National Library of Energy BETA

Sample records for vacant square footage

  1. ,"Housing Units1","Average Square Footage Per Housing Unit",...

    Energy Information Administration (EIA) (indexed site)

    ... Vacant housing units, seasonal units, second homes, military housing, and group quarters are excluded. 2Total square footage includes all basements, finished or conditioned (heated ...

  2. Table 1a. Effective, Occupied, and Vacant Square Footage, 1992

    Energy Information Administration (EIA) (indexed site)

    12,100 944 92 Midwest 1,196 17,117 15,691 1,425 91 South 1,953 24,401 22,300 2,101 91 West 866 12,508 11,233 1,274 89 Energy Sources (more than one may apply) Electricity 4,590...

  3. Effective Occupied and Vacant Square Footage in Commercial Buildigs...

    Energy Information Administration (EIA) (indexed site)

    Btu in all commercial buildings using natural gas(Table 3a). The most natural gas intensive buildings were buildings where the primary activity was health care with 133...

  4. ,"Housing Units1","Average Square Footage Per Housing Unit",,,"Average Square Footage Per Household Member"

    Energy Information Administration (EIA) (indexed site)

    4 Average Square Footage of Single-Family Homes, by Housing Characteristics, 2009" " Final" ,"Housing Units1","Average Square Footage Per Housing Unit",,,"Average Square Footage Per Household Member" "Housing Characteristics","Millions","Total2","Heated","Cooled","Total2","Heated","Cooled" "Total Single-Family",78.6,2422,2002,1522,880,727,553 "Census

  5. ,"Housing Units1","Average Square Footage Per Housing Unit",,,"Average Square Footage Per Household Member"

    Energy Information Administration (EIA) (indexed site)

    5 Average Square Footage of Multi-Family Homes, by Housing Characteristics, 2009" " Final" ,"Housing Units1","Average Square Footage Per Housing Unit",,,"Average Square Footage Per Household Member" "Housing Characteristics","Millions","Total2","Heated","Cooled","Total2","Heated","Cooled" "Total Multi-Family",28.1,930,807,535,453,393,261 "Census Region"

  6. ,"Housing Units1","Average Square Footage Per Housing Unit",,,"Average Square Footage Per Household Member"

    Energy Information Administration (EIA) (indexed site)

    6 Average Square Footage of Mobile Homes, by Housing Characteristics, 2009" " Final" ,"Housing Units1","Average Square Footage Per Housing Unit",,,"Average Square Footage Per Household Member" "Housing Characteristics","Millions","Total2","Heated","Cooled","Total2","Heated","Cooled" "Total Mobile Homes",6.9,1087,985,746,413,375,283 "Census Region"

  7. ,"Housing Units1","Average Square Footage Per Housing Unit",,,"Average Square Footage Per Household Member"

    Energy Information Administration (EIA) (indexed site)

    9 Average Square Footage of U.S. Homes, by Housing Characteristics, 2009" " Final" ,"Housing Units1","Average Square Footage Per Housing Unit",,,"Average Square Footage Per Household Member" "Housing Characteristics","Millions","Total2","Heated","Cooled","Total2","Heated","Cooled" "Total",113.6,1971,1644,1230,766,639,478 "Census Region"

  8. Vacant Buildings

    Energy Information Administration (EIA) (indexed site)

    Vacant Characteristics by Activity... Vacant Vacant buildings are those in which more floorspace was vacant than was used for any single commercial activity at the time of the...

  9. Vacant | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vacant About Us Vacant - Deputy General Counsel for Litigation, Regulation and Enforcement

  10. Vacant | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Vacant Jump to: navigation, search Building Type Vacant Definition Buildings in which more floorspace was vacant than was used for any single commercial activity at the time of...

  11. ,"Housing Units1","Average Square Footage Per Housing Unit",...

    Energy Information Administration (EIA) (indexed site)

    ...llinois",4.8,2186,1911,1451,860,752,571 "Michigan",3.8,1954,1559,962,729,582,359 ...Kerosene",0.4,2093,1774,1155,682,578,376 "Solar",0.2,2313,1861,1337,1145,921,662 "Main ...

  12. ,"Housing Units1","Average Square Footage Per Housing Unit",...

    Energy Information Administration (EIA) (indexed site)

    ... U.S. Department of Energy's Office of Energy and Efficiency and Renewable Energy (EERE). 5Rented includes households that occupy their primary housing unit without payment of rent. ...

  13. ,"Housing Units1","Average Square Footage Per Housing Unit",...

    Energy Information Administration (EIA) (indexed site)

    ...,0.5,1030,968,711,524,492,362 "Year of Construction" "Before 1940",5.6,1991,1428,573,826,5... "Major Outside Wall Construction" "Siding (Aluminum, Vinyl, ...

  14. EERE B-Roll footage | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    News » EERE B-Roll footage EERE B-Roll footage The Office of Energy Efficiency and Renewable Energy (EERE) provides the following B-roll footage for use by producers. All of EERE's B-roll is free to use and copyright-free. B-roll is available on the following topics: Advanced Manufacturing advanced_manufacturing.jpg Geothermal Energy geothermal.jpg Hydrogen and Fuel Cells hydrogen.jpg Solar Decathlon solar_d.jpg WATER POWER water_power.jpg You can also view all EERE B-roll. Bioenergy

  15. Table 1b. Relative Standard Errors for Effective, Occupied, and...

    Energy Information Administration (EIA) (indexed site)

    b.Relative Standard Errors Table 1b. Relative Standard Errors for Effective Occupied, and Vacant Square Footage, 1992 Building Characteristics All Buildings (thousand) Total...

  16. Hanford F Reactor Inspection B-roll footage | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hanford F Reactor Inspection B-roll footage Hanford F Reactor Inspection B-roll footage Addthis Description A look at the inside of Hanford's F Reactor during a scheduled inspection October 2014

  17. Backstage Footage from the ARPA-E Summit | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Backstage Footage from the ARPA-E Summit Backstage Footage from the ARPA-E Summit March 2, 2011 - 6:00am Addthis John Schueler John Schueler Former New Media Specialist, Office of Public Affairs Yesterday morning, Secretary Chu and Governor Arnold Schwarzenegger decided to drop in on a gathering of graduate students at the ARPA-E Energy Innovation Summit. Hailing from 30 different campuses, these students have been strong advocates for the sciences at their respective schools and represent the

  18. U.S. Footage Drilled for Crude Oil Exploratory and Developmental Wells

    Gasoline and Diesel Fuel Update

    (Thousand Feet) and Developmental Wells (Thousand Feet) U.S. Footage Drilled for Crude Oil Exploratory and Developmental Wells (Thousand Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's 79,428 1950's 92,695 95,106 98,148 102,136 113,362 121,148 120,352 110,043 93,105 94,611 1960's 86,568 85,626 88,431 81,809 80,463 73,322 67,340 58,634 59,517 61,582 1970's 56,859 49,109 49,269 44,416 52,025 66,819 68,892 75,451 77,041 82,688 1980's 125,262 172,167

  19. U.S. Footage Drilled for Crude Oil, Natural Gas, and Dry Developmental

    Gasoline and Diesel Fuel Update

    Wells (Thousand Feet) Developmental Wells (Thousand Feet) U.S. Footage Drilled for Crude Oil, Natural Gas, and Dry Developmental Wells (Thousand Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's 100,821 1950's 117,183 122,802 128,518 133,581 148,408 156,976 158,943 147,864 131,820 137,441 1960's 136,345 135,191 141,018 129,164 131,923 125,678 107,215 93,518 94,012 99,642 1970's 95,026 85,358 92,875 92,605 102,059 125,817 133,365 157,917 173,472 181,702

  20. U.S. Footage Drilled for Crude Oil, Natural Gas, and Dry Exploratory Wells

    Gasoline and Diesel Fuel Update

    (Thousand Feet) Wells (Thousand Feet) U.S. Footage Drilled for Crude Oil, Natural Gas, and Dry Exploratory Wells (Thousand Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's 34,798 1950's 40,175 49,344 55,615 60,664 59,601 69,206 74,337 69,181 61,484 63,253 1960's 55,831 54,442 53,616 53,485 55,497 49,204 55,709 47,839 50,958 57,466 1970's 43,530 41,895 44,956 45,618 51,315 54,677 53,617 57,949 65,197 63,096 1980's 74,288 101,808 88,856 69,690 80,853

  1. U.S. Footage Drilled for Crude Oil, Natural Gas, and Dry Exploratory and

    Gasoline and Diesel Fuel Update

    Developmental Wells (Thousand Feet) and Developmental Wells (Thousand Feet) U.S. Footage Drilled for Crude Oil, Natural Gas, and Dry Exploratory and Developmental Wells (Thousand Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's 135,619 1950's 157,358 172,146 184,133 194,245 208,009 226,182 233,280 217,045 193,304 200,694 1960's 192,176 189,633 194,634 182,649 187,420 174,882 162,924 141,357 144,970 157,108 1970's 138,556 127,253 137,831 138,223

  2. U.S. Footage Drilled for Dry Exploratory and Developmental Wells (Thousand

    Gasoline and Diesel Fuel Update

    Feet) and Developmental Wells (Thousand Feet) U.S. Footage Drilled for Dry Exploratory and Developmental Wells (Thousand Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's 43,754 1950's 50,977 63,093 70,730 73,862 75,790 85,103 90,190 83,167 74,643 79,476 1960's 77,361 74,716 77,253 76,307 81,360 76,629 69,636 61,142 64,737 71,364 1970's 58,074 54,685 58,556 55,761 62,899 69,220 68,977 76,728 85,788 81,642 1980's 99,575 134,934 123,746 105,222 119,860

  3. U.S. Footage Drilled for Natural Gas Exploratory and Developmental Wells

    Gasoline and Diesel Fuel Update

    (Thousand Feet) and Developmental Wells (Thousand Feet) U.S. Footage Drilled for Natural Gas Exploratory and Developmental Wells (Thousand Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's 12,437 1950's 13,685 13,947 15,257 18,248 18,857 19,930 22,738 23,836 25,555 26,606 1960's 28,246 29,292 28,949 24,533 25,598 24,931 25,948 21,581 20,716 24,162 1970's 23,623 23,460 30,006 38,045 38,449 44,454 49,113 63,686 75,841 80,468 1980's 92,106 108,353 107,149

  4. U.S. Footage Drilled for Crude Oil Exploratory Wells (Thousand Feet)

    Gasoline and Diesel Fuel Update

    Wells (Thousand Feet) U.S. Footage Drilled for Crude Oil Exploratory Wells (Thousand Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's 5,950 1950's 6,862 8,125 8,491 9,432 9,409 10,774 11,111 9,794 8,712 8,545 1960's 6,829 5,900 6,205 6,409 6,715 5,366 6,817 5,678 5,642 6,563 1970's 4,729 3,786 4,028 4,008 5,029 5,806 6,527 6,870 7,105 7,941 1980's 10,177 15,515 13,413 10,437 12,294 9,854 6,579 5,652 5,286 3,659 1990's 5,320 4,469 3,957 3,572 3,970 3,934

  5. U.S. Footage Drilled for Dry Developmental Wells (Thousand Feet)

    Gasoline and Diesel Fuel Update

    Developmental Wells (Thousand Feet) U.S. Footage Drilled for Dry Developmental Wells (Thousand Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's 17,315 1950's 20,020 24,370 26,999 26,582 29,998 31,883 32,143 29,747 27,343 30,800 1960's 33,826 31,423 35,030 33,460 36,782 36,548 26,552 22,960 23,162 25,446 1970's 22,951 20,186 22,475 21,190 24,296 28,772 31,008 35,905 39,493 39,130 1980's 49,326 65,720 63,066 56,233 61,236 52,784 30,636 26,842 25,438 20,152

  6. U.S. Footage Drilled for Dry Exploratory Wells (Thousand Feet)

    Gasoline and Diesel Fuel Update

    Wells (Thousand Feet) U.S. Footage Drilled for Dry Exploratory Wells (Thousand Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's 26,439 1950's 30,957 38,723 43,731 47,280 45,792 53,220 58,047 53,420 47,300 48,676 1960's 43,535 43,293 42,223 42,847 44,578 40,081 43,084 38,182 41,575 45,918 1970's 35,123 34,499 36,081 34,571 38,603 40,448 37,969 40,823 46,295 42,512 1980's 50,249 69,214 60,680 48,989 58,624 47,604 30,325 26,746 27,079 21,947 1990's 20,752

  7. U.S. Footage Drilled for Natural Gas Developmental Wells (Thousand Feet)

    Gasoline and Diesel Fuel Update

    Developmental Wells (Thousand Feet) U.S. Footage Drilled for Natural Gas Developmental Wells (Thousand Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's 10,028 1950's 11,329 11,451 11,863 14,296 14,458 14,718 17,559 17,869 20,083 20,575 1960's 22,780 24,042 23,762 20,303 21,394 21,174 20,140 17,602 16,975 19,177 1970's 19,945 19,850 25,159 31,007 30,766 36,032 39,992 53,431 64,043 67,825 1980's 78,244 91,274 92,386 67,844 81,545 68,149 39,638 37,520 40,371

  8. U.S. Footage Drilled for Natural Gas Exploratory Wells (Thousand Feet)

    Gasoline and Diesel Fuel Update

    Wells (Thousand Feet) U.S. Footage Drilled for Natural Gas Exploratory Wells (Thousand Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1940's 2,409 1950's 2,356 2,496 3,394 3,952 4,399 5,212 5,179 5,967 5,472 6,031 1960's 5,466 5,250 5,187 4,230 4,204 3,757 5,808 3,979 3,741 4,985 1970's 3,678 3,610 4,847 7,038 7,683 8,422 9,121 10,255 11,798 12,643 1980's 13,862 17,079 14,763 10,264 9,935 8,144 5,401 5,064 4,992 4,664 1990's 5,765 4,615 3,543 3,947 5,120

  9. Jackson Square | Y-12 National Security Complex

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Jackson Square Jackson Square Construction of Jackson Square Shopping Center.

  10. Do it yourself lighting power survey: lighting power audit for use with the Massachusetts type watts per square foot method of calculating a building's lighting power budget

    SciTech Connect

    Not Available

    1980-06-01

    Advantages of the self-audit approach to energy conservation are presented. These are that it is cheaper to do it yourself; the employees become part of the corporate conservation effect; and no one knows the building and its needs better than the occupant. Steps described in the lighting survey procedure are: (1) divide the building into categories; (2) determine the total square footage for each category; (3) assign a power allowance for each category; (4) multiply the total square footage for each category by the respective power allowances; (5) add the budget sub-totals for each category to determine total building budget; and (6) walk through the building room-by-room and calculate the connected lighting load fixture-by-fixture. Some worksheets are provided. (MCW)

  11. SQUARE WAVE AMPLIFIER

    DOEpatents

    Leavitt, M.A.; Lutz, I.C.

    1958-08-01

    An amplifier circuit is described for amplifying sigmals having an alternating current component superimposed upon a direct current component, without loss of any segnnent of the alternating current component. The general circuit arrangement includes a vibrator, two square wave amplifiers, and recombination means. The amplifier input is connected to the vibrating element of the vibrator and is thereby alternately applied to the input of each square wave amplifier. The detailed circuitry of the recombination means constitutes the novelty of the annplifier and consists of a separate, dual triode amplifier coupled to the output of each square wave amplifier with a recombination connection from the plate of one amplifier section to a grid of one section of the other amplifier. The recombination circuit has provisions for correcting distortion caused by overlapping of the two square wave voltages from the square wave amplifiers.

  12. Electron diffraction study of 1M illites with interstratified trans- and cis-vacant 2 : 1 layers

    SciTech Connect

    Zhukhlistov, A. P. Vikent'ev, I. V.; Rusinova, O. V.

    2012-03-15

    Illites from the volcanogenic Zn-Au-Ag sulfide deposit Galkinskoe (Northern Urals) have been investigated using oblique-texture electron diffraction patterns in combination with the simulation of diffraction effects. Along with single-phase tv/cv1M illites, the structures of which are formed by statistically interstratified dioctahedral 2: 1 layers with vacant trans- or cis-octahedra, illites in the form of a mixture of two interstratified tv/cv1M phases, with the dominance of tv- or cv layers, are identified. It is shown that in the latter case the diffraction pattern can also be interpreted within the single-phase tv/cv model, provided that the tv- and cv layers are distributed with some tendency to segregate. The structural features indicating the preference of the two-phase model are analyzed.

  13. Vacant | Department of Energy

    Energy Saver

    Transactions, Technology, & Contractor Human Resources

  14. Generalized conjugate gradient squared

    SciTech Connect

    Fokkema, D.R.; Sleijpen, G.L.G.

    1994-12-31

    In order to solve non-symmetric linear systems of equations, the Conjugate Gradient Squared (CGS) is a well-known and widely used iterative method. In practice the method converges fast, often twice as fast as the Bi-Conjugate Gradient method. This is what you may expect, since CGS uses the square of the BiCG polynomial. However, CGS may suffer from its erratic convergence behavior. The method may diverge or the approximate solution may be inaccurate. BiCGSTAB uses the BiCG polynomial and a product of linear factors in an attempt to smoothen the convergence. In many cases, this has proven to be very effective. Unfortunately, the convergence of BiCGSTAB may stall when a linear factor (nearly) degenerates. BiCGstab({ell}) is designed to overcome this degeneration of linear factors. It generalizes BiCGSTAB and uses both the BiCG polynomial and a product of higher order factors. Still, CGS may converge faster than BiCGSTAB or BiCGstab({ell}). So instead of using a product of linear or higher order factors, it may be worthwhile to look for other polynomials. Since the BiCG polynomial is based on a three term recursion, a natural choice would be a polynomial based on another three term recursion. Possibly, a suitable choice of recursion coefficients would result in method that converges faster or as fast as CGS, but less erratic. It turns out that an algorithm for such a method can easily be formulated. One particular choice for the recursion coefficients leads to CGS. Therefore one could call this algorithm generalized CGS. Another choice for the recursion coefficients leads to BiCGSTAB. It is therefore possible to mix linear factors and some polynomial based on a three term recursion. This way one may get the best of both worlds. The authors will report on their findings.

  15. Solar Energy Squared, LLC | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Squared, LLC Jump to: navigation, search Logo: Solar Energy Squared, LLC Name: Solar Energy Squared, LLC Address: 116 Ottenheimer Plaza, President Clinton Avenue Place: Little...

  16. Deming's General Least Square Fitting

    Energy Science and Technology Software Center

    1992-02-18

    DEM4-26 is a generalized least square fitting program based on Deming''s method. Functions built into the program for fitting include linear, quadratic, cubic, power, Howard''s, exponential, and Gaussian; others can easily be added. The program has the following capabilities: (1) entry, editing, and saving of data; (2) fitting of any of the built-in functions or of a user-supplied function; (3) plotting the data and fitted function on the display screen, with error limits if requested,more » and with the option of copying the plot to the printer; (4) interpolation of x or y values from the fitted curve with error estimates based on error limits selected by the user; and (5) plotting the residuals between the y data values and the fitted curve, with the option of copying the plot to the printer. If the plot is to be copied to a printer, GRAPHICS should be called from the operating system disk before the BASIC interpreter is loaded.« less

  17. Blue Square Energy BSE | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Energy BSE Jump to: navigation, search Name: Blue Square Energy (BSE) Place: Maryland Zip: 21901 Product: US manufacturer of low-purity crystalline silicon cells and modules...

  18. Elmo bumpy square plasma confinement device

    DOEpatents

    Owen, L.W.

    1985-01-01

    The invention is an Elmo bumpy type plasma confinement device having a polygonal configuration of closed magnet field lines for improved plasma confinement. In the preferred embodiment, the device is of a square configuration which is referred to as an Elmo bumpy square (EBS). The EBS is formed by four linear magnetic mirror sections each comprising a plurality of axisymmetric assemblies connected in series and linked by 90/sup 0/ sections of a high magnetic field toroidal solenoid type field generating coils. These coils provide corner confinement with a minimum of radial dispersion of the confined plasma to minimize the detrimental effects of the toroidal curvature of the magnetic field. Each corner is formed by a plurality of circular or elliptical coils aligned about the corner radius to provide maximum continuity in the closing of the magnetic field lines about the square configuration confining the plasma within a vacuum vessel located within the various coils forming the square configuration confinement geometry.

  19. A spectral mimetic least-squares method

    DOE PAGES [OSTI]

    Bochev, Pavel; Gerritsma, Marc

    2014-09-01

    We present a spectral mimetic least-squares method for a model diffusion–reaction problem, which preserves key conservation properties of the continuum problem. Casting the model problem into a first-order system for two scalar and two vector variables shifts material properties from the differential equations to a pair of constitutive relations. We also use this system to motivate a new least-squares functional involving all four fields and show that its minimizer satisfies the differential equations exactly. Discretization of the four-field least-squares functional by spectral spaces compatible with the differential operators leads to a least-squares method in which the differential equations are alsomore » satisfied exactly. Additionally, the latter are reduced to purely topological relationships for the degrees of freedom that can be satisfied without reference to basis functions. Furthermore, numerical experiments confirm the spectral accuracy of the method and its local conservation.« less

  20. A spectral mimetic least-squares method

    SciTech Connect

    Bochev, Pavel; Gerritsma, Marc

    2014-09-01

    We present a spectral mimetic least-squares method for a model diffusionreaction problem, which preserves key conservation properties of the continuum problem. Casting the model problem into a first-order system for two scalar and two vector variables shifts material properties from the differential equations to a pair of constitutive relations. We also use this system to motivate a new least-squares functional involving all four fields and show that its minimizer satisfies the differential equations exactly. Discretization of the four-field least-squares functional by spectral spaces compatible with the differential operators leads to a least-squares method in which the differential equations are also satisfied exactly. Additionally, the latter are reduced to purely topological relationships for the degrees of freedom that can be satisfied without reference to basis functions. Furthermore, numerical experiments confirm the spectral accuracy of the method and its local conservation.

  1. Latin square three dimensional gage master

    DOEpatents

    Jones, Lynn L.

    1982-01-01

    A gage master for coordinate measuring machines has an nxn array of objects distributed in the Z coordinate utilizing the concept of a Latin square experimental design. Using analysis of variance techniques, the invention may be used to identify sources of error in machine geometry and quantify machine accuracy.

  2. Pioneer Valley Photovoltaics Cooperative aka PV Squared | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Photovoltaics Cooperative aka PV Squared Jump to: navigation, search Name: Pioneer Valley Photovoltaics Cooperative (aka PV Squared) Place: New Britain, Connecticut Zip: 6051...

  3. Hybrid least squares multivariate spectral analysis methods

    DOEpatents

    Haaland, David M.

    2002-01-01

    A set of hybrid least squares multivariate spectral analysis methods in which spectral shapes of components or effects not present in the original calibration step are added in a following estimation or calibration step to improve the accuracy of the estimation of the amount of the original components in the sampled mixture. The "hybrid" method herein means a combination of an initial classical least squares analysis calibration step with subsequent analysis by an inverse multivariate analysis method. A "spectral shape" herein means normally the spectral shape of a non-calibrated chemical component in the sample mixture but can also mean the spectral shapes of other sources of spectral variation, including temperature drift, shifts between spectrometers, spectrometer drift, etc. The "shape" can be continuous, discontinuous, or even discrete points illustrative of the particular effect.

  4. Optical inverse-square displacement sensor

    DOEpatents

    Howe, Robert D.; Kychakoff, George

    1989-01-01

    This invention comprises an optical displacement sensor that uses the inverse-square attenuation of light reflected from a diffused surface to calculate the distance from the sensor to the reflecting surface. Light emerging from an optical fiber or the like is directed onto the surface whose distance is to be measured. The intensity I of reflected light is angle dependent, but within a sufficiently small solid angle it falls off as the inverse square of the distance from the surface. At least a pair of optical detectors are mounted to detect the reflected light within the small solid angle, their ends being at different distances R and R+.DELTA.R from the surface. The distance R can then be found in terms of the ratio of the intensity measurements and the separation length as ##EQU1##

  5. Optical inverse-square displacement sensor

    DOEpatents

    Howe, R.D.; Kychakoff, G.

    1989-09-12

    This invention comprises an optical displacement sensor that uses the inverse-square attenuation of light reflected from a diffused surface to calculate the distance from the sensor to the reflecting surface. Light emerging from an optical fiber or the like is directed onto the surface whose distance is to be measured. The intensity I of reflected light is angle dependent, but within a sufficiently small solid angle it falls off as the inverse square of the distance from the surface. At least a pair of optical detectors are mounted to detect the reflected light within the small solid angle, their ends being at different distances R and R + [Delta]R from the surface. The distance R can then be found in terms of the ratio of the intensity measurements and the separation length as given in an equation. 10 figs.

  6. B-Roll Footage | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Solar Energy solarenergy.jpg Energy-Efficient Vehicles eev.jpg Wind Energy windenergy.jpg News & Blog News Blog B-Roll Photographs Social Media Subscribe RSS Feeds Mission ...

  7. Total least squares for anomalous change detection

    SciTech Connect

    Theiler, James P; Matsekh, Anna M

    2010-01-01

    A family of difference-based anomalous change detection algorithms is derived from a total least squares (TLSQ) framework. This provides an alternative to the well-known chronochrome algorithm, which is derived from ordinary least squares. In both cases, the most anomalous changes are identified with the pixels that exhibit the largest residuals with respect to the regression of the two images against each other. The family of TLSQ-based anomalous change detectors is shown to be equivalent to the subspace RX formulation for straight anomaly detection, but applied to the stacked space. However, this family is not invariant to linear coordinate transforms. On the other hand, whitened TLSQ is coordinate invariant, and furthermore it is shown to be equivalent to the optimized covariance equalization algorithm. What whitened TLSQ offers, in addition to connecting with a common language the derivations of two of the most popular anomalous change detection algorithms - chronochrome and covariance equalization - is a generalization of these algorithms with the potential for better performance.

  8. Augmented classical least squares multivariate spectral analysis

    DOEpatents

    Haaland, David M.; Melgaard, David K.

    2004-02-03

    A method of multivariate spectral analysis, termed augmented classical least squares (ACLS), provides an improved CLS calibration model when unmodeled sources of spectral variation are contained in a calibration sample set. The ACLS methods use information derived from component or spectral residuals during the CLS calibration to provide an improved calibration-augmented CLS model. The ACLS methods are based on CLS so that they retain the qualitative benefits of CLS, yet they have the flexibility of PLS and other hybrid techniques in that they can define a prediction model even with unmodeled sources of spectral variation that are not explicitly included in the calibration model. The unmodeled sources of spectral variation may be unknown constituents, constituents with unknown concentrations, nonlinear responses, non-uniform and correlated errors, or other sources of spectral variation that are present in the calibration sample spectra. Also, since the various ACLS methods are based on CLS, they can incorporate the new prediction-augmented CLS (PACLS) method of updating the prediction model for new sources of spectral variation contained in the prediction sample set without having to return to the calibration process. The ACLS methods can also be applied to alternating least squares models. The ACLS methods can be applied to all types of multivariate data.

  9. Augmented Classical Least Squares Multivariate Spectral Analysis

    DOEpatents

    Haaland, David M.; Melgaard, David K.

    2005-07-26

    A method of multivariate spectral analysis, termed augmented classical least squares (ACLS), provides an improved CLS calibration model when unmodeled sources of spectral variation are contained in a calibration sample set. The ACLS methods use information derived from component or spectral residuals during the CLS calibration to provide an improved calibration-augmented CLS model. The ACLS methods are based on CLS so that they retain the qualitative benefits of CLS, yet they have the flexibility of PLS and other hybrid techniques in that they can define a prediction model even with unmodeled sources of spectral variation that are not explicitly included in the calibration model. The unmodeled sources of spectral variation may be unknown constituents, constituents with unknown concentrations, nonlinear responses, non-uniform and correlated errors, or other sources of spectral variation that are present in the calibration sample spectra. Also, since the various ACLS methods are based on CLS, they can incorporate the new prediction-augmented CLS (PACLS) method of updating the prediction model for new sources of spectral variation contained in the prediction sample set without having to return to the calibration process. The ACLS methods can also be applied to alternating least squares models. The ACLS methods can be applied to all types of multivariate data.

  10. Augmented Classical Least Squares Multivariate Spectral Analysis

    DOEpatents

    Haaland, David M.; Melgaard, David K.

    2005-01-11

    A method of multivariate spectral analysis, termed augmented classical least squares (ACLS), provides an improved CLS calibration model when unmodeled sources of spectral variation are contained in a calibration sample set. The ACLS methods use information derived from component or spectral residuals during the CLS calibration to provide an improved calibration-augmented CLS model. The ACLS methods are based on CLS so that they retain the qualitative benefits of CLS, yet they have the flexibility of PLS and other hybrid techniques in that they can define a prediction model even with unmodeled sources of spectral variation that are not explicitly included in the calibration model. The unmodeled sources of spectral variation may be unknown constituents, constituents with unknown concentrations, nonlinear responses, non-uniform and correlated errors, or other sources of spectral variation that are present in the calibration sample spectra. Also, since the various ACLS methods are based on CLS, they can incorporate the new prediction-augmented CLS (PACLS) method of updating the prediction model for new sources of spectral variation contained in the prediction sample set without having to return to the calibration process. The ACLS methods can also be applied to alternating least squares models. The ACLS methods can be applied to all types of multivariate data.

  11. Classical least squares multivariate spectral analysis

    DOEpatents

    Haaland, David M.

    2002-01-01

    An improved classical least squares multivariate spectral analysis method that adds spectral shapes describing non-calibrated components and system effects (other than baseline corrections) present in the analyzed mixture to the prediction phase of the method. These improvements decrease or eliminate many of the restrictions to the CLS-type methods and greatly extend their capabilities, accuracy, and precision. One new application of PACLS includes the ability to accurately predict unknown sample concentrations when new unmodeled spectral components are present in the unknown samples. Other applications of PACLS include the incorporation of spectrometer drift into the quantitative multivariate model and the maintenance of a calibration on a drifting spectrometer. Finally, the ability of PACLS to transfer a multivariate model between spectrometers is demonstrated.

  12. Hybrid least squares multivariate spectral analysis methods

    DOEpatents

    Haaland, David M.

    2004-03-23

    A set of hybrid least squares multivariate spectral analysis methods in which spectral shapes of components or effects not present in the original calibration step are added in a following prediction or calibration step to improve the accuracy of the estimation of the amount of the original components in the sampled mixture. The hybrid method herein means a combination of an initial calibration step with subsequent analysis by an inverse multivariate analysis method. A spectral shape herein means normally the spectral shape of a non-calibrated chemical component in the sample mixture but can also mean the spectral shapes of other sources of spectral variation, including temperature drift, shifts between spectrometers, spectrometer drift, etc. The shape can be continuous, discontinuous, or even discrete points illustrative of the particular effect.

  13. 2-D weighted least-squares phase unwrapping

    DOEpatents

    Ghiglia, Dennis C.; Romero, Louis A.

    1995-01-01

    Weighted values of interferometric signals are unwrapped by determining the least squares solution of phase unwrapping for unweighted values of the interferometric signals; and then determining the least squares solution of phase unwrapping for weighted values of the interferometric signals by preconditioned conjugate gradient methods using the unweighted solutions as preconditioning values. An output is provided that is representative of the least squares solution of phase unwrapping for weighted values of the interferometric signals.

  14. 2-D weighted least-squares phase unwrapping

    DOEpatents

    Ghiglia, D.C.; Romero, L.A.

    1995-06-13

    Weighted values of interferometric signals are unwrapped by determining the least squares solution of phase unwrapping for unweighted values of the interferometric signals; and then determining the least squares solution of phase unwrapping for weighted values of the interferometric signals by preconditioned conjugate gradient methods using the unweighted solutions as preconditioning values. An output is provided that is representative of the least squares solution of phase unwrapping for weighted values of the interferometric signals. 6 figs.

  15. Square grid state in dielectric barrier discharge system

    SciTech Connect

    Dong, L. F.; Li, S. F.; Fan, W. L.; Pan, Y. Y.

    2009-12-15

    A square grid state and a hexagonal grid state are observed in a dielectric barrier discharge system. They are selected by different resonance mechanisms, namely, a four-wave interaction for the square grid state and a three-wave interaction for the hexagonal grid state. The spatiotemporal dynamics of the square grid state is studied by an optical method. It is found that the square grid state is an interleaving of three different sublattices, which correspond to a harmonic mode and two subharmonic modes.

  16. --No Title--

    Energy Information Administration (EIA) (indexed site)

    CENDIV. Metropolitan statistical area MSA4 11- 11 MSA. Climate zone CLIMATE4 13- 13 CLIMAT. B1 Square footage SQFT4 15- 22 MISS8CH. B2 Square footage SQFTC4 24- 25 SQFTC. ...

  17. Square Grains in Asymmetric Rod-Coil Block Copolymers (Journal...

    Office of Scientific and Technical Information (OSTI)

    Unlike the rounded grains that are well known to form in most soft materials, square grains of microphase-separated lamellae are observed in thin films of a rod-coil block ...

  18. Word in the Square: Conversation Monitoring and Analysis Report

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Word in the Square Conversation Monitoring and Analysis Report Prepared for the Hydrogen Education Foundation December 10, 2007 Overview The Word in the Square Report summarizes online discussions about hydrogen within the context of alternative energy, environment, technology and sustainability. This report focuses on the online discussions for the month of November 2007. The report is divided into five categories: * Key Findings - provides key insight of the major topics of conversation *

  19. 2D barrier in a superconducting niobium square

    SciTech Connect

    Joya, Miryam R. Barba-ortega, J.; Sardella, Edson

    2014-11-05

    The presence of barriers changes the vortex structure in superconducting Nb square in presence of a uniform applied magnetic field. The Cooper pair configurations in a mesoscopics superconducting square of Nb with a barrier are calculated within the nonlinear Ginzburg Landau equations. We predict the nucleation of multi-vortex states into the sample and a soft entry of the magnetic field inside and around into the barrier. A novel and non-conventional vortex configurations occurs at determined magnetic field.

  20. A Least-Squares Transport Equation Compatible with Voids

    SciTech Connect

    Hansen, Jon; Peterson, Jacob; Morel, Jim; Ragusa, Jean; Wang, Yaqi

    2014-12-01

    Standard second-order self-adjoint forms of the transport equation, such as the even-parity, odd-parity, and self-adjoint angular flux equation, cannot be used in voids. Perhaps more important, they experience numerical convergence difficulties in near-voids. Here we present a new form of a second-order self-adjoint transport equation that has an advantage relative to standard forms in that it can be used in voids or near-voids. Our equation is closely related to the standard least-squares form of the transport equation with both equations being applicable in a void and having a nonconservative analytic form. However, unlike the standard least-squares form of the transport equation, our least-squares equation is compatible with source iteration. It has been found that the standard least-squares form of the transport equation with a linear-continuous finite-element spatial discretization has difficulty in the thick diffusion limit. Here we extensively test the 1D slab-geometry version of our scheme with respect to void solutions, spatial convergence rate, and the intermediate and thick diffusion limits. We also define an effective diffusion synthetic acceleration scheme for our discretization. Our conclusion is that our least-squares Sn formulation represents an excellent alternative to existing second-order Sn transport formulations

  1. High-frequency matrix converter with square wave input

    SciTech Connect

    Carr, Joseph Alexander; Balda, Juan Carlos

    2015-03-31

    A device for producing an alternating current output voltage from a high-frequency, square-wave input voltage comprising, high-frequency, square-wave input a matrix converter and a control system. The matrix converter comprises a plurality of electrical switches. The high-frequency input and the matrix converter are electrically connected to each other. The control system is connected to each switch of the matrix converter. The control system is electrically connected to the input of the matrix converter. The control system is configured to operate each electrical switch of the matrix converter converting a high-frequency, square-wave input voltage across the first input port of the matrix converter and the second input port of the matrix converter to an alternating current output voltage at the output of the matrix converter.

  2. Organic light-emitting diodes from homoleptic square planar complexes

    DOEpatents

    Omary, Mohammad A

    2013-11-12

    Homoleptic square planar complexes [M(N.LAMBDA.N).sub.2], wherein two identical N.LAMBDA.N bidentate anionic ligands are coordinated to the M(II) metal center, including bidentate square planar complexes of triazolates, possess optical and electrical properties that make them useful for a wide variety of optical and electrical devices and applications. In particular, the complexes are useful for obtaining white or monochromatic organic light-emitting diodes ("OLEDs"). Improved white organic light emitting diode ("WOLED") designs have improved efficacy and/or color stability at high brightness in single- or two-emitter white or monochrome OLEDs that utilize homoleptic square planar complexes, including bis[3,5-bis(2-pyridyl)-1,2,4-triazolato]platinum(II) ("Pt(ptp).sub.2").

