National Library of Energy BETA

Sample records for valero western refining

  1. Valero Refining Company - NJ | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    EIA-861 Final Data File for 2010 - File1a1 EIA Form 861 Data Utility Id 56325 Utility Location Yes Ownership R Operates Generating Plant Yes Activity Retail Marketing Yes This...

  2. Aspects of Western Refining, Inc.'s Proposed Acquisition of Giant Industries, Inc.

    Reports and Publications

    2006-01-01

    Presentation of company-level, non-proprietary data and relevant aggregate data for U.S. refinery capacity and gasoline marketing of Western Refining and Giant Industries to inform discussions of Western Refining Inc.'s proposed acquisition of Giant Industries Inc. for a total of $1.5 billion, which was announced August 28, 2006.

  3. Instrument Development F.P.J. Valero P. Pilewskie NASA Ames Research Center

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    F.P.J. Valero P. Pilewskie NASA Ames Research Center Moffett Field, CA 94035-1000 Radiative proces,ses in the atmosphere are at the heart of anthropogenically induced climatic changes. High quality measurements of radiative parameters must be obtained to be able to characterize the way in which the interaction of radiation with the atmosphere results in climatic change and evolution. With the goal of contributing to the above objective we are developing state-of-the-art radiation measuring

  4. Refining of fossil resin flotation concentrate from western coal. Final report

    SciTech Connect (OSTI)

    Jensen, G.F.; Miller, J.D.

    1995-02-16

    During the past several years, significant research efforts have been made to develop process technology for the selective flotation of fossil resin from western coals. As a result of these efforts, several new flotation technologies have been developed. Operation of a proof-of-concept continuous flotation circuit showed the selective flotation process to be sufficiently profitable to justify the development of a fossil resin industry. However, little attention has been given to the refining of the fossil resin flotation concentrate although solvent refining is a critical step for the fossil resin to become a marketable product. In view of this situation, DOE funded this two-year project to evaluate the following aspects of the fossil resin refining technology: 1) Characterization of the fossil resin flotation concentrate and its refined products; 2) Kinetics of fossil resin extraction; 3) Effects of operating variables on solvent extraction; 4) Extraction solvents; 5) Proof-of-concept continuous refining tests; and 6) Technical and economic analysis. The results from this research effort have led to the following conclusions: Hexane- or heptane-refined fossil resin has a light-yellow color, a melting point of 140 - 142{degrees}C, a density of 1.034 gram/cm, and good solubility in nonpolar solvents. Among the four solvents evaluated (hexane, heptane, toluene and ethyl acetate), hexane is the most appropriate solvent based on overall technical and economic considerations. Batch extraction tests and kinetic studies suggest that the main interaction between the resin and the solvent is expected to be the forces associated with solvation phenomena. Temperature has the most significant effect on extraction rate. With hexane as the solvent, a recovery of 90% cam be achieved at 50{degrees}C and 10% solids concentration with moderate agitation for 1 hour.

  5. Rietveld Refinement

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    profile Chi-squared value 4.944 Progress so far Inverse Modeling Method 2 Fourier Method Data Model Refined Structure 40 60 80 100 120 140 160 0 1000 2000 3000 4000...

  6. Refiner Crude Oil Inputs

    U.S. Energy Information Administration (EIA) (indexed site)

    Net Inputs (Refiner and Blender) of RBOB Blending Components Net Inputs (Refiner and Blender) of CBOB Blending Components Net Inputs (Refiner and Blender) of GTAB Blending ...

  7. ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining Processes |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Bandwidth for Petroleum Refining Processes ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining Processes bandwidth.pdf (1.16 MB) More Documents & Publications ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining Processes Bandwidth Study U.S. Petroleum Refining ITP Petroleum Refining: Energy and Environmental Profile of the U.S. Petroleum Refining Industry (November 2007) ITP Petroleum Refining: Profile of the Petroleum Refining Industry in

  8. Refines Efficiency Improvement

    SciTech Connect (OSTI)

    WRI

    2002-05-15

    Refinery processes that convert heavy oils to lighter distillate fuels require heating for distillation, hydrogen addition or carbon rejection (coking). Efficiency is limited by the formation of insoluble carbon-rich coke deposits. Heat exchangers and other refinery units must be shut down for mechanical coke removal, resulting in a significant loss of output and revenue. When a residuum is heated above the temperature at which pyrolysis occurs (340 C, 650 F), there is typically an induction period before coke formation begins (Magaril and Aksenova 1968, Wiehe 1993). To avoid fouling, refiners often stop heating a residuum before coke formation begins, using arbitrary criteria. In many cases, this heating is stopped sooner than need be, resulting in less than maximum product yield. Western Research Institute (WRI) has developed innovative Coking Index concepts (patent pending) which can be used for process control by refiners to heat residua to the threshold, but not beyond the point at which coke formation begins when petroleum residua materials are heated at pyrolysis temperatures (Schabron et al. 2001). The development of this universal predictor solves a long standing problem in petroleum refining. These Coking Indexes have great potential value in improving the efficiency of distillation processes. The Coking Indexes were found to apply to residua in a universal manner, and the theoretical basis for the indexes has been established (Schabron et al. 2001a, 2001b, 2001c). For the first time, a few simple measurements indicates how close undesired coke formation is on the coke formation induction time line. The Coking Indexes can lead to new process controls that can improve refinery distillation efficiency by several percentage points. Petroleum residua consist of an ordered continuum of solvated polar materials usually referred to as asphaltenes dispersed in a lower polarity solvent phase held together by intermediate polarity materials usually referred to as

  9. ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bandwidth for Petroleum Refining Processes ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining Processes bandwidth.pdf (1.16 MB) More Documents & Publications ITP ...

  10. ITP Petroleum Refining: Profile of the Petroleum Refining Industry...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Profile of the Petroleum Refining Industry in California: California Industries of the Future Program ITP Petroleum Refining: Profile of the Petroleum Refining Industry in ...

  11. Step 3: Project Refinement

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3: Project Refinement 2 1 Potential 3 Refinement 4 Implementation 5 Operations & Maintenance 2 Options 3 Refinement 1/28/2016 2 3 FUNDING AND FINANCING OPTIONS Project Ownership Financing structure is highly dependent on size of the project and the capital available for a given project: * Tribe owns the project (cash purchase or debt) * Tribe hosts the project and buys the electricity (power purchase agreement) * Tribe partners with private sector and co-owns the project (uncertainties about

  12. Refiners trade hydroprocessing experience

    SciTech Connect (OSTI)

    Not Available

    1984-04-16

    Hydrogen treating and conversion processes less severe than hydrocracking abound in most refineries and therefore were a subject of high interest at the National Petroleum Refiners Association question and answer session on refining technology. The present paper, which is the second abstract of the transcript of the most recent meeting, covers hydroprocessing and some of its mechanical, process, and catalytic aspects.

  13. NAFTA opportunities: Petroleum refining

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The North American Free Trade Agreement (NAFTA) creates a more transparent environment for the sale of refined petroleum products to Mexico, and locks in access to Canada's relatively open market for these products. Canada and Mexico are sizable United States export markets for refined petroleum products, with exports of $556 million and $864 million, respectively, in 1992. These markets represent approximately 24 percent of total U.S. exports of these goods.

  14. ITP Petroleum Refining: Profile of the Petroleum Refining Industry in

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    California: California Industries of the Future Program | Department of Energy Profile of the Petroleum Refining Industry in California: California Industries of the Future Program ITP Petroleum Refining: Profile of the Petroleum Refining Industry in California: California Industries of the Future Program cpi_profile.pdf (363.14 KB) More Documents & Publications ITP Petroleum Refining: Energy and Environmental Profile of the U.S. Petroleum Refining Industry (November 2007) ITP Petroleum

  15. Focus on Venezuelan heavy crude: refining margins

    SciTech Connect (OSTI)

    Not Available

    1984-01-25

    Of six crudes refined in the US Gulf Coast, heavy Venezuelan crude Lagunillas (15/sup 0/ API) provides the best margin per barrel. Data for end of December 1983 and the first three weeks of January show that margins on all crudes are on the rise in this market, due to a turnaround in product prices. The lighter crudes are showing the greatest increase in Gross Product Worth. This is having a modest shrinking effect on the margin differential between light and heavy crudes in this market. The domestic crude West Texas Intermediate, at 40/sup 0/ API, provides the highest GPW in this crude slate sample, over US $31 per barrel, compared to GPW of under US $28 per barrel for Lagunillas. Still, as Lagunillas cost about US $8 less than does WTI, refiners with sufficient residue conversion capacity can be earning about US $3.50 more in margin per barrel than they can with WTI. Although few refiners would be using a 15/sup 0/ API crude exclusively for any length of time, heavier oil's inclusion in modern refiners' diets is enhancing their competitive position more than any other single factor. This issue of Energy Detente presents the fuel price/tax series and industrial fuel prices for January 1984 for countries of the Western Hemisphere.

  16. Petroleum Refining | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Petroleum Refining Petroleum Refining Maintaining the viability of the U.S. petroleum refining industry requires continuous improvement in productivity and energy efficiency. The U.S. refining industry has worked with AMO to provide a range of resources that can provide energy and cost savings for the industry. Analytical Studies & Other Publications Manufacturing Energy and Carbon Footprints provide a mapping of energy use, energy loss, and carbon emissions for selected industry sectors.

  17. Minimally refined biomass fuel

    DOE Patents [OSTI]

    Pearson, Richard K.; Hirschfeld, Tomas B.

    1984-01-01

    A minimally refined fluid composition, suitable as a fuel mixture and derived from biomass material, is comprised of one or more water-soluble carbohydrates such as sucrose, one or more alcohols having less than four carbons, and water. The carbohydrate provides the fuel source; water solubilizes the carbohydrates; and the alcohol aids in the combustion of the carbohydrate and reduces the vicosity of the carbohydrate/water solution. Because less energy is required to obtain the carbohydrate from the raw biomass than alcohol, an overall energy savings is realized compared to fuels employing alcohol as the primary fuel.

  18. CLAMR (Compute Language Adaptive Mesh Refinement)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    CLAMR (Compute Language Adaptive Mesh Refinement) CLAMR (Compute Language Adaptive Mesh Refinement) CLAMR (Compute Language Adaptive Mesh Refinement) is being developed as a DOE...

  19. ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bandwidth for Petroleum Refining Processes Prepared by Energetics Incorporated for the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Industrial ...

  20. Midcourse Refinements of Financing Strategies

    Energy.gov [DOE]

    Better Buildings Neighborhood Program Financing Peer Exchange Call: Midcourse Refinements of Financing Strategies, Call Slides and Discussion Summary, March 29, 2012. During this webinar participants discussed how programs have adapted and refined their financing strategies based on initial implementation experience and learning.

  1. Crystal structure refinement with SHELXL

    SciTech Connect (OSTI)

    Sheldrick, George M., E-mail: gsheldr@shelx.uni-ac.gwdg.de [Department of Structural Chemistry, Georg-August Universitt Gttingen, Tammannstrae 4, Gttingen 37077 (Germany)

    2015-01-01

    New features added to the refinement program SHELXL since 2008 are described and explained. The improvements in the crystal structure refinement program SHELXL have been closely coupled with the development and increasing importance of the CIF (Crystallographic Information Framework) format for validating and archiving crystal structures. An important simplification is that now only one file in CIF format (for convenience, referred to simply as a CIF) containing embedded reflection data and SHELXL instructions is needed for a complete structure archive; the program SHREDCIF can be used to extract the .hkl and .ins files required for further refinement with SHELXL. Recent developments in SHELXL facilitate refinement against neutron diffraction data, the treatment of H atoms, the determination of absolute structure, the input of partial structure factors and the refinement of twinned and disordered structures. SHELXL is available free to academics for the Windows, Linux and Mac OS X operating systems, and is particularly suitable for multiple-core processors.

  2. Parallel Adaptive Mesh Refinement

    SciTech Connect (OSTI)

    Diachin, L; Hornung, R; Plassmann, P; WIssink, A

    2005-03-04

    As large-scale, parallel computers have become more widely available and numerical models and algorithms have advanced, the range of physical phenomena that can be simulated has expanded dramatically. Many important science and engineering problems exhibit solutions with localized behavior where highly-detailed salient features or large gradients appear in certain regions which are separated by much larger regions where the solution is smooth. Examples include chemically-reacting flows with radiative heat transfer, high Reynolds number flows interacting with solid objects, and combustion problems where the flame front is essentially a two-dimensional sheet occupying a small part of a three-dimensional domain. Modeling such problems numerically requires approximating the governing partial differential equations on a discrete domain, or grid. Grid spacing is an important factor in determining the accuracy and cost of a computation. A fine grid may be needed to resolve key local features while a much coarser grid may suffice elsewhere. Employing a fine grid everywhere may be inefficient at best and, at worst, may make an adequately resolved simulation impractical. Moreover, the location and resolution of fine grid required for an accurate solution is a dynamic property of a problem's transient features and may not be known a priori. Adaptive mesh refinement (AMR) is a technique that can be used with both structured and unstructured meshes to adjust local grid spacing dynamically to capture solution features with an appropriate degree of resolution. Thus, computational resources can be focused where and when they are needed most to efficiently achieve an accurate solution without incurring the cost of a globally-fine grid. Figure 1.1 shows two example computations using AMR; on the left is a structured mesh calculation of a impulsively-sheared contact surface and on the right is the fuselage and volume discretization of an RAH-66 Comanche helicopter [35]. Note the

  3. MECS 2006 - Petroleum Refining | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Petroleum Refining MECS 2006 - Petroleum Refining Manufacturing Energy and Carbon Footprint for Petroleum Refining (NAICS 324110) Sector with Total Energy Input, October 2012 (MECS 2006) All available footprints and supporting documents Manufacturing Energy and Carbon Footprint Petroleum Refining (123.98 KB) More Documents & Publications Petroleum Refining (2010 MECS) MECS 2006 - Alumina and Aluminum MECS 2006 - Cement

  4. Presentation title: This can be up to 2 lines

    Gasoline and Diesel Fuel Update

    Genealogy of major U.S. refiners 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 Amoco SOHIO BP ARCO Mapco Williams Clark Refining 1/89 12/98 4/00 3/98 Orion Diamond Shamrock Ultramar k 12/96 7/03 Ultramar Diamond Shamrock (UDS) Total North America UDS 9/97 Valero Salomon (Basis) Valero Williams BP BP b BP-Husky Refining LLC (jv) Husky Huntway 5/97 6/01 9/05 Valero Premcor g Valero Valero Valero 12/01 7/94 e 12/98 f Carlyle Group y Coastal 3/03 d 12/88 a 6/01 o Sun Company

  5. Electronic structure of superconductivity refined

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Electronic structure of superconductivity refined Electronic structure of superconductivity refined A team of physicists propose a new model that expands on a little understood aspect of the electronic structure in high-temperature superconductors. July 10, 2008 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma

  6. Renewable Energy Financial Instruments Guidance Tool (REFINe...

    Open Energy Information (Open El) [EERE & EIA]

    Guidance Tool (REFINe) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Financial Instruments Guidance Tool (REFINe) Focus Area: Renewable Energy...

  7. ,"U.S. Refiner Petroleum Product Prices"

    U.S. Energy Information Administration (EIA) (indexed site)

    ...AEPPRLPTGNUSDPG","EMAEPPRHPTGNUSDPG" "Date","U.S. Total Gasoline Retail Sales by Refiners (Dollars per Gallon)","U.S. Aviation Gasoline Retail Sales by Refiners (Dollars ...

  8. Petroleum Refining (2010 MECS) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Petroleum Refining (2010 MECS) Petroleum Refining (2010 MECS) Manufacturing Energy and Carbon Footprint for Petroleum Refining Sector (NAICS 324110) Energy use data source: 2010 EIA MECS (with adjustments) Footprint Last Revised: February 2014 View footprints for other sectors here. Manufacturing Energy and Carbon Footprint Petroleum Refining (125.36 KB) More Documents & Publications MECS 2006 - Petroleum Refining Cement (2010 MECS) Forest Products (2010 MECS) Manufacturing Energy Sankey

  9. GRAIN REFINEMENT OF URANIUM BILLETS

    DOE Patents [OSTI]

    Lewis, L.

    1964-02-25

    A method of refining the grain structure of massive uranium billets without resort to forging is described. The method consists in the steps of beta- quenching the billets, annealing the quenched billets in the upper alpha temperature range, and extrusion upset of the billets to an extent sufficient to increase the cross sectional area by at least 5 per cent. (AEC)

  10. Method for refining contaminated iridium

    DOE Patents [OSTI]

    Heshmatpour, B.; Heestand, R.L.

    1982-08-31

    Contaminated iridium is refined by alloying it with an alloying agent selected from the group consisting of manganese and an alloy of manganese and copper, and then dissolving the alloying agent from the formed alloy to provide a purified iridium powder.

  11. Reformulated Gasoline Market Affected Refiners Differently, 1995

    Reports and Publications

    1996-01-01

    This article focuses on the costs of producing reformulated gasoline (RFG) as experienced by different types of refiners and on how these refiners fared this past summer, given the prices for RFG at the refinery gate.

  12. Firing of pulverized solvent refined coal

    DOE Patents [OSTI]

    Derbidge, T. Craig; Mulholland, James A.; Foster, Edward P.

    1986-01-01

    An air-purged burner for the firing of pulverized solvent refined coal is constructed and operated such that the solvent refined coal can be fired without the coking thereof on the burner components. The air-purged burner is designed for the firing of pulverized solvent refined coal in a tangentially fired boiler.

  13. ITP Petroleum Refining: Energy and Environmental Profile of the...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and Environmental Profile of the U.S. Petroleum Refining Industry (November 2007) ITP Petroleum Refining: Energy and Environmental Profile of the U.S. Petroleum Refining Industry ...

  14. Improving the accuracy of macromolecular structure refinement

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    is challenging at low resolution. We compared refinement methods using synchrotron diffraction data of photosystem I at 7.4 resolution, starting from different initial models...

  15. Refiners Increasingly Employing Catalyst Regeneration as Alternative...

    Open Energy Information (Open El) [EERE & EIA]

    million by the end of 2019. Refiners Benefit from Catalyst Regeneration Technology via Price Reductions and Lower Maintenance Costs The catalyst regeneration technology is the...

  16. Right rock: Finding/refining customer expectations

    SciTech Connect (OSTI)

    Ashby, R.

    1997-11-01

    This report contains viewgraphs on methods of finding customer expectations of software and then refining the documentation and software to fit these expectations.

  17. Midcourse Refinements of Financing Strategies | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    March 29, 2012. During this webinar participants discussed how programs have adapted and refined their financing strategies based on initial implementation experience and learning. ...

  18. Pneumatic conveying of pulverized solvent refined coal

    DOE Patents [OSTI]

    Lennon, Dennis R.

    1984-11-06

    A method for pneumatically conveying solvent refined coal to a burner under conditions of dilute phase pneumatic flow so as to prevent saltation of the solvent refined coal in the transport line by maintaining the transport fluid velocity above approximately 95 ft/sec.

  19. North Dakota Refining Capacity Study

    SciTech Connect (OSTI)

    Dennis Hill; Kurt Swenson; Carl Tuura; Jim Simon; Robert Vermette; Gilberto Marcha; Steve Kelly; David Wells; Ed Palmer; Kuo Yu; Tram Nguyen; Juliam Migliavacca

    2011-01-05

    According to a 2008 report issued by the United States Geological Survey, North Dakota and Montana have an estimated 3.0 to 4.3 billion barrels of undiscovered, technically recoverable oil in an area known as the Bakken Formation. With the size and remoteness of the discovery, the question became 'can a business case be made for increasing refining capacity in North Dakota?' And, if so what is the impact to existing players in the region. To answer the question, a study committee comprised of leaders in the region's petroleum industry were brought together to define the scope of the study, hire a consulting firm and oversee the study. The study committee met frequently to provide input on the findings and modify the course of the study, as needed. The study concluded that the Petroleum Area Defense District II (PADD II) has an oversupply of gasoline. With that in mind, a niche market, naphtha, was identified. Naphtha is used as a diluent used for pipelining the bitumen (heavy crude) from Canada to crude markets. The study predicted there will continue to be an increase in the demand for naphtha through 2030. The study estimated the optimal configuration for the refinery at 34,000 barrels per day (BPD) producing 15,000 BPD of naphtha and a 52 percent refinery charge for jet and diesel yield. The financial modeling assumed the sponsor of a refinery would invest its own capital to pay for construction costs. With this assumption, the internal rate of return is 9.2 percent which is not sufficient to attract traditional investment given the risk factor of the project. With that in mind, those interested in pursuing this niche market will need to identify incentives to improve the rate of return.

  20. Firing of pulverized solvent refined coal

    DOE Patents [OSTI]

    Lennon, Dennis R.; Snedden, Richard B.; Foster, Edward P.; Bellas, George T.

    1990-05-15

    A burner for the firing of pulverized solvent refined coal is constructed and operated such that the solvent refined coal can be fired successfully without any performance limitations and without the coking of the solvent refined coal on the burner components. The burner is provided with a tangential inlet of primary air and pulverized fuel, a vaned diffusion swirler for the mixture of primary air and fuel, a center water-cooled conical diffuser shielding the incoming fuel from the heat radiation from the flame and deflecting the primary air and fuel steam into the secondary air, and a watercooled annulus located between the primary air and secondary air flows.

  1. U.S. Refining Capacity Utilization

    Reports and Publications

    1995-01-01

    This article briefly reviews recent trends in domestic refining capacity utilization and examines in detail the differences in reported crude oil distillation capacities and utilization rates among different classes of refineries.

  2. Hydrogen Piping Experience in Chevron Refining

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Piping Experience in Chevron Refining Ned Niccolls Materials Engineer Chevron Energy Technology Company Hydrogen Pipeline Working Group Workshop August 30-31, 2005 Outline 2 Overall perspectives from long term use of hydrogen piping in refining. Piping specifications and practices. The (few) problem areas. Related industry work: American Petroleum Institute corrosion and materials work on high temperature hydrogen attack. Overall Perspectives 3 Few problems with hydrogen piping operating at

  3. Refining Bio-Oil alongside Petroleum | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Refining Bio-Oil alongside Petroleum Refining Bio-Oil alongside Petroleum April 9, 2013 - 12:00am Addthis W.R. Grace, a leading provider of refining technologies, and Pacific ...

  4. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    Motor Gasoline No. 2 Distillate Residual Fuel Oil 5. U.S. Refiner Wholesale Petroleum Product Volumes Figure Percentages of Refiner Wholesale Volumes 1995 Annual Averages Motor...

  5. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    Day Motor Gasoline No. 2 Distillate Residual Fuel Oil 3. U.S. Refiner Retail Petroleum Product Volumes Figure Percentages of Refiner Retail Volumes 1997 Annual Averages Motor...

  6. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    Motor Gasoline No. 2 Distillate Residual Fuel Oil 5. U.S. Refiner Wholesale Petroleum Product Volumes Figure Percentages of Refiner Wholesale Volumes 1997 Annual Averages Motor...

  7. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    Day Motor Gasoline No. 2 Distillate Residual Fuel Oil 3. U.S. Refiner Retail Petroleum Product Volumes Figure Percentages of Refiner Retail Volumes 1995 Annual Averages Motor...

  8. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    Day Motor Gasoline No. 2 Distillate Residual Fuel Oil 3. U.S. Refiner Retail Petroleum Product Volumes Figure Percentages of Refiner Retail Volumes 1996 Annual Averages Motor...

  9. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    Motor Gasoline No. 2 Distillate Residual Fuel Oil 5. U.S. Refiner Wholesale Petroleum Product Volumes Figure Percentages of Refiner Wholesale Volumes 1996 Annual Averages Motor...

  10. ,"Aviation Gasoline Sales to End Users Refiner Sales Volumes...

    U.S. Energy Information Administration (EIA) (indexed site)

    Aviation Gasoline Sales to End Users Refiner Sales Volumes" ,"Click worksheet name or tab ... Data for" ,"Data 1","Aviation Gasoline Sales to End Users Refiner ...

  11. ,"U.S. Motor Gasoline Refiner Sales Volumes"

    U.S. Energy Information Administration (EIA) (indexed site)

    Data for" ,"Data 1","U.S. Motor Gasoline Refiner Sales ... AM" "Back to Contents","Data 1: U.S. Motor Gasoline Refiner Sales Volumes" ...

  12. ITP Petroleum Refining: Impacts of Condition Assessment on Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Impacts of Condition Assessment on Energy Use: Selected Applications in Chemicals Processing and Petroleum Refining ITP Petroleum Refining: Impacts of Condition Assessment on ...

  13. Parallel tetrahedral mesh refinement with MOAB.

    SciTech Connect (OSTI)

    Thompson, David C.; Pebay, Philippe Pierre

    2008-12-01

    In this report, we present the novel functionality of parallel tetrahedral mesh refinement which we have implemented in MOAB. This report details work done to implement parallel, edge-based, tetrahedral refinement into MOAB. The theoretical basis for this work is contained in [PT04, PT05, TP06] while information on design, performance, and operation specific to MOAB are contained herein. As MOAB is intended mainly for use in pre-processing and simulation (as opposed to the post-processing bent of previous papers), the primary use case is different: rather than refining elements with non-linear basis functions, the goal is to increase the number of degrees of freedom in some region in order to more accurately represent the solution to some system of equations that cannot be solved analytically. Also, MOAB has a unique mesh representation which impacts the algorithm. This introduction contains a brief review of streaming edge-based tetrahedral refinement. The remainder of the report is broken into three sections: design and implementation, performance, and conclusions. Appendix A contains instructions for end users (simulation authors) on how to employ the refiner.

  14. Trends in petroleum refining process technology

    SciTech Connect (OSTI)

    Kowalczyk, D.

    1995-12-31

    In the 1990`s, the shift toward reformulated fuels and the unrelenting economic pressures on the petroleum refining industry have led to the ongoing development of a series of technological advances to improve fuels quality and industry operating efficiency. In this paper, ten of the most innovative and high impact recent developments in petroleum refining process technology will be highlighted. Process improvements and innovations have occurred in all facets of petroleum refining operations including fluid catalytic cracking, ether production, desulfurization, hydrocracking, gas processing, environmental control and heavy oil processing. Discussed will be the technical and economic impact of each of these new technologies on the petroleum refinery of the late 20th and early 21st century.

  15. JAPAN: Refining options and liberalization plans

    SciTech Connect (OSTI)

    Totto, L.; Isaak, D.T.

    1988-01-01

    The reformulation of Japan's petroleum import policy is important to Japan and to the international energy community. The technical and economic factors involved in opening the Japanese market is unknown. Assuming that foreign refiners have the technical capability to meet Japanese product specifications, the prices and volumes that will prove economical to both parties are also little known. Japanese refiners have been investigating the possibility of exporting gasoline and processing crude for China and Malaysia. The study demonstrates that under certain trade policies, Japan could become a significant product exporter. This study's purpose is to investigate the economic efficiency of alternative petroleum supply options, i.e., combining Japan's refining and product imports. An evaluation of the current import program and the technically feasible alternatives will play a major role in a new import policy. For this evaluation, a linear programming (LP) model of Japan's domestic refinery capacity and the petroleum import system was constructed. 3 figs., 23 tabs.

  16. The strategic outlook for petroleum refiners

    SciTech Connect (OSTI)

    Cobb, C.

    1994-12-31

    After several years of acceptable and relatively reliable profitability, refiners were plunged into uncertainty once again following passage of the Clean Air Act Amendments (CAAA) in 1990. While many of the original uncertainties that attended these regulations have since been resolved, the industry now must prepare for the new manufacturing, distributions, and transportation challenges that undoubtedly will accompany the first stages of reformulated gasoline (RFG) compliance in early 1995. This impending challenge introduces several fundamental questions: (1) How has the industry changed and adjusted to respond to anticipated future needs? (2) What strategies are refiners employing today? (3) What are industry performance expectations over the next several years?

  17. Using supercritical fluids to refine hydrocarbons

    DOE Patents [OSTI]

    Yarbro, Stephen Lee

    2015-06-09

    A system and method for reactively refining hydrocarbons, such as heavy oils with API gravities of less than 20 degrees and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure, using a selected fluid at supercritical conditions. A reaction portion of the system and method delivers lightweight, volatile hydrocarbons to an associated contacting unit which operates in mixed subcritical/supercritical or supercritical modes. Using thermal diffusion, multiphase contact, or a momentum generating pressure gradient, the contacting unit separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques.

  18. Arbitrary Lagrangian Eulerian Adaptive Mesh Refinement

    Energy Science and Technology Software Center (OSTI)

    2009-09-29

    This is a simulation code involving an ALE (arbitrary Lagrangian-Eulerian) hydrocode with AMR (adaptive mesh refinement) and pluggable physics packages for material strength, heat conduction, radiation diffusion, and laser ray tracing developed a LLNL, UCSD, and Berkeley Lab. The code is an extension of the open source SAMRAI (Structured Adaptive Mesh Refinement Application Interface) code/library. The code can be used in laser facilities such as the National Ignition Facility. The code is alsi being appliedmore » to slurry flow (landslides).« less

  19. ITP Petroleum Refining: Energy Efficiency Roadmap for Petroleum Refineries

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    in California | Department of Energy Energy Efficiency Roadmap for Petroleum Refineries in California ITP Petroleum Refining: Energy Efficiency Roadmap for Petroleum Refineries in California refining_roadmap.pdf (1.34 MB) More Documents & Publications ITP Petroleum Refining: Profile of the Petroleum Refining Industry in California: California Industries of the Future Program ITP Petroleum Refining: Energy Efficiency Roadmap for Petroleum Refineries in California Bandwidth Study U.S.

  20. Energy Bandwidth for Petroleum Refining Processes

    SciTech Connect (OSTI)

    none,

    2006-10-01

    The petroleum refining energy bandwidth report analyzes the most energy-intensive unit operations used in U.S. refineries: crude oil distillation, fluid catalytic cracking, catalytic hydrotreating, catalytic reforming, and alkylation. The "bandwidth" provides a snapshot of the energy losses that can potentially be recovered through best practices and technology R&D.

  1. Western Interconnection Synchrophasor Project

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Demonstration Project Western Interconnection Synchrophasor Project Resources & Links Demand Response Energy Efficiency Emerging Technologies Synchrophasor measurements are a...

  2. Using supercritical fluids to refine hydrocarbons

    DOE Patents [OSTI]

    Yarbro, Stephen Lee

    2014-11-25

    This is a method to reactively refine hydrocarbons, such as heavy oils with API gravities of less than 20.degree. and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure using a selected fluid at supercritical conditions. The reaction portion of the method delivers lighter weight, more volatile hydrocarbons to an attached contacting device that operates in mixed subcritical or supercritical modes. This separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques. This method produces valuable products with fewer processing steps, lower costs, increased worker safety due to less processing and handling, allow greater opportunity for new oil field development and subsequent positive economic impact, reduce related carbon dioxide, and wastes typical with conventional refineries.

  3. Refining quadrilateral and brick element meshes

    SciTech Connect (OSTI)

    Schneiders, R.; Debye, J.

    1995-12-31

    We consider the problem of refining unstructured quadrilateral and brick element meshes. We present an algorithm which is a generalization of an algorithm developed by Cheng et. al. for structured quadrilateral element meshes. The problem is solved for the two-dimensional case. Concerning three dimensions we present a solution for some special cases and a general solution that introduces tetrahedral and pyramidal transition elements.

  4. Structured Adaptive Mesh Refinement Application Infrastructure

    Energy Science and Technology Software Center (OSTI)

    2010-07-15

    SAMRAI is an object-oriented support library for structured adaptice mesh refinement (SAMR) simulation of computational science problems, modeled by systems of partial differential equations (PDEs). SAMRAI is developed and maintained in the Center for Applied Scientific Computing (CASC) under ASCI ITS and PSE support. SAMRAI is used in a variety of application research efforts at LLNL and in academia. These applications are developed in collaboration with SAMRAI development team members.

  5. Genealogy of major U.S. refiners - Energy Information Administration

    U.S. Energy Information Administration (EIA) (indexed site)

    Genealogy of Major U.S. Refiners Release date: September 18, 2013 figre 1. World energy consumption, 1990-2040. The structure of the U.S. petroleum refining industry has changed ...

  6. ,"Residual Fuel Oil Sales to End Users Refiner Sales Volumes...

    U.S. Energy Information Administration (EIA) (indexed site)

    Data for" ,"Data 1","Residual Fuel Oil Sales to End Users Refiner Sales ... "Back to Contents","Data 1: Residual Fuel Oil Sales to End Users Refiner Sales Volumes" ...

  7. Grain Refinement of Permanent Mold Cast Copper Base Alloys

    SciTech Connect (OSTI)

    M.Sadayappan; J.P.Thomson; M.Elboujdaini; G.Ping Gu; M. Sahoo

    2005-04-01

    Grain refinement is a well established process for many cast and wrought alloys. The mechanical properties of various alloys could be enhanced by reducing the grain size. Refinement is also known to improve casting characteristics such as fluidity and hot tearing. Grain refinement of copper-base alloys is not widely used, especially in sand casting process. However, in permanent mold casting of copper alloys it is now common to use grain refinement to counteract the problem of severe hot tearing which also improves the pressure tightness of plumbing components. The mechanism of grain refinement in copper-base alloys is not well understood. The issues to be studied include the effect of minor alloy additions on the microstructure, their interaction with the grain refiner, effect of cooling rate, and loss of grain refinement (fading). In this investigation, efforts were made to explore and understand grain refinement of copper alloys, especially in permanent mold casting conditions.

  8. Bandwidth Study U.S. Petroleum Refining | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Petroleum Refining Bandwidth Study U.S. Petroleum Refining Bandwidth Study U.S. Petroleum Refining Energy bandwidth studies of U.S. manufacturing sectors can serve as foundational references in framing the range (or bandwidth) of potential energy savings opportunities. This bandwidth study examines energy consumption and potential energy savings opportunities in U.S. petroleum refining. The study relies on multiple sources to estimate the energy used in nine individual process areas,

  9. ITP Petroleum Refining: Impacts of Condition Assessment on Energy Use:

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Selected Applications in Chemicals Processing and Petroleum Refining | Department of Energy Impacts of Condition Assessment on Energy Use: Selected Applications in Chemicals Processing and Petroleum Refining ITP Petroleum Refining: Impacts of Condition Assessment on Energy Use: Selected Applications in Chemicals Processing and Petroleum Refining condition_assessment.pdf (319.56 KB) More Documents & Publications Effective Fouling Minimization Increases the Efficiency and Productivity of

  10. CEMI Western Regional Summit

    Energy.gov [DOE]

    Please Join Assistant Secretary of Energy Dr. David Danielson for the Clean Energy Manufacturing Initiative's Western Regional Summit. Register now for this free event.

  11. Western Area Power Administration

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Western Area Power Administration Follow-up to Nov. 25, 2008 Transition ... Southwestern Power Administration CONSTRUCTION BUDGET ITEM DESCRIPTION FY 2009* MICROWAVE ...

  12. Deformable elastic network refinement for low-resolution macromolecular crystallography

    SciTech Connect (OSTI)

    Schröder, Gunnar F.; Levitt, Michael; Brunger, Axel T.

    2014-09-01

    An overview of applications of the deformable elastic network (DEN) refinement method is presented together with recommendations for its optimal usage. Crystals of membrane proteins and protein complexes often diffract to low resolution owing to their intrinsic molecular flexibility, heterogeneity or the mosaic spread of micro-domains. At low resolution, the building and refinement of atomic models is a more challenging task. The deformable elastic network (DEN) refinement method developed previously has been instrumental in the determinion of several structures at low resolution. Here, DEN refinement is reviewed, recommendations for its optimal usage are provided and its limitations are discussed. Representative examples of the application of DEN refinement to challenging cases of refinement at low resolution are presented. These cases include soluble as well as membrane proteins determined at limiting resolutions ranging from 3 to 7 Å. Potential extensions of the DEN refinement technique and future perspectives for the interpretation of low-resolution crystal structures are also discussed.

  13. Pollution prevention in the petroleum refining industry

    SciTech Connect (OSTI)

    Fromm, C.H.; White, S.L.

    1995-09-01

    Pollution prevention (P2) as applied to petroleum refining should seek opportunities to reduce waste by preventing oil/hydrocarbon loss, by decreasing consumption of auxiliary input materials, and by improving conversion of incoming impurities into useful products. This chapter will focus on P2 techniques that have found or could find applications in minimizing or eliminating reducible solid waste and wastewater from the petroleum refining process. Air emissions are not covered. The following commonly encountered wastes are considered in this chapter: oily sludges; spent caustics; spent catalysts; miscellaneous process wastes; wastewater; maintenance and materials handling wastes. Following a brief description of waste components and sources, specific P2 techniques are presented in tabular form for each of these wastestreams. None of the P2 techniques presented is discussed here in any detail--the intent is to give the reader a menu of potentially effective P2 options to consider, along with the references where a more detailed discussion may be found. Some of the options presented were advanced in the original references merely as suggestions or plans for improvement. No effort was made to verify their efficacy or applicability in this compilation.

  14. COSMOLOGICAL ADAPTIVE MESH REFINEMENT MAGNETOHYDRODYNAMICS WITH ENZO

    SciTech Connect (OSTI)

    Collins, David C.; Xu Hao; Norman, Michael L.; Li Hui; Li Shengtai

    2010-02-01

    In this work, we present EnzoMHD, the extension of the cosmological code Enzo to include the effects of magnetic fields through the ideal magnetohydrodynamics approximation. We use a higher order Godunov method for the computation of interface fluxes. We use two constrained transport methods to compute the electric field from those interface fluxes, which simultaneously advances the induction equation and maintains the divergence of the magnetic field. A second-order divergence-free reconstruction technique is used to interpolate the magnetic fields in the block-structured adaptive mesh refinement framework already extant in Enzo. This reconstruction also preserves the divergence of the magnetic field to machine precision. We use operator splitting to include gravity and cosmological expansion. We then present a series of cosmological and non-cosmological test problems to demonstrate the quality of solution resulting from this combination of solvers.

  15. Visualization Tools for Adaptive Mesh Refinement Data

    SciTech Connect (OSTI)

    Weber, Gunther H.; Beckner, Vincent E.; Childs, Hank; Ligocki,Terry J.; Miller, Mark C.; Van Straalen, Brian; Bethel, E. Wes

    2007-05-09

    Adaptive Mesh Refinement (AMR) is a highly effective method for simulations that span a large range of spatiotemporal scales, such as astrophysical simulations that must accommodate ranges from interstellar to sub-planetary. Most mainstream visualization tools still lack support for AMR as a first class data type and AMR code teams use custom built applications for AMR visualization. The Department of Energy's (DOE's) Science Discovery through Advanced Computing (SciDAC) Visualization and Analytics Center for Enabling Technologies (VACET) is currently working on extending VisIt, which is an open source visualization tool that accommodates AMR as a first-class data type. These efforts will bridge the gap between general-purpose visualization applications and highly specialized AMR visual analysis applications. Here, we give an overview of the state of the art in AMR visualization research and tools and describe how VisIt currently handles AMR data.

