National Library of Energy BETA

Sample records for tools land reclamation

  1. Mined land reclamation in Wisconsin since 1973

    SciTech Connect

    Hunt, T.C.

    1989-01-01

    Reclamation has long been recognized as an essential action necessary to mitigate the degradation of land caused by mining activities. But, it is only within the past several decades that reclamation has become an integral component of the mineral extraction process. While the Metallic Mining Reclamation Act (MMRA) was passed in 1973, Wisconsin is yet to enact comprehensive state-wide reclamation requirements for mining other than metallic minerals and the code for metallic mining has yet to establish procedures and standards for reclamation success, specifically revegetation and postmining land use. This study integrates several interdisciplinary methodologies including a history of reclamation; an inventory and status report of mined lands; a critique and comparison of existing reclamation policy with previous state and current federal reclamation policies; in-field case studies of revegetation parameters, procedures, and performance standards; and an economic analysis of reclamation technology. This study makes three major recommendations: (1) The metallic mining code should be amended to establish vegetation parameters, measuring methods, and performance standards for revegetation success similar to those contained in the federal Surface Mining Control and Reclamation Act (SMCRA); (2) The metallic mining code should be amended to resolve semantic loopholes by clearly defining the endpoints of terms such as restoration, reclamation, and rehabilitation and by utilizing the reclamation continuum as a planning tool for determining acceptable postmining land use alternatives; and (3) Mandatory statewide nonmetallic legislation should be enacted to strengthen the mineral resource management program in Wisconsin by systematically and uniformly regulating the mining and reclamation of nonmetallic minerals, the state's most important mineral resource.

  2. Mined Land Reclamation on DOE's Uranium Lease Tracts, Southwestern...

    Office of Environmental Management (EM)

    Mined Land Reclamation on DOE's Uranium Lease Tracts, Southwestern Colorado Mined Land Reclamation on DOE's Uranium Lease Tracts, Southwestern Colorado Mined Land Reclamation on...

  3. Land reclamation beautifies coal mines

    SciTech Connect

    Coblentz, B.

    2009-07-15

    The article explains how the Mississippi Agricultural and Forestry Experiments station, MAFES, has helped prepare land exploited by strip mining at North American Coal Corporation's Red Hills Mine. The 5,800 acre lignite mine is over 200 ft deep and uncovers six layers of coal. About 100 acres of land a year is mined and reclaimed, mostly as pine plantations. 5 photos.

  4. Illinois abandoned mined lands reclamation program: a progress report

    SciTech Connect

    Hickmann, T.J.; Jenkusky, S.M.; Massie, S.

    1985-12-01

    The Illinois Abandoned Mined Lands Reclamation Council (AMLRC), created in 1975, is responsible for the abatement of hazardous and environmental problems associated with pre-law abandoned coal mines throughout the State. The availability of federal funds for reclamation, through passage of the Surface Mining Control and Reclamation Act of 1977 (SMCRA), greatly expanded the program. With funds provided through early cooperative agreements and current annual grants from the federal Office of Surface Mining (OSM), the State has reclaimed, or is currently reclaiming, 182 mine sites and has assisted OSM in the abatement of 67 emergency situations. This paper reviews the progress made by the AMLRC in dealing with the State's abandoned mine problems. Specifically, the numbers and types of problem sites reclaimed annually, their costs, and reclamation methods are identified. Progress of the program relative to the entire State's abandoned mine problems is reviewed. The effects of other reclamation factors, such as natural revegetation, remaining privately-funded reclamation, and secondary carbon recovery, on the overall scope of the State's program are also examined. General comments are made concerning grant preparation, State-OSM cooperation and AML-Inventory control. Selected reclamation projects and techniques are also discussed. 11 references, 3 tables.

  5. Surface and groundwater management in surface mined-land reclamation

    SciTech Connect

    Evoy, B.; Holland, M.

    1990-06-01

    This report provides information on surface water and groundwater management for use in the mined-land reclamation planning process in California. Mined-land reclamation, as defined by the California Surface Mining and Reclamation Act, is the combination of land treatments which prevent or minimize water degradation, air pollution, damage to aquatic or wildlife habitat, and erosion resulting from a surface mining operation. Surface water and groundwater management play an integral role in nearly every reclamation plan. Groundwater and surface water runoff (both onto and off of the site) must often be evaluated (1) to design flooding and erosion protection measures such as drainage channels, levees, culverts, or riprap; (2) to prepare and carry out a successful revegetation program; (3) to design stable final slopes; (4) to maximize potential available water for the operation and reclamation stages; (5) to prevent the discharge of contaminants from mine processes or from mined areas; and (6) to limit long-term leachate formation and movement from tailings, pit, or waste rock disposal areas. This report is a guide for mine operators, local government, planners, and plan reviewers.

  6. Land use and value after reclamation

    SciTech Connect

    Phelps, W.R.

    1998-12-31

    This presentation discusses the process of analyzing the size and condition of producing land parcels concerning management and income relationships, tract location, and soil and water conservation structures. It reviews production schemes for crops such as corn, soybeans, wheat, alfalfa hay, and warm season grasses, as well as use for recreation. Management of tenants and leases is discussed concerning evaluation of crop share leases, cash renting, custom farming, and tenant selection. Factors involving subsidence due to underground mining by longwall or room and pillar extraction are discussed. Issues related to planning for and management of taxes, long-term improvements, and other land costs are presented.

  7. Reclamation planning for abandoned mining subsidence lands in eastern China --- A case study

    SciTech Connect

    Zhenqi Hu; Hehe Gu

    1995-09-01

    China has a long history of coal mining and more than 96% of coal output is taken from underground mines each year. With the excavation of coal from underground, severe subsidence often results, which produces many subsidence lands. Since the Chinese government enacted a reclamation stipulation in 1989, many abandoned mining subsidence lands were produced before 1989. Therefore, reclamation of abandoned subsidence lands has become the focus of research activities in our country. This paper explores the principle and methods of reclamation planning for abandoned mining subsidence lands and presents a case study in eastern China. A 373 ha of abandoned mining subsidence land in Anhui province was selected as an experiment site. Since China is a developing country and land shortage is severe in this area, the high economic benefits from the reclaimed land was the final reclamation goal. Based on the topography of subsidence lands --- some parts of the abandoned lands were wetland or lake-like troughs, restoring farmlands and fishponds were chosen as post-reclamation land uses. The elevation of reclaimed lands was the key for restoring farmland successfully because of the high underground water level in this area, and the optimum fishpond size and side-slope design were the keys to reach high reclamation income. The HDP (Hydraulic Dredge Pump) reclamation technique was used for restoring farmland and creating fishpond. A farming and aquaculture plan for high economic benefits was also designed. This project will make farmers, who own the lands, richer through reclamation.

  8. Renewable Energy Assessment of Bureau of Reclamation Land and Facilities Using Geographic Information Systems

    SciTech Connect

    Heimiller, D.; Haase, S.; Melius, J.

    2013-05-01

    This report summarizes results of geographic information system screening for solar and wind potential at select Bureau of Reclamation lands in the western United States. The study included both utility-scale and facility-scale potential. This study supplements information in the report titled Renewable Energy Assessment for the Bureau of Reclamation: Final Report.

  9. Economic feasibility analysis of water-harvesting techniques for mined-land reclamation

    SciTech Connect

    Nieves, L.A.; Marti, M.H.

    1981-07-01

    A water harvesting, agricultural production system, field tested as a means of reclaiming strip-mined land is described. Though the technical feasibility of the system is becoming increasingly apparent, economic feasibility and legal issues may determine its potential application. The purpose of this study is to explore the economic feasibility of the system and to provide information for use in assessing whether further investigation of water harvesting reclamation techniques is warranted. The economic feasibility of the PNL reclamation system hinges on whether its net benefits exceed those of conventional reclamation. This preliminary feasibility study assesses the net private benefits of each system using data for the Peabody Coal Company's Kayenta mine on the Black Mesa in Arizona. To compare the alternative reclamation systems, the present value of direct net benefits (income minus production and reclamation costs) is calculated for grazing (conventional reclamation) or for cropping (PNL reclamation). Three of the PNL system slope treatments have lower estimated total costs than conventional reclamation. The difference is $3895/acre for compacted slope, $3025/acre for salt-compacted slope and $2310/acre for crop-on-slope. These differences constitute a substantial cost advantage for the system on the basis of the present value of land reclamation and maintenance costs. The system also has advantages based on the estimated value of agricultural production capacity. Even the lowest yield levels considered for alfalfa, corn, and pinto beans had higher net present values than grazing.

  10. Title 43 CFR 429 Use of Bureau of Reclamation Land, Facilities...

    OpenEI (Open Energy Information) [EERE & EIA]

    29 Use of Bureau of Reclamation Land, Facilities, and Waterbodies Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Federal RegulationFederal...

  11. Cost analysis of aerial photographic and satellite imagery for monitoring mined land reclamation

    SciTech Connect

    Green, J.E.; Buschur, J.P.

    1980-12-01

    Five sections of the Surface Mining Control and Reclamation Act of 1977 require information that is easily and efficiently obtainable by aerial photographic and remote sensing methods. Most states in which mining is important and to which the Act most specifically applies, maintain or have available to them aerial photographic or remotely sensed information of the type required. This information could be used to meet the requirements of the Act which call for monitoring reclamation progress, identifying land areas unsuitable for mining and determining land use prior to mining to name a few examples. At the regional scale, LANDSAT imagery of a scale of 1:250,000 provides a good combination of aerial coverage and detail for regional problem solving. At the local scale, such coverage as is provided by the Agricultural Stabilization and Conservation Service through their aerial observation method of compliance technique can supply local, detailed information to meet site specific needs.

  12. ENHANCEMENT OF TERRESTRIAL CARBON SINKS THROUGH RECLAMATION OF ABANDONED MINE LANDS IN THE APPALACHIAN REGION

    SciTech Connect

    Gary D. Kronrad

    2002-12-01

    The U.S.D.I. Office of Surface Mining (OSM) estimates that there are approximately 1 million acres of abandoned mine land (AML) in the Appalachian region. AML lands are classified as areas that were inadequately reclaimed or were left unreclaimed prior to the passage of the 1977 Surface Mining Control and Reclamation Act, and where no federal or state laws require any further reclamation responsibility to any company or individual. Reclamation and afforestation of these sites have the potential to provide landowners with cyclical timber revenues, generate environmental benefits to surrounding communities, and sequester carbon in the terrestrial ecosystem. Through a memorandum of understanding, the OSM and the U.S. Department of Energy (DOE) have decided to investigate reclaiming and afforesting these lands for the purpose of mitigating the negative effects of anthropogenic carbon dioxide in the atmosphere. This study determined the carbon sequestration potential of northern red oak (Quercus rubra L.), one of the major reclamation as well as commercial species, planted on West Virginia AML sites. Analyses were conducted to (1) calculate the total number of tons that can be stored, (2) determine the cost per ton to store carbon, and (3) calculate the profitability of managing these forests for timber production alone and for timber production and carbon storage together. The Forest Management Optimizer (FORMOP) was used to simulate growth data on diameter, height, and volume for northern red oak. Variables used in this study included site indices ranging from 40 to 80 (base age 50), thinning frequencies of 0, 1, and 2, thinning percentages of 20, 25, 30, 35, and 40, and a maximum rotation length of 100 years. Real alternative rates of return (ARR) ranging from 0.5% to 12.5% were chosen for the economic analyses. A total of 769,248 thinning and harvesting combinations, net present worths, and soil expectation values were calculated in this study. Results indicate that

  13. Abandoned mine lands: a mid-course review of the national reclamation program for coal. Final report

    SciTech Connect

    Not Available

    1986-11-01

    The Committee on Abandoned Mine Lands (CAML) analyzed how the U.S. Department of the Interior's (DOI) Office of Surface Mining (OSM) has and is administering the Title IV (Abandoned Mine Lands) Program of the Surface Mining Control and Reclamation Act of 1977. In the course of focusing on the effectiveness of the program, the Committee evaluated the program not only in terms of its probable accomplishments over its fifteen-year life, between 1977 and 1992, when the program statutorily ends, but also the magnitude and nature of the AML problems remaining to be remedied in the post-1992 period, if Congress decides to extend it. The Committee made nineteen recommendations about how OSM could improve the AML program's current effectiveness as well as prepare to assist Congress in reaching a decision to terminate or extend the program. Over the fifteen-year life of the program, some $3.3 billion will have been spent.

  14. Demonstrating a Market-Based Approach to the Reclamation of Mined Lands in West Virginia

    SciTech Connect

    John W. Goodrich-Mahoney; Paul Ziemkiewicz

    2006-07-19

    This is the third quarter progress report of Phase II of a three-phase project to develop and evaluate the efficacy of developing multiple environmental market trading credits on a partially reclaimed surface mined site near Valley Point, Preston County, WV. Construction of the passive acid mine drainage (AMD) treatment system was completed but several modifications from the original design had to be made following the land survey and during construction to compensate for unforeseen circumstances. We continued to collect baseline quality data from the Conner Run AMD seeps to confirm the conceptual and final design for the passive AMD treatment system.

  15. Demonstrating a Market-Based Approach to the Reclamation of Mined Lands in West Virginia

    SciTech Connect

    Goodrich-Mahoney, John; Donnelly, Ellen

    2009-12-31

    This project demonstrated that developing environmental credits on private land—including abandoned mined lands—is dependent on a number of factors, some of them beyond the control of the project team. In this project, acid mine drainage (AMD) was successfully remediated through the construction of a passive AMD treatment system. Extensive water quality sampling both before and after the installation of the passive AMD treatment system showed that the system achieved removal efficiencies and pollutant loading reductions for acidity, iron, aluminum and manganese that were consistent with systems of similar size and design. The success of the passive AMD treatment system should have resulted in water credits if the project had not been terminated. Developing carbon sequestration credits, however, was much more complex and was not achieved in this project. The primary challenge that the project team encountered in meeting the full project objectives was the unsuccessful attempt to have the landowner sign a conservation easement for his property. This would have allowed the project team to clear and reforest the site, monitor the progress of the newly planted trees, and eventually realize carbon sequestration credits once the forest was mature. The delays caused by the lack of a conservation easement, as well as other factors, eventually resulted in the reforestation portion of the project being cancelled. The information in this report will help the public make more informed decisions regarding the potential of using water and carbon, and other credits to support the remediation of minded lands through out the United States. The hope is that by using credits that more mined lands with be remediated.

  16. Reclamation of acidic, denuded copper basin land: Revegetation performance of phosphate rock vs other nutrient sources

    SciTech Connect

    Soileau, J.M.; Sikora, F.J.; Maddox, J.J.; Kelsoe, J.J.

    1996-12-31

    Open pit smelting of Copper ore about 100 years ago resulted in approximately 9,300 ha of severely eroded, very acidic (pH 4.0 to 5.0) soils at Copper Basin, Tennessee. Along with other essential nutrients, phosphorus (P) amendments are critical for long-term productivity and sustainability of vegetation on this depleted soil. A field study was conducted (1992-1995) to compare revegetation from surface-applied North Carolina phosphate rock (PR) and triple superphosphate (TSP) at 20, 59, and 295 kg P ha{sup -1}, and to determine benefits of starter NPK tree tablets. The experimental design consisted of 7.3 x 9.1 m replicated plots, each planted to 20 loblolly pine seedlings and aerially seeded with a mixture of grasses and legumes. Tree survivability was high from all treatments. Through the third year, tree height and diameter increased with increasing P to 59 kg P ha without fertilizer tablets. There were no pine growth differences between PR and TSP. Weeping lovegrass has been the dominant cover crop through 1995, with increased stimulation to tree tablets and surface P. Tall fescue (KY 31), sericea lespedeza, and black locust responded more to PR than to TSP. Surface soil pH increased, and 0.01 M SrCl{sub 2} extractable Al decreased, with increasing rate of PR. For future loblolly pine plantings in the Copper Basin, this study suggests there is no benefit to applying both tree tablets and surface P at rates above 59 kg P ha{sup -1}. For reclaiming land with high acidity and low P fertility, PR has significant benefits. In reclaiming steep, gullied land, there is great potential for aerial application of PR and/or pelletized liming agents.

  17. Proceedings of the international land reclamation and mine drainage conference and third international conference on the abatement of acidic drainage. Volume 4: Abandoned mine lands and topical issues -- SP 06D-94

    SciTech Connect

    Not Available

    1994-01-01

    Volume 4 of these proceedings is divided into the following sections: Subsidence--Reclamation, characterization (6 papers); Subsidence--Structural response (7); Abandoned mine land studies (6); Mine Hydrology--Topical issues (4); Mine waste--Topical issues (6); Policy issues (6); Miscellaneous poster session (14); and Abstracts (17). 53 papers dealing with or applicable to coal mining have been processed separately for inclusion on the data base.

  18. H. R. 4804: A bill to amend titles I, II, IV and V of the Surface Mining Control and Reclamation Act of 1977, and to add a new title X, to encourage the remining and reclamation of abandoned mined lands by active mining operations, and for other purposes. Introduced in the House of Representatives, One Hundredth Congress, Second Session, June 14, 1988

    SciTech Connect

    Not Available

    1988-01-01

    Surface coal mining operations can be effective in the reclamation of abandoned mined lands and are being encouraged by the amendments to the existing Surface Mining Control and Reclamation Act of 1977. The new section X - Remining spells out the authority of the Secretary of the Interior to enter into agreements with mining companies to use excess spoil from an active surface mine to reclaim an abandoned site, to develop a bond guarantee program whereby the operators may be compensated with reclamation bond credits for up to 80% of the reclamation costs incurred, and to make funds available on a matching basis to states or tribes to collect certain geologic and hydrologic data for watersheds or regions adversely affected by past coal mining abuses for the use of regulatory authorities to assist applicants for surface mining permits within such areas.

  19. Surface mine regulations complicate reclamation

    SciTech Connect

    Seltz-Patrash, A.

    1980-09-01

    The Surface Mining Control and Reclamation Act of 1977 is a landmark environmental law intended to protect U.S. lands from stripmining effects. However, coal mine operators claim that some SMCRA regulations are misguidedcosting time and money, but yielding no substantial environmental benefit. Unlike other environmental acts, SMCRA details specifically the goals of reclamation and the methods that must be implemented to meet these goals. Coal industry representatives believe that this discourages innovation, promotes inefficiency by ignoring regional differences among sites, and results in unnecessary expense to the industry. Reclamation practices and progress among western coal mining companies are evaluated. (1 map, 5 photos)

  20. Metro Wastewater Reclamation District Biomass Facility | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Wastewater Reclamation District Biomass Facility Jump to: navigation, search Name Metro Wastewater Reclamation District Biomass Facility Facility Metro Wastewater Reclamation...

  1. Geotechnical considerations in surface mine reclamation

    SciTech Connect

    Kuhn, A.K.

    1999-07-01

    Most attention in surface mine reclamation is given to agronomic soils and revegetation, but reclamation success depends on the geotechnical characteristics of the underlying earth. If the soil and rock that underline the surface are not stable, surface treatments lack the dependable foundation needed for them to succeed. Reclamation practioners need to understand those geotechnical considerations--material properties, structure, and processes--that affect stability. properties of rock and soil are altered by mining, and those altered materials together with water and processing waste form often-complex mixtures of materials that must be stabilized in reclamation. Surface mining alters existing landforms and creates new ones such as pit walls, spoil and waste rock piles, tailings impoundments, and earthfills. those structures need to be constructed or stabilized so that they can endure and support successful reclamation. processes that affect material properties and landforms include mechanical breakage, accelerated weathering, erosion, and mass movements. Mechanical breakage and the resulting accelerated weathering combine to change material properties, usually expressed as degraded strength, that can lead to instability of landforms. Erosion, especially that related to extreme storm events, and mass movements in the form of slop failures are the most problematic processes that must be taken into account in reclaiming mined lands. These geotechnical considerations are essential in successful reclamation, and practioners who overlook them may find their work literally sliding down a slippery slope.

  2. H. R. 4053: A Bill to amend the Surface Mining Control and Reclamation Act of 1977 to provide for the remining of certain abandoned coal mine lands. Introduced in the House of Representatives, One Hundredth First Congress, Second Session, February 21, 1990

    SciTech Connect

    Not Available

    1990-01-01

    The bill would amend the Surface Mining Control and Reclamation Act of 1977 to provide for the remining of certain abandoned coal mine lands. The bill describes definitions; state remining insurance programs; state self-sustaining remining insurance fund; penalties and enforcement; special rules applicable to remining operations; and abandoned coal refuse and disposal piles.

  3. Setting the course for the Surface Mining Control and Reclamation Act of 1977

    SciTech Connect

    Beck, R.E.

    1995-12-31

    The Surface Mining Control and Reclamation Act of 1977 focuses on ensuring reclamation of the land after mining by restoring land affected to a condition capable of supporting prior uses and sets up a program for reclaiming abandoned mined land to be financed by a tax on coal produced. This article discusses the landmark legal decisions which represent major efforts to limit the federal role in the Surface Mining Control and Reclamation Act of 1977 through the Commerce Clause, the Tenth Amendment, and statutory interpretation.

  4. Federal oversight of alternative bond systems under SMCRA (Surface Mining Control and Reclamation Act)

    SciTech Connect

    Beier, A.E.; McElfish, J.M. Jr.

    1989-01-01

    The 1977 Surface Mining Control and Reclamation Act (SMCRA) requires mine operators to post reclamation bonds before mining begins. The Federal Office of Surface Mining Reclamation and Enforcement (OSMRE) has approved alternative bond systems in seven states. These systems, rather than requiring bond amounts at the full cost of reclamation, require operators to submit only a flat rate, acreage specific bond. Additional reclamation costs should be covered by a supplemental fund composed generally of permit fees, taxes, or penalties. In many cases, alternative bond systems fail to ensure that funds will be available to reclaim coal mined land in the event of operator default, as required by SMCRA. OSMRE needs to take a more active role in oversight of existing state alternative bond systems to ensure that reclamation occurs.

  5. H. R. 2095: Abandoned Mine Reclamation Act of 1989. Introduced in the Senate of the United States, One Hundredth First Congress, First Session, October 25, 1989

    SciTech Connect

    Not Available

    1989-01-01

    This bill would amend the Surface Mining Control and Reclamation Act of 1977 to reauthorize the collection of reclamation fees. This bill explains the additions to the Act relating to collection of interest on that portion of the fund not currently needed; the allocation of funds; the fund objectives; eligible lands and waters; state reclamation programs; voids and tunnels; emergency program; certification; and abandoned minerals and mineral materials mine reclamation fund.

  6. New Technologies to Reclaim Arid Lands User's Manual

    SciTech Connect

    W. K. Ostler

    2002-10-01

    establishing project objectives, scheduling, budgeting, and selecting cost-effective techniques. Reclamation techniques include sections describing: (1) erosion control (physical, chemical, and biological), (2) site preparation, (3) soil amendments, (4) seeding, (5) planting, (6) grazing and weed control, (7) mulching, (8) irrigation, and (9) site protection. Each section states the objectives of the technique, the principles, an in-depth look at the techniques, and any special considerations as it relates to DoD or DOE lands. The need for monitoring and remediation is described to guide users in monitoring reclamation efforts to evaluate their cost-effectiveness. Costs are provided for the proposed techniques for the major deserts of the southwestern U.S. showing the average and range of costs. A set of decision tools are provided in the form of a flow diagram and table to guide users in selecting effective reclamation techniques to achieve mitigation objectives. Recommendations are provided to help summarize key reclamation principles and to assist users in developing a successful program that contributes to sustainable uses of DoD and DOE lands. The users manual is helpful to managers in communicating to installation management the needs and consequences of training decisions and the costs required to achieve successful levels of sustainable use. This users manual focuses on the development of new reclamation techniques that have been implemented at the National Training Center at Fort Irwin, California, and are applicable to most arid land reclamation efforts.

  7. Reclamation Project Act of 1939 U.S.C. | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Reclamation Project Act of 1939 U.S.C. Reclamation Project Act of 1939 U.S.C. CITE: 42USCC12 TITLE 43--PUBLIC LANDS CITE: 43USC485a TITLE 43--PUBLIC LANDS CITE: 43USC485b TITLE 43--PUBLIC LANDS CITE: 43USC485c TITLE 43--PUBLIC LANDS CITE: 43USC485d TITLE 43--PUBLIC LANDS CITE: 43USC485e TITLE 43--PUBLIC LANDS CITE: 43USC485f TITLE 43--PUBLIC LANDS CITE: 43USC485g TITLE 43--PUBLIC LANDS CITE: 43USC485h TITLE 43--PUBLIC LANDS CITE: 43USC485i TITLE 43--PUBLIC LANDS CITE: 43USC485j TITLE 43--PUBLIC

  8. Application of a watershed computer model to assess reclaimed landform stability in support of reclamation liability release

    SciTech Connect

    Peterson, M.R.; Zevenbergen, L.W.; Cochran, J.

    1995-09-01

    The Surface Mining Control and Reclamation Act of 1977 (SMCRA) instituted specific requirements for surface coal mine reclamation that included reclamation bonding and tied release of liability to achieving acceptable reclamation standards. Generally, such reclamation standards include successfully revegetating the site, achieving the approved postmine land use and minimizing disturbances to the prevailing hydrologic balance. For western surface coal mines the period of liability continues for a minimum of 10 years commencing with the last year of augmented seeding, fertilizing, irrigation or other work. This paper describes the methods and procedures conducted to evaluate the runoff and sediment yield response from approximately 2,700 acres of reclaimed lands at Peabody Western Coal Company`s (PWCC) Black Mesa Mine located near Kayenta, Arizona. These analyses were conducted in support of an application for liability release submitted to the Office of Surface Mining (OSM) for reclaimed interim land parcels within the 2,700 acres evaluated.

  9. Southside Water Reclamation Plant Biomass Facility | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Water Reclamation Plant Biomass Facility Jump to: navigation, search Name Southside Water Reclamation Plant Biomass Facility Facility Southside Water Reclamation Plant Sector...

  10. Arid land plants: promising new tools for economic development and basic research

    SciTech Connect

    Felker, P.

    1980-01-01

    An overview is presented of arid land plant development stressing products and plant physiological and ecological concepts unique to arid land plants. Integration of new arid land crops into polyculture management systems is suggested utilizing specialized plant functions, e.g., drought resistance, resistance to salinity, ability to fix nitrogen, frost tolerance and capability to produce a cash crop. Impacts on arid land plant productivity on political systems of developing countries are discussed and recommendations are presented for overcoming institutional constraints facing arid land plant development. (MHR)

  11. Reclamation fee on coal production: an example of federal regulatory taxation

    SciTech Connect

    Reese, C.E.

    1983-09-01

    The coal mining reclamation fee is part of the federal government's efforts to regulate the strip mining of coal and to use proceeds from the fee for land use and pollution control problems associated with abandoned mines. Authorized by the 1977 Surface Mining Contol and Reclamation Act rather than the Internal Revenue Code, the exaction is still shown to be both a regulatory and a severance tax. 41 references. (DCK)

  12. BUILDING MATERIALS RECLAMATION PROGRAM

    SciTech Connect

    David C. Weggel; Shen-En Chen; Helene Hilger; Fabien Besnard; Tara Cavalline; Brett Tempest; Adam Alvey; Madeleine Grimmer; Rebecca Turner

    2010-08-31

    This report describes work conducted on the Building Materials Reclamation Program for the period of September 2008 to August 2010. The goals of the project included selecting materials from the local construction and demolition (C&D) waste stream and developing economically viable reprocessing, reuse or recycling schemes to divert them from landfill storage. Educational resources as well as conceptual designs and engineering feasibility demonstrations were provided for various aspects of the work. The project was divided into two distinct phases: Research and Engineering Feasibility and Dissemination. In the Research Phase, a literature review was initiated and data collection commenced, an advisory panel was organized, and research was conducted to evaluate high volume C&D materials for nontraditional use; five materials were selected for more detailed investigations. In the Engineering Feasibility and Dissemination Phase, a conceptual study for a regional (Mecklenburg and surrounding counties) collection and sorting facility was performed, an engineering feasibility project to demonstrate the viability of recycling or reuse schemes was created, the literature review was extended and completed, and pedagogical materials were developed. Over the two-year duration of the project, all of the tasks and subtasks outlined in the original project proposal have been completed. The Final Progress Report, which briefly describes actual project accomplishments versus the tasks/subtasks of the original project proposal, is included in Appendix A of this report. This report describes the scientific/technical aspects (hypotheses, research/testing, and findings) of six subprojects that investigated five common C&D materials. Table 1 summarizes the six subprojects, including the C&D material studied and the graduate student and the faculty advisor on each subproject.

  13. Mining and Reclamation Technology Symposium

    SciTech Connect

    None Available

    1999-06-24

    The Mining and Reclamation Technology Symposium was commissioned by the Mountaintop Removal Mining/Valley Fill Environmental Impact Statement (EIS) Interagency Steering Committee as an educational forum for the members of the regulatory community who will participate in the development of the EIS. The Steering Committee sought a balanced audience to ensure the input to the regulatory community reflected the range of perspectives on this complicated and emotional issue. The focus of this symposium is on mining and reclamation technology alternatives, which is one of eleven topics scheduled for review to support development of the EIS. Others include hydrologic, environmental, ecological, and socio-economic issues.

  14. Bureau of Reclamation | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    enough electricity to serve 3.5 million homes. Today, Reclamation is a contemporary water management agency with a Strategic Plan outlining numerous programs, initiatives and...

  15. EIS-0370: Bureau of Reclamation, Interior, Notice of Availability...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bureau of Reclamation, Interior, Notice of Availability of the Final Environmental Impact Statement EIS-0370: Bureau of Reclamation, Interior, Notice of Availability of the Final...

  16. Wastewater Reclamation and Biofuel Production Using Algae | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Wastewater Reclamation and Biofuel Production Using Algae Wastewater Reclamation and Biofuel Production Using Algae Breakout Session 2-A: The Future of Algae-Based Biofuels ...

  17. How reclamation tests mechanical governors

    SciTech Connect

    Agee, J.C.; Girgis, G.K.; Cline, R.

    1996-08-01

    The Bureau of Reclamation has developed its own equipment for testing mechanical-hydraulic governors for hydroelectric generators. The device, called a Permanent Magnet Generator (PMG) Simulator, generates a three-phase voltage that will drive the governor ballhead motor at variable speed. Utilizing this equipment, most traditional governor tests can be completed with the generating unit dewatered. In addition, frequency response testing and other detailed analytical tests can be performed to validate governor models. This article describes the development and design of the equipment, and it also discusses its usage in a case study of events at Glen Canyon Dam.

  18. Surface coal mining operations in two Oklahoma Counties raise questions about prime farmland reclamation and bond adequacy

    SciTech Connect

    Not Available

    1985-08-08

    The Surface Mining Control and Reclamation Act of 1977 allows prime farmland to be mined but requires the coal operator to reclaim it according to special reclamation standards. To be considered prime farmland, the soil must meet the Secretary of Agriculture's definition of prime soil and have historically been used for intensive agricultural purposes. In Oklahoma, the historical-use provision has generally been applied to lands that have been used for cropland for 5 of the preceding 10 years. GAO's review of mining activities in two Oklahoma counties showed that the land comprising 54 of the 58 mine permits issued since the act's passage contained some prime soil. None, however, required reclamation to prime farmland standards because landowners signed letters stating that the land had not been farmed for crops for five of the preceding 10 years. GAO also found that numerous sites in the two counties were abandoned by mining companies after the act was passed. Since abandonment, no reclamation has occurred on most of these sites. The Department of the Interior's Office of Surface Mining questions whether the bonds on the unreclaimed sites, if collected, will be adequate to do the necessary reclamation. Oklahoma's Department of Mines has taken action to increase bond amounts on newly-issued permits and on some older permitted areas in order to prevent future reclamation problems.

  19. A technical review of urban land use - transportation models as tools for evaluating vehicle travel reduction strategies

    SciTech Connect

    Southworth, F.

    1995-07-01

    The continued growth of highway traffic in the United States has led to unwanted urban traffic congestion as well as to noticeable urban air quality problems. These problems include emissions covered by the 1990 Clean Air Act Amendments (CAAA) and 1991 Intermodal Surface Transportation Efficiency Act (ISTEA), as well as carbon dioxide and related {open_quotes}greenhouse gas{close_quotes} emissions. Urban travel also creates a major demand for imported oil. Therefore, for economic as well as environmental reasons, transportation planning agencies at both the state and metropolitan area level are focussing a good deal of attention on urban travel reduction policies. Much discussed policy instruments include those that encourage fewer trip starts, shorter trip distances, shifts to higher-occupancy vehicles or to nonvehicular modes, and shifts in the timing of trips from the more to the less congested periods of the day or week. Some analysts have concluded that in order to bring about sustainable reductions in urban traffic volumes, significant changes will be necessary in the way our households and businesses engage in daily travel. Such changes are likely to involve changes in the ways we organize and use traffic-generating and-attracting land within our urban areas. The purpose of this review is to evaluate the ability of current analytic methods and models to support both the evaluation and possibly the design of such vehicle travel reduction strategies, including those strategies involving the reorganization and use of urban land. The review is organized into three sections. Section 1 describes the nature of the problem we are trying to model, Section 2 reviews the state of the art in operational urban land use-transportation simulation models, and Section 3 provides a critical assessment of such models as useful urban transportation planning tools. A number of areas are identified where further model development or testing is required.

  20. IDRISI Land Change Modeler | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    IDRISI Land Change Modeler Jump to: navigation, search Tool Summary LAUNCH TOOL Name: IDRISI Land Change Modeler AgencyCompany Organization: Clark Labs Sector: Land Focus Area:...

  1. Final Reclamation Report: Basalt Waste Isolation Project exploratory shaft site

    SciTech Connect

    Brandt, C.A.; Rickard, W.H. Jr.

    1990-06-01

    The restoration of areas disturbed by activities of the Basalt Waste Isolation Project (BWIP) constitutes a unique operation at the US Department of Energy's (DOE) Hanford Site, both from the standpoint of restoration objectives and the time frame for accomplishing these objectives. The BWIP reclamation program comprises three separate projects: borehole reclamation, Near Surface Test Facility (NSTF) reclamation, and Exploratory Shaft Facility (ESF) reclamation. The main focus of this report is on determining the success of the revegetation effort 1 year after work was completed. This report also provides a brief overview of the ESF reclamation program. 21 refs., 7 figs., 14 tabs.

