National Library of Energy BETA

Sample records for technology choices determined

  1. Vehicle Technologies Office Merit Review 2015: ParaChoice: Parametric Vehicle Choice Modeling

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation given by Sandia National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about ParaChoice:...

  2. Technology choice in a least-cost expansion analysis framework: Implications for state regulators

    SciTech Connect

    Guziel, K.A.; South, D.W.

    1990-01-01

    It is inevitable that new power plants will need to be constructed in the near future; however, it is unclear which technologies will be selected for these new plants. In a study for the US Department of Energy, the impacts of fuel prices, length of the planning period, and the characteristics of the generating system were examined for their influence on technology choice in 10 representative power pools. It was determined that natural gas combined-cycle technology was generally preferred for base-load and intermediate/cycling capacity when gas prices are low and the planning period is short (10 years). Integrated coal gasification combined-cycle plants were selected to serve most base-load requirements under other conditions. One aspect often overlooked in making a least-cost technology choice is system reliability: nonoptimal technology choices call be made if alternative expansion plans do not have the same level of reliability when discounted system costs are compared. Utilities have become capital averse due to a multitude of regulatory, market, and supply issues. Utilities are looking at natural gas technologies, since they offer rapid construction/deployment, low capital investment, and higher availability than coal-fired technologies. Of concern to state regulators is how to evaluate a least-cost plan. Key parameters studied were based on the following: (1) What is the impact of alternative gas projections on technology choice (2) What influence does the planning horizon (10 versus 30 years) have on technology choice (3) How important are existing system characteristics (e.g., mix of technologies, operating costs, load shape) on technology choice This paper summarizes the analysis framework and presents results for two power pools: Power Pool 1, the American Electric Power (AEP) service territory, and Power Pool 16, with all the utilities in Florida. 7 refs., 17 figs., 2 tabs. (JF)

  3. Technology choice in a least-cost expansion analysis framework: Effects of gas price, planning period, and system characteristics

    SciTech Connect

    Guziel, K.A.; South, D.W.; Bhatarakamol, S.; Poch, L.A.

    1990-04-01

    The current outlook for new capacity additions by electric utilities is uncertain and tenuous. The fundamental question about the additional capacity requirements center on technology choice and the factors influencing the decision process. Instead of building capital-intensive power plants, utilities have begun relying on natural gas technologies, which permit rapid construction and deployment and low capital investment. Of concern to policymakers and utility planners are the following questions: (1) What is the impact of alternative gas price projections on technology choice (2) What influence does the planning horizon have on technology choice (3) How important are existing system characteristics on technology choice (4) What effect does capital cost, when combined with other technology characteristics in a capacity expansion framework, have on technology choice In this study Argonne National Laboratory examined the impact of these concerns on technology choices in 10 representative power pools with a dynamic optimization expansion model, the Wien Automatic System Planning Package (WASP). At least-cost expansion plan was determined for each power pool with three candidate technologies--natural gas combustion turbine technology (GT), natural gas combined-cycle technology (NGCC), and integrated gasification combined-cycle technology (IGCC)--three alternative fuel price tracks, and two planning periods (10-yr versus 30-yr optimization) between the years 1995 and 2025. The three fuel price tracks represented scenarios for low, medium, and high gas prices. Sensitivity analyses were conducted on IGCC capital cost and unserved energy costs. 21 refs., 79 figs., 21 tabs.

  4. Fairness hypothesis and managing the risks of societal technology choices

    SciTech Connect

    Cantor, R.; Rayner, S.

    1986-08-01

    Much of the literature on risk perception and management has asked how society should resolve the question, ''How safe is safe enough'' There has been political and technical disagreement over the types of answers that may be given, as well as over the social values attached to perceived probabilities and magnitudes of various outcomes. Despite controversy, there seems to have been a large measure of consensus that, ''How safe is safe enough'' is the right question to ask. This paper sets out to question that assumption. Various ingenious techniques of risk analysis have sought to discover the real risks inherent in various activities, but from a sociocultural viewpoint it can be seen that no single answer can be given to the problem of adequate safety in a complex society which contains a wide variety of perceptual biases about danger, expectations of the good life, and levels of demand for safety. The paper argues that, from a societal risk-management perspective, we should be addressing a different range of questions that views societal risk as a whole rather than as the sum of individual hazards. Resolving the question, ''How safe is safe enough'' is less important in making societal technology choices than ''How fair is safe enough.'' A recent empirical pilot study is reported which explored the fairness hypotheses in the context of nuclear power. The results indicate that the process of technology choice should recognize explicitly the preferred principles different parties hold with respect to obtaining consent from those affected by the risks, distributing the liabilities, and justifying trust in the relevant institutions. The paper closes with a discussion of future prospects for the fairness approach in areas such as noxious facility siting.

  5. Vehicle Technologies Office Merit Review 2014: ParaChoice: Parametric Vehicle Choice Modeling

    Energy.gov [DOE]

    Presentation given by Sandia National Laboratories at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about parametric...

  6. Categorical Exclusion Determinations: Energy Technology Engineering Center

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Energy Technology Engineering Center Categorical Exclusion Determinations: Energy Technology Engineering Center Categorical Exclusion Determinations issued by Energy Technology Engineering Center. DOCUMENTS AVAILABLE FOR DOWNLOAD No downloads found for this office.

  7. Vehicle Technologies Office Merit Review 2016: ParaChoice Model

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation given by Sandia National Laboratory (SNL) at the 2016 DOE Vehicle Technologies Office and Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting about Analysis

  8. Human choice and climate change. Volume 2: Resources and technology

    SciTech Connect

    Rayner, S.; Malone, E.L.

    1997-12-31

    Foreward: Preface; Introduction; The natural science of global climate change; Land and water use; Coastal zones and oceans; Energy and industry; Energy and social systems; Technological change; and Sponsoring organizations, International Advisory Board, and project participants.

  9. Categorical Exclusion Determinations: Advanced Technology Vehicles

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Loan Program | Department of Energy Technology Vehicles Manufacturing Loan Program Categorical Exclusion Determinations: Advanced Technology Vehicles Manufacturing Loan Program Categorical Exclusion Determinations issued by Advanced Technology Vehicles Manufacturing Loan Program. DOCUMENTS AVAILABLE FOR DOWNLOAD September 6, 2011 CX-006488: Categorical Exclusion Determination Chrysler Group LLC, Revised Specific Project Application 2, Retooling, Reequipping and Engineering

  10. CABLE TECHNOLOGY LABORATORIES, INC. DETERMINATION OF THRESHOLD...

    Office of Scientific and Technical Information (OSTI)

    CABLE TECHNOLOGY LABORATORIES, INC. DETERMINATION OF THRESHOLD AND MAXIMUM OPERATING ELECTRIC STRESSES FOR SELECTED HIGH VOLTAGE INSULATIONS Investigation of Aged Polymeric ...

  11. Technology choice in a least-cost expansion analysis framework: The impact of gas prices, planning horizon, and system characteristics

    SciTech Connect

    Guziel, K.A.; South, D.W.

    1990-01-01

    The current outlook for new capacity addition by electric utilities is uncertain and tenuous. Regardless of the amount, it is inevitable that new capacity will be needed in the 1990s and beyond. The fundamental question about the addition capacity requirements centers on technology choice and the factors influencing the decision process. We examined technology choices in 10 representative power pools with a dynamic optimization expansion model, the Wien Automatic System Planning (WASP) Package. These 10 power pools were determined to be representative on the basis of a cluster analysis conducted on all 26 power pools in the United States. A least-cost expansion plan was determined for each power pool with three candidate technologies--natural gas combustion turbine (CT), natural gas combined cycle (NGCC), and integrated gasification combined cycle (IGCC)--three alternative gas price tracks, and two planning horizons between the years 1995 and 2020. This paper summarizes the analysis framework and presents results for Power Pool 1, the American Electric Power (AEP) service territory. 7 refs., 9 figs., 1 tab.

  12. The fairness hypothesis and managing the risks of societal technology choices

    SciTech Connect

    Cantor, R.; Rayner, S.

    1987-01-01

    Much of the literature on risk perception and management published over the last few years has asked how society should resolve the question, ''How safe is safe enough.'' This paper argues that, from a societal risk-management perspective, we should be addressing a different range of questions that views societal risk as a whole rather than as the sum of individual hazards. Resolving the question, ''How safe is safe enough.'' is less important in making societal technology choices than ''How fair is safe enough.'' A recent empirical pilot study is reported which explored the fairness hypothesis in the context of nuclear power. The results indicate that the process of technology choice should recognize explicitly the preferred principles different parties hold with respect to obtaining consent from those affected by the risks, distributing the liabilities, and justifying trust in the relevant institutions. The paper closes with a discussion of future prospects for the fairness approach to areas such as noxious facility siting.

  13. Role of liability preferences in societal technology choices: results of a pilot study

    SciTech Connect

    Cantor, R.; Rayner, S.; Braid, B.

    1985-01-01

    At the 1984 Annual Meeting of the Society for Risk Analysis, Steve Rayner presented a paper that challenged the conventional wisdom of risk management research. In that paper, he argued that resolving the question, ''How safe is safe enough.'' is less important in making societal technology choices than ''How fair is safe enough.'' Adopting the fairness question as the concern of risk management would imply that the process of technology choice explicitly recognize the preferred principles different parties hold with respect to obtaining consent from those affected by the risks, distributing the liabilities, and justifying trust in the relevant institutions. This paper discusses a recent empirical pilot study which explored the fairness hypothesis in the context of nuclear power. Individual interviews and focus groups were conducted to examine whether or not preferred principles for liability distributions were consistent with those suggested by the cultural characteristics of the constituency. The results suggest that for this type of societal technology choice, violation of these preferred principles may be a major source of the conflict between different constituencies. Additionally, the study contributes towards the development of a new approach in risk management that combines the cultural model of risk perceptions with the decision-theoretic approaches found in economics and psychology.

  14. The impact of energy prices on technology choice in the United States steel industry

    SciTech Connect

    Karlson, S.H. . Dept. of Economics); Boyd, G. )

    1991-01-01

    In the last thirty years US steel producers have replaced their aging open hearth steel furnaces with basic oxygen or large electric arc furnaces. This choice of technology leads to the opportunity to substitute electricity for fossil fuels as a heat source. We extend earlier research to investigate whether or not energy prices affect this type of technology adoption as predicted by economic theory. The econometric model uses the seemingly unrelated Tobit'' method to capture the effects of the industry's experience with both technologies, technical change, and potential cost reductions, as well as energy prices, on adoption. When we include the prices of electricity and coking coal as explanatory variables, the four energy price coefficients have the signs predicted by the law of demand. The two price coefficients have a statistically significant effect on adoption of basic oxygen furnaces. The inclusion of energy prices leads to significantly more efficient estimates of other coefficients in the model. 19 refs., 3 tabs.

  15. A Proposed Methodology to Determine the Leverage Impacts of Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    A Proposed Methodology to Determine the Leverage Impacts of Technology Deployment Programs 2008 A Proposed Methodology to Determine the Leverage Impacts of Technology Deployment ...

  16. Section 3116 Determination for Idaho Nuclear Technology and Engineerin...

    Office of Environmental Management (EM)

    by Secretary Samuel W. Bodman Section 3116 Determination for Idaho Nuclear Technology and Engineering Center Tank Farm Facility, signed by Secretary Samuel W. Bodman Section 3116 ...

  17. Categorical Exclusion Determinations: National Energy Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Laboratory September 9, 2014 CX-012155: Categorical Exclusion Determination Subsea High Voltage Direct Current Connectors for Environmentally Safe and Reliable Powering of UDW... ...

  18. The Impact of Near-term Climate Policy Choices on Technology and Emissions Transition Pathways

    SciTech Connect

    Eom, Jiyong; Edmonds, James A.; Krey, Volker; Johnson, Nils; Longden, Thomas; Luderer, Gunnar; Riahi, Keywan; Van Vuuren, Detlef

    2015-01-01

    This paper explores the implications of delays associated with currently formulated climate policies (compared to optimal policies) for long-term transition pathways to limit climate forcing to 450ppm CO2e on the basis of the AMPERE Work Package 2 model comparison study. The paper highlights the critical importance of the 2030-2050 period for ambitious mitigation strategies. In this period, the most rapid shift to non-greenhouse gas emitting technology occurs. In the delayed response emissions mitigation scenarios, an even faster transition rate in this period is required to compensate for the additional emissions before 2030. Our physical deployment measures indicate that, without CCS, technology deployment rates in the 2030-2050 period would become considerably high. Yet the presence of CCS greatly alleviates the challenges to the transition particularly after the delayed climate policies. The results also highlight the critical role that bioenergy and CO2 capture and storage (BECCS) could play. If this technology is available, transition pathways exceed the emissions budget in the mid-term, removing the excess with BECCS in the long term. Excluding either BE or CCS from the technology portfolio implies that emission reductions need to take place much earlier.

  19. How fair is safe enough. The cultural approach to societal technology choice

    SciTech Connect

    Rayner, S.; Cantor, R.

    1987-03-01

    This paper consists of an argument and a pilot study. First is a general, perhaps philosophical, argument against the National Academy's viewpoint that dealing with risk is a two-stage process consisting of (a) assessment of facts, and (b) evaluation of facts in sociopolitical context. They argue that societal risk intrinsically revolves around social relations as much as around evaluations of probability. Second, they outline one particular approach to analyzing societal risk management styles. They call this the fairness hypothesis. Rather than focusing on probabilities and magnitudes of undesired events, this approach emphasizes societal preferences for principles of achieving consent to a technology, distributing liabilities, and investing trust in institutions. Conflict rather than probability is the chief focus of this approach to societal risk management. This view is illustrated by a recent empirical pilot study that explored the fairness hypothesis in the context of new nuclear technologies.

  20. Vehicle Technologies Office Merit Review 2014: Alternative Fuel Market Development Program- Forwarding Wisconsin’s Fuel Choice

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation given by Wisconsin Department of Administration at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about...

  1. Vehicle Technologies Office Merit Review 2014: Consumer-Segmented Vehicle Choice Modeling: the MA3T Model

    Energy.gov [DOE]

    Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about consumer...

  2. Timeline for Customer Choices

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Revised September 28, 2015 TIMELINE FOR CUSTOMER CHOICES 2011 AND BEYOND - RECURRING CHOICES 1) Recurring Choices by Notice Deadlines: The choices below are made according to the...

  3. A Proposed Methodology to Determine the Leverage Impacts of Technology Deployment Programs 2008

    Energy.gov [DOE]

    This report contains a proposed methodology to determine the leverage impacts of technology deployment programs for the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy.

  4. Basis for Section 3116 Determination for the Idaho Nuclear Technology and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Engineering Center Tank Farm Facility at the Idaho National Laboratory | Department of Energy Basis for Section 3116 Determination for the Idaho Nuclear Technology and Engineering Center Tank Farm Facility at the Idaho National Laboratory Basis for Section 3116 Determination for the Idaho Nuclear Technology and Engineering Center Tank Farm Facility at the Idaho National Laboratory This 3116 Basis Document addresses the disposal of stabilized residuals in the TFF, and the TFF tank system, and

  5. Technologies

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technologies Technologies Scientists and engineers at Los Alamos have developed a variety of advanced technologies that anticipate-affect, detect, and neutralize & mitigate all types of explosive threats. v Technologies Since its inception in 1943, Los Alamos National Laboratory has been a driving force in explosives science. Scientists and engineers at Los Alamos have developed a variety of advanced technologies that anticipate, detect, and mitigate all types of explosive threats. ANDE:

  6. Determination of technology transfer requirements for enhanced oil recovery. Final report

    SciTech Connect

    Wilson, T.D.; Scott, J.P.

    1980-09-01

    A detailed field study was conducted to determine the technical information needs of current and potential users of enhanced oil recovery data. Under the direction of the Bartlesville Energy Technology Center (BETC), the study (1) identifies groups which have a need for EOR-related information, (2) delineate the specific information needs of each user-group, and (3) outlines methods for improved transfer of appropriate information to the end users. This study also assesses attitudes toward the EOR-related efforts of the US Department of Energy (DOE) and the BETC, and the role each should play in facilitating the commercialization of EOR processes. More than 300 users and potential users of EOR information were surveyed. Included in the survey sample were representatives of major oil companies, independent oil companies, engineering consulting firms, university and private research organizations, financial institutions and federal, state, and local policy-making bodies. In-depth questionnaires were specifically designed for each group. This study analyzes each group's position pertaining to (1) current level of EOR activity or interest, (2) current and projected EOR information needs, (3) assessments of the BETC's current information services and suggestions for improvement, (4) delineation of technical and economic constraints to increased EOR activity, and (5) steps the DOE might take to enhance the attractiveness of commercial EOR operations.

  7. Technolog

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow Sandia National Laboratories' fundamental science and technology research leads to greater understanding of how and why things work and is intrinsic to technological advances. Basic research that challenges scientific assumptions enables the nation to push scientific boundaries. Innovations and breakthroughs produced at Sandia allow it to tackle critical issues, from

  8. Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technology Technology Delivering science to the marketplace through commercialization, spinoffs and industry partnerships. News Releases Science Briefs Photos Picture of the Week Publications Social Media Videos Fact Sheets Gary Grider (second from right) with the 2015 Richard P. Feynman Innovation Prize. Also pictured (left to right): Duncan McBranch, Chief Technology Officer of Los Alamos National Laboratory; Terry Wallace, Program Associate Director for Global Security at Los Alamos; and Lee

  9. Technolog

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow ... Basic research that challenges scientific assumptions ...

  10. Flexible Fuel Vehicles: Providing a Renewable Fuel Choice, Vehicle

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies Program (VTP) (Fact Sheet) | Department of Energy Flexible Fuel Vehicles: Providing a Renewable Fuel Choice, Vehicle Technologies Program (VTP) (Fact Sheet) Flexible Fuel Vehicles: Providing a Renewable Fuel Choice, Vehicle Technologies Program (VTP) (Fact Sheet) Flexible Fuel vehicles are able to operate using more than one type of fuel. FFVs can be fueled with unleaded gasoline, E85, or any combination of the two. Today more than 7 million vehicles on U.S. highways are

  11. Technology reviews: Shading systems

    SciTech Connect

    Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

    1992-09-01

    We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology. Determine the performance range of available technologies. Identify the most promising technologies and promising trends in technology advances. Examine market forces and market trends. Develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fall into that class.

  12. Basis for Section 3116 Determination for the Idaho Nuclear Technology and Engineering Center Tank Farm Facility at the Idaho National Laboratory

    Office of Environmental Management (EM)

    NE-ID-11226 Revision 0 Basis for Section 3116 Determination for the Idaho Nuclear Technology and Engineering Center Tank Farm Facility November 2006 DOE/NE-ID-11226 Revision 0 Basis for Section 3116 Determination for the Idaho Nuclear Technology and Engineering Center Tank Farm Facility November 2006 ii CONTENTS ACRONYMS.............................................................................................................................................. vii 1. INTRODUCTION AND

  13. Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technology A research team at the University of Colorado has developed a novel heat exchanger design and accompanying manufacturing technique for creating low-cost microchannel heat exchangers from plastics, metals, or ceramics. The prototype used laser welding (upper red lines at right). Expansion makes "chessboard" counter flow pattern (lower right). The figure below shows mass production, where sheets are added one at a time and welded with a mask and filament (left) or laser

  14. Award Fee Determination Scorecard Contractor: Advanced Technologies and Laboratories (ATL) International Inc.

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Advanced Technologies and Laboratories (ATL) International Inc. Contract: Laboratory Analytical Services and Testing Contract Contract Number: DE-AC27-10RV15051 Award Fee Period: January 1, 2015 to November 21, 2015 Basis of Evaluation: January 1, 2015 to November 21, 2015 Award Fee, Performance Evaluation and Measurement Plan Award Fee Available (PBI and SEA): $789,765.60 Award Fee Earned (PBI and SEA): $781,078.18 (98.9%) Award Fee Area Adjectival Ratings for each Performance Based Incentives

  15. Superconducting Magnet Technology for the Upgrade

    SciTech Connect

    Todesco, E.; Ambrosio, G.; Ferracin, P.; Rifflet, J. M.; Sabbi, G. L.; Segreti, M.; Nakamoto, T.; van Weelderen, R.; Xu, Q.

    2015-10-01

    In this section we present the magnet technology for the High Luminosity LHC. After a short review of the project targets and constraints, we discuss the main guidelines used to determine the technology, the field/gradients, the operational margins, and the choice of the current density for each type of magnet. Then we discuss the peculiar aspects of each class of magnet, with special emphasis on the triplet.

  16. The impact of interface/connection technology on determination of risk in a subsea development

    SciTech Connect

    Frisbie, F.R.

    1995-12-31

    Subsea production is a long time player in offshore oil and gas scenarios, particularly in relatively shallow waters and in combination with uncomplicated reservoir workover requirements and simple product chemistries. The increasing emphasis on deepwater hydrocarbon potential creates significant new opportunities for utilizing subsea production systems, if some of the risk factors can be fully quantified and mitigated. This paper will address those aspects of subsea production risk associated with the interface requirements, specifically those associated with providing override and replacement capabilities for failed subsea hardware, and with the connection technology for lowlines and umbilicals. If these areas of potential failure can be shown to be manageable, then a major area of risk associated with subsea developments can be eliminated.

  17. Solar Choice Solutions Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Choice Solutions Inc Jump to: navigation, search Name: Solar Choice Solutions Inc. Place: Calabasas, California Zip: 91302 Sector: Solar Product: Solar Choice Solutions Inc. is an...

  18. Renewable Choice Energy | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Choice Energy Jump to: navigation, search Name: Renewable Choice Energy Place: Boulder, Colorado Zip: 80301 Sector: Carbon, Renewable Energy Product: Renewable Choice Energy is a...

  19. A Stark Choice on Solar

    Energy.gov [DOE]

    As a nation, we face a stark choice. We can sit back and cede our position in the burgeoning solar industry or we can stand up and compete.

  20. Section 3116 Determination for Idaho Nuclear Technology and Engineering Center Tank Farm Facility, signed by Secretary Samuel W. Bodman

    Office of Environmental Management (EM)

    Secretarial Policy Statement on Technology Transfer at Department of Energy Facilities Introduction This Policy Statement is designed to help guide and strengthen the Department of Energy's technology transfer efforts and to heighten awareness of the importance of technology transfer activities throughout DOE. For purposes of this document, the term "technology transfer" refers to the process by which knowledge, intellectual property or capabilities developed at the Department of

  1. Choices for a Brighter Future

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Choices for a Brighter Future For more information contact: George Douglas, 303-275-4096 e:mail: George Douglas Golden, Colo., Nov. 12, 1999 - More and more Americans are getting the power to choose electricity suppliers as the utility industry is deregulated and reorganized. Those energy choices can affect health and well-being for many decades to come. Renewable energy sources—solar, wind, biomass, geothermal and hydropower—can provide reliable electricity while reducing environmental

  2. Alternative Fuels Data Center: Choice Environmental Services...

    Alternative Fuels and Advanced Vehicles Data Center

    Choice Environmental Services Chooses Natural Gas to someone by E-mail Share Alternative Fuels Data Center: Choice Environmental Services Chooses Natural Gas on Facebook Tweet ...

  3. Energy Choice Simulator | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Choice Simulator Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Choice Simulator AgencyCompany Organization: Great Plains Institute Sector: Energy Focus Area:...

  4. Fact #814: January 27, 2014 More Choices when Buying Vehicles that Use

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Advanced Technology and Alternative Fuels | Department of Energy 4: January 27, 2014 More Choices when Buying Vehicles that Use Advanced Technology and Alternative Fuels Fact #814: January 27, 2014 More Choices when Buying Vehicles that Use Advanced Technology and Alternative Fuels The number of models and types of alternative fuel vehicles produced by manufacturers has varied considerably over the last 22 years. In 1991, there were a total of 19 models available that did not run on

  5. A study to determine the perceptions of Michigan contractors to passive solar technologies in residential and commercial construction

    SciTech Connect

    Witte, P.

    1983-06-01

    This study was intended to investigate the perceptions and needs of Michigan contractors in incorporating passive solar technologies in residential and commercial construction. The literature identifies four major categories of barriers which contribute to the slow adoption of solar systems by contractors. They are: economic (initial high price, interest rates, etc.), technological (perceived lack of reliable equipment, lack of elimatelogical data, etc.), psycho-sociological (dependence on the weather, threat to established business networks, etc.) and political-legal (product standardization, building and zoning codes, etc.). A questionnaire aimed at detecting the importance of the four barrier categories was administered to a random sample of 500 Michigan contractors. This paper outlines the procedure utilized in conducting the study. A review of the questionnaire's development and administration is given, followed by a presentation of preliminary data on the completed questionnaires received to date (n = 75).

  6. DETERMINATION OF EXCEPTIONAL CIRCUMSTANCES UNDER THE BAYH-DOLE ACT FOR ENERGY EFFICIENCY, RENEWABLE ENERGY, AND ADVANCED ENERGY TECHNOLOGIES

    Energy.gov [DOE]

    Under the Bayh-Dole Act, 35 U.S.C. §§ 200-12 ("Bayh-Dole"), Federal agencies may determine that "exceptional circumstances" exist such that a modification in the patent rights disposition provided...

  7. Energy 101: Lighting Choices | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lighting Choices Energy 101: Lighting Choices Addthis Description In this edition of Energy 101, we discuss lighting choices. People have been using the same light bulb since Thomas Edison invented it about 130 years ago. Today, there are more lighting options in stores that will save you energy and money. Text Version Below is the text version for the Energy 101: Lighting Choices video: The video opens with "Energy 101: Lighting Choices." This is followed by shots of a variety of

  8. Anchors, Choices and Time: Determinants of Success at the Bargaining...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    at PPPL, adult visitors must show a government-issued photo I.D. - for example, a passport or a driver's license. Non-U.S. citizens must show a government-issued photo I.D.,...

  9. X-ray absorption fine structure spectroscopic determination of plutonium speciation at the Rocky Flats environmental technology

    SciTech Connect

    Lezama-pacheco, Juan S; Conradson, Steven D; Clark, David L

    2008-01-01

    X-ray Absorption Fine Structure spectroscopy was used to probe the speciation of the ppm level Pu in thirteen soil and concrete samples from the Rocky Flats Environmental Technology Site in support of the site remediation effort that has been successfully completed since these measurements. In addition to X-ray Absorption Near Edge Spectra, two of the samples yielded Extended X-ray Absorption Fine Structure spectra that could be analyzed by curve-fits. Most of these spectra exhibited features consistent with PU(IV), and more specificaJly, PuO{sub 2+x}-type speciation. Two were ambiguous, possibly indicating that Pu that was originally present in a different form was transforming into PuO{sub 2+x}, and one was interpreted as demonstrating the presence of an unusual Pu(VI) compound, consistent with its source being spills from a PUREX purification line onto a concrete floor and the resultant extreme conditions. These experimental results therefore validated models that predicted that insoluble PuO{sub 2+x} would be the most stable form of Pu in equilibrium with air and water even when the source terms were most likely Pu metal with organic compounds or a Pu fire. A corollary of these models' predictions and other in situ observations is therefore that the minimal transport of Pu that occurred on the site was via the resuspension and mobilization of colloidal particles. Under these conditions, the small amounts of diffusely distributed Pu that were left on the site after its remediation pose only a negligible hazard.

  10. Consumer Vehicle Choice Model Documentation

    SciTech Connect

    Liu, Changzheng; Greene, David L

    2012-08-01

    In response to the Fuel Economy and Greenhouse Gas (GHG) emissions standards, automobile manufacturers will need to adopt new technologies to improve the fuel economy of their vehicles and to reduce the overall GHG emissions of their fleets. The U.S. Environmental Protection Agency (EPA) has developed the Optimization Model for reducing GHGs from Automobiles (OMEGA) to estimate the costs and benefits of meeting GHG emission standards through different technology packages. However, the model does not simulate the impact that increased technology costs will have on vehicle sales or on consumer surplus. As the model documentation states, “While OMEGA incorporates functions which generally minimize the cost of meeting a specified carbon dioxide (CO2) target, it is not an economic simulation model which adjusts vehicle sales in response to the cost of the technology added to each vehicle.” Changes in the mix of vehicles sold, caused by the costs and benefits of added fuel economy technologies, could make it easier or more difficult for manufacturers to meet fuel economy and emissions standards, and impacts on consumer surplus could raise the costs or augment the benefits of the standards. Because the OMEGA model does not presently estimate such impacts, the EPA is investigating the feasibility of developing an adjunct to the OMEGA model to make such estimates. This project is an effort to develop and test a candidate model. The project statement of work spells out the key functional requirements for the new model.