  3. Latin-square three-dimensional gage master

    DOEpatents

    Jones, L.

    1981-05-12

    A gage master for coordinate measuring machines has an nxn array of objects distributed in the Z coordinate utilizing the concept of a Latin square experimental design. Using analysis of variance techniques, the invention may be used to identify sources of error in machine geometry and quantify machine accuracy.

  4. A new least-squares transport equation compatible with voids

    SciTech Connect

    Hansen, J. B.; Morel, J. E.

    2013-07-01

    We define a new least-squares transport equation that is applicable in voids, can be solved using source iteration with diffusion-synthetic acceleration, and requires only the solution of an independent set of second-order self-adjoint equations for each direction during each source iteration. We derive the equation, discretize it using the S{sub n} method in conjunction with a linear-continuous finite-element method in space, and computationally demonstrate various of its properties. (authors)

  5. Multilevel first-order system least squares for PDEs

    SciTech Connect

    McCormick, S.

    1994-12-31

    The purpose of this talk is to analyze the least-squares finite element method for second-order convection-diffusion equations written as a first-order system. In general, standard Galerkin finite element methods applied to non-self-adjoint elliptic equations with significant convection terms exhibit a variety of deficiencies, including oscillations or nonmonotonicity of the solution and poor approximation of its derivatives, A variety of stabilization techniques, such as up-winding, Petrov-Galerkin, and stream-line diffusion approximations, have been introduced to eliminate these and other drawbacks of standard Galerkin methods. Yet, although significant progress has been made, convection-diffusion problems remain among the more difficult problems to solve numerically. The first-order system least-squares approach promises to overcome these deficiencies. This talk develops ellipticity estimates and discretization error bounds for elliptic equations (with lower order terms) that are reformulated as a least-squares problem for an equivalent first-order system. The main results are the proofs of ellipticity and optimal convergence of multiplicative and additive solvers of the discrete systems.

  6. Solving linear inequalities in a least squares sense

    SciTech Connect

    Bramley, R.; Winnicka, B.

    1994-12-31

    Let A {element_of} {Re}{sup mxn} be an arbitrary real matrix, and let b {element_of} {Re}{sup m} a given vector. A familiar problem in computational linear algebra is to solve the system Ax = b in a least squares sense; that is, to find an x* minimizing {parallel}Ax {minus} b{parallel}, where {parallel} {center_dot} {parallel} refers to the vector two-norm. Such an x* solves the normal equations A{sup T}(Ax {minus} b) = 0, and the optimal residual r* = b {minus} Ax* is unique (although x* need not be). The least squares problem is usually interpreted as corresponding to multiple observations, represented by the rows of A and b, on a vector of data x. The observations may be inconsistent, and in this case a solution is sought that minimizes the norm of the residuals. A less familiar problem to numerical linear algebraists is the solution of systems of linear inequalities Ax {le} b in a least squares sense, but the motivation is similar: if a set of observations places upper or lower bounds on linear combinations of variables, the authors want to find x* minimizing {parallel} (Ax {minus} b){sub +} {parallel}, where the i{sup th} component of the vector v{sub +} is the maximum of zero and the i{sup th} component of v.

  7. DESIGN OF PHASE INDUCED AMPLITUDE APODIZATION CORONAGRAPHS OVER SQUARE APERTURES

    SciTech Connect

    Pueyo, Laurent; Jeremy Kasdin, N.; Carlotti, Alexis; Vanderbei, Robert

    2011-08-01

    The purpose of this paper is to present the results of a theoretical study pertaining to the feasibility of Phase Induced Amplitude Apodization (PIAA) units using deformable mirrors (DMs). We begin by reviewing the general derivation of the design equations driving PIAA. We then show how to solve these equations for square apertures and show the performance of pure PIAA systems in the ray optics regime. We tie these design equations into the study of edge diffraction effects and provide a general expression for the field after a full propagation through a PIAA coronagraph. Third, we illustrate how a combination of pre- and post-apodizers yields a contrast of 10{sup -10} even in the presence of diffractive effects, for configuration with neither wavefront errors or wavefront control. Finally, we present novel PIAA configurations over square apertures which circumvent the constraints on the manufacturing of PIAA optics by inducing the apodization with two square DMs. Such solutions rely on pupil size smaller than currently envisioned static PIAA solutions and thus require aggressive pre- and post-apodizing screens in order to mitigate for diffractive effect between the two mirrors. As a result they are associated with significant loss in performance, throughput in particular.

  8. Positive Scattering Cross Sections using Constrained Least Squares

    SciTech Connect

    Dahl, J.A.; Ganapol, B.D.; Morel, J.E.

    1999-09-27

    A method which creates a positive Legendre expansion from truncated Legendre cross section libraries is presented. The cross section moments of order two and greater are modified by a constrained least squares algorithm, subject to the constraints that the zeroth and first moments remain constant, and that the standard discrete ordinate scattering matrix is positive. A method using the maximum entropy representation of the cross section which reduces the error of these modified moments is also presented. These methods are implemented in PARTISN, and numerical results from a transport calculation using highly anisotropic scattering cross sections with the exponential discontinuous spatial scheme is presented.

  9. R-SQUARE IMPEDANCES OF ERL FERRITE HOM ABSORBER.

    SciTech Connect

    HAHN, H.; BURRILL, A.; CALAGA,R.; KAYRAN, D.; ZHAO, Y.

    2005-07-10

    An R&D facility for an Energy Recovery Linac (ERL) intended as part of an electron-cooling project for RHIC is, being constructed at this laboratory. The center piece of the facility is a 5-cell 703.75 MHz super-conducting RF linac. Successful operation will depend on effective HOM damping. It is planned to achieve HOM damping exclusively with ferrite absorbers. The performance of a prototype absorber was measured by transforming it into a resonant cavity and alternatively by a conventional wire method. The results expressed as a surface or R-square impedance are presented in this paper.

  10. Classical and quantum dynamics in an inverse square potential

    SciTech Connect

    Guillaumn-Espaa, Elisa; Nez-Ypez, H. N.; Salas-Brito, A. L.

    2014-10-15

    The classical motion of a particle in a 3D inverse square potential with negative energy, E, is shown to be geodesic, i.e., equivalent to the particle's free motion on a non-compact phase space manifold irrespective of the sign of the coupling constant. We thus establish that all its classical orbits with E < 0 are unbounded. To analyse the corresponding quantum problem, the Schrdinger equation is solved in momentum space. No discrete energy levels exist in the unrenormalized case and the system shows a complete fall-to-the-center with an energy spectrum unbounded by below. Such behavior corresponds to the non-existence of bound classical orbits. The symmetry of the problem is SO(3) SO(2, 1) corroborating previously obtained results.

  11. A Galerkin least squares approach to viscoelastic flow.

    SciTech Connect

    Rao, Rekha R.; Schunk, Peter Randall

    2015-10-01

    A Galerkin/least-squares stabilization technique is applied to a discrete Elastic Viscous Stress Splitting formulation of for viscoelastic flow. From this, a possible viscoelastic stabilization method is proposed. This method is tested with the flow of an Oldroyd-B fluid past a rigid cylinder, where it is found to produce inaccurate drag coefficients. Furthermore, it fails for relatively low Weissenberg number indicating it is not suited for use as a general algorithm. In addition, a decoupled approach is used as a way separating the constitutive equation from the rest of the system. A Pressure Poisson equation is used when the velocity and pressure are sought to be decoupled, but this fails to produce a solution when inflow/outflow boundaries are considered. However, a coupled pressure-velocity equation with a decoupled constitutive equation is successful for the flow past a rigid cylinder and seems to be suitable as a general-use algorithm.

  12. U.S. uranium drilling in footage, 2004-13

    Gasoline and Diesel Fuel Update

  13. Footage Drilled for Crude Oil and Natural Gas Wells

    Gasoline and Diesel Fuel Update

    Stocks 2010 2011 2012 2013 2014 2015 View History U.S. 40,534 39,717 37,768 27,121 20,275 18,133 1993-2015 PAD District 1 3,913 3,741 3,513 3,190 1,785 1,901 1993-2015 Connecticut 1993-2004 Delaware 1993-2009 Florida 586 734 747 545 397 652 1993-2015 Georgia 374 251 220 269 235 220 1993-2015 Maine 130 152 254 1993-2013 Maryland 1993-2008 Massachusetts 2 4 3 6 5 5 1993-2015 New Hampshire 1993-2005 New Jersey 667 275 795 489 102 384 1993-2015 New York 194 628 483 394 43 11 1993-2015 North

  14. Footage Drilled for Crude Oil and Natural Gas Wells

    Gasoline and Diesel Fuel Update

    Values shown for the current two months are preliminary. Values shown for the previous two months may be revised to account for late submissions and corrections. Final revisions to monthly and annual values are available upon publication of the June Petroleum Marketing Monthly. Annual averages that precede the release of the June Petroleum Marketing Monthly are calculated from monthly data. Data through 2015 are final. Effective January 2009, selected crude streams were discontinued and new

  15. Square Turing patterns in reaction-diffusion systems with coupled layers

    SciTech Connect

    Li, Jing; Wang, Hongli E-mail: qi@pku.edu.cn; Center for Quantitative Biology, Peking University, Beijing 100871 ; Ouyang, Qi E-mail: qi@pku.edu.cn; Center for Quantitative Biology, Peking University, Beijing 100871; The Peking-Tsinghua Center for Life Sciences, Beijing 100871

    2014-06-15

    Square Turing patterns are usually unstable in reaction-diffusion systems and are rarely observed in corresponding experiments and simulations. We report here an example of spontaneous formation of square Turing patterns with the Lengyel-Epstein model of two coupled layers. The squares are found to be a result of the resonance between two supercritical Turing modes with an appropriate ratio. Besides, the spatiotemporal resonance of Turing modes resembles to the mode-locking phenomenon. Analysis of the general amplitude equations for square patterns reveals that the fixed point corresponding to square Turing patterns is stationary when the parameters adopt appropriate values.

  16. The moving-least-squares-particle hydrodynamics method (MLSPH)

    SciTech Connect

    Dilts, G.

    1997-12-31

    An enhancement of the smooth-particle hydrodynamics (SPH) method has been developed using the moving-least-squares (MLS) interpolants of Lancaster and Salkauskas which simultaneously relieves the method of several well-known undesirable behaviors, including spurious boundary effects, inaccurate strain and rotation rates, pressure spikes at impact boundaries, and the infamous tension instability. The classical SPH method is derived in a novel manner by means of a Galerkin approximation applied to the Lagrangian equations of motion for continua using as basis functions the SPH kernel function multiplied by the particle volume. This derivation is then modified by simply substituting the MLS interpolants for the SPH Galerkin basis, taking care to redefine the particle volume and mass appropriately. The familiar SPH kernel approximation is now equivalent to a colocation-Galerkin method. Both classical conservative and recent non-conservative formulations of SPH can be derived and emulated. The non-conservative forms can be made conservative by adding terms that are zero within the approximation at the expense of boundary-value considerations. The familiar Monaghan viscosity is used. Test calculations of uniformly expanding fluids, the Swegle example, spinning solid disks, impacting bars, and spherically symmetric flow illustrate the superiority of the technique over SPH. In all cases it is seen that the marvelous ability of the MLS interpolants to add up correctly everywhere civilizes the noisy, unpredictable nature of SPH. Being a relatively minor perturbation of the SPH method, it is easily retrofitted into existing SPH codes. On the down side, computational expense at this point is significant, the Monaghan viscosity undoes the contribution of the MLS interpolants, and one-point quadrature (colocation) is not accurate enough. Solutions to these difficulties are being pursued vigorously.

  17. EECBG SEP Attachment 1 - Process metric list

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    10-07B/SEP 10-006A Attachment 1: Process Metrics List Metric Area Metric Primary or Optional Metric Item(s) to Report On 1. Building Retrofits 1a. Buildings retrofitted, by sector Number of buildings retrofitted Square footage of buildings retrofitted 1b. Energy management systems installed, by sector Number of energy management systems installed Square footage of buildings under management 1c. Building roofs retrofitted, by sector Number of building roofs retrofitted Square footage of building

  18. Residential Energy Consumption Survey (RECS) - Analysis & Projections -

    Gasoline and Diesel Fuel Update

    U.S. Energy Information Administration (EIA) Where does RECS square footage data come from? RECS 2009 - Release date: July 11, 2012 The size of a home is a fixed characteristic strongly associated with the amount of energy consumed within it, particularly for space heating, air conditioning, lighting, and other appliances. As a part of the Residential Energy Consumption Survey (RECS), trained interviewers measure the square footage of each housing unit. RECS square footage data allow

  19. Model Documentation Report: Residential Demand Module of the...

    Gasoline and Diesel Fuel Update

    (conditioned square footage) based on current Census Bureau data. * Revision of the benchmarking process that incorporates historical and near-term forecasted values. December 2012...

  20. Residential Demand Module of the National Energy Modeling System...

    Gasoline and Diesel Fuel Update

    (conditioned square footage) based on current Census Bureau data. * Revision of the benchmarking process that incorporates historical and near-term forecasted values. * Revision of...

  1. Presentation title: This can be up to 2 lines

    Annual Energy Outlook

    ... rates * Reconsider wood pricing and elasticity * Annual updates - ENERGY STAR homes (EPA) - Heating fuel shares in new construction (Census) - Square footage of new construction ...

  2. CD

    Annual Energy Outlook

    Square Footage, and Number of Workers in the Building.) Metal Panel: A wall construction panel made of aluminum or galvanized steel fabricated in factories and fastened to the...

  3. Key Meeting Takeaways from 2014 Meeting at Case Western and Changes...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    that low cost solutions (BEMOSS) are enabled by VOLTTRON. Could extrapolate using EUI cost, square footage, etc. and derive a national estimate * Navigant is also conducting ...

  4. Comment on ''Mutually unbiased bases, orthogonal Latin squares, and hidden-variable models''

    SciTech Connect

    Hall, Joanne L.; Rao, Asha

    2011-03-15

    In a recent article Paterek, Dakic, and Brukner [Phys. Rev. A 79, 012109 (2009)] show an algorithm for generating mutually unbiased bases from sets of orthogonal Latin squares. They claim that this algorithm works for every set of orthogonal Latin squares. We show that the algorithm only works for particular sets of orthogonal Latin squares. Furthermore, the algorithm is a more readable version of work previously published [Phys. Rev. A 70, 062101 (2004)].

  5. Table 4a. Total Fuel Oil Consumption per Effective Occupied Square...

    Annual Energy Outlook

    Table 4a. Total Fuel Oil Consumption per Effective Occupied Square Foot, 1992 Building Characteristics All Buildings Using Fuel Oil (thousand) Total Fuel Oil Consumption (trillion...

  6. New Better Buildings Challenge Partners Commit 70 Million Square Feet, $1.7

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Billion | Department of Energy Better Buildings Challenge Partners Commit 70 Million Square Feet, $1.7 Billion New Better Buildings Challenge Partners Commit 70 Million Square Feet, $1.7 Billion January 29, 2015 - 2:40pm Addthis News Media Contact 202-586-4940 DOENews@hq.doe.gov New Better Buildings Challenge Partners Commit 70 Million Square Feet, $1.7 Billion WASHINGTON - Building on President Obama's Climate Action Plan, the Energy Department announced today that more than 20 new partners

  7. Squaring the Circle in Biofuels? | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Squaring the Circle in Biofuels? Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events DOE Announcements Publications History Contact BES Home 04.30.14 Squaring the Circle in Biofuels? Print Text Size: A A A Subscribe FeedbackShare Page Researchers produce a new type of plant fiber that supports normal growth while easing the difficulties of conversion to fuel. This work, featured in the Office of Science's Stories of

  8. Better Buildings Challenge to Cut Energy Waste Grows by 1 Billion Square

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Feet | Department of Energy to Cut Energy Waste Grows by 1 Billion Square Feet Better Buildings Challenge to Cut Energy Waste Grows by 1 Billion Square Feet May 9, 2014 - 11:01am Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - Building on President Obama's Climate Action Plan and the Administration's Better Buildings Challenge, the Energy Department announced today that Better Buildings Challenge partners are on track to meet their energy performance goals in their second year, saving

  9. Squaring the Circle in Biofuels? | U.S. DOE Office of Science (SC)

    Office of Science (SC)

    Squaring the Circle in Biofuels? News News Home Featured Articles 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Science Headlines Science Highlights Presentations & Testimony News Archives Communications and Public Affairs Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 04.30.14 Squaring the Circle in Biofuels? Researchers produce a new type of plant fiber that supports normal growth while easing

  10. Magnetic vortex crystal formation in the antidot complement of square artificial spin ice

    SciTech Connect

    Araujo, C. I. L. de Silva, R. C.; Ribeiro, I. R. B.; Nascimento, F. S.; Felix, J. F.; Ferreira, S. O.; Moura-Melo, W. A.; Pereira, A. R.; Ml, L. A. S.

    2014-03-03

    We have studied ferromagnetic nickel thin films patterned with square lattices of elongated antidots that are negative analogues of square artificial spin ice. Micromagnetic simulations and direct current magnetic moment measurements reveal in-plane anisotropy of the magnetic hysteresis loops, and the formation of a dense array of magnetic vortices with random polarization and chirality. These multiply-connected antidot arrays could be superior to lattices of disconnected nanodisks for investigations of vortex switching by applied electric current.

  11. Optical Square-Wave Clock Generation Based on an All-Optical Flip-Flop

    SciTech Connect

    Kaplan, A.M.; Agrawal, G.P.; Maywar, D.N.

    2010-03-10

    We demonstrate optical square-wave clock generation based on an all-optical flip-flop. The bistable output power from a resonant-type semiconductor optical amplifier (SOA) is switched ON and OFF by modulating its input with its output via cross-gain modulation in a traveling-wave SOA. All active components are driven by dc currents, and the wavelength and clock frequency are selectable. A clock frequency of 3.5 MHz is demonstrated, limited by the time of flight between bulk optical components. Optical square-wave clock signals are promising for applications in photonic integrated circuits and all-optical signal processing.

  12. OpenEI:Projects/Geographic Pages | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    and per square foot: Total Electricity Use Total heating fuel use (or broken down by gasoil) Total building square footage HeatingCooling degree-days - This would allow us to...

  13. Method for exploiting bias in factor analysis using constrained alternating least squares algorithms

    DOEpatents

    Keenan, Michael R.

    2008-12-30

    Bias plays an important role in factor analysis and is often implicitly made use of, for example, to constrain solutions to factors that conform to physical reality. However, when components are collinear, a large range of solutions may exist that satisfy the basic constraints and fit the data equally well. In such cases, the introduction of mathematical bias through the application of constraints may select solutions that are less than optimal. The biased alternating least squares algorithm of the present invention can offset mathematical bias introduced by constraints in the standard alternating least squares analysis to achieve factor solutions that are most consistent with physical reality. In addition, these methods can be used to explicitly exploit bias to provide alternative views and provide additional insights into spectral data sets.

  14. Non-perturbative and self-consistent models of neutron stars in R-squared gravity

    SciTech Connect

    Yazadjiev, Stoytcho S.; Doneva, Daniela D.; Kokkotas, Kostas D.; Staykov, Kalin V. E-mail: daniela.doneva@uni-tuebingen.de E-mail: kalin.v.staikov@gmail.com

    2014-06-01

    In the present paper we investigate non-perturbatively and self-consistently the structure of neutron stars in R-squared gravity by simultaneously solving the interior and exterior problem. The mass-radius relations are obtained for several equations of state and for wide range of the R-squared gravity parameter a. Even though the deviation from general relativity for nonzero values of a can be large, they are still comparable with the variations due to different modern realistic equations of state. That is why the current observations of the neutron star masses and radii alone can not put constraints on the value of the parameter a. We also compare our results with those obtained within the perturbative method and we discuss the differences between them.

  15. Ballistic electrons in an open square geometry: Selective probing of resonant-energy states

    SciTech Connect

    Zozoulenko, I.V.; Schuster, R.; Berggren, K.-.; Ensslin, K.

    1997-04-01

    We report on the interplay between classical trajectories and quantum-mechanical effects in a square geometry. At low magnetic fields the four-terminal resistance is dominated by phenomena that depend on ballistic trajectories in a classical billiard. Superimposed on these classical effects are quantum interference effects manifested by highly periodic conductance oscillations. Numerical analysis shows that these oscillations are directly related to excitations of particular eigenstates in the square. In spite of open leads, transport through an open cavity is effectively mediated by just a few (or even a single) resonant-energy states. The leads injecting electrons into the cavity play a decisive role in a selection of the particular set of states excited in the dot. The above selection rule sets a specific frequency of the oscillations seen in the experiment. {copyright} {ital 1997} {ital The American Physical Society}

  16. Fast Combinatorial Algorithm for the Solution of Linearly Constrained Least Squares Problems

    DOEpatents

    Van Benthem, Mark H.; Keenan, Michael R.

    2008-11-11

    A fast combinatorial algorithm can significantly reduce the computational burden when solving general equality and inequality constrained least squares problems with large numbers of observation vectors. The combinatorial algorithm provides a mathematically rigorous solution and operates at great speed by reorganizing the calculations to take advantage of the combinatorial nature of the problems to be solved. The combinatorial algorithm exploits the structure that exists in large-scale problems in order to minimize the number of arithmetic operations required to obtain a solution.

  17. High-Frequency Matrix Converter with Square Wave Input - Energy Innovation

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Portal Solar Photovoltaic Solar Photovoltaic Geothermal Geothermal Energy Storage Energy Storage Electricity Transmission Electricity Transmission Find More Like This Return to Search High-Frequency Matrix Converter with Square Wave Input DOE Grant Recipients Contact GRANT About This Technology Publications: PDF Document Publication 8995159.pdf (1,648 KB) Technology Marketing Summary As the use of renewable energy sources increase, there is an increasing need for power converters capable of

  18. Interband magneto-spectroscopy in InSb square and parabolic quantum wells

    SciTech Connect

    Kasturiarachchi, T.; Edirisooriya, M.; Mishima, T. D.; Doezema, R. E.; Santos, M. B.; Saha, D.; Pan, X.; Sanders, G. D.; Stanton, C. J.

    2015-06-07

    We measure the magneto-optical absorption due to intersubband optical transitions between conduction and valence subband Landau levels in InSb square and parabolic quantum wells. InSb has the narrowest band gap (0.24 eV at low temperature) of the III–V semiconductors leading to a small effective mass (0.014 m{sub 0}) and a large g–factor (−51). As a result, the Landau level spacing is large at relatively small magnetic fields (<8 T), and one can observe spin-splitting of the Landau levels. We examine two structures: (i) a multiple-square-well structure and (ii) a structure containing multiple parabolic wells. The energies and intensities of the strongest features are well explained by a modified Pidgeon-Brown model based on an 8-band k•p model that explicitly incorporates pseudomorphic strain. The strain is essential for obtaining agreement between theory and experiment. While modeling the square well is relatively straight-forward, the parabolic well consists of 43 different layers of various thickness to approximate a parabolic potential. Agreement between theory and experiment for the parabolic well validates the applicability of the model to complicated structures, which demonstrates the robustness of our model and confirms its relevance for developing electronic and spintronic devices that seek to exploit the properties of the InSb band structure.

  19. New self-assembly luminescent molecular triangle and square rhenium(I) complexes

    SciTech Connect

    Sun, S.S.; Lees, A.J.

    1999-09-20

    The design and study of well-arranged metal-containing macrocycles is one of the major current research areas in modern supramolecular chemistry. Apart from their particular structural features, supramolecular species formed by self-assembly of transition metals introduce many special functional properties such as luminescence, redox activity, and magnetism into the structure. More recently, transition metal based molecular squares have been synthesized by utilizing self-assembly of preorganized metal centers and pyridine-based bridging ligands. The 90{degree} bonding angles between ligands in transition metal complexes provide an attractive feature for constructing macrocyclic structures.

  20. The effect of interelement dipole coupling in patterned ultrathin single crystal Fe square arrays

    SciTech Connect

    Sun Li; Zhai Ya; Wong Pingkwanj; Zhang Wen; Xu Yongbing; Zou Xiao; Wu Jing; Luo Linqiang; Zhai Hongru

    2011-02-01

    The correlation between the magnetic properties and the interelement separation in patterned arrays of ultrathin single crystal Fe films of 12 monolayers (ML) grown on GaAs(100) has been studied. The critical condition to form single domain remanent states in the square elements was found to be 10 {mu}m in size and 20 {mu}m for the interelement separation. The coercivity was also found to increase with the increasing interelement separation in the patterned arrays. These results are attributed to the competition between the large in-plane uniaxial anisotropy, the demagnetizing field, and interelement dipole coupling as determined semiqualitatively by the ferromagnetic resonance measurements.

  1. Transition to chaos in a square enclosure containing internal heat sources

    SciTech Connect

    Baytas, A.C.

    1995-09-01

    A numerical investigation is performed to study the transition from steady to chaotic flow of a fluid confined in a two-dimensional square cavity. The cavity has rigid walls of constant temperature containing uniformly distributed internal heat source. Effects of the Rayleigh number of flow and heat transfer rates are studied. In addition to, same problem is solved for sinusoidally changing internal heat source to show its effect on the flow model and heat transfer of the enclosures. Details of oscillatory solutions and flow bifurcations are presented.

  2. Review of the Palisades pressure vessel accumulated fluence estimate and of the least squares methodology employed

    SciTech Connect

    Griffin, P.J.

    1998-05-01

    This report provides a review of the Palisades submittal to the Nuclear Regulatory Commission requesting endorsement of their accumulated neutron fluence estimates based on a least squares adjustment methodology. This review highlights some minor issues in the applied methodology and provides some recommendations for future work. The overall conclusion is that the Palisades fluence estimation methodology provides a reasonable approach to a {open_quotes}best estimate{close_quotes} of the accumulated pressure vessel neutron fluence and is consistent with the state-of-the-art analysis as detailed in community consensus ASTM standards.

  3. Self-assembly molecular squares with metal complexes as bridging ligands

    SciTech Connect

    Sun, S.S.; Silva, A.S.; Brinn, I.M.; Lees, A.J.

    2000-04-03

    Polynuclear transition metal complexes containing multichromophoric units, such as metal polypyridyl complexes, are of considerable current interest. Much attention has been paid to the synthesis of multicomponent systems that exhibit photoinduced intercomponent electron and/or energy-transfer processes and to their potential applications for photonic and electronic devices. Systems incorporating Re(I)- Ru(II)-, and Os(II)-based polypyridyl chromophores are the most commonly studied because of their favorable redox and spectroscopic characteristics. In this communication, the authors combine the concepts of self-assembly and complexes as ligands and report the preparation of a series of molecular squares with the general molecular formula [fac-Br(CO){sub 3}Re({mu}-(pyterpy){sub 2}M)]{sub 4}(PF{sub 6}){sub 8}, where pyterpy is 4{prime}-(4{prime}{double_prime}-pyridyl)-2,2{prime}:6{prime}2{double_prime}-terpyridine and M = Fe, Ru, or Os. The spectroscopic properties and a preliminary anion binding study of these novel octanuclear molecular squares are also presented.

  4. Bifurcation to square-wave switching in orthogonally delay-coupled semiconductor lasers: Theory and experiment

    SciTech Connect

    Masoller, C.; Sukow, D.; Gavrielides, A.

    2011-08-15

    We analyze the dynamics of two semiconductor lasers with so-called orthogonal time-delayed mutual coupling: the dominant TE (x) modes of each laser are rotated by 90 deg. (therefore, TM polarization or y) before being coupled to the other laser. Although this laser system allows for steady-state emission in either one or in both polarization modes, it may also exhibit stable time-periodic dynamics including square waveforms. A theoretical mapping of the switching dynamics unveils the region in parameter space where one expects to observe long-term time-periodic mode switching. Detailed numerical simulations illustrate the role played by the coupling strength, the mode frequency detuning, or the mode gain to loss difference. We complement our theoretical study with several experiments and measurements. We present time series and intensity spectra associated with the characteristics of the square waves and other waveforms observed as a function of the strength of the delay coupling. The experimental observations are in very good agreement with the analysis and the numerical results.

  5. Differentially-charged and sequentially-switched square-wave pulse forming network

    DOEpatents

    North, G.G.; Vogilin, G.E.

    1980-04-01

    Disclosed is a pulse forming network for delivering a high-energy square-wave pulse to a load, including a series of inductive-capacitive sections wherein the capacitors are differentially charged higher further from the load. Each charged capacitor is isolated from adjacent sections and the load by means of a normally open switch at the output of each section. The switch between the load and the closest section to the load is closed to begin discharge of the capacitor in that section into the load. During discharge of each capacitor, the voltage thereacross falls to a predetermined potential with respect to the potential across the capacitor in the next adjacent section further from the load. When this potential is reached, it is used to close the switch in the adjacent section further from the load and thereby apply the charge in that section to the load through the adjacent section toward the load. Each successive section further from the load is sequentially switched in this manner to continuously and evenly supply energy to the load over the period of the pulse, with the differentially charged capacitors providing higher potentials away from the load to compensate for the voltage drop across the resistance of each inductor. This arrangement is low in cost and yet provides a high-energy pulse in an acceptable square-wave form. 5 figs.

  6. Differentially-charged and sequentially-switched square-wave pulse forming network

    DOEpatents

    North, George G. [Stockton, CA; Vogilin, George E. [Livermore, CA

    1980-04-01

    A pulse forming network for delivering a high-energy square-wave pulse to a load, including a series of inductive-capacitive sections wherein the capacitors are differentially charged higher further from the load. Each charged capacitor is isolated from adjacent sections and the load by means of a normally open switch at the output of each section. The switch between the load and the closest section to the load is closed to begin discharge of the capacitor in that section into the load. During discharge of each capacitor, the voltage thereacross falls to a predetermined potential with respect to the potential across the capacitor in the next adjacent section further from the load. When this potential is reached, it is used to close the switch in the adjacent section further from the load and thereby apply the charge in that section to the load through the adjacent section toward the load. Each successive section further from the load is sequentially switched in this manner to continuously and evenly supply energy to the load over the period of the pulse, with the differentially charged capacitors providing higher potentials away from the load to compensate for the voltage drop across the resistance of each inductor. This arrangement is low in cost and yet provides a high-energy pulse in an acceptable square-wave form.

  7. Optical pattern recognition architecture implementing the mean-square error correlation algorithm

    DOEpatents

    Molley, Perry A.

    1991-01-01

    An optical architecture implementing the mean-square error correlation algorithm, MSE=.SIGMA.[I-R].sup.2 for discriminating the presence of a reference image R in an input image scene I by computing the mean-square-error between a time-varying reference image signal s.sub.1 (t) and a time-varying input image signal s.sub.2 (t) includes a laser diode light source which is temporally modulated by a double-sideband suppressed-carrier source modulation signal I.sub.1 (t) having the form I.sub.1 (t)=A.sub.1 [1+.sqroot.2m.sub.1 s.sub.1 (t)cos (2.pi.f.sub.o t)] and the modulated light output from the laser diode source is diffracted by an acousto-optic deflector. The resultant intensity of the +1 diffracted order from the acousto-optic device is given by: I.sub.2 (t)=A.sub.2 [+2m.sub.2.sup.2 s.sub.2.sup.2 (t)-2.sqroot.2m.sub.2 (t) cos (2.pi.f.sub.o t] The time integration of the two signals I.sub.1 (t) and I.sub.2 (t) on the CCD deflector plane produces the result R(.tau.) of the mean-square error having the form: R(.tau.)=A.sub.1 A.sub.2 {[T]+[2m.sub.2.sup.2.multidot..intg.s.sub.2.sup.2 (t-.tau.)dt]-[2m.sub.1 m.sub.2 cos (2.tau.f.sub.o .tau.).multidot..intg.s.sub.1 (t)s.sub.2 (t-.tau.)dt]} where: s.sub.1 (t) is the signal input to the diode modulation source: s.sub.2 (t) is the signal input to the AOD modulation source; A.sub.1 is the light intensity; A.sub.2 is the diffraction efficiency; m.sub.1 and m.sub.2 are constants that determine the signal-to-bias ratio; f.sub.o is the frequency offset between the oscillator at f.sub.c and the modulation at f.sub.c +f.sub.o ; and a.sub.o and a.sub.1 are constant chosen to bias the diode source and the acousto-optic deflector into their respective linear operating regions so that the diode source exhibits a linear intensity characteristic and the AOD exhibits a linear amplitude characteristic.

  8. Simultaneous evaluation of interrelated cross sections by generalized least-squares and related data file requirements

    SciTech Connect

    Poenitz, W.P.

    1984-10-25

    Though several cross sections have been designated as standards, they are not basic units and are interrelated by ratio measurements. Moreover, as such interactions as /sup 6/Li + n and /sup 10/B + n involve only two and three cross sections respectively, total cross section data become useful for the evaluation process. The problem can be resolved by a simultaneous evaluation of the available absolute and shape data for cross sections, ratios, sums, and average cross sections by generalized least-squares. A data file is required for such evaluation which contains the originally measured quantities and their uncertainty components. Establishing such a file is a substantial task because data were frequently reported as absolute cross sections where ratios were measured without sufficient information on which reference cross section and which normalization were utilized. Reporting of uncertainties is often missing or incomplete. The requirements for data reporting will be discussed.

  9. Direct numerical simulation of turbulent flow in a rotating square duct

    SciTech Connect

    Dai, Yi-Jun; Huang, Wei-Xi Xu, Chun-Xiao; Cui, Gui-Xiang

    2015-06-15

    A fully developed turbulent flow in a rotating straight square duct is simulated by direct numerical simulations at Re{sub ?} = 300 and 0 ? Ro{sub ?} ? 40. The rotating axis is parallel to two opposite walls of the duct and normal to the main flow. Variations of the turbulence statistics with the rotation rate are presented, and a comparison with the rotating turbulent channel flow is discussed. Rich secondary flow patterns in the cross section are observed by varying the rotation rate. The appearance of a pair of additional vortices above the pressure wall is carefully examined, and the underlying mechanism is explained according to the budget analysis of the mean momentum equations.

  10. Multivariate analysis of remote LIBS spectra using partial least squares, principal component analysis, and related techniques

    SciTech Connect

    Clegg, Samuel M; Barefield, James E; Wiens, Roger C; Sklute, Elizabeth; Dyare, Melinda D

    2008-01-01

    Quantitative analysis with LIBS traditionally employs calibration curves that are complicated by the chemical matrix effects. These chemical matrix effects influence the LIBS plasma and the ratio of elemental composition to elemental emission line intensity. Consequently, LIBS calibration typically requires a priori knowledge of the unknown, in order for a series of calibration standards similar to the unknown to be employed. In this paper, three new Multivariate Analysis (MV A) techniques are employed to analyze the LIBS spectra of 18 disparate igneous and highly-metamorphosed rock samples. Partial Least Squares (PLS) analysis is used to generate a calibration model from which unknown samples can be analyzed. Principal Components Analysis (PCA) and Soft Independent Modeling of Class Analogy (SIMCA) are employed to generate a model and predict the rock type of the samples. These MV A techniques appear to exploit the matrix effects associated with the chemistries of these 18 samples.

  11. Spaser based on Fano resonance in a rod and concentric square ring-disk nanostructure

    SciTech Connect

    Huo, Y. Y.; Jia, T. Q. Zhao, H.; Zhang, S. A.; Feng, D. H.; Sun, Z. R.; Zhang, Y.

    2014-03-17

    This paper reports a spaser based on Fano resonance of a plasmonic nanostructure consisting of a rod and concentric square ring-disk structure coated with a layer of gain media. The amplification of the dark quadrupolar mode at the Fano resonance wavelength causes the spaser with a high Purcell factor of 3.24 × 10{sup 7}, a high signal to noise ratio of 4.4 × 10{sup 6}, and a lower threshold of 0.02086. These significant optical properties are attributed to the greatly enhanced spontaneous emission and depressed radiation loss supported by the strong localized dark mode at the Fano resonance wavelength.

