National Library of Energy BETA

Sample records for tip top bir

  1. Programs and Contractors -Top Tips for Successful Relationships...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Programs and Contractors -Top Tips for Successful Relationships (101) Programs and Contractors -Top Tips for Successful Relationships (101) Better Buildings Residential Network ...

  2. Programs and Contractors - Top Tips for Successful Relationships...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Programs and Contractors - Top Tips for Successful Relationships (101) Programs and Contractors - Top Tips for Successful Relationships (101) October 22, 2015 1:00PM to 2:30PM...

  3. Social Media and Messages That Matter: Top Tips and Tools Peer...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Social Media and Messages That Matter: Top Tips and Tools Peer Exchange Call Social Media and Messages That Matter: Top Tips and Tools Peer Exchange Call July 9...

  4. What Are Your Top Tips for Saving Energy? | Department of Energy

    Energy.gov [DOE] (indexed site)

    What Are Your Top Tips for Saving Energy? Earlier this week, John Chu shared with us his Top 10 Tips to Save Energy and Money This Summer. But since most of the country is in the ...

  5. Programs and Contractors –Top Tips for Successful Relationships! (101)

    Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Programs and Contractors - Top Tips for Successful Relationships! (101), October 22, 2015

  6. Top 10 Tips for Contracting with the DOE | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Services » Small Business Program » Top 10 Tips for Contracting with the DOE Top 10 Tips for Contracting with the DOE Top 10 Tips for Contracting with the DOE lists recommendations for small businesses looking into federal contracting with the DOE, along with additional resources and trainings. Top 10 Tips for Contracting with the DOE (360.72 KB) More Documents & Publications Government Contracting Fundamentals Downloads: August 6-8, 2013 National Veterans Small Business Conference U.S.

  7. Social Media and Messages that Matter - Top Tips and Tools | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Social Media and Messages that Matter - Top Tips and Tools Social Media and Messages that Matter - Top Tips and Tools Better Buildings Residential Network Peer Exchange Call Series: Social Media and Messages that Matter - Top Tips and Tools, call slides and discussion summary. Call Slides and Discussion Summary (4.43 MB) More Documents & Publications The Dog Days of Summer - Capitalizing on the Pet Market Hit the Road: Applying Lessons from National Campaigns to a Local Context

  8. Top 5 Tips from Clean Energy Moms for Mother's Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    5 Tips from Clean Energy Moms for Mother's Day Top 5 Tips from Clean Energy Moms for Mother's Day May 6, 2016 - 2:34pm Addthis Top 5 Tips from Clean Energy Moms for Mother’s Day Forget to get mom a Mother's Day gift? It's not too late. Surprise her by actually following the house rules! We polled 20 moms across the Office of Energy Efficiency and Renewable Energy (EERE) and asked for tips they're using at home to help raise the next generation of clean energy advocates (i.e. you). It's

  9. Top 10 Tips to Save Energy and Money in the Winter | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Tips to Save Energy and Money in the Winter Top 10 Tips to Save Energy and Money in the Winter December 10, 2012 - 12:43pm Q&A What are some other ways that you save energy and money in the winter? Tell Us Addthis Using a programmable thermostat is one way to save energy in your home this winter. | Photo courtesy of iStockphoto.com/BanksPhotos. Using a programmable thermostat is one way to save energy in your home this winter. | Photo courtesy of iStockphoto.com/BanksPhotos. John Chu John

  10. Top 10 Tips to Save Energy and Money This Summer | Department of Energy

    Energy Saver

    Most Popular Energy Savers Web Pages of 2011 Top 10 Most Popular Energy Savers Web Pages of 2011 December 27, 2011 - 9:08am Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory 2011 proved to be another successful year for consumers wanting to save money and energy at home. The Energy Savers website continues to be a great resource for readers interested in learning more about energy efficiency and tips for saving money and energy at home and on the road-and

  11. Top 9 tips on how to prevent cyber "break-ins" | Argonne National

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tools_for_Improving_Industry_Communications.pdf Tools_for_Improving_Industry_Communications.pdf (1.67 MB) More Documents & Publications DOE Vendor Communications Plan DOE Vendor Communication Plan Review of Selected Home Energy Auditing Tools

    Most Popular Energy Savers Web Pages of 2011 Top 10 Most Popular Energy Savers Web Pages of 2011 December 27, 2011 - 9:08am Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory 2011 proved to be another successful

  12. XIAP Induces NF-kB Activation via the BIR1/TAB1 Interaction and BIR1 Dimerization

    SciTech Connect

    Lu,M.; Lin, S.; Huang, Y.; Kang, Y.; Rich, R.; Lo, Y.; Myszka, D.; Han, J.; Wu, H.

    2007-01-01

    In addition to caspase inhibition, X-linked inhibitor of apoptosis (XIAP) induces NF-{kappa}B and MAP kinase activation during TGF-b and BMP receptor signaling and upon overexpression. Here we show that the BIR1 domain of XIAP, which has no previously ascribed function, directly interacts with TAB1 to induce NF-{kappa}B activation. TAB1 is an upstream adaptor for the activation of the kinase TAK1, which in turn couples to the NF-{kappa}B pathway. We report the crystal structures of BIR1, TAB1, and the BIR1/TAB1 complex. The BIR1/TAB1 structure reveals a striking butterfly-shaped dimer and the detailed interaction between BIR1 and TAB1. Structure-based mutagenesis and knockdown of TAB1 show unambiguously that the BIR1/TAB1 interaction is crucial for XIAP-induced TAK1 and NF-{kappa}B activation. We show that although not interacting with BIR1, Smac, the antagonist for caspase inhibition by XIAP, also inhibits the XIAP/TAB1 interaction. Disruption of BIR1 dimerization abolishes XIAP-mediated NF-{kappa}B activation, implicating a proximity-induced mechanism for TAK1 activation.

  13. Slender tip laser scalpel

    DOEpatents

    Veligdan, James T.

    2004-01-06

    A laser scalpel includes a ribbon optical waveguide extending therethrough and terminating at a slender optical cutting tip. A laser beam is emitted along the height of the cutting tip for cutting tissue therealong.

  14. BR UFF BIG PINEY WILD ROSE BLU E GAP BR UFF UNIT WAMSUT TER

    Energy Information Administration (EIA) (indexed site)

    BIG PINEY TIP TOP BIR D CANYON SWAN FONTEN ELL E LABARGE HOGSBACK CHIMNEY BUT TE BIG PINEY AREA TIP TOP UNI T LINCOLN ROAD BLU E FOREST DEER HILL FOGART Y CREEK GREEN RIVER BEND ...

  15. Nose tip locking device

    DOEpatents

    Andersen, John A.; Harty, Gene R.

    1977-01-01

    The disclosure relates to a mechanism for releasably locking a nose tip to a vehicle utilizing a pawl and ratchet and pinion arrangement.

  16. Gas-Saving Tips

    SciTech Connect

    2015-02-12

    This fact sheet for consumers describes a few simple tips to help obtain the best possible fuel economy from vehicles and to reduce fuel costs.

  17. Post-Show Tips

    Energy.gov [DOE]

    These guidelines are designed to help you with the post-show process. This page includes tips for tearing down your exhibit, shipping the exhibit, and collecting your bills.

  18. Social Media and Messages that Matter - Top Tips and Tools

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Town of Blacksburg Umatilla Electric Cooperative University of Nebraska - Omaha Ventura County, CA Yolo County Housing 8 Call Participant Locations 9 Opening ...

  19. Social Media and Messages that Matter - Top Tips and Tools |...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Call Slides and Discussion Summary (4.43 MB) More Documents & Publications The Dog Days of Summer - Capitalizing on the Pet Market Hit the Road: Applying Lessons from National ...

  20. Top 10 Tips for Contracting with the DOE

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    GSA and SBA) DOE's annual small business conference Procurement Technical Assistance Center (PTAC) trainings, counseling, and other resources OSDBU's Business ...

  1. Magnet pole tips

    DOEpatents

    Thorn, C.E.; Chasman, C.; Baltz, A.J.

    1981-11-19

    An improved magnet more easily provides a radially increasing magnetic field, as well as reduced fringe field and requires less power for a given field intensity. The subject invention comprises a pair of spaced, opposed magnetic poles which further comprise a pair of pole roots, each having a pole tip attached to its center. The pole tips define the gap between the magnetic poles and at least a portion of each pole tip is separated from its associated pole root. The separation begins at a predetermined distance from the center of the pole root and increases with increasing radial distance while being constant with azimuth within that portion. Magnets in accordance with the subject invention have been found to be particularly advantageous for use in large isochronous cyclotrons.

  2. Magnet pole tips

    DOEpatents

    Thorn, Craig E. (Wading River, NY); Chasman, Chellis (Setauket, NY); Baltz, Anthony J. (Coram, NY)

    1984-04-24

    An improved magnet which more easily provides a radially increasing magnetic field, as well as reduced fringe field and requires less power for a given field intensity. The subject invention comprises a pair of spaced, opposed magnetic poles which further comprise a pair of pole roots, each having a pole tip attached to its center. The pole tips define the gap between the magnetic poles and at least a portion of each pole tip is separated from its associated pole root. The separation begins at a predetermined distance from the center of the pole root and increases with increasing radial distance while being constant with azimuth within that portion. Magnets in accordance with the subject invention have been found to be particularly advantageous for use in large isochronous cyclotrons.

  3. Tips: Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Tips: Lighting Tips: Lighting Lighting choices save you money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. Lighting choices save you money....

  4. File:Tip-top-tip-speed-teacher.pdf | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Excel 2010 Conversion program Microsoft Excel 2,010 Encrypted no Page size 792 x 612 pts (letter) Version of PDF format 1.5 Retrieved from "http:en.openei.orgw...

  5. File:Tip-top-tip-speed-teacher-HS.pdf | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    this file. Metadata This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from...

  6. File:Tip-top-tip-speed-student.pdf | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    this file. Metadata This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from...

  7. File:Tip-top-tip-speed-student-HS.pdf | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    this file. Metadata This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from...

  8. File:Tip-top-tip-speed-lp-HS.pdf | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    metadata was last modified 08:54, 7 August 2013 Software used Acrobat PDFMaker 9.0 for Word Conversion program Adobe PDF Library 9.0 Encrypted no Page size 612 x 792 pts (letter)...

  9. File:Tip-top-tip-speed-lp.pdf | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    metadata was last modified 08:54, 7 August 2013 Software used Acrobat PDFMaker 9.0 for Word Conversion program Adobe PDF Library 9.0 Encrypted no Page size 612 x 792 pts (letter)...

  10. Tips For Getting Hired

    Energy.gov [DOE]

    Successful candidates know it takes a little extra effort to get to the top. This one hour workshop introduces you to the Department of Energy, in addition to guiding you in creating a competitive...

  11. Gas-Saving Tips

    Alternative Fuels and Advanced Vehicles Data Center

    Gas-Saving Tips Some consumers believe fuel economy ratings are a fixed number, like engine size or cargo volume. However, a vehicle's fuel economy can vary significantly due to several factors, including how the vehicle is driven, the vehicle's mechanical condition, and the environment in which it is driven. Fortunately, you may be able to improve your vehicle's gas mileage through proper maintenance and driving habits. Studies suggest the average driver can improve his/her fuel economy by

  12. Crystal Structure of the BIR1 Domain of XIAP in Two Crystal Forms

    SciTech Connect

    Lin,S.; Huang, Y.; Lo, Y.; Lu, M.; Wu, H.

    2007-01-01

    X-linked inhibitor of apoptosis (XIAP) is a potent negative regulator of apoptosis. It also plays a role in BMP signaling, TGF-{beta} signaling, and copper homeostasis. Previous structural studies have shown that the baculoviral IAP repeat (BIR2 and BIR3) domains of XIAP interact with the IAP-binding-motifs (IBM) in several apoptosis proteins such as Smac and caspase-9 via the conserved IBM-binding groove. Here, we report the crystal structure in two crystal forms of the BIR1 domain of XIAP, which does not possess this IBM-binding groove and cannot interact with Smac or caspase-9. Instead, the BIR1 domain forms a conserved dimer through the region corresponding to the IBM-binding groove. Structural and sequence analyses suggest that this dimerization of BIR1 in XIAP may be conserved in other IAP family members such as cIAP1 and cIAP2 and may be important for the action of XIAP in TGF-{beta} and BMP signaling and the action of cIAP1 and cIAP2 in TNF receptor signaling.

  13. Gas only nozzle fuel tip

    DOEpatents

    Bechtel, William Theodore; Fitts, David Orus; DeLeonardo, Guy Wayne

    2002-01-01

    A diffusion flame nozzle gas tip is provided to convert a dual fuel nozzle to a gas only nozzle. The nozzle tip diverts compressor discharge air from the passage feeding the diffusion nozzle air swirl vanes to a region vacated by removal of the dual fuel components, so that the diverted compressor discharge air can flow to and through effusion holes in the end cap plate of the nozzle tip. In a preferred embodiment, the nozzle gas tip defines a cavity for receiving the compressor discharge air from a peripheral passage of the nozzle for flow through the effusion openings defined in the end cap plate.

  14. Top physics at CDF

    SciTech Connect

    Julia Thom

    2004-06-24

    Precision studies of top quark properties are a primary goal of the Run II physics program at the Fermilab Tevatron. Marking the first stages of this program, the CDF collaboration presents recent results on top pair production cross section, single top physics and top mass, using between 109 and 200 pb{sup -1} of Run II data.

  15. Sharpening of field emitter tips using high-energy ions

    DOEpatents

    Musket, Ronald G.

    1999-11-30

    A process for sharpening arrays of field emitter tips of field emission cathodes, such as found in field-emission, flat-panel video displays. The process uses sputtering by high-energy (more than 30 keV) ions incident along or near the longitudinal axis of the field emitter to sharpen the emitter with a taper from the tip or top of the emitter down to the shank of the emitter. The process is particularly applicable to sharpening tips of emitters having cylindrical or similar (e.g., pyramidal) symmetry. The process will sharpen tips down to radii of less than 12 nm with an included angle of about 20 degrees. Because the ions are incident along or near the longitudinal axis of each emitter, the tips of gated arrays can be sharpened by high-energy ion beams rastered over the arrays using standard ion implantation equipment. While the process is particularly applicable for sharpening of arrays of field emitters in field-emission flat-panel displays, it can be effectively utilized in the fabrication of other vacuum microelectronic devices that rely on field emission of electrons.

  16. Tips: Laundry | Department of Energy

    Office of Environmental Management (EM)

    your machine will generally do a good job of cleaning your clothes. Switching your temperature setting from hot to warm can cut a load's energy use in half. Laundry Tips Wash...

  17. Top Innovations 2012

    Energy.gov [DOE]

    On this page, you will find Building America's Top Innovations from 1995 through 2012, with links to a profile describing each innovation. Note that some categories may not have a top innovation...

  18. Top NAICS Codes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Business opportunities » Top NAICS Codes Top NAICS Codes Below is a current listing of the top NAICS codes by volume and dollar value Contact Small Business Office 505-667-4419 Email Top Ten NAICS Codes Volume 339999 All Other Miscellaneous Manufacturing 339940 Office Supplies (except Paper) Manufacturing 339113 Surgical Appliance and Supplies Manufacturing 334118 Computer Terminal and Other Computer Peripheral Equipment Manufacturing 334220 Radio and Television Broadcasting and Wireless

  19. CDF Top Physics

    DOE R&D Accomplishments

    Tartarelli, G. F.; CDF Collaboration

    1996-05-01

    The authors present the latest results about top physics obtained by the CDF experiment at the Fermilab Tevatron collider. The data sample used for these analysis (about 110 pb{sup{minus}1}) represents almost the entire statistics collected by CDF during four years (1992--95) of data taking. This large data size has allowed detailed studies of top production and decay properties. The results discussed here include the determination of the top quark mass, the measurement of the production cross section, the study of the kinematics of the top events and a look at top decays.

  20. Turbine blade with contoured chamfered squealer tip

    DOEpatents

    Lee, Ching-Pang

    2014-12-30

    A squealer tip formed from a pressure side tip wall and a suction side tip wall extending radially outward from a tip of the turbine blade is disclosed. The pressure and suction side tip walls may be positioned along the pressure sidewall and the suction sidewall of the turbine blade, respectively. The pressure side tip wall may include a chamfered leading edge with film cooling holes having exhaust outlets positioned therein. An axially extending tip wall may be formed from at least two outer linear surfaces joined together at an intersection forming a concave axially extending tip wall. The axially extending tip wall may include a convex inner surface forming a radially outer end to an inner cavity forming a cooling system. The cooling system may include one or more film cooling holes in the axially extending tip wall proximate to the suction sidewall, which promotes increased cooling at the pressure and suction sidewalls.

  1. BR UFF BIG PINEY WILD ROSE BLU E GAP BR UFF UNIT WAMSUT TER

    Annual Energy Outlook

    The boundaries are not informed by subsurface structural information. The data and methods ... BIG PINEY TIP TOP BIR D CANYON SWAN FONTEN ELL E LABARGE HOGSBACK CHIMNEY BUT TE BIG PINEY ...

  2. Top Physics at CDF

    SciTech Connect

    Moon, Chang-Seong

    2011-06-01

    We present the recent results of top-quark physics using up to 6 fb{sup -1} of p{bar p} collisions at a center of mass energy of {radical}s = 1.96 TeV analyzed by the CDF collaboration. Thanks to this large data sample, precision top quark measurements are now a reality at the Tevatron. Further, several new physics signals could appear in this large dataset. We will present the latest measurements of top quark intrinsic properties as well as direct searches for new physics in the top sector.

  3. Top Science of 2013

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Liquid-scanning technology boosts airport security science-innovationassetsimagesicon-science.jpg Top Science of 2013 Our strong interdisciplinary teaming and unique research...

  4. Scanning tip microwave near field microscope

    DOEpatents

    Xiang, Xiao-Dong; Schultz, Peter G.; Wei, Tao

    1998-01-01

    A microwave near field microscope has a novel microwave probe structure wherein the probing field of evanescent radiation is emitted from a sharpened metal tip instead of an aperture or gap. This sharpened tip, which is electrically and mechanically connected to a central electrode, extends through and beyond an aperture in an endwall of a microwave resonating device such as a microwave cavity resonator or a microwave stripline resonator. Since the field intensity at the tip increases as the tip sharpens, the total energy which is radiated from the tip and absorbed by the sample increases as the tip sharpens. The result is improved spatial resolution without sacrificing sensitivity.

  5. Scanning tip microwave near field microscope

    DOEpatents

    Xiang, X.D.; Schultz, P.G.; Wei, T.

    1998-10-13

    A microwave near field microscope has a novel microwave probe structure wherein the probing field of evanescent radiation is emitted from a sharpened metal tip instead of an aperture or gap. This sharpened tip, which is electrically and mechanically connected to a central electrode, extends through and beyond an aperture in an end wall of a microwave resonating device such as a microwave cavity resonator or a microwave stripline resonator. Since the field intensity at the tip increases as the tip sharpens, the total energy which is radiated from the tip and absorbed by the sample increases as the tip sharpens. The result is improved spatial resolution without sacrificing sensitivity. 17 figs.

  6. Turbine blade tip flow discouragers

    DOEpatents

    Bunker, Ronald Scott

    2000-01-01

    A turbine assembly comprises a plurality of rotating blade portions in a spaced relation with a stationery shroud. The rotating blade portions comprise a root section, a tip portion and an airfoil. The tip portion has a pressure side wall and a suction side wall. A number of flow discouragers are disposed on the blade tip portion. In one embodiment, the flow discouragers extend circumferentially from the pressure side wall to the suction side wall so as to be aligned generally parallel to the direction of rotation. In an alternative embodiment, the flow discouragers extend circumferentially from the pressure side wall to the suction side wall so as to be aligned at an angle in the range between about 0.degree. to about 60.degree. with respect to a reference axis aligned generally parallel to the direction of rotation. The flow discouragers increase the flow resistance and thus reduce the flow of hot gas flow leakage for a given pressure differential across the blade tip portion so as to improve overall turbine efficiency.

  7. Tips: Air Ducts | Department of Energy

    Energy Saver

    Tips: Air Ducts Tips: Air Ducts Air ducts: out of sight, out of mind. The unsealed ducts in your attic and crawlspaces lose air, and uninsulated ducts lose heat -- wasting energy ...

  8. Tips: Renewable Energy | Department of Energy

    Office of Environmental Management (EM)

    Tips: Renewable Energy Tips: Renewable Energy Use solar power to heat water and more Today's solar power is highly efficient. You can buy systems to heat your water, provide...

  9. Tips: Booklet Distribution | Department of Energy

    Office of Environmental Management (EM)

    Addthis Tips: Booklet Distribution There are many ways to obtain Energy Saver-Tips on Saving Money and Energy at Home You can access Energy Saver, as well as the...

  10. Tip Sheets by System | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Tip Sheets by System Tip Sheets by System Two-page tip sheets give engineers and equipment operators advice to quickly make improvements. Learn how to determine air-fuel ratios for burners, evaluate adjustable speed drive efficiency, inspect and repair steam traps, benchmark fuel costs, and handle other system efficiency issues. Available for: pump, steam, motor, compressed air, process heating, and plant wide systems. Pumps Tip Sheets Adjustable Speed Pumping Applications Conduct an In-Plant

  11. Tips: Booklet Distribution | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Tips: Booklet Distribution Tips: Booklet Distribution Tips: Booklet Distribution There are many ways to obtain Energy Saver-Tips on Saving Money and Energy at Home! You can access Energy Saver, as well as the Spanish-language Energy Saver, in the following ways. Order booklets in bulk quantities through the Energy Saver Partnership. Organizations can order booklet copies in bulk for distribution to your customers, members, or employees. The Energy Saver booklet and the Spanish Energy Saver

  12. Injector tip for an internal combustion engine

    DOEpatents

    Shyu, Tsu Pin; Ye, Wen

    2003-05-20

    This invention relates to a the tip structure of a fuel injector as used in a internal combustion engine. Internal combustion engines using Homogeneous Charge Compression Ignition (HCCI) technology require a tip structure that directs fuel spray in a downward direction. This requirement necessitates a tip design that is capable of withstanding mechanical stresses associated with the design.

  13. Top Science of 2013

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Department of Energy Top EM Leadership to Participate in 2016 National Cleanup Workshop Top EM Leadership to Participate in 2016 National Cleanup Workshop March 9, 2016 - 12:00pm Addthis Top EM Leadership to Participate in 2016 National Cleanup Workshop WASHINGTON, D.C. - EM's senior leaders are set to join the 2016 National Cleanup Workshop in mid-September in the Washington, D.C.-area. The nuclear cleanup program's leaders scheduled to take part in the workshop include Assistant Secretary

  14. SRI2007 Conference - Travel Tips

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Travel Tips Getting to the Hilton Baton Rouge Capitol Center: From the Baton Rouge Metropolitan Airport (BTR) From the New Orleans International Airport (MSY) Shuttles to and from the Baton Rouge Metropolitan Airport are offered by the Hilton Baton Rouge Capitol Center upon prior arrangements with the hotel. Capitol Park Trolley (pdf) offers free service to downtown restaurants and attractions Monday through Friday, 10:30 am - 2:30 pm. Local rental car companies, click here. Parking: The Hilton

  15. Top quark mass measurements

    SciTech Connect

    Hill, Christopher S.; /UC, Santa Barbara

    2004-12-01

    The top quark, with its extraordinarily large mass (nearly that of a gold atom), plays a significant role in the phenomenology of EWSB in the Standard Model. In particular, the top quark mass when combined with the W mass constrains the mass of the as yet unobserved Higgs boson. Thus, a precise determination of the mass of the top quark is a principal goal of the CDF and D0 experiments. With the data collected thus far in Runs 1 and 2 of the Tevatron, CDF and D0 have measured the top quark mass in both the lepton+jets and dilepton decay channels using a variety of complementary experimental techniques. The author presents an overview of the most recent of the measurements.

  16. Top physics: CDF results

    SciTech Connect

    K. Bloom

    2004-06-23

    The top quark plays an important role in the grand scheme of particle physics, and is also interesting on its own merits. We present recent results from CDF on top-quark physics based on 100-200 pb{sup -1} of p{bar p} collision data. We have measured the t{bar t} cross section in different decay modes using several different techniques, and are beginning our studies of top-quark properties. New analyses for this conference include a measurement of {sigma}{sub t{bar t}} in the lepton-plus-jets channel using a neural net to distinguish signal and background events, and measurements of top-quark branching fractions.

  17. Single Top Quark

    SciTech Connect

    Heidi Schellman and Ann Heinson

    2009-03-12

    Fermilab researchers Heidi Schellman and Ann Heinson take a whimsical look at the recent announcement of the discovery of the single top quark, by Fermilab's CDF and DZero experiments.

  18. Top Science of 2013

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Roadrunner firsts pave way for greener, faster supercomputing Top Science of 2013 Our strong interdisciplinary teaming and unique research facilities allow us to develop solutions to complex problems, and to support partners and collaborators, all with the goal of strengthening national security and making a safer world. Roadrunner firsts pave way for more powerful supercomputing placeholder Roadrunner hit the petaflop barrier a few years ago, topping supercomputer lists for years for its power

  19. Adjustable Speed Pumping Applications - Pumping Systems Tip Sheet #11

    SciTech Connect

    2007-01-01

    This two-page tip sheet provides practical tips on application of Adjustable Speed Drives in industrial settings.

  20. Nanomovement of azo polymers induced by metal tip enhanced near-field irradiation

    SciTech Connect

    Ishitobi, Hidekazu; Tanabe, Mamoru; Sekkat, Zouheir; Kawata, Satoshi

    2007-08-27

    Nanomovement of azo polymers induced by metal tip enhanced near-field illumination was studied. A protrusion with 47 nm full width at half maximum was induced with a resolution beyond the diffraction limit. At the top of the protrusion, an anisotropic movement occurs in a direction nearly parallel to the polarization of the incident light, and suggests the existence at the tip end of not only a longitudinal but also a lateral component of the electric field of light. The anisotropic photofluidity and the optical gradient force played important roles in the process of the light induced polymer movement.

  1. Turbine blade tip with offset squealer

    DOEpatents

    Bunker, Ronald Scott

    2001-01-01

    An industrial turbine assembly comprises a plurality of rotating blade portions in a spaced relation with a stationary shroud. The rotating blade includes a root section, an airfoil having a pressure sidewall and a suction sidewall defining an outer periphery and a tip portion having a tip cap. An offset squealer is disposed on the tip cap. The offset squealer is positioned inward from the outer periphery of the rotating blade. The offset squealer increases the flow resistance and reduces the flow of hot gas flow leakage for a given pressure differential across the blade tip portion so as to improve overall turbine efficiency.

  2. Tips: Shopping for Appliances | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Appliances Tips: Shopping for Appliances What's the real cost? Every appliance has two price tags -- the purchase price and the operating cost. Consider both when buying a new...

  3. Tips on Dealing with Culture Shock

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    of Energy Tips for Running an Air Conditioner Without Breaking the Bank Tips for Running an Air Conditioner Without Breaking the Bank July 22, 2014 - 3:15pm Addthis Cooling your home doesn't have to break the bank, with these tips you can save money and stay comfortable.| Photo courtesy of ©iStockphoto.com/galinast Cooling your home doesn't have to break the bank, with these tips you can save money and stay comfortable.| Photo courtesy of ©iStockphoto.com/galinast Elizabeth Spencer

  4. Tips: Programmable Thermostats | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Cool summer tip: In the summer, save money by automatically turning up the air conditioner at ... program. Learn More Thermostats and control systems Home heating systems Home ...

  5. Minimize Boiler Blowdown - Steam Tip Sheet #9

    SciTech Connect

    2012-01-31

    This revised AMO tip sheet on minimizing boiler blowdown provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  6. PAGE Cover: Top Photo

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PAGE Cover: Top Photo Energy Sciences Building. Elevation of the recently completed Energy Sciences Building (ESB) project at Argonne National Laboratory in Lemont, Illinois. The ESB was a capital line-item project funded by the Science Laboratories Infrastructure program at a total cost of $96 million and was completed on August 6, 2014. The ESB project provided 173,000 gross square feet of interdisciplinary research and collaborative space to accommodate a range of physical sciences research

  7. Top Science of 2013

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ChemCam to see if Mars can support life, manned missions Top Science of 2013 Our strong interdisciplinary teaming and unique research facilities allow us to develop solutions to complex problems, and to support partners and collaborators, all with the goal of strengthening national security and making a safer world. ChemCam inpsects Mars: can it support life? placeholder ChemChem's instrumentation aboard the Mars Science Lab's rover Curiosity has made all sorts of discoveries. ChemCam found

  8. Top Science of 2013

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Liquid-scanning technology boosts airport security Top Science of 2013 Our strong interdisciplinary teaming and unique research facilities allow us to develop solutions to complex problems, and to support partners and collaborators, all with the goal of strengthening national security and making a safer world. Liquid-scanning technology boosts airport security placeholder Uniquely combining Magnetic Resonance Imaging (MRI) and X-ray technology, scientists unlocked new threat technology that

  9. Top Science of 2013

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    RAPTOR telescope witnesses black hole birth Top Science of 2013 Our strong interdisciplinary teaming and unique research facilities allow us to develop solutions to complex problems, and to support partners and collaborators, all with the goal of strengthening national security and making a safer world. RAPTOR telescope witnesses black hole birth placeholder The first "thinking telescope" RAPTOR found the birth of big black holes, possibly the most powerful events since the big bang.