  2. U.S. Department of Energy Office of Legacy Management Legacy Uranium Mine Site Reclamation - Lessons Learned - 12384

    SciTech Connect

    Kilpatrick, Laura E.; Cotter, Ed

    2012-07-01

    The U.S. Department of Energy (DOE) Office of Legacy Management is responsible for administering the DOE Uranium Leasing Program (ULP) and its 31 uranium lease tracts located in the Uravan Mineral Belt of southwestern Colorado (see Figure 1). In addition to administering the ULP for the last six decades, DOE has also undertaken the significant task of reclaiming a large number of abandoned uranium (legacy) mine sites and associated features located throughout the Uravan Mineral Belt. In 1995, DOE initiated a 3-year reconnaissance program to locate and delineate (through extensive on-the-ground mapping) the legacy mine sites and associated features contained within the historically defined boundaries of its uranium lease tracts. During that same time frame, DOE recognized the lack of regulations pertaining to the reclamation of legacy mine sites and contacted the U.S. Bureau of Land Management (BLM) concerning the reclamation of legacy mine sites. In November 1995, The BLM Colorado State Office formally issued the United States Department of the Interior, Colorado Bureau of Land Management, Closure/Reclamation Guidelines, Abandoned Uranium Mine Sites as a supplement to its Solid Minerals Reclamation Handbook (H-3042-1). Over the next five-and-one-half years, DOE reclaimed the 161 legacy mine sites that had been identified on DOE withdrawn lands. By the late 1990's, the various BLM field offices in southwestern Colorado began to recognize DOE's experience and expertise in reclaiming legacy mine sites. During the ensuing 8 years, BLM funded DOE (through a series of task orders) to perform reclamation activities at 182 BLM mine sites. To date, DOE has reclaimed 372 separate and distinct legacy mine sites. During this process, DOE has learned many lessons and is willing to share those lessons with others in the reclamation industry because there are still many legacy mine sites not yet reclaimed. DOE currently administers 31 lease tracts (11,017 ha) that collectively

  3. Spoil handling and reclamation costs at a contour surface mine in steep slope Appalachian topography

    SciTech Connect

    Zipper, C.E.; Hall, A.T.; Daniels, W.L.

    1985-12-09

    Accurate overburden handling cost estimation methods are essential to effective pre-mining planning for post-mining landforms and land uses. With the aim of developing such methods, the authors have been monitoring costs at a contour surface mine in Wise County, Virginia since January 1, 1984. Early in the monitoring period, the land was being returned to its Approximate Original Contour (AOC) in a manner common to the Appalachian region since implementation of the Surface Mining Control and Reclamation Act of 1977 (SMCRA). More recently, mining has been conducted under an experimental variance from the AOC provisions of SMCRA which allowed a near-level bench to be constructed across the upper surface of two mined points and an intervening filled hollow. All mining operations are being recorded by location. The cost of spoil movement is calculated for each block of coal mined between January 1, 1984, and August 1, 1985. Per cubic yard spoil handling and reclamation costs are compared by mining block. The average cost of spoil handling was $1.90 per bank cubic yard; however, these costs varied widely between blocks. The reasons for those variations included the landscape positions of the mining blocks and spoil handling practices. The average reclamation cost was $0.08 per bank cubic yard of spoil placed in the near level bench on the mined point to $0.20 for spoil placed in the hollow fill. 2 references, 4 figures.

  4. Economic assessment of the impact on coal production due to enforcement of the Surface Mining Control and Reclamation Act of 1977. Benefits report. Volume 1. Final report

    SciTech Connect

    Kyle, T.N.; McOmber, R.M.; Roberts, J.M.

    1980-10-31

    The study assesses the major economic benefits and costs that are associated with the enforcement of the Surface Mining Control and Reclamation ACt (SMCRA). The report addresses the benefits of surface coal mining and land reclamation that follow from the Act. As originally conceived, the study was to evaluate, preferably in monetary terms, the specific benefits and socio-economic impacts of SMCRA. However, it was apparent, in the course of the initial analysis, that historical evaluation of specific benefits and socio-economic/environmental impacts is complicated by the short time that SMCRA has been in operation. It was also apparent that development of substantive, and defensible, quantified estimates of benefits and impacts is hindered by the absence of a great deal of needed numerical data, and by incomplete understanding of the reclamation processes that the Act is intended to enhance. Rather than attempt to evaluate specific benefits and socio-economic/environmental impacts, the study evaluated existing research studies on the impacts of surface mining, land reclamation, and SMCRA, and evaluated existing data sources relevant to surface mining, land reclamation, and SMCRA.

  5. Wastewater Reclamation and Biofuel Production Using Algae

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Wastewater Reclamation and Biofuel Production Using Algae Tryg Lundquist, Ph.D., P.E., Presenter Ian Woertz, Matt Hutton, Ruth Spierling, Shelley Blackwell, Braden Crowe Bioenergy | June 24, 2015 | Washington DC 1 California Polytechnic State University San Luis Obispo, California MicroBio Engineering, Inc. San Luis Obispo, California * 2014 US DOE Algae Biomass Yield Project * 2013 US DOE Water & Nutrient Recycling Project * 2013 US DOE ATP 3 Testbed Site (Prime: ASU) * 2011 CEC Algae

  6. Surface mining and reclamation effects on flood response of watersheds in the central Appalachian Plateau region - article no. W04407

    SciTech Connect

    Ferrari, J.R.; Lookingbill, T.R.; McCormick, B.; Townsend, P.A.; Eshleman, K.N.

    2009-04-15

    Surface mining of coal and subsequent reclamation represent the dominant land use change in the central Appalachian Plateau (CAP) region of the United States. Hydrologic impacts of surface mining have been studied at the plot scale, but effects at broader scales have not been explored adequately. Broad-scale classification of reclaimed sites is difficult because standing vegetation makes them nearly indistinguishable from alternate land uses. We used a land cover data set that accurately maps surface mines for a 187-km{sup 2} watershed within the CAP. These land cover data, as well as plot-level data from within the watershed, are used with HSPF (Hydrologic Simulation Program-Fortran) to estimate changes in flood response as a function of increased mining. Results show that the rate at which flood magnitude increases due to increased mining is linear, with greater rates observed for less frequent return intervals. These findings indicate that mine reclamation leaves the landscape in a condition more similar to urban areas rather than does simple deforestation, and call into question the effectiveness of reclamation in terms of returning mined areas to the hydrological state that existed before mining.

  7. Proceedings of the 15. annual national meeting of the American Society for Surface Mining and Reclamation. Mining -- Gateway to the future

    SciTech Connect

    Throgmorton, D.; Nawrot, J.; Mead, J.; Galetovic, J.; Joseph, W.

    1998-12-31

    The 124 papers of these proceedings are arranged under the following topical sections: Minerals education; Hydrology--Characterization and monitoring; Tailings--Reclamation; Reforestation; Mine drainage--Biogeochemical processes; Mine drainage--Treatment, general; Mine drainage--Passive treatment, wetlands; Mine drainage--Prediction and monitoring; Acid soils--Reclamation practices; Wildlife and fisheries habitat; Subsidence--Engineering practices and environmental effects; OSM acid forming materials mini workshops; RUSLE--Erosion prediction techniques on mined construction and reclaimed lands; IDNR wetlands technology transfer program; Mine planning and postmining land use; Vegetation establishment--Principles and practices; Vegetation establishment--Warm season grasses; Coal combustion by-products--General; Coal combustion by-products--Mine drainage treatment; and Prime farmland reclamation and mine soils management. Papers within scope have been processed separately for inclusion on the data base.

  8. Reforesting Appalachia`s coal lands

    SciTech Connect

    Hopps, M.

    1994-11-01

    Currently, in those four states` primary coal counties, some 5,000 to 6,000 acres are surface-mined each year. Since 1977, when Congress passed the landmark Surface Mining Control and Reclamation Act (SMCRA), coal-mining companies have been required to refill the cuts they make and return the earth`s surface to approximately its original contours. Reclamation here means to aggressively-and literally-lay the groundwork for future cultivation of these lands. SMCRA calls for detailed reclamation plans before mining takes place, backed later by evaluations of how vegatation progresses up until the time of bond release-five years after mining ends. And though SMCRA has succeeded in improving the aesthetic appeal of post-mined sites, it does nothing to ensure that the most appropriate land use will be implemented for the long run.

  9. Renewable Energy Assessment for the Bureau of Reclamation

    SciTech Connect

    Haase, S.; Burman, K.; Dahle, D.; Heimiller, D.; Van Geet, O.

    2012-05-01

    Report summarizes the results of an assessment and analysis of renewable energy opportunities conducted for the U.S. Department of Interior, Bureau of Reclamation (Reclamation) by the National Renewable Energy Laboratory (NREL). Report contains results from utility scale analysis and site visits, as well as facility scale screening and site visits.

  10. Manual for training reclamation inspectors in the fundamentals of hydrology

    SciTech Connect

    Curtis, W.R.; Dyer, K.L.; Williams, G.P.

    1988-01-01

    This handbook is intended to be a desk reference to help nonhydrologists achieve a basic understanding of hydrology as it relates to surface mining and reclamation. Surface coal mining and reclamation inspectors and other staff will find it useful in implementing regulatory programs. The handbook is not meant to be a comprehensive treatment of the subject. The handbook can be used in the training of surface-mining and reclamation inspectors, both Federal and State, and as a basic reference for inspectors in carrying out their assigned duties. The handbook describes clues and indicators of potential problems, suggests ways to prevent or mitigate them, and discusses various observation and sampling techniques.

  11. Adequacy of bonds to ensure reclamation of surface mines. Hearing before a Subcommittee of the Committee on Government Operations, House of Representatives, Ninety-Ninth Congress, Second Session, June 26, 1986

    SciTech Connect

    Not Available

    1986-01-01

    Jed Christensen, Director of the Office of Surface Mining's Reclamation and Enforcement Department, and Michael Gryschowiec of the General Accounting Office (GAO) were the principal witnesses at a hearing held to examine the effects of Section 509 of the Surface Mining Control and Reclamation Act of 1977. At issue was the bonding program and unhappiness on the part of landowners who want their land restored and coal operators who are having difficulty obtaining bonds for reclamation. Gryschowiec described the GAO's review of the bonding system for funding reclamation, and its finding that existing bonds are inadequate. Christensen focused his testimony on efforts to improve the bonding process, including a bond estimating handbook, extensive oversight of State bonding and permitting procedures, and evaluation of the bond pooling system. Correspondence and statements submitted for the record follow the testimony.

  12. Bureau of Reclamation Small Conduit Hydropower Development and...

    OpenEI (Open Energy Information) [EERE & EIA]

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Bureau of Reclamation Small Conduit Hydropower Development and Rural Jobs Act of 2013Legal...

  13. Enhanced cover methods for surface coal refuse reclamation

    SciTech Connect

    Gentile, L.F.; Cargill, K.W.; McGarvie, S.D.

    1997-12-31

    Controlling acid rock drainage (ARD) can be a major component of surface mining reclamation. An enhanced reclamation cover system is being constructed to control infiltration of rain water and generation of ARD from coal-refuse disposal areas at a closed mine in southern Illinois. Development of the mine reclamation plan required consideration of ARD generation in coal refuse disposal areas located adjacent to an alluvial aquifer used for public water supply. An integrated site characterization was performed at the mine to provide information to develop and support the enhanced reclamation plan. The enhanced cover system is similar to covers required for municipal solid waste landfills by the Resource Conversation and Recovery Act (RCRA), Subtitle D regulations. The system comprises a graded and compacted gob layer, overlain by a compacted clay liner, and a protective soil cover. The results of infiltration modeling and analyses showed that the standard reclamation cover is effective in reducing infiltration by about 18 percent compared to an unreclaimed coal-refuse surface. The modeling results showed that the inhanced cover system should reduce infiltration by about 84 percent. The geochemical modeling results showed that the reduction in infiltration would help minimize ARD generation and contribute to an earlier reclamation of the mine site.

  14. Agriculture and Land Use National Greenhouse Gas Inventory Software...

    OpenEI (Open Energy Information) [EERE & EIA]

    Agriculture and Land Use National Greenhouse Gas Inventory Software Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Agriculture and Land Use National Greenhouse Gas...

  15. Abandoned Mine Reclamation Fund - a view from the West

    SciTech Connect

    Collins, J.D.

    1985-01-01

    Congress created the Abandoned Mine Reclamation Fund (AML) in 1977 as part of the Surface Mining Control and Reclamation Act. The AML is funded by a special tax on coal mining. About one-third of AML fees will be paid by coal operators in the western states. The author examines the disbursement of AML funds under the Reagan Administration. He describes how the western state governments expected a generous portion of the AML funds for coal and non-coal reclamation, as well as community impact assistance projects in their states. Finally, the author shows how the Office of Surface Mining has largely frustrated the western expectations through its interpretation of the AML disbursement priorities.

  16. Surface Mining Control and Reclamation Act: A Utah perspective

    SciTech Connect

    Nielson, D.

    1989-01-01

    The authority to regulate the coal industry at the state level, under state statute and rules, the importance of the coal industry to the state, the importance of an environmentally sound regulatory program, and the benefit of a state-managed abandoned mine reclamation program, in short the ability of the state to manage its own natural resources, make state primacy a necessity, not an option. Implementation of SMCRA cannot be measured in the myriad of oversight statistics. Effectiveness means cost-effective, timely reclamation of abandoned sites; consistent, workable rules and regulatory practices; responsive program management; and compliance which is internalized in the mine's operations.

  17. Land use and energy

    SciTech Connect

    Robeck, K.E.; Ballou, S.W.; South, D.W.; Davis, M.J.; Chiu, S.Y.; Baker, J.E.; Dauzvardis, P.A.; Garvey, D.B.; Torpy, M.F.

    1980-07-01

    This report provides estimates of the amount of land required by past and future energy development in the United States and examines major federal legislation that regulates the impact of energy facilities on land use. An example of one land use issue associated with energy development - the potential conflict between surface mining and agriculture - is illustrated by describing the actual and projected changes in land use caused by coal mining in western Indiana. Energy activities addressed in the report include extraction of coal, oil, natural gas, uranium, oil shale, and geothermal steam; uranium processing; preparation of synfuels from coal; oil refineries; fossil-fuel, nuclear, and hydro-electric power plants; biomass energy farms; and disposal of solid wastes generated during combustion of fossil fuels. Approximately 1.1 to 3.3 x 10/sup 6/ acres were devoted to these activities in the United States in 1975. As much as 1.8 to 2.0 x 10/sup 6/ additional acres could be required by 1990 for new, nonbiomass energy development. The production of grain for fuel ethanol could require an additional 16.9 to 55.7 x 10/sup 6/ acres by 1990. Federal laws that directly or indirectly regulate the land-use impacts of energy facilities include the National Environmental Protection Act, Clean Air Act, Federal Water Pollution Control Act, Surface Mining Control and Reclamation Act, and Coastal Zone Management Act. The major provisions of these acts, other relevant federal regulations, and similar state and local regulatons are described in this report. Federal legislation relating to air quality, water quality, and the management of public lands has the greatest potential to influence the location and timing of future energy development in the United States.

  18. Mccallum study area: resource and potential reclamation evaluation. Final report

    SciTech Connect

    Not Available

    1983-09-01

    The purpose of this investigation was to collect baseline data for establishing reclamation objectives and lease stipulations. The report includes data on climate, biological and cultural resources, physiography, geology, coal resources, soil overburden, vegetation, and hydrology. The study area is within Moffat County in Colorado.

  19. Western surface mine permitting and reclamation. Volume 2. Contractor documents. Part B. Hydrologic evaluation and reclamation technologies for western surface coal mining

    SciTech Connect

    Not Available

    1986-07-01

    The report presents an analysis of the hydrologic evaluation and reclamation technologies of western surface coal mining as they have evolved and advanced since passage of the Federal Surface Mine Control and Reclamation Act of 1977 (SMCRA). The primary emphasis of the report is threefold, addressing: Hydrologic data used in the preparation and review of mining and reclamation plans. Analytical techniques used to predict and evaluate the hydrologic impacts of mining. Evaluation criteria used to determine the success of hydrologic restoration. The report also discusses special reclamation practices used to preserve and restore the essential hydrologic functions of alluvial valley floors.

  20. Reclamation of urban stormwater. Book chapter

    SciTech Connect

    Field, R.

    1993-01-01

    Rainfall runoff becomes contaminated as it passes over urban land. Billions of gallons of water can be recovered for beneficial uses if urban stormwater is properly controlled and treated. The Storm and Combined Sewer Program of the United States Environmental Protection Agency Office of Research and Development has continuously supported the development and demonstration of stormwater control systems and treatment processes. Water quality of the treated storm runoff can meet the required standards for subpotable usage. Current urban stormwater control and treatment technology are discussed, leading to the feasibility of urban stormwater reuse for various purposes in industry, irrigation and recreation. A hypothetical case study illustrating the cost effectiveness of reclaiming urban stormwater for complete industrial supply is presented.

  1. Evaluating mine reclamation habitats at the landscape level following mountain-top removal

    SciTech Connect

    Edmonds, S.N.

    1998-12-31

    Present-day regulations of the Surface Mining Control and Reclamation Act were based largely on the technologies and mining methods of the late 1970`s. Thus reclamation management practices today may not fully address the landscape changes that are possible now from mountain-top removal and associated contour mining operations. This study has sought to evaluate the changes in human and natural resource systems associated with large-scale mining in the Coal River Valley region of south-central West Virginia. The Coal River Valley region was studied at a local to a landscape-scale using ground-level sampling, aerial photomaps and constructed GIS maps, starting from a site-specific-scale of natural and restored habitat types. Six watershed-drainage areas were selected for study. Three of these represented contour mining primarily and three other drainage areas encompassed mountain-top removal mining. Landscape components were characterized by overlaying slope, elevation and contour data from maps onto aerial photomaps. On-the-ground sampling was used to distinguish restoration habitat types. The site-specific measurements were obtained using transects placed across the man-made landforms (i.e., backfill, valleyfill, field, pond and drainage ditch) of the reclamation sites in each of the six watershed drainage areas. All of the measured sites had been revegetated with a seed mixture for a wildlife management plan and ranged in age from 2 to 12 years of vegetative growth at the time of the study. Percentage cover by herbaceous and woody species was determined in two-meter square quadrats placed mechanically along all transect lines to quantify the various site-specific vegetation types. Based on the site-specific evaluation, distinguishable habitats were found on each of the man-made landforms. The percentage of mountaintop removal habitats with non-native species has increased over the last decade. Percentages of total area mined in the region over thirty years were

  2. Establishment of warm-season native grasses and forbs on drastically disturbed lands

    SciTech Connect

    Miller, S.

    1998-12-31

    Establishment of warm-season native grasses and forbs (WSNGs) has been viewed by landowners, agronomists, natural resource managers and reclamation specialists as being too expensive and difficult, especially for reclamation, which requires early stand closure and erosion control. Natural resource managers have learned a great deal about establishing WSNGs since the implementation of the 1985 Farm Bill`s Conservation Reserve Program (CRP). Reclamation specialists must begin to use this information to improve reclamation success. Quality control of seed equipment and planting methods has been proven to be the crucial first step in successful establishment. Seedling germination, growth and development of WSNGs are different from that of introduced cool-season grasses and legumes. Specialized seed drills and spring planting periods are essential. Because shoot growth lags far behind root growth the first two seasons, WSNGs often are rejected for reclamation use. Usually, the rejection is based on preconceived notions that bare ground will erode and on reclamation specialists` desire for a closed, uniform, grassy lawn. WSNG`s extensive root systems inhibit rill and gully erosion by the fall of the first season. Planting a weakly competitive, short-lived nurse crop such as perennial ryegrass (Lolium perenne) at low rates with the WSNG mixture can reduce first-season sheet and rill erosion problems and give an appearance of a closed stand. Benefits of WSNGs in soil building and their acid-tolerance make them ideal species for reclamation of drastically disturbed lands. WSNGs and forbs enhance wildlife habitat and promote natural succession and the invasion of the reclamation site by other native species, particularly hardwood trees, increasing diversity and integrating the site into the local ecosystem. This is perhaps their most important attribute. Most alien grasses and legumes inhibit natural succession, slowing the development of a stable mine soil ecosystem. This

  3. Interim reclamation report: Basalt Waste Isolation Project exploration shaft site

    SciTech Connect

    Brandt, C.A.; Rickard, W.H. Jr.; Hefty, M.G.

    1990-02-01

    In 1968, a program was started to assess the feasibility of storing Hanford Site defense waste in deep caverns constructed in basalt. This program was expanded in 1976 to include investigations of the Hanford Site as a potential location for a mined commercial nuclear waste repository. Extensive studies of the geotechnical aspects of the site were undertaken, including preparations for drilling a large diameter Exploratory Shaft. This report describes the development of the reclamation program for the Exploratory Shaft Facility, its implementation, and preliminary estimates of its success. The goal of the reclamation program is to return sites disturbed by the repository program as nearly as practicable to their original conditions using native plant species. 43 refs., 19 figs., 9 tabs.

  4. Approval of State and Indian Reclamation Program grants under Title IV of the Surface Mining Control and Reclamation Act of 1977: final environmental import statement

    SciTech Connect

    Not Available

    1983-01-01

    Approval of annual grant applications to states and Indian tribes is proposed in accordance with Title IV of the Surface Mining Control and Reclamation Act of 1977 (SMCRA). The grants are financed through assessments for abandoned coal mine reclamation. Fund collections are to continue through 1992. Granting of all available funds would provide the maximum possible amount of money and promote the highest level of reclamation of mined areas. Health and safety hazards associated with unreclaimed mines would be lessened, and habitat for fish, wildlife, and vegetation would be enhanced significantly. Mining reclamation projects would require evacuation of residents in affected areas. Reclamation activities would create dust and sediments, degrading air quality and surface flows. Endangered bat species dwelling in mine openings would be displaced or destroyed due to mine closures.

  5. EIS-0370: Bureau of Reclamation, Interior, Notice of Availability of the

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Final Environmental Impact Statement | Department of Energy Bureau of Reclamation, Interior, Notice of Availability of the Final Environmental Impact Statement EIS-0370: Bureau of Reclamation, Interior, Notice of Availability of the Final Environmental Impact Statement Windy Gap Firming Project, Colorado Download Document EIS-0370: Bureau of Reclamation, Interior, Notice of Availability of the Final Environmental Impact Statement (144.87 KB) More Documents & Publications EIS-0370: Record

  6. EIS-0480: Bureau of Reclamation and National Park Service Notice of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Availability of Draft Environmental Impact Statement | Department of Energy Bureau of Reclamation and National Park Service Notice of Availability of Draft Environmental Impact Statement EIS-0480: Bureau of Reclamation and National Park Service Notice of Availability of Draft Environmental Impact Statement Long-Term Experimental and Management Plan for the Operation of Glen Canyon Dam The Bureau of Reclamation and the National Park Service issued a notice of availability of a Draft EIS that

  7. integrated-land-use

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    An Integrated Land Use and Transportation Planning Tool for Sydney, Australia Dr. Matthew Berryman, University of Wollongong Monday, November 28, 2011 - 1pm Argonne TRACC Building 222, Room D-233 The SMART Infrastructure Facility at the University of Wollongong, Australia, has been building an agent-based model to explore the feedbacks between transportation and land use. We focus on livability as a key driver of agent's location choice, and in addition to transport we include factors such as:

  8. Analysis of alternative modifications for reducing backwater flooding at the Honey Creek coal strip-mine reclamation site in Henry County, Missouri. Water Resources Investigation

    SciTech Connect

    Alexander, T.W.

    1990-01-01

    Studies to determine the hydrologic conditions in mined and reclaimed mine areas, as well as areas of proposed mining, have become necessary with the enactment of the Surface Mining Control and Reclamation Act of 1977. Honey Creek in Henry County, Missouri, has been re-routed to flow through a series of former strip mining pits which lie within the Honey Creek coal strip mine reclamation site. During intense or long duration rainfalls within the Honey Creek basin, surface runoff has caused flooding on agricultural land near the upstream boundary of the reclamation site. The calculated existing design discharge (3,050 cubic feet per second) water-surface profile is compared to the expected water-surface profiles from three assumed alternative channel modifcations within the Honey Creek study area. The alternative channel modifications used in these analyses include (1) improvement of channel bottom slope, (2) relocation of spoil material, and (3) improved by-pass channel flow conditions. The alternative 1, 2, and 3 design discharge increase will reduce the agricultural field current (1990) frequency of backwater flooding from a 3-year to a 6.5-year event.

  9. Remining to reclaim abandoned mined lands: Virginia`s initiative

    SciTech Connect

    Zipper, C.E.; Lambert, B.

    1998-12-31

    Abandoned Mined Lands (AML) are lands that were mined prior to implementation of the federal Surface Mining Control and Reclamation Act (SMCRA) in 1977, but were inadequately reclaimed. Re-mining of AML is being conducted on a routine basis by coal-mining operations in eastern states such as Virginia. Re-mining is a potentially important means of reclaiming AML. However, under current policies, re-mining operations often fail to permit and reclaim priority 1, 2, and 3 AML, especially those areas which present the most severe environmental problems. This paper describes policy issues which affect the potential for AML reclamation by re-mining operations in mountainous mining areas, such as Virginia; efforts underway in Virginia which seek to resolve those issues; and progress achieved to date under that initiative.

  10. The Los Alamos National Laboratory Neutron Source Reclamation Program

    SciTech Connect

    Behrens, R.G.; Jones, S.W.

    1994-05-01

    Over the past fifty years, the Los Alamos National Laboratory has developed an extensive capability to handle significant quantities of nuclear materials as part of its role in support of DOE Defense Program activities. The goals and objectives of these activities are met through a base program in nuclear materials technology research, development, and demonstration as well as through additional programs (such as the Neutron Source Reclamation Program) aimed at specific, often near-term goals. This base program encompasses (1) plutonium process technology research, development and demonstration activities, (2) technology transfer and offsite technical support, (3) nuclear materials recycle and recovery, and (4) nuclear facility operations and maintenance.

  11. Promoting economic incentives for environmental protection in the Surface Mining Control and Reclamation Act of 1977: an analysis of the design and implementation of reclamation performance bonds

    SciTech Connect

    Webber, B.S.; Webber, D.J.

    1985-04-01

    This article examines the bonding system designed by the Surface Mining Control and Reclamation Act of 1977 (SMCRA) and some alternatives developed by several states in their regulatory programs. As well, it evaluates the systems for their potential to provide economic incentives for coal operators to engage in environmentally sound mining techniques throughout the duration of the mining activities. The first section of this article briefly reviews the SMCRA. The second section outlines the specific reclamation bonding provisions of the act. The third section analyzes economic incentives and their application to coal mining, and the fourth section more particularly evaluates the reclamation bonding provisions of the act as market based incentives. Finally, the article assesses the design of reclamation bonds and suggests modifications intended to provide greater incentives for coal producers to protect the environment. 132 references.

  12. Low-Carbon Land Transport Policy Handbook | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Policy Handbook Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low-Carbon Land Transport Policy Handbook AgencyCompany Organization: Routledge ComplexityEase...

  13. Safety problems of water-development works designed for land reclamation

    SciTech Connect

    Shchedrin, V. N.; Kosichenko, Yu. M.

    2011-11-15

    A safety declaration is a fundamental document assuring the safety of water-development works, their correspondence to safety criteria, the design, and active technical regulations and rules.

  14. Thermal reclamation of used blast grit. Technology spotlight report

    SciTech Connect

    1995-08-01

    Naval shipyards and other domestic port facilities generate thousands of tons of used blast grit annually. There are also thousands of steel bridges in the United States on a repaint schedule that requires grit blasting for surface preparation. All the used grit, along with the paint residue it contains, is currently disposed of in landfills. Cleaning and recycling used blast grit is an attractive alternative. Institute of Gas Technology (IGT) has developed a fluidized-bed sand calciner that is well suited for cleaning and recycling used blast grit. Essentially, IGT researchers applied a transfer/adaptation of fluidized-bed calcination originally developed for the reclamation of foundry sand. The calciner has a patented sloped-grid design that enhances the combustion of paint residues and promotes the isolation of reusable material.

  15. Implementing a program of cooperative federalism: The Surface Mining Control and Reclamation Act of 1977

    SciTech Connect

    Miller, R.

    1989-01-01

    This article outlines the legislative history of the Surface Mining Control and Reclamation Act of 1977 and describes the forces that promoted a federalist arrangement of shared powers and responsibility for implementing the environmental reclamation provisions of the Act. The major components of the Act are reviewed and the Act is examined in terms of its general effectiveness in promoting reclamation as well as its contribution to the practice of American federalism and the capacity of state government to implement complex regulatory programs. The article concludes that SMCRA has had a positive impact in terms of improving state capabilities, expanding public involvement in decision making, and enhancing federal and state cooperation.

  16. Restoration of abandoned mine lands through cooperative coal resource evaluations

    SciTech Connect

    Hoskins, D.M.; Smith, M.

    1996-12-31

    The public reclamation cost of reclaiming all of Pennsylvania`s abandoned mine lands is estimated at $15 billion. Drainage from abandoned mines poses another $5 billion water pollution clean-up problem. Although it is unlikely that public reclamation alone could ever tackle these problems, much can be done to alleviate the nuisances through the remining of previously mined areas to recover remaining reserves, restore the land and improve water quality in the same process. Remining of priority areas is encouraged through a new Pennsylvania policy which provides incentives to mining companies. One incentive, initiated under Pennsylvania`s comprehensive mine reclamation strategy, is to identify and geologically map reminable coal resources in selected watersheds, and then to expedite mine permitting in these watersheds. At present, two such priority watersheds, Little Toby Creek in Elk County and Tangascootak Creek in Clinton County, are the focus of geologic map compilation based on recent quadrangle mapping, or new, directed, geologic mapping, including new research core drilling to establish the geologic stratigraphic framework. In order to maximize environmental benefits the comprehensive mine reclamation strategy identifies watersheds which are affected by acid mine drainage (AMD), but that are reasonably capable of restoration, if sufficient coal reserves remain. Pennsylvania`s geochemical quality database of rock overburden, in combination with detailed coal resource mapping by the Pennsylvania Geological Survey, and the cooperation of coal companies and leaseholders, is being used by the Department of Environmental Protection (DEP) to identify and design remining projects which will not only allow the recovery of coal resources, but will also improve the water quality through a variety of innovative mining techniques.

  17. Terry Land

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    terry land Terry Land Terry Land follows the path of opportunity You came to the Lab as a postdoc after you got your PhD in physical chemistry from UC Irvine. What was your first research project? I was hired to do surface science-which was my background-and to work on high explosives which had never even contemplated working on. I had a lab set up in the basement of the biology building for these experiments. I also worked part time at the Sandia Combustion Research Facility while waiting for

  18. Development of a thermal reclamation system for spent blasting abrasive

    SciTech Connect

    Bryan, B.B.; Mensinger, M.C.; Rehmat, A.G.

    1991-01-01

    Abrasive blasting is the most economical method for paint removal from large surface areas such as the hulls and tanks of oceangoing vessels. Tens of thousands of tons of spent abrasive are generated annually by blasting operations in private and US Navy shipyards. Some of this material is classified as hazardous waste, and nearly all of it is currently being either stockpiled or disposed in landfills. The rapid decline in available landfill space and corresponding rise in landfill tipping fees pose a severe problem for shipyard operators throughout the US. This paper discusses the results of a research and development program initiated by the Institute of Gas Technology and supported by the US Navy to develop and test a fluidized-bed thermal reclamation system for spent abrasive waste minimization. Bench- and pilot-scale reclaimer tests and reclaimed abrasive performance tests are described along with the current status of a program to build and test a 5-ton/hour prototype reclaimer at a US Navy shipyard.

  19. Reinterpreting SMCRA: {open_quotes}Permitting{close_quotes} phased postmining land use

    SciTech Connect

    Merkin, Z.R.; Nieman, T.J.

    1996-12-31

    The coal producing area of Appalachian Kentucky has a shortage of developable land. The majority of mined land in this region has been reclaimed to pastureland or hayland, while narrow interpretation of the Surface Mining Control and Reclamation Act of 1977 (SMCRA) and regulations, especially regarding bond release, has limited alternative postmining land uses which could support economic development. A study of Federal and State of Kentucky laws and regulations shows that postmining land use regulations and their implementation have focussed on preventing and minimizing environmental damage. Land use and land use planning concepts are not well understood, thus permit applications inadequately address land use needs and the {open_quotes}highest and best use{close_quotes} of a site. Required information about pre-mining conditions is not collected and analyzed in a way useful for determining appropriate postmining land use. More comprehensive, higher quality land use information, with information about regional factors such as transportation, utilities, labor market, etc., should be included in the permit application to identify sites with strong development potential. This, combined with a broader interpretation of the law recognizing the validity of a phased implementation of postmined land use, would continue environmental protection while preparing reclaimed land to meet potential future land use needs. The mining plan can be designed so that appropriate areas are prepared and laid out for future buildings or roads, yet are conducive to interim use for pasture, wildlife or recreation. Reclamation to the interim use, sufficient to protect the public and allow bond release, maintains the potential for later development. Land later can be made available in response to development demands, contributing to a more diversified economy.

  20. Reclamation of acidic copper mine tailings using municipal biosolids

    SciTech Connect

    Rogers, M.T.; Thompson, T.L.; Bengson, S.A.

    1998-12-31

    Reclamation of copper mine tailings in a cost effective, successful, and sustainable manner is an ongoing area of evaluation in the arid southwest. A study was initiated in September, 1996 near Hayden, Arizona to evaluate the use of municipal biosolids for reclaiming acidic copper mine tailings (pH of 2.5 to 4.0). The main objectives of the study were to (1) define an appropriate level of biosolids application for optimum plant growth, and (2) evaluate the effects of green waste and lime amendments. The experiment was a randomized complete block design with four biosolid rates of 20, 70, 100 and 135 dry tons/acre, three amendment treatments (none, green waste, and green waste plus lime); with three replications. Non-replicated controls (no treatment, green waste only and lime only) were included for comparison. Shortly after biosolids incorporation to a depth of 10--12 inches, composite soil samples (0--12 inches) of each plot were taken. Biosolids incorporation increased the pH of the tailings (>5.75) and additional increases in pH were noted with lime application. In January 1997, the plots were seeded and sprinkler irrigation was commenced. A total of 4.47 inches of rainfall and 3.8 inches of irrigation were applied until harvest in May 1997. Data from the first growing season indicates optimum growth (>66 lbs/acre) at biosolids rates of 70--100 dry tons/acre. There was a significant positive effect on growth of green waste and lime amendments. Surface NO{sub 3}-N concentrations in biosolids amended plots were greatly reduced (from 23 to 6 mg/kg) by addition of green waste. There was no evidence for NO{sub 3}N leaching below 12 inches.

  1. Final technical evaluation report for the proposed revised reclamation plan for the Atlas Corporation Moab Mill

    SciTech Connect

    1997-03-01

    This final Technical Evaluation Report (TER) summarizes the US Nuclear Regulatory Commission staff`s review of Atlas Corporation`s proposed reclamation plan for its uranium mill tailings pile near Moab, Utah. The proposed reclamation would allow Atlas to (1) reclaim the tailings pile for permanent disposal and long-term custodial care by a government agency in its current location on the Moab site, (2) prepare the site for closure, and (3) relinquish responsibility of the site after having its NRC license terminated. The NRC staff concludes that, subject to license conditions identified in the TER, the proposed reclamation plan meets the requirements identified in NRC regulations, which appear primarily in 10 CFR Part 40. 112 refs., 6 figs., 16 tabs.

  2. National inventory of abandoned mine land problems: an emphasis on health, safety, and general welfare impacts

    SciTech Connect

    Honea, R.B.; Baxter, F.P.