  11. NERSC Wins HPCWire Editors' Choice Award

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Wins HPCWire Editors' Choice Award NERSC Wins HPCWire Editors' Choice Award November 19, 2014 At SC14 in New Orleans, Tom Tabor, publisher of HPCWire, presented NERSC with HPCWire's 2014 Editors' Choice Award for Best HPC Collaboration Between Government & Industry. The award recognized NERSC's partnership with Intel and Cray in preparation for Cori, the Cray XC supercomputer slated to be deployed at NERSC in 2016. The HPCwire awards are widely recognized as one of the most prestigious HPC

  12. Determination of vapor-liquid equilibrium data and decontamination factors needed for the development of evaporator technology for use in volume reduction of radioactive waste streams

    SciTech Connect

    Betts, S.E.

    1993-10-01

    A program is currently in progress at Argonne National Laboratory to evaluate and develop evaporator technology for concentrating radioactive waste streams. By concentrating radioactive waste streams, disposal costs can be significantly reduced. To effectively reduce the volume of waste, the evaporator must achieve high decontamination factors so that the distillate is sufficiently free of radioactive material. One technology that shows a great deal of potential for this application is being developed by LICON, Inc. In this program, Argonne plans to apply LICON`s evaporator designs to the processing of radioactive solutions. Concepts that need to be incorporated into the design of the evaporator include, criticality safety, remote operation and maintenance, and materials of construction. To design an effective process for concentrating waste streams, both solubility and vapor-liquid equilibrium data are needed. The key issue, however, is the high decontamination factors that have been demonstrated by this equipment. Two major contributions were made to this project. First, a literature survey was completed to obtain available solubility and vapor-liquid equilibrium data. Some vapor-liquid data necessary for the project but not available in the literature was obtained experimentally. Second, the decontamination factor for the evaporator was determined using neutron activation analysis (NAA).

  13. Indirect consequences of ecotax: Changes in materials choices

    SciTech Connect

    Bensahel, J.F.; Teulon, H.

    1995-12-31

    In order to reduce carbon dioxide emissions, a taxation of these emissions and/or of energy consumption has been proposed, the (ecotax). Such an ecotax could have: direct results, in terms of energetic choices (choice of fuels, choice of combustion systems... ) and indirect results, in terms of delocalization of industries (towards countries out of the ecotax area), changes in materials relative prices, etc. This last effect has been estimated for the French environment agency, ADEME. The question is: to evaluate whether a taxation of carbon dioxide emissions could lead to changes in the design of products, to make them more energy sparing, to determine which should be the level of the tax to reach such an effect, and finally to calculate the potential saving in carbon dioxide emissions, and its economic cost for society. Three industrial sectors have been studied: building, packaging and automobile. The study included both environmental and economic analysis, with an exploration of the market elasticity of different materials. Some interesting trade-offs have been met: for instance, car manufacturers could be tempted to use aluminum as a weight saving material, but the taxation of carbon dioxide emissions makes aluminum even less competitive than steel in terms of price. The results show that no major change could be reached with the values currently proposed for the tax, except in the packaging industry. The limit value for the tax to prescribe a technical change has been determined in several particular cases, that will be presented.

  14. Interactions between residential efficiency standards and fuel choice

    SciTech Connect

    Lee, A.D. )

    1991-08-01

    The home buyer brings to the decision an elaborate set of preferences, perceptions, conditions, and attitudes. The homes from which the buyer can choose offer bundles of attributes including location, price, size, energy efficiency, and age. Programs designed to increase residential energy efficiency alter the mix of attributes offered. Ultimately, the effects and penetration of such programs depend on how the altered mix of attributes interacts with buyers' characteristics. One technique for modeling buyer responses to products with different mixes of attributes is conjoint analysis. This technique has been applied primarily in marketing research studies, usually designed to estimate market shares for new consumer products. This paper presents the results of an application of this technique to a housing market in which residential energy-efficiency programs have been instituted to improve the efficiency of new, electrically heated homes. The conjoint analysis methodology permits the analyst to unbundle'' the characteristics of homes and determine how individual characteristics affect the purchase decision. This unbundling is essential for determining how energy efficiency affects buyer choice, and what penetration rates energy-efficiency programs are likely to achieve. When programs are not fuel-blind, it is especially important to unbundle housing characteristics because the programs may affect not only energy-efficiency choice, but also fuel choice. 4 refs., 3 tabs.

  15. HUD Choice Neighborhoods Planning Grants Program

    Energy.gov [DOE]

    The U.S. Department of Housing and Urban Development (HUD) is accepting applications for the Choice Neighborhoods Planning Grant Program to leverage investments in public schools and education programs, early learning programs and services, and improved access to jobs.

  16. Strategy application, observability, and the choice combinator.

    SciTech Connect

    Winter, Victor Lono

    2004-03-01

    In many strategic systems, the choice combinator provides a powerful mechanism for controlling the application of rules and strategies to terms. The ability of the choice combinator to exercise control over rewriting is based on the premise that the success and failure of strategy application can be observed. In this paper we present a higher-order strategic framework with the ability to dynamically construct strategies containing the choice combinator. To this framework, a combinator called hide is introduced that prevents the successful application of a strategy from being observed by the choice combinator. We then explore the impact of this new combinator on a real-world problem involving a restricted implementation of the Java Virtual Machine.

  17. Lighting Choices - White Background | Department of Energy

    Energy Saver

    Choices - White Background Image icon All of these lightbulbs-CFLs, LEDs, and energy-saving incandescents-meet the new energy standards that take effect from 2012-2014. More...

  18. Choice Soy Energy | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Missouri farmers and businessmen aiming to build a USD 15m soybean crushing facility and biodiesel plant. References: Choice Soy Energy1 This article is a stub. You can help...

  19. Customer Choice Would Advance Renewable Energy

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Customer Choice Would Advance Renewable Energy Golden, Colo., Oct. 31, 2001 Giving consumers a greater choice of how their electricity is generated could boost solar, wind and other "green power" sources 40 percent by the end of the decade, according to a new study by two U.S. Department of Energy national laboratories. Achieving such a result, however, would require an orderly transition to competitive power markets and a significant expansion of the green pricing programs currently

  20. A Plug-in Hybrid Consumer Choice Model with Detailed Market Segmentation

    SciTech Connect

    Lin, Zhenhong; Greene, David L

    2010-01-01

    This paper describes a consumer choice model for projecting U.S. demand for plug-in hybrid electric vehicles (PHEV) in competition among 13 light-duty vehicle technologies over the period 2005-2050. New car buyers are disaggregated by region, residential area, attitude toward technology risk, vehicle usage intensity, home parking and work recharging. The nested multinomial logit (NMNL) model of vehicle choice incorporates daily vehicle usage distributions, refueling and recharging availability, technology learning by doing, and diversity of choice among makes and models. Illustrative results are presented for a Base Case, calibrated to the Annual Energy Outlook (AEO) 2009 Reference Updated Case, and an optimistic technology scenario reflecting achievement of U.S. Department of Energy s (DOE s) FreedomCAR goals. PHEV market success is highly dependent on the degree of technological progress assumed. PHEV sales reach one million in 2037 in the Base Case but in 2020 in the FreedomCARGoals Case. In the FreedomCARGoals Case, PHEV cumulative sales reach 1.5 million by 2015. Together with efficiency improvements in other technologies, petroleum use in 2050 is reduced by about 45% from the 2005 level. After technological progress, PHEV s market success appears to be most sensitive to recharging availability, consumers attitudes toward novel echnologies, and vehicle usage intensity. Successful market penetration of PHEVs helps bring down battery costs for electric vehicles (EVs), resulting in a significant EV market share after 2040.

  1. Vehicle Technologies Office Merit Review 2014: CFD Simulations and Experiments to Determine the Feasibility of Various Alternate Fuels for Compression Ignition Engine Applications

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation given by Argonne National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about CFD simulations...

  2. Lithium-based Technologies | Y-12 National Security Complex

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Lithium-based Technologies Lithium-based Technologies Y-12's 60 years of rich lithium operational history and expertise make it the clear choice for deployment of new lithium-based ...

  3. Natural Gas Vehicle Webinar: Technology, Best Strategies, and Lessons Learned

    Office of Energy Efficiency and Renewable Energy (EERE)

    This Clean Cities program webinar elaborates first on successful past technology choices and then suggests future technological pathways that can be taken for the United States to expand its use of...

  4. Frequently Asked Questions: Lighting Choices to Save You Money | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Frequently Asked Questions: Lighting Choices to Save You Money Frequently Asked Questions: Lighting Choices to Save You Money Frequently Asked Questions: Lighting Choices to Save You Money Below are some of the most frequently asked questions and answers about the new lighting efficiency standards. Learn more about your lighting choices and find out how to shop for lights by lumens, not watts. Why are my lighting choices changing? What is the Energy Independence and Security Act of

  5. Determination of a cost-effective air pollution control technology for the control of VOC and HAP emissions from a steroids processing plant

    SciTech Connect

    Hamel, T.M.

    1997-12-31

    A steroids processing plant located in northeastern Puerto Rico emits a combined average of 342 lb/hr of hazardous air pollutants (HAPs) and volatile organic compounds (VOCs) from various process operations. The approach that this facility used to implement maximum achievable control technology (MACT) may assist others who must contend with MACT for pharmaceutical or related manufacturing facilities. Federal air regulations define MACT standards for stationary sources emitting any of 189 HAPs. The MACT standards detailed in the NESHAPs are characterized by industry and type of emission control system or technology. It is anticipated that the standard will require HAP reductions of approximately 95%. The steroid plant`s emissions include the following pollutant loadings: VOC/HAP Emission Rate (lb/hr): Methanol 92.0; Acetone 35.0; Methylene chloride 126.0; Chloroform 25.0; Ethyl acetate 56.0; Tetrahydrofuran 5.00; and 1,4-Dioxane 3.00. The facility`s existing carbon adsorption control system was nearing the end of its useful life, and the operators sought to install an air pollution control system capable of meeting MACT requirements for the pharmaceutical industry. Several stand-alone and hybrid control technologies were considered for replacement of the carbon adsorption system at the facility. This paper examines the following technologies: carbon adsorption, membrane separation, thermal oxidation, membrane separation-carbon adsorption, and condensation-carbon adsorption. Each control technology is described; the advantages and disadvantages of utilizing each technology for the steroid processing plant are examined; and capital and operating costs associated with the implementation of each technology are presented. The rationale for the technology ultimately chosen to control VOC and HAP emissions is presented.

  6. The Intersection of Net Metering and Retail Choice: An Overview...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Intersection of Net Metering and Retail Choice: An Overview of Policy, Practice and Issues The Intersection of Net Metering and Retail Choice: An Overview of Policy, Practice and ...

  7. Frequently Asked Questions: Lighting Choices to Save You Money...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Newer lighting choices are available to save you money. Q: When will the new bulbs be phased in? A: Newer energy-saving lightbulb choices that save about 25% to 75% in energy costs ...

  8. Power Choice/Pepco Energy Serv | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    ChoicePepco Energy Serv Jump to: navigation, search Name: Power ChoicePepco Energy Serv Place: New Jersey Phone Number: 202-833-7500 Website: www.pepcoenergy.com Twitter:...

  9. Information for Media on Lighting Choices | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Media on Lighting Choices Information for Media on Lighting Choices Information for Media on Lighting Choices These videos, presentation, and images are available for use by media organizations. The materials are copyright-free, and you are welcome to cite the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy as the source. Videos A residential home is shown with newer lighting choices that save energy and money. All of the lightbulbs in this video meet the new energy

  10. ADOPT: A Historically Validated Light Duty Vehicle Consumer Choice Model

    SciTech Connect

    Brooker, A.; Gonder, J.; Lopp, S.; Ward, J.

    2015-05-04

    The Automotive Deployment Option Projection Tool (ADOPT) is a light-duty vehicle consumer choice and stock model supported by the U.S. Department of Energy’s Vehicle Technologies Office. It estimates technology improvement impacts on U.S. light-duty vehicles sales, petroleum use, and greenhouse gas emissions. ADOPT uses techniques from the multinomial logit method and the mixed logit method estimate sales. Specifically, it estimates sales based on the weighted value of key attributes including vehicle price, fuel cost, acceleration, range and usable volume. The average importance of several attributes changes nonlinearly across its range and changes with income. For several attributes, a distribution of importance around the average value is used to represent consumer heterogeneity. The majority of existing vehicle makes, models, and trims are included to fully represent the market. The Corporate Average Fuel Economy regulations are enforced. The sales feed into the ADOPT stock model. It captures key aspects for summing petroleum use and greenhouse gas emissions This includes capturing the change in vehicle miles traveled by vehicle age, the creation of new model options based on the success of existing vehicles, new vehicle option introduction rate limits, and survival rates by vehicle age. ADOPT has been extensively validated with historical sales data. It matches in key dimensions including sales by fuel economy, acceleration, price, vehicle size class, and powertrain across multiple years. A graphical user interface provides easy and efficient use. It manages the inputs, simulation, and results.

  11. Korea`s choice of a new generation of nuclear plants

    SciTech Connect

    Redding, J.R.

    1994-12-31

    The ABWR and SBWR design, both under development at GE, provide the best platform for developing the next generation advanced plants. The ABWR, which is rapidly setting the standard for new nuclear reactor plants, is clearly the best choice to meet the present energy needs of Korea. And through a GE/Korea partnership to develop the plant of the next century, Korea will establish itself as a leader in innovative reactor technology.

  12. Vehicle Technologies Office: Technologies

    Office of Energy Efficiency and Renewable Energy (EERE)

    To support DOE's goal to provide clean and secure energy, the Vehicle Technologies Office (VTO) invests in research and development that:

  13. Technology Maturation Plan (TMP) Wet Air Oxidation (WAO) Technology for

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Tank 48H Treatment Project (TTP) | Department of Energy Wet Air Oxidation (WAO) Technology for Tank 48H Treatment Project (TTP) Technology Maturation Plan (TMP) Wet Air Oxidation (WAO) Technology for Tank 48H Treatment Project (TTP) This assessment determines the technology maturity level of the candidate Tank 48H treatment technologies that are being considered for implementation at DOE's SRS - specifically Wet Air Oxidation. Technology Maturation Plan (TMP) Wet Air Oxidation (WAO)

  14. Nick Wright Named Advanced Technologies Group Lead

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Nick Wright Named Advanced Technologies Group Lead Nick Wright Named Advanced Technologies Group Lead February 4, 2013 Nick Nick Wright has been named head of the National Energy Research Scientific Computing Center's (NERSC) Advanced Technologies Group (ATG), which focuses on understanding the requirements of current and emerging applications to make choices in hardware design and programming models that best serve the science needs of NERSC users. ATG specializes in benchmarking, system

  15. Customizing a VOC control technology

    SciTech Connect

    Enneking, J.C.

    1998-12-31

    An extremely important but very difficult element in applying an emission control device to an exhaust stream is to chose the proper technology. Once it has been determined that recovery, rather than destruction, is appropriate, there are still several process choices available. The type of process is generally dictated by the VOC concentration and total air flow rate. Adsorption is usually chosen for low concentrations and high flow rates while refrigeration is usually best for high concentrations and low flow rates. This paper describes six applications. Adsorption was applied to two of them and condensation to the other four. Solvent vapors from a tape coating operation are recovered in an activated carbon adsorption process and reused. VOC`s from soil vapor extraction operations are captured by activated carbon which is regenerated by a mobile unit. VOC`s displaced from filling tank cars at a refinery are condensed at low temperatures in a high pressure system which uses a pressure swing dryer to remove water. Two different processes were installed to prevent VOC emissions from pharmaceutical processing plants. They both use a thermal swing dryer to remove moisture and low temperature condensation to recover the solvent. With very high concentrations of solvent in an inert gas stream, indirect condensation is used to purify the nitrogen and recover the solvent for reuse. Process flow diagrams and operating results are presented.

  16. Paper by Ames Laboratory scientists named Editor's Choice | The Ames

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laboratory Paper by Ames Laboratory scientists named Editor's Choice Oleg Pestovsky, (left), Andreja Bakac (seated) and Hajem Bataineh (right) authored a paper that has been named an Editor's Choice by the American Chemical Society. A paper by Ames Laboratory scientists Oleg Pestovsky, Andreja Bakac, and Hajem Bataiheh has been named an Editor's Choice by the American Chemical Society. Bakac, now retired from the Ames Laboratory, is an adjunct professor in the Chemistry Department at Iowa

  17. Advanced nuclear fuel cycles - Main challenges and strategic choices

    SciTech Connect

    Le Biez, V.; Machiels, A.; Sowder, A.

    2013-07-01

    A graphical conceptual model of the uranium fuel cycles has been developed to capture the present, anticipated, and potential (future) nuclear fuel cycle elements. The once-through cycle and plutonium recycle in fast reactors represent two basic approaches that bound classical options for nuclear fuel cycles. Chief among these other options are mono-recycling of plutonium in thermal reactors and recycling of minor actinides in fast reactors. Mono-recycling of plutonium in thermal reactors offers modest savings in natural uranium, provides an alternative approach for present-day interim management of used fuel, and offers a potential bridging technology to development and deployment of future fuel cycles. In addition to breeder reactors' obvious fuel sustainability advantages, recycling of minor actinides in fast reactors offers an attractive concept for long-term management of the wastes, but its ultimate value is uncertain in view of the added complexity in doing so,. Ultimately, there are no simple choices for nuclear fuel cycle options, as the selection of a fuel cycle option must reflect strategic criteria and priorities that vary with national policy and market perspectives. For example, fuel cycle decision-making driven primarily by national strategic interests will likely favor energy security or proliferation resistance issues, whereas decisions driven primarily by commercial or market influences will focus on economic competitiveness.

  18. 1366 TECHNOLOGIES | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1366 TECHNOLOGIES 1366 TECHNOLOGIES DOE-LPO_Project-Posters_SLR-MFG_1366-Technologies.pdf (214.98 KB) More Documents & Publications Final Report - 1366 Project Silicon: Reclaiming US Silicon PV Leadership CX-100619 Categorical Exclusion Determination CX-003600: Categorical Exclusion Determination

  19. CX-013314: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CX-013314: Categorical Exclusion Determination Advanced Reactor Technologies Tristructural ... in INL-08-082 (OA 7) as Very High Temperature Reactor (VHTR) Technology Development. ...

  20. Apps for Energy Popular Choice Winners | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    voting has closed and the full list of winners is now available at http:energy.govarticlespopular-choice-winners-announced-apps-energy-competition. Winners of the challenge...

  1. Choice FuelCorp Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Pennsylvania Zip: 17702 Product: Pennsylvania-based biodiesel producer, from its plant in Williamsport. References: Choice FuelCorp, Inc.1 This article is a stub. You...

  2. Battery Choices for Different Plug-in HEV Configurations (Presentation)

    SciTech Connect

    Pesaran, A.

    2006-07-12

    Presents battery choices for different plug-in hybrid electric vehicle (HEV) configurations to reduce cost and to improve performance and life.

  3. Choices and Requirements of Batteries for EVs, HEVs, PHEVs (Presentation)

    SciTech Connect

    Pesaran, A. A.

    2011-04-01

    This presentation describes the choices available and requirements for batteries for electric vehicles, hybrid electric vehicles, plug-in hybrid electric vehicles.

  4. Cellulose Nanomaterials: The Sustainable Material of Choice for...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Laboratory June 26, 2012 Cellulose Nanomaterials: The Sustainable Material of Choice for the 21 st Century Sustainable Nanomaterials Workshop * Wood: a Sustainable & Renewable ...

  5. FY 2008 Honeywell Federal Manufacturing & Technologies, LLC,...

    National Nuclear Security Administration (NNSA)

    FY 2008 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2008 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total ...

  6. FY 2010 Honeywell Federal Manufacturing & Technologies, LLC,...

    National Nuclear Security Administration (NNSA)

    FY 2010 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2010 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total ...

  7. FY 2009 Honeywell Federal Manufacturing & Technologies, LLC,...

    National Nuclear Security Administration (NNSA)

    FY 2009 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2009 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total ...

  8. FY 2006 Honeywell Federal Manufacturing & Technologies, LLC,...

    National Nuclear Security Administration (NNSA)

    FY 2006 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2006 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total ...

  9. FY 2007 Honeywell Federal Manufacturing & Technologies, LLC,...

    National Nuclear Security Administration (NNSA)

    FY 2007 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2007 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total ...

  10. FY 2011 Honeywell Federal Manufacturing & Technologies, LLC,...

    National Nuclear Security Administration (NNSA)

    FY 2011 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2011 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total ...

  11. China reaches crossroads for strategic choices

    SciTech Connect

    Xu Xiaojie

    1997-04-01

    China is not only the world`s sixth largest oil producer but also one of the top 20 natural gas producers. Oil output and gas production account for 19.95% and 2% of the country`s primary energy mix, respectively. From 1963 through 1989, Chinese indigenous production increased steadily as a whole, thanks to major discoveries in eastern China. However, since 1990, the country`s crude production has stagnated, while oil imports have increased constantly. The large gap that will exist inevitably between demand and domestic oil supply will be satisfied by crude imports and natural gas, instead. However, ample imports and further development of natural gas are constrained by financial problems, inadequate infrastructure and the current, central governmental planning system. In addition, environmental concerns have become a stronger factor than ever before. Several solutions are recommended to address these problems. However, it will be difficult to freely pursue these challenges without making several, hard strategic choices. The paper discusses economic growth vs. supply shortfalls; regional imbalances and frontier challenges; infrastructue and financing; marketization and regulatory reform; and geopolitical and security impacts.

  12. Energy Technologies

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Our Vision National User Facilities Research Areas In Focus Global Solutions Energy Technologies Area (ETA) Building Technology & Urban Systems Energy Analysis & Environmental...

  13. Exploration Technologies - Technology Needs Assessment

    SciTech Connect

    Greene, Amanda I.; Thorsteinsson, Hildigunnur; Reinhardt, Tim; Solomon, Samantha; James, Mallory

    2011-06-01

    This assessment is a critical component of ongoing technology roadmapping efforts, and will be used to guide the Geothermal Technology Program's research and development.

  14. Categorical Exclusion Determinations: Advanced Technology Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Reequipping and Engineering CX(s) Applied: B1.31, B5.1 Date: 09062011 ... Aptera All-Electric and Hybrid Electric Vehicles CX(s) Applied: B1.31, B5.1 Date: 0620...

  15. CABLE TECHNOLOGY LABORATORIES, INC. DETERMINATION OF THRESHOLD...

    Office of Scientific and Technical Information (OSTI)

    Cable TABLE OF CONTENTS ABSTRACT INTRODUCTION DESCRIPTION OF TEST CABLES TEMPERATURE CONDITIONING OF TEST CABLES TESTING OF XLPE INSULATED CABLE BEFORE AGING Threshold ...

  16. High Impact Technology Catalyst: Technology Deployment Strategies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Catalyst: Technology Deployment Strategies High Impact Technology Catalyst: Technology Deployment Strategies The Energy Department released the High Impact Technology Catalyst: ...

  17. Vehicle Technologies Office: Graduate Automotive Technology Education...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Education & Workforce Development Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) Vehicle Technologies Office: Graduate Automotive Technology ...

  18. NREL: Technology Transfer - Technology Partnership Agreements

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Ombuds. Printable Version Technology Transfer Home About Technology Transfer Technology Partnership Agreements Agreements for Commercializing Technology CRADAs Work for...

  19. NREL: Technology Transfer - Technologies Available for Licensing

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Ombuds. Printable Version Technology Transfer Home About Technology Transfer Technology Partnership Agreements Licensing Agreements Technologies Available for Licensing...

  20. Can a future choice affect a past measurement’s outcome?

    SciTech Connect

    Aharonov, Yakir; Cohen, Eliahu; Elitzur, Avshalom C.

    2015-04-15

    An EPR experiment is studied where each particle within the entangled pair undergoes a few weak measurements (WMs) along some pre-set spin orientations, with the outcomes individually recorded. Then the particle undergoes one strong measurement along an orientation chosen at the last moment. Bell-inequality violation is expected between the two final measurements within each EPR pair. At the same time, statistical agreement is expected between these strong measurements and the earlier weak ones performed on that pair. A contradiction seemingly ensues: (i) Bell’s theorem forbids spin values to exist prior to the choice of the orientation measured; (ii) A weak measurement is not supposed to determine the outcome of a successive strong one; and indeed (iii) Almost no disentanglement is inflicted by the WMs; and yet (iv) The outcomes of weak measurements statistically agree with those of the strong ones, suggesting the existence of pre-determined values, in contradiction with (i). Although the conflict can be solved by mere mitigation of the above restrictions, the most reasonable resolution seems to be that of the Two-State-Vector Formalism (TSVF), namely, that the choice of the experimenter has been encrypted within the weak measurement’s outcomes, even before the experimenters themselves know what their choice will be.

  1. Leading by Example: Argonne Senior Management Makes "Green" Vehicle Choices

    ScienceCinema

    Peters, Mark; Kearns, Paul;

    2013-04-19

    Argonne's senior management shows leadership in the sustainability arena with their own personal choices in "green" vehicles. They don't just talk the talk ? they walk the walk.

  2. Lighting Choices to Save You Money Banner | Department of Energy

    Energy Saver

    to Save You Money Banner Lighting Choices to Save You Money Banner All of these lightbulbs-CFLs, LEDs, and energy-saving incandescents-meet the new energy standards that take...

  3. Choices related to chemical cleaning of fossil plant equipment

    SciTech Connect

    Shields, K.

    1995-01-01

    Choices faced by utility personnel responsible for cleanliness of steamside and waterside surfaces of fossil plant equipment are identified and discussed. Electric Power Research Institute (EPRI) guidelines for chemical cleaning are introduced. A chemical cleaning case history is presented.

  4. Frequently Asked Questions: Lighting Choices to Save You Money...

    Energy.gov [DOE] (indexed site)

    be available to save you money. Q: When will the new bulbs be phased in? A: Newer energy-saving lightbulb choices that save about 25% to 75% in energy costs are on the market...

  5. Mission maps for use in the choice of specific impulse for manned Mars missions

    SciTech Connect

    Madsen, W.W.; Neuman, J.E.; Olson, T.S.; Siahpush, A.S.

    1991-01-01

    The choice of engine concept for the initial manned missions to Mars should be driven by what can be feasibly built and flight qualified in the near term, and by the level of engine performance that is required for these missions. This paper addresses how mission requirements affect the choice of specific impulse, and consequently what values of the specific impulse best serve these missions. Broad mission surveys and sensitivity studies were performed to determine the specific impulse values that allow for fast transfer times and wide launch windows. We find that a specific impulse of around 1000 to 1200 sec is sufficient. Choosing an engine concept that has a higher specific impulse value is not justified for these missions because the modest reduction in propellant requirements and further widening of the launch windows does not compensate for the substantially greater technical risk. 3 refs., 8 figs.

  6. Understanding the Effect of Baseline Modeling Implementation Choices on Analysis of Demand Response Performance

    SciTech Connect

    University of California, Berkeley; Addy, Nathan; Kiliccote, Sila; Mathieu, Johanna; Callaway, Duncan S.

    2012-06-13

    Accurate evaluation of the performance of buildings participating in Demand Response (DR) programs is critical to the adoption and improvement of these programs. Typically, we calculate load sheds during DR events by comparing observed electric demand against counterfactual predictions made using statistical baseline models. Many baseline models exist and these models can produce different shed calculations. Moreover, modelers implementing the same baseline model can make different modeling implementation choices, which may affect shed estimates. In this work, using real data, we analyze the effect of different modeling implementation choices on shed predictions. We focused on five issues: weather data source, resolution of data, methods for determining when buildings are occupied, methods for aligning building data with temperature data, and methods for power outage filtering. Results indicate sensitivity to the weather data source and data filtration methods as well as an immediate potential for automation of methods to choose building occupied modes.

  7. NREL, Governor's Office Help Coloradans Make Clean Energy Choices

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NREL, Governor's Office Help Coloradans Make Clean Energy Choices For more information contact: Sarah Holmes Barba, 303-275-3023 email: Sarah Holmes Barba Golden, Colo., Sept. 13, 2000 - A new publication provides Colorado consumers with the tools to select sensible clean-energy solutions. The booklet, Colorado's Clean Energy Choices, provides basic information on green power available today from Colorado utilities around the state. It also outlines how farmers and ranchers can generate their

  8. Beryllium Screening - Informed Choice Document | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Beryllium Screening - Informed Choice Document Beryllium Screening - Informed Choice Document January 2007 Cases of chronic beryllium disease (CBD), a legacy of the Department of Energy's (DOE) role in weapons production, have been increasing across the DOE complex. This trend has sparked increased concern about this serious occupational illness. In a national effort to identify current and former workers who have CBD or are sensitized to beryllium and to better understand the illness, DOE has

  9. BioenergizeME Infographic Challenge: Understanding America's Bioenergy Choices

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Understanding America's Bioenergy Choices Bioenergy is derived from organic matter to produce renewable fuels, products, and power. This national challenge aims to inspire students to explore America's bioenergy choices and share what they learn with others. The Energy Department is challenging high school-aged students to investigate a bioenergy topic and design an infographic that illustrates their research. � For more information, please visit energy.gov/eere/bioenergy/infographic-challenge

  10. Discrete Choice Analysis: Hydrogen FCV Demand Potential | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Discrete Choice Analysis: Hydrogen FCV Demand Potential Discrete Choice Analysis: Hydrogen FCV Demand Potential Presentation by Cory Welch at the 2010-2025 Scenario Analysis for Hydrogen Fuel Cell Vehicles and Infrastructure meeting on January 31, 2007. scenario_analysis_welch1_07.pdf (2.37 MB) More Documents & Publications HyDIVE (Hydrogen Dynamic Infrastructure and Vehicle Evolution) Model Analysis Analysis of the Transition to Hydrogen Fuel Cell Vehicles and the Potential

  11. Renewable Energy Activities: Choices for Tomorrow | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Renewable Energy Activities: Choices for Tomorrow Renewable Energy Activities: Choices for Tomorrow Below is information about the student activity/lesson plan from your search. Grades 5-8 Subject Bioenergy, Wind Energy, Solar, Energy Basics, Water Summary Here you can find more activities on solar energy, biomass, hydropower, and wind energy for students in grades 6-8. Curriculum Environmental Science, General Science, Chemistry Plan Time Varies by activity Materials Materials vary by activity.