  12. Spin-dependent Seebeck effects in a graphene nanoribbon coupled to two square lattice ferromagnetic leads

    SciTech Connect

    Zhou, Benhu Zeng, Yangsu; Zhou, Benliang; Zhou, Guanghui; Ouyang, Tao

    2015-03-14

    We theoretically investigate spin-dependent Seebeck effects for a system consisting of a narrow graphene nanoribbon (GNR) contacted to square lattice ferromagnetic (FM) electrodes with noncollinear magnetic moments. Both zigzag-edge graphene nanoribbons (ZGNRs) and armchair-edge graphene nanoribbons (AGNRs) were considered. Compared with our previous work with two-dimensional honeycomb-lattice FM leads, a more realistic model of two-dimensional square-lattice FM electrodes is adopted here. Using the nonequilibrium Green's function method combining with the tight-binding Hamiltonian, it is demonstrated that both the charge Seebeck coefficient S{sub C} and the spin-dependent Seebeck coefficient S{sub S} strongly depend on the geometrical contact between the GNR and the leads. In our previous work, S{sub C} for a semiconducting 15-AGNR system near the Dirac point is two orders of magnitude larger than that of a metallic 17-AGNR system. However, S{sub C} is the same order of magnitude for both metallic 17-AGNR and semiconducting 15-AGNR systems in the present paper because of the lack of a transmission energy gap for the 15-AGNR system. Furthermore, the spin-dependent Seebeck coefficient S{sub S} for the systems with 20-ZGNR, 17-AGNR, and 15-AGNR is of the same order of magnitude and its maximum absolute value can reach 8 μV/K. The spin-dependent Seebeck effects are not very pronounced because the transmission coefficient weakly depends on spin orientation. Moreover, the spin-dependent Seebeck coefficient is further suppressed with increasing angle between the relative alignments of magnetization directions of the two leads. Additionally, the spin-dependent Seebeck coefficient can be strongly suppressed for larger disorder strength. The results obtained here may provide valuable theoretical guidance in the experimental design of heat spintronic devices.

  13. Residential Energy Consumption Survey (RECS) - Analysis & Projections...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Where does RECS square footage data come from? July 11, 2012 RECS data show decreased energy consumption per household June 6, 2012 The impact of increasing home size on energy ...

  14. Design Data Exchange Helps AIA and Member Firms Track and Improve...

    Energy.gov [DOE] (indexed site)

    ... Otherwise it only sees groups of projects as lists of square footageEUI pairs-to ... in 2013. Average pEUI-predicted or design EUI-reduction also increased in 2014, from 34% ...

  15. Establishing Design Requirements for Energy

    Energy.gov [DOE]

    Programming defines details about the project, including square footage, types of building space, and use. The team should make decisions to define the energy needs of the building. Beyond...

  16. The tunneling solutions of the time-dependent Schroedinger equation for a square-potential barrier

    SciTech Connect

    Elci, A.; Hjalmarson, H. P.

    2009-10-15

    The exact tunneling solutions of the time-dependent Schroedinger equation with a square-potential barrier are derived using the continuous symmetry group G{sub S} for the partial differential equation. The infinitesimal generators and the elements for G{sub S} are represented and derived in the jet space. There exist six classes of wave functions. The representative (canonical) wave functions for the classes are labeled by the eigenvalue sets, whose elements arise partially from the reducibility of a Lie subgroup G{sub LS} of G{sub S} and partially from the separation of variables. Each eigenvalue set provides two or more time scales for the wave function. The ratio of two time scales can act as the duration of an intrinsic clock for the particle motion. The exact solutions of the time-dependent Schroedinger equation presented here can produce tunneling currents that are orders of magnitude larger than those produced by the energy eigenfunctions. The exact solutions show that tunneling current can be quantized under appropriate boundary conditions and tunneling probability can be affected by a transverse acceleration.

  17. Nanocluster building blocks of artificial square spin ice: Stray-field studies of thermal dynamics

    SciTech Connect

    Pohlit, Merlin Porrati, Fabrizio; Huth, Michael; Müller, Jens

    2015-05-07

    We present measurements of the thermal dynamics of a Co-based single building block of an artificial square spin ice fabricated by focused electron-beam-induced deposition. We employ micro-Hall magnetometry, an ultra-sensitive tool to study the stray field emanating from magnetic nanostructures, as a new technique to access the dynamical properties during the magnetization reversal of the spin-ice nanocluster. The obtained hysteresis loop exhibits distinct steps, displaying a reduction of their “coercive field” with increasing temperature. Therefore, thermally unstable states could be repetitively prepared by relatively simple temperature and field protocols allowing one to investigate the statistics of their switching behavior within experimentally accessible timescales. For a selected switching event, we find a strong reduction of the so-prepared states' “survival time” with increasing temperature and magnetic field. Besides the possibility to control the lifetime of selected switching events at will, we find evidence for a more complex behavior caused by the special spin ice arrangement of the macrospins, i.e., that the magnetic reversal statistically follows distinct “paths” most likely driven by thermal perturbation.

  18. Neutron diffraction studies of a four-coordinated hydride in near square-planar geometry

    SciTech Connect

    Liao, Jian -Hong; Dhayal, Rajendra Singh; Wang, Xiaoping; Kahlal, Samia; Saillard, Jean -Yves; Liu, C. W.

    2014-10-07

    The structure of a nanospheric polyhydrido copper cluster, [Cu20(H)11{S2P(OiPr)2}9], was determined by single-crystal neutron diffraction. Cu20 cluster consists of an elongated triangular orthobicupola constructed from 18 Cu atoms that encapsulate a [Cu2H5}3- ion in the center with an exceptionally short Cu-Cu distance. The eleven hydrides in the cluster display three different coordination modes to the Cu atoms: Six μ3-hydrides in pyramidal geometry, two μ4-hydrides in tetrahedral cavity, and three μ4-hydrides in an unprecedented near square-planar geometry. The neutron data set was collected on a small crystal of the size 0.20 mm x 0.50 mm x 0.65 mm for seven days using the Spallation Neutron Source TOPAZ single-crystal time-of-flight Laue diffractometer at the Oak Ridge National Laboratory. Furthermore, the final R-factor is 8.64% for 16014 reflections.

  19. Neutron diffraction studies of a four-coordinated hydride in near square-planar geometry

    DOE PAGES [OSTI]

    Liao, Jian -Hong; Dhayal, Rajendra Singh; Wang, Xiaoping; Kahlal, Samia; Saillard, Jean -Yves; Liu, C. W.

    2014-10-07

    The structure of a nanospheric polyhydrido copper cluster, [Cu20(H)11{S2P(OiPr)2}9], was determined by single-crystal neutron diffraction. Cu20 cluster consists of an elongated triangular orthobicupola constructed from 18 Cu atoms that encapsulate a [Cu2H5}3- ion in the center with an exceptionally short Cu-Cu distance. The eleven hydrides in the cluster display three different coordination modes to the Cu atoms: Six μ3-hydrides in pyramidal geometry, two μ4-hydrides in tetrahedral cavity, and three μ4-hydrides in an unprecedented near square-planar geometry. The neutron data set was collected on a small crystal of the size 0.20 mm x 0.50 mm x 0.65 mm for seven daysmore » using the Spallation Neutron Source TOPAZ single-crystal time-of-flight Laue diffractometer at the Oak Ridge National Laboratory. Furthermore, the final R-factor is 8.64% for 16014 reflections.« less

  20. Simulated Stochastic Approximation Annealing for Global Optimization with a Square-Root Cooling Schedule

    SciTech Connect

    Liang, Faming; Cheng, Yichen; Lin, Guang

    2014-06-13

    Simulated annealing has been widely used in the solution of optimization problems. As known by many researchers, the global optima cannot be guaranteed to be located by simulated annealing unless a logarithmic cooling schedule is used. However, the logarithmic cooling schedule is so slow that no one can afford to have such a long CPU time. This paper proposes a new stochastic optimization algorithm, the so-called simulated stochastic approximation annealing algorithm, which is a combination of simulated annealing and the stochastic approximation Monte Carlo algorithm. Under the framework of stochastic approximation Markov chain Monte Carlo, it is shown that the new algorithm can work with a cooling schedule in which the temperature can decrease much faster than in the logarithmic cooling schedule, e.g., a square-root cooling schedule, while guaranteeing the global optima to be reached when the temperature tends to zero. The new algorithm has been tested on a few benchmark optimization problems, including feed-forward neural network training and protein-folding. The numerical results indicate that the new algorithm can significantly outperform simulated annealing and other competitors.

  1. Searching for Minimum in Dependence of Squared Speed-of-Sound on Collision Energy

    DOE PAGES [OSTI]

    Liu, Fu-Hu; Gao, Li-Na; Lacey, Roy A.

    2016-01-01

    Experimore » mental results of the rapidity distributions of negatively charged pions produced in proton-proton ( p - p ) and beryllium-beryllium (Be-Be) collisions at different beam momentums, measured by the NA61/SHINE Collaboration at the super proton synchrotron (SPS), are described by a revised (three-source) Landau hydrodynamic model. The squared speed-of-sound parameter c s 2 is then extracted from the width of rapidity distribution. There is a local minimum (knee point) which indicates a softest point in the equation of state (EoS) appearing at about 40 A  GeV/ c (or 8.8 GeV) in c s 2 excitation function (the dependence of c s 2 on incident beam momentum (or center-of-mass energy)). This knee point should be related to the searching for the onset of quark deconfinement and the critical point of quark-gluon plasma (QGP) phase transition.« less

  2. U.S. Footage Drilled for Crude Oil, Natural Gas, and Dry Exploratory and

    Gasoline and Diesel Fuel Update

    See most recent version of AEO NEMS Documentation Module Current Previous Coal Market 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 Commercial Demand 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 Electricity Market 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 Industrial Demand 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 Integrating 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 International Energy 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005

  3. U.S. Footage Drilled for Crude Oil Developmental Wells (Thousand Feet)

    Gasoline and Diesel Fuel Update

    Separation, Proved Reserves (Billion Cubic Feet) Associated-Dissolved Natural Gas, Wet After Lease Separation, Proved Reserves (Billion Cubic Feet) U.S. Federal Offshore Associated-Dissolved Natural Gas, Wet After Lease Separation, Proved Reserves (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1990's 6,773 6,487 6,315 6,120 6,738 7,471 7,437 7,913 7,495 7,093 2000's 7,010 8,649 8,090 7,417 6,361 5,904 4,835 4,780 5,106 5,223 2010's 5,204

  4. U.S. Footage Drilled for Crude Oil, Natural Gas, and Dry Exploratory and

    Gasoline and Diesel Fuel Update

    Developmental Wells (Thousand Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1973 11,426 10,108 11,027 10,005 11,845 11,253 11,474 13,108 11,402 12,569 12,089 11,917 1974 12,015 10,950 12,805 13,188 13,147 12,441 13,830 12,701 12,661 13,803 12,600 13,233 1975 14,871 12,309 14,234 14,177 14,727 14,458 15,308 16,012 15,826 17,310 15,024 16,238 1976 17,592 14,050 15,622 14,925 14,206 15,326 14,884 16,098 15,861 16,635 15,852 15,931 1977 15,984 15,151 18,474 16,900 17,788 18,439

  5. An Inside Look at a MOF in Action

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... The molecular geometry of Mg-MOF-74, in which the (magnesium) metal atoms are centered in the base of a square pyramid with the apex site vacant, is especially selective for carbon ...

  6. Nonresidential buildings energy consumption survey: 1979 consumption and expenditures. Part 2. Steam, fuel oil, LPG, and all fuels

    SciTech Connect

    Patinkin, L.

    1983-12-01

    This report presents data on square footage and on total energy consumption and expenditures for commercial buildings in the contiguous United States. Also included are detailed consumption and expenditures tables for fuel oil or kerosene, liquid petroleum gas (LPG), and purchased steam. Commercial buildings include all nonresidential buildings with the exception of those where industrial activities occupy more of the total square footage than any other type of activity. 7 figures, 23 tables.

  7. Robust parallel iterative solvers for linear and least-squares problems, Final Technical Report

    SciTech Connect

    Saad, Yousef

    2014-01-16

    The primary goal of this project is to study and develop robust iterative methods for solving linear systems of equations and least squares systems. The focus of the Minnesota team is on algorithms development, robustness issues, and on tests and validation of the methods on realistic problems. 1. The project begun with an investigation on how to practically update a preconditioner obtained from an ILU-type factorization, when the coefficient matrix changes. 2. We investigated strategies to improve robustness in parallel preconditioners in a specific case of a PDE with discontinuous coefficients. 3. We explored ways to adapt standard preconditioners for solving linear systems arising from the Helmholtz equation. These are often difficult linear systems to solve by iterative methods. 4. We have also worked on purely theoretical issues related to the analysis of Krylov subspace methods for linear systems. 5. We developed an effective strategy for performing ILU factorizations for the case when the matrix is highly indefinite. The strategy uses shifting in some optimal way. The method was extended to the solution of Helmholtz equations by using complex shifts, yielding very good results in many cases. 6. We addressed the difficult problem of preconditioning sparse systems of equations on GPUs. 7. A by-product of the above work is a software package consisting of an iterative solver library for GPUs based on CUDA. This was made publicly available. It was the first such library that offers complete iterative solvers for GPUs. 8. We considered another form of ILU which blends coarsening techniques from Multigrid with algebraic multilevel methods. 9. We have released a new version on our parallel solver - called pARMS [new version is version 3]. As part of this we have tested the code in complex settings - including the solution of Maxwell and Helmholtz equations and for a problem of crystal growth.10. As an application of polynomial preconditioning we considered the

  8. Table 10.6 Solar Thermal Collector Shipments by Type, Price, and Trade, 1974-2009 (Thousand Square Feet, Except as Noted)

    Energy Information Administration (EIA) (indexed site)

    Solar Thermal Collector Shipments by Type, Price, and Trade, 1974-2009 (Thousand Square Feet, Except as Noted) Year Low-Temperature Collectors 1 Medium-Temperature Collectors 2 High-Temperature Collectors 3 Total Shipments Trade Number of U.S. Manu- facturers Quantity Shipped Shipments per Manu- facturer Price 4 (dollars 5 per square foot) Number of U.S. Manu- facturers Quantity Shipped Shipments per Manu- facturer Price 4 (dollars 5 per square foot) Quantity Shipped Price 4 (dollars 5 per

  9. Model-Based Least Squares Reconstruction of Coded Source Neutron Radiographs: Integrating the ORNL HFIR CG1D Source Model

    SciTech Connect

    Santos-Villalobos, Hector J; Gregor, Jens; Bingham, Philip R

    2014-01-01

    At the present, neutron sources cannot be fabricated small and powerful enough in order to achieve high resolution radiography while maintaining an adequate flux. One solution is to employ computational imaging techniques such as a Magnified Coded Source Imaging (CSI) system. A coded-mask is placed between the neutron source and the object. The system resolution is increased by reducing the size of the mask holes and the flux is increased by increasing the size of the coded-mask and/or the number of holes. One limitation of such system is that the resolution of current state-of-the-art scintillator-based detectors caps around 50um. To overcome this challenge, the coded-mask and object are magnified by making the distance from the coded-mask to the object much smaller than the distance from object to detector. In previous work, we have shown via synthetic experiments that our least squares method outperforms other methods in image quality and reconstruction precision because of the modeling of the CSI system components. However, the validation experiments were limited to simplistic neutron sources. In this work, we aim to model the flux distribution of a real neutron source and incorporate such a model in our least squares computational system. We provide a full description of the methodology used to characterize the neutron source and validate the method with synthetic experiments.

  10. A spectral mimetic least-squares method for the Stokes equations with no-slip boundary condition

    DOE PAGES [OSTI]

    Gerritsma, Marc; Bochev, Pavel

    2016-03-22

    Formulation of locally conservative least-squares finite element methods (LSFEMs) for the Stokes equations with the no-slip boundary condition has been a long standing problem. Existing LSFEMs that yield exactly divergence free velocities require non-standard boundary conditions (Bochev and Gunzburger, 2009 [3]), while methods that admit the no-slip condition satisfy the incompressibility equation only approximately (Bochev and Gunzburger, 2009 [4, Chapter 7]). Here we address this problem by proving a new non-standard stability bound for the velocity–vorticity–pressure Stokes system augmented with a no-slip boundary condition. This bound gives rise to a norm-equivalent least-squares functional in which the velocity can be approximatedmore » by div-conforming finite element spaces, thereby enabling a locally-conservative approximations of this variable. Here, we also provide a practical realization of the new LSFEM using high-order spectral mimetic finite element spaces (Kreeft et al., 2011) and report several numerical tests, which confirm its mimetic properties.« less

  11. Inflection points of microcanonical entropy: Monte Carlo simulation of q state Potts model on a finite square lattice

    SciTech Connect

    Praveen, E. Satyanarayana, S. V. M.

    2014-04-24

    Traditional definition of phase transition involves an infinitely large system in thermodynamic limit. Finite systems such as biological proteins exhibit cooperative behavior similar to phase transitions. We employ recently discovered analysis of inflection points of microcanonical entropy to estimate the transition temperature of the phase transition in q state Potts model on a finite two dimensional square lattice for q=3 (second order) and q=8 (first order). The difference of energy density of states (DOS) ? ln g(E) = ln g(E+ ?E) ?ln g(E) exhibits a point of inflexion at a value corresponding to inverse transition temperature. This feature is common to systems exhibiting both first as well as second order transitions. While the difference of DOS registers a monotonic variation around the point of inflexion for systems exhibiting second order transition, it has an S-shape with a minimum and maximum around the point of inflexion for the case of first order transition.

  12. Study of radial growth rate and size control of silicon nanocrystals in square-wave-modulated silane plasmas

    SciTech Connect

    Nguyen-Tran, Th.; Roca i Cabarrocas, P.; Patriarche, G.

    2007-09-10

    The growth of silicon nanocrystals in high pressure and high dilution silane plasmas is investigated by using the temporal evolution of the self-bias on the radio frequency electrode and transmission electron microscopy. A square-wave-modulated plasma was used in order to control the growth of monodispersed nanoparticles with sizes smaller than 12 nm. To this end, the plasma on time was kept below 1 s. The radial growth rate of nanoparticles was varied in the range from 7.5 to 75 nm/s by changing silane partial pressure. Nanoparticles grown in silane-helium discharges have been found amorphous while they are crystalline in silane-hydrogen-argon discharges. Surprisingly, the crystallization in the gaseous phase does not depend on how slow or fast the particles grow but on the presence of atomic hydrogen.

  13. Width dependent transition of quantized spin-wave modes in Ni{sub 80}Fe{sub 20} square nanorings

    SciTech Connect

    Banerjee, Chandrima; Saha, Susmita; Barman, Saswati; Barman, Anjan, E-mail: abarman@bose.res.in [Thematic Unit of Excellence on Nanodevice Technology, Department of Condensed Matter Physics and Material Sciences, S. N. Bose National Centre for Basic Sciences, Block JD, Sector III, Salt Lake, Kolkata 700098 (India); Rousseau, Olivier [CEMS-RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Otani, YoshiChika [CEMS-RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Institute for Solid State Physics, University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8581 (Japan)

    2014-10-28

    We investigated optically induced ultrafast magnetization dynamics in square shaped Ni{sub 80}Fe{sub 20} nanorings with varying ring width. Rich spin-wave spectra are observed whose frequencies showed a strong dependence on the ring width. Micromagnetic simulations showed different types of spin-wave modes, which are quantized upto very high quantization number. In the case of widest ring, the spin-wave mode spectrum shows quantized modes along the applied field direction, which is similar to the mode spectrum of an antidot array. As the ring width decreases, additional quantization in the azimuthal direction appears causing mixed modes. In the narrowest ring, the spin-waves exhibit quantization solely in azimuthal direction. The different quantization is attributed to the variation in the internal field distribution for different ring width as obtained from micromagnetic analysis and supported by magnetic force microscopy.

  14. Concord Four Square Retrofit

    SciTech Connect

    2010-07-09

    This case study describes the retrofit of a home in West Concord, Massachusetts that proved that a 50% reduction in home energy use could be met today in existing housing.

  15. 1020 One Energy Square

    Office of Environmental Management (EM)

    ... - the transmission voltage class from 69 kilovolts to 525 kilovolts. These power generating units range from 20 to 300 megawatts. The adaptable transformer design allows WATTSTOCK ...

  16. Energy Information Administration (EIA) (indexed site)

    CFMSQF2N Confirm square feet $YESNO15. SQFT2 Square footage SQFT15. ALT2N Additions or substantial alterations $YESNO15. ALTSQF2N Add or subtract square footage $ALTSQF15 INSR2M Roof or ceiling insulation $YESNO15. INSW2M Exterior wall insulation $YESNO15. STRIP2 Weather stripping added since 1/1/80 $YESNO15. INSULR2M Insulation added to roof since 1/1/80 $YESNO15. INSULW2M Insulation added to walls since 1/1/80 $YESNO15. ADDGLS2N Conservation glass added since 1/1/80 $YESNO15. ADIN2N Adding

  17. Theoretical and experimental analysis of AlGaInP micro-LED array with square-circle anode

    SciTech Connect

    Tian, Chao; Wang, Weibiao Liang, Jingqiu Liang, Zhongzhu; Qin, Yuxin; Lv, Jinguang

    2015-04-15

    An array of 320 × 240 micro-light-emitting diodes (micro-LEDs) based on an AlGaInP epitaxial wafer and with a unit size of 100 µm×100 µm was designed and fabricated. The optimum width of the isolation groove between adjacent light-emitting units was determined based on a compromise between full isolation of each LED and maximization of the light emitting area, and was found to be 20 µm. The grooves were filled with a mixed Si granule-polyurethane composite medium, because this type of insulating material can reflect part of the emitted light from the sidewall to the window layer in each light-emitting unit, and could thus improve lighting output efficiency. The 10-µm-wide square-circle anode was designed to increase the light emitting area while simultaneously being simple to fabricate. The device current used was in the 0.42–1.06 mA range to guarantee internal quantum efficiency of more than 85%, with a corresponding voltage range of 2–2.3 V. The layered temperature distribution in a single unit was simulated under a drive voltage of 2.2 V, and the maximum device temperature was 341 K. The micro-opto-electro-mechanical systems (MOEMS) technology-based fabrication process, experimental images of the device and device test results are presented here.

  18. Analysis of carbon-oxygen reactions by use of a square-input response technique and {sup 18}O isotope

    SciTech Connect

    Miura, Kouichi; Nakagawa, Hiroyuki

    1996-12-31

    Carbon gasification reaction has been investigated for decades including the pioneering works of Walker and his co-workers, but its mechanism has not been completely elucidated. The concept of the active surface area (ASA) was proposed by them, and its importance has been recognized. However, since ASA was measured by O{sub 2} chemisorption at below 300{degrees}C where carbon loss through gasification is negligible, it does not reflect the actual gasification situation. To overcome this weak point, measurements of ASA in a batch reactor and the so-called transient kinetic (TK) method were proposed. Ahmed and Back successfully measured the chemisorbed oxygen during the gasification using a batch reactor, and proposed a new mechanistic sequence for carbon-oxygen reaction which stresses the importance of the reaction between the gaseous oxygen and the chemisorbed oxygen. Radovic et al. proposed the concept of the reactive surface area (RSA), and reported excellent proportionality between the CO{sub 2} gasification rate and the RSA estimated by the TK and the TPD methods. Kapteijn et al. showed that the TK method with labeled molecules is more powerful to examine the mechanism. They found the presence of two types of surface oxygen complexes which desorb at different rates. A Square-input response (SIR) method is applied to the carbon-oxygen reaction. This method allows the observation of transient changes on two step changes. This method has been successfully applied to the analysis of a coal char gasification.

  19. Ionic liquid-assisted preparation of square-shaped Y{sub 2}O{sub 3} nanoplates

    SciTech Connect

    Wang, Lei; Fang, Hao; Xu, Hualan; Wang, Caoli; Li, Yuanjin; Liu, Yang; Zhong, Shengliang

    2015-01-15

    Highlights: • Y{sub 4}O(OH){sub 9}(NO{sub 3}) nanosheets were prepared by an ionic liquid-assisted mixed solvothermal route. • Y{sub 2}O{sub 3} nanosheets were obtained after calcining the Y{sub 4}O(OH){sub 9}(NO{sub 3}) nanosheets. • The Y{sub 2}O{sub 3} nanosheets are with length of about 300 nm and thickness of several nanometers. - Abstract: Uniform square-shaped Y{sub 4}O(OH){sub 9}(NO{sub 3}) nanoplates with side length of about 300 nm and thickness of tens of nanometers have been successfully prepared by an ionic liquid-assisted mixed solvothermal route. Y{sub 2}O{sub 3} nanoplates with similar size were obtained after calcining the Y{sub 4}O(OH){sub 9}(NO{sub 3}) nanoplates at 800 °C. The products were analyzed by powder X-ray diffraction (XRD), thermogravimetric analysis (TG), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution TEM (HRTEM), and electron diffraction (ED). The effects of reaction time, composition of solvents, and the molar ratio of reagents on the morphology of the products have been investigated. The possible formation mechanism of the Y{sub 4}O(OH){sub 9}(NO{sub 3}) nanoplates was also discussed. Y{sub 2}O{sub 3}:Eu{sup 3+} nanoplates were also synthesized and their photoluminescent properties were examined.

  20. SU-F-18C-14: Hessian-Based Norm Penalty for Weighted Least-Square CBCT Reconstruction

    SciTech Connect

    Sun, T; Sun, N; Tan, S; Wang, J

    2014-06-15

    Purpose: To develop a Hessian-based norm penalty for cone-beam CT (CBCT) reconstruction that has a similar ability in suppressing noise as the total variation (TV) penalty while avoiding the staircase effect and better preserving low-contrast objects. Methods: We extended the TV penalty to a Hessian-based norm penalty based on the Frobenius norm of the Hessian matrix of an image for CBCT reconstruction. The objective function was constructed using the penalized weighted least-square (PWLS) principle. An effective algorithm was developed to minimize the objective function using a majorization-minimization (MM) approach. We evaluated and compared the proposed penalty with the TV penalty on a CatPhan 600 phantom and an anthropomorphic head phantom, each acquired at a low-dose protocol (10mA/10ms) and a high-dose protocol (80mA/12ms). For both penalties, contrast-to-noise (CNR) in four low-contrast regions-of-interest (ROIs) and the full-width-at-half-maximum (FWHM) of two point-like objects in constructed images were calculated and compared. Results: In the experiment of CatPhan 600 phantom, the Hessian-based norm penalty has slightly higher CNRs and approximately equivalent FWHM values compared with the TV penalty. In the experiment of the anthropomorphic head phantom at the low-dose protocol, the TV penalty result has several artificial piece-wise constant areas known as the staircase effect while in the Hessian-based norm penalty the image appears smoother and more similar to that of the FDK result using the high-dose protocol. Conclusion: The proposed Hessian-based norm penalty has a similar performance in suppressing noise to the TV penalty, but has a potential advantage in suppressing the staircase effect and preserving low-contrast objects. This work was supported in part by National Natural Science Foundation of China (NNSFC), under Grant Nos. 60971112 and 61375018, and Fundamental Research Funds for the Central Universities, under Grant No. 2012QN086.

  1. On square-integrability of solutions of the stationary Schrödinger equation for the quantum harmonic oscillator in two dimensional constant curvature spaces

    SciTech Connect

    Noguera, Norman; Rózga, Krzysztof

    2015-07-15

    In this work, one provides a justification of the condition that is usually imposed on the parameters of the hypergeometric equation, related to the solutions of the stationary Schrödinger equation for the harmonic oscillator in two-dimensional constant curvature spaces, in order to determine the solutions which are square-integrable. One proves that in case of negative curvature, it is a necessary condition of square integrability and in case of positive curvature, a necessary condition of regularity. The proof is based on the analytic continuation formulas for the hypergeometric function. It is observed also that the same is true in case of a slightly more general potential than the one for harmonic oscillator.

  2. Energy Information Administration (EIA) (indexed site)

    IMPYR1 Imputed year built $YESNO15. IMPYRC1 Imputed year category $YESNO15. IMPPG1 Imputed over 50% glass $YESNO15. IMPPGC1 Imputed over 25/75% glass $YESNO15. IMPNOF1 Imputed number of floors $YESNO15. IMPSF1 Imputed square footage $YESNO15. IMPSFC1 Imputed square footage cat. $YESNO15. IMPNW1 Imputed no. of workers $YESNO15. IMPNWC1 Imputed no. of workers cat. $YESNO15. IMPMON1 Imputed Monday schedule $YESNO15. IMPTUE1 Imputed Tuesday schedule $YESNO15. IMPWED1 Imputed Wednesday schedule

  3. Energy Information Administration (EIA) (indexed site)

    IMPYR2 Imputed year built $YESNO15. IMPYRC2 Imputed year category $YESNO15. IMPPG2 Imputed over 50% glass $YESNO15. IMPPGC2 Imputed over 25/75% glass $YESNO15. IMPNOF2 Imputed number of floors $YESNO15. IMPSF2 Imputed square footage $IMPSF26. IMPSFC2 Imputed square footage cat. $IMPSF26. IMPNW2 Imputed no. of workers $IMPNW19. IMPNWC2 Imputed no. of workers cat. $YESNO15. IMPMON2 Imputed Monday schedule $YESNO15. IMPTUE2 Imputed Tuesday schedule $YESNO15. IMPWED2 Imputed Wednesday schedule

  4. Energy Information Administration (EIA) (indexed site)

    SQFT1T Square footage (from 1979) SQFT15. SQFTC1T Square footage (from 1979) $SQFTC17. HEATP1T Percent of building heated in 1979 MISS3CH15 COOLP1T Percent air conditioned in 1979 MISS3CH15 ELUSED1T Electricity reported in 1979 $YESNO15. NGUSED1T Natural gas reported in 1979 $YESNO15. FKUSED1T Fuel/kerosene reported in 1979 $YESNO15. STUSED1T Purchased steam reported in 1979 $YESNO15. CWUSED1T Purch. chilled water reported in 1979 $YESNO15. COUSED1T Coal reported in 1979 $YESNO15. PRUSED1T

  5. Preliminary Release: April 19, 2012

    Energy Information Administration (EIA) (indexed site)

    Total Square Footage of U.S. Homes, by Housing Characteristics, 2009" " Final" ,,"Total Square Footage" ,"Housing Units1","Total2","Heated","Cooled" "Housing Characteristics","Millions","Billions","Billions","Billions" "Total",113.6,223.9,186.8,139.8 "Census Region" "Northeast",20.8,44.1,34.5,19.1 "Midwest",25.9,58.9,49.2,35.6

  6. Preliminary Release: April 19, 2012

    Energy Information Administration (EIA) (indexed site)

    2 Total Square Footage of Northeast Homes, by Housing Characteristics, 2009" " Final" ,,"Total Square Footage" ,"Housing Units1","Total2","Heated","Cooled" "Housing Characteristics","Millions","Billions","Billions","Billions" "Total Northeast",20.8,44.1,34.5,19.1 "Northeast Divisions and States" "New England",5.5,12.3,9.3,3.4

  7. Preliminary Release: April 19, 2012

    Energy Information Administration (EIA) (indexed site)

    4 Total Square Footage of South Homes, by Housing Characteristics, 2009" " Final" ,,"Total Square Footage" ,"Housing Units1","Total2","Heated","Cooled" "Housing Characteristics","Millions","Billions","Billions","Billions" "Total South",42.1,78.6,68.9,65.2 "South Divisions and States" "South Atlantic",22.2,43.2,37.5,35.5

  8. Preliminary Release: April 19, 2012

    Energy Information Administration (EIA) (indexed site)

    7 Total Square Footage of Multi-Family Homes, by Housing Characteristics, 2009" " Final" ,,"Total Square Footage" ,"Housing Units1","Total2","Heated","Cooled" "Housing Characteristics","Millions","Billions","Billions","Billions" "Total Multi-Family",28.1,26.1,22.7,15.1 "Census Region" "Northeast",7.6,7.5,6.8,3.1 "Midwest",5.6,5.4,4.8,2.9

  9. Preliminary Release: April 19, 2012

    Energy Information Administration (EIA) (indexed site)

    8 Total Square Footage of Mobile Homes, by Housing Characteristics, 2009" " Final" ,,"Total Square Footage" ,"Housing Units1","Total2","Heated","Cooled" "Housing Characteristics","Millions","Billions","Billions","Billions" "Total Mobile Homes",6.9,7.5,6.8,5.2 "Census Region" "Northeast",0.5,0.5,0.5,0.4 "Midwest",1.1,1.2,1.1,0.6

  10. DOE Challenge Home Verification

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOE Challenge Home Verification Projected Rating: Based on Plans - Field Confirmation Required. Energy Performance House Ty pe DOE Challenge Home Builder Partner ID# Single-family det ac hed 12345 Y ear built Square footage of Conditioned Space including Basement 2013 3968.0 Numbe r of Bedrooms Square footage of Conditioned Space without Basement 4 2368.0 Site addre ss (if no t available , list the site Lo t #) Registered Builder 555 Main St r eet Cold City Certified Rater MN, 20853 HERS Index

  11. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    0 Commercial Buildings Energy Consumption and Expenditure Indicators, Selected Years, 1979-2003 Buildings by Energy Source Used Consumption Consumption per Square Foot Square Footage per Building by Expenditures Expenditures Per Square Foot Energy Source Used 62 U.S. Energy Information Administration / Annual Energy Review 2011 1 Electricity only; excludes electrical system energy losses. 2 Distillate fuel oil, residual fuel oil, and kerosene. 3 Prices are not adjusted for inflation. See

  12. Table 10.7 Solar Thermal Collector Shipments by Market Sector, End Use, and Type, 2001-2009 (Thousand Square Feet)

    Energy Information Administration (EIA) (indexed site)

    Solar Thermal Collector Shipments by Market Sector, End Use, and Type, 2001-2009 (Thousand Square Feet) Year and Type By Market Sector By End Use Total Residential Commercial 1 Industrial 2 Electric Power 3 Other 4 Pool Heating Water Heating Space Heating Space Cooling Combined Heating 5 Process Heating Electricity Generation Total Shipments 6<//td> 2001 Total 10,125 1,012 17 1 35 10,797 274 70 0 12 34 2 11,189 Low 7 9,885 987 12 0 34 10,782 42 61 0 0 34 0 10,919 Medium 8 240 24 5 0 1 16

  13. Two-dimensional equations of the surface harmonics method for solving problems of spatial neutron kinetics in square-lattice reactors

    SciTech Connect

    Boyarinov, V. F. Kondrushin, A. E. Fomichenko, P. A.

    2014-12-15

    Two-dimensional time-dependent finite-difference equations of the surface harmonics method (SHM) for the description of the neutron transport are derived for square-lattice reactors. These equations are implemented in the SUHAM-TD code. Verification of the derived equations and the developed code are performed by the example of known test problems, and the potential and efficiency of the SHM as applied to the solution of the time-dependent neutron transport equation in the diffusion approximation in two-dimensional geometry are demonstrated. These results show the substantial advantage of SHM over direct finite-difference modeling in computational costs.

  14. A Search for WIMP Dark Matter Using an Optimized Chi-square Technique on the Final Data from the Cryogenic Dark Matter Search Experiment (CDMS II)

    SciTech Connect

    Manungu Kiveni, Joseph

    2012-12-01

    This dissertation describes the results of a WIMP search using CDMS II data sets accumulated at the Soudan Underground Laboratory in Minnesota. Results from the original analysis of these data were published in 2009; two events were observed in the signal region with an expected leakage of 0.9 events. Further investigation revealed an issue with the ionization-pulse reconstruction algorithm leading to a software upgrade and a subsequent reanalysis of the data. As part of the reanalysis, I performed an advanced discrimination technique to better distinguish (potential) signal events from backgrounds using a 5-dimensional chi-square method. This dataanalysis technique combines the event information recorded for each WIMP-search event to derive a backgrounddiscrimination parameter capable of reducing the expected background to less than one event, while maintaining high efficiency for signal events. Furthermore, optimizing the cut positions of this 5-dimensional chi-square parameter for the 14 viable germanium detectors yields an improved expected sensitivity to WIMP interactions relative to previous CDMS results. This dissertation describes my improved (and optimized) discrimination technique and the results obtained from a blind application to the reanalyzed CDMS II WIMP-search data.