    1984-07-01

    In 1977 Congress passed the Surface Mining Control and Reclamation Act, which provided for the abatement of abandoned mine land (AML) problems through a reclamation program funded by a severance tax on current mining. AML was defined as any land, including associated buildings, equipment, and affected areas, that was no longer being used for coal mining by August 1977. This act also created the Office of Surface Mining (OSM) in the Department of the Interior to administer the AML program and to assume other regulatory and research responsibilities. This report documents the design, implementation, and results of a National inventory of the most serious problems associated with past mining practices. One of the objectives of the Inventory was to help OSM and the participating states locate, identify, and rank AML problems and estimate their reclamation costs. Other objectives were to encourage states and Indian tribes to collect such data and to provide OSM with the information necessary to guide its decision-making processes and to quantify the progress of the reclamation program. Because only limited funds were available to design and implement the National inventory and because the reclamation fund established by the Act may never be sufficient to correct all AML problems, OSM has focused on only the top-priority problems. It is stressed that this is not an inventory of AML features but rather an inventory of AML impacts. It should be noted that the data and analysis contained in this report are based on a data collection effort conducted by the states, Indian tribes, and OSM contractors between 1979 and mid-1982.

  3. Final Hanford Comprehensive Land-Use Plan Environmental Impact Statement (9/22/1999)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Cover Sheet Final HCP EIS | Cover Sheet 1 2 3 Lead Federal Agency: U.S. Department of Energy (DOE) 4 5 Cooperating Agencies: U.S. Department of the Interior (Bureau of Land Management, Bureau 6 of Reclamation, and U.S. Fish and Wildlife Service); Benton, Franklin, and Grant counties; and 7 the City of Richland, Washington 8 | 9 Consulting Tribal Governments: Nez Perce Tribe Department of Environmental Restoration 10 and Waste Management and the Confederated Tribes of the Umatilla Indian

  4. Review of municipal sludge use as a soil amendment on disturbed lands

    SciTech Connect

    Brandt, C.A.; Hendrickson, P.L.

    1990-08-01

    The US Department of Energy is examining options of improving soil conditions at Hanford reclamation sites. One promising technology is the incorporation of municipal sewage sludge into the soil profile. This report reviews the potential benefits and adverse consequences of sludge use in land reclamation. Land reclamation comprises those activities instigated to return a mechanically disturbed site to some later successional state. Besides the introduction of suitable plant species to disturbed lands, reclamation generally requires measures to enhance long-term soil nutrient content, moisture retention or drainage, and mitigation of toxic effects from metals and pH. One of the more effective means of remediating adverse soil characteristics is the application of complex organic manures such as municipal sewage sludge. Sewage sludges contain complete macro- and micronutrients necessary to sustain plant growth. The application of sewage sludge may reestablish microbial activity in sterile soils. Physical properties, such as water-holding capacity and percentage water-stable aggregates, also improve with the addition of sewage sludge. Sludge applications may also increase the rate of degradation of some hydrocarbon pollutants in soils. Potential adverse impacts associated with the application of sewage sludge to land include negative public perception of human waste products; concerns regarding pathogen buildup and spread in the soils, plants, and water; entrance and accumulation of heavy metals in the food chain; salt accumulation in the soil and ground water; leaching of nitrates into ground water; and accumulation of other potentially toxic substances, such as boron and synthetic hydrocarbons, in the soil, plants, and food chain. 56 refs., 10 tabs.

  5. Highwall elimination and return to approximate original contour as required in the Surface Mining Control and Reclamation Act of 1977. Final report

    SciTech Connect

    Not Available

    1984-03-01

    The report covers the following issues concerning: highwall elimination, reclamation, and approximate original contour in surface-mining applications.

  6. Manual for Social Impact Assessment of Land-Based Carbon Projects...

    OpenEI (Open Energy Information) [EERE & EIA]

    Impact Assessment of Land-Based Carbon Projects Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Manual for Social Impact Assessment of Land-Based Carbon Projects Agency...

  7. GIZ Sourcebook Module 2a: Land Use Planning and Urban Transport...

    OpenEI (Open Energy Information) [EERE & EIA]

    GIZ Sourcebook Module 2a: Land Use Planning and Urban Transport (Espaol) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: GIZ Sourcebook Module 2a: Land Use Planning...

  8. Surface coal mining in Alaska: an investigation of the Surface Mining Control and Reclamation Act of 1977 in relation to Alaskan conditions. Final report

    SciTech Connect

    Not Available

    1980-01-01

    This report was written in response to a mandate in section 708 of the Surface Mining Control and Reclamation Act of 1977 which required the study of surface coal mining conditions in the State of Alaska, in order to determine which, if any, of the provisions of the Act should be modified with respect to surface coal mining operations in Alaska. The report discusses both surface mining and the surface effects of underground mining. The report examines not only the impact of mining at the site of operations but also the effects that extend beyond the mine itself, including effects on social institutions, the economy, the physical well-being of people, and the use of land. The report considers Alaska conditions primarily from the perspective of a potential increase in coal development, not of mining limited to meeting local needs of energy.

  9. Climate Change Mitigation Through Land-Use Measures in the Agriculture...

    OpenEI (Open Energy Information) [EERE & EIA]

    and Forestry Sectors Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Climate Change Mitigation Through Land-Use Measures in the Agriculture and Forestry...

  10. Development Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    More Python Tools Python is an interpreted, general-purpose high-level programming language that is usually accompanied by a variety of useful tools for scientific programming...

  11. Software Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Software Tools Software Tools Copyright materials are released under different mechanisms: Open Source Software and Portfolio Software. CONTACT thumbnail of Kathleen McDonald Head ...

  12. Models & Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Models & Tools - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us ... Multimedia & Software Videos Images Models & Tools Partnerships Tribal Energy Program ...

  13. Enrollment Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Careers, Jobs » Employee, Retiree Resources » New Hire » Benefits » Enrollment Tools Enrollment Tools A comprehensive benefits package with plan options for health care and retirement to take care of our employees today and tomorrow. Contacts Benefits Office (505) 667-1806 Email Enrollment Tools New Hire Benefits Checklist (pdf) New Hire Enrollment Tool (xls

  14. Waste oil reclamation. (Latest citations from the NTIS Bibliographic database). Published Search

    SciTech Connect

    Not Available

    1993-11-01

    The bibliography contains citations concerning the reclamation and recycling of used lubricating oils. Topics include specific program descriptions, re-refining techniques, chemical component analysis, and reclaimed oil performance. Appropriate regulations, standards, and clean-up efforts at sites contaminated by waste oils or waste oil refineries are included. (Contains a minimum of 228 citations and includes a subject term index and title list.)

  15. Waste oil reclamation. (Latest citations from the NTIS database). Published Search

    SciTech Connect

    Not Available

    1993-05-01

    The bibliography contains citations concerning the reclamation and recycling of used lubricating oils. Topics include specific program descriptions, re-refining techniques, chemical component analysis, and reclaimed oil performance. Appropriate regulations, standards, and clean-up efforts at sites contaminated by waste oils or waste oil refineries are included. (Contains a minimum of 222 citations and includes a subject term index and title list.)

  16. Renewable Energy Maps and Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Maps and Tools Renewable Energy Maps and Tools The interactive FEMP Screening Map shows areas of environmental concern, land ownership, and land cover across the United States. It also shows renewable energy resources and economic calculations for photovoltaic, solar ventilation preheating, and solar water heating technologies. The interactive FEMP Screening Map shows areas of environmental concern, land ownership, and land cover across the United States. It also shows renewable energy resources

  17. Land Use and Land Cover Change

    SciTech Connect

    Brown, Daniel; Polsky, Colin; Bolstad, Paul V.; Brody, Samuel D.; Hulse, David; Kroh, Roger; Loveland, Thomas; Thomson, Allison M.

    2014-05-01

    A contribution to the 3rd National Climate Assessment report, discussing the following key messages: 1. Choices about land-use and land-cover patterns have affected and will continue to affect how vulnerable or resilient human communities and ecosystems are to the effects of climate change. 2. Land-use and land-cover changes affect local, regional, and global climate processes. 3. Individuals, organizations, and governments have the capacity to make land-use decisions to adapt to the effects of climate change. 4. Choices about land use and land management provide a means of reducing atmospheric greenhouse gas levels.

  18. Potential highwall use by raptors in coal mine reclamation

    SciTech Connect

    Waage, B.

    1990-12-31

    In 1982, Western Energy Company`s Rosebud Mine, located in southeastern Montana, received legal exception, {open_quotes}a first{close_quotes} in Montana to leave a standing mine highwall extending a native bluff. This bluff extension stands 110 feet high and 900 feet long. Normally, all highwalls by law are reduced to a 5:1 slope. This legal exception was accomplished with the support of several governmental agencies and was justified on the highwalls potential value for raptors. Enhancement measures undertaken on the highwall included the construction of three artificial eryies and the release of young prairie falcons (Falco mexicanus) employing hacking methods of the Peregrine Fund. The hack is now in its fourth year with a total of 46 young falcons having been released. Opportunities exist for creating a more diverse habitat for raptors and other cliff obligate species on reclaimed mine lands in the west. It is believed that this practical approach should be explored.

  19. Percussion tool

    DOEpatents

    Reed, Teddy R.

    2006-11-28

    A percussion tool is described and which includes a housing mounting a tool bit; a reciprocally moveable hammer borne by the housing and which is operable to repeatedly strike the tool bit; and a reciprocally moveable piston enclosed within the hammer and which imparts reciprocal movement to the reciprocally moveable hammer.

  20. Carbon Sequestration on Surface Mine Lands

    SciTech Connect

    Donald Graves; Christopher Barton; Richard Sweigard; Richard Warner; Carmen Agouridis

    2006-03-31

    Since the implementation of the federal Surface Mining Control and Reclamation Act of 1977 (SMCRA) in May of 1978, many opportunities have been lost for the reforestation of surface mines in the eastern United States. Research has shown that excessive compaction of spoil material in the backfilling and grading process is the biggest impediment to the establishment of productive forests as a post-mining land use (Ashby, 1998, Burger et al., 1994, Graves et al., 2000). Stability of mine sites was a prominent concern among regulators and mine operators in the years immediately following the implementation of SMCRA. These concerns resulted in the highly compacted, flatly graded, and consequently unproductive spoils of the early post-SMCRA era. However, there is nothing in the regulations that requires mine sites to be overly compacted as long as stability is achieved. It has been cultural barriers and not regulatory barriers that have contributed to the failure of reforestation efforts under the federal law over the past 27 years. Efforts to change the perception that the federal law and regulations impede effective reforestation techniques and interfere with bond release must be implemented. Demonstration of techniques that lead to the successful reforestation of surface mines is one such method that can be used to change perceptions and protect the forest ecosystems that were indigenous to these areas prior to mining. The University of Kentucky initiated a large-scale reforestation effort to address regulatory and cultural impediments to forest reclamation in 2003. During the three years of this project 383,000 trees were planted on over 556 acres in different physiographic areas of Kentucky (Table 1, Figure 1). Species used for the project were similar to those that existed on the sites before mining was initiated (Table 2). A monitoring program was undertaken to evaluate growth and survival of the planted species as a function of spoil characteristics and

  1. Land application uses of dry FGD by-products. [Quarterly report, January 1, 1994--March 31, 1994

    SciTech Connect

    Dick, W.A.; Beeghly, J.H.

    1994-08-01

    This report contains three separate monthly reports on the progress to use flue gas desulfurization by-products for the land reclamation of an abandoned mine site in Ohio. Data are included on the chemical composition of the residues, the cost of the project, as well as scheduling difficulties and efforts to allay the fears of public officials as to the safety of the project. The use of by-products to repair a landslide on State Route 541 is briefly discussed.

  2. Offshore Design Tools and Methods | Wind | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NREL's CAE Tool, FAST, and its Sub-Modules Illustration of wind turbines in various environments including land-based, shallow water (0-30m), transitional depth (30-60m), and deep ...

  3. Livestock grazing for management of reclaimed land at Navajo Mine: Animal response

    SciTech Connect

    Gamble, D.C.; Gadzia, K.L.; Raisbeck, M.F.

    1997-12-31

    Livestock responses dining grazing of reclaimed land were monitored at the Navajo Mine since 1994. The Navajo Mine Grazing Management Program (GNP) began in 1991 to prepare for bond release and return of reclaimed land to the Navajo Nation by demonstrating the ability of the land to sustain the post-mining land use of livestock grazing. Local Navajos, whose livestock are used in the GMP, are interested in the ability of the land to sustain their livestock. Sustainable livestock grazing implies the ability of animals to thrive, successfully reproduce and maintain the health of the land. Daily care and monitoring of livestock health was carried out by herders hired by the mining company. General animal health parameters including blood selenium levels were monitored quarterly. Livestock responses to grazing reclaimed land have been largely positive. Cows have produced healthy offspring and owners indicate satisfaction with calf size, and overall performance of the cows. Selenium and other blood testing parameters indicate no adverse effect on animal health to date. Hazards associated with reclamation and ongoing mining activities are important considerations for lands being reclaimed for livestock grazing as a post-mining land use and must be monitored carefully during any grazing program. Preliminary results indicate that planned grazing by cattle on reclaimed land at Navajo Mine is feasible and does not adversely affect animal health.

  4. Taxation of expenditures required by the Surface Mining Control and Reclamation Act of 1977 (SMCRA)

    SciTech Connect

    McNally, K.J.

    1987-01-01

    There has been disagreement over whether the expenditures made by the mine operator to comply with the Surface Mining Control and Reclamation Act of 1977 are characterized as capital or deductible expenses. An examination of expenditures made by mine operators during the life of a mine illustrates the dichotomy between deductible and capital expenditures in which special rules may override general capitalization rules to allow the mine operator to deduct a capital expenditure. This makes some expenditures difficult to categorize. Citing case law, the author treats expenditures for exploration and mining permits, performance bonds, and liability insurance. A new provision, section 468, allowing the current deduction for future reclamation and closing costs removed the uncertainty created by prior case law.

  5. Scientific soundness and socio-economic realities in reclamation for habitat

    SciTech Connect

    Trimble, K.D.

    1997-12-31

    Reclamation projects must balance data requirements for scientifically-sound design with uncertainty and socio-economic constraints. Whether designing for physical stability, cultural benefits or ecological enhancements, the reclamation project can work with or fight natural processes (physical, chemical, biological). Projects which anticipate and design to fit natural processes have greater chances of success with lower short and long-term cost, and with achievement of a greater range of social objectives. However, the cost of anticipating natural processes (succession, geomorphic patterns, etc.) increases the budget allocation at the design stage in order to save on construction and maintenance. In southern Ontario, once design teams recognize that designing for an {open_quotes}ideal{close_quotes} natural condition is not feasible, they too often revert to conventional, single-objective approaches which compromise design integrity and social benefits. Case studies are reviewed with analysis of alternative approaches that seek to balance ranges of achievable objectives with cost allocation and scientific soundness.

  6. Waste oil reclamation. (Latest citations from the NTIS bibliographic database). Published Search

    SciTech Connect

    1997-10-01

    The bibliography contains citations concerning methods and equipment for reclamation and recycling of waste oils. Citations discuss recovery, disposal, and reuse of lubricating oils. Topics include economic analysis, programs assessment, re-refining techniques, chemical component analysis, and reclaimed oil evaluation. Regulations and standards for waste oil treatment and waste oil refineries are examined. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  7. McCallum study area: resource and potential reclamation evaluation: executive summary. Final report

    SciTech Connect

    Not Available

    1983-09-01

    The purpose of this investigation was to collect baseline data for establishing reclamation objectives and lease stipulations. The report includes data on climate, biological and cultural resources, physiography, geology, coal resources, soil overburden, vegetation, and hydrology. The study area is within Moffat County in Colorado. The overall effect of mining on hydrology of the area should be minimal, primarily because only small areas of the basins will be mined.

  8. Public participation under the Surface Mining Control and Reclamation Act of 1977: a panoply of rights

    SciTech Connect

    Wood, N.D.

    1980-01-01

    The public participation rights included in the Surface Mining Control and Reclamation Act of 1977 are outlined. Described by some as intricate and complex enough to be a lawyer's dream, the act has nagging rules that may be incapable of serving citizens' rights. This is felt to be too harsh a judgement, however. The goals of an informed participating citizenry can be achieved if the rules are perceived to be aids rather than stumbling blocks. (DCK)

  9. Waste oil reclamation. (Latest citations from the NTIS bibliographic database). Published Search

    SciTech Connect

    1995-03-01

    The bibliography contains citations concerning methods and equipment for reclamation and recycling of waste oils. Citations discuss recovery, disposal, and reuse of lubricating oils. Topics include economic analysis, programs assessment, re-refining techniques, chemical component analysis, and reclaimed oil evaluation. Regulations and standards for waste oil treatment and waste oil refineries are examined. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  10. Waste oil reclamation. (Latest citations from the NTIS bibliographic database). Published Search

    SciTech Connect

    1996-08-01

    The bibliography contains citations concerning methods and equipment for reclamation and recycling of waste oils. Citations discuss recovery, disposal, and reuse of lubricating oils. Topics include economic analysis, programs assessment, re-refining techniques, chemical component analysis, and reclaimed oil evaluation. Regulations and standards for waste oil treatment and waste oil refineries are examined. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  11. TRIDEC Land TRIDEC Land Transfer REQUEST Transfer REQUEST

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Area TRIDEC Land TRIDEC Land Transfer REQUEST Transfer REQUEST 300 Acres 300 Acres Additional Lands Additional Lands Identified for Identified for EA Analysis EA Analysis 2,772...

  12. Feasibility of automatic storage reclamation with concurrent program execution in a LISP environment. Master's thesis

    SciTech Connect

    Cassidy, K.G.

    1985-12-01

    Storage reclamation is the process of reclaiming discarded information and returning the memory space occupied by that discarded information to an available area or list in memory that is available to be utilized by programmers. This increased interest in storage reclamation is a result of the increasing use of list-processing environments. A list-processing environment is a system in which the language manipulates data structures called lists. In classical LISP implementations, program execution/computation continues until there is no more memory available (i.e., the free list of available cells has become exhausted). When this happens, user program(s) HALT and then storage reclamation, in the form of garbage collection, takes over. This halting of programs in the midst of their computation is not only frustrating to programmers and researchers but can also be of crucial importance in other applications. This thesis investigates the feasibility of allowing concurrent program execution with garbage collection. LISP has been selected because it has been estimated that typical LISP programs take 10%-30% of their processing time to perform garbage collection.

  13. Well tool lock mandrel and handling tools therefor

    SciTech Connect

    Higgins, B.D.

    1988-05-24

    A lock mandrel and running tool assembly for setting and locking a well tool in a landing nipple along a well bore is described comprising: a lock mandrel having a body provided with at least one side window; a support shoulder on the body for supporting the mandrel in a no-go landing nipple; a radially movable locking dog in the side window; a longitudinally movable expander sleeve in the body movable within the dog for expanding and locking the dog outwardly and releasing the dog for inward movement, the expander sleeve having an internal annular recess for engagement by a handling tool to move the sleeve upwardly and downwardly and an external annular latch boss along an upper end portion thereof; and a latch ring in the body around the expander sleeve above the locking dog for engagement with the latch boss on the sleeve when the sleeve is at an upper locking position to releasably hold the sleeve in the upper position. The running tool includes a head assembly for connection with an operating tool string; an upper retainer dog assembly supported from the head assembly for releasably coupling the running tool with the body of the lock mandrel; a lower locking lug assembly supported from the head assembly for releasably coupling the running tool with the expander sleeve of the lock mandrel to move the expander sleeve between locking and release positions.

  14. Land Management - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Land Management About Us About Hanford Cleanup Hanford History Hanford Site Wide Programs Contact Us Land Management Email Email Page | Print Print Page |Text Increase Font Size...

  15. Omics Tools

    SciTech Connect

    Schaumberg, Andrew

    2012-12-21

    The Omics Tools package provides several small trivial tools for work in genomics. This single portable package, the “omics.jar” file, is a toolbox that works in any Java-based environment, including PCs, Macs, and supercomputers. The number of tools is expected to grow. One tool (called cmsearch.hadoop or cmsearch.local), calls the external cmsearch program to predict non-coding RNA in a genome. The cmsearch program is part of the third-party Infernal package. Omics Tools does not contain Infernal. Infernal may be installed separately. The cmsearch.hadoop subtool requires Apache Hadoop and runs on a supercomputer, though cmsearch.local does not and runs on a server. Omics Tools does not contain Hadoop. Hadoop mat be installed separartely The other tools (cmgbk, cmgff, fastats, pal, randgrp, randgrpr, randsub) do not interface with third-party tools. Omics Tools is written in Java and Scala programming languages. Invoking the “help” command shows currently available tools, as shown below: schaumbe@gpint06:~/proj/omics$ java -jar omics.jar help Known commands are: cmgbk : compare cmsearch and GenBank Infernal hits cmgff : compare hits among two GFF (version 3) files cmsearch.hadoop : find Infernal hits in a genome, on your supercomputer cmsearch.local : find Infernal hits in a genome, on your workstation fastats : FASTA stats, e.g. # bases, GC content pal : stem-loop motif detection by palindromic sequence search (code stub) randgrp : random subsample without replacement, of groups randgrpr : random subsample with replacement, of groups (fast) randsub : random subsample without replacement, of file lines For more help regarding a particular command, use: java -jar omics.jar command help Usage: java -jar omics.jar command args

  16. Omics Tools

    Energy Science and Technology Software Center

    2012-12-21

    The Omics Tools package provides several small trivial tools for work in genomics. This single portable package, the “omics.jar” file, is a toolbox that works in any Java-based environment, including PCs, Macs, and supercomputers. The number of tools is expected to grow. One tool (called cmsearch.hadoop or cmsearch.local), calls the external cmsearch program to predict non-coding RNA in a genome. The cmsearch program is part of the third-party Infernal package. Omics Tools does not containmore » Infernal. Infernal may be installed separately. The cmsearch.hadoop subtool requires Apache Hadoop and runs on a supercomputer, though cmsearch.local does not and runs on a server. Omics Tools does not contain Hadoop. Hadoop mat be installed separartely The other tools (cmgbk, cmgff, fastats, pal, randgrp, randgrpr, randsub) do not interface with third-party tools. Omics Tools is written in Java and Scala programming languages. Invoking the “help” command shows currently available tools, as shown below: schaumbe@gpint06:~/proj/omics$ java -jar omics.jar help Known commands are: cmgbk : compare cmsearch and GenBank Infernal hits cmgff : compare hits among two GFF (version 3) files cmsearch.hadoop : find Infernal hits in a genome, on your supercomputer cmsearch.local : find Infernal hits in a genome, on your workstation fastats : FASTA stats, e.g. # bases, GC content pal : stem-loop motif detection by palindromic sequence search (code stub) randgrp : random subsample without replacement, of groups randgrpr : random subsample with replacement, of groups (fast) randsub : random subsample without replacement, of file lines For more help regarding a particular command, use: java -jar omics.jar command help Usage: java -jar omics.jar command args« less

  17. GCAM Bioenergy and Land Use Modeling

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    GCAM Bioenergy and Land Use Modeling March 25, 2015 Analysis and Sustainability PI: Marshall Wise Pacific Northwest National Laboratory This presentation does not contain any proprietary, confidential, or otherwise restricted information Goal Statement Support BETO Analysis and Sustainability goals by studying bioenergy production and use in a systems and economic context of US and global energy, agriculture, land use, and emissions. MYPP goal: Develop and maintain analytical tools, models,

  18. Regulatory Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Regulatory Tools Home CRA - 2004 Final Recertification Decision CRA Comments & Responses CCA - 1996 CRA CARDs & TSDs CCA CARDs & TSDs Regulatory Tools Title 40 CFR Part 191 Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes. Title 40 CFR Part 194 Criteria for the Certification and Re-Certification of the Waste Isolation Pilot Plant's Compliance With the 40 CFR Part 191 Disposal Regulations.

  19. Software Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Software Tools Software Tools Copyright materials are released under different mechanisms: Open Source Software and Portfolio Software. CONTACT thumbnail of Kathleen McDonald Head of Intellectual Property, Business Development Executive Kathleen McDonald Richard P. Feynman Center for Innovation (505) 665-9090 Email The Richard P. Feynman Center for Innovation (FCI) releases copyright materials from Los Alamos under different mechanisms. Open Source Software GitHub Explore all open source

  20. Interim reclamation report, Basalt Waste Isolation Project Near Surface Test Facility 1990

    SciTech Connect

    Brandt, C.A.; Rickard, W.H. Jr.; Hefty, M.G.; Cadoret, N.A.

    1991-01-01

    This report describes the development of the reclamation project for the Hanford Site Near Surface Test Facility (NSTF), its implementation, and preliminary estimates of its success. The goal of the reclamation project is to return disturbed sites as nearly as practicable to their original conditions using native species. Gable Mountain is dominated by two plant communities: a big sagebrush (Artemisia tridentata) -- Sandberg's bluegrass (Poa sandbergii) community and a stiff sagebrush (Artemisia rigida) -- Sandberg's bluegrass community. Disassembly of the site installations began on March 15, 1988, and the site was returned to original contours by December 12, 1988. Two separate revegetation methods were employed at the NSTF to meet differing site constraints. Vegetative cover and density in the revegetation plots were assessed in April 1989 and again in June 1989 and 1990. It is extremely unlikely that the sand pit, borrow pit, box cuts, generator pad area, or ventilation fan area will reach the reclamation objectives set for these areas within the next 50 years without further intervention. These areas currently support few living plants. Vegetation on revegetated native soils appears to be growing as expected. Vegetation growth on the main waterline is well below the objective. To date, no shrubs have grown on the area, growth of native grasses is well below the objective, and much of the area has been covered with the pit run material, which may not support adequate growth. Without further treatments, the areas without the pit run material will likely revert to a nearly pure cheatgrass condition. 44 refs., 13 figs., 7 tabs.

  1. Scratching the surface: State implementation of the Surface Mining Reclamation and Control Act

    SciTech Connect

    Scheberle, D.L.

    1991-01-01

    The implementation of the Surface Mining Reclamation and Control Act of 1977 has been criticized as sporadic, lackluster, and dependent upon the political proclivities of primacy states. This dissertation explores the effect of national-level and state-level variables on implementation patterns in Colorado, Wyoming, and Virginia. Surveys and personal interviews, combined with longitudinal analyses of implementation performances of the Office of Surface Mining and individual state agencies, provide the heart of the research data. The research findings suggest the importance of considering state variables when explaining implementation performance. Moreover, support for both national and state variables as important determinants of the implementation process are provided by the research results.

  2. CLEAP_Tools_v2016-3

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Land Use Transportation Generation Industrial Commercial Residential CITY-LEVEL TOOLS BY SECTOR Plenar.io Zoning Check Climate Explorer Smart Location Database Coastal Resilience Mapping Tool National Climate Change Viewer Open Street Map Alternative Fueling Station Locator US DOT Infrastructure Carbon Estimator Long Range Energy Alternatives Planning System SLED Better Buildings Toolkit Regional Indicators Initiative TRACE BEPTC The Energy & Emissions Reduction Policy Analysis Tool I-Places

  3. Final Hanford Comprehensive Land-Use Plan Environmental Impact Statement (9/22/1999)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EIS Summary Cover Sheet 1 2 3 Lead Federal Agency: U.S. Department of Energy (DOE) 4 5 Cooperating Agencies: U.S. Department of the Interior (Bureau of Land Management, Bureau 6 of Reclamation, and U.S. Fish and Wildlife Service); Benton, Franklin, and Grant counties; and 7 the City of Richland, Washington 8 | 9 Consulting Tribal Governments: Nez Perce Tribe Department of Environmental Restoration 10 and Waste Management and the Confederated Tribes of the Umatilla Indian Reservation 11 12 Title:

  4. Archaeology on Lab Land

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Archaeology on Lab Land Archaeology on Lab Land People have lived in this area for more than 5,000 years. Lab archaeologists are studying and preserving the ancient human occupation of the Pajarito Plateau. Archaeology on Lab Land exhibit Environmental Research & Monitoring Visit our exhibit and find out how Los Alamos researchers are studying our rich cultural diversity. READ MORE Nake'muu archaeological site Unique Archaeology The thousands of Ancestral Pueblo sites identified on Lab land

  5. Downhole tool

    DOEpatents

    Hall, David R.; Muradov, Andrei; Pixton, David S.; Dahlgren, Scott Steven; Briscoe, Michael A.

    2007-03-20

    A double shouldered downhole tool connection comprises box and pin connections having mating threads intermediate mating primary and secondary shoulders. The connection further comprises a secondary shoulder component retained in the box connection intermediate a floating component and the primary shoulders. The secondary shoulder component and the pin connection cooperate to transfer a portion of makeup load to the box connection. The downhole tool may be selected from the group consisting of drill pipe, drill collars, production pipe, and reamers. The floating component may be selected from the group consisting of electronics modules, generators, gyroscopes, power sources, and stators. The secondary shoulder component may comprises an interface to the box connection selected from the group consisting of radial grooves, axial grooves, tapered grooves, radial protrusions, axial protrusions, tapered protrusions, shoulders, and threads.

  6. Livestock impacts for management of reclaimed land at Navajo Mine: Vegetation responses

    SciTech Connect

    Wood, M.K.; Buchanan, B.A.; Estrada, O.

    1997-12-31

    The post-mining land use for Navajo Mine, a large surface coal mine in northwest New Mexico, is livestock grazing. Reclamation began in the early 1970`s and has been primarily directed toward the development of a grassland with shrubs. However, none of these lands were grazed before 1994 and none have been released back to the Navajo Nation. Therefore, it is not known how these reclaimed lands will respond to livestock impacts once the lands are released. Livestock impacts include grazing, trampling, and adding feces and urine. Cattle impacts were applied in 1994 to a land that had been reclaimed in 1978, 1991 and 1992. Vegetation monitoring procedures were implemented to detect and document successful and unsuccessful impact practices for both impacted areas and areas excluded from cattle. After three impact seasons, there were similar levels of perennial plant cover, production, and density on impacted lands compared to excluded lands. Based on age structure analysis, there is a trend that establishment of seedlings is stimulated by cattle. Cattle also decrease the amount of previous years` growth of standing phytomass with a trend to stimulate new growth. It is possible that some of the previous year`s growth was reduced by cattle trampling as much as by grazing because cattle generally prefer to eat the current year`s growth before it cures. No differences in number of seedheads per plant, animal sign, plant pedestals, and soil rills could be detected after three seasons of impacting.

  7. Case Studies of Potential Facility-Scale and Utility-Scale Non-Hydro Renewable Energy Projects across Reclamation

    SciTech Connect

    Haase, S.; Burman, K.; Dahle, D.; Heimiller, D.; Jimenez, A.; Melius, J.; Stoltenberg, B.; VanGeet, O.

    2013-05-01

    This report summarizes the results of an assessment and analysis of renewable energy opportunities conducted for the U.S. Department of the Interior, Bureau of Reclamation by the National Renewable Energy Laboratory. Tasks included assessing the suitability for wind and solar on both a utility and facility scale.

  8. Surface mining: State management of abandoned mine land funds

    SciTech Connect

    Not Available

    1987-01-01

    The Surface Mining Control and Reclamation Act of 1977 promotes the reclamation of areas severely damaged in the past by coal mining operations. GAO reviewed the reclamation programs in Colorado, Kentucky, Pennsylvania, West Virginia, and Wyoming and found that they implemented financial control procedures and practices to ensure that the expenditures of reclamation funds are proper. Only one state, however, is complying with all related grant payment, audit, and inventory requirements. The states are generally reclaiming eligible, high priority projects as required under the act and are managing their reclamation projects in compliance with federal requirements.

  9. Reclamation of greater than Class C sealed sources at the Los Alamos National Laboratory

    SciTech Connect

    Behrens, R.G.; Jones, S.W.

    1995-02-01

    One of the important overriding themes of the Los Alamos National Laboratory as a world-class scientific institution is to utilize its expertise in enhancing the long-term welfare of society by minimizing negative side effects of nuclear technology over the past five decades. The Los Alamos National Laboratory is therefore committed to the use of its technical competencies and nuclear facilities, developed through programs in the areas of defense and civilian nuclear research, to support activities which will benefit the United States as a whole. As such, this paper discusses the organizational details and requirements of the Neutron Source Reclamation Program at Los Alamos. This program has as its mission the retrieval, interim storage, and chemical reprocessing of {sup 238}PuBe, {sup 239}PuBe and {sup 24l}AmBe neutron sources residing in the hands of private companies and industries, academic institutions, and various state and Federal government agencies.

  10. Desalting in wastewater reclamation using capacitive deionization with carbon aerogel electrodes

    SciTech Connect

    Richardson, J.H.; Farmer, J.C.; Fix, D.V.; de Pruneda, J.A.H.; Mack, G.V.; Poco, J.F.; Nielsen, J.K.; Pekala, R.W.

    1996-07-01

    Capacitive deionization with carbon aerogel electrodes is an efficient and economical new process for removing salt and impurities from water. Carbon aerogel is a material that enables the successful purification of water because of its high surface area, optimum pore size, and low electrical resistivity. The electrodes are maintained at a potential difference of about one volt; ions are removed from the water by the imposed electrostatic field and retained on the electrode surface until the polarity is reversed. The capacitive deionization of water with a stack of carbon aerogel electrodes has been successfully demonstrated. The overall process offers advantages when compared to conventional water-purification methods, requiring neither pumps, membranes, distillation columns, nor thermal heaters. Consequently, the overall process is both robust and energy efficient. The current state of technology development commercialization, and potential applications of this process are reviewed. Particular attention and comparison with alternate technologies will be done for seawater, brackish water, and desalting in wastewater reclamation.

  11. Assessing the impacts of the Surface Mining Control and Reclamation Act

    SciTech Connect

    Desai, U.

    1989-01-01

    Even a dozen years since the passage of the Surface Mining Control and Reclamation Act (SMCRA) there is little agreement on how well it has worked. The paper attempts to assess the impacts of SMCRA in six major surface coal producing states. Although it is not possible to make an unqualified overall national assessment, the evidence presented in the paper indicates that in many (but by no means all) cases, surface coal mining is now carried out in environmentally less destructive ways then before the Act. However, the accomplishments have fallen far short of expectations. The situation in some states has gotten worse than before the Act. Overall, the impact of the Act on the ground has been mixed and has depended on the rigor with which the Act has been implemented in individual coal states.

  12. State implementation of the Surface Mining Control and Reclamation Act of 1977

    SciTech Connect

    Davis, C.E.; Davis, S.K.; Peacock, D.

    1989-01-01

    The implementation of the Surface Mining Control and Reclamation Act (SMCRA) of 1977 in coal producing states is guided by a partial preemption policy approach that establishes a balance between federal and state decision-making authority. The usefulness of this approach is assessed by analyzing state enforcement actions in relation the institutional capacity of states to shoulder regulatory responsibilities and the propensity of the federal Office of Surface Mining (OSM) to oversee state enforcement actions and, if necessary, to undertake corrective action. The authors results indicated that state administration of SMCRA was constrained by the lack of effective federal oversight but was largely unaffected by interstate differences in political, economic, or administrative characteristics.