  10. Top Science of 2013

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Space probes predict hazards to protect spacecraft Top Science of 2013 Our strong interdisciplinary teaming and unique research facilities allow us to develop solutions to complex problems, and to support partners and collaborators, all with the goal of strengthening national security and making a safer world. Space probes predict hazards to protect spacecraft placeholder Researchers think they've solved a 50-year-old space mystery about how electrons within the Van Allen radiation belts that

  11. Tip cap for a turbine rotor blade

    DOEpatents

    Kimmel, Keith D

    2014-03-25

    A turbine rotor blade with a spar and shell construction, and a tip cap that includes a row of lugs extending from a bottom side that form dovetail grooves that engage with similar shaped lugs and grooves on a tip end of the spar to secure the tip cap to the spar against radial displacement. The lug on the trailing edge end of the tip cap is aligned perpendicular to a chordwise line of the blade in the trailing edge region in order to minimize stress due to the lugs wanting to bend under high centrifugal loads. A two piece tip cap with lugs at different angles will reduce the bending stress even more.

  12. Top Ten Innovations of 2013

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Top Ten Innovations of 2013 Our featurres embrace complex issues around our science, technologies, and mission in a series of mini-articles that provide a context for our historical approach, current problem solving and our vision for the future. Faces of Science 70 Years of Innovations 50 Years of Space LANL Top Science 2014 Top Ten Innovations of 2013 Energy Sustainability Radical Supercomputing Science Digests TOP INNOVATIONS OF 2013 Science and technology for a secure nation Impenetrable

  13. Top physics results at CDF

    SciTech Connect

    Vickey, Trevor; /Illinois U., Urbana

    2005-05-01

    The most recent results on top quark physics at CDF are reported. Measurements of cross-section and mass are presented, and the status of single top quark production searches are discussed. The results obtained from probing various top quark properties are also presented.

  14. Fact Sheet - Tips for Speedy Administrative Review | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Fact Sheet - Tips for Speedy Administrative Review Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: Fact Sheet - Tips for Speedy Administrative Review...

  15. Solid State Lighting FAQ Tip Sheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Solid State Lighting FAQ Tip Sheet Solid State Lighting FAQ Tip Sheet Contains information on solid state lighting applications for energy efficiency in buildings. PDF icon ...

  16. Workplace Charging: Tips to Install Charging Stations at your...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Charging: Tips to Install Charging Stations at your Leased Property Workplace Charging: Tips to Install Charging Stations at your Leased Property Tenants consider many options when ...

  17. Consider Installing a Condensing Economizer - Steam Tip Sheet #26A

    SciTech Connect

    2012-01-01

    This revised AMO tip sheet is part of a series of tip sheets on how to optimize an industrial steam system.

  18. Top quark mass measurements

    SciTech Connect

    L. Cerrito

    2004-07-16

    Preliminary results on the measurement of the top quark mass at the Tevatron Collider are presented. In the dilepton decay channel, the CDF Collaboration measures m{sub t} = 175.0{sub -16.9}{sup +17.4}(stat.){+-}8.4(syst.) GeV/c{sup 2}, using a sample of {approx} 126 pb{sup -1} of proton-antiproton collision data at {radical}s = 1.96 TeV (Run II). In the lepton plus jets channel, the CDF Collaboration measures 177.5{sub -9.4}{sup +12.7}(stat.) {+-} 7.1(syst.) GeV/c{sup 2}, using a sample of {approx} 102 pb{sup -1} at {radical}s = 1.96 TeV. The D0 Collaboration has newly applied a likelihood technique to improve the analysis of {approx} 125 pb{sup -1} of proton-antiproton collisions at {radical}s = 1.8 TeV (Run I), with the result: m{sub t} = 180.1 {+-} 3.6(stat.) {+-}3.9(syst.) GeV/c{sup 2}. The latter is combined with all the measurements based on the data collected in Run I to yield the most recent and comprehensive experimental determination of the top quark mass: m{sub t} = 178.0 {+-} 2.7(stat.) {+-} 3.3(syst.) GeV/c{sup 2}.

  19. Tips: Air Ducts | Department of Energy

    Energy Saver

    Air Ducts Tips: Air Ducts Air ducts: out of sight, out of mind. The unsealed ducts in your attic and crawlspaces lose air, and uninsulated ducts lose heat -- wasting energy and ...

  20. Assorted QCI Tips and Standards Review

    Energy.gov [DOE]

    This document contains a list of tips for taking the Quality Control Inspector (QCI) Home Energy Professional Certification Exam and a review of standards, provided by the University of Illinois, Urbana-Champaign's Indoor Climate Research & Training.

  1. Compressor airfoil tip clearance optimization system

    SciTech Connect

    Little, David A.; Pu, Zhengxiang

    2015-08-18

    A compressor airfoil tip clearance optimization system for reducing a gap between a tip of a compressor airfoil and a radially adjacent component of a turbine engine is disclosed. The turbine engine may include ID and OD flowpath boundaries configured to minimize compressor airfoil tip clearances during turbine engine operation in cooperation with one or more clearance reduction systems that are configured to move the rotor assembly axially to reduce tip clearance. The configurations of the ID and OD flowpath boundaries enhance the effectiveness of the axial movement of the rotor assembly, which includes movement of the ID flowpath boundary. During operation of the turbine engine, the rotor assembly may be moved axially to increase the efficiency of the turbine engine.

  2. Tips: Water Heating | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Water Heating Tips: Water Heating Keep your energy bills out of hot water. Insulate your water heater to save ... Drain-water, or greywater, heat recovery systems capture the energy ...

  3. Tips: Water Heating | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Water Heating Tips: Water Heating Keep your energy bills out of hot water. Insulate your water heater to save energy and money, or choose an on-demand hot water heater to save even ...

  4. Furnace Blower Performance Improvements - Building America Top...

    Energy.gov [DOE] (indexed site)

    Researchers at Lawrence Berkeley National Laboratory (LBNL) garnered a 2013 Top Innovation ... Read about this Top Innovation. See an example of this Top Innovation in action. Find more ...

  5. Building America Top Innovations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Research Building America Top Innovations Building America Top Innovations New Top Innovations are awarded annually for outstanding Building America research achievements. Each ...

  6. Pump Selection Considerations Pumping System Tip Sheet - #2

    SciTech Connect

    None

    2005-10-01

    BestPractices Program tip sheet discussing pumping system efficiency with pumping selection considerations.

  7. Top physics results from CDF

    SciTech Connect

    Gomez, Gervasio; /Cantabria Inst. of Phys.

    2005-05-01

    The top quark is by far the most massive fundamental particle observed so far, and the study of its properties is interesting for several reasons ranging from its possible special role in electroweak symmetry breaking to its sensitivity to physics beyond the Standard Model. They present recent top physics results from CDF based on 160-320 pb{sup -1} of p{bar p} collision data at {radical}s = 1.96 TeV. The t{bar t} cross section and the top mass have been measured in different decay channels and using different methods. they have searched for evidence of single top production, setting upper limits on its production rate. Other results shown in this conference include studies of the polarization of W bosons from top decays, a search for charged Higgs decaying from top, and a search for additional heavy t' quarks.

  8. Top Science News of 2014

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Top Science News of 2014 Top Science News of 2014 Biosurveillance, secure computing, alternative energy, unique capabilities highlight the year December 22, 2014 Top Science News of 2014 Biosurveillance, secure computing, alternative energy, unique capabilities highlight the year. Contact Communications Office "The breadth of scientific expertise and range of disciplines necessary for supporting Los Alamos's national security mission can be seen when reflecting on some of the year's more

  9. WIPP Receives Top Safety Award

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Waste Isolation Pilot Plant (WIPP) received top accolades from New Mexico's leading mining ... contractor, for receiving the New Mexico Mining Association (NMMA) and New Mexico BMS ...

  10. Electrochemical sharpening of field emission tips

    DOEpatents

    Bernhardt, A.F.

    1999-04-06

    A method is disclosed for sharpening field emitter tips by electroetching/polishing. In gated field emitters, it is very important to initiate electron emission at the lowest possible voltage and thus the composition of the emitter and the gate, as well as the emitter-gate structure, are important factors. This method of sharpening the emitter tips uses the grid as a counter electrode in electroetching of the emitters, which can produce extremely sharp emitter tips as well as remove asperities and other imperfections in the emitters, each in relation to the specific grid hole in which it resides. This has the effect of making emission more uniform among the emitters as well as lowering the turn-on voltage. 3 figs.

  11. Electrochemical sharpening of field emission tips

    DOEpatents

    Bernhardt, Anthony F.

    1999-01-01

    A method for sharpening field emitter tips by electroetching/polishing. In gated field emitters, it is very important to initiate electron emission at the lowest possible voltage and thus the composition of the emitter and the gate, as well as the emitter-gate structure, are important factors. This method of sharpening the emitter tips uses the grid as a counter electrode in electroetching of the emitters, which can produce extremely sharp emitter tips as well as remove asperities and other imperfections in the emitters, each in relation to the specific grid hole in which it resides. This has the effect of making emission more uniform among the emitters as well as lowering the turn-on voltage.

  12. Assorted QCI Tips and Standards Review

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Assorted QCI Tips and S tandards R eview (6/11/2015) General Tips for QCI Written Exam * Review your QCI class notes, the 2---page handout on Roles and R esponsibilities between the QC Inspector ( that w orks for a n agency) a nd a 3 rd party Inspector, The QCI Standards (listed on the Q CI Field Exam Checklist), and this d ocument. * Build u p your confidence by reviewing the material frequently, in s mall blocks of time each day f or several days b efore t he e xam. * Browse through t he BPI

  13. Turbine blade squealer tip rail with fence members

    DOEpatents

    Little, David A

    2012-11-20

    A turbine blade includes an airfoil, a blade tip section, a squealer tip rail, and a plurality of chordally spaced fence members. The blade tip section includes a blade tip floor located at an end of the airfoil distal from the root. The blade tip floor includes a pressure side and a suction side joined together at chordally spaced apart leading and trailing edges of the airfoil. The squealer tip rail extends radially outwardly from the blade tip floor adjacent to the suction side and extends from a first location adjacent to the airfoil trailing edge to a second location adjacent to the airfoil leading edge. The fence members are located between the airfoil leading and trailing edges and extend radially outwardly from the blade tip floor and axially from the squealer tip rail toward the pressure side.

  14. Status of the top quark: Top production cross section and top properties

    SciTech Connect

    Boisvert, V.; /Rochester U.

    2006-08-01

    This report describes the latest cross section and property measurements associated with the top quark at the Tevatron Run II. The largest data sample used is 760 pb{sup -1} of integrated luminosity. Due to its large mass, the top quark might be involved in the process of electroweak symmetry breaking, making it a useful probe for signs of new physics.

  15. Tips for Renters and Property Owners | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Homes » Tips for Renters and Property Owners Tips for Renters and Property Owners Tips for Renters and Property Owners If you rent, or if you own a rental unit, you can use many of the tips throughout this guide to save money and energy. Renters You can reduce your utility bills by following the tips in these sections: Lighting Heating and cooling Appliances Home office and home electronics Windows Transportation Encourage your landlord to follow these tips as well. He or she will save energy

  16. Vertically aligned nanostructure scanning probe microscope tips

    DOEpatents

    Guillorn, Michael A.; Ilic, Bojan; Melechko, Anatoli V.; Merkulov, Vladimir I.; Lowndes, Douglas H.; Simpson, Michael L.

    2006-12-19

    Methods and apparatus are described for cantilever structures that include a vertically aligned nanostructure, especially vertically aligned carbon nanofiber scanning probe microscope tips. An apparatus includes a cantilever structure including a substrate including a cantilever body, that optionally includes a doped layer, and a vertically aligned nanostructure coupled to the cantilever body.

  17. Local Mass and Heat Transfer on a Turbine Blade Tip

    DOE PAGES [OSTI]

    Jin, P.; Goldstein, R. J.

    2003-01-01

    Locmore » al mass and heat transfer measurements on a simulated high-pressure turbine blade-tip surface are conducted in a linear cascade with a nonmoving tip endwall, using a naphthalene sublimation technique. The effects of tip clearance (0.86–6.90% of chord) are investigated at various exit Reynolds numbers (4–7 × 10 5 ) and turbulence intensities (0.2 and 12.0%). The mass transfer on the tip surface is significant along its pressure edge at the smallest tip clearance. At the two largest tip clearances, the separation bubble on the tip surface can cover the whole width of the tip on the second half of the tip surface. The average mass-transfer rate is highest at a tip clearance of 1.72% of chord. The average mass-transfer rate on the tip surface is four and six times as high as on the suction and the pressure surface, respectively. A high mainstream turbulence level of 12.0% reduces average mass-transfer rates on the tip surface, while the higher mainstream Reynolds number generates higher local and average mass-transfer rates on the tip surface.« less

  18. Los Alamos National Laboratory top

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    top science news of 2012 December 20, 2012 Scientific advances that caught the world's interest LOS ALAMOS, NEW MEXICO, December 20, 2012-In 2012 Los Alamos National Laboratory made its scientific mark in a wide variety of areas, and the stories that caught the public's attention and that of the science community reflect those broad capabilities. Top science stories for the year traveled from the canyons of Mars to the high desert forests of New Mexico, from cosmic particles to the structure of

  19. Uncovering the single top: observation of electroweak top quark production

    SciTech Connect

    Benitez, Jorge Armando; /Michigan State U.

    2009-08-01

    The top quark is generally produced in quark and anti-quark pairs. However, the Standard Model also predicts the production of only one top quark which is mediated by the electroweak interaction, known as 'Single Top'. Single Top quark production is important because it provides a unique and direct way to measure the CKM matrix element V{sub tb}, and can be used to explore physics possibilities beyond the Standard Model predictions. This dissertation presents the results of the observation of Single Top using 2.3 fb{sup -1} of Data collected with the D0 detector at the Fermilab Tevatron collider. The analysis includes the Single Top muon+jets and electron+jets final states and employs Boosted Decision Tress as a method to separate the signal from the background. The resulting Single Top cross section measurement is: (1) {sigma}(p{bar p} {yields} tb + X, tqb + X) = 3.74{sub -0.74}{sup +0.95} pb, where the errors include both statistical and systematic uncertainties. The probability to measure a cross section at this value or higher in the absence of signal is p = 1.9 x 10{sup -6}. This corresponds to a standard deviation Gaussian equivalence of 4.6. When combining this result with two other analysis methods, the resulting cross section measurement is: (2) {sigma}(p{bar p} {yields} tb + X, tqb + X) = 3.94 {+-} 0.88 pb, and the corresponding measurement significance is 5.0 standard deviations.

  20. Tips: Natural Gas and Oil Heating Systems | Department of Energy

    Energy.gov [DOE] (indexed site)

    more about energy-efficient furnaces and boilers. Addthis Related Articles Tips: Natural Gas and Oil Heating Systems Energy Saver Guide: Tips on Saving Money and Energy at Home...

  1. Tips: Saving Money on Gas | Department of Energy

    Office of Environmental Management (EM)

    Saving Money on Gas Tips: Saving Money on Gas June 17, 2015 - 5:19pm Addthis Tips: Saving Money on Gas In 2014, Americans drove 3.02 trillion miles-the equivalent of 6.2 million...

  2. #tipsEnergy: Saving Energy During Vacation | Department of Energy

    Energy.gov [DOE] (indexed site)

    tips in a Storify to encourage others to save energy and money at home. For this month's tipsEnergy, we want to know how you plan to save energy and money during summer vacation. ...

  3. Consumer Tips for Lowering Your Utility Bill | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    provider offers, you can refer to it along with these tips to reduce your energy use and save money. For in-depth tips on saving energy and money at home, visit EnergySavers.gov....

  4. Tips: Passive Solar Heating and Cooling | Department of Energy

    Office of Environmental Management (EM)

    Passive Solar Heating and Cooling Tips: Passive Solar Heating and Cooling July 27, 2014 - 4:18pm Addthis Tips: Passive Solar Heating and Cooling Using passive solar design to heat...

  5. The relationship between crack-tip strain and subcritical cracking...

    Office of Scientific and Technical Information (OSTI)

    crack-tip strain and subcritical cracking thresholds for steels in high-pressure hydrogen gas. Citation Details In-Document Search Title: The relationship between crack-tip...

  6. 7 Tips for Communicating Your Research to a General Audience

    SciTech Connect

    Labios, Liezel AN

    2014-10-15

    This ~900-word article provides useful tips for scientists (especially early career scientists) to communicate their research.

  7. Cooling circuit for a gas turbine bucket and tip shroud

    DOEpatents

    Willett, Fred Thomas; Itzel, Gary Michael; Stathopoulos, Dimitrios; Plemmons, Larry Wayne; Plemmons, Helen M.; Lewis, Doyle C.

    2002-01-01

    An open cooling circuit for a gas turbine bucket wherein the bucket has an airfoil portion, and a tip shroud, the cooling circuit including a plurality of radial cooling holes extending through the airfoil portion and communicating with an enlarged internal area within the tip shroud before exiting the tip shroud such that a cooling medium used to cool the airfoil portion is subsequently used to cool the tip shroud.

  8. Improve Your Boiler's Combustion Efficiency - Steam Tip Sheet #4

    SciTech Connect

    2012-01-31

    This revised AMO tip sheet helps plants establish a program for the regular inspection, testing and repair of stream traps.

  9. SW New Mexico Oil Well Formation Tops

    SciTech Connect

    Shari Kelley

    2015-10-21

    Rock formation top picks from oil wells from southwestern New Mexico from scout cards and other sources. There are differing formation tops interpretations for some wells, so for those wells duplicate formation top data are presented in this file.

  10. GreenTops | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    GreenTops Jump to: navigation, search Name: GreenTops Place: Israel Product: Israel-based assemblers of PV-modules mainly for the agricultural comunity. References: GreenTops1...

  11. TOP500 | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Our Jobs Working at NNSA Blog Home TOP500 TOP500 Two of the World's Most Powerful Computers work for NNSA Two NNSA supercomputers-Trinity and Sequoia-are among the top six...

  12. DIRECTIONS AND TIPS FOR USING INTEGRITY | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DIRECTIONS AND TIPS FOR USING INTEGRITY DIRECTIONS AND TIPS FOR USING INTEGRITY DIRECTIONS AND TIPS FOR USING INTEGRITY (3-11-16) (202.91 KB) More Documents & Publications DOE BY 2017 IT Reporting Instructions Major IT Business Confidential Financial Disclosure Report Welcome to the Department of Energy’s Recovery Act webinar on reporting in to federalreporting

  13. Final TOPS Rpt-10pt.PDF

    Energy.gov [DOE] (indexed site)

    OPPORTUNITIES TO INCREASE THE PROLIFERATION RESISTANCE OF GLOBAL CIVILIAN NUCLEAR POWER SYSTEMS (TOPS) REPORT BY THE TOPS TASK FORCE OF THE NUCLEAR ENERGY RESEARCH...

  14. Press Pass - Press Release - Single top quark

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Graphics and photos are available at: http:www.fnal.govpubpresspassimagesSingle-Top-Quark-2009.html Fermilab collider experiments discover rare single top quark Batavia, ...

  15. Unvented, Conditioned Attics - Building America Top Innovation...

    Energy.gov [DOE] (indexed site)

    This Top Innovation award demonstrates Building America research from Building Science ... influence code acceptance of this innovation since 2006. Read about this Top Innovation. ...

  16. Basement Insulation Systems - Building America Top Innovation...

    Energy Saver

    Basement Insulation Systems - Building America Top Innovation Basement Insulation Systems - Building America Top Innovation This photo shows a framed basement wall with insulation ...

  17. Vapor Retarder Classification - Building America Top Innovation...

    Energy Saver

    Vapor Retarder Classification - Building America Top Innovation Vapor Retarder Classification - Building America Top Innovation Photo of a vapor retarder classification. Air-tight ...

  18. Extended Glauert tip correction to include vortex rollup effects

    DOE PAGES [OSTI]

    Maniaci, David; Schmitz, Sven

    2016-01-01

    Wind turbine loads predictions by blade-element momentum theory using the standard tip-loss correction have been shown to over-predict loading near the blade tip in comparison to experimental data. This over-prediction is theorized to be due to the assumption of light rotor loading, inherent in the standard tip-loss correction model of Glauert. A higher- order free-wake method, WindDVE, is used to compute the rollup process of the trailing vortex sheets downstream of wind turbine blades. Results obtained serve an exact correction function to the Glauert tip correction used in blade-element momentum methods. Lastly, it is found that accounting for the effectsmore » of tip vortex rollup within the Glauert tip correction indeed results in improved prediction of blade tip loads computed by blade-element momentum methods.« less

  19. Extended Glauert tip correction to include vortex rollup effects

    SciTech Connect

    Maniaci, David; Schmitz, Sven

    2016-01-01

    Wind turbine loads predictions by blade-element momentum theory using the standard tip-loss correction have been shown to over-predict loading near the blade tip in comparison to experimental data. This over-prediction is theorized to be due to the assumption of light rotor loading, inherent in the standard tip-loss correction model of Glauert. A higher- order free-wake method, WindDVE, is used to compute the rollup process of the trailing vortex sheets downstream of wind turbine blades. Results obtained serve an exact correction function to the Glauert tip correction used in blade-element momentum methods. Lastly, it is found that accounting for the effects of tip vortex rollup within the Glauert tip correction indeed results in improved prediction of blade tip loads computed by blade-element momentum methods.

  20. Observation of the Top Quark

    DOE R&D Accomplishments

    Kim, S. B.

    1995-08-01

    Top quark production is observed in{bar p}p collisions at{radical}s= 1.8 TeV at the Fermilab Tevatron. The Collider Detector at Fermilab (CDF) and D{O} observe signals consistent with t{bar t} to WWb{bar b}, but inconsistent with the background prediction by 4.8{sigma} (CDF), 4.6a (D{O}). Additional evidence for the top quark Is provided by a peak in the reconstructed mass distribution. The kinematic properties of the excess events are consistent with the top quark decay. They measure the top quark mass to be 176{plus_minus}8(stat.){plus_minus}10(sys.) GeV/c{sup 2} (CDF), 199{sub -21}{sup+19}(stat.){plus_minus}22(sys.) GeV/c{sup 2} (D{O}), and the t{bar t} production cross section to be 6.8{sub -2.4}{sup+3.6}pb (CDF), 6.4{plus_minus}2.2 pb (D{O}).

  1. Turbine blade tip gap reduction system

    SciTech Connect

    Diakunchak, Ihor S.

    2012-09-11

    A turbine blade sealing system for reducing a gap between a tip of a turbine blade and a stationary shroud of a turbine engine. The sealing system includes a plurality of flexible seal strips extending from a pressure side of a turbine blade generally orthogonal to the turbine blade. During operation of the turbine engine, the flexible seal strips flex radially outward extending towards the stationary shroud of the turbine engine, thereby reducing the leakage of air past the turbine blades and increasing the efficiency of the turbine engine.

  2. Top decays in extended models

    SciTech Connect

    Gaitan, R.; Miranda, O. G.; Cabral-Rosetti, L. G.

    2009-04-20

    Top quark decays are interesting as a mean to test the Standard Model (SM) predictions. The Cabbibo-Kobayashi-Maskawa (CKM)-suppressed process t{yields}cWW, and the rare decays t{yields}cZ, t{yields}H{sup 0}+c, and t{yields}c{gamma} an excellent window to probe the predictions of theories beyond the SM. We evaluate the flavor changing neutral currents (FCNC) decay t{yields}H{sup 0}+c in the context of Alternative Left-Right symmetric Models (ALRM) with extra isosinglet heavy fermions; the FCNC decays may place at tree level and are only supressed by the mixing between ordinary top and charm quarks. We also comment on the decay process t{yields}c+{gamma}, which involves radiative corrections.

  3. Top Innovative Science of 2013

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Natural Gas Glossary › FAQS › Overview Data Summary Prices Exploration & reserves Production Imports/exports Pipelines Storage Consumption All natural gas data reports Analysis & Projections Major Topics Most popular Consumption Exploration & reserves Imports/exports & pipelines Prices Production Projections Recurring Storage All reports Browse by Tag Alphabetical Frequency Tag Cloud Supplement from: U.S. Crude Oil and Natural Gas Proved Reserves Top 100 U.S. Oil and Gas

  4. Measurements of Top Quark Properties

    SciTech Connect

    Cerrito, Lucio

    2009-05-01

    Preliminary results on the measurement of four selected properties of the top quark are presented. The relative fraction of t{bar t} production through gluon fusion has been measured in the t{bar t} dilepton decay channel by the CDF Collaboration as F{sub gg} = 0.53{sub -0.38}{sup +0.36}. Using an integrated luminosity of 2.7 fb{sup -1} collected with the CDF II detector, we also determine the t{bar t} differential cross section with respect to values up to {approx}1 TeV of the t{bar t} invariant mass. We present a model-independent measurement of the helicity of W bosons produced in top quark decays, using an integrated luminosity of up to 2.7 fb{sup -1} collected by the D0 detector, and find the fraction of longitudinal W bosons f{sub 0} = 0.49 {+-} 0.14, and the fraction of right-handed W bosons f{sub +} = 0.11 {+-} 0.08. Finally, we measure the parton level forward-backward asymmetry of pair produced top quarks using an integrated luminosity of 3.2 fb{sup -1} collected with the CDF II detector, and find A{sub FB} = 0.19 {+-} 0.07. All results are consistent with the predictions of the standard model.

  5. Energy Efficiency Tips for Renters and Homeowners | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Efficiency Tips for Renters and Homeowners Energy Efficiency Tips for Renters and Homeowners July 30, 2014 - 4:43pm Addthis You don't have to own a home to save money on your utility bills. Renters and homeowners can save money and energy with a few simple tips. | Photo courtesy of ©iStockphoto.com/KentWeakley You don't have to own a home to save money on your utility bills. Renters and homeowners can save money and energy with a few simple tips. | Photo courtesy of

  6. 10 Energy Saving Tips for Spring | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Saving Tips for Spring 10 Energy Saving Tips for Spring March 20, 2015 - 12:12pm Addthis In addition to the tips mentioned below, <a href="/node/904911">check out this infographic</a> for more ways to lower your energy bills this spring. | Infographic by Sarah Gerrity, Energy Department. In addition to the tips mentioned below, check out this infographic for more ways to lower your energy bills this spring. | Infographic by Sarah Gerrity, Energy Department. Paul

  7. Pumping Tip Sheet #10: Energy Savings Opportunities in Control...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    If the evaluation shows that a control valve is needed, choose the type Energy Tips - ... access these and many other industrial effciency re sources and information on training. ...

  8. Tips for Renters and Property Owners | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    You can reduce your utility bills by following the tips in these sections: Lighting Heating and cooling Appliances Home office and home electronics Windows Transportation Encourage ...

  9. Energy Savers: Tips on Saving Money & Energy at Home

    SciTech Connect

    2011-12-01

    Provides consumers with home energy and money savings tips such as insulation, weatherization, heating, cooling, water heating, energy efficient windows, landscaping, lighting, and energy efficient appliances.

  10. Making Evaluations Work for Your Program: Tips for Success

    Energy.gov [DOE]

    Better Buildings Residential Network Data & Evaluations Peer Exchange Call Series: Making Evaluations Work For Your Program: Tips For Success, Call Slides and Discussion Summary, October 9, 2014.

  11. Tips to Green Your Home | Department of Energy

    Energy Saver

    The site provides an interactive experience that helps people make their homes greener with tips on reducing energy consumption, carbon footprints, waste generation and water ...

  12. Method of cooling gas only nozzle fuel tip

    DOEpatents

    Bechtel, William Theodore; Fitts, David Orus; DeLeonardo, Guy Wayne

    2002-01-01

    A diffusion flame nozzle gas tip is provided to convert a dual fuel nozzle to a gas only nozzle. The nozle tip diverts compressor discharge air from the passage feeding the diffusion nozzle air swirl vanes to a region vacated by removal of the dual fuel components, so that the diverted compressor discharge air can flow to and through effusion holes in the end cap plate of the nozzle tip. In a preferred embodiment, the nozzle gas tip defines a cavity for receiving the compressor discharge air from a peripheral passage of the nozzle for flow through the effusion openings defined in the end cap plate.

  13. Energy Savers: Tips on Saving Money & Energy at Home

    SciTech Connect

    2014-05-01

    Provides consumers with home energy and money savings tips such as insulation, weatherization, heating, cooling, water heating, energy efficient windows, landscaping, lighting, and energy efficient appliances.

  14. Cooking Up Some Energy Saving Tips | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Cooking Up Some Energy Saving Tips Cooking Up Some Energy Saving Tips July 9, 2014 - 3:00am Addthis Spending time in the kitchen can be more energy efficient than ever with these tips. | Photo courtesy of ©iStockphoto.com/andresr Spending time in the kitchen can be more energy efficient than ever with these tips. | Photo courtesy of ©iStockphoto.com/andresr Paige Terlip Paige Terlip Former Communicator, National Renewable Energy Laboratory What does this mean for me? The proper appliances,

  15. Fermilab Today - Safety Tip of the Week Archive

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    4 December 20, 2004 Winter Sun Winter Sun December 13, 2004 Winter Slips Safety Tip December 6, 2004 Winter Cornering Winter Driving' November 29, 2004 SAFER attentiveness November...

  16. Making Evaluations Work for Your Program: Tips for Success |...

    Energy Saver

    Making Evaluations Work for Your Program: Tips for Success Better Buildings Residential ... More Documents & Publications Home Performance with ENERGY STAR -- 10 Years of Continued ...

  17. #tipsEnergy: Weatherizing Your Home for Fall

    Energy.gov [DOE]

    With the start of colder weather, we are sharing fall energy-saving tips that will help you save money and stay comfortable.

  18. Return Condensate to the Boiler - Steam Tip Sheet #8

    SciTech Connect

    2012-01-31

    This revised AMO tip sheet on returning condensate to boilers provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  19. Tips for Understanding the Relationship Between a Web Application...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tips for Understanding the Relationship Between a Web Application and SLAs Tagged on: JavaScript NercEnergy August 18, 2015 August 19, 2015 Programming, Web Application ...

