National Library of Energy BETA

Sample records for technology cases annual

  1. Annual Technology Baseline

    Energy.gov [DOE]

    The National Renewable Energy Laboratory is conducting a study sponsored by the U.S. Department of Energy DOE, Office of Energy Efficiency and Renewable Energy (EERE), that aims to document and implement an annual process designed to identify a realistic and timely set of input assumptions (e.g., technology cost and performance, fuel costs), and a diverse set of potential futures (standard scenarios), initially for electric sector analysis. This primary product of the Annual Technology Baseline (ATB) project component includes detailed cost and performance data (both current and projected) for both renewable and conventional technologies. This data is presented in MS Excel.

  2. 2016 Annual Technology Baseline

    DOE Data Explorer

    Hand, Maureen; Kurup, Parthiv

    2016-09-15

    Current and future cost and performance data for electricity generating technologies, including both renewable and conventional technologies.

  3. Sybase Case Study: Database Technology Company Saves $262,000 Annually

    SciTech Connect

    2010-06-25

    This case study describes the steps Sybase, Inc. took to improve their data center efficiency and how they confirmed that DOE's DC Pro tools provide accurate estimates of potential energy savings.

  4. Geothermal Technologies Program Annual Peer Review Presentation...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Annual Peer Review Presentation By Doug Hollett Geothermal Technologies Program Annual Peer Review Presentation By Doug Hollett 2012 Peer Review presentation by Doug Hollett, ...

  5. 2015 Annual Merit Review, Vehicle Technologies Office

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Using lightweight components and high-efficiency engines enabled by advanced materials in one quarter of the U.S. fleet could save more than 5 billion gallons of fuel annually by 2030. The U.S. Department of Energy (DOE) Vehicle Technologies Office (VTO) collaborates with industry to improve materials that will increase vehicle efficiency while meeting consumer and industry expectations. It does this through work on both Lightweight Materials and Propulsion Materials. In the case of Propulsion

  6. Welcome to the Geothermal Technologies Program 2012 Annual Peer...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Welcome to the Geothermal Technologies Program 2012 Annual Peer Review Welcome to the Geothermal Technologies Program 2012 Annual Peer Review GTP Annual Peer Review presentation by ...

  7. Bioenergy Technologies Office Fiscal Year 2014 Annual Report...

    Office of Environmental Management (EM)

    Fiscal Year 2014 Annual Report Bioenergy Technologies Office Fiscal Year 2014 Annual Report Bioenergy Technologies Office Fiscal Year 2014 Annual Report beto2014annualreport.pdf ...

  8. Geothermal Technologies Office Annual Report 2012

    SciTech Connect

    none,

    2012-12-31

    This annual report for the U.S. Department of Energy’s Geothermal Technologies Office highlights program areas, special projects, and accomplishments in 2012.

  9. Waste Processing Annual Technology Development Report 2007

    Office of Environmental Management (EM)

    United States Department of Energy Waste Processing Annual Technology Development ... Dr. S. L. Krahn, Director EM-21 Office of Waste Processing U. S. Department of Energy ...

  10. 2015 Fuel & Lubricant Technologies Annual Report

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    comprise this report. 2015 ANNUAL REPORT FUEL AND LUBRICANT TECHNOLOGIES ii Nomenclature ... AVFL Advanced VehicleFuelLubricants AW antiwear Bench. benchmark BHT butylated hydroxy ...

  11. Technology Deployment Annual Report 2009

    SciTech Connect

    Keith Arterburn

    2009-12-01

    Idaho National Laboratory (INL) is a Department of Energy (DOE) multi-program national laboratory that conducts research and development in all DOE mission areas. Like all other federal laboratories, INL has a statutory, technology transfer mission to make its capabilities and technologies available to all federal agencies, to state and local governments, and to universities and industry. To fulfill this mission, INL encourages its scientific, engineering, and technical staff to disclose new inventions and creations to ensure the resulting intellectual property is captured, protected, and made available to others who might benefit from it. As part of the mission, intellectual property is licensed to industrial partners for commercialization, creating jobs and delivering the benefits of federally funded technology to consumers. In other cases, unique capabilities are made available to other federal agencies or to regional small businesses to solve specific technical challenges. In other interactions, INL employees work cooperatively with researchers and other technical staff of our partners to further develop emerging technologies. This report is a catalog of selected INL technology transfer and commercialization transactions during this past year. The size and diversity of INL technical resources, coupled with the large number of relationships with other organizations, virtually ensures that a report of this nature will fail to capture all interactions. Recognizing this limitation, this report focuses on transactions that are specifically authorized by technology transfer legislation (and corresponding contractual provisions) or involve the transfer of legal rights to technology to other parties.

  12. Vehicle Technologies Office: Fuel and Lubricant Technologies 2015 Annual

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Progress Report | Department of Energy Fuel and Lubricant Technologies 2015 Annual Progress Report Vehicle Technologies Office: Fuel and Lubricant Technologies 2015 Annual Progress Report This report describes the progress made on the research and development projects funded by the Fuel and Lubricant subprogram in the Vehicle Technologies Office in 2015, as described on the Lubricants and Alternative Fuels pages. Past year's reports are listed on the Annual Progress Reports page.

  13. 2008 Annual Merit Review Results Summary - 10. Fuels Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    0. Fuels Technologies 2008 Annual Merit Review Results Summary - 10. Fuels Technologies DOE Vehicle Technologies Annual Merit Review 2008meritreview10.pdf (1.49 MB) More ...

  14. 2008 Annual Merit Review Results Summary - 16. Technology Integration...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    6. Technology Integration and Education 2008 Annual Merit Review Results Summary - 16. Technology Integration and Education DOE Vehicle Technologies Annual Merit Review ...

  15. Vehicle Technologies Office: 2014 Electric Drive Technologies Annual

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Progress Report | Department of Energy Electric Drive Technologies Annual Progress Report Vehicle Technologies Office: 2014 Electric Drive Technologies Annual Progress Report The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system

  16. Technology Deployment Case Studies

    Energy.gov [DOE]

    Find technology deployment case studies below. Click on each individual project link to see the full case study. You can also view a map of technology deployment case studies.

  17. Geothermal Technologies Office Annual Report 2012

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    YEAR IN REVIEW Annual Report 2012 GEOTHERMAL TECHNOLOGIES OFFICE Energy Efficiency & Renewable Energy For more information about the Geothermal Technologies Office, visit www. geothermal. energy.gov. Contents 2 6 9 14 16 17 18 Hydrothermal Enhanced Geothermal Systems Systems Analysis GTO Team Meetings that Matter Acronym List Education and Outreach Program Updates www.geothermal.energy.gov / email geothermal@ee.doe.gov DOE/EE-0833 * December 2012 The Geothermal Technologies Office Annual

  18. 2012 Annual Merit Review Results Report - Materials Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies: Propulsion Materials 2012 Annual Merit Review Results Report - Materials Technologies: Propulsion Materials Merit review of DOE Vehicle Technologies research ...

  19. 2013 Annual Merit Review Results Report - Materials Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies: Propulsion Materials 2013 Annual Merit Review Results Report - Materials Technologies: Propulsion Materials Merit review of DOE Vehicle Technologies research ...

  20. 2011 Annual Merit Review Results Report - Materials Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies: Propulsion Materials 2011 Annual Merit Review Results Report - Materials Technologies: Propulsion Materials Merit review of DOE Vehicle Technologies research ...

  1. NREL: Energy Analysis - Annual Technology Baseline and Standard...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Annual Technology Baseline and Standard Scenarios - Legacy Versions This section contains earlier versions of NREL's Annual Technology Baseline and Standard Scenarios products. ...

  2. Technology Deployment Annual Report 2010

    SciTech Connect

    Keith Arterburn

    2010-12-01

    This report is a catalog of selected INL technology transfer and commercialization transactions during FY-2010.

  3. Bioenergy Technologies Office Fiscal Year 2014 Annual Report | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Fiscal Year 2014 Annual Report Bioenergy Technologies Office Fiscal Year 2014 Annual Report Bioenergy Technologies Office Fiscal Year 2014 Annual Report beto_2014_annual_report.pdf (5.36 MB) More Documents & Publications November 2013 News Blast August 2014 Monthly News Blast Recent Activity on Bioproducts that enable Biofuels in the Bioenergy Technologies Office

  4. Vehicle Technologies Office: 2008 Propulsion Materials R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    08 Propulsion Materials R&D Annual Progress Report Vehicle Technologies Office: 2008 Propulsion Materials R&D Annual Progress Report PDF icon 2008propulsionmaterials.pdf More ...

  5. 2012 Annual Merit Review Results Report - Energy Storage Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2amr02.pdf (10.14 MB) More Documents & Publications 2011 Annual Merit Review Results Report - Energy Storage Technologies 2012 Annual Merit Review Results Report - Energy Storage ...

  6. Vehicle Technologies Office Publishes 2014 Annual Merit Review...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Publishes 2014 Annual Merit Review Report Vehicle Technologies Office Publishes 2014 Annual ... consideration by DOE in generating future ... The 2015 AMR is scheduled for June 8-12. ...

  7. Vehicle Technologies Office: 2014 Lightweight Materials R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Annual Progress Report Vehicle Technologies Office: 2014 Lightweight Materials R&D Annual Progress Report The Lightweight Materials research and development (R&D) area within the ...

  8. 2015 DOE Vehicle Technologies Office Annual Merit Review (Technical...

    Office of Scientific and Technical Information (OSTI)

    Title: 2015 DOE Vehicle Technologies Office Annual Merit Review The 2015 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) ...

  9. 2011 Annual Merit Review Results Report - Materials Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies 2011 Annual Merit Review Results Report - Materials Technologies Merit review of DOE Vehicle Technologies research activities 2011amr06.pdf (5.51 MB) More Documents ...

  10. 2011 Annual Merit Review Results Report - Technology Integration...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technology Integration 2011 Annual Merit Review Results Report - Technology Integration Merit review of DOE Vehicle Technologies research activities 2011amr08.pdf (2.31 MB) More ...

  11. 2013 Annual Merit Review Results Report - Technology Integration...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technology Integration 2013 Annual Merit Review Results Report - Technology Integration Merit review of DOE Vehicle Technologies research activities 2013amr08.pdf (3.15 MB) More ...

  12. 2014 Annual Merit review Results Report - Materials Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    review Results Report - Materials Technologies 2014 Annual Merit review Results Report - Materials Technologies Merit review of DOE Vehicle Technologies research activities ...

  13. 2012 Annual Merit Review Results Report - Technology Integration...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technology Integration 2012 Annual Merit Review Results Report - Technology Integration Merit review of DOE Vehicle Technologies research activities 2012amr08.pdf (5.98 MB) More ...

  14. 2013 Annual Merit Review Results Report - Materials Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies 2013 Annual Merit Review Results Report - Materials Technologies Merit review of DOE Vehicle Technologies research activities 2013amr06.pdf (4.04 MB) More Documents ...

  15. 2014 Annual Merit review Results Report - Technology Integration...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    review Results Report - Technology Integration 2014 Annual Merit review Results Report - Technology Integration Merit review of DOE Vehicle Technologies research activities ...

  16. 2012 Annual Merit Review Results Report - Materials Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies 2012 Annual Merit Review Results Report - Materials Technologies Merit review of DOE Vehicle Technologies research activities 2012amr06.pdf (5.04 MB) More Documents ...

  17. 2014 Annual Merit Review Results Report - Energy Storage Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Storage Technologies 2014 Annual Merit Review Results Report - Energy Storage Technologies Merit review of DOE Vehicle Technologies research activities 2014amr02.pdf ...

  18. 2011 Annual Merit Review Results Report - Energy Storage Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Storage Technologies 2011 Annual Merit Review Results Report - Energy Storage Technologies Merit review of DOE Vehicle Technologies research activities 2011amr02.pdf ...

  19. Vehicle Technologies Office: 2015 Annual Merit Review Report...

    Energy Saver

    Vehicle Technologies Office: 2015 Annual Merit Review Report The 2015 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) ...

  20. Vehicle Technologies Office: 2011 Advanced Combustion R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    11 Advanced Combustion R&D Annual Progress Report Vehicle Technologies Office: 2011 Advanced Combustion R&D Annual Progress Report Annual report on the work of the the Advanced...

  1. Vehicle Technologies Office: 2011 Advanced Combustion R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Combustion R&D Annual Progress Report Vehicle Technologies Office: 2011 Advanced Combustion R&D Annual Progress Report Annual report on the work of the the Advanced Combustion ...

  2. Vehicle Technologies Office: 2012 Advanced Combustion R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Combustion R&D Annual Progress Report Vehicle Technologies Office: 2012 Advanced Combustion R&D Annual Progress Report Annual report on the work of the the Advanced Combustion ...

  3. Geothermal Technologies Office Annual Report 2012 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Annual Report 2012 Geothermal Technologies Office Annual Report 2012 This annual report for the U.S. Department of Energys Geothermal Technologies Office highlights program areas, special projects, and accomplishments in 2012. geothermalannualreport2012.pdf (9.52 MB) More Documents & Publications Geothermal Technologies Office 2012 Peer Review Report GTO 2013 GRC Keynote Stanford Geothermal Workshop - Geothermal Technologies Office

  4. Vehicle Technologies Office: Annual Progress Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Annual Progress Reports Vehicle Technologies Office: Annual Progress Reports Each year, the Vehicle Technologies Office produces an overall report summarizing its Annual Merit Review, as well as annual reports for each of its six subprogram areas of research and development. These reports highlight technology improvements and other progress made towards reaching the individual subprogram's goals. The annual reports also show how these accomplishments fit into the broader context of supporting

  5. Vehicle Technologies Office Publishes 2014 Annual Merit Review Report

    Energy.gov [DOE]

    DOE's Vehicle Technologies Office has released its report summarizing the results of the 2014 Annual Merit Review.

  6. Vehicle Technologies Office: Annual Merit Review and Peer Evaluation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Events » Vehicle Technologies Office: Annual Merit Review and Peer Evaluation Vehicle Technologies Office: Annual Merit Review and Peer Evaluation At the Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation, advanced vehicle technologies projects funded by VTO are presented and reviewed for their merit. The Merit Review presentations from past years are in the Annual Merit Review presentation database. The reviewers come from a variety of

  7. 2012 Annual Merit Review Results Report - Energy Storage Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3amr02.pdf (11.12 MB) More Documents & Publications 2011 Annual Merit Review Results Report - Energy Storage Technologies 2010 DOE EERE Vehicle Technologies Program Merit Review ...

  8. 2014 Annual Merit Review Results Report - Materials Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Review Results Report - Materials Technologies: Propulsion Materials 2014 Annual Merit Review Results Report - Materials Technologies: Propulsion Materials Merit review of DOE ...

  9. Vehicle Technologies Office Publishes 2015 Annual Merit Review...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Technologies Office Publishes 2015 Annual Merit Review Report Vehicle Technologies Office Publishes 2015 ... into consideration by DOE in generating future work plans. ...

  10. 2011 Annual Planning Summary for National Energy Technology Laboratory...

    Energy.gov [DOE] (indexed site)

    National Energy Technology Laboratory (See Fossil Energy). PDF icon 2011 Annual Planning Summary for National Energy Technology Laboratory (NETL) More Documents & Publications 2011 ...

  11. Vehicle Technologies Office: 2015 Vehicle Systems Annual Progress...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Technologies Office: 2015 Vehicle Systems Annual Progress Report The Vehicle Systems research and development (R&D) subprogram within the DOE Vehicle Technologies Office ...

  12. 2012 Annual Planning Summary for EM Energy Technology Engineering...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EM Energy Technology Engineering Center 2012 Annual Planning Summary for EM Energy Technology Engineering Center The ongoing and projected Environmental Assessments and ...