  13. Hierarchical Marginal Land Assessment for Land Use Planning

    SciTech Connect

    Kang, Shujiang; Post, Wilfred M; Wang, Dali; Nichols, Dr Jeff A; Bandaru, Vara Prasad

    2013-01-01

    Marginal land provides an alternative potential for food and bioenergy production in the face of limited land resources; however, effective assessment of marginal lands is not well addressed. Concerns over environmental risks, ecosystem services and sustainability for marginal land have been widely raised. The objective of this study was to develop a hierarchical marginal land assessment framework for land use planning and management. We first identified major land functions linking production, environment, ecosystem services and economics, and then classified land resources into four categories of marginal land using suitability and limitations associated with major management goals, including physically marginal land, biologically marginal land, environmental-ecological marginal land, and economically marginal land. We tested this assessment framework in south-western Michigan, USA. Our results indicated that this marginal land assessment framework can be potentially feasible on land use planning for food and bioenergy production, and balancing multiple goals of land use management. We also compared our results with marginal land assessment from the Conservation Reserve Program (CRP) and land capability classes (LCC) that are used in the US. The hierarchical assessment framework has advantages of quantitatively reflecting land functions and multiple concerns. This provides a foundation upon which focused studies can be identified in order to improve the assessment framework by quantifying high-resolution land functions associated with environment and ecosystem services as well as their criteria are needed to improve the assessment framework.

  14. Interactive Activity Detection Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Activity Detection Tools Interactive Activity Detection Tools Tools for detecting specified activities in video data provide a key intelligence capability. High numbers of false ...

  15. Tools for Public Information

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tools for Public Information Tools for Public Information A list of resources for the public, including Intellus, an online tool that provides transparency and accessibility to the ...

  16. Assessment of landfill reclamation and the effects of age on the combustion of recovered municipal solid waste

    SciTech Connect

    Forster, G A

    1995-01-01

    This report summarized the Lancaster county Solid Waste Management Authorities`s (LCSWMA)landfill reclamation activities, ongoing since 1991. All aspects have been analyzed from the manpower and equipment requirements at the landfill to the operational impacts felt at the LCSWMA Resource Recovery Facility (RRF) where the material is delivered for processing. Characteristics of the reclaimed refuse and soil recovered from trommeling operations are discussed as are results of air monitoring performed at the landfill excavation site and the RRF. The report also discusses the energy value of the reclaimed material and compares this value with those obtained for significantly older reclaimed waste streams. The effects of waste age on the air emissions and ash residue quality at the RRF are also provided. The report concludes by summarizing the project benefits and provides recommendations for other landfill reclamation operations and areas requiring further research.

  17. Long-Term Surveillance Plan for the Sherwood Project (UMTRCA Title II) Reclamation Cell, Wellpinit, Washington, February 2001

    Office of Legacy Management (LM)

    Program Long-Term Surveillance Plan for the DOE Sherwood Project (UMTRCA Title II) Reclamation Cell Wellpinit, Washington February 2001 Prepared by U.S. Department of Energy Grand Junction Office Grand Junction, Colorado Work Performed Under DOE Contract Number DE-AC13-96GJ87335 Task Order Number MAC 01-06 Document Number S00204 DOE/Grand Junction Office Sherwood LTSP February 2001 Page iii Contents 1.0

  18. how much land | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    how much land Home Sfomail's picture Submitted by Sfomail(48) Member 25 June, 2013 - 12:10 Solar Land Use Data on OpenEI acres csp land use how much land land requirements pv land...

  19. csp land use | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    csp land use Home Sfomail's picture Submitted by Sfomail(48) Member 25 June, 2013 - 12:10 Solar Land Use Data on OpenEI acres csp land use how much land land requirements pv land...

  20. Built Environment Energy Analysis Tool Overview (Presentation)

    SciTech Connect

    Porter, C.

    2013-04-01

    This presentation provides an overview of the Built Environment Energy Analysis Tool, which is designed to assess impacts of future land use/built environment patterns on transportation-related energy use and greenhouse gas (GHG) emissions. The tool can be used to evaluate a range of population distribution and urban design scenarios for 2030 and 2050. This tool was produced as part of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

  1. Bureau of Land Management - Land Use Planning Handbook | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    to library PermittingRegulatory Guidance - GuideHandbook: Bureau of Land Management - Land Use Planning HandbookPermittingRegulatory GuidanceGuideHandbook Abstract...

  2. Colorado State Land Board Land Survey Requirements | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Colorado State Land Board Land Survey Requirements Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: Colorado...

  3. Hawaii Land Study Bureau's Land Classification Finder | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Not Provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Hawaii Land Study Bureau's Land Classification Finder Citation Hawaii State...

  4. Land-Use Change Data Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Office (BETO) 2015 Project Peer Review 4.1.2.40 Land-Use Change Data Analysis 03/25/2015 Analysis & Sustainability Nagendra Singh (PI) Keith Kline, Rebecca Efroymson, Raju Vatsavai, Huina Mao, Erica Pham, Budhendra Bhaduri. Oak Ridge National Laboratory This presentation does not contain any proprietary, confidential, or otherwise restricted information 2 Presentation name Goal Statement Project Goal Design and develop scalable tools and assessment methods to establish scientific basis for

  5. Uni Land | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    search Name: Uni Land Place: Bologna, Italy Zip: 40063 Sector: Solar Product: Italian property company, which buys land without permits and develops it for residential and...

  6. Regeneration of kaolin mined lands to maximize loblolly pine growth and wildlife habitat

    SciTech Connect

    McEvoy, K.E.; Morris, L.A.; Hendrick, R.L.; Ogden, E.A.

    1999-07-01

    Compliance with the Surface Mining Control and Reclamation Act of 1977 and Georgia Surface Mining Act of 1968 requires that land equal in area to each year's disturbance by reclaimed and a vegetative cover established. Approximately 60% of kaolin mined areas are reclaimed to pine forest. Current methods of reclamation after grading involve fertilization, seeding with a cover crop of grass and legumes, followed by planting of tree seedlings. Restrictive soil physical conditions, a lack of organic matter and nutrients, and competition by cover crop species can reduce survival and growth of loblolly pine seedlings. Also, current cover crop species have only marginal value for wildlife. In this research, the authors evaluated alternative methods of reforestation that (1) control erosion while providing greater benefits for wildlife and reduced competition with loblolly pine seedlings, (2) ameliorate adverse soil physical conditions through deeper tillage (subsoiling vs. disk harrowing), and (3) improve spoil fertility and structure by application of a composted paper mill by-product. Results from field trials indicate control of erosion by wildlife grasses is comparable to seed mixtures currently used in the industry. Subsoiling and disking both had ameliorative effects on soil physical properties with seedling survival at 92% and 88% respectively, compared to 45% of the surrounding area. Composted paper mill by-product served as an additional source of organic matter, nutrients, and protective mulch, thereby enhancing seedling growth as well as ameliorating pine seedlings mulched with the paper mill compost was greater than twice the size of seedlings grown under current reclamation practices.

  7. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    SciTech Connect

    Jonathan Aggett

    2003-12-15

    The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. In this segment of work, our goal was to review methods for estimating tree survival, growth, yield and value of forests growing on surface mined land in the eastern coalfields of the USA, and to determine the extent to which carbon sequestration is influenced by these factors. Public Law 95-87, the Surface Mining Control and Reclamation Act of 1977 (SMCRA), mandates that mined land be reclaimed in a fashion that renders the land at least as productive after mining as it was before mining. In the central Appalachian region, where prime farmland and economic development opportunities for mined land are scarce, the most practical land use choices are hayland/pasture, wildlife habitat, or forest land. Since 1977, the majority of mined land has been reclaimed as hayland/pasture or wildlife habitat, which is less expensive to reclaim than forest land, since there are no tree planting costs. As a result, there are now hundreds of thousands of hectares of grasslands and scrublands in various stages of natural succession located throughout otherwise forested mountains in the U.S. A literature review was done to develop the basis for an economic feasibility study of a range of land-use conversion scenarios. Procedures were developed for both mixed hardwoods and white pine under a set of low product prices and under a set of high product prices. Economic feasibility is based on land expectation values. Further, our review shows that three types of incentive schemes might be important: (1) lump sum payment at planting (and equivalent series of annual payments); (2) revenue incentive at harvest; and (3) benefit based on carbon volume.

  8. Proposed Conveyance of Land

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Conveyance of Land at the Hanford Site, Richland, WA Public Scoping Fact Sheet The U.S. Department of Energy (DOE) is seeking input for a National Environmental Policy Act (NEPA) Environmental Assessment (EA) to assess the potential environmental effects of conveying approximately 1,641 acres of Hanford Site land to a local economic development organization (https://federalregister.gov/a/2012-23099). The Tri-City Development Council (TRIDEC), a DOE-recognized Community Reuse Organization

  9. Interior Board of Land Appeals | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Shelf, and the conduct of surface coal mining operations under the Surface Mining Control and Reclamation Act. Located within the Department's Office of Hearings and Appeals,...

  10. Land use and energy (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    the National Environmentalmore Protection Act, Clean Air Act, Federal Water Pollution Control Act, Surface Mining Control and Reclamation Act, and Coastal Zone Management Act. ...

  11. ARM - Evaluation Product - Critical soil quantities for describing land

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    properties ProductsCritical soil quantities for describing land properties ARM Data Discovery Browse Data Documentation Use the Data File Inventory tool to view data availability at the file level. Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Critical soil quantities for describing land properties The ARMBELAND is a subset of the ARM Best Estimate (ARMBE) products for supporting community land-atmospheric research and

  12. Energy and land use

    SciTech Connect

    Not Available

    1981-12-01

    This report addresses the land use impacts of past and future energy development and summarizes the major federal and state legislation which influences the potential land use impacts of energy facilities and can thus influence the locations and timing of energy development. In addition, this report describes and presents the data which are used to measure, and in some cases, predict the potential conflicts between energy development and alternative uses of the nation's land resources. The topics section of this report is divided into three parts. The first part describes the myriad of federal, state and local legislation which have a direct or indirect impact upon the use of land for energy development. The second part addresses the potential land use impacts associated with the extraction, conversion and combustion of energy resources, as well as the disposal of wastes generated by these processes. The third part discusses the conflicts that might arise between agriculture and energy development as projected under a number of DOE mid-term (1990) energy supply and demand scenarios.

  13. Future land use plan

    SciTech Connect

    1995-08-31

    The US Department of Energy`s (DOE) changing mission, coupled with the need to apply appropriate cleanup standards for current and future environmental restoration, prompted the need for a process to determine preferred Future Land Uses for DOE-owned sites. DOE began the ``Future Land Use`` initiative in 1994 to ensure that its cleanup efforts reflect the surrounding communities` interests in future land use. This plan presents the results of a study of stakeholder-preferred future land uses for the Brookhaven National Laboratory (BNL), located in central Long Island, New York. The plan gives the Laboratory`s view of its future development over the next 20 years, as well as land uses preferred by the community were BNL ever to cease operations as a national laboratory (the post-BNL scenario). The plan provides an overview of the physical features of the site including its history, topography, geology/hydrogeology, biological inventory, floodplains, wetlands, climate, and atmosphere. Utility systems and current environmental operations are described including waste management, waste water treatment, hazardous waste management, refuse disposal and ground water management. To complement the physical descriptions of the site, demographics are discussed, including overviews of the surrounding areas, laboratory population, and economic and non-economic impacts.

  14. Land-use Leakage

    SciTech Connect

    Calvin, Katherine V.; Edmonds, James A.; Clarke, Leon E.; Bond-Lamberty, Benjamin; Kim, Son H.; Wise, Marshall A.; Thomson, Allison M.; Kyle, G. Page

    2009-12-01

    Leakage occurs whenever actions to mitigate greenhouse gas emissions in one part of the world unleash countervailing forces elsewhere in the world so that reductions in global emissions are less than emissions mitigation in the mitigating region. While many researchers have examined the concept of industrial leakage, land-use policies can also result in leakage. We show that land-use leakage is potentially as large as or larger than industrial leakage. We identify two potential land-use leakage drivers, land-use policies and bioenergy. We distinguish between these two pathways and run numerical experiments for each. We also show that the land-use policy environment exerts a powerful influence on leakage and that under some policy designs leakage can be negative. International offsets are a potential mechanism to communicate emissions mitigation beyond the borders of emissions mitigating regions, but in a stabilization regime designed to limit radiative forcing to 3.7 2/m2, this also implies greater emissions mitigation commitments on the part of mitigating regions.

  15. International land Model Benchmarking (ILAMB) Package v002.00

    DOE Data Explorer

    Collier, Nathaniel [Oak Ridge National Laboratory; Hoffman, Forrest M. [Oak Ridge National Laboratory; Mu, Mingquan [University of California, Irvine; Randerson, James T. [University of California, Irvine; Riley, William J. [Lawrence Berkeley National Laboratory

    2016-05-09

    As a contribution to International Land Model Benchmarking (ILAMB) Project, we are providing new analysis approaches, benchmarking tools, and science leadership. The goal of ILAMB is to assess and improve the performance of land models through international cooperation and to inform the design of new measurement campaigns and field studies to reduce uncertainties associated with key biogeochemical processes and feedbacks. ILAMB is expected to be a primary analysis tool for CMIP6 and future model-data intercomparison experiments. This team has developed initial prototype benchmarking systems for ILAMB, which will be improved and extended to include ocean model metrics and diagnostics.

  16. International land Model Benchmarking (ILAMB) Package v001.00

    DOE Data Explorer

    Mu, Mingquan [University of California, Irvine; Randerson, James T. [University of California, Irvine; Riley, William J. [Lawrence Berkeley National Laboratory; Hoffman, Forrest M. [Oak Ridge National Laboratory

    2016-05-02

    As a contribution to International Land Model Benchmarking (ILAMB) Project, we are providing new analysis approaches, benchmarking tools, and science leadership. The goal of ILAMB is to assess and improve the performance of land models through international cooperation and to inform the design of new measurement campaigns and field studies to reduce uncertainties associated with key biogeochemical processes and feedbacks. ILAMB is expected to be a primary analysis tool for CMIP6 and future model-data intercomparison experiments. This team has developed initial prototype benchmarking systems for ILAMB, which will be improved and extended to include ocean model metrics and diagnostics.

  17. land requirements | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    land requirements Home Sfomail's picture Submitted by Sfomail(48) Member 25 June, 2013 - 12:10 Solar Land Use Data on OpenEI acres csp land use how much land land requirements pv...

  18. Preset pivotal tool holder

    DOEpatents

    Asmanes, Charles

    1979-01-01

    A tool fixture is provided for precise pre-alignment of a radiused edge cutting tool in a tool holder relative to a fixed reference pivot point established on said holder about which the tool holder may be selectively pivoted relative to the fixture base member to change the contact point of the tool cutting edge with a workpiece while maintaining the precise same tool cutting radius relative to the reference pivot point.

  19. Software and Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Euclid that is managed by modules. Package Category Version Module Install Date Date Made ...

  20. Rotor Design Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Design Tools - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee ... Multimedia & Software Videos Images Models & Tools Partnerships Tribal Energy Program ...

  1. H.R. 2372: A Bill to the Surface Mining Control and Reclamation Amendments Act of 1995. Introduced in the House of Representatives, One Hundred Fourth Congress, First session

    SciTech Connect

    1995-12-31

    This report discusses a bill to amend the Surface Mining Control and Reclamation Act of 1977 to minimize duplication in regulatory programs and to give States exclusive responsibility under approved States program for permitting and enforcement of the provisions of that Act with respect to surface coal mining and reclamation operations, and for other purposes.

  2. Navajo-Hopi Land Commission

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Renewable Power at the Paragon-Bisti Ranch DOE TEP Review, Golden, CO May 7, 2015   THE NAVAJO-HOPI LAND SETTLEMENT ACT  Navajo-Hopi Land Settlement Act passed 1974  Required relocation of Navajo and Hopi families living on land partitioned to other tribe.  Set aside lands for the benefit of relocates  Proceeds from RE development for Relocatee Project Background   Paragon-Bisti Ranch is selected lands :  Located in northwestern New Mexico.  22,000 acres of land

  3. ARM - Metadata Management Tool

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    FormsMetadata Management Tool Ingest Ingest Workflow Graphic Supporting Workflow Documentation Supporting Tools and Forms Process Configuration Manager (PCM) Metadata Management Tool (MMT) ARM Data Integrator (ADI) Ingest Readiness Form Associated Status Reports Contacts Engineering Processes Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field Campaign Startup Metadata

  4. Bureau of Land Management - Land Use Planning | Open Energy Informatio...

    OpenEI (Open Energy Information) [EERE & EIA]

    Planning Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Bureau of Land Management - Land Use Planning Abstract The BLM's Resource Management Plans...

  5. Performance and Debugging Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Performance and Debugging Tools Performance and Debugging Tools NERSC provides many popular debugging and profiling tools. Some of them are general-purpose tools and others are geared toward more specific tasks. A quick guideline on when to use which debugging tool is as follows: DDT and TotalView: general purpose parallel debuggers allowing users to interactively control the pace of execution of a program using a graphical user interface gdb: serial command line mode debugger; can be useful in

  6. Performance and Debugging Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tools Performance and Debugging Tools NERSC provides many popular debugging and profiling tools. Some of them are general-purpose tools and others are geared toward more specific tasks. A quick guideline on when to use which debugging tool is as follows: DDT and TotalView: general purpose parallel debuggers allowing users to interactively control the pace of execution of a program using a graphical user interface gdb: serial command line mode debugger; can be useful in quickly examining core

  7. Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Information Resources » Tools Tools Below are links to tools that assist users with project planning and analysis. Spectrally Enhanced Lighting Spectrally Enhanced Lighting (SEL) is a cost-effective, low-risk design method for achieving significant energy savings by shifting lamp color from the warmer to the cooler (whiter) end of the color spectrum, more closely matching daylight. Residential Lighting Usage Estimate Tool The Residential Lighting Usage Estimate Tool is a companion to the

  8. Interactive Activity Detection Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Activity Detection Tools Interactive Activity Detection Tools Tools for detecting specified activities in video data provide a key intelligence capability. High numbers of false alarms, however, reduce tool effectiveness and analyst patience. User feedback reduces false alarms * This project will reduce the number of false alarms generated by activity detection tools (including single vehicle start / stop, multi-vehicle meetings and coordinated driving patterns) by exploiting user feedback in a

  9. Electrochromic Window Demonstration- Donna Land Port of Entry

    Energy.gov [DOE]

    Donna Project Plan: Electrochrome Window Demonstration Measurement and Verification Report This report details the measurement and verification tools and methods used to evaluate the effectiveness of electrochromic windows at the Donna Land Port of Entry, an international border crossing between the United States and Mexico located in Texas.

  10. Texas General Land Office | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Land Office Jump to: navigation, search Logo: Texas General Land Office Name: Texas General Land Office Address: 1700 Congress Ave Place: Austin, Texas Zip: 78701 Website:...

  11. California State Lands Commission | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Lands Commission Jump to: navigation, search Logo: California State Lands Commission Name: California State Lands Commission Abbreviation: CSLC Address: 100 Howe Ave., Suite 100...

  12. Improved tool grinding machine

    DOEpatents

    Dial, C.E. Sr.

    The present invention relates to an improved tool grinding mechanism for grinding single point diamond cutting tools to precise roundness and radius specifications. The present invention utilizes a tool holder which is longitudinally displaced with respect to the remainder of the grinding system due to contact of the tool with the grinding surface with this displacement being monitored so that any variation in the grinding of the cutting surface such as caused by crystal orientation or tool thicknesses may be compensated for during the grinding operation to assure the attainment of the desired cutting tool face specifications.

  13. Tool grinding machine

    DOEpatents

    Dial, Sr., Charles E.

    1980-01-01

    The present invention relates to an improved tool grinding mechanism for grinding single point diamond cutting tools to precise roundness and radius specifications. The present invention utilizes a tool holder which is longitudinally displaced with respect to the remainder of the grinding system due to contact of the tool with the grinding surface with this displacement being monitored so that any variation in the grinding of the cutting surface such as caused by crystal orientation or tool thickness may be compensated for during the grinding operation to assure the attainment of the desired cutting tool face specifications.

  14. Structural Health Monitoring Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... that support the SHM process, e.g. sensor diagnostic and optimal sensor placement tools. ... document FunctionLibrary.pdf serves as a central "help" file for all SHM- Tools functions. ...

  15. ARM - Data Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    govDataData Tools Data Tools Software for Working with ARM NetCDF Data Most ARM data are archived and made available as time-series data in netCDF format. NetCDF (designed by ...

  16. Structural Health Monitoring Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... implementing algorithms that support the SHM process, e.g. sensor diagnostic tools. ... document FunctionLibrary.pdf serves as a central "help" file for all SHM- Tools functions. ...

  17. ARM - Data Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    govData Tools Data Tools Software for Working with ARM NetCDF Data Most ARM data are archived and made available as time-series data in netCDF format. NetCDF (designed by Unidata) ...

  18. Software and Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Euclid that is managed by modules. Package Category Version Module Install Date Date Made Default Last edited: 2016-03-21 13:44:49

  19. Caliper and contour tool

    DOEpatents

    Fink, Conrad F. (Los Alamos, NM)

    1981-01-01

    The disclosure relates to a tool for borehole logging comprising a plurality of extendable caliper arms to determine borehole contour.

  20. Caliper and contour tool

    DOEpatents

    Fink, C.F.

    The disclosure relates to a tool for borehole logging comprising a plurality of extendable caliper arms to determine borehole contour.

  1. Demand Response Dispatch Tool

    SciTech Connect

    2012-08-31

    The Demand Response (DR) Dispatch Tool uses price profiles to dispatch demand response resources and create load modifying profiles. These annual profiles are used as inputs to production cost models and regional planning tools (e.g., PROMOD). The tool has been effectively implemented in transmission planning studies conducted by the Western Electricity Coordinating Council via its Transmission Expansion Planning and Policy Committee. The DR Dispatch Tool can properly model the dispatch of DR resources for both reliability and economic conditions.

  2. OOTW COST TOOLS

    SciTech Connect

    HARTLEY, D.S.III; PACKARD, S.L.

    1998-09-01

    This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

  3. Fluid sampling tool

    DOEpatents

    Garcia, Anthony R.; Johnston, Roger G.; Martinez, Ronald K.

    2000-01-01

    A fluid-sampling tool for obtaining a fluid sample from a container. When used in combination with a rotatable drill, the tool bores a hole into a container wall, withdraws a fluid sample from the container, and seals the borehole. The tool collects fluid sample without exposing the operator or the environment to the fluid or to wall shavings from the container.

  4. Coal mining and the environment: Does SMCRA give regulators appropriate enforcement tools?

    SciTech Connect

    Shea, C.W.

    1994-12-31

    The Surface Mining Control and Reclamation Act of 1977 (SMCRA), 30 U.S.C. 1201 et seq (1990), reshaped the regulation of coal mining and affored government regulators a comprehensive set of enforcement tools. Major controveries remain, such as the definitions haping the Application Violator System, and the extent of federal authority to oversee the states` primary enforcement responsibility. Despite these contentious issues the federal and state programs have fundamentally succeeded in enforcing SMCRA and have successfully altered the landscape of coal mining. The structure of SMCRA`s enforcement provisions is a critical factor in this success. The article discusses in more detain the following areas: the core of SMCRA: permits and Bonds; Maintaining Standards: inspections and sanction for noncompliance; the applicant violator system; other enforcement tools.

  5. Rich land Operations Office

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    TG Department of Energy Rich land Operations Office P.O. Box 550 AES Richland, Washington 99352 CERTIFIED MAIL NOV~ 2 10 2009 Mr. Gerald Pollet Heart of America Northwest 1314 N.E. 5 6 th Street Suite 100 Seattle, Washington 98105 Dear Mr. Pollet: FREEDOM OF INFORMATION ACT REQUEST (FOI 2009-0054) The purpose of this letter is to inform you that we have withdrawn our response dated September 14, 2009, and have issued the following determination regarding item 8 of your request. In response to

  6. Rich land Operations Office

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Rich land Operations Office P.O. Box 550 July 10, 2009 CERTIFIED MAIL Mr. Ryan Jarvis Heart of America Northwest 1314 N.E. 56h" Street Suite 100 Seattle, Washington 98105 Dear Mr. Jarvis: FREEDOM OF INFORMATION ACT REQUEST (FOI 2009-0054) Pursuant to the Freedom of Information Act (FOJA), you requested the following information as stated below: 1. "The RCRA permit (both Parts A and B) for the mixed waste disposal trenches 31 and 34 located in the 200 West area of Hanford, including,

  7. Federal-state relations in the implementation of the Surface Mining Control and Reclamation Act of 1977

    SciTech Connect

    Harris, R.A.

    1989-01-01

    The federal Surface Mining Control and Reclamation Act of 1977 not only established national performance standards and permitting procedures for the coal industry, but also provided for state primacy. The principle of state primacy is both simple and intuitively appealing. Because states do not have adequate resources to develop effective regulatory programs, the federal government would set up comprehensive procedures and criteria to guide the states in preparing their own plans. The obvious advantage of state primacy is that it provides for flexibility in implementation. Ultimately, state primacy is an experiment in cooperative federalism, a sharing of authority and responsibility between the states and the federal government to insure both the general welfare and sensitivity to local conditions. The history of surface mining regulation is instructive because it points out the pitfalls and promise of cooperative federalism as well as the critical role of the courts in making state primacy work.

  8. Walk-through survey report: Control technology for metal reclamation industries at East Penn Manufacturing Company Inc. , Lyon Station, Pennsylvania

    SciTech Connect

    Hall, R.M.

    1994-08-12

    A walk through survey was conducted at the East Penn Manufacturing Company (SIC-3341), Lyon Station, Pennsylvania to identify and evaluate potentially effective controls and work practices in the lead (7439921) reclamation industry. The facility was a secondary lead smelter which operated 7 days a week, and recycled about 20,000 batteries a day, primarily automobile batteries. The company employed automation, local exhaust ventilation, partial enclosures, and enclosed ventilation systems in the reverberatory furnace operations, blast furnace operations, and casting and refinery area to reduce employee exposure to lead. The arsenic (7440382) personal exposure time weighted averages ranged from 0.10 to 1.14 microg/cubic m in the industrial battery breaking area and ranged from nondetected to 6.16 microg/cubic m in the alloying/pots area.

  9. Tool setting device

    DOEpatents

    Brown, Raymond J.

    1977-01-01

    The present invention relates to a tool setting device for use with numerically controlled machine tools, such as lathes and milling machines. A reference position of the machine tool relative to the workpiece along both the X and Y axes is utilized by the control circuit for driving the tool through its program. This reference position is determined for both axes by displacing a single linear variable displacement transducer (LVDT) with the machine tool through a T-shaped pivotal bar. The use of the T-shaped bar allows the cutting tool to be moved sequentially in the X or Y direction for indicating the actual position of the machine tool relative to the predetermined desired position in the numerical control circuit by using a single LVDT.

  10. From land use to land cover: Restoring the afforestation signal...

    Office of Scientific and Technical Information (OSTI)

    ... Sponsoring Org: USDOE Country of Publication: United States Language: English Subject: 54 ENVIRONMENTAL SCIENCES earth system modeling; climate change; land use Word Cloud More ...

  11. S. 943: A Bill to amend the Surface Mining Control and Reclamation Act of 1977 to facilitate the use of abandoned mine reclamation fund moneys to replace water supplies that have been contaminated or diminished by coal mining practices. Introduced in the Senate of the United States, One Hundred First Congress, First Session, May 9, 1989

    SciTech Connect

    Not Available

    1989-01-01

    The bill describes mandatory and discretionary allocations of funds to a state or Indian reservation for the purpose of water reclamation. The stated objectives of the Surface Mining Control and Reclamation Act are amended to allow 50 percent of a state's mandatory allocation to be used for the construction of public water treatment plants and distribution facilities to take the place of water supplies that have been contaminated as a result of coal practices undertaken prior to August 3, 1977, regardless of whether the contamination has been exacerbated by coal mining practices since that date, when construction would be more economical than repair of existing facilities.

  12. Land Energy | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Energy Jump to: navigation, search Name: Land Energy Place: North Yorkshire, United Kingdom Zip: YO62 5DQ Sector: Biomass, Renewable Energy Product: A renewable-energy company...

  13. Alternative Fuels Data Center: Tools

    Alternative Fuels and Advanced Vehicles Data Center

    Tools to someone by E-mail Share Alternative Fuels Data Center: Tools on Facebook Tweet about Alternative Fuels Data Center: Tools on Twitter Bookmark Alternative Fuels Data Center: Tools on Google Bookmark Alternative Fuels Data Center: Tools on Delicious Rank Alternative Fuels Data Center: Tools on Digg Find More places to share Alternative Fuels Data Center: Tools on AddThis.com... Tools The Alternative Fuels Data Center offers a large collection of helpful tools. These calculators,

  14. Machine tool locator

    DOEpatents

    Hanlon, John A.; Gill, Timothy J.

    2001-01-01

    Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

  15. Tools - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tools About Us Hanford Site Solid Waste Acceptance Program What's New Acceptance Criteria Acceptance Process Tools Approved High Integrity Containers Disposal Information Points of Contact Tools Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Technical Information Disposal information - regulations and permit information regarding disposal of waste at the Hanford Site Waste Specification Records (WSRd) Approved High Integrity Containers Waste Storage and Disposal

  16. HPC_Tools.pptx

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    5, 2011 * Introduction * Debugging * Performance / Optimization Outline 3 * Scope of Today's Talks - Debugging and optimization tools - Some basic strategies * Take Aways - Common problems and strategies - How tools work in general - A few specific tools you can try Introduction 4 * Types of problems - "Serial" * Invalid memory references * Array reference out of bounds * Divide by zero * Uninitialized variables - Parallel * Unmatched sends/receives * Blocking receive before

  17. Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Windows and Building Envelope » Software Tools Software Tools See past projects. Fenestration Software Tools Lead Performer: Lawrence Berkeley National Laboratory - Berkeley, CA

  18. Wachs Cutter Tooling Station (4495)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    purchase, build and install Wachs cutter tooling. The Wachs Cutter Tooling Station is similar to previously operated facility tooling and will utilize an existing hydraulic unit....

  19. Double diameter boring tool

    DOEpatents

    Ashbaugh, Fred N.; Murry, Kenneth R.

    1988-12-27

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting edges formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first cutting edge tip to the axis of rotation plus the distance from the second cutting edge tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second cutting edge tip to the axis of rotation minus one-half the distance from the first cutting edge tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  20. Double diameter boring tool

    DOEpatents

    Ashbaugh, F.A.; Murry, K.R.

    1986-02-10

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting flutes formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first flute tip to the axis of rotation plus the distance from the second flute tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second flute tip to the axis of rotation minus one-half the distance from the first flute tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  1. EE Maximization Tool

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    News & Events Skip navigation links Marketing Resources Reports, Publications, and Research Utility Toolkit Utility Potential Calculator EE Maximization Tool Conduit Utility...

  2. Demand Response Analysis Tool

    Energy Science and Technology Software Center

    2012-03-01

    Demand Response Analysis Tool is a software developed at the Lawrence Berkeley National Laboratory. It is initially funded by Southern California Edison. Our goal in developing this tool is to provide an online, useable, with standardized methods, an analysis tool to evaluate demand and demand response performance of commercial and industrial facilities. The tool provides load variability and weather sensitivity analysis capabilities as well as development of various types of baselines. It can be usedmore » by researchers, real estate management firms, utilities, or any individuals who are interested in analyzing their demand and demand response capabilities.« less

  3. Air Sparging Decision Tool

    Energy Science and Technology Software Center

    1996-06-10

    The Air Sparging Decision Tool is a computer decision aid to help environmental managers and field practitioners in evaluating the applicability of air sparging to a wide range of sites and for refining the operation of air sparging systems. The program provides tools for the practitioner to develop the conceptual design for an air sparging system suitable for the identified site. The Tool provides a model of the decision making process, not a detailed designmore » of air sparging systems. The Tool will quickly and cost effectively assist the practitioner in screening for applicability of the technology at a proposed site.« less

  4. Lustre Administrative Tool

    Energy Science and Technology Software Center

    2003-12-24

    The Lustre Administrative Tools (LAT) is a set of programs and utilities designed to facilitate management of the Lustre File System by System Administrators.

  5. Demand Response Analysis Tool

    SciTech Connect

    2012-03-01

    Demand Response Analysis Tool is a software developed at the Lawrence Berkeley National Laboratory. It is initially funded by Southern California Edison. Our goal in developing this tool is to provide an online, useable, with standardized methods, an analysis tool to evaluate demand and demand response performance of commercial and industrial facilities. The tool provides load variability and weather sensitivity analysis capabilities as well as development of various types of baselines. It can be used by researchers, real estate management firms, utilities, or any individuals who are interested in analyzing their demand and demand response capabilities.

  6. Demand Response Dispatch Tool

    Energy Science and Technology Software Center

    2012-08-31

    The Demand Response (DR) Dispatch Tool uses price profiles to dispatch demand response resources and create load modifying profiles. These annual profiles are used as inputs to production cost models and regional planning tools (e.g., PROMOD). The tool has been effectively implemented in transmission planning studies conducted by the Western Electricity Coordinating Council via its Transmission Expansion Planning and Policy Committee. The DR Dispatch Tool can properly model the dispatch of DR resources for bothmore » reliability and economic conditions.« less

  7. Manifold tool guide

    DOEpatents

    Djordjevic, A.

    1983-12-27

    A tool guide is described that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into the cross pipe for cleaning, inspection, etc. 3 figs.

  8. Manifold tool guide

    DOEpatents

    Djordjevic, Aleksandar

    1983-12-27

    A tool guide that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into to cross pipe for cleaning, inspection, etc.

  9. lustre-tools-llnl

    SciTech Connect

    Morrone, C.

    2010-12-17

    lustre-tools-llnl is a small set of commands that are helpful for using and administering a lustre file system.

  10. Manifold tool guide

    DOEpatents

    Djordjevic, A.

    1982-07-08

    A tool guide that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into to cross pipe for cleaning, inspection, etc.

  11. Other Workflow Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tools Other Workflow Tools This page serves as a point of reference to point our users to tools being used by other NERSC projects to see if these can meet their needs. This includes other tools in the workflow ecosystem as well as auxiliary services to enable custom workflows. qdo QDO is a toolkit for managing many many small tasks within a larger batch framework. QDO separates the queue of tasks to perform from the batch jobs that actually perform the tasks. Read More » Galaxy Galaxy - Galaxy

  12. AIRMaster+ Tool Introduction

    Energy.gov [DOE]

    This presentation discusses typical compressed air system operation and discusses methods of system efficiency improvement through use of the AIRMaster+ and CAC LogTool software.

  13. Strain gauge installation tool

    DOEpatents

    Conard, Lisa Marie

    1998-01-01

    A tool and a method for attaching a strain gauge to a test specimen by maaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool.

  14. Fluid sampling tool

    DOEpatents

    Johnston, Roger G.; Garcia, Anthony R. E.; Martinez, Ronald K.

    2001-09-25

    The invention includes a rotatable tool for collecting fluid through the wall of a container. The tool includes a fluid collection section with a cylindrical shank having an end portion for drilling a hole in the container wall when the tool is rotated, and a threaded portion for tapping the hole in the container wall. A passageway in the shank in communication with at least one radial inlet hole in the drilling end and an opening at the end of the shank is adapted to receive fluid from the container. The tool also includes a cylindrical chamber affixed to the end of the shank opposite to the drilling portion thereof for receiving and storing fluid passing through the passageway. The tool also includes a flexible, deformable gasket that provides a fluid-tight chamber to confine kerf generated during the drilling and tapping of the hole. The invention also includes a fluid extractor section for extracting fluid samples from the fluid collecting section.