  16. Visualization of Scalar Adaptive Mesh Refinement Data

    SciTech Connect (OSTI)

    VACET; Weber, Gunther; Weber, Gunther H.; Beckner, Vince E.; Childs, Hank; Ligocki, Terry J.; Miller, Mark C.; Van Straalen, Brian; Bethel, E. Wes

    2007-12-06

    Adaptive Mesh Refinement (AMR) is a highly effective computation method for simulations that span a large range of spatiotemporal scales, such as astrophysical simulations, which must accommodate ranges from interstellar to sub-planetary. Most mainstream visualization tools still lack support for AMR grids as a first class data type and AMR code teams use custom built applications for AMR visualization. The Department of Energy's (DOE's) Science Discovery through Advanced Computing (SciDAC) Visualization and Analytics Center for Enabling Technologies (VACET) is currently working on extending VisIt, which is an open source visualization tool that accommodates AMR as a first-class data type. These efforts will bridge the gap between general-purpose visualization applications and highly specialized AMR visual analysis applications. Here, we give an overview of the state of the art in AMR scalar data visualization research.

  17. Secretary Moniz to Discuss Western Energy Landscape at Western...

    Energy.gov (indexed) [DOE]

    -586-4940 Secretary Moniz to Discuss Western Energy Landscape at Western Governors' Association Annual Meeting WASHINGTON - On Saturday, December 6, U.S. Secretary of Energy Ernest...

  18. ITP Petroleum Refining: Energy and Environmental Profile of the U.S.

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Petroleum Refining Industry (November 2007) | Department of Energy and Environmental Profile of the U.S. Petroleum Refining Industry (November 2007) ITP Petroleum Refining: Energy and Environmental Profile of the U.S. Petroleum Refining Industry (November 2007) profile.pdf (1.62 MB) More Documents & Publications ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining Processes ITP Petroleum Refining: Energy and Environmental Profile of the U.S. Petroleum Refining Industry

  19. Secretary Bodman Tours Refinery and Calls for More Domestic Refining

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Capacity | Department of Energy Refinery and Calls for More Domestic Refining Capacity Secretary Bodman Tours Refinery and Calls for More Domestic Refining Capacity May 18, 2006 - 10:43am Addthis Highlights President Bush's Four-Point Plan to Combat High Energy Prices PORT ARTHUR, TX - Secretary of Energy Samuel W. Bodman today renewed the call for expanded oil refining capacity in the United States and discussed additional steps the Department of Energy (DOE) is taking to prepare for the

  20. REFINING PROGRAM HELPS REENERGIZE NEBRASKA UPGRADES | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    REFINING PROGRAM HELPS REENERGIZE NEBRASKA UPGRADES REFINING PROGRAM HELPS REENERGIZE NEBRASKA UPGRADES REFINING PROGRAM HELPS REENERGIZE NEBRASKA UPGRADES In a state where energy costs are low and the home performance workforce had not been established, Nebraska's two largest cities-Omaha and Lincoln-took on the challenge of promoting whole home energy upgrades to homeowners, businesses, and nonprofit organizations. Using $10 million in seed funding from the U.S. Department of Energy's (DOE's)

  1. Parallel adaptive mesh refinement for electronic structure calculations

    SciTech Connect (OSTI)

    Kohn, S.; Weare, J.; Ong, E.; Baden, S.

    1996-12-01

    We have applied structured adaptive mesh refinement techniques to the solution of the LDA equations for electronic structure calculations. Local spatial refinement concentrates memory resources and numerical effort where it is most needed, near the atomic centers and in regions of rapidly varying charge density. The structured grid representation enables us to employ efficient iterative solver techniques such as conjugate gradients with multigrid preconditioning. We have parallelized our solver using an object-oriented adaptive mesh refinement framework.

  2. The Five-Step Development Process Step 3: Project Refinement

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3: Project Refinement 2 1 Potential 3 Refinement 4 Implementation 5 Operations & Maintenance 2 Options 3 Refinement 3 FUNDING AND FINANCING OPTIONS Project Ownership Financing structure is highly dependent on size of the project and the capital available for a given project: * Tribe owns the project (cash purchase or debt) * Tribe hosts the project and buys the electricity (power purchase agreement) * Tribe partners with private sector and co-owns the project (uncertainties about receipt of

  3. ,"U.S. Reformulated, Average Refiner Gasoline Prices"

    U.S. Energy Information Administration (EIA) (indexed site)

    ...www.eia.govdnavpetpetprirefmg2cnusepm0rdpgalm.htm" ,"Source:","Energy Information ... Reformulated Gasoline Retail Sales by Refiners (Dollars per ...

  4. ,"U.S. Conventional, Average Refiner Gasoline Prices"

    U.S. Energy Information Administration (EIA) (indexed site)

    ...www.eia.govdnavpetpetprirefmg2cnusepm0udpgalm.htm" ,"Source:","Energy Information ... Conventional Gasoline Retail Sales by Refiners (Dollars per ...

  5. Petroleum Products Table 43. Refiner Motor Gasoline Volumes...

    U.S. Energy Information Administration (EIA) (indexed site)

    of table. 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State 262 Energy Information Administration Petroleum Marketing Annual 1997 Table 43....

  6. Petroleum Products Table 43. Refiner Motor Gasoline Volumes...

    U.S. Energy Information Administration (EIA) (indexed site)

    1995 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State (Thousand Gallons per Day) - Continued Geographic Area Month Premium All Grades Sales...

  7. Petroleum Products Table 43. Refiner Motor Gasoline Volumes...

    U.S. Energy Information Administration (EIA) (indexed site)

    2000 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State (Thousand Gallons per Day) - Continued Geographic Area Month Premium All Grades Sales...

  8. Petroleum Products Table 43. Refiner Motor Gasoline Volumes...

    U.S. Energy Information Administration (EIA) (indexed site)

    of table. 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State 262 Energy Information Administration Petroleum Marketing Annual 1996 Table 43....

  9. Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) (indexed site)

    Energy Information Administration Petroleum Marketing Annual 1995 Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

  10. Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    250 Energy Information AdministrationPetroleum Marketing Annual 1999 Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State (Thousand Gallons...

  11. Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    Energy Information Administration Petroleum Marketing Annual 1995 Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State (Thousand Gallons...

  12. Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) (indexed site)

    134 Energy Information AdministrationPetroleum Marketing Annual 1998 Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

  13. Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) (indexed site)

    134 Energy Information AdministrationPetroleum Marketing Annual 1999 Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

  14. Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) (indexed site)

    220 Energy Information AdministrationPetroleum Marketing Annual 1998 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State (Thousand Gallons per...

  15. Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    - - - - W W - - - - - - See footnotes at end of table. 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State 292 Energy...

  16. Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    250 Energy Information AdministrationPetroleum Marketing Annual 1998 Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State (Thousand Gallons...

  17. Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) (indexed site)

    220 Energy Information AdministrationPetroleum Marketing Annual 1999 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State (Thousand Gallons per...

  18. Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) (indexed site)

    Energy Information Administration Petroleum Marketing Annual 1995 Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State (Thousand Gallons per...

  19. ,"U.S. Total Refiner Petroleum Product Prices"

    U.S. Energy Information Administration (EIA) (indexed site)

    NUSDPG","EMAEPPRPTGNUSDPG","EMAEPPRLPTGNUSDPG","EMAEPPRHPTGNUSDPG" "Date","U.S. Total Gasoline Retail Sales by Refiners (Dollars per Gallon)","U.S. Aviation Gasoline...

  20. Bandwidth Study U.S. Petroleum Refining | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    This bandwidth study examines energy consumption and potential energy savings opportunities in U.S. petroleum refining. The study relies on multiple sources to estimate the energy ...

  1. The Space-based Telescopes for Actionable Refinement of Ephemeris...

    Office of Scientific and Technical Information (OSTI)

    Title: The Space-based Telescopes for Actionable Refinement of Ephemeris (STARE) mission Authors: Riot, V ; Devries, W ; Bauman, B ; Simms, L ; Carter, D ; Phillion, D ; Olivier, S ...

  2. The Space-Based Telescopes for Actionable Refinement of Ephemeris...

    Office of Scientific and Technical Information (OSTI)

    Title: The Space-Based Telescopes for Actionable Refinement of Ephemeris Pathfinder Mission Authors: Simms, L ; De Vries, W ; RIot, V ; Olivier, S ; Pertica, A ; Bauman, B ; ...

  3. ITP Petroleum Refining: Petroleum Technology Vision 2020 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Petroleum Technology Vision 2020 ITP Petroleum Refining: Petroleum Technology Vision 2020 techvision.pdf (684.96 KB) More Documents & Publications Manufacturing Energy and Carbon ...

  4. Refiners react to changes in the pipeline infrastructure

    SciTech Connect (OSTI)

    Giles, K.A.

    1997-06-01

    Petroleum pipelines have long been a critical component in the distribution of crude and refined products in the U.S. Pipelines are typically the most cost efficient mode of transportation for reasonably consistent flow rates. For obvious reasons, inland refineries and consumers are much more dependent on petroleum pipelines to provide supplies of crude and refined products than refineries and consumers located on the coasts. Significant changes in U.S. distribution patterns for crude and refined products are reshaping the pipeline infrastructure and presenting challenges and opportunities for domestic refiners. These changes are discussed.

  5. New Process for Grain Refinement of Aluminum. Final Report

    SciTech Connect (OSTI)

    Dr. Joseph A. Megy

    2000-09-22

    A new method of grain refining aluminum involving in-situ formation of boride nuclei in molten aluminum just prior to casting has been developed in the subject DOE program over the last thirty months by a team consisting of JDC, Inc., Alcoa Technical Center, GRAS, Inc., Touchstone Labs, and GKS Engineering Services. The Manufacturing process to make boron trichloride for grain refining is much simpler than preparing conventional grain refiners, with attendant environmental, capital, and energy savings. The manufacture of boride grain refining nuclei using the fy-Gem process avoids clusters, salt and oxide inclusions that cause quality problems in aluminum today.

  6. ITP Petroleum Refining: Energy Efficiency Roadmap for Petroleum...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Efficiency Roadmap for Petroleum Refineries in California ITP Petroleum Refining: Energy Efficiency Roadmap for Petroleum Refineries in California refiningroadmap.pdf (1.34 ...

  7. The Space-Based Telescopes for Actionable Refinement of Ephemeris...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: The Space-Based Telescopes for Actionable Refinement of Ephemeris Pathfinder Mission Citation Details In-Document Search Title: The Space-Based Telescopes for ...

  8. Adaptive h -refinement for reduced-order models: ADAPTIVE h -refinement for reduced-order models

    DOE PAGES-Beta [OSTI]

    Carlberg, Kevin T.

    2014-11-05

    Our work presents a method to adaptively refine reduced-order models a posteriori without requiring additional full-order-model solves. The technique is analogous to mesh-adaptive h-refinement: it enriches the reduced-basis space online by ‘splitting’ a given basis vector into several vectors with disjoint support. The splitting scheme is defined by a tree structure constructed offline via recursive k-means clustering of the state variables using snapshot data. This method identifies the vectors to split online using a dual-weighted-residual approach that aims to reduce error in an output quantity of interest. The resulting method generates a hierarchy of subspaces online without requiring large-scale operationsmore » or full-order-model solves. Furthermore, it enables the reduced-order model to satisfy any prescribed error tolerance regardless of its original fidelity, as a completely refined reduced-order model is mathematically equivalent to the original full-order model. Experiments on a parameterized inviscid Burgers equation highlight the ability of the method to capture phenomena (e.g., moving shocks) not contained in the span of the original reduced basis.« less

  9. Steel refining with an electrochemical cell

    DOE Patents [OSTI]

    Blander, Milton; Cook, Glenn M.

    1988-01-01

    Apparatus for processing a metallic fluid containing iron oxide, container for a molten metal including an electrically conductive refractory disposed for contact with the molten metal which contains iron oxide, an electrolyte in the form of a basic slag on top of the molten metal, an electrode in the container in contact with the slag electrically separated from the refractory, and means for establishing a voltage across the refractory and the electrode to reduce iron oxide to iron at the surface of the refractory in contact with the iron oxide containing fluid. A process is disclosed for refining an iron product containing not more than about 10% by weight oxygen and not more than about 10% by weight sulfur, comprising providing an electrolyte of a slag containing one or more of calcium oxide, magnesium oxide, silica or alumina, providing a cathode of the iron product in contact with the electrolyte, providing an anode in contact with the electrolyte electrically separated from the cathode, and operating an electrochemical cell formed by the anode, the cathode and the electrolyte to separate oxygen or sulfur present in the iron product therefrom.

  10. Steel refining with an electrochemical cell

    DOE Patents [OSTI]

    Blander, M.; Cook, G.M.

    1988-05-17

    Apparatus is described for processing a metallic fluid containing iron oxide, container for a molten metal including an electrically conductive refractory disposed for contact with the molten metal which contains iron oxide, an electrolyte in the form of a basic slag on top of the molten metal, an electrode in the container in contact with the slag electrically separated from the refractory, and means for establishing a voltage across the refractory and the electrode to reduce iron oxide to iron at the surface of the refractory in contact with the iron oxide containing fluid. A process is disclosed for refining an iron product containing not more than about 10% by weight oxygen and not more than about 10% by weight sulfur, comprising providing an electrolyte of a slag containing one or more of calcium oxide, magnesium oxide, silica or alumina, providing a cathode of the iron product in contact with the electrolyte, providing an anode in contact with the electrolyte electrically separated from the cathode, and operating an electrochemical cell formed by the anode, the cathode and the electrolyte to separate oxygen or sulfur present in the iron product therefrom. 2 figs.

  11. Steel refining with an electrochemical cell

    DOE Patents [OSTI]

    Blander, M.; Cook, G.M.

    1985-05-21

    Disclosed is an apparatus for processing a metallic fluid containing iron oxide, container for a molten metal including an electrically conductive refractory disposed for contact with the molten metal which contains iron oxide, an electrolyte in the form of a basic slag on top of the molten metal, an electrode in the container in contact with the slag electrically separated from the refractory, and means for establishing a voltage across the refractory and the electrode to reduce iron oxide to iron at the surface of the refractory in contact with the iron oxide containing fluid. A process is disclosed for refining an iron product containing not more than about 10% by weight sulfur, comprising providing an electrolyte of a slag containing one or more of calcium oxide, magnesium oxide, silica or alumina, providing a cathode of the iron product in contact with the electrolyte, providing an anode in contact with the electrolyte electrically separated from the cathode, and operating an electrochemical cell formed by the anode, the cathode and the electrolyte to separate oxygen or sulfur present in the iron product therefrom.

  12. Refining and End Use Study of Coal Liquids

    SciTech Connect (OSTI)

    1997-10-01

    This report summarizes revisions to the design basis for the linear programing refining model that is being used in the Refining and End Use Study of Coal Liquids. This revision primarily reflects the addition of data for the upgrading of direct coal liquids.

  13. ,"Motor Gasoline Sales to End Users, Total Refiner Sales Volumes...

    U.S. Energy Information Administration (EIA) (indexed site)

    ... Refiners (Thousand Gallons per Day)","New Mexico Total Gasoline Retail Sales by Refiners ...87,16127.8,1684.4,1377.2,128.8,497.8,835.6,2030.3,1178.7,674.5,56.4,3.9,4678.6,764.1,9.3,1...

  14. ,"No. 2 Distillate Sales to End Users Refiner Sales Volumes"

    U.S. Energy Information Administration (EIA) (indexed site)

    ... Refiners (Thousand Gallons per Day)","New Mexico No 2 Distillate Retail Sales by Refiners ...57.7,6018.7,64.6,101.5,691.5,1553.8,1576.9,2030.5,4320.3,1350.4,683.2,792.4,316.4,804.3,37...

  15. Valero: Houston Refinery Uses Plant-Wide Assessment to Develop an Energy Optimization and Management System

    SciTech Connect (OSTI)

    2005-08-01

    This Industrial Technologies Program case study describes an energy assessment team's recommendations for saving $5 million in energy, water, and other costs at an oil refinery in Houston, Texas.

  16. Reitveld refinement study of PLZT ceramics

    SciTech Connect (OSTI)

    Kumar, Rakesh; Bavbande, D. V.; Bafna, V. H.; Mohan, D.; Kothiyal, G. P.; Mishra, R.

    2013-02-05

    PLZT ceramics of composition Pb{sub 0.93}La{sub 0.07}(Zr{sub 0.60}Ti{sub 0.40})O{sub 3}, have been milled for 6hrs and 24hrs were prepared by solid state synthesis route. The 6hrs milled and 24hrs milled samples are represented as PLZT-6 and PLZT-24 ceramics respectively. X-ray diffraction (XRD) pattern was recorded at room temperature. The XRD pattern has been analyzed by employing Rietveld refinement method. Phase identification shows that all the peaks observed in PLZT-6 and PLZT-24 ceramics could be indexed to P4mm space group with tetragonal symmetry. The unit cell parameters of 6hrs milled PLZT ceramics are found to be a=b=4.0781(5)A and c=4.0938(7)A and for 24hrs milled PLZT ceramics unit cell parameters are a=b=4.0679(4)A and c=4.1010(5)A . The axial ratio c/a and unit cell volume of PLZT-6 are 1.0038 and 68.09(2)A{sup 3} respectively. In PLZT-24 samples, the axial ratio c/a value is 1.0080 which is little more than that of the 6hr milled PLZT sample whereas the unit cell volume decrease to 67.88 (1) A{sup 3}. An average crystallite size was estimated by using Scherrer's formula. Dielectric properties were obtained by measuring the capacitance and tand loss using Stanford LCR meter.

  17. Tropical Western Pacific

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    govSitesTropical Western Pacific TWP Related Links Facilities and Instruments Manus Island Nauru Island Darwin, AUS ES&H Guidance Statement Operations Science Field Campaigns Year of Tropical Convection Visiting the Site TWP Fact Sheet Images Information for Guest Scientists Tropical Western Pacific-Inactive Manus, Papua New Guinea: 2° 3' 39.64" S, 147° 25' 31.43" E Nauru Island: 0° 31' 15.6" S, 166° 54' 57.60" E Darwin, Australia: 12° 25' 28.56" S, 130° 53'

  18. Integrated process for the solvent refining of coal

    DOE Patents [OSTI]

    Garg, Diwakar

    1983-01-01

    A process is set forth for the integrated liquefaction of coal by the catalytic solvent refining of a feed coal in a first stage to liquid and solid products and the catalytic hydrogenation of the solid product in a second stage to produce additional liquid product. A fresh inexpensive, throw-away catalyst is utilized in the second stage hydrogenation of the solid product and this catalyst is recovered and recycled for catalyst duty in the solvent refining stage without any activation steps performed on the used catalyst prior to its use in the solvent refining of feed coal.

  19. Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) (indexed site)

    253.2 2,222.4 W W 206.4 134.3 - 340.7 See footnotes at end of table. 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State 262 Energy Information...

  20. Table 43. Refiner Motor Gasoline Volumes by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) (indexed site)

    150.0 2,026.7 W W 234.5 161.7 - 396.3 See footnotes at end of table. 43. Refiner Motor Gasoline Volumes by Grade, Sales Type, PAD District, and State 262 Energy Information...

  1. May 28 Webinar to Focus on Tribal Energy Project Refinement

    Energy.gov [DOE]

    Register for the Tribal Renewable Energy Project Refinement webinar, which will be held on Wednesday, May 28, 2014, from 11 a.m. to 12:30 p.m. Mountain time.

  2. Waste minimization for selected residuals in the petroleum refining industry

    SciTech Connect (OSTI)

    1996-12-01

    This technical report on residuals in the petroleum refining industry provides an industry overview, process description, and process flow diagrams. It presents residual descriptions for each of the 29 petroleum refining residuals of concern and what source reduction option exist. It reviews the data sources - RCRA Section 2007 surveys, site visits, and journal articles. It also describes major findings and evaluates the quantity and quality of waste minization information for each source.

  3. Hydrogen Piping Experience in Chevron Refining | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Piping Experience in Chevron Refining Hydrogen Piping Experience in Chevron Refining Overall Perspectives: Few problems with hydrogen piping operating at ambient to at least 800F and pressures up to at least 3000psia as long as we stay within well-defined limits hpwgw_chevronrefining_niccolls.pdf (373.32 KB) More Documents & Publications DOE Hydrogen Pipeline Working Group Workshop Hydrogen Pipeline Working Group Workshop: Code for Hydrogen Pipelines A Review of Stress Corrosion

  4. EERE Success Story-Refining Bio-Oil alongside Petroleum | Department...

    Office of Environmental Management (EM)

    Refining Bio-Oil alongside Petroleum EERE Success Story-Refining Bio-Oil alongside Petroleum April 9, 2013 - 12:00am Addthis W.R. Grace, a leading provider of refining ...

  5. Western Kentucky thrives

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2005-10-01

    Independents and big boys struggle to keep up with increasing demand and a lack of experienced workers in the Illinois Basin. This is the second of a two part series reviewing the coal mining industry in the Illinois Basin which also includes Indiana and Western Kentucky. It includes a classification/correction to Part 1 of the article published in the September 2005 issue (see Coal Abstracts Entry data/number Dec 2005 00204). 4 photos.

  6. US imports. Part II. Refined product market shares, then and now

    SciTech Connect (OSTI)

    Not Available

    1987-07-08

    Unlike imports of crude oil to the US, which were up 45.7% between 1977 and 1986, imports of petroleum products have fallen by about 8.6% during the same period. The crude oil price crash of 1986 deepened US dependency on imports of crude, from 21.4% in 1977 to 25.4% in 1986, but reduced the dependency in the case of total refined products from 11.32% in 1977 to 11.13% in 1986. Comparing the first four months of 1987 with 1986, US dependency on imported petroleum products is down 2.73 percentage points; import dependency on OPEC petroleum products is down 4.60 percentage points; dependency on Arab OPEC countries product imports is down 1.88 percentage points; and for Eastern Hemisphere exporters, that dependency has fallen 2.17 percentage points. This issue also contains: (1) ED refining netback data from the US Gulf and West coasts, Rotterdam, and Singapore for early July 1987; and (2) ED fuel price/tax series for countries of the Western Hemisphere, July 1987 edition. 4 figures, 5 tables.

  7. Western Power Corporation | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Western Power Corporation Place: Perth, Western Australia, Australia Zip: 6000 Product: Western Australian electricity provider. Coordinates: -31.95302, 115.857239 Show Map...

  8. Toward parallel, adaptive mesh refinement for chemically reacting flow simulations

    SciTech Connect (OSTI)

    Devine, K.D.; Shadid, J.N.; Salinger, A.G. Hutchinson, S.A.; Hennigan, G.L.

    1997-12-01

    Adaptive numerical methods offer greater efficiency than traditional numerical methods by concentrating computational effort in regions of the problem domain where the solution is difficult to obtain. In this paper, the authors describe progress toward adding mesh refinement to MPSalsa, a computer program developed at Sandia National laboratories to solve coupled three-dimensional fluid flow and detailed reaction chemistry systems for modeling chemically reacting flow on large-scale parallel computers. Data structures that support refinement and dynamic load-balancing are discussed. Results using uniform refinement with mesh sequencing to improve convergence to steady-state solutions are also presented. Three examples are presented: a lid driven cavity, a thermal convection flow, and a tilted chemical vapor deposition reactor.

  9. The US petroleum refining industry in the 1980's

    SciTech Connect (OSTI)

    Not Available

    1990-10-11

    As part of the EIA program on petroleum, The US Petroleum Refining Industry in the 1980's, presents a historical analysis of the changes that took place in the US petroleum refining industry during the 1980's. It is intended to be of interest to analysts in the petroleum industry, state and federal government officials, Congress, and the general public. The report consists of six chapters and four appendices. Included is a detailed description of the major events and factors that affected the domestic refining industry during this period. Some of the changes that took place in the 1980's are the result of events that started in the 1970's. The impact of these events on US refinery configuration, operations, economics, and company ownership are examined. 23 figs., 11 tabs.

  10. Trends in heavy oil production and refining in California

    SciTech Connect (OSTI)

    Olsen, D.K.; Ramzel, E.B.; Pendergrass, R.A. II

    1992-07-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil production and is part of a study being conducted for the US Department of Energy. This report summarizes trends in oil production and refining in Canada. Heavy oil (10{degrees} to 20{degrees} API gravity) production in California has increased from 20% of the state`s total oil production in the early 1940s to 70% in the late 1980s. In each of the three principal petroleum producing districts (Los Angeles Basin, Coastal Basin, and San Joaquin Valley) oil production has peaked then declined at different times throughout the past 30 years. Thermal production of heavy oil has contributed to making California the largest producer of oil by enhanced oil recovery processes in spite of low oil prices for heavy oil and stringent environmental regulation. Opening of Naval Petroleum Reserve No. 1, Elk Hills (CA) field in 1976, brought about a major new source of light oil at a time when light oil production had greatly declined. Although California is a major petroleum-consuming state, in 1989 the state used 13.3 billion gallons of gasoline or 11.5% of US demand but it contributed substantially to the Nation`s energy production and refining capability. California is the recipient and refines most of Alaska`s 1.7 million barrel per day oil production. With California production, Alaskan oil, and imports brought into California for refining, California has an excess of oil and refined products and is a net exporter to other states. The local surplus of oil inhibits exploitation of California heavy oil resources even though the heavy oil resources exist. Transportation, refining, and competition in the market limit full development of California heavy oil resources.

  11. Trends in heavy oil production and refining in California

    SciTech Connect (OSTI)

    Olsen, D.K.; Ramzel, E.B.; Pendergrass, R.A. II.

    1992-07-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil production and is part of a study being conducted for the US Department of Energy. This report summarizes trends in oil production and refining in Canada. Heavy oil (10{degrees} to 20{degrees} API gravity) production in California has increased from 20% of the state's total oil production in the early 1940s to 70% in the late 1980s. In each of the three principal petroleum producing districts (Los Angeles Basin, Coastal Basin, and San Joaquin Valley) oil production has peaked then declined at different times throughout the past 30 years. Thermal production of heavy oil has contributed to making California the largest producer of oil by enhanced oil recovery processes in spite of low oil prices for heavy oil and stringent environmental regulation. Opening of Naval Petroleum Reserve No. 1, Elk Hills (CA) field in 1976, brought about a major new source of light oil at a time when light oil production had greatly declined. Although California is a major petroleum-consuming state, in 1989 the state used 13.3 billion gallons of gasoline or 11.5% of US demand but it contributed substantially to the Nation's energy production and refining capability. California is the recipient and refines most of Alaska's 1.7 million barrel per day oil production. With California production, Alaskan oil, and imports brought into California for refining, California has an excess of oil and refined products and is a net exporter to other states. The local surplus of oil inhibits exploitation of California heavy oil resources even though the heavy oil resources exist. Transportation, refining, and competition in the market limit full development of California heavy oil resources.

  12. PROP re-refined oil engine test performance

    SciTech Connect (OSTI)

    Linnard, R.E.

    1980-11-01

    Using conventional, commercially-available nonproprietary (to Phillips) additive treatments, engine test programs have successfully demonstrated Phillips Re-refined Oil Process (PROP) oils' compliance with the performance requirements of MIL-L-46152A and API Services SE/CC. This paper reports on the engine testing experience with PROP refined oils as produced in a full-scale 2 MM GPY PROP plant operating with Buyer-collected used oil feedstocks. Comment is also made on the status of the first two PROP plants, one built for the state of North Carolina and the other for Mohawk Oil Company, Ltd., Vancouver B.C., Canada.

  13. Western Wind and Solar Integration Study Phase 2: Preprint

    SciTech Connect (OSTI)

    Lew, D.; Brinkman, G.; Ibanez, E.; Hodge, B.-M.; King, J.

    2012-09-01

    The Western Wind and Solar Integration Study (WWSIS) investigates the impacts of high penetrations of wind and solar power into the Western Interconnection of the United States. WWSIS2 builds on the Phase 1 study but with far greater refinement in the level of data inputs and production simulation. It considers the differences between wind and solar power on systems operations. It considers mitigation options to accommodate wind and solar when full costs of wear-and-tear and full impacts of emissions rates are taken into account. It determines wear-and-tear costs and emissions impacts. New data sets were created for WWSIS2, and WWSIS1 data sets were refined to improve realism of plant output and forecasts. Four scenarios were defined for WWSIS2 that examine the differences between wind and solar and penetration level. Transmission was built out to bring resources to load. Statistical analysis was conducted to investigate wind and solar impacts at timescales ranging from seasonal down to 5 minutes.

  14. Western Gulf Coast Analysis | NISAC

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    of disruptions in the western Gulf Coast petroleum infrastructure operations on the rest of the country, developed a data model of the petrochemical industry in the region to ...

  15. Western Turbine | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Turbine Jump to: navigation, search Name: Western Turbine Place: Aurora, Colorado Zip: 80011 Sector: Wind energy Product: Wind Turbine Installation and Maintainance. Coordinates:...

  16. Western Solargenics | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Solargenics Place: Coquitlam, British Columbia, Canada Zip: V3J 2L7 Sector: Solar, Wind energy Product: Subsidiary firm of Western Wind, to develop solar projects in...

  17. Western Power Customer Services Manager

    Energy.gov [DOE]

    This position is located in the Western Power Services organization (PSW) of Northwest Requirements Marketing, Power Services, and Bonneville Power Administration (BPA). Northwest (NW) Requirements...

  18. Energy Efficiency Improvement in the Petroleum RefiningIndustry

    SciTech Connect (OSTI)

    Worrell, Ernst; Galitsky, Christina

    2005-05-01

    Information has proven to be an important barrier inindustrial energy efficiency improvement. Voluntary government programsaim to assist industry to improve energy efficiency by supplyinginformation on opportunities. ENERGY STAR(R) supports the development ofstrong strategic corporate energy management programs, by providingenergy management information tools and strategies. This paper summarizesENERGY STAR research conducted to develop an Energy Guide for thePetroleum Refining industry. Petroleum refining in the United States isthe largest in the world, providing inputs to virtually every economicsector, including the transport sector and the chemical industry.Refineries spend typically 50 percent of the cash operating costs (e.g.,excluding capital costs and depreciation) on energy, making energy amajor cost factor and also an important opportunity for cost reduction.The petroleum refining industry consumes about 3.1 Quads of primaryenergy, making it the single largest industrial energy user in the UnitedStates. Typically, refineries can economically improve energy efficiencyby 20 percent. The findings suggest that given available resources andtechnology, there are substantial opportunities to reduce energyconsumption cost-effectively in the petroleum refining industry whilemaintaining the quality of the products manufactured.

  19. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    2. U.S. Refiner Retail Petroleum Product Prices Figure J F M A M J J A S O N D 0 20 40 60 80 100 120 1995 Cents per Gallon Excluding Taxes Kero-jet Propane No. 1 Distillate No. 4...

  20. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    4. U.S. Refiner Wholesale Petroleum Product Prices Figure J F M A M J J A S O N D 0 20 40 60 80 100 120 1997 Cents per Gallon Excluding Taxes Kero-jet Propane No. 1 Distillate No....

  1. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    4. U.S. Refiner Wholesale Petroleum Product Prices Figure J F M A M J J A S O N D 0 20 40 60 80 100 120 1995 Cents per Gallon Excluding Taxes Kero-jet Propane No. 1 Distillate No....

  2. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    2. U.S. Refiner Retail Petroleum Product Prices Figure J F M A M J J A S O N D 0 20 40 60 80 100 120 1996 Cents per Gallon Excluding Taxes Kero-jet Propane No. 1 Distillate No. 4...

  3. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    Prices J F M A M J J A S O N D 0 10 20 30 40 50 60 70 1995 Cents per Gallon Excluding Taxes Retail < or 1% Wholesale < or 1% Retail > 1% Wholesale > 1% 7. U.S. Refiner Residual...

  4. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    4. U.S. Refiner Wholesale Petroleum Product Prices Figure J F M A M J J A S O N D 0 20 40 60 80 100 120 1996 Cents per Gallon Excluding Taxes Kero-jet Propane No. 1 Distillate No....

  5. Source: Energy Information Administration, Form EIA-782A, "Refiners...

    U.S. Energy Information Administration (EIA) (indexed site)

    2. U.S. Refiner Retail Petroleum Product Prices Figure J F M A M J J A S O N D 0 20 40 60 80 100 120 1997 Cents per Gallon Excluding Taxes Kero-jet Propane No. 1 Distillate No. 4...

  6. Decontamination of transuranic contaminated metals by melt refining

    SciTech Connect (OSTI)

    Heshmatpour, B.; Copeland, G.L.; Heestand, R.L.

    1983-01-01

    Melt refining of transuranic contaminated metals is a possible decontamination process with the potential advantages of producing metal for reuse and of simplifying chemical analyses. By routinely achieving the 10 nCi/g( about0.1ppm) level by melt refining, scrap metal can be removed from the transuranic waste category. (To demonstrate the effectiveness of this melt refining process, mild steel, stainless steel, nickel, and copper were contaminated with 500 ppm (..mu..g/g) PuO/sub 2/ and melted with various fluxes. The solidified slags and metals were analyzed for their plutonium contents, and corresponding partition ratios for plutonium were calculated. Some metals were double refined in order to study the effect of secondary slag treatment. The initial weight of the slags was also varied to investigate the effect of slag weight on the degree of plutonium removal. In general, all four metals could be decontaminated below 1 ppm (..mu..g/g) Pu ( about100 nCi/g) by a single slag treatment. Doubling the slag weight did not improve decontamination significantly; however, double slag treatment using 5 wt.% slag did decontaminate the metals to below 0.1 ppm (..mu..g/g) Pu (10 nCi/g).)

  7. Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) (indexed site)

    71.8 W 70.5 78.9 W 76.0 83.6 W 69.2 75.2 See footnotes at end of table. 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District and State 176 Energy Information...

  8. Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) (indexed site)

    W 68.4 70.8 W W 78.6 W 85.7 81.8 W 69.3 73.8 See footnotes at end of table. 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District and State 176 Energy Information...

  9. Process for electroslag refining of uranium and uranium alloys

    DOE Patents [OSTI]

    Lewis, P.S. Jr.; Agee, W.A.; Bullock, J.S. IV; Condon, J.B.

    1975-07-22

    A process is described for electroslag refining of uranium and uranium alloys wherein molten uranium and uranium alloys are melted in a molten layer of a fluoride slag containing up to about 8 weight percent calcium metal. The calcium metal reduces oxides in the uranium and uranium alloys to provide them with an oxygen content of less than 100 parts per million. (auth)

  10. ITP Petroleum Refining: Technology Roadmap for the Petroleum Industry |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Technology Roadmap for the Petroleum Industry ITP Petroleum Refining: Technology Roadmap for the Petroleum Industry petroleumroadmap.pdf (338.1 KB) More Documents & Publications ITP Aluminum: Energy and Environmental Profile of the U.S. Aluminum Industry ITP Aluminum: Technical Working Group on Inert Anode Technologies 2011 Strategic Plan

  11. ,"Conventional Gasoline Sales to End Users, Total Refiner Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    ... Refiners (Thousand Gallons per Day)","New Mexico Conventional Gasoline Retail Sales by ...928.8,,587,12358.1,196,1145.9,128.8,497.8,,2030.3,,459.7,56.4,3.9,4678.6,764.1,9.3,1677.4,...

  12. REFINING AND END USE STUDY OF COAL LIQUIDS

    SciTech Connect (OSTI)

    Unknown

    2002-01-01

    This document summarizes all of the work conducted as part of the Refining and End Use Study of Coal Liquids. There were several distinct objectives set, as the study developed over time: (1) Demonstration of a Refinery Accepting Coal Liquids; (2) Emissions Screening of Indirect Diesel; (3) Biomass Gasification F-T Modeling; and (4) Updated Gas to Liquids (GTL) Baseline Design/Economic Study.

  13. Environmental Regulations and Changes in Petroleum Refining Operations

    Gasoline and Diesel Fuel Update

    Environmental Regulations and Changes in Petroleum Refining Operations By Tancred C.M. Lidderdale Contents * Introduction * Motor Gasoline Summer Volatility (RVP) Regulations o Table 1. Summer Volatility Regulations for Motor Gasoline o Table 2. Refinery Inputs and Production of Normal Butane o Figure 1. Refinery Inputs and Production of Normal Butane o Table 3. Price Relationship Between Normal Butane and Motor Gasoline o Table 4. Market Price Premium for Low Vapor Pressure (RVP) Gasoline *

  14. Parallel Block Structured Adaptive Mesh Refinement on Graphics Processing Units

    SciTech Connect (OSTI)

    Beckingsale, D. A.; Gaudin, W. P.; Hornung, R. D.; Gunney, B. T.; Gamblin, T.; Herdman, J. A.; Jarvis, S. A.

    2014-11-17

    Block-structured adaptive mesh refinement is a technique that can be used when solving partial differential equations to reduce the number of zones necessary to achieve the required accuracy in areas of interest. These areas (shock fronts, material interfaces, etc.) are recursively covered with finer mesh patches that are grouped into a hierarchy of refinement levels. Despite the potential for large savings in computational requirements and memory usage without a corresponding reduction in accuracy, AMR adds overhead in managing the mesh hierarchy, adding complex communication and data movement requirements to a simulation. In this paper, we describe the design and implementation of a native GPU-based AMR library, including: the classes used to manage data on a mesh patch, the routines used for transferring data between GPUs on different nodes, and the data-parallel operators developed to coarsen and refine mesh data. We validate the performance and accuracy of our implementation using three test problems and two architectures: an eight-node cluster, and over four thousand nodes of Oak Ridge National Laboratory’s Titan supercomputer. Our GPU-based AMR hydrodynamics code performs up to 4.87× faster than the CPU-based implementation, and has been scaled to over four thousand GPUs using a combination of MPI and CUDA.

  15. Decontamination of steel by melt refining: A literature review

    SciTech Connect (OSTI)

    Ozturk, B.; Fruehan, R.J.

    1994-12-31

    It has been reported that a large amount of metal waste is produced annually by nuclear fuel processing and nuclear power plants. These metal wastes are contaminated with radioactive elements, such as uranium and plutonium. Current Department of Energy guidelines require retrievable storage of all metallic wastes containing transuranic elements above a certain level. Because of high cost, it is important to develop an effective decontamination and volume reduction method for low level contaminated metals. It has been shown by some investigators that a melt refining technique can be used for the processing of the contaminated metal wastes. In this process, contaminated metal is melted wit a suitable flux. The radioactive elements are oxidized and transferred to a slag phase. In order to develop a commercial process it is important to have information on the thermodynamics and kinetics of the removal. Therefore, a literature search was carried out to evaluate the available information on the decontamination uranium and transuranic-contaminated plain steel, copper and stainless steel by melt a refining technique. Emphasis was given to the thermodynamics and kinetics of the removal. Data published in the literature indicate that it is possible to reduce the concentration of radioactive elements to a very low level by the melt refining method. 20 refs.