  13. Proceedings of the 22nd annual offshore technology conference

    SciTech Connect

    Not Available

    1990-01-01

    This book contains the proceedings of the 22nd annual offshore technology conference, Volume 2. Topics covered include: Exploration update: Mackenzie Delta/Beaufort Sea Region, Arctic Canada; Dispersion of waves from hurricane Gilbert and their intermittent reception of the Alabama coast; a Bothnian Bay manganese nodule deposit: a case of inference of seabed variability; and use of an electronic imaging system on a major offshore project.

  14. Laser Science & Technology Program Annual Report - 2000

    SciTech Connect

    Chen, H-L

    2001-03-20

    The Laser Science and Technology (LS&T) Program Annual Report 2001 provides documentation of the achievements of the LLNL LS&T Program during the April 2001 to March 2002 period using three formats: (1) an Overview that is a narrative summary of important results for the year; (2) brief summaries of research and development activity highlights within the four Program elements: Advanced Lasers and Components (AL&C), Laser Optics and Materials (LO&M), Short Pulse Laser Applications and Technologies (SPLAT), and High-Energy Laser System and Tests (HELST); and (3) a compilation of selected articles and technical reports published in reputable scientific or technology journals in this period. All three elements (Annual Overview, Activity Highlights, and Technical Reports) are also on the Web: http://laser.llnl.gov/lasers/pubs/icfq.html. The underlying mission for the LS&T Program is to develop advanced lasers, optics, and materials technologies and applications to solve problems and create new capabilities of importance to the Laboratory and the nation. This mission statement has been our guide for defining work appropriate for our Program. A major new focus of LS&T beginning this past year has been the development of high peak power short-pulse capability for the National Ignition Facility (NIF). LS&T is committed to this activity.

  15. Vehicle Technologies Office: Annual Merit Review Presentations | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Annual Merit Review Presentations Vehicle Technologies Office: Annual Merit Review Presentations At the Vehicle Technologies Office Annual Merit Review and Peer Evaluation, advanced vehicle technologies projects funded by VTO are presented and reviewed for their merit. The Merit Review presentations from past years are in the below database. Learn more about the Vehicle Technologies Office's work. Presentation Year Technology Area Merit Review Presentations Table

  16. Bioenergy Technologies Office Fiscal Year 2014 Annual Report

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Office Fiscal Year 2014 Annual Report May 2015 (This page intentionally left blank) Bioenergy Technologies Office Fiscal Year 2014 Annual Report May 2015 BIOENERGY TECHNOLOGIES OFFICE FISCAL YEAR 2014 ANNUAL REPORT i Table of Contents Letter from the Director ..................................................................................................................................1 List of Acronyms

  17. Welcome to the Geothermal Technologies Program 2012 Annual Peer Review |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Welcome to the Geothermal Technologies Program 2012 Annual Peer Review Welcome to the Geothermal Technologies Program 2012 Annual Peer Review GTP Annual Peer Review presentation by Ava Coy gtp_2012peerreview_opening_acoy.pdf (164.51 KB) More Documents & Publications 2014 Advanced Grid Modeling Program Peer Review 2012 Smart Grid Peer Review 2013 Peer Review Agenda

  18. Building technologies program. 1995 annual report

    SciTech Connect

    Selkowitz, S.E.

    1996-05-01

    The 1995 annual report discusses laboratory activities in the Building Technology Program. The report is divided into four categories: windows and daylighting, lighting systems, building energy simulation, and advanced building systems. The objective of the Building Technologies program is to assist the U.S. building industry in achieving substantial reductions in building-sector energy use and associated greenhouse gas emissions while improving comfort, amenity, health, and productivity in the building sector. Past efforts have focused on windows and lighting, and on the simulation tools needed to integrate the full range of energy efficiency solutions into achievable, cost-effective design solutions for new and existing buildings. Current research is based on an integrated systems and life-cycle perspective to create cost-effective solutions for more energy-efficient, comfortable, and productive work and living environments. Sixteen subprograms are described in the report.

  19. Vehicle Technologies Office: 2013 Advanced Combustion R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Combustion R&D Annual Progress Report Vehicle Technologies Office: 2013 Advanced Combustion R&D Annual Progress Report This report describes the progress made on the research and ...

  20. Vehicle Technologies Office: 2009 Advanced Combustion R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    9 Advanced Combustion R&D Annual Progress Report Vehicle Technologies Office: 2009 Advanced Combustion R&D Annual Progress Report The Advanced Combustion Engine R&D subprogram ...

  1. Vehicle Technologies Office: 2010 Advanced Combustion R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    10 Advanced Combustion R&D Annual Progress Report Vehicle Technologies Office: 2010 Advanced Combustion R&D Annual Progress Report 2010advcombustionengine.pdf (16.62 MB) More ...

  2. Vehicle Technologies Office: 2008 Advanced Combustion R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Combustion R&D Annual Progress Report Vehicle Technologies Office: 2008 Advanced Combustion R&D Annual Progress Report 2008advcombustionengine.pdf (13.18 MB) More Documents & ...

  3. Vehicle Technologies Office: 2013 Lightweight Materials R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lightweight Materials R&D Annual Progress Report Vehicle Technologies Office: 2013 Lightweight Materials R&D Annual Progress Report As part of the U.S. Department of Energy's ...

  4. 2014 Annual Report, Geothermal Technologies Office | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4 Annual Report, Geothermal Technologies Office 2014 Annual Report, Geothermal Technologies Office A DOE-funded EGS demonstration at Newberry Volcano, Oregon could help unlock 100+GW of geothermal energy nationwide. source: Elisabet Metcalfe A DOE-funded EGS demonstration at Newberry Volcano, Oregon could help unlock 100+GW of geothermal energy nationwide. source: Elisabet Metcalfe The Energy Department's 2014 Geothermal Technologies Office (GTO) Annual Report-a product of the Office of Energy

  5. Geothermal Technologies Program Annual Peer Review Presentation By Doug

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hollett | Department of Energy Annual Peer Review Presentation By Doug Hollett Geothermal Technologies Program Annual Peer Review Presentation By Doug Hollett 2012 Peer Review presentation by Doug Hollett, Program Manager, Geothermal Technologies Program gtp_2012peerreview_dhollett.pdf (893.66 KB) More Documents & Publications Stanford Geothermal Workshop - Geothermal Technologies Office Stanford Geothermal Workshop 2012 Annual Meeting FORGE, 2015 Peer Review Plenary

  6. THE TENTH ANNUAL SOLID-STATE LIGHTING TECHNOLOGY DEVELOPMENT WORKSHOP |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy THE TENTH ANNUAL SOLID-STATE LIGHTING TECHNOLOGY DEVELOPMENT WORKSHOP THE TENTH ANNUAL SOLID-STATE LIGHTING TECHNOLOGY DEVELOPMENT WORKSHOP More than 230 lighting leaders from across North America gathered in Portland, OR, November 17-18, 2015, for the tenth annual Solid-State Lighting Technology Development Workshop, hosted by DOE. The diverse audience spanned the spectrum of SSL stakeholders, representing lighting, control, and components companies as well as research

  7. FY 2014 Annual Progress Report - Electric Drive Technology Program

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    FY 2014 Annual Progress Report iii Electric Drive Technologies Program CONTENTS ACRONYMS AND ABBREVIATIONS ........................................................................................................................ xvi I. INTRODUCTION ................................................................................................................................................... 1 1.0 Introduction

  8. 2013 Annual Planning Summary for the National Energy Technology...

    Energy.gov [DOE] (indexed site)

    The National Energy Technology Laboratory's APS was consolidated within the Office of Fossils Energy APS available here More Documents & Publications 2013 Annual Planning Summary ...

  9. Vehicle Technologies Office: 2008 Propulsion Materials R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report Vehicle Technologies Office: 2008 Propulsion Materials R&D Annual Progress Report PDF icon 2008propulsionmaterials.pdf More Documents & Publications Vehicle ...

  10. Vehicle Technologies Office: 2013 Propulsion Materials R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PDF icon 2013ProgressReportforPropulsionMaterials.pdf More Documents & Publications NOx sensor development Vehicle Technologies Office: 2008 Propulsion Materials R&D Annual ...

  11. Technology Transfer Annual Report Fiscal Year 2015

    SciTech Connect

    Skinner, Wendy Lee

    2015-12-01

    Idaho National Laboratory (INL) is a Department of Energy (DOE) multi-program national laboratory that conducts research and development in all DOE mission areas. Like all other federal laboratories, INL has a statutory, technology transfer mission to make its capabilities and technologies available to federal agencies, state and local governments, universities, and industry. To fulfill this mission, INL encourages its scientific, engineering, and technical staff to disclose new inventions and creations to ensure the resulting intellectual property is captured, protected, and available to others who might benefit from it. As part of the mission, intellectual property is licensed to industrial partners for commercialization, job creation, and delivering the benefits of federally funded technology to consumers. In some cases, unique capabilities are made available to other federal agencies, international organizations, domestic and foreign commercial entities, or small businesses to solve specific technical challenges. INL employees work cooperatively with researchers and technical staff from the university and industrial sectors to further development of emerging technologies. In this multinational global economy, INL is contributing to the development of the next generation of engineers and scientists by licensing software to educational institutions throughout the world. This report is a catalog of select INL technology transfer and commercialization transactions and research agreements that were executed during this past year. The size and diversity of INL technical resources, coupled with the large number of relationships with other organizations, virtually ensures that a report of this nature will fail to capture all interactions. Recognizing this limitation, this report focuses on transactions that are specifically authorized by technology transfer legislation (and corresponding contractual provisions) or involve the transfer of legal rights to technology to

  12. Technology Deployment Annual Report 2013 December

    SciTech Connect

    N /A

    2014-01-01

    Idaho National Laboratory (INL) is a Department of Energy (DOE) multi-program national laboratory that conducts research and development in all DOE mission areas. Like all other federal laboratories, INL has a statutory technology transfer mission to make its capabilities and technologies available to all federal agencies, to state and local governments, and to universities and industry. To fulfill this mission, INL encourages its scientific, engineering, and technical staff to disclose new inventions and creations to ensure the resulting intellectual property is captured, protected, and made available to others who might benefit from it. As part of the mission, intellectual property is licensed to industrial partners for commercialization, creating jobs and delivering the benefits of federally funded technology to consumers. In other cases, unique capabilities are made available to other federal agencies or to regional small businesses to solve specific technical challenges. INL employees also work cooperatively with researchers and technical staff from the university and industrial sectors to further develop emerging technologies. In a multinational global economy, INL is contributing to the development of the next generation of engineers and scientists by licensing software to educational institutions throughout the world. This report is a catalog of selected INL technology transfer and commercialization transactions during this past year. The size and diversity of INL technical resources, coupled with the large number of relationships with other organizations, virtually ensures that a report of this nature will fail to capture all interactions. Recognizing this limitation, this report focuses on transactions that are specifically authorized by technology transfer legislation (and corresponding contractual provisions) or involve the transfer of legal rights to technology to other parties. This report was compiled from primary records, which were readily

  13. Technology Transfer and Commercialization Annual Report 2008

    SciTech Connect

    Michelle R. Blacker

    2008-12-01

    The Idaho National Laboratory (INL) is a Department of Energy (DOE) multi-program national laboratory that conducts research and development in all DOE mission areas. Like all other federal laboratories, INL has a statutory, technology transfer mission to make its capabilities and technologies available to all federal agencies, to state and local governments, and to universities and industry. To fulfill this mission, INL encourages its scientific, engineering, and technical staff to disclose new inventions and creations to ensure the resulting intellectual property is captured, protected, and made available to others who might benefit from it. As part of the mission, intellectual property is licensed to industrial partners for commercialization, creating jobs and delivering the benefits of federally funded technology to consumers. In other cases, unique capabilities are made available to other federal agencies or to regional small businesses to solve specific technical challenges. In other interactions, INL employees work cooperatively with researchers and other technical staff of our partners to further develop emerging technologies. This report is a catalog of selected INL technology transfer and commercialization transactions during this past year. The size and diversity of INL technical resources, coupled with the large number of relationships with other organizations, virtually ensures that a report of this nature will fail to capture all interactions. Recognizing this limitation, this report focuses on transactions that are specifically authorized by technology transfer legislation (and corresponding contractual provisions) or involve the transfer of legal rights to technology to other parties. This report was compiled from primary records, which were readily available to the INL’s Office of Technology Transfer & Commercialization. The accomplishments cataloged in the report, however, reflect the achievements and creativity of the highly skilled researchers

  14. Vehicle Technologies Office: 2015 Annual Merit Review Full Report

    Energy.gov [DOE]

    The 2015 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 8-12, 2015,...

  15. NREL: Energy Analysis - Annual Technology Baseline and Standard Scenarios

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Annual Technology Baseline and Standard Scenarios NREL annually documents a realistic and timely set of input assumptions (e.g., technology cost, fuel costs), and a diverse set of potential futures (Standard Scenarios) to support and inform electric sector analysis in the United States. The products of this work, including assessments of current and projected technology cost and performance for both renewable and conventional electricity generation technologies, as well as market projections of

  16. Technology Deployment Annual Report 2014 December

    SciTech Connect

    Arterburn, George K.

    2014-12-01

    This report is a summary of key Technology Deployment activities and achievements for 2014, including intellectual property, granted copyrights, royalties, license agreements, CRADAs, WFOs and Technology-Based Economic Development. Idaho National Laboratory (INL) is a Department of Energy (DOE) multi-program national laboratory that conducts research and development in all DOE mission areas. Like all other federal laboratories, INL has a statutory, technology transfer mission to make its capabilities and technologies available to all federal agencies, to state and local governments, and to universities and industry. To fulfill this mission, INL encourages its scientific, engineering, and technical staff to disclose new inventions and creations to ensure the resulting intellectual property is captured, protected, and made available to others who might benefit from it. As part of the mission, intellectual property is licensed to industrial partners for commercialization, creating jobs and delivering the benefits of federally funded technology to consumers. In other cases, unique capabilities are made available to other federal agencies or to regional small businesses to solve specific technical challenges. INL employees also work cooperatively with researchers and technical staff from the university and industrial sectors to further develop emerging technologies. In our multinational global economy, INL is contributing to the development of the next generation of engineers and scientists by licensing software to educational instiutitons throughout the world. This report is a catalog of selected INL technology transfer and commercialization transactions during this past year. The size and diversity of INL technical resources, coupled with the large number of relationships with other organizations, virtually ensures that a report of this nature will fail to capture all interactions. Recognizing this limitation, this report focuses on transactions that are specifically

  17. 2014 DOE Vehicle Technologies Office Annual Merit Review | Department of

    Energy Saver

    Energy 4 DOE Vehicle Technologies Office Annual Merit Review 2014 DOE Vehicle Technologies Office Annual Merit Review The 2014 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 16-20, 2014, in Washington, DC. The review encompassed all of the work done by the FCTO and the VTO: a total of 295 individual activities were reviewed for VTO, by a total of 179 reviewers. A