  12. Environmental Protection Agency Safer Choice Partner of the Year Awards

    Energy.gov [DOE]

    On May 9, the U.S. Environmental Protection Agency (EPA) recognized 24 Safer Choice Partner of the Year award winners from across 12 states, the District of Columbia and Canada for outstanding achievement in the design, manufacture, promotion and use of a range of cleaning and other household products that carry the Safer Choice label. DOE was recognized as part of the Federal Sustainable Acquisitions and Materials Management Practices (SAMM) Working Group under the Program Supporter category.

  13. Clean Cast Steel Technology - Machinability and Technology Transfer

    SciTech Connect

    C. E. Bates; J. A. Griffin

    2000-05-01

    There were two main tasks in the Clean Cast Steel Technology - Machinability and Technology Transfer Project. These were (1) determine the processing facts that control the machinability of cast steel and (2) determine the ability of ladle stirring to homogenize ladle temperature, reduce the tap and pouring temperatures, and reduce casting scrap.

  14. Commercialization of clean coal technologies

    SciTech Connect

    Bharucha, N.

    1994-12-31

    The steps to commercialization are reviewed in respect of their relative costs, the roles of the government and business sectors, and the need for scientific, technological, and economic viability. The status of commercialization of selected clean coal technologies is discussed. Case studies related to a clean coal technology are reviewed and conclusions are drawn on the factors that determine commercialization.

  15. Development of Acetic Acid Removal Technology for the UREX+Process

    SciTech Connect

    Robert M. Counce; Jack S. Watson

    2009-06-30

    It is imperative that acetic acid is removed from a waste stream in the UREX+process so that nitric acid can be recycled and possible interference with downstreatm steps can be avoidec. Acetic acid arises from acetohydrozamic acid (AHA), and is used to suppress plutonium in the first step of the UREX+process. Later, it is hydrolyzed into hydroxyl amine nitrate and acetic acid. Many common separation technologies were examined, and solvent extraction was determined to be the best choice under process conditions. Solvents already used in the UREX+ process were then tested to determine if they would be sufficient for the removal of acetic acid. The tributyl phosphage (TBP)-dodecane diluent, used in both UREX and NPEX, was determined to be a solvent system that gave sufficient distribution coefficients for acetic acid in addition to a high separation factor from nitric acid.

  16. Vehicle Technologies Office - Materials Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Technologies Office Materials Technologies Ed Owens Jerry Gibbs Will Joost eere.energy.gov 2 | Vehicle Technologies Program Materials Technologies Materials Technologies $36.9 M Lightweight Materials $28.0 M Values are FY14 enacted Propulsion Materials $8.9 M Properties and Manufacturing Multi-Material Enabling Modeling & Computational Mat. Sci. Engine Materials, Cast Al & Fe High Temp Alloys Exhaust Sys. Materials, Low T Catalysts Lightweight Propulsion FY13 Enacted $27.5 M

  17. Available Technologies

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    application. Search Our Technologies submit Advanced Materials Advanced Materials Biotechnology Biotechnology Chemistry Chemistry Energy Energy High Performance Computing:...

  18. Technology Opportunities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Intellectual Property » Technology Opportunities Technology Opportunities We deliver innovation through an integrated portfolio of R&D work across our key national security sponsoring agencies, enhanced by the ideas developed through our strategic internal investments. Contact Business Development Team Richard P. Feynman Center for Innovation (505) 665-9090 Email Periodically, the Laboratory notifies the public of technologies and capabilities that may be of interest. These technologies may

  19. Licensing Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Licensing Technology Licensing Technology The primary function of Los Alamos Licensing Program is to move Los Alamos technology to the marketplace for the benefit of the U.S. economy. Our intellectual property may be licensed for commercial use, research applications, and U.S. government use. Contact thumbnail of Marcus Lucero Head of Licensing Marcus Lucero Richard P. Feynman Center for Innovation (505) 665-6569 Email Although Los Alamos's primary mission is national security, our technologies

  20. Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    - FOR OFFICIAL USE ONLY - DRAFT 1 Advanced Composites Materials and their Manufacture 1 Technology Assessment 2 Contents 3 1. Introduction to the Technology/System ................................................................................................ 2 4 2. Technology Potential and Assessment .................................................................................................. 4 5 2.1 The Potential for Advanced Composites for Clean Energy Application Areas

  1. Analyzing the impact of modeling choices and assumptions in compartmental epidemiological models

    DOE PAGES [OSTI]

    Nutaro, James J.; Pullum, Laura L.; Ramanathan, Arvind; Ozmen, Ozgur

    2016-05-01

    In this study, computational models have become increasingly used as part of modeling, predicting, and understanding how infectious diseases spread within large populations. These models can be broadly classified into differential equation-based models (EBM) and agent-based models (ABM). Both types of models are central in aiding public health officials design intervention strategies in case of large epidemic outbreaks. We examine these models in the context of illuminating their hidden assumptions and the impact these may have on the model outcomes. Very few ABM/EBMs are evaluated for their suitability to address a particular public health concern, and drawing relevant conclusions aboutmore » their suitability requires reliable and relevant information regarding the different modeling strategies and associated assumptions. Hence, there is a need to determine how the different modeling strategies, choices of various parameters, and the resolution of information for EBMs and ABMs affect outcomes, including predictions of disease spread. In this study, we present a quantitative analysis of how the selection of model types (i.e., EBM vs. ABM), the underlying assumptions that are enforced by model types to model the disease propagation process, and the choice of time advance (continuous vs. discrete) affect the overall outcomes of modeling disease spread. Our study reveals that the magnitude and velocity of the simulated epidemic depends critically on the selection of modeling principles, various assumptions of disease process, and the choice of time advance.« less

  2. Turbine imaging technology assessment

    SciTech Connect

    Moursund, R. A.; Carlson, T. J.

    2004-12-01

    The goal of this project was to identify and evaluate imaging technologies for observing juvenile fish within a Kaplan turbine, and specifically that would enable scientists to determine mechanisms of fish injury within an operating turbine unit. This report documents the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. These observations were used to make modifications to dam structures and operations to improve conditions for fish passage while maintaining or improving hydropower production. The physical and hydraulic environment that fish experience as they pass through the hydroelectric plants were studied and the regions with the greatest potential for injury were defined. Biological response data were also studied to determine the probable types of injuries sustained in the turbine intake and what types of injuries are detectable with imaging technologies. The study grouped injury-causing mechanisms into two categories: fluid (pressure/cavitation, shear, turbulence) and mechanical (strike/collision, grinding/pinching, scraping). The physical constraints of the environment, together with the likely types of injuries to fish, provided the parameters needed for a rigorous imaging technology evaluation. Types of technology evaluated included both tracking and imaging systems using acoustic technologies (such as sonar and acoustic tags) and optic technologies (such as pulsed-laser videography, which is high-speed videography using a laser as the flash). Criteria for determining image data quality such as frame rate, target detectability, and resolution were used to quantify the minimum requirements of an imaging sensor.

  3. Technology '90

    SciTech Connect

    Not Available

    1991-01-01

    The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report.

  4. Solar Decathlon: Appalachian State Wins People's Choice Award |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Appalachian State Wins People's Choice Award Solar Decathlon: Appalachian State Wins People's Choice Award October 3, 2011 - 10:38am Addthis On Friday, Sept. 30, 2011, U.S. Department of Energy Secretary Steven Chu spoke with Jeffrey Tiller, left, and David Lee, right, members of Appalachian State’s Solar Decathlon team. | Credit: Stefano Paltera/U.S. Department of Energy Solar Decathlon On Friday, Sept. 30, 2011, U.S. Department of Energy Secretary Steven Chu spoke

  5. Lighting Choices to Save You Money | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lighting Choices to Save You Money Lighting Choices to Save You Money This Energy 101 video explores the different lighting options available to consumers. Light your home using the same amount of light for less money. An average household dedicates about 5% of its energy budget to lighting. Switching to energy-efficient lighting is one of the fastest ways to cut your energy bills. By replacing your home's five most frequently used light fixtures or bulbs with models that have earned the ENERGY

  6. Flexible Fuel Vehicles: Providing a Renewable Fuel Choice, Vehicle Technologies Program (VTP) (Fact Sheet)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    an FFV? An FFV, as its name implies, has the flex- ibility of running on more than one type of fuel. FFVs can be fueled with unleaded gasoline, E85, or any combination of the two. Like conventional gasoline vehicles, FFVs have a single fuel tank, fuel system, and engine. And they are available in a wide range of models such as sedans, pickups, and minivans. Light-duty FFVs are designed to operate with at least 15% gasoline in the fuel, mainly to ensure they start in cold weather. FFVs are

  7. Flexible Fuel Vehicles: Providing a Renewable Fuel Choice, Vehicle Technologies Program (VTP) (Fact Sheet)

    Alternative Fuels and Advanced Vehicles Data Center

    What is an FFV? An FFV, as its name implies, has the flex- ibility of running on more than one type of fuel. FFVs can be fueled with unleaded gasoline, E85, or any combination of the two. Like conventional gasoline vehicles, FFVs have a single fuel tank, fuel system, and engine. And they are available in a wide range of models such as sedans, pickups, and minivans. Light-duty FFVs are designed to operate with at least 15% gasoline in the fuel, mainly to ensure they start in cold weather. FFVs

  8. Technology Maturation Plans (TMPs) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Tank Waste and Waste Processing » Technology Maturation Plans (TMPs) Technology Maturation Plans (TMPs) Documents Available for Download November 1, 2007 Technology Maturation Plan (TMP) Fluidized Bed Steam Reforming (FBSR) Technology for Tank 48H Treatment Project (TTP) This assessment determines the technology maturity level of the candidate Tank 48H treatment technologies that are being considered for implementation at DOE's SRS - specifically Fluidized Bed Steam Reformer System. November 1,

  9. Department of Energy Quadrennial Technology Review Framing Document

    Energy.gov [DOE] (indexed site)

    Quadrennial Technology Review Framing Document http://energy.gov/QTR 3/14/2011 U.S. Department of ENERGY 2 The United States Department of Energy (DOE) has initiated a review of its energy technology activities (Quadrennial Technology Review, or QTR). This framing document is a principal means of facilitating stakeholder engagement in that process. It describes the nation's energy landscape and challenges, identifies important research, development, and demonstration (RD&D) policy choices to

  10. NREL: Technology Transfer - Agreements for Commercializing Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    303-384-7353. Printable Version Technology Transfer Home About Technology Transfer Technology Partnership Agreements Agreements for Commercializing Technology CRADAs Work for...

  11. Vehicle Technologies Office: 2015 Electric Drive Technologies...

    Office of Environmental Management (EM)

    Electric Drive Technologies Annual R&D Progress Report Vehicle Technologies Office: 2015 Electric Drive Technologies Annual R&D Progress Report The Electric Drive Technologies ...

  12. Huazhong Science Technology University Yongtai Science Technology...

    OpenEI (Open Energy Information) [EERE & EIA]

    Huazhong Science Technology University Yongtai Science Technology Co Ltd Jump to: navigation, search Name: Huazhong Science & Technology University Yongtai Science & Technology Co...

  13. Technology Transfer

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    technology transfer Technology Transfer Since 1974, the Federal Laboratory Consortium (FLC) Award for Excellence in Technology Transfer has recognized scientists and engineers at federal government and research centers for their "uncommon creativity and initiative in conveying innovations from their facilities to industry and local government." Scientists and engineers from more than 650 federal government laboratories and research centers compete for the 30 awards presented each year.

  14. Technology Partnering

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Transfer and Related Technology Partnering Activities at the National Laboratories and Other Facilities Fiscal Years 2009-2013 Report to Congress May 2015 United States Department of Energy Washington, DC 20585 Message from the Secretary The Report on Technology Transfer and Related Partnering Activities at the National Laboratories and Other Facilities for Fiscal Year 2009-2013 is prepared in accordance with the requirements of the Technology Transfer and Commercialization Act of 2000: It is

  15. Technology Opportunities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    by the U.S. Department of Energy and Office of Science - ... feedstock-to-fuel conversion, coproduct production, ... Patents Software Tools Technology Opportunities Penta Charts

  16. Technology Validation

    Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  17. CSP technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    technology - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy ...

  18. TECHNOLOGY FORUM

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    TECHNOLOGY FORUM The 2014 SunShot Grand Challenge Summit and Peer Review is hosting a Technology Forum showcasing innovative and cutting-edge technologies that are helping to drive down the cost of solar energy. The Forum features a wide range of solar industry exhibitors showcasing software and hardware products and solutions, as well as nearly 300 SunShot awardees displaying their work and answering questions about their projects. TECHNOLOGY FORUM HOURS * May 19 from 4:00-7:00 PM * May 20

  19. Normal Conducting CLIC Technology

    SciTech Connect

    Jensen, Erk

    2006-01-03

    The CLIC (Compact Linear Collider) multi-lateral study group based at CERN is studying the technology for an electron-positron linear collider with a centre-of-mass energy up to 5 TeV. In contrast to the International Linear Collider (ILC) study which has chosen to use super-conducting cavities with accelerating gradients in the range of 30-40 MV/m to obtain centre-of-mass collision energies of 0.5-1 TeV, the CLIC study aims to use a normal-conducting system based on two-beam technology with gradients of 150 MV/m. It is generally accepted that this change in technology is not only necessary but the only viable choice for a cost-effective multi-TeV collider. The CLIC study group is studying the technology issues of such a machine, and is in particular developing state-of-the-art 30 GHz molybdenum-iris accelerating structures and power extraction and transfer structures (PETS). The accelerating structure has a new geometry which includes fully-profiled RF surfaces optimised to minimize surface fields, and hybrid damping using both iris slots and radial waveguides. A newly-developed structure-optimisation procedure has been used to simultaneously balance surface fields, power flow, short and long-range transverse wakefields, RF-to-beam efficiency and the ratio of luminosity to input power. The slotted irises allow a simple structure fabrication by high-precision high-speed 3D milling of just four pieces, and an even easier bolted assembly in a vacuum chamber.

  20. State Regulators Promote Consumer Choice in Retail Gas Markets

    Reports and Publications

    1996-01-01

    Restructuring of interstate pipeline companies has created new choices and challenges for local distribution companies (LDCs), their regulators, and their customers. The process of separating interstate pipeline gas sales from transportation service has been completed and has resulted in greater gas procurement options for LDCs.

  1. Caustic Recovery Technology | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Caustic Recovery Technology Caustic Recovery Technology Full Document and Summary Versions are available for download Caustic Recovery Technology (416.33 KB) Summary - Caustic Recovery Technology (53.85 KB) More Documents & Publications System Planning for Low-Activity Waste at Hanford CX-003496: Categorical Exclusion Determination 2013 Peer Review Presentations-Heat-Power and Biodeisel

  2. Thermally activated technologies: Technology Roadmap

    SciTech Connect

    None, None

    2003-05-01

    The purpose of this Technology Roadmap is to outline a set of actions for government and industry to develop thermally activated technologies for converting America’s wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. Fuel flexibility is important. The actions also cover thermally activated technologies that use fossil fuels, biomass, and ultimately hydrogen, along with waste heat.

  3. NREL: Technology Deployment - Technology Acceleration

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technology Acceleration NREL offers technology-specific assistance to federal and private industry to help address market barriers to sustainable energy technologies. Learn more about NREL's work in the following areas: Biopower and Waste-to-Energy Biopower and Waste-to-Energy Buildings Buildings Fuels, Vehicles, & Transportation Fuels, Vehicles, and Transportation Microgrid Design Microgrid Design Solar Solar Wind Wind Contact Us For more information on NREL's market transformation work,

  4. Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Roll to Roll (R2R) Processing 1 Technology Assessment 2 3 Contents 4 1. Introduction to the Technology/System ............................................................................................... 2 5 1.1. Introduction to R2R Processing..................................................................................................... 2 6 1.2. R2R Processing Mechanisms ......................................................................................................... 3 7 2.

  5. FY 2011 National Security Technologies, LLC, PER Summary | National...

    National Nuclear Security Administration (NNSA)

    FY 2011 National Security Technologies, LLC, PER Summary SUMMARY OF FY 2011 NATIONAL SECURITY TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total Available Fee Total Fee Earned % ...

  6. FY 2009 National Security Technologies, LLC, PER Summary | National...

    National Nuclear Security Administration (NNSA)

    FY 2009 National Security Technologies, LLC, PER Summary SUMMARY OF FY 2009 NATIONAL SECURITY TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total Available Fee Total Fee Earned % ...

  7. FY 2008 National Security Technologies, LLC, PER Summary | National...

    National Nuclear Security Administration (NNSA)

    FY 2008 National Security Technologies, LLC, PER Summary SUMMARY OF FY 2008 NATIONAL SECURITY TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total Available Fee Total Fee Earned % ...

  8. FY 2006 National Security Technologies, LLC, PER Summary | National...

    National Nuclear Security Administration (NNSA)

    FY 2006 National Security Technologies, LLC, PER Summary SUMMARY OF FY 2006 NATIONAL SECURITY TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total Available Fee Total Fee Earned % ...

  9. FY 2010 National Security Technologies, LLC, PER Summary | National...

    National Nuclear Security Administration (NNSA)

    FY 2010 National Security Technologies, LLC, PER Summary SUMMARY OF FY 2010 NATIONAL SECURITY TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total Available Fee Total Fee Earned % ...

  10. FY 2007 National Security Technologies, LLC, PER Summary | National...

    National Nuclear Security Administration (NNSA)

    FY 2007 National Security Technologies, LLC, PER Summary SUMMARY OF FY 2007 NATIONAL SECURITY TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total Available Fee Total Fee Earned % ...

  11. Desalination technology evaluation

    SciTech Connect

    Del Bene, J.V.; Loh, G.T.; Schleicher, R.W.; Sgammato, T.A.; Sinha, A.K. )

    1992-12-01

    The shortage of potable water has hindered economic development in South Florida and other areas of the United States. This project, cosponsored with Florida Power Light (FPL), examines the economics of colocation of a water desalination plant with an electric power plant to take advantage of shared facilities, personnel, and equipments well as existing intake and outfall structures. In combination, these factors should reduce the cost of desalinated water. The first step in determining the viability of colocation is identification of desalination technologies best suited for dual-purpose applications in retrofits at existing fossil plants. Based on energy efficiency and commercial maturity, reverse osmosis (RO) and low-temperature multieffect distillation (LT-MED) technologies appear to be the best candidates for such application. In fact, RO provides the best economics for the plants and conditions studied. Of the emerging technologies evaluated, sodium molecular pumping and solvent extraction technologies should be further investigated for their potential in significantly reducing desalination costs.

  12. Technology Commercialization Showcase 2008 Vehicle Technologies Program

    SciTech Connect

    Davis, Patrick B.

    2009-06-19

    Presentation illustrating various technology commercialization opportunities and unexploited investment gaps for the Vehicle Technologies Program.

  13. CX-008905: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Optimizing Accuracy of Determinations of Carbon Dioxide Storage Capacity and Permanence CX(s) Applied: A1, A9, B3.6 Date: 08/29/2012 Location(s): Wyoming Offices(s): National Energy Technology Laboratory

  14. CX-000768: Categorical Exclusion Determination

    Energy.gov [DOE]

    Determining the Variability of Continuous Mercury Monitors at Low Mercury LevelsCX(s) Applied: B3.6Date: 02/07/2010Location(s): Grand Forks, North DakotaOffice(s): Fossil Energy, National Energy Technology Laboratory

  15. CX-100019: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Determination of Rare Earths in Geothermal Brines and Evaluation of Potential Extraction Techniques CX(s) Applied: A9, B3.1, B3.6 Date: 08/18/2014 Location(s): California Offices(s): Golden Field Office Technology Office: Geothermal Technologies Award Number: DE-EE0006750

  16. IC-Compatible Technologies for Optical MEMS

    SciTech Connect

    Krygowski, T.W.; Sniegowski, J.J.

    1999-04-30

    Optical Micro Electro Mechanical Systems (Optical MEMS) Technology holds the promise of one-day producing highly integrated optical systems on a common, monolithic substrate. The choice of fabrication technology used to manufacture Optical MEMS will play a pivotal role in the size, functionality and ultimately the cost of optical Microsystems. By leveraging the technology base developed for silicon integrated circuits, large batches of routers, emitters, detectors and amplifiers will soon be fabricated for literally pennies per part. In this article we review the current status of technologies used for Optical MEMS, as well as fabrication technologies of the future, emphasizing manufacturable surface micromachining approaches to producing reliable, low-cost devices for optical communications applications.

  17. Updating and Enhancing the MA3T Vehicle Choice Model

    Office of Energy Efficiency and Renewable Energy (EERE)

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  18. Careers in science and technology

    SciTech Connect

    Not Available

    1993-09-01

    The objective of this book is to expose junior and senior high school students to the science and technology fields. It also will convey the importance of getting a general education in science and mathematics while still in high school and of continuing such studies in college. This is intended to encourge students, particularly underrepresented minorities and women, to consider and prepare for careers in science and technology. This book attempts to point out the increasing importance of such knowledge in daily life regardless of occupational choice. This book is intended to be used by junior and senior high school students, as a classroom reference by teachers, and by scientist and engineers participating in outreach activities.

  19. Tag: technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tags

    technology<...

  20. Technology Validation

    Energy.gov [DOE]

    To reduce solar technology risks, DOE and its partners evaluate the performance and reliability of novel photovoltaic (PV) hardware and systems through laboratory and field testing. The focus of...

  1. Categorical Exclusion Determinations: California | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    California Categorical Exclusion Determinations: California Location Categorical Exclusion Determinations issued for actions in California. DOCUMENTS AVAILABLE FOR DOWNLOAD September 22, 2016 CX-100759 Categorical Exclusion Determination Accelerating Market Adoption of Best-in-class Building Technologies, the Technology Demonstration Initiative (TDI) Award Number: DE-EE0007065 CX(s) Applied: A9, A11 Buildings Technologies Office Date: 9/20/2016 Location(s): CA Office(s): Golden Field Office

  2. BioenergizeME Infographic Challenge: Understanding America's Bioenergy Choices

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    produce renewable fuels, products, and power. This national challenge aims to inspire students to explore America's bioenergy choices and share what they learn with others. The Energy Department challenges you to investigate a bioenergy topic and design an infographic that illustrates your research. Register by February 3, 2017, at 5:00 p.m. central time. Follow us on #BioenergizeME. Questions? Email BioenergizeME@ee.doe.gov For more information, please visit

  3. BioenergizeME Infographic Challenge: Understanding America's Bioenergy Choices

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    produce renewable fuels, products, and power. This national challenge aims to inspire students to explore America's bioenergy choices and share what they learn with others. The Energy Department challenges you to investigate a bioenergy topic and design an infographic that illustrates your research. Register by February 3, 2017, at 5:00 p.m. central time. Follow us on #BioenergizeME. Questions? Email BioenergizeME@ee.doe.gov For more information, please visit

  4. Companies Can Reduce Carbon Footprint by Giving Consumers Green Choices -

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    News Releases | NREL Companies Can Reduce Carbon Footprint by Giving Consumers Green Choices NREL researchers studied online retailing, ride sharing, video streaming and short-term lodging options August 15, 2016 Photo of two men in front of computer screens NREL researchers (left to right) Scott Carmichael and Steven Isley review web sites in the Visualization Lab at the National Renewable Energy Laboratory (NREL) in Golden, CO. Companies can reduce the carbon footprint of their supply

  5. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    SciTech Connect

    M.A. Ebadian

    1999-10-31

    The Deactivation and Decommissioning (D&D) Technology Assessment Program (TAP) was developed to provide detailed, comparable data for environmental technologies and to disseminate this data to D&D professionals in a manner that will facilitate the review and selection of technologies to perform decontamination and decommissioning. The objectives for this project include the following: Determine technology needs through review of the Site Technology Coordination Group (STCG) information and other applicable websites and needs databases; Perform a detailed review of industries that perform similar activities as those required in D&D operations to identify additional technologies; Define the technology assessment program for characterization and waste management problem sets; Define the data management program for characterization, dismantlement, and waste management problem sets; Evaluate baseline and innovative technologies under standard test conditions at Florida International University's Hemispheric Center for Environmental Technology (FIU-HCET) and other locations and collect data in the areas of performance, cost, health and safety, operations and maintenance, and primary and secondary waste generation; Continue to locate, verify, and incorporate technology performance data from other sources into the multimedia information system; and Develop the conceptual design for a dismantlement technology decision analysis tool for dismantlement technologies.

  6. CX-100658 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CX-100658 Categorical Exclusion Determination Hydrogen Storage System Cost Assessment Award Number: DE-EE0007601 CX(s) Applied: A9 Fuel Cell Technologies Office Date: 7122016 ...

  7. CX-009549: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CX-009549: Categorical Exclusion Determination Vapor Transport Deposition for Thin Film ... to conduct research and development activities that advance solar photovoltaic technology. ...

  8. Hydac: Noncompliance Determination (2012-SE-4107)

    Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Hydac Technology Corporation finding that a variety of electric motor basic models do not comport with the energy conservation standards.

  9. Waste disposal technology transfer matching requirement clusters for waste disposal facilities in China

    SciTech Connect

    Dorn, Thomas; Nelles, Michael; Flamme, Sabine; Jinming, Cai

    2012-11-15

    suggested and a technology matrix is set out to ease the choice of technology to transfer and avoid past errors. The four steps are (1) Identification of plant owner/operator requirement clusters; (2) Determination of different municipal solid waste (MSW) treatment plant attributes; (3) Development of a matrix matching requirement clusters to plant attributes; (4) Application of Quality Function Deployment Method to aid in technology localisation. The technology transfer matrices thus derived show significant performance differences between the various technologies available. It is hoped that the resulting research can build a bridge between technology transfer research and waste disposal research in order to enhance the exchange of more sustainable solutions in future.

  10. Compressed Air Storage Strategies; Industrial Technologies Program...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    9 * August 2004 Industrial Technologies Program Suggested Actions * Review the plant's compressed air demand patterns to determine whether storage would be benefcial. * Examine the ...

  11. Stabilizing System Pressure; Industrial Technologies Program...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    8 * August 2004 Industrial Technologies Program Suggested Actions * Review compressed air applications and determine the required level of air pressure. * Review your compressed ...

  12. Maintaining System Air Quality; Industrial Technologies Program...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2 * August 2004 Industrial Technologies Program Suggested Actions * Review compressed air applica- tions and determine the required level of air quality for each. * Review the ...

  13. Microearthquake Technology for EGS Fracture Characterization

    Energy.gov [DOE]

    Project objectives: To understand how EGS fracture networks develop; To develop technology to determine accurate absolute three-dimensional positions of EGS fracture networks.

  14. Technology Roadmap Analysis 2013: Assessing Automotive Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Roadmap Analysis 2013: Assessing Automotive Technology R&D Relevant to DOE Power Electronics Cost Targets Technology Roadmap Analysis 2013: Assessing Automotive Technology R&D ...

  15. Biodetection Technologies for First Responders

    SciTech Connect

    Baird, Cheryl L.; Seiner, Derrick R.; Ozanich, Richard M.; Bartholomew, Rachel A.; Colburn, Heather A.; Straub, Tim M.; Bruckner-Lea, Cindy J.

    2012-10-24

    In a white powder scenario, there are a large number of field-deployable assays that can be used to determine if the suspicious substance contains biological material and warrants further investigation. This report summarizes commercially available technologies that are considered hand portable and can be used by first responders in the field. This is not meant to be an exhaustive list, nor do the authors endorse any of the technologies described herein. Rather, it is meant to provide useful information about available technologies to help end-users make informed decisions about biodetection technology procurement and use.

  16. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Roland Risser Director, Building Technologies Office Building Technologies Office Energy Efficiency Starts Here. 2 Building Technologies Office Integrated Approach: Improving ...

  17. CX-100587 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    7 Categorical Exclusion Determination CX-100587 Categorical Exclusion Determination H2 Refuel H-Prize Selection of Finalist Award Number: NA CX(s) Applied: A9 Fuel Cells Technology ...