  16. Mesh refinement for uncertainty quantification through model reduction

    SciTech Connect (OSTI)

    Li, Jing Stinis, Panos

    2015-01-01

    We present a novel way of deciding when and where to refine a mesh in probability space in order to facilitate uncertainty quantification in the presence of discontinuities in random space. A discontinuity in random space makes the application of generalized polynomial chaos expansion techniques prohibitively expensive. The reason is that for discontinuous problems, the expansion converges very slowly. An alternative to using higher terms in the expansion is to divide the random space in smaller elements where a lower degree polynomial is adequate to describe the randomness. In general, the partition of the random space is a dynamic process since some areas of the random space, particularly around the discontinuity, need more refinement than others as time evolves. In the current work we propose a way to decide when and where to refine the random space mesh based on the use of a reduced model. The idea is that a good reduced model can monitor accurately, within a random space element, the cascade of activity to higher degree terms in the chaos expansion. In turn, this facilitates the efficient allocation of computational sources to the areas of random space where they are more needed. For the Kraichnan–Orszag system, the prototypical system to study discontinuities in random space, we present theoretical results which show why the proposed method is sound and numerical results which corroborate the theory.

  17. Case Western University | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    University Jump to: navigation, search Name Case Western University Facility Case Western University Sector Wind energy Facility Type Small Scale Wind Facility Status In Service...

  18. EIA - Natural Gas Pipeline System - Western Region

    U.S. Energy Information Administration (EIA) (indexed site)

    Western Region About U.S. Natural Gas Pipelines - Transporting Natural Gas based on data through 20072008 with selected updates Natural Gas Pipelines in the Western Region ...

  19. Case Study - Western Electricity Coordinating Council

    Energy Savers

    and promoting bulk electric system reliability in the Western Interconnection. ... The Western Interconnection Synchrophasor Program (WISP), led by WECC and involving 18 ...

  20. Western Cooling Efficiency Center | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Cooling Efficiency Center Jump to: navigation, search Name: Western Cooling Efficiency Center Place: Davis, CA Website: http: References: Western Cooling Efficiency Center 1...

  1. Western Electricity Coordinating Council Smart Grid Project ...

    Open Energy Information (Open El) [EERE & EIA]

    your syntax: * Display map References ARRA Smart Grid Investment Grants1 Western Electricity Award2 Western Electricity Coordinating Council, located in Salt Lake City, Utah,...

  2. Western Area Power Administration | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Western Area Power Administration Jump to: navigation, search Name: Western Area Power Administration Place: Colorado Phone Number: 720-962-7000 Website: ww2.wapa.govsites...

  3. Western Area Power Administration Borrowing Authority, Recovery...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Western Area Power Administration Borrowing Authority, Recovery Act Western Area Power Administration Borrowing Authority, Recovery Act PDF icon Microsoft Word - PSRP May 15 2009 ...

  4. ,"Kerosene-Type Jet Fuel Sales to End Users Refiner Sales Volumes...

    U.S. Energy Information Administration (EIA) (indexed site)

    Kerosene-Type Jet Fuel Sales to End Users Refiner Sales Volumes" ,"Click worksheet name or ... Data for" ,"Data 1","Kerosene-Type Jet Fuel Sales to End Users Refiner Sales ...

  5. RFA-14-0001 - In the Matter of Commonwealth Oil Refining Company...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    RFA-14-0001 - In the Matter of Commonwealth Oil Refining Company, Inc.Commonwealth of Puerto Rico RFA-14-0001 - In the Matter of Commonwealth Oil Refining Company, Inc....

  6. Catalytic hydroprocessing of solvent refined coal to provide a liquid and a solid fuel

    SciTech Connect (OSTI)

    Dabkowski, M.J.; Heck, R.H.; Stein, T.R.

    1980-04-29

    In the hydroprocessing of blends of solvent refined coal and recycle solvent, small pore hydrotreating catalysts cause separation of a solid phase from treating blends containing high concentration of solvent refined coal.

  7. Petroleum Refining Sector (NAICS 324110) Energy and GHG Combustion Emissions Profile, November 2012

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    69 2.4 PETROLEUM REFINING SECTOR (NAICS 324110) 2.4.1. Overview of the Petroleum Refining Manufacturing Sector Petroleum refining is a complex industry that generates a diverse slate of fuel products and petrochemicals, from gasoline to asphalt. Refining requires a range of processing steps, including distillation, cracking, reforming, and treating. Most of these processes are highly reliant on process heating and steam energy. Petroleum refineries are an essential part of the U.S. economy.

  8. Occupational employment survey, booklet of definitions. Petroleum refining, coal products, and related industries

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    The publication gives occupational definitions for 149 occupations in the petroleum refining, coal products, and related industries.

  9. Environmental control technology for mining, milling, and refining thorium

    SciTech Connect (OSTI)

    Weakley, S.A.; Blahnik, D.E.; Young, J.K.; Bloomster, C.H.

    1980-02-01

    The purpose of this report is to evaluate, in terms of cost and effectiveness, the various environmental control technologies that would be used to control the radioactive wastes generated in the mining, milling, and refining of thorium from domestic resources. The technologies, in order to be considered for study, had to reduce the radioactivity in the waste streams to meet Atomic Energy Commission (10 CFR 20) standards for natural thorium's maximum permissible concentration (MPC) in air and water. Further regulatory standards or licensing requirements, either federal, state, or local, were not examined. The availability and cost of producing thorium from domestic resources is addressed in a companion volume. The objectives of this study were: (1) to identify the major waste streams generated during the mining, milling, and refining of reactor-grade thorium oxide from domestic resources; and (2) to determine the cost and levels of control of existing and advanced environmental control technologies for these waste streams. Six potential domestic deposits of thorium oxide, in addition to stockpiled thorium sludges, are discussed in this report. A summary of the location and characteristics of the potential domestic thorium resources and the mining, milling, and refining processes that will be needed to produce reactor-grade thorium oxide is presented in Section 2. The wastes from existing and potential domestic thorium oxide mines, mills, and refineries are identified in Section 3. Section 3 also presents the state-of-the-art technology and the costs associated with controlling the wastes from the mines, mills, and refineries. In Section 4, the available environmental control technologies for mines, mills, and refineries are assessed. Section 5 presents the cost and effectiveness estimates for the various environmental control technologies applicable to the mine, mill, and refinery for each domestic resource.

  10. Cogeneration handbook for the petroleum refining industry. [Contains glossary

    SciTech Connect (OSTI)

    Fassbender, L.L.; Garrett-Price, B.A.; Moore, N.L.; Fassbender, A.G.; Eakin, D.E.; Gorges, H.A.

    1984-03-01

    The decision of whether to cogenerate involves several considerations, including technical, economic, environmental, legal, and regulatory issues. Each of these issues is addressed separately in this handbook. In addition, a chapter is included on preparing a three-phase work statement, which is needed to guide the design of a cogeneration system. In addition, an annotated bibliography and a glossary of terminology are provided. Appendix A provides an energy-use profile of the petroleum refining industry. Appendices B through O provide specific information that will be called out in subsequent chapters.

  11. Changing Trends in the Refining Industry (released in AEO2006)

    Reports and Publications

    2006-01-01

    There have been some major changes in the U.S. refining industry recently, prompted in part by a significant decline in the quality of imported crude oil and by increasing restrictions on the quality of finished products. As a result, high-quality crudes, such as the West Texas Intermediate (WTI) crude that serves as a benchmark for oil futures on the New York Mercantile Exchange (NYMEX), have been trading at record premiums to the OPEC (Organization of the Petroleum Exporting Countries) Basket price.

  12. Metal decontamination for waste minimization using liquid metal refining technology

    SciTech Connect (OSTI)

    Joyce, E.L. Jr.; Lally, B.; Ozturk, B.; Fruehan, R.J.

    1993-09-01

    The current Department of Energy Mixed Waste Treatment Project flowsheet indicates that no conventional technology, other than surface decontamination, exists for metal processing. Current Department of Energy guidelines require retrievable storage of all metallic wastes containing transuranic elements above a certain concentration. This project is in support of the National Mixed Low Level Waste Treatment Program. Because of the high cost of disposal, it is important to develop an effective decontamination and volume reduction method for low-level contaminated metals. It is important to be able to decontaminate complex shapes where surfaces are hidden or inaccessible to surface decontamination processes and destruction of organic contamination. These goals can be achieved by adapting commercial metal refining processes to handle radioactive and organic contaminated metal. The radioactive components are concentrated in the slag, which is subsequently vitrified; hazardous organics are destroyed by the intense heat of the bath. The metal, after having been melted and purified, could be recycled for use within the DOE complex. In this project, we evaluated current state-of-the-art technologies for metal refining, with special reference to the removal of radioactive contaminants and the destruction of hazardous organics. This evaluation was based on literature reports, industrial experience, plant visits, thermodynamic calculations, and engineering aspects of the various processes. The key issues addressed included radioactive partitioning between the metal and slag phases, minimization of secondary wastes, operability of the process subject to widely varying feed chemistry, and the ability to seal the candidate process to prevent the release of hazardous species.

  13. Overview of Western's Interconnected Bulk Electric System

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Western's Interconnected Bulk Electric System Western Area Power Admin. Objectives * Describe Western Area Power Administration Region and Facilities Overview * Explain Fundamentals of Electricity, Power Transformers and Transmission Lines * Discuss Overview of the Bulk Electric System (BES) * Objectives Review Western's Service Area Western marketing areas and offices 3 Wholesale Power Services * Markets 10,479 MW from 56 Federal hydropower projects owned by Bureau of Reclamation (BOR) , Army

  14. ENZO: AN ADAPTIVE MESH REFINEMENT CODE FOR ASTROPHYSICS

    SciTech Connect (OSTI)

    Bryan, Greg L.; Turk, Matthew J.; Norman, Michael L.; Bordner, James; Xu, Hao; Kritsuk, Alexei G.; O'Shea, Brian W.; Smith, Britton; Abel, Tom; Wang, Peng; Skillman, Samuel W.; Wise, John H.; Reynolds, Daniel R.; Collins, David C.; Harkness, Robert P.; Kim, Ji-hoon; Kuhlen, Michael; Goldbaum, Nathan; Hummels, Cameron; Collaboration: Enzo Collaboration; and others

    2014-04-01

    This paper describes the open-source code Enzo, which uses block-structured adaptive mesh refinement to provide high spatial and temporal resolution for modeling astrophysical fluid flows. The code is Cartesian, can be run in one, two, and three dimensions, and supports a wide variety of physics including hydrodynamics, ideal and non-ideal magnetohydrodynamics, N-body dynamics (and, more broadly, self-gravity of fluids and particles), primordial gas chemistry, optically thin radiative cooling of primordial and metal-enriched plasmas (as well as some optically-thick cooling models), radiation transport, cosmological expansion, and models for star formation and feedback in a cosmological context. In addition to explaining the algorithms implemented, we present solutions for a wide range of test problems, demonstrate the code's parallel performance, and discuss the Enzo collaboration's code development methodology.

  15. Fuel and oxygen addition for metal smelting or refining process

    DOE Patents [OSTI]

    Schlichting, Mark R.

    1994-01-01

    A furnace 10 for smelting iron ore and/or refining molten iron 20 is equipped with an overhead pneumatic lance 40, through which a center stream of particulate coal 53 is ejected at high velocity into a slag layer 30. An annular stream of nitrogen or argon 51 enshrouds the coal stream. Oxygen 52 is simultaneously ejected in an annular stream encircling the inert gas stream 51. The interposition of the inert gas stream between the coal and oxygen streams prevents the volatile matter in the coal from combusting before it reaches the slag layer. Heat of combustion is thus more efficiently delivered to the slag, where it is needed to sustain the desired reactions occurring there. A second stream of lower velocity oxygen can be delivered through an outermost annulus 84 to react with carbon monoxide gas rising from slag layer 30, thereby adding still more heat to the furnace.

  16. Fuel and oxygen addition for metal smelting or refining process

    DOE Patents [OSTI]

    Schlichting, M.R.

    1994-11-22

    A furnace for smelting iron ore and/or refining molten iron is equipped with an overhead pneumatic lance, through which a center stream of particulate coal is ejected at high velocity into a slag layer. An annular stream of nitrogen or argon enshrouds the coal stream. Oxygen is simultaneously ejected in an annular stream encircling the inert gas stream. The interposition of the inert gas stream between the coal and oxygen streams prevents the volatile matter in the coal from combusting before it reaches the slag layer. Heat of combustion is thus more efficiently delivered to the slag, where it is needed to sustain the desired reactions occurring there. A second stream of lower velocity oxygen can be delivered through an outermost annulus to react with carbon monoxide gas rising from slag layer, thereby adding still more heat to the furnace. 7 figs.

  17. A case study of energy conservation opportunities in copper refining

    SciTech Connect (OSTI)

    Somers, W.E.; Hughen, M.L.; Kurylko, L.; Stone, J.R.

    1982-07-01

    A study of energy usage and distribution in a copper refinery was conducted in an attempt to determine possible cost savings in operations of the plant. The study covered those processes which were the major users of energy, namely, smelting, anode casting, electrolytic refining, steam generation and distribution, and electricity distribution. The study involved obtaining data of mass and energy flows in the refinery; identifying energy conservation opportunities (ECO's); obtaining price, operating costs, and saving potentials; for each conservation measure; and analyzing the economical viability of each conservation proposal. Potential cost savings were found to be substantial in heat recovery from slag and anode furnace hot gases, modification of the central steam supply system, control, and redistribution of electrical loads, insulation of electrolytic tanks, and changes in the atomization of oil.

  18. A comparative assessment of resource efficiency in petroleum refining

    SciTech Connect (OSTI)

    Han, Jeongwoo; Forman, Grant S.; Elgowainy, Amgad; Cai, Hao; Wang, Michael; DiVita, Vincent B.

    2015-03-25

    Because of increasing environmental and energy security concerns, a detailed understanding of energy efficiency and greenhouse gas (GHG) emissions in the petroleum refining industry is critical for fair and equitable energy and environmental policies. To date, this has proved challenging due in part to the complex nature and variability within refineries. In an effort to simplify energy and emissions refinery analysis, we delineated LP modeling results from 60 large refineries from the US and EU into broad categories based on crude density (API gravity) and heavy product (HP) yields. Product-specific efficiencies and process fuel shares derived from this study were incorporated in Argonne National Laboratory’s GREET life-cycle model, along with regional upstream GHG intensities of crude, natural gas and electricity specific to the US and EU regions. The modeling results suggest that refineries that process relatively heavier crude inputs and have lower yields of HPs generally have lower energy efficiencies and higher GHG emissions than refineries that run lighter crudes with lower yields of HPs. The former types of refineries tend to utilize energy-intensive units which are significant consumers of utilities (heat and electricity) and hydrogen. Among the three groups of refineries studied, the major difference in the energy intensities is due to the amount of purchased natural gas for utilities and hydrogen, while the sum of refinery feed inputs are generally constant. These results highlight the GHG emissions cost a refiner pays to process deep into the barrel to produce more of the desirable fuels with low carbon to hydrogen ratio.

  19. A comparative assessment of resource efficiency in petroleum refining

    DOE PAGES-Beta [OSTI]

    Han, Jeongwoo; Forman, Grant S.; Elgowainy, Amgad; Cai, Hao; Wang, Michael; DiVita, Vincent B.

    2015-03-25

    Because of increasing environmental and energy security concerns, a detailed understanding of energy efficiency and greenhouse gas (GHG) emissions in the petroleum refining industry is critical for fair and equitable energy and environmental policies. To date, this has proved challenging due in part to the complex nature and variability within refineries. In an effort to simplify energy and emissions refinery analysis, we delineated LP modeling results from 60 large refineries from the US and EU into broad categories based on crude density (API gravity) and heavy product (HP) yields. Product-specific efficiencies and process fuel shares derived from this study weremore » incorporated in Argonne National Laboratory’s GREET life-cycle model, along with regional upstream GHG intensities of crude, natural gas and electricity specific to the US and EU regions. The modeling results suggest that refineries that process relatively heavier crude inputs and have lower yields of HPs generally have lower energy efficiencies and higher GHG emissions than refineries that run lighter crudes with lower yields of HPs. The former types of refineries tend to utilize energy-intensive units which are significant consumers of utilities (heat and electricity) and hydrogen. Among the three groups of refineries studied, the major difference in the energy intensities is due to the amount of purchased natural gas for utilities and hydrogen, while the sum of refinery feed inputs are generally constant. These results highlight the GHG emissions cost a refiner pays to process deep into the barrel to produce more of the desirable fuels with low carbon to hydrogen ratio.« less

  20. A Comparative Assessment of Resource Efficiency in Petroleum Refining

    SciTech Connect (OSTI)

    Han, Jeongwoo; Forman, G; Elgowainy, Amgad; Cai, Hao; Wang, Michael; Divita, V

    2015-10-01

    Because of increasing environmental and energy security concerns, a detailed understanding of energy efficiency and greenhouse gas (GHG) emissions in the petroleum refining industry is critical for fair and equitable energy and environmental policies. To date, this has proved challenging due in part to the complex nature and variability within refineries. In an effort to simplify energy and emissions refinery analysis, we delineated LP modeling results from 60 large refineries from the US and EU into broad categories based on crude density (API gravity) and heavy product (HP) yields. Product-specific efficiencies and process fuel shares derived from this study were incorporated in Argonne National Laboratory's GREET life-cycle model, along with regional upstream GHG intensities of crude, natural gas and electricity specific to the US and EU regions. The modeling results suggest that refineries that process relatively heavier crude inputs and have lower yields of HPs generally have lower energy efficiencies and higher GHG emissions than refineries that run lighter crudes with lower yields of HPs. The former types of refineries tend to utilize energy-intensive units which are significant consumers of utilities (heat and electricity) and hydrogen. Among the three groups of refineries studied, the major difference in the energy intensities is due to the amount of purchased natural gas for utilities and hydrogen, while the sum of refinery feed inputs are generally constant. These results highlight the GHG emissions cost a refiner pays to process deep into the barrel to produce more of the desirable fuels with low carbon to hydrogen ratio. (c) 2015 Argonne National Laboratory. Published by Elsevier Ltd.

  1. Evaluation of tropical channel refinement using MPAS-A aquaplanet simulations: TROPICAL CHANNEL REFINEMENT IN MPAS-A

    DOE PAGES-Beta [OSTI]

    Martini, Matus N.; Gustafson, William I.; O'Brien, Travis A.; Ma, Po-Lun

    2015-09-01

    Climate models with variable-resolution grids offer a computationally less expensive way to provide more detailed information at regional scales and increased accuracy for processes that cannot be resolved by a coarser grid. This study uses the Model for Prediction Across Scales–Atmosphere (MPAS22A), consisting of a nonhydrostatic dynamical core and a subset of Advanced Research Weather Research and Forecasting (ARW-WRF) model atmospheric physics that have been modified to include the Community Atmosphere Model version 5 (CAM5) cloud fraction parameterization, to investigate the potential benefits of using increased resolution in an tropical channel. The simulations are performed with an idealized aquaplanet configurationmore » using two quasi-uniform grids, with 30 km and 240 km grid spacing, and two variable-resolution grids spanning the same grid spacing range; one with a narrow (20°S–20°N) and one with a wide (30°S–30°N) tropical channel refinement. Results show that increasing resolution in the tropics impacts both the tropical and extratropical circulation. Compared to the quasi-uniform coarse grid, the narrow-channel simulation exhibits stronger updrafts in the Ferrel cell as well as in the middle of the upward branch of the Hadley cell. The wider tropical channel has a closer correspondence to the 30 km quasi-uniform simulation. However, the total atmospheric poleward energy transports are similar in all simulations. The largest differences are in the low-level cloudiness. The refined channel simulations show improved tropical and extratropical precipitation relative to the global 240 km simulation when compared to the global 30 km simulation. All simulations have a single ITCZ. The relatively small differences in mean global and tropical precipitation rates among the simulations are a promising result, and the evidence points to the tropical channel being an effective method for avoiding the extraneous numerical artifacts seen in earlier

  2. Influence of Alloy and Solidification Parameters on Grain Refinement in Aluminum Weld Metal due to Inoculation

    SciTech Connect (OSTI)

    Schempp, Philipp [BAM, Germany; Tang, Z. [BIAS, Germany; Cross, Carl E. [Los Alamos National Laboratory; Seefeld, T. [BIAS, Germany; Pittner, A. [BAM, Germany; Rethmeier, M. [BAM, Germany

    2012-06-28

    The goals are: (1) Establish how much Ti/B grain refiner is need to completely refine aluminum weld metal for different alloys and different welding conditions; (2) Characterize how alloy composition and solidification parameters affect weld metal grain refinement; and (3) Apply relevant theory to understand observed behavior. Conclusions are: (1) additions of Ti/B grain refiner to weld metal in Alloys 1050, 5083, and 6082 resulted in significant grain refinement; (2) grain refinement was more effective in GTAW than LBW, resulting in finer grains at lower Ti content - reason is limited time available for equiaxed grain growth in LBW (inability to occlude columnar grain growth); (3) welding travel speed did not markedly affect grain size within GTAW and LBW clusters; and (4) application of Hunt CET analysis showed experimental G to be on the order of the critical G{sub CET}; G{sub CET} was consistently higher for GTAW than for LBW.

  3. Just the crude oil, please: The oil imports - refining capacity connection

    SciTech Connect (OSTI)

    Not Available

    1994-04-29

    Steep growth has brought crude oil imports converging with the amount of US crude oil production in 1993. Meanwhile, petroleum product imports into the US have been falling because, among other reasons, only a few refiners outside the US can produce refined products to the specifications of environmentally minded US legislators. As refiners have concentrated investment to produce clean fuels only in select facilities, supply and logistical challenges loom closely in the future.

  4. Impact of Environmental Compliance Costs on U.S. Refining Profitability 1995-2001

    Reports and Publications

    2003-01-01

    This report assesses the effects of pollution abatement requirements on the financial performance of U.S. petroleum refining and marketing operations during the 1995 to 2001 period. This study is a follow-up to the October 1997 publication entitled The Impact of Environmental Compliance Costs on U.S. Refining Profitability, that focused on the financial impacts of U.S. refining pollution abatement investment requirements in the 1988 to1995 period.

  5. NorthWestern Energy | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Number: (800) 245-6977 Website: www.northernelectric.coop Twitter: @NorthWesternSD Facebook: https:www.facebook.comNorthWesternEnergy Outage Hotline: (800) 245-6977...

  6. Western NY Energy LLC | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    search Name: Western NY Energy LLC Place: Mount Morris, New York Zip: 14510 Product: Bioethanol producer. References: Western NY Energy LLC1 This article is a stub. You can help...

  7. Western Iowa Energy | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Western Iowa Energy Place: Iowa Product: Biodiesel producer which raised USD 22m from Iowa residents to construct a further plant at Wall Lake. References: Western Iowa Energy1...

  8. Categorical Exclusion Determinations: Western Area Power Administration |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Administration Categorical Exclusion Determinations: Western Area Power Administration Categorical Exclusion Determinations issued by Western Area Power Administration. DOCUMENTS AVAILABLE FOR DOWNLOAD No downloads found for this office.

  9. ,"U.S. Sales for Resale, Total Refiner Motor Gasoline Sales Volumes...

    U.S. Energy Information Administration (EIA) (indexed site)

    Resale, Total Refiner Motor Gasoline Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ...

  10. Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...

    Annual Energy Outlook

    Petroleum Marketing Annual 1999 295 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) - Continued...

  11. Table A1. Refiner/Reseller Motor Gasoline Prices by Grade, PAD...

    U.S. Energy Information Administration (EIA) (indexed site)

    Information Administration Petroleum Marketing Annual 1995 Table A1. RefinerReseller Motor Gasoline Prices by Grade, PAD District and State, 1984-Present (Cents per Gallon...

  12. Table 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    Information Administration Petroleum Marketing Annual 1995 Table 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales Type (Cents per Gallon Excluding Taxes) - Continued...

  13. Table A1. Refiner/Reseller Motor Gasoline Prices by Grade, PAD...

    U.S. Energy Information Administration (EIA) (indexed site)

    AdministrationPetroleum Marketing Annual 1999 401 Table A1. RefinerReseller Motor Gasoline Prices by Grade, PAD District and State, 1984-Present (Cents per Gallon...

  14. Table 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    Information Administration Petroleum Marketing Annual 1995 Table 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales Type (Million Gallons per Day) - Continued Year...

  15. Table A2. Refiner/Reseller Prices of Aviation Fuels, Propane...

    Annual Energy Outlook

    Marketing Annual 1999 421 Table A2. RefinerReseller Prices of Aviation Fuels, Propane, and Kerosene, by PAD District, 1983-Present (Cents per Gallon Excluding Taxes) -...

  16. Table A2. Refiner/Reseller Prices of Aviation Fuels, Propane...

    Annual Energy Outlook

    Marketing Annual 1995 467 Table A2. RefinerReseller Prices of Aviation Fuels, Propane, and Kerosene, by PAD District, 1983-Present (Cents per Gallon Excluding Taxes) -...

  17. Table 12. U.S. Refiner Reformulated Motor Gasoline Prices by...

    U.S. Energy Information Administration (EIA) (indexed site)

    retail outlets, e.g., sales to agricultural customers, commercial sales, and industrial sales. Source: Energy Information Administration Form EIA-782A, "Refiners'Gas...

  18. EERE Success Story-Refining Bio-Oil alongside Petroleum | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Refining Bio-Oil alongside Petroleum EERE Success Story-Refining Bio-Oil alongside Petroleum April 9, 2013 - 12:00am Addthis W.R. Grace, a leading provider of refining technologies, and Pacific Northwest National Laboratory (PNNL) are co-leading an effort to accelerate the development of technologies that enable the processing of bio-oils in petroleum refineries. The ability to leverage existing petroleum-refining infrastructure to produce "drop-in" biofuels (biofuels that

  19. Western Renewable Energy Generation Information System | Open...

    Open Energy Information (Open El) [EERE & EIA]

    Renewable Energy Generation Information System Jump to: navigation, search Name: Western Renewable Energy Generation Information System Place: Sacramento, California Zip:...

  20. Case Study - Western Electricity Coordinating Council

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Smart Grid Strategy for Assuring Reliability of the Western Grid The Western Electricity Coordinating Council (WECC) is the Regional Entity responsible for coordinating and promoting bulk electric system reliability in the Western Interconnection. WECC and its members manage the operation and planning of the vast interconnected transmission system connecting generators and loads across almost 1.8 million square miles of territory. The Western Interconnection Synchrophasor Program (WISP), led by

  1. Western Wind and Solar Integration Study

    SciTech Connect (OSTI)

    GE Energy

    2010-05-01

    This report provides a full description of the Western Wind and Solar Integration Study (WWSIS) and its findings.

  2. EA-098 Western Systems Power Pool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EA-098 Western Systems Power Pool Order authorizing Western Systems Power Pool to export electric energy to Canada PDF icon EA- 98 Western Systems Power Pool More Documents & ...

  3. Environmental regulations and changes in petroleum refining operations

    SciTech Connect (OSTI)

    Lidderdale, T.C.M.

    1996-03-01

    The U.S. petroleum industry has responded to four major new federal rules on motor gasoline product quality in the last 6 years: Phase 1 Summer Volatility (Rvp) Regulation, June 1989; Phase 2 Summer Volatility (Rvp) regulation, May 1992; oxygenated Gasoline, November 1992; and reformulated Gasoline Phase I Simple Model, December 1994. These regulations have generated significant changes in domestic refinery operations, affecting marginal production costs and market prices, refinery yields, and the seasonality of production. Some changes have been dramatic. The price of motor gasoline has increased by as much as 60 {cents}/gal due to regulations. Refinery yields of motor gasoline (refinery output of motor gasoline as a fraction of refinery inputs or total refinery output), which historically peaked in the early summer to meet high summer driving demand, now are highest during the winter months. These changes in domestic refining operations are identified and related to the vapor pressure, oxygenated and reformulated gasoline (RFG) product quality regulations. This analysis uses linear regression equations from the Energy Information Administration`s (EIA) Short-Term Integrated Forecasting System (STIFS). The STIFS model is used for producing forecasts appearing in the EIA`s Short-Term Energy Outlook.

  4. Bioremediation of petroleum wastes from the refining of lubricant oils

    SciTech Connect (OSTI)

    Prince, M.; Sambasivam, Y. )

    1993-02-01

    The results of an initial feasibility study on the bioremediation of sludge are presented. The sludge used in the study was taken from a site containing waste produced during the refining of lubricant oils to which sulfuric acid had been added. The effectiveness of bioremediation was examined using shake flask experiments with indigenous and other bacteria sources and nutrient supplementation. The initial results show limited effectiveness of biological treatment at conditions employing indigenous bacteria and low (2%) sludge concentrations in Bushnell-Haas media. In addition, the indigenous bacteria were seen to degrade the polycyclic aromatic hydrocarbons naphthalene, penanthrene and pyrene which are present at some locations at the site. No apparent degradation of material was seen using conditions of high (30%) sludge concentrations in Bushnell-Haas medium under a variety of conditions. In addition, nutrients were rapidly depleted at these sludge concentrations, with the exception of sulfates which were produced when high sludge concentrations were used. 23 refs., 8 figs., 3 tabs.

  5. Advances in Patch-Based Adaptive Mesh Refinement Scalability

    SciTech Connect (OSTI)

    Gunney, Brian T.N.; Anderson, Robert W.

    2015-12-18

    Patch-based structured adaptive mesh refinement (SAMR) is widely used for high-resolution simu- lations. Combined with modern supercomputers, it could provide simulations of unprecedented size and resolution. A persistent challenge for this com- bination has been managing dynamically adaptive meshes on more and more MPI tasks. The dis- tributed mesh management scheme in SAMRAI has made some progress SAMR scalability, but early al- gorithms still had trouble scaling past the regime of 105 MPI tasks. This work provides two critical SAMR regridding algorithms, which are integrated into that scheme to ensure efficiency of the whole. The clustering algorithm is an extension of the tile- clustering approach, making it more flexible and efficient in both clustering and parallelism. The partitioner is a new algorithm designed to prevent the network congestion experienced by its prede- cessor. We evaluated performance using weak- and strong-scaling benchmarks designed to be difficult for dynamic adaptivity. Results show good scaling on up to 1.5M cores and 2M MPI tasks. Detailed timing diagnostics suggest scaling would continue well past that.

  6. Cosmos++: Relativistic Magnetohydrodynamics on Unstructured Grids with Local Adaptive Refinement

    SciTech Connect (OSTI)

    Anninos, P; Fragile, P C; Salmonson, J D

    2005-05-06

    A new code and methodology are introduced for solving the fully general relativistic magnetohydrodynamic (GRMHD) equations using time-explicit, finite-volume discretization. The code has options for solving the GRMHD equations using traditional artificial-viscosity (AV) or non-oscillatory central difference (NOCD) methods, or a new extended AV (eAV) scheme using artificial-viscosity together with a dual energy-flux-conserving formulation. The dual energy approach allows for accurate modeling of highly relativistic flows at boost factors well beyond what has been achieved to date by standard artificial viscosity methods. it provides the benefit of Godunov methods in capturing high Lorentz boosted flows but without complicated Riemann solvers, and the advantages of traditional artificial viscosity methods in their speed and flexibility. Additionally, the GRMHD equations are solved on an unstructured grid that supports local adaptive mesh refinement using a fully threated oct-tree (in three dimensions) network to traverse the grid hierarchy across levels and immediate neighbors. A number of tests are presented to demonstrate robustness of the numerical algorithms and adaptive mesh framework over a wide spectrum of problems, boosts, and astrophysical applications, including relativistic shock tubes, shock collisions, magnetosonic shocks, Alfven wave propagation, blast waves, magnetized Bondi flow, and the magneto-rotational instability in Kerr black hole spacetimes.

  7. Advances in Patch-Based Adaptive Mesh Refinement Scalability

    DOE PAGES-Beta [OSTI]

    Gunney, Brian T.N.; Anderson, Robert W.

    2015-12-18

    Patch-based structured adaptive mesh refinement (SAMR) is widely used for high-resolution simu- lations. Combined with modern supercomputers, it could provide simulations of unprecedented size and resolution. A persistent challenge for this com- bination has been managing dynamically adaptive meshes on more and more MPI tasks. The dis- tributed mesh management scheme in SAMRAI has made some progress SAMR scalability, but early al- gorithms still had trouble scaling past the regime of 105 MPI tasks. This work provides two critical SAMR regridding algorithms, which are integrated into that scheme to ensure efficiency of the whole. The clustering algorithm is an extensionmore » of the tile- clustering approach, making it more flexible and efficient in both clustering and parallelism. The partitioner is a new algorithm designed to prevent the network congestion experienced by its prede- cessor. We evaluated performance using weak- and strong-scaling benchmarks designed to be difficult for dynamic adaptivity. Results show good scaling on up to 1.5M cores and 2M MPI tasks. Detailed timing diagnostics suggest scaling would continue well past that.« less

  8. ,"No. 2 Diesel Fuel Sales to End Users Refiner Sales Volumes...

    U.S. Energy Information Administration (EIA) (indexed site)

    ... Refiners (Thousand Gallons per Day)","New Mexico No 2 Diesel Retail Sales by Refiners ...17.9,1773.9,,,781.9,,3446.1,296.5,,,,129.9,2030.1,,,,182.8,,416.2,,60.5,369.8,1495.2,,76.6...

  9. EA-98-K Western Systems Power Pool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    K Western Systems Power Pool EA-98-K Western Systems Power Pool Order authorizing Western Systems Power Pool to export electric energy to Canada. EA-98-K Western Systems Power Pool ...

  10. EA-98-G WESTERN SYSTEMS POWER POOL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    G WESTERN SYSTEMS POWER POOL EA-98-G WESTERN SYSTEMS POWER POOL Order authorizing Western System Power Pool to export electric energy to Canada EA-98-G WESTERN SYSTEMS POWER POOL ...

  11. EA-098-D Western Systems Power Pool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    D Western Systems Power Pool EA-098-D Western Systems Power Pool Order authorizing Western Systems Power Pool to export electric energy to Canada PDF icon EA- 98-D Western Systems ...

  12. EA-98-F, Western Systems Power Pool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    F, Western Systems Power Pool EA-98-F, Western Systems Power Pool Order authorizing Western Systems Power Pool to export electric energy to Canada PDF icon EA-98-F, Western Systems ...

  13. EA-98-C Western Systems Power Pool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    C Western Systems Power Pool EA-98-C Western Systems Power Pool Order authorizing Western Systems Power Pool to export electricity to Canada PDF icon EA-98-C Western Systems Power ...

  14. EA-98-H Western Systems Power Pool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    H Western Systems Power Pool EA-98-H Western Systems Power Pool Order Authorizing Western Systems Power Pool to export electric energy to Canada EA-98-H Western Systems Power Pool ...

  15. Impact of oxygenates on petroleum refining, review and forecast

    SciTech Connect (OSTI)

    Unzelman, G.H.

    1995-09-01

    During the coming decade, oxygenates will continue to impact light oil processing and will steadily change the composition of the US gasoline pool. There are several major driving forces that will sustain the gradual influx of oxygen to US gasoline toward the regulatory limits: (1) the positive environmental characteristics of oxygenated compounds, (2) the high-octane quality of ethers that promote elimination of less desirable hydrocarbons and (3) the competitive need for ultra-clean gasoline to compete with alternatives. From 1995 forward, conventional gasoline will gradually shift to RFG (reformulated gasoline) containing a minimum of 2 wt% oxygen and less aromatics. As a result some processing changes, already in motion in the refining industry, will continue. For example, less severe naphtha reforming and cracking innovations to yield more feed for etherification and alkylation. While alternative fuel and vehicle technology will continue to develop, oxygenates in US gasoline will contribute the major alternative dimension to transportation fuel in the foreseeable future. With RFG, internal-combustion engine emissions will be progressively less toxic and lower in photochemical reactivity. The oxygenate mix will favor methyl ethers in spite of the recent methanol price spike. Ethyl ethers will be used on a more limited basis for specific situations where lower volatility and feedstock economics are an advantage. Downstream blending of ethanol will supplement ethers blended at the refinery in situations where economics are more favorable than refinery ethers. Long-range survival of ethanol, as a direct blending agent or feedstock for refinery ethers, depends on one or more of several factors: future crude oil costs, longevity of subsidies and/or mandates, and new production technology based on cellulose yielding ethanol economically competitive with hydrocarbons.

  16. RAM: a Relativistic Adaptive Mesh Refinement Hydrodynamics Code

    SciTech Connect (OSTI)

    Zhang, Wei-Qun; MacFadyen, Andrew I.; /Princeton, Inst. Advanced Study

    2005-06-06

    The authors have developed a new computer code, RAM, to solve the conservative equations of special relativistic hydrodynamics (SRHD) using adaptive mesh refinement (AMR) on parallel computers. They have implemented a characteristic-wise, finite difference, weighted essentially non-oscillatory (WENO) scheme using the full characteristic decomposition of the SRHD equations to achieve fifth-order accuracy in space. For time integration they use the method of lines with a third-order total variation diminishing (TVD) Runge-Kutta scheme. They have also implemented fourth and fifth order Runge-Kutta time integration schemes for comparison. The implementation of AMR and parallelization is based on the FLASH code. RAM is modular and includes the capability to easily swap hydrodynamics solvers, reconstruction methods and physics modules. In addition to WENO they have implemented a finite volume module with the piecewise parabolic method (PPM) for reconstruction and the modified Marquina approximate Riemann solver to work with TVD Runge-Kutta time integration. They examine the difficulty of accurately simulating shear flows in numerical relativistic hydrodynamics codes. They show that under-resolved simulations of simple test problems with transverse velocity components produce incorrect results and demonstrate the ability of RAM to correctly solve these problems. RAM has been tested in one, two and three dimensions and in Cartesian, cylindrical and spherical coordinates. they have demonstrated fifth-order accuracy for WENO in one and two dimensions and performed detailed comparison with other schemes for which they show significantly lower convergence rates. Extensive testing is presented demonstrating the ability of RAM to address challenging open questions in relativistic astrophysics.

  17. EA-98-J Western Systems Power Pool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    J Western Systems Power Pool EA-98-J Western Systems Power Pool Order authorizing Western Systems Power Pool to export electric energy to Canada EA-98-J Western Systems Power Pool (1.56 MB) More Documents & Publications EA-098 Western Systems Power Pool EA-98-I Western Systems Power Pool EA-98-K

  18. EA-98-L Western Systems Power Pool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    L Western Systems Power Pool EA-98-L Western Systems Power Pool Order authorizing Western Systems Power Pool to export electric energy to Canada EA-98-L Western Systems Power Pool (161.12 KB) More Documents & Publications EA-098 Western Systems Power Pool EA-98-I Western Systems Power Pool EA-98-K

  19. EA-098-E Western Systems Power Pool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    E Western Systems Power Pool EA-098-E Western Systems Power Pool Order authorizing Western Systems Power Pool to export electric energy to Canada EA- 98-E Western Systems Power Pool (13.43 KB) More Documents & Publications EA-98-G WESTERN SYSTEMS POWER POOL EA-98-F, Western Systems Power Pool EA-98-M Members of WSPP, Inc.