  15. OOTW Force Design Tools

    SciTech Connect

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  16. Navajo-Hopi Land Commission Renewable Energy Development Project (NREP)

    SciTech Connect

    Thomas Benally, Deputy Director,

    2012-05-15

    The Navajo Hopi Land Commission Office (NHLCO), a Navajo Nation executive branch agency has conducted activities to determine capacity-building, institution-building, outreach and management activities to initiate the development of large-scale renewable energy - 100 megawatt (MW) or larger - generating projects on land in Northwestern New Mexico in the first year of a multi-year program. The Navajo Hopi Land Commission Renewable Energy Development Project (NREP) is a one year program that will develop and market a strategic business plan; form multi-agency and public-private project partnerships; compile site-specific solar, wind and infrastructure data; and develop and use project communication and marketing tools to support outreach efforts targeting the public, vendors, investors and government audiences.

  17. Eclipse Parallel Tools Platform

    Energy Science and Technology Software Center

    2005-02-18

    Designing and developing parallel programs is an inherently complex task. Developers must choose from the many parallel architectures and programming paradigms that are available, and face a plethora of tools that are required to execute, debug, and analyze parallel programs i these environments. Few, if any, of these tools provide any degree of integration, or indeed any commonality in their user interfaces at all. This further complicates the parallel developer's task, hampering software engineering practices,more » and ultimately reducing productivity. One consequence of this complexity is that best practice in parallel application development has not advanced to the same degree as more traditional programming methodologies. The result is that there is currently no open-source, industry-strength platform that provides a highly integrated environment specifically designed for parallel application development. Eclipse is a universal tool-hosting platform that is designed to providing a robust, full-featured, commercial-quality, industry platform for the development of highly integrated tools. It provides a wide range of core services for tool integration that allow tool producers to concentrate on their tool technology rather than on platform specific issues. The Eclipse Integrated Development Environment is an open-source project that is supported by over 70 organizations, including IBM, Intel and HP. The Eclipse Parallel Tools Platform (PTP) plug-in extends the Eclipse framwork by providing support for a rich set of parallel programming languages and paradigms, and a core infrastructure for the integration of a wide variety of parallel tools. The first version of the PTP is a prototype that only provides minimal functionality for parallel tool integration of a wide variety of parallel tools. The first version of the PTP is a prototype that only provides minimal functionality for parallel tool integration, support for a small number of parallel architectures

  18. File:03-CO-b - ROW Process for State Land Board Land.pdf | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    CO-b - ROW Process for State Land Board Land.pdf Jump to: navigation, search File File history File usage Metadata File:03-CO-b - ROW Process for State Land Board Land.pdf Size of...

  19. File:03CAAStateLandLeasingProcessAndLandAccessROWs.pdf | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    03CAAStateLandLeasingProcessAndLandAccessROWs.pdf Jump to: navigation, search File File history File usage Metadata File:03CAAStateLandLeasingProcessAndLandAccessROWs.pdf Size of...

  20. File:03-TX-f - Lease of Land Trade Lands.pdf | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    TX-f - Lease of Land Trade Lands.pdf Jump to: navigation, search File File history File usage Metadata File:03-TX-f - Lease of Land Trade Lands.pdf Size of this preview: 463 599...

  1. Land-Use Change Data and Causal Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Land-Use Change Data and Causal Analysis 05/21/2013 Analysis & Sustainability Nagendra Singh (PI), Keith Kline, Rebecca Efroymson, Varun Chandola, Esther Parish, Budhendra Bhaduri Organization: Oak Ridge National Laboratory This presentation does not contain any proprietary, confidential, or otherwise restricted information 2 Presentation name Goal Statement Project Goal * Design and develop tools and assessment methods to establish scientific basis for understanding and simulating effects

  2. Software & Tools Development

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Software & Tools Development Network R&D Software-Defined Networking (SDN) Experimental Network Testbeds Performance (perfSONAR) Software & Tools Development Data for Researchers Partnerships Publications Workshops Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Software & Tools Development Over the years, ESnet

  3. Graphitic packing removal tool

    DOEpatents

    Meyers, K.E.; Kolsun, G.J.

    1997-11-11

    Graphitic packing removal tools for removal of the seal rings in one piece are disclosed. The packing removal tool has a cylindrical base ring the same size as the packing ring with a surface finish, perforations, knurling or threads for adhesion to the seal ring. Elongated leg shanks are mounted axially along the circumferential center. A slit or slits permit insertion around shafts. A removal tool follower stabilizes the upper portion of the legs to allow a spanner wrench to be used for insertion and removal. 5 figs.

  4. Graphitic packing removal tool

    DOEpatents

    Meyers, Kurt Edward; Kolsun, George J.

    1997-01-01

    Graphitic packing removal tools for removal of the seal rings in one piece. he packing removal tool has a cylindrical base ring the same size as the packing ring with a surface finish, perforations, knurling or threads for adhesion to the seal ring. Elongated leg shanks are mounted axially along the circumferential center. A slit or slits permit insertion around shafts. A removal tool follower stabilizes the upper portion of the legs to allow a spanner wrench to be used for insertion and removal.

  5. Geothermal/Land Use | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    GeothermalLand Use < Geothermal(Redirected from Land Use) Redirect page Jump to: navigation, search REDIRECT GeothermalLand Use Planning Retrieved from "http:en.openei.orgw...

  6. LDK Uni Land JV | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Uni Land JV Jump to: navigation, search Name: LDK & Uni Land JV Place: Italy Product: Italy-based JV to develop and construct PV projects. References: LDK & Uni Land JV1 This...

  7. Montana State Land Board | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Land Board Jump to: navigation, search Name: Montana State Land Board Place: Helena, Montana Website: dnrc.mt.govLandBoardStaff.as References: Webpage1 This article is a stub....

  8. AG Land 5 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    5 Jump to: navigation, search Name AG Land 5 Facility AG Land 5 Sector Wind energy Facility Type Community Wind Facility Status In Service Owner AG Land Energy LLC Developer...

  9. Colorado State Board of Land Commissioners Strategic Plan | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Reference LibraryAdd to library Land Use Plan: Colorado State Board of Land Commissioners Strategic Plan Abstract The Colorado State Board of Land Commissioners (State Land Board)...

  10. Friction stir welding tool

    DOEpatents

    Tolle, Charles R.; Clark, Denis E.; Barnes, Timothy A.

    2008-04-15

    A friction stir welding tool is described and which includes a shank portion; a shoulder portion which is releasably engageable with the shank portion; and a pin which is releasably engageable with the shoulder portion.

  11. Oracle Management Tool Suite

    Energy Science and Technology Software Center

    2007-06-01

    The Oracle Management Tool Suite is used to automatically manage Oracle based systems. This includes startup and shutdown of databases and application servers as well as backup, space management, workload management and log file management.

  12. UNIX Public Tools

    Office of Energy Efficiency and Renewable Energy (EERE)

    SATAN, the System Administrator Tool for Analyzing Networks, is a network security analyzer designed by Dan Farmer and Wietse Venema. SATAN scans systems connected to the network noting the...

  13. Lustre Monitoring Tools

    Energy Science and Technology Software Center

    2007-05-05

    The Lustre Monitoring Tools software package is a set of utilities developed to facilitate real-time and historical monitoring of the performance of a Lustre FileSystem.

  14. PV Hourly Simulation Tool

    Energy Science and Technology Software Center

    2010-12-31

    This software requires inputs of simple general building characteristics and usage information to calculate the energy and cost benefits of solar PV. This tool conducts and complex hourly simulation of solar PV based primarily on the area available on the rooftop. It uses a simplified efficiency calculation method and real panel characteristics. It includes a detailed rate structure to account for time-of-use rates, on-peak and off-peak pricing, and multiple rate seasons. This tool includes themore » option for advanced system design inputs if they are known. This tool calculates energy savings, demand reduction, cost savings, incentives and building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.« less

  15. Smart tool holder

    DOEpatents

    Day, Robert Dean; Foreman, Larry R.; Hatch, Douglas J.; Meadows, Mark S.

    1998-01-01

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut.

  16. Strain gauge installation tool

    DOEpatents

    Conard, L.M.

    1998-06-16

    A tool and a method are disclosed for attaching a strain gauge to a test specimen by maintaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool. 6 figs.

  17. GrayQbTM Single-Faced Version 2 (SF2) Hanford Plutonium Reclamation Facility (PRF) deployment report

    SciTech Connect

    Plummer, J. R.; Immel, D. M.; Serrato, M. G.; Dalmaso, M. J.; Shull, D. J.

    2015-11-18

    The Savannah River National Laboratory (SRNL) in partnership with CH2M Plateau Remediation Company (CHPRC) deployed the GrayQbTM SF2 radiation imaging device at the Hanford Plutonium Reclamation Facility (PRF) to assist in the radiological characterization of the canyon. The deployment goal was to locate radiological contamination hot spots in the PRF canyon, where pencil tanks were removed and decontamination/debris removal operations are on-going, to support the CHPRC facility decontamination and decommissioning (D&D) effort. The PRF canyon D&D effort supports completion of the CHPRC Plutonium Finishing Plant Decommissioning Project. The GrayQbTM SF2 (Single Faced Version 2) is a non-destructive examination device developed by SRNL to generate radiation contour maps showing source locations and relative radiological levels present in the area under examination. The Hanford PRF GrayQbTM Deployment was sponsored by CH2M Plateau Remediation Company (CHPRC) through the DOE Richland Operations Office, Inter-Entity Work Order (IEWO), DOE-RL IEWO- M0SR900210.

  18. Tools for Public Information

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Tools for Discovery Offer Potential Hope for Huntington's Tools for Discovery Offer Potential Hope for Huntington's May 25, 2011 - 3:24pm Addthis Flora Meilleur prepares protein solutions for structural investigation with neutrons. | Courtesy of ORNL Flickr / Jason Richards Flora Meilleur prepares protein solutions for structural investigation with neutrons. | Courtesy of ORNL Flickr / Jason Richards Charles Rousseaux Charles Rousseaux Senior Communications Specialist (detailee) What

  19. Version Control Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tools Version Control Tools Subversion Subversion repositories may be created in the NERSC Global File system. Read More » CVS CVS repositories may be created in the NERSC Global File system. Read More » Git Git is distributed version control system focused on speed, effectivity and real-world usability on large projects. These pages describe how Git is used at NERSC. Read More » Last edited: 2016-04-29 11:35:28

  20. Device Simulation Tool - JCAP

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    PAZ0036_v2.jpg Device Simulation Tool Research Why Solar Fuels Goals & Objectives Thrust 1 Thrust 2 Thrust 3 Thrust 4 Publications Research Highlights Videos Innovations User Facilities Expert Team Benchmarking Database Device Simulation Tool XPS Spectral Database Research Introduction Why Solar Fuels? Goals & Objectives Thrusts Thrust 1 Thrust 2 Thrust 3 Thrust 4 Library Publications Research Highlights Videos Resources User Facilities Expert Team Benchmarking Database Device Simulation

  1. Ewing Land Development Services | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Ewing Land Development Services Jump to: navigation, search Name: Ewing Land Development & Services Place: Pella, Iowa Zip: 50219 Product: Real estate development company...

  2. Elektra Basel Land EBL | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Basel Land EBL Jump to: navigation, search Name: Elektra Basel Land (EBL) Place: Liestal, Switzerland Zip: 4410 Product: Swiss utility with a possible investment interest in...

  3. Arizona State Land Department | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Department Jump to: navigation, search Logo: Arizona State Land Department Name: Arizona State Land Department Abbreviation: ASLD Address: 1616 W. Adams St. Place: Phoenix, AZ Zip:...

  4. Quantitative Analysis of Biofuel Sustainability, Including Land...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Quantitative Analysis of Biofuel Sustainability, Including Land Use Change GHG Emissions Quantitative Analysis of Biofuel Sustainability, Including Land Use Change GHG Emissions ...

  5. State Land Commission FAQ | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Land Commission FAQ Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: State Land Commission FAQ Abstract Frequently Asked Questions, California State...

  6. Energy Corridors on Federal Lands

    Office of Energy Efficiency and Renewable Energy (EERE)

    To improve energy delivery and enhance the electric transmission grid for the future, several government agencies currently are working together to establish a coordinated network of Federal energy corridors on Federal lands throughout the United States.

  7. Land and Facility Use Planning

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1996-07-09

    The Land and Facility Use Planning process provides a way to guide future site development and reuse based on the shared long-term goals and objectives of the Department, site and its stakeholders. Does not cancel other directives.

  8. Algae Biofuels Co-Location Assessment Tool

    Energy Science and Technology Software Center

    2013-09-18

    ABCLAT was built to help any model user with spatially explicit Nitrogen, Phosphorous, and Carbon Dioxide nutrient flux information, and solar resource information evaluate algal cultivation potential. Initial applications of this modeling framework include Algae Biofuels Co-Location Assessment Tool Canada and Australia. The Canadian application was copyrighted November 29th 2011 as the Algae Biofuels Co-Location Assessment Tool for Canada. This copyright assertion is for the general framework from which any country or region with themore » requisite data could create a regionally specific application. The ABCLAT model framework developed by SNL looks at the growth potential in a given region as a function of available nutrients from wastewater and other sources, carbon dioxide from power plants, available solar potential, and if available, land cover and use information. The model framework evaluates the biomass potential, fixed carbon dioxide, potential algal biocrude and required land area for nutrient sources. ABCLAT is built with an object-oriented software program that can provide an easy to use interface for exploring questions related to aigal biomass production.« less

  9. S. 276: A Bill to amend the Surface Mining Control and Reclamation Act of 1977 to improve control of acid mine drainage, and for other purposes. Introduced in the Senate of the United States, One Hundred Third Congress, First Session, February 2, 1993

    SciTech Connect

    Not Available

    1993-01-01

    This bill amends the Surface Mining Control and Reclamation Act of 1977 to improve control of acid mine drainage. State use of funds is addressed.

  10. Manipulative Virtual Tools for Tool Mark Characterization | The...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Manipulative Virtual Tools for Tool Mark Characterization DESCRIPTION: The goal of this project is to develop a methodology whereby a three-dimensional (3-D) computer simulation of...

  11. mirabootcamp-tools-2014.pptx

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    BGQ Performance Tools Sco P arker Mira P erformance B oot C amp: M ay 2 1, 2 014 Argonne L eadership C ompuBng F acility Mira Tools Status Tool N ame Source Provides Q S tatus...

  12. Software Tools | Department of Energy

    Office of Environmental Management (EM)

    Software Tools Software Tools AMO's tools help manufacturers increase industrial energy efficiency at the plant-level and in specific systems. Learn step-by-step ways to identify ...

  13. RSP Tooling Technology

    SciTech Connect

    2001-11-20

    RSP Tooling{trademark} is a spray forming technology tailored for producing molds and dies. The approach combines rapid solidification processing and net-shape materials processing in a single step. The general concept involves converting a mold design described by a CAD file to a tooling master using a suitable rapid prototyping (RP) technology such as stereolithography. A pattern transfer is made to a castable ceramic, typically alumina or fused silica (Figure 1). This is followed by spray forming a thick deposit of a tooling alloy on the pattern to capture the desired shape, surface texture, and detail. The resultant metal block is cooled to room temperature and separated from the pattern. The deposit's exterior walls are machined square, allowing it to be used as an insert in a standard mold base. The overall turnaround time for tooling is about 3 to 5 days, starting with a master. Molds and dies produced in this way have been used in high volume production runs in plastic injection molding and die casting. A Cooperative Research and Development Agreement (CRADA) between the Idaho National Engineering and Environmental Laboratory (INEEL) and Grupo Vitro has been established to evaluate the feasibility of using RSP Tooling technology for producing molds and dies of interest to Vitro. This report summarizes results from Phase I of this agreement, and describes work scope and budget for Phase I1 activities. The main objective in Phase I was to demonstrate the feasibility of applying the Rapid Solidification Process (RSP) Tooling method to produce molds for the manufacture of glass and other components of interest to Vitro. This objective was successfully achieved.

  14. Grid Client Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Client Tools Grid Client Tools Using OSG and Globus client software You can either run the OSG/Globus client software directly on the NERSC systems via "modules" or by downloading it to your workstation. On your workstation: Download and install the OSG client software. Then run the following to setup your environment: % . $INSTALL_DIR/setup.sh or % source $INSTALL_DIR/setup.csh On NERSC Compute Systems: Use the module command to load the OSG or Globus toolkit. Where possible, you

  15. Drum lid removal tool

    DOEpatents

    Pella, Bernard M.; Smith, Philip D.

    2010-08-24

    A tool for removing the lid of a metal drum wherein the lid is clamped over the drum rim without protruding edges, the tool having an elongated handle with a blade carried by an angularly positioned holder affixed to the midsection of the handle, the blade being of selected width to slice between lid lip and the drum rim and, when the blade is so positioned, upward motion of the blade handle will cause the blade to pry the lip from the rim and allow the lid to be removed.

  16. The GNEMRE Dendro Tool.

    SciTech Connect

    Merchant, Bion John

    2007-10-01

    The GNEMRE Dendro Tool provides a previously unrealized analysis capability in the field of nuclear explosion monitoring. Dendro Tool allows analysts to quickly and easily determine the similarity between seismic events using the waveform time-series for each of the events to compute cross-correlation values. Events can then be categorized into clusters of similar events. This analysis technique can be used to characterize historical archives of seismic events in order to determine many of the unique sources that are present. In addition, the source of any new events can be quickly identified simply by comparing the new event to the historical set.

  17. Fenestration Software Tools

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    dccurcija@lbl.gov Lawrence Berkeley National Laboratory Fenestration Software Tools 2014 Building Technologies Office Peer Review 2 Project Summary Timeline: Start date: 10/1/2013 (longer term effort through different projects in the past) Planned end date: 9/30/2018 Key Milestones 1. Released version of the next generation of fenestration software tools 2. Addition of full set of models for cellular shades and pleated shades Budget: Total DOE $ to date: $265k Total future DOE $: $2,000k Key

  18. PCard Data Analysis Tool

    SciTech Connect

    Hilts, Jim

    2005-04-01

    The Procurement Card data analysis and monitoring tool enables due-diligence review using predefined user-created queries and reports. The system tracks individual compliance emails. More specifically, the tool: - Helps identify exceptions or questionable and non-compliant purchases, - Creates audit random sample on request, - Allows users to create and run new or ad-hoc queries and reports, - Monitors disputed charges, - Creates predefined Emails to Cardholders requesting documentation and/or clarification, - Tracks audit status, notes, Email status (date sent, response), audit resolution.

  19. PCard Data Analysis Tool

    Energy Science and Technology Software Center

    2005-04-01

    The Procurement Card data analysis and monitoring tool enables due-diligence review using predefined user-created queries and reports. The system tracks individual compliance emails. More specifically, the tool: - Helps identify exceptions or questionable and non-compliant purchases, - Creates audit random sample on request, - Allows users to create and run new or ad-hoc queries and reports, - Monitors disputed charges, - Creates predefined Emails to Cardholders requesting documentation and/or clarification, - Tracks audit status, notes,more » Email status (date sent, response), audit resolution.« less

  20. Log-Tool

    SciTech Connect

    Goodall, John

    2012-05-21

    Log files are typically semi- or un-structured. To be useable for visualization and machine learning, they need to be parsed into a standard, structured format. Log-tool is a tool for facilitating the parsing, structuring, and routing of log files (e.g. intrusion detection long, web server logs, system logs). It consists of three main components: (1) Input – it will input data from files, standard input, and syslog, (2) Parser – it will parse the log file based on regular expressions into structured data (JSNO format), (3) Output – it will output structured data into commonly used formats, including Redis (a database), standard output, and syslog.

  1. Software and Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tools Software and Tools Chos Chos is used to select your operating system at PDSF. Read More » Modules Module is a system which you can use to specify what software you want to use... Read More » Project Accounts You can use a shared project account to facilitate collaboration... Read More » Checking Quotas To check your quotas use the myquota command... Read More » Accelerating Remote X Performance You can use NX to greatly improve the performance of X window applications. Read More »

  2. Intel_tools.pptx

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ! Cray QBR, Apr 8, 2015 Intel Tools for optimizations HBM tools are available on Edison * The memkind library is a user extensible heap manager. It can be used to test/simulate the benefit of high hand width memory (HBM or HBW) on the dual socket Edison compute nodes today. - Use the QPI bus to simulate slow memory - This is not an accurate model of the bandwidth and latency characteristics of the KNL on package memory, but is a reasonable way to determine which data structures rely critically

  3. HPC Debugging and Performance Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Debugging and Performance Tools HPC Debugging and Performance Tools February 16, 2012 Last edited: 2016-04-29 11:35:0

  4. CLEAP_Tools_DRAFT_nameupdate

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Zoning Check Climate Explorer Smart Location Database Coastal Resilience Mapping Tool ... Cost of renewable energy spreadsheet tool JEDI Open PV Database OpenEI Datasets BEDES ...

  5. EIA - Greenhouse Gas Emissions - Land use

    Gasoline and Diesel Fuel Update

    6. Land use 6.1. Total land use, land use change, and forests This chapter presents estimates of carbon sequestration (removal from the atmosphere) and emissions (release into the atmosphere) from forests, croplands, grasslands, and residential areas (urban trees, grass clippings, and food scraps) in the United States. In 2008, land use, land use change, and forests were responsible for estimated net carbon sequestration of 940 MMTCO2e (Table 31), representing 16 percent of total U.S. CO2

  6. Electrically powered hand tool

    DOEpatents

    Myers, Kurt S.; Reed, Teddy R.

    2007-01-16

    An electrically powered hand tool is described and which includes a three phase electrical motor having a plurality of poles; an electrical motor drive electrically coupled with the three phase electrical motor; and a source of electrical power which is converted to greater than about 208 volts three-phase and which is electrically coupled with the electrical motor drive.

  7. MULTIPLE SHAFT TOOL HEAD

    DOEpatents

    Colbert, H.P.

    1962-10-23

    An improved tool head arrangement is designed for the automatic expanding of a plurality of ferruled tubes simultaneously. A plurality of output shafts of a multiple spindle drill head are driven in unison by a hydraulic motor. A plurality of tube expanders are respectively coupled to the shafts through individual power train arrangements. The axial or thrust force required for the rolling operation is provided by a double acting hydraulic cylinder having a hollow through shaft with the shaft cooperating with an internally rotatable splined shaft slidably coupled to a coupling rigidly attached to the respectlve output shaft of the drill head, thereby transmitting rotary motion and axial thrust simultaneously to the tube expander. A hydraulic power unit supplies power to each of the double acting cylinders through respective two-position, four-way valves, under control of respective solenoids for each of the cylinders. The solenoids are in turn selectively controlled by a tool selection control unit which in turn is controlled by signals received from a programmed, coded tape from a tape reader. The number of expanders that are extended in a rolling operation, which may be up to 42 expanders, is determined by a predetermined program of operations depending upon the arrangement of the ferruled tubes to be expanded in the tube bundle. The tape reader also supplies dimensional information to a machine tool servo control unit for imparting selected, horizontal and/or vertical movement to the tool head assembly. (AEC)

  8. Chizu Task Mapping Tool

    Energy Science and Technology Software Center

    2014-07-01

    Chizu is a tool for Mapping MPI processes or tasks to physical processors or nodes for optimizing communication performance. It takes the communication graph of a High Performance Computing (HPC) application and the interconnection topology of a supercomputer as input. It outputs a new MPI rand to processor mapping, which can be used when launching the HPC application.

  9. Frequency Response Tool

    Energy Science and Technology Software Center

    2014-03-13

    According to the North American Electric Reliability Corporation (NERC) definition: “Frequency response is a measure of an Interconnection’s ability to stabilize frequency immediately following the sudden loss of generation or load, and is a critical component of the reliable operation of the Bulk-Power System, particularly during disturbances and recoveries. Failure to maintain frequency can disrupt the operation of equipment and initiate disconnection of power plant equipment to prevent it from being damaged, which could leadmore » to wide-spread blackouts.” Frequency Response Tool automates the power system frequency response analysis process. The tool performs initial estimation of the system frequency parameters (initial frequency, minimum frequency, settling point). User can visually inspect and adjust these parameters. The tool also calculates the frequency response performance metrics of the system, archives the historic events and baselines the system performance. Frequency response performance characteristics of the system are calculated using phasor measurement unit (PMU) information. Methodology of the frequency response performance assessment implemented in the tool complies with the NERC Frequency response standard.« less

  10. Smart tool holder

    DOEpatents

    Day, R.D.; Foreman, L.R.; Hatch, D.J.; Meadows, M.S.

    1998-09-08

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut. 3 figs.

  11. Energy Footprint Tool

    Office of Energy Efficiency and Renewable Energy (EERE)

    Developed by the U.S. Department of Energy, the Energy Footprint Tool can help manufacturing, commercial and institutional facilities to track their energy consumption, factors related to energy use, and significant energy end-use. This is collectively referred to as the facility’s energy footprint.

  12. Clean Cities Tools

    SciTech Connect

    2014-12-19

    The U.S. Department of Energy's Clean Cities offers a large collection of Web-based tools on the Alternative Fuels Data Center. These calculators, interactive maps, and data searches can assist fleets, fuels providers, and other transportation decision makers in their efforts to reduce petroleum use.

  13. Economic assessment of the impact on coal production due to enforcement of the Surface Mining Control and Reclamation Act of 1977. Cost report. Final report

    SciTech Connect

    Not Available

    1980-11-12

    The report summarizes the efforts made in the cost analysis portion of the 'Economic Assessment of the Impact on Coal Production Due to Enforcement of the Surface Mining Control and Reclamation Act (SMCRA) of 1977. The objective of the cost analysis portion of the study was to supplement the study's examination of the benefits of SMCRA with an analysis of the costs of SMCRA as based on industry experience and data. The analysis involved the development and field test of a methodology for constructing estimates of the costs of complying with regulations at individual surface coal mines.

  14. A SOAP Web Service for accessing MODIS land product subsets

    SciTech Connect

    SanthanaVannan, Suresh K; Cook, Robert B; Pan, Jerry Yun; Wilson, Bruce E

    2011-01-01

    Remote sensing data from satellites have provided valuable information on the state of the earth for several decades. Since March 2000, the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor on board NASA s Terra and Aqua satellites have been providing estimates of several land parameters useful in understanding earth system processes at global, continental, and regional scales. However, the HDF-EOS file format, specialized software needed to process the HDF-EOS files, data volume, and the high spatial and temporal resolution of MODIS data make it difficult for users wanting to extract small but valuable amounts of information from the MODIS record. To overcome this usability issue, the NASA-funded Distributed Active Archive Center (DAAC) for Biogeochemical Dynamics at Oak Ridge National Laboratory (ORNL) developed a Web service that provides subsets of MODIS land products using Simple Object Access Protocol (SOAP). The ORNL DAAC MODIS subsetting Web service is a unique way of serving satellite data that exploits a fairly established and popular Internet protocol to allow users access to massive amounts of remote sensing data. The Web service provides MODIS land product subsets up to 201 x 201 km in a non-proprietary comma delimited text file format. Users can programmatically query the Web service to extract MODIS land parameters for real time data integration into models, decision support tools or connect to workflow software. Information regarding the MODIS SOAP subsetting Web service is available on the World Wide Web (WWW) at http://daac.ornl.gov/modiswebservice.

  15. Load Model Data Tool

    SciTech Connect

    David Chassin, Pavel Etingov

    2013-04-30

    The LMDT software automates the process of the load composite model data preparation in the format supported by the major power system software vendors (GE and Siemens). Proper representation of the load composite model in power system dynamic analysis is very important. Software tools for power system simulation like GE PSLF and Siemens PSSE already include algorithms for the load composite modeling. However, these tools require that the input information on composite load to be provided in custom formats. Preparation of this data is time consuming and requires multiple manual operations. The LMDT software enables to automate this process. Software is designed to generate composite load model data. It uses the default load composition data, motor information, and bus information as an input. Software processes the input information and produces load composition model. Generated model can be stored in .dyd format supported by GE PSLF package or .dyr format supported by Siemens PSSE package.

  16. Fluid blade disablement tool

    SciTech Connect

    Jakaboski, Juan-Carlos; Hughs, Chance G.; Todd, Steven N.

    2012-01-10

    A fluid blade disablement (FBD) tool that forms both a focused fluid projectile that resembles a blade, which can provide precision penetration of a barrier wall, and a broad fluid projectile that functions substantially like a hammer, which can produce general disruption of structures behind the barrier wall. Embodiments of the FBD tool comprise a container capable of holding fluid, an explosive assembly which is positioned within the container and which comprises an explosive holder and explosive, and a means for detonating. The container has a concavity on the side adjacent to the exposed surface of the explosive. The position of the concavity relative to the explosive and its construction of materials with thicknesses that facilitate inversion and/or rupture of the concavity wall enable the formation of a sharp and coherent blade of fluid advancing ahead of the detonation gases.

  17. Stack Trace Analysis Tool

    Energy Science and Technology Software Center

    2013-02-19

    STAT is a light weight debugging tool that gathers and merges stack traces from all of the processes in a parallell application. STAT uses the MRNet tree based overlay network to broadcast commands from the tool front-end to the STAT daemons and for the front-end to gather the traces from the STAT daemons. As the traces propagate through the MRNet network tree, they are merged across all tasks to from a single call prefix tree.more » The call prefix tree can be examined to identify tasks with similar function call patterns and to delineate a small set of equivalence slasses. A representative task from each of these classes can then be fed into a full feature debugger like TotalView for root cause analysis.« less

  18. Pneumatic soil removal tool

    DOEpatents

    Neuhaus, J.E.

    1992-10-13

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw. 3 figs.

  19. Pneumatic soil removal tool

    DOEpatents

    Neuhaus, John E.

    1992-01-01

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw.

  20. Load Model Data Tool

    Energy Science and Technology Software Center

    2013-04-30

    The LMDT software automates the process of the load composite model data preparation in the format supported by the major power system software vendors (GE and Siemens). Proper representation of the load composite model in power system dynamic analysis is very important. Software tools for power system simulation like GE PSLF and Siemens PSSE already include algorithms for the load composite modeling. However, these tools require that the input information on composite load to bemore » provided in custom formats. Preparation of this data is time consuming and requires multiple manual operations. The LMDT software enables to automate this process. Software is designed to generate composite load model data. It uses the default load composition data, motor information, and bus information as an input. Software processes the input information and produces load composition model. Generated model can be stored in .dyd format supported by GE PSLF package or .dyr format supported by Siemens PSSE package.« less

  1. Algal functional annotation tool

    SciTech Connect

    Lopez, D.; Casero, D.; Cokus, S. J.; Merchant, S. S.; Pellegrini, M.

    2012-07-01

    The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on KEGG pathway maps and batch gene identifier conversion.

  2. List of Programming Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Programming Tools List List of Programming Tools Package Platform Version Module Install Date Date Made Default 7zip genepool 9.20.1 7zip/9.20.1 2013-01-14 2013-01-14 7zip phoebe 9.20.1 7zip/9.20.1 2013-01-14 2013-06-26 ABINIT cori 7.10.4 abinit/7.10.4 2015-09-24 2015-09-24 ABINIT cori 8.0.8 abinit/8.0.8 2016-06-30 2016-06-30 ABINIT edison 7.0.5 abinit/7.0.5 2013-03-12 2013-03-12 ABINIT edison 7.10.2 abinit/7.10.2 2015-01-27 ABINIT edison 7.10.4 abinit/7.10.4 2015-07-31 ABINIT edison 7.4.2

  3. Log-Tool

    Energy Science and Technology Software Center

    2012-05-21

    Log files are typically semi- or un-structured. To be useable for visualization and machine learning, they need to be parsed into a standard, structured format. Log-tool is a tool for facilitating the parsing, structuring, and routing of log files (e.g. intrusion detection long, web server logs, system logs). It consists of three main components: (1) Input – it will input data from files, standard input, and syslog, (2) Parser – it will parse the logmore » file based on regular expressions into structured data (JSNO format), (3) Output – it will output structured data into commonly used formats, including Redis (a database), standard output, and syslog.« less

  4. Building energy analysis tool

    DOEpatents

    Brackney, Larry; Parker, Andrew; Long, Nicholas; Metzger, Ian; Dean, Jesse; Lisell, Lars

    2016-04-12

    A building energy analysis system includes a building component library configured to store a plurality of building components, a modeling tool configured to access the building component library and create a building model of a building under analysis using building spatial data and using selected building components of the plurality of building components stored in the building component library, a building analysis engine configured to operate the building model and generate a baseline energy model of the building under analysis and further configured to apply one or more energy conservation measures to the baseline energy model in order to generate one or more corresponding optimized energy models, and a recommendation tool configured to assess the one or more optimized energy models against the baseline energy model and generate recommendations for substitute building components or modifications.

  5. Stack Trace Analysis Tool

    Energy Science and Technology Software Center

    2008-01-16

    STAT is a light weight debugging tool that gathers and merges stack traces from all of the processes in a parallel application. STAT uses the MRNet free based overlay network to broadcast commands from the tool front-end to the STAT daemons and for the front-end to gather the traces from the STAT daemons. As the traces propagate through the MRNet network tree, they are merged across all tasks to form a single call prefix tree.more » The call prefix tree can be examined to identify tasks with similar function call patterns and to delineate a small set of equivalence classes. A representative task from each of these classes can then be fed into a full feature debugger like TotalView for root cause analysis.« less

  6. Channel nut tool

    DOEpatents

    Olson, Marvin

    2016-01-12

    A method, system, and apparatus for installing channel nuts includes a shank, a handle formed on a first end of a shank, and an end piece with a threaded shaft configured to receive a channel nut formed on the second end of the shaft. The tool can be used to insert or remove a channel nut in a channel framing system and then removed from the channel nut.

  7. Java Vertexing Tools

    SciTech Connect

    Strube, Jan; Graf, Norman; /SLAC

    2006-03-03

    This document describes the implementation of the topological vertex finding algorithm ZVTOP within the org.lcsim reconstruction and analysis framework. At the present date, Java vertexing tools allow users to perform topological vertexing on tracks that have been obtained from a Fast MC simulation. An implementation that will be able to handle fully reconstructed events is being designed from the ground up for longevity and maintainability.

  8. Environmental Compliance Assistance Tool

    Energy Science and Technology Software Center

    1999-04-16

    ENVIROCAT is a database/knowledge base software system designed to assist in environment, safety and health (ES&H) regulatory compliance assessments of manufacturing processes. Materials and processes are mapped to ES&H regulations. The regulations database identifies materials'' quantities and limits of compliance. Materials are identified per descriptive name or CAS number. ENVIROCAT has an interactive user/tool capability such that a question and answer session on materials and processes is custom tailored to a particular manufacturing site.

  9. Sierra Nevada Tools

    Energy Science and Technology Software Center

    2004-01-01

    SNTools is a general framework for managing, through the use of policies, development tools used to create software. To date, most implementations written under the framework focus on managing revision control, building and testing. The Sierra implementation of the SNTools is used in the development and installation of the SIERRA Framework and its applications, SNTools is used as a method of managing or codifying software quality engineering practices.

  10. REMOTE RETRIEVING TOOL

    DOEpatents

    Fromm, L.W. Jr.

    1958-08-19

    A retrieving tool is described to securely grasp an object for emplacement in, or withdrawal from, an elongated tube. The object is grasped by hooks actuated by a wedge and cann mechanism. The mechanism on the end of a long rodlike structure is controlled by levers or bars at the access end of the tube. This device is particularly useful for positioning fuel elements within a reactor core.