  20. Preheated Combustion Air (International Fact Sheet), Energy Tips-Process Heating, Process Heating Tip Sheet #1c

    SciTech Connect

    Not Available

    2010-10-01

    This English/Chinese international tip sheet provides information for optimizing industrial process heating systems and includes measurements in metric units.

  1. Supercomputing Challenge top winners: Los Alamos schools

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Supercomputing Challenge top winners: Los Alamos schools Supercomputing Challenge top winners: Los Alamos schools Cole Kendrick won the top prize for his research project, "Computer Simulation of Dark Matter Effects on Galaxy Rotation". April 26, 2011 Cole Kendrick Cole Kendrick Contact Steve Sandoval Communications Office (505) 665-9206 Email LOS ALAMOS, New Mexico, April 26, 2011-Los Alamos Middle School student Cole Kendrick won the top prize in the 21st New Mexico Supercomputing

  2. Materials Technologies: Goals, Strategies, and Top Accomplishments

    SciTech Connect

    2010-08-02

    Fact sheet describing the goals, strategies, and top accomplishments of the Materials Technologies subprogram of the Vehicle Technologies Program.

  3. Bullseye: Top Strategies for Targeted Marketing (101)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Better Buildings Residential Network Peer Exchange Call Series: Bullseye: Top Strategies for Targeted Marketing (101), call slides and discussion summary.

  4. Table-top job analysis

    SciTech Connect

    Not Available

    1994-12-01

    The purpose of this Handbook is to establish general training program guidelines for training personnel in developing training for operation, maintenance, and technical support personnel at Department of Energy (DOE) nuclear facilities. TTJA is not the only method of job analysis; however, when conducted properly TTJA can be cost effective, efficient, and self-validating, and represents an effective method of defining job requirements. The table-top job analysis is suggested in the DOE Training Accreditation Program manuals as an acceptable alternative to traditional methods of analyzing job requirements. DOE 5480-20A strongly endorses and recommends it as the preferred method for analyzing jobs for positions addressed by the Order.

  5. MHD Integrated Topping Cycle Project

    SciTech Connect

    Not Available

    1992-07-01

    This eighteenth quarterly technical progress report of the MHD Integrated Topping cycle Project presents the accomplishments during the period November 1, 1991 to January 31, 1992. The precombustor is fully assembled. Manufacturing of all slagging stage components has been completed. All cooling panels were welded in place and the panel/shell gap was filled with RTV. Final combustor assembly is in progress. The low pressure cooling subsystem (LPCS) was delivered to the CDIF. Second stage brazing issues were resolved. The construction of the two anode power cabinets was completed.

  6. MHD Integrated Topping Cycle Project

    SciTech Connect

    Not Available

    1992-03-01

    The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990's, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

  7. MHD Integrated Topping Cycle Project

    SciTech Connect

    Not Available

    1992-01-01

    The overall objective of the project is to design and construct prototypical hardware for an integrated MHD topping cycle, and conduct long duration proof-of-concept tests of integrated system at the US DOE Component Development and Integration Facility in Butte, Montana. The results of the long duration tests will augment the existing engineering design data base on MHD power train reliability, availability, maintainability, and performance, and will serve as a basis for scaling up the topping cycle design to the next level of development, an early commercial scale power plant retrofit. The components of the MHD power train to be designed, fabricated, and tested include: A slagging coal combustor with a rated capacity of 50 MW thermal input, capable of operation with an Eastern (Illinois {number sign}6) or Western (Montana Rosebud) coal, a segmented supersonic nozzle, a supersonic MHD channel capable of generating at least 1.5 MW of electrical power, a segmented supersonic diffuser section to interface the channel with existing facility quench and exhaust systems, a complete set of current control circuits for local diagonal current control along the channel, and a set of current consolidation circuits to interface the channel with the existing facility inverter.

  8. Top Quark Studies at D0

    SciTech Connect

    Peters, Reinhild Yvonne

    2014-11-26

    Years after its discovery in 1995 by CDF and D0, the top quark still undergoes intense investigations at the Tevatron. Using up to the full Run II data sample, new measurements of top quark production and properties by the D0 Collaboration are presented. In particular, the first observation of single top quark s-channel production, the measurement of differential tbar t distributions, forward-backward tbar t asymmetry, a new measurement of the top quark mass, and a measurement of the top quark charge are discussed.

  9. CP Violation in Single Top Quark Production

    SciTech Connect

    Geng, Weigang

    2012-01-01

    We present a search for CP violation in single top quark production with the DØ experiment at the Tevatron proton-antiproton collider. CP violation in the top electroweak interaction results in different single top quark production cross sections for top and antitop quarks. We perform the search in the single top quark final state using 5.4 fb-1 of data, in the s-channel, t-channel, and for both combined. At this time, we do not see an observable CP asymmetry.

  10. MHD Integrated Topping Cycle Project

    SciTech Connect

    Not Available

    1992-07-01

    This seventeenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period August 1, 1991 to October 31, 1991. Manufacturing of the prototypical combustor pressure shell has been completed including leak, proof, and assembly fit checking. Manufacturing of forty-five cooling panels was also completed including leak, proof, and flow testing. All precombustor internal components (combustion can baffle and swirl box) were received and checked, and integration of the components was initiated. A decision was made regarding the primary and backup designs for the 1A4 channel. The assembly of the channel related prototypical hardware continued. The cathode wall electrical wiring is now complete. The mechanical design of the diffuser has been completed.

  11. EEBA Builder's Guides - Building America Top Innovation | Department...

    Energy.gov [DOE] (indexed site)

    Image showing EEBA Builder's Guides book covers. This Top Innovation highlights the ... Read the Top Innovation profile on the EEBA Builder Guides. View other Top Innovations in ...

  12. Ducts in Conditioned Space - Building America Top Innovation...

    Energy.gov [DOE] (indexed site)

    For this Top Innovation profile, Building America researchers worked with production ... Read about this Top Innovation. See an example of this Top Innovation in action. Find more ...

  13. Building America Top Innovations Hall of Fame Profile - Building...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building America Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance Building America Top ...

  14. Top 10 Most Popular Energy Savers Web Pages of 2011 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Most Popular Energy Savers Web Pages of 2011 Top 10 Most Popular Energy Savers Web Pages of 2011 December 27, 2011 - 9:08am Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory 2011 proved to be another successful year for consumers wanting to save money and energy at home. The Energy Savers website continues to be a great resource for readers interested in learning more about energy efficiency and tips for saving money and energy at home and on the road-and

  15. CO tip functionalization in subatomic resolution atomic force microscopy

    SciTech Connect

    Kim, Minjung; Chelikowsky, James R.

    2015-10-19

    Noncontact atomic force microscopy (nc-AFM) employing a CO-functionalized tip displays dramatically enhanced resolution wherein covalent bonds of polycyclic aromatic hydrocarbon can be imaged. Employing real-space pseudopotential first-principles calculations, we examine the role of CO in functionalizing the nc-AFM tip. Our calculations allow us to simulate full AFM images and ascertain the enhancement mechanism of the CO molecule. We consider two approaches: one with an explicit inclusion of the CO molecule and one without. By comparing our simulations to existing experimental images, we ascribe the enhanced resolution of the CO functionalized tip to the special orbital characteristics of the CO molecule.

  16. Fall and Winter Energy-Saving Tips | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fall and Winter Energy-Saving Tips Fall and Winter Energy-Saving Tips Simple and inexpensive actions can help you save energy and money during the cool fall and winter months. | Photo courtesy of ©iStockphoto.com. Simple and inexpensive actions can help you save energy and money during the cool fall and winter months. | Photo courtesy of ©iStockphoto.com. This article will help you find strategies to help you save energy during the cool fall and cold winter months. Some of the tips below are

  17. Considerations When Selecting a Condensing Economizer - Steam Tip Sheet #26B

    SciTech Connect

    2012-01-01

    This revised AMO tip sheet is part of a series of tip sheets on how to optimize an industrial steam system.

  18. Top quark mass measurements at CDF

    SciTech Connect

    Brubaker, Erik; /Chicago U., EFI

    2006-05-01

    The mass of the top quark M{sub top} is interesting both as a fundamental parameter of the standard model and as an important input to precision electroweak tests. The Collider Detector at Fermilab (CDF) has a robust program of top quark mass analyses, including the most precise single measurement, M{sub top} = 173.4 {+-} 2.8 GeV/c{sup 2}, using 680 pb{sup -1} of p{bar p} collision data. A combination of current results from CDF gives M{sub top} = 172.0 {+-} 2.7 GeV/c{sup 2}, surpassing the stated goal of 3 GeV/c{sup 2} precision using 2 fb{sup -1} of data. Finally, a combination with current D0 results gives a world average top quark mass of 172.5 {+-} 2.3 GeV/c{sup 2}.

  19. LANL named 2010 top corporate volunteer organization

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2010 top corporate volunteer organization LANL named 2010 top corporate volunteer organization The Laboratory ranked ahead of dozens of other qualifying companies with 10,000 or more employees. May 18, 2011 Building and painting birdhouses with children in Santa Fe Building and painting birdhouses with children in Santa Fe. Contact Steve Sandoval Communications Office (505) 665-9206 Email LOS ALAMOS, New Mexico, May 18, 2011-Los Alamos National Laboratory has earned an award as the top corporate

  20. Top quark mass measurements at CDF

    SciTech Connect

    Maki, Tuula; /Helsinki U. /Helsinki Inst. of Phys.

    2007-10-01

    The top quark mass is interesting both as a fundamental parameter of the standard model as well as an important input to precision electroweak tests. The CDF Collaboration has measured the top quark mass with high precision in all decay channels with complementary methods. A combination of the results from CDF gives a top quark mass of 170.5{+-}1.3(stat.){+-}1.8(syst.) GeV/c{sup 2}.

  1. Unvented, Conditioned Crawlspaces - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Crawlspaces - Building America Top Innovation Unvented, Conditioned Crawlspaces - Building America Top Innovation This photo shows the interior of a framed crawlspace with insulation installed. This Top Innovation profile highlights Building America research into the benefits of closed, conditioned crawlspaces over traditional vented crawlspaces. Crawlspace vents are supposed to prevent moisture problems, based on the assumption that fresh air entering through vents on

  2. Vapor Retarder Classification - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Vapor Retarder Classification - Building America Top Innovation Vapor Retarder Classification - Building America Top Innovation Photo of a vapor retarder classification. Air-tight and well-insulated homes have little or no tolerance for drying if they get wet; moisture control is critical. This Top Innovation profile describes Building America research that established vapor retarder classifications and appropriate applications that has been instrumental in the market

  3. Top Quark Production Asymmetries AFBt and AFBl

    DOE PAGES [OSTI]

    Berger, Edmond L.; Cao, Qing-Hong; Chen, Chuan-Ren; Yu, Jiang-Hao; Zhang, Hao

    2012-02-14

    A large forward-backward asymmetry is seen in both the top quark rapidity distribution AFBt and in the rapidity distribution of charged leptons AFBl from top quarks produced at the Tevatron. We study the kinematic and dynamic aspects of the relationship of the two observables arising from the spin correlation between the charged lepton and the top quark with different polarization states. We emphasize the value of both measurements, and we conclude that a new physics model which produces more right-handed than left-handed top quarks is favored by the present data.

  4. Exploring Stratocumulus Cloud-Top Entrainment Processes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Reference(s) Albrecht B, M Fang, and V Ghate. 2016. "Exploring Stratocumulus Cloud-Top ... Contributors Bruce A. Albrecht, University of Miami Entrainment velocities from the eddy ...

  5. Unvented, Conditioned Crawlspaces - Building America Top Innovation...

    Energy.gov [DOE] (indexed site)

    This Top Innovation profile highlights Building America research into the benefits of ... Thousands of homes have now been constructed with this important innovation. Read about ...

  6. Dateline Los Alamos: Top Science News

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Science News of 2014 December 22, 2014 Dateline Los Alamos: Top Science News of 2014 Biosurveillance, secure computing, alternative energy, unique capabilities highlight the year....

  7. Mesa Top Photovoltaic Array (Fact Sheet)

    SciTech Connect

    Not Available

    2009-07-01

    Fact sheet overview of the Mesa Top Photovoltaic Array project implemented by the Department of Energy Golden Office and National Renewable Energy Laboratory.

  8. Infrastructure Development- Building America Top Innovations

    Energy.gov [DOE]

    Top Innovations in this category include research results that have influenced codes and standards and improvements in education and the transaction process.

  9. Deaerators in Industrial Steam Systems - Steam Tip Sheet #18

    SciTech Connect

    2006-01-01

    This revised AMO tip sheet on deaerators in industrial steam systems provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  10. Smart, simple energy-saving tips to beat the heat

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Publications Tribal Affairs Newsroom Search News Articles... Search Smart, simple energy-saving tips to beat the heat 7292015 2:02 PM Tweet Page Content BPA and its electric...

  11. Tips to Save Energy During the Holidays | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    the festivities; the tips below will help you save energy and money even as you celebrate. ... Purchase Energy-Efficient Gifts Whether your goal is to help the recipient save money or ...

  12. Fermilab Today - Safety Tip of the Week Archive

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    tips for avoiding injury during snow removal. Fitness - The frequency and severity of heart attacks peak in winter. If you are over 45 and sedentary, avoid shoveling unless you...

  13. Alan Alda to offer science communication tips > Archived News...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    to offer science communication tips May 8th, 2013 By Anne Ju Actor, director and writer Alan Alda will visit campus May 21-24 to lead a workshop for scientists on communicating...

  14. Cooling circuit for a gas turbine bucket and tip shroud

    DOEpatents

    Willett, Fred Thomas

    2004-07-13

    An open cooling circuit for a gas turbine airfoil and associated tip shroud includes a first group of cooling holes internal to the airfoil and extending in a radially outward direction generally along a leading edge of the airfoil; a second group of cooling holes internal to the airfoil and extending in a radially outward direction generally along a trailing edge of the airfoil. A common plenum is formed in the tip shroud in direct communication with the first and second group of cooling holes, but a second plenum may be provided for the second group of radial holes. A plurality of exhaust holes extends from the plenum(s), through the tip shroud and opening along a peripheral edge of the tip shroud.

  15. Recover Heat from Boiler Blowdown - Steam Tip Sheet #10

    SciTech Connect

    2012-01-31

    This revised AMO tip sheet on recovering heat from boiler blowdown provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  16. Minimize Boiler Short Cycling Losses - Steam Tip Sheet #16

    SciTech Connect

    2012-01-01

    This revised AMO tip sheet on minimizing boiler short cycling losses provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  17. Install and Automatic Blowdown Control System - Steam Tip Sheet #23

    SciTech Connect

    2012-01-01

    This revised AMO steam tip sheet on installing automatic blowdown controls provide how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  18. Inspect and Repair Steam Traps - Steam Tip Sheet #1

    SciTech Connect

    2012-01-31

    This revised AMO tip sheet on inspecting and repairing steam traps provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  19. Cover Heated, Open Vessels - Steam Tip Sheet #19

    SciTech Connect

    2012-01-01

    This revised AMO steam tip sheet on covering heated, open vessels provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  20. Minimize Boiler Short Cycling Losses - Steam Tip Sheet #16

    SciTech Connect

    2006-01-01

    This revised AMO tip sheet on minimizing boiler short cycling losses provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  1. Deaerators in Industrial Steam Systems - Steam Tip Sheet #18

    SciTech Connect

    2012-01-01

    This revised AMO tip sheet on deaerators in industrial steam systems provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  2. MHD Integrated Topping Cycle Project

    SciTech Connect

    Not Available

    1992-02-01

    This fourteenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period November 1, 1990 to January 31, 1991. Testing of the High Pressure Cooling Subsystem electrical isolator was completed. The PEEK material successfully passed the high temperature, high pressure duration tests (50 hours). The Combustion Subsystem drawings were CADAM released. The procurement process is in progress. An equipment specification and RFP were prepared for the new Low Pressure Cooling System (LPCS) and released for quotation. Work has been conducted on confirmation tests leading to final gas-side designs and studies to assist in channel fabrication.The final cathode gas-side design and the proposed gas-side designs of the anode and sidewall are presented. Anode confirmation tests and related analyses of anode wear mechanisms used in the selection of the proposed anode design are presented. Sidewall confirmation tests, which were used to select the proposed gas-side design, were conducted. The design for the full scale CDIF system was completed. A test program was initiated to investigate the practicality of using Avco current controls for current consolidation in the power takeoff (PTO) regions and to determine the cause of past current consolidation failures. Another important activity was the installation of 1A4-style coupons in the 1A1 channel. A description of the coupons and their location with 1A1 channel is presented herein.

  3. Top-of-Rail lubricant

    SciTech Connect

    Alzoubi, M. F.; Fenske, G. R.; Erck, R. A.; Boparai, A. S.

    2000-07-14

    Analysis of the volatile and semivolatile fractions collected after use of the TOR lubricant indicated that other than contaminants in the collection laboratory, no compounds on the EPA's Target Compound Lists (Tables 2 and 5) were detected in these fractions. The data of these qualitative analyses, given in the various tables in the text, indicate only the relative amounts of the tentatively identified compounds. The authors recommend that quantitative analysis be performed on the volatile and semivolatile fractions to allow confirmation of the tentatively identified compounds and to obtain absolute amounts of the detected compounds. Additionally, the semivolatile fraction should be analyzed by liquid chromatography/mass spectrometry to identify compounds that are not chromatographable under the temperature program used for determination of semivolatile compounds. Introducing the top-of-rail (TOR) lubricant into the wheel/rail interface results in a reduction of almost 60% of lateral friction force over the forces encountered under dry conditions. This reveals good potential for energy savings, as well as wear reduction, for railroad companies. In TOR lubrication, an increase in the angle of attack and axle load results in increased lateral friction and rate of lubricant consumption. The most efficient TOR lubricant quantity to be used in the wheel/rail interface must be calculated precisely according to the number of cars, axle loads, train speed, and angle of attack.

  4. Vehicle Technologies Program: Goals, Strategies, and Top Accomplishmen...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Program: Goals, Strategies, and Top Accomplishments (Brochure), Vehicle Technologies Program (VTP) Vehicle Technologies Program: Goals, Strategies, and Top Accomplishments ...

  5. Workplace Charging: Tips to Install Charging Stations at your Leased

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Property | Department of Energy Charging: Tips to Install Charging Stations at your Leased Property Workplace Charging: Tips to Install Charging Stations at your Leased Property Tenants consider many options when shopping for space that can meet their organizations' needs, including sustainability, transportation, and technology requirements. Although they do not own the property, tenants can actively manage their sustainability and transportation profiles by choosing progressive facilities

  6. 6 Energy Saving Tips for Commercial Refrigerators and Freezers | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy 6 Energy Saving Tips for Commercial Refrigerators and Freezers 6 Energy Saving Tips for Commercial Refrigerators and Freezers February 28, 2014 - 6:11pm Addthis Dale Linkous carries pizza out of the walk-in freezer in the kitchen at the National Renewable Energy Laboratory in Golden, Colorado. The Energy Department <a href="http://energy.gov/articles/new-energy-efficiency-standards-commercial-refrigeration-equipment-cut-businesses-energy">announced new energy

  7. LANSCE | Lujan Center | Tips for Writing Beamtime Proposals

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Aaron Couture (acting) 505.667.1730 Deputy Leader Fredrik Tovesson 505.665.9652 Deputy Leader & Experimental Area Manager Charles Kelsey 505.665.5579 Experiment Coordinator Charles Kelsey (acting) 505.667.8755 User Program Administration lujan-uo@lanl.gov Administrative Assistant Julie Quintana-Valdez 505.665.5390 Department of Energy, National Nuclear Security Administration nnsa.energy.gov Tips for Writing Beamtime Proposals LANSCE User Resources Tips for a Successful Proposal Proposals

  8. Electronic Questionnaire for Investigations Processing (e-QIP) Tip Sheet

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    e-QIP Tip Sheet (07-2016) SNL Personnel Security Clearance Office Page 1 of 7 Electronic Questionnaire for Investigations Processing (e-QIP) Tip Sheet *********************************BE ADVISED********************************* o You MUST follow the instructions provided in this document in addition to the instructions provided in the SF 86 e-QIP application. o Failure to follow the instructions provided in this document may result in your submission being rejected back to you to be redone. o It

  9. Replace Pressure-Reducing Valves with Backpressure Turbogenerators (International Fact Sheet), Energy Tips-Steam, Steam Tip Sheet #20c

    SciTech Connect

    Not Available

    2010-10-01

    This English/Chinese ITP steam tip sheet on replacing pressure-reducing valves provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  10. TOP500 Supercomputers for June 2002

    SciTech Connect

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2002-06-20

    19th Edition of TOP500 List of World's Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.;&BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 19th edition of the TOP500 list of the worlds fastest supercomputers was released today (June 20, 2002). The recently installed Earth Simulator supercomputer at the Earth Simulator Center in Yokohama, Japan, is as expected the clear new number 1. Its performance of 35.86 Tflop/s (trillions of calculations per second) running the Linpack benchmark is almost five times higher than the performance of the now No.2 IBM ASCI White system at Lawrence Livermore National Laboratory (7.2 Tflop/s). This powerful leap frogging to the top by a system so much faster than the previous top system is unparalleled in the history of the TOP500.

  11. The Top Quark, QCD, And New Physics.

    DOE R&D Accomplishments

    Dawson, S.

    2002-06-01

    The role of the top quark in completing the Standard Model quark sector is reviewed, along with a discussion of production, decay, and theoretical restrictions on the top quark properties. Particular attention is paid to the top quark as a laboratory for perturbative QCD. As examples of the relevance of QCD corrections in the top quark sector, the calculation of e{sup+}e{sup -}+ t{bar t} at next-to-leading-order QCD using the phase space slicing algorithm and the implications of a precision measurement of the top quark mass are discussed in detail. The associated production of a t{bar t} pair and a Higgs boson in either e{sup+}e{sup -} or hadronic collisions is presented at next-to-leading-order QCD and its importance for a measurement of the top quark Yulrawa coupling emphasized. Implications of the heavy top quark mass for model builders are briefly examined, with the minimal supersymmetric Standard Model and topcolor discussed as specific examples.

  12. Effects of increasing tip velocity on wind turbine rotor design.

    SciTech Connect

    Resor, Brian Ray; Maniaci, David Charles; Berg, Jonathan Charles; Richards, Phillip William

    2014-05-01

    A reduction in cost of energy from wind is anticipated when maximum allowable tip velocity is allowed to increase. Rotor torque decreases as tip velocity increases and rotor size and power rating are held constant. Reduction in rotor torque yields a lighter weight gearbox, a decrease in the turbine cost, and an increase in the capacity for the turbine to deliver cost competitive electricity. The high speed rotor incurs costs attributable to rotor aero-acoustics and system loads. The increased loads of high speed rotors drive the sizing and cost of other components in the system. Rotor, drivetrain, and tower designs at 80 m/s maximum tip velocity and 100 m/s maximum tip velocity are created to quantify these effects. Component costs, annualized energy production, and cost of energy are computed for each design to quantify the change in overall cost of energy resulting from the increase in turbine tip velocity. High fidelity physics based models rather than cost and scaling models are used to perform the work. Results provide a quantitative assessment of anticipated costs and benefits for high speed rotors. Finally, important lessons regarding full system optimization of wind turbines are documented.

  13. Stress corrosion crack tip microstructure in nickel-based alloys

    SciTech Connect

    Shei, S.A.; Yang, W.J.

    1994-04-01

    Stress corrosion cracking behavior of several nickel-base alloys in high temperature caustic environments has been evaluated. The crack tip and fracture surfaces were examined using Auger/ESCA and Analytical Electron Microscopy (AEM) to determine the near crack tip microstructure and microchemistry. Results showed formation of chromium-rich oxides at or near the crack tip and nickel-rich de-alloying layers away from the crack tip. The stress corrosion resistance of different nickel-base alloys in caustic may be explained by the preferential oxidation and dissolution of different alloying elements at the crack tip. Alloy 600 (UNS N06600) shows good general corrosion and intergranular attack resistance in caustic because of its high nickel content. Thermally treated Alloy 690 (UNS N06690) and Alloy 600 provide good stress corrosion cracking resistance because of high chromium contents along grain boundaries. Alloy 625 (UNS N06625) does not show as good stress corrosion cracking resistance as Alloy 690 or Alloy 600 because of its high molybdenum content.

  14. Top quark mass measurement at the Tevatron

    SciTech Connect

    Guimaraes da Costa, Joao; /Harvard U.

    2004-12-01

    The authors report on the latest experimental measurements of the top quark mass by the CDF and D0 Collaborations at the Fermilab Tevatron. They present a new top mass measurement using the t{bar t} events collected by the D0 Collaboration in Run I between 1994 and 1996. This result is combined with previous measurements to yield a new world top mass average. They also describe several preliminary results using up to 193 pb{sup -1} of t{bar t} events produced in {bar p}p collisions at {radical}s = 1.96 TeV during the Run II of the Tevatron.

  15. Top quark properties from the Tevatron

    SciTech Connect

    Klute, Markus; /MIT, LNS

    2006-05-01

    This report describes latest measurements and studies of top quark properties from the Tevatron in Run II with an integrated luminosity of up to 750 pb{sup -1}. Due to its large mass of about 172 GeV/c{sup 2}, the top quark provides a unique environment for tests of the Standard Model and is believed to yield sensitivity to new physics beyond the Standard Model. With data samples of close to 1 fb{sup -1} the CDF and D0 collaborations at the Tevatron enter a new area of precision top quark measurements.

  16. Precision Determination of the Top Quark Mass

    SciTech Connect

    Movilla Fernandez, Pedro A.; /LBL, Berkeley

    2007-05-01

    The CDF and D0 collaborations have updated their measurements of the mass of the top quark using proton-antiproton collisions at {radical}s = 1.96 TeV produced at the Tevatron. The uncertainties in each of the top-antitop decay channels have been reduced. The new Tevatron average for the mass of the top quark based on about 1 fb{sup -1} of data per experiment is 170.9 {+-} 1.8 GeV/c{sup 2}.

  17. NERSC Supports Top Breakthroughs of 2013

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Supports 2013's Top Breakthroughs NERSC Supports Top Breakthroughs of 2013 December 20, 2013 Linda Vu, +1 510 495 2402, lvu@lbl.gov Research supported by NERSC is being honored by end-of-year reviews in two leading magazines: Physics World and WIRED. The IceCube South Pole Neutrino Observatory was notably named to both lists, being honored as the most important discovery by Physics World. Three of Physics World's top 10 breakthroughs of 2013 went to discoveries that used NERSC resources. In

  18. Ferroelectric Switching by the Grounded Scanning Probe Microscopy Tip

    DOE PAGES [OSTI]

    Ievlev, Anton V.; Morozovska, A. N.; Shur, Vladimir Ya.; Kalinin, Sergei V.

    2015-06-19

    The process of polarization reversal by the tip of scanning probe microscope was intensively studied for last two decades. Number of the abnormal switching phenomena was reported by the scientific groups worldwide. In particularly it was experimentally and theoretically shown that slow dynamics of the surface screening controls kinetics of the ferroelectric switching, backswitching and relaxation and presence of the charges carriers on the sample surface and in the sample bulk significantly change polarization reversal dynamics. Here we experimentally demonstrated practical possibility of the history dependent polarization reversal by the grounded SPM tip. This phenomenon was attributed to induction ofmore » the slowly dissipating charges into the surface of the grounded tip that enables polarization reversal under the action of the produced electric field. Analytical and numerical electrostatic calculations allow additional insight into nontrivial abnormal switching phenomena reported earlier.« less

  19. Ferroelectric Switching by the Grounded Scanning Probe Microscopy Tip

    SciTech Connect

    Ievlev, Anton V.; Morozovska, A. N.; Shur, Vladimir Ya.; Kalinin, Sergei V.

    2015-06-19

    The process of polarization reversal by the tip of scanning probe microscope was intensively studied for last two decades. Number of the abnormal switching phenomena was reported by the scientific groups worldwide. In particularly it was experimentally and theoretically shown that slow dynamics of the surface screening controls kinetics of the ferroelectric switching, backswitching and relaxation and presence of the charges carriers on the sample surface and in the sample bulk significantly change polarization reversal dynamics. Here we experimentally demonstrated practical possibility of the history dependent polarization reversal by the grounded SPM tip. This phenomenon was attributed to induction of the slowly dissipating charges into the surface of the grounded tip that enables polarization reversal under the action of the produced electric field. Analytical and numerical electrostatic calculations allow additional insight into nontrivial abnormal switching phenomena reported earlier.

  20. Ferroelectric Switching by the Grounded Scanning Probe Microscopy Tip

    SciTech Connect

    Ievlev, Anton; Morozovska, A. N.; Shur, Vladimir Ya.; Kalinin, Sergei V

    2015-01-01

    The process of polarization reversal by the tip of scanning probe microscope was intensively studied for last two decades. Number of the abnormal switching phenomena was reported by the scientific groups worldwide. In particularly it was experimentally and theoretically shown that slow dynamics of the surface screening controls kinetics of the ferroelectric switching, backswitching and relaxation and presence of the charges carriers on the sample surface and in the sample bulk significantly change polarization reversal dynamics. Here we experimentally demonstrated practical possibility of the history dependent polarization reversal by the grounded SPM tip. This phenomenon was attributed to induction of the slowly dissipating charges into the surface of the grounded tip that enables polarization reversal under the action of the produced electric field. Analytical and numerical electrostatic calculations allow additional insight into nontrivial abnormal switching phenomena reported earlier.