  15. Pb{sub 5}Fe{sub 3}TiO{sub 11}Cl: A rare example of Ti(IV) in a square pyramidal oxygen coordination

    SciTech Connect

    Batuk, Maria; Batuk, Dmitry; Abakumov, Artem M.; Hadermann, Joke

    2014-07-01

    A new oxychloride Pb{sub 5}Fe{sub 3}TiO{sub 11}Cl has been synthesized using the solid state method. Its crystal and magnetic structure was investigated in the 1.5–550 K temperature range using electron diffraction, high angle annular dark field scanning transmission electron microscopy, atomic resolution energy dispersive X-ray spectroscopy, neutron and X-ray powder diffraction. At room temperature Pb{sub 5}Fe{sub 3}TiO{sub 11}Cl crystallizes in the P4/mmm space group with the unit cell parameters a=3.91803(3) Å and c=19.3345(2) Å. Pb{sub 5}Fe{sub 3}TiO{sub 11}Cl is a new n=4 member of the oxychloride perovskite-based homologous series A{sub n+1}B{sub n}O{sub 3n−1}Cl. The structure is built of truncated Pb{sub 3}Fe{sub 3}TiO{sub 11} quadruple perovskite blocks separated by CsCl-type Pb{sub 2}Cl slabs. The perovskite blocks consist of two layers of (Fe,Ti)O{sub 6} octahedra sandwiched between two layers of (Fe,Ti)O{sub 5} square pyramids. The Ti{sup 4+} cations are preferentially located in the octahedral layers, however, the presence of a noticeable amount of Ti{sup 4+} in a five-fold coordination environment has been undoubtedly proven using neutron powder diffraction and atomic resolution compositional mapping. Pb{sub 5}Fe{sub 3}TiO{sub 11}Cl is antiferromagnetically ordered below 450(10) K. The ordered Fe magnetic moments at 1.5 K are 4.06(4) μ{sub B} and 3.86(5) μ{sub B} on the octahedral and square-pyramidal sites, respectively. - Highlights: • Pb{sub 5}Fe{sub 3}TiO{sub 11}Cl has been synthesized using the solid state method. • The structure has been refined using neutron powder diffraction data at 1.5–550 K. • It is a new n=4 member of the perovskite-related homologous series A{sub n+1}B{sub n}O{sub 3n−1}Cl. • Ti{sup 4+} cations have both octahedral and square-pyramidal coordination environment. • Pb{sub 5}Fe{sub 3}TiO{sub 11}Cl is antiferromagnetically ordered below T{sub N}≈450 K.

  16. High-Performance and Sustainable Buildings Guidance (Final, 2008)

    Energy.gov [DOE]

    Document updates the "Guiding Principles for Sustainable New Construction and Major Renovations," establishes a separate "Guiding Principles for Sustainable Existing Buildings," clarifies reporting guidelines, and explains how to calculate the percentage of buildings square footage that are compliant with the Guiding Principles.

  17. Annual Greenhouse Gas and Sustainability Data Report

    Energy.gov [DOE]

    This Excel workbook (version 7.0) is a tool to use for comprehensive reporting of fiscal year 2016 for energy, costs, square footage, and associated operational data for calculating and reporting greenhouse gas data. This document is to be used by top-tier Federal departments and agencies.

  18. Uncertainty in least-squares fits to the thermal noise spectra of nanomechanical resonators with applications to the atomic force microscope

    SciTech Connect

    Sader, John E.; Yousefi, Morteza; Friend, James R.; Melbourne Centre for Nanofabrication, Clayton, Victoria 3800

    2014-02-15

    Thermal noise spectra of nanomechanical resonators are used widely to characterize their physical properties. These spectra typically exhibit a Lorentzian response, with additional white noise due to extraneous processes. Least-squares fits of these measurements enable extraction of key parameters of the resonator, including its resonant frequency, quality factor, and stiffness. Here, we present general formulas for the uncertainties in these fit parameters due to sampling noise inherent in all thermal noise spectra. Good agreement with Monte Carlo simulation of synthetic data and measurements of an Atomic Force Microscope (AFM) cantilever is demonstrated. These formulas enable robust interpretation of thermal noise spectra measurements commonly performed in the AFM and adaptive control of fitting procedures with specified tolerances.

  19. High-throughput prediction of Acacia and eucalypt lignin syringyl/guaiacyl content using FT-Raman spectroscopy and partial least squares modeling

    DOE PAGES [OSTI]

    Lupoi, Jason S.; Healey, Adam; Singh, Seema; Sykes, Robert; Davis, Mark; Lee, David J.; Shepherd, Merv; Simmons, Blake A.; Henry, Robert J.

    2015-01-16

    High-throughput techniques are necessary to efficiently screen potential lignocellulosic feedstocks for the production of renewable fuels, chemicals, and bio-based materials, thereby reducing experimental time and expense while supplanting tedious, destructive methods. The ratio of lignin syringyl (S) to guaiacyl (G) monomers has been routinely quantified as a way to probe biomass recalcitrance. Mid-infrared and Raman spectroscopy have been demonstrated to produce robust partial least squares models for the prediction of lignin S/G ratios in a diverse group of Acacia and eucalypt trees. The most accurate Raman model has now been used to predict the S/G ratio from 269 unknown Acaciamore » and eucalypt feedstocks. This study demonstrates the application of a partial least squares model composed of Raman spectral data and lignin S/G ratios measured using pyrolysis/molecular beam mass spectrometry (pyMBMS) for the prediction of S/G ratios in an unknown data set. The predicted S/G ratios calculated by the model were averaged according to plant species, and the means were not found to differ from the pyMBMS ratios when evaluating the mean values of each method within the 95 % confidence interval. Pairwise comparisons within each data set were employed to assess statistical differences between each biomass species. While some pairwise appraisals failed to differentiate between species, Acacias, in both data sets, clearly display significant differences in their S/G composition which distinguish them from eucalypts. In conclusion, this research shows the power of using Raman spectroscopy to supplant tedious, destructive methods for the evaluation of the lignin S/G ratio of diverse plant biomass materials.« less

  20. High-throughput prediction of Acacia and eucalypt lignin syringyl/guaiacyl content using FT-Raman spectroscopy and partial least squares modeling

    SciTech Connect

    Lupoi, Jason S.; Healey, Adam; Singh, Seema; Sykes, Robert; Davis, Mark; Lee, David J.; Shepherd, Merv; Simmons, Blake A.; Henry, Robert J.

    2015-01-16

    High-throughput techniques are necessary to efficiently screen potential lignocellulosic feedstocks for the production of renewable fuels, chemicals, and bio-based materials, thereby reducing experimental time and expense while supplanting tedious, destructive methods. The ratio of lignin syringyl (S) to guaiacyl (G) monomers has been routinely quantified as a way to probe biomass recalcitrance. Mid-infrared and Raman spectroscopy have been demonstrated to produce robust partial least squares models for the prediction of lignin S/G ratios in a diverse group of Acacia and eucalypt trees. The most accurate Raman model has now been used to predict the S/G ratio from 269 unknown Acacia and eucalypt feedstocks. This study demonstrates the application of a partial least squares model composed of Raman spectral data and lignin S/G ratios measured using pyrolysis/molecular beam mass spectrometry (pyMBMS) for the prediction of S/G ratios in an unknown data set. The predicted S/G ratios calculated by the model were averaged according to plant species, and the means were not found to differ from the pyMBMS ratios when evaluating the mean values of each method within the 95 % confidence interval. Pairwise comparisons within each data set were employed to assess statistical differences between each biomass species. While some pairwise appraisals failed to differentiate between species, Acacias, in both data sets, clearly display significant differences in their S/G composition which distinguish them from eucalypts. In conclusion, this research shows the power of using Raman spectroscopy to supplant tedious, destructive methods for the evaluation of the lignin S/G ratio of diverse plant biomass materials.

  1. From square-well to Janus: Improved algorithm for integral equation theory and comparison with thermodynamic perturbation theory within the Kern-Frenkel model

    SciTech Connect

    Giacometti, Achille; Gögelein, Christoph; Lado, Fred; Sciortino, Francesco; Ferrari, Silvano

    2014-03-07

    Building upon past work on the phase diagram of Janus fluids [F. Sciortino, A. Giacometti, and G. Pastore, Phys. Rev. Lett. 103, 237801 (2009)], we perform a detailed study of integral equation theory of the Kern-Frenkel potential with coverage that is tuned from the isotropic square-well fluid to the Janus limit. An improved algorithm for the reference hypernetted-chain (RHNC) equation for this problem is implemented that significantly extends the range of applicability of RHNC. Results for both structure and thermodynamics are presented and compared with numerical simulations. Unlike previous attempts, this algorithm is shown to be stable down to the Janus limit, thus paving the way for analyzing the frustration mechanism characteristic of the gas-liquid transition in the Janus system. The results are also compared with Barker-Henderson thermodynamic perturbation theory on the same model. We then discuss the pros and cons of both approaches within a unified treatment. On balance, RHNC integral equation theory, even with an isotropic hard-sphere reference system, is found to be a good compromise between accuracy of the results, computational effort, and uniform quality to tackle self-assembly processes in patchy colloids of complex nature. Further improvement in RHNC however clearly requires an anisotropic reference bridge function.

  2. A chi-square goodness-of-fit test for non-identically distributed random variables: with application to empirical Bayes

    SciTech Connect

    Conover, W.J.; Cox, D.D.; Martz, H.F.

    1997-12-01

    When using parametric empirical Bayes estimation methods for estimating the binomial or Poisson parameter, the validity of the assumed beta or gamma conjugate prior distribution is an important diagnostic consideration. Chi-square goodness-of-fit tests of the beta or gamma prior hypothesis are developed for use when the binomial sample sizes or Poisson exposure times vary. Nine examples illustrate the application of the methods, using real data from such diverse applications as the loss of feedwater flow rates in nuclear power plants, the probability of failure to run on demand and the failure rates of the high pressure coolant injection systems at US commercial boiling water reactors, the probability of failure to run on demand of emergency diesel generators in US commercial nuclear power plants, the rate of failure of aircraft air conditioners, baseball batting averages, the probability of testing positive for toxoplasmosis, and the probability of tumors in rats. The tests are easily applied in practice by means of corresponding Mathematica{reg_sign} computer programs which are provided.

  3. Sustainable Federal Buildings 2016 Guiding Principles

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sustainable Federal Buildings 2016 Guiding Principles 1  Executive Order 13693 section 3(h)(ii) states that agencies will identify "...a percentage of at least 15 percent, by number or total square footage," of their "existing buildings above 5,000 gross square feet (GSF) that will, by fiscal year 2025, comply with the revised Guiding Principles for Federal Leadership in...Sustainable Buildings (Guiding Principles)...and making annual progress toward 100 percent conformance

  4. A laser gyro with a four-mirror square resonator: formulas for simulating the dynamics of the synchronisation zone parameters of the frequencies of counterpropagating waves during the device operation in the self-heating regime

    SciTech Connect

    Bondarenko, E A

    2014-04-28

    For a laser gyro with a four-mirror square resonator we have developed a mathematical model, which allows one to simulate the temporal behaviour of the synchronisation zone parameters of the frequencies of counterpropagating waves in a situation when the device operates in the self-heating regime and is switched-on at different initial temperatures. (laser gyroscopes)

  5. A VIRTUAL SKY WITH EXTRAGALACTIC H I AND CO LINES FOR THE SQUARE KILOMETRE ARRAY AND THE ATACAMA LARGE MILLIMETER/SUBMILLIMETER ARRAY

    SciTech Connect

    Obreschkow, D.; Kloeckner, H.-R.; Heywood, I.; Rawlings, S.; Levrier, F.

    2009-10-01

    We present a sky simulation of the atomic H I-emission line and the first 10 {sup 12}C{sup 16}O rotational emission lines of molecular gas in galaxies beyond the Milky Way. The simulated sky field has a comoving diameter of 500 h {sup -1} Mpc; hence, the actual field of view depends on the (user-defined) maximal redshift z {sub max}; e.g., for z {sub max} = 10, the field of view yields approx4 x 4 deg{sup 2}. For all galaxies, we estimate the line fluxes, line profiles, and angular sizes of the H I and CO-emission lines. The galaxy sample is complete for galaxies with cold hydrogen masses above 10{sup 8} M {sub sun}. This sky simulation builds on a semi-analytic model of the cosmic evolution of galaxies in a LAMBDA cold dark matter (LAMBDACDM) cosmology. The evolving CDM distribution was adopted from the Millennium Simulation, an N-body CDM simulation in a cubic box with a side length of 500 h {sup -1} Mpc. This side length limits the coherence scale of our sky simulation: it is long enough to allow the extraction of the baryon acoustic oscillations in the galaxy power spectrum, yet the position and amplitude of the first acoustic peak will be imperfectly defined. This sky simulation is a tangible aid to the design and operation of future telescopes, such as the Square Kilometre Array, Large Millimeter Telescope, and Atacama Large Millimeter/Submillimeter Array. The results presented in this paper have been restricted to a graphical representation of the simulated sky and fundamental dN/dz analyses for peak flux density limited and total flux limited surveys of H I and CO. A key prediction is that H I will be harder to detect at redshifts z approx> 2 than predicted by a no-evolution model. The future verification or falsification of this prediction will allow us to qualify the semi-analytic models.

  6. Potential energy surface fitting by a statistically localized, permutationally invariant, local interpolating moving least squares method for the many-body potential: Method and application to N{sub 4}

    SciTech Connect

    Bender, Jason D.; Doraiswamy, Sriram; Candler, Graham V. E-mail: candler@aem.umn.edu; Truhlar, Donald G. E-mail: candler@aem.umn.edu

    2014-02-07

    Fitting potential energy surfaces to analytic forms is an important first step for efficient molecular dynamics simulations. Here, we present an improved version of the local interpolating moving least squares method (L-IMLS) for such fitting. Our method has three key improvements. First, pairwise interactions are modeled separately from many-body interactions. Second, permutational invariance is incorporated in the basis functions, using permutationally invariant polynomials in Morse variables, and in the weight functions. Third, computational cost is reduced by statistical localization, in which we statistically correlate the cutoff radius with data point density. We motivate our discussion in this paper with a review of global and local least-squares-based fitting methods in one dimension. Then, we develop our method in six dimensions, and we note that it allows the analytic evaluation of gradients, a feature that is important for molecular dynamics. The approach, which we call statistically localized, permutationally invariant, local interpolating moving least squares fitting of the many-body potential (SL-PI-L-IMLS-MP, or, more simply, L-IMLS-G2), is used to fit a potential energy surface to an electronic structure dataset for N{sub 4}. We discuss its performance on the dataset and give directions for further research, including applications to trajectory calculations.

  7. Characterization of the antiferromagnetism in Ag(pyz)2(S2O8) with a two-dimensional square lattice of Ag 2+ ions (Ag=silver, Pyz-pyrdzine, S2O8=sulfate)

    SciTech Connect

    Singleton, John; Mc Donald, R; Sengupta, P; Cox, S; Manson, J; Southerland, H; Warter, M; Stone, K; Stephens, P; Lancaster, T; Steele, A; Blundell, S; Baker, P; Pratt, F; Lee, C; Whangbo, M

    2009-01-01

    X-ray powder diffraction and magnetic susceptibility measurements show that Ag(pyz){sub 2}(S{sub 2}O{sub 8}) consists of 2D square nets of Ag{sup 2+} ions resulting from the corner-sharing of axially elongated AgN{sub 4}O{sub 2} octahedra and exhibits characteristic 2D antiferromagnetism. Nevertheless, {mu}{sup +}Sr measurements indicate that Ag(pyz){sub 2}(S{sub 2}O{sub 8}) undergoes 3D magnetic ordering below 7.8(3) K.

  8. Buildings Energy Data Book: 3.8 Hospitals and Medical Facilities

    Buildings Energy Data Book

    2 Inpatient Medical Facilities Square Footage, Delivered Energy, Energy Intensity, Selected Years (billion) 1999 1.87 0.43 229.0 2003 1.91 0.48 249.3 2008 2.15 0.45 210.1 2010 2.24 0.48 213.7 2015 2.45 0.51 208.2 2020 2.66 0.54 202.9 2025 2.88 0.56 194.8 2030 3.09 0.59 190.9 2035 3.30 0.61 184.6 Source(s): Total Square Footage Energy Use Energy Intensity (quadrillion Btus) (thousand Btus/SF) EIA, The Commercial Energy Consumption Survey 2003, Table A2, Census Region, Number of Buildings and

  9. Building America Case Study: Low-Load Space-Conditioning Needs Assessment, Northeast and Mid-Atlantic (Fact Sheet), Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Low-Load Space-Conditioning Needs Assessment Northeast and Mid-Atlantic PROJECT INFORMATION Construction: New Type: Multifamily apartments, attached single-family dwellings Consortium for Advanced Residential Buildings, carb-swa.com Building Component: Space conditioning Size: 209 ft 2 -2,895 ft 2 Climate Zones: Cold, mixed-humid DATABASE ATTRIBUTES * Dwelling unit characteristics: Location, floor level, position, square footage, volume, total and exposed enclosure area, window-to-wall ratio,

  10. Building on Success

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    on Success Sandia facilities meet diverse needs for national security, research and partnerships Sandia National Laboratories' state-of-the-art facilities represent a unique set of scientific and engineering resources. They serve Sandia's national security mission and research needs. Certain facilities also are available to industry, academia, other laboratories, state and local governments and the broader scientific community. And, more than 10 percent of Sandia's building square footage is

  11. " Row: NAICS Codes;"

    Energy Information Administration (EIA) (indexed site)

    9.1 Enclosed Floorspace and Number of Establishment Buildings, 2010;" " Level: National Data; " " Row: NAICS Codes;" " Column: Floorspace and Buildings;" " Unit: Floorspace Square Footage and Building Counts." ,,"Approximate",,,"Approximate","Average" ,,"Enclosed Floorspace",,"Average","Number","Number" ,,"of All Buildings",,"Enclosed Floorspace","of All

  12. DOE Zero Energy Ready Home Verification Summary

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Zero Energy Ready Home Verification Summary DRAFT REM/Rate - Residential Energy Analysis and Rating Software v14.5.1 This information does not constitute any warranty of energy cost or savings. © 1985-2014 Architectural Energy Corporation, Boulder, Colorado. Projected Rating: Based on Plans - Field Confirmation Required. Energy Performance House Type DOE Zero Energy Ready Home Builder Partner ID# Single-family detached 12345 Year built Square footage of Conditioned Space including Basement 2013

  13. The State of General Purpose Infrastructure (Nov 2016) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy The State of General Purpose Infrastructure (Nov 2016) The State of General Purpose Infrastructure (Nov 2016) The Department of Energy (DOE) is responsible for a vast portfolio of infrastructure that consists of world-leading scientific and production tools and the general purpose infrastructure needed to enable the use of those tools. DOE has the fourth largest inventory of real property in the Federal government by square footage, and its complex includes seventeen DOE National

  14. Residential Energy Consumption Survey (RECS) - Analysis & Projections -

    Gasoline and Diesel Fuel Update

    U.S. Energy Information Administration (EIA) The impact of increasing home size on energy demand RECS 2009 - Release date: April 19, 2012 Homes built since 1990 are on average 27% larger than homes built in earlier decades, a significant trend because most energy end-uses are correlated with the size of the home. As square footage increases, the burden on heating and cooling equipment rises, lighting requirements increase, and the likelihood that the household uses more than one refrigerator

  15. Partially-reflected water-moderated square-piteched U(6.90)O2 fuel rod lattices with 0.67 fuel to water volume ratio (0.800 CM Pitch)

    SciTech Connect

    Harms, Gary A.

    2015-09-01

    The US Department of Energy (DOE) Nuclear Energy Research Initiative funded the design and construction of the Seven Percent Critical Experiment (7uPCX) at Sandia National Laboratories. The start-up of the experiment facility and the execution of the experiments described here were funded by the DOE Nuclear Criticality Safety Program. The 7uPCX is designed to investigate critical systems with fuel for light water reactors in the enrichment range above 5% 235U. The 7uPCX assembly is a water-moderated and -reflected array of aluminum-clad square-pitched U(6.90%)O2 fuel rods.

  16. Kennett Square, Pennsylvania: Energy Resources | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 39.8467767, -75.7116032 Show Map Loading map... "minzoom":false,"mappingservice":"googlemaps3","type"...

  17. Square Engineering Pvt Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Product: Fabrication and erection contractor; has a manufacturing contract with Green & Gold Energy of Australia for the SunCube PV concentrator system, under which it will build a...

  18. SHERATON STATION SQUARE FLOOR PLAN FIRST FLOOR

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Slipstream Pilot-Scale Demonstration of a Novel Amine-Based Post-Combustion Process Technology for CO 2 Capture from Coal-Fired Power Plant Flue Gas (FE0007453) Krish ...

  19. Buildings Energy Data Book: 2.3 Residential Sector Expenditures

    Buildings Energy Data Book

    1 2005 Energy Expenditures per Household, by Housing Type and Square Footage ($2010) Per Household Single-Family 1.16 Detached 1.16 Attached 1.20 Multi-Family 1.66 2 to 4 units 1.90 5 or more units 1.53 Mobile Home 1.76 All Homes 1.12 Note(s): Source(s): 1) Energy expenditures per square foot were calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was

  20. Testimonials - Partnerships in R&D - Legrand | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    followed by "John Selldorff, President & CEO, Legrand" and footage of a man in a lab. ... Footage of a lab, followed by footage of a man on a forklift. One of the things that we ...

  1. United States Department of Energy

    Energy.gov [DOE] (indexed site)

    receipt of video footage in response to his February 13, 2013, FOIA Request; however, he states that this footage was insufficient because it did not include the footage shown in...

  2. Testimonials - Partnerships in Solar Technologies - SRI International...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    by "Curtis Carlson, Vice Chairman for Innovation, SRI International" and footage of a man. ... looking at them, followed by footage of a man conducting research in a laboratory. ...

  3. Residential Energy Consumption Survey (RECS) - Analysis & Projections -

    Energy Information Administration (EIA) (indexed site)

    U.S. Energy Information Administration (EIA) About the RECS RECS Survey Forms RECS Maps RECS Terminology Archived Reports Has your home been selected for the RECS? State fact sheets Arizona household graph See state fact sheets › 2009 RECS Features Heating and cooling no longer majority of U.S. home energy use March 7, 2013 Newer U.S. homes are 30% larger but consume about as much energy as older homes February 12, 2013 Where does RECS square footage data come from? July 11, 2012 RECS data

  4. T:\ClearanceEMEUConsumption\cbecs\pubuse86\txt\cb86sasfmt&layout.txt

    Energy Information Administration (EIA) (indexed site)

    6/txt/cb86sasfmt&layout.txt[3/17/2009 4:43:14 PM] File 1: Summary File (cb86f01.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. Metropolitan statistical area MSA3 25- 25 $MSA. Climate zone CLIMATE3 27- 27 $CLIMAT. B-1 Square footage SQFT3 29- 35

  5. Building America Top Innovations 2013 Profile … Buried and Encapsulated Ducts

    Energy Saver

    This Building America-developed technique allows ducts installed in a vented attic to match the performance of ducts in conditioned space. For years builders have designed their homes with the HVAC ducts in the attic. There is plenty of space up there to run the ducts, and if the air handler is located in the attic as well, it is not taking up valuable square footage inside the home. The only problem is vented attics can be very hot in the summer and very cold in the winter. Estimated thermal

  6. Data Center Energy Efficiency and Renewable Energy Site Assessment: Anderson Readiness Center; Salem, Oregon

    SciTech Connect

    Metzger, I.; Van Geet, O.

    2014-06-01

    This report summarizes the results from the data center energy efficiency and renewable energy site assessment conducted for the Oregon Army National Guard in Salem, Oregon. A team led by NREL conducted the assessment of the Anderson Readiness Center data centers March 18-20, 2014 as part of ongoing efforts to reduce energy use and incorporate renewable energy technologies where feasible. Although the data centers in this facility account for less than 5% of the total square footage, they are estimated to be responsible for 70% of the annual electricity consumption.

  7. Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PROGRAM The Drive for Net-Zero Energy Commercial Buildings Drury B. Crawley, Ph.D. U.S. Department of Energy Energy Efficiency and Renewable Energy Net-Zero Energy Commercial Building Initiative commercialbuildings.energy.gov 1 gy y gy Buildings' Energy Use Net-Zero Energy Commercial Building Initiative commercialbuildings.energy.gov 2 Commercial Square Footage Projections g j 104 Plus ~38B ft. 2 new additions 72 82 66 Minus ~16B ft. 2 demolitions 66 Net-Zero Energy Commercial Building

  8. Energy Information Administration (EIA) (indexed site)

    File02: (file02_cb83.csv) BLDGID2 Building ID STR402 Half-sample stratum PAIR402 Half-sample pair number SQFTC2 Square footage $SQFTC17. BCWM2C Principal activity $BCWOM25. YRCONC2C Year constructed $YRCONC15 REGION2 Census region $REGION13 XSECWT2 Cross-sectional weight ELSUPL2N Supplier reported electricity use $YESNO15. NGSUPL2N Supplier reported natural gas use $YESNO15. FKSUPL2N Supplier reported fuel oil use $YESNO15. STSUPL2N Supplier reported steam use $YESNO15. PRSUPL2N Supplier

  9. Energy Information Administration (EIA) (indexed site)

    File02: (file02_cb83.csv) BLDGID2 Building ID STR402 Half-sample stratum PAIR402 Half-sample pair number SQFTC2 Square footage $SQFTC17. BCWM2C Principal activity $BCWOM25. YRCONC2C Year constructed $YRCONC15 REGION2 Census region $REGION13 XSECWT2 Cross-sectional weight ELSUPL2N Supplier reported electricity use $YESNO15. NGSUPL2N Supplier reported natural gas use $YESNO15. FKSUPL2N Supplier reported fuel oil use $YESNO15. STSUPL2N Supplier reported steam use $YESNO15. PRSUPL2N Supplier

  10. Energy Information Administration (EIA) (indexed site)

    File 2: Building Activity (cb86f02.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. B-3 Any residential use RESUSE3 28- 28 $YESNO. B-4 Percent residential RESPC3 30- 30 $RESPC. Principal building activity PBA3 32-

  11. Energy Information Administration (EIA) (indexed site)

    5: End Uses of Major Energy Sources (cb86f05.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year construction was completed YRCONC3 31- 32 $YRCONC.

  12. Energy Information Administration (EIA) (indexed site)

    6: End Uses of Minor Energy Sources (cb86f06.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year construction was completed YRCONC3 31- 32 $YRCONC.

  13. Energy Information Administration (EIA) (indexed site)

    File10: District Steam and Hot Water (cb86f10.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year construction was completed YRCONC3 31- 32 $YRCONC.

  14. Energy Information Administration (EIA) (indexed site)

    1: Propane and District Chilled Water (cb86f11.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year construction was completed YRCONC3 31- 32 $YRCONC.

  15. Energy Information Administration (EIA) (indexed site)

    File 11: District Steam and Hot Water (CBECS89.A11) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format CASEID Building identifier BLDGID4 1- 5 Census region REGION4 7- 7 $REGION. Census division CENDIV4 9- 9 $CENDIV. B2 Square footage SQFTC4 11- 12 $SQFTC. Principal building activity PBA4 14- 15 $ACTIVTY. F3 Year construction was completed YRCONC4 17- 18 $YRCONC. Adjusted weight ADJWT4 20- 27 Variance stratum STRATUM4 29- 30 Pair indicator PAIR4 32- 32

  16. Energy Information Administration (EIA) (indexed site)

    File 12: District Chilled Water (CBECS89.A12) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format CASEID Building identifier BLDGID4 1- 5 Census region REGION4 7- 7 $REGION. Census division CENDIV4 9- 9 $CENDIV. B2 Square footage SQFTC4 11- 12 $SQFTC. Principal building activity PBA4 14- 15 $ACTIVTY. F3 Year construction was completed YRCONC4 17- 18 $YRCONC. Adjusted weight ADJWT4 20- 27 Variance stratum STRATUM4 29- 30 Pair indicator PAIR4 32- 32

  17. Energy Information Administration (EIA) (indexed site)

    File 14: Imputation Flags for End Uses (CBECS89.A14) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format CASEID Building identifier BLDGID4 1- 5 Census region REGION4 7- 7 $REGION. Census division CENDIV4 9- 9 $CENDIV. B2 Square footage SQFTC4 11- 12 $SQFTC. Principal building activity PBA4 14- 15 $ACTIVTY. F3 Year construction was completed YRCONC4 17- 18 $YRCONC. Imputed main heating ZHT14 20- 20 $ZVAR. Imputed secondary heating ZHT24 22- 22 $ZVAR.

  18. Energy Information Administration (EIA) (indexed site)

    5: End Uses of Major Energy Sources (CBECS89.A05) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format CASEID Building identifier BLDGID4 1- 5 Census region REGION4 7- 7 $REGION. Census division CENDIV4 9- 9 $CENDIV. B2 Square footage SQFTC4 11- 12 $SQFTC. Principal building activity PBA4 14- 15 $ACTIVTY. C3AA Electricity used for main heating ELHT14 17- 17 $XXSUPL. C3BA Electricity used for secondary heating ELHT24 19- 19 $XXSUPL. C3CA Electricity used for

  19. Energy Information Administration (EIA) (indexed site)

    6: End Uses of Minor Energy Sources (CBECS89.A06) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format CASEID Building identifier BLDGID4 1- 5 Census region REGION4 7- 7 $REGION. Census division CENDIV4 9- 9 $CENDIV. B2 Square footage SQFTC4 11- 12 $SQFTC. Principal building activity PBA4 14- 15 $ACTIVTY. C1D Propane used in past 12 months PRUSED4 17- 17 $YESNO. C3AD Propane used for main heating PRHT14 19- 19 $YESNO. C3BD Propane used for secondary heating

  20. Table 2.9 Commercial Buildings Consumption by Energy Source, Selected Years, 1979-2003 (Trillion Btu)

    Energy Information Administration (EIA) (indexed site)

    9 Commercial Buildings Consumption by Energy Source, Selected Years, 1979-2003 (Trillion Btu) Energy Source and Year Square Footage Category Principal Building Activity Census Region 1 All Buildings 1,001 to 10,000 10,001 to 100,000 Over 100,000 Education Food Sales Food Service Health Care Lodging Mercantile and Service Office All Other Northeast Midwest South West Major Sources 2 1979 1,255 2,202 1,508 511 [3] 336 469 278 894 861 1,616 1,217 1,826 1,395 526 4,965 1983 1,242 1,935 1,646 480 [3]

  1. Table HC1.1.1 Housing Unit Characteristics by

    Energy Information Administration (EIA) (indexed site)

    1 Housing Unit Characteristics by" " Total, Heated, and Cooled Floorspace, 2005" ,,,"Total Square Footage" ,"Housing Units",,"Total",,"Heated",,"Cooled" "Housing Unit Characteristics","Millions","Percent","Billions","Percent","Billions","Percent","Billions","Percent" "Total",111.1,100,256.5,100,179.8,100,114.5,100 "Census Region

  2. Table HC1.2.1. Living Space Characteristics by

    Energy Information Administration (EIA) (indexed site)

    1. Living Space Characteristics by" " Total, Heated, and Cooled Floorspace, 2005" ,,,"Total Square Footage" ,"Housing Units",,"Total1",,"Heated",,"Cooled" "Living Space Characteristics","Millions","Percent","Billions","Percent","Billions","Percent","Billions","Percent" "Total",111.1,100,225.8,100,179.8,100,114.5,100 "Total

  3. Residential Energy Consumption Survey (RECS) - U.S. Energy Information

    Gasoline and Diesel Fuel Update

    Administration (EIA) About the RECS RECS Survey Forms RECS Maps RECS Terminology Archived Reports Has your home been selected for the RECS? State fact sheets Arizona household graph See state fact sheets › 2009 RECS Features Heating and cooling no longer majority of U.S. home energy use March 7, 2013 Newer U.S. homes are 30% larger but consume about as much energy as older homes February 12, 2013 Where does RECS square footage data come from? July 11, 2012 RECS data show decreased energy

  4. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    1 Table 2.9 Commercial Buildings Consumption by Energy Source, Selected Years, 1979-2003 (Trillion Btu) Energy Source and Year Square Footage Category Principal Building Activity Census Region 1 All Buildings 1,001 to 10,000 10,001 to 100,000 Over 100,000 Education Food Sales Food Service Health Care Lodging Mercantile and Service Office All Other Northeast Midwest South West Major Sources 2 1979 ................ 1,255 2,202 1,508 511 3 ( ) 336 469 278 894 861 1,616 1,217 1,826 1,395 526 4,965

  5. New Better Buildings Challenge Partners Commit 70 Million Square...

    Energy Saver

    Ernest Moniz. "Joining hundreds of other organizations, these new partners are taking action to save money by saving energy, while also cutting carbon pollution and creating jobs." ...

  6. From OO to FPGA : fitting round objects into square hardware.

    SciTech Connect

    Kou, Stephen; Palsberg, Jens; Brooks, Jeffrey

    2012-09-01

    Consumer electronics today such as cell phones often have one or more low-power FPGAs to assist with energy-intensive operations in order to reduce overall energy consumption and increase battery life. However, current techniques for programming FPGAs require people to be specially trained to do so. Ideally, software engineers can more readily take advantage of the benefits FPGAs offer by being able to program them using their existing skills, a common one being object-oriented programming. However, traditional techniques for compiling object-oriented languages are at odds with today's FPGA tools, which support neither pointers nor complex data structures. Open until now is the problem of compiling an object-oriented language to an FPGA in a way that harnesses this potential for huge energy savings. In this paper, we present a new compilation technique that feeds into an existing FPGA tool chain and produces FPGAs with up to almost an order of magnitude in energy savings compared to a low-power microprocessor while still retaining comparable performance and area usage.

  7. Word in the Square: Conversation Monitoring and Analysis Report

    Energy.gov [DOE]

    Prepared for the Hydrogen Education Foundation December 10, 2007. This report summarizes online discussions about hydrogen within the context of alternative energy, environment, technology and sustainability. This report focuses on the online discussions for the month of November 2007.

  8. The inverse-square law and quantum gravity

    SciTech Connect

    Nieto, M.M.; Goldman, T.; Hughes, R.J.

    1988-01-01

    This paper briefly discusses a modification to central potential of gravity when antimatter is involved and the possible existence of quantum gravity and a fifth force of nature. 1 ref. (LSP)

  9. Nanocluster building blocks of artificial square spin ice: Stray...

    Office of Scientific and Technical Information (OSTI)

    Author Affiliations Institute of Physics, Goethe-University Frankfurt, FrankfurtMain (Germany) Laboratory for Nanoelectronics and Spintronics, Research Institute of Electrical...

  10. Real and effective thermal equilibrium in artificial square spin...

    Office of Scientific and Technical Information (OSTI)

    Publication Date: 2013-01-09 OSTI Identifier: 1101866 Type: Publisher's Accepted Manuscript Journal Name: Physical Review B Additional Journal Information: Journal Volume: 87; ...

  11. Word in the Square: Conversation Monitoring and Analysis Report...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Prepared for the Hydrogen Education Foundation December 10, 2007. This report summarizes online discussions about hydrogen within the context of alternative energy, environment, ...

  12. DOE's Disposition of Excess Real Property Status of Banked Square...

    Energy.gov [DOE] (indexed site)

    ... Banked 4,045 EM ETTP Site Net Banked 4,465,778 EM ETEC Site Net Banked 96,315 EM Grand Junction Net Banked 0 EM INL Site Net Banked 657,823 EM LLNL Site Net Banked 27,371 EM LANL ...

  13. Solar design T-square | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Type: Training materials, Video Website: www.youtube.comusergaiatechnician Cost: Free References: Solar design Jig1 About A series of videos describing how to create a...

  14. MC Squared Energy Services, LLC | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    2010 - File1a1 EIA Form 861 Data Utility Id 56379 Utility Location Yes Ownership R RTO PJM Yes Operates Generating Plant Yes Activity Retail Marketing Yes This article is a...

  15. Figure 3. PCs and Terminals per Million Square Feet, 1995

    Energy Information Administration (EIA) (indexed site)

    File Last Modified: April 20, 1999 Contact: alan.swenson@eia.doe.gov Alan Swenson URL: consumptioncommercialdataarchivecbecsconsumptionbriefssqft1995.htm For help...

  16. Testimonials - Partnerships in Solid-State Lighting - Cree, Inc...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Advanced Opto Electronics Technology, Cree, Inc." and footage of a man in a showcase room. ... Footage of a man in lab opening a consule full of lights in a lab, followed by a variety ...

  17. Sekaric Ready to Tackle Solar Challenges | Department of Energy

    Energy Saver

    Footage of Sekaric sitting at a table with a group of people. I manage a portfolio of ... Footage of Sekaric sitting around a table with a group of people, in an office, and in a ...