  11. Software and Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Edison File Storage and I/O Software and Tools Debugging and Profiling Performance and Optimization Cray XC30 Documentation PDSF Genepool Queues and Scheduling Retired Systems Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or

  12. Software and Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    File Storage Software and Tools Performance and Optimization Retirement Plans Jesup Dirac Edison Phase I Euclid - Retired 01/31/2013 Franklin - Retired 04/30/12 Bassi Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821

  13. Software and Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Franklin Queues and Policies File storage and I/O Software and Tools Debugging and profiling Cray XT Documentation Franklin is Being Retired Bassi Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 Account Support

  14. Software and Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    File Storage and I/O Software and Tools Debugging and profiling Performance and Optimization Cray XE Documentation Cluster Compatibility Mode Hopper, Cray XE6 Carver Jesup Dirac Edison Phase I Euclid - Retired 01/31/2013 Franklin - Retired 04/30/12 Bassi Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours

  15. NREL: Technology Deployment - Tool Development

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tool Development Use NREL's models and tools to prioritize opportunities and analyze the energy savings and economics of energy efficiency, advanced transportation, and renewable energy projects. NREL develops geographic tools, interactive calculators, market and metrics databases, and mobile applications to help inform sustainable energy projects and prepare the market for emerging technologies. Geographic Tools Drawing from rich datasets, NREL builds tools that deliver interactive mapping

  16. Fluid sampling tool

    DOEpatents

    Garcia, A.R.; Johnston, R.G.; Martinez, R.K.

    1999-05-25

    A fluid sampling tool is described for sampling fluid from a container. The tool has a fluid collecting portion which is drilled into the container wall, thereby affixing it to the wall. The tool may have a fluid extracting section which withdraws fluid collected by the fluid collecting section. The fluid collecting section has a fluted shank with an end configured to drill a hole into a container wall. The shank has a threaded portion for tapping the borehole. The shank is threadably engaged to a cylindrical housing having an inner axial passageway sealed at one end by a septum. A flexible member having a cylindrical portion and a bulbous portion is provided. The housing can be slid into an inner axial passageway in the cylindrical portion and sealed to the flexible member. The bulbous portion has an outer lip defining an opening. The housing is clamped into the chuck of a drill, the lip of the bulbous section is pressed against a container wall until the shank touches the wall, and the user operates the drill. Wall shavings (kerf) are confined in a chamber formed in the bulbous section as it folds when the shank advances inside the container. After sufficient advancement of the shank, an o-ring makes a seal with the container wall. 6 figs.

  17. Frequency Response Analysis Tool

    SciTech Connect

    Etingov, Pavel V.; Kosterev, Dmitry; Dai, T.

    2014-12-31

    Frequency response has received a lot of attention in recent years at the national level, which culminated in the development and approval of North American Electricity Reliability Corporation (NERC) BAL-003-1 Frequency Response and Frequency Bias Setting Reliability Standard. This report is prepared to describe the details of the work conducted by Pacific Northwest National Laboratory (PNNL) in collaboration with the Bonneville Power Administration and Western Electricity Coordinating Council (WECC) Joint Synchronized Information Subcommittee (JSIS) to develop a frequency response analysis tool (FRAT). The document provides the details on the methodology and main features of the FRAT. The tool manages the database of under-frequency events and calculates the frequency response baseline. Frequency response calculations are consistent with frequency response measure (FRM) in NERC BAL-003-1 for an interconnection and balancing authority. The FRAT can use both phasor measurement unit (PMU) data, where available, and supervisory control and data acquisition (SCADA) data. The tool is also capable of automatically generating NERC Frequency Response Survey (FRS) forms required by BAL-003-1 Standard.

  18. Fluid sampling tool

    DOEpatents

    Garcia, Anthony R.; Johnston, Roger G.; Martinez, Ronald K.

    1999-05-25

    A fluid sampling tool for sampling fluid from a container. The tool has a fluid collecting portion which is drilled into the container wall, thereby affixing it to the wall. The tool may have a fluid extracting section which withdraws fluid collected by the fluid collecting section. The fluid collecting section has a fluted shank with an end configured to drill a hole into a container wall. The shank has a threaded portion for tapping the borehole. The shank is threadably engaged to a cylindrical housing having an inner axial passageway sealed at one end by a septum. A flexible member having a cylindrical portion and a bulbous portion is provided. The housing can be slid into an inner axial passageway in the cylindrical portion and sealed to the flexible member. The bulbous portion has an outer lip defining an opening. The housing is clamped into the chuck of a drill, the lip of the bulbous section is pressed against a container wall until the shank touches the wall, and the user operates the drill. Wall shavings (kerf) are confined in a chamber formed in the bulbous section as it folds when the shank advances inside the container. After sufficient advancement of the shank, an o-ring makes a seal with the container wall.

  19. Algal functional annotation tool

    Energy Science and Technology Software Center

    2012-07-12

    Abstract BACKGROUND: Progress in genome sequencing is proceeding at an exponential pace, and several new algal genomes are becoming available every year. One of the challenges facing the community is the association of protein sequences encoded in the genomes with biological function. While most genome assembly projects generate annotations for predicted protein sequences, they are usually limited and integrate functional terms from a limited number of databases. Another challenge is the use of annotations tomore » interpret large lists of 'interesting' genes generated by genome-scale datasets. Previously, these gene lists had to be analyzed across several independent biological databases, often on a gene-by-gene basis. In contrast, several annotation databases, such as DAVID, integrate data from multiple functional databases and reveal underlying biological themes of large gene lists. While several such databases have been constructed for animals, none is currently available for the study of algae. Due to renewed interest in algae as potential sources of biofuels and the emergence of multiple algal genome sequences, a significant need has arisen for such a database to process the growing compendiums of algal genomic data. DESCRIPTION: The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on

  20. Algal functional annotation tool

    SciTech Connect

    2012-07-12

    Abstract BACKGROUND: Progress in genome sequencing is proceeding at an exponential pace, and several new algal genomes are becoming available every year. One of the challenges facing the community is the association of protein sequences encoded in the genomes with biological function. While most genome assembly projects generate annotations for predicted protein sequences, they are usually limited and integrate functional terms from a limited number of databases. Another challenge is the use of annotations to interpret large lists of 'interesting' genes generated by genome-scale datasets. Previously, these gene lists had to be analyzed across several independent biological databases, often on a gene-by-gene basis. In contrast, several annotation databases, such as DAVID, integrate data from multiple functional databases and reveal underlying biological themes of large gene lists. While several such databases have been constructed for animals, none is currently available for the study of algae. Due to renewed interest in algae as potential sources of biofuels and the emergence of multiple algal genome sequences, a significant need has arisen for such a database to process the growing compendiums of algal genomic data. DESCRIPTION: The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on KEGG

  1. Decision Support Tool: Integrated REDD+ accounting frameworks...

    OpenEI (Open Energy Information) [EERE & EIA]

    Decision Support Tool: Integrated REDD+ accounting frameworks: Nested national approaches Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Decision Support Tool:...

  2. Renewable Energy Financial Instruments Guidance Tool (REFINe...

    OpenEI (Open Energy Information) [EERE & EIA]

    Guidance Tool (REFINe) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Financial Instruments Guidance Tool (REFINe) Focus Area: Renewable Energy...

  3. Energy Storage Computational Tool | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Energy Storage Computational Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Storage Computational Tool AgencyCompany Organization: Navigant Consulting...

  4. LEDSGP/tools | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Data & Tools Publications Training Knowledge Portals LEDS Benefits Back to top Peer-Learning Tools LEDS Activity and Tool Inventory Our LEDS Activity and Tool Inventory provides...

  5. Water Project Screening Tool | Department of Energy

    Energy Saver

    Project Screening Tool Water Project Screening Tool Excel-based tool enables federal agencies to quickly screen sites for water-efficiency opportunities. The objective of the tool ...

  6. Manipulative Virtual Tools for Tool Mark Characterization | The Ames

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laboratory Manipulative Virtual Tools for Tool Mark Characterization FWP/Project Description: The goal of this project is to develop a methodology whereby a three-dimensional (3-D) computer simulation of a tool tip is generated. Quantitative 3-D data from the suspected tool and evidence toolmark will be acquired and a virtual reality program developed that takes this data and reconstructs a "virtual tool" for computer manipulation to create "virtual tool marks." Duplicate

  7. Bureau of Land Management - Table 1.4-1 - Land Use Planning Process...

    OpenEI (Open Energy Information) [EERE & EIA]

    LibraryAdd to library PermittingRegulatory Guidance - Instructions: Bureau of Land Management - Table 1.4-1 - Land Use Planning Process StepsPermittingRegulatory...

  8. Figure 1. Project Area, Focused Study Area, Potential Access Agreement Land, and Land Not

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Page 4 of 8 Figure 1. Project Area, Focused Study Area, Potential Access Agreement Land, and Land Not Suitable for Conveyance

  9. A thick homogeneous vegetated cover design proves cost - and schedule-effective for the reclamation of uranium mills sites near Spokane, Washington

    SciTech Connect

    Blacklaw, J.; Robertson, G.; Stoffel, D.; Ahmad, J.; Fordham, E.

    1997-08-01

    The Washington State Department of Health (WDOH) has licensed two medium sized uranium mills with tailings impoundments covering 28 and 40 hectares (70 and 100 acres), respectively, The uranium mill licensees have submitted closure and reclamation plans to the state, and site-specific conditions have determined the closure design features, Conventional uranium mill cover designs usually incorporate an overall cap of one to three meters, which includes a low-permeability clay barrier layer. A technical evaluation of several uranium mill facilities that used this design was published in the fall of 1994 and reported that unexpected vegetation root damage had occurred in the low-permeability clay (or bentonite amended) barrier layers. The technical report suggested that the low-permeability design feature at some sites could be compromised within a very short time and the regulatory goal of 1,000 years performance might not be achieved. In October 1994, WDOH sponsored a technical forum meeting to consider design alternatives to address these reliability concerns. Representatives from the federal government, nuclear industry, licensees, engineering firms, and state regulatory agencies attended the workshop. Risk factors considered in the evaluation of the uranium mill reclamation plans include: (1) radon gas emanation through the cover (the air pathway), and (2) migration of hazardous and/or radioactive constituents (the groundwater pathway). Additional design considerations include site structural stability, longevity of 1,000 years, and no active (ongoing) maintenance. 9 refs.

  10. Career Map: Land Acquisition Specialist | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Land Acquisition Specialist Career Map: Land Acquisition Specialist a male land acquisition specialist takes notes while surveying a piece of land. Land Acquisition Specialist Position Title Land Acquisition Specialist Alternate Title(s) Land Agent, Land Acquisition Associate Education & Training Level Bachelor degree required, prefer graduate degree Education & Training Level Description Land acquisition specialists are expected to have a bachelor's degree or higher in business, real

  11. Cyber Security Evaluation Tool

    SciTech Connect

    2009-08-03

    CSET is a desktop software tool that guides users through a step-by-step process to assess their control system network security practices against recognized industry standards. The output from CSET is a prioritized list of recommendations for improving the cyber security posture of your organization?¢????s ICS or enterprise network. CSET derives the recommendations from a database of cybersecurity standards, guidelines, and practices. Each recommendation is linked to a set of actions that can be applied to enhance cybersecurity controls.

  12. Cyber Security Evaluation Tool

    Energy Science and Technology Software Center

    2009-08-03

    CSET is a desktop software tool that guides users through a step-by-step process to assess their control system network security practices against recognized industry standards. The output from CSET is a prioritized list of recommendations for improving the cyber security posture of your organization’s ICS or enterprise network. CSET derives the recommendations from a database of cybersecurity standards, guidelines, and practices. Each recommendation is linked to a set of actions that can be applied tomore » enhance cybersecurity controls.« less

  13. Graphical Contingency Analysis Tool

    Energy Science and Technology Software Center

    2010-03-02

    GCA is a visual analytic tool for power grid contingency analysis to provide more decision support for power grid operations. GCA allows power grid operators to quickly gain situational awareness of power grid by converting large amounts of operational data to graphic domain with a color contoured map; identify system trend and foresee and discern emergencies by performing trending analysis; identify the relationships between system configurations and affected assets by conducting clustering analysis; and identifymore » the best action by interactively evaluate candidate actions.« less

  14. Groove refinishing tool

    DOEpatents

    Kellogg, Harvey J.; Holm, Robert O.

    1983-01-01

    A groove refinishing tool which utilizes a finishing wheel which is controlled by an air grinder motor. The air grinder motor is mounted on a main body section which is pivotally attached to a shoe element. The shoe element contains guide pins which guide the shoe element on the groove to be refinished. Application of pressure on the main body element compresses a weight counterbalance spring to extend the finishing wheel through the shoe element to refinish the groove surface. A window is provided for viewing the refinishing operation. Milling operations can also be performed by replacing the finishing wheel with a milling wheel.

  15. Solar Land Use | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Solar Land Use Jump to: navigation, search (The following text is derived from a National Renewable Energy Laboratory report on solar land use in the United States.)1 One concern...

  16. Land Use Planning Handbook | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Handbook H-1601-1 released by the United States Department of the Interior Bureau of Land Management (BLM). "This Handbook provides supplemental guidance to the Bureau of Land...

  17. Marine One Landing Exercise at Argonne

    SciTech Connect

    2013-03-20

    Marine One and its support helicopters conduct a landing exercise at Argonne prior to the President's visit.

  18. Geometric reasoning about assembly tools

    SciTech Connect

    Wilson, R.H.

    1997-01-01

    Planning for assembly requires reasoning about various tools used by humans, robots, or other automation to manipulate, attach, and test parts and subassemblies. This paper presents a general framework to represent and reason about geometric accessibility issues for a wide variety of such assembly tools. Central to the framework is a use volume encoding a minimum space that must be free in an assembly state to apply a given tool, and placement constraints on where that volume must be placed relative to the parts on which the tool acts. Determining whether a tool can be applied in a given assembly state is then reduced to an instance of the FINDPLACE problem. In addition, the author presents more efficient methods to integrate the framework into assembly planning. For tools that are applied either before or after their target parts are mated, one method pre-processes a single tool application for all possible states of assembly of a product in polynomial time, reducing all later state-tool queries to evaluations of a simple expression. For tools applied after their target parts are mated, a complementary method guarantees polynomial-time assembly planning. The author presents a wide variety of tools that can be described adequately using the approach, and surveys tool catalogs to determine coverage of standard tools. Finally, the author describes an implementation of the approach in an assembly planning system and experiments with a library of over one hundred manual and robotic tools and several complex assemblies.

  19. Fundamental to the Cloud Land Surface Interaction Campaign (CLASIC...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    in agriculture ranging from more accurate weather forecasting to improved water management decisions and crop yield estimation. CLASIC CLASIC - - LAND LAND Cloud and Land...

  20. Geothermal/Land Use Planning | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Land Use Planning < Geothermal(Redirected from GeothermalLand Use) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Land Use Planning Leasing Exploration Well Field...

  1. Hawaii State Land Use Commission | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Hawaii State Land Use Commission Jump to: navigation, search Name: State Land Use Commission Abbreviation: LUC Place: Honolulu, Hawaii References: State Land Use Commission -...

  2. RCW 79.13 Land Leases | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    RCW 79.13 Land LeasesLegal Abstract Washington statute governing the administration of land leases for state trust lands. Published NA Year Signed or Took Effect...

  3. Treatment Deployment Evaluation Tool

    SciTech Connect

    Rynearson, Michael Ardel; Plum, Martin Michael

    1999-08-01

    The U.S. Department of Energy (DOE) is responsible for the final disposition of legacy spent nuclear fuel (SNF). As a response, DOE's National Spent Nuclear Fuel Program (NSNFP) has been given the responsibility for the disposition of DOE -owned SNF. Many treatment technologies have been identified to treat some forms of SNF so that the resulting treated product is acceptable by the disposition site. One of these promising treatment processes is the electrometallurgical treatment (EMT) currently in development; a second is an Acid Wash Decladding process. The NSNFP has been tasked with identifying possible strategies for the deployment of these treatment processes in the event that the treatment path is deemed necessary. To support the siting studies of these strategies, economic evaluations are being performed to identify the least-cost deployment path. This model (tool) was developed to consider the full scope of costs, technical feasibility, process material disposition, and schedule attributes over the life of each deployment alternative. Using standard personal computer (PC) software, the model was developed as a comprehensive technology economic assessment tool using a Life-Cycle Cost (LCC) analysis methodology. Model development was planned as a systematic, iterative process of identifying and bounding the required activities to dispose of SNF. To support the evaluation process, activities are decomposed into lower level, easier to estimate activities. Sensitivity studies can then be performed on these activities, defining cost issues and testing results against the originally stated problem.

  4. Manufactured Homes Tool

    Energy Science and Technology Software Center

    2005-03-09

    The MH Tool software is designed to evaluate existing and new manufactured homes for structural adequacy in high winds. Users define design elements of a manufactured home and then select the hazard(s) for analysis. MH Tool then calculates and reports structural analysis results for the specified design and hazard Method of Solution: Design engineers input information (geometries, materials, etc.) describing the structure of a manufactured home, from which the software automatically creates a mathematical model.more » Windows, doors, and interior walls can be added to the initial design. HUD Code loads (wind, snow loads, interior live loads, etc.) are automatically applied. A finite element analysis is automatically performed using a third party solver to find forces and stresses throughout the structure. The designer may then employ components of strength (and cost) most appropriate for the loads that must be carried at each location, and then re-run the analysis for verification. If forces and stresses are still within tolerable limits (such as the HUD requirements), construction costs would be reduced without sacrificing quality.« less

  5. Land-Use Change and Bioenergy

    SciTech Connect

    2011-07-01

    This publication describes the Biomass Program’s efforts to examine the intersection of land-use change and bioenergy production. It describes legislation requiring land-use change assessments, key data and modeling challenges, and the research needs to better assess and understand the impact of bioenergy policy on land-use decisions.

  6. Pumping System Assessment Tool (PSAT)

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Pumping System Assessment Tool (PSAT) is a free online software tool to help industrial users assess the efficiency of pumping system operations. PSAT uses achievable pump performance data from...

  7. User Experience Research Online Tools

    Energy.gov [DOE]

    The Office of Energy Efficiency and Renewable Energy (EERE) has a variety of online tools to help you conduct user experience (UX) research. The following tools are free for use by staff and contractors who work on the EERE website.

  8. Wafer handling and placement tool

    DOEpatents

    Witherspoon, Linda L.

    1988-01-05

    A spring arm tool is provided for clamp engaging and supporting wafers while the tool is hand held. The tool includes a pair of relatively swingable jaw element supporting support arms and the jaw elements are notched to enjoy multiple point contact with a wafer peripheral portion. Also, one disclosed form of the tool includes remotely operable workpiece ejecting structure carried by the jaw elements thereof.

  9. Prioritization Tool Measurement Input Form

    Office of Energy Efficiency and Renewable Energy (EERE)

    BTO encourages stakeholders to recommend updates and improvements to the Prioritization Tool by using the below Measure Input Form.

  10. HPC_Tools-Gerber.pptx

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    6, 2012 * Introduction * Debugging * Performance / Optimization Outline Videos, presentations, and references: http://www.nersc.gov/users/training/courses/CS267/ Also see the DOE Advanced Computational Tools: http://acts.nersc.gov 3 * Today's Talks - Strategies for parallel performance (D. Skinner) - Debugging and optimization tools (R. Gerber) * Take Aways - Common problems to look out for - How tools work in general - A few specific tools you can try - Where to get more information

  11. EIS-0389: Final Environmental Impact Statement | Department of...

    Energy.gov [DOE] (indexed site)

    facilities in Trinity County, California. The U.S. Forest Service (USFS), the Bureau of Land Management (BLM), and the Bureau of Reclamation (Reclamation) participated in...

  12. Time Ordered Astrophysics Scalable Tools

    Energy Science and Technology Software Center

    2011-12-14

    This software package provides tools for astrophysical experiments which record data in the form of individual time streams from discrete detectors. TOAST provides tools from meta-data manipulation and job set up, I/O operation, telescope pointing reconstruction, and map-making. It also provides tools for constructing simulated observations.

  13. Transmission Planning Analysis Tool

    SciTech Connect

    2015-06-23

    Developed to solve specific problem: Assist transmission planning for regional transfers in interconnected power systems. This work was originated in a study for the U.S. Department of State, to recommend transmission reinforcements for the Central American regional system that interconnects 6 countries. Transmission planning analysis is currently performed by engineers with domainspecific and systemspecific knowledge without a unique methodology. The software codes of this disclosure assists engineers by defining systematic analysis procedures to help identify weak points and make decisions on transmission planning of regional interconnected power systems. Transmission Planning Analysis Tool groups PSS/E results of multiple AC contingency analysis and voltage stability analysis and QV analysis of many scenarios of study and arrange them in a systematic way to aid power system planning engineers or transmission operators in effective decision]making process or in the off]line study environment.

  14. Document Flowdown Tool

    SciTech Connect

    2010-12-31

    DFTool performs the following: ? A tool to conduct, capture, document, and manage a systematic review and flowdown of contractual requirements/documents to the site, facility, and project-level implementing documents. ? Ability to alert/email document owners to impending changes/updates and impacts to upper-level linked documents. ? Custom ability to generate reports and/or include custom functionalities based on other needs or consideration for site use. ? Ability to be accessed by all personnel (particularly document owners). ? Shows both document flow-up and flow-down. ? Provides visibility where links/flowdown does not currently exist or is incorrect so it can be changed/updated (no visibility currently exists). ? Ability to capture requirements and ultimately link to an existing/proven requirements-based commitment tracking system which can be used (electively) at the facility/organizational-level

  15. Document Flowdown Tool

    Energy Science and Technology Software Center

    2010-12-31

    DFTool performs the following: • A tool to conduct, capture, document, and manage a systematic review and flowdown of contractual requirements/documents to the site, facility, and project-level implementing documents. • Ability to alert/email document owners to impending changes/updates and impacts to upper-level linked documents. • Custom ability to generate reports and/or include custom functionalities based on other needs or consideration for site use. • Ability to be accessed by all personnel (particularly document owners). •more » Shows both document flow-up and flow-down. • Provides visibility where links/flowdown does not currently exist or is incorrect so it can be changed/updated (no visibility currently exists). • Ability to capture requirements and ultimately link to an existing/proven requirements-based commitment tracking system which can be used (electively) at the facility/organizational-level« less

  16. Transmission Planning Analysis Tool

    Energy Science and Technology Software Center

    2015-06-23

    Developed to solve specific problem: Assist transmission planning for regional transfers in interconnected power systems. This work was originated in a study for the U.S. Department of State, to recommend transmission reinforcements for the Central American regional system that interconnects 6 countries. Transmission planning analysis is currently performed by engineers with domainspecific and systemspecific knowledge without a unique methodology. The software codes of this disclosure assists engineers by defining systematic analysis procedures to help identifymore » weak points and make decisions on transmission planning of regional interconnected power systems. Transmission Planning Analysis Tool groups PSS/E results of multiple AC contingency analysis and voltage stability analysis and QV analysis of many scenarios of study and arrange them in a systematic way to aid power system planning engineers or transmission operators in effective decision]making process or in the off]line study environment.« less

  17. Outyear Budgeting Tool

    Energy Science and Technology Software Center

    2010-12-31

    OBTool performs the following: • Consistent method and tool to develop/estimate fiscal year (FY) 2010 and outyear budget/estimates • Maintain configuration control on resource rates and changes to outyear budget estimates, while allowing for accessibility, accountability, and tracking shared access between program managers, facility managers (FMs), project managers (PMs), cost account managers (CAMs), and project controls engineers (PCEs) • Consistency in budget estimating methodology, including scope, requirements, basis of estimates, resources, activities, escalation, and presentationmore » of documentation in tasks and execution plans and reports • Ability to sync (i.e. export) and import data into Primavera and Cobra to the lifecycle baseline file« less

  18. Tools for Understanding Identity

    SciTech Connect

    Creese, Sadie; Gibson-Robinson, Thomas; Goldsmith, Michael; Hodges, Duncan; Kim, Dee DH; Love, Oriana J.; Nurse, Jason R.; Pike, William A.; Scholtz, Jean

    2013-12-28

    Identity attribution and enrichment is critical to many aspects of law-enforcement and intelligence gathering; this identity typically spans a number of domains in the natural-world such as biographic information (factual information – e.g. names, addresses), biometric information (e.g. fingerprints) and psychological information. In addition to these natural-world projections of identity, identity elements are projected in the cyber-world. Conversely, undesirable elements may use similar techniques to target individuals for spear-phishing attacks (or worse), and potential targets or their organizations may want to determine how to minimize the attack surface exposed. Our research has been exploring the construction of a mathematical model for identity that supports such holistic identities. The model captures the ways in which an identity is constructed through a combination of data elements (e.g. a username on a forum, an address, a telephone number). Some of these elements may allow new characteristics to be inferred, hence enriching the holistic view of the identity. An example use-case would be the inference of real names from usernames, the ‘path’ created by inferring new elements of identity is highlighted in the ‘critical information’ panel. Individual attribution exercises can be understood as paths through a number of elements. Intuitively the entire realizable ‘capability’ can be modeled as a directed graph, where the elements are nodes and the inferences are represented by links connecting one or more antecedents with a conclusion. The model can be operationalized with two levels of tool support described in this paper, the first is a working prototype, the second is expected to reach prototype by July 2013: Understanding the Model The tool allows a user to easily determine, given a particular set of inferences and attributes, which elements or inferences are of most value to an investigator (or an attacker). The tool is also able to take

  19. Climate Data Analysis Tools

    Energy Science and Technology Software Center

    2009-12-01

    Climate Data Analysis Tools (CDAT) is a software infrastructure that uses an object-oriented scripting language to link together separate software subsystems and packages thus forming an integrated environment for solving model diagnosis problems, The power of the system comes from Python and its ability to seamlissly interconnect software. Python provides a general purpose and full-featured scripting language with a variety of user interfaces including command-line interaction, stand-alone scripts (applications) and fraphical user interfaces (GUI). Themore » CDAT subsystems, implemented as modules, provide access to and management of gridded data (Climate Data Management Systems or CDMS); large-array numerical operations (Numerical Python); and visualization (Visualization and Control System or VCS).« less

  20. Bio Risk Assessment Tool

    Energy Science and Technology Software Center

    2004-07-22

    The Biosecurity Risk Assessment Tool (BRAT) is a new type of computer application for the screening-level assessment of risk to dairy operations. BRAT for Dairies is designed to be intuitive and easy to use. Users enter basic data-property address, feed management, employee population, and so on - into the interface. Using these data and rules found in an expert system. BRAT for Dairies consults appropriate sections of its database. The expert system determines the riskmore » implications of the basic data, e.g. diseases are closely tied to pen location with respect to the outside world, When the analysis is complete, BRAT for Dairies evaluates and allocates the risk for each hazard, ranks the risks, and displays the results graphically.« less

  1. S. 3168: A Bill to amend the Surface Mining Control and Reclamation Act of 1977 to improve control of acid mine drainage, and for other purposes. Introduced in the Senate of the United States, August 11, 1992

    SciTech Connect

    Not Available

    1992-01-01

    This Act may be cited as the [open quotes]Acid Mine Drainage Abatement Act of 192[close quotes]. The purpose of this bill is to amend the Surface Mining Control and Reclamation Act of 1977 to improve control of acid mine drainage, and for other purposes. The proposed amendments are listed.

  2. Webtrends Archives by Fiscal Year - Topic Landing Pages | Department...

    Energy.gov [DOE] (indexed site)

    topic landing pages by fiscal year. Topic Landing Pages FY10 (2.04 MB) Topic Landing Pages FY11 (2.02 MB) Topic Landing Pages FY12-FY13 (366.66 KB) More Documents & Publications ...

  3. Downhole tool adapted for telemetry

    DOEpatents

    Hall, David R.; Fox, Joe

    2010-12-14

    A cycleable downhole tool such as a Jar, a hydraulic hammer, and a shock absorber adapted for telemetry. This invention applies to other tools where the active components of the tool are displaced when the tool is rotationally or translationally cycled. The invention consists of inductive or contact transmission rings that are connected by an extensible conductor. The extensible conductor permits the transmission of the signal before, after, and during the cycling of the tool. The signal may be continuous or intermittent during cycling. The invention also applies to downhole tools that do not cycle, but in operation are under such stress that an extensible conductor is beneficial. The extensible conductor may also consist of an extensible portion and a fixed portion. The extensible conductor also features clamps that maintain the conductor under stresses greater than that seen by the tool, and seals that are capable of protecting against downhole pressure and contamination.

  4. Wind Development on Tribal Lands

    SciTech Connect

    Ken Haukaas; Dale Osborn; Belvin Pete

    2008-01-18

    Background: The Rosebud Sioux Tribe (RST) is located in south central South Dakota near the Nebraska border. The nearest community of size is Valentine, Nebraska. The RST is a recipient of several Department of Energy grants, written by Distributed Generation Systems, Inc. (Disgen), for the purposes of assessing the feasibility of its wind resource and subsequently to fund the development of the project. Disgen, as the contracting entity to the RST for this project, has completed all the pre-construction activities, with the exception of the power purchase agreement and interconnection agreement, to commence financing and construction of the project. The focus of this financing is to maximize the economic benefits to the RST while achieving commercially reasonable rates of return and fees for the other parties involved. Each of the development activities required and its status is discussed below. Land Resource: The Owl Feather War Bonnet 30 MW Wind Project is located on RST Tribal Trust Land of approximately 680 acres adjacent to the community of St. Francis, South Dakota. The RST Tribal Council has voted on several occasions for the development of this land for wind energy purposes, as has the District of St. Francis. Actual footprint of wind farm will be approx. 50 acres. Wind Resource Assessment: The wind data has been collected from the site since May 1, 2001 and continues to be collected and analyzed. The latest projections indicate a net capacity factor of 42% at a hub height of 80 meters. The data has been collected utilizing an NRG 9300 Data logger System with instrumentation installed at 30, 40 and 65 meters on an existing KINI radio tower. The long-term annual average wind speed at 65-meters above ground level is 18.2 mph (8.1 mps) and 18.7 mph (8.4 mps) at 80-meters agl. The wind resource is excellent and supports project financing.

  5. PD and CL Tool

    Energy Science and Technology Software Center

    2007-03-01

    This software is a tool used to quickly solve for probability of success and confidence calculations for binomial data. This is the equation that allows the calculation of confidence level based on the target probability of success, the number of trials in a test and the number of misses (failed trials) allowed in a test plan. This equation is difficult to use and for plans other than when the number of misses allowed is zeromore » the equation cannot be solved algebraically for the number of trials required. The equation then has to be solved numerically for the number or required trials by repeatedly guessing numbers of trials and solving the equation until the confidence level is met or exceeded. This process is tiresome when done manually but the equation is easily programmed into a computer. Tables of these results can be found in statistical texts and on the internet. This software program allows the user to quickly solve the equation by plugging in the known values and solving the equation.« less

  6. Tool and Fixture Design

    SciTech Connect

    Graham, Mark W.

    2015-07-28

    In a manufacturing process, a need is identified and a product is created to fill this need. While design and engineering of the final product is important, the tools and fixtures that aid in the creation of the final product are just as important, if not more so. Power supplies assembled at the TA-55 PF-5 have been designed by an excellent engineering team. The task in PF-5 now is to ensure that all steps of the assembly and manufacturing process can be completed safely, reliably, and in a quality repeatable manner. One of these process steps involves soldering fine wires to an electrical connector. During the process development phase, the method of soldering included placing the power supply in a vice in order to manipulate it into a position conducive to soldering. This method is unacceptable from a reliability, repeatability, and ergonomic standpoint. To combat these issues, a fixture was designed to replace the current method. To do so, a twelve step engineering design process was used to create the fixture that would provide a solution to a multitude of problems, and increase the safety and efficiency of production.

  7. Definitions - R

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    computer system with logs and indices to track the condition of the system. Reclamation See U.S. Bureau of Reclamation. reclamation The restoration of land to resemble its...

  8. Demand Response Quick Assessment Tool

    Energy Science and Technology Software Center

    2008-12-01

    DRQAT (Demand Response Quick Assessment Tool) is the tool for assessing demand response saving potentials for large commercial buildings. This tool is based on EnergyPlus simulations of prototypical buildings and HVAC equipment. The opportunities for demand reduction and cost savings with building demand responsive controls vary tremendously with building type and location. The assessment tools will predict the energy and demand savings, the economic savings, and the thermal comfor impact for various demand responsive strategies.more » Users of the tools will be asked to enter the basic building information such as types, square footage, building envelope, orientation, utility schedule, etc. The assessment tools will then use the prototypical simulation models to calculate the energy and demand reduction potential under certain demand responsive strategies, such as precooling, zonal temperature set up, and chilled water loop and air loop set points adjustment.« less

  9. Computers as tools

    SciTech Connect

    Eriksson, I.V.

    1994-12-31

    The following message was recently posted on a bulletin board and clearly shows the relevance of the conference theme: {open_quotes}The computer and digital networks seem poised to change whole regions of human activity -- how we record knowledge, communicate, learn, work, understand ourselves and the world. What`s the best framework for understanding this digitalization, or virtualization, of seemingly everything? ... Clearly, symbolic tools like the alphabet, book, and mechanical clock have changed some of our most fundamental notions -- self, identity, mind, nature, time, space. Can we say what the computer, a purely symbolic {open_quotes}machine,{close_quotes} is doing to our thinking in these areas? Or is it too early to say, given how much more powerful and less expensive the technology seems destinated to become in the next few decades?{close_quotes} (Verity, 1994) Computers certainly affect our lives and way of thinking but what have computers to do with ethics? A narrow approach would be that on the one hand people can and do abuse computer systems and on the other hand people can be abused by them. Weli known examples of the former are computer comes such as the theft of money, services and information. The latter can be exemplified by violation of privacy, health hazards and computer monitoring. Broadening the concept from computers to information systems (ISs) and information technology (IT) gives a wider perspective. Computers are just the hardware part of information systems which also include software, people and data. Information technology is the concept preferred today. It extends to communication, which is an essential part of information processing. Now let us repeat the question: What has IT to do with ethics? Verity mentioned changes in {open_quotes}how we record knowledge, communicate, learn, work, understand ourselves and the world{close_quotes}.

  10. Analysis Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Analysis Tools Analysis Tools The Department of Energy's Vision Create a set of interoperable tools that provide insight on building energy performance and drive action in the market. The Problem A lot of data. More buildings are creating energy data now than ever before, due to advances in technology, markets, and policies. While data in some areas, such as energy consumption, is becoming easier to collect, other types of data, such as physical attributes, is still hard to collect. But a lack

  11. Analytical Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Information Resources » Analytical Tools Analytical Tools The Bioenergy Technologies Office and its national lab partners provide a variety of online tools to help analyze data and facilitate decision making. This page links to several of them and includes a widget that calculates the potential volume of ethanol produced from biomass feedstocks. Knowledge Discovery Framework (KDF): The Bioenergy Knowledge Discovery Framework (KDF) facilitates informed decision making by providing a means to

  12. Energy Transition Initiative Energy Scenario Tool | Department...

    Energy Saver

    Energy Transition Initiative Energy Scenario Tool Energy Transition Initiative Energy Scenario Tool The ETI Energy Scenario Tool helps communities analyze different pathways to ...