  18. Physics and Advanced Technologies 2001 Annual Report

    SciTech Connect

    Jacobs, R

    2002-05-09

    The Physics and Advanced Technologies (PAT) Directorate was created in July 2000 by Bruce Tarter, Director of Lawrence Livermore National Laboratory (LLNL). The Director called for the new organization to execute and support programs that apply cutting-edge physics and advanced technology to develop integrated solutions to problems in national security, fusion energy, information science, health care, and other national grand challenges. When I was appointed a year later as the PAT Directorate's first Associate Director, I initiated a strategic planning project to develop a vision, mission, and long-term goals for the Directorate. We adopted the goal of becoming a leader in frontier physics and technology for twenty-first-century national security missions: Stockpile Stewardship, homeland security, energy independence, and the exploration of space. Our mission is to: (1) Help ensure the scientific excellence and vitality of the major LLNL programs through its leadership role in performing basic and applied multidisciplinary research and development with programmatic impact, and by recruiting and retaining science and technology leaders; (2) Create future opportunities and directions for LLNL and its major programs by growing new program areas and cutting-edge capabilities that are synergistic with, and supportive of, its national security mission; (3) Provide a direct conduit to the academic and high-tech industrial sectors for LLNL and its national security programs, through which the Laboratory gains access to frontier science and technology, and can impact the science and technology communities; (4) Leverage unique Laboratory capabilities, to advance the state universe. This inaugural PAT Annual Report begins a series that will chronicle our progress towards fulfilling this mission. I believe the report demonstrates that the PAT Directorate has a strong base of capabilities and accomplishments on which to build in meeting its goals. Some of the highlights

  19. 2011 Fuel Cycle Technologies Annual Review Meeting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1 Fuel Cycle Technologies Annual Review Meeting 2011 Fuel Cycle Technologies Annual Review Meeting As the largest domestic source of low-carbon energy, nuclear power is making major contributions toward meeting our nation's current and future energy demands. The United States must continue to ensure improvements and access to this technology so we can meet our economic, environmental and energy security goals. We rely on nuclear energy because it provides a consistent, reliable and stable source

  20. Vehicle Technologies Office: 2014 Advanced Combustion Engine Annual

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Progress Report | Department of Energy Advanced Combustion Engine Annual Progress Report Vehicle Technologies Office: 2014 Advanced Combustion Engine Annual Progress Report The Advanced Combustion Engine research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing higher efficiency, very low

  1. Vehicle Technologies Office: 2015 Advanced Combustion Engine Annual

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Progress Report | Department of Energy Advanced Combustion Engine Annual Progress Report Vehicle Technologies Office: 2015 Advanced Combustion Engine Annual Progress Report The Advanced Combustion Engine research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing higher efficiency, very low

  2. Vehicle Technologies Office: 2015 Vehicle Systems Annual Progress Report |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Vehicle Systems Annual Progress Report Vehicle Technologies Office: 2015 Vehicle Systems Annual Progress Report The Vehicle Systems research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to advancing light-, medium-, and heavy-duty vehicle systems to help maximize the number of electric

  3. Annual Energy Outlook 2011 Reference Case

    Energy Information Administration (EIA) (indexed site)

    and Renewables Analysis Office of Energy Analysis WORKING GROUP PRESENTATION FOR ... History 2012 Source: EIA, Annual Energy Outlook 2013, (preliminary), Annual ...

  4. Technology Deployment Case Studies | Department of Energy

    Office of Environmental Management (EM)

    Deployment Technology Deployment Case Studies Technology Deployment Case Studies These case studies describe evaluations of energy-efficient technologies being used in federal...

  5. Annual Energy Outlook 2013 Early Release Reference Case

    Annual Energy Outlook

    Flex-Fuel Vehicle Modeling in the Annual Energy Outlook John Maples Office of Energy Consumption and Energy Analysis March 20, 2013 | Washington, DC Light duty vehicle technology ...

  6. Vehicle Technologies Office: 2015 Annual Merit Review Report | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Annual Merit Review Report Vehicle Technologies Office: 2015 Annual Merit Review Report The 2015 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 8-12, 2015, in Washington, DC. The review encompassed all of the work done by the FCTO and the VTO: 258 activities were reviewed for VTO, by a total of 170 reviewers. A total of 1,095 individual review responses

  7. Geothermal Technologies Office Releases 2012 Annual Report |...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    FACTSHEET: THIRD ANNUAL ARPA-E ENERGY INNOVATION SUMMIT NETL's 2015 Carbon Storage Atlas Shows Increase in U.S. CO2 Storage Potential Obama Officials Announce Steps to Promote...

  8. 2015 Annual Merit Review, Vehicle Technologies Office

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... The error bar calculation was changed from the 2011 Annual Merit Review report where the expectation of the sample error was the value calculated for the error bars. This change ...

  9. Vehicle Technologies Office: 2015 Electric Drive Technologies Annual R&D

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Progress Report | Department of Energy Electric Drive Technologies Annual R&D Progress Report Vehicle Technologies Office: 2015 Electric Drive Technologies Annual R&D Progress Report The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and

  10. Vehicle Technologies Office Publishes 2015 Annual Merit Review Report

    Energy.gov [DOE]

    The Department of Energy’s Vehicle Technologies Office (VTO) recently published its summary report from the 2015 Annual Merit Review (AMR) and Peer Evaluation Meeting held June 16-20.

  11. Sandia Energy - Sandia Participated in the 3rd Annual Technology...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    the 3rd Annual Technology Forum of the U.S.-China Clean Energy Research Center - Clean Vehicles Consortium (CERC-CVC) Home Renewable Energy Energy Transportation Energy Biofuels...

  12. 2012 DOE Vehicle Technologies Office Annual Merit Review | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The 2012 DOE Hydrogen Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting was held May 14-18, 2012 in Crystal City, Virginia. The review ...

  13. 2011 DOE Vehicle Technologies Office Annual Merit Review | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The 2011 DOE Hydrogen Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting was held May 9-13, 2011 in Crystal City, Virginia. The review ...

  14. 2015 Annual Merit Review, Vehicle Technologies Office

    Energy.gov [DOE] (indexed site)

    Along with work in individual technologies such as combustion engines, batteries, electric ... technologies within an overarching "vehicle systems perspective": Benchmarking is ...

  15. Annual Energy Outlook 2013 Early Release Reference Case

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    emission intensity index, 20051 Source: EIA, Annual Energy Outlook 2015 Reference case History Projections 2013 Carbon dioxide emissions per 2009 dollar GDP Energy use per 2009...

  16. Vehicle Technologies Office: 2010 Fuel Technologies R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy Fuel Technologies R&D Annual Progress Report Vehicle Technologies Office: 2010 Fuel Technologies R&D Annual Progress Report The Fuels Technologies subprogram supports fuels and lubricants research and development (R&D) to provide vehicle users with cost-competitive options that enable high fuel economy with low emissions, and contribute to petroleum displacement. 2010_fuels_technologies.pdf (11.05 MB) More Documents & Publications Vehicle

  17. Technology Deployment Case Studies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technology Deployment Case Studies Technology Deployment Case Studies Technology Deployment Case Studies Find efficient technologies and products for federal applications on the Federal Energy Management Program website. View All Maps Addthis

  18. 2015 Annual Merit Review, Vehicle Technologies Office

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Reaching VTO's goals will help the country meet the Renewable Fuel Standard's goals for use of biofuels in the Energy Policy Act of 2005 and the Energy Independence and Security Act of 2007. These goals require the use of as much as 36 billion gallons of renewable fuels annually by 2022. To reach these goals, VTO supports activities to:  Research fuels' effects on combustion: Improves understanding of how fuels from new sources can affect advanced combustion systems.  Research lubricants:

  19. 2015 Annual Merit Review, Vehicle Technologies Office

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Policy Act of 1992 VTO administers programs in support of the Energy Policy Act of 1992 (EPAct), which was passed to reduce our nation's reliance on foreign petroleum and improve air quality. Officially known as Public Law 102-486, EPAct includes provisions that address all aspects of energy supply and demand. EPAct's regulatory fleet programs require federal, state, and alternative fuel provider fleets to annually acquire a certain percentage of alternative fuel vehicles (AFVs), which are

  20. Waste Processing Annual Technology Development Report 2007 |...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    More Documents & Publications System Planning for Low-Activity Waste at Hanford Waste Treatment and Immobilation Plant HLW Waste Vitrification Facility Caustic Recovery Technology

  1. 2015 Annual Report - Geothermal Technologies Office (Program...

    Office of Scientific and Technical Information (OSTI)

    Research Org: EERE Publication and Product Library Sponsoring Org: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Office (EE-4G) (Geothermal ...

  2. International Technology Exchange Division: 1993 Annual report

    SciTech Connect

    Not Available

    1993-12-31

    The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES`s goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM`s policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM`s training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  3. Annual Report on Technology Transfer and Related Technology Partnering...

    Office of Environmental Management (EM)

    and over 700 patents issued in 2013. The high quality of the commercialization activities is recognized annually through the R&D 100 awards, with the DOE Facilities having ...

  4. Accelerator Technology Division annual report, FY 1989

    SciTech Connect

    Not Available

    1990-06-01

    This paper discusses: accelerator physics and special projects; experiments and injectors; magnetic optics and beam diagnostics; accelerator design and engineering; radio-frequency technology; accelerator theory and simulation; free-electron laser technology; accelerator controls and automation; and high power microwave sources and effects.

  5. Hazards Control Department annual technology review, 1987

    SciTech Connect

    Griffith, R.V.; Anderson, K.J.

    1988-07-01

    This document describes some of the research performed in the LLNL Hazards Control Department from October 1986 to September 1987. The sections in the Annual report cover scientific concerns in the areas of Health Physics, Industrial Hygiene, Industrial Safety, Aerosol Science, Resource Management, Dosimetry and Radiation Physics, Criticality Safety, and Fire Science. For a broader overview of the types of work performed in the Hazards Control Department, we have also compiled a selection of abstracts of recent publications by Hazards Control employees. Individual reports are processed separately for the data base.

  6. Geothermal Technologies Office Director Doug Hollett Keynotes at Annual

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technical Conference of the Geothermal Resources Council in September | Department of Energy Director Doug Hollett Keynotes at Annual Technical Conference of the Geothermal Resources Council in September Geothermal Technologies Office Director Doug Hollett Keynotes at Annual Technical Conference of the Geothermal Resources Council in September GTO Director Doug Hollett took the stage this week at the Geothermal Resources Council industry meeting in Portland, Oregon to address barriers to

  7. 2012 DOE Vehicle Technologies Program Annual Merit Review

    SciTech Connect

    2012-10-26

    The 2012 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting was held May 14-18, 2012 in Crystal City, Virginia. The review encompassed all of the work done by the Hydrogen Program and the Vehicle Technologies Program: a total of 309 individual activities were reviewed for Vehicle Technologies, by a total of 189 reviewers. A total of 1,473 individual review responses were received for the technical reviews.

  8. 2013 Geothermal Technologies Office Annual Report

    SciTech Connect

    none,

    2014-02-01

    For the Geothermal Technologies Office (GTO), 2013 was a year of major achievements and repositioning to introduce major initiatives. Read all about our progress and successes this year, and as we look ahead, our new opportunities and initiatives.

  9. 2015 Annual Merit Review, Vehicle Technologies Office

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    U.S. Department of Energy (DOE) Vehicle Technologies Office (VTO) focuses on reducing the cost, volume, and weight of batteries, while simultaneously improving the vehicle batteries' performance (power, energy, and durability) and ability to tolerate abuse conditions. Reaching the Office's goals in these areas and commercializing advanced energy storage technologies will allow more people to purchase and use electric drive vehicles. It will also help DOE meet the EV Everywhere Grand Challenge of

  10. 2015 Annual Merit Review, Vehicle Technologies Office

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    VTO funds research to advance electric drive technologies in two key areas:  Power electronics  Electric motors VTO funds research on electric drive technologies to:  Reduce cost, weight, and volume;  Improve performance, efficiency, and reliability;  Develop innovative modular and scalable designs; and  Improve manufacturability and accelerate commercialization. In addition, VTO is also supporting research on propulsion materials to lower adoption barriers for electric drive

  11. 2015 Annual Merit Review, Vehicle Technologies Office

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Number Principal Investigator, Organization. Project Title (Session) 2-200 Ahmad, Iftikhar; Lambda Technologies. Advanced Drying Process for Lower Manufacturing Cost of Electrodes (Electrochemical Energy Storage) 2-155 Ahmed, Shabbir; ANL. BatPaC Model Development (Electrochemical Energy Storage) 5-53 Ajayi, Oyelayo; ANL. Additive and Basefluid Development (Fuel and Lubricant Technologies) 1-37 Ajayi, Oyelayo; ANL. Development of High Power Density Driveline for Vehicles (Vehicle Systems) 2-209

  12. 2014 Annual Report, Geothermal Technologies Office

    SciTech Connect

    none,

    2015-03-01

    In 2014, the Geothermal Technologies Office (GTO) made significant gains—increased budgets, new projects, key technology successes, and new staff. The Fiscal Year (FY) 2015 budget is at $55 million—roughly a 20% increase over FY 2014, and a strong vote of confidence in what the sector is doing to advance economically competitive renewable energy. GTO also remains committed to a balanced portfolio, which includes new hydrothermal development, EGS, and targeted opportunities in the low-temperature sector.

  13. Water Science and Technology Board annual report 1987

    SciTech Connect

    Not Available

    1988-01-01

    In 1982, the National Research Council chose to recognize the importance of water resource issues by establishing the Water Science and Technology Board (WSTB). During the five years since its first meeting in November 1982, the WSTB has grown and matured. The WSTB has met 14 times to provide guidance and plan activities. Under the WSTB's direction, committees of experts have conducted approximately 30 studies on a broad array of topics, from dam safety to irrigation-induced water quality problems to ground water protection strategies. Studies have ranged in scope from the oversight of specific agency projects and programs to broader scientific reviews, such as a disciplinary assessment of the hydrologic sciences initiated in 1987. In all cases, studies have the general theme of ultimately improving the scientific and technological bases of programs of water management and environmental quality. This fifth annual report of the WSTB summarizes the Board's accomplishments during 1987, its current activities, and its plans for the future. The report also includes information on Board and committee memberships, program organizations, and the reports produced. The report should provide the reader with a basic understanding of the WSTB's interests, achievements, and capabilities. The WSTB welcomes inquiries and suggestions concerning its activities and will provide more detailed information on any aspects of its work to those interested.

  14. Chemical Technology Division. Annual technical report, 1995

    SciTech Connect

    Laidler, J.J.; Myles, K.M.; Green, D.W.; McPheeters, C.C.

    1996-06-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1995 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (3) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (4) processes for separating and recovering selected elements from waste streams, concentrating low-level radioactive waste streams with advanced evaporator technology, and producing {sup 99}Mo from low-enriched uranium; (5) electrometallurgical treatment of different types of spent nuclear fuel in storage at Department of Energy sites; and (6) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems.

  15. Biological and chemical technologies research. FY 1995 annual summary report

    SciTech Connect

    1996-03-01

    The annual summary report presents the fiscal year (FY) 1995 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program. This BCTR program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1995 (ASR 95) contains the following: program description (including BCTR program mission statement, historical background, relevance, goals and objectives); program structure and organization, selected technical and programmatic highlights for 1995; detailed descriptions of individual projects; a listing of program output, including a bibliography of published work; patents; and awards arising from work supported by the BCTR.

  16. Accelerator Technology Division annual report, FY 1991

    SciTech Connect

    Not Available

    1992-04-01

    This report discusses the following programs: The Ground Test Accelerator Program; APLE Free-Electron Laser Program; Accelerator Transmutation of Waste; JAERI, OMEGA Project, and Intense Neutron Source for Materials Testing; Advanced Free-Electron Laser Initiative; Superconducting Super Collider; The High-Power Microwave Program; {Phi} Factory Collaboration; Neutral Particle Beam Power System Highlights; Accelerator Physics and Special Projects; Magnetic Optics and Beam Diagnostics; Accelerator Design and Engineering; Radio-Frequency Technology; Free-Electron Laser Technology; Accelerator Controls and Automation; Very High-Power Microwave Sources and Effects; and GTA Installation, Commissioning, and Operations.