  1. Dark Decay of the Top Quark

    SciTech Connect

    Kong, Kyoungchul; Lee, Hye-Sung; Park, Myeonghun

    2014-04-01

    We suggest top quark decays as a venue to search for light dark force carriers. The top quark is the heaviest particle in the standard model whose decays are relatively poorly measured, allowing sufficient room for exotic decay modes from new physics. A very light (GeV scale) dark gauge boson (Z') is a recently highlighted hypothetical particle that can address some astrophysical anomalies as well as the 3.6sigma deviation in the muon g-2 measurement. We present and study a possible scenario that top quark decays as t-->bW+Z's. This is the same as the dominant top quark decay (t-->bW) accompanied by one or multiple dark force carriers. The Z' can be easily boosted, and it can decay into highly collimated leptons (lepton-jet) with large branching ratio. We discuss the implications for the Large Hadron Collider experiments including the analysis based on the lepton-jets.

  2. Press Pass - Press Release - Single Top

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    DZero finds evidence of rare single top quark; Observation marks a step closer to finding Higgs boson Batavia, Ill.--Scientists of the DZero collaboration at the Department of...

  3. Top Quark Physics at the Tevatron

    SciTech Connect

    Jung, Andreas W.

    2015-05-21

    An overview of recent top quark measurements using the full Run II data set of CDF or D0 at the Tevatron is presented. Results are complementary to the ones at the LHC. Recent measurements of the production cross section of top quarks in strong and electroweak production and of top quark production asymmetries are presented. The latter includes the measurement of the tt-bar production asymmetry by D0 in the dilepton decay channel. Within their uncertainties the results from all these measurements agree with their respective Standard Model expectation. Finally latest updates on measurements of the top quark mass are discussed, which at the time of the conference are the most precise determinations.

  4. Dark decay of the top quark

    SciTech Connect

    Kong, Kyoungchul; Lee, Hye -Sung; Park, Myeonghun

    2014-04-01

    We suggest top quark decays as a venue to search for light dark force carriers. Top quark is the heaviest particle in the standard model whose decays are relatively poorly measured, allowing sufficient room for exotic decay modes from new physics. A very light (GeV scale) dark gauge boson (Z') is a recently highlighted hypothetical particle that can address some astrophysical anomalies as well as the 3.6 σ deviation in the muon g-2 measurement. We present and study a possible scenario that top quark decays as t → b W + Z's. This is the same as the dominant top quark decay (t → b W) accompanied by one or multiple dark force carriers. The Z' can be easily boosted, and it can decay into highly collimated leptons (lepton-jet) with large branching ratio. In addition, we discuss the implications for the Large Hadron Collider experiments including the analysis based on the lepton-jets.

  5. JLab Cluster Tops 100 Teraflops | Jefferson Lab

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    JLab Cluster Tops 100 Teraflops JLab Cluster Tops 100 Teraflops NEWPORT NEWS, VA, Oct. 14 - The fastest computer system in Hampton Roads has booted up with more than 100 Teraflops of processing power. Located at the Department of Energy's Thomas Jefferson National Accelerator Facility, the cluster computer system was recently upgraded with video game components to assist scientists in modeling the smallest bits of matter in the universe. "Our resources crossed 100 Teraflops of sustained

  6. The Discovery of the Top Quark

    DOE R&D Accomplishments

    Sinervo, P.K.

    1995-12-01

    The top quark and the Higgs boson are the heaviest elementary particles predicted by the standard model. The four lightest quark flavours, the up, down, strange and charm quarks, were well-established by the mid-1970's. The discovery in 1977 of the {Tau} resonances, a new family of massive hadrons, required the introduction of the fifth quark flavour. Experimental and theoretical studies have indicated that this quark also has a heavier partner, the top quark.

  7. Tools for top physics at CDF

    SciTech Connect

    Palencia, E.; /Fermilab

    2008-07-01

    The authors describe here the different tools used for top physics analysis in the CDF Collaboration. In particular, they discuss how the jet energy scale, lepton identification, b tagging algorithms and the neural networks help to improve the signal to background ratio of the top sample in some cases and to reduce the dominant uncertainties in other. Results using each one of these tools are also presented.

  8. Clean Firetube Boiler Waterside Heat Transfer Surfaces, Energy Tips: STEAM, Steam Tip Sheet #7 (Fact Sheet)

    SciTech Connect

    Not Available

    2012-04-01

    A steam energy tip sheet for the Advanced Manufacturing Office (AMO). The prevention of scale formation in firetube boilers can result in substantial energy savings. Scale deposits occur when calcium, magnesium, and silica, commonly found in most water supplies, react to form a continuous layer of material on the waterside of the boiler heat exchange tubes. Scale creates a problem because it typically possesses a thermal conductivity, an order of magnitude less than the corresponding value for bare steel. Even thin layers of scale serve as an effective insulator and retard heat transfer. The result is overheating of boiler tube metal, tube failures, and loss of energy efficiency. Fuel consumption may increase by up to 5% in firetube boilers because of scale. The boilers steam production may be reduced if the firing rate cannot be increased to compensate for the decrease in combustion efficiency. Energy losses as a function of scale thickness and composition are given. Any scale in a boiler is undesirable. The best way to deal with scale is not to let it form in the first place. Prevent scale formation by: (1) Pretreating of boiler makeup water (using water softeners, demineralizers, and reverse osmosis to remove scale-forming minerals); (2) Injecting chemicals into the boiler feedwater; and (3) Adopting proper boiler blowdown practices.

  9. In situ scanning tunneling microscope tip treatment device for spin polarization imaging

    DOEpatents

    Li, An-Ping [Oak Ridge, TN; Jianxing, Ma [Oak Ridge, TN; Shen, Jian [Knoxville, TN

    2008-04-22

    A tip treatment device for use in an ultrahigh vacuum in situ scanning tunneling microscope (STM). The device provides spin polarization functionality to new or existing variable temperature STM systems. The tip treatment device readily converts a conventional STM to a spin-polarized tip, and thereby converts a standard STM system into a spin-polarized STM system. The tip treatment device also has functions of tip cleaning and tip flashing a STM tip to high temperature (>2000.degree. C.) in an extremely localized fashion. Tip coating functions can also be carried out, providing the tip sharp end with monolayers of coating materials including magnetic films. The device is also fully compatible with ultrahigh vacuum sample transfer setups.

  10. Measurement of top quark polarisation in t-channel single top quark production

    DOE PAGES [OSTI]

    Khachatryan, Vardan

    2016-04-13

    Our first measurement of the top quark spin asymmetry, sensitive to the top quark polarisation, in t-channel single top quark production is presented. It is based on a sample of pp collisions at a centre-of-mass energy of 8 TeV corresponding to an integrated luminosity of 19.7 fb-1. A high-purity sample of t-channel single top quark events with an isolated muon is selected. Signal and background components are estimated using a fit to data. Furthermore, a differential cross section measurement, corrected for detector effects, of an angular observable sensitive to the top quark polarisation is performed. The differential distribution is usedmore » to extract a top quark spin asymmetry of 0.26 ± 0.03 (stat) ± 0.10 (syst), which is compatible with a p-value of 4.6% with the standard model prediction of 0.44.« less

  11. Measurement of top quark polarisation in t-channel single top quark production

    SciTech Connect

    Khachatryan, Vardan

    2015-11-09

    Our first measurement of the top quark spin asymmetry, sensitive to the top quark polarisation, in t-channel single top quark production is presented. It is based on a sample of pp collisions at a centre-of-mass energy of 8 TeV corresponding to an integrated luminosity of 19.7 fb-1. A high-purity sample of t-channel single top quark events with an isolated muon is selected. Signal and background components are estimated using a fit to data. Furthermore, a differential cross section measurement, corrected for detector effects, of an angular observable sensitive to the top quark polarisation is performed. The differential distribution is used to extract a top quark spin asymmetry of 0.26 ± 0.03 (stat) ± 0.10 (syst), which is compatible with a p-value of 4.6% with the standard model prediction of 0.44.

  12. Top Quark Properties in Little Higgs Models

    SciTech Connect

    Berger, C.F.; Perelstein, M.; Petriello, F.; /Wisconsin U., Madison

    2005-12-08

    Identifying the mechanism which breaks electroweak symmetry and generates fermion masses is one of the main physics goals for both the LHC and the ILC. Studies of the top quark have the potential to illuminate this issue; since it is the heaviest of the Standard Model (SM) fermions, the top is expected to couple strongly to the symmetry-breaking sector. Consequently, the structure of that sector can have significant, potentially observable effects on the properties of the top. for example, it is well known that the vector and axial t{bar t}Z form factors receive large corrections (of order 5-10%) in certain models of dynamical electroweak symmetry breaking [1]. At future colliders such as the LHC and the ILC, we will be able to pursue a program of precision top physics, similar to the program studying the Z at LEP and SLC. In this manuscript, they study the corrections to the top quark properties in ''Little Higgs'' models of electroweak symmetry breaking [2], and compare the expected deviations from the SM predictions with expected sensitivities of experiments at the LHC and the ILC. In the Little Higgs models, electroweak symmetry is driven by the radiative effects from the top sector, including the SM-like top and its heavy counterpart, a TeV-scale ''heavy top'' T. Probing this structure experimentally is quite difficult. While the LHC should be able to discover the T quark, its potential for studying its couplings is limited [3,4]. Direct production of the T will likely be beyond the kinematic reach of the ILC. However, we will show below that the corrections to the gauge couplings of the SM top, induced by its mixing with the T, will be observable at the ILC throughout the parameter range consistent with naturalness. Measuring these corrections will provide a unique window on the top sector of the Little Higgs. Many Little Higgs models have been proposed in the literature. We will consider two examples in this study, the ''Littlest Higgs'' model [5], and its

  13. Fact #651: November 29, 2010 Hybrid Vehicles Dominate EPA's Top...

    Energy.gov [DOE] (indexed site)

    Each year, the Environmental Protection Agency (EPA) produces a list of the top ten most ... Top Ten EPA-Rated Fuel Sippers (2011) Chart of top ten EPA-Rated Fuel Sippers (2011). ...

  14. Americas_Next_Top_Energy_Innovator_Fact_Sheet.pdf | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    AmericasNextTopEnergyInnovatorFactSheet.pdf AmericasNextTopEnergyInnovatorFactSheet.pdf PDF icon AmericasNextTopEnergyInnovatorFactSheet.pdf More Documents & ...

  15. Buried and Encapsulated Ducts - Building America Top Innovation...

    Energy.gov [DOE] (indexed site)

    method suitable for both new and existing homes that won a 2013 Top Innovation award. ... Learn more about this Top Innovation. See an example of this Top Innovation in action. ...

  16. Top anti-top forward-backward asymmetry in the economical 331 model

    SciTech Connect

    Mekahlia, A.; Mebarki, N.; Haouchine, M.

    2012-06-27

    Within the economical 331 model the top-antitop asymmetry at the Tevatron where the quark-antiquark annihilation subprocess dominates is calculated. The results are also discussed.

  17. Technology for fabrication of a micromagnet on a tip of a MFM/MRFM probe

    DOEpatents

    Pelekhov, Denis V.; Hammel, P. Chris; Nunes, Jr., Geoffrey; Midzor, Melissa M.; Roukes, Michael

    2004-01-13

    A method for coating the tip of a mechanical resonator for use in magnetic force microscopy and magnetic resonance force microscopy in which the tip is coated with a ferromagnetic material and the cantilever is not, and the product resulting from the method. A cantilever and incorporated tip are coated with a photoresist, except that surface tension keeps photoresist off the tip. The cantilever and tip are then coated with a magnetic material. Next, acetone is used to lift off the magnetic material from the cantilever but not from the tip.

  18. Building America Top Innovations Hall of Fame Profile - Building...

    Energy Saver

    Building America Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) Building America Top Innovations Hall of Fame Profile - Building Energy...

  19. HVAC Cabinet Air Leakage Test Method - Building America Top Innovation...

    Energy Saver

    HVAC Cabinet Air Leakage Test Method - Building America Top Innovation HVAC Cabinet Air Leakage Test Method - Building America Top Innovation While HVAC installers have improved ...

  20. Cyclotron Road: Creating a Home for Top Clean Energy Technology...

    Energy Saver

    Cyclotron Road: Creating a Home for Top Clean Energy Technology Entrepreneurs within our National Laboratories Cyclotron Road: Creating a Home for Top Clean Energy Technology ...

  1. Measurement of cross section of quark pair production top with...

    Office of Scientific and Technical Information (OSTI)

    Measurement of cross section of quark pair production top with the D0 experiment at the Tevatron and determination the top quark mass using this measure Citation Details ...

  2. High-Efficiency Window Air Conditioners - Building America Top...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    High-Efficiency Window Air Conditioners - Building America Top Innovation High-Efficiency Window Air Conditioners - Building America Top Innovation This photo shows a window air ...

  3. Final Reports on the Top Runner Target Product Standards (Japan...

    OpenEI (Open Energy Information) [EERE & EIA]

    Reports on the Top Runner Target Product Standards (Japan) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Final Reports on the Top Runner Target Product Standards...

  4. Building America Top Innovations 2014 Profile: California Energy...

    Office of Scientific and Technical Information (OSTI)

    Selection This 2014 Top Innovation profile describes Building America research on ... Country of Publication: United States Language: English Subject: Building America; top ...

  5. Spring Forward: Top Strategies for Growing and Scaling Your Program...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Spring Forward: Top Strategies for Growing and Scaling Your Program (301) Spring Forward: Top Strategies for Growing and Scaling Your Program (301) May 2

  6. GE China Technology Center Wins Top 12 Most Innovative Practices...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    China Technology Center Wins Top 12 Most Innovative Practices Award of "Multinational ... GE China Technology Center Wins Top 12 Most Innovative Practices Award of "Multinational ...

  7. Bullseye: Top Strategies for Targeted Marketing (101) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bullseye: Top Strategies for Targeted Marketing (101) Bullseye: Top Strategies for Targeted Marketing (101) May 12, 2016 1:00PM to 2:3

  8. Top Green Energy Technologies Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Green Energy Technologies Inc Jump to: navigation, search Name: Top Green Energy Technologies Inc Place: Jhunan, Taiwan Zip: 350 Sector: Solar Product: Top Green is a manufacturer...

  9. Top of the World (Siemens) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Siemens) Jump to: navigation, search Name Top of the World (Siemens) Facility Top of the World (Siemens) Sector Wind energy Facility Type Commercial Scale Wind Facility Status In...

  10. Exterior Rigid Insulation Best Practices - Building America Top...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Exterior Rigid Insulation Best Practices - Building America Top Innovation Exterior Rigid Insulation Best Practices - Building America Top Innovation Effec guid-exterior rigid ...

  11. Quality Management System Guidelines - Building America Top Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Quality management tools tailored for the high performance homebuilding industry provide ... View other Top Innovations in the Effective Guidance and Tools category. Top Innovation - ...

  12. Effective Guidance and Tools - Building America Top Innovations...

    Energy Saver

    Effective Guidance and Tools - Building America Top Innovations Effective Guidance and Tools - Building America Top Innovations August 25, 2014 - 11:00am Addthis Effective Guidance ...

  13. DOE Announces Webinars on Top Solar Tools, Building Energy Optimizatio...

    Office of Environmental Management (EM)

    Top Solar Tools, Building Energy Optimization Tool Training, and More DOE Announces Webinars on Top Solar Tools, Building Energy Optimization Tool Training, and More May 8, 2014 - ...

  14. Building Science-Based Climate Maps - Building America Top Innovation...

    Energy Saver

    Building Science-Based Climate Maps - Building America Top Innovation Building Science-Based Climate Maps - Building America Top Innovation Photo showing climate zone maps based on ...

  15. Deputy Energy Secretary Sherwood-Randall Highlights a Top Budget...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Deputy Energy Secretary Sherwood-Randall Highlights a Top Budget Priority in Texas Deputy Energy Secretary Sherwood-Randall Highlights a Top Budget Priority in Texas February 3,...

  16. Top quark pair production cross section at Tevatron (Conference...

    Office of Scientific and Technical Information (OSTI)

    Conference: Top quark pair production cross section at Tevatron Citation Details In-Document Search Title: Top quark pair production cross section at Tevatron You are accessing ...

  17. Feynman Center for Innovation honors top technical trailblazers

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Feynman Center honors top technical trailblazers Feynman Center for Innovation honors top technical trailblazers Gary Grider received the 2015 Richard P. Feynman Innovation Prize for ...

  18. Outside Air Ventilation Controller - Building America Top Innovation...

    Office of Environmental Management (EM)

    Outside Air Ventilation Controller - Building America Top Innovation Outside Air Ventilation Controller - Building America Top Innovation This photo shows a two-story house with ...

  19. Unvented Crawlspace Code Adoption - Building America Top Innovation...

    Energy Saver

    Unvented Crawlspace Code Adoption - Building America Top Innovation Unvented Crawlspace Code Adoption - Building America Top Innovation Photo of an unvented and insulated ...

  20. Advanced Framing Systems and Packages - Building America Top...

    Energy Saver

    Advanced Framing Systems and Packages - Building America Top Innovation Advanced Framing Systems and Packages - Building America Top Innovation This photo shows advanced framing ...

  1. Feynman Center for Innovation honors top technical trailblazers

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Feynman Center honors top technical trailblazers Feynman Center for Innovation honors top ... Gary Grider (second from right) with the 2015 Richard P. Feynman Innovation Prize. Also ...

  2. Tankless Gas Water Heater Performance - Building America Top...

    Energy Saver

    Tankless Gas Water Heater Performance - Building America Top Innovation Tankless Gas Water Heater Performance - Building America Top Innovation This photo shows a hot water heater ...

  3. Water Management Guide - Building America Top Innovation | Department...

    Energy Saver

    Water Management Guide - Building America Top Innovation Water Management Guide - Building America Top Innovation Cover of the EEBA Water Management Guide. As energy codes and ...

  4. America Chooses the Next Top Energy Innovator | Department of...

    Energy.gov [DOE] (indexed site)

    The Americas Next Top Energy Innovator Challenge makes inventions and technologies ... The America's Next Top Energy Innovator Challenge makes inventions and technologies ...

  5. Attic Air Sealing Guide - Building America Top Innovation | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Attic Air Sealing Guide - Building America Top Innovation Attic Air Sealing Guide - Building America Top Innovation Image showing step-by-step instructions for air sealing. One of ...

  6. Towards the Top with D0

    SciTech Connect

    Deliot, Frederic

    2012-01-01

    The plan of this manuscript follows my research path over the past 10 years: the muon identification and common analysis tools at DØ, the measurement of the inclusive production of W boson decaying into muon and top quark studies. In the first section, I describe my work about muon identification, certification of the standard muon identification criteria, measurement of the muon selection efficiency and about the development of common analysis format and tools. In the second section, I explain how these efficiency measurements can be used to measure the inclusive W boson production cross section in the muon channel. The W ! μν cross section measurement can be seen as a standard candle to establish several analysis pieces that have to be put in place to perform more complex measurements like top quark analyses. In the last section I introduce more extensively the top quark physics at the Tevatron and describe in more details the main analyses in the dilepton channel I was involved in: the measurement of the tt inclusive cross section in the dilepton channel as well as the ratio of cross sections, the measurement of the top quark mass in the dilepton channel, the extraction of the mass from the tt cross section and the Tevatron top quark mass combination. Before concluding, I finish the section with the description of the latest results on the tt charge asymmetry both at the Tevatron and at the LHC.

  7. A measurement of the top quark's charge

    SciTech Connect

    Unalan, Zeynep Gunay; /Michigan State U.

    2007-11-01

    The top quark was discovered in 1995 at the Fermilab National Accelerator Laboratory (Fermilab). One way to confirm if the observed top quark is really the top quark posited in the Standard Model (SM) is to measure its electric charge. In the Standard Model the top quark is the isospin partner of the bottom quark and is expected to have a charge of +2/3. However, an alternative 'exotic' model has been proposed with a fourth generation exotic quark that has the same characteristics, such as mass, as our observed top but with a charge of -4/3. This thesis presents the first CDF measurement of the top quark's charge via its decay products, a W boson and a bottom quark, using {approx} 1 fb{sup -1} of data. The data were collected by the CDF detector from proton anti-proton (p{bar p}) collisions at {radical}s = 1.96 TeV at Fermilab. We classify events depending on the charges of the bottom quark and associated W boson and count the number of events which appear 'SM-like' or 'exotic-like' with a SM-like event decaying as t {yields} W{sup +}b and an exotic event as t {yields} W{sup -}b. We find the p-value under the Standard Model hypothesis to be 0:35 which is consistent with the Standard Model. We exclude the exotic quark hypothesis at an 81% confidence level, for which we have chosen a priori that the probability of incorrectly rejecting the SM would be 1%. The calculated Bayes Factor (BF) is 2 x Ln(BF)=8.54 which is interpreted as the data strongly favors the Standard Model over the exotic quark hypothesis.

  8. Tips: Smart Meters and a Smarter Power Grid | Department of Energy

    Office of Environmental Management (EM)

    Tips: Smart Meters and a Smarter Power Grid Tips: Smart Meters and a Smarter Power Grid The Smart Grid will consist of controls, computers, automation, and new technologies and...

  9. BioenergizeME Office Hours Webinar: Must-Know Tips for the 2016...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    BioenergizeME Office Hours Webinar: Must-Know Tips for the 2016 BioenergizeME Infographic Challenge BioenergizeME Office Hours Webinar: Must-Know Tips for the 2016 BioenergizeME ...

  10. #tipsEnergy: Ways to Save on Electricity Costs | Department of...

    Energy.gov [DOE] (indexed site)

    Electricity Costs Every month we ask you to share your energy-saving tips, and we feature ... For this month's tipsEnergy, we want to know how you save on electricity costs. Storified ...

  11. Ammonia Sensors Based on Doped-Sol-Gel-Tipped Optical Fibers...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sensors Based on Doped-Sol-Gel-Tipped Optical Fibers for Catalyst System Diagnostics Ammonia Sensors Based on Doped-Sol-Gel-Tipped Optical Fibers for Catalyst System Diagnostics ...

  12. NREL Researcher is Top World Physicist

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    is Top World Physicist For more information contact: Kerry Masson, (303) 275-4083 e:mail: kerry_masson@nrel.gov Golden, Colo., March 17, 1998 — Dr. Alex Zunger, Institute Research Fellow at the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL), has been ranked as one of the top physicists in the world by the Institute of Scientific Information (ISI). The standing is based on the number of times his research has been cited by fellow scientists. Of the 517,111

  13. TOP500 Supercomputers for November 2003

    SciTech Connect

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2003-11-16

    22nd Edition of TOP500 List of World s Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.; BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 22nd edition of the TOP500 list of the worlds fastest supercomputers was released today (November 16, 2003). The Earth Simulator supercomputer retains the number one position with its Linpack benchmark performance of 35.86 Tflop/s (''teraflops'' or trillions of calculations per second). It was built by NEC and installed last year at the Earth Simulator Center in Yokohama, Japan.

  14. Evidence for production of single top quarks

    SciTech Connect

    Abazov, V.M.; Abbott, B.; Abolins, M.; Acharya, B.S.; Adams, M.; Adams, T.; Aguilo, E.; Ahn, S.H.; Ahsan, M.; Alexeev, G.D.; Alkhazov, G.; /St. Petersburg, INP /Michigan U.

    2008-03-01

    We present first evidence for the production of single top quarks in the D0 detector at the Fermilab Tevatron p{bar p} collider. The standard model predicts that the electroweak interaction can produce a top quark together with an antibottom quark or light quark, without the antiparticle top quark partner that is always produced from strong coupling processes. Top quarks were first observed in pair production in 1995, and since then, single top quark production has been searched for in ever larger datasets. In this analysis, we select events from a 0.9 fb{sup -1} dataset that have an electron or muon and missing transverse energy from the decay of a W boson from the top quark decay, and two, three, or four jets, with one or two of the jets identified as originating from a b hadron decay. The selected events are mostly backgrounds such as W+jets and t{bar t} events, which we separate from the expected signals using three multivariate analysis techniques: boosted decision trees, Bayesian neural networks, and matrix element calculations. A binned likelihood fit of the signal cross section plus background to the data from the combination of the results from the three analysis methods gives a cross section for single top quark production of {sigma}(p{bar p} {yields} tb + X, tqb + X) = 4.7 {+-} 1.3 pb. The probability to measure a cross section at this value or higher in the absence of signal is 0.014%, corresponding to a 3.6 standard deviation significance. The measured cross section value is compatible at the 10% level with the standard model prediction for electroweak top quark production. We use the cross section measurement to directly determine the Cabibbo-Kobayashi-Maskawa quark mixing matrix element that describes the Wtb coupling and find |V{sub tb}f{sub 1}{sup L}| = 1.31{sub -0.21}{sup +0.25}, where f{sub 1}{sup L} is a generic vector coupling. This model-independent measurement translates into 0.68 < |V{sub tb}| {le} 1 at the 95% C.L. in the standard model.

  15. Top and Electroweak Measurements at the Tevatron

    SciTech Connect

    Bartos, P.

    2016-01-01

    In this report, we summarize the latest results of the top-quark mass and electroweak measurements from the Tevatron. Since the world combination of top-quark mass measurements was done, CDF and D0 experiments improved the precision of several results. Some of them reach the relative precition below 1% for a single measurement. From the electroweak results, we report on the WW and WZ production cross section, measurements of the weak mixing angle and indirect measurements of W boson mass. The Tevatron results of the weak mixing angle are still the most precise ones of hadron colliders.

  16. Top Quark Spin Correlations at the Tevatron

    SciTech Connect

    Head, Tim; /Manchester U.

    2010-07-01

    Recent measurements of the correlation between the spin of the top and the spin of the anti-top quark produced in proton anti-proton scattering at a center of mass energy of {radical}s = 1.96 Tev by the CDF and D0 collaborations are discussed. using up to 4.3 fb{sup -1} of data taken with the CDF and D0 detectors the spin correlation parameter C, the degree to which the spins are correlated, is measured in dileptonic and semileptonic final states. The measurements are found to be in agreement with Standard Model predictions.

  17. Turmoil at the Top of the World

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Turmoil at the Top of the World 1663 Los Alamos science and technology magazine Latest Issue:July 2016 past issues All Issues » submit Turmoil at the Top of the World The Arctic tundra is being drained and dried by the warming climate. July 21, 2016 arctic tundra signature pattern of polygons The Arctic tundra has a signature pattern of polygons due to complex interactions between soil and water-interactions that are being disrupted by the warming climate. "It's exciting but also scary. I

  18. Studies of top quark properties and search for electroweak single top quark production at the Tevatron

    SciTech Connect

    Datta, Mousumi; /Fermilab

    2007-10-01

    The top quark was discovered in 1995 by the CDF and D0 experiments at the Fermilab Tevatron during the Run I operation. Since the start of the Tevatron Run II in 2001, both experiments have collected {approx}2 fb{sup -1} data samples, which are over twenty times larger than that used in the Run 1 discovery. This larger data sample allows more precise studies of top-quark properties; differences between observed top-quark properties and the Standard Model (SM) prediction may give hints to possible physics beyond the SM. Here we present the latest results on the measurements of top-quark properties and the search for electroweak (EW) single top quark production from the CDF and D0 collaborations. The integrated luminosity used for the measurements corresponds to about 1 fb{sup -1}.

  19. Select an Energy-Efficient Centrifugal Pump - Pumping System Tip Sheet #3

    SciTech Connect

    2005-10-01

    BestPractices Program tip sheet discussing pumping system efficiency by selecting an energy-efficient centrifugal pump.

  20. Determining the Right Air Quality for Your Compressed Air System - Compressed Air Tip Sheet #5

    SciTech Connect

    2004-08-01

    BestPractices Program tip sheet discussing how to determine the right air quality for compressed air systems.

  1. Reduce Pumping Costs Through Optimum Pipe Sizing - Pumping Systems Tips Sheet #9

    SciTech Connect

    2005-10-01

    BestPractices Program tip sheet discussing pumping system efficiency by reducing pumping costs through optimum pipe sizing.

  2. Figure 2 (top).gif | OSTI, US Dept of Energy Office of Scientific and

    Office of Scientific and Technical Information (OSTI)

    Technical Information (top).gif

  3. Vehicle Technologies Program: Goals, Strategies, and Top Accomplishments (Brochure)

    SciTech Connect

    Not Available

    2010-12-01

    Fact sheet describes the Vehicle Technologies Program and its goals, strategies and top accomplishments.

  4. Materials Technologies: Goals, Strategies, and Top Accomplishments (Brochure)

    SciTech Connect

    Not Available

    2010-08-01

    Document details the goals, strategies, and top accomplishments of DOE's Materials Technologies subprogram.

  5. Removable inner turbine shell with bucket tip clearance control

    DOEpatents

    Sexton, Brendan F.; Knuijt, Hans M.; Eldrid, Sacheverel Q.; Myers, Albert; Coneybeer, Kyle E.; Johnson, David Martin; Kellock, Iain R.

    2000-01-01

    A turbine includes a plurality of inner shell sections mounting first and second stage nozzle and shroud portions. The inner shell sections are pinned to an outer containment shell formed of sections to preclude circumferential movement of the inner shell relative to the outer shell and enable thermal expansion and contraction of the inner shell relative to the outer shell. Positive bucket tip clearance control is afforded by passing a thermal medium about the inner shell in heat transfer relation with the shrouds about the first and second stage bucket tips, the thermal medium being provided from a source of heating/cooling fluid independent of the turbine. Access is provided to the rotor and turbine buckets by removing the outer and inner shell sections.