  13. Documenting stone age cleverness by tool development

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Documenting stone age cleverness by tool development Ancient stone tools show the pace of remarkable technological enhancements over time. March 7, 2013 Ancient stone tools showing ...

  14. Cool Farm Tool | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    aboutussuppliersustainablesourcingtools?WT.LHNAV Cost: Free Language: English Cool Farm Tool Screenshot References: Cool Farm Tool 1 Overview "The Cool Farm Tool...

  15. Slide system for machine tools

    DOEpatents

    Douglass, Spivey S.; Green, Walter L.

    1982-01-01

    The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

  16. Slide system for machine tools

    DOEpatents

    Douglass, S.S.; Green, W.L.

    1980-06-12

    The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

  17. Analysis of Cluster Management Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Analysis of Configuration Management Tools Computer System, Cluster, and Networking Summer Institute Team: Evan Leeseberg, James Kang, Katherine Nystrom Mentors: Kevin Tegtmeier,...

  18. ARM - Lesson Plans: When Land Ice Melts

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    When Land Ice Melts Outreach Home Room News Publications Traditional Knowledge Kiosks Barrow, Alaska Tropical Western Pacific Site Tours Contacts Students Study Hall About ARM Global Warming FAQ Just for Fun Meet our Friends Cool Sites Teachers Teachers' Toolbox Lesson Plans Lesson Plans: When Land Ice Melts Objective The objective of this activity is to demonstrate what happens when land ice melts and how it is different from the effect of melting icebergs. Materials A big rectangular container

  19. Tool for remotely determining the position of a device in an underwater well assembly

    SciTech Connect

    Valka, W.A.

    1981-11-17

    A tool is designed for giving remote indications, typically both a change in fluid pressure and a televised image, to check whether a device is in a desired position. The invention is particularly useful for checking whether a component, such as a pipe hanger, has been properly landed in an underwater well installation.

  20. LANL Land Transfers 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Land Transfers 2015 LANL Land Transfers 2015 Land transfer activities are planned to occur fiscal year 2016 which will require independent verification of Los Alamos National Laboratory (LANL)'s sampling protocol and analyses. The former Sewage Treatment Plant within land tract A-16-D and the southern portion of A-16-E are on track for MARSSIM final status survey. The remainder of TA-21 will require verification once final D&D of structures is complete. The sampling activities for these

  1. Renewable Energy Development on Tribal Lands

    SciTech Connect

    Not Available

    2006-10-01

    Brochure describes the Tribal Energy Program, which provides American Indian tribes with financial and technical assistance for developing renewable energy projects on tribal land.

  2. Renewable Energy Development on Tribal Lands (Brochure)

    SciTech Connect

    2009-01-18

    Brochure describes the Tribal Energy Program, which provides American Indian tribes with financial and technical assistance for developing renewable energy projects on tribal land.

  3. Agriculture, land use, and commercial biomass energy

    SciTech Connect

    Edmonds, J.A.; Wise, M.A.; Sands, R.D.; Brown, R.A.; Kheshgi, H.

    1996-06-01

    In this paper we have considered commercial biomass energy in the context of overall agriculture and land-use change. We have described a model of energy, agriculture, and land-use and employed that model to examine the implications of commercial biomass energy or both energy sector and land-use change carbon emissions. In general we find that the introduction of biomass energy has a negative effect on the extent of unmanaged ecosystems. Commercial biomass introduces a major new land use which raises land rental rates, and provides an incentive to bring more land into production, increasing the rate of incursion into unmanaged ecosystems. But while the emergence of a commercial biomass industry may increase land-use change emissions, the overall effect is strongly to reduce total anthropogenic carbon emissions. Further, the higher the rate of commercial biomass energy productivity, the lower net emissions. Higher commercial biomass energy productivity, while leading to higher land-use change emissions, has a far stronger effect on fossil fuel carbon emissions. Highly productive and inexpensive commercial biomass energy technologies appear to have a substantial depressing effect on total anthropogenic carbon emissions, though their introduction raises the rental rate on land, providing incentives for greater rates of deforestation than in the reference case.

  4. Bureau of Land Management - Final Programmatic Environmental...

    OpenEI (Open Energy Information) [EERE & EIA]

    to: navigation, search OpenEI Reference LibraryAdd to library Report: Bureau of Land Management - Final Programmatic Environmental Impact Statement for Geothermal Leasing in the...

  5. LANDS WITH WILDERNESS CHARACTERISTICS, RESOURCE MANAGEMENT PLAN...

    Office of Scientific and Technical Information (OSTI)

    AND LAND EXCHANGES: CROSS-JURISDICTIONAL MANAGEMENT AND IMPACTS ON UNCONVENTIONAL FUEL DEVELOPMENT IN UTAH'S UINTA BASIN Utah is rich in oil shale and oil sands resources. ...

  6. MotorMaster+ Tool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    MotorMaster+ Tool MotorMaster+ Tool This presentation discusses industrial motor systems and introduces the MotorMaster+ Tool Suite. MotorMaster+ Tool Presentation (March 19, 2009) ...

  7. Form:Tool | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Tool (Redirected from Form:Software Tool) Jump to: navigation, search Input your tool name below to add to the registry. If the tool is already in the registry, you will be able to...

  8. Vehicle assisted harpoon breaching tool

    DOEpatents

    Pacheco, James E.; Highland, Steven E.

    2011-02-15

    A harpoon breaching tool that allows security officers, SWAT teams, police, firemen, soldiers, or others to forcibly breach metal doors or walls very quickly (in a few seconds), without explosives. The harpoon breaching tool can be mounted to a vehicle's standard receiver hitch.

  9. Battery switch for downhole tools

    DOEpatents

    Boling, Brian E.

    2010-02-23

    An electrical circuit for a downhole tool may include a battery, a load electrically connected to the battery, and at least one switch electrically connected in series with the battery and to the load. The at least one switch may be configured to close when a tool temperature exceeds a selected temperature.

  10. High Performance Tools And Technologies

    SciTech Connect

    Collette, M R; Corey, I R; Johnson, J R

    2005-01-24

    This goal of this project was to evaluate the capability and limits of current scientific simulation development tools and technologies with specific focus on their suitability for use with the next generation of scientific parallel applications and High Performance Computing (HPC) platforms. The opinions expressed in this document are those of the authors, and reflect the authors' current understanding and functionality of the many tools investigated. As a deliverable for this effort, we are presenting this report describing our findings along with an associated spreadsheet outlining current capabilities and characteristics of leading and emerging tools in the high performance computing arena. This first chapter summarizes our findings (which are detailed in the other chapters) and presents our conclusions, remarks, and anticipations for the future. In the second chapter, we detail how various teams in our local high performance community utilize HPC tools and technologies, and mention some common concerns they have about them. In the third chapter, we review the platforms currently or potentially available to utilize these tools and technologies on to help in software development. Subsequent chapters attempt to provide an exhaustive overview of the available parallel software development tools and technologies, including their strong and weak points and future concerns. We categorize them as debuggers, memory checkers, performance analysis tools, communication libraries, data visualization programs, and other parallel development aides. The last chapter contains our closing information. Included with this paper at the end is a table of the discussed development tools and their operational environment.

  11. Rib forming tool for tubing

    DOEpatents

    Rowley, James P.; Lewandowski, Edward F.; Groh, Edward F.

    1976-01-01

    Three cylindrical rollers are rotatably mounted equidistant from the center of a hollow tool head on radii spaced 120.degree. apart. Each roller has a thin flange; the three flanges lie in a single plane to form an internal circumferential rib in a rotating tubular workpiece. The tool head has two complementary parts with two rollers in one part of the head and one roller in the other part; the two parts are joined by a hinge. A second hinge, located so the rollers are between the two hinges, connects one of the parts to a tool bar mounted in a lathe tool holder. The axes of rotation of both hinges and all three rollers are parallel. A hole exposing equal portions of the three roller flanges is located in the center of the tool head. The two hinges permit the tool head to be opened and rotated slightly downward, taking the roller flanges out of the path of the workpiece which is supported on both ends and rotated by the lathe. The parts of the tool head are then closed on the workpiece so that the flanges are applied to the workpiece and form the rib. The tool is then relocated for forming of the next rib.

  12. Tools for OpenMP

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    OpenMP Tools for OpenMP Some tools for tuning OpenMP codes to get better performance are: Use Intel Advisor for Threading Design and Vectorization. Use Intel Inspector to Detect Threading and Memory Issues. Use Intel VTune for Performance Tuning. Use Cray Reveal to Insert OpenMP Directives. Last edited: 2016-08-26 11:49:18

  13. The Continuously Evolving Land Use Control Climate in FUSRAP - 12285

    SciTech Connect

    Ewy, Ann; Waples, Richard

    2012-07-01

    In recent years the topic of Land Use Controls (LUCs) has become much more prevalent in the Formerly Utilized Sites Remedial Action Program (FUSRAP) for a number of reasons. Some regulatory agencies have been placing much more emphasis on this topic than they historically did. Also as the FUSRAP has matured, more sites are approaching a point in the project lifecycle that LUCs are needed to be implemented. There are many issues, some site specific, some agency specific, and some programmatic, that may arise when addressing LUCs on a FUSRAP site. These issues can span the life of a project from planning to implementation. As the emphasis on LUCs increases at a fast pace, USACE is faced with the task of developing consistency in how we respond, and at the same time leaving enough latitude for projects to accomplish their individual missions while taking into consideration the site specific concerns. The Land Use Controls arena encompasses a large number of tools to address the matter at hand. There are numerous mechanisms that can accomplish Land Use Control goals, some of which include administrative controls and engineering controls. This paper will discuss some of the mechanisms being utilized by USACE at our FUSRAP projects. Having a better understanding of how LUCs are currently being handled in the FUSRAP will be beneficial to project delivery teams in order to make the best decisions moving through the project lifecycle. Being aware of LUC requirements and options at an early stage in a project will help a team effectively plan for and execute the chosen alternative for remedial action. There are a number of guidance tools from various other agencies that exist for consideration during Land Use Control planning and implementation. The USACE is currently evaluating these guidance tools to determine applicability and impact to FUSRAP projects. Some of these tools are under review at Army and the Department of Defense. Critical to this evaluation is internal team

  14. Navajo Hopi Land Commission Office (NHLCO): Navajo Hopi Land Commission Office (NHLCO)- 2012 Project

    Energy.gov [DOE]

    The Navajo Hopi Land Commission (NHLCO), together with its partners, will conduct a feasibility study (FS) of a program to develop renewable energy on the Paragon-Bisti ranch lands in northwestern New Mexico, which were set aside under the Navajo-Hopi Land Settlement Act for the benefit of relocatees (defined as Navajo families living on Hopi Partitioned Lands as of December 22, 1974).

  15. Logistics Process Analysis ToolProcess Analysis Tool

    Energy Science and Technology Software Center

    2008-03-31

    LPAT is the resulting integrated system between ANL-developed Enhanced Logistics Intra Theater Support Tool (ELIST) sponsored by SDDC-TEA and the Fort Future Virtual Installation Tool (sponsored by CERL). The Fort Future Simulation Engine was an application written in the ANL Repast Simphony framework and used as the basis for the process Anlysis Tool (PAT) which evolved into a stand=-along tool for detailed process analysis at a location. Combined with ELIST, an inter-installation logistics component wasmore » added to enable users to define large logistical agent-based models without having to program. PAT is the evolution of an ANL-developed software system called Fort Future Virtual Installation Tool (sponsored by CERL). The Fort Future Simulation Engine was an application written in the ANL Repast Simphony framework and used as the basis for the Process Analysis Tool(PAT) which evolved into a stand-alone tool for detailed process analysis at a location (sponsored by the SDDC-TEA).« less

  16. New Modeling Tool Analyzes Floating Platform Concepts for Offshore Wind Turbines (Fact Sheet)

    SciTech Connect

    Not Available

    2011-02-01

    Researchers at the National Renewable Energy Laboratory (NREL) developed a new complex modeling and analysis tool capable of analyzing floating platform concepts for offshore wind turbines. The new modeling tool combines the computational methodologies used to analyze land-based wind turbines with the comprehensive hydrodynamic computer programs developed for offshore oil and gas industries. This new coupled dynamic simulation tool will enable the development of cost-effective offshore technologies capable of harvesting the rich offshore wind resources at water depths that cannot be reached using the current technology.

  17. Information Technology Tools for Multifamily Building Programs...

    Energy Saver

    Information Technology Tools for Multifamily Building Programs Information Technology Tools for Multifamily Building Programs Better Buildings Neighborhood Program Multifamily ...

  18. Oak Ridge reservation land-use plan

    SciTech Connect

    Bibb, W. R.; Hardin, T. H.; Hawkins, C. C.; Johnson, W. A.; Peitzsch, F. C.; Scott, T. H.; Theisen, M. R.; Tuck, S. C.

    1980-03-01

    This study establishes a basis for long-range land-use planning to accommodate both present and projected DOE program requirements in Oak Ridge. In addition to technological requirements, this land-use plan incorporates in-depth ecological concepts that recognize multiple uses of land as a viable option. Neither environmental research nor technological operations need to be mutually exclusive in all instances. Unique biological areas, as well as rare and endangered species, need to be protected, and human and environmental health and safety must be maintained. The plan is based on the concept that the primary use of DOE land resources must be to implement the overall DOE mission in Oak Ridge. This document, along with the base map and overlay maps, provides a reasonably detailed description of the DOE Oak Ridge land resources and of the current and potential uses of the land. A description of the land characteristics, including geomorphology, agricultural productivity and soils, water courses, vegetation, and terrestrial and aquatic animal habitats, is presented to serve as a resource document. Essentially all DOE land in the Oak Ridge area is being fully used for ongoing DOE programs or has been set aside as protected areas.

  19. Electrical contact tool set station

    DOEpatents

    Byers, M.E.

    1988-02-22

    An apparatus is provided for the precise setting to zero of electrically conductive cutting tools used in the machining of work pieces. An electrically conductive cylindrical pin, tapered at one end to a small flat, rests in a vee-shaped channel in a base so that its longitudinal axis is parallel to the longitudinal axis of the machine's spindle. Electronic apparatus is connected between the cylindrical pin and the electrically conductive cutting tool to produce a detectable signal when contact between tool and pin is made. The axes of the machine are set to zero by contact between the cutting tool and the sides, end or top of the cylindrical pin. Upon contact, an electrical circuit is completed, and the detectable signal is produced. The tool can then be set to zero for that axis. Should the tool contact the cylindrical pin with too much force, the cylindrical pin would be harmlessly dislodged from the vee-shaped channel, preventing damage either to the cutting tool or the cylindrical pin. 5 figs.

  20. Selecting reasonable future land use scenarios

    SciTech Connect

    Allred, W.E.; Smith, R.W.

    1995-12-31

    This paper examines a process to help select the most reasonable future land use scenarios for hazardous waste and/or low-level radioactive waste disposal sites. The process involves evaluating future land use scenarios by applying selected criteria currently used by commercial mortgage companies to determine the feasibility of obtaining a loan for purchasing such land. The basis for the process is that only land use activities for which a loan can be obtained will be considered. To examine the process, a low-level radioactive waste site, the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory, is used as an example. The authors suggest that the process is a very precise, comprehensive, and systematic (common sense) approach for determining reasonable future use of land. Implementing such a process will help enhance the planning, decisionmaking, safe management, and cleanup of present and future disposal facilities.

  1. Tool Basics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Commercial Buildings » Analysis Tools » Energy Asset Score » Tool Basics Tool Basics Asset Score Scale The Asset Score uses a 10-point scale to evaluate the energy efficiency of a building's physical characteristics and major energy-related systems. The point value is assigned based on a building's predicted source energy use intensity (EUI) according to the energy simulation results. Scores are rounded to the nearest half-point increment (i.e., "6", "6.5", "7",

  2. Land application uses for dry FGD by-products. Phase 2 report

    SciTech Connect

    Stehouwer, R.; Dick, W.; Bigham, J.

    1996-03-01

    A study was initiated in December 1990 to demonstrate large volume beneficial uses of flue gas desulfurization (FGD) by-products. A Phase 1 report provided results of an extensive characterization of chemical, physical, mineralogical and engineering properties of 58 dry FGD by-product samples. The Phase 1 report concluded that high volume beneficial reuses will depend on the economics related to their ability to substitute for existing materials for various types of applications (e.g. as an agricultural liming material, soil borrow for highway embankment construction, and reclamation of active and abandoned surface coal mine lands). Phase 2 objectives were (1) to conduct laboratory and greenhouse studies of FGD and soil (spoil) mixtures for agronomic and engineering applications, (2) to initiate field studies related to high volume agronomic and engineering uses, and (3) to develop the basic methodological framework for estimation of the financial and economic costs and benefits to society of several FGD reuse options and to make some preliminary runs of economic models. High volume beneficial reuses of dry FGD by-products have been successfully demonstrated. Adverse environmental impacts have been negligible. Although few sources of dry FGD by-products currently exist in Ohio and the United States there is potential for smaller coal-fired facilities to adopt S0{sub 2} scrubbing technologies that produce dry FGD material. Also much of what we have learned from studies on dry FGD by-products is applicable to the more prevalent wet FGD by-products. The adaptation of the technologies demonstrated in this project seem to be not only limited by economic constraints, but even more so, by the need to create awareness of the market potential of using these FGD by-products.

  3. Tool | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    by Graham7781(2017) Super contributor 26 June, 2013 - 09:17 NREL's Energy Databus storing big energy data campus databus energy meter data NREL OpenEI Tool The Energy Databus began...

  4. Human Factors Engineering Analysis Tool

    Energy Science and Technology Software Center

    2002-03-04

    HFE-AT is a human factors engineering (HFE) software analysis tool (AT) for human-system interface design of process control systems, and is based primarily on NUREG-0700 guidance.

  5. DC Pro Software Tool Suite

    SciTech Connect

    2009-04-01

    This fact sheet describes how DOE's Data Center Energy Profiler (DC Pro) Software Tool Suite and other resources can help U.S. companies identify ways to improve the efficiency of their data centers.

  6. Management System Verification (MSV) Tool

    Energy.gov [DOE]

    The MSV process developed by ACC is a tool (not a requirement) that DOE sites may consider to help determine whether their ES&H program is truly integrated into all work at all levels by all employees.

  7. Fan System Assessment Tool Introduction

    Energy.gov [DOE]

    This presentation provides an introduction to the Fan System Assessment Tool (FSAT). With FSAT, users can calculate the amount of energy used by their fan system; determine system efficiency; and quantify the savings potential of an upgraded system.

  8. Collaboration Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Information Systems » Collaboration Tools Collaboration Tools Collaboration is much more than just sharing information. It is a form of teamwork and a process of exchanging ideas that positively impacts progress. While it is relatively easy to collaborate with your peers in the office, effective collaboration is difficult to achieve within distributed teams without use of technology. In order to bridge the distance between project teams, Office of Project Management Oversight & Assessments

  9. Prototype simplified daylighting design tool

    SciTech Connect

    Treado, S.J.; Goodin, P.J.

    1992-07-01

    The report describes a prototype simplified design tool which has been developed to provide information for developing effective building fenestration systems. A computer software system was developed to search through and select the best available fenestration designs from a large database of previously simulated buildings. Fenestration designs can be selected based on energy usage, energy cost or peak loads. The determination of fenestration energy costs is discussed. The design tool is primarily intended for commercial, industrial or institutional buildings of any type.

  10. Supercooled liquid water Estimation Tool

    Energy Science and Technology Software Center

    2012-05-04

    The Cloud Supercooled liquid water Estimation Tool (SEET) is a user driven Graphical User Interface (GUI) that estimates cloud supercooled liquid water (SLW) content in terms of vertical column and total mass from Moderate resolution Imaging Supercooled liquid water Estimation Tool Spectroradiometer (MODIS) spatially derived cloud products and realistic vertical cloud parameterizations that are user defined. It also contains functions for post-processing of the resulting data in tabular and graphical form.

  11. Seal for fluid forming tools

    DOEpatents

    Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

    2012-03-20

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  12. Bonding Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bonding Tools Bonding Tools Bonds are one of the most common forms of financing used by state and local governments, because they are a low-cost source of capital available to most entities. State and local officials may consider using bonds for a variety of clean energy purposes, including: Financing a specific set of energy upgrades in their own facilities (can be combined with an energy savings performance contract) Capitalizing finance programs (e.g., revolving loan fund) for public sector

  13. Eastern Energy Zones Mapping Tool

    Energy.gov [DOE]

    The Eastern Interconnection States’ Planning Council (EISPC) has released the Energy Zones (EZ) Mapping Tool, a free, web-based interactive tool that will help states and other stakeholders in the Eastern Interconnection identify geographic areas suitable for the development of clean energy resources (natural gas, sequestration or utilitization locations for C02 from coal, nuclear, and renewable) which can potentially provide significant amounts of new electric power generation.

  14. Data and Tools | Bioenergy | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Data and Tools NREL provides data, tools, and models for analyzing bioenergy research and technologies, and for determining biomass resources and feedstocks. Laboratory Analytical Procedures NREL develops lab procedures to help researchers perform analyses for biofuels and bio-oils. Biomass Compositional Analysis Bio-Oil Analysis Microalgae Compositional Analysis Biomass Feedstock and Resource Assessment Data International Biomass Resource Assessments NREL has completed resource assessments in

  15. AIRMaster+ LogTool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    LogTool AIRMaster+ LogTool The AIRMaster+ LogTool is a companion tool to AIRMaster+ that helps industrial users determine the operating dynamics of a compressed system. Use the LogTool first to gather critical data in preparation for AIRMaster+. Then, input that data into AIRMaster+ to model existing and future compressed air system upgrades. LogTool V2 Install.zip (19.13 MB) More Documents & Publications AIRMaster+ Tool Introduction AIRMaster+ AIRMaster+ Fact Sheet

  16. Solar Development on Contaminated and Disturbed Lands

    SciTech Connect

    Macknick, Jordan; Lee, Courtney; Mosey, Gail; Melius, Jenny

    2013-12-01

    Land classified as contaminated and disturbed across the United States has the potential to host developments of utility-scale solar power. This report examines the prospect of developing utility- and commercial-scale concentrated solar power (CSP) and solar photovoltaics (PV) technologies on degraded and environmentally contaminated lands. The potential for solar development on contaminated anddisturbed lands was assessed, and for the largest and highest solar resource sites, the economic impacts and feasibility were evaluated. Developing solar power on contaminated and disturbed lands can help create jobs and revitalize local and state economies, and selecting these sites over greenfield sites can potentially have permitting and environmental mitigation advantages. The U.S.Department of Energy (DOE) SunShot goals call for 632 GW of PV and 83 GW of CSP to be deployed by 2050. Conservative land-use estimates of this study (10 acres per megawatt) show that there are disturbed and environmentally contaminated lands throughout the country that could be suitable for utility-scale solar power, and, that there is sufficient land area to meet SunShot solar deployment goals. The purpose of this assessment is to improve the understanding of these sites and facilitate solar developers' selection of contaminated and disturbed sites for development.

  17. Idaho State Board of Land Commissioners | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Board of Land Commissioners Jump to: navigation, search Logo: Idaho State Board of Land Commissioners Name: Idaho State Board of Land Commissioners Address: 300 N. 6th St, Suite...

  18. Nevada Division of State Lands | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    State Lands Jump to: navigation, search Logo: Nevada Division of State Lands Name: Nevada Division of State Lands Address: 901 S. Stewart St., Suite 5003 Place: Carson City, Nevada...

  19. VOCALS: The VAMOS Ocean-Cloud-Atmosphere-Land Study () | Data...

    Office of Scientific and Technical Information (OSTI)

    VOCALS: The VAMOS Ocean-Cloud-Atmosphere-Land Study Title: VOCALS: The VAMOS Ocean-Cloud-Atmosphere-Land Study VOCALS (VAMOS* Ocean-Cloud-Atmosphere-Land Study) is an international ...

  20. Sustainable Land Lab Tour | Photosynthetic Antenna Research Center

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Sustainable Land Lab Tour Sustainable Land Lab Tour PARC researchers and guests were taken on a tour of the new Sustainable land lab and shown the rennovations going on in North ...

  1. RAPID/Geothermal/Land Access/New Mexico | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Mexico State Land Office Competitive Land Leasing: Yes, New Mexico State Land Office issues geothermal leases through competitive auction. Noncompetitive Land Leasing: No Royalty...

  2. Report on the emergency response to the event on May 14, 1997, at the plutonuim reclamation facility, Hanford Site, Richland,Washington

    SciTech Connect

    Shoop, D.S.

    1997-08-20

    On the evening of May 14,1997, a chemical explosion Occurred at the Plutonium Reclamation Facility (PRF) in the 200 West Area(200-W) of the Hanford Site. The event warranted the declaration of an Alert emergency, activation of the Hanford Emergency Response Organization (BRO), and notification of offsite agencies. As a result of the emergency declaration, a subsequent evaluation was conducted to assess: 9 the performance of the emergency response organization o the occupational health response related to emergency activities o event notifications to offsite and environmental agencies. Additionally, the evaluation was designed to: 9 document the chronology of emergency and occupational health responses and environmental notifications connected with the explosion at the facility 0 assess the adequacy of the Hanford Site emergency preparedness activities; response readiness; and emergency management actions, occupational health, and environmental actions 0 provide an analysis of the causes of the deficiencies and weaknesses in the preparedness and response system that have been identified in the evaluation of the response a assign organizational responsibility to correct deficiencies and weaknesses a improve future performance 0 adjust elements of emergency implementing procedures and emergency preparedness activities.

  3. Accident investigation board report on the May 14, 1997, chemical explosion at the Plutonium Reclamation Facility, Hanford Site,Richland, Washington - final report

    SciTech Connect

    Gerton, R.E.

    1997-07-25

    On May 14, 1997, at 7:53 p.m. (PDT), a chemical explosion occur-red in Tank A- 109 in Room 40 of the Plutonium Reclamation Facility (Facility) located in the 200 West Area of the Hanford Site, approximately 30 miles north of Richland, Washington. The inactive processing Facility is part of the Plutonium Finishing Plant (PFP). On May 16, 1997, Lloyd L. Piper, Deputy Manager, acting for John D. Wagoner, Manager, U.S. Department of Energy (DOE), Richland Operations Office (RL), formally established an Accident Investigation Board (Board) to investigate the explosion in accordance with DOE Order 225. 1, Accident Investigations. The Board commenced its investigation on May 15, 1997, completed the investigation on July 2, 1997, and submitted its findings to the RL Manager on July 26, 1997. The scope of the Board`s investigation was to review and analyze the circumstances of the events that led to the explosion; to analyze facts and to determine the causes of the accident; and to develop conclusions and judgments of need that may help prevent a recurrence of the accident. The scope also included the application of lessons learned from similar accidents within DOE. In addition to this detailed report, a companion document has also been prepared that provides a concise summary of the facts and conclusions of this report, with an emphasis on management issues (DOE/RL-97-63).

  4. Design tools for passive solar applications

    SciTech Connect

    Balcomb, J.D.

    1986-04-01

    Examples of passive solar design tools are given, categorized as either evaluation tools or guidance tools. A trend toward microcomputer-based tools is noted; however, these are usually developed for use by engineers rather than architects. The need for more instructive tools targeted specifically to designers is emphasized.

  5. AIRMaster+ Software Tool Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Software Tool Brochure AIRMaster+ Software Tool Brochure Brochure that provides information on AMO's AIRMaster+ software tool, including how it works, next steps, and how to access the tool. AIRMaster+ Brochure (2.85 MB) More Documents & Publications AIRMaster+ Tool Introduction AIRMaster+ Fact Sheet AIRMaster+

  6. Tool calibration system for micromachining system

    DOEpatents

    Miller, Donald M.

    1979-03-06

    A tool calibration system including a tool calibration fixture and a tool height and offset calibration insert for calibrating the position of a tool bit in a micromachining tool system. The tool calibration fixture comprises a yokelike structure having a triangular head, a cavity in the triangular head, and a port which communicates a side of the triangular head with the cavity. Yoke arms integral with the triangular head extend along each side of a tool bar and a tool head of the micromachining tool system. The yoke arms are secured to the tool bar to place the cavity around a tool bit which may be mounted to the end of the tool head. Three linear variable differential transformer's (LVDT) are adjustably mounted in the triangular head along an X axis, a Y axis, and a Z axis. The calibration insert comprises a main base which can be mounted in the tool head of the micromachining tool system in place of a tool holder and a reference projection extending from a front surface of the main base. Reference surfaces of the calibration insert and a reference surface on a tool bar standard length are used to set the three LVDT's of the calibration fixture to the tool reference position. These positions are transferred permanently to a mastering station. The tool calibration fixture is then used to transfer the tool reference position of the mastering station to the tool bit.

  7. Utah Public Lands Policy Coordination Office | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Lands Policy Coordination Office Jump to: navigation, search Name: Governor's Public Lands Policy Coordination Office Address: 5110 State Office Building Place: Salt Lake City,...

  8. Bayesian Calibration of the Community Land Model using Surrogates...

    Office of Scientific and Technical Information (OSTI)

    Bayesian Calibration of the Community Land Model using Surrogates Citation Details In-Document Search Title: Bayesian Calibration of the Community Land Model using Surrogates We ...

  9. Approaches used for Clearance of Lands from Nuclear Facilities...

    Energy Saver

    Approaches used for Clearance of Lands from Nuclear Facilities among Several Countries: Evaluation for Regulatory Input Approaches used for Clearance of Lands from Nuclear ...

  10. Vectorizing the Community Land Model (CLM) (Journal Article)...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Vectorizing the Community Land Model (CLM) Citation Details In-Document Search Title: Vectorizing the Community Land Model (CLM) In this paper we describe our...

  11. ORS 197 - Comprehensive Land Use Planning | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    197 - Comprehensive Land Use Planning Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: ORS 197 - Comprehensive Land Use...

  12. RAPID/Geothermal/Land Access/Utah | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    RAPIDGeothermalLand AccessUtah < RAPID | Geothermal | Land Access Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk...

  13. Hawaii's Rainforest Crunch: Land, People, and Geothermal Development...

    OpenEI (Open Energy Information) [EERE & EIA]

    Rainforest Crunch: Land, People, and Geothermal Development Jump to: navigation, search OpenEI Reference LibraryAdd to library Periodical: Hawaii's Rainforest Crunch: Land, People,...

  14. California Land Use Planning Information Network | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Land Use Planning Information Network Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: California Land Use Planning Information...

  15. Beijing Ideal land Technology Development Co Ltd | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Ideal land Technology Development Co Ltd Jump to: navigation, search Name: Beijing Ideal-land Technology Development Co Ltd Place: China Sector: Biofuels Product: Biofuels (...

  16. Geothermal/Land Use Planning | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    GeothermalLand Use Planning < Geothermal Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Land Use Planning Leasing Exploration Well Field Power Plant Grid Connection...

  17. Hawaii Department of Land and Natural Resources | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Logo: Hawaii Department of Land and Natural Resources Name: Hawaii Department of Land and Natural Resources Address: 1151 Punchbowl St Place: Honolulu, Hawaii Zip: 96813 Website:...

  18. RAPID/Geothermal/Land Access/Nevada | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    RAPIDGeothermalLand AccessNevada < RAPID | Geothermal | Land Access Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk...

  19. Montana - Land Use License Application | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Land Use License Application Jump to: navigation, search OpenEI Reference LibraryAdd to library General: Montana - Land Use License Application Author Montana Department of Natural...

  20. RAPID/Solar/Land Access/Nevada | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    RAPIDSolarLand AccessNevada < RAPID | Solar | Land Access Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk...

  1. Idaho - Idaho Dept. of Lands - Application for Easement | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Easement. Boise, Idaho. Idaho Department of Lands. Easement Application Instructions; 4p. Retrieved from "http:en.openei.orgwindex.php?titleIdaho-IdahoDept.ofLands-A...

  2. EA-1927: Paducah Gaseous Diffusion Plant Potential Land and Facilities...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Paducah Gaseous Diffusion Plant Potential Land and Facilities Transfers; McCracken County, Kentucky EA-1927: Paducah Gaseous Diffusion Plant Potential Land and Facilities ...

  3. RAPID/Geothermal/Land Use/Federal | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    RAPIDGeothermalLand UseFederal < RAPID | Geothermal | Land Use Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk...

  4. RAPID/Geothermal/Land Access/Colorado | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    RAPIDGeothermalLand AccessColorado < RAPID | Geothermal | Land Access Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About...

  5. RAPID/Geothermal/Land Access/Oregon | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    RAPIDGeothermalLand AccessOregon < RAPID | Geothermal | Land Access Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk...

  6. RAPID/Geothermal/Land Access/Alaska | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    RAPIDGeothermalLand AccessAlaska < RAPID | Geothermal | Land Access Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk...

  7. Mozambique-Biofuels, Land Access and Rural Livelihoods | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Biofuels, Land Access and Rural Livelihoods Jump to: navigation, search Name Mozambique-Biofuels, Land Access and Rural Livelihoods AgencyCompany Organization International...

  8. Tanzania-Biofuels, Land Access and Rural Livelihoods | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Tanzania-Biofuels, Land Access and Rural Livelihoods Jump to: navigation, search Name Tanzania-Biofuels, Land Access and Rural Livelihoods AgencyCompany Organization...

  9. CleanEnergyProjectsonTribalLands_Project_Descriptions_072011...

    Energy.gov [DOE] (indexed site)

    CleanEnergyProjectsonTribalLandsProjectDescriptions072011.pdf More Documents & Publications CleanEnergyProjectsonTribalLandsProjectDescriptions072011.pdf...

  10. NREL: Energy Analysis - Renewable Energy on Contaminated Lands

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Renewable Energy on Contaminated Lands Map of U.S. Map of Potential Limbo Land Sites for Consideration for Renewable Energy Technology Development. Enlarge image NREL's ...

  11. Oregon Land Management Division - Easements | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Division - Easements Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Oregon Land Management Division - Easements Author Oregon Land Management...

  12. Vermont State Lands Administration: Application Page | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    State Lands Administration: Application Page Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Vermont State Lands Administration: Application Page...

  13. Utah School and Institutional Trust Lands Administration | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    School and Institutional Trust Lands Administration Jump to: navigation, search Logo: Utah School and Institutional Trust Lands Administration Name: Utah School and Institutional...

  14. Bacteria increase arid-land soil surface temperature through...

    Office of Scientific and Technical Information (OSTI)

    Bacteria increase arid-land soil surface temperature through the production of sunscreens Prev Next Title: Bacteria increase arid-land soil surface temperature through the ...

  15. Exploratory Well At Salt Wells Area (Bureau of Land Management...

    OpenEI (Open Energy Information) [EERE & EIA]

    Bureau of Land Management, 2009) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Exploratory Well At Salt Wells Area (Bureau of Land Management,...

  16. Mays Landing, New Jersey: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Smart Grid Project Registered Energy Companies in Mays Landing, New Jersey Energy Enterprises Utility Companies in Mays Landing, New Jersey Atlantic City Electric Co References...

  17. Hawaii Department of Land and Natural Resources Office of Conservation...

    OpenEI (Open Energy Information) [EERE & EIA]

    to: navigation, search Name: Hawaii Department of Land and Natural Resources Office of Conservation and Coastal Lands From Open Energy Information Address: P.O. Box 261 Place:...

  18. Soil carbon sequestration and land use change associated with...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Soil carbon sequestration and land use change associated with biofuel production: empirical evidence Title Soil carbon sequestration and land use change associated with biofuel...