  17. Chemical Technology Division annual technical report, 1994

    SciTech Connect

    1995-06-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1994 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion; (3) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from waste streams, concentrating radioactive waste streams with advanced evaporator technology, and producing {sup 99}Mo from low-enriched uranium for medical applications; (6) electrometallurgical treatment of the many different types of spent nuclear fuel in storage at Department of Energy sites; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, and impurities in scrap copper and steel; and the geochemical processes involved in mineral/fluid interfaces and water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  18. Chemical Technology Division, Annual technical report, 1991

    SciTech Connect

    Not Available

    1992-03-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  19. Chemical Technology Division, Annual technical report, 1991

    SciTech Connect

    Not Available

    1992-03-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  20. Chemical Technology Division annual technical report 1989

    SciTech Connect

    Not Available

    1990-03-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1989 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including high-performance batteries (mainly lithium/iron sulfide and sodium/metal chloride), aqueous batteries (lead-acid and nickel/iron), and advanced fuel cells with molten carbonate and solid oxide electrolytes: (2) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste and for producing {sup 99}Mo from low-enriched uranium targets, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor (the Integral Fast Reactor), and waste management; and (5) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be administratively responsible for and the major user of the Analytical Chemistry Laboratory at Argonne National Laboratory (ANL).

  1. 1998 Chemical Technology Division Annual Technical Report.

    SciTech Connect

    Ackerman, J.P.; Einziger, R.E.; Gay, E.C.; Green, D.W.; Miller, J.F.

    1999-08-06

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1998 are presented.

  2. Chemical Technology Division annual technical report 1997

    SciTech Connect

    1998-06-01

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials and electrified interfaces. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division`s activities during 1997 are presented.

  3. 2015 Annual Merit Review, Vehicle Technologies Office

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer. The peer review process followed the guidelines of the Peer Review Guide developed by the Office of Energy Efficiency and Renewable Energy

  4. 2015 Annual Merit Review, Vehicle Technologies Office

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    In August 2009, the DOE announced the selection of 10 projects totaling $425 million for development, deployment, and validation of hybrid vehicles, and deployment of charging stations across the nation. American Reinvestment and Recovery Act (ARRA)-funded transportation electrification activities will aid in the deployment of technologies that help to reduce petroleum consumption. Activities include deployment of 18,000 public and private charging stations in major metropolitan areas across the

  5. Chemical Technology Division annual technical report, 1986

    SciTech Connect

    Not Available

    1987-06-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1986 are presented. In this period, CMT conducted research and development in areas that include the following: (1) high-performance batteries - mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants, the technology for fluidized-bed combustion, and a novel concept for CO/sub 2/ recovery from fossil fuel combustion; (5) methods for recovery of energy from municipal waste; (6) methods for the electromagnetic continuous casting of steel sheet; (7) techniques for treatment of hazardous waste such as reactive metals and trichloroethylenes; (8) nuclear technology related to waste management, a process for separating and recovering transuranic elements from nuclear waste, and the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor; and (9) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of catalytic hydrogenation and catalytic oxidation; materials chemistry for associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; the thermochemistry of zeolites and related silicates; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 127 refs., 71 figs., 8 tabs.

  6. Chemical technology division: Annual technical report 1987

    SciTech Connect

    Not Available

    1988-05-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1987 are presented. In this period, CMT conducted research and development in the following areas: (1) high-performance batteries--mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methods for the electromagnetic continuous casting of steel sheet and for the purification of ferrous scrap; (6) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (7) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and waste management; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for liquids and vapors at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; the thermochemistry of various minerals; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 54 figs., 9 tabs.

  7. Chemical Technology Division annual technical report, 1990

    SciTech Connect

    Not Available

    1991-05-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1990 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for coal- fired magnetohydrodynamics and fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for a high-level waste repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, concentrating plutonium solids in pyrochemical residues by aqueous biphase extraction, and treating natural and process waters contaminated by volatile organic compounds; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the scientific and engineering programs at Argonne National Laboratory (ANL). 66 refs., 69 figs., 6 tabs.

  8. Geothermal Technologies Program Annual Peer Review Presentation By Doug Hollett

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Geothermal Technologies Program Annual Peer Review May 7, 2012 Doug Hollett, Program Manager Geothermal Technologies Program Office of Energy Efficiency and Renewable Energy U.S. Department of Energy 2 Energy Efficiency & Renewable Energy eere.energy.gov Accelerate Near Term Hydrothermal Growth * Decrease exploration risks and costs. * Lower cost of electricity to 6 cents/kWh by 2020. * Development of 30 GWe of undiscovered resources. Secure the Future with Enhanced Geothermal Systems (EGS)

  9. DOE Solar Energy Technologies Program FY 2005 Annual Report

    SciTech Connect

    Not Available

    2006-03-01

    The DOE Solar Energy Technologies Program FY 2005 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2005. In particular, the report describes R&D performed by the Program?s national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  10. DOE Solar Energy Technologies Program FY 2006 Annual Report

    SciTech Connect

    Not Available

    2007-07-01

    The DOE Solar Energy Technologies Program FY 2006 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2005. In particular, the report describes R&D performed by the Program's national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  11. DOE Solar Energy Technologies Program 2007 Annual Report

    SciTech Connect

    Not Available

    2008-07-01

    The DOE Solar Energy Technologies Program FY 2007 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program from October 2006 to September 2007. In particular, the report describes R&D performed by the Program's national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  12. Welcome to the Geothermal Technologies Program 2012 Annual Peer Review

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Efficiency & Renewable Energy eere.energy.gov Program Name or Ancillary Text eere.energy.gov Glass Buttes, OR (DOE) Welcome to the Geothermal Technologies Program 2012 Annual Peer Review Ava Coy, Project Officer Geothermal Technologies Program Office of Energy Efficiency and Renewable Energy U.S. Department of Energy 2 Energy Efficiency & Renewable Energy eere.energy.gov Program Name or Ancillary Text eere.energy.gov Presentation Overview HT Tools, Drilling Systems, Zonal

  13. DOE Solar Energy Technologies Program: FY 2004 Annual Report

    SciTech Connect

    Not Available

    2005-10-01

    The DOE Solar Energy Technologies Program FY 2004 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2004. In particular, the report describes R&D performed by the Program's national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  14. 2009 DOE Vehicle Technologies Program Annual Merit Review

    SciTech Connect

    none,

    2009-10-01

    Annual Merit Review and Peer Evaluation Meeting to review the FY2008 accomplishments and FY2009 plans for the Vehicle Technologies Program, and provide an opportunity for industry, government, and academic to give inputs to DOE on the Program with a structured and formal methodology.

  15. DOE Solar Energy Technologies Program FY 2005 Annual Report

    SciTech Connect

    Sutula, Raymond A.

    2006-03-01

    The DOE Solar Energy Technologies Program FY 2005 Annual Report chronicles the R&D results of the program for fiscal year 2005. In particular, the report describes R&D performed by the Program’s national laboratories and university and industry partners.

  16. Clean Energy Technologies a Focus of Chemical Engineers' Annual Meeting

    Energy.gov [DOE]

    The role of clean energy technologies in building a strong economy and improving quality of life is just one of the wide-ranging topics that will be covered at the 2012 Annual Meeting of the American Institute of Chemical Engineers, to be held October 28 through November 2 at the David L. Lawrence Convention Center in Pittsburgh, Pa.

  17. Proceedings of the 22nd annual offshore technology conference

    SciTech Connect

    Not Available

    1990-01-01

    This book contains the proceedings of the 22nd annual offshore technology conference, Volume 3. Topics covered include: Innovation in concrete gravity platform substructures; the Ravensburn north platform and beyond; Development of the ROV - replaceable control valves; Structure-induced seafloor scour; Vessel impact design for steel jackets; and A new approach for finger storage slug catcher design.

  18. Proceedings of the 22nd annual offshore technology conference

    SciTech Connect

    Not Available

    1990-01-01

    This book contains the proceedings of the 22nd annual offshore technology conference, volume 4. Topics covered include: axial load capacity of steel piles in sand; hydrodynamic aspects of flexible riser; a deepwater test of subsea wirelining techniques; and soil reaction to axially loaded piles.

  19. Proceedings of the 22nd annual offshore technology conference

    SciTech Connect

    Not Available

    1990-01-01

    This book contains the proceeding of the 22 annual offshore technology conference, volume 1. Topics covered include: South China Sea extended well testing program: Implementation and results; API oil well cementing practices; Offshore grant fields, 1950 to 1990; Exploitation study and impact on the Korean formations; and South El Morgan Field, Gulf of Suez, Egypt.

  20. Chemical Technology Division annual technical report, 1992

    SciTech Connect

    Battles, J.E.; Myles, K.M.; Laidler, J.J.; Green, D.W.

    1993-06-01

    In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous waste, mixed hazardous/radioactive waste, and municipal solid waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, treating water contaminated with volatile organics, and concentrating radioactive waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (EFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials (corium; Fe-U-Zr, tritium in LiAlO{sub 2} in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel` ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, and molecular sieve structures; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  1. Vehicle Technologies Office: 2010 Fuel Technologies R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Fuels Technologies subprogram supports fuels and lubricants research and development (R&D) to provide vehicle users with cost-competitive options that enable high fuel economy ...

  2. Physics and Advanced Technologies 2003 Annual Report

    SciTech Connect

    Hazi, A; Sketchley, J

    2005-01-20

    The Physics and Advanced Technologies (PAT) Directorate overcame significant challenges in 2003 to deliver a wealth of scientific and programmatic milestones, and move toward closer alignment with programs at Lawrence Livermore National Laboratory. We acted aggressively in enabling the PAT Directorate to contribute to future, growing Lawrence Livermore missions in homeland security and at the National Ignition Facility (NIF). We made heavy investments to bring new capabilities to the Laboratory, to initiate collaborations with major Laboratory programs, and to align with future Laboratory directions. Consistent with our mission, we sought to ensure that Livermore programs have access to the best science and technology, today and tomorrow. For example, in a move aimed at revitalizing the Laboratory's expertise in nuclear and radiation detection, we brought the talented Measurement Sciences Group to Livermore from Lawrence Berkeley National Laboratory, after its mission there had diminished. The transfer to our I Division entailed significant investment by PAT in equipment and infrastructure required by the group. In addition, the move occurred at a time when homeland security funding was expected, but not yet available. By the end of the year, though, the group was making crucial contributions to the radiation detection program at Livermore, and nearly every member was fully engaged in programmatic activities. Our V Division made a move of a different sort, relocating en masse from Building 121 to the NIF complex. This move was designed to enhance interaction and collaboration among high-energy-density experimental scientists at the Laboratory, a goal that is essential to the effective use of NIF in the future. Since then, V Division has become increasingly integrated with NIF activities. Division scientists are heavily involved in diagnostic development and fielding and are poised to perform equation-of-state and high-temperature hohlraum experiments in 2004 as

  3. Chemical Technology Division annual technical report, 1993

    SciTech Connect

    Battles, J.E.; Myles, K.M.; Laidler, J.J.; Green, D.W.

    1994-04-01

    Chemical Technology (CMT) Division this period, conducted research and development in the following areas: advanced batteries and fuel cells; fluidized-bed combustion and coal-fired magnetohydrodynamics; treatment of hazardous waste and mixed hazardous/radioactive waste; reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; separating and recovering transuranic elements, concentrating radioactive waste streams with advanced evaporators, and producing {sup 99}Mo from low-enriched uranium; recovering actinide from IFR core and blanket fuel in removing fission products from recycled fuel, and disposing removal of actinides in spent fuel from commercial water-cooled nuclear reactors; and physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, thin-film diamond surfaces, effluents from wood combustion, and molten silicates; and the geochemical processes involved in water-rock interactions. The Analytical Chemistry Laboratory in CMT also provides a broad range of analytical chemistry support.

  4. Water Science and Technology Board annual report 1988

    SciTech Connect

    Not Available

    1989-01-01

    This annual report of the Water Science and Technology Board (WSTB) summarizes the activities of the Board and its subgroups during 1988, its sixth year of existence. Included are descriptions of current and recently completed projects, new activities scheduled to begin in 1989, and plans for the future. The report also includes information on Board and committee memberships, program operational features, and reports produced during the past several years. This annual report is intended to provide an introduction to the WSTB and summary of its program for the year.

  5. BCTR: Biological and Chemical Technologies Research 1994 annual summary report

    SciTech Connect

    Petersen, G.

    1995-02-01

    The annual summary report presents the fiscal year (FY) 1994 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). Although the OIT was reorganized in 1991 and AICD no longer exists, this document reports on efforts conducted under the former structure. The annual summary report for 1994 (ASR 94) contains the following: program description (including BCTR program mission statement, historical background, relevance, goals and objectives); program structure and organization, selected technical and programmatic highlights for 1994; detailed descriptions of individual projects; a listing of program output, including a bibliography of published work; patents, and awards arising from work supported by BCTR.

  6. Vehicle Technologies Office: 2008 Propulsion Materials R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy 8 Propulsion Materials R&D Annual Progress Report Vehicle Technologies Office: 2008 Propulsion Materials R&D Annual Progress Report 2008_propulsion_materials.pdf (16.36 MB) More Documents & Publications Vehicle Technologies Office: 2010 Propulsion Materials R&D Annual Progress Report Vehicle Technologies Office: 2013 Propulsion Materials R&D Annual Progress Report Vehicle Technologies Office: 2009 Propulsion Materials

  7. Vehicle Technologies Office: 2010 Advanced Combustion R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy 10 Advanced Combustion R&D Annual Progress Report Vehicle Technologies Office: 2010 Advanced Combustion R&D Annual Progress Report 2010_adv_combustion_engine.pdf (16.62 MB) More Documents & Publications Vehicle Technologies Office: 2009 Advanced Combustion R&D Annual Progress Report Vehicle Technologies Office: 2011 Advanced Combustion R&D Annual Progress Report Vehicle Technologies Office: 2008 Advanced Combustion

  8. Hydrogen, Fuel Cells and Infrastructure Technologies Program: 2002 Annual Progress Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Department of Energy’s Hydrogen, Fuel Cells and Infrastructure Technologies program’s 2002 annual progress report.

  9. INL Control System Situational Awareness Technology Annual Report 2012

    SciTech Connect

    Gordon Rueff; Bryce Wheeler; Todd Vollmer; Tim McJunkin; Robert Erbes

    2012-10-01

    The overall goal of this project is to develop an interoperable set of tools to provide a comprehensive, consistent implementation of cyber security and overall situational awareness of control and sensor network implementations. The operation and interoperability of these tools will fill voids in current technological offerings and address issues that remain an impediment to the security of control systems. This report provides an FY 2012 update on the Sophia, Mesh Mapper, Intelligent Cyber Sensor, and Data Fusion projects with respect to the year-two tasks and annual reporting requirements of the INL Control System Situational Awareness Technology report (July 2010).

  10. Algorithm for Accounting for the Interactions of Multiple Renewable Energy Technologies in Estimation of Annual Performance

    Energy Science and Technology Software Center

    2007-12-31

    The algorithm accounts for interactions between technologies in determining the annual energy performance of multiple renewable energy technologies at a subject site.