  18. Energy use in state owned facilities

    SciTech Connect

    Not Available

    1988-12-01

    This report contains the energy use data for Wisconsin's 32 largest state-owned government facilities. These facilities account for the majority of both fuels consumed in Wisconsin state buildings and total state-owned gross square footage. Figures for each agency reflect buildings owned but not necessarily occupied by that agency. Information is presented for each of the sixteen years from and including the base year, fiscal 1972--1973 (chosen because it was the last year before the oil embargo). Agencies addressed in this report are the Department of Public Instruction (DPI), the University of Wisconsin System (UWS), the Department of Health and Social Services (DHSS), the Department of Veterans Affairs (DVA), and the Department of Administration (DOA). 16 figs., 40 tabs.

  19. Demand Response Quick Assessment Tool

    Energy Science and Technology Software Center

    2008-12-01

    DRQAT (Demand Response Quick Assessment Tool) is the tool for assessing demand response saving potentials for large commercial buildings. This tool is based on EnergyPlus simulations of prototypical buildings and HVAC equipment. The opportunities for demand reduction and cost savings with building demand responsive controls vary tremendously with building type and location. The assessment tools will predict the energy and demand savings, the economic savings, and the thermal comfor impact for various demand responsive strategies.more » Users of the tools will be asked to enter the basic building information such as types, square footage, building envelope, orientation, utility schedule, etc. The assessment tools will then use the prototypical simulation models to calculate the energy and demand reduction potential under certain demand responsive strategies, such as precooling, zonal temperature set up, and chilled water loop and air loop set points adjustment.« less

  20. Buildings Energy Data Book: 3.3 Commercial Sector Expenditures

    Buildings Energy Data Book

    9 2003 Energy Expenditures per Square Foot of Commercial Floorspace and per Building, by Building Type ($2010) ($2010) Food Service 4.88 27.2 Mercantile 2.23 38.1 Food Sales 4.68 26.0 Education 1.43 36.6 Health Care 2.76 68.0 Service 1.39 9.1 Public Order and Safety 2.07 32.0 Warehouse and Storage 0.80 13.5 Office 2.01 29.8 Religious Worship 0.76 7.8 Public Assembly 1.73 24.6 Vacant 0.34 4.8 Lodging 1.72 61.5 Other 2.99 65.5 Note(s): Source(s): Mall buildings are no longer included in most CBECs

  1. EM Presents Video Highlights of Cleanup Across DOE Complex in YouTube Playlist

    Office of Energy Efficiency and Renewable Energy (EERE)

    WASHINGTON, D.C. — EM continues to add footage of its cleanup across the DOE complex in an expanding YouTube playlist.

  2. Testimonials - Partnerships in R&D - General Electric | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EERE Partnership Testimonials," appear on the screen, followed by "Monte Atwell, General Manager, General Electric" and footage of a man wearing protective glasses in a laboratory. ...

  3. Testimonials - Partnerships in R&D - Whirlpool Corporation |...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "Jeff Fettig, Chairman & CEO, Whirlpool Corporation" and footage of a man. ...

  4. Site Sustainability Plan

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... 10.3 Projected Human Health and Safety ... footage HPSB high-performance and sustainable building HRPP high-risk ... include continued emphasis on behavior change. ...

  5. Testimonials - Partnerships in Battery Technologies - Capstone...

    Energy.gov [DOE] (indexed site)

    Caption: Robert Gleason, Senior Vice President, Product Development, Capstone Turbine ... Then the video flashed through footage from the Capstone Turbine Corporation factory. ...

  6. Backstage at the Daily Show

    Energy.gov [DOE]

    Backstage footage from Secretary Chu's appearance on the Daily Show where he discuses the green room candy dish and possible lighting considerations.

  7. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ARM Education and Outreach is contributing footage from the Barrow kiosk to help build the traditional knowledge perspectives in the various multimedia resources associated with ...

  8. BPA shares new collection of historical films

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Transmission Line" (1950), a richly detailed film about power engineering that uses animation, tower models and field footage to show how Bonneville built the largest...

  9. Supercomputers Crack Sixty-Trillionth Binary Digit of Pi-Squared |

    Energy.gov [DOE] (indexed site)

    Department of Energy 0 GPRA Assumptions, Report to National Renewable Energy Laboratory, March 1999. Summary of Findings (105.96 KB) More Documents & Publications Summary of Findings: Peer Review of the FY2001 GPRA Assumptions Summary of Findings: Peer Review of the FY2003 GPRA Assumptions ITP Steel: Steel Industry Marginal Opportunity Study September 2005 Department of Energy

    1 GPRA Assumptions, Report to National Renewable Energy Laboratory, February 29, 2000. Summary of

  10. Angle-resolved spin wave band diagrams of square antidot lattices...

    Office of Scientific and Technical Information (OSTI)

    (IOM-CNR), Sede di Perugia, co Dipartimento di Fisica e Geologia, Via A. Pascoli, I-06123 Perugia (Italy) Dipartimento di Fisica e Scienze della Terra, Universit di Ferrara, ...

  11. Temperature and magnetic-field driven dynamics in artificial magnetic square ice

    SciTech Connect

    Sophie A. Morley; Stein, Aaron; Rosamond, Mark C.; Venero, Diego Alba; Hrabec, Ales; Shepley, Philippa M.; Im, Mi -Young; Fischer, Peter; Bryan, Matthew T.; Allwood, Dan A.; Steadman, Paul; Langridge, Sean; Marrows, Christopher H.

    2015-08-09

    Artificial spin ices are often spoken of as being realisations of some of the celebrated vertex models of statistical mechanics, where the exact microstate of the system can be imaged using advanced magnetic microscopy methods. The fact that a stable image can be formed means that the system is in fact athermal and not undergoing the usual finite-temperature fluctuations of a statistical mechanical system. In this paper we report on the preparation of artificial spin ices with islands that are thermally fluctuating due to their very small size. The relaxation rate of these islands was determined using variable frequency focused magneto-optic Kerr measurements. We performed magnetic imaging of artificial spin ice under varied temperature and magnetic field using X-ray transmission microscopy which uses X-ray magnetic circular dichroism to generate magnetic contrast. Furthermore, we have developed an on-membrane heater in order to apply temperatures in excess of 700 K and have shown increased dynamics due to higher temperature. Due to the ‘photon-in, photon-out' method employed here, it is the first report where it is possible to image the microstates of an ASI system under the simultaneous application of temperature and magnetic field, enabling the determination of relaxation rates, coercivties, and the analysis of vertex population during reversal.

  12. Femtosecond laser induced tunable surface transformations on (111) Si aided by square grids diffraction

    SciTech Connect

    Han, Weina; Jiang, Lan; Li, Xiaowei Liu, Yang

    2015-12-21

    We report an extra freedom to modulate the femtosecond laser energy distribution to control the surface ablated structures through a copper-grid mask. Due to the reduced deposited pulse energy by changing the scanning speed or the pulse fluence, a sequential evolution of three distinctly different surface patterns with periodic distributions is formed, namely, striped ripple lines, ripple microdots, and surface modification. By changing the scanning speed, the number of the multiple dots in a lattice can be modulated. Moreover, by exploring the ablation process through the copper grid mask, it shows an abnormal enhanced ablation effect with strong dependence of the diffraction-aided fs laser ablated surface structures on polarization direction. The sensitivity shows a quasi-cosinusoid-function with a periodicity of π/2. Particularly, the connection process of striped ripple lines manifests a preferential formation direction with the laser polarization.

  13. The IAEA neutron coincidence counting (INCC) and the DEMING least-squares fitting programs

    SciTech Connect

    Krick, M.S.; Harker, W.C.; Rinard, P.M.; Wenz, T.R.; Lewis, W.; Pham, P.; Ridder, P. de

    1998-12-01

    Two computer programs are described: (1) the INCC (IAEA or International Neutron Coincidence Counting) program and (2) the DEMING curve-fitting program. The INCC program is an IAEA version of the Los Alamos NCC (Neutron Coincidence Counting) code. The DEMING program is an upgrade of earlier Windows{reg_sign} and DOS codes with the same name. The versions described are INCC 3.00 and DEMING 1.11. The INCC and DEMING codes provide inspectors with the software support needed to perform calibration and verification measurements with all of the neutron coincidence counting systems used in IAEA inspections for the nondestructive assay of plutonium and uranium.

  14. Interband magneto-spectroscopy in InSb square and parabolic quantum...

    Office of Scientific and Technical Information (OSTI)

    Authors: Kasturiarachchi, T. ; Edirisooriya, M. ; Mishima, T. D. ; Doezema, R. E. ; Santos, M. B. 1 ; Saha, D. ; Pan, X. ; Sanders, G. D. ; Stanton, C. J. 2 + Show Author ...

  15. Target design optimization for an electron accelerator driven subcritical facility with circular and square beam profiles.

    SciTech Connect

    Gohar, M. Y. A; Sofu, T.; Zhong, Z.; Belch, H.; Naberezhnev, D.; Nuclear Engineering Division

    2008-10-30

    A subcritical facility driven by an electron accelerator is planned at the Kharkov Institute of Physics and Technology (KIPT) in Ukraine for medical isotope production, materials research, training, and education. The conceptual design of the facility is being pursued through collaborations between ANL and KIPT. As part of the design effort, the high-fidelity analyses of various target options are performed with formulations to reflect the realistic configuration and the three dimensional geometry of each design. This report summarizes the results of target design optimization studies for electron beams with two different beam profiles. The target design optimization is performed via the sequential neutronic, thermal-hydraulic, and structural analyses for a comprehensive assessment of each configuration. First, a target CAD model is developed with proper emphasis on manufacturability to provide a basis for separate but consistent models for subsequent neutronic, thermal-hydraulic, and structural analyses. The optimizations are pursued for maximizing the neutron yield, streamlining the flow field to avoid hotspots, and minimizing the thermal stresses to increase the durability. In addition to general geometric modifications, the inlet/outlet channel configurations, target plate partitioning schemes, flow manipulations and rates, electron beam diameter/width options, and cladding material choices are included in the design optimizations. The electron beam interactions with the target assembly and the neutronic response of the subcritical facility are evaluated using the MCNPX code. the results for the electron beam energy deposition, neutron generation, and utilization in the subcritical pile are then used to characterize the axisymmetric heat generation profiles in the target assembly with explicit simulations of the beam tube, the coolant, the clad, and the target materials. Both tungsten and uranium are considered as target materials. Neutron spectra from tungsten and uranium are very similar allowing the use of either material in the subcritical assembly without changing its characteristics. However, the uranium target has a higher neutron yield, which increases the neutron flux of the subcritical assembly. Based on the considered dimensions and heat generation profiles, the commercial CFD software Star-CD is used for the thermal-hydraulic analysis of each target design to satisfy a set of thermal criteria, the most limiting of which being to maintain the water temperature 50 below the boiling point. It is found that the turbulence in the inlet channels dissipates quickly in narrow gaps between the target plates and, as a result, the heat transfer is limited by the laminar flow conditions. On average, 3-D CFD analyses of target assemblies agree well with 1-D calculations using RELAP (performed by KIPT). However, the recirculation and stagnation zones predicted with the CFD models prove the importance of a 3-D analysis to avoid the resulting hotspots. The calculated temperatures are subsequently used for the structural analysis of each target configuration to satisfy the other engineering design requirements. The thermo-structural calculations are performed mostly with NASTRAN and the results occasionally compared with the results from MARC. Both, NASTRAN and MARC are commercially available structural-mechanics analysis software. Although, a significant thermal gradient forms in target elements along the beam direction, the high thermal stresses are generally observed peripherally around the edge of thin target disks/plates. Due to its high thermal conductivity, temperatures and thermal stresses in tungsten target are estimated to be significantly lower than in uranium target. The deformations of the target disks/plates are found to be insignificant, which eliminate concerns for flow blockages in narrow coolant channels. Consistent with the specifications of the KIPT accelerator to be used in this facility, the electron beam power is 100-kW with electron energy in the range of 100 to 200 MeV. As expected, the 100 MeV electrons deposit their energy faster while the 200-MeV electrons spread their energy deposition further along the beam direction. However in that electron energy range, the energy deposition profiles near the beam window require very thin target plates/disks to limit the temperatures and thermal stresses.

  16. Figure 6. PCs and Terminals per Million Square Feet, 1992 and...

    Energy Information Administration (EIA) (indexed site)

    File Last Modified: April 20, 1999 Contact: alan.swenson@eia.doe.gov Alan Swenson URL: consumptioncommercialdataarchivecbecsconsumptionbriefssqft9295.htm For help...

  17. Temperature and magnetic-field driven dynamics in artificial magnetic square ice

    DOE PAGES [OSTI]

    Sophie A. Morley; Stein, Aaron; Rosamond, Mark C.; Venero, Diego Alba; Hrabec, Ales; Shepley, Philippa M.; Im, Mi -Young; Fischer, Peter; Bryan, Matthew T.; Allwood, Dan A.; et al

    2015-08-09

    Artificial spin ices are often spoken of as being realisations of some of the celebrated vertex models of statistical mechanics, where the exact microstate of the system can be imaged using advanced magnetic microscopy methods. The fact that a stable image can be formed means that the system is in fact athermal and not undergoing the usual finite-temperature fluctuations of a statistical mechanical system. In this paper we report on the preparation of artificial spin ices with islands that are thermally fluctuating due to their very small size. The relaxation rate of these islands was determined using variable frequency focusedmore » magneto-optic Kerr measurements. We performed magnetic imaging of artificial spin ice under varied temperature and magnetic field using X-ray transmission microscopy which uses X-ray magnetic circular dichroism to generate magnetic contrast. Furthermore, we have developed an on-membrane heater in order to apply temperatures in excess of 700 K and have shown increased dynamics due to higher temperature. Due to the ‘photon-in, photon-out' method employed here, it is the first report where it is possible to image the microstates of an ASI system under the simultaneous application of temperature and magnetic field, enabling the determination of relaxation rates, coercivties, and the analysis of vertex population during reversal.« less

  18. Federal Finance Facilities Available for Energy Efficiency Upgrades...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Junta, Chief Distributions Branch H. Robert Lash, Chief Transmissions Branch Gerard Moore, Chief Energy Forecasting Branch Victor Vu, Director Power Supply Division Vacant ...

  19. 2011 Annual Workforce Analysis and Staffing Plan Report - Carlsbad

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    31, 2011 Reporting Office CarlsbadFieldOffi1ce This is a template. ...replacement (e.g. relief from hiring freeze). No high priority positions vacant. ...

  20. --No Title--

    Energy Information Administration (EIA) (indexed site)

    PROGRAM TO CREATE FORMAT LIBRARY FOR THE 1989 CBECS DATA PROC FORMAT LIBRARYSASLIB; VALUE ACTIVTY ' ' 'Inapplicable' '01' 'Vacant' '02' 'Office' '03' 'Mercantile...

  1. --No Title--

    Energy Information Administration (EIA) (indexed site)

    *** PROGRAM TO CREATE FORMAT LIBRARY FOR THE 1986 NBECS DATA ***; PROC FORMAT LIBRARYSASLIB; VALUE ACTIVTY ' ' 'Inapplicable' '01' 'Vacant' '02' 'Office' '03' ...

  2. Notices 20 Miles Northwest of Rapid City SD Rapid City SD 57702

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Agriculture Property Number: 15201410029 Status: Excess Comments: 744 sq. ft.; bunkhouse; 5+ months vacant; poor to fair conditions; contact Agriculture for more information. ...

  3. No Slide Title

    Office of Environmental Management (EM)

    plant decommissioning is long-term safe- storage of reactor ... were stored in the vacant fuel channels. * The waste ... Tubes was originally forecast as a 93 day programme ...

  4. 151030_IM1 Org Chart_(v07)_energy.gov

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    VACANT Office of the Chief Information Officer Chief Information Security Officer Paul Cunningham (Acting) IT Program Manager Paul Cunningham Senior Advisor, Cyber Strategy...

  5. Basic Energy Sciences Update

    Energy.gov [DOE] (indexed site)

    Operations Office of Science Vacant Patricia Dehmer (A) Nuclear Physics Tim Hallman Advanced Scientific Computing Research Steve Binkley Nuclear Energy Pete Lyons Fossil Energy...

  6. OCIO Org Chart (as of 4.4.16)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Chief Information Officer (CIO) Michael Johnson Deputy CIO for Architecture, Engineering, ... Cybersecurity Operations Office VACANT, Director IM-33 Enterprise Architecture Office , ...

  7. ORGCHT

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Electrical O'Berski Kingsbury Engineer Peeler Shumbera Vacant Bielamowicz Potter Norris Sassano Accelerator Research Designer II Whiteley Skelton Specialist Group Leaders ...

  8. A Look at Principal Building Activities in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    Sales Lodging Religious Worship Public Assembly Public Order and Safety Warehouse and Storage Vacant Other Summary Comparison Table (All Activities) More information on the:...

  9. MA Org Chart, January 5, 2016

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Director Office of Scheduling and Advance Charles Quintero, Director MA-10 MA-70 Office of ... Information Technology Program Emily Stanton Chris Morris, FOIA Officer Vacant Office of ...

  10. Property:Buildings/ModelBuildingType | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Religious Worship Service Warehouse and Storage Other Vacant Pages using the property "BuildingsModelBuildingType" Showing 12 pages using this property. G General Merchandise...

  11. U

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... in the case of a headquarters employee, or to the departmental equivalent in field or operation offices cases. That office will: (a) search and identify vacant positions ...

  12. No Slide Title

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Associate Administrator for External Affairs Deputy Under Secretary for Counter-terrorism Office of the Under Secretary Vacant Under Secretary Office of the Under Secretary ...

  13. No Slide Title

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Administrator for External Affairs Deputy Under Secretary for Counter-terrorism Office of the Under Secretary Vacant Under Secretary Office of the Under Secretary for Science Dr. ...

  14. No Slide Title

    Energy.gov [DOE] (indexed site)

    Vacant Under Secretary for Management and Performance Office of the Under Secretary for Science & Energy Vacant Under Secretary for Science and Energy Southwestern Power Administration Bonneville Power Administration Western Area Power Administration Southeastern Power Administration U.S. Energy Information Administration Loan Programs Office Advanced Research Projects Agency - Energy General Counsel Assistant Secretary for Congressional & Intergovernmental Affairs Chief Human Capital

  15. OCIO Org Chart (as of 7.28.16)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Chief of Staff Matt Nolan Chief Technology Officer/ Enterprise Architect VACANT Senior Advisor, Cyber Jen Silk Senior Advisor, Strategic Engagement & Communications Kathy Crouch Office of the Chief Information Officer Chief Information Security Officer Paul Cunningham Senior Advisor, Cyber Strategy Implementation VACANT IT Program Manager, Enterprise Operations John Medici Deputy CIO for Resources Management Sarah Gamage Human Capital & Administrative Management Office Sonja Green,

  16. PHOTOMETRIC PROPERTIES OF Ly{alpha} EMITTERS AT z {approx} 4.86 IN THE COSMOS 2 SQUARE DEGREE FIELD

    SciTech Connect

    Shioya, Y.; Taniguchi, Y.; Nagao, T.; Saito, T.; Trump, J.; Sasaki, S. S.; Ideue, Y.; Nakajima, A.; Matsuoka, K.; Murayama, T.; Scoville, N. Z.; Capak, P.; Ellis, R. S.; Sanders, D. B.; Kartaltepe, J.; Mobasher, B.; Aussel, H.; Koekemoer, A.; Carilli, C.; Garilli, B.

    2009-05-01

    We present results of a survey for Ly{alpha} emitters at z {approx} 4.86 based on optical narrowband ({lambda} {sub c} = 7126 A, {delta}{lambda} = 73 A) and broadband (B, V, r', i', and z') observations of the Cosmic Evolution Survey field using Suprime-Cam on the Subaru Telescope. We find 79 Ly{alpha} emitter (LAE) candidates at z {approx} 4.86 over a contiguous survey area of 1.83 deg{sup 2}, down to the Ly{alpha} line flux of 1.47 x 10{sup -17} erg s{sup -1} cm{sup -2}. We obtain the Ly{alpha} luminosity function with a best-fit Schechter parameters of log L* = 42.9{sup +0.5} {sub -0.3} erg s{sup -1} and {phi}* = 1.2{sup +8.0} {sub -1.1} x 10{sup -4} Mpc{sup -3} for {alpha} = -1.5 (fixed). The two-point correlation function for our LAE sample is {xi}(r) = (r/4.4{sup +5.7} {sub -2.9} Mpc){sup -1.90{+-}}{sup 0.22}. In order to investigate the field-to-field variations of the properties of Ly{alpha} emitters, we divide the survey area into nine tiles of 0.{sup 0}5 x 0.{sup 0}5 each. We find that the number density varies with a factor of {approx_equal}2 from field to field with high statistical significance. However, we find no significant field-to-field variance when we divide the field into four tiles with 0.{sup 0}7 x 0.{sup 0}7 each. We conclude that at least 0.5 deg{sup 2} survey area is required to derive averaged properties of LAEs at z {approx} 5, and our survey field is wide enough to overcome the cosmic variance.

  17. Surface harmonics method for two-dimensional time-dependent neutron transport problems of square-lattice nuclear reactors

    SciTech Connect

    Boyarinov, V. F.; Kondrushin, A. E.; Fomichenko, P. A.

    2013-07-01

    Time-dependent equations of the Surface Harmonics Method (SHM) have been derived from the time-dependent neutron transport equation with explicit representation of delayed neutrons for solving the two-dimensional time-dependent problems. These equations have been realized in the SUHAM-TD code. The TWIGL benchmark problem has been used for verification of the SUHAM-TD code. The results of the study showed that computational costs required to achieve necessary accuracy of the solution can be an order of magnitude less than with the use of the conventional finite difference method (FDM). (authors)

  18. Hybrid Solar Lighting Provides Energy Savings and Reduces Waste Heat

    SciTech Connect

    Lapsa, Melissa Voss; Maxey, L Curt; Earl, Dennis Duncan; Beshears, David L; Ward, Christina D; Parks, James Edgar

    2006-01-01

    ABSTRACT Artificial lighting is the largest component of electricity use in commercial U.S. buildings. Hybrid solar lighting (HSL) provides an exciting new means of reducing energy consumption while also delivering significant ancillary benefits associated with natural lighting in buildings. As more than half of all federal facilities are in the Sunbelt region (defined as having an average direct solar radiation of greater than 4 kWh/m2/day) and as more than half of all square footage available in federal buildings is also in the Sunbelt, HSL is an excellent technology fit for federal facilities. The HSL technology uses a rooftop, 4-ft-wide dish and secondary mirror that track the sun throughout the day (Fig. 1). The collector system focuses the sunlight onto 127 optical fibers. The fibers serve as flexible light pipes and are connected to hybrid light fixtures that have special diffusion rods that spread out the light in all directions. One collector powers about eight hybrid light fixtures-which can illuminate about 1,000 square feet. The system tracks at 0.1 accuracy, required by the two-mirror geometry to keep the focused beam on the fiber bundle. When sunlight is plentiful, the optical fibers in the luminaires provide all or most of the light needed in an area. During times of little or no sunlight, a sensor controls the intensity of the artificial lamps to maintain a desired illumination level. Unlike conventional electric lamps, the natural light produces little to no waste heat and is cool to the touch. This is because the system's solar collector removes the infrared light-the part of the spectrum that generates a lot of the heat in conventional bulbs-from the sunlight.

  19. Success Story: Alcoa and ArcelorMittal | Department of Energy

    Office of Environmental Management (EM)

    Below is the text version for the Alcoa and ArcelorMittal video. The words "Clean Energy ... Energy efficiency for ArcelorMittal's extremely important. The video cuts to footage of a ...

  20. Testimonials - Partnerships in R&D - Capstone Turbine Corporation...

    Energy Saver

    Video shows footage of a man working on a generator, and then a man carting a generator on a dolly. Darren Jamison: The U.S. Department of Energy I think has been a great partner ...

  1. Testimonials - Partnerships in Solid-State Lighting - Soraa,...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "Mike Krames, Chief Technology Officer, Soraa, Inc." and footage of a man in a lab. ...

  2. Testimonials - Partnerships in R&D - Air Products and Chemicals...

    Office of Environmental Management (EM)

    Footage of two men walking into a laboratory, followed by the two men looking at data on a ... The ability to bridge that gap when we have something that looks like it could be real big ...

  3. Hilton Worldwide and Whole Foods Market Partner with the U.S...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    A reality-style web series, including behind-the-scenes footage, featuring both teams is ... said Lynn Orr, Under Secretary for Science and Energy at the U.S. Department of ...

  4. Testimonials - Partnerships in LED Lighting - Philips Lumileds...

    Office of Environmental Management (EM)

    Footage of different LED lighting systems, followed by a computer screen with data, followed by a man wearing a blue lab coat and face mask is entering data in a computer in a ...

  5. Ames Laboratory Hot Canyon | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Ames Laboratory Hot Canyon An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. This historical film footage,...

  6. Residential Photovoltaic Solar Panels

    Office of Energy Efficiency and Renewable Energy (EERE)

    This b-roll footage shows exteriors of two Colorado residences that use photovoltaic panels to collect renewable solar energy, thereby reducing their dependence on external electric power. Net...

  7. Ultrafast Transformations in Superionic Nanocrystals

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Upon heating to 103 C (217.4 F), the sulfur cage expands into a largely vacant hexagonal structure, permitting the copper ions to hop from one local sweet spot to another ...

  8. Structure of the Complete 70S Ribosome at 3.7 Resolution

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    in 2005, using ALS data, for two different conformations of vacant Escherichia coli 70S ribosomes at 3.5 resolution. Comparison of the 3.7 resolution structure of...

  9. Final Recovery Act-Funded Demolition Underway at Y-12 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building 9211, one of seven buildings in Y-12's vacant Biology Complex, was constructed in ... Building 9211 is the fourth and final building in the seven-building Biology Complex ...

  10. CX-003234: Categorical Exclusion Determination

    Energy.gov [DOE]

    Demolition of Vacant House at Bonneville Power Administration's Ross ComplexCX(s) Applied: B1.23Date: 07/22/2010Location(s): Clark County, WashingtonOffice(s): Bonneville Power Administration

  11. Microsoft PowerPoint - EERE org chart public 3-28-2016

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EE-61P Steven Capanna , Director International EE-61I Robert Sandoli, Director ... VonVital Director (Acting) Office of Financial Management(OFM) EE-63 (Vacant) Director Budget ...

  12. Hanford Facility Beryllium Fact Sheet Building Number/Name:

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Hanford F Reactor Inspection B-roll footage Hanford F Reactor Inspection B-roll footage Addthis Description A look at the inside of Hanford's F Reactor during a scheduled inspection October 2014

    06KE Rad Con Count Lab Facility September 23, 1999 January 26, 2012 CHPRC Kristy Kimmerle, CIH PAST OPERATIONS Beryllium brought in facility: YES Form of beryllium: SOLID Period of beryllium operations (dates): Start: 1960 End: 1960 Location(s) in facility that contained beryllium materials:

  13. Staff | U.S. DOE Office of Science (SC)

    Office of Science (SC)

    Materials Sciences and Engineering (MSE) Division MSE Home About Staff What's New Research Areas Reports and Activities Science Highlights Principal Investigators' Meetings BES Home About Staff Print Text Size: A A A FeedbackShare Page Name Title Research Area of Responsibility Dr. Linda Horton Division Director Materials Sciences and Engineering Vacant Division Secretary Ms. Teresa Crockett Program Analyst Dr. Arvind Kini Team Lead Materials Discovery, Design, and Synthesis Vacant Program

  14. Career Opportunities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Career Opportunities Career Opportunities Thank you for your interest in employment opportunities with the Department of Energy, Southeastern Power Administration (SEPA) located in Elberton, GA. Currently, SEPA is not advertising any positions. When we are advertising vacant positions, SEPA's vacancy announcements are posted on the USAJOBS website, https://www.usajobs.gov. Those interested in applying for a vacant position must apply via the process detailed in the announcement. It is the policy

  15. Carl Gagliardi Modern Particle

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Career Opportunities Career Opportunities Thank you for your interest in employment opportunities with the Department of Energy, Southeastern Power Administration (SEPA) located in Elberton, GA. Currently, SEPA is not advertising any positions. When we are advertising vacant positions, SEPA's vacancy announcements are posted on the USAJOBS website, https://www.usajobs.gov. Those interested in applying for a vacant position must apply via the process detailed in the announcement. It is the policy

  16. Property:PotentialUrbanUtilityScalePVArea | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    meter,square meters,Square Meter,Square Meters,Sq. Meters,SQUARE METERS Square Kilometers - 0.000001 km,km2,km2,square kilometer,square kilometers,square km,square...

  17. Property:Area | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    meter,square meters,Square Meter,Square Meters,Sq. Meters,SQUARE METERS Square Kilometers - 0.000001 km,km2,km2,square kilometer,square kilometers,square km,square...

  18. Property:PotentialOffshoreWindArea | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    meter,square meters,Square Meter,Square Meters,Sq. Meters,SQUARE METERS Square Kilometers - 0.000001 km,km2,km2,square kilometer,square kilometers,square km,square...

  19. Property:PotentialCSPArea | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    meter,square meters,Square Meter,Square Meters,Sq. Meters,SQUARE METERS Square Kilometers - 0.000001 km,km2,km2,square kilometer,square kilometers,square km,square...

  20. Property:PotentialOnshoreWindArea | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    meter,square meters,Square Meter,Square Meters,Sq. Meters,SQUARE METERS Square Kilometers - 0.000001 km,km2,km2,square kilometer,square kilometers,square km,square...

  1. Property:PotentialRuralUtilityScalePVArea | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    meter,square meters,Square Meter,Square Meters,Sq. Meters,SQUARE METERS Square Kilometers - 0.000001 km,km2,km2,square kilometer,square kilometers,square km,square...

  2. Cleanroom energy benchmarking in high-tech and biotech industries

    SciTech Connect

    Tschudi, William; Benschine, Kathleen; Fok, Stephen; Rumsey, Peter

    2001-04-01

    Cleanrooms, critical to a wide range of industries, universities, and government facilities, are extremely energy intensive. Consequently, energy represents a significant operating cost for these facilities. Improving energy efficiency in cleanrooms will yield dramatic productivity improvement. But more importantly to the industries which rely on cleanrooms, base load reduction will also improve reliability. The number of cleanrooms in the US is growing and the cleanroom environmental systems' energy use is increasing due to increases in total square footage and trends toward more energy intensive, higher cleanliness applications. In California, many industries important to the State's economy utilize cleanrooms. In California these industries utilize over 150 cleanrooms with a total of 4.2 million sq. ft. (McIlvaine). Energy intensive high tech buildings offer an attractive incentive for large base load energy reduction. Opportunities for energy efficiency improvement exist in virtually all operating cleanrooms as well as in new designs. To understand the opportunities and their potential impact, Pacific Gas and Electric Company sponsored a project to benchmark energy use in cleanrooms in the electronics (high-tech) and biotechnology industries. Both of these industries are heavily dependent intensive cleanroom environments for research and manufacturing. In California these two industries account for approximately 3.6 million sq. ft. of cleanroom (McIlvaine, 1996) and 4349 GWh/yr. (Sartor et al. 1999). Little comparative energy information on cleanroom environmental systems was previously available. Benchmarking energy use allows direct comparisons leading to identification of best practices, efficiency innovations, and highlighting previously masked design or operational problems.

  3. A Planning Tool for Estimating Waste Generated by a Radiological Incident and Subsequent Decontamination Efforts - 13569

    SciTech Connect

    Boe, Timothy; Lemieux, Paul; Schultheisz, Daniel; Peake, Tom; Hayes, Colin

    2013-07-01

    Management of debris and waste from a wide-area radiological incident would probably constitute a significant percentage of the total remediation cost and effort. The U.S. Environmental Protection Agency's (EPA's) Waste Estimation Support Tool (WEST) is a unique planning tool for estimating the potential volume and radioactivity levels of waste generated by a radiological incident and subsequent decontamination efforts. The WEST was developed to support planners and decision makers by generating a first-order estimate of the quantity and characteristics of waste resulting from a radiological incident. The tool then allows the user to evaluate the impact of various decontamination/demolition strategies on the waste types and volumes generated. WEST consists of a suite of standalone applications and Esri{sup R} ArcGIS{sup R} scripts for rapidly estimating waste inventories and levels of radioactivity generated from a radiological contamination incident as a function of user-defined decontamination and demolition approaches. WEST accepts Geographic Information System (GIS) shape-files defining contaminated areas and extent of contamination. Building stock information, including square footage, building counts, and building composition estimates are then generated using the Federal Emergency Management Agency's (FEMA's) Hazus{sup R}-MH software. WEST then identifies outdoor surfaces based on the application of pattern recognition to overhead aerial imagery. The results from the GIS calculations are then fed into a Microsoft Excel{sup R} 2007 spreadsheet with a custom graphical user interface where the user can examine the impact of various decontamination/demolition scenarios on the quantity, characteristics, and residual radioactivity of the resulting waste streams. (authors)

  4. Passive Energy Building Design Tool

    Energy Science and Technology Software Center

    1994-11-01

    SOLAR5 is a computer aided design tool to help architects design better, more energy efficient buildings. It is intended for use at the beginning of the design process. To get started, only four pieces of information are necessary to compute the energy needed: the square footage, the number of stories, the kind of building (such as school, home, hotel, or any one of 20 types), and its location (the program stores the temperature ranges formore » fourty major cities). Additional information may be given later to fine tune the design. An expert system using heuristics from a wide range of sources, automatically creates a passive solar baseline building from the four facts specified for that project. By modifying and adapting prior designs the user can create and work upon as many as nine schemes simultaneously. SOLAR5 can analyze the buildings thermal performance for each hour of each month and plot its total heat gain or loss as a three-dimensional surface. After reading the plot, the user can immediately redesign the building and rerun the analysis. Separate heat gain/loss surfaces can be plotted for each of the different parts of the building or schemes that add together to make up the total, including walls, roof, windows, skylights, floor, slab on grade, people, lights, equipment, and infiltration. Two different schemes can be instantly compared by asking for a three-dimensional plot showing only the difference in their performances. The objective of SOLAR5 is to allow the designer to make changes easily and quickly with detailed instantaneous pictorial feedback of the implications of the change.« less

  5. W and Z boson production with jets and inclusive jet production in p pbar collisions at square root s = 1.8TeV

    SciTech Connect

    Goshaw, A.T.

    1996-08-01

    The production properties of jets produced in p{ovr p} collisions at {radical}s = 1.8 TeV have been measured using the CDF detector. The data are compared to predictions of leading order and next to leading order QCD predictions. Both inclusive jets and those produced in association with W and Z bosons are used for this analysis. In general, good agreement with QCD predictions is found except for very high E{sub t} inclusive jets. 10 refs., 7 figs., 2 tabs.

  6. User's manual for ANALYZE: a variable-rate, multiple-well, least-squares matching routine for well-test analysis

    SciTech Connect

    McEdwards, D.G.; Benson, S.M.

    1981-07-01

    ANALYZE is a history-matching program designed for pressure-transient analysis of well tests in single-phase, fluid-saturated reservoirs. Both interference tests and production tests can be analyzed to yield reservoir transmissivity (kh/..mu..), storativity (phi ch), and hydrologic boundaries. An analytic solution is used to calculate the pressure drawdown/buildup in an idealized reservoir system. A schematic of the basic reservoir/well model assumed by the computational algorithm is shown. The reservoir is assumed to be an isothermal, isotropic, homogeneous, porous medium of constant thickness and infinite areal extent. The production well is modeled as a line source which fully penetrates the reservoir. The flow into the well is radial and uniformly distributed over the height of the well (gravity effects neglected).

  7. Highly Selective Colorimetric and Luminescence Response of a Square-Planar Platinum(II) Terpyridyl Complex to Aqueous TcO4-

    SciTech Connect

    Chatterjee, Sayandev; Norton, Amie E.; Edwards, Matthew K.; Peterson, James M.; Taylor, Stephen D.; Bryan, Samuel A.; Andersen, Amity; Govind, Niranjan; Albrecht-Schmitt, Thomas E.; Connick, William; Levitskaia, Tatiana G.

    2015-10-08

    In an effort to address the need for a rapid, selective and economical detection technique for aqueous pertechnetate (TcO4-) anion based on recognition at the molecular level, simple salts of transition metal complexes that undergo a distinct spectroscopic change upon exposure to aqueous anions were explored. The Pt(II) complex [Pt(tpy)Br]SbF6 (tpy=2,2';6',2"-terpyridine) undergoes a dramatic color change and intense luminescence response upon TcO4- uptake due to concomitant enhancement of Pt•••Pt interactions. The spectroscopic response was highly selective and quantitative for aqueous TcO4- among other competing anions. Complimentary Raman spectroscopy and microscopy techniques, structural determination and theoretical methods were employed to achieve molecular-level understanding of the mechanism of the response to aqueous TcO4-.