  20. An adaptive mesh-moving and refinement procedure for one-dimensional conservation laws

    SciTech Connect (OSTI)

    Biswas, R.; Flaherty, J.E.; Arney, D.C. Rensselaer Polytech. Inst., Troy, NY Military Acad., West Point, NY )

    1993-01-01

    We examine the performance of an adaptive mesh-moving and /or local mesh refinement procedure for the finite difference solution of one-dimensional hyperbolic systems of conservation laws. Adaptive motion of a base mesh is designed to isolate spatially distinct phenomena, and recursive local refinement of the time step and cells of the stationary or moving base mesh is performed in regions where a refinement indicator exceeds a prescribed tolerance. These adaptive procedures are incorporated into a computer code that includes a MacCormack finite difference scheme wih Davis' artificial viscosity model and a discretization error estimate based on Richardson's extrapolation. Experiments are conducted on three problems in order to qualify the advantages of adaptive techniques relative to uniform mesh computations and the relative benefits of mesh moving and refinement. Key results indicate that local mesh refinement, with and without mesh moving, can provide reliable solutions at much lower computational cost than possible on uniform meshes; that mesh motion can be used to improve the results of uniform mesh solutions for a modest computational effort; that the cost of managing the tree data structure associated with refinement is small; and that a combination of mesh motion and refinement reliably produces solutions for the least cost per unit accuracy.

  1. Categorical Exclusion Determinations: Western Area Power

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Administration-Upper Great Plains Region | Department of Energy Upper Great Plains Region Categorical Exclusion Determinations: Western Area Power Administration-Upper Great Plains Region Categorical Exclusion Determinations issued by Western Area Power Administration-Upper Great Plains Region. DOCUMENTS AVAILABLE FOR DOWNLOAD July 15, 2015 CX-014172: Categorical Exclusion Determination Fullerton Tap CX(s) Applied: B4.11 Date: 07/15/2015 Location(s): North Dakota Offices(s): Western Area

  2. Western Iowa Power Coop | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Abbreviation: WIPCO Place: Iowa Phone Number: 515.276.5350 Website: www.wipco.com Facebook: https:www.facebook.compagesWestern-Iowa-Power-Co-Op160024430687171 Outage...

  3. Western Plains Energy LLC | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    search Name: Western Plains Energy LLC Place: Oakley, Kansas Zip: 67748 Product: Bioethanol producer using corn as feedstock Coordinates: 40.714855, -111.298899 Show Map...

  4. Western Ethanol Company LLC | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Ethanol Company LLC Jump to: navigation, search Name: Western Ethanol Company LLC Place: Placentia, California Zip: 92871 Product: California-based fuel ethanol distribution and...

  5. Western Massachusetts Electric- Commercial Energy Efficiency Rebates

    Energy.gov [DOE]

    Western Massachusetts Electric (WMECO) helps commercial and industrial customers offset the additional costs of purchasing and installing energy efficient equipment. WMECO offers rebates for...

  6. Mapping Water Availability in the Western US

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Mapping Water Availability in the Western US - Sandia Energy Energy Search Icon Sandia ... Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 ...

  7. Sandian Contributes to Western Electricity Coordinating Council...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Contributes to Western Electricity Coordinating Council Photovoltaic Power Plant Model ... Energy Systems LaboratoryBrayton Lab Photovoltaic Systems Evaluation Laboratory PV ...

  8. Problems of intraplate extensional tectonics, Western United...

    Open Energy Information (Open El) [EERE & EIA]

    tectonics, Western United States, with special emphasis on the Great Basin Author G.A. Davis Conference Basin and Range Symposium and Great Basin Field Conference; Denver,...

  9. Clean Cities: Western Washington Clean Cities coalition

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Studies where her studies focused on policies to stimulate the growth of renewable energy. 1904 Third Ave, Ste 105 Seattle, WA 98101 Western Washington Success Stories Watch...

  10. Influence of Aluminum Content on Grain Refinement and Strength of AZ31 Magnesium GTA Weld Metal

    SciTech Connect (OSTI)

    Babu, N. Kishore; Cross, Carl E.

    2012-06-28

    The goal is to characterize the effect of Al content on AZ31 weld metal, the grain size and strength, and examine role of Al on grain refinement. The approach is to systematically vary the aluminum content of AZ31 weld metal, Measure average grain size in weld metal, and Measure cross-weld tensile properties and hardness. Conclusions are that: (1) increased Al content in AZ31 weld metal results in grain refinement Reason: higher undercooling during solidification; (2) weld metal grain refinement resulted in increased strength & hardness Reason: grain boundary strengthening; and (3) weld metal strength can be raised to wrought base metal levels.

  11. Fact #676: May 23, 2011 U.S. Refiners Produce about 19 Gallons of Gasoline

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    from a Barrel of Oil | Department of Energy 6: May 23, 2011 U.S. Refiners Produce about 19 Gallons of Gasoline from a Barrel of Oil Fact #676: May 23, 2011 U.S. Refiners Produce about 19 Gallons of Gasoline from a Barrel of Oil A standard U.S. barrel contains 42 gallons of crude oil which yields about 44 gallons of petroleum products. The additional 2 gallons of petroleum products come from refiner gains which result in an additional 6% of product. As shown in the figure below, a little more

  12. FIA-15-0002 - In the Matter of Alon Refining Krotz Springs, Inc. |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy 2 - In the Matter of Alon Refining Krotz Springs, Inc. FIA-15-0002 - In the Matter of Alon Refining Krotz Springs, Inc. This Decision concerns an Appeal that Alon Refining Krotz Springs, Inc. (Alon) filed in response to a determination that was issued to it by the Department of Energy's (DOE) Office of Information Resources (OIR). In that determination, the OIR replied to a request for documents that Alon submitted under the Freedom of Information Act (FOIA), 5 U.S.C. §

  13. Recovery Act - Refinement of Cross Flow Turbine Airfoils

    SciTech Connect (OSTI)

    McEntee, Jarlath

    2013-08-30

    Ocean Renewable Power Company, LLC (ORPC) is a global leader in hydrokinetic technology and project development. ORPC develops hydrokinetic power systems and eco-conscious projects that harness the power of oceans and rivers to create clean, predictable renewable energy. ORPC’s technology consists of a family of modular hydrokinetic power systems: the TidGen® Power System, for use at shallow to medium-depth tidal sites; the RivGen™ Power System, for use at river and estuary sites; and the OCGen® Power System, presently under development, for use at deep tidal and offshore ocean current sites. These power systems convert kinetic energy in moving water into clean, renewable, grid-compatible electric power. The core technology component for all ORPC power systems is its patented turbine generator unit (TGU). The TGU uses proprietary advanced design cross flow (ADCF) turbines to drive an underwater permanent magnet generator mounted at the TGU’s center. It is a gearless, direct-drive system that has the potential for high reliability, requires no lubricants and releases no toxins that could contaminate the surrounding water. The hydrokinetic industry shows tremendous promise as a means of helping reduce the U.S.’s use of fossil fuels and dependence on foreign oil. To exploit this market opportunity, cross-flow hydrokinetic devices need to advance beyond the pre-commercial state and more systematic data about the structure and function of cross-flow hydrokinetic devices is required. This DOE STTR project, “Recovery Act - Refinement of Cross Flow Turbine Airfoils,” refined the cross-flow turbine design process to improve efficiency and performance and developed turbine manufacturing processes appropriate for volume production. The project proposed (1) to overcome the lack of data by extensively studying the properties of cross flow turbines, a particularly competitive design approach for extracting hydrokinetic energy and (2) to help ORPC mature its pre

  14. Table A3. Refiner/Reseller Prices of Distillate and Residual...

    U.S. Energy Information Administration (EIA) (indexed site)

    A3. RefinerReseller Prices of Distillate and Residual Fuel Oils, by PAD District, 1983-Present (Cents per Gallon Excluding Taxes) Geographic Area Year No. 1 Distillate No. 2...

  15. Process for solvent refining of coal using a denitrogenated and dephenolated solvent

    DOE Patents [OSTI]

    Garg, Diwakar (Macungie, PA); Givens, Edwin N. (Bethlehem, PA); Schweighardt, Frank K. (Allentown, PA)

    1984-01-01

    A process is disclosed for the solvent refining of non-anthracitic coal at elevated temperatures and pressure in a hydrogen atmosphere using a hydrocarbon solvent which before being recycled in the solvent refining process is subjected to chemical treatment to extract substantially all nitrogenous and phenolic constituents from the solvent so as to improve the conversion of coal and the production of oil in the solvent refining process. The solvent refining process can be either thermal or catalytic. The extraction of nitrogenous compounds can be performed by acid contact such as hydrogen chloride or fluoride treatment, while phenolic extraction can be performed by caustic contact or contact with a mixture of silica and alumina.

  16. Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...

    Annual Energy Outlook

    839.2 135.0 1,251.9 See footnotes at end of table. 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State Energy Information Administration ...

  17. Table 13. U.S. Refiner Reformulated Motor Gasoline Volumes by...

    U.S. Energy Information Administration (EIA) (indexed site)

    3.3 3.4 7.9 3.3 W 11.3 See footnotes at end of table. 13. U.S. Refiner Reformulated Motor Gasoline Volumes by Grade and Sales Type 26 Energy Information Administration ...

  18. Table 8. U.S. Refiner Conventional Motor Gasoline Prices by...

    U.S. Energy Information Administration (EIA) (indexed site)

    88.4 87.8 80.1 70.0 NA 72.6 See footnotes at end of table. 8. U.S. Refiner Conventional Motor Gasoline Prices by Grade and Sales Type 16 Energy Information Administration ...

  19. Table 9. U.S. Refiner Conventional Motor Gasoline Volumes by...

    U.S. Energy Information Administration (EIA) (indexed site)

    5.7 5.9 4.4 12.9 NA 17.3 See footnotes at end of table. 9. U.S. Refiner Conventional Motor Gasoline Volumes by Grade and Sales Type 18 Energy Information Administration ...

  20. Table 12. U.S. Refiner Reformulated Motor Gasoline Prices by...

    U.S. Energy Information Administration (EIA) (indexed site)

    92.8 92.5 84.0 72.5 W 80.7 See footnotes at end of table. 12. U.S. Refiner Reformulated Motor Gasoline Prices by Grade and Sales Type 24 Energy Information Administration ...

  1. Table 8. U.S. Refiner Conventional Motor Gasoline Prices by...

    U.S. Energy Information Administration (EIA) (indexed site)

    87.4 86.9 78.3 68.5 W 70.8 See footnotes at end of table. 8. U.S. Refiner Conventional Motor Gasoline Prices by Grade and Sales Type 16 Energy Information Administration ...

  2. Table 12. U.S. Refiner Reformulated Motor Gasoline Prices by...

    U.S. Energy Information Administration (EIA) (indexed site)

    92.4 92.1 83.7 74.1 W 80.9 See footnotes at end of table. 12. U.S. Refiner Reformulated Motor Gasoline Prices by Grade and Sales Type 24 Energy Information Administration ...

  3. Table 10. U.S. Refiner Oxygenated Motor Gasoline Prices by...

    U.S. Energy Information Administration (EIA) (indexed site)

    98.0 98.0 86.6 75.0 - 80.1 See footnotes at end of table. 10. U.S. Refiner Oxygenated Motor Gasoline Prices by Grade and Sales Type 20 Energy Information Administration ...

  4. Table 10. U.S. Refiner Oxygenated Motor Gasoline Prices by...

    U.S. Energy Information Administration (EIA) (indexed site)

    94.0 93.9 83.2 73.8 - 79.3 See footnotes at end of table. 10. U.S. Refiner Oxygenated Motor Gasoline Prices by Grade and Sales Type 20 Energy Information Administration ...

  5. Table 13. U.S. Refiner Reformulated Motor Gasoline Volumes by...

    U.S. Energy Information Administration (EIA) (indexed site)

    3.6 3.7 7.9 3.1 W 11.0 See footnotes at end of table. 13. U.S. Refiner Reformulated Motor Gasoline Volumes by Grade and Sales Type 26 Energy Information Administration ...

  6. Table 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    NA 26.6 See footnotes at end of table. 14 Energy Information AdministrationPetroleum Marketing Annual 1999 Table 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales Type...

  7. Table 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    NA 27.4 See footnotes at end of table. 14 Energy Information AdministrationPetroleum Marketing Annual 1998 Table 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales Type...

  8. Table A2. Refiner/Reseller Prices of Aviation Fuels, Propane...

    Gasoline and Diesel Fuel Update

    - W 73.5 See footnotes at end of table. A2. RefinerReseller Prices of Aviation Fuels, Propane, and Kerosene, by PAD District, 1983-Present Energy Information Administration ...

  9. Table 9. U.S. Refiner Conventional Motor Gasoline Volumes by...

    U.S. Energy Information Administration (EIA) (indexed site)

    0.1 18.7 See footnotes at end of table. 18 Energy Information Administration Petroleum Marketing Annual 1995 Table 9. U.S. Refiner Conventional Motor Gasoline Volumes by Grade...

  10. Energy and Environmental Profile of the U.S. Petroleum Refining Industry

    SciTech Connect (OSTI)

    Pellegrino, Joan; Brueske, Sabine; Carole, Tracy; Andres, Howard

    2007-11-01

    This 2007 report provides an overview of the U.S. petroleum refining industry, including new data on market trends and energy and material consumption, as well as information on environmental performance.

  11. Impact of Environmental Compliance Costs on U.S. Refining Profitability

    Reports and Publications

    1997-01-01

    Assesses the effects of pollution abatement requirements on the financial performance of U.S. petroleum refining and marketing operations. The analysis draws heavily on financial and operating data from the Energy Information Administration's Financial Reporting System (FRS).

  12. Fact #676: May 23, 2011 U.S. Refiners Produce about 19 Gallons...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    A standard U.S. barrel contains 42 gallons of crude oil which yields about 44 gallons of ... and 10 gallons of diesel fuel are produced from a barrel of crudeoil by U.S. refiners. ...

  13. Western Resource Adequacy: Challenges - Approaches - Metrics | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Resource Adequacy: Challenges - Approaches - Metrics Western Resource Adequacy: Challenges - Approaches - Metrics West-Wide Resource Assessment Team. Committee on Regional Electric Power Cooperation. March 25, 2004 San Francisco, California Western Resource Adequacy: Challenges - Approaches - Metrics (368.96 KB) More Documents & Publications Eastern Wind Integration and Transmission Study (EWITS) (Revised) Estimating the Benefits and Costs of Distributed Energy Technologies

  14. Refinements in the Los Alamos model of the prompt fission neutron spectrum

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | DOE PAGES Published Article: Refinements in the Los Alamos model of the prompt fission neutron spectrum Title: Refinements in the Los Alamos model of the prompt fission neutron spectrum Authors: Madland, D. G. ; Kahler, A. C. Publication Date: 2017-01-01 OSTI Identifier: 1326113 Grant/Contract Number: AC5206NA25396 Type: Published Article Journal Name: Nuclear Physics. A Additional Journal Information: Journal Volume: 957; Journal Issue: C; Related Information: CHORUS

  15. Petroleum movements and investments in the refining industry: The impact of worldwide environmental regulations

    SciTech Connect (OSTI)

    Guariguata U., G.

    1995-09-01

    Since the enactment of the US Clean Air Act Amendments of 1990, the worldwide refining industry has aligned itself to become increasing attuned to the future well-being of the environment. Refiners must now develop strategies which address careful selection of crude slates, significant increases and changes in product movements, and upgrading of facilities to meet growing demand--in short, strategies which allow them to make substantial increases in capital investments. The objective of this paper is to determine the regional capital investments refiners must make in order to comply with environmental legislation. The methodology in making this determination was founded on a comprehensive analysis of worldwide petroleum supply/demand and distribution patterns for the coming five years, and included evaluation of a set of linear programming (LP) models based on forecasts for regional product demands and projections of regional specifications. The models considered two scenarios, in which either (1) refinery expansion occurs chiefly in the market consuming regions, or (2) crude producers take control of incremental crude volumes and further expand their planned refining projects and the marketing of refined products. The results of these models, coupled with an understanding of geopolitical situations and economic analyses, provided estimates for capital expenditures for the coming decade. In specific, the following issues were addressed, and are discussed in this paper: refined product trade outlook; crude supply; crude quality; shipping; and capital investments.

  16. Grain refinement of permanent mold cast copper base alloys. Final report

    SciTech Connect (OSTI)

    Sadayappan, M.; Thomson, J. P.; Elboujdaini, M.; Gu, G. Ping; Sahoo, M.

    2004-04-29

    Grain refinement behavior of copper alloys cast in permanent molds was investigated. This is one of the least studied subjects in copper alloy castings. Grain refinement is not widely practiced for leaded copper alloys cast in sand molds. Aluminum bronzes and high strength yellow brasses, cast in sand and permanent molds, were usually fine grained due to the presence of more than 2% iron. Grain refinement of the most common permanent mold casting alloys, leaded yellow brass and its lead-free replacement EnviroBrass III, is not universally accepted due to the perceived problem of hard spots in finished castings and for the same reason these alloys contain very low amounts of iron. The yellow brasses and Cu-Si alloys are gaining popularity in North America due to their low lead content and amenability for permanent mold casting. These alloys are prone to hot tearing in permanent mold casting. Grain refinement is one of the solutions for reducing this problem. However, to use this technique it is necessary to understand the mechanism of grain refinement and other issues involved in the process. The following issues were studied during this three year project funded by the US Department of Energy and the copper casting industry: (1) Effect of alloying additions on the grain size of Cu-Zn alloys and their interaction with grain refiners; (2) Effect of two grain refining elements, boron and zirconium, on the grain size of four copper alloys, yellow brass, EnviroBrass II, silicon brass and silicon bronze and the duration of their effect (fading); (3) Prediction of grain refinement using cooling curve analysis and use of this method as an on-line quality control tool; (4) Hard spot formation in yellow brass and EnviroBrass due to grain refinement; (5) Corrosion resistance of the grain refined alloys; (6) Transfer the technology to permanent mold casting foundries; It was found that alloying elements such as tin and zinc do not change the grain size of Cu-Zn alloys

  17. Preparation for upgrading western subbituminous coal

    SciTech Connect (OSTI)

    Grimes, R.W.; Cha, C.Y.; Sheesley, D.C.

    1990-11-01

    The objective of this project was to establish the physical and chemical characteristics of western coal and determine the best preparation technologies for upgrading this resource. Western coal was characterized as an abundant, easily mineable, clean, low-sulfur coal with low heating value, high moisture, susceptibility to spontaneous ignition, and considerable transit distances from major markets. Project support was provided by the Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE). The research was conducted by the Western Research Institute, (WRI) in Laramie, Wyoming. The project scope of work required the completion of four tasks: (1) project planning, (2) literature searches and verbal contacts with consumers and producers of western coal, (3) selection of the best technologies to upgrade western coal, and (4) identification of research needed to develop the best technologies for upgrading western coals. The results of this research suggest that thermal drying is the best technology for upgrading western coals. There is a significant need for further research in areas involving physical and chemical stabilization of the dried coal product. Excessive particle-size degradation and resulting dustiness, moisture reabsorption, and high susceptibility to spontaneous combustion are key areas requiring further research. Improved testing methods for the determination of equilibrium moisture and susceptibility to spontaneous ignition under various ambient conditions are recommended.

  18. Kazakhstan's potential provides Western opportunities

    SciTech Connect (OSTI)

    Darnell, R. )

    1993-01-01

    While crude oil production continues to drop in the Russian Federation at a rate of 15% to 20% per year, Kazakhstan's output rose from 440,000 bopd in 1991 to 446,000 bopd, as of November 1992. Much of this increase was exported to the Russian Federation to supplement the latter's declining production. while Kazakhstan received needed Russian goods in exchange for this oil, it isn't getting the hard currency that will be required to upgrade its petroleum industry. This is a serious problem for Kazakh officials, since they are counting on revenues from petroleum exports to invigorate their overall plan for economic growth in this newly independent country. In order to convert Kazakhstan's hydrocarbon potential into economic reality, two critical issues must be addressed immediately. First, Kazakhstan must develop a tax and minerals law that gives multinational petroleum companies an incentive to invest in opening a dedicated crude oil export route through Russia, and at least one alternate export route to the Caspian Sea or Persian Gulf. At present, even the most successful petroleum venture inside Kazakhstan would have to weave its way through the Russian bureaucracy to utilize that existing and inadequate export pipeline system. This quandary, of course, has recently become the undoing of several Western petroleum operations that have managed to actually produce exportable oil inside the Russian Federation itself, but they can't get it out. In addition, three other variables should be considered by any party that is evaluating Kazakhstan as a future area (see map for current fields) of interest for petroleum operations. These are political stability, field operating conditions, and the country's natural gas crisis. Each of these factors, though not as critical as the legal regime and export access, can radically affect how an operator might approach negotiating the terms of its particular project.

  19. History of western oil shale

    SciTech Connect (OSTI)

    Russell, P.L.

    1980-01-01

    The history of oil shale in the United States since the early 1900's is detailed. Research on western oil shale probably began with the work of Robert Catlin in 1915. During the next 15 years there was considerable interest in the oil shales, and oil shale claims were located, and a few recovery plants were erected in Colorado, Nevada, Utah, Wyoming, and Montana. Little shale soil was produced, however, and the major oil companies showed little interest in producing shale oil. The early boom in shale oil saw less than 15 plants produce a total of less than 15,000 barrels of shale oil, all but about 500 barrels of which was produced by the Catlin Operation in Nevada and by the US Bureau of Mines Rulison, Colorado operation. Between 1930 and 1944 plentiful petroleum supplies at reasonable prices prevent any significant interest in shale oil, but oil shortages during World War II caused a resurgence of interest in oil shale. Between 1940 and 1969, the first large-scale mining and retorting operations in soil shale, and the first attempts at true in situ recovery of shale oil began. Only 75,000 barrels of shale oil were produced, but major advancements were made in developing mine designs and technology, and in retort design and technology. The oil embargo of 1973 together with a new offering of oil shale leases by the Government in 1974 resulted in the most concentrated efforts for shale oil production to date. These efforts and the future prospects for shale oil as an energy source in the US are discussed.

  20. Western Renewable Energy Generation Information System ACCOUNT...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Western Renewable Energy Generation Information System ACCOUNT HOLDER REGISTRATION AGREEMENT (Also referred to as the "TERMS OF USE") June 22,2007 Revised May 1,2008 JUL 3 1 REC'D...

  1. Western Electricity Coordinating Council | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Council Jump to: navigation, search Name: Western Electricity Coordinating Council Place: Salt Lake City, UT References: SGIC1 This article is a stub. You can help OpenEI by...

  2. Economic incentives for US refiners to process incremental domestic heavy crude oil

    SciTech Connect (OSTI)

    Guillermo, G.U.

    1995-12-31

    Faced with declining domestic crude supplies and increasing refined product demands, U.S. refiners devote a great deal of attention to securing alternate sources of crude oil. In addition to the traditional and cost-effective choice of imports, a potentially viable source is domestic heavy crude oil. Working with the U.S. Department of Energy and its contractor, the National Institute for Petroleum and Energy Research, Bonner & Moore undertook a project to ascertain the necessary adjustments U.S. refiners would need to make in order to process incremental amounts of heavy crude oil added to domestic refining slates between now and 2010. Results of this study indicated that significant economic investments would be required in order to process these crudes; processing of lighter imports, however, would remain substantially less costly. It would seem, then, that U.S. refiners would elect to process imports over incremental domestic heavy crudes unless they were offered some type of economic incentive to process the heavy oil. This paper addresses the issue of what those economic incentives could be.

  3. Need for refining capacity creates opportunities for producers in Middle East

    SciTech Connect (OSTI)

    Ali, M.S.S. )

    1994-07-11

    Oil industry interest in refining has revived in the past few years in response to rising oil consumption. The trend creates opportunities, for countries in the Middle East, which do not own refining assets nearly in proportion to their crude oil reserved. By closing this gap between reserves and refining capacity, the countries can ease some of the instability now characteristic of the oil market. Some major oil producing countries have begun to move downstream. During the 1980s, Venezuela, Kuwait, Saudi Arabia, Libya, and other members of the Organization of Petroleum Exporting Countries acquired refining assets through direct total purchase or joint ventures. Nevertheless, the oil industry remains largely unintegrated, with the Middle East holding two thirds of worldwide oil reserves but only a small share downstream. As worldwide refining capacity swings from a period of surplus toward one in which the need for new capacity will be built. The paper discusses background of the situation, shrinking surplus, investment requirements, sources of capital, and shipping concerns.

  4. An adaptive grid refinement strategy for the simulation of negative streamers

    SciTech Connect (OSTI)

    Montijn, C. . E-mail: carolynne.montijn@cwi.nl; Hundsdorfer, W. . E-mail: willem.hundsdorfer@cwi.nl; Ebert, U. . E-mail: ute.ebert@cwi.nl

    2006-12-10

    The evolution of negative streamers during electric breakdown of a non-attaching gas can be described by a two-fluid model for electrons and positive ions. It consists of continuity equations for the charged particles including drift, diffusion and reaction in the local electric field, coupled to the Poisson equation for the electric potential. The model generates field enhancement and steep propagating ionization fronts at the tip of growing ionized filaments. An adaptive grid refinement method for the simulation of these structures is presented. It uses finite volume spatial discretizations and explicit time stepping, which allows the decoupling of the grids for the continuity equations from those for the Poisson equation. Standard refinement methods in which the refinement criterion is based on local error monitors fail due to the pulled character of the streamer front that propagates into a linearly unstable state. We present a refinement method which deals with all these features. Tests on one-dimensional streamer fronts as well as on three-dimensional streamers with cylindrical symmetry (hence effectively 2D for numerical purposes) are carried out successfully. Results on fine grids are presented, they show that such an adaptive grid method is needed to capture the streamer characteristics well. This refinement strategy enables us to adequately compute negative streamers in pure gases in the parameter regime where a physical instability appears: branching streamers.

  5. Radionuclides in Western coal. Final report

    SciTech Connect (OSTI)

    Abbott, D.T.; Styron, C.E.; Casella, V.R.

    1983-09-23

    The increase in domestic energy production coupled with the switch from oil and natural gas to coal as a boiler-fuel source have prompted various federal agencies to assess the potential environmental and health risks associated with coal-fired power plants. Because it has been suggested that Western coals contain more uranium than Eastern coals, particular concern has been expressed about radioactive emissions from the increasing number of power plants that burn low-sulfur Western coal. As a result, the radionuclides in coal program was established to analyze low-sulfur coal reserves in Western coal fields for radioactivity. Samples from seams of obvious commercial value were taken from 19 operating mines that represented 65% of Western coal production. Although the present study did not delve deeply into underlying causative factors, the following general conclusions were reached. Commercially exploited Western coals do not show any alarming pattern of radionuclide content and probably have lower radioactivity levels than Eastern coals. The materials that were present appeared to be in secular equilibrium in coal, and a detailed dose assessment failed to show a significant hazard associated with the combustion of Western coal. Flue gas desulfurization technology apparently has no significant impact on radionuclide availability, nor does it pose any significant radiologic health risks. This study has also shown that Western coals are not more radioactive than most soils and that most solid combustion products have emanation powers <1%, which greatly reduce dose estimates from this pathway. In summary, the current use of mined, Western coals in fossil-fueled power plants does not present any significant radiological hazard.

  6. Categorical Exclusion Determinations: Western Area Power

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Administration-Desert Southwest Region | Department of Energy Desert Southwest Region Categorical Exclusion Determinations: Western Area Power Administration-Desert Southwest Region Categorical Exclusion Determinations issued by Western Area Power Administration-Desert Southwest Region. DOCUMENTS AVAILABLE FOR DOWNLOAD March 16, 2016 CX-014718: Categorical Exclusion Determination License Outgrant for the Quarry 187 Road Improvements CX(s) Applied: B1.13 Date: 03/16/2016 Location(s): Nevada

  7. Western Wind Integration Data Set | Grid Modernization | NREL

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Western Wind Integration Data Set The Western Wind Integration Data Set was designed to help energy professionals perform wind integration studies and estimate power production ...

  8. Categorical Exclusion Determinations: Western Area PowerAdministratio...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sierra Nevada Region Categorical Exclusion Determinations: Western Area Power Administration-Sierra Nevada Region Categorical Exclusion Determinations issued by Western Area Power ...

  9. Renewable Energy Network of Entrepreneurs in Western New York...

    Open Energy Information (Open El) [EERE & EIA]

    York Jump to: navigation, search Logo: Renewable Energy Network of Entrepreneurs in Western New York Name: Renewable Energy Network of Entrepreneurs in Western New York Address:...

  10. New Report Says Western Grid Can Weather Disturbances with High...

    Energy.gov (indexed) [DOE]

    available technologies, the Western Interconnection can withstand the crucial first ... particularly for the Western Interconnection, which has a long history of dynamic ...

  11. The Western Wind and Solar Integration Study Phase 3: Technical...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    available technologies, the Western Interconnection can withstand the crucial frst minute ... renewable conditions. The Western Interconnection, in particular, has a long history of ...

  12. Western Grid Can Handle High Renewables in Challenging Conditions...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    dynamic performance of the Western Interconnection in the fractions of a second to one ... particularly for the Western Interconnection, which has a long history of dynamic ...

  13. File:Federal Hydropower - Western Area Power Administration.pdf...

    Open Energy Information (Open El) [EERE & EIA]

    Hydropower - Western Area Power Administration.pdf Jump to: navigation, search File File history File usage Metadata File:Federal Hydropower - Western Area Power Administration.pdf...

  14. Western Wind and Solar Integration Study: Executive Summary,...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    GE Energy MAY 2010 WESTERN WIND AND SOLAR INTEGRATION STUDY: EXECUTIVE SUMMARY NOTICE This ... 20% postconsumer waste WESTERN WIND AND SOLAR INTEGRATION STUDY: EXECUTIVE SUMMARY May ...

  15. EA-98-I Western Systems Power Pool | Department of Energy

    Energy Savers

    Power Pool Order authorizing Western Systems Power Pool to export electric energy to Canada. PDF icon EA-98-I Western Systems Power Pool More Documents & Publications Application...

  16. Transmission Siting in Western United States: Overview and Recommendat...

    Open Energy Information (Open El) [EERE & EIA]

    Western United States: Overview and Recommendations Prepared as Information to the Western Interstate Energy Board Jump to: navigation, search OpenEI Reference LibraryAdd to...

  17. Notices DEPARTMENT OF ENERGY Western Area Power Administration

    Energy.gov (indexed) [DOE]

    Impact Statement and to Conduct a Scoping Meeting; Notice of Floodplain and Wetlands Involvement. SUMMARY: Western Area Power Administration (Western), an agency of the...

  18. Adaptive h -refinement for reduced-order models: ADAPTIVE h -refinement for reduced-order models

    SciTech Connect (OSTI)

    Carlberg, Kevin T.

    2014-11-05

    Our work presents a method to adaptively refine reduced-order models a posteriori without requiring additional full-order-model solves. The technique is analogous to mesh-adaptive h-refinement: it enriches the reduced-basis space online by ‘splitting’ a given basis vector into several vectors with disjoint support. The splitting scheme is defined by a tree structure constructed offline via recursive k-means clustering of the state variables using snapshot data. This method identifies the vectors to split online using a dual-weighted-residual approach that aims to reduce error in an output quantity of interest. The resulting method generates a hierarchy of subspaces online without requiring large-scale operations or full-order-model solves. Furthermore, it enables the reduced-order model to satisfy any prescribed error tolerance regardless of its original fidelity, as a completely refined reduced-order model is mathematically equivalent to the original full-order model. Experiments on a parameterized inviscid Burgers equation highlight the ability of the method to capture phenomena (e.g., moving shocks) not contained in the span of the original reduced basis.

  19. Free kick instead of cross-validation in maximum-likelihood refinement of macromolecular crystal structures

    SciTech Connect (OSTI)

    Pranikar, Jure [Institute Joef Stefan, Jamova 39, 1000 Ljubljana (Slovenia); University of Primorska, (Slovenia); Turk, Duan, E-mail: dusan.turk@ijs.si [Institute Joef Stefan, Jamova 39, 1000 Ljubljana (Slovenia); Center of Excellence for Integrated Approaches in Chemistry and Biology of Proteins, (Slovenia)

    2014-12-01

    The maximum-likelihood free-kick target, which calculates model error estimates from the work set and a randomly displaced model, proved superior in the accuracy and consistency of refinement of crystal structures compared with the maximum-likelihood cross-validation target, which calculates error estimates from the test set and the unperturbed model. The refinement of a molecular model is a computational procedure by which the atomic model is fitted to the diffraction data. The commonly used target in the refinement of macromolecular structures is the maximum-likelihood (ML) function, which relies on the assessment of model errors. The current ML functions rely on cross-validation. They utilize phase-error estimates that are calculated from a small fraction of diffraction data, called the test set, that are not used to fit the model. An approach has been developed that uses the work set to calculate the phase-error estimates in the ML refinement from simulating the model errors via the random displacement of atomic coordinates. It is called ML free-kick refinement as it uses the ML formulation of the target function and is based on the idea of freeing the model from the model bias imposed by the chemical energy restraints used in refinement. This approach for the calculation of error estimates is superior to the cross-validation approach: it reduces the phase error and increases the accuracy of molecular models, is more robust, provides clearer maps and may use a smaller portion of data for the test set for the calculation of R{sub free} or may leave it out completely.

  20. New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants January 31, 2012 - 2:09pm Addthis The Electric Power Research Institute (EPRI), the U.S. Department of Energy (DOE), and the U.S. Nuclear Regulatory Commission (NRC) released a new seismic study today that will help U.S. nuclear facilities in the central and eastern United States reassess seismic hazards. The Central and Eastern United

  1. Appendices: Steam System Opportunity Assessment for the Pulp and Paper, Chemical Manufacturing, and Petroleum Refining Industries

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DE P A R T M E N U E N I T E D S T A T S O F A E R IC A M Office of Energy Efficency and Renewable Energy U.S. Department of Energy Steam System Opportunity Assessment for the Pulp and Paper, Chemical Manufacturing, and Petroleum Refining Industries Steam System Opportunity Assessment for the Pulp and Paper, Chemical Manufacturing, and Petroleum Refining Industries Appendices Appendices (This page intentionally left blank.) Steam System Opportunity Assessment for the Pulp and Paper, Chemical

  2. ,"U.S. Aviation Gasoline Refiner Sales Volumes"

    U.S. Energy Information Administration (EIA) (indexed site)

    Aviation Gasoline Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Aviation Gasoline Refiner Sales Volumes",2,"Monthly","8/2016","1/15/1983" ,"Release Date:","11/1/2016" ,"Next Release Date:","12/1/2016" ,"Excel File

  3. ,"U.S. Residual Fuel Oil Refiner Sales Volumes"

    U.S. Energy Information Administration (EIA) (indexed site)

    Refiner Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Residual Fuel Oil Refiner Sales Volumes",2,"Monthly","8/2016","1/15/1983" ,"Release Date:","11/1/2016" ,"Next Release Date:","12/1/2016" ,"Excel File

  4. ,"U.S. Total Refiner Acquisition Cost of Crude Oil"

    U.S. Energy Information Administration (EIA) (indexed site)

    Refiner Acquisition Cost of Crude Oil" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Total Refiner Acquisition Cost of Crude Oil",3,"Annual",2015,"6/30/1968" ,"Release Date:","11/1/2016" ,"Next Release Date:","12/1/2016" ,"Excel File

  5. Studies on design of a process for organo-refining of coal to obtain super clean coal

    SciTech Connect (OSTI)

    Sharma, C.S.; Sharma, D.K.

    1999-08-01

    Organo-refining of coal results in refining the coal to obtain super clean coal and residual coal. Super clean coal may be used to obtain value added chemicals, products, and cleaner fuels from coal. In the present work, studies on the design of a semicontinuous process for organo-refining of one ton of coal have been made. The results are reported. This is only a cursory attempt for the design, and further studies may be required for designing this process for use in the development of a scaled-up process of organo-refining of coal.

  6. NREL Variability Analysis for the Western Interconnect (Presentation)

    SciTech Connect (OSTI)

    Milligan, M.; Kirby, B.; King, J.

    2011-07-01

    This presentation investigates the effects of several Energy Imbalance Markets implementations in the Western Interconnect.

  7. Rocky Mountain area petroleum product availability with reduced PADD IV refining capacity

    SciTech Connect (OSTI)

    Hadder, G.R.; Chin, S.M.

    1994-02-01

    Studies of Rocky Mountain area petroleum product availability with reduced refining capacity in Petroleum Administration for Defense IV (PADD IV, part of the Rocky Mountain area) have been performed with the Oak Ridge National Laboratory Refinery Yield Model, a linear program which has been updated to blend gasolines to satisfy constraints on emissions of nitrogen oxides and winter toxic air pollutants. The studies do not predict refinery closures in PADD IV. Rather, the reduced refining capacities provide an analytical framework for probing the flexibility of petroleum refining and distribution for winter demand conditions in the year 2000. Industry analysts have estimated that, for worst case scenarios, 20 to 35 percent of PADD IV refining capacity could be shut-down as a result of clean air and energy tax legislation. Given these industry projections, the study scenarios provide the following conclusions: The Rocky Mountain area petroleum system would have the capability to satisfy winter product demand with PADD IV refinery capacity shut-downs in the middle of the range of industry projections, but not in the high end of the range of projections. PADD IV crude oil production can be maintained by re-routing crude released from PADD IV refinery demands to satisfy increased crude oil demands in PADDs II (Midwest), III (Gulf Coast), and Washington. Clean Air Act product quality regulations generally do not increase the difficulty of satisfying emissions reduction constraints in the scenarios.

  8. Environmental Regulations and Changes in Petroleum Refining Operations (Released in the STEO June 1998)

    Reports and Publications

    1998-01-01

    Changes in domestic refining operations are identified and related to the summer Reid vapor pressure (RVP) restrictions and oxygenate blending requirements. This analysis uses published Energy Information Administration survey data and linear regression equations from the Short-Term Integrated Forecasting System (STIFS). The STIFS model is used for producing forecasts appearing in the Short-Term Energy Outlook.

  9. Table A1. Refiner/Reseller Motor Gasoline Prices by Grade, PAD...

    U.S. Energy Information Administration (EIA) (indexed site)

    71.6 92.3 78.2 101.8 83.6 87.5 74.7 See footnotes at end of table. A1. RefinerReseller Motor Gasoline Prices by Grade, PAD District, and State, 1984-Present 452 Energy Information...