  6. Multi-tipped optical component - Energy Innovation Portal

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    7 Site Map Printable Version Share this resource About Search Categories (15) Advanced Materials Biomass and Biofuels Building Energy Efficiency Electricity Transmission Energy Analysis Energy Storage Geothermal Hydrogen and Fuel Cell Hydropower, Wave and Tidal Industrial Technologies Solar Photovoltaic Solar Thermal Startup America Vehicles and Fuels Wind Energy Partners (27) Visual Patent Search Success Stories Find More Like This Return to Search Multi-tipped optical component United States

  7. Tips for Planning, Building, and Testing a Model Car

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tips for Planning, Building, and Testing Your Lithium- Ion Battery Powered Car CONTENTS:  Teacher Overview  What Teachers Can Do To Help  Student Design Plan  Brainstorming  Materials  Chassis Design  Transmission  Gear Ratio  Wheels and Bearings  Battery  Testing  Trouble Shooting TEACHER OVERVIEW  The Lithium-ion battery powered car competition is designed to be an engineering challenge for middle school students.  Students will be exploring the

  8. Careers - Tips - U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update

    Application Tips & Contacts Understanding EIA's Job Announcements Federal job announcements, including EIA's, can be a little confusing to applicants who aren't used to reading them, but it's worth the effort! These announcements provide important information about qualifications, duties, salary, duty location, and benefits. Each job vacancy consists of a job title, the career path, the series number and the pay band number. For example, in the "Economist, GS-0110-04" citation:

  9. Photovoltaics R&D: At the Tipping Point

    SciTech Connect

    Kazmerski, L. L.

    2005-01-01

    '' . . . with robust investments in research and market development, the picture changes dramatically.'' Thus, the realigned U.S. Photovoltaic Industry Roadmap highlights R&D as critical to the tipping point that will make solar photovoltaics (PV) significant in the U.S. energy portfolio--part of a well-designed plan that would bring ''2034 expectations'' to reality by 2020. Technology improvement and introduction depend on key, focused, and pertinent research contributions that range from the most fundamental through the applied. In this paper, we underscore the successes and relevance of our current systems-driven PV R&D programs, which are built on integrated capabilities. These capabilities span atomic-level characterization, nanotechnology, new materials design, interface and device engineering, theoretical guidance and modeling, processing, measurements and analysis, and process integration. This presentation identifies and provides examples of critical research tipping points needed to foster now and near technologies (primarily crystalline silicon and thin films) and to introduce coming generations of solar PV that provide options to push us to the next performance levels (devices with ultra-high efficiencies and with ultra-low cost). The serious importance of science and creativity to U.S. PV technology ownership--and the increased focus to accelerate the time from laboratory discovery to industry adoption--are emphasized at this ''tipping point'' for solar PV.

  10. Recent Results of Top Quark Physics from the Tevatron

    SciTech Connect

    Peters, R. Y.

    2015-07-09

    Twenty years after its discovery in 1995 by the CDF and D0 collaborations at the Tevatron proton-antiproton collider at Fermilab, the top quark still undergoes intensive studies at the Tevatron and the LHC at CERN. In this article, recent top quark physics results from CDF and D0 are reported. In particular, measurements of single top quark and double top quark production, the $t\\bar{t}$ forward-backward asymmetry and the top quark mass are discussed.

  11. Building America Top Innovations Hall of Fame Profile - Building

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    America's Top Innovations Propel the Home Building Industry toward Higher Performance | Department of Energy Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance Building America Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance This Building America Innovations profile describes the concept for the U.S. Department of Energy

  12. What Are Your Favorite Winter Energy Savings Tips? | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Are Your Favorite Winter Energy Savings Tips? What Are Your Favorite Winter Energy Savings Tips? January 27, 2012 - 10:06am Addthis This week, Amanda highlighted the Energy Savers seasonal website as a great place to get tips to save money and energy in any season. We want to know which winter energy savings tips you've tried. Have you covered your drafty windows, added weatherstripping to your doors, or opened your south-facing window curtains during the day? How well have these tips worked for

  13. Check Heat Transfer Services; Industrial Technologies Program (ITP) Energy Tips - Process Heating Tip Sheet #4 (Fact Sheet).

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4 * September 2005 Industrial Technologies Program Check Heat Transfer Surfaces Industrial process heating systems use various methods to transfer heat to the load. These include direct heat transfer from the flame or heated gases to the load and indirect heat transfer from radiant tubes, muffles, or heat exchangers. Indirect heating systems that use fuel firing, steam, or hot liquids to supply heat are discussed in this tip sheet. In each case, clean heat transfer surfaces can improve system

  14. Operating a blast furnace using dried top gas

    SciTech Connect

    Kundrat, D.M.

    1993-08-10

    A method is described of operating a blast furnace, comprising: introducing into the top of the furnace a charge containing metal oxide, coke and flux, collecting a top gas CO, H[sub 2], carbon dioxide and water from the furnace, increasing the reducing potential of said collected top gas by removing water but without removing carbon dioxide from at least a portion of said collected top gas thereby forming a dried top gas, heating said dried top gas to form a heated dried top gas, introducing said heated dried top gas into the lower half of the stack of the furnace at a position above which said coke is not reactive and introducing an oxygen-containing gas and a hydrogenaceous fuel into the bosh of the furnace whereby said metal oxide is reduced to a molten metal using said heated dried top gas.

  15. The heavy top quark and supersymmetry

    SciTech Connect

    Hall, L.J.

    1997-01-01

    Three aspects of supersymmetric theories are discussed: electroweak symmetry breaking, the issues of flavor, and gauge unification. The heavy top quark plays an important, sometimes dominant, role in each case. Additional symmetries lead to extensions of the Standard Model which can provide an understanding for many of the outstanding problems of particle physics. A broken supersymmetric extension of spacetime allows electroweak symmetry breaking to follow from the dynamics of the heavy top quark; an extension of isospin provides a constrained framework for understanding the pattern of quark and lepton masses; and a grand unified extension of the Standard Model gauge group provides an elegant understanding of the gauge quantum numbers of the components of a generation. Experimental signatures for each of these additional symmetries are discussed.

  16. Top quark and electroweak results from CDF

    SciTech Connect

    Sandra Leone

    2003-11-04

    In 2001 the Tevatron run II began, after a five year period of significant upgrade of the accelerator itself and of the experiments CDF and D0. After a detector commissioning run, the CDF experiment is now taking high quality data with all subsystems functional. We report in this talk the first preliminary CDF results on top quark and W/Z boson properties, based on run II data. The top quark, discovered in 1995 at the Tevatron, has proven to be a very interesting particle. Its properties allow to perform stringent tests of the Standard Model (SM) and to search for new physics through a deviation from SM predictions. We give here some expectations of what Tevatron run II will ultimately provide to our understanding of matter.

  17. NREL'S Zunger Receives Top Scientific Honors

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Top Scientific Honors For more information contact: Gary Schmitz, 303-275-4050 email: Gary Schmitz Golden, Colo., Nov. 29, 2000 - Alex Zunger, a physicist and research fellow at the U.S. Department of Energy's National Renewable Energy Laboratory, has been named the 2001 recipient of the prestigious Rahman Award by the American Physical Society (APS). The award from the APS is bestowed once annually to an individual for "outstanding achievement in computational physics research."

  18. 2016 Top Markets Report Renewable Fuels

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Assessment Tool for Focusing U.S. Government Resources 2016 Top Markets Report U.S. Department of Commerce International Trade Administration Industry & Analysis (I&A) U.S. Department of Commerce International Trade Administration Industry & Analysis (I&A) Renewable Fuels July 13, 2015 Bioenergy 2016 Washington, DC International Trade Administration - Industry & Analysis (I&A) 2 Presentation Outline USG Programs and Services for Bioenergy Exporters  The International

  19. Rare top quark decays in extended models

    SciTech Connect

    Gaitan, R.; Miranda, O. G.; Cabral-Rosetti, L. G.

    2006-09-25

    Flavor changing neutral currents (FCNC) decays t {yields} H0 + c, t {yields} Z + c, and H0 {yields} t + c-bar are discussed in the context of Alternative Left-Right symmetric Models (ALRM) with extra isosinglet heavy fermions where FCNC decays may take place at tree-level and are only suppressed by the mixing between ordinary top and charm quarks, which is poorly constraint by current experimental values. The non-manifest case is also briefly discussed.

  20. Tracking down hyper-boosted top quarks

    DOE PAGES [OSTI]

    Larkoski, Andrew J.; Maltoni, Fabio; Selvaggi, Michele

    2015-06-05

    The identification of hadronically decaying heavy states, such as vector bosons, the Higgs, or the top quark, produced with large transverse boosts has been and will continue to be a central focus of the jet physics program at the Large Hadron Collider (LHC). At a future hadron collider working at an order-of-magnitude larger energy than the LHC, these heavy states would be easily produced with transverse boosts of several TeV. At these energies, their decay products will be separated by angular scales comparable to individual calorimeter cells, making the current jet substructure identification techniques for hadronic decay modes not directlymore » employable. In addition, at the high energy and luminosity projected at a future hadron collider, there will be numerous sources for contamination including initial- and final-state radiation, underlying event, or pile-up which must be mitigated. We propose a simple strategy to tag such "hyper-boosted" objects that defines jets with radii that scale inversely proportional to their transverse boost and combines the standard calorimetric information with charged track-based observables. By means of a fast detector simulation, we apply it to top quark identification and demonstrate that our method efficiently discriminates hadronically decaying top quarks from light QCD jets up to transverse boosts of 20 TeV. Lastly, our results open the way to tagging heavy objects with energies in the multi-TeV range at present and future hadron colliders.« less

  1. Observation of Single Top Quark Production

    SciTech Connect

    Gerber, Cecilia E.; /Illinois U., Chicago

    2009-09-01

    The author reports on the observation of electroweak production of single top quarks in p{bar p} collisions at {radical}s = 1.96 Tev using 2.3 fb{sup -1} of data collected with the D0 detector at the fermilab Tevatron Collider. Using events containing an isolated electron or muon, missing transverse energy, two, three or four jets, with one or two of them identified as originating from the fragmentation of a b quark, the measured cross section for the process p{bar p} {yields} tb + X, tqb + X is 3.94 {+-} 0.88 pb (for a top quark mass of 170 GeV). the probability to measure a cross section at this value or higher in the absence of signal is 2.5 x 10{sup -7}, corresponding to a 5.0 standard deviation significance. Using the same dataset, the measured cross sections for the t- and the s-channel processes when determined simultaneously with no assumption on their relative production rate are 3.14{sub -0.80}{sup +0.94} pb and 1.05 {+-} 0.81 pb respectively, consistent with standard model expectations. The measured t-channel cross section has a significance of 4.8 standard deviations, representing the first evidence for the production of an individual single top process to be detected.

  2. Dark decay of the top quark

    DOE PAGES [OSTI]

    Kong, Kyoungchul; Lee, Hye -Sung; Park, Myeonghun

    2014-04-01

    We suggest top quark decays as a venue to search for light dark force carriers. Top quark is the heaviest particle in the standard model whose decays are relatively poorly measured, allowing sufficient room for exotic decay modes from new physics. A very light (GeV scale) dark gauge boson (Z') is a recently highlighted hypothetical particle that can address some astrophysical anomalies as well as the 3.6 σ deviation in the muon g-2 measurement. We present and study a possible scenario that top quark decays as t → b W + Z's. This is the same as the dominant topmore » quark decay (t → b W) accompanied by one or multiple dark force carriers. The Z' can be easily boosted, and it can decay into highly collimated leptons (lepton-jet) with large branching ratio. In addition, we discuss the implications for the Large Hadron Collider experiments including the analysis based on the lepton-jets.« less

  3. Tracking down hyper-boosted top quarks

    SciTech Connect

    Larkoski, Andrew J.; Maltoni, Fabio; Selvaggi, Michele

    2015-06-05

    The identification of hadronically decaying heavy states, such as vector bosons, the Higgs, or the top quark, produced with large transverse boosts has been and will continue to be a central focus of the jet physics program at the Large Hadron Collider (LHC). At a future hadron collider working at an order-of-magnitude larger energy than the LHC, these heavy states would be easily produced with transverse boosts of several TeV. At these energies, their decay products will be separated by angular scales comparable to individual calorimeter cells, making the current jet substructure identification techniques for hadronic decay modes not directly employable. In addition, at the high energy and luminosity projected at a future hadron collider, there will be numerous sources for contamination including initial- and final-state radiation, underlying event, or pile-up which must be mitigated. We propose a simple strategy to tag such "hyper-boosted" objects that defines jets with radii that scale inversely proportional to their transverse boost and combines the standard calorimetric information with charged track-based observables. By means of a fast detector simulation, we apply it to top quark identification and demonstrate that our method efficiently discriminates hadronically decaying top quarks from light QCD jets up to transverse boosts of 20 TeV. Lastly, our results open the way to tagging heavy objects with energies in the multi-TeV range at present and future hadron colliders.

  4. ScienceDMZ-TIP2013-tierney.v4.pptx

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Achieving the Science DMZ Eli Dart, Brian Tierney and Eric Pouyoul, ESnet Raj Kettimuthu, ANL Jason Zurawski, Internet2 Guy Almes: Texas A&M TIP2013, Honolulu Hawaii, January, 2013 Lawrence Berkeley National Laboratory U.S. Department of Energy | Office of Science Section 2: Bulk Data Transfer Tools and Data Transfer Nodes 2 1/29/12 Lawrence Berkeley National Laboratory U.S. Department of Energy | Office of Science Section Outline Designing and Building a Data Transfer Nodes * DTN Hardware

  5. Method of making tapered capillary tips with constant inner diameters

    DOEpatents

    Kelly, Ryan T. (West Richland, WA); Page, Jason S. (Kennewick, WA); Tang, Keqi (Richland, WA); Smith, Richard D. (Richland, WA)

    2009-02-17

    Methods of forming electrospray ionization emitter tips are disclosed herein. In one embodiment, an end portion of a capillary tube can be immersed into an etchant, wherein the etchant forms a concave meniscus on the outer surface of the capillary. Variable etching rates in the meniscus can cause an external taper to form. While etching the outer surface of the capillary wall, a fluid can be flowed through the interior of the capillary tube. Etching continues until the immersed portion of the capillary tube is completely etched away.

  6. DIRECTIONS AND TIPS FOR USING INTEGRITY Accessing Integrity:

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DIRECTIONS AND TIPS FOR USING INTEGRITY Accessing Integrity: The website address for Integrity is www.integrity.gov. When you get to the website, click on the yellow box labeled "Login to Integrity." Integrity is connected to the OMB MAX Central Authentication Service. Employees who have previously used OMB MAX should use their MAX user ID and password. Do not use the CIC or PIV login option. This is not enabled for DOE Integrity filers. If you used Integrity last year, you have an OMB

  7. Tips & Tricks for Uploading Images with Research Highlights

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    & Tricks for Uploading Images with Research Highlights Images: (optional) Only images in JPEG, BMP, GIF, or PNG can be accepted up to 10 Mb. The image caption is limited to 500 characters. Tip: For comparisons, lay multiple images out side by side, vertically or in a grid formation to create a single image file for uploading on the Research Highlight Submittal Form. Trick: If image editing soft ware is unavailable, the task can be accomplished using Microsoft (MS) Word as follows: 1. Insert

  8. Junior Solar Sprint Inside Tips on Parts and Construction

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NREL/BK-820-30827 Revised 8/23/01 Inside Tips on Parts and Construction Written by: Robert Haehnel 2 Parts is Parts: So you are ready to build the ultimate JSS car. You have the perfect design, and the ultimate gear ratio and tire size combination. But you just visited every hobby store in the Upper Valley and could not find a single gear or pulley that would fit your motor. Now what do you do? It is time to cannibalize! The best place to find gears and pulleys of all different sizes is in old

  9. Measurement of cross section of quark pair production top with...

    Office of Scientific and Technical Information (OSTI)

    cross section of quark pair production top with the D0 experiment at the Tevatron and determination the top quark mass using this measure Citation Details In-Document Search Title: ...

  10. Advanced Technologies and Practices - Building America Top Innovations...

    Office of Environmental Management (EM)

    These Top Innovations ensure a healthy and non-hazardous building environment. 2014 Top Innovation ASHRAE Standard 62.2. Ventilation and Indoor Air Quality in Low-Rise Residential ...

  11. Measurement of the top quark pair production cross section in...

    Office of Scientific and Technical Information (OSTI)

    Measurement of the top quark pair production cross section in proton-proton collisions at sqrts13 TeV Citation Details In-Document Search Title: Measurement of the top quark...

  12. The Business Case for Fuel Cells 2011: Energizing America's Top...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Business Case for Fuel Cells 2011: Energizing America's Top Companies This report ... The Business Case for Fuel Cells 2011: Energizing America's Top Companies (2.22 MB) More ...

  13. Top of the World (GE) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    GE) Jump to: navigation, search Name Top of the World (GE) Facility Top of the World (GE) Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner...

  14. Prof. Robinson named as an emerging top scientist in Materials...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Robinson named as an emerging top scientist in Materials Chemistry April 23rd, 2014 ... Boards of the Journal of Materials Chemistry A as one of the emerging top scientists ...

  15. Satellite Television Industry Meeting Regarding DOE Set-Top Box...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking On April 3, 2012 at 11:00 AM, ...

  16. Los Alamos National Laboratory again top contributor to United...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Top contributor to United Way ff Santa Fe County Los Alamos National Laboratory again top contributor to United Way of Santa Fe County Laboratory employees and Los Alamos National...

  17. Building America Top Innovations 2013 Profile - Zero Energy-Ready...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building America Top Innovations 2013 Profile - Zero Energy-Ready Single-Family Homes Building America Top Innovations 2013 Profile - Zero Energy-Ready Single-Family Homes Many ...

  18. Electroweak and QCD corrections to top-pair hadroproduction in...

    Office of Scientific and Technical Information (OSTI)

    Electroweak and QCD corrections to top-pair hadroproduction in association with heavy bosons Citation Details In-Document Search Title: Electroweak and QCD corrections to top-pair ...

  19. Wind Energy Program: Top 10 Program Accomplishments | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Wind Energy Program: Top 10 Program Accomplishments Wind Energy Program: Top 10 Program Accomplishments Brochure on the top accomplishments of the Wind Energy Program, including the development of large wind machines, small machines for the residential market, wind tunnel testing, computer codes for modeling wind systems, high definition wind maps, and successful collaborations. top_10_wind_accomplishments (1.84 MB) More Documents & Publications Wind Program Accomplishments Wind Power Today,

  20. Advanced Technologies and Practices - Building America Top Innovations |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Advanced Technologies and Practices - Building America Top Innovations Advanced Technologies and Practices - Building America Top Innovations July 16, 2014 - 4:04pm Addthis Advanced Technologies and Practices - Building America Top Innovations Top Innovations in this category encompass research in specific technologies and construction practices that improve the building envelope; heating, ventilation, and air conditioning (HVAC); water heating components; and indoor air

  1. America's Next Top Energy Innovator Challenge | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Innovation » America's Next Top Energy Innovator » America's Next Top Energy Innovator Challenge America's Next Top Energy Innovator Challenge The America's Next Top Energy Innovator Challenge, a part of the Startup America initiative, made it easier for start-ups to use inventions and technology developed at the U.S. Department of Energy's 17 National Laboratories and the Y-12 National Security Complex. The companies highlighted below signed option agreements allowing them to license

  2. Building America Top Innovations 2012: Unvented Crawlspaces Code Adoption

    SciTech Connect

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research which has supported acceptance of unvented crawlspaces in the IRC.

  3. Top ECMs for Labs and Data Centers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top ECMs for Labs and Data Centers Top ECMs for Labs and Data Centers Presentation-given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting-covers the top energy conservation measures (ECMs) laboratories and data centers can apply for energy efficiency and savings. Download the Top ECMs for Labs and Data Centers presentation. (3.34 MB) More Documents & Publications A Sustainable Focus for Laboratory Design, Engineering, and Operation Case Study: Innovative Energy

  4. Announcing the "Top 10" List of Green Utility Leaders

    Energy.gov [DOE]

    Find out if your utility made the National Renewable Energy Laboratory's list of top green power programs.

  5. LANL announces Top 10 science & technology developments of 2010

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2010 top 10 science & technology developments LANL announces Top 10 science & technology developments of 2010 Top 10 developments based on major programmatic milestones, strategic potential, scholarly accounts, and associated news coverage. December 20, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to

  6. LANL announces top 10 science stories of 2009

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Top 10 science stories of 2009 LANL announces top 10 science stories of 2009 Top 10 Laboratory science stories of 2009 based on global viewership of online media content and major programmatic milestones. January 8, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos

  7. Vehicle Technologies Program: Goals, Strategies, and Top Accomplishments

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (Brochure), Vehicle Technologies Program (VTP) | Department of Energy Program: Goals, Strategies, and Top Accomplishments (Brochure), Vehicle Technologies Program (VTP) Vehicle Technologies Program: Goals, Strategies, and Top Accomplishments (Brochure), Vehicle Technologies Program (VTP) vtp_goals-strategies-accomp.pdf (1.41 MB) More Documents & Publications Advanced Combustion Engine R&D: Goals, Strategies, and Top Accomplishments Materials Technologies: Goals, Strategies, and Top

  8. Microstructural examination of fatigue crack tip in high strength steel

    SciTech Connect

    Fukuoka, C.; Yoshizawa, H.; Nakagawa, Y.G. . Research Lab.); Lapides, M.E. )

    1993-10-01

    Fatigue tests were performed to examine how microstructural conditioning influences crack initiation and propagation in SA508 class 3 low-carbon steel. A 3-mm-long crack was introduced in compact tension (CT) fatigue test specimens under four different loads in order to obtain crack tip plastic zones at different stress intensity factor ranges, [Delta]K = 18, 36, 54, and 72 MPa[radical]m. The microstructure of the plastic zones around the crack tip were examined by transmission electron microscopy (TEM) and selected area electron diffraction (SAD). Micro-orientation of the dislocation cells in the plastic zones of all of the CT samples increased to 4 deg from the level of an as-received sample. Four-point bending fatigue tests were performed for plate shape samples with a large cyclic strain range. The SAD value of the bending samples was also 4 deg in the damaged area where cracks already initiated at an early stage of the fatigue process. These test results indicate that the microstructural conditioning is a prerequisite for the fatigue crack initiation and propagation in SA508. These observations may lead to better understanding of how fatigue initiation processes transit to cracks.

  9. Diesel prices top $4 per gallon

    Energy Information Administration (EIA) (indexed site)

    Diesel prices top $4 per gallon The U.S. average retail price for on-highway diesel fuel surpassed the four dollar mark for the first time this year. Prices rose to $4.02 a gallon on Monday. That's up 9 ½ cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Prices were highest in the New England region, at 4.24 a gallon, up 5.6 cents from a week ago. Prices were lowest in the Rocky Mountain States at $3.84 a gallon, up almost 11 cents. This is

  10. Top Event Matrix Analysis Code System.

    Energy Science and Technology Software Center

    2000-06-19

    Version 00 TEMAC is designed to permit the user to easily estimate risk and to perform sensitivity and uncertainty analyses with a Boolean expression such as produced by the SETS computer program. SETS produces a mathematical representation of a fault tree used to model system unavailability. In the terminology of the TEMAC program, such a mathematical representation is referred to as a top event. The analysis of risk involves the estimation of the magnitude ofmore » risk, the sensitivity of risk estimates to base event probabilities and initiating event frequencies, and the quantification of the uncertainty in the risk estimates.« less

  11. Top 10 science stories of the year

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    of Energy Combined Heat and Power Top 10 Things You Didn't Know About Combined Heat and Power October 21, 2013 - 11:25am Addthis Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce harmful emissions. | Infographic by <a href="/node/379579">Sarah Gerrity</a>, Energy Department. Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce

  12. America's Next Top Energy Model: Tools and Best Practices (101) |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy America's Next Top Energy Model: Tools and Best Practices (101) America's Next Top Energy Model: Tools and Best Practices (101) December 1, 2016 1:00PM to 2:30PM EST Please join this Better Buildings Residential Network peer exchange call to see which top energy models will be strutting their stuff down the runway

  13. Effects of self-assembled monolayer and PFPE lubricant on wear characteristics of flat silicon tips.

    SciTech Connect

    Kim, H. J.; Jang, C. E.; Kim, D. E.; Kim, Y. K.; Choa, S. H.; Hong, S.; Materials Science Division; Yonsei Univ.; Samsung Adv. Inst. Science and Technology; Seoul National Univ. of Technology

    2009-01-01

    The effects of self-assembled monolayer (SAM) and perfluoropolyether (PFPE) lubricant on the wear characteristics of flat silicon tips were investigated. The wear test consisted of sliding the silicon tips fabricated on a flat silicon specimen against SAM and PFPE (Z-tetraol) coated silicon (100) wafer. The tips were slid at a low speed for about 15 km under an applied load of 39.2 {micro}N. The wear volume of the tip was obtained by measuring the tip profile using an Atomic Force Microscope (AFM). It was found that the coatings were effective in reducing the wear of the tips by an order of magnitude from 10{sup -6} to 10{sup -7}.

  14. Nanopatterning and tuning of optical taper antenna apex for tip-enhanced Raman scattering performance

    SciTech Connect

    Kharintsev, S. S.; Rogov, A. M.; Kazarian, S. G.

    2013-09-15

    This paper focuses on finding optimal electrochemical conditions from linear sweep voltammetry analysis for preparing highly reproducible tip-enhanced Raman scattering (TERS) conical gold tips with dc-pulsed voltage etching. Special attention is given to the reproducibility of tip apex shapes with different etchant mixtures. We show that the fractional Brownian motion model enables a mathematical description of the decaying current kinetics during the whole etching process up to the cutoff event. Further progress in preparation of highly reproducible smooth and sharp tip apexes is related to the effect of an additive, such as isopropanol, to aqueous acids. A finite-difference time-domain method based near-field analysis provides evidence that TERS performance depends critically on tip orientation relative to a highly focused laser beam. A TERS based criterion for recognizing gold tips able to couple/decouple optical near- and far-fields is proposed.

  15. Collider Detector at Fermilab (CDF): Data from the Top Group's Top Quark Research

    DOE Data Explorer

    The Collider Detector at Fermilab (CDF) is a Tevatron experiment at Fermilab. The Tevatron, a powerful particle accelerator, accelerates protons and antiprotons close to the speed of light, and then makes them collide head-on inside the CDF detector. The CDF detector is used to study the products of such collisions. The CDF Physics Group at Fermilab is organized into six working groups, each with a specific focus. The Top group studies the properties of the top quark, the heaviest known fundamental particle. Their public web page makes data and numerous figures available from both CDF Runs I and II.

  16. Tips: Smart Meters and a Smarter Power Grid | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Meters and a Smarter Power Grid Tips: Smart Meters and a Smarter Power Grid The Smart Grid will consist of controls, computers, automation, and new technologies and equipment -- ...

  17. QCI Exam Test-Taking Tips from Community Housing Partners (CHP)

    Energy.gov [DOE]

    This document contains a list of tips for taking the Quality Control Inspector (QCI) Home Energy Professional Certification Exam, provided by Community Housing Partners (CHP).

  18. #tipsEnergy: How to Save Energy This Summer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    How to Save Energy This Summer #tipsEnergy: How to Save Energy This Summer June 19, 2013 - 4:02pm Addthis Rebecca Matulka Rebecca Matulka Former Digital Communications Specialist, Office of Public Affairs #tipsEnergy: How to Save Energy This Summer Every month we ask you to share your energy-saving tips, and we feature some of the best ideas in a Storify to encourage others to save energy and money at home. For this month's #tipsEnergy, we want to know how you plan to save energy during the

  19. #tipsEnergy: Saving on Home Heating Costs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Saving on Home Heating Costs #tipsEnergy: Saving on Home Heating Costs November 23, 2012 - 3:37pm Addthis Rebecca Matulka Rebecca Matulka Former Digital Communications Specialist, Office of Public Affairs #tipsEnergy: Saving on Home Heating Costs A feature on the Energy Department's Twitter account, #tipsEnergy highlights ways to save energy and money at home. Once a month, we ask you to share your energy-saving tips so the larger energy community can learn from you, and we feature some of the

  20. Energy Saver Guide: Tips on Saving Money and Energy at Home | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Services » Energy Saver Guide: Tips on Saving Money and Energy at Home Energy Saver Guide: Tips on Saving Money and Energy at Home Energy Saver Guide: Tips on Saving Money and Energy at Home In addition to finding detailed energy-saving information on the Energy Saver website, you can download or order a printed Energy Saver guide with tips for saving money and energy at home and on the road. The printed guide is not as detailed as the website, but by following just a few of the

  1. 5 Energy-Saving Tips For When Daylight Saving Time Ends | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy 5 Energy-Saving Tips For When Daylight Saving Time Ends 5 Energy-Saving Tips For When Daylight Saving Time Ends November 4, 2016 - 12:45pm Addthis There are many easy energy-saving tips you can do around the house that will help you save money on your utility bills. There are many easy energy-saving tips you can do around the house that will help you save money on your utility bills. Drew Bittner Writer/Editor, Office of Energy Efficiency and Renewable Energy Check out EnergySaver.gov

  2. Tips for Running an Air Conditioner Without Breaking the Bank | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Tips for Running an Air Conditioner Without Breaking the Bank Tips for Running an Air Conditioner Without Breaking the Bank July 22, 2014 - 3:15pm Addthis Cooling your home doesn't have to break the bank, with these tips you can save money and stay comfortable.| Photo courtesy of ©iStockphoto.com/galinast Cooling your home doesn't have to break the bank, with these tips you can save money and stay comfortable.| Photo courtesy of ©iStockphoto.com/galinast Elizabeth Spencer

  3. Earth Day Recap: Sharing Tips for Improving Your Home’s Energy Efficiency

    Energy.gov [DOE]

    Looking for ways to save energy and money at home? Check out the tips and advice we shared on Earth Day.

  4. Upgrade Boilers with Energy-Efficient Burners - Steam Tip Sheet #24

    SciTech Connect

    2012-01-01

    This revised AMO steam tip sheet on upgrading boilers provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  5. Consider Installing Turbulators on Two- and Three-Pass Firetube Boilers - Steam Tip Sheet #25

    SciTech Connect

    2012-01-01

    This revised AMO tip sheet on installing turbulators on firetube boilers provides how-to advice for improving the system using low-cost, proven practices and technologies.