  8. SINGLE SPIN ASYMMETRIES OF IDENTIFIED HADRONS IN p +p AT SQUARE ROOT S = 62.4 AND 200 GeV.

    SciTech Connect

    LEE,J.H.; VIDEBAEK, F.

    2007-04-16

    Measurements of x{sub F}-dependent single spin asymmetries of identified charged hadrons, {pi}{sup {+-}}, K{sup {+-}}, p, and {bar p}, from transversely polarized proton collisions at {radical}s = 200 and 62.4 GeV at RHIC are presented. The energy and flavor dependent asymmetry measurements bring new insight into the fundamental mechanisms of transverse spin asymmetries and Quantum Chromodynamical description of hadronic structure.

  9. Table 4.9 Uranium Exploration and Development Drilling, 1949-2011

    Energy Information Administration (EIA) (indexed site)

    9 Uranium Exploration and Development Drilling, 1949-2011 Year Exploration 1 Development 2 Total Holes Drilled Footage Drilled Holes Drilled Footage Drilled Holes Drilled Footage Drilled Number Thousand Feet Number Thousand Feet Number Thousand Feet 1949 NA 360 NA 53 NA 413 1950 NA 570 NA 208 NA 778 1951 NA 1,080 NA 348 NA 1,428 1952 NA 1,362 NA 300 NA 1,662 1953 NA 3,648 NA 367 NA 4,015 1954 NA 4,057 NA 553 NA 4,610 1955 NA 5,267 NA 762 NA 6,029 1956 NA 7,287 NA 1,503 NA 8,790 1957 NA 7,352 NA

  10. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    5 Table 4.9 Uranium Exploration and Development Drilling, Selected Years, 1949-2011 Year Exploration 1 Development 2 Total Holes Drilled Footage Drilled Holes Drilled Footage Drilled Holes Drilled Footage Drilled Thousands Million Feet Thousands Million Feet Thousands Million Feet 1949 NA 0.36 NA 0.05 NA 0.41 1950 NA .57 NA .21 NA .78 1955 NA 5.27 NA .76 NA 6.03 1960 7.34 1.40 24.40 4.21 31.73 5.61 1965 6.23 1.16 7.33 .95 13.56 2.11 1970 43.98 17.98 14.87 5.55 58.85 23.53 1975 34.29 15.69 21.60

  11. Near-edge X-ray Absorption Fine Structure Study of Disordering in Gd₂(Ti1-yZry)₂O₇ Pyrochlores

    SciTech Connect

    Nachimuthu, Ponnusamy; Thevuthasan, Suntharampillai; Adams, Evan M.; Weber, William J.; Begg, Bruce D.; Mun, B S.; Shuh, David K.; Lindle, Dennis W.; Gullikson, Eric M.; Perera, Rupert C.

    2005-02-03

    Disorder in Gd₂(Ti1-yZry)₂O₇ pyrochlores, for y=0.0-1.0, is investigated by Ti 2p and O 1s near-edge x-ray absorption fine structure spectroscopy. Ti⁴⁺ ions are found to occupy octahedral sites in Gd₂Ti₂O₇ with a tetragonal distortion induced by vacant oxygen sites. As Zr substitutes for Ti, the tetragonal distortion decreases, and Zr coordination increases from 6 to 8. The migration of oxygen ions from 48f or 8b sites to vacant 8a sites compensate for the increased Zr coordination, thereby reducing the number of vacant 8a sites, which further reduces the tetragonal distortion and introduces more disorder around Ti. This is evidence for simultaneous cation disorder with anion migration.

  12. Crystal structure and high-temperature properties of the Ruddlesden–Popper phases Sr{sub 3−x}Y{sub x}(Fe{sub 1.25}Ni{sub 0.75})O{sub 7−δ} (0≤x≤0.75)

    SciTech Connect

    Samain, Louise; Amshoff, Philipp; Biendicho, Jordi J.; Tietz, Frank; Mahmoud, Abdelfattah; Hermann, Raphaël P.; Istomin, Sergey Ya.; Grins, Jekabs; Svensson, Gunnar

    2015-07-15

    Ruddlesden–Popper n=2 member phases Sr{sub 3−x}Y{sub x}Fe{sub 1.25}Ni{sub 0.75}O{sub 7−δ}, 0≤x≤0.75, have been investigated by X-ray and neutron powder diffraction, thermogravimetry and Mössbauer spectroscopy. Both samples as-prepared at 1300 °C under N{sub 2}(g) flow and samples subsequently air-annealed at 900 °C were studied. The as-prepared x=0.75 phase is highly oxygen deficient with δ=1, the O1 atom site being vacant, and the Fe{sup 3+}/Ni{sup 2+} ions having a square pyramidal coordination. For as-prepared phases with lower x values, the Mössbauer spectral data are in good agreement with the presence of both 5- and 4-coordinated Fe{sup 3+} ions, implying in addition a partial occupancy of the O3 atom sites that form the basal plane of the square pyramid. The air-annealed x=0.75 sample has a δ value of 0.61(1) and the structure has Fe/Ni ions in both square pyramids and octahedra. Mössbauer spectroscopy shows the phase to contain only Fe{sup 3+}, implying that all Ni is present as Ni{sup 3+}. Air-annealed phases with lower x values are found to contain both Fe{sup 3+} and Fe{sup 4+}. For both the as-prepared and the air-annealed samples, the Y{sup 3+} cations are found to be mainly located in the perovskite block. The high-temperature thermal expansion of as-prepared and air-annealed x=0.75 phases were investigated by high-temperature X-ray diffraction and dilatometry and the linear thermal expansion coefficient determined to be 14.4 ppm K{sup −1}. Electrical conductivity measurements showed that the air-annealed samples have higher conductivity than the as-prepared ones. - Highlights: • Ruddlesden–Popper, n=2, Sr{sub 3−x}Y{sub x}Fe{sub 1.25}Ni{sub 0.75}O{sub 7−δ}, 0≤x≤0.75, have been synthesised. • The crystal structures of the phases have been determined. • Sr{sub 2.25}Y{sub 0.75}Fe{sub 1.25}Ni{sub 0.75}O{sub 6}, made in N{sub 2}(g) has Fe{sup 3+}/Ni{sup 2+} in square pyramides. • Sr{sub 2.25}Y{sub 0.75}Fe{sub 1.25}Ni

  13. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    9 Uranium Exploration and Development Drilling Total Holes Drilled, 1958-2011¹ Holes Drilled, Selected Years Total Footage Drilled, 1949-2011¹ Footage Drilled, Selected Years 104 U.S. Energy Information Administration / Annual Energy Review 2011 1 In 2002 and 2003, data are withheld to avoid disclosure. Source: Table 4.9. 19 10 9 2 1 5 8 28 18 2 0 5 1961 1971 1981 1991 2001 2011 0 10 20 30 Thousands Exploration Development 1950 1960 1970 1980 1990 2000 2010 0 20 40 60 80 100 120 Thousands 3 4

  14. Microsoft Word - Document1

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    plans to lay off 24 LSU System proposed job reductions Furloughs set, vacant jobs cut * By JORDAN BLUM * Advocate Capitol News Bureau * Published: Jul 16, 2009 - Page: 1A The flagship LSU campus is only planning to lay off 24 employees because of state budget cuts to colleges. Another 176 vacant positions are also being axed, according to revised budget plans released Wednesday. The campus has almost 3,300 employees. But nearly half could face furloughs - mandatory time off without pay. The LSU

  15. The Search for Heavy Elements

    ScienceCinema

    None

    2016-07-12

    The 1994 documentary "The Search for Heavy Elements" chronicles the expansion of the periodic table through the creation at Berkeley Lab of elements heavier than uranium. The documentary features a mix of rarely-seen archival footage, historical photos, and interviews with scientists who made history, such as Glenn Seaborg and Albert Ghiorso.

  16. Energy 101: Wind Turbines - 2014 Update

    SciTech Connect

    2014-05-06

    See how wind turbines generate clean electricity from the power of wind. The video highlights the basic principles at work in wind turbines, and illustrates how the various components work to capture and convert wind energy to electricity. This updated version also includes information on the Energy Department's efforts to advance offshore wind power. Offshore wind energy footage courtesy of Vestas.

  17. Energy 101: Wind Turbines - 2014 Update

    ScienceCinema

    None

    2016-07-12

    See how wind turbines generate clean electricity from the power of wind. The video highlights the basic principles at work in wind turbines, and illustrates how the various components work to capture and convert wind energy to electricity. This updated version also includes information on the Energy Department's efforts to advance offshore wind power. Offshore wind energy footage courtesy of Vestas.

  18. Demolishing Decay at the Hanford Site

    Energy.gov [DOE]

    Check out this epic demolition video from the Hanford Site in Washington state. But its more than just great footage -- this represents important progress in the cleanup of the environmental legacy of one of America's most famous scientific undertakings -- the Manhattan Project.

  19. The Search for Heavy Elements

    SciTech Connect

    2008-04-17

    The 1994 documentary "The Search for Heavy Elements" chronicles the expansion of the periodic table through the creation at Berkeley Lab of elements heavier than uranium. The documentary features a mix of rarely-seen archival footage, historical photos, and interviews with scientists who made history, such as Glenn Seaborg and Albert Ghiorso.

  20. Hot Canyon

    ScienceCinema

    None

    2013-03-01

    This historical film footage, originally produced in the early 1950s as part of a series by WOI-TV, shows atomic research at Ames Laboratory. The work was conducted in a special area of the Laboratory known as the "Hot Canyon."

  1. ORNL Lightweighting Research Featured on MotorWeek

    ScienceCinema

    None

    2014-06-03

    PBS MotorWeek, television's longest running automotive series, featured ORNL lightweighting research for vehicle applications in an episode that aired in early April 2014. The crew captured footage of research including development of new metal alloys, additive manufacturing, carbon fiber production, advanced batteries, power electronics components, and neutron imaging applications for materials evaluation.

  2. Solar Impulse's Solar-Powered Plane

    ScienceCinema

    Moniz, Ernest; Piccard, Bertrand; Reicher, Dan

    2016-07-12

    Solar Impulse lands in Washington, DC at Washington Dulles International Airport as part of its journey across the United States. Secretary Ernest Moniz speaks about how advancements like those at the Department of Energy are leading the way for innovations like the solar-powered plane. Footage of the solar-powered plane courtesy of Solar Impulse.

  3. Solar Impulse's Solar-Powered Plane

    SciTech Connect

    Moniz, Ernest; Piccard, Bertrand; Reicher, Dan

    2013-07-08

    Solar Impulse lands in Washington, DC at Washington Dulles International Airport as part of its journey across the United States. Secretary Ernest Moniz speaks about how advancements like those at the Department of Energy are leading the way for innovations like the solar-powered plane. Footage of the solar-powered plane courtesy of Solar Impulse.

  4. ORNL Lightweighting Research Featured on MotorWeek

    SciTech Connect

    2014-04-15

    PBS MotorWeek, television's longest running automotive series, featured ORNL lightweighting research for vehicle applications in an episode that aired in early April 2014. The crew captured footage of research including development of new metal alloys, additive manufacturing, carbon fiber production, advanced batteries, power electronics components, and neutron imaging applications for materials evaluation.

  5. Project Reports for Kaw Nation- 2002 Project

    Office of Energy Efficiency and Renewable Energy (EERE)

    The study will assess the feasibility of a commercial wind facility on lands selected and owned by the Kaw Nation adjacent to the vacant Chilocco Indian School campus. The Kaw Nation will examine the potential for integration of the wind facility into a redevelopment plan for the property.

  6. Promising Technology: Demand Control Ventilation

    Energy.gov [DOE]

    Demand control ventilation (DCV) measures carbon dioxide concentrations in return air or other strategies to measure occupancy, and accurately matches the ventilation requirement. This system reduces ventilation when spaces are vacant or at lower than peak occupancy. When ventilation is reduced, energy savings are accrued because it is not necessary to heat, cool, or dehumidify as much outside air.

  7. EA-1862: Oneida Seven Generation Corporation Waste-To-Energy System, Ashwaubenon, Wisconsin

    Energy.gov [DOE]

    Oneidas Energy Recovery Project would construct and operate a solid waste-to-electricity power plant on vacant property within the Bayport Industrial Center in the City of Green Bay, Brown County, Wisconsin. This energy recovery process would involve bringing municipal solid waste into the plant for sizing (shredding), sorting (removing recyclable material), and conveying into one of three pyrolytic gasification systems.

  8. CX-100141 Categorical Exclusion Determination

    Energy.gov [DOE]

    Facilitating Deployment of Community Solar PV Systems on Rooftops and Vacant Land in Northeast Illinois Award Number: DE-EE006916 CX(s) Applied: A9, A11 Date: 12/12/2014 Location(s): IL Office(s): Golden Field Office

  9. Kaw Nation- 2002 Project

    Energy.gov [DOE]

    The study will assess the feasibility of a commercial wind facility on lands selected and owned by the Kaw Nation adjacent to the vacant Chilocco Indian School campus. The Kaw Nation will examine the potential for integration of the wind facility into a redevelopment plan for the property.

  10. Energy Department’s Interior Lighting Campaign nets $13.5 million in energy savings in first year; Green Lease Leaders add 1 billion square feet of commercial building space

    Energy.gov [DOE]

    The Energy Department today announced the results of this year’s Better Buildings Alliance technology and market campaigns. Through partnerships with public and private sector organizations, the U.S. Department of Energy (DOE) is working with interested landlords, tenants, and owners to adopt solutions that best meet the needs of their buildings for sustainable leasing and upgrades to indoor lighting.

  11. Untitled Document

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    4" diameter 5" square 6" diameter good versatility on substrate thickness and geometry Mask geometries 5" square 7" square 9" square 1:1 copies of 5" square substrate and...

  12. Table 4.6 Crude Oil and Natural Gas Exploratory Wells, 1949-2010

    Energy Information Administration (EIA) (indexed site)

    6 Crude Oil and Natural Gas Exploratory Wells, 1949-2010 Year Wells Drilled Successful Wells Footage Drilled 1 Average Footage Drilled Crude Oil 2 Natural Gas 3 Dry Holes 4 Total Crude Oil 2 Natural Gas 3 Dry Holes 4 Total Crude Oil 2 Natural Gas 3 Dry Holes 4 Total Number Percent Thousand Feet Feet per Well 1949 1,406 424 7,228 9,058 20.2 5,950 2,409 26,439 34,798 4,232 5,682 3,658 3,842 1950 1,583 431 8,292 10,306 19.5 6,862 2,356 30,957 40,175 4,335 5,466 3,733 3,898 1951 1,763 454 9,539

  13. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    7 Table 4.5 Crude Oil and Natural Gas Exploratory and Development Wells, Selected Years, 1949-2010 Year Wells Drilled Successful Wells Footage Drilled 1 Average Footage Drilled Crude Oil 2 Natural Gas 3 Dry Holes 4 Total Crude Oil 2 Natural Gas 3 Dry Holes 4 Total Crude Oil 2 Natural Gas 3 Dry Holes 4 Total Number Percent Thousand Feet Feet per Well 1949 21,352 3,363 12,597 37,312 66.2 79,428 12,437 43,754 135,619 3,720 3,698 3,473 3,635 1950 23,812 3,439 14,799 42,050 64.8 92,695 13,685 50,977

  14. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    9 Table 4.6 Crude Oil and Natural Gas Exploratory Wells, Selected Years, 1949-2010 Year Wells Drilled Successful Wells Footage Drilled 1 Average Footage Drilled Crude Oil 2 Natural Gas 3 Dry Holes 4 Total Crude Oil 2 Natural Gas 3 Dry Holes 4 Total Crude Oil 2 Natural Gas 3 Dry Holes 4 Total Number Percent Thousand Feet Feet per Well 1949 1,406 424 7,228 9,058 20.2 5,950 2,409 26,439 34,798 4,232 5,682 3,658 3,842 1950 1,583 431 8,292 10,306 19.5 6,862 2,356 30,957 40,175 4,335 5,466 3,733 3,898

  15. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    1 Table 4.7 Crude Oil and Natural Gas Development Wells, Selected Years, 1949-2010 Year Wells Drilled Successful Wells Footage Drilled 1 Average Footage Drilled Crude Oil 2 Natural Gas 3 Dry Holes 4 Total Crude Oil 2 Natural Gas 3 Dry Holes 4 Total Crude Oil 2 Natural Gas 3 Dry Holes 4 Total Number Percent Thousand Feet Feet per Well 1949 19,946 2,939 5,369 28,254 81.0 73,478 10,028 17,315 100,821 3,684 3,412 3,225 3,568 1950 22,229 3,008 6,507 31,744 79.5 85,833 11,329 20,020 117,183 3,861

  16. Label-free functional nucleic acid sensors for detecting target agents

    DOEpatents

    Lu, Yi; Xiang, Yu

    2015-01-13

    A general methodology to design label-free fluorescent functional nucleic acid sensors using a vacant site approach and an abasic site approach is described. In one example, a method for designing label-free fluorescent functional nucleic acid sensors (e.g., those that include a DNAzyme, aptamer or aptazyme) that have a tunable dynamic range through the introduction of an abasic site (e.g., dSpacer) or a vacant site into the functional nucleic acids. Also provided is a general method for designing label-free fluorescent aptamer sensors based on the regulation of malachite green (MG) fluorescence. A general method for designing label-free fluorescent catalytic and molecular beacons (CAMBs) is also provided. The methods demonstrated here can be used to design many other label-free fluorescent sensors to detect a wide range of analytes. Sensors and methods of using the disclosed sensors are also provided.

  17. Secretary Moniz's Media Briefing on Energy Department FY2015 Budget

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Request -- As Delivered | Department of Energy Media Briefing on Energy Department FY2015 Budget Request -- As Delivered Secretary Moniz's Media Briefing on Energy Department FY2015 Budget Request -- As Delivered March 4, 2014 - 3:25pm Addthis Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy MEDIA View the Secretary's powerpoint presentation. Watch video footage of the media briefing. Welcome, everyone. I will say right of the bat I am at a bit of a disadvantage in not actually being

  18. Office of Environmental Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Office of Environmental Management Office of Environmental Management Energy By The Numbers: Recovery Act EM's Paducah Site Completes Building Removals Savannah River Site Museum Ribbon Cutting F Reactor Inspection SRNL Laboratory Directed Research and Development Poster Session 351 Substation Demolition -- B Roll Hanford F Reactor Inspection B-roll footage Energy Secretary Talks About SRNL Hanford workers begin cleaning out historic McCluskey Room Traffic Safety Demo of below ground site that

  19. Eagles are Making Wind Turbines Safer for Birds | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Eagles are Making Wind Turbines Safer for Birds Eagles are Making Wind Turbines Safer for Birds March 16, 2016 - 10:38am Addthis Video by Simon Edelman, Energy Department. | Footage courtesy of the National Renewable Energy Laboratory and RES Americas. Kelly Yaker National Renewable Energy Laboratory How does it work? Researchers at NREL teamed with industry to study the flight patterns of two eagles. The data will help the companies develop systems to detect birds and prevent collisions with

  20. South Pacific: Another slow year is ahead. [Oil and gas industry outlook in the South Pacific

    SciTech Connect

    Langley, B. )

    1993-08-01

    This paper summarizes the oil and gas exploration activities in Australia, Papua New Guinea, and New Zealand in the 1992--1993 period and projects the near-future market and development of these resources. It provides statistics on numbers of new wells drilled, footage involved, number or completions, and production information. The paper also describes the main geographical areas of exploration, types of exploration equipment involved.

  1. Solar Impulse Lands in New York | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Impulse Lands in New York Solar Impulse Lands in New York July 8, 2013 - 9:42am Addthis Solar Impulse lands in Washington, DC, at Washington Dulles International Airport as part of its journey across America. | Video by Matty Greene, Energy Department; footage of the solar-powered plane courtesy of Solar Impulse. Erin R. Pierce Erin R. Pierce Former Digital Communications Specialist, Office of Public Affairs This past weekend, Solar Impulse -- a solar-powered plane that flies day and night

  2. Testimonials - Partnerships in Combined Heat and Power Technologies -

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Cummins Inc. | Department of Energy Combined Heat and Power Technologies - Cummins Inc. Testimonials - Partnerships in Combined Heat and Power Technologies - Cummins Inc. Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "Kevin Keene, Project Director, Cummins" and footage of a man. Kevin Keene: Working with the Department of Energy has been

  3. Testimonials - Partnerships in Fuel Cells - GE Global Research |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Fuel Cells - GE Global Research Testimonials - Partnerships in Fuel Cells - GE Global Research Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "Mark Little, Senior Vice President, GE Global Research" and footage of a man in a suit. Mark Little: Energy, manufacturing, innovation, and competitiveness are the core to the

  4. Testimonials - Partnerships in LED Lighting - Philips Lumileds

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lighting, LLC | Department of Energy LED Lighting - Philips Lumileds Lighting, LLC Testimonials - Partnerships in LED Lighting - Philips Lumileds Lighting, LLC Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "Sunil Thomas, General Manager of San Jose Manufacturing Site, Philips Lumileds Lighting, LLC" and footage of a man sitting in a showcase

  5. Testimonials - Partnerships in R&D - Air Products and Chemicals

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Incorporated | Department of Energy R&D - Air Products and Chemicals Incorporated Testimonials - Partnerships in R&D - Air Products and Chemicals Incorporated Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "John Cirucci, Senior Engineering Associate, Air Products and Chemicals Incorporated" and footage of a man. John Cirucci: Air

  6. Testimonials - Partnerships in Solar Technologies - SRI International |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Solar Technologies - SRI International Testimonials - Partnerships in Solar Technologies - SRI International Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "Curtis Carlson, Vice Chairman for Innovation, SRI International" and footage of a man. Curtis Carlson: Innovation is everything today. We're in the, I call it, the

  7. Testimonials - Partnerships in Sustainable Transportation - The Ohio

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    State University | Department of Energy Sustainable Transportation - The Ohio State University Testimonials - Partnerships in Sustainable Transportation - The Ohio State University Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials" appears on the screen, followed by footage of Professor Giorgio Rizzoni speaking. The words "Giorgio Rizzoni, Director, Center for Automotive Research, The

  8. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update

    Footage Drilled for Crude Oil and Natural Gas Wells Definitions Key Terms Definition Crude Oil A mixture of hydrocarbons that exists in liquid phase in natural underground reservoirs and remains liquid at atmospheric pressure after passing through surface separating facilities. Depending upon the characteristics of the crude stream, it may also include: Small amounts of hydrocarbons that exist in gaseous phase in natural underground reservoirs but are liquid at atmospheric pressure after being

  9. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update

    Footage Drilled for Crude Oil and Natural Gas Wells Definitions Key Terms Definition Crude Oil A mixture of hydrocarbons that exists in liquid phase in natural underground reservoirs and remains liquid at atmospheric pressure after passing through surface separating facilities. Depending upon the characteristics of the crude stream, it may also include: Small amounts of hydrocarbons that exist in gaseous phase in natural underground reservoirs but are liquid at atmospheric pressure after being

  10. INL featured in video presented at Copenhagen conference

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    INL featured in video presented at Copenhagen conference IDAHO FALLS - Idaho National Laboratory footage and research are featured in a video presented at the World Climate Change Summit in Copenhagen today. President Obama introduced the video, which is titled "America's Response to Climate Change" and discusses how varied energy technologies can combat climate change. In October, the Department of Energy's Public Affairs office asked the national laboratories to suggest ideas about

  11. Hanford Natural Resource Trustees - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Members About Us Hanford Natural Resource Trustee Council HNRTC Members HNRTC History & Accomplishments Hanford Natural Resource Trustees Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size US Department of Energy - www.hanford.gov Primary Representative: Tom Post - (509) 376-3232 Fish and Wildlife Service - www.fws.gov Primary Representative: Tammy Ash - 509.893.8033 Alternate Representative: vacant Nez Perce Tribe - http://www.nezperce.org/~erwm/ Primary

  12. Work Begins On First Recovery Act Funded Demolition Project at ORNL |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Work Begins On First Recovery Act Funded Demolition Project at ORNL Work Begins On First Recovery Act Funded Demolition Project at ORNL July 20, 2009 - 12:00pm Addthis OAK RIDGE, Tenn. - The Department of Energy's (DOE) Oak Ridge National Laboratory (ORNL) has begun cleanup and demolition of the former Radioisotope Development Laboratory, a long-vacant facility on the Laboratory's central campus. Contractors expect to employ approximately 30 workers for the project,

  13. Hydrogen Fueling Station in Honolulu, Hawaii Feasibility Analysis |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Station in Honolulu, Hawaii Feasibility Analysis Hydrogen Fueling Station in Honolulu, Hawaii Feasibility Analysis This feasibility report assesses the technical and economic feasibility of developing a vacant, undeveloped General Services Administration-owned property into an income-producing site equipped with a hydrogen fueling station and a covered 175-stall parking structure with roof-top solar panels. According to the analysis, the proposed station will enable the

  14. ORGCHT

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    DIRECTOR Natowitz Health Physics Rodriguez SEE Line Senior ME Operations Chief Senior Acc. Phys. Computer Syst. Administration Proj. Manager Derrig Abegglen May Hagel Harris Clark Burch Ramirez Wellmann Batson Horvat Mechanical Mechanical Electrical Shop Building Acc. Phys Valerian Hyman Engineer Engineer Cotsonis Maintenance Kim Deason Utley Olsen Chapman Cowden Mynar Clark Haisler Gallegos Electrical O'Berski Kingsbury Engineer Peeler Shumbera Vacant Bielamowicz Potter Norris Sassano

  15. KEY PERSONNEL

    National Nuclear Security Administration (NNSA)

    by Mods 002, 006, 020, 029, 0049, 0065, 0084, 0091, 0106) DE-NA0000622 Section J, Appendix J, Page 1 SECTION J APPENDIX J KEY PERSONNEL 7/06/2015 TITLE NAME President Christopher C. Gentile Vice President, Engineering Robin Stubenhofer Vice President, Integrated Supply Chain Rick Lavelock Director, Sr. Program Management Org. Vacant Director, Integrated Supply Chain Kurt Lorenzen Director, Engineering Bob Chaney Director, Quality David Schoenherr Director, Information Technology Matt Decker

  16. Buffalo Pushes Energy-Efficient Affordable Housing in New York | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Buffalo Pushes Energy-Efficient Affordable Housing in New York Buffalo Pushes Energy-Efficient Affordable Housing in New York Better Buildings Residential Network member PUSH (People United for Sustainable Housing) Buffalo broke ground in March 2014 on its Massachusetts Avenue Sustainable Homes (MASH) project. The initiative will create energy-efficient, affordable housing by renovating two vacant historic buildings and building one new multifamily structure. Part of the project's

  17. EERE Job Vacancies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Job Vacancies EERE Job Vacancies Photo of James Forrestal Building in downtown Washington, D.C., headquarters of the U.S. Department of Energy. Do you want to build your career while changing America? EERE, the U.S. Department of Energy office leading the nation's effort to enhance energy efficiency and develop renewable energy technologies, is searching for enthusiastic, driven and committed professionals to fill the following vacant positions. To apply for a job, follow the instructions

  18. Sac and Fox Tribe of the Mississippi in Iowa

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Iowa Meskwaki Nation Department of Energy Tribal Energy Program Review 2011 Denver, Colorado Wind Energy Resource Assessment on Tribal Land Presented by: Donald Wanatee November 15, 2011 Project Participants: Technical POC: Vacant Business POC: Lucas Smith (Grants/Contracts Officer) Tribal Council Liaison: Donald Wanatee Project location Assess Energy Needs Summary of Project Objectives * Anemometer tower deployed in September 2010. Average wind speed at 58.5 meters= 14.56 mph. 12 months worth

  19. PROJECT PROFILE: Cook County Department of Environmental Control (Solar

    Energy Saver

    Market Pathways) | Department of Energy Cook County Department of Environmental Control (Solar Market Pathways) PROJECT PROFILE: Cook County Department of Environmental Control (Solar Market Pathways) Title: Facilitating Deployment of Community Solar PV Systems on Rooftops and Vacant Land in Northeast IL Cook County Seal.png Funding Opportunity: Solar Market Pathways SunShot Subprogram: Soft Costs Location: Chicago, IL Amount Awarded: $1,238,308 Awardee Cost Share: $424,898 Cook County

  20. Better Buildings Network View, April 2014

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    April 2014 News From the Field Residential Network Member Pushes Energy- Efficient Affordable Housing in Buffalo, New York Better Buildings Residential Network member PUSH (People United for Sustainable Housing) Buffalo broke ground in March 2014 on its Massachusetts Avenue Sustainable Homes (MASH) project. The initiative will create energy- efficient, affordable housing by renovating two vacant historic buildings and building one new multifamily structure. Part of the project's Community

  1. C3DIV.xls

    Energy Information Administration (EIA) (indexed site)

    million square feet) Floorspace per Building (thousand square feet) Total (trillion Btu) per Building (million Btu) per Square Foot (thousand Btu) per Worker (million Btu) NEW...

  2. Consumption

    Energy Information Administration (EIA) (indexed site)

    (million square feet)",,,"Energy Intensity for Sum of Major Fuels (thousand Btu square foot)" ,"1,001 to 10,000 Square Feet","10,001 to 100,000 Square Feet","Over 100,000...

  3. REPORT ON THE ELIMINATION OF EXCESS FACILITIES

    Office of Environmental Management (EM)

    FY 2013 Report on DOE's Disposition of Excess Real Property Status of Banked Square Feet for Future One-for-One Offsets Office of Acquisition and Project Management March 2014 2 FY 2002 to FY 2012 Dispositions (square feet) FY 2013 Dispositions (square feet) FY 2013 Gross Banked Dispositions (square feet) FY 2002 to FY 2012 Additions Subject to Offset (square feet) FY 2013 Additions subject to Offset (square feet) Total Additions Subject to Offset (square feet) FY 2013 Net Banked Area (square

  4. Energy Information Administration - Commercial Energy Consumption...

    Gasoline and Diesel Fuel Update

    square feet) Total (million dollars) per Building (thousand dollars) per Square Foot (dollars) per Million Btu (dollars) All Buildings ......

  5. Using multivariate analyses to compare subsets of electrodes...

    Office of Scientific and Technical Information (OSTI)

    reduced to 15. Partial least squares regression models relating electrochemical ... Additionally, for each sugar, interval partial least squares regression successfully ...

  6. Oil and gas developments in West Coast area in 1981

    SciTech Connect

    Dignes, T.W.; Woltz, D.

    1982-11-01

    The total exploratory footage and number of wells drilled in the onshore area of California during 1981 increased approximately 10% and20%, respectively, over the 1980 figures. Both the average footage drilled per well (5579 ft) and the percentage of success (32.7%) showed declines from 1980. Eight wildcats established new fields in 1981. Two of the wildcats discovered new oil fields and 6 found new gas fields. An additional gas find has been treated as a discovery because of its stratigraphic significance. Onshore development drilling included 2078 wells; 97% of these were completed as successful producers, the same percentage as in 1980. For the California offshore, just 5 exploratory well completions were reported to the Committee on Statistics of Drilling in 1981; only 2 were successful. Texaco announced its Pitas Point gas field extension in May, and Chevron announced a new oil field discovery, the Point Arguello, in October. There were 118 development wells drilled, of which 99 (83.9%) were successful. Development footage and number of wells were up, but the percentage of success declined from 90% in 1980. California's oil production reached an all-time high of 384.8 million bbl in 1981. The state's previous record, set in 1968, was 375.4 million bbl. Geothermal activity in California centered on development of the proven Imperial Valley and Geysers areas and the discovery of the Coso area in Inyo County. Activity in Oregon included evaluation of the Mount Hood and Newberry Volcano areas. Oil and gas exploratory drilling in Oregon druing 1981 led to the discovery of a new gas field by American Quasar in Linn County and to the establishment of a new gas pool by Reichhold Energy at the Mist field in Columbia County. The major portion of Washington's exploratory drilling in 1981 was carried out by Shell in Kittitas County in the south-central part of the state. At last report, the hydrocarbon accumulations found had been deemed noncommercial.

  7. Legendary Tuskegee Airmen to Speak at Jefferson Lab's Black History Month

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Event | Jefferson Lab Legendary Tuskegee Airmen to Speak at Jefferson Lab's Black History Month Event Legendary Tuskegee Airmen to Speak at Jefferson Lab's Black History Month Event February 3, 2004 Three members of the legendary, World War II era Tuskegee Airmen will speak at Jefferson Lab's Black History Month celebration at 2:30 p.m. on Thursday, Feb. 19. The public is invited to the event. The program will start with footage from the 1996 movie based on the true story of the Tuskegee

  8. Africa: Unrest and restrictive terms limit abundant potential. [Oil and gas exploration and development in Africa

    SciTech Connect

    Not Available

    1993-08-01

    This paper summarizes the drilling and exploration activity of the oil and gas industries of Egypt, Libya, Tunisia, Algeria, Morocco, Nigeria, Cameroon, Gabon, the Congo, Angola, and South Africa. Information is provided on current and predicted trends in well drilling activities (both onshore and offshore), numbers of new wells, footage information, production statistics and what fields accounted for this production, and planned new exploration activities. The paper also describes the current status of government policies and political problems affecting the oil and gas industry.

  9. Testimonials - Partnerships in Solid-State Lighting - Cree, Inc. |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Cree, Inc. Testimonials - Partnerships in Solid-State Lighting - Cree, Inc. Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "John Edmond, Director of Advanced Opto Electronics Technology, Cree, Inc." and footage of a man in a showcase room. John Edmond: We should care as a country about creating jobs, and solid-state

  10. Testimonials - Partnerships in Solid-State Lighting - Soraa, Inc. |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Soraa, Inc. Testimonials - Partnerships in Solid-State Lighting - Soraa, Inc. Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "Mike Krames, Chief Technology Officer, Soraa, Inc." and footage of a man in a lab. Mike Krames: The Department of Energy has done a great job in supporting solid-state lighting in the United States.

  11. Clearing the Way for Hanford Site Cleanup | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Clearing the Way for Hanford Site Cleanup Clearing the Way for Hanford Site Cleanup August 15, 2016 - 12:30pm Addthis Clearing the Way for Hanford Site Cleanup Clearing the Way for Hanford Site Cleanup Clearing the Way for Hanford Site Cleanup Clearing the Way for Hanford Site Cleanup RICHLAND, Wash. - Watch time-lapse footage of workers preparing the T Plant canyon deck at the Hanford Site to receive K-West Reactor Fuel Storage Basin sludge by removing the legacy equipment shown in the 2012

  12. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    5 Crude Oil and Natural Gas Exploratory and Development Wells Total Wells Drilled, 1949-2010 Total Wells Drilled by Type, 1949-2010 Successful Wells, 1949-2010 Wells Drilled, 2010 Footage Drilled, 2010 Average Depth, 2010 96 U.S. Energy Information Administration / Annual Energy Review 2011 1 Data are for exploratory and development wells combined. Sources: Tables 4.5-4.7. Total¹ 1950 1960 1970 1980 1990 2000 2010 0 25 50 75 100 Thousand Wells 1950 1960 1970 1980 1990 2000 2010 0 10 20 30 40 50

  13. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    6 Crude Oil and Natural Gas Exploratory Wells, 1949-2010 Exploratory Wells Drilled by Well Type Exploratory Footage Drilled by Well Type Exploratory Wells Average Depth, All Wells Exploratory Wells Average Depth by Well Type 98 U.S. Energy Information Administration / Annual Energy Review 2011 Note: These graphs depict exploratory wells only; see Figure 4.5 for all wells and Figure 4.7 for development wells only. Source: Table 4.6. Dry Holes 1950 1960 1970 1980 1990 2000 2010 0 3 6 9 12 15

  14. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    7 Crude Oil and Natural Gas Development Wells, 1949-2010 Development Wells Drilled by Well Type Development Footage Drilled by Well Type Development Wells Average Depth, All Wells Development Wells Average Depth by Well Type 100 U.S. Energy Information Administration / Annual Energy Review 2011 Note: These graphs depict development wells only; see Figure 4.5 for all wells and Figure 4.6 for exploratory wells only. Source: Table 4.7. 1950 1960 1970 1980 1990 2000 2010 0 10 20 30 40 50 Thousand

  15. United States Air Force Academy solar energy research. Final interim report May 78-Jan 80

    SciTech Connect

    Eden, A.; Benson, J.D.; Cornelius, K.A.; Riggs, G.E.