  10. Table 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    61.5 67.3 89.8 89.5 82.2 69.4 71.1 74.9 See footnotes at end of table. 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales Type 12 Energy Information Administration ...

  11. Table 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    35.2 213.6 9.5 9.8 12.9 16.6 NA 29.5 See footnotes at end of table. 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales Type 14 Energy Information Administration ...

  12. Table 11. U.S. Refiner Oxygenated Motor Gasoline Volumes by...

    U.S. Energy Information Administration (EIA) (indexed site)

    W 5.6 0.5 0.5 0.5 0.4 - 0.9 See footnotes at end of table. 11. U.S. Refiner Oxygenated Motor Gasoline Volumes by Grade and Sales Type 22 Energy Information Administration ...

  13. Table 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    62.2 68.5 90.1 89.6 82.4 70.9 NA 75.9 See footnotes at end of table. 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales Type 12 Energy Information Administration ...

  14. Table 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales...

    U.S. Energy Information Administration (EIA) (indexed site)

    33.9 215.8 9.7 10.0 12.1 16.3 0.0 28.4 See footnotes at end of table. 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales Type 14 Energy Information Administration ...

  15. Table 11. U.S. Refiner Oxygenated Motor Gasoline Volumes by...

    U.S. Energy Information Administration (EIA) (indexed site)

    - 4.9 0.4 0.4 0.3 0.4 - 0.7 See footnotes at end of table. 11. U.S. Refiner Oxygenated Motor Gasoline Volumes by Grade and Sales Type 22 Energy Information Administration ...

  16. Towards solution and refinement of organic crystal structures by fitting to the atomic pair distribution function

    DOE PAGES-Beta [OSTI]

    Prill, Dragica; Juhas, Pavol; Billinge, Simon J. L.; Schmidt, Martin U.

    2016-01-01

    In this study, a method towards the solution and refinement of organic crystal structures by fitting to the atomic pair distribution function (PDF) is developed. Approximate lattice parameters and molecular geometry must be given as input. The molecule is generally treated as a rigid body. The positions and orientations of the molecules inside the unit cell are optimized starting from random values. The PDF is obtained from carefully measured X-ray powder diffraction data. The method resembles `real-space' methods for structure solution from powder data, but works with PDF data instead of the diffraction pattern itself. As such it may bemore » used in situations where the organic compounds are not long-range-ordered, are poorly crystalline, or nanocrystalline. The procedure was applied to solve and refine the crystal structures of quinacridone (β phase), naphthalene and allopurinol. In the case of allopurinol it was even possible to successfully solve and refine the structure in P1 with four independent molecules. As an example of a flexible molecule, the crystal structure of paracetamol was refined using restraints for bond lengths, bond angles and selected torsion angles. In all cases, the resulting structures are in excellent agreement with structures from single-crystal data.« less

  17. Tools for macromolecular model building and refinement into electron cryo-microscopy reconstructions

    SciTech Connect (OSTI)

    Brown, Alan; Long, Fei; Nicholls, Robert A.; Toots, Jaan; Emsley, Paul; Murshudov, Garib

    2015-01-01

    A description is given of new tools to facilitate model building and refinement into electron cryo-microscopy reconstructions. The recent rapid development of single-particle electron cryo-microscopy (cryo-EM) now allows structures to be solved by this method at resolutions close to 3 Å. Here, a number of tools to facilitate the interpretation of EM reconstructions with stereochemically reasonable all-atom models are described. The BALBES database has been repurposed as a tool for identifying protein folds from density maps. Modifications to Coot, including new Jiggle Fit and morphing tools and improved handling of nucleic acids, enhance its functionality for interpreting EM maps. REFMAC has been modified for optimal fitting of atomic models into EM maps. As external structural information can enhance the reliability of the derived atomic models, stabilize refinement and reduce overfitting, ProSMART has been extended to generate interatomic distance restraints from nucleic acid reference structures, and a new tool, LIBG, has been developed to generate nucleic acid base-pair and parallel-plane restraints. Furthermore, restraint generation has been integrated with visualization and editing in Coot, and these restraints have been applied to both real-space refinement in Coot and reciprocal-space refinement in REFMAC.

  18. EIS-0069: Solvent Refined Coal-II Demonstration Project, Fort Martin, Monongalia County, West Virginia

    Energy.gov [DOE]

    The U.S. Department of Energy developed this statement to assess the potential environmental, economic and social impacts associated with the construction and short-term operation of a 6,000-tons-per-stream-day-capacity facility that will demonstrate the technical operability, economic viability, and environmental acceptability of the solvent refined coal process at Fort Martin, West Virginia.

  19. Towards solution and refinement of organic crystal structures by fitting to the atomic pair distribution function

    SciTech Connect (OSTI)

    Prill, Dragica; Juhas, Pavol; Billinge, Simon J. L.; Schmidt, Martin U.

    2016-01-01

    In this study, a method towards the solution and refinement of organic crystal structures by fitting to the atomic pair distribution function (PDF) is developed. Approximate lattice parameters and molecular geometry must be given as input. The molecule is generally treated as a rigid body. The positions and orientations of the molecules inside the unit cell are optimized starting from random values. The PDF is obtained from carefully measured X-ray powder diffraction data. The method resembles `real-space' methods for structure solution from powder data, but works with PDF data instead of the diffraction pattern itself. As such it may be used in situations where the organic compounds are not long-range-ordered, are poorly crystalline, or nanocrystalline. The procedure was applied to solve and refine the crystal structures of quinacridone (β phase), naphthalene and allopurinol. In the case of allopurinol it was even possible to successfully solve and refine the structure in P1 with four independent molecules. As an example of a flexible molecule, the crystal structure of paracetamol was refined using restraints for bond lengths, bond angles and selected torsion angles. In all cases, the resulting structures are in excellent agreement with structures from single-crystal data.

  20. 2012 Annual Report [WESTERN AREA POWER ADMINISTRATION

    SciTech Connect (OSTI)

    2012-01-01

    Fiscal Year 2012 brought some tumultuous and uncertain times to Western. The utility industry and technology continued to evolve, and the demand for constant flow of power and transmission system reliability continued to increase. Western kept pace by continuing to deliver reliable, cost-based hydropower while reviewing and updating business practices that took into account how the energy industry is evolving. During this time of exponential change, Western tackled many challenges, including: Reviewing the Transmission Infrastructure Program processes and procedures; Responding to Secretary of Energy Steven Chu’s memorandum to create a modern, efficient and reliable transmission grid; Weathering record-breaking natural disasters in our service territory; Completing our role in TIP’s flagship project—the Montana Alberta Tie Ltd. transmission line; Incorporating new, far-reaching regulations and industry trends.

  1. Secular equilibrium of radium in Western coal

    SciTech Connect (OSTI)

    Casella, V.R.; Fleissner, J.G.; Styron, C.E.

    1980-01-01

    Concentrations of radium-226, radium-228, and thorium-228 in coal from six Western states have been measured by gamma spectroscopy. The existence of secular equilibrium was verified for radium-226 and previously measured uranium-238 and also for radium-228 and thorium-228. The measured radionuclide concentrations for Western coal averaged about 0.3 pCi/g for radium-226 and 0.2 pCi/g for radium-228 and thorium-228. These average values are not greatly different from those in coal from other provinces of the United States.

  2. Topic B Awardee: Western Governors' Association

    Energy.gov [DOE]

    For the Topic A input requirements of the award, the states and provinces in the Western Interconnection have formed a new committee -- the State and Provincial Steering Committee -- to provide input in regional transmission planning and analysis in the interconnection. The Committee will consist of representatives from each state and province in the Western Interconnection. Pending formal announcement, the Committee is preparing to carry out the Topic A input tasks as outlined in Topic B of the U.S. Department of Energy transmission funding opportunity announcement issued in June 2009. A preliminary meeting of the Steering Committee was held in Tempe, AZ on November 6, 2009.

  3. Exploiting structure similarity in refinement: automated NCS and target-structure restraints in BUSTER

    SciTech Connect (OSTI)

    Smart, Oliver S. Womack, Thomas O.; Flensburg, Claus; Keller, Peter; Paciorek, Włodek; Sharff, Andrew; Vonrhein, Clemens; Bricogne, Gérard

    2012-04-01

    Local structural similarity restraints (LSSR) provide a novel method for exploiting NCS or structural similarity to an external target structure. Two examples are given where BUSTER re-refinement of PDB entries with LSSR produces marked improvements, enabling further structural features to be modelled. Maximum-likelihood X-ray macromolecular structure refinement in BUSTER has been extended with restraints facilitating the exploitation of structural similarity. The similarity can be between two or more chains within the structure being refined, thus favouring NCS, or to a distinct ‘target’ structure that remains fixed during refinement. The local structural similarity restraints (LSSR) approach considers all distances less than 5.5 Å between pairs of atoms in the chain to be restrained. For each, the difference from the distance between the corresponding atoms in the related chain is found. LSSR applies a restraint penalty on each difference. A functional form that reaches a plateau for large differences is used to avoid the restraints distorting parts of the structure that are not similar. Because LSSR are local, there is no need to separate out domains. Some restraint pruning is still necessary, but this has been automated. LSSR have been available to academic users of BUSTER since 2009 with the easy-to-use -autoncs and @@target target.pdb options. The use of LSSR is illustrated in the re-refinement of PDB entries http://scripts.iucr.org/cgi-bin/cr.cgi?rm, where -target enables the correct ligand-binding structure to be found, and http://scripts.iucr.org/cgi-bin/cr.cgi?rm, where -autoncs contributes to the location of an additional copy of the cyclic peptide ligand.

  4. Topic A Awardee: Western Electricity Coordinating Council

    Energy.gov [DOE]

    WECC received notification from the U.S. Department of Energy (DOE) on December 18, 2009 that it has been awarded $14.5 million in funding from ARRA to conduct interconnection-wide electric transmission planning studies in the Western Interconnection.

  5. QER- Comment of Western Environmental Law Center

    Office of Energy Efficiency and Renewable Energy (EERE)

    To whom it may concern, I provided the following comments at the public meeting in Santa Fe, NM on 8/11/14: My name is Thomas Singer, and I am a Senior Policy Advisor at the Western Environmental Law Center.

  6. Magnesium Recycling of Partially Oxidized, Mixed Magnesium-Aluminum Scrap Through Combined Refining and Solid Oxide Membrane (SOM) Electrolysis Processes

    SciTech Connect (OSTI)

    Guan, Xiaofei; Zink, Peter; Pal, Uday

    2012-03-11

    Pure magnesium (Mg) is recycled from 19g of partially oxidized 50.5wt.%Mg-Aluminum (Al) alloy. During the refining process, potentiodynamic scans (PDS) were performed to determine the electrorefining potential for magnesium. The PDS show that the electrorefining potential increases over time as the Mg content inside the Mg-Al scrap decreases. Up to 100% percent of magnesium is refined from the Mg-Al scrap by a novel refining process of dissolving magnesium and its oxide into a flux followed by vapor phase removal of dissolved magnesium and subsequently condensing the magnesium vapors in a separate condenser. The solid oxide membrane (SOM) electrolysis process is employed in the refining system to enable additional recycling of magnesium from magnesium oxide (MgO) in the partially oxidized Mg-Al scrap. The combination of the refining and SOM processes yields 7.4g of pure magnesium; could not collect and weigh all of the magnesium recovered.

  7. Magnesium Recycling of Partially Oxidized, Mixed Magnesium-Aluminum Scrap through Combined Refining and Solid Oxide Membrane Electrolysis Processes

    SciTech Connect (OSTI)

    Xiaofei Guan; Peter A. Zink; Uday B. Pal; Adam C. Powell

    2012-01-01

    Pure magnesium (Mg) is recycled from 19g of partially oxidized 50.5wt.% Mg-Aluminum (Al) alloy. During the refining process, potentiodynamic scans (PDS) were performed to determine the electrorefining potential for magnesium. The PDS show that the electrorefining potential increases over time as the magnesium content inside the Mg-Al scrap decreases. Up to 100% percent of magnesium is refined from the Mg-Al scrap by a novel refining process of dissolving magnesium and its oxide into a flux followed by vapor phase removal of dissolved magnesium and subsequently condensing the magnesium vapor. The solid oxide membrane (SOM) electrolysis process is employed in the refining system to enable additional recycling of magnesium from magnesium oxide (MgO) in the partially oxidized Mg-Al scrap. The combination of the refining and SOM processes yields 7.4g of pure magnesium.

  8. How Western Does Business: An Explanation of Western's Products and Services

    SciTech Connect (OSTI)

    2012-10-01

    The mission of the Western Area Power Administration is to market and deliver reliable, renewable, cost-based hydroelectric power and related services. This guide provides an overview of Western’s history and how Western carries out that mission and provides electrical, transmission and ancillary services. It also discusses how we develop plans for marketing our most valuable resources—long-term firm capacity and energy.

  9. Profiling of selenium removal in hydrogen ambient zone-refined tellurium bar using RF-GDOES

    SciTech Connect (OSTI)

    Anil, G. . E-mail: anilpillai_99@yahoo.com; Reddy, M.R.P.; Prasad, D.S.; Ali, S.T.; Munirathnam, N.R.; Prakash, T.L.

    2007-01-15

    Ultrapure tellurium (Te) metal has become an important metal in the strategic sector for fabricating high performance infrared devices for thermal imaging and night vision cameras. Zone refining (ZR) is a proven technique for purification of Te. Selenium (Se), present as an impurity in Te, is not easily removed by ZR under normal conditions as the segregation coefficient (K) is around 0.44-0.50. Hence, ZR was performed in a hydrogen atmosphere, during which Se gets converted to hydrogen selenide at the molten moving zones and carried away into the sodium hydroxide scrubbers. In this study a radio-frequency glow discharge optical emission spectrometer (RF-GDOES) was used for determining the concentration of Se along the 56 cm Te zone-refined bar. It was observed that the initial concentration of 1100 ppb Se was decreased to 30 ppb after 2 cycles.

  10. The effects of air pollution regulations on the US refining industry. Task 3

    SciTech Connect (OSTI)

    Not Available

    1989-06-01

    Numerous air pollution regulations affecting petroleum refineries recently have been promulgated, have been proposed, or are under consideration at the federal, state, and local level. As shown in Figure ES-1, all of these environmental regulations are intended to take effect over the relatively short time period from 1989 through 1995. In the aggregate these regulatory activities have significant implications for the US refining industry and the Nation, including: Major investment requirements; changes in industry profitability; potential closure of some refineries; and potential changes in crude oil or product import dependence. At issue is whether the cumulative effect of these regulations could so adversely affect the US refining industry that US national security would be affected. In addition to the regulations outlined in Figure ES-1, President Bush recently presented a major new plan to improve the nation`s air quality. The aspects of the President`s plan that could strongly affect US refineries are summarized below.

  11. Report to the Congress on the storage of refined petroleum products and on regional supply interruptions

    SciTech Connect (OSTI)

    Not Available

    1991-06-01

    This report describes petroleum and petroleum products storage and supply disruption. Information is presented under the following topics: Historical Perspective; Current Patterns of Supply and Disposition of Petroleum Products in the Primary Distribution System; PADD I Clean Products Supply/Demand; 1990 Regional Petroleum Reserve Annual Computation; Market Infrastructure and Commercial Practices in the California Motor Gasoline Market, as Related to Potential Refined Petroleum Product Reserve Structures and Sales Procedures; Infrastructure and Commercial Practices in the Northeast Distillate Market, as Related to Potential Refined Petroleum Product Reserve Structures and Sales Procedures; Storage Stability Characteristics of Petroleum Products and Crude Oil; Effect of 1990 Clean Air Act Amendments on Demand for Petroleum Product Storage Capacity; and Environmental Regulations on Tanks.

  12. Implications of Increasing Light Tight Oil Production for U.S. Refining -

    U.S. Energy Information Administration (EIA) (indexed site)

    Energy Information Administration Implications of Increasing Light Tight Oil Production for U.S. Refining Release date: May 5, 2015 Revised: May 12, 2015 (revision) 1. Background and Analytical Framework Background Recent and projected increases in U.S. crude production have sparked discussion about the implications of current limitations on crude oil exports for prices, including both world and domestic crude oil and petroleum product prices, and for the level of domestic crude production

  13. Grain refinement of cast zinc through magnesium inoculation: Characterisation and mechanism

    SciTech Connect (OSTI)

    Liu, Zhilin; Qiu, Dong; Wang, Feng; Taylor, John A.; Zhang, Mingxing

    2015-08-15

    It was previously found that peritectic-forming solutes are more favourable for the grain refinement of cast Al alloys than eutectic-forming solutes. In this work, we report that the eutectic-forming solute, Mg, can also significantly grain refine cast Zn. Differential thermal analysis (DTA) of a Zn–Mg alloy, in which efficient grain refinement occurred, evidenced an unexpected peak that appeared before the nucleation of η-Zn grains on the DTA spectrum. Based on extensive examination using X-ray diffraction, high resolution SEM and EDS, it was found that: (a) some faceted Zn–Mg intermetallic particles were reproducibly observed; (b) the particles were located at or near grain centres; (c) the atomic ratio of Mg to Zn in the intermetallic compound was determined to be around 1/2. Using tilting selected area diffraction (SAD) and convergent beam Kikuchi line diffraction pattern (CBKLDP) techniques, these faceted particles were identified as MgZn{sub 2} and an orientation relationship between such grain-centred MgZn{sub 2} particles and the η-Zn matrix was determined. Hence, the unexpected peak on the DTA spectrum is believed to correspond to the formation of MgZn{sub 2} particles, which act as effective heterogeneous nucleation sites in the alloy. Together with the effect of Mg solute on restricting grain growth, such heterogeneous nucleation is cooperatively responsible for the grain size reduction in Zn–Mg alloys. - Highlights: • A new eutectic-based grain refiner for the cast Zn was found. • The formation process of an intermetallic compound (MgZn{sub 2}) was characterised. • MgZn{sub 2} can act as potent heterogeneous nucleation sites above the liquidus. • A new OR between MgZn{sub 2} and η-Zn was determined using the CBKLDP technique.

  14. Application of a catalyst deactivation model for hydrotreating solvent refined coal feedstocks

    SciTech Connect (OSTI)

    Nalitham, R.V.

    1983-10-01

    A simple kinetic model, including a first-order catalyst deactivation rate, is applied to upgrading of coal-derived feedstocks prepared from two solvent refined coal fractions. A catalyst deactivation mechanism is proposed which involves the adsorption and surface reaction of coke precursors on catalytic active sites. The effect of feedstock composition, temperature and pressure on kinetic parameters, and in particular the catalyst deactivation rate, is determined.

  15. NREL Refines Method to Convert Lignin to Nylon Precursor - News Releases |

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    NREL NREL Refines Method to Convert Lignin to Nylon Precursor Recent Findings Published in Energy & Environmental Science February 26, 2015 A new study from the Energy Department's National Renewable Energy Laboratory (NREL) demonstrates the conversion of lignin-derived compounds to adipic acid, an important industrial dicarboxylic acid produced for its use as a precursor to nylon, plasticizers, lubricants, polyesters, and other popular products and chemicals. The demonstration is an

  16. Refined BCF-type boundary conditions for mesoscale surface step dynamics

    DOE PAGES-Beta [OSTI]

    Zhao, Renjie; Ackerman, David M.; Evans, James W.

    2015-06-24

    Deposition on a vicinal surface with alternating rough and smooth steps is described by a solid-on-solid model with anisotropic interactions. Kinetic Monte Carlo (KMC) simulations of the model reveal step pairing in the absence of any additional step attachment barriers. We explore the description of this behavior within an analytic Burton-Cabrera-Frank (BCF)-type step dynamics treatment. Without attachment barriers, conventional kinetic coefficients for the rough and smooth steps are identical, as are the predicted step velocities for a vicinal surface with equal terrace widths. However, we determine refined kinetic coefficients from a two-dimensional discrete deposition-diffusion equation formalism which accounts for stepmore » structure. These coefficients are generally higher for rough steps than for smooth steps, reflecting a higher propensity for capture of diffusing terrace adatoms due to a higher kink density. Such refined coefficients also depend on the local environment of the step and can even become negative (corresponding to net detachment despite an excess adatom density) for a smooth step in close proximity to a rough step. Incorporation of these refined kinetic coefficients into a BCF-type step dynamics treatment recovers quantitatively the mesoscale step-pairing behavior observed in the KMC simulations.« less

  17. Refined BCF-type boundary conditions for mesoscale surface step dynamics

    SciTech Connect (OSTI)

    Zhao, Renjie; Ackerman, David M.; Evans, James W.

    2015-06-24

    Deposition on a vicinal surface with alternating rough and smooth steps is described by a solid-on-solid model with anisotropic interactions. Kinetic Monte Carlo (KMC) simulations of the model reveal step pairing in the absence of any additional step attachment barriers. We explore the description of this behavior within an analytic Burton-Cabrera-Frank (BCF)-type step dynamics treatment. Without attachment barriers, conventional kinetic coefficients for the rough and smooth steps are identical, as are the predicted step velocities for a vicinal surface with equal terrace widths. However, we determine refined kinetic coefficients from a two-dimensional discrete deposition-diffusion equation formalism which accounts for step structure. These coefficients are generally higher for rough steps than for smooth steps, reflecting a higher propensity for capture of diffusing terrace adatoms due to a higher kink density. Such refined coefficients also depend on the local environment of the step and can even become negative (corresponding to net detachment despite an excess adatom density) for a smooth step in close proximity to a rough step. Incorporation of these refined kinetic coefficients into a BCF-type step dynamics treatment recovers quantitatively the mesoscale step-pairing behavior observed in the KMC simulations.

  18. Source category survey: secondary copper smelting and refining industry. Final report Oct 79-Jan 80

    SciTech Connect (OSTI)

    Snyder, M.K.; Shobe, F.D.

    1980-05-01

    This report presents the results of a survey of the secondary copper smelting and refining industry to determine the probable impact of the development of new source performance standards under Section 111 of the Clean Air Act. The surveyed industry processes copper scrap to produce pure copper or copper alloy, other than brass and bronze. Secondary copper foundries, which melt and cast high-quality copper scrap without refining it, are excluded. Primary copper smelters and refiners, which produce copper from ore, are also excluded, although they also process copper scrap. Process, emissions, and economic data were gathered by literature searches, contacts with representatives of the industry, trade associations, federal government agencies, and state and local air pollution control agencies, and visits to two plants. The industry's production processes, actual and allowable air emissions, and emission control systems are described. State and local emission regulations are compared. Production and capacity are projected to 1989 and the impact of new source performance standards is assessed.

  19. The value of continuity: Refined isogeometric analysis and fast direct solvers

    DOE PAGES-Beta [OSTI]

    Garcia, Daniel; Pardo, David; Dalcin, Lisandro; Paszynski, Maciej; Collier, Nathan; Calo, Victor M.

    2016-08-24

    Here, we propose the use of highly continuous finite element spaces interconnected with low continuity hyperplanes to maximize the performance of direct solvers. Starting from a highly continuous Isogeometric Analysis (IGA) discretization, we introduce C0-separators to reduce the interconnection between degrees of freedom in the mesh. By doing so, both the solution time and best approximation errors are simultaneously improved. We call the resulting method “refined Isogeometric Analysis (rIGA)”. To illustrate the impact of the continuity reduction, we analyze the number of Floating Point Operations (FLOPs), computational times, and memory required to solve the linear system obtained by discretizing themore » Laplace problem with structured meshes and uniform polynomial orders. Theoretical estimates demonstrate that an optimal continuity reduction may decrease the total computational time by a factor between p2 and p3, with pp being the polynomial order of the discretization. Numerical results indicate that our proposed refined isogeometric analysis delivers a speed-up factor proportional to p2. In a 2D mesh with four million elements and p=5, the linear system resulting from rIGA is solved 22 times faster than the one from highly continuous IGA. In a 3D mesh with one million elements and p=3, the linear system is solved 15 times faster for the refined than the maximum continuity isogeometric analysis.« less

  20. Re-refinement from deposited X-ray data can deliver improved models for most PDB entries

    SciTech Connect (OSTI)

    Joosten, Robbie P.; Womack, Thomas; Vriend, Gert; Bricogne, Gérard

    2009-02-01

    An evaluation of validation and real-space intervention possibilities for improving existing automated (re-)refinement methods. The deposition of X-ray data along with the customary structural models defining PDB entries makes it possible to apply large-scale re-refinement protocols to these entries, thus giving users the benefit of improvements in X-ray methods that have occurred since the structure was deposited. Automated gradient refinement is an effective method to achieve this goal, but real-space intervention is most often required in order to adequately address problems detected by structure-validation software. In order to improve the existing protocol, automated re-refinement was combined with structure validation and difference-density peak analysis to produce a catalogue of problems in PDB entries that are amenable to automatic correction. It is shown that re-refinement can be effective in producing improvements, which are often associated with the systematic use of the TLS parameterization of B factors, even for relatively new and high-resolution PDB entries, while the accompanying manual or semi-manual map analysis and fitting steps show good prospects for eventual automation. It is proposed that the potential for simultaneous improvements in methods and in re-refinement results be further encouraged by broadening the scope of depositions to include refinement metadata and ultimately primary rather than reduced X-ray data.

  1. EA-98-A Western Systems Power Pool | Department of Energy

    Energy Savers

    energy to Canada PDF icon EA-98-A Western Systems Power Pool More Documents & Publications EA-364 Noble Americas Gas & Power Corporation EA-098 Western Systems Power Pool EA-98-I...

  2. Western New York Energy LLC | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Western New York Energy LLC Jump to: navigation, search Name: Western New York Energy LLC Place: Medina, New York Zip: 14103 Product: Developed a 50m gallon ethanol plant in...

  3. Western Wind and Solar Integration Study Phase 2: Preprint

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Western Wind and Solar Integration Study Phase 2 Preprint D. Lew, G. Brinkman, E. Ibanez, ... consumer waste. 1 The Western Wind and Solar Integration Study Phase 2 D. Lew, G. ...

  4. Western Wind and Solar Integration Study: Hydropower Analysis...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Western Wind and Solar Integration Study: Hydropower Analysis October 2007 - October 2010 ... DE-AC36-08GO28308 Western Wind and Solar Integration Study: Hydropower Analysis T. Acker ...

  5. The Western Wind and Solar Integration Study Phase 2: Executive...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Operated by the Alliance for Sustainable Energy, LLC THE WESTERN WIND AND SOLAR INTEGRATION STUDY PHASE 2: Executive Summary i THE WESTERN WIND AND SOLAR INTEGRATION STUDY PHASE 2: ...

  6. New Geothermal Prospects in the Western United States Show Promise...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Geothermal Prospects in the Western United States Show Promise New Geothermal Prospects in the Western United States Show Promise February 27, 2013 - 2:21pm Addthis New geothermal ...

  7. VEE-0040- In the Matter of Western Star Propane, Inc.

    Energy.gov [DOE]

    On February 18, 1997, Western Star Propane, Inc. (Western) filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). In its application,...

  8. Near-term acceleration of hydroclimatic change in the western...

    Office of Scientific and Technical Information (OSTI)

    Near-term acceleration of hydroclimatic change in the western U.S. Citation Details In-Document Search Title: Near-term acceleration of hydroclimatic change in the western U.S. ...

  9. Utilities Dist-Western IN REMC | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Utilities Dist-Western IN REMC Jump to: navigation, search Name: Utilities Dist-Western IN REMC Place: Indiana References: EIA Form EIA-861 Final Data File for 2010 - File1a1...

  10. A communication infrastructure for South Western Electricity

    SciTech Connect (OSTI)

    Newbury, J.

    1996-07-01

    In response to deregulation, many UK Regional Electricity Companies (RECs) are currently considering redesigning their communication infrastructure to meet this and other business requirements. This paper presents a proposed communication infrastructure for South Western Electricity plc. The Company services a wide variety of customers in the South West of England. The supporting technology, REC and customer benefits, together with valued added services (VAS) will be addressed.

  11. Tropical Western Pacific: A Year in Darwin

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Pacific: A Year in Darwin C. N. Long, J. H. Mather, and S. A. McFarlane Pacific Northwest National Laboratory Richland, Washington L. Jones, W. M. Porch, and A. Haruta Los Alamos National Laboratory Los Alamos, New Mexico Introduction In March 2002, the third Tropical Western Pacific (TWP) Atmospheric Radiation Measurement (ARM) site was installed adjacent to the international airport in Darwin, Australia (12.42 S latitude, 130.89 E longitude; Figure 1). Darwin is located on the northwest coast

  12. Western States Shale Production (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update

    Western States Shale Production (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 2000's 0 0 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 11/19/2015 Next Release Date: 12/31/2016 Referring Pages: Shale Gas Production

  13. Western Area Power Administration Transmission Infrastructure Program

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    TIP Program Overview Craig Knoell, Program Manager November 2009 TIP PROGRAM OVERVIEW Implement Section 402 of the American Recovery & Reinvestment Act Identify, prioritize and participate in the study, facilitation, financing, planning, operating, maintaining, and construction of new or upgraded transmission facilities Borrowing authority of $3.25 billion 2 TIP PROGRAM OVERVIEW (CONT'D) Have one terminus within area served by Western Deliver, or facilitate the delivery of, power generated

  14. Secretary Bodman Promotes Energy Bill to Western Governors | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Promotes Energy Bill to Western Governors Secretary Bodman Promotes Energy Bill to Western Governors March 1, 2005 - 10:37am Addthis WASHINGTON, DC - U.S. Secretary of Energy Samuel W. Bodman in a speech before the Western Governors Association today expressed the need for Congress to pass comprehensive energy legislation and highlighted the benefits of the proposal for the western United States. Secretary Bodman also discussed a number of important energy initiatives including:

  15. 2012 Annual Planning Summary for Western Area Power Administration

    Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2012 and 2013 within Western Area Power Administration.

  16. Keynote Address to the Western Governors' Association 2016 Annual Meeting

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    -- As Delivered | Department of Energy to the Western Governors' Association 2016 Annual Meeting -- As Delivered Keynote Address to the Western Governors' Association 2016 Annual Meeting -- As Delivered June 14, 2016 - 3:06pm Addthis Secretary Moniz's Keynote Address to the Western Governors' Association 2016 Annual Meeting Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy Well, thank you. I had planned to say how pleased I was to be back with the Western Governors' Association.

  17. 2014 Annual Planning Summary for the Western Area Power Administration

    Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2014 and 2015 within the Western Area Power Administration.

  18. Western Riverside Council of Governments - Large Commercial PACE...

    Energy.gov (indexed) [DOE]

    State California Program Type PACE Financing Summary Western Riverside Council of Governments (WRCOG) is offering business owners in WRCOG participating...

  19. Categorical Exclusion Determinations: Western Area PowerAdministratio...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Colorado River Storage Project Management Center Categorical Exclusion Determinations: Western Area Power Administration-Colorado River Storage Project Management Center ...

  20. Notices DEPARTMENT OF ENERGY Western Area Power Administration

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    076 Federal Register / Vol. 81, No. 72 / Thursday, April 14, 2016 / Notices DEPARTMENT OF ENERGY Western Area Power Administration [DOE/EIS-0474] Southline Transmission Line Project Environmental Impact Statement AGENCY: Western Area Power Administration, DOE. ACTION: Record of decision. SUMMARY: The Western Area Power Administration (Western) and the U.S. Bureau of Land Management (BLM), acting as joint lead agencies, issued the Proposed Southline Transmission Line Project (Project) Final

  1. RTG resource book for western states and provinces: Final proceedings

    SciTech Connect (OSTI)

    1994-12-31

    The Western Interstate Energy Board held a workshop and liaison activities among western states, provinces, and utilities on the formation of Regional Transmission Groups (RTGs). Purpose of the activities was to examine the policy implications for western states and provinces in the formation of RTGs in the West, the implications for western ratepayers and utilities of the RTG formation and potential impacts of RTGs on the western electricity system. The workshop contributed to fulfilling the transmission access and competition objectives of Title VII of the Energy Policy Act of 1992.

  2. Steam system opportunity assessment for the pulp and paper, chemical manufacturing, and petroleum refining industries: Main report

    SciTech Connect (OSTI)

    None, None

    2002-10-01

    This report assesses steam generation and use in the pulp and paper, chemical, and petroleum refining industries, and estimates the potential for energy savings from implementation of steam system performance and efficiency improvements.

  3. Evaluation of tropical channel refinement using MPAS-A aquaplanet simulations

    SciTech Connect (OSTI)

    Martini, Matus N.; Gustafson, Jr., William I.; O'Brien, Travis A.; Ma, Po -Lun

    2015-09-13

    Climate models with variable-resolution grids offer a computationally less expensive way to provide more detailed information at regional scales and increased accuracy for processes that cannot be resolved by a coarser grid. This study uses the Model for Prediction Across Scales–Atmosphere (MPAS22A), consisting of a nonhydrostatic dynamical core and a subset of Advanced Research Weather Research and Forecasting (ARW-WRF) model atmospheric physics that have been modified to include the Community Atmosphere Model version 5 (CAM5) cloud fraction parameterization, to investigate the potential benefits of using increased resolution in an tropical channel. The simulations are performed with an idealized aquaplanet configuration using two quasi-uniform grids, with 30 km and 240 km grid spacing, and two variable-resolution grids spanning the same grid spacing range; one with a narrow (20°S–20°N) and one with a wide (30°S–30°N) tropical channel refinement. Results show that increasing resolution in the tropics impacts both the tropical and extratropical circulation. Compared to the quasi-uniform coarse grid, the narrow-channel simulation exhibits stronger updrafts in the Ferrel cell as well as in the middle of the upward branch of the Hadley cell. The wider tropical channel has a closer correspondence to the 30 km quasi-uniform simulation. However, the total atmospheric poleward energy transports are similar in all simulations. The largest differences are in the low-level cloudiness. The refined channel simulations show improved tropical and extratropical precipitation relative to the global 240 km simulation when compared to the global 30 km simulation. All simulations have a single ITCZ. Furthermore, the relatively small differences in mean global and tropical precipitation rates among the simulations are a promising result, and the evidence points to the tropical channel being an effective method for avoiding the extraneous numerical artifacts seen in earlier

  4. Direct Reduction of Waste through Refining of DOE Metal Assets - 13632

    SciTech Connect (OSTI)

    Hargett, Michael C.; Terekhov, Dimitri; Khozan, Kamran M.

    2013-07-01

    CVMR{sup R} presents a technology for refining nickel from the enrichment barrier materials of the DOE that is proven through 100 years of use by the metals industry. CVMR{sup R} applies modern controls, instrumentation for process and monitoring of the system, and innovative production methods to produce a wide spectrum of products that generate new technology applications and improvements to our society and economy. CVMR{sup R} will receive barrier materials as a secure operation and size reduce the metal to a shred that is fed to a carbonylation reactor where nickel is reacted with carbon monoxide and generate nickel carbonyl. The carbonyl will be filtered and decomposed with heat to form a variety of products that include high value nano powders, coated substrates, net shapes and pure nickel. The residue from the reactor will retain radionuclides from enrichment activities. The carbon monoxide will only react and extract nickel under the operating conditions to leave volumetric contamination in the unreacted residue. A demonstration plant was designed and built by CVMR{sup R} and operated by BWXT, to demonstrate the systems capabilities to DOE in 2006. A pilot plant operation precedes the detailed design of the nickel refinery and provides essential data for design, safe work practices, waste characterizations and system kinetics and confirms the project feasibility. CVMR{sup R} produces nickel products that are cleaner than the nickel in U.S. commerce and used by industry today. The CVMR{sup R} process and systems for nickel refining is well suited for DOE materials and will provide value through environmental stewardship, recovery of high value assets, and support of the DOE environmental remediation programs as the refined nickel generates additional long term benefits to local communities. (authors)

  5. Evaluation of Tropical Channel Refinement using MPAS-A Aquaplanet Simulations

    SciTech Connect (OSTI)

    Martini, Matus; Gustafson, William I.; O'Brien, Travis A.; Ma, Po-Lun

    2015-09-13

    Climate models with variable-resolution grids offer a computationally less expensive way to provide more detailed information at regional scales and increased accuracy for processes that cannot be resolved by a coarser grid. This study uses the Model for Prediction Across Scales–Atmosphere (MPAS22A), consisting of a nonhydrostatic dynamical core and a subset of Advanced Research Weather Research and Forecasting (ARW-WRF) model atmospheric physics that have been modified to include the Community Atmosphere Model version 5 (CAM5) cloud fraction parameterization, to investigate the potential benefits of using increased resolution in an tropical channel. The simulations are performed with an idealized aquaplanet configuration using two quasi-uniform grids, with 30 km and 240 km grid spacing, and two variable-resolution grids spanning the same grid spacing range; one with a narrow (20°S–20°N) and one with a wide (30°S–30°N) tropical channel refinement. Results show that increasing resolution in the tropics impacts both the tropical and extratropical circulation. Compared to the quasi-uniform coarse grid, the narrow-channel simulation exhibits stronger updrafts in the Ferrel cell as well as in the middle of the upward branch of the Hadley cell. The wider tropical channel has a closer correspondence to the 30 km quasi-uniform simulation. However, the total atmospheric poleward energy transports are similar in all simulations. The largest differences are in the low-level cloudiness. The refined channel simulations show improved tropical and extratropical precipitation relative to the global 240 km simulation when compared to the global 30 km simulation. All simulations have a single ITCZ. The relatively small differences in mean global and tropical precipitation rates among the simulations are a promising result, and the evidence points to the tropical channel being an effective method for avoiding the extraneous numerical artifacts seen in earlier studies that

  6. Manufacturing Energy and Carbon Footprint - Sector: Petroleum Refining (NAICS 324110), October 2012 (MECS 2006)

    Energy.gov (indexed) [DOE]

    Petroleum Refining (NAICS 324110) Process Energy Electricity and Steam Generation Losses Process Losses 245 Nonprocess Losses 3,546 641 Steam Distribution Losses 145 20 Nonprocess Energy 2,994 Electricity Generation Steam Generation 3,546 110 Prepared for the Advanced Manufacturing Office (AMO) by Energetics Incorporated 62 2,779 127 Generation and Transmission Losses Generation and Transmission Losses 41 275 Onsite Generation 2,840 2,304 927 3,231 402 151 682 9.6 24.3 33.8 64.7 64.3 144.5 176.0

  7. Methods of refining and producing dibasic esters and acids from natural oil feedstocks

    DOE Patents [OSTI]

    Snead, Thomas E.; Cohen, Steven A.; Gildon, Demond L.

    2016-03-15

    Methods are provided for refining natural oil feedstocks and producing dibasic esters and/or dibasic acids. The methods comprise reacting a terminal olefin with an internal olefin in the presence of a metathesis catalyst to form a dibasic ester and/or dibasic acid. In certain embodiments, the olefin esters are formed by reacting the feedstock in the presence of a metathesis catalyst under conditions sufficient to form a metathesized product comprising olefins and esters, separating the olefins from the esters in the metathesized product, and transesterifying the esters in the presence of an alcohol to form a transesterified product having olefin esters.