  18. Ventilation technologies scoping study

    SciTech Connect

    Walker, Iain S.; Sherman, Max H.

    2003-09-30

    This document presents the findings of a scoping study commissioned by the Public Interest Energy Research (PIER) program of the California Energy Commission to determine what research is necessary to develop new residential ventilation requirements for California. This study is one of three companion efforts needed to complete the job of determining the needs of California, determining residential ventilation requirements, and determining appropriate ventilation technologies to meet these needs and requirements in an energy efficient manner. Rather than providing research results, this scoping study identifies important research questions along with the level of effort necessary to address these questions and the costs, risks, and benefits of pursuing alternative research questions. In approaching these questions and level of effort, feasibility and timing were important considerations. The Commission has specified Summer 2005 as the latest date for completing this research in time to update the 2008 version of California's Energy Code (Title 24).

  19. Manufacturing technologies

    SciTech Connect

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  20. (Environmental technology)

    SciTech Connect

    Boston, H.L.

    1990-10-12

    The traveler participated in a conference on environmental technology in Paris, sponsored by the US Embassy-Paris, US Environmental Protection Agency (EPA), the French Environmental Ministry, and others. The traveler sat on a panel for environmental aspects of energy technology and made a presentation on the potential contributions of Oak Ridge National Laboratory (ORNL) to a planned French-American Environmental Technologies Institute in Chattanooga, Tennessee, and Evry, France. This institute would provide opportunities for international cooperation on environmental issues and technology transfer related to environmental protection, monitoring, and restoration at US Department of Energy (DOE) facilities. The traveler also attended the Fourth International Conference on Environmental Contamination in Barcelona. Conference topics included environmental chemistry, land disposal of wastes, treatment of toxic wastes, micropollutants, trace organics, artificial radionuclides in the environment, and the use biomonitoring and biosystems for environmental assessment. The traveler presented a paper on The Fate of Radionuclides in Sewage Sludge Applied to Land.'' Those findings corresponded well with results from studies addressing the fate of fallout radionuclides from the Chernobyl nuclear accident. There was an exchange of new information on a number of topics of interest to DOE waste management and environmental restoration needs.

  1. Plasma technology

    SciTech Connect

    Herlitz, H.G.

    1986-11-01

    This paper describes the uses of plasma technology for the thermal destruction of hazardous wastes such as PCBs, dioxins, hydrocarbons, military chemicals and biological materials; for metals recovery from steel making dusts. One advantage of the process is that destruction of wastes can be carried out on site. Systems in several countries use the excess thermal energy for district heating.

  2. Energy and technology review

    SciTech Connect

    Not Available

    1982-08-01

    Three areas of research are discussed: microcomputer technology applied to inspecting machined parts to determine roundness in ultraprecision measurements; development of an electrolytic technique for preparing dinitrogen pentoxide as a potentially less expensive step in the large-scale synthesis of the explosive HMX; and the application of frequency conversion to short wavelengths in the Novette and Nova lasers to improve the performance of inertial-confinement fusion targets. (GHT)

  3. Human choice and climate change. Four volume set

    SciTech Connect

    Rayner, S.; Malone, E.L.

    1997-12-31

    The four-volume set assesses social science research relevant to global climate change from a wide-ranging interdisciplinary perspective. Taking human choice within social institutions as the starting point, noted researchers examine climate change issues in the context of societal issues such as population and consumption; cultural, institutional, and economic arrangements for human well-being; and the social processes by which decisions are made from local to global levels. This four-volume assessment is intended to complement the work of the intergovernmental Panel on Climate Change.

  4. Ceramic Technology Project

    SciTech Connect

    Not Available

    1992-03-01

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  5. Technological Feasibility and Cost Analysis | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Systems Analysis » Analysis Methodologies » Technological Feasibility and Cost Analysis Technological Feasibility and Cost Analysis Technology Feasibility and Cost Analysis is performed to determine the potential economic viability of a process or technology, and helps to identify which technologies have the greatest likelihood of economic success. Results from technology feasibility analysis efforts provide input to balanced portfolio development and technology validation plans. The economic

  6. Tracers and Exploration Technologies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Tracers and Exploration Technologies Tracers and Exploration Technologies Below are the project presentations and respective peer review results for Tracers and Exploration Technologies. Using Thermally-Degrading, Partitioning, and Nonreactive Tracers to Determine Temperature Distribution and Fracture/Heat Transfer Surface Area in Geothermal Reservoirs, Thomas Watson, Brookhaven National Laboratory; Paul W. Reimus, Los Alamos National Laboratory; Vince Vermeul, Pacific Northwest National

  7. How new ozone particulate matter rules will affect fuel choices?

    SciTech Connect

    Kelly, L.

    1998-07-01

    EPA, OTC and OTAG are all coming out with new air emissions rules for electric utility plants. The economic impact of these new rules is certain to be far-reaching and influence fuel choices, capital investments and electric plant dispatch decisions. Recent studies by Hill and Associates of these emerging rules and their economic impacts under deregulation indicate significant shifting of fuel choices and strong inter-regional wheeling of electricity. The author discusses the following: Which NERC regions fare best and worst under the combination of deregulation and the environmental rules? Whether just switching to cleaner coal will be enough for most coal plants? How coal usage is stimulated by electric utility deregulations? How electric utility mergers affect the economics of environmental compliance? Projections of future SO{sub 2} allowance prices. Why NO{sub x} allowance will likely follow a different price path then SO{sub 2} allowances? How coal prices are likely to respond to increased fuel switching? Which electric transmission bottlenecks are critical to environmental and economic dispatch?

  8. AVLIS: The technology for the future

    SciTech Connect

    Rifakes, G.

    1994-12-31

    Gaseous diffusion plants have been in operation for more than 40 yr. Recognizing that these plants have a finite life, the U.S. Department of Energy (DOE) in the early 1970s began investing in advanced technologies to determine which technology would be best suited to replace these plants. The two technologies pursued by the DOE were atomic vapor laser isotope separation (AVLIS) and gas centrifuge. In 1984, the DOE determined that it was in its best interest to stop work on centrifuge technology and to continue AVLIS research. In excess of $1 billion has been sent to further the AVLIS technology.

  9. Software Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Software Software Technology Enabling a new era of computational and scientific capabilities by advancing high-performance computing on an exponential scale. Contacts Galen Shipman Applied Computer Science (505) 665-4021 Email Michael Lang Computer, Computational, and Statistical Sciences (505) 500-2993 Email James Ahrens Applied Computer Science (505) 667-5797 Email Video thumbnail image for ExaSky software 3:21 ExaSky: Next-generation dark matter cosmology simulations (demonstration) The

  10. Building Technologies Office Overview

    SciTech Connect

    2013-04-01

    Building Technologies Office Overview Presentation for the 2013 Building Technologies Office's Program Peer Review

  11. Emerging technologies

    SciTech Connect

    Lu, Shin-yee

    1993-03-01

    The mission of the Emerging Technologies thrust area at Lawrence Livermore National Laboratory is to help individuals establish technology areas that have national and commercial impact, and are outside the scope of the existing thrust areas. We continue to encourage innovative ideas that bring quality results to existing programs. We also take as our mission the encouragement of investment in new technology areas that are important to the economic competitiveness of this nation. In fiscal year 1992, we have focused on nine projects, summarized in this report: (1) Tire, Accident, Handling, and Roadway Safety; (2) EXTRANSYT: An Expert System for Advanced Traffic Management; (3) Odin: A High-Power, Underwater, Acoustic Transmitter for Surveillance Applications; (4) Passive Seismic Reservoir Monitoring: Signal Processing Innovations; (5) Paste Extrudable Explosive Aft Charge for Multi-Stage Munitions; (6) A Continuum Model for Reinforced Concrete at High Pressures and Strain Rates: Interim Report; (7) Benchmarking of the Criticality Evaluation Code COG; (8) Fast Algorithm for Large-Scale Consensus DNA Sequence Assembly; and (9) Using Electrical Heating to Enhance the Extraction of Volatile Organic Compounds from Soil.

  12. Technology disrupted

    SciTech Connect

    Papatheodorou, Y.

    2007-02-15

    Three years ago, the author presented a report on power generation technologies which in summary said 'no technology available today has the potential of becoming transformational or disruptive in the next five to ten years'. In 2006 the company completed another strategic view research report covering the electric power, oil, gas and unconventional energy industries and manufacturing industry. This article summarises the strategic view findings and then revisits some of the scenarios presented in 2003. The cost per megawatt-hour of the alternatives is given for plants ordered in 2005 and then in 2025. The issue of greenhouse gas regulation is dealt with through carbon sequestration and carbon allowances or an equivalent carbon tax. Results reveal substantial variability through nuclear power, hydro, wind, geothermal and biomass remain competitive through every scenario. Greenhouse gas scenario analysis shows coal still be viable, albeit less competitive against nuclear and renewable technologies. A carbon tax or allowance at $24 per metric ton has the same effect on IGCC cost as a sequestration mandate. However, the latter would hurt gas plants much more than a tax or allowance. Sequestering CO{sub 2} from a gas plant is almost as costly per megawatt-hour as for coal. 5 refs., 5 figs., 5 tabs.

  13. New technologies for refrigeration without CFCs

    SciTech Connect

    Swift, G.W.

    1992-09-01

    Today the appliance industry and other cooling industries are facing the double challenge of eliminating environmentally harmful CFCs while simultaneously improving energy efficiency. These challenges will force this industry to make tremendous changes and to work out many difficult problems, ranging from choice of technology through production-line retooling to product-liability concerns. Three new cooling technologies--sonic compression, thermoacoustic refrigeration, and Malone refrigeration--have been developed at least in part at Los Alamos National Laboratory. We will discuss the principles, features, and status of each of these three technologies. With these three examples we hope to show that mechanical compression and subsequent evaporation of CFCs is not the only potentially practical way to produce cooling. These examples are only three of many alternative cooling technologies. No new technology can be guaranteed a success before development is complete, from either an economic or engineering point of view. But enough alternative cooling technologies exist, and the probability for success of each technology is high enough, that one or more of these technologies can almost certainly be produced at reasonable cost, eliminate CFCS, and reduce the consumption of electricity.

  14. Technology Development Roadmaps - a Systematic Approach to Maturing Needed Technologies

    SciTech Connect

    John W. Colllins; Layne Pincock

    2010-07-01

    Abstract. Planning and decision making represent important challenges for all projects. This paper presents the steps needed to assess technical readiness and determine the path forward to mature the technologies required for the Next Generation Nuclear Plant. A Technology Readiness Assessment is used to evaluate the required systems, subsystems, and components (SSC) comprising the desired plant architecture and assess the SSCs against established Technology Readiness Levels (TRLs). A validated TRL baseline is then established for the proposed physical design. Technology Development Roadmaps are generated to define the path forward and focus project research and development and engineering tasks on advancing the technologies to increasing levels of maturity. Tasks include modeling, testing, bench-scale demonstrations, pilot-scale demonstrations, and fully integrated prototype demonstrations. The roadmaps identify precise project objectives and requirements; create a consensus vision of project needs; provide a structured, defensible, decision-based project plan; and, minimize project costs and schedules.

  15. Testing technology

    SciTech Connect

    Not Available

    1993-10-01

    This bulletin from Sandia National Laboratories presents current research highlights in testing technology. Ion microscopy offers new nondestructive testing technique that detects high resolution invisible defects. An inexpensive thin-film gauge checks detonators on centrifuge. Laser trackers ride the range and track helicopters at low-level flights that could not be detected by radar. Radiation transport software predicts electron/photon effects via cascade simulation. Acoustic research in noise abatement will lead to quieter travelling for Bay Area Rapid Transport (BART) commuters.

  16. TECHNOLOGY TRANSFER

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    404-NOV. 1, 2000 TECHNOLOGY TRANSFER COMMERCIALIZATION ACT OF 2000 VerDate 11-MAY-2000 04:52 Nov 16, 2000 Jkt 089139 PO 00000 Frm 00001 Fmt 6579 Sfmt 6579 E:\PUBLAW\PUBL404.106 APPS27 PsN: PUBL404 114 STAT. 1742 PUBLIC LAW 106-404-NOV. 1, 2000 Public Law 106-404 106th Congress An Act To improve the ability of Federal agencies to license federally owned inventions. Be it enacted by the Senate and House of Representatives of the United States of America in Congress assembled, SECTION 1. SHORT

  17. Technology Name

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Tech Fact Sheet Site Project & Identifier Tech Stage: Development DE-EM0000598 D&D KM-IT For the deployment of Information Technology for D&D knowledge management Page 1 of 2 Florida International University Florida D&D Knowledge Management Information Tool Challenge Deactivation and decommissioning (D&D) work is a high priority across the DOE Complex. The D&D community associated with the various DOE sites has gained extensive knowledge and experience over the years. To

  18. Choices in the design of weathering tests for fenestration systems

    SciTech Connect

    Masters, L.W.; Scott, J.L.; Bond, L.F.

    1995-12-31

    Manufactured products, such as fenestration systems and the materials comprising the systems, are often observed to degrade due to exposure to the elements of weather. While standard and nonstandard methods have been developed to provide a means of assessing the effect of weathering, questions often arise concerning the relationship of resultant test data with actual in-service performance. In view of the questions concerning the relevance of test data and the rapidly growing focus on quality assurance, there is strong interest in developing improved test protocols. This paper focuses on the key choices that must be made in the design of weathering tests and includes identification of the currently available methods used for weathering of fenestration systems and the primary shortcomings of those methods.

  19. Categorical Exclusion Determinations: Washington | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Washington Categorical Exclusion Determinations: Washington Location Categorical Exclusion Determinations issued for actions in Washington. DOCUMENTS AVAILABLE FOR DOWNLOAD August 11, 2016 CX-100683 Categorical Exclusion Determination Developing a low cost, high volume and scalable manufacturing technology for undoped and heavily p-type doped CdTe feedstock materials Award Number: DE-EE0007537 CX(s) Applied: A9, B3.6 Solar Energy Technologies Office Date: 8/1/2016 Location(s): WA Office(s):

  20. Building Technologies Office Window and Envelope Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building Technologies Office Window and Envelope Technologies Emerging Technologies R&D Program Karma Sawyer, Ph.D. karma.sawyer@ee.doe.gov BTO Goal Reduce building energy use by ...

  1. Materials challenges in advanced coal conversion technologies

    SciTech Connect

    Powem, C.A.; Morreale, B.D.

    2008-04-15

    Coal is a critical component in the international energy portfolio, used extensively for electricity generation. Coal is also readily converted to liquid fuels and/or hydrogen for the transportation industry. However, energy extracted from coal comes at a large environmental price: coal combustion can produce large quantities of ash and CO{sub 2}, as well as other pollutants. Advanced technologies can increase the efficiencies and decrease the emissions associated with burning coal and provide an opportunity for CO{sub 2} capture and sequestration. However, these advanced technologies increase the severity of plant operating conditions and thus require improved materials that can stand up to the harsh operating environments. The materials challenges offered by advanced coal conversion technologies must be solved in order to make burning coal an economically and environmentally sound choice for producing energy.

  2. Energy technologies and their impact on demand

    SciTech Connect

    Drucker, H.

    1995-06-01

    Despite the uncertainties, energy demand forecasts must be made to guide government policies and public and private-sector capital investment programs. Three principles can be identified in considering long-term energy prospects. First energy demand will continue to grow, driven by population growth, economic development, and the current low per capita energy consumption in developing countries. Second, energy technology advancements alone will not solve the problem. Energy-efficient technologies, renewable resource technologies, and advanced electric power technologies will all play a major role but will not be able to keep up with the growth in world energy demand. Third, environmental concerns will limit the energy technology choices. Increasing concern for environmental protection around the world will restrict primarily large, centralized energy supply facilities. The conclusion is that energy system diversity is the only solution. The energy system must be planned with consideration of both supply and demand technologies, must not rely on a single source of energy, must take advantage of all available technologies that are specially suited to unique local conditions, must be built with long-term perspectives, and must be able to adapt to change.

  3. NETL Technologies Recognized for Technology Development, Transfer |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Recognized for Technology Development, Transfer NETL Technologies Recognized for Technology Development, Transfer October 25, 2013 - 1:31pm Addthis Did you know? The Federal Laboratory Consortium for Technology Transfer is the nationwide network of federal laboratories that provides the forum to develop strategies and opportunities for linking laboratory mission technologies and expertise with the marketplace. In consonance with the Federal Technology Transfer Act of

  4. High Impact Technology Catalyst: Technology Deployment Strategies |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Catalyst: Technology Deployment Strategies High Impact Technology Catalyst: Technology Deployment Strategies The Energy Department released the High Impact Technology Catalyst: Technology Deployment Strategies to serve as an overview of the HIT Catalyst program activities, including a summary of the selection process undertaken to identify, evaluate and prioritize the current HITs, descriptions of the technologies and markets for each HIT, and plans for deployment. High

  5. Nuclear Science & Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Nuclear Science & Technology Nuclear Science & Technology1354608000000Nuclear Science & TechnologySome of these resources are LANL-only and will require Remote Access. No...

  6. NREL: Technology Transfer - Ombuds

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technology Transfer Ombuds NREL's Technology Transfer Ombuds offers an informal process to help resolve issues and concerns regarding the laboratory's technology partnership,...

  7. Hydrogen Technologies Group

    SciTech Connect

    Not Available

    2008-03-01

    The Hydrogen Technologies Group at the National Renewable Energy Laboratory advances the Hydrogen Technologies and Systems Center's mission by researching a variety of hydrogen technologies.

  8. Distributed Energy Technology Characterization (Desiccant Technologies...

    Energy.gov [DOE] (indexed site)

    desiccant technology and applications, and to show how these technologies can be designed to utilize the available thermal energy from a combined heat and power (CHP) system. ...

  9. Vehicle Technologies Office: 2009 Advanced Vehicle Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Well-to-Wheels Analysis of Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric Vehicles Vehicle Technologies Office: 2008 Advanced Vehicle Technology Analysis and ...

  10. Vehicle Technologies Office: 2014 Electric Drive Technologies...

    Energy.gov [DOE] (indexed site)

    Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge ...

  11. Testing technology. A Sandia Technology Bulletin

    SciTech Connect

    Goetsch, B.; Floyd, H.L.; Doran, L.

    1994-02-01

    This Sandia publication seeks to facilitate technology exchange with industries, universities, and government agencies. It presents brief highlights of four projects. First is a project to simulate the use of airbags to soften the landing of a probe on Mars. Second is the use of a computer simulation system to facilitate the testing of designs for different experiments, both for experimental layout and results analysis. Third is the development of a system for in-house testing of batteries and capacitive energy storage systems, for deployment at the manufacturing sites, as opposed to final use areas. Finally is information on a noncontact measurement system which can be used to determine axes on objects of different shapes, with high precision.

  12. Technology Maturation Plan (TMP) Fluidized Bed Steam Reforming (FBSR)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technology for Tank 48H Treatment Project (TTP) | Department of Energy Fluidized Bed Steam Reforming (FBSR) Technology for Tank 48H Treatment Project (TTP) Technology Maturation Plan (TMP) Fluidized Bed Steam Reforming (FBSR) Technology for Tank 48H Treatment Project (TTP) This assessment determines the technology maturity level of the candidate Tank 48H treatment technologies that are being considered for implementation at DOE's SRS - specifically Fluidized Bed Steam Reformer System.

  13. Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

    SciTech Connect

    Yeh, B.

    2011-03-01

    This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

  14. Materials issues in lithium ion rechargeable battery technology

    SciTech Connect

    Doughty, D.H.

    1995-07-01

    Lithium ion rechargeable batteries are predicted to replace Ni/Cd as the workhorse consumer battery. The pace of development of this battery system is determined in large part by the availability of materials and the understanding of interfacial reactions between materials. Lithium ion technology is based on the use of two lithium intercalating electrodes. Carbon is the most commonly used anode material, while the cathode materials of choice have been layered lithium metal chalcogenides (LiMX{sub 2}) and lithium spinel-type compounds. Electrolytes may be either organic liquids or polymers. Although the first practical use of graphite intercalation compounds as battery anodes was reported in 1981 for molten salt cells and in 1983 for ambient temperature systems, it was not until Sony Energytech announced a new lithium ion intercalating carbon anode in 1990, that interest peaked. The reason for this heightened interest is that these electrochemical cells have the high energy density, high voltage and light weight of metallic lithium, but without the disadvantages of dendrite formation on charge, improving their safety and cycle life.

  15. 2016 Annual Technology Baseline

    DOE Data Explorer

    Hand, Maureen; Kurup, Parthiv

    2016-09-15

    Current and future cost and performance data for electricity generating technologies, including both renewable and conventional technologies.

  16. Assessment of coal technology options and implications for the State of Hawaii

    SciTech Connect

    Carlson, J.L.; Elcock, D.; Elliott, T.J.

    1993-12-01

    The mandate of this research report was to provide the state of Hawaii with an assessment of the potential opportunities and drawbacks of relying on coal-fired generating technologies to diversify its fuel mix and satisfy future electric power requirements. This assessment was to include a review of existing and emerging coal-based power technologies-including their associated costs, environmental impacts, land use, and infrastructure requirements-to determine the range of impacts likely to occur if such systems were deployed in Hawaii. Coupled with this review, the report was also to (1) address siting and safety issues as they relate to technology choice and coal transport, (2) consider how environmental costs associated with coal usage are included in the integrated resource planning (ERP) process, and (3) develop an analytical tool from which the Department of Business, Economic Development & Tourism of the State of Hawaii could conduct first-order comparisons of power plant selection and siting. The prepared report addresses each element identified above. However, available resources and data limitations limited the extent to which particular characteristics of coal use could be assessed. For example, the technology profiles are current but not as complete regarding future developments and cost/emissions data as possible, and the assessment of coal technology deployment issues in Hawaii was conducted on an aggregate (not site-specific) basis. Nonetheless, the information and findings contained in this report do provide an accurate depiction of the opportunities for and issues associated with coal utilization in the state of Hawaii.

  17. CX-008738: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Determination of Microstructure and Chemical State Changes in Ion-Irradiated Fuels and Structural Components with a High Kinetic Energy Electron Detector – Illinois Institute of Technology CX(s) Applied: B3.6 Date: 05/22/2012 Location(s): Idaho Offices(s): Idaho Operations Office

  18. CX-002602: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Determining Optimal Fuel Performance in Adapting Onsite Electrical Generation Platforms to Operate on Producer Gas from Fuels of OpportunityCX(s) Applied: A9, A11Date: 12/11/2009Location(s): Minneapolis, MinnesotaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  19. CX-002600: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Determining Optimal Fuel Performance in Adapting Onsite Electrical Generation Platforms to Operate on Producer Gas from Fuels of OpportunityCX(s) Applied: B3.6Date: 12/11/2009Location(s): Minneapolis, MinnesotaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  20. CX-002599: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Determining Optimal Fuel Performance in Adapting Onsite Electrical Generation Platforms to Operate on Producer Gas from Fuels of OpportunityCX(s) Applied: B3.6Date: 12/11/2009Location(s): Berkeley, CaliforniaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  1. CX-002598: Categorical Exclusion Determination

    Energy.gov [DOE]

    Determining Optimal Fuel Performance in Adapting Onsite Electrical Generation Platforms to Operate on Producer Gas from Fuels of OpportunityCX(s) Applied: B3.6Date: 12/11/2009Location(s): Morris, MinnesotaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  2. CX-002601: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Determining Optimal Fuel Performance in Adapting Onsite Electrical Generation Platforms to Operate on Producer Gas from Fuels of OpportunityCX(s) Applied: B3.6Date: 12/11/2009Location(s): Fridley, MinnesotaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  3. CX-000373: Categorical Exclusion Determination

    Energy.gov [DOE]

    Measurements of 222 Radon, 220 Radon, and Carbon Dioxide Emissions in Natural Carbon Dioxide Fields in Wyoming: Monitoring, Verification, and Analysis Techniques for Determining Gas Transport and Caprock IntegrityCX(s) Applied: A1, A9, B3.6, B3.8Date: 11/20/2009Location(s): Laramie, WyomingOffice(s): Fossil Energy, National Energy Technology Laboratory

  4. CX-100558 Categorical Exclusion Determination

    Energy.gov [DOE]

    Final Determination of Coverage for Portable Air Conditioners (1904-AD02) RIN 1904-AD02 CX(s) Applied: A6 EERE-Buildings Technology Program Date: 03/03/2016 Location(s): Nationwide Office(s): Golden Field Office

  5. CX-100312 Categorical Exclusion Determination

    Energy.gov [DOE]

    Withdrawal of Proposed Determination Regarding Energy Conservation Program: Natural Draft Commercial Boilers RIN: 1904-AD01 CX(s) Applied: A5 EERE- Buildings Technology Program Date: 07/20/2015 Location(s): Nationwide Office(s): Golden Field Office

  6. PowerChoice Residential Customer Response to TOU Rates

    SciTech Connect

    Peters, Jane S.; Moezzi, Mithra; Lutzenhiser, Susan; Woods, James; Dethman, Linda; Kunkle, Rick

    2009-10-01

    Research Into Action, Inc. and the Sacramento Municipal Utility District (SMUD) worked together to conduct research on the behaviors and energy use patterns of SMUD residential customers who voluntarily signed on to a Time-of-Use rate pilot launched under the PowerChoice label. The project was designed to consider the how and why of residential customers ability and willingness to engage in demand reduction behaviors, and to link social and behavioral factors to observed changes in demand. The research drew on a combination of load interval data and three successive surveys of participating households. Two experimental treatments were applied to test the effects of increased information on households ability to respond to the Time-of-Use rates. Survey results indicated that participants understood the purpose of the Time-of-Use rate and undertook substantial appropriate actions to shift load and conserve. Statistical tests revealed minor initial price effects and more marked, but still modest, adjustments to seasonal rate changes. Tests of the two information interventions indicated that neither made much difference to consumption patterns. Despite the lackluster statistical evidence for load shifting, the analysis points to key issues for critical analysis and development of residential Time-of-Use rates, especially pertinent as California sets the stage for demand response in more California residences.

  7. Technology Partnership Agreements | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technology Investment Agreements Technology Investment Agreements Guidance Policy Flash 2006-31 - Technology Investment Agreements Financial Assistance Letter 2006-03 - Guidance for Awarding Technology Investment Agreements Final Rule - Financial Assistance Regulations - Technology Investment Agreements Templates Company Template (Expenditure-Based) Consortium Template (Expenditure-Based) Company Template (Fixed Support) Consortium Support (Fixed Support) Training Technology Investment

  8. Vehicle Technologies Office Propulsion Materials Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Technologies Office Propulsion Materials Technologies Jerry Gibbs eere.energy.gov 2 | Vehicle Technologies Program Materials Technologies Materials Technologies $35.6 M Lightweight Materials $28.5 M Values are FY15 enacted Propulsion Materials $7.1 M Properties and Manufacturing Multi-Material Enabling Modeling & Computational Mat. Sci. Engine Materials, Cast Al & Fe High Temp Alloys Exhaust Sys. Materials, Low T Catalysts Lightweight Propulsion FY13 Enacted $27.5 M $11.9 M FY14

  9. Algorithm for Accounting for the Interactions of Multiple Renewable Energy Technologies in Estimation of Annual Performance

    Energy Science and Technology Software Center

    2007-12-31

    The algorithm accounts for interactions between technologies in determining the annual energy performance of multiple renewable energy technologies at a subject site.

  10. Desalination technology evaluation. Final report

    SciTech Connect

    Del Bene, J.V.; Loh, G.T.; Schleicher, R.W.; Sgammato, T.A.; Sinha, A.K.

    1992-12-01

    The shortage of potable water has hindered economic development in South Florida and other areas of the United States. This project, cosponsored with Florida Power & Light (FPL), examines the economics of colocation of a water desalination plant with an electric power plant to take advantage of shared facilities, personnel, and equipments well as existing intake and outfall structures. In combination, these factors should reduce the cost of desalinated water. The first step in determining the viability of colocation is identification of desalination technologies best suited for dual-purpose applications in retrofits at existing fossil plants. Based on energy efficiency and commercial maturity, reverse osmosis (RO) and low-temperature multieffect distillation (LT-MED) technologies appear to be the best candidates for such application. In fact, RO provides the best economics for the plants and conditions studied. Of the emerging technologies evaluated, sodium molecular pumping and solvent extraction technologies should be further investigated for their potential in significantly reducing desalination costs.

  11. Making Sustainable Energy Choices: Insights on the Energy/Water/Land Nexus

    SciTech Connect

    Not Available

    2014-10-01

    This periodic publication summarizes insights from the body of NREL analysis work. In this issue of Analysis Insights, we examine the implications of our energy choices on water, land use, climate, developmental goals, and other factors. Collectively, NREL's work helps policymakers and investors understand and evaluate energy choices within the complex web of connections, or nexus, between energy, water, and land.