  19. Land Management Practices More Critical as Biofuels Use Grows

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Land Management Practices More Critical as Biofuels Use Grows Land Management Practices More Critical as Biofuels Use Grows Climate Simulations Run at NERSC Show Cultivation Causes ...

  20. Coordination of Federal Transmission Permitting on Federal Lands...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Planning Coordination of Federal Transmission Permitting on Federal Lands (216(h)) Coordination of Federal Transmission Permitting on Federal Lands (216(h)) On October 23, 2009, ...

  1. EA-1856: Conveyance of Land and Facilities at the Portsmouth...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    56: Conveyance of Land and Facilities at the Portsmouth Gaseous Diffusion Plant for Economic Development Purposes, Piketon, Ohio EA-1856: Conveyance of Land and Facilities at the...

  2. ORS Chapter 273 State Lands Generally | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    ORS Chapter 273 State Lands GenerallyLegal Abstract Oregon statute setting forth rules and procedures related to state land. Published NA Year Signed or Took Effect...

  3. Department of Energy Land Ice Modeling Efforts (Conference) ...

    Office of Scientific and Technical Information (OSTI)

    Energy Land Ice Modeling Efforts Citation Details In-Document Search Title: Department of Energy Land Ice Modeling Efforts Authors: Price, Stephen F. Dr 1 + Show Author...

  4. Assessment of Biomass Resources from Marginal Lands in APEC Countries...

    OpenEI (Open Energy Information) [EERE & EIA]

    Biomass Resources from Marginal Lands in APEC Countries Jump to: navigation, search Logo: Assessment of Biomass Resources from Marginal Lands in APEC Countries Name Assessment of...

  5. RAPID/Geothermal/Land Access/Montana | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Way Easement for Utilities Through State Lands. Local Land Access Process not available Policies & Regulations An Introduction to Electric Power Transmission Environmental...

  6. Title 16 USC 818 Public Lands Included in Project - Reservation...

    OpenEI (Open Energy Information) [EERE & EIA]

    Entry (1996). Retrieved from "http:en.openei.orgwindex.php?titleTitle16USC818PublicLandsIncludedinProject-ReservationofLandsFromEntry&oldid722800" ...

  7. Oregon Division of State Lands | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Lands. The agency is comprised of four divisions: Director's Office, Land Management, Wetlands and Waterways Conservation, and Finance and Administration, and the South Slough...

  8. Application of the ORIGEN Fallout Analysis Tool and the DELFIC Fallout Planning Tool to National Technical Nuclear Forensics

    SciTech Connect

    Jodoin, Vincent J; Lee, Ronald W; Peplow, Douglas E.; Lefebvre, Jordan P

    2011-01-01

    The objective of this project was to provide a robust fallout analysis and planning tool for the National Technical Nuclear Forensics interagency ground sample collection team. Their application called for a fast-running, portable mission-planning tool for use in response to emerging improvised nuclear device (IND) post-detonation situations. The project met those goals by research and development of models to predict the physical, chemical, and radiological properties of fallout debris. ORNL has developed new graphical user interfaces for two existing codes, the Oak Ridge Isotope Generation (ORIGEN) code and the Defense Land Fallout Interpretive Code (DELFIC). ORIGEN is a validated, radionuclide production and decay code that has been implemented into the Fallout Analysis Tool to predict the fallout source term nuclide inventory after the detonation of an IND. DELFIC is a validated, physics-based, research reference fallout prediction software package. It has been implemented into the Fallout Planning Tool and is used to predict the fractionated isotope concentrations in fallout, particle sizes, fractionation ratios, dose rate, and integrated dose over the planned collection routes - information vital to ensure quality samples for nuclear forensic analysis while predicting dose to the sample collectors. DELFIC contains a particle activity module, which models the radiochemical fractionation of the elements in a cooling fireball as they condense into and onto particles to predict the fractionated activity size distribution for a given scenario. This provides the most detailed physics-based characterization of the fallout source term phenomenology available in an operational fallout model.

  9. Land Use License | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Land Use LicenseLegal Published NA Year Signed or Took Effect 2013 Legal Citation Not...

  10. pv land use | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    pv land use Home Rosborne318's picture Submitted by Rosborne318(5) Member 2 December, 2013 - 11:06 Request for Information Renewable Energy GenerationProduction Shreveport Airport...

  11. solar land use | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    solar land use Home Rosborne318's picture Submitted by Rosborne318(5) Member 2 December, 2013 - 11:06 Request for Information Renewable Energy GenerationProduction Shreveport...

  12. Renewable Energy Development on Tribal Lands Conference

    Energy.gov [DOE]

    The Electric Utility Consultants, Inc. (EUCI) is hosting a conference to examine key considerations when designing tribal projects to improve feasibility, assess risks and opportunities of active vs. passive tribal participation, and building a project on tribal lands.

  13. AG Land 1 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    LLC Developer AG Land Energy LLC Energy Purchaser Alliant Energy Location Story County IA Coordinates 42.145531, -93.432161 Show Map Loading map... "minzoom":false,"mappings...

  14. AG Land 4 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    LLC Developer AG Land Energy LLC Energy Purchaser Alliant Energy Location Story County IA Coordinates 42.206397, -93.325714 Show Map Loading map... "minzoom":false,"mappings...

  15. AG Land 2 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    LLC Developer AG Land Energy LLC Energy Purchaser Alliant Energy Location Story County IA Coordinates 41.904231, -93.354864 Show Map Loading map... "minzoom":false,"mappings...

  16. AG Land 3 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    LLC Developer AG Land Energy LLC Energy Purchaser Alliant Energy Location Story County IA Coordinates 42.146061, -93.428028 Show Map Loading map... "minzoom":false,"mappings...

  17. 2015 Tribal Lands and Environment Forum

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Institute for Tribal Environmental Professionals (ITEP) are hosting the annual Tribal Lands and Environment Forum. The four-day forum will feature special trainings, field trips, and breakout sessions focused on tribal water programs.

  18. 2015 Tribal Lands and Environment Forum

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Institute for Tribal Environmental Professionals (ITEP) are hosting the annual Tribal Lands and Environment Forum. The four-day forum will feature special trainings, field trips, and breakout...

  19. Marine and Land Active-Source Seismic

    Office of Scientific and Technical Information (OSTI)

    Marine and Land Active-Source Seismic Imaging of mid-Miocene to Holocene-aged Faulting near Geothermal Prospects at Pyramid Lake, Nevada Amy Eisses1-3, Annie Kell1'3, Graham ...

  20. Land O Lakes Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    O Lakes Inc Jump to: navigation, search Name: Land O'Lakes Inc Place: Saint Paul, Minnesota Zip: 55164-0101 Product: Farmer-owned cooperative, marketer of dairy-based products for...

  1. Modeling the impact of agricultural land use and management on US carbon budgets

    DOE PAGES [OSTI]

    Drewniak, B. A.; Mishra, U.; Song, J.; Prell, J.; Kotamarthi, V. R.

    2014-09-22

    Cultivation of the terrestrial land surface can create either a source or sink of atmospheric CO2, depending on land management practices. The Community Land Model (CLM) provides a useful tool to explore how land use and management impact the soil carbon pool at regional to global scales. CLM was recently updated to include representation of managed lands growing maize, soybean, and spring wheat. In this study, CLM-Crop is used to investigate the impacts of various management practices, including fertilizer use and differential rates of crop residue removal, on the soil organic carbon (SOC) storage of croplands in the continental Unitedmore » States over approximately a 170 year period. Results indicate that total US SOC stocks have already lost over 8 Pg C (10%) due to land cultivation practices (e.g., fertilizer application, cultivar choice, and residue removal), compared to a land surface composed of native vegetation (i.e., grasslands). After long periods of cultivation, individual plots growing maize and soybean lost up to 65% of the carbon stored, compared to a grassland site. Crop residue management showed the greatest effect on soil carbon storage, with low and medium residue returns resulting in additional losses of 5% and 3.5%, respectively, in US carbon storage, while plots with high residue returns stored 2% more carbon. Nitrogenous fertilizer can alter the amount of soil carbon stocks significantly. Under current levels of crop residue return, not applying fertilizer resulted in a 5% loss of soil carbon. Our simulations indicate that disturbance through cultivation will always result in a loss of soil carbon, and management practices will have a large influence on the magnitude of SOC loss.« less

  2. Modeling the impact of agricultural land use and management on US carbon budgets

    DOE PAGES [OSTI]

    Drewniak, B. A.; Mishra, U.; Song, J.; Prell, J.; Kotamarthi, V. R.

    2015-04-09

    Cultivation of the terrestrial land surface can create either a source or sink of atmospheric CO2, depending on land management practices. The Community Land Model (CLM) provides a useful tool for exploring how land use and management impact the soil carbon pool at regional to global scales. CLM was recently updated to include representation of managed lands growing maize, soybean, and spring wheat. In this study, CLM-Crop is used to investigate the impacts of various management practices, including fertilizer use and differential rates of crop residue removal, on the soil organic carbon (SOC) storage of croplands in the continental Unitedmore » States over approximately a 170-year period. Results indicate that total US SOC stocks have already lost over 8 Pg C (10%) due to land cultivation practices (e.g., fertilizer application, cultivar choice, and residue removal), compared to a land surface composed of native vegetation (i.e., grasslands). After long periods of cultivation, individual subgrids (the equivalent of a field plot) growing maize and soybean lost up to 65% of the carbon stored compared to a grassland site. Crop residue management showed the greatest effect on soil carbon storage, with low and medium residue returns resulting in additional losses of 5 and 3.5%, respectively, in US carbon storage, while plots with high residue returns stored 2% more carbon. Nitrogenous fertilizer can alter the amount of soil carbon stocks significantly. Under current levels of crop residue return, not applying fertilizer resulted in a 5% loss of soil carbon. Our simulations indicate that disturbance through cultivation will always result in a loss of soil carbon, and management practices will have a large influence on the magnitude of SOC loss.« less

  3. CS2SAT Desktop Tool

    Energy Science and Technology Software Center

    2006-03-15

    The Idaho National Laboratory (INL) has developed a Control System Cyber Security Self-Assessment Tool (CS2SAT) desktop tool that provides a repeatable and systematic approach for control system users to assess the cyber security posture of their control system networks. The tool assists users in identifying the cyber security parameters of their systems and then offers security objectives, in the form of requirements, for improving the security of their specific network. Each requirement is linked tomore » a series of associated recommendations for compliance dependent upon the desired level of security protection. Each requirement is supported by links to the original standards document and recommendations are supported by links to whitepapers and other help documents. Package also includes two back-end supporting codes: CS2SAT Requirements Matrix and Control System Security Information System.« less

  4. Foundational Tools for Petascale Computing

    SciTech Connect

    Miller, Barton

    2014-05-19

    The Paradyn project has a history of developing algorithms, techniques, and software that push the cutting edge of tool technology for high-end computing systems. Under this funding, we are working on a three-year agenda to make substantial new advances in support of new and emerging Petascale systems. The overall goal for this work is to address the steady increase in complexity of these petascale systems. Our work covers two key areas: (1) The analysis, instrumentation and control of binary programs. Work in this area falls under the general framework of the Dyninst API tool kits. (2) Infrastructure for building tools and applications at extreme scale. Work in this area falls under the general framework of the MRNet scalability framework. Note that work done under this funding is closely related to work done under a contemporaneous grant, “High-Performance Energy Applications and Systems”, SC0004061/FG02-10ER25972, UW PRJ36WV.

  5. Combination drilling and skiving tool

    DOEpatents

    Stone, William J.

    1989-01-01

    A combination drilling and skiving tool including a longitudinally extending hollow skiving sleeve slidably and concentrically mounted on a right-handed twist drill. Dogs or pawls provided on the internal periphery of the skiving sleeve engage with the helical grooves of the drill. During a clockwise rotation of the tool, the drill moves downwardly and the sleeve translates upwardly, so that the drill performs a drilling operation on a workpiece. On the other hand, the drill moves upwardly and the sleeve translates downwardly, when the tool is rotated in a counter-clockwise direction, and the sleeve performs a skiving operation. The drilling and skiving operations are separate, independent and exclusive of each other.

  6. Training Needs Assessment (TNA) Data Collection Tool

    Energy.gov [DOE]

    The TNA Data Collection Tool Instructions provides guidance on how to complete the TNA Data Collection Tool. The TNA Data Collection Tool is an Excel spreadsheet that the organization's designating training POC will use to populate their organizations training needs.

  7. Risk Management Tool Attributes: | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Risk Management Tool Attributes: Risk Management Tool Attributes: Risk Management Tool Attributes: (140.27 KB) More Documents & Publications Heating Ventilation and Air Conditioning Efficiency Idaho Operations AMWTP Fact Sheet Greenpower Trap Mufflerl System

  8. Tools for measuring surface cleanliness

    DOEpatents

    Schroder, Mark Stewart; Woodmansee, Donald Ernest; Beadie, Douglas Frank

    2002-01-01

    A procedure and tools for quantifying surface cleanliness are described. Cleanliness of a target surface is quantified by wiping a prescribed area of the surface with a flexible, bright white cloth swatch, preferably mounted on a special tool. The cloth picks up a substantial amount of any particulate surface contamination. The amount of contamination is determined by measuring the reflectivity loss of the cloth before and after wiping on the contaminated system and comparing that loss to a previous calibration with similar contamination. In the alternative, a visual comparison of the contaminated cloth to a contamination key provides an indication of the surface cleanliness.

  9. Pumping System Assessment Tool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Pumping System Assessment Tool Pumping System Assessment Tool April 10, 2014 - 3:42pm Addthis Pumping System Assessment Tool The Pumping System Assessment Tool (PSAT) is a free online software tool to help industrial users assess the efficiency of pumping system operations. PSAT uses achievable pump performance data from Hydraulic Institute standards and motor performance data from the MotorMaster+ database to calculate potential energy and associated cost savings. The tool also enables users to

  10. Sandia Energy - Solar Glare Hazard Analysis Tool

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Solar Glare Hazard Analysis Tool Home Stationary Power Energy Conversion Efficiency Solar Energy Photovoltaics Solar Market Transformation Solar Glare Hazard Analysis Tool Solar...

  11. Graphical Contingency Analysis Tool - Energy Innovation Portal

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The Graphical Contingency Analysis (GCA) Tool is a visual analytic software tool that aids power grid operators and planners to effectively manage complex outage predictions and ...

  12. WINDExchange: Agricultural and Rural Resources and Tools

    WindExchange

    Rural Communities Printable Version Bookmark and Share Wind for Homeowners, Farmers, & Businesses Resources & Tools Agricultural and Rural Resources and Tools This page lists...

  13. Qualified Specialists in Industrial Assessment Tools | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Qualified Specialists in Industrial Assessment Tools Qualified Specialists in Industrial Assessment Tools Locate a DOE-trained Qualified Specialist in your area to identify ways to...

  14. DOD - Preliminary Screening Tool | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Screening Tool Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: DOD - Preliminary Screening Tool Abstract This webpage contains the DOD...

  15. Innovative Computational Tools for Reducing Exploration Risk...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Computational Tools for Reducing Exploration Risk Through Integration of Water-Rock Interactions and Magnetotelluric Surveys Innovative Computational Tools for Reducing Exploration ...

  16. Marketing & Driving Demand: Social Media Tools & Strategies ...

    Energy Saver

    Marketing & Driving Demand: Social Media Tools & Strategies - January 16, 2011 (Text Version) Marketing & Driving Demand: Social Media Tools & Strategies - January 16, 2011 (Text ...

  17. Using High Performance Libraries and Tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    High Performance Libraries and Tools Using High Performance Libraries and Tools Memkind Library on Edison The memkind library is a user extensible heap manager built on top of ...

  18. Open-source extreme conditions modeling tools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Open-source extreme conditions modeling tools - Sandia Energy Energy Search Icon Sandia ... Multimedia & Software Videos Images Models & Tools Partnerships Tribal Energy Program ...

  19. Acknowledgement > Authorship Tools > Research > The Energy Materials...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Authorship Tools In This Section Acknowledgement Highlights Template Author Tools - Acknowledgements For a paper or presentation to be counted as a "BES-EFRC funded" activity, it ...

  20. Crucial Habitat Assessment Tool | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    library Web Site: Crucial Habitat Assessment Tool Abstract The Western Association of Fish and Wildlife Agencies Crucial Habitat Assessment Tool (CHAT) was developed to bring...

  1. Three Sustainability Tools are Enhancing Environmental Benefits...

    Energy.gov [DOE] (indexed site)

    model are three tools that are enabling an environmentally beneficial biofuels industry. ... model are three tools that are enabling an environmentally beneficial biofuels industry. ...

  2. Tools for Designing & Implementing Better Finance Programs |...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Tools for Designing & Implementing Better Finance Programs Tools for Designing & Implementing Better Finance Programs Clean energy finance programs PDF icon Presentation Microsoft ...

  3. VCAT: Visual Crosswalk Analysis Tool

    SciTech Connect

    Cleland, Timothy J.; Forslund, David W.; Cleland, Catherine A.

    2012-08-31

    VCAT is a knowledge modeling and analysis tool. It was synthesized from ideas in functional analysis, business process modeling, and complex network science. VCAT discovers synergies by analyzing natural language descriptions. Specifically, it creates visual analytic perspectives that capture intended organization structures, then overlays the serendipitous relationships that point to potential synergies within an organization or across multiple organizations.

  4. Using MCDA and GIS for hazardous waste landfill siting considering land scarcity for waste disposal

    SciTech Connect

    Feo, Giovanni De; Gisi, Sabino De

    2014-11-15

    Highlights: • Wasting land for the siting of hazardous waste landfills must be avoided. • The siting procedure is based on a land use map of potentially suitable areas. • All the waste facilities of the management system are simultaneously considered. • A case study is developed considering two multi-criteria techniques. • An innovative criteria weighting tool (PSW) is used in combination with the AHP. - Abstract: The main aim of this study was to develop a procedure that minimizes the wasting of space for the siting of hazardous waste landfills as part of a solid waste management system. We wanted to tackle the shortage of land for waste disposal that is a serious and growing problem in most large urban regions. The procedure combines a multi-criteria decision analysis (MCDA) approach with a geographical information system (GIS). The GIS was utilised to obtain an initial screening in order to eliminate unsuitable areas, whereas the MCDA was developed to select the most suitable sites. The novelty of the proposed siting procedure is the introduction of a new screening phase before the macro-siting step aimed at producing a “land use map of potentially suitable areas” for the siting of solid waste facilities which simultaneously takes into consideration all plant types. The issue of obtaining sites evaluations of a specific facility was coupled with the issue of not wasting land appropriate to facilitate other types of waste management options. In the developed case study, the use of an innovative criteria weighting tool (the “Priority Scale”) in combination with the Analytic Hierarchy Process was useful to easier define the priorities of the evaluation criteria in comparison with other classic methods such as the Paired Comparison Technique in combination with the Simple Additive Weighting method.

  5. Land Record System PIA, Bonneville Power Administration | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Land Record System PIA, Bonneville Power Administration Land Record System PIA, Bonneville Power Administration Land Record System PIA, Bonneville Power Administration Land Record System PIA, Bonneville Power Administration (61.28 KB) More Documents & Publications PIA - Bonneville Power Adminstration Ethics Helpline Integrated Safety Management Workshop Registration, PIA, Idaho National Laboratory Occupational Medicine - Assistant PIA, Idaho National Laboratory

  6. The Agricultural Policy/Environmental Extender (Apex) Model: An Emerging Tool for Landscape and Watershed Environmental Analyses

    SciTech Connect

    Gassman, Philip W.; Williams, Jimmy R.; Wang, Xiuying; Saleh, Ali; Osei, Edward; Hauck, Larry; Izaurralde, Roberto C.; Flowers, Joan

    2010-06-01

    The Agricultural Policy Environmental eXtender (APEX) model was developed by the Blacklands Research and Extension Center in Temple, Texas. APEX is a flexible and dynamic tool that is capable of simulating a wide array of management practices, cropping systems, and other land uses across a broad range of agricultural landscapes, including whole farms and small watersheds.

  7. Reinventing the Bureau of Land Management

    SciTech Connect

    Yager, J.O.; Muller, K.

    1995-12-01

    The Bureau of Land Management (BLM) has developed a {open_quotes}Blueprint for the Future{close_quotes} changing its organizational structure to better manage nearly 270 million acres of public lands and 540 million acres of subsurface mineral resources. Both efforts focus on ecosystem management and better business practices. The mission identified in the {open_quotes}Blueprint{close_quotes} is {open_quotes}to sustain the health, diversity and productivity of the public lands for the use and enjoyment of present and future generations.{close_quotes} Within this mission goals include maintaining healthy ecosystems and improving customer service and business practices. In conjunction with the Blueprint, the BLM developed strategies to streamline its headquarters and field organizational structures and to accommodate an ecosystem management approach. The new headquarters structure uses flexible interdisciplinary work teams in place of the programmatic hierarchical approach. These teams may be established on either a permanent or temporary basis. For example, one team is responsible for reporting on the condition of the public lands as an essential part of maintaining healthy ecosystems. Although it is too early to judge the success of the BLM`s reinvention efforts, insights can be gained from a review of these efforts. One insight is that most people are so used to thinking about the public lands on a statute by statute, resource by resource, project by project basis, that is difficult for them to adjust to the ecosystem management or streamlining paradigms.

  8. Proceedings: Special session on the rehabilitation of US Army Training Lands, Second Annual Conference of the Society for Ecological Restoration, held in Chicago, Illinois, April 29--May 3, 1990

    SciTech Connect

    Hinchman, R.R.

    1993-05-01

    US Army lands are currently being degraded at a rate that often exceeds natural resource conservation goals. The US Army Construction Engineering Research Laboratories is developing and implementing the Integrated Training Area Management (ITAM) program at several installations in the United States and Germany to reverse the rate of degradation and maintain realistic training habitat. The ITAM program includes environmental education/awareness tools, revegetation and erosion-control technologies, standardized land-monitoring methodologies, and computerized land-management decision-support systems that are integrated with military training mission requirements to provide a long-term, land-management program.

  9. Land management practices to become important as biofuels use grows |

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Land Record System PIA, Bonneville Power Administration Land Record System PIA, Bonneville Power Administration Land Record System PIA, Bonneville Power Administration Land Record System PIA, Bonneville Power Administration (61.28 KB) More Documents & Publications PIA - Bonneville Power Adminstration Ethics Helpline Integrated Safety Management Workshop Registration, PIA, Idaho National Laboratory Occupational Medicine - Assistant PIA, Idaho National Laboratory

    Land and Asset

  10. ARM - Ingest Supporting Tools and Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Forms Ingest Ingest Workflow Graphic Supporting Workflow Documentation Supporting Tools and Forms Process Configuration Manager (PCM) Metadata Management Tool (MMT) ARM Data Integrator (ADI) Ingest Readiness Form Associated Status Reports Contacts Engineering Processes Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field Campaign Startup Ingest Supporting Tools and Forms

  11. A taxonomy of automatic differentiation tools

    SciTech Connect

    Juedes, D.W. . Dept. of Computer Science)

    1991-01-01

    Many of the current automatic differentiation (AD) tools have similar characteristics. Unfortunately, the similarities between these various AD tools often cannot be easily ascertained by reading the corresponding documentation. To clarify this situation, a taxonomy of AD tools is presented. The taxonomy places AD tools into the Elemental, Extensional, Integral, Operational, and Symbolic classes. This taxonomy is used to classify twenty-nine AD tools. Each tool is examined individually with respect to the mode of differentiation used and the degree of derivatives computed. A list detailing the availability of the surveyed AD tools is provided in the Appendix. 54 refs., 3 figs., 1 tab.

  12. Results from KamLAND-Zen

    DOE PAGES [OSTI]

    Asakura, K.; Gando, A.; Gando, Y.; Hachiya, T.; Hayashida, S.; Ikeda, H.; Inoue, K.; Ishidoshiro, K.; Ishikawa, T.; Ishio, S.; et al

    2015-07-15

    KamLAND-Zen reports on a preliminary search for neutrinoless double-beta decay with 136Xe based on 114.8 live-days after the purification of the xenon loaded liquid scintillator. In this data, the problematic 110mAg background peak identified in previous searches is reduced by more than a factor of 10. By combining the KamLAND-Zen pre- and post-purification data, we obtain a preliminary lower limit on the 0νββ decay half-life of T0ν1/2 > 2.6×1025 yr at 90% C.L. The search sensitivity will be enhanced with additional low background data after the purification. As a result, prospects for further improvements with future KamLAND-Zen upgrades are alsomore » presented.« less

  13. Results from KamLAND-Zen

    SciTech Connect

    Asakura, K.; Gando, A.; Gando, Y.; Hachiya, T.; Hayashida, S.; Ikeda, H.; Inoue, K.; Ishidoshiro, K.; Ishikawa, T.; Ishio, S.; Koga, M.; Matsuda, R.; Matsuda, S.; Mitsui, T.; Motoki, D.; Nakamura, K.; Obara, S.; Oki, Y.; Otani, M.; Oura, T.; Shimizu, I.; Shirahata, Y.; Shirai, J.; Suzuki, A.; Tachibana, H.; Tamae, K.; Ueshima, K.; Watanabe, H.; Xu, B. D.; Yamauchi, Y.; Yoshida, H.; Kozlov, A.; Takemoto, Y.; Yoshido, S.; Fushimi, K.; Banks, T. I.; Freedman, S. J.; Fujikawa, B. K.; O'Donnell, T.; Winslow, L. A.; Berger, B. E.; Efremenko, Y.; Karwowski, H. J.; Markoff, D. M.; Tornow, W.; Detwiler, J. A.; Enomoto, S.; Decowski, M. P.

    2015-07-15

    KamLAND-Zen reports on a preliminary search for neutrinoless double-beta decay with 136Xe based on 114.8 live-days after the purification of the xenon loaded liquid scintillator. In this data, the problematic 110mAg background peak identified in previous searches is reduced by more than a factor of 10. By combining the KamLAND-Zen pre- and post-purification data, we obtain a preliminary lower limit on the 0??? decay half-life of T0?1/2 > 2.61025 yr at 90% C.L. The search sensitivity will be enhanced with additional low background data after the purification. As a result, prospects for further improvements with future KamLAND-Zen upgrades are also presented.

  14. Stable water isotope simulation by current land-surface schemes:Results of IPILPS phase 1

    SciTech Connect

    Henderson-Sellers, A.; Fischer, M.; Aleinov, I.; McGuffie, K.; Riley, W.J.; Schmidt, G.A.; Sturm, K.; Yoshimura, K.; Irannejad, P.

    2005-10-31

    Phase 1 of isotopes in the Project for Intercomparison of Land-surface Parameterization Schemes (iPILPS) compares the simulation of two stable water isotopologues ({sup 1}H{sub 2} {sup 18}O and {sup 1}H{sup 2}H{sup 16}O) at the land-atmosphere interface. The simulations are off-line, with forcing from an isotopically enabled regional model for three locations selected to offer contrasting climates and ecotypes: an evergreen tropical forest, a sclerophyll eucalypt forest and a mixed deciduous wood. Here we report on the experimental framework, the quality control undertaken on the simulation results and the method of intercomparisons employed. The small number of available isotopically-enabled land-surface schemes (ILSSs) limits the drawing of strong conclusions but, despite this, there is shown to be benefit in undertaking this type of isotopic intercomparison. Although validation of isotopic simulations at the land surface must await more, and much more complete, observational campaigns, we find that the empirically-based Craig-Gordon parameterization (of isotopic fractionation during evaporation) gives adequately realistic isotopic simulations when incorporated in a wide range of land-surface codes. By introducing two new tools for understanding isotopic variability from the land surface, the Isotope Transfer Function and the iPILPS plot, we show that different hydrological parameterizations cause very different isotopic responses. We show that ILSS-simulated isotopic equilibrium is independent of the total water and energy budget (with respect to both equilibration time and state), but interestingly the partitioning of available energy and water is a function of the models' complexity.

  15. Component Modeling Approach Software Tool

    SciTech Connect

    2010-08-23

    The Component Modeling Approach Software Tool (CMAST) establishes a set of performance libraries of approved components (frames, glass, and spacer) which can be accessed for configuring fenestration products for a project, and btaining a U-factor, Solar Heat Gain Coefficient (SHGC), and Visible Transmittance (VT) rating for those products, which can then be reflected in a CMA Label Certificate for code compliance. CMAST is web-based as well as client-based. The completed CMA program and software tool will be useful in several ways for a vast array of stakeholders in the industry: Generating performance ratings for bidding projects Ascertaining credible and accurate performance data Obtaining third party certification of overall product performance for code compliance

  16. Hydraulically actuated well shifting tool

    SciTech Connect

    Roth, B.A.

    1992-10-20

    This patent describes a hydraulically actuated shifting tool for actuating a sliding member in a well tool. It comprises: a housing having a hydraulic fluid bore therein; shifting dog means positioned on the housing for movement away and toward the housing; locking dog means positioned on the housing for movement away and toward the body; shifting dog hydraulic actuating means in fluid communication with the bore for causing engagement of the shifting dogs with the sliding member; locking dog hydraulic actuating means in communication with the bore for causing engagement of the locking dogs with the locking means; and hydraulic shifting means in communication with the bore for causing relative movement between the shifting dog means and the locking dog means for shifting the sliding sleeve.

  17. Distributed Wind Policy Comparison Tool

    Energy.gov [DOE]

    DOE funded "Best Practices for Cost-Effective Distributed Wind" to identify distributed wind technology policy best practices and to help policymakers, utilities, advocates, and consumers examine their effectiveness using a pro forma model. Incorporating a customized feed from the Database of State Incentives for Renewables and Efficiency (DSIRE), the Web-based Distributed Wind Policy Comparison Tool is designed to assist state, local, and utility officials in understanding the financial impacts of different policy options to help reduce the cost of distributed wind technologies. The Tool can be used to evaluate the ways that a variety of federal and state policies and incentives impact the economics of distributed wind (and subsequently its expected market growth).

  18. A framework for benchmarking land models

    SciTech Connect

    Luo, Yiqi; Randerson, J.; Abramowitz, G.; Bacour, C.; Blyth, E.; Carvalhais, N.; Ciais, Philippe; Dalmonech, D.; Fisher, J.B.; Fisher, R.; Friedlingstein, P.; Hibbard, Kathleen A.; Hoffman, F. M.; Huntzinger, Deborah; Jones, C.; Koven, C.; Lawrence, David M.; Li, D.J.; Mahecha, M.; Niu, S.L.; Norby, Richard J.; Piao, S.L.; Qi, X.; Peylin, P.; Prentice, I.C.; Riley, William; Reichstein, M.; Schwalm, C.; Wang, Y.; Xia, J. Y.; Zaehle, S.; Zhou, X. H.

    2012-10-09

    Land models, which have been developed by the modeling community in the past few decades to predict future states of ecosystems and climate, have to be critically evaluated for their performance skills of simulating ecosystem responses and feedback to climate change. Benchmarking is an emerging procedure to measure performance of models against a set of defined standards. This paper proposes a benchmarking framework for evaluation of land model performances and, meanwhile, highlights major challenges at this infant stage of benchmark analysis. The framework includes (1) targeted aspects of model performance to be evaluated, (2) a set of benchmarks as defined references to test model performance, (3) metrics to measure and compare performance skills among models so as to identify model strengths and deficiencies, and (4) model improvement. Land models are required to simulate exchange of water, energy, carbon and sometimes other trace gases between the atmosphere and land surface, and should be evaluated for their simulations of biophysical processes, biogeochemical cycles, and vegetation dynamics in response to climate change across broad temporal and spatial scales. Thus, one major challenge is to select and define a limited number of benchmarks to effectively evaluate land model performance. The second challenge is to develop metrics of measuring mismatches between models and benchmarks. The metrics may include (1) a priori thresholds of acceptable model performance and (2) a scoring system to combine datamodel mismatches for various processes at different temporal and spatial scales. The benchmark analyses should identify clues of weak model performance to guide future development, thus enabling improved predictions of future states of ecosystems and climate. The near-future research effort should be on development of a set of widely acceptable benchmarks that can be used to objectively, effectively, and reliably evaluate fundamental properties of land models

  19. A framework for benchmarking land models

    SciTech Connect

    Luo, Yiqi; Randerson, James T.; Hoffman, Forrest; Norby, Richard J

    2012-01-01

    Land models, which have been developed by the modeling community in the past few decades to predict future states of ecosystems and climate, have to be critically evaluated for their performance skills of simulating ecosystem responses and feedback to climate change. Benchmarking is an emerging procedure to measure performance of models against a set of defined standards. This paper proposes a benchmarking framework for evaluation of land model performances and, meanwhile, highlights major challenges at this infant stage of benchmark analysis. The framework includes (1) targeted aspects of model performance to be evaluated, (2) a set of benchmarks as defined references to test model performance, (3) metrics to measure and compare performance skills among models so as to identify model strengths and deficiencies, and (4) model improvement. Land models are required to simulate exchange of water, energy, carbon and sometimes other trace gases between the atmosphere and land surface, and should be evaluated for their simulations of biophysical processes, biogeochemical cycles, and vegetation dynamics in response to climate change across broad temporal and spatial scales. Thus, one major challenge is to select and define a limited number of benchmarks to effectively evaluate land model performance. The second challenge is to develop metrics of measuring mismatches between models and benchmarks. The metrics may include (1) a priori thresholds of acceptable model performance and (2) a scoring system to combine data model mismatches for various processes at different temporal and spatial scales. The benchmark analyses should identify clues of weak model performance to guide future development, thus enabling improved predictions of future states of ecosystems and climate. The near-future research effort should be on development of a set of widely acceptable benchmarks that can be used to objectively, effectively, and reliably evaluate fundamental properties of land models

  20. Coastal land loss in Texas - An overview

    SciTech Connect

    Morton, R.A.; Paine, J.G. )

    1990-09-01

    Each year in Texas more than 1,500 acres of prime real estate and productive wetlands are destroyed along the Gulf shoreline and near the bay margins primarily as a result of coastal erosion and submergence. Wetland losses constitute about half of the total land losses. Historical analyses of maps and aerial photographs since the mid-1800s indicate that land losses are accelerating and that human activities are either directly or indirectly responsible for the increased losses, Natural decreases in sediment supply since the modern sea-level stillstand have been exacerbated by (1) river basin projects that reduce the volume of sediment transported to the coast and (2) coastal structures and navigation projects that prevent redistribution of littoral sediments along the coast. Erosion is primarily caused by high wave and current energy combined with an inadequate supply of sediment. Erosion is responsible for higher local rates of land loss than submergence, and the erosion losses are more perceptible, especially after major storms when the greatest losses occur. The principal components of submergence are subsidence and the eustatic rise in sea level. Together these components are recorded by tide gauges as a relative rise in sea level. Submergence converts uplands to wetlands and wetlands to open water. These surficial changes occur mostly on the coastal plain but are also observed on barrier islands and bayhead deltas and within entrenched valleys. Although compactional subsidence is a natural process operating in the Gulf Coast basin, most of the accelerated land-surface subsidence in Texas is attributed to extraction of shallow ground water or production of hydrocarbons at moderate depths. Faults activated by the withdrawal of these fluids concentrate the subsidence near the fault planes. Coastal land losses caused by dredging are less than those caused by erosion and submergence, but they constitute a growing percentage of total land losses.