  8. MX-2500 thermal processor for the treatment of petroleum refining wastes and contaminated soils

    SciTech Connect (OSTI)

    Swanberg, C. )

    1993-05-01

    Separation and Recovery Systems, Inc. (SRS) of Irvine, California is the market leader in supplying hazardous waste and secondary material dewatering and drying services to the petroleum refining industry. In late 1991, SRS introduced the new generation of dryer technology, the MX-2500. The MX-2500 is an electrically heated dryer system that recovers virtually all of the hydrocarbon value of refinery wastes and secondary materials, while producing a solid residue meeting EPA Land Disposal Restriction (LDR) treatment levels which allows the refinery to land dispose of the solids, thereby realizing two objectives: waste minimization and oil recovery/recycling. 2 figs., 3 tabs.

  9. Managing process innovation through incremental improvements: Empirical evidence in the petroleum refining industry

    SciTech Connect (OSTI)

    Yin, J.Z.

    1994-11-01

    This paper developed a present value index (PVI) model to offer a new solution to differing the effects of radical innovation and incremental improvement. After comparing the return from an initial-radical-process innovation and the return from the incremental changes in petroleum refining processes, it was found that incremental improvements generated higher returns than from its initial innovations. The findings suggest that, in contrast to a conventional research and development (R&D) strategy with a focus on state-of-art innovations, manufacturing companies should place sufficient emphasis on incremental capital and operating improvements to fully exploit economic benefits from an innovation. 49 refs., 3 tabs.

  10. Refinement of overlapping local/global iteration method based on Monte Carlo/p-CMFD calculations

    SciTech Connect (OSTI)

    Jo, Y.; Yun, S.; Cho, N. Z.

    2013-07-01

    In this paper, the overlapping local/global (OLG) iteration method based on Monte Carlo/p-CMFD calculations is refined in two aspects. One is the consistent use of estimators to generate homogenized scattering cross sections. Another is that the incident or exiting angular interval is divided into multi-angular bins to modulate albedo boundary conditions for local problems. Numerical tests show that, compared to the one angle bin case in a previous study, the four angle bin case shows significantly improved results. (authors)

  11. Quantitative phase analysis of Mg:ZrO{sub 2} nanoparticles by Rietveld refinement method

    SciTech Connect (OSTI)

    Balaji, V. Senthilkumaran, S. Thangadurai, P.

    2014-04-24

    To quantify the structural phases of nanocrystalline ZrO{sub 2} doped with Mg ions of varying concentrations (3, 5, 10, 15 and 20%) and annealed at different temperatures. Magnesia doped zirconia was prepared by chemical co-precipitation method and annealed up to 1000°C. The monoclinic and tetragonal phases present in Mg:ZrO{sub 2} were quantified using Rietveld refinement analysis of the X-ray diffraction data and compared with the Direct method based on peak intensity calculations. Tetragonal phase was dominant in the 600°C annealed Mg:ZrO{sub 2} for all Mg concentrations.

  12. Table 3a. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual

    U.S. Energy Information Administration (EIA) (indexed site)

    a. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual" "Projected Price in Constant Dollars" " (constant dollars per barrel in ""dollar year"" specific to each AEO)" ,"AEO $ Year",1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013 "AEO 1994",1992,16.69,16.42999,16.9899,17.66,18.28,19.0599,19.89,20.72,21.65,22.61,23.51,24.29,24.9,25.6,26.3,27,27.64,28.16

  13. European refiners must seek creative processes to justify heavy-ends projects

    SciTech Connect (OSTI)

    Hunt, P.

    1996-12-09

    There are strong reasons for wanting to upgrade the bottom of the crude oil barrel. But European refiners will not find it easy to get approval and funding for major capital investment projects. In most cases, investment justification will have to be creative and may need to rely on factors traditionally considered to be outside the conventional refinery fence. Examples of such creative upgrading schemes are those employed in four gasification projects planned for refineries in Italy. It is clear that the major obstacles to heavy residue processing are not technical, but economic. A review of these obstacles will set the stage for European investment in bottom-of-the-barrel processing.

  14. Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Petroleum Refining

    SciTech Connect (OSTI)

    Sabine Brueske, Caroline Kramer, Aaron Fisher

    2015-06-01

    Energy bandwidth studies of U.S. manufacturing sectors can serve as foundational references in framing the range (or bandwidth) of potential energy savings opportunities. This bandwidth study examines energy consumption and potential energy savings opportunities in U.S. petroleum refining. The study relies on multiple sources to estimate the energy used in nine individual process areas, representing 68% of sector-wide energy consumption. Energy savings opportunities for individual processes are based on technologies currently in use or under development; these potential savings are then extrapolated to estimate sector-wide energy savings opportunity.

  15. Methods of refining and producing dibasic esters and acids from natural oil feedstocks

    SciTech Connect (OSTI)

    Snead, Thomas E; Cohen, Steven A; Gildon, Demond L

    2015-04-07

    Methods are provided for refining natural oil feedstocks and producing dibasic esters and/or dibasic acids. The methods comprise reacting a terminal olefin with an internal olefin in the presence of a metathesis catalyst to form a dibasic ester and/or dibasic acid. In certain embodiments, the olefin esters are formed by reacting the feedstock in the presence of a metathesis catalyst under conditions sufficient to form a metathesized product comprising olefins and esters, separating the olefins from the esters in the metathesized product, and transesterifying the esters in the presence of an alcohol to form a transesterified product having olefin esters.

  16. ,"U.S. Refiner Acquisition Cost of Crude Oil"

    U.S. Energy Information Administration (EIA) (indexed site)

    Acquisition Cost of Crude Oil" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Refiner Acquisition Cost of Crude Oil",3,"Monthly","9/2016","1/15/1974" ,"Release Date:","11/1/2016" ,"Next Release Date:","12/1/2016" ,"Excel File

  17. Low enthalpy convective system in Western Ohio

    SciTech Connect (OSTI)

    Cannon, M.S.; Tabet, C.A.; Eckstein, Y.

    1980-01-01

    A distinct positive anomaly in the temperatures of the shallow (Pleistocene) aquifers along the Cincinnati-Findlay Arch in Western Ohio coincides with a low geothermal gradient. A conceptual model of convective currents associated with a tensional fault and/or fracture system along the crest of the Arch is suggested as an explanation of the anomaly. Hydrochemical information indicates that various quantities of warmer ground water, with the composition characteristics of deep bedrock aquifers, is present as an admixture in the shallow aquifers. This confirms the conceptual model of convection in fractures.

  18. Innovative secondary support technologies for western mines

    SciTech Connect (OSTI)

    Barczak, T.M.; Molinda, G.M.

    1996-12-01

    With the development of the shield support, the primary requirement for successful ground control in longwall mining is to provide stable gate road and bleeder entries. Wood cribbing has been the dominant form of secondary support. However, the cost and limited availability of timber, along with the poor performance of softwood crib supports, has forced western U.S. mines to explore the utilization of other support systems. The recent success of cable bolts has engendered much interest from western operators. Several innovative freestanding support systems have been developed recently including: (1) {open_quotes}The Can{close_quotes} support by Burrell Mining Products International, Inc., (2) Hercules and Link-N-Lock wood cribs and Propsetter by Strata Products (USA) Inc., (3) Variable Yielding Crib and Power Crib supports by Mountainland Support Systems, (4) the Confined Core Crib developed by Southern Utah Fuels Corporation; and (5) the MEGA prop by MBK Hydraulik. This paper assesses design considerations and compares the performance and application of these alternative secondary support systems.

  19. Molecular dynamics force-field refinement against quasi-elastic neutron scattering data

    DOE PAGES-Beta [OSTI]

    Borreguero Calvo, Jose M.; Lynch, Vickie E.

    2015-11-23

    Quasi-elastic neutron scattering (QENS) is one of the experimental techniques of choice for probing the dynamics at length and time scales that are also in the realm of full-atom molecular dynamics (MD) simulations. This overlap enables extension of current fitting methods that use time-independent equilibrium measurements to new methods fitting against dynamics data. We present an algorithm that fits simulation-derived incoherent dynamical structure factors against QENS data probing the diffusive dynamics of the system. We showcase the difficulties inherent to this type of fitting problem, namely, the disparity between simulation and experiment environment, as well as limitations in the simulationmore » due to incomplete sampling of phase space. We discuss a methodology to overcome these difficulties and apply it to a set of full-atom MD simulations for the purpose of refining the force-field parameter governing the activation energy of methyl rotation in the octa-methyl polyhedral oligomeric silsesquioxane molecule. Our optimal simulated activation energy agrees with the experimentally derived value up to a 5% difference, well within experimental error. We believe the method will find applicability to other types of diffusive motions and other representation of the systems such as coarse-grain models where empirical fitting is essential. In addition, the refinement method can be extended to the coherent dynamic structure factor with no additional effort.« less

  20. Decontamination of metals by melt refining/slagging: First year progress report

    SciTech Connect (OSTI)

    Mizia, R.E.; Worcester, S.A.; Twidwell, L.G.; Paolini, D.J.; Weldon, T.A.

    1994-03-01

    As the number of nuclear installations undergoing decontamination and decommissioning (D&D) increases, current radioactive waste storage space is consumed and establishment of new waste storage areas becomes increasingly difficult. The problem of handling and storing radioactive scrap metal (RSM) gains increasing importance in the DOE Environmental Restoration and Waste Management Program. To alleviate present and future waste storage problems, Westinghouse Idaho Nuclear Company (WINCO) is managing a program for the recycling of RSM for beneficial use within the DOE complex. As part of that effort, Montana Tech has been awarded a contract to help optimize melting and refining technologies for the recycling of stainless steel RSM. The scope of the Montana Tech program includes a literature survey, a decontaminating slag design study, small scale melting studies to determine optimum slag compositions for removal of radioactive contaminant surrogates, analysis of preferred melting techniques, and coordination of pilot scale melting demonstrations (100-500 lbs) to be conducted at selected commercial facilities. This program will identify methods that can be used to recycle stainless steel RSM which will be used to fabricate high and low level waste canisters for the Idaho Waste Immobilization Facility. This report summarizes the results of an extensive literature review and the first year`s progress on slag design, small-scale melt refining of surrogate-containing stainless steel (presently only a three month effort), and pilot-scale preparation of surrogate master ingots.

  1. Projected refined product balances in key Latin American countries: A preliminary examination

    SciTech Connect (OSTI)

    1996-06-01

    Over the years, the East-West Center (EWC) has developed considerable expertise in refinery modeling, especially in the area of forecasting product balances for countries, given planned capacity changes, changes in product demand, changes in crude slates, and changes in product specifications. This expertise has been applied on an ongoing basis to the major refiners in the Middle East and the Asia-Pacific region, along with the US West Coast as region in its own right. Refinery modeling in these three areas has been ongoing for nearly 15 years at the Center, and the tools and information sources are now well developed. To date, the EWC has not applied these tools to Latin America. Although research on Latin America has been an ongoing area of concern at the Center in recent years, the information gathered to date is still not of the level of detail nor quality available for other areas. The modeling efforts undertaken in this report are of a ``baseline`` nature, designed to outline the major issues, attempt a first cut at emerging product balances, and, above all, to elicit commentary from those directly involved in the oil industry in the key countries modeled. Our experience in other regions has shown that it takes a few years dialogue with refiners and government planner in individual countries to develop a reliable database, as well as the insights into operational constraints and practices that make accurate modeling possible. This report is no more than a first step down the road.

  2. Molecular dynamics force-field refinement against quasi-elastic neutron scattering data

    SciTech Connect (OSTI)

    Borreguero Calvo, Jose M.; Lynch, Vickie E.

    2015-11-23

    Quasi-elastic neutron scattering (QENS) is one of the experimental techniques of choice for probing the dynamics at length and time scales that are also in the realm of full-atom molecular dynamics (MD) simulations. This overlap enables extension of current fitting methods that use time-independent equilibrium measurements to new methods fitting against dynamics data. We present an algorithm that fits simulation-derived incoherent dynamical structure factors against QENS data probing the diffusive dynamics of the system. We showcase the difficulties inherent to this type of fitting problem, namely, the disparity between simulation and experiment environment, as well as limitations in the simulation due to incomplete sampling of phase space. We discuss a methodology to overcome these difficulties and apply it to a set of full-atom MD simulations for the purpose of refining the force-field parameter governing the activation energy of methyl rotation in the octa-methyl polyhedral oligomeric silsesquioxane molecule. Our optimal simulated activation energy agrees with the experimentally derived value up to a 5% difference, well within experimental error. We believe the method will find applicability to other types of diffusive motions and other representation of the systems such as coarse-grain models where empirical fitting is essential. In addition, the refinement method can be extended to the coherent dynamic structure factor with no additional effort.

  3. Conformation-dependent backbone geometry restraints set a new standard for protein crystallographic refinement

    SciTech Connect (OSTI)

    Moriarty, Nigel W.; Tronrud, Dale E.; Adams, Paul D.; Karplus, P. Andrew

    2014-06-17

    Ideal values of bond angles and lengths used as external restraints are crucial for the successful refinement of protein crystal structures at all but the highest of resolutions. The restraints in common usage today have been designed based on the assumption that each type of bond or angle has a single ideal value independent of context. However, recent work has shown that the ideal values are, in fact, sensitive to local conformation, and as a first step toward using such information to build more accurate models, ultra-high resolution protein crystal structures have been used to derive a conformation-dependent library (CDL) of restraints for the protein backbone (Berkholz et al. 2009. Structure. 17, 1316). Here, we report the introduction of this CDL into the Phenix package and the results of test refinements of thousands of structures across a wide range of resolutions. These tests show that use of the conformation dependent library yields models that have substantially better agreement with ideal main-chain bond angles and lengths and, on average, a slightly enhanced fit to the X-ray data. No disadvantages of using the backbone CDL are apparent. In Phenix usage of the CDL can be selected by simply specifying the cdl=True option. This successful implementation paves the way for further aspects of the context-dependence of ideal geometry to be characterized and applied to improve experimental and predictive modelling accuracy.

  4. Conformation-dependent backbone geometry restraints set a new standard for protein crystallographic refinement

    DOE PAGES-Beta [OSTI]

    Moriarty, Nigel W.; Tronrud, Dale E.; Adams, Paul D.; Karplus, P. Andrew

    2014-06-17

    Ideal values of bond angles and lengths used as external restraints are crucial for the successful refinement of protein crystal structures at all but the highest of resolutions. The restraints in common usage today have been designed based on the assumption that each type of bond or angle has a single ideal value independent of context. However, recent work has shown that the ideal values are, in fact, sensitive to local conformation, and as a first step toward using such information to build more accurate models, ultra-high resolution protein crystal structures have been used to derive a conformation-dependent library (CDL)more » of restraints for the protein backbone (Berkholz et al. 2009. Structure. 17, 1316). Here, we report the introduction of this CDL into the Phenix package and the results of test refinements of thousands of structures across a wide range of resolutions. These tests show that use of the conformation dependent library yields models that have substantially better agreement with ideal main-chain bond angles and lengths and, on average, a slightly enhanced fit to the X-ray data. No disadvantages of using the backbone CDL are apparent. In Phenix usage of the CDL can be selected by simply specifying the cdl=True option. This successful implementation paves the way for further aspects of the context-dependence of ideal geometry to be characterized and applied to improve experimental and predictive modelling accuracy.« less

  5. Solvent Refined Coal (SRC) process. Quarterly technical progress report, January 1979-March 1979

    SciTech Connect (OSTI)

    Not Available

    1980-02-01

    This report summarizes the progress of the Solvent Refined Coal (SRC) Project by the Pittsburg and Midway Coal Mining Co. for the Department of Energy for the period January 1, 1979 to March 31, 1979. Activities included the operation and modification of the Solvent Refined Coal Pilot Plant at Fort Lewis, Washington; the Process Development Unit P-99 at Harmarville, Pennsylvania; and research at Merriam Laboratory in Merriam, Kansas. The Pilot Plant processed Powhatan No. 5 Coal in the SRC-II mode of operation studying the effect of coal particle size and system temperature on coal slurry blending and the effect of carbon monoxide concentration in the reaction feed gas on process yields. January and February were spent completing installation of a fourth High Pressure Separator on Process Development Unit P-99 to better simulate operating conditions for the proposed Demonstration Plant. During March, one run was completed at P-99 feeding Pittsburgh Seam Coal from the Powhatan No. 5 Mine. Merriam investigations included a study of the effect of iron containing additives on SRC-I operation, the addition of carbon monoxide to the feed gas, utilization of a hydrogenated solvent (Cresap process solvent) in the SRC-I mode under both normal and short residence time operating conditions, and development of a simulated distillation technique to determine the entire boiling range distribution of product oils.

  6. Secretary Moniz to Discuss Western Energy Landscape at Western Governors' Association Annual Meeting

    Energy.gov [DOE]

    On Saturday, December 6, U.S. Secretary of Energy Ernest Moniz will deliver keynote remarks at the Western Governors’ Association Winter Meeting in Las Vegas, Nevada. Secretary Moniz will discuss the energy landscape in the West and the region's role in leading the nation into a low-carbon future.

  7. Honeymoons Lead to Upgrades in Western Vermont | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Honeymoons Lead to Upgrades in Western Vermont Honeymoons Lead to Upgrades in Western Vermont Logo Neighborworks H.E.A.T. Squad. For homeowners who are hesitant to make energy efficiency upgrades, offering them a honeymoon might just be the motivation they need. NeighborWorks of Western Vermont (NWWVT) created a "honeymoon period" for its loan payments and has seen success by allowing homeowners to experience six months of comfort and energy savings before they begin making loan

  8. PROJECT PROFILE: Western Interstate Energy Board (SEEDS2-SES) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Western Interstate Energy Board (SEEDS2-SES) PROJECT PROFILE: Western Interstate Energy Board (SEEDS2-SES) Project Name: Enhanced Distributed Solar Photovoltaic Deployment via Barrier Mitigation or Removal in the Western Interconnection Funding Opportunity: Solar Energy Evolution and Diffusion Studies 2 - State Energy Strategies (SEEDS2-SES) SunShot Subprogram: Soft Costs Location: Denver, CO SunShot Award Amount: $2,020,000 Awardee Cost Share: $505,000 This project with the

  9. Energy Efficiency in Western Utility Resource Plans Implications for

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Regional Assessments and Initiatives | Department of Energy in Western Utility Resource Plans Implications for Regional Assessments and Initiatives Energy Efficiency in Western Utility Resource Plans Implications for Regional Assessments and Initiatives Project scope: Comparative analysis of recent resource plans filed by 14 utilities in the Western U.S. and Canada. Analyze treatment of conventional & emerging resource options-including energy efficiency (EE)-Assess risk analysis &

  10. Department of Energy Announces Start of Western Area Power Administration

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Recovery Act Project | Department of Energy Start of Western Area Power Administration Recovery Act Project Department of Energy Announces Start of Western Area Power Administration Recovery Act Project September 16, 2009 - 12:00am Addthis WASHINGTON, DC - With the goal of bringing new jobs and green power to the West, Energy Secretary Steven Chu announced today a large-scale transmission project to be financed using funding from the American Recovery and Reinvestment Act. The Western Area

  11. National Electric Transmission Study 2006 Western Interconnection Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Western Interconnection 2006 Congestion Assessment Study Prepared by the Western Congestion Analysis Task Force May 08, 2006 2 Western Interconnection 2006 Congestion Study - DOE Task 3 - 1. 2008 Modeling Study 2. 2015 Modeling Study - 2015 Planned Resource Development (IRPs and RPS) 3. W.I. Historical Path Usage Studies - 1999 thru 2005 - Physical congestion - Commercial congestion 3 WCATF Modeling Studies ABB Gridview Model * Model uses WECC 2005 L&R load forecast, modified with NPCC data

  12. New Geothermal Prospects in the Western United States Show Promise |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Geothermal Prospects in the Western United States Show Promise New Geothermal Prospects in the Western United States Show Promise February 27, 2013 - 2:21pm Addthis New geothermal prospects in the western United States show promise, according to the new 2013 Annual U.S. Geothermal Power Production and Development Report, published by the Geothermal Energy Association this week. With an estimate of more than 500 Megawatts of new potential in Oregon alone, industry leader

  13. Western Wind and Solar Integration Study | Grid Modernization | NREL

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Western Wind and Solar Integration Study Can we integrate large amounts of wind and solar energy into the electric power system of the West? That's the question explored by the Western Wind and Solar Integration Study, one of the largest such regional studies to date. Phase 1 Research During its first phase, the Western Wind and Solar Integration Study (WWSIS) investigated the benefits and challenges of integrating up to 35% wind and solar energy in the WestConnect subregion and, more broadly,

  14. Western Area Power Administration (WAPA) - Overview and Collaboration with Tribes

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Resources: Supporting Customer Energy Choices DOE Tribal Energy Program Review LaVerne Kyriss Western Area Power Administration November 17, 2008 2 Western overview * Markets 10,000 MW of hydropower * 15 states * 671 wholesale power customers - 87 tribes * Marketing plans, rates are project-specific * Power rates are cost-based and lower than other generation sources * No load growth responsibility-but we purchase energy to firm up hydro contractual commitments 3 Western's Service Territory

  15. Western Energy Corridor -- Energy Resource Report

    SciTech Connect (OSTI)

    Leslie Roberts; Michael Hagood

    2011-06-01

    The world is facing significant growth in energy demand over the next several decades. Strategic in meeting this demand are the world-class energy resources concentrated along the Rocky Mountains and northern plains in Canada and the U.S., informally referred to as the Western Energy Corridor (WEC). The fossil energy resources in this region are rivaled only in a very few places in the world, and the proven uranium reserves are among the world's largest. Also concentrated in this region are renewable resources contributing to wind power, hydro power, bioenergy, geothermal energy, and solar energy. Substantial existing and planned energy infrastructure, including refineries, pipelines, electrical transmission lines, and rail lines provide access to these resources.

  16. Evaluation of tropical channel refinement using MPAS-A aquaplanet simulations

    DOE PAGES-Beta [OSTI]

    Martini, Matus N.; Gustafson, Jr., William I.; O'Brien, Travis A.; Ma, Po -Lun

    2015-09-13

    Climate models with variable-resolution grids offer a computationally less expensive way to provide more detailed information at regional scales and increased accuracy for processes that cannot be resolved by a coarser grid. This study uses the Model for Prediction Across Scales–Atmosphere (MPAS22A), consisting of a nonhydrostatic dynamical core and a subset of Advanced Research Weather Research and Forecasting (ARW-WRF) model atmospheric physics that have been modified to include the Community Atmosphere Model version 5 (CAM5) cloud fraction parameterization, to investigate the potential benefits of using increased resolution in an tropical channel. The simulations are performed with an idealized aquaplanet configurationmore » using two quasi-uniform grids, with 30 km and 240 km grid spacing, and two variable-resolution grids spanning the same grid spacing range; one with a narrow (20°S–20°N) and one with a wide (30°S–30°N) tropical channel refinement. Results show that increasing resolution in the tropics impacts both the tropical and extratropical circulation. Compared to the quasi-uniform coarse grid, the narrow-channel simulation exhibits stronger updrafts in the Ferrel cell as well as in the middle of the upward branch of the Hadley cell. The wider tropical channel has a closer correspondence to the 30 km quasi-uniform simulation. However, the total atmospheric poleward energy transports are similar in all simulations. The largest differences are in the low-level cloudiness. The refined channel simulations show improved tropical and extratropical precipitation relative to the global 240 km simulation when compared to the global 30 km simulation. All simulations have a single ITCZ. Furthermore, the relatively small differences in mean global and tropical precipitation rates among the simulations are a promising result, and the evidence points to the tropical channel being an effective method for avoiding the extraneous numerical artifacts seen in

  17. NorthWestern Energy (Gas)- Commercial Energy Efficiency Rebate Program

    Energy.gov [DOE]

    NorthWestern Energy offers multiple rebate programs for commercial and industrial customers to make energy efficient improvements to their businesses. Incentives are available for heating,...

  18. Categorical Exclusion Determinations: Western Area PowerAdministratio...

    Energy Savers

    ... Offices(s): Western Area Power Administration-Desert Southwest Region March 23, 2015 CX-013526: Categorical Exclusion Determination Herbicide Application at 51 Substations Located ...

  19. Secretary Bodman Praises Western States' "Frontier Line" | Department...

    Office of Environmental Management (EM)

    Secretary Bodman Praises Western States' "Frontier Line" April 5, 2005 - 11:30am Addthis WASHINGTON, DC - Secretary of Energy Samuel W. Bodman today released the following ...

  20. FORESTRY COLORADO WESTERN POWER ADMIN POC Cheryl Drake Telephone

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    FORESTRY COLORADO WESTERN POWER ADMIN POC Cheryl Drake Telephone (720) 962-7154 Email drake@wapa.gov Timber tract operations 113110 Cutting and transporting timber 113310 GEORGIA ...

  1. Case Western Reserve University's Institute for Advanced Materials...

    Open Energy Information (Open El) [EERE & EIA]

    Reserve University's Institute for Advanced Materials Jump to: navigation, search Name: The Institute for Advanced Materials at Case Western Reserve University Address: 2061...

  2. Western New York Sustainable Energy Association | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Sustainable Energy Association Jump to: navigation, search Name: Western New York Sustainable Energy Association Address: 27 St. Catherine's Court Place: Buffalo, New York Zip:...

  3. NorthWestern Energy (Gas)- Residential Energy Efficiency Rebate Program

    Energy.gov [DOE]

    NorthWestern Energy offers a variety of rebates for residential customers to make energy efficiency improvements in their existing homes. Incentives are available for heating equipment, insulation,...

  4. Energy Department's Fossil Energy Chief to Tour Western Michigan...

    Office of Environmental Management (EM)

    University's Clean Coal Research Facilities, Host Business Roundtable Energy Department's Fossil Energy Chief to Tour Western Michigan University's Clean Coal Research ...

  5. United Nations Economic and Social Commission for Western Asia...

    Open Energy Information (Open El) [EERE & EIA]

    Background Membership "ESCWA comprises 14 Arab countries in Western Asia: Bahrain, Egypt, Iraq, Jordan, Kuwait, Lebanon, Oman, Qatar, Saudi Arabia, Sudan, Syria, United Arab...

  6. Renewable Energy Network of Entrepreneurs in Western New York...

    Open Energy Information (Open El) [EERE & EIA]

    York RENEW NY Jump to: navigation, search Name: Renewable Energy Network of Entrepreneurs in Western New York (RENEW NY) Place: Rochester, New York Zip: 14623 Sector: Renewable...

  7. Western Water and Power Production WWPP | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Water and Power Production WWPP Jump to: navigation, search Name: Western Water and Power Production (WWPP) Place: Albuquerque, New Mexico Zip: 88340 Sector: Biomass Product:...

  8. Western Pacific; Gas line plans continue to increase

    SciTech Connect (OSTI)

    Quarles, W.R.; Thiede, K.; Parent, L.

    1990-11-01

    The authors report on pipeline activity in the Western Pacific. They discuss projects underway in Australia, Indonesia, Malaysia, New Zealand, Papua New Guinea, and Singapore.

  9. Energy Efficiency in Western Utility Resource Plans Implications...

    Energy.gov (indexed) [DOE]

    Project scope: Comparative analysis of recent resource plans filed by 14 utilities in the Western U.S. and Canada. Analyze treatment of conventional & emerging resource ...

  10. Final Report on Transmission Pricing in the Western Interconnection

    SciTech Connect (OSTI)

    Douglas C. Larson; Lawrence Nordell

    2003-06-25

    Under this project, the Committee on Regional Electric Power Cooperation (CREPC) of the Western Interstate Energy Board developed a ''western pricing and congestion management proposal'' in order to foster efficient wholesale power markets and efficient use and expansion of the transmission grid. Drafts of this paper provided useful information to states/provinces in the Western Interconnection as Western Regional Transmission Organization (RTO) transmission pricing proposals have continued to evolve. Throughout the project there has been a gradual, but incomplete agreement on pricing systems to be used by RTOs in the West.

  11. 2013 Annual Planning Summary for the Western Area Power Administration

    Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2013 and 2014 within the Western Area Power Administration.

  12. OE Releases "Transmission Constraints and Congestion in the Western...

    Energy.gov (indexed) [DOE]

    "Transmission Constraints and Congestion in the Western and Eastern Interconnections, 2009-2012" document, which is now available for downloading, is a compilation of...

  13. NREL: Transmission Grid Integration - Eastern and Western Wind...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Eastern and Western Wind Integration Datasets These datasets were designed to help energy professionals perform wind ... Studies Glossary News Did you find what you needed? ...

  14. Promotion of Rural Renewable Energy in Western China | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Energy in Western China Place: Beijing Municipality, China Zip: 100026 Sector: Bioenergy Product: A programme launched by China Association of Rural Energy Industry (CAREI)...

  15. Transmission Siting in the Western United States | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: Transmission Siting in the Western United StatesPermittingRegulatory...

  16. Notices DEPARTMENT OF ENERGY Western Area Power Administration

    Energy.gov (indexed) [DOE]

    DEPARTMENT OF ENERGY Western Area Power Administration DEPARTMENT OF THE INTERIOR Fish and Wildlife Service Notice of Availability for Upper Great Plains Wind Energy Final...

  17. BLM - Western BLM Bird Species of Conservation Concern List ...

    Open Energy Information (Open El) [EERE & EIA]

    BLM - Western BLM Bird Species of Conservation Concern List Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - Checklist: BLM -...

  18. 2011 Annual Planning Summary for Western Area Power Administration (WAPA)

    Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2011 and 2012 within the Western Area Power Administration (WAPA).

  19. Inspection of Power Purchase Contracts at the Western Area Power...

    Energy Savers

    ... for Procurement and Financial Assistance stated in a ... and Assistance Management and the Administrator, ... are contained in a handbook titled WESTERN AREA POWER ...

  20. Energy Efficiency in Western Utility Resource Plans: Impacts...

    Office of Scientific and Technical Information (OSTI)

    Energy Efficiency in Western Utility Resource Plans: Impacts onRegional Resources Assessment and Support for WGA Policies Citation Details In-Document Search Title: Energy ...

  1. Energy and Water in the Western and Texas Interconnects

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    in the Western and Texas Interconnects - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future ...

  2. Early F-type stars - refined classification, confrontation with Stromgren photometry, and the effects of rotation

    SciTech Connect (OSTI)

    Gray, R.O.; Garrison, R.F.

    1989-02-01

    The classification for early F-type stars in the MK spectral classification system presented by Gray and Garrison (1987) is refined. The effect of rotation on spectral classification and ubvy-beta photometry of early F-type stars is examined. It is found that the classical luminosity criterion, the 4417 A/4481 A ratio gives inconsistent results. It is shown that most of the stars in the Delta Delphini class of metallic-line stars are either normal or are indistinguishable from proto-Am stars. It is suggested that the designation Delta Delphini should be dropped. The classifications are compared with Stromgren photometry. The effects of rotation on the delta-c sub 1 index in the early-F field dwarfs is demonstrated. 55 references.

  3. On the Computation of Integral Curves in Adaptive Mesh Refinement Vector Fields

    SciTech Connect (OSTI)

    Deines, Eduard; Weber, Gunther H.; Garth, Christoph; Van Straalen, Brian; Borovikov, Sergey; Martin, Daniel F.; Joy, Kenneth I.

    2011-06-27

    Integral curves, such as streamlines, streaklines, pathlines, and timelines, are an essential tool in the analysis of vector field structures, offering straightforward and intuitive interpretation of visualization results. While such curves have a long-standing tradition in vector field visualization, their application to Adaptive Mesh Refinement (AMR) simulation results poses unique problems. AMR is a highly effective discretization method for a variety of physical simulation problems and has recently been applied to the study of vector fields in flow and magnetohydrodynamic applications. The cell-centered nature of AMR data and discontinuities in the vector field representation arising from AMR level boundaries complicate the application of numerical integration methods to compute integral curves. In this paper, we propose a novel approach to alleviate these problems and show its application to streamline visualization in an AMR model of the magnetic field of the solar system as well as to a simulation of two incompressible viscous vortex rings merging.

  4. Effects of gas injection condition on mixing efficiency in the ladle refining process

    SciTech Connect (OSTI)

    Pan, S.M.; Chiang, J.D.; Hwang, W.S.

    1997-02-01

    The aim of this research was to investigate the effects of injection condition on the mixing efficiency of the gas injection treatment of the ladle refining process in steelmaking. A water modeling approach was employed. A NaCl solution was injected into the vessel and the electric conductivity value of the water solution was measured to represent the concentration of the additive. The results of this investigation reveal that up to a certain level, mixing efficiency is improved as the gas flow rate increases. Off-center injection is better than centerline injection. However, the injection lance should not be too close to the wall. Also, mixing efficiency is improved when the submerged depth of the immersion lance increases. The immersion hood has a optimal size as far as mixing efficiency is concerned. A larger or smaller hood would reduce its efficiency. The submerged depth of the immersion hood should be kept to a minimum to improve mixing efficiency.

  5. 3D Adaptive Mesh Refinement Simulations of Pellet Injection in Tokamaks

    SciTech Connect (OSTI)

    R. Samtaney; S.C. Jardin; P. Colella; D.F. Martin

    2003-10-20

    We present results of Adaptive Mesh Refinement (AMR) simulations of the pellet injection process, a proven method of refueling tokamaks. AMR is a computationally efficient way to provide the resolution required to simulate realistic pellet sizes relative to device dimensions. The mathematical model comprises of single-fluid MHD equations with source terms in the continuity equation along with a pellet ablation rate model. The numerical method developed is an explicit unsplit upwinding treatment of the 8-wave formulation, coupled with a MAC projection method to enforce the solenoidal property of the magnetic field. The Chombo framework is used for AMR. The role of the E x B drift in mass redistribution during inside and outside pellet injections is emphasized.

  6. Lance for fuel and oxygen injection into smelting or refining furnace

    DOE Patents [OSTI]

    Schlichting, M.R.

    1994-12-20

    A furnace for smelting iron ore and/or refining molten iron is equipped with an overhead pneumatic lance, through which a center stream of particulate coal is ejected at high velocity into a slag layer. An annular stream of nitrogen or argon enshrouds the coal stream. Oxygen is simultaneously ejected in an annular stream encircling the inert gas stream. The interposition of the inert gas stream between the coal and oxygen streams prevents the volatile matter in the coal from combusting before it reaches the slag layer. Heat of combustion is thus more efficiently delivered to the slag, where it is needed to sustain the desired reactions occurring there. A second stream of lower velocity oxygen can be delivered through an outermost annulus to react with carbon monoxide gas rising from slag layer, thereby adding still more heat to the furnace. 7 figures.

  7. Lance for fuel and oxygen injection into smelting or refining furnace

    DOE Patents [OSTI]

    Schlichting, Mark R.

    1994-01-01

    A furnace 10 for smelting iron ore and/or refining molten iron 20 is equipped with an overhead pneumatic lance 40, through which a center stream of particulate coal 53 is ejected at high velocity into a slag layer 30. An annular stream of nitrogen or argon 51 enshrouds the coal stream. Oxygen 52 is simultaneously ejected in an annular stream encircling the inert gas stream 51. The interposition of the inert gas stream between the coal and oxygen streams prevents the volatile matter in the coal from combusting before it reaches the slag layer. Heat of combustion is thus more efficiently delivered to the slag, where it is needed to sustain the desired reactions occurring there. A second stream of lower velocity oxygen can be delivered through an outermost annulus 84 to react with carbon monoxide gas rising from slag layer 30, thereby adding still more heat to the furnace.

  8. Table 3a. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual

    U.S. Energy Information Administration (EIA) (indexed site)

    a. Imported Refiner Acquisition Cost of Crude Oil, Projected vs. Actual Projected Price in Constant Dollars (constant dollars per barrel in "dollar year" specific to each AEO) AEO $ Year 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 AEO 1994 1992 16.69 16.43 16.99 17.66 18.28 19.06 19.89 20.72 21.65 22.61 23.51 24.29 24.90 25.60 26.30 27.00 27.64 28.16 AEO 1995 1993 14.90 16.41 16.90 17.45 18.00 18.53 19.13 19.65 20.16 20.63

  9. Methods of refining natural oils and methods of producing fuel compositions

    DOE Patents [OSTI]

    Firth, Bruce E; Kirk, Sharon E; Gavaskar, Vasudeo S

    2015-11-04

    A method of refining a natural oil includes: (a) providing a feedstock that includes a natural oil; (b) reacting the feedstock in the presence of a metathesis catalyst to form a metathesized product that includes olefins and esters; (c) passivating residual metathesis catalyst with an agent selected from the group consisting of phosphorous acid, phosphinic acid, and a combination thereof; (d) separating the olefins in the metathesized product from the esters in the metathesized product; and (e) transesterifying the esters in the presence of an alcohol to form a transesterified product and/or hydrogenating the olefins to form a fully or partially saturated hydrogenated product. Methods for suppressing isomerization of olefin metathesis products produced in a metathesis reaction, and methods of producing fuel compositions are described.

  10. Methods of refining natural oils, and methods of producing fuel compositions

    DOE Patents [OSTI]

    Firth, Bruce E.; Kirk, Sharon E.

    2015-10-27

    A method of refining a natural oil includes: (a) providing a feedstock that includes a natural oil; (b) reacting the feedstock in the presence of a metathesis catalyst to form a metathesized product that includes olefins and esters; (c) passivating residual metathesis catalyst with an agent that comprises nitric acid; (d) separating the olefins in the metathesized product from the esters in the metathesized product; and (e) transesterifying the esters in the presence of an alcohol to form a transesterified product and/or hydrogenating the olefins to form a fully or partially saturated hydrogenated product. Methods for suppressing isomerization of olefin metathesis products produced in a metathesis reaction, and methods of producing fuel compositions are described.

  11. A technical and economic assessment of petroleum, heavy oil, shale oil and coal liquid refining

    SciTech Connect (OSTI)

    Sikonia, J.G.; Shah, B.R.; Ulowetz, M.A.

    1983-11-01

    Decreasing availability of conventional crude oil will result in the utilization of alternative raw materials for the production of transportation fuels. Based on currently available processes and as a result of detailed pilot plant studies, the differences in the technical and economic aspects of refining alternative feedstocks of heavy oil, coal liquids and shale oil have indicated that heavy, hydrogen-deficient materials require more complex and costly upgrading techniques. Compared to the base case of Arabian Light crude oil, the Mexican Maya heavy oil is worth about $4.35/B less, the coal liquid about $2.38/B less and the shale oil about $5.98/B less. All of these alternative fuels can be upgraded into high quality transportation fuels.