  6. Consider Installing Turbulators on Two- and Three-Pass Firetube Boilers - Steam Tip Sheet #25

    SciTech Connect

    2006-01-01

    This revised AMO tip sheet on installing turbulators on firetube boilers provides how-to advice for improving the system using low-cost, proven practices and technologies.

  7. Top 100 Oil and Gas Fields of 2009

    Energy Information Administration (EIA) (indexed site)

    Top 100 Oil and Gas Fields of 2009 Introduction This supplement to the Energy Information Administration's summary of U.S. Crude Oil, Natural Gas, and Natural Gas Liquids Proved Reserves, 2009 ranks the United States' largest oil and gas fields by their estimated 2009 proved reserves. The Top 100's Share of U.S. Proved Reserves in 2009 The Top 100 oil fields and Top 100 gas fields each accounted for about 60 percent of the respective total proved reserves of the United States. The Top 100 oil

  8. Searches for New Physics in Top Decays at D0

    SciTech Connect

    Pleier, Marc-Andre; /Brookhaven

    2011-08-01

    The Tevatron proton-antiproton collider at Fermilab with its centre of mass energy of 1.96 TeV allows for pair production of top quarks and the study of top quark decay properties. This report reflects the current status of measurements of the W boson helicity in top quark decays and the ratio of top quark branching fractions as well as searches for neutral current top quark decays and pair production of fourth generation t' quarks, performed by the D0 Collaboration utilising datasets of up to 5.4 fb{sup -1}.

  9. Summary of Single top quark production at the Tevatron

    SciTech Connect

    Schwienhorst, R.; CDF, on the

    2014-01-01

    The production of single-top quarks occurs via the weak interaction at the Fermilab Tevatron proton-antiproton collider. Single top quark events are selected in the lepton+jets final state by CDF and D0 and in the missing transverse energy plus jets final state by CDF. Multivariate classifiers separate the s-channel and t-channel single-top signals from the large backgrounds. The combination of CDF and D0 results leads to the first observation of the s-channel mode of single top quark production. The t-channel and single top combined cross sections have also been measured.

  10. Los Alamos National Laboratory top science news of 2012

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Los Alamos National Laboratory top science news of 2012 Los Alamos National Laboratory top science news of 2012 Top science stories for the year traveled from the canyons of Mars to the high desert forests of New Mexico, from cosmic particles to the structure of proteins and enzymes. December 20, 2012 Top science stories for the year traveled from the canyons of Mars to the high desert forests of New Mexico, from cosmic particles to the structure of proteins and enzymes. Top science stories for

  11. Low NOx nozzle tip for a pulverized solid fuel furnace

    DOEpatents

    Donais, Richard E; Hellewell, Todd D; Lewis, Robert D; Richards, Galen H; Towle, David P

    2014-04-22

    A nozzle tip [100] for a pulverized solid fuel pipe nozzle [200] of a pulverized solid fuel-fired furnace includes: a primary air shroud [120] having an inlet [102] and an outlet [104], wherein the inlet [102] receives a fuel flow [230]; and a flow splitter [180] disposed within the primary air shroud [120], wherein the flow splitter disperses particles in the fuel flow [230] to the outlet [104] to provide a fuel flow jet which reduces NOx in the pulverized solid fuel-fired furnace. In alternative embodiments, the flow splitter [180] may be wedge shaped and extend partially or entirely across the outlet [104]. In another alternative embodiment, flow splitter [180] may be moved forward toward the inlet [102] to create a recessed design.

  12. Reduce Air Infiltration in Furnaces; Industrial Technologies Program (ITP) Energy Tips - Process Heating Tip Sheet #5 (Fact Sheet).

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    5 * January 2006 Industrial Technologies Program Reduce Air Infiltration in Furnaces Fuel-fired furnaces discharge combustion products through a stack or a chimney. Hot furnace gases are less dense and more buoyant than ambient air, so they rise, creating a differential pressure between the top and the bottom of the furnace. This differential, known as thermal head, is the source of a natural draft or negative pressure in furnaces and boilers. A well-designed furnace (or boiler) is built to

  13. Omnidirectional capacitive probe for gauge of having a sensing tip formed as a substantially complete sphere

    DOEpatents

    Jostlein, Hans

    1994-01-01

    A non-contact, omni-directional capacitive probe for use in dimensional gauging includes an electrically conductive spherical sensing tip that forms a capacitor with a workpiece, the capacitance of the capacitor being indicative of the distance between the spherical sensing tip and the workpiece.

  14. Preparation of scanning tunneling microscopy tips using pulsed alternating current etching

    SciTech Connect

    Valencia, Victor A.; Thaker, Avesh A.; Derouin, Jonathan; Valencia, Damian N.; Farber, Rachael G.; Gebel, Dana A.; Killelea, Daniel R.

    2015-03-15

    An electrochemical method using pulsed alternating current etching (PACE) to produce atomically sharp scanning tunneling microscopy (STM) tips is presented. An Arduino Uno microcontroller was used to control the number and duration of the alternating current (AC) pulses, allowing for ready optimization of the procedures for both Pt:Ir and W tips using a single apparatus. W tips prepared using constant and pulsed AC power were compared. Tips fashioned using PACE were sharper than those etched with continuous AC power alone. Pt:Ir tips were prepared with an initial coarse etching stage using continuous AC power followed by fine etching using PACE. The number and potential of the finishing AC pulses was varied and scanning electron microscope imaging was used to compare the results. Finally, tip quality using the optimized procedures was verified by UHV-STM imaging. With PACE, at least 70% of the W tips and 80% of the Pt:Ir tips were of sufficiently high quality to obtain atomically resolved images of HOPG or Ni(111)

  15. Two-step fabrication technique of gold tips for use in point-contact spectroscopy

    SciTech Connect

    Narasiwodeyar, S.; Dwyer, M.; Liu, M.; Park, W. K. Greene, L. H.

    2015-03-15

    For a successful point-contact spectroscopy (PCS) measurement, metallic tips of proper shape and smoothness are essential to ensure the ballistic nature of a point-contact junction. Until recently, the fabrication of Au tips suitable for use in point-contact spectroscopy has remained more of an art involving a trial and error method rather than an automated scientific process. To address these issues, we have developed a technique with which one can prepare high quality Au tips reproducibly and systematically. It involves an electronic control of the driving voltages used for an electrochemical etching of a gold wire in a HCl-glycerol mixture or a HCl solution. We find that a stopping current, below which the circuit is set to shut off, is a single very important parameter to produce an Au tip of desired shape. We present detailed descriptions for a two-step etching process for Au tips and also test results from PCS measurements using them.

  16. Angular correlations in top quark decays in standard model extensions

    SciTech Connect

    Batebi, S.; Etesami, S. M.; Mohammadi-Najafabadi, M.

    2011-03-01

    The CMS Collaboration at the CERN LHC has searched for the t-channel single top quark production using the spin correlation of the t-channel. The signal extraction and cross section measurement rely on the angular distribution of the charged lepton in the top quark decays, the angle between the charged lepton momentum and top spin in the top rest frame. The behavior of the angular distribution is a distinct slope for the t-channel single top (signal) while it is flat for the backgrounds. In this Brief Report, we investigate the contributions which this spin correlation may receive from a two-Higgs doublet model, a top-color assisted technicolor (TC2) and the noncommutative extension of the standard model.

  17. Loan Guarantee Recipient Awarded Top Renewable Plant | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Renewable Plant Loan Guarantee Recipient Awarded Top Renewable Plant December 16, 2015 - 10:00am Addthis Loan Guarantee Recipient Awarded Top Renewable Plant Mark A. McCall Mark A. McCall Executive Director of the Loan Programs Office The Department's Loan Programs Office (LPO) has provided financing for numerous award-winning clean energy projects. The latest is Desert Sunlight, a 550-megawatt (MW) photovoltaic (PV) solar power plant located in Riverside County, California, that was issued

  18. Low-Cost Ventilation in Production Housing - Building America Top

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Innovation | Department of Energy Low-Cost Ventilation in Production Housing - Building America Top Innovation Low-Cost Ventilation in Production Housing - Building America Top Innovation This drawing shows simple and cost-effective ventilation strategies for homes. As high-performance homes get more air tight and better insulated, attention to good indoor air quality becomes essential. This Top Innovation profile describes Building America research by Building Science Corporation to develop

  19. Building Science-Based Climate Maps - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Building Science-Based Climate Maps - Building America Top Innovation Building Science-Based Climate Maps - Building America Top Innovation Photo showing climate zone maps based on the IECC climate zone map. It may not be intuitively obvious why a U.S. climate zone map is so important to the construction industry. Thanks to this Building America Top Innovation, building science education, energy code development, and residential design can much more effectively integrate

  20. Building America Top Innovations Hall of Fame Profile - Building Energy

    Energy Saver

    Optimization Analysis Method (BEopt) | Department of Energy America Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) Building America Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) 3_3a_ba_innov_beopt_011713.pdf (877.48 KB) More Documents & Publications Building Energy Optimization Analysis Method (BEopt) - Building America Top Innovation BEopt Version 2.0: New Features Building America Webinar:

  1. Exterior Rigid Insulation Best Practices - Building America Top Innovation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Exterior Rigid Insulation Best Practices - Building America Top Innovation Exterior Rigid Insulation Best Practices - Building America Top Innovation Effec guid-exterior rigid insulation.jpg For years, Building America research teams have advocated using the thermal, air, and vapor properties of rigid foam sheathing insulation to improve walls. Several teams earned a 2013 Top Innovation award for their research into this technology. The NorthernSTAR team's

  2. 2016 Top Markets Report: Renewable Fuels | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Markets Report: Renewable Fuels 2016 Top Markets Report: Renewable Fuels Plenary IV: Policy for the Bioeconomy-Local, State, Federal, and International Perspectives 2016 Top Markets Report: Renewable Fuels Cora Dickson, Senior International Trade Specialist, U.S. Department of Commerce dickson_bioenergy_2016.pdf (1.39 MB) More Documents & Publications International Market Opportunities in Bioenergy: Leveraging U.S. Government Resources Market Drivers for Biofuels 2015 Peer Review

  3. Top Quark Pair Production Cross Section at the Tevatron

    SciTech Connect

    Peters, Reinhild Yvonne

    2015-09-25

    The top quark, discovered in 1995 by the CDF and D0 collaborations at the Tevatron proton antiproton collider at Fermilab, has undergone intense studies in the last 20 years. Currently, CDF and D0 converge on their measurements of top-antitop quark production cross sections using the full Tevatron data sample. In these proceedings, the latest results on inclusive and differential measurements of top-antitop quark production cross sections at the Tevatron are reported.

  4. EM Recovery Act Top Line Messages | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Line Messages EM Recovery Act Top Line Messages The latest Recovery Act performance related information and metrics. EM Recovery Act Top Line Messages - April, 2013 (1.96 MB) More Documents & Publications Workers at Hanford Site Achieve Recovery Act Legacy Cleanup Goals Ahead of Schedule Audit Report: IG-0426 Testimony of Mark Whitney Principal Deputy Assistant Secretary for Environmental Management Before the Subcommittee on Environment and the Economy House Energy and Commerce

  5. Model Simulating Real Domestic Hot Water Use - Building America Top

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Innovation | Department of Energy Model Simulating Real Domestic Hot Water Use - Building America Top Innovation Model Simulating Real Domestic Hot Water Use - Building America Top Innovation Image of a pipe insulation.jpg As progress continues with high-R, tightly sealed thermal enclosures, domestic hot water becomes an increasingly important energy use in high-performance homes. This Top Innovation describes Building America research by Alliance for Residential Building Innovation and the

  6. Cyclotron Road: Creating a Home for Top Clean Energy Technology

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Entrepreneurs within our National Laboratories | Department of Energy Cyclotron Road: Creating a Home for Top Clean Energy Technology Entrepreneurs within our National Laboratories Cyclotron Road: Creating a Home for Top Clean Energy Technology Entrepreneurs within our National Laboratories September 2, 2015 - 10:53am Addthis Cyclotron Road: Creating a Home for Top Clean Energy Technology Entrepreneurs within our National Laboratories David Danielson Former Assistant Secretary for the Office

  7. Building America 1995-2012 Top Innovations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    America 1995-2012 Top Innovations Building America 1995-2012 Top Innovations This page provides a listing of and links to legacy Building America Top Innovations developed from 1995-2012. Advanced Technologies and Practices Building Science Solutions Thermal Enclosure: Basement Insulation Systems Advanced Framing Systems and Packages Unvented, Conditioned Crawlspaces Unvented, Conditioned Attics High-R Walls Optimized Comfort Systems: Integration of HVAC System Design with Simplified Duct

  8. Building America 2013 Top Innovations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Innovations Building America 2013 Top Innovations This page provides a listing of and links to Building America Top Innovations awarded in 2013. Advanced Technologies and Practices Building Science Solutions Thermal Enclosure: Next Generation Advanced Framing Optimized Comfort Systems: Buried and Encapsulated Ducts Furnace Blower Performance Improvements High Efficiency Window Air Conditioners House-as-a-System Business Case Zero Energy Ready Single Family Homes Effective Guidance and Tools

  9. Building America 2014 Top Innovations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building America 2014 Top Innovations Building America 2014 Top Innovations This page provides a listing of and links to Building America Top Innovations awarded in 2014. Advanced Technologies and Practices BUILDING SCIENCE SOLUTIONS Thermal Enclosure: Cost-Optimized Attic Insulation Solution for Factory-Built Homes OPTIMIZED COMFORT SOLUTIONS HVAC Cabinet Air Leakage Test Method California Energy Standards Recognize the Importance of Filter Selection ASSURED HEALTH AND SAFETY ASHRAE Standard

  10. The Top Quark, Its Discovery, and Subsequent Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The Top Quark, Its Discovery, and Subsequent Research Resources with Additional Information 'Ever since the existence of the bottom (or b) quark was inferred from the discovery of the Upsilon family of resonances at Fermilab in 1977, particle physicists have been on the lookout for its partner, called top (or t). The long search, which occupied experimenters at laboratories around the world, came to a successful conclusion in February 1995 with the announcement that the top quark had been

  11. Top 10 Vulnerabilities of Control Systems and Their Associated Migitations

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (2006) | Department of Energy Top 10 Vulnerabilities of Control Systems and Their Associated Migitations (2006) Top 10 Vulnerabilities of Control Systems and Their Associated Migitations (2006) This document addresses potential risks that can apply to some electricity sector organizations and provides practices that can help mitigate the risks. Each organization decides for itself the risks it can accept and the practices it deems appropriate to manage those risks. Top 10 Vulnerabilities of

  12. Tankless Gas Water Heater Performance - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Tankless Gas Water Heater Performance - Building America Top Innovation Tankless Gas Water Heater Performance - Building America Top Innovation This photo shows a hot water heater measuring device mounted on the outside of a building wall. As improved thermal enclosures dramatically reduce heating and cooling loads, the water heating load continues to grow in importance. This Top Innovations profile describes Building America field testing by IBACOS that shed light on

  13. Basement Insulation Systems - Building America Top Innovation | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Basement Insulation Systems - Building America Top Innovation Basement Insulation Systems - Building America Top Innovation This photo shows a framed basement wall with insulation in between the studs. Efficient and durable construction practices for basements are critical because basements can account for 10% to 30% of a home's total heat loss and provide significant risk of moisture problems due to extensive cold surfaces at the walls and slab. For this Top Innovation award,

  14. Dateline Los Alamos: Top science news of 2014

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Top science news of 2014 Dateline Los Alamos: Top science news of 2014 Los Alamos National Laboratory today announced its annual top science stories of 2014. December 22, 2014 Los Alamos National Laboratory postdoctoral researcher Elena Guardincerri, right, and undergraduate research assistant Shelby Fellows prepare a lead hemisphere inside a muon tomography machine, which can peer inside closed containers and provide detailed images of dense objects such as nuclear materials or other items of

  15. Unvented Crawlspace Code Adoption - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Unvented Crawlspace Code Adoption - Building America Top Innovation Unvented Crawlspace Code Adoption - Building America Top Innovation Photo of an unvented and insulated crawlspace. This Top Innovation profile describes Building America research by Building Science Corporation that helped to clarify and contribute to code requirements that allow unvented crawlspaces in new home construction. This is critical because unvented crawlspaces save energy while improving

  16. Valuing Green in the Appraisal Process - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Valuing Green in the Appraisal Process - Building America Top Innovation Valuing Green in the Appraisal Process - Building America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in identifying comparables and in supporting adjustments for improvements. These difficulties stem BARA Green Addendum Top Innov 2014-2.jpg from many reasons, including data gaps in commonly used information systems and lender

  17. TOP 10 VULNERABILITIES OF CONTROL SYSTEMS AND THEIR ASSOCIATED...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top 10 Vulnerabilities of Control Systems and Their Associated Migitations (2006) Introduction SCADA Security for Managers and Operators DOE National SCADA Test Bed Program ...

  18. Building America Top Innovations 2013 Profile - Building America...

    Energy Saver

    Building America Top Innovations 2013 Profile - Building America Solution Center PNNL set up the framework for the Building America Solution Center, a web tool connecting users to ...

  19. EM's Top Official Celebrates 'Cocooning' of Reactor Dedicated...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Celebrates 'Cocooning' of Reactor Dedicated by President Kennedy Decades Ago EM's Top Official Celebrates 'Cocooning' of Reactor Dedicated by President Kennedy Decades Ago June 1, ...

  20. Next Generation Advanced Framing - Building America Top Innovation...

    Energy Saver

    Innovation DOE Zero Energy Ready Home Case Study: Charles Thomas Homes, Anna Model, Omaha, NE Top Innovation Categories Advanced Technologies House as a System Business Case ...

  1. NSTec tops more than $2 million in contributions to education...

    National Nuclear Security Administration (NNSA)

    tops more than 2 million in contributions to education outreach | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the...

  2. NREL's Bobi Garrett Named Top Industry Executive | Awards and...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    and partnerships at the Energy Department's National Renewable Energy Laboratory (NREL), was recognized by the Denver Business Journal as one of the region's top female...

  3. Sequoia supercomputer tops Graph 500 | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Lawrence Livermore National Laboratory scientists' search for new ways to solve large complex national security problems led to the top ranking on Graph 500 and new techniques for ...

  4. Path to Deterministic Single Donor Devices using Focused Top...

    Office of Scientific and Technical Information (OSTI)

    Path to Deterministic Single Donor Devices using Focused Top-Down Ion Implantation. Citation Details In-Document Search Title: Path to Deterministic Single Donor Devices using ...

  5. Advanced Nanofabrication of Single Donor Devices using Top-Down...

    Office of Scientific and Technical Information (OSTI)

    Advanced Nanofabrication of Single Donor Devices using Top-Down Implantation. Citation Details In-Document Search Title: Advanced Nanofabrication of Single Donor Devices using ...

  6. America's Next Top Energy Innovator Challenge | Department of...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Learn More Woodmont Enterprises LLC Oak Ridge National Laboratory 703 likes Woodmont Enterprises, based in Nashville, Tennessee, is creating a top-coat solution moisture barrier ...

  7. Sequoia ranked third in TOP500 list | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    according to the industry-standard Top500 list. Sequoia, which recently completed its transition to classified computing in support of NNSA's Stockpile Stewardship Program,...

  8. Recent Results on Top-Quark Physics at D0

    SciTech Connect

    Bloom, Kenneth

    2015-10-23

    We present the most recent measurements on top-quark physics obtained with Tevatron $p\\bar{p}$ collisions recorded by the D0 experiment at $\\sqrt{s}= 1.96$ TeV. The full Run II data set of 9.7 fb$^{-1}$ is analyzed. Both lepton+jets and dilepton channels of top-quark pair production are used to measure the differential and inclusive cross sections, the forward-backward asymmetries, the top-quark mass, the spin correlations, and the top-quark polarization.

  9. TOP AND HIGGS PHYSICS AT THE HADRON COLLIDERS

    SciTech Connect

    Jabeen, Shabnam

    2013-10-20

    This review summarizes the recent results for top quark and Higgs boson measurements from experiments at Tevatron, a proton–antiproton collider at a center-of-mass energy of √ s =1 . 96 TeV, and the Large Hadron Collider, a proton–proton collider at a center- of-mass energy of √ s = 7 TeV. These results include the discovery of a Higgs-like boson and measurement of its various properties, and measurements in the top quark sector, e.g. top quark mass, spin, charge asymmetry and production of single top quark.

  10. NNSA Production Office tops Feds Feed Families campaign goal...

    National Nuclear Security Administration (NNSA)

    tops Feds Feed Families campaign goal | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation...

  11. Effective Guidance and Tools - Building America Top Innovations...

    Office of Environmental Management (EM)

    High-Performance Home Metrics These Top Innovations provide key technical tools and databases for analyzing energy efficiency measures and achieving optimal savings. 1995-2012...

  12. Large Higgs energy region in Higgs associated top pair production...

    Office of Scientific and Technical Information (OSTI)

    Large Higgs energy region in Higgs associated top pair production at the Linear Collider Citation Details In-Document Search Title: Large Higgs energy region in Higgs associated ...

  13. Groundwater, Legacy Soil Cleanup and Flood Recovery Top Lab's...

    Energy.gov [DOE] (indexed site)

    a legacy contaminant soil cleanup project, and rapid ... Waste and Water Top 2013 Accomplishments for Los Alamos EM ... subcontractor TerranearPMC crews to take hand-augured ...

  14. Single top production as a probe of heavy resonances | OSTI,...

    Office of Scientific and Technical Information (OSTI)

    Single top production as a probe of heavy resonances Not Available Temp HTML Storage 2: Drueke, Elizabeth; Nutter, Joseph; Schwienhorst, Reinhard; Vignaroli, Natascia; Walker, ...

  15. Valuing Green in the Appraisal Process - Building America Top...

    Energy Saver

    Valuing Green in the Appraisal Process - Building America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in ...

  16. Vision Machine & Fabrication Corp. Named Top Small Business Subcontrac...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Vision Machine & Fabrication Corp. Named Top Small Business Subcontractor at Jefferson Lab for FY 2014 NEWPORT NEWS, VA, Sept. 10, 2015 - Jefferson Science Associates, the...

  17. NREL Staff Recognized for Top Innovations as Lab Celebrates Record...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Staff Recognized for Top Innovations as Lab Celebrates Record Patent Year DOE EERE Assistant Secretary David Danielson highlights "innovation culture" of national labs May 7, 2015 ...

  18. Westinghouse earns top award from quality new mexico

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Earns Top Award From Quality New Mexico CARLSBAD, N.M., January 11, 2000 - The Westinghouse Waste Isolation Division led a group of three Carlsbad organizations recognized by...

  19. Top Low- or No-Cost Improvements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Low- or No-Cost Improvements Top Low- or No-Cost Improvements This presentation describes the top low- or no-cost projects to improve energy efficiency as identified in energy assessments performed by DOE and by the Industrial Assessment Centers. Top Low- or No-Cost Improvements (April 2, 2009) (1.94 MB) More Documents & Publications Energy Assessments FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System Energy-Reduction Goals with a Three-Phased Strategy Save Energy Now in Your

  20. ESnet Named One of Top Government IT Innovators -- Again

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ESnet Named One of Top Government IT Innovators - Again News & Publications ESnet News Media & Press Publications and Presentations Galleries ESnet Awards and Honors Contact Us...

  1. The Business Case for Fuel Cells 2011: Energizing America's Top...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Business Case for Fuel Cells 2011: Energizing America's Top Companies November 2011 i ... Jennifer Gangi, and Sandra Curtin of Fuel Cells 2000, an activity of Breakthrough ...

  2. Secretary Chu Recognizes America's Next Top Energy Innovators...

    Office of Environmental Management (EM)

    ... View a video on the startup's technology here. Addthis Related Articles The America's Next Top Energy Innovator Challenge makes inventions and technologies developed at the U.S. ...

  3. Help Choose America's Next Top Energy Innovator | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Choose America's Next Top Energy Innovator Help Choose America's Next Top Energy Innovator January 26, 2012 - 9:00am Addthis The America’s Next Top Energy Innovator Challenge, a part of the Startup America initiative, makes it easier for start-ups to use inventions and technologies developed at the U.S. Department of Energy’s 17 National Laboratories and the Y-12 National Security Complex. | Photo courtesy of National Renewable Energy Laboratory. The America's Next Top Energy Innovator

  4. Northwest public utilities, BPA top five-year energy savings...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Northwest-public-utilities-BPA-top-five-year-energy-savings-target Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects &...

  5. Top Solar Technology Co Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Manufacturer of PV module connector systems and conductive aluminium paste for PV cells. References: Top Solar Technology Co Ltd1 This article is a stub. You can help...

  6. Building America Solution Center - Building America Top Innovation...

    Energy Saver

    Building America Solution Center - Building America Top Innovation SCimagemale.jpg The Building America Solution Center is a Web-based tool connecting users to fast, free, and ...

  7. Effect of Tip-Speed Constraints on the Optimized Design of a Wind Turbine

    SciTech Connect

    Dykes, K.; Resor, B.; Platt, A.; Guo, Y.; Ning, A.; King, R.; Parsons, T.; Petch, D.; Veers, P.

    2014-10-01

    This study investigates the effect of tip-velocity constraints on system levelized cost of energy (LCOE). The results indicate that a change in maximum tip speed from 80 to 100~m/s could produce a 32% decrease in gearbox weight (a 33% reduction in cost) which would result in an overall reduction of 1%-9% in system LCOE depending on the design approach. Three 100~m/s design cases were considered including a low tip-speed ratio/high-solidity rotor design, a high tip-speed ratio/ low-solidity rotor design, and finally a flexible blade design in which a high tip-speed ratio was used along with removing the tip deflection constraint on the rotor design. In all three cases, the significant reduction in gearbox weight caused by the higher tip-speed and lower overall gear ratio was counterbalanced by increased weights for the rotor and/or other drivetrain components and the tower. As a result, the increased costs of either the rotor or drivetrain components offset the overall reduction in turbine costs from down-sizing the gearbox. Other system costs were not significantly affected, whereas energy production was slightly reduced in the 100~m/s case low tip-speed ratio case and increased in the high tip-speed ratio case. This resulted in system cost of energy reductions moving from the 80~m/s design to the 100~m/s designs of 1.2% for the low tip-speed ratio, 4.6% for the high tip-speed ratio, and 9.5% for the final flexible case (the latter result is optimistic because the impact of deflection of the flexible blade on power production was not modeled). Overall, the results demonstrate that there is a trade-off in system design between the maximum tip velocity and the overall wind plant cost of energy, and there are many trade-offs within the overall system in designing a turbine for a high maximum tip velocity.

  8. Precision tip-tilt-piston actuator that provides exact constraint

    DOEpatents

    Hale, Layton C.

    1999-01-01

    A precision device which can precisely actuate three degrees of freedom of an optic mount, commonly referred to as tip, tilt, and piston. The device consists of three identical flexure mechanisms, an optic mount to be supported and positioned, a structure that supports the flexure mechanisms, and three commercially available linear actuators. The advantages of the precision device is in the arrangement of the constraints offered by the flexure mechanism and not in the particular design of the flexure mechanisms, as other types of mechanisms could be substituted. Each flexure mechanism constrains two degrees of freedom in the plane of the mechanisms and one direction is actuated. All other degrees of freedom are free to move within the range of flexure mechanisms. Typically, three flexure mechanisms are equally spaced in angle about to optic mount and arranged so that each actuated degree of freedom is perpendicular to the plane formed by the optic mount. This arrangement exactly constrains the optic mount and allows arbitrary actuated movement of the plane within the range of the flexure mechanisms. Each flexure mechanism provides a mechanical advantage, typically on the order of 5:1, between the commercially available actuator and the functional point on the optic mount. This improves resolution by the same ratio and stiffness by the square of the ratio.

  9. Controlling systems that drift through a tipping point

    SciTech Connect

    Nishikawa, Takashi; Ott, Edward

    2014-09-01

    Slow parameter drift is common in many systems (e.g., the amount of greenhouse gases in the terrestrial atmosphere is increasing). In such situations, the attractor on which the system trajectory lies can be destroyed, and the trajectory will then go to another attractor of the system. We consider the case where there are more than one of these possible final attractors, and we ask whether we can control the outcome (i.e., the attractor that ultimately captures the trajectory) using only small controlling perturbations. Specifically, we consider the problem of controlling a noisy system whose parameter slowly drifts through a saddle-node bifurcation taking place on a fractal boundary between the basins of multiple attractors. We show that, when the noise level is low, a small perturbation of size comparable to the noise amplitude applied at a single point in time can ensure that the system will evolve toward a target attracting state with high probability. For a range of noise levels, we find that the minimum size of perturbation required for control is much smaller within a time period that starts some time after the bifurcation, providing a window of opportunity for driving the system toward a desirable state. We refer to this procedure as tipping point control.

  10. Why high-frequency pulse tubes can be tipped

    SciTech Connect

    Swift, Gregory W092710; Backhaus, Scott N

    2010-01-01

    The typical low-frequency pulse-tube refrigerator loses significant cooling power when it is tipped with the pulse tube's cold end above its hot end, because natural convection in the pulse tube loads the cold heat exchanger. Yet most high-frequency pulse-tube refrigerators work well in any orientation with respect to gravity. In such a refrigerator, natural convection is suppressed by sufficiently fast velocity oscil1ations, via a nonlinear hydrodynamic effect that tends to align the density gradients in the pulse tube parallel to the oscillation direction. Since gravity's tendency to cause convection is only linear in the pulse tube's end-to-end temperature difference while the oscillation's tendency to align density gradients with oscillating velocity is nonlinear, it is easiest to suppress convection when the end-to-end temperature difference is largest. Simple experiments demonstrate this temperature dependence, the strong dependence on the oscillating velocity, and little dependence on the magnitude or phase of the oscillating pressure. In some circumstances in this apparatus, the suppression of convection is a hysteretic function of oscillating velocity. In some other circumstances, a time-dependent convective state seems more difficult to suppress.

