,,"Coal" " ","

  15. " Row: End Uses;" " Column: Energy Sources, including Net Electricity;"

    Energy Information Administration (EIA) (indexed site)

    6 End Uses of Fuel Consumption, 2002;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Trillion Btu." " "," ",," ","Distillate"," "," ",," "," " " ",,,,"Fuel Oil",,,"Coal",,"RSE" " ","

  16. " Row: End Uses;" " Column: Energy Sources, including Net Electricity;"

    Energy Information Administration (EIA) (indexed site)

    5 End Uses of Fuel Consumption, 2006;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Physical Units or Btu." " "," ",," ","Distillate"," "," ","Coal"," " " ",,,,"Fuel Oil",,,"(excluding Coal" " ","

  17. " Row: End Uses;" " Column: Energy Sources, including Net Electricity;"

    Energy Information Administration (EIA) (indexed site)

    5 End Uses of Fuel Consumption, 2010;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Physical Units or Btu." " "," ",," ","Distillate"," "," ","Coal"," " " ",,,,"Fuel Oil",,,"(excluding Coal" " ","

  18. Method and apparatus for identifying, locating and quantifying physical phenomena and structure including same

    DOEpatents

    Richardson, John G.

    2006-01-24

    A method and system for detecting, locating and quantifying a physical phenomena such as strain or a deformation in a structure. A minimum resolvable distance along the structure is selected and a quantity of laterally adjacent conductors is determined. Each conductor includes a plurality of segments coupled in series which define the minimum resolvable distance along the structure. When a deformation occurs, changes in the defined energy transmission characteristics along each conductor are compared to determine which segment contains the deformation.

  19. SWS Online Tool now includes Multifamily Content, plus a How-To Webinar

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Multifamily Housing Content Now Available via the Standard Work Specifications Online Tool The National Renewable Energy Laboratory, along with the U.S. Department of Energy (DOE), are pleased to announce that the Standard Work Specifications (SWS) for Multifamily Housing Energy Upgrades are now incorporated within the SWS Online Tool. In addition to this content, the tool also now includes: Explore the Standard Work Specifications Online Tool. An interactive glossary Basic Quality Control

  20. Cesium and strontium extraction using a mixed extractant solvent including crown ether and calixarene extractants

    DOEpatents

    Meikrantz, David H.; Todd, Terry A.; Riddle, Catherine L.; Law, Jack D.; Peterman, Dean R.; Mincher, Bruce J.; McGrath, Christopher A.; Baker, John D.

    2007-11-06

    A mixed extractant solvent including calix[4]arene-bis-(tert-octylbenzo)-crown-6 ("BOBCalixC6"), 4',4',(5')-di-(t-butyldicyclo-hexano)-18-crown-6 ("DtBu18C6"), and at least one modifier dissolved in a diluent. The mixed extractant solvent may be used to remove cesium and strontium from an acidic solution. The DtBu18C6 may be present from approximately 0.01 M to approximately 0.4M, such as from approximately 0.086 M to approximately 0.108 M. The modifier may be 1-(2,2,3,3-tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol ("Cs-7SB") and may be present from approximately 0.01M to approximately 0.8M. In one embodiment, the mixed extractant solvent includes approximately 0.15M DtBu18C6, approximately 0.007M BOBCalixC6, and approximately 0.75M Cs-7SB modifier dissolved in an isoparaffinic hydrocarbon diluent. The mixed extractant solvent may form an organic phase in an extraction system that also includes an aqueous phase. Methods of extracting cesium and strontium as well as strontium alone are also disclosed.