  12. Solvent-refined-coal (SRC) process. Volume II. Sections V-XIV. Final report

    SciTech Connect (OSTI)

    Not Available

    1982-05-01

    This report documents the completion of development work on the Solvent Refined Coal Process by The Pittsburgh and Midway Coal Mining Co. The work was initiated in 1966 under Office of Coal Research, US Department of Interior, Contract No. 14-01-0001-496 and completed under US Department of Energy Contract No. DE-AC05-79ET10104. This report discusses work leading to the development of the SRC-I and SRC-II processes, construction of the Fort Lewis Pilot Plant for the successful development of these processes, and results from the operation of this pilot plant. Process design data generated on a 1 ton-per-day Process Development Unit, bench-scale units and through numerous research projects in support of the design of major demonstration plants are also discussed in summary form and fully referenced in this report.

  13. Pillowing doublets: Refining a mesh to ensure that faces share at most one edge

    SciTech Connect (OSTI)

    Mitchell, S.A.; Tautges, T.J.

    1995-11-01

    Occasionally one may be confronted by a hexahedral or quadrilateral mesh containing doublets, two faces sharing two edges. In this case, no amount of smoothing will produce a mesh with agreeable element quality: in the planar case, one of these two faces will always have an angle of at least 180 degrees between the two edges. The authors describe a robust scheme for refining a hexahedral or quadrilateral mesh to separate such faces, so that any two faces share at most one edge. Note that this also ensures that two hexahedra share at most one face in the three dimensional case. The authors have implemented this algorithm and incorporated it into the CUBIT mesh generation environment developed at Sandia National Laboratories.

  14. Methods of refining and producing isomerized fatty acid esters and fatty acids from natural oil feedstocks

    DOE Patents [OSTI]

    Snead, Thomas E.; Cohen, Steven A.; Gildon, Demond L.; Beltran, Leslie V.; Kunz, Linda A.; Pals, Tessa M.; Quinn, Jordan R; Behrends, Jr., Raymond T.; Bernhardt, Randal J.

    2016-07-05

    Methods are provided for refining natural oil feedstocks and producing isomerized esters and acids. The methods comprise providing a C4-C18 unsaturated fatty ester or acid, and isomerizing the fatty acid ester or acid in the presence of heat or an isomerization catalyst to form an isomerized fatty ester or acid. In some embodiments, the methods comprise forming a dibasic ester or dibasic acid prior to the isomerizing step. In certain embodiments, the methods further comprise hydrolyzing the dibasic ester to form a dibasic acid. In certain embodiments, the olefin is formed by reacting the feedstock in the presence of a metathesis catalyst under conditions sufficient to form a metathesized product comprising olefins and esters, separating the olefins from the esters in the metathesized product, and transesterifying the esters in the presence of an alcohol to form a transesterified product having unsaturated esters.

  15. A node-centered local refinement algorithm for poisson's equation in complex geometries

    SciTech Connect (OSTI)

    McCorquodale, Peter; Colella, Phillip; Grote, David P.; Vay, Jean-Luc

    2004-05-04

    This paper presents a method for solving Poisson's equation with Dirichlet boundary conditions on an irregular bounded three-dimensional region. The method uses a nodal-point discretization and adaptive mesh refinement (AMR) on Cartesian grids, and the AMR multigrid solver of Almgren. The discrete Laplacian operator at internal boundaries comes from either linear or quadratic (Shortley-Weller) extrapolation, and the two methods are compared. It is shown that either way, solution error is second order in the mesh spacing. Error in the gradient of the solution is first order with linear extrapolation, but second order with Shortley-Weller. Examples are given with comparison with the exact solution. The method is also applied to a heavy-ion fusion accelerator problem, showing the advantage of adaptivity.

  16. Exploratory research on solvent refined coal liquefaction. Quarterly technical progress report, April 1-June 30, 1979

    SciTech Connect (OSTI)

    1980-07-01

    This report summarizes the progress of the Exploratory Research on Solvent Refined Coal Liquefaction project by The Pittsburgh and Midway Coal Mining Company's Merriam Laboratory for the period April 1, 1979 through June 30, 1979. Experimental work included a number of short residence time runs, but discussion of that work has been delayed until a later report. Experimental work reported focuses on an investigation of the decline in solvent quality experienced by the Wilsonville Pilot Plant during runs in support of the SRC I Demonstration Plant. A four run series was initiated with Wilsonville solvent; both the coal used at Wilsonville (Kentucky 6/11 - Pyro Mine) and Kentucky 9/14 coal from the Colonial Mine were used. The effect of pyrite addition to the Pyro Mine coal was investigated. No solvent quality or coking problems were experienced in the Merriam runs. Significant changes in solvent composition were apparent and equilibrated solvent samples were returned to Wilsonville for solvent quality testing.

  17. REFINING THE ASSOCIATIONS OF THE FERMI LARGE AREA TELESCOPE SOURCE CATALOGS

    SciTech Connect (OSTI)

    Massaro, F.; D’Abrusco, R.; Paggi, A.; Smith, Howard A.; Landoni, M.; Masetti, N.; Giroletti, M.; Otí-Floranes, H.; Jiménez-Bailón, E.; Chavushyan, V.; Patiño-Álvarez, V.; Digel, S. W.; Tosti, G.

    2015-03-15

    The Fermi-Large Area Telescope (LAT) First Source Catalog (1FGL) was released in 2010 February and the Fermi-LAT 2-Year Source Catalog (2FGL) appeared in 2012 April, based on data from 24 months of operation. Since they were released, many follow up observations of unidentified γ-ray sources have been performed and new procedures for associating γ-ray sources with potential counterparts at other wavelengths have been developed. Here we review and characterize all of the associations as published in the 1FGL and 2FGL catalogs on the basis of multifrequency archival observations. In particular, we located 177 spectra for the low-energy counterparts that were not listed in the previous Fermi catalogs, and in addition we present new spectroscopic observations of eight γ-ray blazar candidates. Based on our investigations, we introduce a new counterpart category of “candidate associations” and propose a refined classification for the candidate low-energy counterparts of the Fermi sources. We compare the 1FGL-assigned counterparts with those listed in 2FGL to determine which unassociated sources became associated in later releases of the Fermi catalogs. We also search for potential counterparts to all of the remaining unassociated Fermi sources. Finally, we prepare a refined and merged list of all of the associations of 1FGL plus 2FGL that includes 2219 unique Fermi objects. This is the most comprehensive and systematic study of all the associations collected for the γ-ray sources available to date. We conclude that 80% of the Fermi sources have at least one known plausible γ-ray emitter within their positional uncertainty regions.

  18. Petroleum refining industry of developed capitalist countries in the 1990s

    SciTech Connect (OSTI)

    Prokhorova, A.A.

    1994-07-01

    Crude oil is the principal source of energy today and in the immediate future. The increases in the consumption of crude oil (1.7% per year up to 2005) will be offset mainly by additional supplies from the countries of the Near East. Data on the imports of oil by the developed capitalists countries are presented in Table 2. In the United States, according to a projection made by Conoco, by the year 2000 the volume of imports will be twice the volume of domestic production; according to another prediction, the amount of Near East crude will increase from 34% in 1990 to 42% in 2000. Since the mid-1980s, the energy policy of the USA has been based on importing so-called cheap crude. Laws have been passed to mandate not only energy saving, but also cuts in the oil and gas production on U.S. territory. The volume of U.S. oil production will be 20% lower in 2000 than in 1990. Some 90% of the worldwide demand for oil is met by light and medium-density crudes, but such crudes account for only 25% of the oil resources. Projections indicate that the oil supplied to refiners in the future will be heavier and will have higher sulfur contents. The U.S. production of low-sulfur crude will drop off sharply in the next 10-15 years. The drop in oil production of the CIS [former USSR] and the consequent drop in exports from these countries will have a destabilizing effect on the world market. The average price of the {open_quotes}market basket{close_quotes} of OPEC crudes in 1991 was $149/ton (in 1990 $178/ton), in comparison with a 1992 price of $148/ton. This report presents data on refining process capacities and the ratio of secondary capacity to primary distillation capacity.

  19. Refining the site conceptual model at a former uranium mill site in Riverton, Wyoming, USA

    DOE PAGES-Beta [OSTI]

    Dam, William; Campbell, Sam; Johnson, Ray; Looney, Brian; Denham, Miles E.; Eddy-Dilek, Carol A.; Babits, Steven J.

    2015-07-07

    Milling activities at a former uranium mill site near Riverton, Wyoming, USA, contaminated the shallow groundwater beneath and downgradient of the site. Although the mill operated for <6 years (1958-1963), its impact remains an environmental liability. Groundwater modeling predicted that contaminant concentrations were declining steadily, which confirmed the conceptual site model (CSM). However, local flooding in 2010 mobilized contaminants that migrated downgradient from the Riverton site and resulted in a dramatic increase in groundwater contaminant concentrations. This observation indicated that the original CSM was inadequate to explain site conditions and needed to be refined. In response to the new observationsmore » after the flood, a collaborative investigation to better understand site conditions and processes commenced. This investigation included installing 103 boreholes to collect soil and groundwater samples, sampling and analysis of evaporite minerals along the bank of the Little Wind River, an analysis of evaportranspiration in the shallow aquifer, and sampling naturally organic-rich sediments near groundwater discharge areas. The enhanced characterization revealed that the existing CSM did not account for high uranium concentrations in groundwater remaining on the former mill site and groundwater plume stagnation near the Little Wind River. Observations from the flood and subsequent investigations indicate that additional characterization is still needed to continue refining the CSM and determine the viability of the natural flushing compliance strategy. Additional sampling, analysis, and testing of soil and groundwater are necessary to investigate secondary contaminant sources, mobilization of contaminants during floods, geochemical processes, contaminant plume stagnation, distribution of evaporite minerals and organic-rich sediments, and mechanisms and rates of contaminant transfer from soil to groundwater. Future data collection will be used to

  20. Refining the site conceptual model at a former uranium mill site in Riverton, Wyoming, USA

    SciTech Connect (OSTI)

    Dam, William; Campbell, Sam; Johnson, Ray; Looney, Brian; Denham, Miles E.; Eddy-Dilek, Carol A.; Babits, Steven J.

    2015-07-07

    Milling activities at a former uranium mill site near Riverton, Wyoming, USA, contaminated the shallow groundwater beneath and downgradient of the site. Although the mill operated for <6 years (1958-1963), its impact remains an environmental liability. Groundwater modeling predicted that contaminant concentrations were declining steadily, which confirmed the conceptual site model (CSM). However, local flooding in 2010 mobilized contaminants that migrated downgradient from the Riverton site and resulted in a dramatic increase in groundwater contaminant concentrations. This observation indicated that the original CSM was inadequate to explain site conditions and needed to be refined. In response to the new observations after the flood, a collaborative investigation to better understand site conditions and processes commenced. This investigation included installing 103 boreholes to collect soil and groundwater samples, sampling and analysis of evaporite minerals along the bank of the Little Wind River, an analysis of evaportranspiration in the shallow aquifer, and sampling naturally organic-rich sediments near groundwater discharge areas. The enhanced characterization revealed that the existing CSM did not account for high uranium concentrations in groundwater remaining on the former mill site and groundwater plume stagnation near the Little Wind River. Observations from the flood and subsequent investigations indicate that additional characterization is still needed to continue refining the CSM and determine the viability of the natural flushing compliance strategy. Additional sampling, analysis, and testing of soil and groundwater are necessary to investigate secondary contaminant sources, mobilization of contaminants during floods, geochemical processes, contaminant plume stagnation, distribution of evaporite minerals and organic-rich sediments, and mechanisms and rates of contaminant transfer from soil to groundwater. Future data collection will be used to

  1. Development of a performance-based industrial energy efficiency indicator for corn refining plants.

    SciTech Connect (OSTI)

    Boyd, G. A.; Decision and Information Sciences; USEPA

    2006-07-31

    Organizations that implement strategic energy management programs have the potential to achieve sustained energy savings if the programs are carried out properly. A key opportunity for achieving energy savings that plant managers can take is to determine an appropriate level of energy performance by comparing their plant's performance with that of similar plants in the same industry. Manufacturing facilities can set energy efficiency targets by using performance-based indicators. The U.S. Environmental Protection Agency (EPA), through its ENERGY STAR{reg_sign} program, has been developing plant energy performance indicators (EPIs) to encourage a variety of U.S. industries to use energy more efficiently. This report describes work with the corn refining industry to provide a plant-level indicator of energy efficiency for facilities that produce a variety of products--including corn starch, corn oil, animal feed, corn sweeteners, and ethanol--for the paper, food, beverage, and other industries in the United States. Consideration is given to the role that performance-based indicators play in motivating change; the steps needed to develop indicators, including interacting with an industry to secure adequate data for an indicator; and the actual application and use of an indicator when complete. How indicators are employed in the EPA's efforts to encourage industries to voluntarily improve their use of energy is discussed as well. The report describes the data and statistical methods used to construct the EPI for corn refining plants. Individual equations are presented, as are the instructions for using them in an associated Excel spreadsheet.

  2. An enriched finite element model with q-refinement for radiative boundary layers in glass cooling

    SciTech Connect (OSTI)

    Mohamed, M. Shadi; Seaid, Mohammed; Trevelyan, Jon; Laghrouche, Omar

    2014-02-01

    Radiative cooling in glass manufacturing is simulated using the partition of unity finite element method. The governing equations consist of a semi-linear transient heat equation for the temperature field and a stationary simplified P{sub 1} approximation for the radiation in non-grey semitransparent media. To integrate the coupled equations in time we consider a linearly implicit scheme in the finite element framework. A class of hyperbolic enrichment functions is proposed to resolve boundary layers near the enclosure walls. Using an industrial electromagnetic spectrum, the proposed method shows an immense reduction in the number of degrees of freedom required to achieve a certain accuracy compared to the conventional h-version finite element method. Furthermore the method shows a stable behaviour in treating the boundary layers which is shown by studying the solution close to the domain boundaries. The time integration choice is essential to implement a q-refinement procedure introduced in the current study. The enrichment is refined with respect to the steepness of the solution gradient near the domain boundary in the first few time steps and is shown to lead to a further significant reduction on top of what is already achieved with the enrichment. The performance of the proposed method is analysed for glass annealing in two enclosures where the simplified P{sub 1} approximation solution with the partition of unity method, the conventional finite element method and the finite difference method are compared to each other and to the full radiative heat transfer as well as the canonical Rosseland model.

  3. Characterization report. Bulgarian petroleum refining sector. A sector overview of capability, energy consumption, environmental impacts, May 1992. Export trade information

    SciTech Connect (OSTI)

    Adams, N.

    1992-05-01

    The objective of the report is to provide data that will serve as a basis for the modernization and optimization of the economic performance of the petroleum refining industry of Bulgaria. It addresses the current status of the petroleum refining industry so that recommendations providing low cost economies to improve energy efficiency and environmental control at each refinery can be prepared. Both short and long term improvement possibilities were established and given to the second round team for detailed evaluation. Following the collection of data on operating variables, equipment and refinery impact on the environment, a data base was prepared reflecting refinery characteristics and is the subject of a separate report.

  4. Characterization report. Romanian petroleum refining sector. A sector overview of capability, energy consumption, environmental impacts, May 1992. Export trade information

    SciTech Connect (OSTI)

    Not Available

    1992-05-01

    The objective of the report is to provide data that will serve as a basis for the modernization and optimization of the economic performance of the petroleum refining industry of Romania. The report addresses the current status of the petroleum refining industry so that recommendations providing low cost economies to improve energy efficiency and environmental control at each refinery can be prepared. Following the collection of data on operating variables, equipment, and refinery impact on the environment, a computerized data base was prepared, which is the subject of a separate report.

  5. Characterization report. Polish petroleum refining sector. A sector overview of capability, energy consumption, environmental impacts, May 1992. Export trade information

    SciTech Connect (OSTI)

    Not Available

    1992-05-01

    The objective of the report is to provide data that will serve as a basis for the modernization and optimization of the economic performance of the petroleum refining industry of Poland. The report addresses the current status of the petroleum refining industry so that recommendations providing low cost economies to improve energy efficiency and environmental control at each refinery can be prepared. Following the collection of data on operating variables, equipment, and refinery impact on the environment, a computerized database was prepared which is the subject of a separate report.

  6. Remotely Sensed Thermal Anomalies in western Colorado

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Hussein, Khalid

    2012-02-01

    Citation Information: Originator: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Publication Date: 2012 Title: Landsat Thermal Anomalies Western Edition: First Publication Information: Publication Place: Earth Science & Observation Center, Cooperative Institute for Research in Environmental Science (CIRES), University of Colorado, Boulder Publisher: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Description: This layer contains the areas identified as areas of anomalous surface temperature from Landsat satellite imagery in Western Colorado. Data was obtained for two different dates. The digital numbers of each Landsat scene were converted to radiance and the temperature was calculated in degrees Kelvin and then converted to degrees Celsius for each land cover type using the emissivity of that cover type. And this process was repeated for each of the land cover types (open water, barren, deciduous forest and evergreen forest, mixed forest, shrub/scrub, grassland/herbaceous, pasture hay, and cultivated crops). The temperature of each pixel within each scene was calculated using the thermal band. In order to calculate the temperature an average emissivity value was used for each land cover type within each scene. The NLCD 2001 land cover classification raster data of the zones that cover Colorado were downloaded from USGS site and used to identify the land cover types within each scene. Areas that had temperature residual greater than 2σ, and areas with temperature equal to 1σ to 2σ, were considered Landsat modeled very warm and warm surface exposures (thermal anomalies), respectively Spatial Domain: Extent: Top: 4546381.234113 m Left: 140556.857021 m Right: 573390.000000 m Bottom: 4094583.641581 m Contact Information: Contact Organization: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Contact Person: Khalid Hussein Address: CIRES, Ekeley Building Earth

  7. Western Grid Can Handle High Renewables in Challenging Conditions

    SciTech Connect (OSTI)

    2015-11-01

    Fact sheet outlining the key findings of Phase 3 of the Western Wind and Solar Integration Study (WWSIS-3). NREL and GE find that with good system planning, sound engineering practices, and commercially available technologies, the Western grid can maintain reliability and stability during the crucial first minute after grid disturbances with high penetrations of wind and solar power.

  8. Robert Berger > Asst. Professor - Western Washington University > Center

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Alumni > The Energy Materials Center at Cornell Robert Berger Asst. Professor - Western Washington University robert.berger@wwu.edu Formerly a member of the Neaton Group at the Lawrence Berkeley Laboratory, Robert finished his postdoc in August 2013. In September, he joined the Chemistry Department at Western Washington University

  9. Western Wind and Solar Integration Study Phase 3: Technical Overview

    SciTech Connect (OSTI)

    2015-11-01

    Technical fact sheet outlining the key findings of Phase 3 of the Western Wind and Solar Integration Study (WWSIS-3). NREL and GE find that with good system planning, sound engineering practices, and commercially available technologies, the Western grid can maintain reliability and stability during the crucial first minute after grid disturbances with high penetrations of wind and solar power.

  10. 10 Year Transmission Plan for the Western Electricity Interconnection Released

    Energy.gov [DOE]

    The Western Electricity Coordinating Council (WECC) announced the release of its first 10-Year Regional Transmission Plan (Plan) for the Western Interconnection. The Office of Electricity Delivery and Energy Reliability awarded WECC a $14.5 million grant under the American Recovery and Reinvestment Act to expand on its transmission planning activities.

  11. ASTER Thermal Anomalies in western Colorado

    SciTech Connect (OSTI)

    Zehner, Richard E.

    2013-01-01

    Citation Information: Originator: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Publication Date: 2012 Title: ASTER Thermal Anomalies Western Edition: First Publication Information: Publication Place: Earth Science & Observation Center, Cooperative Institute for Research in Environmental Science (CIRES), University of Colorado, Boulder Publisher: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Description: This layer contains the areas identified as areas of anomalous surface temperature from ASTER satellite imagery. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. Areas that had temperature greater than 2σ, and areas with temperature equal to 1σ to 2σ, were considered ASTER modeled very warm and warm surface exposures (thermal anomalies), respectively Spatial Domain: Extent: Top: 4547052.446651 m Left: 158917.090117 m Right: 4101162.228281 m Bottom: 4101162.228281 m Contact Information: Contact Organization: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Contact Person: Khalid Hussein Address: CIRES, Ekeley Building Earth Science & Observation Center (ESOC) 216 UCB City: Boulder State: CO Postal Code: 80309-0216 Country: USA Contact Telephone: 303-492-6782 Spatial Reference Information: Coordinate System: Universal Transverse Mercator (UTM) WGS’1984 Zone 13N False Easting: 500000.00000000 False Northing: 0.00000000 Central Meridian: -105.00000000 Scale Factor: 0.99960000 Latitude of Origin: 0.00000000 Linear Unit: Meter Datum: World Geodetic System ’1984 (WGS ’1984) Prime Meridian: Greenwich Angular Unit: Degree Digital Form: Format Name: Shape file

  12. Local timespace mesh refinement for simulation of elastic wave propagation in multi-scale media

    SciTech Connect (OSTI)

    Kostin, Victor; Lisitsa, Vadim; Reshetova, Galina; Tcheverda, Vladimir

    2015-01-15

    This paper presents an original approach to local timespace grid refinement for the numerical simulation of wave propagation in models with localized clusters of micro-heterogeneities. The main features of the algorithm are the application of temporal and spatial refinement on two different surfaces; the use of the embedded-stencil technique for the refinement of grid step with respect to time; the use of the Fast Fourier Transform (FFT)-based interpolation to couple variables for spatial mesh refinement. The latter makes it possible to perform filtration of high spatial frequencies, which provides stability in the proposed finite-difference schemes. In the present work, the technique is implemented for the finite-difference simulation of seismic wave propagation and the interaction of such waves with fluid-filled fractures and cavities of carbonate reservoirs. However, this approach is easy to adapt and/or combine with other numerical techniques, such as finite elements, discontinuous Galerkin method, or finite volumes used for approximation of various types of linear and nonlinear hyperbolic equations.

  13. Western Area Power Administration. Combined power system financial statements

    SciTech Connect (OSTI)

    1998-02-26

    This report presents the results of the independent certified public accountants` audit of the Western Area Power Administration`s combined power system statements of assets, Federal investment and liabilities, and the related combined statements of revenues, expenses and accumulated net revenues, and cash flows. The auditors` report on Westerns internal control structure disclosed three new reportable conditions concerning the lack of: (1) a reconciliation of stores inventory from subsidiary ledgers to summary financial information, (2) communication of interest during construction and related adjustments to interest on Federal investment, and (3) a system to prevent and detect power billing errors. None of the conditions were considered to be material weaknesses. Western provided concurrence and corrective action plans. The auditors` report on Western`s compliance with laws and regulations also disclosed two new instances of noncompliance. Western failed to calculate nonreimbursable expenses in accordance with the Grand Canyon Protection Act and had an unexplained difference in gross Federal investment balances used to calculate interest on Federal investment. Western provided concurrence and corrective action plans for the instances.

  14. Nocturnal flow on a western Colorado slope

    SciTech Connect (OSTI)

    Leone, J.M. Jr.; Gudiksen, P.H.

    1990-04-01

    The Department of Energy sponsored Atomspheric Studies in Complex Terrain (ASCOT) program has conducted a research program designed to increase our knowledge and understanding of terrain-dominated flows with specific emphasis on nocturnal flows within mountain valleys. ASCOT has sponsored both field studies and numerical modeling efforts to improve our understanding of the wind, temperature and turbulence structure of nocturnal drainage flows. One of the most recent ASCOT sponsored field studies involves a study within the Mesa Creek Basin in western Colorado to investigate the seasonal frequency of occurrence of drainage flows along the sloped surfaces and within the basin, and to evaluate the effect of the ambient meteorology on their development. The Mesa Creek Basin, situated on the north slope of the Grand Mesa, encompasses a roughly 10 {times} 20 km area that is approximately 30 km east of Grand Junction. The observational segment of the study was undertaken jointly by the Lawrence Livermore National Laboratory and the NOAA Wave Propagation Laboratory, and involved the operation of network of eight meteorological towers and a monostatic sodar within the Mesa Creek study area over a period of one year that extended from December 1988 through November 1989. These measurements were augmented by tethersonde observations to define the vertical wind and temperature structure during a few nights. The modeling portion of the study is being undertaken by Lawrence Livermore Laboratory using a three-dimensional prognostic boundary layer model to gain further insight into the dynamics of the seasonal variations and the effect of cloud cover on the development of the drainage flows. It is the purpose of this paper to present preliminary results form a numerical simulation done as part of this study. 4 refs., 7 figs.

  15. Vertical deformation at western part of Sumatra

    SciTech Connect (OSTI)

    Febriyani, Caroline Prijatna, Kosasih Meilano, Irwan

    2015-04-24

    This research tries to make advancement in GPS signal processing to estimate the interseismic vertical deformation field at western part of Sumatra Island. The data derived by Continuous Global Positioning System (CGPS) from Badan Informasi Geospasial (BIG) between 2010 and 2012. GPS Analyze at Massachusetts Institute of Technology (GAMIT) software and Global Kalman Filter (GLOBK) software are used to process the GPS signal to estimate the vertical velocities of the CGPS station. In order to minimize noise due to atmospheric delay, Vienna Mapping Function 1 (VMF1) is used as atmospheric parameter model and include daily IONEX file provided by the Center for Orbit Determination in Europe (CODE) as well. It improves GAMIT daily position accuracy up to 0.8 mm. In a second step of processing, the GLOBK is used in order to estimate site positions and velocities in the ITRF08 reference frame. The result shows that the uncertainties of estimated displacement velocity at all CGPS stations are smaller than 1.5 mm/yr. The subsided deformation patterns are seen at the northern and southern part of west Sumatra. The vertical deformation at northern part of west Sumatra indicates postseismic phase associated with the 2010 and 2012 Northern Sumatra earthquakes and also the long-term postseismic associated with the 2004 and 2005 Northern Sumatra earthquakes. The uplifted deformation patterns are seen from Bukit Tinggi to Seblat which indicate a long-term interseismic phase after the 2007 Bengkulu earthquake and 2010 Mentawai earthquake. GANO station shows a subsidence at rate 12.25 mm/yr, indicating the overriding Indo-Australia Plate which is dragged down by the subducting Southeast Asian Plate.

  16. Biocide usage in cooling towers in the electric power and petroleum refining industries

    SciTech Connect (OSTI)

    Veil, J.; Rice, J.K.; Raivel, M.E.S.

    1997-11-01

    Cooling towers users frequently apply biocides to the circulating cooling water to control growth of microorganisms, algae, and macroorganisms. Because of the toxic properties of biocides, there is a potential for the regulatory controls on their use and discharge to become increasingly more stringent. This report examines the types of biocides used in cooling towers by companies in the electric power and petroleum refining industries, and the experiences those companies have had in dealing with agencies that regulate cooling tower blowdown discharges. Results from a sample of 67 electric power plants indicate that the use of oxidizing biocides (particularly chlorine) is favored. Quaternary ammonia salts (quats), a type of nonoxidizing biocide, are also used in many power plant cooling towers. The experience of dealing with regulators to obtain approval to discharge biocides differs significantly between the two industries. In the electric power industry, discharges of any new biocide typically must be approved in writing by the regulatory agency. The approval process for refineries is less formal. In most cases, the refinery must notify the regulatory agency that it is planning to use a new biocide, but the refinery does not need to get written approval before using it. The conclusion of the report is that few of the surveyed facilities are having any difficulty in using and discharging the biocides they want to use.

  17. Synthesis and Rietveld refinement of the small-pore zeolite SSZ-16

    SciTech Connect (OSTI)

    Lobo, R.F.; Zones, S.I.; Medrud, R.C.

    1996-10-01

    Recent research efforts invested in the synthesis of new high-silica zeolites have yielded several novel materials with medium ({approximately}5.6 {Angstrom}) and large ({approximately}7.2 {Angstrom}) pores. Examples include new zeolites with intersecting 10 and 12 member rings-i.e., pores bounded by 10 and 12 tetrahedral (T) atoms respectively-like SSZ-26, NU-87, SSZ-37, SSZ-25, MCM-22, CIT-1 (CON), and the aluminophosphate-based DAF-1 (DFO). However, except for the zeolites SSZ-28 (DDR) and SSZ-13 (CHA), no new high-silica zeolites with small pores have been reported. High-silica small-pore zeolites could be potentially useful for several catalytic reactions including the synthesis of dimethylamine, the reduction of NO{sub x} from combustion gases and the dewaxing of fuels for octane upgrading. The authors present here the synthesis and structural characterization using Rietveld refinement of synchrotron X-ray powder diffraction data of the zeolite SSZ-16. 27 refs., 3 figs., 2 tabs.

  18. Refined rotational period, pole solution, and shape model for (3200) Phaethon

    SciTech Connect (OSTI)

    Ansdell, Megan; Meech, Karen J.; Kaluna, Heather; Hainaut, Olivier; Buie, Marc W.; Bauer, James; Dundon, Luke

    2014-09-20

    (3200) Phaethon exhibits both comet- and asteroid-like properties, suggesting it could be a rare transitional object such as a dormant comet or previously volatile-rich asteroid. This justifies detailed study of (3200) Phaethon's physical properties as a better understanding of asteroid-comet transition objects can provide insight into minor body evolution. We therefore acquired time series photometry of (3200) Phaethon over 15 nights from 1994 to 2013, primarily using the Tektronix 2048 2048 pixel CCD on the University of Hawaii 2.2 m telescope. We utilized light curve inversion to (1) refine (3200) Phaethon's rotational period to P = 3.6032 0.0008 hr; (2) estimate a rotational pole orientation of ? = +85 13 and ? = 20 10; and (3) derive a shape model. We also used our extensive light curve data set to estimate the slope parameter of (3200) Phaethon's phase curve as G ? 0.06, consistent with C-type asteroids. We discuss how this highly oblique pole orientation with a negative ecliptic latitude supports previous evidence for (3200) Phaethon's origin in the inner main asteroid belt as well as the potential for deeply buried volatiles fueling impulsive yet rare cometary outbursts.

  19. Refinement, Validation and Application of Cloud-Radiation Parameterization in a GCM

    SciTech Connect (OSTI)

    Dr. Graeme L. Stephens

    2009-04-30

    The research performed under this award was conducted along 3 related fronts: (1) Refinement and assessment of parameterizations of sub-grid scale radiative transport in GCMs. (2) Diagnostic studies that use ARM observations of clouds and convection in an effort to understand the effects of moist convection on its environment, including how convection influences clouds and radiation. This aspect focuses on developing and testing methodologies designed to use ARM data more effectively for use in atmospheric models, both at the cloud resolving model scale and the global climate model scale. (3) Use (1) and (2) in combination with both models and observations of varying complexity to study key radiation feedback Our work toward these objectives thus involved three corresponding efforts. First, novel diagnostic techniques were developed and applied to ARM observations to understand and characterize the effects of moist convection on the dynamical and thermodynamical environment in which it occurs. Second, an in house GCM radiative transfer algorithm (BUGSrad) was employed along with an optimal estimation cloud retrieval algorithm to evaluate the ability to reproduce cloudy-sky radiative flux observations. Assessments using a range of GCMs with various moist convective parameterizations to evaluate the fidelity with which the parameterizations reproduce key observable features of the environment were also started in the final year of this award. The third study area involved the study of cloud radiation feedbacks and we examined these in both cloud resolving and global climate models.

  20. Chemical coal cleaning process and costs refinement for coal-water slurry manufacture

    SciTech Connect (OSTI)

    Bhasin, A.K.; Berggren, M.H.; Ronzio, N.J.; Smit, F.J.

    1985-12-31

    This report describes the results of process and cost refinement studies for the manufacture of ultra-clean coal-slurry fuel for direct-fired gas turbines. The work was performed as an extension to an earlier contract in which AMAX R and D supplied METC with two lots of highly beneficiated coal slurry fuel for use in the Heat Engines program. A conceptual design study and cost estimate supplied to METC at that time indicated that a combined physical and chemical cleaning process could produce ultra-clean fuel at a competitive price. Laboratory and pilot plant studies performed for the contract extension further defined the process conditions and operating and capital costs to prepare coals containing from 0.2 to 1.0% ash as slurry fuels. A base-case fuel containing coal cleaned to 0.5% ash in a 1000 cp slurry containing 55% coal was $4.16 per million Btu when produced in quantities required to fuel a 500 MW gas-turbine generating station. Coal slurry fuel production costs as low as $3.66 per million Btu were projected for coals cleaned to 1.0% ash. 12 refs., 23 figs., 63 tabs.

  1. Solvent Refined Coal (SRC) process. Quarterly technical progress report, April 1979-June 1979

    SciTech Connect (OSTI)

    Not Available

    1980-02-01

    This report summarizes the progress of the Solvent Refined Coal (SRC) Project for the period March 25, 1979, through June 24, 1979. SRC-I turnaround activities at the Fort Lewis Pilot Plant and several other problems delayed successful startup until April 11. Slurry was injected to the Lummus Deashing Unit for the first time April 12. After approximately eight days, slurry feed was diverted because of indications that solids were accumulating in the settler vessel. The Fort Lewis Pilot Plant was shut down from April 28 to May 12, 1979, while the Lummus Unit settler vessel was hydroblasted. Cleaning of the settler vessel was complete May 10. Modifications to the unit were nearly complete at the end of the reporting period. Slurry feed to the Lummus Unit was reestablished June 15. To date, continuous production of specification product at design rates has not been achieved. One material balance run, MBR 79-1, was completed using Kentucky No. 9/14 coal at proposed design conditions for the SRC-I Demonstration Plant. Process Development Unit P-99 was on-stream for all of the second quarter of 1979, with the exception of a two-week scheduled turn-around. Six different run conditions were tested feeding Pittsburgh Seam coal from the Powhatan No. 5 Mine.

  2. Aluminum doped zirconia nanopowders: Wet-chemical synthesis and structural analysis by Rietveld refinement

    SciTech Connect (OSTI)

    Srdic, Vladimir V. Rakic, Srdan; Cvejic, Zeljka

    2008-10-02

    Alumina/zirconia nanopowders, with up to 20 mol% Al{sub 2}O{sub 3}, were prepared by wet-chemical synthesis technique, using controlled hydrolysis of alkoxides. The as-synthesized powders are amorphous, have very high specific surface area and the corresponding particle size smaller than 4 nm. Amorphous powders with 0, 10 and 20 mol% Al{sub 2}O{sub 3} crystallize at 460, 692 and 749 deg. C, respectively, as a single-phase tetragonal zirconia, without any traces of alumina phases. Rietvled refinement of X-ray diffraction data, used for the detailed structural analysis of annealed nanopowders, showed that the high-temperature zirconia phase is stabilized due to the formation of ZrO{sub 2}/Al{sub 2}O{sub 3} solid solutions. High solubility of alumina in the tetragonal zirconia (up to 28.6 at% Al{sup 3+}) and stabilization of tetragonal zirconia solid solution up to high temperature (as high as 1150 deg. C) were also confirmed.

  3. A Predictive Model of Fragmentation using Adaptive Mesh Refinement and a Hierarchical Material Model

    SciTech Connect (OSTI)

    Koniges, A E; Masters, N D; Fisher, A C; Anderson, R W; Eder, D C; Benson, D; Kaiser, T B; Gunney, B T; Wang, P; Maddox, B R; Hansen, J F; Kalantar, D H; Dixit, P; Jarmakani, H; Meyers, M A

    2009-03-03

    Fragmentation is a fundamental material process that naturally spans spatial scales from microscopic to macroscopic. We developed a mathematical framework using an innovative combination of hierarchical material modeling (HMM) and adaptive mesh refinement (AMR) to connect the continuum to microstructural regimes. This framework has been implemented in a new multi-physics, multi-scale, 3D simulation code, NIF ALE-AMR. New multi-material volume fraction and interface reconstruction algorithms were developed for this new code, which is leading the world effort in hydrodynamic simulations that combine AMR with ALE (Arbitrary Lagrangian-Eulerian) techniques. The interface reconstruction algorithm is also used to produce fragments following material failure. In general, the material strength and failure models have history vector components that must be advected along with other properties of the mesh during remap stage of the ALE hydrodynamics. The fragmentation models are validated against an electromagnetically driven expanding ring experiment and dedicated laser-based fragmentation experiments conducted at the Jupiter Laser Facility. As part of the exit plan, the NIF ALE-AMR code was applied to a number of fragmentation problems of interest to the National Ignition Facility (NIF). One example shows the added benefit of multi-material ALE-AMR that relaxes the requirement that material boundaries must be along mesh boundaries.

  4. Dimensional reduction as a tool for mesh refinement and trackingsingularities of PDEs

    SciTech Connect (OSTI)

    Stinis, Panagiotis

    2007-06-10

    We present a collection of algorithms which utilizedimensional reduction to perform mesh refinement and study possiblysingular solutions of time-dependent partial differential equations. Thealgorithms are inspired by constructions used in statistical mechanics toevaluate the properties of a system near a critical point. The firstalgorithm allows the accurate determination of the time of occurrence ofa possible singularity. The second algorithm is an adaptive meshrefinement scheme which can be used to approach efficiently the possiblesingularity. Finally, the third algorithm uses the second algorithm untilthe available resolution is exhausted (as we approach the possiblesingularity) and then switches to a dimensionally reduced model which,when accurate, can follow faithfully the solution beyond the time ofoccurrence of the purported singularity. An accurate dimensionallyreduced model should dissipate energy at the right rate. We construct twovariants of each algorithm. The first variant assumes that we have actualknowledge of the reduced model. The second variant assumes that we knowthe form of the reduced model, i.e., the terms appearing in the reducedmodel, but not necessarily their coefficients. In this case, we alsoprovide a way of determining the coefficients. We present numericalresults for the Burgers equation with zero and nonzero viscosity toillustrate the use of the algorithms.

  5. Decontamination of metals by melt refinings/slagging: An annotated bibliography

    SciTech Connect (OSTI)

    Mizia, R.E.; Worcester, S.A.; Twidwell, L.G.; Paolini, D.J.; Weldon, T.A.

    1993-07-01

    As the number of nuclear installations undergoing decontamination and decommissioning (D&D) increases, current radioactive waste storage space is consumed and establishment of new waste storage areas becomes increasingly difficult, the problem of handling and storing radioactive scrap metal (RSM) gains increasing importance in the DOE Environmental Restoration and Waste Management Program. To alleviate present and future waste storage problems, Westinghouse Idaho Nuclear Company (WINCO) is managing a program for the recycling of RSM for beneficial use within the DOE complex. As part of that effort, Montana Tech has been awarded a contract to help optimize melting and refining technology for the recycling of stainless steel RSM. The scope of the Montana Tech program includes a literature survey, a decontaminating slag design study, small scale melting studies to determine optimum slag compositions for removal of radioactive contaminant surrogates, analysis of preferred melting techniques, and coordination of large scale melting demonstrations (100--500 lbs) to be conducted at selected facilities. The program will support recycling and decontaminating stainless steel RSM for use in waste canisters for Idaho Waste Immobilization Facility densified high level waste. This report is the result of the literature search conducted to establish a basis for experimental melt/slag program development.