  11. Vehicle Technologies Office: 2008 Energy Storage R&D Annual Progress Report

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Energy Storage R&D Annual Progress Report Vehicle Technologies Office: 2008 Energy Storage R&D Annual Progress Report 2008_energy_storage.pdf (6.21 MB) More Documents & Publications FY 2012 Annual Progress Report for Energy Storage R&D Vehicle Technologies Office: 2010 Energy Storage R&D Annual Progress Report FY 2011 Annual Progress Report for Energy Storage R&D

  12. Vehicle Technologies Office: 2009 Energy Storage R&D Annual Progress Report

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Energy Storage R&D Annual Progress Report Vehicle Technologies Office: 2009 Energy Storage R&D Annual Progress Report 2009_energy_storage.pdf (12.34 MB) More Documents & Publications FY 2011 Annual Progress Report for Energy Storage R&D FY 2012 Annual Progress Report for Energy Storage R&D Vehicle Technologies Office: 2010 Energy Storage R&D Annual Progress Report

  13. Vehicle Technologies Office: 2008 Advanced Combustion R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy Combustion R&D Annual Progress Report Vehicle Technologies Office: 2008 Advanced Combustion R&D Annual Progress Report 2008_adv_combustion_engine.pdf (13.18 MB) More Documents & Publications Ignition Control for HCCI Vehicle Technologies Office: 2010 Advanced Combustion R&D Annual Progress Report Vehicle Technologies Office: 2009 Advanced Combustion R&D Annual Progress Report

  14. Vehicle Technologies Office: 2011 Advanced Combustion R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy Combustion R&D Annual Progress Report Vehicle Technologies Office: 2011 Advanced Combustion R&D Annual Progress Report Annual report on the work of the the Advanced Combustion Engine R&D subprogram that focuses on developing advanced ICE technologies for all highway transportation vehicles. 2011_adv_combustion_engine.pdf (16.85 MB) More Documents & Publications Vehicle Technologies Office: 2009 Advanced Combustion R&D Annual Progress Report

  15. Second annual clean coal technology conference: Proceedings. Volume 1

    SciTech Connect

    Not Available

    1993-09-09

    The Second Annual Clean Coal Technology Conference was held at Atlanta, Georgia, September 7--9, 1993. The Conference, cosponsored by the US Department of Energy (USDOE) and the Southern States Energy Board (SSEB), seeks to examine the status and role of the Clean Coal Technology Demonstration Program (CCTDP) and its projects. The Program is reviewed within the larger context of environmental needs, sustained economic growth, world markets, user performance requirements and supplier commercialization activities. This will be accomplished through in-depth review and discussion of factors affecting domestic and international markets for clean coal technology, the environmental considerations in commercial deployment, the current status of projects, and the timing and effectiveness of transfer of data from these projects to potential users, suppliers, financing entities, regulators, the interested environmental community and the public. Individual papers have been entered separately.

  16. 2014 DOE Vehicle Technologies Office Annual Merit Review

    SciTech Connect

    2014-11-01

    The 2014 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 16-20, 2014, in Washington, DC. The review encompassed all of the work done by the FCTO and the VTO: a total of 295 individual activities were reviewed for VTO, by a total of 179 reviewers. A total of 1,354 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  17. 2015 DOE Vehicle Technologies Office Annual Merit Review

    SciTech Connect

    None, None

    2015-11-01

    The 2015 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 8-12, 2015, in Arlington, Virginia. The review encompassed all of the work done by the FCTO and the VTO: 258 individual activities were reviewed for VTO, by 170 reviewers. A total of 1,095 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  18. 2013 DOE Vehicle Technologies Office Annual Merit Review

    SciTech Connect

    none,

    2013-10-01

    The 2013 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held May 13-17, 2013, in Crystal City, Virginia. The review encompassed all of the work done by the FCTO and the VTO: a total of 287 individual activities were reviewed for VTO, by a total of 187 reviewers. A total of 1,382 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  19. Compressed air energy storage technology program. Annual report for 1980

    SciTech Connect

    Kannberg, L.D.

    1981-06-01

    All of the major research funded under the Compressed Air Energy Storage Technology Program during the period March 1980 to March 1981 is described. This annual report is divided into two segments: Reservoir Stability Studies and Second-Generation Concepts Studies. The first represents research performed to establish stability criteria for CAES reservoirs while the second reports progress on research performed on second-generation CAES concepts. The report consists of project reports authored by research engineers and scientists from PNL and numerous subcontractors including universities, architect-engineering, and other private firms.

  20. Vehicle Technologies Office: 2015 Energy Storage R&D Annual Report...

    Office of Environmental Management (EM)

    Energy Storage R&D Annual Report Vehicle Technologies Office: 2015 Energy Storage R&D Annual Report The Energy Storage research and development (R&D) subprogram within the DOE ...

  1. Vehicle Technologies Office: 2014 Energy Storage R&D Annual Report...

    Energy Saver

    Energy Storage R&D Annual Report Vehicle Technologies Office: 2014 Energy Storage R&D Annual Report The Energy Storage research and development (R&D) subprogram within the DOE ...

  2. Vehicle Technologies Office: 2008 Energy Storage R&D Annual Progress...

    Energy Saver

    Energy Storage R&D Annual Progress Report Vehicle Technologies Office: 2008 Energy Storage R&D Annual Progress Report 2008energystorage.pdf (6.21 MB) More Documents & ...

  3. Vehicle Technologies Office: 2009 Energy Storage R&D Annual Progress...

    Energy Saver

    Energy Storage R&D Annual Progress Report Vehicle Technologies Office: 2009 Energy Storage R&D Annual Progress Report 2009energystorage.pdf (12.34 MB) More Documents & ...

  4. Vehicle Technologies Office: 2010 Energy Storage R&D Annual Progress...

    Energy Saver

    Energy Storage R&D Annual Progress Report Vehicle Technologies Office: 2010 Energy Storage R&D Annual Progress Report The energy storage research and development effort within the ...

  5. Fuel Cell Technologies Program Overview: 2010 Annual Merit Review and Peer

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Evaluation Meeting | Department of Energy 0 Annual Merit Review and Peer Evaluation Meeting Fuel Cell Technologies Program Overview: 2010 Annual Merit Review and Peer Evaluation Meeting Presentation by Richard Farmer at the 2010 Annual Merit Review and Peer Evaluation Meeting. Fuel Cell Technologies Program Overview (2.35 MB) More Documents & Publications Fuel Cell Technologies Program Overview DOE Hydrogen and Fuel Cells Program Record 11007: Hydrogen Threshold Cost Calculation Hydrogen

  6. Vehicle Technologies Office Merit Review 2016: Annual Merit Review and Peer

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Evaluation Meeting | Department of Energy Annual Merit Review and Peer Evaluation Meeting Vehicle Technologies Office Merit Review 2016: Annual Merit Review and Peer Evaluation Meeting Presentation given by Department of Energy (DOE) at the 2016 DOE Vehicle Technologies Office and Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting about Plenary Presentation vto000_cooper_2016_o_web.pdf (5.01 MB) More Documents & Publications Vehicle Technologies Office FY

  7. 2009 DOE Vehicle Technologies Office Annual Merit Review | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies 7. Materials Technologies: Propulsion Materials 8. Educational Activities and Technology Integration Activities 9. Technology Validation 10. Safety, Codes, and ...

  8. Building America Technology Solutions Case Study: Combustion...

    Energy Saver

    Combustion Safety Simplified Test Protocol Building America Technology Solutions Case Study: Combustion Safety Simplified Test Protocol Two U.S. Department of Energy Building ...

  9. Building America Technology Solutions Case Study: Evaluation...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Evaluation of Passive Vents in New-Construction Multifamily Buildings Building America Technology Solutions Case Study: Evaluation of Passive Vents in New-Construction Multifamily ...

  10. Advanced Automotive Technologies annual report to Congress, fiscal year 1996

    SciTech Connect

    1998-03-01

    This annual report serves to inform the United States Congress on the progress for fiscal year 1996 of programs under the Department of Energy`s Office of Advanced Automotive Technologies (OAAT). This document complies with the legislative requirement to report on the implementation of Title III of the Automotive Propulsion Research and Development Act of 1978. Also reported are related activities performed under subsequent relevant legislation without specific reporting requirements. Furthermore, this report serves as a vital means of communication from the Department to all public and private sector participants. Specific requirements that are addressed in this report are: Discussion of how each research and development contract, grant, or project funded under the authority of this Act satisfies the requirements of each subsection; Current comprehensive program definition for implementing Title III; Evaluation of the state of automotive propulsion system research and development in the United States; Number and amount of contracts and grants awarded under Title III; Analysis of the progress made in developing advanced automotive propulsion system technology; and Suggestions for improvements in automotive propulsion system research and development, including recommendations for legislation.

  11. 2014 Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting

    Energy.gov [DOE]

    At the 2014 Department of Energy Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting, advanced vehicle technologies projects funded by DOE are presented and reviewed for their merit.

  12. The Energy Department's Geothermal Technologies Office Releases 2013 Annual Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    The 2013 Annual Report: featuring highlights and accomplishments in the Office's portfolio of projects is now available!

  13. Heavy oil reservoirs recoverable by thermal technology. Annual report

    SciTech Connect

    Kujawa, P.

    1981-02-01

    This volume contains reservoir, production, and project data for target reservoirs which contain heavy oil in the 8 to 25/sup 0/ API gravity range and are susceptible to recovery by in situ combustion and steam drive. The reservoirs for steam recovery are less than 2500 feet deep to comply with state-of-the-art technology. In cases where one reservoir would be a target for in situ combustion or steam drive, that reservoir is reported in both sections. Data were collectd from three source types: hands-on (A), once-removed (B), and twice-removed (C). In all cases, data were sought depicting and characterizing individual reservoirs as opposed to data covering an entire field with more than one producing interval or reservoir. The data sources are listed at the end of each case. This volume also contains a complete listing of operators and projects, as well as a bibliography of source material.

  14. Vehicle Technologies Office: 2013 Advanced Combustion R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy 3 Advanced Combustion R&D Annual Progress Report Vehicle Technologies Office: 2013 Advanced Combustion R&D Annual Progress Report This report describes the progress made on the research and development projects funded by the Advanced Combustion subprogram in the Vehicle Technologies Office. Past year's reports are listed on the Annual Progress Reports page. fy13advancedcombustionprogressreport.pdf (49.64 MB) More Documents & Publications Vehicle

  15. Vehicle Technologies Office: 2010 Propulsion Materials R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy Propulsion Materials R&D Annual Progress Report Vehicle Technologies Office: 2010 Propulsion Materials R&D Annual Progress Report 2010 annual progress report focusing on enabling and innovative materials technologies that are critical in improving the efficiency of advanced engines by providing enabling materials support for combustion, hybrid, and power electronics development. 2010_propulsion_materials.pdf (21.92 MB) More Documents & Publications

  16. Vehicle Technologies Office: 2011 Propulsion Materials R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy Propulsion Materials R&D Annual Progress Report Vehicle Technologies Office: 2011 Propulsion Materials R&D Annual Progress Report 2011 annual progress report focusing on enabling and innovative materials technologies that are critical in improving the efficiency of advanced engines by providing enabling materials support for combustion, hybrid, and power electronics development. 2011_propulsion_materials.pdf (21.95 MB) More Documents & Publications

  17. Vehicle Technologies Office: 2012 Advanced Combustion R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy Combustion R&D Annual Progress Report Vehicle Technologies Office: 2012 Advanced Combustion R&D Annual Progress Report Annual report on the work of the the Advanced Combustion Engine R&D subprogram. The Advanced Combustion Engine R&D subprogram supports the Vehicle Technologies Office mission by removing the critical technical barriers to commercialization of advanced internal combustion engines (ICEs) for passenger and commercial vehicles that

  18. Vehicle Technologies Office: 2012 Propulsion Materials R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy Propulsion Materials R&D Annual Progress Report Vehicle Technologies Office: 2012 Propulsion Materials R&D Annual Progress Report 2012 annual progress report focusing on enabling and innovative materials technologies that are critical in improving the efficiency of advanced engines by providing enabling materials support for combustion, hybrid, and power electronics development. 2012_propulsion_materials.pdf (22.34 MB) More Documents & Publications

  19. Vehicle Technologies Office: 2013 Propulsion Materials R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy Propulsion Materials R&D Annual Progress Report Vehicle Technologies Office: 2013 Propulsion Materials R&D Annual Progress Report This report describes the progress made during 2013 on the research and development projects funded by the Propulsion Materials subprogram in the Vehicle Technologies Office. Past year's reports are listed on the Annual Progress Reports page. 2013_Progress_Report_for_Propulsion_Materials.pdf (10.88 MB) More Documents &

  20. Vehicle Technologies Office: 2009 Propulsion Materials R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy 09 Propulsion Materials R&D Annual Progress Report Vehicle Technologies Office: 2009 Propulsion Materials R&D Annual Progress Report 2009_propulsion_materials.pdf (20.14 MB) More Documents & Publications Magnetic Material for PM Motors Permanent Magnet Development for Automotive Traction Motors Vehicle Technologies Office: 2011 Propulsion Materials

  1. 2010 DOE Hydrogen Program and Vehicle Technologies Office Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Annual Merit Review and Peer Evaluation Meeting 2010 DOE ... DOE PHEV Battery Cost Assessment Barnett TIAX LLC A ... Plug&Play Software Architecture Rousseau ANL Tradeoff ...

  2. Vehicle Technologies Office: 2014 Lightweight Materials R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy Lightweight Materials R&D Annual Progress Report Vehicle Technologies Office: 2014 Lightweight Materials R&D Annual Progress Report The Lightweight Materials research and development (R&D) area within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing lightweight materials for passenger and

  3. Summary of the FY 2005 Batteries for Advanced Transportation Technologies (BATT) Research Program Annual Review

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    the FY 2005 Batteries for Advanced Transportation Technologies (BATT) Research Program Annual Review May 31-June 2, 2005 Berkeley, CA August 2005 U.S. Department of Energy Office of FreedomCAR and Vehicle Technologies August 8, 2005 Dear Colleague: This document presents a summary of the evaluation and comments provided by the review panel for the FY 2005 Department of Energy (DOE) Batteries for Advanced Transportation Technologies (BATT) program annual review. The review was held at the

  4. Vehicle Technologies Office: 2012 Lightweight Materials R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy Lightweight Materials R&D Annual Progress Report Vehicle Technologies Office: 2012 Lightweight Materials R&D Annual Progress Report As part of the U.S. Department of Energys (DOEs) Vehicle Technologies Office (VTO), the Lightweight Materials activity (LM) focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce light and heavy duty vehicle weight without compromising other attributes such

  5. Vehicle Technologies Office: 2013 Lightweight Materials R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy Lightweight Materials R&D Annual Progress Report Vehicle Technologies Office: 2013 Lightweight Materials R&D Annual Progress Report As part of the U.S. Department of Energy's (DOE's) Vehicle Technologies Program (VTO), the Lightweight Materials (LM) activity focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce light and heavy duty vehicle weight without compromising other attributes such

  6. Senator Dorgan and Under Secretary Orr to Deliver Remarks at 2015 Fuel Cell Technologies and Vehicle Technologies Annual Merit Review

    Energy.gov [DOE]

    The U.S. Department of Energy’s Fuel Cell Technologies Office and the Vehicle Technologies Office announce that Senator Byron L. Dorgan (ret.) and DOE’s Under Secretary for Science and Energy Franklin Orr will deliver remarks at the 2015 Hydrogen and Fuel Cell Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting on Monday, June 8.

  7. DIGITAL TECHNOLOGY BUSINESS CASE METHODOLOGY GUIDE & WORKBOOK

    SciTech Connect

    Thomas, Ken; Lawrie, Sean; Hart, Adam; Vlahoplus, Chris

    2014-09-01

    Performance advantages of the new digital technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such that it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. This Business Case Methodology approaches building a business case for a particular technology or suite of technologies by detailing how they impact an operator in one or more of the three following areas: Labor Costs, Non-Labor Costs, and Key Performance Indicators (KPIs). Key to those impacts will be identifying where the savings are harvestable, meaning they result in an actual reduction in headcount and/or cost. The report consists of a Digital Technology Business Case Methodology Guide and an accompanying spreadsheet workbook that will enable the user to develop a business case.