    1980-07-01

    This research continued to gather operational performance data and maintenance experience on a retrofit residential solar space heating system. Data analysis includes comparison to prior years' results. Separate chapters are devoted to analyzing the performance of evacuated tube collectors and the home's reaction to sole dependency on solar energy during a selected winter period. Considerable attention is given to actions that were taken to prepare the system for a return to normal occupancy (the home was vacant until October 1979). Information concerning the perceived need for development of an operations and maintenance manual and a 'homeowner's' manual is included. Complete copies of the developed manuals are appendices to this report.

  16. Buildings Energy Data Book: 3.2 Commercial Sector Characteristics

    Buildings Energy Data Book

    2 Principal Commercial Building Types, as of 2003 (Percent of Total Floorspace) (1) Office 17% 17% 19% Mercantile 16% 14% 18% Retail 6% 9% 5% Enclosed & Strip Malls 10% 4% 13% Education 14% 8% 11% Warehouse and Storage 14% 12% 7% Lodging 7% 3% 7% Service 6% 13% 4% Public Assembly 5% 6% 5% Religious Worship 5% 8% 2% Health Care 4% 3% 8% Inpatient 3% 0% 6% Outpatient 2% 2% 2% Food Sales 2% 5% 5% Food Service 2% 6% 6% Public Order and Safety 2% 1% 2% Other 2% 2% 4% Vacant 4% 4% 1% Total 100%

  17. Oil and gas developments in west Texas and eastern New Mexico in 1983

    SciTech Connect

    Adams, D.R.; Collier, W.W.; Gail, G.J.; Gaines, G.B.; Gibson, W.R.; Miller, H.A. Jr.; Pause, P.H.; Robbins, L.D.

    1984-10-01

    7034 wells were drilled in west Texas and eastern New Mexico in 1983, 17.2% less than in 1982. The success rate for all wells was 79.8% up 1.1% from 1982. The exploratory success rate decreased to 25.4% in 1983 from 26.4% in 1982. The number of exploratory wells drilled in 1983 decreased 27.1% from 1982, and total exploratory footage decreased 30.1%. The severe decline in exploratory drilling during 1983 was anticipated because seismic crew activity had declined during the 2 preceding years. However, 1983 seismic activity increased 2.1% from 1982, reversing the trend. Therefore, because seismic crew activity is usually a reliable leading indicator of trends in exploratory drilling, an increase in Permian basin wildcat drilling is predicted for mid-1985. In 1983, the number of development wells drilled decreased 15.2% from 1982, and total development footage decreased 17.6%. Development success increased by 0.1% to 89.2%. Oil production for 1983 was 550,473,920 bbl, down 1.7% from 1982. Gas production was 1,995,555,963 mcf, down 9.5% from 1982. Overall leasing activity decreased in 1983. The land sales of New Mexico and the University of Texas received only a fraction of the attention normally paid to them. However, leasing was very aggressive in Glasscock, Midland, and Hockley Counties, Texas, of the Midland basin. 6 figures, 3 tables.

  18. Oil and gas developments in central and southern Africa in 1987

    SciTech Connect

    Hartman, J.B.; Walker, T.L.

    1988-10-01

    Significant rightholding changes took place in central and southern Africa during 1987. Angola, Benin, Congo, Gabon, Ghana, Guinea, Guinea Bissau, Mauritania, Seychelles, Somali Republic, Tanzania, Zaire, and Zambia announced awards or acreage open for bidding. Decreases in exploratory rightholdings occurred in Cameroon, Congo, Cote d'Ivoire, Equatorial Guinea, Gabon, Kenya, Namibia, South Africa, and Tanzania. More wells and greater footage were drilled in 1987 than in 1986. Total wells increased by 18% as 254 wells were completed compared to 217 in 1986. Footage drilled during the year increased by 46% as about 1.9 million ft were drilled compared to about 1.3 million ft in 1986. The success rate for exploration wells in 1987 improved slightly to 36% compared to 34% in 1986. Significant discoveries were made in Nigeria, Angola, Congo, and Gabon. Seismic acquisition in 1987 was the major geophysical activity during the year. Total oil production in 1987 was 773 million bbl (about 2.1 million b/d), a decrease of 7%. The decrease is mostly due to a 14% drop in Nigerian production, which comprises 60% of total regional production. The production share of OPEC countries (Nigeria and Gabon) versus non-OPEC countries of 67% remained unchanged from 1986. 24 figs., 5 tabs.

  19. Consumption

    Energy Information Administration (EIA) (indexed site)

    (million square feet)",,,"Energy Intensity for Sum of Major Fuels (thousand Btusquare foot)" ,"1,001 to 10,000 Square Feet","10,001 to 100,000 Square Feet","Over 100,000...

  20. Consumption

    Energy Information Administration (EIA) (indexed site)

    Using Natural Gas (million square feet)",,,"Natural Gas Energy Intensity (cubic feetsquare foot)" ,"1,001 to 10,000 Square Feet","10,001 to 100,000 Square Feet","Over 100,000...

  1. Btu)","per Building

    Energy Information Administration (EIA) (indexed site)

    ,"Number of Buildings (thousand)","Floorspace (million square feet)","Floorspace per Building (thousand square feet)","Total (trillion Btu)","per Building (million Btu)","per...

  2. c21.xls

    Energy Information Administration (EIA) (indexed site)

    per Building (gallons) per Square Foot (gallons) per Worker (gallons) per Building (thousand dollars) per Square Foot (dollars) per Gallon (dollars) All Buildings...

  3. 1999 CBECS Summary Table for All Building Activities

    Energy Information Administration (EIA) (indexed site)

    Tables 1999 Commercial Buildings Consumption Survey SUMMARY TABLES FOR ALL PRINCIPAL BUILDING ACTIVITIES Number of Buildings (thousand) Floorspace (million square feet) Square...

  4. C16DIV.xls

    Energy Information Administration (EIA) (indexed site)

    cubic feet) per Square Foot (cubic feet) per Worker (thousand cubic feet) per Building (thousand dollars) per Square Foot (dollars) per Thousand Cubic Feet (dollars) NEW...

  5. c25.xls

    Energy Information Administration (EIA) (indexed site)

    per Building (million Btu) per Square Foot (thousand Btu) per Worker (million Btu) per Building (thousand dollars) per Square Foot (dollars) per Thousand Pounds (dollars) All...

  6. C4DIV.xls

    Energy Information Administration (EIA) (indexed site)

    Floorspace per Building (thousand square feet) Total (million dollars) per Building (thousand dollars) per Square Foot (dollars) per Million Btu (dollars) NEW ENGLAND...

  7. C15DIV.xls

    Energy Information Administration (EIA) (indexed site)

    million square feet) Floorspace per Building (thousand square feet) Total (trillion Btu) Total (billion cubic feet) Total (million dollars) NEW ENGLAND ... 45...

  8. Energy Information Administration - Commercial Energy Consumption...

    Gasoline and Diesel Fuel Update

    (million square feet) Energy Intensity for Sum of Major Fuels (thousand Btu square foot) New England Middle Atlantic East North Central New England Middle Atlantic East North...

  9. Powder Diffraction Crystallography Instructional Materials

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    to Least-squares Fitting: A mostly descriptive approach A non-rigorous introduction to linear algebra, linear and non-linear least squares and related concepts. Software...

  10. Health Care Buildings: Subcategories Table

    Energy Information Administration (EIA) (indexed site)

    Subcategories Table Selected Data by Type of Health Care Building Number of Buildings (thousand) Percent of Buildings Floorspace (million square feet) Percent of Floorspace Square...

  11. Residential Buildings Historical Publications reports, data and...

    Annual Energy Outlook

    3 Average LPG Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households ...

  12. Consumption

    Energy Information Administration (EIA) (indexed site)

    (million square feet)",,,"Energy Intensity for Sum of Major Fuels (thousand Btu square foot)" ,"West North Central","South Atlantic","East South Central","West North...

  13. Consumption

    Energy Information Administration (EIA) (indexed site)

    (million square feet)",,,,"Energy Intensity for Sum of Major Fuels (thousand Btu square foot)" ,"North- east","Mid- west","South","West","North- east","Mid-...

  14. c26.xls

    Energy Information Administration (EIA) (indexed site)

    Btu) per Square Foot (thousand Btu) per Worker (million Btu) per Building (thousand dollars) per Square Foot (dollars) per Thousand Pounds (dollars) All Buildings...

  15. Released: Dec 2006

    Energy Information Administration (EIA) (indexed site)

    (thousand square feet)","Total (trillion Btu)","per Building (million Btu)","per Square Foot (thousand Btu)","per Worker (million Btu)" "All Buildings* ...",4645...

  16. Consumption

    Energy Information Administration (EIA) (indexed site)

    (million square feet)",,,"Energy Intensity for Sum of Major Fuels (thousand Btu square foot)" ,"West South Central","Moun- tain","Pacific","West South Central","Moun-...

  17. Micro-CHP Systems for Residential Applications

    SciTech Connect

    Timothy DeValve; Benoit Olsommer

    2007-09-30

    Integrated micro-CHP (Cooling, Heating and Power) system solutions represent an opportunity to address all of the following requirements at once: conservation of scarce energy resources, moderation of pollutant release into our environment, and assured comfort for home-owners. The objective of this effort was to establish strategies for development, demonstration, and sustainable commercialization of cost-effective integrated CHP systems for residential applications. A unified approach to market and opportunity identification, technology assessment, specific system designs, adaptation to modular product platform component conceptual designs was employed. UTRC's recommendation to U.S. Department of Energy is to go ahead with the execution of the proposed product development and commercialization strategy plan under Phase II of this effort. Recent indicators show the emergence of micro-CHP. More than 12,000 micro-CHP systems have been sold worldwide so far, around 7,500 in 2004. Market projections predict a world-wide market growth over 35% per year. In 2004 the installations were mainly in Europe (73.5%) and in Japan (26.4%). The market in North-America is almost non-existent (0.1%). High energy consumption, high energy expenditure, large spark-spread (i.e., difference between electricity and fuel costs), big square footage, and high income are the key conditions for market acceptance. Today, these conditions are best found in the states of New York, Pennsylvania, New Jersey, Wisconsin, Illinois, Indiana, Michigan, Ohio, New England states. A multiple stage development plan is proposed to address risk mitigation. These stages include concept development and supplier engagement, component development, system integration, system demonstration, and field trials. A two stage commercialization strategy is suggested based on two product versions. The first version--a heat and power system named Micro-Cogen, provides the heat and essential electrical power to the homeowner

  18. ABSTRACT: Bioenergy Harvesting Technologies to Supply Crop Residues In a

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Densified Large Square Bale Format | Department of Energy abstract

  19. ABSTRACT: Bioenergy Harvesting Technologies to Supply Crop Residues In a

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Densified Large Square Bale Format | Department of Energy abstract_1

  20. --No Title--

    Energy Information Administration (EIA) (indexed site)

    |Natural Gas Energy Intensity | | | (billion cubic feet) | square feet) | (cubic feetsquare foot) | | |---+---+---...

  1. --No Title--

    Energy Information Administration (EIA) (indexed site)

    Using Electricity (million |Electricity Energy Intensity | | | (billion kWh) | square feet | (kWhsquare foot) | | |---+---...

  2. --No Title--

    Energy Information Administration (EIA) (indexed site)

    (million square | Fuel Oil Energy Intensity | | | (million gallons) | feet) | (gallonssquare foot) | | |---+---+---...

  3. --No Title--

    Energy Information Administration (EIA) (indexed site)

    | Natural Gas Energy Intensity | | | (billion cubic feet) | square feet) | (cubic feetsquare foot) | | |---+---+---...

  4. Petroleum industry in Illinois, 1984. Oil and gas developments. Waterflood operations

    SciTech Connect

    Van Den Berg, J.; Treworgy, J.D.; Elyn, J.R.

    1986-01-01

    The report includes statistical information regarding the petroleum industry in Illinois during 1984. Illinois produced 28,873,000 barrels of crude oil in 1984. The value of this crude is estimated to be $830 million. New test holes drilled for oil and gas numbered 2732 - 4.1% more than in 1983. These tests resulted in 1575 oil wells, 21 gas wells, and 1136 dry holes. In addition, 28 former dry holes were reworked or deepened and completed as producers, and 9 former producers were reworked or deepened and completed as producers in new pay zones. In oil and gas exploration and development, including service wells and structure tests, total footage drilled in 1984 was 6,868,485 feet, 5.5% more than in 1983. Ten oil fields, 50 new pay zones in fields, and 51 extensions to fields were discovered in 1984.

  5. If it Works, Will it Matter?

    SciTech Connect

    Martin, Cheryl; Gerst, Kacy; Gould, Josh, Babinec, Sue

    2015-02-11

    Technical success is one thing, but commercial success is another. ARPA-E’s unique Technology-to-Market program was designed to help our awardees move their research out of the lab and into the market, accelerating the adoption of potentially game-changing technologies. The Technology-to-Market team is dedicated to the common goal of answering the fundamental question: if it works, will it matter? Featuring remarks from Cheryl Martin, ARPA-E’s Deputy Director for Commercialization, as well as interviews with three members of the Technology-to-Market team, this video demonstrates ARPA-E’s commitment to both the development and deployment of transformational energy technologies. The video also incorporates footage shot on site with several ARPA-E awardees, much of which will be highlighted in other videos shown throughout the 2015 ARPA-E Energy Innovation Summit.

  6. Mendelevium: The Way It Was

    ScienceCinema

    None

    2014-10-28

    A reel of black & white film shot nearly 60 years ago has surfaced at Berkeley Lab, depicting the discovery of Mendelevium - or Element 101 - as reenacted by some of the legendary scientists who did the actual work at that time. Since the 1940s, Berkeley Lab scientists were locked in a race to synthesize new elements, and more often than not, they came out winners. Sixteen elements, most of them in the actinide series at the bottom of the periodic table, were discovered and synthesized by its researchers. Retired Berkeley Lab physicist Claude Lyneis found the reel in a box of dusty and deteriorating films slated for disposal. Using digital editing skills he acquired to make videos of his son's lacrosse team, Lyneis has produced and narrated an excerpt of this nearly-lost footage. It is an entertaining and informative look at the pioneering physics performed at UC Berkeley and Lawrence Berkeley National Laboratory's hillside campus.

  7. Oil and gas developments in Atlantic coastal plain and outer Continental Shelf in 1981

    SciTech Connect

    Giordano, A.C.; Amato, R.V.

    1982-11-01

    Exploratory drilling in the Atlantic coastal plain region increased in 1981. Eight wells were drilled, 5 of which were completed for a total footage of 71,439 ft (21,780 m). Four of the wells were located in the Baltimore Canyon Trough area and 4 were located in the Georges Bank basin. No exploratory wells were drilled in the Southeast Georgia Embayment or in the onshore portion of this region in 1981. The 5 completed wells were reported as dry holes. Two lease sales were held in 1981: OCS Lease Sale 56 drew bids on 47 tracts for a total of $342,766,174 in the South Atlantic and OCS Lease Sale 59 drew bids on 50 tracts for a total of $321,981,000 in the Mid-Atlantic. Geophysical activity provided a total of 24,470 line-mi (39,380 line-km) of seismic data.

  8. Superfund record of decision (EPA Region 2): Forest Glen subdivision, Operable Unit 2, Niagara Falls, NY, March 31, 1998

    SciTech Connect

    1998-09-01

    This operable unit represents the second of three operable units planned for the site. It addresses the principal threats posed by the site through controlling the source of contamination. The major components of the selected remedy include: excavation of contaminated soils from the southern portion of the site, and contaminated sediment from East Gill Creek, and consolidation of these materials in the northern portion of the site followed by grading in preparation for placement of the cap; construction of an 8.5-acre cap over the consolidated soils in the northern portion of the site in conformance with the major elements described in 6 New York Code of Rules and Regulations Part 360 for solid waste landfill caps; removal and off-site disposal of the vacant trailers and two permanent homes to facilitate the excavation of soils; and capping the Wooded Wetland with six inches of clean sediment.

  9. Albany Center map_rev36-10

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Bro adw ay Stre et Lib ert y Str ee t Queen Avenue N S1 S2 S3 Locked Gate Locked Gate Locked Gate Locked Gate Locked Gate Locked Gate Walk Gate (locked) Walk Gate (locked) Walk Gate (locked) 0 200 Scale in feet 1 40 33 31 30 29 28 Trailer 2 Trailer 1 27 26 25 23 24 22 20 21 19 18 36 35 37 38 39 34 17 14,15,16 13 7 8 9 10 11 6 12 5 4 2 32 VACANT FEDERAL PROPERTY S4 Gas Sheds Covered Dock Main Gate Security Guard Emergency Gate (Automatic) Locked Gate Locked Gate Walk Gate (locked) Scrap Metal

  10. Ab initio study of helium behavior in titanium tritides

    SciTech Connect

    Liang, J. H.; Dai, Yunya; Yang, Li; Peng, SM; Fan, K. M.; Long, XG; Zhou, X. S.; Zu, Xiaotao; Gao, Fei

    2013-03-01

    Ab initio calculations based on density functional theory have been performed to investigate the relative stability of titanium tritides and the helium behavior in stable titanium tritides. The results show that the β-phase TiT1.5 without two tritium along the [100] direction (TiT1.5[100]) is more stable than other possible structures. The stability of titanium tritides decrease with the increased generation of helium in TiT1.5[100]. In addition, helium generated by tritium decay prefers locating at a tetrahedral site, and favorably migrates between two neighbor vacant tetrahedral sites through an intermediate octahedral site in titanium tritides, with a migration energy of 0.23 eV. Furthermore, helium is easily accumulated on a (100) plane in β-phase TiT1.5[100].

  11. Role of oxygen vacancies in magnetic properties of LaAlO{sub 3}/SrTiO{sub 3} interface

    SciTech Connect

    Mohanta, N.; Taraphder, A.

    2014-04-24

    The interface of two band-insulators SrTiO{sub 3} and LaAlO{sub 3} exhibits a highly conducting two-dimensional electron gas which shows low-temperature superconductivity, ferromagnetism and many other novel properties. Several studies reveal that the oxygen vacancies at the interface have strong influence on the electronic and magnetic properties of the interface electrons. Here, we develop an insight into the effects of oxygen vacancies on the magnetic properties of the system; the oxygen vacancies help in establishing ferromagnetism which competes with superconductivity at low temperatures. Simulated Monte-Carlo annealing suggests an ordering of the oxygen vacant sites and sheds light on the experimental observation of the quenching of magnetic moment on annealing. A possible explanation for the coexistence of superconductivity and ferromagnetism is also discussed.

  12. Zone Level Occupant-Responsive Building Energy Systems at the GSA

    SciTech Connect

    Robinson, Alastair

    2014-03-01

    The General Services Administration (GSA) partnered with the U.S. Department of Energy (DOE) to develop and implement building energy system retrofits, aiming to reduce energy consumption of at least two building systems by a total of 30 percent or more, as part of DOE’s Commercial Building Partnership (CBP) Program. Lawrence Berkeley National Laboratory (LBNL) provided technical expertise in support of this DOE program, working with the GSA and a team of consultants. This case study reports expected energy savings from appropriate energy efficient design and operations modifications to lighting and heating, ventilating and air conditioning (HVAC) systems at the selected study sites. These retrofits comprised installation of new lighting systems with dimming capability and occupancy-sensor control at the individual light fixture level, and utilized lighting system occupancy sensor signals to continually readjust zone-level ventilation airflow according to the number of people present, down to minimum rates when vacant.

  13. Strategies to Address Identified Education Gaps in the Preparation of a National Security Workforce

    SciTech Connect

    2008-06-30

    This report will discuss strategies available to address identified gaps and weaknesses in education efforts aimed at the preparation of a skilled and properly trained national security workforce.The need to adequately train and educate a national security workforce is at a critical juncture. Even though there are an increasing number of college graduates in the appropriate fields, many of these graduates choose to work in the private sector because of more desirable salary and benefit packages. This is contributing to an inability to fill vacant positions at NNSA resulting from high personnel turnover from the large number of retirements. Further, many of the retirees are practically irreplaceable because they are Cold War scientists that have experience and expertise with nuclear weapons.

  14. From US NAVY Mate to Division Leader for Operations - Requirements, Development and Career Paths of LANL/LANSCE Accelerator Operators

    SciTech Connect

    Spickermann, Thomas

    2012-07-26

    There are opportunities for advancement within the team. Operators advance by: (1) Becoming fully qualified - following the LANSCE Accelerator Operator Training Manual, Operator trainees go through 5 levels of qualification, from Radiation Security System to Experimental Area Operator. Must obtain Knowledge and Performance checkouts by an OSS or AOSS, and an End-of-Card checkout by the team leader or RSS engineer (level I). Program was inspired by US NAVY qualification program for nuclear reactor operators. Time to complete: 2-2.5 years. (2) Fully qualified operators are eligible to apply for vacant (OSS)/AOSS positions; and (3) Alternatively, experienced operators can sign up for the voluntary Senior Operator Qualification Program. They must demonstrate in-depth knowledge of all areas of the accelerator complex. Time to complete is 2-3 years (Minimum 4 years from fully qualified). Eligible for promotion to level between qualified operator and AOSS.

  15. ELECTRON IRRADIATION OF SOLIDS

    DOEpatents

    Damask, A.C.

    1959-11-01

    A method is presented for altering physical properties of certain solids, such as enhancing the usefulness of solids, in which atomic interchange occurs through a vacancy mechanism, electron irradiation, and temperature control. In a centain class of metals, alloys, and semiconductors, diffusion or displacement of atoms occurs through a vacancy mechanism, i.e., an atom can only move when there exists a vacant atomic or lattice site in an adjacent position. In the process of the invention highenergy electron irradiation produces additional vacancies in a solid over those normally occurring at a given temperature and allows diffusion of the component atoms of the solid to proceed at temperatures at which it would not occur under thermal means alone in any reasonable length of time. The invention offers a precise way to increase the number of vacancies and thereby, to a controlled degree, change the physical properties of some materials, such as resistivity or hardness.

  16. Photophysical properties of silicon-containing poly[salicylidene azomethine]s

    SciTech Connect

    Alexandrova, E. L.; Ivanov, A. G. Geller, N. M.; Nadezhdina, L. B.; Shamanin, V. V.

    2008-10-15

    Photophysical properties of new silicon-containing 'nonclassical' polyconjugated poly[salicylidene azomethine]s were studied and a free carrier photogeneration mechanism characteristic of them was proposed. It was shown that polymer properties are controlled by the structure of the azomethine fragment and acceptor properties of the silicon atom. Due to multiple specific donor-acceptor interactions of unshared electron pairs of azomethine fragments with vacant d orbitals of silicon atoms, polymers feature photosensitive and photoconductive properties. The estimated photosensitivity S{sub 0.1} {approx} 10{sup 5} cm{sup 2}/J and quantum yield of free carrier Photogeneration {eta} {approx} 0.15 correspond to the level of 'classical' polyconjugated nitrogen-containing aromatic polymers used in optoelectronics.

  17. HUD lead-based-paint abatement demonstration (FHA)

    SciTech Connect

    Not Available

    1991-08-01

    The toxic effects of lead on human beings, and particularly on young children, have been known for many years. Amendments to the Lead-Based Paint Poisoning Prevention Act (LPPPA) in 1987 and 1988 required the U.S. Department of Housing and Urban Development (HUD) to undertake a lead-based paint abatement demonstration program. The overall objective of the demonstration was to 'utilize a sufficient number of abatement methods in a sufficient number of areas and circumstances to demonstrate their relative cost-effectiveness...' One component of the demonstration was conducted in HUD-owned, vacant, single-family properties and was completed in the fall of 1990. A public housing component is expected to be completed in 1991. The report describes the objectives, research design, experience and findings of the completed component, which is generally known as the FHA demonstration, named after the Federal Housing Administration, which held title to the houses.

  18. Dynamics of water in prussian blue analogues: Neutron scattering study

    SciTech Connect

    Sharma, V. K.; Mitra, S.; Thakur, N.; Yusuf, S. M.; Mukhopadhyay, R.; Juranyi, Fanni

    2014-07-21

    Dynamics of crystal water in Prussian blue (PB), Fe(III){sub 4}[Fe(II)(CN){sub 6}]{sub 3}.14H{sub 2}O and its analogue Prussian green (PG), ferriferricynaide, Fe(III){sub 4}[Fe(III)(CN){sub 6}]{sub 4}.16H{sub 2}O have been investigated using Quasielastic Neutron Scattering (QENS) technique. PB and its analogue compounds are important materials for their various interesting multifunctional properties. It is known that crystal water plays a crucial role towards the multifunctional properties of Prussian blue analogue compounds. Three structurally distinguishable water molecules: (i) coordinated water molecules at empty nitrogen sites, (ii) non-coordinated water molecules in the spherical cavities, and (iii) at interstitial sites exist in PB. Here spherical cavities are created due to the vacant sites of Fe(CN){sub 6} units. However, PG does not have any such vacant N or Fe(CN){sub 6} units, and only one kind of water molecules, exists only at interstitial sites. QENS experiments have been carried out on both the compounds in the temperature range of 260360?K to elucidate the dynamical behavior of different kinds of water molecules. Dynamics is found to be much more pronounced in case of PB, compared to PG. A detailed data analysis showed that localized translational diffusion model could describe the observed data for both PB and PG systems. The average diffusion coefficient is found to be much larger in the PB than PG. The obtained domain of dynamics is found to be consistent with the geometry of the structure of the two systems. Combining the data of the two systems, a quantitative estimate of the dynamics, corresponding to the water molecules at different locations is made.

  19. Buildings*","Building Size"

    Energy Information Administration (EIA) (indexed site)

    B7. Building Size, Floorspace for Non-Mall Buildings, 2003" ,"Total Floorspace (million square feet)" ,"All Buildings*","Building Size" ,,"1,001 to 5,000 Square Feet","5,001 to 10,000 Square Feet","10,000 to 25,000 Square Feet","25,001 to 50,000 Square Feet","50,001 to 100,000 Square Feet","100,001 to 200,000 Square Feet","200,001 to 500,000 Square Feet","Over 500,000 Square Feet"

  20. Energy Information Administration (EIA)- About the Commercial Buildings

    Gasoline and Diesel Fuel Update

    Energy Consumption Survey (CBECS) B7. Building size, floorspace, 2012 Released: May 2016 Total floorspace (million square feet) Building size All buildings 1,001 to 5,000 square feet 5,001 to 10,000 square feet 10,001 to 25,000 square feet 25,001 to 50,000 square feet 50,001 to 100,000 square feet 100,001 to 200,000 square feet 200,001 to 500,000 square feet Over 500,000 square feet All buildings 87,093 8,041 8,900 14,105 11,917 13,918 12,415 10,724 7,074 Principal building activity

  1. C10DIV.xls

    Energy Information Administration (EIA) (indexed site)

    Building (thousand kWh) per Square Foot (kWh) per Worker (thousand kWh) per Building (thousand dollars) per Square Foot (dollars) per kWh (dollars) NEW ENGLAND...

  2. 1992 CBECS C&E Table 3.29

    Energy Information Administration (EIA) (indexed site)

    per Square Foot and Load Factors, 1992 Building Characteristics RSE Column Factor: All Demand-Metered Buildings Peak Watts per Square Foot Load Factor RSE Row Factor Number of...

  3. b6.xls

    Energy Information Administration (EIA) (indexed site)

    Revised June 2006 49 Released: June 2006 Next CBECS will be conducted in 2007 1,001 to 5,000 Square Feet 5,001 to 10,000 Square Feet 10,000 to 25,000 Square Feet 25,001 to 50,000 Square Feet 50,001 to 100,000 Square Feet 100,001 to 200,000 Square Feet 200,001 to 500,000 Square Feet Over 500,000 Square Feet All Buildings* .................................. 4,645 2,552 889 738 241 129 65 25 7 Table B6. Building Size, Number of Buildings for Non-Mall Buildings, 2003 Number of Buildings (thousand)

  4. Buildings*","Building Size"

    Energy Information Administration (EIA) (indexed site)

    B6. Building Size, Number of Buildings for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)" ,"All Buildings*","Building Size" ,,"1,001 to 5,000 Square Feet","5,001 to 10,000 Square Feet","10,000 to 25,000 Square Feet","25,001 to 50,000 Square Feet","50,001 to 100,000 Square Feet","100,001 to 200,000 Square Feet","200,001 to 500,000 Square Feet","Over 500,000 Square Feet"

  5. FACT SHEET U.S. Department of Energy Southern Great Plains

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    50 instruments over 25 locations covering over 35,000 square miles (90,000 square kilometers) and can be viewed as a real "laboratory without walls." The heart of the SGP is the...

  6. Ground Gravity Survey At Truckhaven Area (Layman Energy Associates...

    OpenEI (Open Energy Information) [EERE & EIA]

    9. The 95 magnetotelluric (MT) soundings cover a central area of about 80 square kilometers. The 126 gravity stations extend over a broader area of about 150 square kilometers,...

  7. Magnetotellurics At Truckhaven Area (Layman Energy Associates...

    OpenEI (Open Energy Information) [EERE & EIA]

    9. The 95 magnetotelluric (MT) soundings cover a central area of about 80 square kilometers. The 126 gravity stations extend over a broader area of about 150 square kilometers,...

  8. Nov. 8, 2015

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    A very special event Nov 8, 2015 with Phil Jamison Square Dance Party at 6:30 p.m. Southern Style Square Dance Calling Workshop at 2 p.m. Kuhn Village Barn general info Join us for...

  9. Energy End-Use Intensities in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    lighting intensities per lighted square foot-hour (Figure 23). * Food service and health care buildings had the highest water-heating intensities per square foot--more than...

  10. Consumption

    Energy Information Administration (EIA) (indexed site)

    (million square feet)",,,"Energy Intensity for Sum of Major Fuels (thousand Btu square foot)" ,"New England","Middle Atlantic","East North Central","New England","Middle...

  11. Consumption

    Energy Information Administration (EIA) (indexed site)

    (million square feet)",,,,,"Energy Intensity for Sum of Major Fuels (thousand Btu square foot)" ,"Zone 1","Zone 2","Zone 3","Zone 4","Zone 5","Zone 1","Zone 2","Zone 3","Zone...

  12. --No Title--

    Buildings Energy Data Book

    Share of Average Home Size (1) Average Home Size Census Division U.S. Housing Stock (total square feet) (heated square feet) Northeast 19% 2,423 1,664 New England 5% 2,552 1,680 ...

  13. Energy Information Administration (EIA)- About the Commercial Buildings

    Gasoline and Diesel Fuel Update

    Energy Consumption Survey (CBECS) B6. Building size, number of buildings, 2012 Released: May 2016 Number of buildings (thousand) Building size All buildings 1,001 to 5,000 square feet 5,001 to 10,000 square feet 10,001 to 25,000 square feet 25,001 to 50,000 square feet 50,001 to 100,000 square feet 100,001 to 200,000 square feet 200,001 to 500,000 square feet Over 500,000 square feet All buildings 5,557 2,777 1,229 884 332 199 90 38 8 Principal building activity Education 389 143 51 75 41 48

  14. Health Care Buildings

    Energy Information Administration (EIA) (indexed site)

    also tended to be larger than those not on complexes. The average building on a complex was 79.9 thousand square feet, compared to 11.2 thousand square feet for buildings...

  15. Obama Administration Announces 14 Initial Partners in the Better Buildings Challenge

    Energy.gov [DOE]

    Private sector partners, local governments commit more than $500 million and 300 million square feet to improving energy efficiency

  16. Table 6a. Total Electricity Consumption per Effective Occupied...

    Energy Information Administration (EIA) (indexed site)

    a. Total Electricity Consumption per Effective Occupied Square Foot, 1992 Building Characteristics All Buildings Using Electricity (thousand) Total Electricity Consumption...

  17. The Rhythm Engineers | Y-12 National Security Complex

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The Rhythm Engineers The Rhythm Engineers The Rhythm Engineers entertain in front of a drawing of Jackson Square...

  18. Table 2.10 Commercial Buildings Energy Consumption and Expenditure Indicators, Selected Years, 1979-2003

    Energy Information Administration (EIA) (indexed site)

    0 Commercial Buildings Energy Consumption and Expenditure Indicators, Selected Years, 1979-2003 Energy Source and Year Building Characteristics Energy Consumption Energy Expenditures Number of Buildings Total Square Feet Square Feet per Building Total Per Building Per Square Foot Per Employee Total Per Building Per Square Foot Per Million Btu Thousands Millions Thousands Trillion Btu Million Btu Thousand Btu Million Btu Million Dollars 1 Thousand Dollars 1 Dollars 1 Dollars 1 Major Sources 2

  19. Synthesis, characterization, and application of metal organic framework nanostructures

    SciTech Connect

    Fernandez, Carlos A.; Nune, Satish K.; Motkuri, Radha K.; Thallapally, Praveen K.; Wang, Chong M.; Liu, Jun; Exarhos, Gregory J.; McGrail, B. Peter

    2010-12-21

    Nano sized (square and cube) prussian blue analogues were synthesized using PVP, AOT and Chitosan as stabilizers at room temperature

  20. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    3 Table 2.10 Commercial Buildings Energy Consumption and Expenditure Indicators, Selected Years, 1979-2003 Energy Source and Year Building Characteristics Energy Consumption Energy Expenditures Number of Buildings Total Square Feet Square Feet per Building Total Per Building Per Square Foot Per Employee Total Per Building Per Square Foot Per Million Btu Thousands Millions Thousands Trillion Btu Million Btu Thousand Btu Million Btu Million Dollars 1 Thousand Dollars 1 Dollars 1 Dollars 1 Major

  1. b7.xls

    Energy Information Administration (EIA) (indexed site)

    Square Feet 50,001 to 100,000 Square Feet 100,001 to 200,000 Square Feet 200,001 to 500,000 Square Feet Over 500,000 Square Feet All Buildings* .................................. 64,783 6,789 6,585 11,535 8,668 9,057 9,064 7,176 5,908 Principal Building Activity Education .......................................... 9,874 409 399 931 1,756 2,690 2,167 1,420 Q Food Sales ....................................... 1,255 409 356 Q Q Q Q N N Food Service ..................................... 1,654 544

  2. SUPPLEMENT ANALYSIS PROPOSED SHIPMENT OF COMMERCIAL SPENT NUCLEAR FUEL

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    SUPPLEMENT ANALYSIS PROPOSED SHIPMENT OF COMMERCIAL SPENT NUCLEAR FUEL TO DOE NATIONAL LABORATORIES FOR RESEARCH AND DEVELOPMENT PURPOSES Office of Nuclear Energy U.S. DEPARTMENT OF ENERGY DECEMBER 2015 DOE/EIS-0203-SA-07 DOE/EIS-0250F-S-1-SA-02 Commercial Fuel Shipment SA DOE/EIS-0203-SA-07 December 2015 CONVERSION FACTORS Metric to English English to Metric Multiply by To get Multiply by To get Area Square kilometers 247.1 Acres Square kilometers 0.3861 Square miles Square meters 10.764 Square

  3. World trends: Improving fortunes restore upstream health

    SciTech Connect

    1996-08-01

    After a decade of recovery from the oil price collapse of 1986, the global upstream industry appears headed for a period of renewed strength and growth. Underpinning the prosperity is steady unrelenting growth in crude demand. Stronger global crude demand and heavy natural gas usage in the US are driving higher prices. Operators are reacting to better prices with larger drilling programs. Also boosting drilling levels are crude production expansion projects that many countries have underway in response to perceived future demand. Not surprisingly, World Oil`s outlook calls for global drilling to rise 4.5% to 60,273 wells, a second straight annual increase. Better US activity is helping, but so are stronger-than-expected numbers in Canada. Meanwhile, World Oil`s 51st annual survey of governments and operators indicates that global oil production rose 1.4% last year, to 62,774 million bpd. That was not enough, however, to keep up with demand. The paper discusses financial performance, business practices, other factors, and operating outlook. A table lists the 1996 forecasts, estimated wells drilled in 1995, and total wells and footage drilled in 1994 by country. A second table lists global crude and condensate production and wells actually producing in 1995 versus 1994.

  4. Uranium

    SciTech Connect

    Gabelman, J.W.; Chenoweth, W.L.; Ingerson, E.