  11. Building America Top Innovations 2012: Advanced Framing Systems and Packages

    SciTech Connect

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research showing advanced 2x6, 24-inch on-center framing, single top plates, open headers, and 2-stud corners reduced board feet of lumber by more than 1,000 feet, cut energy use by 13%, and cut material and labor costs by more than $1,000 on a typical home.

  12. Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site March 16, 2012 - 12:46pm Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory For years, many of you have found energy-saving tips about how to save money and energy at home, in your vehicle, and at work on our EnergySavers desktop site. This month, we launched a new Energy Savers mobile

  13. Stay Warm and Save Money This Winter with Tips from the Energy Department |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Stay Warm and Save Money This Winter with Tips from the Energy Department Stay Warm and Save Money This Winter with Tips from the Energy Department December 19, 2011 - 1:24pm Addthis Department of Energy headquarters during the winter months. | DOE file photo. Department of Energy headquarters during the winter months. | DOE file photo. What does this mean for me? Help your family save money by saving energy with these tips this winter. Click "start now" on

  14. U.S. Department of Energy Launches Website with Energy Saving Tips for

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Consumers | Department of Energy Website with Energy Saving Tips for Consumers U.S. Department of Energy Launches Website with Energy Saving Tips for Consumers April 22, 2008 - 10:49am Addthis Site Highlights Ways to Make Everyday Earth Day with Wise Energy Choices WASHINGTON, D.C. - The U.S. Department of Energy (DOE) today launched a new internet feature which provides tips to consumers on how to make everyday Earth Day by making smart energy choices to save money while protecting the

  15. Br-rich Tips of Calcified Crab Claws are Less Hard but More Fracture

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resistant: A Comparison of Mineralized and Heavy-element Biological Materials Br-rich Tips of Calcified Crab Claws are Less Hard but More Fracture Resistant: A Comparison of Mineralized and Heavy-element Biological Materials figure 1 Figure 1. The heavy element biomaterial is the darker material at the tip of the shore crab claws. Figure "b" shows the same claw as "a" but after bead blasting. The claw tips are less eroded by the bead blasting than surrounding calcified

  16. Measurements of the Top Quark at the Tevatron Collider

    SciTech Connect

    Cerrito, Lucio

    2007-01-01

    The authors present recent preliminary measurements of the top-antitop pair production cross section and determinations of the top quark pole mass, performed using the data collected by the CDF and D0 Collaborations at the Tevatron Collider. In the lepton plus jets final state, with semileptonic B decay, the pair production cross section has now been measured at CDF using {approx} 760 pb{sup -1} of proton-antiproton collisions at a center-of-mass energy of {radical}s = 1.96 TeV. A measurement of the production cross section has also been made with {approx} 1 fb{sup -1} of data in the all-jets final state by the CDF Collaboration. The mass of the top quark has now been measured using {approx} 1 fb{sup -1} of collision data using all decay channels of the top quark pair, yielding the most precise measurements of the top mass to date.

  17. USDOE Top-of-Rail Lubricant Project

    SciTech Connect

    Mohumad F. Alzoubi; George R. Fenske; Robert A. Erck; Amrit S. Boparai

    2002-02-01

    Lubrication of wheel/rail systems has been recognized for the last two decades as a very important issue for railroads. Energy savings and less friction and wear can be realized if a lubricant can be used at the wheel/rail interface. On the other hand, adverse influences are seen in operating and wear conditions if improper or excessive lubrication is used. Also, inefficiencies in lubrication need to be avoided for economic and environmental reasons. The top-of-rail (TOR) lubricant concept was developed by Texaco Corporation to lubricate wheels and rails effectively and efficiently. Tranergy Corporation has been developing its SENTRAEN 2000{trademark} lubrication system for the last ten years, and this revolutionary new high-tech on-board rail lubrication system promises to dramatically improve the energy efficiency, performance, safety, and track environment of railroads. The system is fully computer-controlled and ensures that all of the lubricant is consumed as the end of the train passes. Lubricant quantity dispensed is a function of grade, speed, curve, and axle load. Tranergy also has its LA4000{trademark} wheel and rail simulator, a lubrication and traction testing apparatus. The primary task of this project was collecting and analyzing the volatile and semivolatile compounds produced as the lubricant was used. The volatile organic compounds were collected by Carbotrap cartridges and analyzed by adsorption and gas chromatography/mass spectrometry (GC/MS). The semivolatile fraction was obtained by collecting liquid that dripped from the test wheel. The collected material was also analyzed by GC/MS. Both of these analyses were qualitative. The results indicated that in the volatile fraction, the only compounds on the Environmental Protection Agency's (EPA) Superfund List of Analytes detected were contaminants either in the room air or from other potential contamination sources in the laboratory. Similarly, in the semivolatile fraction none of the detected

  18. Use Feedwater Economizers for Waste Heat Recovery, Energy Tips: STEAM, Steam Tip Sheet #3 (Fact Sheet), Advanced Manufacturing Office (AMO), Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PROGRAM Energy Tips: STEAM Steam Tip Sheet #3 Use Feedwater Economizers for Waste Heat Recovery A feedwater economizer reduces steam boiler fuel requirements by transferring heat from the fue gas to incoming feedwater. Boiler fue gases are often rejected to the stack at temperatures more than 100°F to 150°F higher than the temperature of the generated steam. Generally, boiler effciency can be increased by 1% for every 40°F reduction in fue gas temperature. By recovering waste heat, an

  19. Use Low-Grade Waste Steam to Power Absorption Chillers - Steam Tip Sheet #14

    SciTech Connect

    2012-01-31

    This revised AMO tip sheet on waste steam to power absorption chillers provides how-to advice for improving the system using low-cost, proven practices and technologies.

  20. Install Removable Insulation on Valves and Fittings - Steam Tip Sheet #17

    SciTech Connect

    2012-01-01

    This revised AMO tip sheet on installing removable insulation on valves and fittings provides how-to advice for improving the system using low-cost, proven practices and technologies.

  1. Replace Pressure-Reducing Valves with Backpressure Turbogenerators - Steam Tip Sheet #20

    SciTech Connect

    2012-01-01

    This revised AMO steam tip sheet on replacing pressure-reducing valves provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  2. Consider Installing High-Pressure Boilers with Backpressure Turbine-Generators - Steam Tip Sheet #22

    SciTech Connect

    2012-01-01

    This revised AMO tip sheet on installing high-pressure boilers provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  3. Consider Steam Turbine Drives for Rotating Equipment - Steam Tip Sheet #21

    SciTech Connect

    2012-01-01

    This revised AMO tip sheet on steam turbine drives for rotating equipment provides how-to advice for improving the system using low-cost, proven practices and technologies.

  4. #tipsEnergy: How to Save Energy This Spring | Department of Energy

    Energy.gov [DOE] (indexed site)

    some of the best tips in a Storify to encourage others to save energy and money at home. ... the changing weather to save energy and money this spring. energy.gov It's mid month & ...

  5. Energy Savings Tips on the Go: Check Out the New Energy Savers...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    For years, many of you have found energy-saving tips about how to save money and energy at ... your home more comfortable and easier to heat and cool - and save money at the same time. ...

  6. Benchmark the Fuel Cost of Steam Generation - Steam Tip Sheet #15

    SciTech Connect

    2012-01-01

    This revised AMO tip sheet on benchmarking the fuel cost of steam provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  7. Tip radius preservation for high resolution imaging in amplitude modulation atomic force microscopy

    SciTech Connect

    Ramos, Jorge R.

    2014-07-28

    The acquisition of high resolution images in atomic force microscopy (AFM) is correlated to the cantilever's tip shape, size, and imaging conditions. In this work, relative tip wear is quantified based on the evolution of a direct experimental observable in amplitude modulation atomic force microscopy, i.e., the critical amplitude. We further show that the scanning parameters required to guarantee a maximum compressive stress that is lower than the yield/fracture stress of the tip can be estimated via experimental observables. In both counts, the optimized parameters to acquire AFM images while preserving the tip are discussed. The results are validated experimentally by employing IgG antibodies as a model system.

  8. Effect of plasma parameters on growth and field emission properties of spherical carbon nanotube tip

    SciTech Connect

    Sharma, Suresh C.; Tewari, Aarti

    2011-06-15

    The effect of plasma parameters (e.g., electron density and temperature, ion density and temperature, neutral atom density and temperature) on the growth (without a catalyst), structure, and field emission properties of a spherical carbon nanotube (CNT) tip has been theoretically investigated. A theoretical model of charge neutrality, including the kinetics of electrons, positively charged ions, and neutral atoms and the energy balance of the various species in plasma, has been developed. Numerical calculations of the radius of the spherical CNT tip for different CNT number densities and plasma parameters have been carried out for the typical glow discharge plasma parameters. It is found that upon an increase in the CNT number density and plasma parameters, the radius of the spherical CNT tip decreases, and consequently the field emission factor for the spherical CNT tip increases.

  9. Interpretation of warm prestress-induced fracture toughness based on crack-tip constraint

    SciTech Connect

    Shum, D.K.M.

    1993-06-01

    This study explores the possibility of using J-Q-related crack-tip constraint concepts to provide a basis for both the interpretation of warm prestress (WPS)-induced fracture toughness and their transferability to structural applications. A finite-element boundary-layer formulation based on small-scale yielding (SSY), remote mode I K-dominant assumptions is adopted. Effects of WPS-induced crack-tip constraint are quantified in terms of deviation in either the opening-mode or the mean stress component of the WPS crack-tip fields relative to the reference K-dominant SSY state associated with monotonic-loading conditions. Over the range of WPS load-paths considered the WPS-induced crack-tip constraint closely resembles a spatially varying hydrostatic stress field. Interpretation and transferability of WPS fracture toughness under SSY conditions are specified in terms of the unload and reload ratio.

  10. Ammonia Sensors Based on Doped-Sol-Gel-Tipped Optical Fibers for Catalyst System Diagnostics

    Energy.gov [DOE]

    This work focuses on the development and application of optical fibers sensors tip-coated with sol gels that sequester a transducing material whose optical response is sensitive to NH3.

  11. Catalyst-induced growth of carbon nanotubes on tips of cantilevers and nanowires

    DOEpatents

    Lee, James Weifu; Lowndes, Douglas H.; Merkulov, Vladimir I.; Eres, Gyula; Wei, Yayi; Greenbaum, Elias; Lee, Ida

    2004-06-29

    A method is described for catalyst-induced growth of carbon nanotubes, nanofibers, and other nanostructures on the tips of nanowires, cantilevers, conductive micro/nanometer structures, wafers and the like. The method can be used for production of carbon nanotube-anchored cantilevers that can significantly improve the performance of scaning probe microscopy (AFM, EFM etc). The invention can also be used in many other processes of micro and/or nanofabrication with carbon nanotubes/fibers. Key elements of this invention include: (1) Proper selection of a metal catalyst and programmable pulsed electrolytic deposition of the desired specific catalyst precisely at the tip of a substrate, (2) Catalyst-induced growth of carbon nanotubes/fibers at the catalyst-deposited tips, (3) Control of carbon nanotube/fiber growth pattern by manipulation of tip shape and growth conditions, and (4) Automation for mass production.

  12. File:15-TX-a- Fact Sheet - Tips for a Speedy Administrative Review...

    OpenEI (Open Energy Information) [EERE & EIA]

    was last modified 05:03, 11 September 2012 Software used Acrobat PDFMaker 10.1 for Word Short title a Speedy Administrative Review Keywords fact, sheet, tips, review, permit,...

  13. #tipsEnergy: Ways to Save on Water Heating Costs | Department...

    Energy Saver

    Water Heating Costs tipsEnergy: Ways to Save on Water Heating Costs February 20, 2013 - 5:09pm Addthis Rebecca Matulka Rebecca Matulka Former Digital Communications Specialist, ...

  14. Clean Boiler Water-side Heat Transfer Surfaces - Steam Tip Sheet #7

    SciTech Connect

    2012-01-31

    This revised AMO tip sheet on cleaning boiler water-side heat transfer surfaces provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  15. Use a Vent Condenser to Recover Flash Steam Energy - Steam Tip Sheet #13

    SciTech Connect

    2012-01-31

    This revised AMO tip sheet on vent condenser to recover flash steam energy provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  16. Use Vapor Recompression to Recover Low-Pressure Waste - Steam Tip Sheet #11

    SciTech Connect

    2012-01-31

    This revised AMO tip sheet on recovering low-pressure waste steam provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  17. Insulate Steam Distribution and Condensate Return Lines - Steam Tip Sheet #2

    SciTech Connect

    2012-01-31

    This revised AMO tip sheet on insulating steam distribution and condensate return lines provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  18. Flash High-Pressure Condensate to Regenerate Low-Pressure - Steam Tip Sheet #12

    SciTech Connect

    2012-01-31

    This revised AMO tip sheet on regenerating low-pressure steam provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  19. Use Feedwater Economizers for Waste Heat Recovery - Steam Tip Sheet #3

    SciTech Connect

    2012-01-31

    This revised AMO tip sheet on feedwater economizers for waste heat recovery provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  20. Save Some Green--Grass AND Dollars--with These Lawn Care Tips...

    Energy Saver

    Save Some Green--Grass AND Dollars--with These Lawn Care Tips August 3, 2009 - 10:38am Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory ...

  1. Microsoft PowerPoint - 7_MARY_MCCDONNELL_JOHN_BALLARD_Tips for...

    National Nuclear Security Administration (NNSA)

    Len Myers Special Requests (301) 903-2180 Len.Myers@nnsa.doe.gov Patricia Smith NRC Reconciliation (301) 903-6860 PatriciaR.Smith@nnsa.doe.gov Tips for Success Report with ...

  2. 5 Checks & 5 Tips for INCITE | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Early Science Program INCITE Program 5 Checks & 5 Tips for INCITE Mira Computational Readiness Assessment ALCC Program Director's Discretionary (DD) Program ALCF Data Science Program INCITE 2016 Projects ALCC 2016-2017 Projects ADSP projects Theta ESP Projects View All Projects Publications ALCF Tech Reports Industry Collaborations 5 Checks & 5 Tips for INCITE How do you know if INCITE is right for your research? Your answers to these five questions may help you decide. Follow these

  3. Jefferson Lab's Newest Cluster Makes Top500 List of Fastest

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Supercomputers | Jefferson Lab Newest Cluster Makes Top500 List of Fastest Supercomputers Jefferson Lab's Newest Cluster Makes Top500 List of Fastest Supercomputers NEWPORT NEWS, VA, November 16, 2016 - For the third time in its history, Thomas Jefferson National Accelerator Facility is home to one of the world's 500 fastest supercomputers. The SciPhi-XVI supercomputer was just listed as a TOP500 Supercomputer Site on November 14, placing 397th on the 48th edition of the list of the world's

  4. Constraints on anomalous top quark couplings at the LHC

    SciTech Connect

    Rizzo, T.G.

    1996-09-01

    Measurements of distributions associated with the pair production of top quarks at the LHC can be used to constrain (or observe) the anomalous chromomagnetic dipole moment(k) of the top. For example, using either the tt(bar) invariant mass or the Pt distribution of top we find that sensitivities to ; k; of order 0.05 are obtainable with 100 /fb of integrated luminosity. This is similar in magnitude to what can be obtained at a 500 GeV NLC with an integrated luminosity of 50 /fb through an examination of the e(+)e(-) right arrow tt(bar)g process.

  5. Observation of $t$-channel electroweak top quark production

    SciTech Connect

    Triplett, Nathan; /Iowa State U.

    2011-04-01

    The top quark is the heaviest known fundamental particle, with a mass of 172.0{sub -1.3}{sup +0.9}GeV. This is nearly twice the mass of the second heaviest known particle, the Z boson, and roughly the mass of a gold atom. Because of its unusually large mass, studying the top quark may provide insight into the Higgs mechanism and other beyond the standard model physics. Only two accelerators in the world are powerful enough to produce top quarks. The Tevatron, which first accelerated protons in 1983, has produced almost 400,000 top quarks, roughly half at each of its two detectors: DO and CDF. The LHC is a much newer accelerator which currently has accumulated about 0.5% as much data as the Tevatron. However, when running at full luminosity, the LHC is capable of producing a top quark about once every second and will quickly surpass the Tevatron as the leading producer of top quarks. This analysis uses data from the D0 detector at the Tevatron, which are described in chapter 3. Top quarks are produced most often in pairs of top and anti-top quarks through an interaction of the strong force. This production mode was first observed in 1995 at the Tevatron. However, top quarks can also be produced though an electroweak interaction, which produces just one top quark. This production mode was first observed at the Tevatron in 2008. Single top quark production can occur in different channels. In this analysis, a measurement of the cross section of the t-channel production mode is performed. This measurement uses 5.4 fb{sup -1} of data and uses the technique of boosted decision trees in order to separate signal from background events. The t-channel cross section is measured to be: {sigma}(p{bar p} {yields} tqb + X) = 3.03{sub -0.66}{sup +0.78}pb (0.0.1). Additional cross section measurements were also performed for the s-channel as well as the s + t-channel. The measurement of each one of these three cross sections was repeated three times using different techniques, and

  6. Top quark production and properties at the Tevatron

    SciTech Connect

    Fiedler, Frank; /Munich U.

    2005-06-01

    The precise measurement of top quark production and properties is one of the primary goals of the Tevatron during Run II. The total t{bar t} production cross-section has been measured in a large variety of decay channels and using different selection criteria. Results from differential cross-section measurements and searches for new physics in t{bar t} production and top quark decays are available. Electroweak production of single top quarks has been searched for. The results from all these analyses, using typically 200 pb{sup -1} of data, are presented.

  7. Measurements of top quark production and properties at the Tevatron

    SciTech Connect

    Bartos, P.

    2014-09-15

    In this letter, we summarize the latest results of the top-quark production and properties at the Tevatron. We do not include results of the top-quark mass and single top-quark production as they were presented in separate talks. The results of the measurements are mostly consistent with the standard-model predictions. However, by looking at the production asymmetry measured by CDF, one can see a discrepancy in both, $t\\bar{t}$ inclusive and lepton-based measurements. D\\O\\ results of production asymmetry are compatible with the standard-model predictions as well as with the CDF results.

  8. Top quark and SUSY (supersymmetric) searches at CDF

    SciTech Connect

    Yeh, G.P.

    1990-05-17

    Searches for the top quark in p{bar p} collisions at {radical}s = 1.8 TeV are described. The analyses are based on data with an integrated luminosity of 4.4 pb{sup {minus}1} recorded with the Collider Detector at Fermilab in the 1988--1989 run. An upper limit on the t{bar t} cross section is obtained. The top quark with mass below 89 GeV/c{sup 2} is excluded at the 95% CL. Prospects for searches for the top quark in the future are presented. We also briefly present results on searches for supersymmetric particles. 14 refs., 10 figs.

  9. Top EM Leadership to Participate in 2016 National Cleanup Workshop |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Top EM Leadership to Participate in 2016 National Cleanup Workshop Top EM Leadership to Participate in 2016 National Cleanup Workshop March 9, 2016 - 12:00pm Addthis Top EM Leadership to Participate in 2016 National Cleanup Workshop WASHINGTON, D.C. - EM's senior leaders are set to join the 2016 National Cleanup Workshop in mid-September in the Washington, D.C.-area. The nuclear cleanup program's leaders scheduled to take part in the workshop include Assistant Secretary

  10. The heavy Top Quark Partner in Little Higgs Models

    SciTech Connect

    Larios, F.; Perez, M. A.; Penunuri, F.

    2008-07-02

    Little Higgs models provide a natural explanation for the lightness of the Higgs mass. Through the mechanism of collective symmetry breaking, one loop quadratic divergent contributions to the Higgs mass are avoided. In these models a heavy partner of the Top quark appears as required to cancel out the Top's loop contribution. This heavy Top could be produced at the LHC mainly in the single mode. Because of flavor mixing a large FCNC gtT coupling can be generated at one loop that could boost the single T production mode through gg fusion.

  11. Military students access top R&D

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Military students access top R&D Military students access top R&D Cadets and midshipmen spend summer expanding their scientific knowledge at world-class Los Alamos facilities August 27, 2013 Military students access top R&D Micah Dose, a midshipman at the U.S. Naval Academy and a SARA intern in the Laboratory's ARIES program, peers inside the glovebox where plutonium pits are dis-assembled at Los Alamos. ARIES is the only program in the nation that disassembles and destroys surplus

  12. Top-secret super-secure vault declassified

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Top-secret super-secure vault declassified Top-secret super-secure vault declassified Located in Los Alamos canyon at Technical Area 41, the Tunnel Vault was built between 1948 and 1949. July 23, 2013 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits

  13. Top Better Buildings Beat Articles for February | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Better Buildings Beat Articles for February Top Better Buildings Beat Articles for February March 4, 2016 - 9:54am Addthis Top Better Buildings Beat Articles for February By Monica Kanojia You want a rundown of the Better Buildings Beat blog's commercial sector-relevant, and we've got them. Check out February's list of Beat articles to get caught up on the progress being made by Better Buildings Partners in the market toward breaking various barriers to energy efficiency. Florida Better

  14. WIPP Receives Top Safety Award | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Safety Award WIPP Receives Top Safety Award November 9, 2011 - 12:00pm Addthis Media Contact Deb Gill www.wipp.energy.gov 575-234-7270 CARLSBAD, N.M. - The U.S. Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP) received top accolades from New Mexico's leading mining organizations. The New Mexico Bureau of Mine Safety (BMS) recently recognized URS Washington TRU Solutions (WTS), LLC, the WIPP management and operating contractor, for receiving the New Mexico Mining Association

  15. America's Next Top Energy Innovator Challenge | Department of...

    Energy.gov [DOE] (indexed site)

    The America's Next Top Energy Innovator Challenge, a part of the Startup America initiative, made it easier for start-ups to use inventions and technology developed at the U.S....

  16. Building America Top Innovations 2013 Profile Building America Solution Center

    SciTech Connect

    none,

    2013-09-01

    This Top Innovation profile provides information about the Building America Solution Center created by Pacific Northwest National Laboratory, a web tool connecting users to thousands of pieces of building science information developed by DOEs Building America research partners.

  17. PPPL earns top EPA award | Princeton Plasma Physics Lab

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    PPPL earns top EPA award By Jeanne Jackson DeVoe March 14, 2013 Tweet Widget Google Plus ... The recycling of the metal was a big factor in PPPL winning the 2012 EPA WasteWise ...

  18. Top quark properties from the Tevatron (Conference) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    about 172 GeVcsup 2, the top quark provides a unique environment for tests of the Standard Model and is believed to yield sensitivity to new physics beyond the Standard Model. ...

  19. Los Alamos National Laboratory again top contributor to United...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    County's giving campaign. July 1, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research...

  20. Building America Top Innovations 2012: Unvented, Conditioned Crawlspaces

    SciTech Connect

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research which influenced code requirements by demonstrating that unvented, conditioned crawlspaces use 15% to 18% less energy for heating and cooling while reducing humidity over 20% in humid climates.

  1. Top Quark Anomalous Couplings at the International Linear Collider...

    Office of Scientific and Technical Information (OSTI)

    This process probes the elementary couplings of the top quark to the photon, the Z and the W bosons at a level of precision that is difficult to achieve at hadron colliders. ...

  2. Building America Top Innovations 2012: High-R Walls

    SciTech Connect

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research on high-R-value walls showing the difference between rated and whole wall R values and the need for vented cladding to reduce condensation potential with some insulation types.

  3. The top quark, 20 years after its discovery

    SciTech Connect

    Denisov, Dmitri; Vellidis, Costas

    2015-04-15

    The heaviest of nature’s elementary particles plays an outsized role in many fundamental processes. But because the top quark is so massive, it eluded experimental detection for nearly two decades.

  4. Building America Top Innovations 2012: EEBA Water Management Guide

    SciTech Connect

    none,

    2013-01-01

    This Building America Top Innovations profile describes the DOE-sponsored Water Management Guide, which identifies durability issues and solutions for high-performance homes. The Water Management Guide has sold 15,000 copies since its first printing.

  5. Report of the 2005 Snowmass Top/QCD Working Group

    SciTech Connect

    Juste, A.; Kiyo, Y.; Petriello, F.; Teubner, T.; Agashe, K.; Batra, P.; Baur, U.; Berger, C.F.; Cembranos, J.A.R.; Gehrmann-De Ridder, A.; Gehrmann, T.; Glover, E.W.N.; Godfrey, S.; Hoang, A.; Perelstein, M.; Sullivan, Z.; Tait, T.; Zhu, S.; /Johns Hopkins U. /Princeton, Inst. Advanced Study /Syracuse U. /Argonne /SUNY, Buffalo /SLAC /UC, Irvine /Zurich, ETH /Zurich U. /Durham U., IPPP /Ottawa Carleton Inst. Phys. /Munich, Max Planck Inst. /Cornell U., CIHEP /Peking U.

    2006-01-17

    This report discusses several topics in both top quark physics and QCD at an International Linear Collider (ILC). Issues such as measurements at the t tbar threshold, including both theoretical and machine requirements, and the determination of electroweak top quark couplings are reviewed. New results concerning the potential of a 500 GeV e+e collider for measuring Wtb couplings and the top quark Yukawa coupling are presented. The status of higher order QCD corrections to jet production cross sections, heavy quark form factors, and longitudinal gauge boson scattering, needed for percent-level studies at the ILC, are reviewed. A new study of the measurement of the hadronic structure of the photon at a gamma gamma collider is presented. The effects on top quark properties from several models of new physics, including composite models, Little Higgs theories, and CPT violation, are studied.

  6. Building America Top Innovations 2012: Basement Insulation Systems

    SciTech Connect

    none,

    2013-01-01

    This Building America Top Innovations profile describes research on basement insulation, which identifies the wall installation methods and materials that perform best in terms of insulation and water resistance.

  7. Building America Top Innovations 2012: Tankless Gas Water Heater Performance

    SciTech Connect

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America field testing that shed light on how real-world water usage affects energy saving estimates of high-efficiency water heating systems.

  8. Building America Top Innovations 2012: Ducts in Conditioned Space

    SciTech Connect

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America field testing that found moving ductwork into the home’s conditioned space can save 8%-15% on energy costs, improve comfort, reduce moisture problems, and even reduce installation costs.

  9. Evidence for electroweak top quark production in proton-antiproton...

    Office of Scientific and Technical Information (OSTI)

    acceptance, background, and observed data we measure the single top quark cross section: sigma(pbar p yields tb + tqb + X) 4.6sub -1.5sup +1.8 pb. The probability for...

  10. NREL Bioenergy Staff Honored for Top Innovations in 2015 | Bioenergy...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Bioenergy Staff Honored for Top Innovations in 2015 May 24, 2016 Photo of a group of ten ... Transfer Excellence Awards to the bioenergy team of (from left to right) Wesley ...

  11. NREL Bioenergy Staff Honored for Top Innovations in 2015 | Awards...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Bioenergy Staff Honored for Top Innovations in 2015 May 24, 2016 Photo of a group of ten ... Transfer Excellence Awards to the bioenergy team of (from left to right) Wesley ...

  12. Feynman Center for Innovation honors top technical trailblazers

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Feynman Center honors top technical trailblazers Feynman Center for Innovation honors top technical trailblazers Breakthroughs tap Los Alamos science for commercial application, from high-performance computing to geothermal energy. July 19, 2016 Fuel Cell Performance and Durability Gary Grider (second from right) with the 2015 Richard P. Feynman Innovation Prize. Also pictured (left to right): Duncan McBranch, Chief Technology Officer of Los Alamos National Laboratory; Terry Wallace, Program

  13. Buried and Encapsulated Ducts - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Buried and Encapsulated Ducts - Building America Top Innovation Buried and Encapsulated Ducts - Building America Top Innovation photo of worker blowing insulation on ducts in an attic. Ductwork installed in unconditioned attics can significantly increase the heating and cooling costs of homes, resulting in thermal losses of 10%-45% of total space conditioning energy use. To address this problem, Building America researchers from the Consortium for Advanced Residential

  14. Energy Department Recognizes Nation's Top Green Power Programs |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Nation's Top Green Power Programs Energy Department Recognizes Nation's Top Green Power Programs November 16, 2011 - 1:08pm Addthis WASHINGTON, D.C. - The U.S. Department of Energy (DOE) today recognized four leading organizations for expanding the market for electricity produced from renewable energy sources during the 11th annual Green Power Leadership Awards in San Francisco, Calif. These organizations' innovative "green power" programs provide consumers

  15. Laboratory named a top-50 employer for Latina women

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laboratory named a top-50 employer for Latina women Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:November 2, 2016 all issues All Issues » submit Laboratory named a top-50 employer for Latina women Los Alamos is the first national laboratory to be recognized by Latina Style magazine. October 3, 2016 Leah Sanchez started her career at Los Alamos as a student. Leah Sanchez, group leader for the Human Resources Field & Central

  16. Furnace Blower Performance Improvements - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Furnace Blower Performance Improvements - Building America Top Innovation Furnace Blower Performance Improvements - Building America Top Innovation This photo shows a circular-shaped blower fan for furnaces and air conditioners. As homeowners switch on their forced-air furnaces in preparation for cold weather, they may be unaware of how furnace blowers can impact HVAC efficiency. In fact, studies show that the most common blowers have efficiencies of only 10%-15%.

  17. The top quark (20 years after the discovery)

    SciTech Connect

    Boos, Eduard; Brandt, Oleg; Denisov, Dmitri; Denisov, Sergey; Grannis, Paul

    2015-09-10

    On the twentieth anniversary of the observation of the top quark, we trace our understanding of this heaviest of all known particles from the prediction of its existence, through the searches and discovery, to the current knowledge of its production mechanisms and properties. We also discuss the central role of the top quark in the Standard Model and the windows that it opens for seeking new physics beyond the Standard Model.