  8. 2008 Annual Progress Report - Advanced Vehicle Technology Analysis and Evaluation Activities and Heavy Vehicle Systems Optimization Program

    SciTech Connect

    none,

    2009-02-24

    Annual Progress Report for fiscal year 2008 for the Advanced Vehicle Technology Analysis and Evaluation (AVTAE) team activities

  9. FY2009 Annual Progress Report for Advanced Vehicle Technology Analysis and Evaluation Activities and Heavy Vehicle Systems Optimization Program

    SciTech Connect

    none,

    2010-02-19

    Annual Progress Report for fiscal year 2009 for the Advanced Vehicle Technology Analysis and Evaluation (AVTAE) team activities

  10. Vehicle Technologies Office: 2009 Advanced Power Electronics R&D Annual

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Progress Report | Department of Energy Power Electronics R&D Annual Progress Report Vehicle Technologies Office: 2009 Advanced Power Electronics R&D Annual Progress Report Annual report focusing on understanding and improving the way various new components of tomorrow's automobiles will function as a unified system to improve fuel efficiency. 2009_apeem_report.pdf (10.35 MB) More Documents & Publications Thermal Performance and Reliability of Bonded Interfaces Vehicle

  11. Vehicle Technologies Office Recognizes Individuals and Teams with Extraordinary Results at 2016 Annual Merit Review

    Office of Energy Efficiency and Renewable Energy (EERE)

    At this year’s Annual Merit Review in Washington, DC, the Department of Energy’s (DOE) Vehicle Technologies Office recognized some of its most outstanding partners involved in research, development, and deployment of sustainable transportation technologies. The Vehicle Technologies Office bestowed Distinguished Achievement and Lifetime Distinguished Achievement awards for teams and individuals that have contributed to projects and programs with extraordinary results.

  12. Impacts of Unconventional Gas Technology in the Annual Energy Outlook 2000

    Reports and Publications

    2000-01-01

    This paper describes the methodology used in the National Energy Modeling System (NEMS) to represent unconventional gas technologies and their impacts on projections in the Annual Energy Outlook 2000 (AEO2000).

  13. Impact of Unconventional Gas Technology in the Annual Energy Outlook 2000

    Reports and Publications

    2000-01-01

    This paper describes the methodology used in the National Energy Modeling System (NEMS) to represent unconventional gas technologies and their impacts on projections in the Annual Energy Outlook 2000 (AEO2000).

  14. Summary of the FY 2005 Batteries for Advanced Transportation Technologies (BATT) research program annual review

    SciTech Connect

    None, None

    2005-08-01

    This document presents a summary of the evaluation and comments provided by the review panel for the FY 2005 Department of Energy (DOE) Batteries for Advanced Transportation Technologies (BATT) program annual review.

  15. 2013 Annual Planning Summary for the National Energy Technology Laboratory

    Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2013 and 2014 within the National Energy Technology Laboratory. The National Energy Technology Laboratory...

  16. FY2015 Electric Drive Technologies Annual Progress Report (Technical...

    Office of Scientific and Technical Information (OSTI)

    The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge ...

  17. Vehicle Technologies Office: 2014 Energy Storage R&D Annual Report |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Energy Storage R&D Annual Report Vehicle Technologies Office: 2014 Energy Storage R&D Annual Report The Energy Storage research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for projects focusing on batteries for plug-in electric vehicles. Program targets focus on overcoming technical barriers to enable market success including: (1) significantly reducing battery cost, (2) increasing battery

  18. Vehicle Technologies Office: 2009 Advanced Combustion R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy 9 Advanced Combustion R&D Annual Progress Report Vehicle Technologies Office: 2009 Advanced Combustion R&D Annual Progress Report The Advanced Combustion Engine R&D subprogram supports the VTP Program by removing the technical barriers to commercialization of ICEs for paaenger and commercial vehicles that meet future Federal emissions regulations. 2009_adv_combustion_engine.pdf (10.14 MB) More Documents & Publications Vehicle Technologies Office:

  19. Vehicle Technologies Office: 2010 Energy Storage R&D Annual Progress Report

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Energy Storage R&D Annual Progress Report Vehicle Technologies Office: 2010 Energy Storage R&D Annual Progress Report The energy storage research and development effort within the Vehicle Technologies Office (VTO) is responsible for researching and improving advanced batteries and ultracapacitors for a wide range of vehicleapplications, including HEVs, PHEVs, EVs, and fuel cell vehicles (FCVs). 2010_energy_storage.pdf (33.36 MB) More Documents &

  20. Vehicle Technologies Office: 2010 Lightweight Materials R&D Annual Progress

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report | Department of Energy Lightweight Materials R&D Annual Progress Report Vehicle Technologies Office: 2010 Lightweight Materials R&D Annual Progress Report The Lightweight Materials activity (LM) focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce light and heavy duty vehicle weight without compromising other attributes such as safety, performance,recyclability, and cost. 2010_lightweighting_materials.pdf (9.04

  1. Vehicle Technologies Office: 2015 Energy Storage R&D Annual Report |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Energy Storage R&D Annual Report Vehicle Technologies Office: 2015 Energy Storage R&D Annual Report The Energy Storage research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for projects focusing on batteries for plug-in electric vehicles. Program targets focus on overcoming technical barriers to enable market success including: (1) significantly reducing battery cost, (2) increasing battery

  2. FY13 Annual Progress Report for SECA Core Technology Program

    SciTech Connect

    Stevenson, Jeffry W.; Koeppel, Brian J.

    2014-01-31

    components • Thermo-mechanical modeling and validation experiments were performed to understand/mitigate degradation of interconnects and seals during long-term stack operation. Electrochemical modeling 4 • Modeling tools were developed to improve understanding of electrochemical performance degradation of SOFCs related to changes in electrode microstructure and chemical interactions with contaminants. During FY13, PNNL continued to work with NETL to increase the extent of interaction between the SECA Core Technology Program and the SECA Industry Teams. In addition to using established mechanisms of communication, such as the annual SECA Workshop, representatives from PNNL and NETL participated in telecons and/or face-to-face meetings with all three industry teams during FY13. During these meetings, PNNL’s Core Technology Program work was presented in detail, after which feedback was solicited regarding current and future research topics. Results of PNNL’s SECA CTP work were also distributed via topical reports for the industry teams, DOE reports, technical society presentations, and papers in peer-reviewed technical journals. 5

  3. Volunteers Leading Technology, A Case Study: Chewonki Renewable...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project This presentation ...

  4. Technology Solutions for New Homes Case Study: Southern Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technology Solutions for New Homes Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home Technology Solutions for New Homes Case Study: Southern Energy ...

  5. 2012 Annual Planning Summary for EM Energy Technology Engineering Center

    Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2012 and 2013 within EM Energy Technology Engineering Center.

  6. 2013 Annual Planning Summary for the Energy Technology Engineering Center

    Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2013 and 2014 within the Energy Technology Engineering Center.

  7. Boise Inc. St. Helens Paper Mill Achieves Significant Fuel Savings; Industrial Technologies Program (ITP) Save Energy Now (SEN) Case Study

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Boise Inc. St. Helens mill produces nearly 1,000 tons of pulp and specialty paper per day, including a wide variety of light-to-heavy paper and napkin grade tissues. Boise Inc. St. Helens Paper Mill Achieves Significant Fuel Savings Annual Energy Savings Exceed $1 Million Industrial Technologies Program Case Study Benefits * Achieved annual energy cost savings of more than $1 million * Achieved annual fuel savings of approximately 154,000 MMBtu * Revealed innovative method to save energy *

  8. Heavy oil reservoirs recoverable by thermal technology. Annual report

    SciTech Connect

    Kujawa, P.

    1981-02-01

    The purpose of this study was to compile data on reservoirs that contain heavy oil in the 8 to 25/sup 0/ API gravity range, contain at least ten million barrels of oil currently in place, and are non-carbonate in lithology. The reservoirs within these constraints were then analyzed in light of applicable recovery technology, either steam-drive or in situ combustion, and then ranked hierarchically as candidate reservoirs. The study is presented in three volumes. Volume I presents the project background and approach, the screening analysis, ranking criteria, and listing of candidate reservoirs. The economic and environmental aspects of heavy oil recovery are included in appendices to this volume. This study provides an extensive basis for heavy oil development, but should be extended to include carbonate reservoirs and tar sands. It is imperative to look at heavy oil reservoirs and projects on an individual basis; it was discovered that operators, and industrial and government analysts will lump heavy oil reservoirs as poor producers, however, it was found that upon detailed analysis, a large number, so categorized, were producing very well. A study also should be conducted on abandoned reservoirs. To utilize heavy oil, refiners will have to add various unit operations to their processes, such as hydrotreaters and hydrodesulfurizers and will require, in most cases, a lighter blending stock. A big problem in producing heavy oil is that of regulation; specifically, it was found that the regulatory constraints are so fluid and changing that one cannot settle on a favorable recovery and production plan with enough confidence in the regulatory requirements to commit capital to the project.

  9. Fuel Cycle Technologies Annual Review Meeting Transactions Report

    SciTech Connect

    Lori Braase; W. Edgar May

    2014-11-01

    The Fuel Cycle Technologies (FCT) program supports the Department of Energys (DOEs) mission to: Enhance U.S. security and economic growth through transformative science, technology innovation, and market solutions to meet our energy, nuclear security, and environmental challenges. Goal 1 of DOEs Strategic Plan is to innovate energy technologies that enhance U.S. economic growth and job creation, energy security, and environmental quality. FCT does this by investing in advanced technologies that could transform the nuclear fuel cycle in the decades to come. Goal 2 of DOEs Strategic Plan is to strengthen national security by strengthening key science, technology, and engineering capabilities. FCT does this by working closely with the National Nuclear Security Administration and the U.S Department of State to develop advanced technologies that support the Nations nuclear nonproliferation goals.

  10. Fuel Cell Technologies Program Overview: 2010 Annual Merit Review...

    Energy.gov [DOE] (indexed site)

    Fuel Cell Technologies Program Overview (2.35 MB) More Documents & Publications Fuel Cell ... Program Record 11007: Hydrogen Threshold Cost Calculation Hydrogen Threshold Cost ...

  11. Vehicle Technologies Office: 2010 Propulsion Materials R&D Annual...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    technologies that are critical in improving the efficiency of advanced engines by providing enabling materials support for combustion, hybrid, and power electronics development. ...

  12. 2013 Annual Merit Review Results Report - Technology Integration...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Review Results Report - Technology Integration EV Community Readiness projects: New York City and Lower Hudson Valley Clean Communities, Inc. (NY, MA, PA); NYSERDA (ME, NH, VT,...

  13. 2011 Annual Planning Summary for National Energy Technology Laboratory (NETL)

    Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2011 and 2012 within the National Energy Technology Laboratory (See Fossil Energy).

  14. 2016 Annual Technology Baseline (ATB) (Conference) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    The ATB includes the following electricity generation technologies: land-based wind; offshore wind; utility-scale solar PV; concentrating solar power; geothermal power; hydropower ...

  15. FY2014 Electric Drive Technologies Annual Progress Report

    SciTech Connect

    2014-12-01

    The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce system cost and improve their efficiency in transforming battery energy to useful work. The R&D is also aimed at better understanding and improving how various components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

  16. HARBEC's $52,000 Annual Energy Savings under SEP Described in New Case

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Study | Department of Energy Technical Assistance » Superior Energy Performance » HARBEC's $52,000 Annual Energy Savings under SEP Described in New Case Study HARBEC's $52,000 Annual Energy Savings under SEP Described in New Case Study September 18, 2014 - 4:40pm Addthis Photo of HARBEC, Inc.'s specialty plastics manufacturing facility in upstate New York, courtesy of HARBEC. A new case study details how HARBEC, Inc. improved the energy performance of its specialty plastics manufacturing

  17. 2012 Fuel Cycle Technologies Annual Review Meeting Transaction Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    The United States must continue to ensure improvements and access to this technology so we can meet our economic, environmental and energy security goals. We rely on nuclear energy because it...

  18. 2008 DOE Vehicle Technologies Office Annual Merit Review | Department of

    Energy Saver

    7 Fuel Cell Technologies Market Report 2007 Fuel Cell Technologies Market Report The fuel cell industry, which has experienced continued increases in sales, is an emerging clean energy industry with the potential for significant growth in the stationary, portable, and transportation sectors. Fuel cells produce electricity in a highly efficient electrochemical process from a variety of fuels with low to zero emissions. This report describes data compiled in 2008 on trends in the fuel cell

  19. Water Science and Technology Board. Annual report 1991

    SciTech Connect

    Not Available

    1995-01-01

    This report summarizes the activities of the Water Science and Technology Board during 1991. The WSTB is intended to be a dynamic forum, a mechanism by which the broad community of water science, technology, and policy professionals can help assure high-quality national water programs. The principal products of WSTB studies are written reports which cover a wide range of water resources issues of current national concern. A few recent examples are: Restoration of aquatic ecosystems - science, technologies and public policy; Water transfers in the West - efficiency, equity and the environment; Opportunities in the hydrologic sciences; and Ground water models - scientific and regulatory applications. Projects completed, ongoing studies and published reports are described in detail in their respective sections of this report.

  20. Bioremediation Education Science and Technology (BEST) Program Annual Report 1999

    SciTech Connect

    Hazen, Terry C.

    2000-07-01

    The Bioremediation, Education, Science and Technology (BEST) partnership provides a sustainable and contemporary approach to developing new bioremedial technologies for US Department of Defense (DoD) priority contaminants while increasing the representation of underrepresented minorities and women in an exciting new biotechnical field. This comprehensive and innovative bioremediation education program provides under-represented groups with a cross-disciplinary bioremediation cirruculum and financial support, coupled with relevant training experiences at advanced research laboratories and field sites. These programs are designed to provide a stream of highly trained minority and women professionals to meet national environmental needs.

  1. Water Science and Technology Board annual report, 1990

    SciTech Connect

    Not Available

    1990-01-01

    This report summarizes the activities of the Water Science and Technology Board (WSTB) during 1990, its eighth year of existence. It describes current and recently completed projects, new activities scheduled to begin in 1991, and plans for the future. The WSTB is intended to be a dynamic forum, a mechanism by which the board community of water science, technology, and policy professionals can help assure high-quality national water programs. As such, the Board considers out-reach and communications of much importance.

  2. Water Science and Technology Board annual report, 1990

    SciTech Connect

    Not Available

    1990-12-31

    This report summarizes the activities of the Water Science and Technology Board (WSTB) during 1990, its eighth year of existence. It describes current and recently completed projects, new activities scheduled to begin in 1991, and plans for the future. The WSTB is intended to be a dynamic forum, a mechanism by which the board community of water science, technology, and policy professionals can help assure high-quality national water programs. As such, the Board considers out-reach and communications of much importance.

  3. ATTAP: Advanced Turbine Technology Applications Project. Annual report, 1991

    SciTech Connect

    Not Available

    1992-12-01

    Purpose of ATTAP is to bring the automotive gas turbine engine to a technology state at which industry can make commercialization decisions. Activities during the past year included test-bed engine design and development, ceramic component design, materials and component characterization, ceramic component process development and fabrication, ceramic component rig testing, and test-bed engine fabrication and testing.

  4. Water Science and Technology Board. Annual report 1993-1994

    SciTech Connect

    Not Available

    1995-01-01

    This report summarizes the activities of the Water Science and Technology Board during 1993-1994. The WSTB is intended to be a dynamic forum, a mechanism by which the broad community of water science, technology, and policy professionals can help assure high-quality national water programs. The principal products of WSTB studies are written reports which cover a wide range of water resources issues of current national concern. A few recent examples are: Alternatives for ground water cleanup; Managing wastewater in coastal urban areas; and, Water transfers in the West - efficiency, equity and the environment. Projects completed, ongoing studies and published reports are described in detail in their respective sections of this report.