  12. Is Carbon a Realistic Choice for ITER's Divertor?

    SciTech Connect

    C.H. Skinner; G. Federici

    2005-05-13

    Tritium retention by co-deposition with carbon on the divertor target plate is predicted to limit ITER's DT burning plasma operations (e.g. to about 100 pulses for the worst conditions) before the in-vessel tritium inventory limit, currently set at 350 g, is reached. At this point, ITER will only be able to continue its burning plasma program if technology is available that is capable of rapidly removing large quantities of tritium from the vessel with over 90% efficiency. The removal rate required is four orders of magnitude faster than that demonstrated in current tokamaks. Eighteen years after the observation of co-deposition on JET and TFTR, such technology is nowhere in sight. The inexorable conclusion is that either a major initiative in tritium removal should be funded or that research priorities for ITER should focus on metal alternatives.

  13. Element choices for explicit and implicit nonlinear finite-element computation. ISPRA courses on structural dynamics - lecture notes

    SciTech Connect

    Goudreau, G.L.

    1983-05-01

    The confrontation of the finite element technology with the awesome number crunching required for the nonlinear problem has forced a new assessment. The finite element community discovered that for impact, wave propagation and even slower impulsively driven dynamic problems, the finite difference hydrocodes were much more efficient, albeit requiring contorted mesh topologies to model practical geometries and fifty thousand time steps to follow a quasi-static process or reach static equilibrium. The experience of engineering analysis at the Lawrence Livermore National Laboratory has straddled both worlds, and the intent of this lecture is to review choices in the context of the two and three dimensional implicit and explicit Lagrangian codes developed in our Methods Development Group. The explicit DYNA2D and DYNA3D and implicit NIKE2D and NIKE3D of Hallquist form the focus of this discussion.

  14. Improved current control makes inverters the power sources of choice

    SciTech Connect

    Yamamoto, H.; Harada, S.; Ueyama, T.

    1997-02-01

    It is now generally understood that by increasing the operating or switching frequency of a power source the size of the main transformer and main reactor can be shrunk. Thus, a 300-A DC welding power source weighing well under 100 lb can be produced. This makes the inverter power source an ideal choice for applications requiring equipment maneuverability. It is also generally understood that due to higher switching frequencies, a smoother output is obtained from inverter power sources. In the late 1980s, the company developed a new double-inverter power source by which inverted DC weld output is inverted back to AC weld output. This product was the first of its kind in the world. Again, the small compact size of this product was of great interest. Utilizing current waveform control, it was realized that fast response switching from electrode negative to electrode positive could be accurately controlled, offering benefits such as AC GTA welding with high-frequency start only, even at a low welding current. The primary benefit is the ability to limit the electrode positive half cycle to less than 5%. The electrode positive half cycle is responsible for tungsten erosion, which also creates the balling effect of a tungsten electrode. By limiting the electrode positive portion of the AC cycle to a very low level, a rather sharp point can be maintained on the tungsten, which creates a very concentrated, focused arc column. This ability provides excellent joint penetration in fillet welding of aluminum alloys, especially on thick plate. It also reduces the heat-affected zone in AC GTA welding of aluminum.

  15. CX-100021: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CX-100021: Categorical Exclusion Determination National Wind Technology Center Road Repairs; NREL Tracking No. 14-016 Award Number: DE-AC36-08GO28308 CX(s) Applied: DOEEA-1914 ...

  16. Categorical Exclusion (CX) Determinations By Date | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Categorical Exclusion Determination Reducing Soft Costs through Hardware Innovation - Phase II Award Number: DE- EE-0007199 CX(s) Applied: A9, B3.6 Solar Energy Technologies...

  17. CX-100270 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Determination Proposed Rulemaking for Energy Conservation Standards for Ceiling Fan Light Kits RIN: 1904-AC87 CX(s) Applied: B5.1 EERE- Buildings Technology Program Date:...

  18. Categorical Exclusion Determinations: New York | Department of...

    Energy Saver

    ... February 26, 2016 CX-100505 Categorical Exclusion Determination Watt-sun: A Multi-scale, ... EE-0007274 CX(s) Applied: A9, B3.6 Fuel Cell Technologies Office Date: 11032015 ...

  19. CX-007065: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Categorical Exclusion Determination Slipstream Pilot-Scale Demonstration of a Novel Amine-Based Post-Combustion Technology for Carbon Dioxide Capture CX(s) Applied: B3.6...

  20. Universal: Noncompliance Determination (2013-SE-26004)

    Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Universal Lighting Technologies, Inc. finding that fluorescent lamp ballast model B140R277HP does not comport with the energy conservation standards.

  1. GETEM -Geothermal Electricity Technology Evaluation Model

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1 GETEM -Geothermal Electricity Technology Evaluation Model Background: GETEM was originally developed for the Department of Energy's Geothermal Technologies Program to provide both a method for quantifying the power generation cost from geothermal energy, and a means of assessing how technology advances might impact those generation costs. Generation cost is determined as the Levelized-Cost-of-Electricity (LCOE). The model is intended to provide representative estimates of cost and performance

  2. Clean Energy Manufacturing Resources - Technology Feasibility | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Find resources to help you evaluate the feasibility of your idea for a new clean energy technology or product. For determining feasibility, areas to consider include U.S. Department of Energy (DOE) priorities, licensing, R&D funding, and strategic project partnerships. For more resources, see the Clean Energy Manufacturing Federal Resource

  3. Categorical Exclusion Determinations: Connecticut | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Connecticut Categorical Exclusion Determinations: Connecticut Location Categorical Exclusion Determinations issued for actions in Connecticut. DOCUMENTS AVAILABLE FOR DOWNLOAD September 9, 2016 CX-100751 Categorical Exclusion Determination High Performance PEFC Electrode Structures Award Number: DE-EE0007652 CX(s) Applied: A9, B3.6, B3.15 Fuel Cell Technologies Office Date: 8/11/2016 Location(s): CT Office(s): Golden Field Office September 8, 2016 CX-100740 Categorical Exclusion Determination

  4. Categorical Exclusion Determinations: Hawaii | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hawaii Categorical Exclusion Determinations: Hawaii Location Categorical Exclusion Determinations issued for actions in Hawaii. DOCUMENTS AVAILABLE FOR DOWNLOAD June 12, 2016 CX-100638 Categorical Exclusion Determination Comprehensive analysis of Hawaii's geothermal potential through Play Fairway Award Number: DE-EE0006729 CX(s) Applied: A9, B3.1 Geothermal Technologies Office Date: 6/2/2016 Location(s): HI Office(s): Golden Field Office May 2, 2016 CX-100598 Categorical Exclusion Determination

  5. Categorical Exclusion Determinations: Kansas | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Kansas Categorical Exclusion Determinations: Kansas Location Categorical Exclusion Determinations issued for actions in Kansas. DOCUMENTS AVAILABLE FOR DOWNLOAD February 26, 2015 CX-013396: Categorical Exclusion Determination Field Demonstration of Chemical Flooding of the Trembley Oilfield, Reno County, Kansas CX(s) Applied: A9, B3.6 Date: 02/26/2015 Location(s): Kansas Offices(s): National Energy Technology Laboratory January 26, 2015 CX-100179 Categorical Exclusion Determination Wind Energy

  6. Categorical Exclusion Determinations: Kentucky | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Kentucky Categorical Exclusion Determinations: Kentucky Location Categorical Exclusion Determinations issued for actions in Kentucky. DOCUMENTS AVAILABLE FOR DOWNLOAD March 4, 2016 CX-100532 Categorical Exclusion Determination 5m/W Solar/Photovoltaic Array on Abandoned Landfill #5 Award Number: DE-EE0006623 CX(s) Applied: B5.16 Solar Energy Technologies Office Date: 07/11/2014 Location(s): KY Office(s): Golden Field Office March 4, 2016 CX-100532 Categorical Exclusion Determination 5m/W

  7. Categorical Exclusion Determinations: Maine | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Maine Categorical Exclusion Determinations: Maine Location Categorical Exclusion Determinations issued for actions in Maine. DOCUMENTS AVAILABLE FOR DOWNLOAD August 26, 2016 CX-100702 Categorical Exclusion Determination High-performance Bi-Directional Inverter for Solar Plus Storage Award Number: DE-EE0007593 CX(s) Applied: A9, B3.6 Solar Energy Technologies Office Date: 8/15/2016 Location(s): ME Office(s): Golden Field Office July 24, 2015 CX-014069: Categorical Exclusion Determination

  8. Innovative Technologies for Bioenergy Technologies Incubator...

    Energy.gov [DOE] (indexed site)

    00PM EDT Online The Innovative Technologies for Bioenergy Technologies Incubator 2 FOA Informational Webinar will be held Wednesday, September 2, 1:00 p.m.-2:00 p.m. ET. Standard...

  9. Plasma technology directory

    SciTech Connect

    Ward, P.P.; Dybwad, G.L.

    1995-03-01

    The Plasma Technology Directory has two main goals: (1) promote, coordinate, and share plasma technology experience and equipment within the Department of Energy; and (2) facilitate technology transfer to the commercial sector where appropriate. Personnel are averaged first by Laboratory and next by technology area. The technology areas are accelerators, cleaning and etching deposition, diagnostics, and modeling.

  10. Clean coal technologies: Research, development, and demonstration program plan

    SciTech Connect

    Not Available

    1993-12-01

    The US Department of Energy, Office of Fossil Energy, has structured an integrated program for research, development, and demonstration of clean coal technologies that will enable the nation to use its plentiful domestic coal resources while meeting environmental quality requirements. The program provides the basis for making coal a low-cost, environmentally sound energy choice for electric power generation and fuels production. These programs are briefly described.

  11. Waste Determination Equivalency - 12172

    SciTech Connect

    Freeman, Rebecca D.

    2012-07-01

    Secretary of Energy in January of 2006 based on proposed processing techniques with the expectation that it could be revised as new processing capabilities became viable. Once signed, however, it became evident that any changes would require lengthy review and another determination signed by the Secretary of Energy. With the maturation of additional salt removal technologies and the extension of the SWPF start-up date, it becomes necessary to define 'equivalency' to the processes laid out in the original determination. For the purposes of SRS, any waste not processed through Interim Salt Processing must be processed through SWPF or an equivalent process, and therefore a clear statement of the requirements for a process to be equivalent to SWPF becomes necessary. (authors)

  12. Ultrasonics: Fundamentals, Technologies, and Applications

    SciTech Connect

    Ensminger, Dale; Bond, Leonard J.

    2011-09-17

    This is a new edition of a bestselling industry reference. Discusses the science, technology, and applications of low and high power ultrasonics, including industrial implementations and medical uses. Reviews the basic equations of acoustics, starting from basic wave equations and their applications. New material on property determination, inspection of metals (NDT) and non-metals, imaging, process monitoring and control. Expanded discussion of transducers, transducer wave-fields, scattering, attenuation and measurement systems and models. New material that discusses high power ultrasonics - in particular using mechanical effects and sonochemistry, including applications to nano-materials. Examines diagnosis, therapy, and surgery from a technology and medical physics perspective.

  13. Forest products technologies

    SciTech Connect

    None, None

    2006-07-18

    Report highlights DOE Industrial Technology Program co-funded R&D resulting in commercial energy-efficient technologies and emerging technologies helping the forest products industry save energy.

  14. Genius Sand: A Miniature Kill Vehicle Technology to Support Boost Phase Intercepts and Midcourse Engagements

    SciTech Connect

    Ledebuhr, A.G.; Ng, L.C.; Kordas, J.F.; Jones, M.S.; McMahon, D.H.

    2002-06-30

    This paper summarizes Lawrence Livermore National Laboratory's (LLNL) approach to a proposed Technology Demonstration program for the development of a new class of miniature kill vehicles (MKVs), that they have termed Genius Sand (GS). These miniaturized kinetic kill vehicles offer new capabilities for boost phase intercept (BPI) missions, as well as midcourse intercepts and the defeat of advanced countermeasures. The specific GS MKV properties will depend on the choice of mission application and system architecture, as well as the level of coordinated or autonomous operations in these missions. In general the GS MKVs will mass from between 1 to 5 kilograms and have several hundred meters per second of {Delta}v and be capable of several g's of acceleration. Based on the results of their previous study effort, they believe that it is feasible to develop and integrate the required technologies into a fully functional GS MKV prototype within the scope of a three-year development effort. They will discuss some of the system architecture trades and applicable technologies that can be applied in an operational MKV system, as a guide to focus any technology demonstration program. They will present the results of a preliminary 6DOF analysis to determine the minimum capabilities of an MKV system. They also will discuss a preliminary design configuration of a 2 kg GS MKV that has between 300-500 m/s of {Delta}v and has at least 2-g's of acceleration capability. They believe a successful GS MKV development effort will require not only a comprehensive component miniaturization program, but a rapid hardware prototyping process, and the ability to utilize high fidelity ground testing methodologies.

  15. Jefferson Lab - Technology Transfer

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Welcome to Technology Transfer What is Technology Transfer at Jefferson Lab? Technology transfer and technology partnering are significant mechanisms for DOE laboratories and facilities to engage non-Federal entities to advance technology development and commercialization. Fundamental and applied research at the DOE laboratories have been conduits for technology transfer, collaborating with university and industry colleagues to develop and commercialize products and processes for commercial use.

  16. NETL: SOFC Core Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Core Technology Core Technology-This key technology conducts applied research and development on technologies - exclusive of the cell components - that improve the cost, performance, robustness, reliability, and endurance of SOFC stack or balance-of-plant (BOP) technology. Projects in the Core Technology portfolio focus on interconnects and seals, identify and mitigate stack-related degradation, develop computational tools and models, and conduct laboratory- and bench-scale testing to improve

  17. Technology assessment of external heat systems for Stirling heat pumps. Final report

    SciTech Connect

    Vasilakis, A.D.

    1993-12-01

    A technology assessment and design improvement effort was undertaken for the Stirling engine heat pump external heat system (EHS) in order to reduce costs. It was found that only two applicable EHS design approaches have been developed to any extent: a relatively undeveloped design featuring a premixed fuel and air transpiration burner, and a turbulent diffusion type burner system developed by Mechanical Technology, Inc. To evaluate and optimize the design concepts, an analytical model was developed that examined design and performance variables. The model calculated key temperatures, allowing the specification of materials requirements. Adherence to American National Standards Institute appliance furnace code material specifications was assumed. Concepts for EHS control systems were evaluated, and a cost-effective control system design was developed for the turbulent diffusion burner EHS. The study reveals that optimizing the diffusion burner EHS design can result in significant cost savings. No clear choice between the diffusion burner and transpiration burner systems could be determined from this study, but the designs of both were further developed and improved. Estimates show the EHS based on a transpiration burner to have a manufactured cost that is roughly 70% of the turbulent diffusion burner EHS cost, but fuel efficiency is lower by about 18%.

  18. Popular Choice Winners Announced for "Apps for Energy" Competition |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Popular Choice Winners Announced for "Apps for Energy" Competition Popular Choice Winners Announced for "Apps for Energy" Competition June 6, 2012 - 1:53pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - The Energy Department announced today the Popular Choice winners for the "Apps for Energy" competition, with app developers submitting more than 50 innovative mobile and web applications that will help utility consumers save money by

  19. Morgantown Energy Technology Center, technology summary

    SciTech Connect

    Not Available

    1994-06-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. METC`s R&D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities.

  20. Green Purchasing & Green Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Purchasing & Technology Goals 6 & 7: Green Purchasing & Green Technology Our goal is to purchase and use environmentally sustainable products whenever possible and to implement...

  1. CBI Technology Impact Framework

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CBI Technology Impact Framework 2014 Building Technologies Office Peer Review Images courtesy CREE, True Manufacturing, A.O. Smith, Bernstein Associates, Cambridge Engineering, ...

  2. Promising Technologies List

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    about promising new and underutilized energy-saving technologies available for Federal and commercial building sector deployment. To identify promising technologies,...

  3. NREL: Technology Transfer - Contacts

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    you may have about NREL's technology transfer opportunities. Partnering with NREL Anne Miller, 303-384-7353 Licensing NREL Technologies Eric Payne, 303-275-3166 Printable Version...

  4. Technology Selection Process

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    technologies, including Technical Advisory Groups and the Energy Efficiency Technology Roadmap. Technical Advisory Groups E3T engages stakeholders of electric power industries in...

  5. Hydropower Program Technology Overview

    SciTech Connect

    Not Available

    2001-10-01

    New fact sheets for the DOE Office of Power Technologies (OPT) that provide technology overviews, description of DOE programs, and market potential for each OPT program area.

  6. Science & Technology - 2016

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    technology 2016 july Science & Technology - 2016 July 3D Printing Could Revolutionize ... Talk about being responsive to the needs of your customers. The NIF & Photon Science team ...

  7. Vehicle Technologies Office: News

    Energy.gov [DOE]

    EERE intends to issue, on behalf of its Fuel Cell Technologies Office, a Funding Opportunity Announcement (FOA) entitled "Fuel Cell Technologies Incubator: Innovations in Fuel Cell and Hydrogen...

  8. Fuel Cell Technologies Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fuel Cell Technologies Overview Flow Cell Workshop Washington, DC Dr. Sunita Satyapal & Dr. Dimitrios Papageorgopoulos U.S. Department of Energy Fuel Cell Technologies Program 37...

  9. Fuel Cell Technologies Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fuel Cell Seminar Orlando, FL Dr. Sunita Satyapal U.S. Department of Energy Fuel Cell Technologies Program Program Manager 1112011 2 | Fuel Cell Technologies Program Source: US ...

  10. Fuel Cell Technologies Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fuel Cell Technologies Overview States Energy Advisory Board (STEAB) Washington, DC Dr. Sunita Satyapal U.S. Department of Energy Fuel Cell Technologies Program Program Manager 3...

  11. Digital Sensor Technology

    SciTech Connect

    Thomas, Ken D.; Quinn, Edward L.; Mauck, Jerry L.; Bockhorst, Richard M.

    2015-02-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy and reliability. This paper, which refers to a final report issued in 2013, demonstrates these benefits in direct comparisons of digital and analog sensor applications. Improved accuracy results from the superior operating characteristics of digital sensors. These include improvements in sensor accuracy and drift and other related parameters which reduce total loop uncertainty and thereby increase safety and operating margins. An example instrument loop uncertainty calculation for a pressure sensor application is presented to illustrate these improvements. This is a side-by-side comparison of the instrument loop uncertainty for both an analog and a digital sensor in the same pressure measurement application. Similarly, improved sensor reliability is illustrated with a sample calculation for determining the probability of failure on demand, an industry standard reliability measure. This looks at equivalent analog and digital temperature sensors to draw the comparison. The results confirm substantial reliability improvement with the digital sensor, due in large part to ability to continuously monitor the health of a digital sensor such that problems can be immediately identified and corrected. This greatly reduces the likelihood of a latent failure condition of the sensor at the time of a design basis event. Notwithstanding the benefits of digital sensors, there are certain qualification issues that are inherent with digital technology and these are described in the report. One major qualification impediment for digital sensor implementation is software common cause failure (SCCF).

  12. Engineer End Uses for Maximum Efficiency; Industrial Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    0 * August 2004 Industrial Technologies Program Suggested Actions * Review compressed air end uses and determine the required level of air pressure. * Review the compressed air end ...

  13. Cost Effectiveness of Technology Solutions for Future Vehicle Systems

    Energy.gov [DOE]

    Explores the economics of CO2 emission reductions by added engine technology to determine if there is an overall positive or negative benefit.

  14. JV between Paratransit Inc and Hybrid Technologies Inc | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    California Zip: 95822 Sector: Vehicles Product: JV to determine the utility of lithium powered vehicles produced by Hybrid Technologies for taxicabs and vehicles that are...

  15. Sun Materials Technology aka Shanyang Technology | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Technology aka Shanyang Technology Jump to: navigation, search Name: Sun Materials Technology (aka Shanyang Technology) Place: Yilan County, Taiwan Product: A US-Taiwan JV company...

  16. GT Solar Technologies formerly GT Equipment Technologies | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Technologies formerly GT Equipment Technologies Jump to: navigation, search Name: GT Solar Technologies (formerly GT Equipment Technologies) Place: Merrimack, New Hampshire...

  17. Quantum Fuel Systems Technologies Worldwide Inc Quantum Technologies...

    OpenEI (Open Energy Information) [EERE & EIA]

    Fuel Systems Technologies Worldwide Inc Quantum Technologies Jump to: navigation, search Name: Quantum Fuel Systems Technologies Worldwide Inc (Quantum Technologies) Place: Irvine,...

  18. Blue Spark Technologies formerly Thin Battery Technologies Inc...

    OpenEI (Open Energy Information) [EERE & EIA]

    Spark Technologies formerly Thin Battery Technologies Inc Jump to: navigation, search Name: Blue Spark Technologies (formerly Thin Battery Technologies Inc.) Place: Westlake, Ohio...

  19. DOE Vehicle Technologies Program 2009 Merit Review Report - Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technology Integration and Education DOE Vehicle Technologies Program 2009 Merit Review Report - Technology Integration and Education Merit review of DOE Vehicle Technologies ...

  20. 2010 DOE EERE Vehicle Technologies Program Merit Review … Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technology Integration 2010 DOE EERE Vehicle Technologies Program Merit Review Technology Integration Technology integration merit review results PDF icon 2010amr08.pdf ...

  1. Solar Technology Center

    SciTech Connect

    Boehm, Bob

    2011-04-27

    The Department of Energy, Golden Field Office, awarded a grant to the UNLV Research Foundation (UNLVRF) on August 1, 2005 to develop a solar and renewable energy information center. The Solar Technology Center (STC) is to be developed in two phases, with Phase I consisting of all activities necessary to determine feasibility of the project, including design and engineering, identification of land access issues and permitting necessary to determine project viability without permanently disturbing the project site, and completion of a National Environmental Policy Act (NEPA) Environmental Assessment. Phase II is the installation of infrastructure and related structures, which leads to commencement of operations of the STC. The STC is located in the Boulder City designated 3,000-acre Eldorado Valley Energy Zone, approximately 15 miles southwest of downtown Boulder City and fronting on Eldorado Valley Drive. The 33-acre vacant parcel has been leased to the Nevada Test Site Development Corporation (NTSDC) by Boulder City to accommodate a planned facility that will be synergistic with present and planned energy projects in the Zone. The parcel will be developed by the UNLVRF. The NTSDC is the economic development arm of the UNLVRF. UNLVRF will be the entity responsible for overseeing the lease and the development project to assure compliance with the lease stipulations established by Boulder City. The STC will be operated and maintained by University of Nevada, Las Vegas (UNLV) and its Center for Energy Research (UNLV-CER). Land parcels in the Eldorado Valley Energy Zone near the 33-acre lease are committed to the construction and operation of an electrical grid connected solar energy production facility. Other projects supporting renewable and solar technologies have been developed within the energy zone, with several more developments in the horizon.

  2. NREL: Technology Transfer - Commercialization Programs

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    303-275-3051. Printable Version Technology Transfer Home About Technology Transfer Technology Partnership Agreements Licensing Agreements Nondisclosure Agreements...

  3. Fact #764: January 28, 2013 Model Year 2013 Brings More Fuel Efficient Choices for Consumers

    Energy.gov [DOE]

    Over the last six years, manufacturers have made more fuel efficient choices available to consumers in several size classes. For a consumer purchasing a new large car in 2008, the highest combined...

  4. R.E.A.C.T. - Renewable Energy Activities - Choices for Tomorrow...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    R.E.A.C.T. Renewable Energy Activities - Choices for Tomorrow Teacher's Activity Guide for Middle Level Grades 6-8 National Renewable Energy Laboratory Education Programs 1617 Cole ...

  5. Marine Fuel Choice for Ocean- Going Vessels within Emissions Control Areas

    Energy Information Administration (EIA) (indexed site)

    Marine Fuel Choice for Ocean- Going Vessels within Emissions Control Areas June 2015 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | Marine fuel choice for ocean going vessels within emissions control areas i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are

  6. A Proposed Methodology to Determine the Leverage Impacts of Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... of the program's fiscal year 2006 budget" * Our program's ... Schexnayder, February, 2002. 7 See Weatherization ... leverage) the more justification for claims of ...

  7. Hydrogen delivery technology roadmap

    SciTech Connect

    None, None

    2005-11-15

    Document describing plan for research into and development of hydrogen delivery technology for transportation applications.

  8. Innovative Process Technologies

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Innovative Process Technologies Research Team Members Key Contacts Innovative Process Technologies Innovative Process Technologies is concerned with the development of innovative costeffective technologies that promote efficiency, environmental performance, availability of advanced energy systems, and the development of computational tools that shorten development timelines of advanced energy systems. NETL, working with members of the NETL-Regional University Alliance (NETL-RUA), will focus on

  9. Soil washing technology evaluation

    SciTech Connect

    Suer, A.

    1995-04-01

    Environmental Restoration Engineering (ERE) continues to review innovative, efficient, and cost effective technologies for SRS soil and/or groundwater remediation. As part of this effort, this technical evaluation provides review and the latest information on the technology for SRS soil remediation. Additional technology evaluation reports will be issued periodically to update these reports. The purpose of this report is to review the soil washing technology and its potential application to SRS soil remediation. To assess whether the Soil Washing technology is a viable option for SRS soil remediation, it is necessary to review the technology/process, technology advantages/limitations, performance, applications, and cost analysis.

  10. The US Department of Energy`s facility reuse at the Rocky Flats Environmental Technology Site

    SciTech Connect

    1998-08-01

    This audit was initiated to determine whether the Rocky Flats Environmental Technology Site was maximizing its reuse of excess facilities.

  11. Harsh-environment, Low-cost Sensor Technology for Engine and...

    Energy.gov [DOE] (indexed site)

    More Documents & Publications CX-010928: Categorical Exclusion Determination Harsh Environment Silicon Carbide Sensor Technology for Geothermal Instrumentation Improved Engine ...

  12. NATIONAL ENERGY TECHNOLOGY LABORATORY Technology Transfer

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The unique technology allows operators to optimize the processing to improve material yield, decrease energy use, and improve safety systems. Specialty metals, such as titanium or ...

  13. Thermally Activated Technologies Technology Roadmap, May 2003...

    Energy.gov [DOE] (indexed site)

    technologies for converting America's wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. ...

  14. NATIONAL ENERGY TECHNOLOGY LABORATORY Technology Transfer Novel...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Novel PlatinumChromium Alloy for the Manufacture of Improved Coronary Stents Success Story NETL Technology Transfer Group techtransfer@netl.doe.gov Contact Partners A coronary...

  15. National Energy Technology Laboratory Technologies Available...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Analysis Energy Storage Geothermal Hydrogen and Fuel Cell Hydropower, Wave and Tidal Industrial Technologies Solar Photovoltaic Solar Thermal Startup America Vehicles and Fuels ...

  16. Oil industry investment and research as portfolio choices

    SciTech Connect

    Helfat, C.E.

    1985-01-01

    The Tobin-Markowitz portfolio selection model is used to test two hypotheses: (1) the oil price increase of 1973-74 altered the structure of oil industry risks and returns in favor of certain types of research and investment; (2) the altered structure of risks and their correlations affected the allocation of funds to capital investment and research and development in the oil industry. To test these hypotheses, the efficient frontiers of investment and R and D projects for a representative firm in the oil industry are derived empirically, pre-embargo and post-embargo. In deriving the efficient frontiers, the Tobin-Markowitz model is altered to account for an asset whose supply to the industry if fixed and whose price is determined endogenously from the portfolio selection model itself. This asset is an offshore oil tract. The government fixes the supply of offshore oil tracts to the industry, for which the firms submit sealed bids. Because the returns to investment in offshore oil covary with the returns to other types of industry investment and R and D, firms determine the price to bid for a tract in conjunction with the allocation of funds to all of the firm's projects. Both the actual expenditure shares by the industry and those predicted by the model showed an increased share of the portfolio devoted to offshore oil investment and a decreased share to other projects after the embargo.

  17. Conceptual design of an integrated technology model for carbon policy assessment.

    SciTech Connect

    Backus, George A.; Dimotakes, Paul E.

    2011-01-01

    This report describes the conceptual design of a technology choice model for understanding strategies to reduce carbon intensity in the electricity sector. The report considers the major modeling issues affecting technology policy assessment and defines an implementable model construct. Further, the report delineates the basis causal structure of such a model and attempts to establish the technical/algorithmic viability of pursuing model development along with the associated analyses.

  18. TECHNOLOGY TRANSFER COORDINATORS

    Office of Energy Efficiency and Renewable Energy (EERE)

    Mark Hartney, Director of the Office of Strategic Planning, SLAC, discussed technology transfer at SLAC. Bob Hwang, Director, Transportation Energy Center, Combustion Research Facility, SNL presented on technology transfer at SNL. Elsie Quaite-Randall, Chief Technology Transfer Officer, Innovation and Partnerships Office, LBNL, presented on technology transfer at LBNL. Richard A. Rankin, Director, Industrial Partnerships Office and Economic Development Office (Interim), LLNL, presented on technology transfer at LLNL.