    1981-10-01

    The uranium production industry is well into its third recession during the nuclear era (since 1945). Exploration is drastically curtailed, and many staffs are being reduced. Historical market price production trends are discussed. A total of 3.07 million acres of land was acquired for exploration; drastic decrease. Surface drilling footage was reduced sharply; an estimated 250 drill rigs were used by the uranium industry during 1980. Land acquisition costs increased 8%. The domestic reserve changes are detailed by cause: exploration, re-evaluation, or production. Two significant discoveries of deposits were made in Mohave County, Arizona. Uranium production during 1980 was 21,850 short tons U/sub 3/O/sub 8/; an increase of 17% from 1979. Domestic and foreign exploration highlights were given. Major producing areas for the US are San Juan basin, Wyoming basins, Texas coastal plain, Paradox basin, northeastern Washington, Henry Mountains, Utah, central Colorado, and the McDermitt caldera in Nevada and Oregon. 3 figures, 8 tables. (DP)

  5. Non-parametric transformation for data correlation and integration: From theory to practice

    SciTech Connect

    Datta-Gupta, A.; Xue, Guoping; Lee, Sang Heon

    1997-08-01

    The purpose of this paper is two-fold. First, we introduce the use of non-parametric transformations for correlating petrophysical data during reservoir characterization. Such transformations are completely data driven and do not require a priori functional relationship between response and predictor variables which is the case with traditional multiple regression. The transformations are very general, computationally efficient and can easily handle mixed data types for example, continuous variables such as porosity, permeability and categorical variables such as rock type, lithofacies. The power of the non-parametric transformation techniques for data correlation has been illustrated through synthetic and field examples. Second, we utilize these transformations to propose a two-stage approach for data integration during heterogeneity characterization. The principal advantages of our approach over traditional cokriging or cosimulation methods are: (1) it does not require a linear relationship between primary and secondary data, (2) it exploits the secondary information to its fullest potential by maximizing the correlation between the primary and secondary data, (3) it can be easily applied to cases where several types of secondary or soft data are involved, and (4) it significantly reduces variance function calculations and thus, greatly facilitates non-Gaussian cosimulation. We demonstrate the data integration procedure using synthetic and field examples. The field example involves estimation of pore-footage distribution using well data and multiple seismic attributes.

  6. Wireless remote liquid level detector and indicator for well testing

    DOEpatents

    Fasching, George E.; Evans, Donald M.; Ernest, John H.

    1985-01-01

    An acoustic system is provided for measuring the fluid level in oil, gas or water wells under pressure conditions that does not require an electrical link to the surface for level detection. A battery powered sound transmitter is integrated with a liquid sensor in the form of a conductivity probe, enclosed in a sealed housing which is lowered into a well by means of a wire line reel assembly. The sound transmitter generates an intense identifiable acoustic emission when the sensor contacts liquid in the well. The acoustic emissions propagate up the well which functions as a waveguide and are detected by an acoustic transducer. The output signal from the transducer is filtered to provide noise rejection outside of the acoustic signal spectrum. The filtered signal is used to indicate to an operator the liquid level in the well has been reached and the depth is read from a footage counter coupled with the wire line reel assembly at the instant the sound signal is received.

  7. Image mosaicing for automated pipe scanning

    SciTech Connect

    Summan, Rahul Dobie, Gordon Guarato, Francesco MacLeod, Charles Marshall, Stephen Pierce, Gareth; Forrester, Cailean; Bolton, Gary

    2015-03-31

    Remote visual inspection (RVI) is critical for the inspection of the interior condition of pipelines particularly in the nuclear and oil and gas industries. Conventional RVI equipment produces a video which is analysed online by a trained inspector employing expert knowledge. Due to the potentially disorientating nature of the footage, this is a time intensive and difficult activity. In this paper a new probe for such visual inspections is presented. The device employs a catadioptric lens coupled with feature based structure from motion to create a 3D model of the interior surface of a pipeline. Reliance upon the availability of image features is mitigated through orientation and distance estimates from an inertial measurement unit and encoder respectively. Such a model affords a global view of the data thus permitting a greater appreciation of the nature and extent of defects. Furthermore, the technique estimates the 3D position and orientation of the probe thus providing information to direct remedial action. Results are presented for both synthetic and real pipe sections. The former enables the accuracy of the generated model to be assessed while the latter demonstrates the efficacy of the technique in a practice.

  8. How loads affect coiled tubing life

    SciTech Connect

    Walker, E.J. Inc., AK )

    1992-01-01

    Fatigue testing was performed on 1-3/4-in OD, 0.125 in. wall thickness (WT) coiled tubing using a standard coiled tubing unit (CTU) as shown in this paper. Testing was conducted under Prudhoe Bay, Alaska oil well, conditions to determine the effects of axial load, internal pressure and bending stress on the longevity, or usable running footage, that can be expected with larger diameter tubing. The CTU was rigged up in a standard configuration with injector head 50 ft off the ground, the worst case for bending on most currently available North Slope units. Internal pressure was supplied by a small triplex pump and the end of tubing was closed off with a fishing neck and bull plug. Weight, for the first four tests, was suspended from the coiled tubing by a special clamp. The tubing was cycled up and over the guide arch until a loss of internal coiled tubing pressure (CTP) occurred, or until the tubing became stuck in the stripper brass.

  9. Influence of a combustion-driven oscillation on global mixing in the flame from a refinery flare

    SciTech Connect

    Langman, A.S.; Nathan, G.J.

    2011-01-15

    An assessment of the influence of strong combustion-driven oscillations on mixing rates and visible radiation in the flame from a full-scale refinery flare is reported. Importantly, the oscillations were generated naturally, with no external forcing, and at a high Reynolds number of 4 x 10{sup 6}. These conditions differentiate this study from those of previous investigations, which all involved some external forcing and were at a Re too low to ensure fully turbulent flow within the flame. A frame-by-frame analysis of video footage, providing good resolution of the instantaneous edge of each flame, was used to assess flame dimensions, and so to determine a global residence time. Since the flames are in the fast-chemistry regime, the visual imagers can be used to determine a global mixing rate. The analysis reveals a consistent picture that the combustion-driven oscillations do not result in a significant change to the global mixing rate, but do increase the visible radiation. This is in contrast to previous investigations, using externally forced jets, where forcing at the preferred mode has been found to increase mixing rates and reduce radiation. (author)

  10. Superfund Record of Decision (Region 2): Love Canal/93rd Street, New York (third remedial action), September 1988

    SciTech Connect

    Not Available

    1988-09-26

    The Love Canal/93rd Street School site consists of approximately 19 acres and includes a school and an adjacent vacant lot. The site is located in Niagara Falls, New York, less than one mile northwest of Love Canal and is within the Love Canal Emergency Declaration Area. Hooker Chemicals and Plastics Corporation disposed of over 21,000 tons of various chemicals at the Love Canal site from 1942 to 1953, when the site was deeded over to the City of Niagara Falls Board of Education. Sampling has revealed that approximately 6,000 cu yds of soil are contaminated. During the 1950s, home construction accelerated in the area. Specifically, in 1950, the 93rd Street School was built, and in 1954, the 99th Street School was built adjacent to the middle portion of the Canal. Prior to construction of the 93rd Street School, a drainage swale crossed the site. Between 1938 and 1951, the swale was partially filled with soil and rock debris, followed by sand and fly ash materials. In 1980, the 93rd Street School was closed due to public health concerns related to the potentially contaminated fill material. The primary contaminants of concern affecting soil are VOCs, including toluene and xylenes, other organics including dioxins, PAHs and pesticides, and metals including arsenic and lead.

  11. Tech Area II: A history

    SciTech Connect

    Ullrich, R.

    1998-07-01

    This report documents the history of the major buildings in Sandia National Laboratories` Technical Area II. It was prepared in support of the Department of Energy`s compliance with Section 106 of the National Historic Preservation Act. Technical Area II was designed and constructed in 1948 specifically for the final assembly of the non-nuclear components of nuclear weapons, and was the primary site conducting such assembly until 1952. Both the architecture and location of the oldest buildings in the area reflect their original purpose. Assembly activities continued in Area II from 1952 to 1957, but the major responsibility for this work shifted to other sites in the Atomic Energy Commission`s integrated contractor complex. Gradually, additional buildings were constructed and the original buildings were modified. After 1960, the Area`s primary purpose was the research and testing of high-explosive components for nuclear weapons. In 1994, Sandia constructed new facilities for work on high-explosive components outside of the original Area II diamond-shaped parcel. Most of the buildings in the area are vacant and Sandia has no plans to use them. They are proposed for decontamination and demolition as funding becomes available.

  12. Homoleptic Ce(III) and Ce(IV) Nitroxide Complexes: Significant Stabilization of the 4+ Oxidation State

    SciTech Connect

    Bogart, Justin A.; Lewis, Andrew J.; Medling, Scott A.; Piro, Nicholas A.; Carroll, Patrick J.; Booth, Corwin H.; Schelter, Eric J.

    2014-06-25

    Electrochemical experiments performed on the complex Ce-IV[2-((BuNO)-Bu-t)py](4), where [2-((BuNO)-Bu-t)py](-) = N-tert-butyl-N-2-pyridylnitroxide, indicate a 2.51 V stabilization of the 4+ oxidation state of Ce compared to [(Bu4N)-Bu-n](2)[Ce(NO3)(6)] in acetonitrile and a 2.95 V stabilization compared to the standard potential for the ion under aqueous conditions. Density functional theory calculations suggest that this preference for the higher oxidation state is a result of the tetrakis(nitroxide) ligand framework at the Ce cation, which allows for effective electron donation into, and partial covalent overlap with, vacant 4f orbitals with delta symmetry. The results speak to the behavior of CeO2 and related solid solutions in oxygen uptake and transport applications, in particular an inherent local character of bonding that stabilizes the 4+ oxidation state. The results indicate a cerium(IV) complex that has been stabilized to an unprecedented degree through tuning of its ligand-field environment.

  13. Supporting Dynamic Spectrum Access in Heterogeneous LTE+ Networks

    SciTech Connect

    Luiz A. DaSilva; Ryan E. Irwin; Mike Benonis

    2012-08-01

    As early as 2014, mobile network operators’ spectral capac- ity is expected to be overwhelmed by the demand brought on by new devices and applications. With Long Term Evo- lution Advanced (LTE+) networks likely as the future one world 4G standard, network operators may need to deploy a Dynamic Spectrum Access (DSA) overlay in Heterogeneous Networks (HetNets) to extend coverage, increase spectrum efficiency, and increase the capacity of these networks. In this paper, we propose three new management frameworks for DSA in an LTE+ HetNet: Spectrum Accountability Client, Cell Spectrum Management, and Domain Spectrum Man- agement. For these spectrum management frameworks, we define protocol interfaces and operational signaling scenar- ios to support cooperative sensing, spectrum lease manage- ment, and alarm scenarios for rule adjustment. We also quan- tify, through integer programs, the benefits of using DSA in an LTE+ HetNet, that can opportunistically reuse vacant TV and GSM spectrum. Using integer programs, we consider a topology using Geographic Information System data from the Blacksburg, VA metro area to assess the realistic benefits of DSA in an LTE+ HetNet.

  14. Carbon doping of III-V compound semiconductors

    SciTech Connect

    Moll, A.J.

    1994-09-01

    Focus of the study is C acceptor doping of GaAs, since C diffusion coefficient is at least one order of magnitude lower than that of other common p-type dopants in GaAs. C ion implantation results in a concentration of free holes in the valence band < 10% of that of the implanted C atoms for doses > 10{sup 14}/cm{sup 2}. Rutherford backscattering, electrical measurements, Raman spectroscopy, and Fourier transform infrared spectroscopy were amonth the techniques used. Ga co-implantation increased the C activation in two steps: first, the additional radiation damage creates vacant As sites that the implanted C can occupy, and second, it maintains the stoichiometry of the implanted layer, reducing the number of compensating native defects. In InP, the behavior of C was different from that in GaAs. C acts as n-type dopant in the In site; however, its incorporation by implantation was difficult to control; experiments using P co-implants were inconsistent. The lattice position of inactive C in GaAs in implanted and epitaxial layers is discussed; evidence for formation of C precipitates in GaAs and InP was found. Correlation of the results with literature on C doping in III-V semiconductors led to a phenomenological description of C in III-V compounds (particularly GaAs): The behavior of C is controlled by the chemical nature of C and the instrinsic Fermi level stabilization energy of the material.

  15. Tailoring Vacancies Far Beyond Intrinsic Levels Changes the Carrier Type and Optical Response in Monolayer MoSe 2-x Crystals

    DOE PAGES [OSTI]

    Mahjouri-Samani, Masoud; Liang, Liangbo; Oyedele, Akinola; Kim, Yong-Sung; Tian, Mengkun; Cross, Nicholas; Wang, Kai; Lin, Ming-Wei; Boulesbaa, Abdelaziz; Rouleau, Christopher M.; et al

    2016-07-14

    Defect engineering has been a critical step in controlling the transport characteristics of electronic devices, and the ability to create, tune, and annihilate defects is essential to enable the range of next-generation devices. Whereas defect formation has been well-demonstrated in three-dimensional semiconductors, similar exploration of the heterogeneity in atomically thin two-dimensional semiconductors and the link between their atomic structures, defects, and properties has not yet been extensively studied. In this paper, we demonstrate the growth of MoSe2–x single crystals with selenium (Se) vacancies far beyond intrinsic levels, up to ~20%, that exhibit a remarkable transition in electrical transport properties frommore » n- to p-type character with increasing Se vacancy concentration. A new defect-activated phonon band at ~250 cm-1 appears, and the A1g Raman characteristic mode at 240 cm-1 softens toward ~230 cm-1 which serves as a fingerprint of vacancy concentration in the crystals. We show that post-selenization using pulsed laser evaporated Se atoms can repair Se-vacant sites to nearly recover the properties of the pristine crystals. Finally, first-principles calculations reveal the underlying mechanisms for the corresponding vacancy-induced electrical and optical transitions.« less

  16. Magnetism and Metal-Insulator Transition in Oxygen Deficient SrTiO3

    SciTech Connect

    Lopez-Bezanilla, Alejandro; Ganesh, Panchapakesan; Littlewood, Peter B.

    2015-09-08

    First-principles calculations to study the electronic and magnetic properties of bulk, oxygen-deficient SrTiO3 (STO) under different doping conditions and densities have been conducted. The appearance of magnetism in oxygen-deficient STO is not determined solely by the presence of a single oxygen vacancy but by the density of free carriers and the relative proximity of the vacant sites. We find that while an isolated vacancy behaves as a nonmagnetic double donor, manipulation of the doping conditions allows the stability of a single-donor state, with emergent local moments coupled ferromagnetically by carriers in the conduction band. Strong local lattice distortions enhance the binding of this state. The energy of the in-gap local moment can be further tuned by orthorhombic strain. Consequently we find that the free-carrier density and strain are fundamental components to obtaining trapped spin-polarized electrons in oxygen-deficient STO, which may have important implications in the design of optical devices.

  17. Magnetism and Metal-Insulator Transition in Oxygen Deficient SrTiO3

    DOE PAGES [OSTI]

    Lopez-Bezanilla, Alejandro; Ganesh, Panchapakesan; Littlewood, Peter B.

    2015-09-08

    First-principles calculations to study the electronic and magnetic properties of bulk, oxygen-deficient SrTiO3 (STO) under different doping conditions and densities have been conducted. The appearance of magnetism in oxygen-deficient STO is not determined solely by the presence of a single oxygen vacancy but by the density of free carriers and the relative proximity of the vacant sites. We find that while an isolated vacancy behaves as a nonmagnetic double donor, manipulation of the doping conditions allows the stability of a single-donor state, with emergent local moments coupled ferromagnetically by carriers in the conduction band. Strong local lattice distortions enhance themore » binding of this state. The energy of the in-gap local moment can be further tuned by orthorhombic strain. Consequently we find that the free-carrier density and strain are fundamental components to obtaining trapped spin-polarized electrons in oxygen-deficient STO, which may have important implications in the design of optical devices.« less

  18. On chemical distances and shape theorems in percolation models with long-range correlations

    SciTech Connect

    Drewitz, Alexander; Rth, Balzs; Sapozhnikov, Artm

    2014-08-01

    In this paper, we provide general conditions on a one parameter family of random infinite subsets of Z{sup d} to contain a unique infinite connected component for which the chemical distances are comparable to the Euclidean distance. In addition, we show that these conditions also imply a shape theorem for the corresponding infinite connected component. By verifying these conditions for specific models, we obtain novel results about the structure of the infinite connected component of the vacant set of random interlacements and the level sets of the Gaussian free field. As a byproduct, we obtain alternative proofs to the corresponding results for random interlacements in the work of Cern and Popov [On the internal distance in the interlacement set, Electron. J. Probab. 17(29), 125 (2012)], and while our main interest is in percolation models with long-range correlations, we also recover results in the spirit of the work of Antal and Pisztora [On the chemical distance for supercritical Bernoulli percolation, Ann Probab. 24(2), 10361048 (1996)] for Bernoulli percolation. Finally, as a corollary, we derive new results about the (chemical) diameter of the largest connected component in the complement of the trace of the random walk on the torus.

  19. New Brunswick Site annual environmental report for calendar year 1991, New Brunswick, New Jersey. Formerly Utilized Sites Remedial Action Program (FUSRAP)

    SciTech Connect

    Not Available

    1992-09-01

    This document describes the environmental monitoring program at the New Brunswick Site (NBS) and surrounding area, implementation of the program, and monitoring results for 1991. The site, near New Brunswick,, New Jersey, is a 5.6-acre vacant, fenced, and grass-covered area. Environmental monitoring of NBS began in 1981 when the site was part of the US Department of Energy`s (DOE) Surplus Facilities Management Program. In 1990 responsibility for NBS was transferred to the Formerly Utilized Sites Remedial Action Program (FUSP.4P). FUSRAP is a DOE program to identify and decontaminate or otherwise control sites where residual radioactive materials remain from the,early years of the nation`s atomic energy program or from commercial operations causing conditions that Congress has authorized DOE to remedy. The environmental monitoring program at NBS includes sampling networks for radon and thoron in air; external gamma radiation exposure; and radium-226, radium-228, thorium-228, thorium-230, thorium-232, americium-241, cesium-137, plutonium-239, and total uranium in surface water, sediment, and groundwater. Several nonradiological parameters are also measured in groundwater, surface water, and sediments. Monitoring results are compared with applicable Environmental Protection Agency standards, DOE derived concentration guides, dose limits, and other requirements in DOE orders. Environmental standards are established to protect public health and the environment.

  20. Transforming MOFs for energy applications using the guest@MOF concept

    DOE PAGES [OSTI]

    Ullman, Andrew M.; Brown, Jonathan W.; Foster, Michael E.; Leonard, Francois; Leong, Kirsty; Stavila, Vitalie; Allendorf, Mark D.

    2016-07-11

    As the world transitions from fossil fuels to clean energy sources in the coming decades, many technological challenges will require chemists and material scientists to develop new materials for applications related to energy conversion, storage, and efficiency. Because of their unprecedented adaptability, metal–organic frameworks (MOFs) will factor strongly in this portfolio. By utilizing the broad synthetic toolkit provided by the fields of organic and inorganic chemistry, MOF pores can be customized to suit a particular application. Of particular importance is the ability to tune the strength of the interaction between the MOF pores and guest molecules. By cleverly controlling thesemore » MOF–guest interactions, the chemist may impart new function into the Guest@MOF materials otherwise lacking in vacant MOF. Herein, we highlight the concept of the Guest@MOF as it relates to our efforts to develop these materials for energy-related applicatons. Additionally, our work in the areas of H2 and noble gas storage, hydrogenolysis of biomass, light-harvesting, and conductive materials will be discussed. Of relevance to light-harvesting applications, we report for the first time a postsynthetic modification strategy for increasing the loading of a light-sensitive electron-donor molecule in the pores of a functionalized MIL-101 structure. Through the demonstrated versatility of these approaches, we show that, by treating guest molecules as integral design elements for new MOF constructs, MOF science can have a significant impact on the advancement of clean energy technologies.« less

  1. Health-hazard evaluation report HETA 90-070-2181, HUD Lead-Based Paint Abatement Demonstration Project

    SciTech Connect

    Sussell, A.L.

    1992-02-01

    In response to a request from the Department of Housing and Urban Development (HUD) Officer for Policy Development and Research, an investigation was made into possible hazardous working conditions during the HUD Lead Based Paint Abatement Demonstration (SIC-1521). The demonstration took place in 172 vacant housing units in several different cities. The abatement methods used included abrasive removal, chemical removal, heat gun removal, encapsulation, enclosure, and replacement. Evaluations were made during the demonstrations and it was determined that the workers were exposed to lead (7439921) with the highest exposure levels coming during the heat gun method of removal. Exposures to volatile organic compounds were low. Maximum personal and general area airborne lead concentrations were 916 micrograms/cubic meter and 1296 micrograms/cubic meter, respectively. Soil sampling indicated that lead paint abatement in some cases resulted in increases in soil lead levels 1 to 3 feet from the exterior walls. The author concludes that workers were potentially overexposed to lead during lead abatement. The author recommend specific measures concerning training, work practices, engineering controls, safety programs, risk assessment, respiratory protection programs, medical monitoring and surveillance.

  2. Released: June 2006

    Energy Information Administration (EIA) (indexed site)

    . Summary Table: Totals and Medians of Floorspace, Number of Workers, and Hours of Operation for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)","Total Floorspace (million square feet)","Total Workers in All Buildings (thousand)","Median Square Feet per Building (thousand)","Median Square Feet per Worker","Median Hours per Week","Median Age of Buildings (years)" "All Buildings*

  3. Tax Credits, Rebates & Savings | Department of Energy

    Energy.gov [DOE] (indexed site)

    Refrigeration Equipment Duke Energy Progress- Commercial and Industrial Energy-Efficiency Program New buildings greater than 20,000 square feet and designed with a projected...

  4. City of Houston Joins Better Buildings Challenge, Partners with...

    Office of Environmental Management (EM)

    Houston is the latest community to join the Challenge, a public-private partnership that ... 30 million square feet of public and private buildings throughout the city. "As ...

  5. Consumption

    Energy Information Administration (EIA) (indexed site)

    3. Electricity Consumption and Conditional Energy Intensity, 1999" ,"Total Electricity Consumption (billion kWh)",,,"Total Floorspace of Buildings Using Electricity (million square...

  6. Released: Dec 2006

    Energy Information Administration (EIA) (indexed site)

    A. Electricity Consumption and Expenditure Intensities for All Buildings, 2003" ,"Electricity Consumption",,,,,"Electricity Expenditures" ,"per Building (thousand kWh)","per Square...

  7. Table C10. Electricity Consumption and Expenditure Intensities...

    Energy Information Administration (EIA) (indexed site)

    Electricity Consumption and Expenditure Intensities, 1999" ,"Electricity Consumption",,,,,,"Electricity Expenditures" ,"per Building (thousand kWh)","per Square Foot (kWh)","per...

  8. Project Reports for Oneida Tribe of Indians of Wisconsin- 2011 Project

    Energy.gov [DOE]

    This project will fund energy audits of approximately 44 tribally owned buildings operated by the Oneida Tribe, which total 1,031,905 square feet.

  9. Glossary - U.S. Energy Information Administration (EIA)

    Energy Information Administration (EIA) (indexed site)

    consumption Consumption: See Energy consumption. Consumption per square foot: The aggregate ratio of total consumption for a particular set of buildings to the total floorspace of ...

  10. Federal Buildings Supplemental Survey 1993

    Energy Information Administration (EIA) (indexed site)

    4. Energy Conservation Features in FBSS Building in Federal Region 3, Number of Buildings and Floorspace, 1993 Total Floorspace Number of Buildings (thousand square feet) Any Any...

  11. c15.xls

    Energy Information Administration (EIA) (indexed site)

    25th Percentile Median 75th Percentile per Building (thousand dollars) per Square Foot (dollars) per Thousand Cubic Feet (dollars) All Buildings ......

  12. ,"Natural Gas Consumption",,,"Natural Gas Expenditures"

    Energy Information Administration (EIA) (indexed site)

    Census Division, 1999" ,"Natural Gas Consumption",,,"Natural Gas Expenditures" ,"per Building (thousand cubic feet)","per Square Foot (cubic feet)","per Worker (thousand cubic...

  13. Federal Buildings Supplemental Survey 1993

    Energy Information Administration (EIA) (indexed site)

    1993 Natural Gas Consumption Natural Gas Expenditures Distribution of per per per per Building-Level Intensities Total Building Square Worker per per Thousand (cubic feetsquare...

  14. Major Fuels","Electricity","Natural Gas","Fuel Oil","District...

    Energy Information Administration (EIA) (indexed site)

    (million square feet)","Total of Major Fuels","Electricity","Natural Gas","Fuel Oil","District Heat" "All Buildings ...",4657,67338,81552,66424,10...

  15. Notice of Intent to Investigate

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    , 2015 Mr. Bobby Smith Project Manager Separations Process Research Unit Disposition ... James Square Niskayuna, New York 12309 Dear Mr. Smith: This letter serves as notification ...

  16. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    must be developed and applied for fulfillingmore the prediction analysis of solid waste generation ... statistical least-squares regression methods are unable to handle ...

  17. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... To obtain satisfactory kinetic parameters, we employed Kissinger's method combined with least-squares analysis. The power-law kinetics with variable reaction order sufficed for ...

  18. Hanford Speakers Bureau

    Frequently Asked Questions - Hanford...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    of the topics covered by the Hanford Speakers Bureau? The presentation covers various strategies for cleaning up the 586 square miles Hanford Site. Speakers can provide an...

  19. Comparative X-ray Standing Wave Analysis of Metal-Phosphonate...

    Office of Scientific and Technical Information (OSTI)

    Title: Comparative X-ray Standing Wave Analysis of Metal-Phosphonate Multilayer Films of Dodecane and Porphyrin Molecular Square The nanoscale structures of multilayer ...

  20. ,"Fuel Oil Consumption",,,"Fuel Oil Expenditures"

    Energy Information Administration (EIA) (indexed site)

    4. Fuel Oil Consumption and Expenditure Intensities for Non-Mall Buildings, 2003" ,"Fuel Oil Consumption",,,"Fuel Oil Expenditures" ,"per Building (gallons)","per Square Foot...

  1. ,"Fuel Oil Consumption",,,"Fuel Oil Expenditures"

    Energy Information Administration (EIA) (indexed site)

    2. Fuel Oil Consumption and Expenditure Intensities, 1999" ,"Fuel Oil Consumption",,,"Fuel Oil Expenditures" ,"per Building (gallons)","per Square Foot (gallons)","per Worker...

  2. ,"Total Fuel Oil Expenditures

    Energy Information Administration (EIA) (indexed site)

    4. Fuel Oil Expenditures by Census Region, 1999" ,"Total Fuel Oil Expenditures (million dollars)",,,,"Fuel Oil Expenditures (dollars)" ,,,,,"per Gallon",,,,"per Square Foot"...

  3. Energy Information Administration - Commercial Energy Consumption...

    Annual Energy Outlook

    Using Electricity (million square feet) Electricity Energy Intensity (kWhsquare foot) New England Middle Atlantic East North Central New England Middle Atlantic East North...

  4. --No Title--

    Annual Energy Outlook

    Natural Gas (million square feet) Natural Gas Energy Intensity (cubic feetsquare foot) New England Middle Atlantic East North Central New England Middle Atlantic East North...

  5. Energy Information Administration - Commercial Energy Consumption...

    Gasoline and Diesel Fuel Update

    Natural Gas (million square feet) Natural Gas Energy Intensity (cubic feetsquare foot) New England Middle Atlantic East North Central New England Middle Atlantic East North...

  6. Resolute Marine Energy Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Resolute Marine Energy Inc Jump to: navigation, search Name: Resolute Marine Energy Inc Address: 3 Post Office Square 3rd floor Place: Massachusetts Country: United States Zip:...

  7. Commercial Buildings Energy Consumption and Expenditures 1992...

    Energy Information Administration (EIA) (indexed site)

    with the national average of 81 thousand Btu per square foot), while buildings using solar energy or passive solar features used the major energy sources more intensively...

  8. Xiaopeng Qu,1 Jonathan B. Boreyko,2...

    Office of Scientific and Technical Information (OSTI)

    ... The micropillars shown in Fig. 3(a) were lithographically etched in a silicon substrate using cryogenic reactive ion etching at -110C (Oxford Plasmalab 100). The squarely ...

  9. BuildSmart NY Innovators Summit Offers Sneak Peek at Better Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    is approximately 205 million square feet of real estate, including universities, prisons, mental health hospitals, office buildings, and facilities that house its trains, buses,...

  10. The miniCLEAN single-phase noble liquid dark mater experiment...

    Office of Scientific and Technical Information (OSTI)

    provide a unique test of the expected A squared dependence of the WIMP interaction rate. ... Language: English Subject: 70 PLASMA PHYSICS AND FUSION TECHNOLOGY; ARGON; DESIGN; ...

  11. Table 3a. Total Natural Gas Consumption per Effective Occupied...

    Gasoline and Diesel Fuel Update

    3a. Natural Gas Consumption per Sq Ft Table 3a. Total Natural Gas Consumption per Effective Occupied Square Foot, 1992 Building Characteristics All Buildings Using Natural Gas...

  12. Renewable Energy Technical Potential Toolkit | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    energy access universal? International Energy Agency Technical report Poor People's Energy Outlook 2010 Practical Action Technical report Solar design T-square Brian White...

  13. Concord Comprehensive Sustainable Energy Committee | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Concord Comprehensive Sustainable Energy Committee Jump to: navigation, search Name: Concord Comprehensive Sustainable Energy Committee Address: Monument Square Place: Concord, MA...

  14. Autonomous Correction of Sensor Data Applied to Building Technologies...

    Office of Scientific and Technical Information (OSTI)

    Research Org: Oak Ridge National Laboratory (ORNL) Sponsoring Org: ORNL LDRD Director's ... Subject: Sensor data validation; statistical processing methods; least squares; maximum ...

  15. --No Title--

    Annual Energy Outlook

    4. Natural Gas Consumption and Expenditure Intensities for Non-Mall Buildings, 2003 Natural Gas Consumption Natural Gas Expenditures per Building (thousand cubic feet) per Square...

  16. DESIGNATION SURVEY ADDENDUM REPORT II COMBUSTION ENGINEERING...

    Office of Legacy Management (LM)

    ... Atomic Power Laboratory kilogram kilometer meter square meter minimum detectable concentration sodium iodide National Institute of Standards and Technology Nuclear Regulatory ...

  17. set5.pdf

    Energy Information Administration (EIA) (indexed site)

    ... Table B18. Energy Sources, Floorspace, 1999 Total Floorspace (million square feet) All Buildings All Buildings Using Any Energy Source Energy Sources Used (more than one may apply) ...

  18. allbc.pdf

    Energy Information Administration (EIA) (indexed site)

    Energy Information Administration 1999 Commercial Buildings Energy Consumption Survey: Detailed Tables Contents ii All Buildings (thousand) Total Floorspace (million square feet) ...

  19. --No Title--

    Energy Information Administration (EIA) (indexed site)

    3. Cooking Energy Sources, Number of Buildings and Floorspace for Non-Mall Buildings, 2003 Number of Buildings (thousand) Total Floorspace (million square feet) All Build- ings*...

  20. European Bank for Reconstruction and Development (EBRD) | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Development Address: EBRD One Exchange Square Place: London, United Kingdom Year Founded: 1991 Phone Number: 44 20 7338 6000 Website: www.ebrd.com Coordinates: 51.5760683,...

  1. The Departments real property assets are vital to the accomplishment...

    Energy.gov [DOE] (indexed site)

    ... Points 1 Program specific mission dependency ACI targets and ACI targets are ... Energy Intensity - Energy ConsumptionSquare Feet (BTUSF). EISA of 2007 Sec 431 and EO ...

  2. Energy Information Administration - Commercial Energy Consumption...

    Annual Energy Outlook

    4A. Electricity Consumption and Expenditure Intensities for All Buildings, 2003 Electricity Consumption Electricity Expenditures per Building (thousand kWh) per Square Foot (kWh)...

  3. Electrochemical Branched-DNA Assay for Polymerase Chain Reaction...

    Office of Scientific and Technical Information (OSTI)

    square-wave voltammetric (SWV) analysis of the electroactive enzymatic product in the presence of 1-napthyl-phosphate. The specificity and sensitivity of assay enabled direct ...

  4. --No Title--

    Energy Information Administration (EIA) (indexed site)

    8. Occupancy of Nongovernment-Owned and Government-Owned Buildings, Floorspace for Non-Mall Buildings, 2003 Total Floorspace (million square feet) All Buildings*...

  5. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    legislation mandating the use of high performance green building standards in new state construction. The standard requires that new buildings larger than 15,000 square feet...

  6. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    green building standards in new state construction. The standard requires that new buildings larger than 15,000 square feet constructed for the sole use of state entities...

  7. Table 4b. Relative Standard Errors for Total Fuel Oil Consumption...

    Gasoline and Diesel Fuel Update

    4b. Relative Standard Errors for Total Fuel Oil Consumption per Effective Occupied Square Foot, 1992 Building Characteristics All Buildings Using Fuel Oil (thousand) Total Fuel Oil...

  8. Energy Information Administration - Commercial Energy Consumption...

    Gasoline and Diesel Fuel Update

    4A. Fuel Oil Consumption and Expenditure Intensities for All Buildings, 2003 Fuel Oil Consumption Fuel Oil Expenditures per Building (gallons) per Square Foot (gallons) per...

  9. --No Title--

    Gasoline and Diesel Fuel Update

    4. Fuel Oil Consumption and Expenditure Intensities for Non-Mall Buildings, 2003 Fuel Oil Consumption Fuel Oil Expenditures per Building (gallons) per Square Foot (gallons) per...

  10. Energy Department Recognizes Arizona’s Dysart Unified School District for Leadership in Better Buildings Challenge

    Energy.gov [DOE]

    School district commits to 20 percent energy savings over 10 years, spanning more than three million square feet of building space.

  11. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    The dosimetric parameters Sc, Sp and TPR vary depending on radio, the transmission effect of the MLC, inverse square law and dose profile are used for the calculation....

  12. --No Title--

    Gasoline and Diesel Fuel Update

    2. Water Heating Equipment, Number of Buildings and Floorspace for Non-Mall Buildings, 2003 Number of Buildings (thousand) Total Floorspace (million square feet) All Build- ings*...

  13. --No Title--

    Gasoline and Diesel Fuel Update

    2. Water-Heating Energy Sources, Floorspace for Non-Mall Buildings, 2003 Total Floorspace (million square feet) All Buildings* Buildings with Water Heating Water-Heating Energy...

  14. Energy Department Recognizes Cities of Beaverton and Hillsboro...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    As Better Buildings Challenge partners, they have committed to reduce the energy use of ten million square feet of building space, including libraries, schools and other public ...

  15. OSTI, US Dept of Energy Office of Scientific and Technical Information...

    Office of Scientific and Technical Information (OSTI)

    ... Affiliations may be place in square brackets after each author's name. DOE, John National Tech, Inc.; Smith, Nancy Brookhaven National Laboratory 7 Report...

    ... Affiliations may be place in square brackets after each author's name. DOE, John National Tech, Inc.; Smith, Nancy Brookhaven National Laboratory 7 Report...

  16. Table 2b. Relative Standard Errors for Electricity Consumption...

    Energy Information Administration (EIA) (indexed site)

    2b. Relative Standard Errors for Electricity Table 2b. Relative Standard Errors for Electricity Consumption and Electricity Intensities, per Square Foot, Specific to Occupied and...

  17. Table 6b. Relative Standard Errors for Total Electricity Consumption...

    Energy Information Administration (EIA) (indexed site)

    b. Relative Standard Errors for Total Electricity Consumption per Effective Occupied Square Foot, 1992 Building Characteristics All Buildings Using Electricity (thousand) Total...

  18. Compare Activities by Number of Computers

    Energy Information Administration (EIA) (indexed site)

    of Computers Office buildings contained the most computers per square foot, followed by education and outpatient health care buildings. Education buildings were the only type...

  19. Northampton County, North Carolina: Energy Resources | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    North Carolina Conway, North Carolina Garysburg, North Carolina Gaston, North Carolina Jackson, North Carolina Lasker, North Carolina Rich Square, North Carolina Seaboard, North...

  20. b13.pdf

    Energy Information Administration (EIA) (indexed site)

    ... Total Floorspace (million square feet) All Buildings Energy Information Administration 1999 Commercial Buildings Energy Consumption Survey: Building Characteristics Tables 49 All ...