  5. Water Science and Technology Board. Annual report 1992-1993

    SciTech Connect

    Not Available

    1995-01-01

    This report summarizes the activities of the Water Science and Technology Board during 1992. The WSTB is intended to be a dynamic forum, a mechanism by which the broad community of water science, technology, and policy professionals can help assure high-quality national water programs. The principal products of WSTB studies are written reports which cover a wide range of water resources issues of current national concern. A few recent examples are: Managing wastewater in coastal urban areas; Ground water vulnerability assessment; Water transfers in the West - efficiency, equity and the environment; and Opportunities in the hydrologic sciences. Projects completed, ongoing studies and published reports are described in detail in their respective sections of this report.

  6. 2013 Fuel Cycle Technologies Annual Review MeetingTransactions Report

    SciTech Connect

    Not Listed

    2013-11-01

    The Fuel Cycle Technologies (FCT) program of the Department of Energy (DOE) Office of Nuclear Energy (NE) is charged with identifying promising sustainable fuel cycles and developing strategies for effective disposition of used fuel and high-level nuclear waste, enabling policymakers to make informed decisions about these critical issues. Sustainable fuel cycles will improve uranium resource utilization, maximize energy generation while minimizing waste, improve safety, and limit proliferation risk. To achieve its mission, FCT has initiated numerous activities in each of the technical campaign areas, of which this report provides a sample.

  7. Geothermal Injection Technology Program: Annual progress report, Fiscal Year 1986

    SciTech Connect

    Not Available

    1987-07-01

    This report summarizes the Geothermal Injection Technology Program major activities in fiscal year 1986. The Idaho Engineering Laboratory (INEL) and the University of Utah Research Institute (UURI) have been conducting injection research and testing for this program, which was initiated in 1983. Activities at the INEL, representative element nodeling of fracture systems based on stochastic analysis, dual permeability modeling of flow in a fractured geothermal reservoir, and dual permeability model - laboratory and FRACSL-validation studies, are presented first, followed by the University of Utah Research Institute tracer development - experimental studies, which includes a brief description of activities planned for FY-1987.

  8. Heavy oil reservoirs recoverable by thermal technology. Annual report

    SciTech Connect

    Kujawa, P.

    1981-02-01

    This volume contains reservoir, production, and project data for target reservoirs thermally recoverable by steam drive which are equal to or greater than 2500 feet deep and contain heavy oil in the 8 to 25/sup 0/ API gravity range. Data were collected from three source types: hands-on (A), once-removed (B), and twice-removed (C). In all cases, data were sought depicting and characterizing individual reservoirs as opposed to data covering an entire field with more than one producing interval or reservoir. The data sources are listed at the end of each case. This volume also contains a complete listing of operators and projects, as well as a bibliography of source material.

  9. Clean ferrous casting technology research. Annual report, September 29, 1994--September 28, 1995

    SciTech Connect

    Griffin, J.; Bates, C.E.; Piwonka, T.S.

    1995-10-31

    This annual report covers work performed in the second year of research on Clean Ferrous Casting Technology Research. Significant progress was made in establishing pouring practices which avoid re-oxidation of steel during pouring; application of revised pouring practices have led to reduced inclusion levels in commercially poured steel castings.

  10. Hydrogen Technology Validation: DOE Hydrogen Program 2011 Annual Merit Review and Peer Evaluation Report

    Energy.gov [DOE]

    This document summarizes the comments provided by peer reviewers on hydrogen and fuel cell projects presented at the FY 2011 U.S. Department of Energy (DOE) Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting (AMR), held May 9–13, 2011 in Arlington, VA.

  11. 2015 Hydrogen and Fuel Cell Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting

    Energy.gov [DOE]

    At the Hydrogen and Fuel Cell Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting (AMR), advanced vehicle technologies projects funded by VTO and the Fuel Cell...

  12. Building America Technology Solutions Case Study: Sealed Crawled...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Case Study: Sealed Crawled Spaces with Integrated Whole-House Ventilation in a Cold Climate Building America Technology Solutions Case Study: Sealed Crawled Spaces with...

  13. Direct conversion technology: Annual summary report CY 1988

    SciTech Connect

    Massier, P.F.; Bankston, C.P.; Fabris, G.; Kirol, L.D.

    1988-12-01

    The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct thermal-to-electric energy conversion systems that have potential application for energy conservation in the end-use sectors. This report contains progress of research on the Alkali Metal Thermal-to-Electric Converter (AMTEC), and on the Two-Phase Liquid-Metal MHD Electrical Generator (LMMHD) for the period January 1988 through December 1988. Research on these concepts was initiated during October 1987. In addition, status reviews and assessments are presented for thermomagnetic converter concepts and for thermoelastic converters (Nitinol heat engines). Reports prepared on previous occasions contain discussions on the following other direct conversion concepts: thermoelectric, pyroelectric, thermionic thermophotovoltaic and thermoacoustic; and also, more complete discussions of AMTEC and LMMHD systems. A tabulated summary of the various systems which have been reviewed thus far has been prepared. Some of the important technical research needs are listed and a schematic of each system is shown. These tabulations are included herein as figures. 43 refs., 26 figs., 1 tab.

  14. Annual Technology Baseline (Including Supporting Data); NREL (National Renewable Energy Laboratory)

    SciTech Connect

    Blair, Nate; Cory, Karlynn; Hand, Maureen; Parkhill, Linda; Speer, Bethany; Stehly, Tyler; Feldman, David; Lantz, Eric; Augusting, Chad; Turchi, Craig; O'Connor, Patrick

    2015-07-08

    Consistent cost and performance data for various electricity generation technologies can be difficult to find and may change frequently for certain technologies. With the Annual Technology Baseline (ATB), National Renewable Energy Laboratory provides an organized and centralized dataset that was reviewed by internal and external experts. It uses the best information from the Department of Energy laboratory's renewable energy analysts and Energy Information Administration information for conventional technologies. The ATB will be updated annually in order to provide an up-to-date repository of current and future cost and performance data. Going forward, we plan to revise and refine the values using best available information. The ATB includes both a presentation with notes (PDF) and an associated Excel Workbook. The ATB includes the following electricity generation technologies: land-based wind; offshore wind; utility-scale solar PV; concentrating solar power; geothermal power; hydropower plants (upgrades to existing facilities, powering non-powered dams, and new stream-reach development); conventional coal; coal with carbon capture and sequestration; integrated gasification combined cycle coal; natural gas combustion turbines; natural gas combined cycle; conventional biopower. Nuclear laboratory's renewable energy analysts and Energy Information Administration information for conventional technologies. The ATB will be updated annually in order to provide an up-to-date repository of current and future cost and performance data. Going forward, we plan to revise and refine the values using best available information.

  15. 5. annual clean coal technology conference: powering the next millennium. Volume 2

    SciTech Connect

    1997-06-01

    The Fifth Annual Clean Coal Technology Conference focuses on presenting strategies and approaches that will enable clean coal technologies to resolve the competing, interrelated demands for power, economic viability, and environmental constraints associated with the use of coal in the post-2000 era. The program addresses the dynamic changes that will result from utility competition and industry restructuring, and to the evolution of markets abroad. Current projections for electricity highlight the preferential role that electric power will have in accomplishing the long-range goals of most nations. Increase demands can be met by utilizing coal in technologies that achieve environmental goals while keeping the cost- per-unit of energy competitive. Results from projects in the DOE Clean Coal Technology Demonstration Program confirm that technology is the pathway to achieving these goals. The industry/government partnership, cemented over the past 10 years, is focused on moving the clean coal technologies into the domestic and international marketplaces. The Fifth Annual Clean Coal Technology Conference provides a forum to discuss these benchmark issues and the essential role and need for these technologies in the post-2000 era. This volume contains technical papers on: advanced coal process systems; advanced industrial systems; advanced cleanup systems; and advanced power generation systems. In addition, there are poster session abstracts. Selected papers from this proceedings have been processed for inclusion in the Energy Science and Technology database.

  16. Compressed air energy storage technology program. Annual report for 1979

    SciTech Connect

    Loscutoff, W.V.

    1980-06-01

    The objectives of the Compressed Air Energy Storage (CAES) program are to establish stability criteria for large underground reservoirs in salt domes, hard rock, and porous rock used for air storage in utility applications, and to develop second-generation CAES technologies that have minimal or no dependence on petroleum fuels. During the year reported reports have been issued on field studies on CAES on aquifers and in salt, stability, and design criteria for CAES and for pumped hydro-storage caverns, laboratory studies of CAES in porous rock reservoris have continued. Research has continued on combined CAES/Thermal Energy Storage, CAES/Solar systems, coal-fired fluidized bed combustors for CAES, and two-reservoir advanced CAES concepts. (LCL)

  17. Annual Energy Outlook 2014 Early Release Reference Case

    Gasoline and Diesel Fuel Update

    Annual Coal Report 2015 November 2016 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other officer or employee of the United States Government. The views in this report therefore should not be construed as

  18. Annual Energy Outlook 2013 Early Release Reference Case

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    resource and technology scenario (a key driver of domestic gas prices); global energy market prices (which along with domestic prices defines the "gap" that determines the...

  19. New Online Tools Showcase Efficient Technologies and Deployment Case

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Studies | Department of Energy New Online Tools Showcase Efficient Technologies and Deployment Case Studies New Online Tools Showcase Efficient Technologies and Deployment Case Studies September 29, 2015 - 12:49pm Addthis New Online Tools Showcase Efficient Technologies and Deployment Case Studies The Federal Energy Management Program (FEMP) released two new online tools to help agencies choose energy- and water-efficient technologies and products for deployment in federal facilities. Now

  20. Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

    SciTech Connect

    Yeh, B.

    2011-03-01

    This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

  1. Citizens for Nuclear Technology Awareness (CNTA) will hold their 23rd Annual

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Citizens for Nuclear Technology Awareness (CNTA) will hold their 23rd Annual Edward Teller Lecture and Banquet on Monday, October 20, 2014 at the USCA Convocation Center in Aiken. The lecture is a community event attended by community leaders, CNTA members, local and national business and corporate interests, government and Savannah River Site officials, and elected officials from Georgia and South Carolina. Our guest speaker this year is award winning documentary filmmaker, Robert Stone.

  2. DOE FreedomCAR and vehicle technologies program advanced power electronic and electrical machines annual review report

    SciTech Connect

    Olszewski, Mitch

    2006-10-11

    This report is a summary of the Review Panel at the FY06 DOE FreedomCAR and Vehicle Technologies (FCVT) Annual Review of Advanced Power Electronics and Electric Machine (APEEM) research activities held on August 15-17, 2006.

  3. Building America Technology Solutions Case Study: Design Guidance...

    Energy Saver

    Design Guidance for Passive Vents in New Construction, Multifamily Buildings Building America Technology Solutions Case Study: Design Guidance for Passive Vents in New Construction...

  4. Technology Solutions for New Homes Case Study: Columbia County...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Columbia County Habitat for Humanity Passive Townhomes Technology Solutions for New Homes Case Study: Columbia County Habitat for Humanity Passive Townhomes The Columbia County ...

  5. Building America Technology Solutions Case Study: Field Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Performance of Inverter-Driven Heat Pumps in Cold Climates Building America Technology Solutions Case Study: Field Performance of Inverter-Driven Heat Pumps in Cold Climates The ...

  6. Systems analysis research for energy conversion and utilization technologies (ECUT). FY 1985 annual report

    SciTech Connect

    Eberhardt, J.J.; Gunn, M.E.; Levinson, T.M.

    1985-11-01

    This Annual Report highlights ECUT accomplishments in the Systems Analysis Project for FY 1985. The Systems Analysis Project was established in 1980 along with the ECUT Division. The Systems Analysis mission is to identify, analyze, and assess R and D needs and research program strategies for advanced conservation technologies. The PNL Systems Analysis staff conducts topical research, provides technical studies, and plans program activities in three areas related to energy conversion and utilization technologies: (1) technology assessment, (2) engineering analysis, and (3) project evaluation and review. This report summarizes the technical results and accomplishments of the FY 1985 projects. They relate mostly to tribology, improved ctalysts, regenerative heat exchangers, robotics and electronics industries, and bioprocessing.

  7. Clean Ferrous Casting Technology Research. Annual report, September 29, 1993--September 28, 1994

    SciTech Connect

    Stefanescu, D.M.; Lane, A.M.; Giese, S.R.; Pattabhi, R.; El-Kaddah, N.H.; Griffin, J.; Bates, C.E.; Piwonka, T.S.

    1994-10-01

    This annual report covers work performed in the first year of research on Clean Ferrous Casting Technology Research. During this year the causes of penetration of cast iron in sand molds were defined and a program which predicts the occurrence of penetration was written and verified in commercial foundries. Calculations were made to size a reaction chamber to remove inclusions from liquid steel using electromagnetic force and the chamber was built. Finally, significant progress was made in establishing pouring practices which avoid re-oxidation of steel during pouring application of revised pouring practices have led to reduced inclusion levels in commercially poured steel castings.

  8. 2003 East Tennessee Technology Park Annual Illness and Injury Surveillance Report

    SciTech Connect

    U.S. Department of Energy, Office of Health, Safety and Security, Office of Illness and Injury Prevention Programs

    2007-05-23

    Annual Illness and Injury Surveillance Program report for 2003 for the East Tennessee Technology Park (K-25).The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

  9. NETL Technology Transfer Case Studies and Awards

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Success Stories LiquidIonSolutionImage TRANSFORMATIONAL TECHNOLOGY FOR CARBON DIOXIDE CAPTURE Working in collaboration with partners at Carnegie Mellon University, NETL researchers have developed a number of novel ionic liquids and polymers that provide a more efficient and economical process for carbon dioxide capture. The suite of technologies, covering the syntheses and use of ionic liquids, has been elusively licensed to Liquid Ion Solutions, a Pittsburgh-based chemicals manufacturing

  10. Office of Renewable Energy Technology Geothermal and Hydropower Technologies Division, FY 1983 Annual Operating Plan

    SciTech Connect

    1983-01-01

    There are between 700 and 3400 guads of recoverable geothermal energy in the US. Hydrothermal, geopressure and hot dry rock are the three principal types of geothermal resources (in order of technological readiness) which can supply large amounts of energy for electric power production and direct heat applications. Hydrothermal resources include water and steam trapped in fractured or porous rocks. A hydrothermal system is classified as either hot-water or vapor-dominated (steam), according to the principal physical state of the fluid. Geopressured resources consist of water at moderately high temperatures at pressures higher than normal hydrostatic pressure. This water contains dissolved methane. Geopressured sources in sedimentary formations along the Texas and Louisiana Gulf Coast are believed to be quite large. Geopressured formations also exist in sedimentary basins elsewhere in the US. Hot dry rock resources consist of relatively unfractured and unusually hot rocks at accessible depths that contain little or no water. To extract usable power from hot dry rock, the rock must be fractured and a confined fluid circulation system created. A heat transfer fluid is introduced, circulated, and withdrawn. The overall goal of the Geothermal Program is to build a technology base that will be used by the private sector to exploit geothermal resources which can supply large amounts of energy for electric power production and direct-heat applications.

  11. Proof of feasibility of the through casing resistivity technology

    SciTech Connect

    Vail, Dr. W. Banning; Momii, Steven T.

    2000-06-21

    This project is to definitely prove that the resistivity of geological formations can be measured from within cased wells and to license the relevant patents and technology to major wireline service companies.