  6. APPLICATIONS OF LAYERED DOUBLE HYDROXIDES IN REMOVING OXYANIONS FROM OIL REFINING AND COAL MINING WASTEWATER

    SciTech Connect (OSTI)

    Song Jin; Paul Fallgren

    2006-03-01

    Western Research Institute (WRI), in conjunction with the U.S. Department of Energy (DOE), conducted a study of using the layered double hydroxides (LDH) as filter material to remove microorganisms, large biological molecules, certain anions and toxic oxyanions from various waste streams, including wastewater from refineries. Results demonstrate that LDH has a high adsorbing capability to those compounds with negative surface charge. Constituents studied include model bacteria, viruses, arsenic, selenium, vanadium, diesel range hydrocarbons, methyl tert-butyl ether (MTBE), mixed petroleum constituents, humic materials and anions. This project also attempted to modify the physical structure of LDH for the application as a filtration material. Flow characterizations of the modified LDH materials were also investigated. Results to date indicate that LDH is a cost-effective new material to be used for wastewater treatment, especially for the treatment of anions and oxyanions.

  7. Retrocausal Effects as a Consequence of Quantum Mechanics Refined to Accommodate the Principle of Sufficient Reason

    SciTech Connect (OSTI)

    Stapp, Henry P.

    2011-05-10

    The principle of sufficient reason asserts that anything that happens does so for a reason: no definite state of affairs can come into being unless there is a sufficient reason why that particular thing should happen. This principle is usually attributed to Leibniz, although the first recorded Western philosopher to use it was Anaximander of Miletus. The demand that nature be rational, in the sense that it be compatible with the principle of sufficient reason, conflicts with a basic feature of contemporary orthodox physical theory, namely the notion that nature's response to the probing action of an observer is determined by pure chance, and hence on the basis of absolutely no reason at all. This appeal to pure chance can be deemed to have no rational fundamental place in reason-based Western science. It is argued here, on the basis of the other basic principles of quantum physics, that in a world that conforms to the principle of sufficient reason, the usual quantum statistical rules will naturally emerge at the pragmatic level, in cases where the reason behind nature's choice of response is unknown, but that the usual statistics can become biased in an empirically manifest way when the reason for the choice is empirically identifiable. It is shown here that if the statistical laws of quantum mechanics were to be biased in this way then the basically forward-in-time unfolding of empirical reality described by orthodox quantum mechanics would generate the appearances of backward-time-effects of the kind that have been reported in the scientific literature.

  8. Join Us for the Clean Energy Manufacturing Initiative's Western...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Join Us for the Clean Energy Manufacturing Initiative's Western Regional Summit March 25, 2014 - 1:45pm Addthis Additive manufacturing is just one of several technologies that are ...

  9. THURSDAY: Deputy Secretary of Energy to Visit Western Area Power...

    Energy.gov (indexed) [DOE]

    the Western Area Power Administration for a ceremony at the Electrical District No. 5 Substation to view progress on the Electrical District 5-to-Palo Verde transmission project. ...

  10. The Western Wind and Solar Integration Study: The Effects of...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Wind and Solar Power- Induced Cycling on Wear-and-Tear Costs and Emissions Results From the Western Wind and Solar Integration Study Phase 2 The electric grid is a highly complex, ...

  11. AGA Western Consuming Region Natural Gas Underground Storage...

    U.S. Energy Information Administration (EIA) (indexed site)

    AGA Western Consuming Region Natural Gas Underground Storage Volume (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1994 888,010 816,597 813,746 830,132 ...

  12. DOW CHEMICAL U.S.A. + WESTERN DIVISION

    Office of Legacy Management (LM)

    DOW CHEMICAL U.S.A. + WESTERN DIVISION 2855 MITCHELL DRIVE WALNUT CREEK. CtyLlFORNlA 94598 ... cc: R.D. Axe D. L. Graham C. A. Levine AN OPEAATlNO UNIT OF ME DOW CHEMICAL COMPANY

  13. Western Red-tailed Skink Distribution in Southern Nevada

    SciTech Connect (OSTI)

    Hall, D. B. and Gergor, P. D.

    2011-11-01

    This slide show reports a study to: determine Western Red-tailed Skink (WRTS) distribution on Nevada National Security Site (NNSS); identify habitat where WRTS occur; learn more about WRTS natural history; and document distribution of other species.

  14. Helium Isotopes In Geothermal And Volcanic Gases Of The Western...

    Open Energy Information (Open El) [EERE & EIA]

    isotope ratios in gases of thirty hot springs and geothermal wells and of five natural gas wells in the western United States show no relationship to regional conductive heat...

  15. The Western Wind and Solar Integration Study Phase 2

    Energy.gov [DOE]

    Greg Brinkman will present the results of the Western Wind and Solar Integration Study (WWSIS), Phase 2. This study, which follows the first phase of WWSIS, focuses on potential emissions and wear...

  16. NREL: Transmission Grid Integration - Western Wind and Solar...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... Power Plant Cycling Costs This report examines wear-and-tear costs and impacts of cycling and ramping on fossil-fueled generators. Analysis of Cycling Costs in Western Wind and ...

  17. Western Wind and Solar Integration Study: Phase 2 (Presentation)

    SciTech Connect (OSTI)

    Lew, D.; Brinkman, G.; Ibanez, E.; Lefton, S.; Kumar, N.; Venkataraman, S.; Jordan, G.

    2013-09-01

    This presentation summarizes the scope and results of the Western Wind and Solar Integration Study Phase 2, which examined operational impacts of high penetrations of variable renewable generation in the West.

  18. Western BioEnergy Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    BioEnergy Ltd Jump to: navigation, search Name: Western BioEnergy Ltd Place: Cardiff, United Kingdom Zip: CF24 0EB Product: Developing a 13.8MW wood burning project in Margam,...

  19. Western Wind and Solar Integration Study Phase 2 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-09-01

    This is one-page, two-sided fact sheet presents high-level summary results of the Western Wind and Solar Integration Study Phase 2, which examined operational impacts of high penetrations of variable renewable generation in the West.

  20. PROJECT PROFILE: Case Western Reserve University (PREDICTS 2...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Under their PREDICTS 2 award, researchers at Case Western Reserve University will analyze data sets from over 5 million solar photovoltaic (PV) panels around the world to learn how ...

  1. ,"AGA Western Consuming Region Underground Natural Gas Storage...

    U.S. Energy Information Administration (EIA) (indexed site)

    ...282016 11:29:25 AM" "Back to Contents","Data 1: Total Underground Storage" ... Region Natural Gas in Underground Storage (Base Gas) (MMcf)","AGA Western Consuming Region ...

  2. AGA Western Consuming Region Natural Gas Underground Storage...

    U.S. Energy Information Administration (EIA) (indexed site)

    AGA Western Consuming Region Natural Gas Underground Storage Withdrawals (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1994 58,880 70,469 16,774 11,878 ...

  3. AGA Western Consuming Region Natural Gas Injections into Underground...

    U.S. Energy Information Administration (EIA) (indexed site)

    AGA Western Consuming Region Natural Gas Injections into Underground Storage (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1994 2,449 542 13,722 29,089 ...

  4. AGA Western Consuming Region Natural Gas in Underground Storage...

    U.S. Energy Information Administration (EIA) (indexed site)

    Million Cubic Feet) AGA Western Consuming Region Natural Gas in Underground Storage - ... Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1994 280,414 208,968 200,997 216,283 ...

  5. BEFORE THE HOUSE COMMITTEE ON FOREIGN AFFAIRS, SUBCOMMITTEE ON WESTERN

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    HEMISPHERE | Department of Energy Melanie Kenderdine, Director of the Office of Energy Policy and Systems Analysis Subject: Hearing to Examine the Impact of Low Oil Prices in the Western Hemisphere 6-9-16_Melanie_Kenderdine FT HFAC.pdf (181.38 KB) More Documents & Publications ORDER NO. 3465: LNG DEVELOPMENT COMPANY, LLC BEFORE THE HOUSE COMMITTEE ON FOREIGN AFFAIRS, SUBCOMMITTEE ON WESTERN HEMISPHERE Order 3690: American LNG Marketing LLC

  6. Join Us for the Clean Energy Manufacturing Initiative's Western Regional

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Summit | Department of Energy Join Us for the Clean Energy Manufacturing Initiative's Western Regional Summit Join Us for the Clean Energy Manufacturing Initiative's Western Regional Summit March 25, 2014 - 1:45pm Addthis Additive manufacturing is just one of several technologies that are being advanced by the Energy Department’s Clean Energy Manufacturing Initiative, which aims to strengthen U.S. competitiveness in the production of clean energy products | Photo by Oak Ridge National

  7. Obama Administration's Rural Tour Stops in Western Alaska | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Administration's Rural Tour Stops in Western Alaska Obama Administration's Rural Tour Stops in Western Alaska August 13, 2009 - 12:00am Addthis WASHINGTON D.C. - Four Cabinet Secretaries brought the Obama Administration's Rural Tour to rural Alaska today, with stops in Bethel and Hooper Bay, representing the largest Cabinet-level delegation to visit the state. Energy Secretary Steven Chu, Housing and Urban Development Secretary Shaun Donovan, Education Secretary Arne Duncan, and

  8. Energy and water in the Western and Texas interconnects.

    SciTech Connect (OSTI)

    Tidwell, Vincent Carroll

    2010-08-01

    The Department of Energy's Office of Electricity has initiated a $60M program to assist the electric industry in interconnection-level analysis and planning. The objective of this effort is to facilitate the development or strengthening of capabilities in each of the three interconnections serving the lower 48 states of the United States, to prepare analyses of transmission requirements under a broad range of alternative futures and develop long-term interconnection-wide transmission expansion plans. The interconnections are the Western Interconnection, the Eastern Interconnection, and the Texas Interconnection. One element of this program address the support and development of an integrated energy-water Decision Support System (DSS) that will enable planners in the Western and Texas Interconnections to analyze the potential implications of water stress for transmission and resource planning (the Eastern Interconnection is not participating in this element). Specific objectives include: (1) Develop an integrated Energy-Water Decision Support System (DSS) that will enable planners in the Western and Texas Interconnections to analyze the potential implications of water stress for transmission and resource planning. (2) Pursue the formulation and development of the Energy-Water DSS through a strongly collaborative process between members of this proposal team and the Western Electricity Coordinating Council (WECC), Western Governors Association (WGA), the Electric Reliability Council of Texas (ERCOT) and their associated stakeholder teams. (3) Exercise the Energy-Water DSS to investigate water stress implications of the transmission planning scenarios put forward by WECC, WGA, and ERCOT. The goals of this project are: (1) Develop an integrated Energy-Water Decision Support System (DSS) that will enable planners to analyze the potential implications of water stress for transmission and resource planning. (2) Pursue the formulation and development of the Energy

  9. Management and Development of the Western Resources Project

    SciTech Connect (OSTI)

    Terry Brown

    2009-03-09

    The purpose of this project was to manage the Western Resources Project, which included a comprehensive, basin-wide set of experiments investigating the impacts of coal bed methane (CBM; a.k.a. coal bed natural gas, CBNG) production on surface and groundwater in the Powder River Basin in Wyoming. This project included a number of participants including Apache Corporation, Conoco Phillips, Marathon, the Ucross Foundation, Stanford University, the University of Wyoming, Montana Bureau of Mines and Geology, and Western Research Institute.

  10. Eastern and Western Wind Integration Data Sets | Grid Modernization | NREL

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    and Western Wind Integration Data Sets The Eastern Wind Integration Data Set and Western Wind Integration Data Set were designed to perform wind integration studies and estimate power production from hypothetical wind power plants in the United States. These data sets can help energy professionals such as transmission planners, utility planners, project developers, and university researchers: Perform spatial and temporal comparisons of sites, including: Geographic diversity Load correlation

  11. Atmospheric Radiation Measurement (ARM) Data from the Tropical Western

    Office of Scientific and Technical Information (OSTI)

    Pacific (TWP) Site. () | Data Explorer Tropical Western Pacific (TWP) Site. Title: Atmospheric Radiation Measurement (ARM) Data from the Tropical Western Pacific (TWP) Site. The Atmospheric Radiation Measurement (ARM) Program is the largest global change research program supported by the U.S. Department of Energy. The primary goal of the ARM Program is to improve the treatment of cloud and radiation physics in global climate models in order to improve the climate simulation capabilities of

  12. Western States Coalbed Methane Production (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update

    Western States Coalbed Methane Production (Billion Cubic Feet) Western States Coalbed Methane Production (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 2000's 4 14 33 51 77 89 108 0 0 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 11/19/2015 Next Release Date: 12/31/2016 Referring Pages: Coalbed Methane Production

  13. PP-304 Generadora del Desierto SAde C.V. Western Area Power Administra...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4 Generadora del Desierto SAde C.V. Western Area Power Administration PP-304 Generadora del Desierto SAde C.V. Western Area Power Administration Presidential permit authorizing ...

  14. WECC releases its first-ever transmission plan for the Western Interconnection

    Energy.gov [DOE]

    The Western Electricity Coordinating Council (WECC) announced the release of its first 10-Year Regional Transmission Plan (Plan) for the Western Interconnection.

  15. Exploration for basal Silurian reservoirs in western Illinois

    SciTech Connect (OSTI)

    Whitaker, S.T.; Howard, R.H.

    1995-07-31

    The discovery of two oil fields, Kellerville and Siloam, in shallow (600--675 ft deep) basal Silurian carbonates in 1958 and 1959 respectively, was the first new production in western Illinois since the discovery of the Devonian Hoing sandstone at Colmar-Plymouth field in 1914. A second, and more major, drilling boom in western Illinois resulted from official recognition in 1982 of a significant oil discovery in basal Silurian rocks at Buckhorn East oil field, later Buckhorn Consolidated. Within a relatively short time, numerous rigs were moving into western Illinois in the hopes of repeating the successes experienced at Buckhorn East. Unfortunately, there was no adequate geologic model that explained the oil accumulations in western Illinois. Basal Silurian reservoirs in western Illinois developed due to dolomitization of carbonate that filled shallow valleys incised in the underlying Maquoketa shale. Exploration for these reservoirs should utilize all of the clues that are presented here. It will be critical to continue gathering data from the area via quality wireline logs, cores, samples, and geophysical studies. It is unlikely that the Buckhorn-Siloam-Kellerville complex is unique in western Illinois.

  16. OPEC and lower oil prices: Impacts on production capacity, export refining, domestic demand and trade balances

    SciTech Connect (OSTI)

    Fesharaki, F.; Fridley, D.; Isaak, D.; Totto, L.; Wilson, T.

    1988-12-01

    The East-West Center has received a research grant from the US Department of Energy's Office of Policy, Planning, and Analysis to study the impact of lower oil prices on OPEC production capacity, on export refineries, and petroleum trade. The project was later extended to include balance-of-payments scenarios and impacts on OPEC domestic demand. As the study progressed, a number of preliminary presentations were made at the US Department of Energy in order to receive feedback from DOE officials and to refine the focus of our analysis. During one of the presentations on June 4, 1987, the then Director of Division of Oil and Gas, John Stanley-Miller, advised us to focus our work on the Persian Gulf countries, since these countries were of special interest to the United States Government. Since then, our team has visited Iran, the United Arab Emirates, and Saudi Arabia and obtained detailed information from other countries. The political turmoil in the Gulf, the Iran/Iraq war, and the active US military presence have all worked to delay the final submission of our report. Even in countries where the United States has close ties, access to information has been difficult. In most countries, even mundane information on petroleum issues are treated as national secrets. As a result of these difficulties, we requested a one-year no cost extension to the grant and submitted an Interim Report in May 1988. As part of our grant extension request, we proposed to undertake additional tasks which appear in this report. 20 figs., 21 tabs.

  17. Petropower energia project under way in Chile promises refiner better economics at lower cost

    SciTech Connect (OSTI)

    1996-12-31

    Construction of the Republic of Chile`s first public/private industrial partnership project is well under way. Ground was broken for the $232-million Petropower Energia Limitada project early this year, shortly after the final contract between the parties - Foster Wheeler Power Systems, Inc. (FWPS); Petrox S.A. Refineria de Petroleo and Empresa Nacional del Petroleo (ENAP) - was signed. The Petropower project, located adjacent to Petrox`s 84,000-b/d refinery in Talcahuano, represents the first project ever to combine petroleum coking technology with cogeneration technology in a single project financing. Petropower is 85% owned by FWPS, 7.5% by ENAP, the Chilean national oil company and parent of Petrox S.A. When completed in mid-1998, the Petropower project will enable Petrox to refine heavier crudes and enhance the refinery`s flexibility and economics. The project will consist of a delayed coking facility (a 12,000-b/d delayed coking unit and a 7,000-b/d hydrotreating plant) and a 67-MW (59 MW net) cogeneration plant. The coke produced will fuel a Foster Wheeler proprietary-design circulating fluidized-bed (CFB) boiler which will generate all the high-pressure steam and electric power needs of the Petrox refinery. This unit will be the first circulating fluidized-bed boiler to be built in Latin America. The cogeneration facility, using limestone as a reagent and equipped with a baghouse, will control SO{sub x} emissions from combustion of the green coke fuel and easily meet all Chilean environmental standards. Moreover, by constructing the cogeneration facility, Petrox will not have to proceed with capital improvements to existing facilities to ensure a reliable source of steam and electricity, resulting in substantial savings for Petrox. The cogeneration plant provides a permanent {open_quotes}disposal{close_quotes} for all coke produced by the delayed coker, thereby solving any future problems of unwanted or excess coke.

  18. Study of deactivation and regeneration of catalysts used in the LC-fining of solvent refined coal

    SciTech Connect (OSTI)

    Curtis, C.W. (Auburn Univ., AL); Guin, J.A.; Nalitham, R.; mohsin, A.; Tarrer, A.R.; Potts, J.D.; Hastings, K.E.

    1981-03-29

    Batch experiments as well as results from LC-Fining catalytic upgrading of coal extracts indicate deactivation of the Shell 324 Ni/Mo catalyst in the presence of solvent refined coal (SRC). At increased levels of SRC loading, deactivation increases. The chief cause of catalyst deactivation appears to be coking. The Shell 324 catalyst can be substantially regenerated after the upgrading reaction by medium temperature ashing followed by presulfiding.

  19. Techno-Economic Analysis of the Deacetylation and Disk Refining Process. Characterizing the Effect of Refining Energy and Enzyme Usage on Minimum Sugar Selling Price and Minimum Ethanol Selling Price

    SciTech Connect (OSTI)

    Chen, Xiaowen; Shekiro, Joseph; Pschorn, Thomas; Sabourin, Marc; Tucker, Melvin P.; Tao, Ling

    2015-10-29

    A novel, highly efficient deacetylation and disk refining (DDR) process to liberate fermentable sugars from biomass was recently developed at the National Renewable Energy Laboratory (NREL). The DDR process consists of a mild, dilute alkaline deacetylation step followed by low-energy-consumption disk refining. The DDR corn stover substrates achieved high process sugar conversion yields, at low to modest enzyme loadings, and also produced high sugar concentration syrups at high initial insoluble solid loadings. The sugar syrups derived from corn stover are highly fermentable due to low concentrations of fermentation inhibitors. The objective of this work is to evaluate the economic feasibility of the DDR process through a techno-economic analysis (TEA). A large array of experiments designed using a response surface methodology was carried out to investigate the two major cost-driven operational parameters of the novel DDR process: refining energy and enzyme loadings. The boundary conditions for refining energy (128–468 kWh/ODMT), cellulase (Novozyme’s CTec3) loading (11.6–28.4 mg total protein/g of cellulose), and hemicellulase (Novozyme’s HTec3) loading (0–5 mg total protein/g of cellulose) were chosen to cover the most commercially practical operating conditions. The sugar and ethanol yields were modeled with good adequacy, showing a positive linear correlation between those yields and refining energy and enzyme loadings. The ethanol yields ranged from 77 to 89 gallons/ODMT of corn stover. The minimum sugar selling price (MSSP) ranged from $0.191 to $0.212 per lb of 50 % concentrated monomeric sugars, while the minimum ethanol selling price (MESP) ranged from $2.24 to $2.54 per gallon of ethanol. The DDR process concept is evaluated for economic feasibility through TEA. The MSSP and MESP of the DDR process falls within a range similar to that found with the deacetylation/dilute acid pretreatment process modeled in NREL’s 2011 design report. The DDR

  20. Techno-Economic Analysis of the Deacetylation and Disk Refining Process. Characterizing the Effect of Refining Energy and Enzyme Usage on Minimum Sugar Selling Price and Minimum Ethanol Selling Price

    DOE PAGES-Beta [OSTI]

    Chen, Xiaowen; Shekiro, Joseph; Pschorn, Thomas; Sabourin, Marc; Tucker, Melvin P.; Tao, Ling

    2015-10-29

    A novel, highly efficient deacetylation and disk refining (DDR) process to liberate fermentable sugars from biomass was recently developed at the National Renewable Energy Laboratory (NREL). The DDR process consists of a mild, dilute alkaline deacetylation step followed by low-energy-consumption disk refining. The DDR corn stover substrates achieved high process sugar conversion yields, at low to modest enzyme loadings, and also produced high sugar concentration syrups at high initial insoluble solid loadings. The sugar syrups derived from corn stover are highly fermentable due to low concentrations of fermentation inhibitors. The objective of this work is to evaluate the economic feasibilitymore » of the DDR process through a techno-economic analysis (TEA). A large array of experiments designed using a response surface methodology was carried out to investigate the two major cost-driven operational parameters of the novel DDR process: refining energy and enzyme loadings. The boundary conditions for refining energy (128–468 kWh/ODMT), cellulase (Novozyme’s CTec3) loading (11.6–28.4 mg total protein/g of cellulose), and hemicellulase (Novozyme’s HTec3) loading (0–5 mg total protein/g of cellulose) were chosen to cover the most commercially practical operating conditions. The sugar and ethanol yields were modeled with good adequacy, showing a positive linear correlation between those yields and refining energy and enzyme loadings. The ethanol yields ranged from 77 to 89 gallons/ODMT of corn stover. The minimum sugar selling price (MSSP) ranged from $0.191 to $0.212 per lb of 50 % concentrated monomeric sugars, while the minimum ethanol selling price (MESP) ranged from $2.24 to $2.54 per gallon of ethanol. The DDR process concept is evaluated for economic feasibility through TEA. The MSSP and MESP of the DDR process falls within a range similar to that found with the deacetylation/dilute acid pretreatment process modeled in NREL’s 2011 design report. The

  1. Monitoring the refinement of crystal structures with {sup 15}N solid-state NMR shift tensor data

    SciTech Connect (OSTI)

    Kalakewich, Keyton; Eloranta, Harriet; Harper, James K.; Iuliucci, Robbie; Mueller, Karl T.

    2015-11-21

    The {sup 15}N chemical shift tensor is shown to be extremely sensitive to lattice structure and a powerful metric for monitoring density functional theory refinements of crystal structures. These refinements include lattice effects and are applied here to five crystal structures. All structures improve based on a better agreement between experimental and calculated {sup 15}N tensors, with an average improvement of 47.0 ppm. Structural improvement is further indicated by a decrease in forces on the atoms by 2–3 orders of magnitude and a greater similarity in atom positions to neutron diffraction structures. These refinements change bond lengths by more than the diffraction errors including adjustments to X–Y and X–H bonds (X, Y = C, N, and O) of 0.028 ± 0.002 Å and 0.144 ± 0.036 Å, respectively. The acquisition of {sup 15}N tensors at natural abundance is challenging and this limitation is overcome by improved {sup 1}H decoupling in the FIREMAT method. This decoupling dramatically narrows linewidths, improves signal-to-noise by up to 317%, and significantly improves the accuracy of measured tensors. A total of 39 tensors are measured with shifts distributed over a range of more than 400 ppm. Overall, experimental {sup 15}N tensors are at least 5 times more sensitive to crystal structure than {sup 13}C tensors due to nitrogen’s greater polarizability and larger range of chemical shifts.

  2. Projections of the impact of expansion of domestic heavy oil production on the U.S. refining industry from 1990 to 2010. Topical report

    SciTech Connect (OSTI)

    Olsen, D.K.; Ramzel, E.B.; Strycker, A.R.; Guariguata, G.; Salmen, F.G.

    1994-12-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil (10{degrees} to 20{degrees} API gravity) production. This report provides a compendium of the United States refining industry and analyzes the industry by Petroleum Administration for Defense District (PADD) and by ten smaller refining areas. The refining capacity, oil source and oil quality are analyzed, and projections are made for the U.S. refining industry for the years 1990 to 2010. The study used publicly available data as background. A linear program model of the U.S. refining industry was constructed and validated using 1990 U.S. refinery performance. Projections of domestic oil production (decline) and import of crude oil (increases) were balanced to meet anticipated demand to establish a base case for years 1990 through 2010. The impact of additional domestic heavy oil production, (300 MB/D to 900 MB/D, originating in select areas of the U.S.) on the U.S. refining complex was evaluated. This heavy oil could reduce the import rate and the balance of payments by displacing some imported, principally Mid-east, medium crude. The construction cost for refining units to accommodate this additional domestic heavy oil production in both the low and high volume scenarios is about 7 billion dollars for bottoms conversion capacity (delayed coking) with about 50% of the cost attributed to compliance with the Clean Air Act Amendment of 1990.

  3. Western Renewable Energy Zones, Phase 1: QRA Identification Technical Report

    SciTech Connect (OSTI)

    Pletka, R.; Finn, J.

    2009-10-01

    This report describes the Western Renewable Energy Zones (WREZ) Initiative Phase 1 Qualified Resource Area identification process, including the identification and economic analysis of Qualified Resource Areas (QRAs) and 'non-REZ' resources. These data and analyses will assist the Western US in its renewable energy transmission planning goals. The economic analysis in this report produced the input data for the WREZ Generation and Transmission model, which is a screening-level model to determine the optimal routing for and cost of delivering renewable energy from QRAs to load centers throughout the Western Interconnection. In June 2009, the Western Governors' Association accepted the Western Governors' Association WREZ Phase 1 Report in which the QRAs were mapped and the entire WREZ Phase 1 process was explained in general. That same month the Lawrence Berkeley National Laboratory released the WREZ Generation and Transmission Model (GTM), which was also developed by Black & Veatch. This report details the assumptions and methodologies that were used to produce the maps and resource analyses in the WGA report as well as the economic data used by the WREZ GTM. This report also provides the results of the non-REZ resource analysis for the first time in the WREZ initiative.

  4. Categorical Exclusion Determinations: Western Area Power Administration-Colorado River Storage Project Management Center

    Energy.gov [DOE]

    Categorical Exclusion Determinations issued by Western Area Power Administration-Colorado River Storage Project Management Center.

  5. Categorical Exclusion Determinations: Western Area Power Administration-Rocky Mountain Region

    Energy.gov [DOE]

    Categorical Exclusion Determinations issued by Western Area Power Administration-Rocky Mountain Region.

  6. Categorical Exclusion Determinations: Western Area Power Administration-Sierra Nevada Region

    Energy.gov [DOE]

    Categorical Exclusion Determinations issued by Western Area Power Administration-Sierra Nevada Region.

  7. Western Wind and Solar Integration Study (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-09-01

    Initiated in 2007 to examine the operational impact of up to 35% penetration of wind, photovoltaic (PV), and concentrating solar power (CSP) energy on the electric power system, the Western Wind and Solar Integration Study (WWSIS) is one of the largest regional wind and solar integration studies to date. The goal is to understand the effects of variability and uncertainty of wind, PV, and CSP on the grid. In the Western Wind and Solar Integration Study Phase 1, solar penetration was limited to 5%. Utility-scale PV was not included because of limited capability to model sub-hourly, utility-scale PV output . New techniques allow the Western Wind and Solar Integration Study Phase 2 to include high penetrations of solar - not only CSP and rooftop PV but also utility-scale PV plants.

  8. Western Wind Strategy: Addressing Critical Issues for Wind Deployment

    SciTech Connect (OSTI)

    Douglas Larson; Thomas Carr

    2012-03-30

    The goal of the Western Wind Strategy project was to help remove critical barriers to wind development in the Western Interconnection. The four stated objectives of this project were to: (1) identify the barriers, particularly barriers to the operational integration of renewables and barriers identified by load-serving entities (LSEs) that will be buying wind generation, (2) communicate the barriers to state officials, (3) create a collaborative process to address those barriers with the Western states, utilities and the renewable industry, and (4) provide a role model for other regions. The project has been on the forefront of identifying and informing state policy makers and utility regulators of critical issues related to wind energy and the integration of variable generation. The project has been a critical component in the efforts of states to push forward important reforms and innovations that will enable states to meet their renewable energy goals and lower the cost to consumers of integrating variable generation.

  9. Integrating High Penetrations of Solar in the Western United States: Results of the Western Wind and Solar Integration Study Phase 2 (Poster)

    SciTech Connect (OSTI)

    Bird, L.; Lew, D.

    2013-10-01

    This poster presents a summary of the results of the Western Wind and Solar Integration Study Phase 2.

  10. STEM Mentors Reach Nearly 300 Western Kentucky Sixth Graders | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy STEM Mentors Reach Nearly 300 Western Kentucky Sixth Graders STEM Mentors Reach Nearly 300 Western Kentucky Sixth Graders November 25, 2015 - 12:00pm Addthis David Curry (far right) teaches Ayden Mowery, Jake Miller, and Bella Presson (left to right) at Ballard County Middle School to read a pH strip to test water. David Curry (far right) teaches Ayden Mowery, Jake Miller, and Bella Presson (left to right) at Ballard County Middle School to read a pH strip to test water. Ken Davis

  11. Western Gas Sands Project: stratigrapy of the Piceance Basin

    SciTech Connect (OSTI)

    Anderson, S.

    1980-08-01

    The Western Gas Sands Project Core Program was initiated by US DOE to investigate various low permeability, gas bearing sandstones. Research to gain a better geological understanding of these sandstones and improve evaluation and stimulation techniques is being conducted. Tight gas sands are located in several mid-continent and western basins. This report deals with the Piceance Basin in northwestern Colorado. This discussion is an attempt to provide a general overview of the Piceance Basin stratigraphy and to be a useful reference of stratigraphic units and accompanying descriptions.

  12. Study on Evaluation of Project Management Data for Decommissioning of Uranium Refining and Conversion Plant - 12234

    SciTech Connect (OSTI)

    Usui, Hideo; Izumo, Sari; Tachibana, Mitsuo; Shibahara, Yuji; Morimoto, Yasuyuki; Tokuyasu, Takashi; Takahashi, Nobuo; Tanaka, Yoshio; Sugitsue, Noritake

    2012-07-01

    Some of nuclear facilities that would no longer be required have been decommissioned in JAEA (Japan Atomic Energy Agency). A lot of nuclear facilities have to be decommissioned in JAEA in near future. To implement decommissioning of nuclear facilities, it was important to make a rational decommissioning plan. Therefore, project management data evaluation system for dismantling activities (PRODIA code) has been developed, and will be useful for making a detailed decommissioning plan for an object facility. Dismantling of dry conversion facility in the uranium refining and conversion plant (URCP) at Ningyo-toge began in 2008. During dismantling activities, project management data such as manpower and amount of waste generation have been collected. Such collected project management data has been evaluated and used to establish a calculation formula to calculate manpower for dismantling equipment of chemical process and calculate manpower for using a green house (GH) which was a temporary structure for preventing the spread of contaminants during dismantling. In the calculation formula to calculate project management data related to dismantling of equipment, the relation of dismantling manpower to each piece of equipment was evaluated. Furthermore, the relation of dismantling manpower to each chemical process was evaluated. The results showed promise for evaluating dismantling manpower with respect to each chemical process. In the calculation formula to calculate project management data related to use of the GH, relations of GH installation manpower and removal manpower to GH footprint were evaluated. Furthermore, the calculation formula for secondary waste generation was established. In this study, project management data related to dismantling of equipment and use of the GH were evaluated and analyzed. The project management data, manpower for dismantling of equipment, manpower for installation and removal of GH, and secondary waste generation from GH were considered

  13. Development of Adaptive Model Refinement (AMoR) for Multiphysics and Multifidelity Problems

    SciTech Connect (OSTI)

    Turinsky, Paul

    2015-02-09

    This project investigated the development and utilization of Adaptive Model Refinement (AMoR) for nuclear systems simulation applications. AMoR refers to utilization of several models of physical phenomena which differ in prediction fidelity. If the highest fidelity model is judged to always provide or exceeded the desired fidelity, than if one can determine the difference in a Quantity of Interest (QoI) between the highest fidelity model and lower fidelity models, one could utilize the fidelity model that would just provide the magnitude of the QoI desired. Assuming lower fidelity models require less computational resources, in this manner computational efficiency can be realized provided the QoI value can be accurately and efficiently evaluated. This work utilized Generalized Perturbation Theory (GPT) to evaluate the QoI, by convoluting the GPT solution with the residual of the highest fidelity model determined using the solution from lower fidelity models. Specifically, a reactor core neutronics problem and thermal-hydraulics problem were studied to develop and utilize AMoR. The highest fidelity neutronics model was based upon the 3D space-time, two-group, nodal diffusion equations as solved in the NESTLE computer code. Added to the NESTLE code was the ability to determine the time-dependent GPT neutron flux. The lower fidelity neutronics model was based upon the point kinetics equations along with utilization of a prolongation operator to determine the 3D space-time, two-group flux. The highest fidelity thermal-hydraulics model was based upon the space-time equations governing fluid flow in a closed channel around a heat generating fuel rod. The Homogenous Equilibrium Mixture (HEM) model was used for the fluid and Finite Difference Method was applied to both the coolant and fuel pin energy conservation equations. The lower fidelity thermal-hydraulic model was based upon the same equations as used for the highest fidelity model but now with coarse spatial

  14. A Freestream-Preserving High-Order Finite-Volume Method for Mapped Grids with Adaptive-Mesh Refinement

    SciTech Connect (OSTI)

    Guzik, S; McCorquodale, P; Colella, P

    2011-12-16

    A fourth-order accurate finite-volume method is presented for solving time-dependent hyperbolic systems of conservation laws on mapped grids that are adaptively refined in space and time. Novel considerations for formulating the semi-discrete system of equations in computational space combined with detailed mechanisms for accommodating the adapting grids ensure that conservation is maintained and that the divergence of a constant vector field is always zero (freestream-preservation property). Advancement in time is achieved with a fourth-order Runge-Kutta method.

  15. ,"U.S. Sales to End Users Refiner Residual Fuel Oil and No. 4 Fuel Sales Volumes"

    U.S. Energy Information Administration (EIA) (indexed site)

    Residual Fuel Oil and No. 4 Fuel Sales Volumes" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Sales to End Users Refiner Residual Fuel Oil and No. 4 Fuel Sales Volumes",4,"Monthly","8/2016","1/15/1983" ,"Release Date:","11/1/2016" ,"Next Release

  16. Impact of High Solar Penetration in the Western Interconnection

    SciTech Connect (OSTI)

    Lew, D.; Miller, N.; Clark, K.; Jordan, G.; Gao, Z.

    2010-12-01

    This paper presents an overview of the variable characteristics of solar power, as well as the accompanying grid dynamic performance and operational economics for a system with significant solar generation. The paper will show results of economic operational simulations of a very high solar generation future for the western half of the United States.

  17. Maquoketa paleotopography key to reservoirs in western Illinois

    SciTech Connect (OSTI)

    Whitaker, S.T.; Ledbetter, J.C.

    1996-08-12

    Shallow Silurian reservoirs in western Illinois have been a primary target for exploration since the late 1950s. It was not until the discovery and development of Buckhorn Consolidated field in the early 1980s, however, that significant drilling efforts for Silurian reservoirs were focused on western Illinois. At Buckhorn, 1.7 million bbl of oil have been produced from a basal Silurian dolomite at about 650 ft. Drawn by inexpensive drilling and available acreage, hundreds of operators flocked to western Illinois to try their luck. By the late 1980s, however, exploration efforts in western Illinois were curtailed due to the failure to locate additional significant reservoirs. Much of this failure was due to the lack of a suitable geologic model that could be used to explain the reason for reservoir development and thereby guide exploration efforts. An article by Whitaker and Howard in 1995 presented a geologic model explaining Silurian reservoir development and stratigraphic entrapment of oil at Buckhorn Consolidated field were formed as Silurian dolomite in-filled a shallow paleovalley cut into the underlying Ordovician Maquoketa shale. Some companies have recently initiated new exploration efforts in the area using this model. This paper discusses the efforts and results of several of these new areas.

  18. Western Canadian coking coals -- Thermal rheology and coking quality

    SciTech Connect (OSTI)

    Leeder, W.R.; Price, J.T.; Gransden, J.F.

    1997-12-31

    Methods of predicting coke strength developed from the thermal rheological properties of Carboniferous coals frequently indicate that Cretaceous coals would not make high quality coke -- yet both types of coals produce coke suitable for the iron blast furnace. This paper will discuss the reasons why Western Canadian coals exhibit lower rheological values and how to predict the strength of coke produced from them.

  19. Western Wind and Solar Integration Study: Hydropower Analysis

    SciTech Connect (OSTI)

    Acker, T.; Pete, C.

    2012-03-01

    The U.S. Department of Energy's (DOE) study of 20% Wind Energy by 2030 was conducted to consider the benefits, challenges, and costs associated with sourcing 20% of U.S. energy consumption from wind power by 2030. This study found that with proactive measures, no insurmountable barriers were identified to meet the 20% goal. Following this study, DOE and the National Renewable Energy Laboratory (NREL) conducted two more studies: the Eastern Wind Integration and Transmission Study (EWITS) covering the eastern portion of the U.S., and the Western Wind and Solar Integration Study (WWSIS) covering the western portion of the United States. The WWSIS was conducted by NREL and research partner General Electric (GE) in order to provide insight into the costs, technical or physical barriers, and operational impacts caused by the variability and uncertainty of wind, photovoltaic, and concentrated solar power when employed to serve up to 35% of the load energy in the WestConnect region (Arizona, Colorado, Nevada, New Mexico, and Wyoming). WestConnect is composed of several utility companies working collaboratively to assess stakeholder and market needs to and develop cost-effective improvements to the western wholesale electricity market. Participants include the Arizona Public Service, El Paso Electric Company, NV Energy, Public Service of New Mexico, Salt River Project, Tri-State Generation and Transmission Cooperative, Tucson Electric Power, Xcel Energy and the Western Area Power Administration.

  20. AGA Western Consuming Region Natural Gas in Underground Storage...

    U.S. Energy Information Administration (EIA) (indexed site)

    Percent) AGA Western Consuming Region Natural Gas in Underground Storage - Change in ... Dec 1996 -2.90 -12.60 -11.90 -5.90 -5.40 -8.80 -13.60 -15.80 -17.10 -20.40 -23.20 -23.00 ...