  18. Los Alamos scientists win top American Physical Society prizes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Los Alamos scientists win top American Physical Society prizes Los Alamos scientists win top American Physical Society prizes Two senior scientists at Los Alamos National Lab are being honored by the American Physical Society (APS) for their fundamental contributions in nuclear physics and biophysics. October 18, 2016 Alan Perelson (left), of Los Alamos' Theoretical Biology and Biophysics group, and Joe Carlson of the Lab's Nuclear and Particle Physics, Astrophysics and Cosmology group, won two

  19. NREL Facility Named One of Nation's Top Sustainable Buildings |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy NREL Facility Named One of Nation's Top Sustainable Buildings NREL Facility Named One of Nation's Top Sustainable Buildings June 24, 2011 - 12:31pm Addthis The 222,000 sq. ft. RSF has been recognized for its innovative construction and efficiency. | Courtesy of Dennis Schroeder, National Renewable Energy Laboratory staff photographer. The 222,000 sq. ft. RSF has been recognized for its innovative construction and efficiency. | Courtesy of Dennis Schroeder, National

  20. National Residential Efficiency Measures Database - Building America Top

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Innovation | Department of Energy National Residential Efficiency Measures Database - Building America Top Innovation National Residential Efficiency Measures Database - Building America Top Innovation Image of a man insulating the ceiling of a home. Robust cost data for energy-efficiency measures provide an essential framework for transforming the housing industry to high-performance homes. These data allow for effective optimization capabilities to guide builders, researchers, HERS raters,

  1. Next Generation Advanced Framing - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Advanced Framing - Building America Top Innovation Next Generation Advanced Framing - Building America Top Innovation This photo shows advanced framing on a rim header and looking through to a house in the distance. Building America field studies involving thousands of homes have verified significant savings in energy, materials, and labor when production builders apply advanced framing techniques-exceeding $1,000 per home. Building America researchers at Partnership for

  2. Building America's Top Innovations Advance High Performance Homes |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Building America's Top Innovations Advance High Performance Homes Building America's Top Innovations Advance High Performance Homes Innovations sponsored by the U.S. Department of Energy's (DOE) Building America program and its teams of building science experts continue to have a transforming impact, leading our nation's home building industry to high-performance homes. Building America researchers have worked directly with more than 300 U.S. production home builders and

  3. Jefferson Lab Recognizes Top Small Business Subcontractor for 2008 |

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Jefferson Lab Recognizes Top Small Business Subcontractor for 2008 Jefferson Lab Recognizes Top Small Business Subcontractor for 2008 groundbreaking D.G.S. President Ruth Seeley and her husband, Don, vice president and project manager, received the 2008 Jefferson Science Associates/JLab Outstanding Small Business Subcontractor award. Photo: Greg Adams NEWPORT NEWS, Va., April 27, 2009 - D.G.S. Painting Inc., a Yorktown-based business that provides a range of custom-painting services, has

  4. Tapping Top University Draft Picks to Engineer Solar Championships |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Top University Draft Picks to Engineer Solar Championships Tapping Top University Draft Picks to Engineer Solar Championships February 2, 2012 - 3:03pm Addthis The Office of Energy Efficiency and Renewable Energy offers a variety of internships, fellowships, and scholarships in addition to the postdoctoral research awards. Current SunShot fellows pose in front of the Apollo Lunar Module at the National Air and Space Museum. | Energy Department file photo. The Office of

  5. Attic Air Sealing Guide - Building America Top Innovation | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Attic Air Sealing Guide - Building America Top Innovation Attic Air Sealing Guide - Building America Top Innovation Image showing step-by-step instructions for air sealing. One of the most effective energy measures for retrofitting homes across the United States is attic air sealing. The Building America-sponsored Guide to Attic Air Sealing provides much needed instruction essential to achieving effective energy savings while avoiding pitfalls that can lead to combustion safety and

  6. High-Efficiency Window Air Conditioners - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Window Air Conditioners - Building America Top Innovation High-Efficiency Window Air Conditioners - Building America Top Innovation This photo shows a window air conditioning unit in place in a window frame. Window air conditioners are inexpensive, portable, and can be installed by home occupants, making them a good solution for spot cooling and for installing air conditioning into homes that lack ductwork. However, window air conditioners have low minimum efficiency

  7. Groundwater, Legacy Soil Cleanup and Flood Recovery Top Lab's

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Accomplishments | Department of Energy Groundwater, Legacy Soil Cleanup and Flood Recovery Top Lab's Accomplishments Groundwater, Legacy Soil Cleanup and Flood Recovery Top Lab's Accomplishments December 23, 2014 - 12:00pm Addthis Los Alamos National Laboratory’s chromium remediation project is located in a canyon adjacent to pueblo lands. Los Alamos National Laboratory's chromium remediation project is located in a canyon adjacent to pueblo lands. A 1,000-year rain event in September

  8. HVAC Cabinet Air Leakage Test Method - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Cabinet Air Leakage Test Method - Building America Top Innovation HVAC Cabinet Air Leakage Test Method - Building America Top Innovation While HVAC installers have improved their air sealing practices to reduce the amount of air leaking at ducts and duct boots, testing showed that distribution systems still leaked at air handlers and furnace HVAC Air Leakage Fig 1 Air handler furnace cabinet with pressure taps.jpg cabinets. This has hampered the ability of HVAC

  9. Dateline Los Alamos: Top Science News for 2013

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Top Science News for 2013 Dateline Los Alamos: Top Science News for 2013 HIV vaccine, Mars water, climate change, birth of a black hole, thwarting terrorists among topics of interest Los Alamos outstanding science and technology achievements for 2013 December 24, 2013 los alamos acheivements This photo shows a laser pulse at Los Alamos National Laboratory's TRIDENT facility striking a thin foil target to produce neutrons that can be used to interrogate closed containers and determine the amount

  10. Unvented, Conditioned Attics - Building America Top Innovation | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Attics - Building America Top Innovation Unvented, Conditioned Attics - Building America Top Innovation This photo shows an attic that is conditioned (insulated) and showing ductwork. The preference for a large segment of the U.S. housing industry has been to locate HVAC systems in unconditioned attics, but this is highly inefficient. The additional heat loss and gain of ducts in unconditioned, vented attics increases energy use for heating and cooling by 10%. Additionally, duct

  11. Water Management Guide - Building America Top Innovation | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Water Management Guide - Building America Top Innovation Water Management Guide - Building America Top Innovation Cover of the EEBA Water Management Guide. As energy codes and voluntary programs such as ENERGY STAR for Homes and the DOE Zero Energy Ready Home (formerly Challenge Home) continue transforming the housing industry to high performance, better insulated and air-sealed assemblies now have substantially reduced tolerance for drying. As a result, managing bulk water flow has

  12. A new scoring function for top-down spectral deconvolution

    SciTech Connect

    Kou, Qiang; Wu, Si; Liu, Xiaowen

    2014-12-18

    Background: Top-down mass spectrometry plays an important role in intact protein identification and characterization. Top-down mass spectra are more complex than bottom-up mass spectra because they often contain many isotopomer envelopes from highly charged ions, which may overlap with one another. As a result, spectral deconvolution, which converts a complex top-down mass spectrum into a monoisotopic mass list, is a key step in top-down spectral interpretation. Results: In this paper, we propose a new scoring function, L-score, for evaluating isotopomer envelopes. By combining L-score with MS-Deconv, a new software tool, MS-Deconv+, was developed for top-down spectral deconvolution. Experimental results showed that MS-Deconv+ outperformed existing software tools in top-down spectral deconvolution. Conclusions: L-score shows high discriminative ability in identification of isotopomer envelopes. Using L-score, MS-Deconv+ reports many correct monoisotopic masses missed by other software tools, which are valuable for proteoform identification and characterization.

  13. Spin Measurement in Top Quark Events at the LHC

    SciTech Connect

    Linacre, Jacob

    2015-01-01

    Measurements of polarisation and spin correlations are presented in events with top quarks produced in pp collisions at the LHC. The data correspond to integrated luminosities of $5 fb^{-1}$ at $\\sqrt{s}$ = 7 TeV and 20 $fb^{-1}$ at $\\sqrt{s}$ = 8 TeV collected with the ATLAS and CMS detectors. The top quark polarization is measured in both single top quark production in the t-channel and $t\\bar{t}$ pair-production, from the angular distributions of charged leptons in the rest frame of their parent top quark. The spin correlations are measured in $t\\bar{t}$ events using various angular distributions of the decay products. The measurements are made using both template fitting methods and by unfolding the distributions to the parton-level, where differential measurements with respect to the invariant mass, rapidity, and transverse momentum of the $t\\bar{t}$ system are also made. The spin correlation measurements are used to search for new physics in the form of a light top squark or an anomalous top quark chromo-magnetic dipole moment. All measurements are found to be in agreement with predictions of the standard model.

  14. A new scoring function for top-down spectral deconvolution

    DOE PAGES [OSTI]

    Kou, Qiang; Wu, Si; Liu, Xiaowen

    2014-12-18

    Background: Top-down mass spectrometry plays an important role in intact protein identification and characterization. Top-down mass spectra are more complex than bottom-up mass spectra because they often contain many isotopomer envelopes from highly charged ions, which may overlap with one another. As a result, spectral deconvolution, which converts a complex top-down mass spectrum into a monoisotopic mass list, is a key step in top-down spectral interpretation. Results: In this paper, we propose a new scoring function, L-score, for evaluating isotopomer envelopes. By combining L-score with MS-Deconv, a new software tool, MS-Deconv+, was developed for top-down spectral deconvolution. Experimental results showedmore » that MS-Deconv+ outperformed existing software tools in top-down spectral deconvolution. Conclusions: L-score shows high discriminative ability in identification of isotopomer envelopes. Using L-score, MS-Deconv+ reports many correct monoisotopic masses missed by other software tools, which are valuable for proteoform identification and characterization.« less

  15. Nanofabrication of sharp diamond tips by e-beam lithography and inductively coupled plasma reactive ion etching.

    SciTech Connect

    Moldovan, N.; Divan, R.; Zeng, H.; Carlisle, J. A.; Advanced Diamond Tech.

    2009-12-07

    Ultrasharp diamond tips make excellent atomic force microscopy probes, field emitters, and abrasive articles due to diamond's outstanding physical properties, i.e., hardness, low friction coefficient, low work function, and toughness. Sharp diamond tips are currently fabricated as individual tips or arrays by three principal methods: (1) focused ion beam milling and gluing onto a cantilever of individual diamond tips, (2) coating silicon tips with diamond films, or (3) molding diamond into grooves etched in a sacrificial substrate, bonding the sacrificial substrate to another substrate or electrodepositing of a handling chip, followed by dissolution of the sacrificial substrate. The first method is tedious and serial in nature but does produce very sharp tips, the second method results in tips whose radius is limited by the thickness of the diamond coating, while the third method involves a costly bonding and release process and difficulties in thoroughly filling the high aspect ratio apex of molding grooves with diamond at the nanoscale. To overcome the difficulties with these existing methods, this article reports on the feasibility of the fabrication of sharp diamond tips by direct etching of ultrananocrystalline diamond (UNCD{reg_sign}) as a starting and structural material. The UNCD is reactive ion etched using a cap-precursor-mask scheme. An optimized etching recipe demonstrates the formation of ultrasharp diamond tips ({approx} 10 nm tip radius) with etch rates of 650 nm/min.

  16. Bench-Top Engine System for Fast Screening of Alternative Fuels...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bench-Top Engine System for Fast Screening of Alternative Fuels and Fuel Additives Bench-Top Engine System for Fast Screening of Alternative Fuels and Fuel Additives A bench-top ...

  17. The use of computer simulation to investigate tip shape and point contact effects during scanning tunneling microscopy of supported nanostructures

    SciTech Connect

    Mark, Geza I.; Biro, Laszlo P.; Gyulai, Jozsef; Thiry, Paul A.; Lambin, Philippe

    1999-09-30

    A recently developed computer code [1] is used to investigate effects which may arise during the STM investigation of supported nanostructures, like carbon nanotubes. The effects of tip geometry and point contact imaging are studied. The calculations show that while the magnitude of the tunnel current is determined by the tip-nanotube tunnel gap, the asymmetry of the tip {+-} current is influenced by the nanotube-support tunnel gap. The results obtained from simulation are compared with experimental data.

  18. Colorado Start-Up Awarded First 'America's Next Top Energy Innovator...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Colorado Start-Up Awarded First 'America's Next Top Energy Innovator' Agreement Colorado Start-Up Awarded First 'America's Next Top Energy Innovator' Agreement May 20, 2011 - ...

  19. Advanced Combustion Engine R&D: Goals, Strategies, and Top Accomplishm...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Engine R&D: Goals, Strategies, and Top Accomplishments Advanced Combustion Engine R&D: Goals, Strategies, and Top Accomplishments PDF icon advcombustiongoals.pdf More Documents &...

  20. VariableR reclustering in multiple top quark events - Oral Presentatio...

    Office of Scientific and Technical Information (OSTI)

    VariableR reclustering in multiple top quark events - Oral Presentation Citation Details In-Document Search Title: VariableR reclustering in multiple top quark events - Oral...

  1. From Shop Floor to Top Floor: Best Business Practices in Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Shop Floor to Top Floor: Best Business Practices in Energy Efficiency Jump to: navigation, search Tool Summary LAUNCH TOOL Name: From Shop Floor to Top Floor: Best Business...

  2. Top quark physics at the Tevatron results and prospects

    SciTech Connect

    K. Sliwa

    2002-10-16

    The methodology of CDF and D0 top quark analyses and their underlying assumptions are summarized. The CDF and D0 top mass averages, obtained from measurements in several channels and based on about 100 pb{sup -1} of data from p{bar p} collisions at {radical}s = 1.8 TeV collected by each experiment in Run-I, are: M{sub t} = 176.1 {+-} 4.0(stat) {+-} 5.1(syst) GeV/c{sup 2} and M{sub t} = 172.1 {+-} 5.2(stat) {+-} 4.9(syst) Gev/C{sup 2}, respectively. The combined Tevatron measurement of the top quark mass is M{sub t} = 174.3 {+-} 3.2(stat) {+-} 4.0(syst) GeV/c{sup 2}. The CDF measurement of the t{bar t} cross section (assuming M{sub t} = 175 GeV/c{sup 2}) is {sigma}{sub tt} = 6.5 {+-} {sub 1.4}{sup 1.6} pb, and the D0 value (assuming M{sub t} = 172.1 GeV/c{sup 2}) is {sigma}{sub tt} = 5.9 {+-} 1.7 pb. In anticipation of much larger statistics, prospects for top physics in Tevatron Run-II are summarized. The fact that top quark analyses are among the best windows to physics beyond the Standard Model is emphasized.

  3. Search for baryon number violation in top-quark decays

    DOE PAGES [OSTI]

    Chatrchyan, Serguei

    2014-02-20

    A search for baryon number violation (BNV) in top-quark decays is performed using pp collisions produced by the LHC at sqrt(s) = 8 TeV. The top-quark decay considered in this search results in one light lepton (muon or electron), two jets, but no neutrino in the final state. Data used for the analysis were collected by the CMS detector and correspond to an integrated luminosity of 19.5 inverse femtobarns. The event selection is optimized for top quarks produced in pairs, with one undergoing the BNV decay and the other the standard model hadronic decay to three jets. No significant excessmore » of events over the expected yield from standard model processes is observed. The upper limits at 95% confidence level on the branching fraction of the BNV top-quark decay are calculated to be 0.0016 and 0.0017 for the muon and the electron channels, respectively. Assuming lepton universality, an upper limit of 0.0015 results from the combination of the two channels. These limits are the first that have been obtained on a BNV process involving the top quark.« less

  4. Top quark mass measurement using the template method at CDF

    SciTech Connect

    Aaltonen, T; Alvarez Gonzalez, B; Amerio, S; Amidei, D; Anastassov, A; Annovi, A; Antos, J; Apollinari, G; Appel, J A; Apresyan, A; Arisawa, T

    2011-06-03

    We present a measurement of the top quark mass in the lepton+jets and dilepton channels of tt? decays using the template method. The data sample corresponds to an integrated luminosity of 5.6 fb-1 of pp? collisions at Tevatron with ?s = 1.96 TeV, collected with the CDF II detector. The measurement is performed by constructing templates of three kinematic variables in the lepton+jets and two kinematic variables in the dilepton channel. The variables are two reconstructed top quark masses from different jets-to-quarks combinations and the invariant mass of two jets from the W decay in the lepton+jets channel, and a reconstructed top quark mass and mT2, a variable related to the transverse mass in events with two missing particles, in the dilepton channel. The simultaneous fit of the templates from signal and background events in the lepton+jets and dilepton channels to the data yields a measured top quark mass of Mtop = 172.11.1 (stat)0.9 (syst) GeV/c2.

  5. Numerical simulation of the shock-tip leakage vortex interaction in a HPC front stage

    SciTech Connect

    Hoeger, M.; Fritsch, G.; Bauer, D.

    1999-07-01

    For a single-stage transonic compressor rig at the TU Darmstadt, three-dimensional viscous simulations are compared to L2F measurements and data from the EGV leading edge instrumentation to demonstrate the predictive capability of the Navier-Stokes code TRACE{_}S. In a second step the separated regions at the blade tip are investigated in detail to gain insight into the mechanisms of tip leakage vortex-shock interaction at operating points close to stall, peak efficiency, and choke. At the casing the simulations reveal a region with axially reversed flow, leading to a rotationally asymmetric displacement of the outermost stream surface and a localized additional pitch-average blockage of approximately 2 percent. Loss mechanisms and streamline patterns deduced from the simulation are also discussed. Although the flow is essentially three-dimensional, a simple model for local blockage from tip leakage is demonstrated to significantly improve two-dimensional simulations on S1-surfaces.

  6. Measurement of the three-dimensional tip region flow field in an axial compressor

    SciTech Connect

    Stauter, R.C. )

    1993-07-01

    A two-color, five-beam LDV system has been configured to make simultaneous three-component velocity measurements of the flow field in a two-stage axial compressor model. The system has been used to make time-resolved measurements both between compressor blade rows and within the rotating blade passages in an axial compressor. The data show the nature and behavior of the complex, three-dimensional flow phenomena present in the tip region of a compressor as the convect downstream. In particular, the nature of the tip leakage vortex is apparent, being manifested by high blockage as well as the expected vortical motion. The data indicate that the radial flows associated with the tip leakage vortex begin to decrease while within the rotor passage, and that they temporarily increase aft of the passage.

  7. Humidity effects on tip-induced polarization switching in lithium niobate

    SciTech Connect

    Ievlev, A. V.; Morozovska, A. N.; Shur, V. Ya.; Kalinin, S. V.

    2014-03-03

    In the last several decades, ferroelectrics have attracted much attention as perspective materials for nonlinear optics and data storage devices. Scanning probe microscopy (SPM) has emerged as a powerful tool both for studies of domain structures with nanoscale spatial resolution and for writing the isolated nanodomains by local application of the electric field. Quantitative analysis of the observed behavior requires understanding the role of environmental factors on imaging and switching process. Here, we study the influence of the relative humidity in the SPM chamber on tip-induced polarization switching. The observed effects are attributed to existence of a water meniscus between the tip and the sample surface in humid atmosphere. These results are important for a deeper understanding of complex investigations of ferroelectric materials and their applications and suggest the necessity for fundamental studies of electrocapillary phenomena at the tip-surface junction and their interplay with bias-induced materials responses.

  8. Humidity effects on tip-induced polarization switching in lithium niobate

    SciTech Connect

    Ievlev, Anton; Morozovska, A. N.; Shur, Vladimir Ya.; Kalinin, Sergei V

    2014-01-01

    In the last several decades, ferroelectrics have attracted much attention as perspective materials for nonlinear optics and data storage devices. Scanning probe microscopy (SPM) has emerged as a powerful tool both for studies of domain structures with nanoscale spatial resolution and for writing the isolated nanodomains by local application of the electric field. Quantitative analysis of the observed behavior requires understanding the role of environmental factors on imaging and switching process. Here we study the influence of the relative humidity in the SPM chamber on tip-induced polarization switching. The observed effects are attributed to existence of a water meniscus between the tip and the sample surface in humid atmosphere. These results are important for a deeper understanding of complex investigations of ferroelectric materials and their applications, and suggest the necessity for fundamental studies of electrocapillary phenomena at the tip-surface junction and their interplay with bias-induced materials responses.

  9. Eddy current probe with foil sensor mounted on flexible probe tip and method of use

    DOEpatents

    Viertl, John R. M.; Lee, Martin K.

    2001-01-01

    A pair of copper coils are embedded in the foil strip. A first coil of the pair generates an electromagnetic field that induces eddy currents on the surface, and the second coil carries a current influenced by the eddy currents on the surface. The currents in the second coil are analyzed to obtain information on the surface eddy currents. An eddy current probe has a metal housing having a tip that is covered by a flexible conductive foil strip. The foil strip is mounted on a deformable nose at the probe tip so that the strip and coils will conform to the surface to which they are applied.

  10. Temporal evolution of bubble tip velocity in classical Rayleigh-Taylor instability at arbitrary Atwood numbers

    SciTech Connect

    Liu, W. H.; HEDPS and CAPT, Peking University, Beijing 100871 ; Wang, L. F.; Ye, W. H.; Institute of Applied Physics and Computational Mathematics, Beijing 100088; Department of Physics, Zhejiang University, Hangzhou 310027 ; He, X. T.; Institute of Applied Physics and Computational Mathematics, Beijing 100088

    2013-06-15

    In this research, the temporal evolution of the bubble tip velocity in Rayleigh-Taylor instability (RTI) at arbitrary Atwood numbers and different initial perturbation velocities with a discontinuous profile in irrotational, incompressible, and inviscid fluids (i.e., classical RTI) is investigated. Potential models from Layzer [Astrophys. J. 122, 1 (1955)] and perturbation velocity potentials from Goncharov [Phys. Rev. Lett. 88, 134502 (2002)] are introduced. It is found that the temporal evolution of bubble tip velocity [u(t)] depends essentially on the initial perturbation velocity [u(0)]. First, when the u(0)tip velocity increases smoothly up to the asymptotic velocity (u{sup asp}) or terminal velocity. Second, when C{sup (1)}u{sup asp}?u(0)tip velocity increases quickly, reaching a maximum velocity and then drops slowly to the u{sup asp}. Third, when C{sup (2)}u{sup asp}?u(0)tip velocity decays rapidly to a minimum velocity and then increases gradually toward the u{sup asp}. Finally, when u(0)?C{sup (3)}u{sup asp}, the bubble tip velocity decays monotonically to the u{sup asp}. Here, the critical coefficients C{sup (1)},C{sup (2)}, and C{sup (3)}, which depend sensitively on the Atwood number (A) and the initial perturbation amplitude of the bubble tip [h(0)], are determined by a numerical approach. The model proposed here agrees with hydrodynamic simulations. Thus, it should be included in applications where the bubble tip velocity plays an important role, such as the design of the ignition target of inertial confinement fusion where the Richtmyer-Meshkov instability (RMI) can create the seed of RTI with u(0)?u{sup asp}, and stellar formation and evolution in astrophysics where the deflagration wave front propagating outwardly from the star is subject to the combined RMI and RTI.

  11. On the Verge of a Hydrogen Tipping Point? | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    On the Verge of a Hydrogen Tipping Point? On the Verge of a Hydrogen Tipping Point? October 12, 2016 - 12:40pm Addthis David Friedman David Friedman Assistant Secretary for Energy Efficiency and Renewable Energy (Acting) Across the country this past week, scientists and engineers have been celebrating National Hydrogen and Fuel Cell Day. Aptly chosen to represent the atomic weight of hydrogen (1.008), National Hydrogen and Fuel Cell Day was celebrated for the first time on October 8, 2015 and

  12. Electrostatic removal of lithium fluoride from field-emitter tips at elevated temperatures

    SciTech Connect

    Panitz, J.A. )

    1994-09-01

    The electrostatic removal of lithium fluoride (LiF) from field-emitter tips has been visualized at elevated temperatures in the transmission electron microscope (TEM). The apex of a field-emitter tip coated with [similar to]1500 A of LiF provides a unique substrate for observing the removal process in the TEM in real time, and its curvature generates the required electrostatic field strength. The influence of the imaging electron beam on coating morphology has been visually assessed. A LiF coating can tolerate an electron dose of [similar to]2000 [ital e][sup [minus

  13. Tricks, Treats and Tips for a Ghoulishly Low Energy Bill | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Tricks, Treats and Tips for a Ghoulishly Low Energy Bill Tricks, Treats and Tips for a Ghoulishly Low Energy Bill October 24, 2016 - 9:49am Addthis In 2013, the Energy.gov team celebrated National Energy Action Month by carving some energy pumpkins after work. | Video by Matty Greene, Energy Department. The Energy.gov Content Team The Energy.gov Content Team Office of Public Affairs How can I participate? Download our energy-themed jack-o-lantern carving stencils to put a geeky spin

  14. Energy Saver Tax Tips: Get Money Back for Buying, Charging Plug-in Electric

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicles | Department of Energy Saver Tax Tips: Get Money Back for Buying, Charging Plug-in Electric Vehicles Energy Saver Tax Tips: Get Money Back for Buying, Charging Plug-in Electric Vehicles March 21, 2016 - 4:58pm Addthis All-electric and plug-in hybrid cars purchased in 2015 may be eligible for federal and state income tax credits. Photo by Dennis Schroeder/NREL All-electric and plug-in hybrid cars purchased in 2015 may be eligible for federal and state income tax credits. Photo by

  15. Cut Gas Costs This Holiday Traveling Season with Three Easy Tips |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Cut Gas Costs This Holiday Traveling Season with Three Easy Tips Cut Gas Costs This Holiday Traveling Season with Three Easy Tips November 26, 2013 - 9:23am Addthis Turning off your engine while waiting in the parking lot is a great way to save money on gas. | Photo courtesy of Kristy Keel-Blackmon, NREL/21196. Turning off your engine while waiting in the parking lot is a great way to save money on gas. | Photo courtesy of Kristy Keel-Blackmon, NREL/21196. Jason

  16. NERSC Users Learn Code Optimization Tips and Tricks at 1st Hackathon

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Users Learn Code Optimization Tips and Tricks at 1st Hackathon NERSC Users Learn Code Optimization Tips and Tricks at 1st Hackathon March 6, 2015 A one-day "Hack-A-Thon" held February 25 at NERSC's Oakland Scientific Facility during the annual NERSC Users Group (NUG) meeting has been deemed a rousing success by organizers and attendees alike. The event was designed to give users the opportunity to optimize a computationally intensive piece of code-either their own or a sample kernel

  17. Measurement of the top quark mass in the dilepton channel

    SciTech Connect

    Abazov, V.M.; Abbott, B.; Abolins, M.; Acharya, B.S.; Adams, M.; Adams, T.; Agelou, M.; Aguilo, E.; Ahn, S.H.; Ahsan, M.; Alexeev, G.D.; /Buenos Aires U. /Rio de Janeiro, CBPF /Rio de Janeiro State U. /Sao Paulo, IFT /Alberta U. /Simon Fraser U. /York U., Canada /McGill U. /Hefei, CUST /Andes U., Bogota /Charles U.

    2006-09-01

    We present a measurement of the top quark mass in the dilepton channel based on approximately 370 pb{sup -1} of data collected by the D0 experiment during Run II of the Fermilab Tevatron collider. We employ two different methods to extract the top quark mass. We show that both methods yield consistent results using ensemble tests of events generated with the D0 Monte Carlo simulation. We combine the results from the two methods to obtain a top quark mass m{sub t} = 178.1 {+-} 8.2 GeV. The statistical uncertainty is 6.7 GeV and the systematic uncertainty is 4.8 GeV.

  18. Neural Networks for Analysis of Top Quark Production

    SciTech Connect

    B. Abbott et al.

    1999-08-04

    Neural networks (NNs) provide a powerful and flexible tool for selecting a signal from a larger background. The D0 collaboration has used them extensively in studying t{anti t} decays. NNs were essential to the measurement of the t{anti t} production cross section in the all-jets channel (t{anti t} {yields} b {anti b}qqqq), and were also used in the measurement of the mass of the top quark in the lepton+jets channel (t{anti t} {yields} b{anti b}l{nu}q{anti q}). This paper will describe two new applications of neural networks to top quark analysis: the search for single top quark production, and an effort to increase the sensitivity in the dilepton channel t{anti t} {yields} b{anti b}e{anti {mu}}{nu}{anti {nu}} beyond that achieved in the published analysis.

  19. Building America Top Innovations 2013 Profile - Zero Energy-Ready

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Single-Family Homes | Department of Energy Building America Top Innovations 2013 Profile - Zero Energy-Ready Single-Family Homes Building America Top Innovations 2013 Profile - Zero Energy-Ready Single-Family Homes Many Building America teams (ARBI, BA-PIRC, BSC, CARB, IBACOS, NorthernSTAR, PHI, etc.) have worked with home builders to design and test zero-energy-ready homes. ba_in_2.1.6_zeroenergyhomes_100213.pdf (807.25 KB) More Documents & Publications Zero Energy-Ready Single-Family

  20. Top quark mass measurement at CDF Run-II

    SciTech Connect

    T. Maruyama

    2004-05-11

    CDF has resumed the top quark mass measurement with upgraded detectors and Tevatron complex. High statistics should allow us to determine the top mass with an uncertainty of a few GeV/c{sup 2} by the end of Run II. The current measured value, using an integrated luminosity of {approx} 108 pb{sup -1}, is 177.5{sub -9.4}{sup +12.7} (stat.) {+-} 7.1(syst.) GeV/c{sup 2} (lepton + jets with one b-jet tagged mode: the current best mode), which is consistent with RunI measurements.