  19. Materials Science and Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    PADSTE » ADEPS » MST Materials Science and Technology Providing world-leading, innovative, and agile materials science and technology solutions for national security missions. MST is metallurgy. The Materials Science and Technology Division provides scientific and technical leadership in materials science and technology for Los Alamos National Laboratory. READ MORE MST is engineered materials. The Materials Science and Technology Division provides scientific and technical leadership in

  20. NATIONAL ENERGY TECHNOLOGY LABORATORY Technology Transfer NETL Technology for Safer,

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technology for Safer, Cleaner Corrosion-Protecting Metal Coatings Licensed by Pittsburgh Start-Up Success Story Corrosion-related issues cost the U.S. economy $276 billion a year. The Energy Department's National Energy Technology Laboratory (NETL) teamed up with Carnegie Mellon University (CMU) to create a revolutionary, cost-effective technology to reduce that impact-work that resulted in the creation of a new CMU/NETL spin-off that signed a licensing agreement with the laboratory in June. The

  1. PTC, ITC, or Cash Grant? An Analysis of the Choice Facing Renewable Power Projects in the United States

    SciTech Connect

    Bolinger, Mark; Wiser, Ryan; Cory, Karlynn; James, Ted

    2009-03-11

    ) could have a significant impact on how renewable power projects are financed over the next few years. The purpose of this report is to both quantitatively and qualitatively analyze, from the project developer/owner perspective, the choice between the PTC and the ITC (or equivalent cash grant) for a number of different renewable power technologies.1 Because the two credits are structured differently, and apply in different ways to different technologies, the choice between the two lends itself to quantitative financial analysis of the conditions under which either the PTC or the ITC would, at least in theory, provide greater financial value. Qualitative considerations may be equally important, however, particularly in instances where quantitative differences are modest. This report proceeds as follows. Section 2 provides a brief summary of ARRA 2009, with some emphasis on those provisions designed to ease the liquidity crisis facing the renewable power sector. Section 3 describes the quantitative analysis methodology, as well as modeling results for wind, open-loop biomass, closed-loop biomass, geothermal, and landfill gas projects. Section 4 discusses a number of qualitative considerations that may play as important of a role as quantitative results in deciding between the PTC and the ITC (or equivalent cash grant). Section 5 concludes, and an Appendix provides supplemental tables that present quantitative analysis results conducted at different discount rates.

  2. Categorical Exclusion Determinations: Arizona | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Arizona Categorical Exclusion Determinations: Arizona Location Categorical Exclusion Determinations issued for actions in Arizona. DOCUMENTS AVAILABLE FOR DOWNLOAD September 9, 2016 CX-100742 Categorical Exclusion Determination A Novel Platform for Algal Biomass Production Using Cellulosic Mixotrophy Award Number: DE-EE0007562 CX(s) Applied: A9, B3.6, B5.15 Bioenergy Technologies Office Date: 8/29/2016 Location(s): AZ Office(s): Golden Field Office August 26, 2016 CX-100700 Categorical Exclusion

  3. Categorical Exclusion Determinations: Arkansas | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Arkansas Categorical Exclusion Determinations: Arkansas Location Categorical Exclusion Determinations issued for actions in Arkansas. DOCUMENTS AVAILABLE FOR DOWNLOAD September 7, 2016 CX-100719 Categorical Exclusion Determination High-Performance Self-Cleaning, Antireflective, and Anti-fog Coating for PV Glass to Increase Module Output and Decrease BOS Costs Award Number: DE-EE0007582 CX(s) Applied: A9, B3.6 Solar Energy Technologies Office Date: 8/22/2016 Location(s): AR Office(s): Golden

  4. Categorical Exclusion Determinations: Florida | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Florida Categorical Exclusion Determinations: Florida Location Categorical Exclusion Determinations issued for actions in Florida. DOCUMENTS AVAILABLE FOR DOWNLOAD September 9, 2016 CX-100749 Categorical Exclusion Determination Improving Data Center Energy Efficiency through End-to-End Cooling Modeling and Optimization Award Number: DE-EE0007688 CX(s) Applied: A9, B5.1 Building Technologies Office Date: 8/11/2016 Location(s): FL Office(s): Golden Field Office September 7, 2016 CX-100721

  5. Categorical Exclusion Determinations: Illinois | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Illinois Categorical Exclusion Determinations: Illinois Location Categorical Exclusion Determinations issued for actions in Illinois. DOCUMENTS AVAILABLE FOR DOWNLOAD July 20, 2016 CX-100656 Categorical Exclusion Determination Improving reliability and reducing cost in CdTe photovoltaics via grain boundary engineering Award Number: DE-EE0007545 CX(s) Applied: A9, B3.6 Solar Energy Technologies Office Date: 7/12/2016 Location(s): IL Office(s): Golden Field Office April 6, 2016 CX-100589

  6. Categorical Exclusion Determinations: Indiana | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Indiana Categorical Exclusion Determinations: Indiana Location Categorical Exclusion Determinations issued for actions in Indiana. DOCUMENTS AVAILABLE FOR DOWNLOAD March 7, 2016 CX-100543 Categorical Exclusion Determination Renewable Acid-hydrolysis Condensation Hydrotreating (REACH) Pilot Plant Award Number: DE-EE0006244 CX(s) Applied: A9, B3.6 Bioenergy Technology Office Date: 07/31/2014 Location(s): IN Office(s): Golden Field Office January 12, 2016 CX-100450 Categorical Exclusion

  7. Categorical Exclusion Determinations: Iowa | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Iowa Categorical Exclusion Determinations: Iowa Location Categorical Exclusion Determinations issued for actions in Iowa. DOCUMENTS AVAILABLE FOR DOWNLOAD August 22, 2016 CX-100698 Categorical Exclusion Determination Novel Infiltration Diagnostics based on Laser-line Scanning and Infrared Temperature Field Imaging Award Number: DE-EE0007686 CX(s) Applied: A9, B3.6 Buildings Technology Office Date: 8/15/2016 Location(s): IA Office(s): Golden Field Office March 4, 2016 CX-100528 Categorical

  8. Categorical Exclusion Determinations: Maryland | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Maryland Categorical Exclusion Determinations: Maryland Location Categorical Exclusion Determinations issued for actions in Maryland. DOCUMENTS AVAILABLE FOR DOWNLOAD September 9, 2016 CX-100748 Categorical Exclusion Determination Advanced Serpentine Heat Exchangers to Minimize the Number of Joints and Leakage in HVAC&R Systems Award Number: DE-EE0007680 CX(s) Applied: A9, B3.6 Building Technologies Office Date: 8/11/2016 Location(s): MD Office(s): Golden Field Office June 12, 2016 CX-100642

  9. Categorical Exclusion Determinations: Massachusetts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Massachusetts Categorical Exclusion Determinations: Massachusetts Location Categorical Exclusion Determinations issued for actions in Massachusetts. DOCUMENTS AVAILABLE FOR DOWNLOAD September 8, 2016 CX-100732 Categorical Exclusion Determination Achieving Ubiquitous Solar Through Market Transformation and Grid Integration Award Number: DE-EE0007589 CX(s) Applied: A9, A11, B3.6 Solar Energy Technologies Office Date: 8/18/2016 Location(s): MA Office(s): Golden Field Office July 20, 2016 CX-100664

  10. Categorical Exclusion Determinations: Michigan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Michigan Categorical Exclusion Determinations: Michigan Location Categorical Exclusion Determinations issued for actions in Michigan. DOCUMENTS AVAILABLE FOR DOWNLOAD October 6, 2016 CX-100761 Categorical Exclusion Determination Durable High-Power Membrane Electrode Assemblies with Low-Pt-Loading Award Number: DE-EE0007651 CX(s) Applied: A9, B3.6 Fuel Cell Technologies Office Date: 10/4/2016 Location(s): MI Office(s): Golden Field Office September 16, 2016 CX-100753 Categorical Exclusion

  11. Categorical Exclusion Determinations: Missouri | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Missouri Categorical Exclusion Determinations: Missouri Location Categorical Exclusion Determinations issued for actions in Missouri. DOCUMENTS AVAILABLE FOR DOWNLOAD August 26, 2016 CX-100704 Categorical Exclusion Determination Fundamental Studies of Surface-Functionalized Mesoporous Carbons for Thermodynamic Stabilizationand Reversibility of Metal Hydrides Award Number: DE-EE0007656 CX(s) Applied: A9, B3.6, B3.15 Fuel Cell Technologies Office Date: 8/15/2016 Location(s): MO Office(s): Golden

  12. Categorical Exclusion Determinations: Nationwide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Nationwide Categorical Exclusion Determinations: Nationwide Location Categorical Exclusion Determinations issued for actions nationwide. DOCUMENTS AVAILABLE FOR DOWNLOAD November 7, 2016 CX-100766 Categorical Exclusion Determination Notice of Final Rule Rulemaking for Energy Conservation Standards for Commercial Packaged Boilers RIN 1904-AD07 CX(s) Applied: B5.1 EERE-Buildings Technology Program Date: 11/7/2016 Location(s): Nationwide Office(s): Golden Field Office October 27, 2016 CX-100764

  13. Categorical Exclusion Determinations: Nevada | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Nevada Categorical Exclusion Determinations: Nevada Location Categorical Exclusion Determinations issued for actions in Nevada. DOCUMENTS AVAILABLE FOR DOWNLOAD September 9, 2016 CX-100744 Categorical Exclusion Determination A novel approach to map permeability using passive seismic emission tomography Award Number: DE-EE0007698 CX(s) Applied: A9, B3.1 Geothermal Technologies Office Date: 8/29/2016 Location(s): OH Office(s): Golden Field Office April 4, 2016 CX-100588 Categorical Exclusion

  14. Categorical Exclusion Determinations: Pennsylvania | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Pennsylvania Categorical Exclusion Determinations: Pennsylvania Location Categorical Exclusion Determinations issued for actions in Pennsylvania. DOCUMENTS AVAILABLE FOR DOWNLOAD September 9, 2016 CX-100747 Categorical Exclusion Determination Developing a Novel Hydrogen Sponge with Ideal Binding Energy and Hugh Surface Area for Practical Hydrogen Storage Award Number: DE-EE0007655 CX(s) Applied: A9, B3.6 Fuel Cell Technologies Office Date: 8/11/2016 Location(s): PA Office(s): Golden Field Office

  15. Categorical Exclusion Determinations: Southeastern Power Administration |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Southeastern Power Administration Categorical Exclusion Determinations: Southeastern Power Administration Categorical Exclusion Determinations issued by Southeastern Power Administration. DOCUMENTS AVAILABLE FOR DOWNLOAD August 17, 2016 CX-100674 Categorical Exclusion Determination Monolithic silicon module manufacturing at less than 0.40 $/W Award Number: DE-EE0007538 CX(s) Applied: A9, B3.6 Solar Energy Technology Office Date: 7/25/2016 Location(s): AZ Office(s):

  16. Categorical Exclusion Determinations: Texas | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Texas Categorical Exclusion Determinations: Texas Location Categorical Exclusion Determinations issued for actions in Texas. DOCUMENTS AVAILABLE FOR DOWNLOAD September 7, 2016 CX-100722 Categorical Exclusion Determination Development of a novel, near real time approach to geothermal seismic exploration and Monitoring Via Ambient Seismic Noise Interferometry Award Number: DE-EE0007699 CX(s) Applied: A9, B3.1 Geothermal Technologies Office Date: 8/29/2016 Location(s): TX Office(s): Golden Field

  17. Categorical Exclusion Determinations: Utah | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Utah Categorical Exclusion Determinations: Utah Location Categorical Exclusion Determinations issued for actions in Utah. DOCUMENTS AVAILABLE FOR DOWNLOAD September 8, 2016 CX-100734 Categorical Exclusion Determination Multi-Scale Ordered Cell Structure for Cost Effective Production of Hydrogen by HTWS Award Number: DE-EE0007645 CX(s) Applied: A9, B3.6 Fuel Cell Technologies Office Date: 8/19/2016 Location(s): UT Office(s): Golden Field Office August 11, 2016 CX-100680 Categorical Exclusion

  18. Categorical Exclusion Determinations: Vermont | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vermont Categorical Exclusion Determinations: Vermont Location Categorical Exclusion Determinations issued for actions in Vermont. DOCUMENTS AVAILABLE FOR DOWNLOAD January 27, 2016 CX-100465 Categorical Exclusion Determination Training for State Officials to Make Solar More Inclusive, Affordable, and Consumer Friendly Award Number: DE-EE0007321 CX(s) Applied: A9, A11 Solar Energy Technologies Office Date: 01/27/2016 Location(s): VT Office(s): Golden Field Office October 2, 2015 CX-100384

  19. Categorical Exclusion Determinations: Virginia | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Virginia Categorical Exclusion Determinations: Virginia Location Categorical Exclusion Determinations issued for actions in Virginia. DOCUMENTS AVAILABLE FOR DOWNLOAD September 7, 2016 CX-100725 Categorical Exclusion Determination Optimization of concentrator photovoltaic solar cell performance through photonic engineering Award Number: DE-EE0007544 CX(s) Applied: A9, B3.6 Solar Energy Technologies Office Date: 8/31/2016 Location(s): VA Office(s): Golden Field Office September 7, 2016 CX-100724

  20. Enhanced Geothermal Systems (EGS) Well Construction Technology Evaluation Report

    SciTech Connect

    Polsky, Yarom; Capuano, Louis; Finger, John; Huh, Michael; Knudsen, Steve; Chip, A.J. Mansure; Raymond, David; Swanson, Robert

    2008-12-01

    This report provides an assessment of well construction technology for EGS with two primary objectives: 1. Determining the ability of existing technologies to develop EGS wells. 2. Identifying critical well construction research lines and development technologies that are likely to enhance prospects for EGS viability and improve overall economics.

  1. Validation of Innovative Exploration Technologies at the Colado, Nevada,

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Geothermal Prospect | Department of Energy at the Colado, Nevada, Geothermal Prospect Validation of Innovative Exploration Technologies at the Colado, Nevada, Geothermal Prospect DOE Geothermal Technologies Peer Review 2010 - Presentation. validation_combs_colado_prospect.pdf (326.99 KB) More Documents & Publications CX-002359: Categorical Exclusion Determination 2010 Geothermal Technology Program Peer Review Report 2015 GTO Peer Review | Poster Session

  2. SHARED TECHNOLOGY TRANSFER PROGRAM

    SciTech Connect

    GRIFFIN, JOHN M. HAUT, RICHARD C.

    2008-03-07

    The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderock unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.

  3. Marine and Hydrokinetic Technology Glossary

    Office of Energy Efficiency and Renewable Energy (EERE)

    Learn about the basic technologies and key terms used to describe marine and hydrokinetic technologies.

  4. CX-100759 Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    9 Categorical Exclusion Determination CX-100759 Categorical Exclusion Determination Accelerating Market Adoption of Best-in-class Building Technologies, the Technology Demonstration Initiative (TDI) Award Number: DE-EE0007065 CX(s) Applied: A9, A11 Buildings Technologies Office Date: 9/20/2016 Location(s): CA Office(s): Golden Field Office The U.S. Department of Energy (DOE) is proposing to provide funding to the Upper Coastal Plain Council of Government (UCPCOG) to facilitate a mapping system

  5. CX-007410: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    10: Categorical Exclusion Determination CX-007410: Categorical Exclusion Determination Deep Geothermal Drilling using Millimeter Wave Technology CX(s) Applied: A9, B3.6 Date: 11/30/2011 Location(s): Massachusetts Offices(s): Golden Field Office Impact Technologies LLC (Impact) would utilize DOE and cost share funds to further develop the intense millimeter wave (MMW) radiation technology for ablation/vaporization and melting of rocks in drilling to deep geothermal formations. Phase I of this

  6. CX-100295 Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    5 Categorical Exclusion Determination CX-100295 Categorical Exclusion Determination Accelerating Market Adoption of Best-in-Class Building Technologies, the Technology Demonstration Initiative (TDI) Award Number: DE-EE0007065 CX(s) Applied: A9 Building Technologies Office Date: 06/17/2015 Location(s): CA Office(s): Golden Field Office The U.S. Department of Energy (DOE) is proposing to provide federal funding to Los Angeles Cleantech Incubator (LACI) to identify, evaluate and initiate

  7. Model choice considerations and information integration using analytical hierarchy process

    SciTech Connect

    Langenbrunner, James R; Hemez, Francois M; Booker, Jane M; Ross, Timothy J.

    2010-10-15

    Using the theory of information-gap for decision-making under severe uncertainty, it has been shown that model output compared to experimental data contains irrevocable trade-offs between fidelity-to-data, robustness-to-uncertainty and confidence-in-prediction. We illustrate a strategy for information integration by gathering and aggregating all available data, knowledge, theory, experience, similar applications. Such integration of information becomes important when the physics is difficult to model, when observational data are sparse or difficult to measure, or both. To aggregate the available information, we take an inference perspective. Models are not rejected, nor wasted, but can be integrated into a final result. We show an example of information integration using Saaty's Analytic Hierarchy Process (AHP), integrating theory, simulation output and experimental data. We used expert elicitation to determine weights for two models and two experimental data sets, by forming pair-wise comparisons between model output and experimental data. In this way we transform epistemic and/or statistical strength from one field of study into another branch of physical application. The price to pay for utilizing all available knowledge is that inferences drawn for the integrated information must be accounted for and the costs can be considerable. Focusing on inferences and inference uncertainty (IU) is one way to understand complex information.

  8. The International Safeguards Technology Base: How is the Patient Doing? An Exploration of Effective Metrics

    SciTech Connect

    Schanfein, Mark J; Gouveia, Fernando S

    2010-07-01

    The term “Technology Base” is commonly used but what does it mean? Is there a common understanding of the components that comprise a technology base? Does a formal process exist to assess the health of a given technology base? These are important questions the relevance of which is even more pressing given the USDOE/NNSA initiatives to strengthen the safeguards technology base through investments in research & development and human capital development. Accordingly, the authors will establish a high-level framework to define and understand what comprises a technology base. Potential goal-driven metrics to assess the health of a technology base will also be explored, such as linear demographics and resource availability, in the hope that they can be used to better understand and improve the health of the U.S. safeguards technology base. Finally, through the identification of such metrics, the authors will offer suggestions and highlight choices for addressing potential shortfalls.

  9. High Efficiency Engine Technologies Program

    SciTech Connect

    Rich Kruiswyk

    2010-07-13

    Caterpillar's Product Development and Global Technology Division carried out a research program on waste heat recovery with support from DOE (Department of Energy) and the DOE National Energy Technology Laboratory. The objective of the program was to develop a new air management and exhaust energy recovery system that would demonstrate a minimum 10% improvement in thermal efficiency over a base heavy-duty on-highway diesel truck engine. The base engine for this program was a 2007 C15 15.2L series-turbocharged on-highway truck engine with a LPL (low-pressure loop) exhaust recirculation system. The focus of the program was on the development of high efficiency turbomachinery and a high efficiency turbocompound waste heat recovery system. The focus of each area of development was as follows: (1) For turbine stages, the focus was on investigation and development of technologies that would improve on-engine exhaust energy utilization compared to the conventional radial turbines in widespread use today. (2) For compressor stages, the focus was on investigating compressor wheel design parameters beyond the range typically utilized in production, to determine the potential efficiency benefits thereof. (3) For turbocompound, the focus was on the development of a robust bearing system that would provide higher bearing efficiencies compared to systems used in turbocompound power turbines in production. None of the turbocharger technologies investigated involved addition of moving parts, actuators, or exotic materials, thereby increasing the likelihood of a favorable cost-value tradeoff for each technology. And the turbocompound system requires less hardware addition than competing bottoming cycle technologies, making it a more attractive solution from a cost and packaging standpoint. Main outcomes of the program are as follows: (1) Two turbine technologies that demonstrated up to 6% improvement in turbine efficiency on gas stand and 1-3% improvement in thermal efficiency in

  10. FY04 Engineering Technology Reports Technology Base

    SciTech Connect

    Sharpe, R M

    2005-01-27

    Lawrence Livermore National Laboratory's Engineering Directorate has two primary discretionary avenues for its investment in technologies: the Laboratory Directed Research and Development (LDRD) program and the ''Tech Base'' program. This volume summarizes progress on the projects funded for technology-base efforts in FY2004. The Engineering Technical Reports exemplify Engineering's more than 50-year history of researching and developing (LDRD), and reducing to practice (technology-base) the engineering technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence, and has prepared for this role with a skilled workforce and technical resources. This accomplishment is well summarized by Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow''. LDRD is the vehicle for creating those technologies and competencies that are cutting edge. These require a significant level of research or contain some unknown that needs to be fully understood. Tech Base is used to apply those technologies, or adapt them to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice''. Tech Base projects effect the natural transition to reduction-to-practice of scientific or engineering methods that are well understood and established. They represent discipline-oriented, core competency activities that are multi-programmatic in application, nature, and scope. The objectives of technology-base funding include: (1) the development and enhancement of tools and processes to provide Engineering support capability, such as code maintenance and improved fabrication methods; (2) support of Engineering science and technology infrastructure, such as the installation or integration of a new capability; (3) support for technical and administrative leadership through our technology Centers; and (4) the initial scoping and

  11. Vehicle Technologies Program Implementation

    SciTech Connect

    none,

    2009-06-19

    The Vehicle Technologies Program takes a systematic approach to Program implementation. Elements of this approach include the evaluation of new technologies, competitive selection of projects and partners, review of Program and project improvement, project tracking, and portfolio management and adjustment.

  12. Photovoltaics: A Diverse Technology

    Office of Energy Efficiency and Renewable Energy (EERE)

    This video illustrates the diversity of photovoltaic (PV) technology, which is due to innovations in PV materials, reductions in manufacturing costs, and expanding uses of the technology. A brief...

  13. SSL TECHNOLOGY DEVELOPMENT WORKSHOP

    Energy.gov [DOE]

    Rapid advances in SSL technology make it easy to forget that this technology is still at a relatively early stage of development, and much of its potential remains untapped. The 10th annual DOE SSL...

  14. SSL Technology Development Workshop

    Energy.gov [DOE]

    Rapid advances make it easy to forget that SSL technology is still at a relatively early stage of development, and much of its potential remains untapped. The 10th annual DOE SSL Technology...

  15. Technology Readiness Assessment Guide

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2011-09-15

    The Guide assists individuals and teams involved in conducting Technology Readiness Assessments (TRAs) and developing Technology Maturation Plans (TMPs) for the DOE capital asset projects subject to DOE O 413.3B. Supersedes DOE G 413.3-4.

  16. Technology Deployment Case Studies

    Energy.gov [DOE]

    Find technology deployment case studies below. Click on each individual project link to see the full case study. You can also view a map of technology deployment case studies.

  17. Technology Transfer Ombudsman Program

    Energy.gov [DOE]

    The Technology Transfer Commercialization Act of 2000, Public Law 106-404 (PDF) was enacted in November 2000.  Pursuant to Section 11, Technology Partnerships Ombudsman, each DOE national...

  18. Tag: technology transfer

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    17all en CNS, UT chemical sensing technology wins R&D 100 Award http:www.y12.doe.govnewspress-releasescns-ut-chemical-sensing-technology-wins-rd-100-award

  19. ADVANCED RECIPROCATING COMPRESSION TECHNOLOGY (ARCT)

    SciTech Connect

    Danny M. Deffenbaugh; Klaus Brun; Ralph E. Harris; J. Pete Harrell; Robert J. Mckee; J. Jeffrey Moore; Steven J. Svedeman; Anthony J. Smalley; Eugene L. Broerman; Robert A Hart; Marybeth G. Nored; Ryan S. Gernentz; Shane P. Siebenaler

    2005-12-01

    The U.S. natural gas pipeline industry is facing the twin challenges of increased flexibility and capacity expansion. To meet these challenges, the industry requires improved choices in gas compression to address new construction and enhancement of the currently installed infrastructure. The current fleet of installed reciprocating compression is primarily slow-speed integral machines. Most new reciprocating compression is and will be large, high-speed separable units. The major challenges with the fleet of slow-speed integral machines are: limited flexibility and a large range in performance. In an attempt to increase flexibility, many operators are choosing to single-act cylinders, which are causing reduced reliability and integrity. While the best performing units in the fleet exhibit thermal efficiencies between 90% and 92%, the low performers are running down to 50% with the mean at about 80%. The major cause for this large disparity is due to installation losses in the pulsation control system. In the better performers, the losses are about evenly split between installation losses and valve losses. The major challenges for high-speed machines are: cylinder nozzle pulsations, mechanical vibrations due to cylinder stretch, short valve life, and low thermal performance. To shift nozzle pulsation to higher orders, nozzles are shortened, and to dampen the amplitudes, orifices are added. The shortened nozzles result in mechanical coupling with the cylinder, thereby, causing increased vibration due to the cylinder stretch mode. Valve life is even shorter than for slow speeds and can be on the order of a few months. The thermal efficiency is 10% to 15% lower than slow-speed equipment with the best performance in the 75% to 80% range. The goal of this advanced reciprocating compression program is to develop the technology for both high speed and low speed compression that will expand unit flexibility, increase thermal efficiency, and increase reliability and integrity

  20. Market Acceptance of Advanced Automotive Technologies (MA3T) Model

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Acceptance of Advanced Automotive Technologies (MA3T) Model (Oak Ridge National Laboratory) Objectives Forecasts sales of competing vehicle technologies among consumer segments. Analyzes how technology, infrastructure, consumer behavior, and policy affect sales of new technologies and determines the resulting societal, environmental and economic impacts. Key Attributes & Strengths MA3T can be used to investigate the societal benefits, costs, and employment impacts of market transitions

  1. Microturbine Power Conversion Technology Review, April 2003 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Microturbine Power Conversion Technology Review, April 2003 Microturbine Power Conversion Technology Review, April 2003 Oak Ridge National Laboratory (ORNL) performed a technology review to assess the market for commercially available power electronic converters that can be used to connect microturbines to either the electric grid or local loads. The intent of the review is to facilitate an assessment of the present status of marketed power conversion technology to determine how

  2. Benchmarking of Competitive Technologies

    Energy.gov [DOE]

    2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

  3. Information Technology | Jefferson Lab

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Information Technology The Information Technology Division uses cutting-edge technology to provide high-quality services and capabilities that enable the lab to pursue its research mission in support of the nation's scientific agenda. Leading the division is the chief information officer. The CIO is responsible for providing information from the labs information technology systems to Jefferson Lab management, the overall IT vision, the information architecture for computing and IT, and oversight

  4. TECHNOLOGY READINESS ASSESSMENT

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    DECEMBER 2012 Pathway for readying the next generation of affordable clean energy technology -Carbon Capture, Utilization, and Storage (CCUS) 2012 TECHNOLOGY READINESS ASSESSMENT -OVERVIEW 2 2012 TECHNOLOGY READINESS ASSESSMENT-OVERVIEW 2012 TECHNOLOGY READINESS ASSESSMENT-OVERVIEW 3 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any

  5. Robert Jilek: Pellion Technologies

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Robert Jilek: Pellion Technologies Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Robert Jilek: Pellion Technologies Senior research scientist at eastern energy storage startup September 3, 2014 Robert Jilek Robert Jilek Contact Linda Anderman Email Robert Jilek Jilek is currently with Pellion Technologies Bob Jilek is currently spending part of his time in a management role at Pellion Technologies in the Cambridge

  6. Technology Integration Overview

    Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  7. Technology Transfer | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technology Transfer Through partnerships and licensing of its intellectual property rights, NREL seeks to reduce private sector risk in early stage technologies, enable investment in the adoption of renewable energy and energy efficiency technologies, reduce U.S. reliance on foreign energy sources, reduce carbon emissions, and increase U.S. industrial competitiveness. Text Version View a summary of our Fiscal Year 2015 technology partnership agreements. Learn more about our partnership

  8. Consumer Vehicle Technology Data

    Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  9. Advanced Propulsion Technology Strategy

    Energy.gov [DOE]

    GM is also developing new classes of electrically driven vehicles, leveraging technology first used in their hybrids.

  10. Membrane Technology Workshop

    Energy.gov [DOE]

    Presentation by Charles Page (Air Products & Chemicals, Inc.) for the Membrane Technology Workshop held July 24, 2012

  11. Benchmarking of Competitive Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Laboratory * National Renewable Energy Laboratory * ORNL Team Members - Steve Campbell, Chester Coomer - Andy Wereszczak, Materials Science and Technology Division Partners ...

  12. Geothermal Energy & Drilling Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy & Drilling Technology - Sandia Energy Energy Search Icon Sandia Home Locations ... Atmospheric Radiation Measurement Climate Reasearch Facility Geomechanics and Drilling ...

  13. Building Technologies Program Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Renewable Energy Building Technologies Program Jerry Dion Acting Program Manager Building Technologies Program State Energy Advisory Board Meeting October 17, 2007 The investment in Buildings R&D yielded an ROI of 15:1 from 1978 to 2000 The Buildings Technologies Program researches and Energy Efficiency & deploys new technologies to make homes and Renewable Energy commercial buildings more affordable, energy efficient, and better performing The investment in Buildings R&D yielded an

  14. Technology Performance Exchange

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Meeting * Open invitation for peer review 12 | Building Technologies Office ... data flows with Building Component Library * Seamless information flow from ...

  15. Geothermal Technologies Program Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Jay Nathwani Acting Program Manager Geothermal Technologies Program Office of Energy Efficiency and Renewable Energy The Geothermal Technologies Program Overview May 18 2010 Energy Efficiency & Renewable Energy eere.energy.gov Geothermal Technologies Program (GTP) Program Topic Areas *Low Temperature, Geopressured and Coproduced Resources *Innovative Exploration Technologies National Goals *Economy Putting people to work in the near- term, and in the future *Security Developing and expanding

  16. Carbon Fiber Technology Facility

    Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  17. Biogas Production Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Production Technologies Ruihong Zhang, Professor Biological and Agricultural Engineering University of California, Davis Email: rhzhang@ucdavis.edu Biogas and Fuel Cell Workshop National Renewable Energy Laboratory June 12, 2012 Presentation Outline * Status of anaerobic digestion technologies and opportunities for further development * New UC Davis solid waste digestion technologies applied to commercial projects Anaerobic Digestion Biogas Digester Effluent (residual solids and water) Organic

  18. Technology Performance Exchange

    SciTech Connect

    2015-09-01

    To address the need for accessible, high-quality data, the Department of Energy has developed the Technology Performance Exchange (TPEx). TPEx enables technology suppliers, third-party testing laboratories, and other entities to share product performance data. These data are automatically transformed into a format that technology evaluators can easily use in their energy modeling assessments to inform procurement decisions.

  19. Compression Technology and Needs

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    M ohawk Innovative Technology, Inc. HYDROGEN TRANSMISSION AND DISTRIBUTION WORKSHOP NATIONAL RENEWABLE ENERGY LABORATORY GOLDEN, COLORADO COMPRESSION TECHNOLOGY AND NEEDS Hooshang Heshmat, PH.D. February 25 TH , 2014 ® M ohawk Innovative Technology, Inc. * Overall pipeline delivery steps, production to file up * Different types of compressors * Pipeline compressor development steps and accomplishments * Need for Forecourt Compression system * Other major components: drive, sealing, pipeline,

  20. High Impact Technology Hub

    Energy.gov [DOE]

    The High Impact Technology Hub is a one stop shop for information associated with technology demonstrations in occupied, operational buildings. Resources posted to Hub should accelerate the selection and evaluation of technology demonstration projects and enable transparency into DOEs market stimulation and tech to market activities.

  1. Vehicle Technologies Office

    Energy.gov [DOE]

    The Vehicle Technologies Office is developing more energy efficient and environmentally friendly highway transportation technologies that will enable America to use less petroleum. The long-term aim is to develop "leap frog" technologies that will provide Americans with greater freedom of mobility and energy security, while lowering costs and reducing impacts on the environment.

  2. Vehicle Technologies Office: 2008 Advanced Vehicle Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric Vehicles Vehicle Technologies Office: 2010 Vehicle and Systems Simulation and Testing R&D Annual Progress Report

  3. Recent advances in lithium ion technology

    SciTech Connect

    Levy, S.C.

    1995-01-01

    Lithium ion technology is based on the use of lithium intercalating electrodes. Carbon is the most commonly used anode material, while the cathode materials of choice have been layered lithium metal chalcogenides (LiMX{sub 2}) and lithium spinel-type compounds. Electrolytes may be either organic liquids or polymers. Although the first practical use of graphite intercalation compounds as battery anodes was reported in 1981 for molten salt cells (1) and in 1983 for ambient temperature systems (2) it was not until Sony Energytech announced a new lithium ion rechargeable cell containing a lithium ion intercalating carbon anode in 1990, that interest peaked. The reason for this heightened interest is that these cells have the high energy density, high voltage and fight weight of metallic lithium systems plus a very long cycle life, but without the disadvantages of dendrite formation on charge and the safety considerations associated with metallic lithium.

  4. 2013 DOE Bioenergy Technologies Office (BETO) Project

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2013 DOE Bioenergy Technologies Office (BETO) Project Peer Review Second Generation Biofuels: Carbon Sequestration and Life Cycle Analysis Date: May 21, 2013, 11:20 AM Technology Area Review: Feedstock Supply & Logistics Principal Investigator: Adam J. Liska Co-PIs: T. Arkebauer and K. Cassman Organization: University of Nebraska, Lincoln, NE This presentation does not contain any proprietary, confidential, or otherwise restricted information Project Goals * Determine the impact of corn

  5. APPLYING SIMPLE TECHNOLOGY ACCOMPLISHES VISUAL INSPECTION CHALLENGES

    SciTech Connect

    Robinson, C

    2007-07-21

    This paper discusses the successful implementation of simple video technologies at the Savannah River Site (SRS) to perform complex visual inspection, monitoring, and surveillance tasks. Because SRS facilities are similar to those of an industrial plant, the environmental and accessibility considerations for remote viewing are the primary determining factors in the selection of technology. The constraints and challenges associated with remote viewing are discussed, and examples of applications are given.

  6. Demonstrating and implementing innovative technologies: Case studies from the USDOE Office of Technology Development

    SciTech Connect

    Brouns, T.M.; Koegler, K.J.; Mamiya, L.S.

    1995-02-01

    This paper describes elements of success for demonstration, evaluation, and transfer for deployment of innovative technologies for environmental restoration. They have been compiled from lessons learned through the US Department of Energy (DOE) Office of Technology Development`s Volatile Organic Compounds in Arid Soil Integrated Demonstration (VOC-Arid ID). The success of the VOC-Arid ID program was determined by the rapid development demonstration, and transfer for deployment of technologies to operational sites that improve on safety, cost, and/or schedule of performance over baseline technologies. The VOC-Arid ID successfully fielded more than 25 innovative technology field demonstrations; several of the technologies demonstrated have been successfully transferred for deployment Field demonstration is a critical element in the successful transfer of innovative technologies into environmental restoration operations. The measures of success for technology demonstrations include conducting the demonstration in a safe and controlled environment and generating the appropriate information by which to evaluate the technology. However, field demonstrations alone do not guarantee successful transfer for deployment There are many key elements throughout the development and demonstration process that have a significant impact on the success of a technology. This paper presents key elements for a successful technology demonstration and transfer for deployment identified through the experiences of the VOC-Arid ID. Also, several case studies are provided as examples.

  7. Materials technology assessment for a 1050 K Stirling Space Engine design

    SciTech Connect

    Scheuermann, C.M.; Dreshfield, R.L.; Gaydosh, D.J.; Kiser, J.D.; MacKay, R.A.; McDanels, D.L.; Petrasek, D.W.; Vannucci, R.D.; Bowles, K.J.; Watson, G.K.

    1988-10-01

    An assessment of materials technology and proposed materials selection was made for the 1050 K (superalloy) Stirling Space Engine design. The objectives of this assessment were to evaluate previously proposed materials selections, evaluate the current state-of-the-art materials, propose potential alternate materials selections and identify research and development efforts needed to provide materials that can meet the stringent system requirements. This assessment generally reaffirmed the choices made by the contractor; however, in many cases alternative choices were described and suggestions for needed materials and fabrication research and development were made.

  8. California Institute of Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Cafeterias Cafeterias I.L. Creations, Inc. is the concessions contractor for both the Forrestal and Germantown cafeterias. Their menus offer over 125 items that include healthy choice selections, cold salad dishes, and an extensive offering of American and International buffet dishes. Forrestal Cafeteria The Forrestal cafeteria hours of operation are Monday through Friday from 6:45 a.m. until 3:00 p.m. Standard breakfast and lunch foods are made at specialty stations, with hot and cold

  9. Vehicle Technologies Office Merit Review 2014: Carbon Fiber Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Carbon Fiber Technology Facility Vehicle Technologies Office Merit Review 2014: Carbon Fiber Technology Facility Presentation given by Oak Ridge National Laboratory at 2014 DOE ...

  10. Fuel Cell Technologies Office: Technology Validation Fact Sheet

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Fuel Cell Technologies (FCT) Office, through its Technology Validation program, provides a crucial step in the transition of a technology from the lab to commercialization. ...

  11. Technology Readiness Assessment (TRA)/Technology Maturation Plan...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Readiness Assessment (TRA)Technology Maturation Plan (TMP) Process Guide Technology Readiness ... More Documents & Publications Technology Readiness Assessment Report Small Column Ion ...

  12. Vehicle Technologies Office Merit Review 2015: Vehicle Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Technologies Office Overview Vehicle Technologies Office Merit Review 2015: Vehicle Technologies Office Overview Presentation given by U.S. Department of Energy at 2015 DOE ...

  13. Vehicle Technologies Office Merit Review 2015: Advanced Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Advanced Technology Vehicle Lab Benchmarking (L1&L2) Vehicle Technologies Office Merit Review 2015: Advanced Technology Vehicle Lab Benchmarking (L1&L2) Presentation given by Argonne ...

  14. Vehicle Technologies Office: 2008 Oak Ridge Transportation Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Oak Ridge Transportation Technology Program Annual Report Vehicle Technologies Office: 2008 Oak Ridge Transportation Technology Program Annual Report ornlttpreportfy08.pdf (4.58 ...

  15. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    SciTech Connect

    M.A. Ebadian

    1999-06-30

    To enhance the measurement capability of EICs to alpha spectrometry, measurements at FIU-HCET were performed on different energy alpha sources, and response factors of ST electrets in 960-mL chamber were determined. Earlier, EIC was considered as only a charge-integrating device without spectrometric capability. This is a potentially significant development accomplished by FIU-HCET. It could appreciably lower the current cost of spectral characterization. FIU-HCET has been invited to participate in the Operating Engineers' National Hazmat program's assessment of the Mini Mitter, commercially known as the VitalSense{trademark} Telemetric Monitoring System. This evaluation is scheduled for early July 1999. Additional health and safety technology evaluations, in which FIU-HCET will also participate, are also scheduled for later in the summer. The Technology Information System (TIS), MISD, and DASD are now complete and accessible through the Internet website http://www.DandD.org/tis.

  16. Gerar Technology | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Gerar Technology Jump to: navigation, search Name: Gerar Technology Place: Rio de Janeiro, Brazil Product: Developer of new technology for production of biodiesel from vegetable...

  17. EKB Technology | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    EKB Technology Jump to: navigation, search Name: EKB Technology Place: Oxfordshire, United Kingdom Product: Developer of a new bioprocessing technology. Coordinates: 51.813938,...

  18. Rubicon Technology | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Rubicon Technology Jump to: navigation, search Name: Rubicon Technology Place: Franklin Park, Illinois Zip: 60131 Product: Rubicon Technology makes a sapphire substrates for use in...

  19. High Impact Technology Hub- Results

    Energy.gov [DOE]

    Highlights, outcomes and activities to support the adoption of High Impact Technologies. Technology Highlights preview early results from current technology demonstrations. Case Studies overview...

  20. Shorepower Technologies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Shorepower Technologies Jump to: navigation, search Logo: Shorepower Technologies Name: Shorepower Technologies Address: 2351 NW York St. Place: Portland, Oregon Zip: 97210 Region:...

  1. PCN Technology | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    PCN Technology Jump to: navigation, search Name: PCN Technology Place: San Diego, California Zip: CA 92127 Product: California-based smart grid technology developer. References:...

  2. Briza Technologies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Briza Technologies Jump to: navigation, search Name: Briza Technologies Place: Hillsborough, New Jersey Zip: 8844 Sector: Wind energy Product: Developing wind turbine technology....

  3. Konarka Technologies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Technologies Jump to: navigation, search Name: Konarka Technologies Place: Lowell, MA Website: www.konarkatechnologies.com References: Konarka Technologies1 Information About...

  4. Minerals Technologies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Technologies Jump to: navigation, search Name: Minerals Technologies Place: Bethlehem, PA Website: www.mineralstechnologies.com References: Minerals Technologies1 Information...

  5. Topanga Technologies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Technologies Place: Canoga Park, California Zip: 91303 Product: Stealth-mode high-intensity discharge (HID) lighting technology developer. References: Topanga Technologies1...

  6. Combining ESP and baghouse technology

    SciTech Connect

    Rowland, B.; Ganatra, C.P.; Woolston, J.

    1994-12-31

    The authors present a progressive application in the field of air pollution control technology. The content of this paper should appeal to operators who must operate out-of-compliance electrostatic precipitators (ESPs), or to those who strive for optimal emission control. St. Lawrence Cement Company, a plant in Beauport Canada, has been in operation since 1955. Their two wet process kilns have utilized electrostatic precipitator (ESP) filters since inception. Since 1965, this company has strived to reduce energy consumption by using alternative waste fuel. This, combined with the increased demand of low alkali cement, took its toll on the ESPs, causing the equipment and its performance to deteriorate. Pressure from environmental agencies to lower outlet emissions forced the company to consider ESP modifications. After investigating several alternatives, the optimal modification was to combine the ESP with bag filters. In addition to being the best choice from a performance standpoint, it was also the least expensive. This modification also allowed a reduced alkali dust from the ESP hoppers to be recirculated to the kilns. The latter two-thirds of the ESP were converted to a baghouse, and optimal system performance was achieved by using high efficiency expanded polytetrafluoroethylene (ePTFE) membrane filter bags. Despite the high moisture, submicron particle size, and cohesive nature of the alkaline dust, very low pressure differentials and extremely low emissions were achieved. Most notably, this complex project was completed within nine months, from concept to commissioning. The plant was shut down for only six weeks during the entire retrofit process. This economically attractive idea was readily accepted by St. Lawrence Cement personnel and the permitting agencies. After the first successful kiln/ESP retrofit, the second kiln/ESP conversion was completed the following year.

  7. Economic comparison of clean coal generating technologies with natural gas-combined cycle systems

    SciTech Connect

    Sebesta, J.J.; Hoskins, W.W. )

    1990-01-01

    This paper reports that there are four combustion technologies upon which U.S. electric utilities are expected to rely for the majority of their future power generating needs. These technologies are pulverized coal- fired combustion (PC); coal-fired fluidized bed combustion (AFBC); coal gasification, combined cycle systems (CGCC); and natural gas-fired combined cycle systems (NGCC). The engineering and economic parameters which affect the choice of a technology include capital costs, operating and maintenance costs, fuel costs, construction schedule, process risk, environmental and site impacts, fuel efficiency and flexibility, plant availability, capacity factors, timing of startup, and the importance of utility economic and financial factors.

  8. Technology transfer 1994

    SciTech Connect

    Not Available

    1994-01-01

    This document, Technology Transfer 94, is intended to communicate that there are many opportunities available to US industry and academic institutions to work with DOE and its laboratories and facilities in the vital activity of improving technology transfer to meet national needs. It has seven major sections: Introduction, Technology Transfer Activities, Access to Laboratories and Facilities, Laboratories and Facilities, DOE Office, Technologies, and an Index. Technology Transfer Activities highlights DOE`s recent developments in technology transfer and describes plans for the future. Access to Laboratories and Facilities describes the many avenues for cooperative interaction between DOE laboratories or facilities and industry, academia, and other government agencies. Laboratories and Facilities profiles the DOE laboratories and facilities involved in technology transfer and presents information on their missions, programs, expertise, facilities, and equipment, along with data on whom to contact for additional information on technology transfer. DOE Offices summarizes the major research and development programs within DOE. It also contains information on how to access DOE scientific and technical information. Technologies provides descriptions of some of the new technologies developed at DOE laboratories and facilities.

  9. Exploration Technologies Technology Needs Assessment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies Technology Needs Assessment Exploration Technologies Technology Needs Assessment The Exploration Technologies Needs Assessment is a critical component of ongoing technology roadmapping efforts, and will be used to guide the program's research and development. iet_needs_assessment_06-2011.pdf (5.04 MB) More Documents & Publications Draft Innovative Exploration Technologies Needs Assessment Geothermal Technologies Program Annual Peer Review Presentation By Doug Hollett

  10. Human choice and climate change. Volume 4: What have we learned

    SciTech Connect

    Rayner, S.; Malone, E.L.

    1997-12-31

    Foreward: Preface; Why study human choice and climate change; The challenge of climate change to the social sciences; Social science insights into climate change; Ten suggestions for policymakers; Key data on human activity and climate change; and Sponsoring organizations, International Advisory Board, and project participants.

  11. Science & Technology Review December 2007

    SciTech Connect

    Chinn, D J

    2007-10-24

    This month's issue has the following articles: (1) Homeland Security Begins Abroad--Commentary by John C. Doesburg; (2) Out of Harm's Way--New physical protection and accountability systems, together with a focus on security, safeguard nuclear materials in the Russian Federation; (3) A Calculated Journey to the Center of the Earth--Determining the permeability of partially melted metals in a mineral matrix unlocks secrets about the formation of Earth's core; (4) Wireless That Works--Communication technologies using ultrawideband radar are improving national security; and (5) Power to the People--Edward Teller envisioned safe and plentiful nuclear power for peaceful applications.

  12. Environmental Technology Verification of Mobile Sources Control...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Environmental Technology Verification of Mobile Sources Control Technologies Environmental Technology Verification of Mobile Sources Control Technologies 2005 Diesel Engine...

  13. Vehicle Technologies Office: Laboratory Facilities and Collaborative...

    Energy Saver

    Electric Drive Technologies Vehicle Technologies Office: Laboratory Facilities and Collaborative Research for Electric Drive Technologies The Vehicle Technologies Office (VTO) ...

  14. Geothermal Technologies Office - Webmaster | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    - Webmaster Geothermal Technologies Office - Webmaster

  15. CX-100604 Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4 Categorical Exclusion Determination CX-100604 Categorical Exclusion Determination Final Determination of Coverage for Miscellaneous Refrigeration Products RIN 1904-AC66 CX(s) Applied: A6 EERE-Buildings Technology Program Date: 05/04/2016 Location(s): Nationwide Office(s): Golden Field Office Under this Final Determination DOE is determining that miscellaneous refrigeration products (MREFs), which include coolers (wine chillers and similar products) and combination cooler refrigeration products

  16. Geothermal innovative technologies catalog

    SciTech Connect

    Kenkeremath, D.

    1988-09-01

    The technology items in this report were selected on the basis of technological readiness and applicability to current technology transfer thrusts. The items include technologies that are considered to be within 2 to 3 years of being transferred. While the catalog does not profess to be entirely complete, it does represent an initial attempt at archiving innovative geothermal technologies with ample room for additions as they occur. The catalog itself is divided into five major functional areas: Exploration; Drilling, Well Completion, and Reservoir Production; Materials and Brine Chemistry; Direct Use; and Economics. Within these major divisions are sub-categories identifying specific types of technological advances: Hardware; Software; Data Base; Process/Procedure; Test Facility; and Handbook.

  17. Completed Deepwater Technology Projects

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Deepwater Technology Projects Active Projects | Completed Projects Completed Offshore Deepwater Technology Projects Project Number Project Name Primary Performer 12121-6503-01 Development of Best Practices and Risk Mitigation Measures for Deepwater Cementing in SBM and OBM CSI Technologies 11121-5101-01 Trident: A Human Factors Decision Aid Integrating Deepwater Drilling Tasks, Incidents, and Literature Review Pacific Science & Engineering Group 11121-5503-01 Intelligent BOP RAM Actuation

  18. TECHNOLOGY READINESS ASSESSMENT

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ASSESSMENT JANUARY 2015 -A CHECKPOINT ALONG A CHALLENGING JOURNEY DOE/NETL-2015/1710 U.S. Department of Energy 2014 TECHNOLOGY READINESS ASSESSMENT-CLEAN COAL RESEARCH PROGRAM 2 2014 TECHNOLOGY READINESS ASSESSMENT-CLEAN COAL RESEARCH PROGRAM Office of Fossil Energy | National Energy Technology Laboratory DISCLAIMER 3 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor

  19. 2013 DOE Bioenergy Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bioenergy Technologies Office (BETO) Project Peer Review Catalytic Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels (2 3 1 12) Technology Area Review: Biochemical Conversion 1 | Bioenergy Technologies Office eere.energy.gov Hydrocarbon Fuels (2.3.1.12) May 22, 2013 Mike Lilga This presentation does not contain any proprietary, confidential, or otherwise restricted information Conversion Organization: PNNL Goal Statement Goals: * There is a need to make a balanced f el composition

  20. Technologies | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technologies Available for Licensing Energy Storage Industrial & Manufacturing Processes Instrumentation & Devices Licensable Software Life Sciences Materials Transportation Fact Sheets and Forms Licensable Technologies Argonne's researchers have developed a wide and diverse range of technologies that have worldwide impact in a variety of fields. Argonne grants licenses for lab-developed intellectual property to existing and start-up companies that are technically and financially capable

  1. Digital Sensor Technology

    SciTech Connect

    Ted Quinn; Jerry Mauck; Richard Bockhorst; Ken Thomas

    2013-07-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy, reliability, availability, and maintainability. This report demonstrates these benefits in direct comparisons of digital and analog sensor applications. It also addresses the qualification issues that must be addressed in the application of digital sensor technology.

  2. Bioenergy Technologies Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies State Energy Advisory Board Meeting October 18, 2007 ORNL Jonathan R, Mielenz ORNL Biomass Program Manager & Bioconversion Science and Technology President's State of the Union Address January 2006 Keeping America competitive requires affordable energy. And here we have a serious problem: America is addicted to oil, which is often imported from unstable parts of the world. The best way to break this addiction is through technology.... and we are on the threshold of incredible

  3. Technology Transfer Execution Plan

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Transfer Execution Plan 2016 - 2018 Report to Congress October 2016 United States Department of Energy Washington, DC 20585 Department of Energy | October 2016 Technology Transfer Execution Plan 2016-2018 | Page ii Message from the Secretary On behalf of the U.S. Department of Energy (DOE), I am pleased to present the Department's Technology Transfer Execution Plan (TTEP). This plan is intended to guide DOE, particularly it's Office of Technology Transitions (OTT), in promoting scientific and

  4. Technology Transfer - JCAP

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    PAZ0004_v2.jpg Technology Transfer Who We Are JCAP Mission JCAP At A Glance Fact Sheets Organizational Chart Recent Science Technology Transfer Awards & Honors Senior Management Scientific Leadership Researchers Governance & Advisory Boards Operations & Administration Who we are Overview JCAP Mission JCAP At A Glance Fact Sheets Organizational Chart Our Achievements Recent Science Technology Transfer Awards & Honors Our People Senior Management Scientific Leadership Researchers

  5. Technology Transfer Partnership Ombuds

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tech Transfer Ombuds Technology Transfer Partnership Ombuds The mission of the Ombuds Office is to enhance communication and mitigate conflict at the Laboratory. Contact (505) 665-2837 Email Anonymous Helpline (505) 667-9370 Technology transfer dispute resolution The Ombuds Program offers dispute resolution assistance to the Laboratory's external stakeholders in areas of technology transfer and other community-based affairs that is consistent with Ombuds Standards of practice. Scope To serve as

  6. Jefferson Lab - Technology Transfer

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technology Review Committee The Technology Review Committee was established by Jefferson Lab's Director's Council to oversee the intellectual property of the Laboratory. The Committee, composed of representatives of all Divisions, is charged with facilitating the transfer of technology and inventions, developed at the Laboratory, to the private sector. This activity takes on a variety of forms, from establishing Memoranda of Understanding (MOUs), Cooperative Research and Development Agreements

  7. Technology Pathway Selection Effort

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    BIOMASS PROGRAM Technology Pathway Selection Effort Alicia Lindauer 27 November 2012 2 | Biomass Program eere.energy.gov * Setting R&D priorities * Benchmarking * Informing multi-sectoral analytical activities * Track Program R&D progress against goals * Identify technology process routes and prioritize funding * Program direction decisions: * Are we spending our money on the right technology pathways? * Within a pathway: Are we focusing our funding on the highest priority activities?

  8. Geothermal Technologies Office March

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report Geothermal Technologies Office March 2015 The 2014 Annual Report of the Geothermal Technologies Office is a product of the United States Department of Energy, Office of Energy Efficiency and Renewable Energy. DOE/EERE-1160 * March 2015 This report spans calendar year 2014 achievements. Photographs are accredited herein. back cover photo: Geothermal heat at Pilgrim Hot Springs, Alaska. Source: C. Pike at the Alaska Center for Energy and Power 2014 Annual Report Geothermal Technologies

  9. Marine & Hydrokinetic Technologies

    SciTech Connect

    2011-07-01

    This fact sheet describes the Wind and Water Power Program's current approach to supporting the development and deployment of marine and hydrokinetic technologies.

  10. Benchmarking of Competitive Technologies

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  11. Fuel Cell Technologies Budget

    SciTech Connect

    EERE

    2012-03-16

    The Fuel Cell Technologies Office receives appropriations from Energy and Water Development. The offices's major activities and budget are outlined in this Web page.

  12. Overview of biomass technologies

    SciTech Connect

    None, None

    2009-01-18

    The biomass overview of the Renewable Energy Technology Characterizations describes the technical and economic status of this emerging renewable energy option for electricity supply.

  13. Information Sciences and Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    file systems Bioinformatics Infectious disease surveillance Climate change and energy security Smart grids Learn more about our Information Science and Technology capabilities

  14. Supervisory Information Technology Specialist

    Energy.gov [DOE]

    A successful candidate in this position will be responsible for providing Information Technology (IT) infrastructure, capabilities and technical support to the Department of Energy (DOE),...

  15. Emerging Technologies (ET)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Appliance and Equipment Standards * ENERGY STAR Theory of Impact: Deployment programs utilize reports as technology baseline. Theory of Impact: Supports performance and cost ...

  16. Technology Demonstration Partnership Policy

    Energy.gov [DOE]

    This City Council memorandum establishes a framework for engaging in and evaluating demonstration partnerships with the goal of developing, testing, and demonstrating emerging technologies, product, and service innovations.

  17. Information Technology Specialist (Security)

    Energy.gov [DOE]

    A successful candidate in this position will serve as an Information Technology Specialist (Security) responsible for providing technical support in the information security environment which...

  18. 2016 Technology Innovation Projects

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Projects FY 2016 Technology Innovation Project Briefs Demand Response TIP 292: Advanced Heat Pump Water Heater Research TIP 336: Scaled Deployment and Demonstration of Demand...

  19. Scaled Wind Farm Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Scaled Wind Farm Technology - Sandia Energy Energy Search Icon Sandia Home Locations ... Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power ...

  20. Consumer Vehicle Technology Data

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    technologies Relevance: An informed understanding of the consumer allows VTO to achieve petroleum-use reduction goals through: * Robust assumptions for consumer modeling,...

  1. Consumer Vehicle Technology Data

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    technologies. Relevance: An informed understanding of the consumer allows VTO to achieve petroleum-use reduction goals through: * Robust assumptions for consumer modeling,...

  2. TECHNOLOGY PROGRAM PLAN

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... against business environment risk, reducing program dependency on a single developer. ... U.S. DEPARTMENT OF ENERGY TECHNOLOGY PROGRAM PLAN CHAPTER 2: SOLID OXIDE FUEL CELLS ...

  3. ocean energy technologies

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Tribal Energy Program Intellectual Property Current EC Partnerships How to Partner Small ... SunShot Grand Challenge: Regional Test Centers ocean energy technologies HomeTag:ocean ...

  4. Benchmarking of Competitive Technologies

    Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  5. ENERGY EFFICIENCY TECHNOLOGY ROADMAP

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    managed the overall development and maturation of this Energy Efficiency Technology Roadmap, the effort would not have been possible without the active engagement of a diverse...

  6. Collaborative Transmission Technology Roadmap

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Addendum to the Collaborative Transmission Technology Roadmap March 2014 Bonneville Power Administration Enhanced PDF Functionality Functionality of the PDF version of this...

  7. Sandia Science & Technology Park

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laboratories. More Info Liquid Common SS&TP welcomes Liquid Common Liquid Common is a digital marketing company now located in the Park. More Info Sandia Science & Technology...

  8. Technology Integration Overview

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  9. Renewable energy technology characterizations

    SciTech Connect

    None, None

    1997-12-01

    The Renewable Energy Technology Characterizations describe the technical and economic status of the major emerging renewable energy options for electricity supply.

  10. Information Science & Technology Institute

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ISTI Information Science & Technology Institute Providing connection to program management for capability needs, as well as IS&T integration and support for mission-critical...

  11. Advanced Optical Technologies

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The Advanced Optical Components and Technologies program develops, creates and provides critical optical components for laser-based missions at LLNL. Past projects focused on ...

  12. Quadrennial Technology Review Glossary

    Office of Environmental Management (EM)

    ... converter A technology based on semiconductor devices ... in hot rock to allow the extraction of heat to drive power generation. enhanced oil recovery Techniques that use water, ...

  13. Window Industry Technology Roadmap

    SciTech Connect

    None, None

    2000-04-01

    The Window Industry Technology Roadmap looks at the trends in window design and installation in 2000 and projects trends for the future.

  14. Information Technology Specialist

    Energy.gov [DOE]

    The Information Technology Services Office (ITSO) is an office within the Office of Business Operations (BO) that provides administrative support to the Office of Energy Efficiency and Renewable...

  15. Solar Energy Technologies Office

    Office of Energy Efficiency and Renewable Energy (EERE)

    In 2011, the Energy Department's Solar Energy Technologies Office (SETO) became the SunShot Initiative, a collaborative national effort that aggressively drives innovation to make solar energy...

  16. Summary - Caustic Recovery Technology

    Office of Environmental Management (EM)

    The Ceramatec Sodium (Na), Super fast Ionic CONductors (NaSICON) membrane has shown ... process utilizes a novel inorganic membrane technology to recover concentrated ...

  17. Director, Geothermal Technologies Office

    Energy.gov [DOE]

    The mission of the Geothermal Technologies Office (GTO) is to accelerate the development and deployment of clean, domestic geothermal resources that will promote a stronger, more productive economy...

  18. Sorption Storage Technology Summary

    Energy.gov [DOE]

    Presented at the R&D Strategies for Compressed, Cryo-Compressed and Cryo-Sorbent Hydrogen Storage Technologies Workshops on February 14 and 15, 2011.

  19. Energy Technology Program Specialist

    Energy.gov [DOE]

    The Office of Energy Efficiency and Renewable Energy is the lead Federal government organization for energy efficiency and renewable energy technology research and development. Its mission is to...

  20. Overview of wind technologies

    SciTech Connect

    None, None

    2009-01-18

    The wind overview section of the Renewable Energy Technology Characterizations describes the technical and economic status of this emerging renewable energy option for electricity supply.

  1. Recycling Technology Validation

    Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  2. Mobile Technology Management

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2013-11-21

    The directive will ensure that federal organizations and employees within the Department can use mobile technology to support mission requirements in a safe and secure manner.

  3. Massachusetts Institute of Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    of Technology Short baseline neutrino workshop, Fermilab, Batavia, IL, May 13, 2011 Test of Lorentz and CPT violation with neutrinos Outline 1. Why Lorentz violation is...

  4. Science & Technology Review Articles

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NIF & Photon Science News Press Releases Experimental Highlights Efficiency Improvements Science & Technology Meetings and Workshops Papers and Presentations NIF&PS People In the ...

  5. Fuel Cell Technologies Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    States Energy Advisory Board (STEAB) Washington, DC Dr. Sunita Satyapal U.S. Department of Energy Fuel Cell Technologies Program Program Manager 3142012 2 | Fuel Cell ...

  6. Appendix C - Industrial technologies

    SciTech Connect

    None, None

    2002-12-20

    This report describes the results, calculations, and assumptions underlying the GPRA 2004 Quality Metrics results for all Planning Units within the Office of Industrial Technologies.

  7. Overview of geothermal technologies

    SciTech Connect

    None, None

    2009-01-18

    The geothermal overview section of the Renewable Energy Technology Characterizations describes the technical and economic status of this emerging renewable energy option for electricity supply.

  8. Ocean Energy Technology Overview

    SciTech Connect

    none,

    2009-08-05

    Introduction to and overview of ocean renewable energy resources and technologies prepared for the U.S. Department of Energy Federal Energy management Program.

  9. Bioconversion Technologies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    to: navigation, search Name: Bioconversion Technologies Place: United Kingdom Sector: Biofuels Product: Second-generation biofuels technology developer References: Bioconversion...

  10. Hydrocarbon Technologies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Technologies Jump to: navigation, search Name: Hydrocarbon Technologies Place: Lawrenceville, New Jersey Zip: 8648 Sector: Efficiency Product: String representation...

  11. National Algal Biofuels Technology Review

    Office of Energy Efficiency and Renewable Energy (EERE)

    Plenary V: National Algal Biofuels Technology Review National Algal Biofuels Technology Review Matthew Posewitz, Professor, Colorado School of Mines

  12. Robotics Technology Crosscutting Program. Technology summary

    SciTech Connect

    1995-06-01

    The Robotics Technology Development Program (RTDP) is a needs-driven effort. A length series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the resulting robotics needs assessment revealed several common threads running through the sites: Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination and Dismantlement (D and D). The RTDP Group also realized that some of the technology development in these four areas had common (Cross Cutting-CC) needs, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) process urged an additional organizational breakdown between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). These factors lead to the formation of the fifth application area for Crosscutting and Advanced Technology (CC and AT) development. The RTDP is thus organized around these application areas -- TWR, CAA, MWO, D and D, and CC and AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.

  13. Emerging Technologies - Capturing Innovation with Technology

    SciTech Connect

    2012-12-01

    ET team research results are critical to achieving 50% energy savings across U.S. buildings within the next two decades. The ET team focuses on supporting research, development, and tech-to-market opportunities of high impact technologies, or those that demonstrate potential for achieving significant energy savings cost effectively.

  14. Assistive Technology | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Assistive Technology Assistive Technology Assistive technology word cloud. Assistive technology word cloud. The DOE Headquarters Accommodation Program was established to provide reasonable computer and related telecommunications accommodations for employees with disabilities. Since implementation of the Assistive Technologies program in 1993, accommodations have increased from an initial 26 to an approximately 700 individual accommodations. The Assistive Technologies program complies with

  15. Digital Actuator Technology

    SciTech Connect

    Ken Thomas; Ted Quinn; Jerry Mauck; Richard Bockhorst

    2014-09-01

    There are significant developments underway in new types of actuators for power plant active components. Many of these make use of digital technology to provide a wide array of benefits in performance of the actuators and in reduced burden to maintain them. These new product offerings have gained considerable acceptance in use in process plants. In addition, they have been used in conventional power generation very successfully. This technology has been proven to deliver the benefits promised and substantiate the claims of improved performance. The nuclear industry has been reluctant to incorporate digital actuator technology into nuclear plant designs due to concerns due to a number of concerns. These could be summarized as cost, regulatory uncertainty, and a certain comfort factor with legacy analog technology. The replacement opportunity for these types of components represents a decision point for whether to invest in more modern technology that would provide superior operational and maintenance benefits. Yet, the application of digital technology has been problematic for the nuclear industry, due to qualification and regulatory issues. With some notable exceptions, the result has been a continuing reluctance to undertake the risks and uncertainties of implementing digital actuator technology when replacement opportunities present themselves. Rather, utilities would typically prefer to accept the performance limitations of the legacy analog actuator technologies to avoid impacts to project costs and schedules. The purpose of this report is to demonstrate that the benefits of digital actuator technology can be significant in terms of plant performance and that it is worthwhile to address the barriers currently holding back the widespread development and use of this technology. It addresses two important objectives in pursuit of the beneficial use of digital actuator technology for nuclear power plants: 1. To demonstrate the benefits of digital actuator

  16. Technology Catalogue. First edition

    SciTech Connect

    Not Available

    1994-02-01

    The Department of Energy`s Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM`s Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM`s Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department`s clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD`s applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina).

  17. Advanced uranium enrichment technologies

    SciTech Connect

    Merriman, R.

    1983-03-10

    The Advanced Gas Centrifuge and Atomic Vapor Laser Isotope Separation methods are described. The status and potential of the technologies are summarized, the programs outlined, and the economic incentives are noted. How the advanced technologies, once demonstrated, might be deployed so that SWV costs in the 1990s can be significantly reduced is described.

  18. Gasification: A Cornerstone Technology

    ScienceCinema

    Gary Stiegel

    2016-07-12

    NETL is a leader in the science and technology of gasification - a process for the conversion of carbon-based materials such as coal into synthesis gas (syngas) that can be used to produce clean electrical energy, transportation fuels, and chemicals efficiently and cost-effectively using domestic fuel resources. Gasification is a cornerstone technology of 21st century zero emissions powerplants

  19. Gasification: A Cornerstone Technology

    SciTech Connect

    Gary Stiegel

    2008-03-26

    NETL is a leader in the science and technology of gasification - a process for the conversion of carbon-based materials such as coal into synthesis gas (syngas) that can be used to produce clean electrical energy, transportation fuels, and chemicals efficiently and cost-effectively using domestic fuel resources. Gasification is a cornerstone technology of 21st century zero emissions powerplants

  20. Additive Manufacturing Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Additive Manufacturing 1 Technology Assessment 2 1. Contents 3 1. Introduction to the Technology/System ............................................................................................... 2 4 1.1 Introduction to Additive Manufacturing ....................................................................................... 2 5 1.2 Additive Manufacturing Processes ............................................................................................... 2 6 1.3 Benefits of Additive

  1. Technology Readiness Assessment Guide

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2011-09-15

    This document was developed to assist individuals and teams that will be involved in conducting Technology Readiness Assessments (TRAs) and developing Technology Maturation Plans (TMPs) for the Department of Energy (DOE) capital acquisition assets subjects to DOE O 413.3B.

  2. Technology Readiness Assessment (TRA)/Technology Maturation Plan (TMP)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Process Guide | Department of Energy Readiness Assessment (TRA)/Technology Maturation Plan (TMP) Process Guide Technology Readiness Assessment (TRA)/Technology Maturation Plan (TMP) Process Guide This document is a guide for those involved in conducting TRAs and developing TMPs for DOE-EM. Technology Readiness Assessment (TRA)/Technology Maturation Plan (TMP) Process Guide (1.19 MB) More Documents & Publications Technology Readiness Assessment Report Small Column Ion Exchange Technology

  3. Accelerating Spectrum Sharing Technologies

    SciTech Connect

    Juan D. Deaton; Lynda L. Brighton; Rangam Subramanian; Hussein Moradi; Jose Loera

    2013-09-01

    Spectrum sharing potentially holds the promise of solving the emerging spectrum crisis. However, technology innovators face the conundrum of developing spectrum sharing technologies without the ability to experiment and test with real incumbent systems. Interference with operational incumbents can prevent critical services, and the cost of deploying and operating an incumbent system can be prohibitive. Thus, the lack of incumbent systems and frequency authorization for technology incubation and demonstration has stymied spectrum sharing research. To this end, industry, academia, and regulators all require a test facility for validating hypotheses and demonstrating functionality without affecting operational incumbent systems. This article proposes a four-phase program supported by our spectrum accountability architecture. We propose that our comprehensive experimentation and testing approach for technology incubation and demonstration will accelerate the development of spectrum sharing technologies.

  4. Renewable Energy a Smart Choice for Farmers and Ranchers - News Releases |

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Renewable Energy Technology Basics Renewable Energy Technology Basics Renewable energy technologies produce sustainable, clean energy from sources such as the sun, the wind, plants, and water. According to the Energy Information Administration, in 2007, renewable sources of energy accounted for about 7% of total energy consumption and 9.4% of total electricity generation in the United States. Renewable energy technologies have the potential to strengthen our nation's energy security, improve

  5. Robotics Technology Development Program. Technology summary

    SciTech Connect

    Not Available

    1994-02-01

    The Robotics Technology Development Program (RTDP) is a ``needs-driven`` effort. A lengthy series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination & Dismantlement (D&D). The RTDP Group realized that much of the technology development was common (Cross Cutting-CC) to each of these robotics application areas, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) process urged an additional organizational break-out between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). The RDTP is thus organized around these application areas -- TWR, CAA, MWO, D&D and CC&AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.

  6. Technology Convergence and National Security

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technology Commercialization Fund Technology Commercialization Fund A core responsibility of the Office of Technology Transitions, and the Technology Transfer Coordinator, is to oversee the expenditure of DOE technology transfer funds. The office is responsible for implementing the Technology Commercialization Fund (TCF) authorized in section 1001 of the Energy Policy Act of 2005. It states, as amended: "The Secretary shall establish an Energy Technology Commercialization Fund, using 0.9%

  7. Taking technology to market

    SciTech Connect

    Ford, D.; Ryan, C.

    1981-03-01

    For many years, the concept of the product life cycle has helped managers maximize their return on product sales. But according to the authors of this article, using a technology solely in product sales is no longer enough. Today, companies face high R and D costs, competitive pressures from low-cost producers, capacity limitations, antitrust laws, financial difficulties, and foreign trade barriers. This means that they must improve the rate of return on their technology investments by marketing their technology as completely as possible during all phases of its life cycle. The technology life cycle - derived from the product life cycle - pinpoints the changing decisions companies face in selling their know-how. The authors also discuss both the competitive dangers of transferring technology to low-cost foreign producers and the growing role of intermediaries in technology sales. They stress the importance of having a highly specialized staff to plan a company's technology marketing, a responsibility that should be assigned neither to the part-time attention of top management nor simply to marketers or strategic planners.

  8. Your Genes, Your Choices: Exploring the Issues Raised by Genetic Research

    SciTech Connect

    Baker, C.

    1999-05-31

    Your Genes, Your Choices provides accurate information about the ethical, legal, and social implications of the Human Genome Project and genetic research in an easy-to-read style and format. Each chapter in the book begins with a brief vignette, which introduces an issue within a human story, and raises a question for the reader to think about as the basic science and information are presented in the rest of the chapter.

  9. Choice of Substrate Material for Epitaxial CdTe Solar Cells

    SciTech Connect

    Song, Tao; Kanevce, Ana; Sites, James R.

    2015-06-14

    Epitaxial CdTe with high quality, low defect density, and high carrier concentration should in principle yield high-efficiency photovoltaic devices. However, insufficient effort has been given to explore the choice of substrate for high-efficiency epitaxial CdTe solar cells. In this paper, we use numerical simulations to investigate three crystalline substrates: silicon (Si), InSb, and CdTe each substrate material are generally discussed.

  10. Modeling Choices and the Effects of Water Runoff on Plant Productivity |

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    U.S. DOE Office of Science (SC) Modeling Choices and the Effects of Water Runoff on Plant Productivity Biological and Environmental Research (BER) BER Home About Research Facilities Science Highlights Searchable Archive of BER Highlights External link Benefits of BER Funding Opportunities Biological & Environmental Research Advisory Committee (BERAC) Community Resources Contact Information Biological and Environmental Research U.S. Department of Energy SC-23/Germantown Building 1000

  11. Magnetic Recording Media Technology for the Tb/in2 Era"

    ScienceCinema

    Bertero, Gerardo [Western Digital

    2016-07-12

    Magnetic recording has been the technology of choice of massive storage of information. The hard-disk drive industry has recently undergone a major technological transition from longitudinal magnetic recording (LMR) to perpendicular magnetic recording (PMR). However, convention perpendicular recording can only support a few new product generations before facing insurmountable physical limits. In order to support sustained recording areal density growth, new technological paradigms, such as energy-assisted recording and bit-patterined media recording are being contemplated and planned. In this talk, we will briefly discuss the LMR-to-PMR transition, the extendibility of current PMR recording, and the nature and merits of new enabling technologies. We will also discuss a technology roadmap toward recording densities approaching 10 Tv/in2, approximately 40 times higher than in current disk drives.

  12. Science & Technology - 2016

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    technology / 2016 / august Science & Technology - 2016 August Take a Virtual Tour of NIF NIF Ultrathin Polymer Film Is an R&D 100 Finalist A robust, scalable method of fabricating freestanding polymer films that are larger, stronger and thinner than conventionally produced films has been named a 2016 R&D 100 finalist. R&D 100 awards recognize the most revolutionary technologies introduced to the market in a given year. This year's R&D 100 winners will be announced at an

  13. Agricultural Equipment Technology Conference

    Energy.gov [DOE]

    The 20th Agricultural Equipment Technology Conference will be held Feb. 8–10, 2016, in Louisville, Kentucky. The conference will bring together professionals and experts in the agricultural and biological engineering fields. Bioenergy Technologies Office (BETO) Terrestrial Feedstocks Technology Manager Sam Tagore will be in attendance. Mr. Tagore will moderate a technical session titled “Ash Reduction Strategies for Improving Biomass Feedstock Quality.” The session will include presentations by researchers from Idaho National Laboratory and Oak Ridge National Laboratory supporting BETO, as well as from university and industry.

  14. OHVT technology roadmap [2000

    SciTech Connect

    Bradley, R.A.

    2000-02-01

    The OHVT Technology Roadmap for 2000 presents the multiyear program plan of the U.S. DOE's Office of Heavy Vehicle Technologies (OHVT). It is an update of the 1997 plan, reflecting changes in regulations and ongoing discussions with DOE's heavy vehicle customers. The technical plan covers three classes of trucks: (1) class 7-8 (large, on-highway trucks); (2) class 3-6 (medium duty trucks); (3) class 1-2 (pickups, vans, and sport utility vehicles) as well as enabling and supporting technologies. The Roadmap documents program goals, schedules, and milestones.

  15. Annual Technology Baseline

    Energy.gov [DOE]

    The National Renewable Energy Laboratory is conducting a study sponsored by the U.S. Department of Energy DOE, Office of Energy Efficiency and Renewable Energy (EERE), that aims to document and implement an annual process designed to identify a realistic and timely set of input assumptions (e.g., technology cost and performance, fuel costs), and a diverse set of potential futures (standard scenarios), initially for electric sector analysis. This primary product of the Annual Technology Baseline (ATB) project component includes detailed cost and performance data (both current and projected) for both renewable and conventional technologies. This data is presented in MS Excel.

  16. FY 2012 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | (NNSA) Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2012 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total Available Fee Total Fee Earned % $41,951,011 $40,706,111 97% Honeywell Federal Manufacturing & Technologies, LLC, the management and operating contractor for the Kansas City Plant, earned an "Excellent" rating in Program, Operations, and Institutional

  17. FY 2012 National Security Technologies, LLC, PER Summary | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) National Security Technologies, LLC, PER Summary SUMMARY OF FY 2012 NATIONAL SECURITY TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total Available Fee Total Fee Earned % $29,855,764 $28,020,923 93.85% National Security Technologies, LLC, the management and operating contractor for the Nevada National Security Site, earned an "Excellent" rating in Program, a "Very Good" in Operations and Institutional and Business Management, and 93.85

  18. Validation of Innovative Exploration Technologies for Newberry Volcano |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy for Newberry Volcano Validation of Innovative Exploration Technologies for Newberry Volcano DOE Geothermal Technologies Peer Review - 2010. Project summary: To effectively combine numerous exploration technologies to gather important data. Once information is combined into 3-D models, a target drilling location will be determined. Deep well capable of finding commercial quantities of geothermal resource will be drilled to validate methodology.

  19. CX-000293: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3: Categorical Exclusion Determination CX-000293: Categorical Exclusion Determination A Novel Biogas Desulphurization Sorbent Technology for Molten Carbonate Fuel Cell - Based Combined Heat and Power Systems CX(s) Applied: B3.6 Date: 12/11/2009 Location(s): Oxnard, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory Develop an expendable, high capacity sorbent to remove sulfur species from anaerobic digester gas, providing an essentially

  20. CX-000294: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4: Categorical Exclusion Determination CX-000294: Categorical Exclusion Determination A Novel Biogas Desulphurization Sorbent Technology for Molten Carbonate Fuel Cell- Based Combined Heat and Power Systems CX(s) Applied: B3.6 Date: 12/11/2009 Location(s): Golden, Colorado Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory Develop an expendable, high capacity sorbent to remove sulfur species from anaerobic digester gas, providing an essentially sulfur-free

  1. CX-000663: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    63: Categorical Exclusion Determination CX-000663: Categorical Exclusion Determination Microhole Arrays Drilled With Advanced Abrasive Slurry Jet Technology To Efficiently Exploit Enhanced Geothermal Systems CX(s) Applied: A9, B3.1, B3.6 Date: 02/09/2010 Location(s): Tulsa, Oklahoma Office(s): Energy Efficiency and Renewable Energy, Golden Field Office This project proposes to develop a cost-effective microhole drilling and completion technology with the Flash Abrasive Slurry Jet (ASJ) system

  2. CX-001319: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    319: Categorical Exclusion Determination CX-001319: Categorical Exclusion Determination Grants for State-Sponsored Renewable Energy and Energy Efficiency Projects - New Jersey Institute of Technology CX(s) Applied: B5.1 Date: 03/17/2010 Location(s): Newark, New Jersey Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory Oak Hall project including new demand-based building controls (variable-frequency drives), boiler replacement, solar water heating, rooftop

  3. CX-003477: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    77: Categorical Exclusion Determination CX-003477: Categorical Exclusion Determination National Institute of Advanced Industrial Science and Technology (AIST) - National Renewable Energy Laboratory (NREL) Concentrator Photovoltaic (CPV) Demonstration (Solar Technology Acceleration Center, Aurora, Colorado); NREL Tracking Number 10-035 CX(s) Applied: A9, A11, B1.3 Date: 08/20/2010 Location(s): Aurora, Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office The proposed

  4. CX-003619: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    19: Categorical Exclusion Determination CX-003619: Categorical Exclusion Determination Advanced Technology Vehicle Manufacturing Project - Model S Manufacturing Facility CX(s) Applied: B1.31 Date: 08/31/2010 Location(s): Fremont, California Office(s): Advanced Technology Vehicles Manufacturing Loan Program The Department of Energy's (DOE's) proposed action is to disburse Federal loan funds to Tesla Motors, Incorporated (Tesla) to manufacture the Model S electric vehicle by retooling and

  5. CX-003703: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3: Categorical Exclusion Determination CX-003703: Categorical Exclusion Determination Florida Hydrogen Initiative - Florida Institute of Technology (Interdisciplinary Hydrogen and Fuel Cell Technology Academic Program) CX(s) Applied: A9 Date: 09/15/2010 Location(s): Florida Office(s): Energy Efficiency and Renewable Energy, Golden Field Office Under the 2004 Congressionally Directed Project (CDP), the University of Central Florida (UCF - formerly Florida Hydrogen Initiative) was awarded funding

  6. CX-100036: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    6: Categorical Exclusion Determination CX-100036: Categorical Exclusion Determination Perovskite Solar Cells for High-Efficiency Tandems CX(s) Applied: B3.15 Date: 08/13/2014 Location(s): California Offices(s): Golden Field Office Technology Office: Solar Energy Technologies Award Number: DE-EE0006707 DOE is proposing to provide federal funding to Stanford University to develop prototype solar cells. CX-100036.pdf (469.59 KB) More Documents & Publications CX-100037: Categorical Exclusion

  7. CX-100048: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    48: Categorical Exclusion Determination CX-100048: Categorical Exclusion Determination Rapid Development of Hybrid Perovskites and Novel Tandem Architectures CX(s) Applied: A9, B3.6, B3.15 Date: 09/09/2014 Location(s): Washington Offices(s): Golden Field Office Technology Office: Solar Energy Technologies Award Number: DE-EE0006710 DOE is proposing to provide funding to University of Washington to develop novel architecture solar cells utilizing hybrid perovskites and a Copper-Indium-Gallium

  8. Categorical Exclusion Determinations: A11 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1 Categorical Exclusion Determinations: A11 Existing Regulations A11: Technical advice and assistance to organizations Technical advice and planning assistance to international, national, state, and local organizations. DOCUMENTS AVAILABLE FOR DOWNLOAD September 22, 2016 CX-100759 Categorical Exclusion Determination Accelerating Market Adoption of Best-in-class Building Technologies, the Technology Demonstration Initiative (TDI) Award Number: DE-EE0007065 CX(s) Applied: A9, A11 Buildings

  9. CX-000292: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    292: Categorical Exclusion Determination CX-000292: Categorical Exclusion Determination A Novel Biogas Desulphurization Sorbent Technology for Molten Carbonate Fuel Cell - Based Combined Heat and Power Systems CX(s) Applied: B3.6 Date: 12/10/2009 Location(s): Wheat Ridge, Colorado Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory Develop an expendable, high capacity sorbent to remove sulfur species from anaerobic digester gas, providing an essentially

  10. CX-002588: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    588: Categorical Exclusion Determination CX-002588: Categorical Exclusion Determination A Novel Biogas Desulfurization Sorbent Technology for Molten Carbonate Fuel Cell-Based Combined Heat and Power Systems CX(s) Applied: B3.6 Date: 12/11/2009 Location(s): Danbury, Connecticut Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory Develop an expendable, high capacity sorbent to remove sulfur species from anaerobic digester gas, providing an essentially

  11. CX-007388: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    388: Categorical Exclusion Determination CX-007388: Categorical Exclusion Determination Regional Test Center Project: Solar Technology Acceleration Center (SolarTAC) CX(s) Applied: B1.15, B1.31, B5.15 Date: 12/20/2011 Location(s): Colorado Offices(s): Golden Field Office The National Renewable Energy Laboratory (NREL) Concentrating Photovoltaics (CPV) and Concentrating Solar Power (CSP) programs are collaborating with MRI to expand the Solar Technology Acceleration Center (SolarTac) Site Use

  12. CX-010510: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    510: Categorical Exclusion Determination CX-010510: Categorical Exclusion Determination Rapid Freeform Sheet Metal Forming: Technology Development and System Verification CX(s) Applied: A9, B3.6 Date: 06/24/2013 Location(s): Michigan, Illinois, Pennsylvania Offices(s): Golden Field Office The U.S. Department of Energy (DOE) is proposing to provide federal funding to Ford Motor Company to develop a transformational rapid freeform sheet metal forming technology in an industrial environment.

  13. CX-100462 Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    62 Categorical Exclusion Determination CX-100462 Categorical Exclusion Determination State Energy Strategies and Innovation Studies Award Number: DE-FOA-0001496 CX(s) Applied: A9 Solar Energy Technologies Office Date: 02/01/2016 Location(s): Nationwide Office(s): Golden Field Office DOE is proposing to issue a Funding Opportunity Announcement (DE-FOA-0001496) though which the Solar Energy Technologies Office would provide financial assistance to applicants with proposals aimed at reducing the

  14. New EM Technology: Spray Lights up Contamination Hot Spots

    Energy.gov [DOE]

    OAK RIDGE, Tenn. – Oak Ridge National Laboratory (ORNL) researchers have developed a new technology to determine the extent of contamination in Cold War facilities that could replace costly and time-consuming traditional survey methods used by EM.

  15. 2013 DOE Bioenergy Technologies Office (BETO) Project Peer Review

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies Office (BETO) Project Peer Review Defining Sustainability Date: May 22, 2013 Technology Area Review: Analysis and Sustainability Principal Investigator: Virginia Dale Organization: Oak Ridge National Laboratory This presentation does not contain any proprietary, confidential, or otherwise restricted information. Goal Statement * Goal: To ensure long term supply of sustainable feedstock and bioenergy by determining - How bioenergy production can affect sustainability - How those

  16. CX-014274: Categorical Exclusion Determination | Department of Energy

    Office of Environmental Management (EM)

    4: Categorical Exclusion Determination CX-014274: Categorical Exclusion Determination Low-Cost, Durable, Containment-Tolerant Cathodes for SOFCs CX(s) Applied: A9, B3.6 Date: 08/27/2015 Location(s): Georgia Offices(s): National Energy Technology Laboratory Bench-scale lab experiments on solid oxide fuel cells. Document(s) Available for Download CX-014274.pdf (155.26 KB) More Documents & Publications CX-014041: Categorical Exclusion Determination CX-014067: Categorical Exclusion Determination

  17. CX-100474 Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4 Categorical Exclusion Determination CX-100474 Categorical Exclusion Determination Final Determination of Coverage for Miscellaneous Refrigeration Products RIN 1904-AC66 CX(s) Applied: A6 EERE-Buildings Technology Program Date: 02/18/2016 Location(s): Nationwide Office(s): Golden Field Office Under this Supplemental Proposed Determination DOE proposes that miscellaneous refrigeration products (MREFs), which include coolers (wine chillers and similar products) and combination cooler

  18. Categorical Exclusion Determinations: New Jersey | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Jersey Categorical Exclusion Determinations: New Jersey Location Categorical Exclusion Determinations issued for actions in New Jersey. DOCUMENTS AVAILABLE FOR DOWNLOAD September 8, 2016 CX-100737 Categorical Exclusion Determination High penetration DER system forecasting with hybrid models Award Number: DE-EE0007597 CX(s) Applied: A9 Solar Energy Technologies Office Date: 8/19/2016 Location(s): NJ Office(s): Golden Field Office March 7, 2016 CX-100541 Categorical Exclusion Determination

  19. Categorical Exclusion Determinations: West Virginia | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Virginia Categorical Exclusion Determinations: West Virginia Location Categorical Exclusion Determinations issued for actions in West Virginia. DOCUMENTS AVAILABLE FOR DOWNLOAD February 29, 2016 CX-014596: Categorical Exclusion Determination Low-Pressure Development Combustor CX(s) Applied: B3.6 Date: 02/29/2016 Location(s): West Virginia Offices(s): National Energy Technology Laboratory January 12, 2016 CX-014616: Categorical Exclusion Determination Biogasification CX(s) Applied: B3.6 Date:

  20. Categorical Exclusion Determinations: Y-12 Site Office | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Y-12 Site Office Categorical Exclusion Determinations: Y-12 Site Office Categorical Exclusion Determinations issued by Y-12 Site Office. DOCUMENTS AVAILABLE FOR DOWNLOAD April 28, 2016 CX-014746: Categorical Exclusion Determination NEPA 4752, Depleted Uranium Technology Testing for the Uranium Processing Facility CX(s) Applied: B3.6 Date: 04/28/2016 Location(s): Tennessee Offices(s): Y-12 Site Office September 3, 2015 CX-014328: Categorical Exclusion Determination Y-12 Fire Station