  12. Technology Solutions for New Homes Case Study: Indirect Solar...

    Energy Saver

    Indirect Solar Water Heating Systems in Single-Family Homes Technology Solutions for New Homes Case Study: Indirect Solar Water Heating Systems in Single-Family Homes In 2011, ...

  13. Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Project | Department of Energy Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project This presentation by Paul Faulstich focuses on the Chewonki Renewable Hydrogen Project. education_presentation_faulstich.pdf (586.19 KB) More Documents & Publications EIS-0073: Final Environmental Impact Statement EIS-0063: Final Environmental Impact Statement EIS-0063: Draft Environmental Impact

  14. ORNL superconducting technology program for electric power systems. Annual report for FY 1993

    SciTech Connect

    Hawsey, R.A.

    1994-04-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are conductor development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1993 Annual Program Review held July 28--29, 1993. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to industrial competitiveness projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer to US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

  15. Building America Technology Solutions for New and Existing Homes Case

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Study: Field Testing an Unvented Roof with Fibrous Insulation and Tiles | Department of Energy Homes Case Study: Field Testing an Unvented Roof with Fibrous Insulation and Tiles Building America Technology Solutions for New and Existing Homes Case Study: Field Testing an Unvented Roof with Fibrous Insulation and Tiles This case study by the U.S. Department of Energy's Building America research team Building Science Corporation is a test implementation of an unvented tile roof assembly in a

  16. Chrysler: Save Energy Now Assessment Enables a Vehicle Assembly Complex to Achieve Significant Natural Gas Savings; Industrial Technologies Program (ITP) Save Energy Now Case Study.

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    powerhouse at Chrysler's St. Louis Assembly Complex provides steam, chilled water, and compressed air to both the north and south plants. Chrysler: Save Energy Now Assessment Enables a Vehicle Assembly Complex to Achieve Significant Natural Gas Savings Industrial Technologies Program Case Study Benefits * Achieves annual energy savings of $627,000 * Achieves annual natural gas savings of more than 70,000 MMBtu * Yields a simple payback of just over 2 months Key Findings * Independent evaluations

  17. Goodyear Tire Plant Gains Traction on Energy Savings After Completing Save Energy Now Assessment; Industrial Technologies Program (ITP) Save Energy Now Case Study (Brochure)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Goodyear operates more than 60 facilities in 26 countries, including the Union City, Tennessee, plant pictured above. Goodyear Tire Plant Gains Traction on Energy Savings After Completing Save Energy Now Assessment Saves $875,000 in Energy Costs; Reduces Natural Gas Consumption Industrial Technologies Program Case Study Benefits * Implemented approximately $875,000 in annual energy cost savings * Achieves annual natural gas savings of more than 93,000 MMBtu * Reduces No. 6 fuel oil consumption

  18. Hurdling barriers through market uncertainty: Case studies ininnovative technology adoption

    SciTech Connect

    Payne, Christopher T.; Radspieler Jr., Anthony; Payne, Jack

    2002-08-18

    The crisis atmosphere surrounding electricity availability in California during the summer of 2001 produced two distinct phenomena in commercial energy consumption decision-making: desires to guarantee energy availability while blackouts were still widely anticipated, and desires to avoid or mitigate significant price increases when higher commercial electricity tariffs took effect. The climate of increased consideration of these factors seems to have led, in some cases, to greater willingness on the part of business decision-makers to consider highly innovative technologies. This paper examines three case studies of innovative technology adoption: retrofit of time-and-temperature signs on an office building; installation of fuel cells to supply power, heating, and cooling to the same building; and installation of a gas-fired heat pump at a microbrewery. We examine the decision process that led to adoption of these technologies. In each case, specific constraints had made more conventional energy-efficient technologies inapplicable. We examine how these barriers to technology adoption developed over time, how the California energy decision-making climate combined with the characteristics of these innovative technologies to overcome the barriers, and what the implications of hurdling these barriers are for future energy decisions within the firms.

  19. Technology Solutions Case Study: Overcoming Comfort Issues Due to Reduced

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Flow Room Air Mixing | Department of Energy Case Study: Overcoming Comfort Issues Due to Reduced Flow Room Air Mixing Technology Solutions Case Study: Overcoming Comfort Issues Due to Reduced Flow Room Air Mixing Energy efficiency upgrades reduce heating and cooling loads on a house. With enough load reduction and if the heating, ventilating, and air-conditioning (HVAC) system warrants replacement, the HVAC system is often upgraded with a more efficient, lower capacity system that meets the

  20. Demonstrating and implementing innovative technologies: Case studies from the USDOE Office of Technology Development

    SciTech Connect

    Brouns, T.M.; Koegler, K.J.; Mamiya, L.S.

    1995-02-01

    This paper describes elements of success for demonstration, evaluation, and transfer for deployment of innovative technologies for environmental restoration. They have been compiled from lessons learned through the US Department of Energy (DOE) Office of Technology Development`s Volatile Organic Compounds in Arid Soil Integrated Demonstration (VOC-Arid ID). The success of the VOC-Arid ID program was determined by the rapid development demonstration, and transfer for deployment of technologies to operational sites that improve on safety, cost, and/or schedule of performance over baseline technologies. The VOC-Arid ID successfully fielded more than 25 innovative technology field demonstrations; several of the technologies demonstrated have been successfully transferred for deployment Field demonstration is a critical element in the successful transfer of innovative technologies into environmental restoration operations. The measures of success for technology demonstrations include conducting the demonstration in a safe and controlled environment and generating the appropriate information by which to evaluate the technology. However, field demonstrations alone do not guarantee successful transfer for deployment There are many key elements throughout the development and demonstration process that have a significant impact on the success of a technology. This paper presents key elements for a successful technology demonstration and transfer for deployment identified through the experiences of the VOC-Arid ID. Also, several case studies are provided as examples.

  1. Case Study – Idling Reduction Technologies for Emergency Service Vehicles

    SciTech Connect

    Laughlin, Michael; Owens, Russell J.

    2016-01-01

    This case study explores the use of idle reduction technologies (IRTs) on emergency service vehicles in police, fire, and ambulance applications. Various commercially available IRT systems and approaches can decrease, or ultimately eliminate, engine idling. Fleets will thus save money on fuel, and will also decrease their criteria pollutant emissions, greenhouse gas emissions, and noise.

  2. Interstate Technology & Regulatory Council (ITRC) Remediation Management of Complex Sites: Case Studies and Guidance

    Energy.gov [DOE]

    Interstate Technology & Regulatory Council (ITRC) Remediation Management of Complex Sites: Case Studies and Guidance

  3. Advanced processing technology for high-efficiency, thin-film CuInSe{sub 2} and CdTe solar cells. Annual subcontract report, 1 March 1993--28 February 1994

    SciTech Connect

    Morel, D.L.; Ferekides, C.S.

    1994-07-01

    This annual report details activities in research on advanced processing technology for high-effiency, thin-film solar cells.

  4. Geothermal Technology Development Program annual progress report, October 1982-September 1983

    SciTech Connect

    Kelsey, J.R.

    1984-05-01

    The program emphasizes research in rock penetration mechanics, fluid technology, borehold mechanics, diagnostics technology, and permeability enhancement.

  5. An Updated Annual Energy Outlook 2009 Reference Case Reflecting Provisions of the American Recovery and Reinvestment Act and Recent Changes in the Economic Outlook

    Reports and Publications

    2009-01-01

    This report updates the Reference Case presented in the Annual Energy Outlook 2009 based on recently enacted legislation and the changing macroeconomic environment.

  6. Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988. Fiscal year 1993 annual report

    SciTech Connect

    Not Available

    1994-09-01

    The Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988 (Act), commonly referred to as the Metals Initiative, was signed into law on November 17, 1988 (Public Law 100-680). The Act, 15 U.S.C. 5101 et seq., has tile following purposes: (1) to {open_quotes}increase the energy efficiency and enhance the competitiveness of American steel, aluminum, and copper industries{close_quotes}; and (2) to continue the research and development efforts begun under the Department of Energy (DOE) program known as the Steel Initiative. Section 8 of tile Act requires the Secretary of Energy to prepare an annual report to Congress describing the activities carried out under the Act during each fiscal year. 15 U.S.C. 5107 In addition, with respect to reports on fiscal years 1993, 1995, and 1997, Section 8 requires a complete summary of activities under the management plan and research plan from inception with an analysis of extent of their success in accomplishing the purposes of the Act. Id. The Metals Initiative is currently supporting six steel industry research and development projects: (1) Superplastic Steel Processing with Lawrence Livermore National Laboratory; (2) Direct Steelmaking with the American Iron and Steel Institute; (3) Electrochemical Dezincing of Steel Scrap with Argonne National Laboratory and Metal Recovery Industries (U.S.), Inc.; (4) Rapid Analysis of Molten Metals Using Laser Produced Plasmas with Lehigh University; (5) Direct Strip Casting using a single wheel caster with Armco, Inc.; and (6) Advanced Process Control, also with the American Iron and Steel Institute. At the close of the fiscal year, a seventh project, Waste Oxide Recycling with the American Iron and Steel Institute, was selected for inclusion in the Direct Steelmaking project. There are three projects with the aluminum industry. The first, Wettable Cathodes for Alumina Reduction Cells with the Reynolds Metals Company, continues from the prior periods.

  7. Vehicle Technologies Office: 2015 Electric Drive Technologies...

    Office of Environmental Management (EM)

    Electric Drive Technologies Annual R&D Progress Report Vehicle Technologies Office: 2015 Electric Drive Technologies Annual R&D Progress Report The Electric Drive Technologies ...

  8. Pilot Project Technology Business Case: Mobile Work Packages

    SciTech Connect

    Thomas, Ken; Lawrie, Sean; Niedermuller, Josef

    2015-05-01

    Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such that it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. The Business Case Methodology (BCM) was developed in September of 2015 to frame the benefit side of II&C technologies to address the “benefit” side of the analysis—as opposed to the cost side—and how the organization evaluates discretionary projects (net present value (NPV), accounting effects of taxes, discount rates, etc.). The cost and analysis side is not particularly difficult for the organization and can usually be determined with a fair amount of precision (not withstanding implementation project cost overruns). It is in determining the “benefits” side of the analysis that utilities have more difficulty in technology projects and that is the focus of this methodology. The methodology is presented in the context of the entire process, but the tool provided is limited to determining the organizational benefits only. This report describes a the use of the BCM in building a business case for mobile work packages, which includes computer-based procedures and other automated elements of a work package. Key to those impacts will be identifying where the savings are

  9. Productivity genefits from new energy technology: A case study of a paint manufacturing company

    SciTech Connect

    Raghunathan, P.; Capehart, B.L.

    1997-06-01

    In many cases, implementing new energy efficiency technologies not only helps facilities reduce their energy costs, but it also creates greater profits by increasing productivity. These added benefits from productivity improvements can sometimes be greater than the energy cost savings, and can result in an attractive overall payback period for implementing the new technology. This paper presents a case study of productivity improvement at a paint manufacturing company as a result of implementing new energy efficiency technology. During an industrial energy assessment, it was noted that the company had experienced frequent failures of motor belts and sheaves on five paint mixers resulting in significant replacement costs and labor costs. In addition, a bigger loss was being suffered due to lost potential profit associated with the frequent work stoppages. The IAC recommendation was to install motor soft starters (also known as motor voltage controllers) on the five mixing machines. Installation of soft starters would have the following benefits: lower energy costs, lower replacement costs for transmission components, lower labor costs, and higher production levels and increased profits. The total annual benefits were estimated at $122,659, of which the benefits from increased productivity were nearly $67,000. The overall simple payback period for installing the soft starters was less than 2 months.

  10. MHD Technology Transfer, Integration and Review Committee. Seventh semi-annual status report, April 1991--September 1991

    SciTech Connect

    Not Available

    1993-02-01

    This seventh semi-annual status report of the MHD Technology Transfer, Integration and Review Committee (TTIRC) summarizes activities of the TTIRC during the period April 1991 through September 1991. It includes a summary and minutes of the General Committee meeting, progress summaries of ongoing POC contracts, discussions pertaining to technical integration issues in the POC program, and planned activities for the next six months. The meeting included test plan with Western coal, seed regeneration economics, power management for the integrated topping cycle and status of the Clean Coal Technology Proposal activities. Appendices cover CDIF operations HRSR development, CFFF operations etc.

  11. Building America Technology Solutions Case Study: Combustion Safety

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Simplified Test Protocol | Department of Energy Combustion Safety Simplified Test Protocol Building America Technology Solutions Case Study: Combustion Safety Simplified Test Protocol Two U.S. Department of Energy Building America teams-Partnership for Advanced Residential Retrofit and NorthernSTAR Building America Partnership -developed a simplified test procedure (STP) to address combustion safety to implement than current tests and should produce fewer false positives. Combustion Safety

  12. Building America Technology Solutions Case Study: Design Guidance for

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Passive Vents in New Construction, Multifamily Buildings | Department of Energy Design Guidance for Passive Vents in New Construction, Multifamily Buildings Building America Technology Solutions Case Study: Design Guidance for Passive Vents in New Construction, Multifamily Buildings In an effort to improve indoor air quality in high-performance, new construction, multifamily buildings, dedicated sources of outdoor air are being implemented. Passive vents are being selected by some design

  13. Building America Technology Solutions Case Study: Evaluation of Passive

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vents in New-Construction Multifamily Buildings | Department of Energy Evaluation of Passive Vents in New-Construction Multifamily Buildings Building America Technology Solutions Case Study: Evaluation of Passive Vents in New-Construction Multifamily Buildings The Consortium for Advanced Residential Buildings (CARB) conducted research to gain more insight into passive vents. Because passive vents are meant to operate in a general environment of negative apartment pressure, the research

  14. Building America Technology Solutions Case Study: Field Performance of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Inverter-Driven Heat Pumps in Cold Climates | Department of Energy Performance of Inverter-Driven Heat Pumps in Cold Climates Building America Technology Solutions Case Study: Field Performance of Inverter-Driven Heat Pumps in Cold Climates The DOE Building America team Consortium for Advanced Residential Buildings (CARB) monitored seven inverter-driven ASHPs across the northeast United States during the winter of 2013-2014. Field Performance of Inverter-Driven Heat Pumps in Cold Climates

  15. Building America Technology Solutions Case Study: Field Testing an Unvented

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Roof with Asphalt Shingles in a Cold Climate | Department of Energy Testing an Unvented Roof with Asphalt Shingles in a Cold Climate Building America Technology Solutions Case Study: Field Testing an Unvented Roof with Asphalt Shingles in a Cold Climate In this project, Building America team Building Science Corporation devised an experiment to build and instrument unvented test roofs using air-permeable insulation (dense-pack cellulose and fiberglass) in a cold climate (Chicago, Illinois

  16. Building America Technology Solutions Case Study: Sealed Crawled Spaces

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    with Integrated Whole-House Ventilation in a Cold Climate | Department of Energy Sealed Crawled Spaces with Integrated Whole-House Ventilation in a Cold Climate Building America Technology Solutions Case Study: Sealed Crawled Spaces with Integrated Whole-House Ventilation in a Cold Climate The Building America team Consortium for Advanced Residential Buildings (CARB) investigated a hybrid ventilation method that included the exhaust air from the crawl space as part of an ASHRAE

  17. U.S. Energy Information Administration | Electric Power Annual

    Energy Information Administration (EIA) (indexed site)

    Annual

  18. New Approaches and Technologies to Sequence de novo Plant reference Genomes (2013 DOE JGI Genomics of Energy and Environment 8th Annual User Meeting)

    SciTech Connect

    Schmutz, Jeremy [HudsonAlpha Institute

    2013-03-01

    Jeremy Schmutz of the HudsonAlpha Institute for Biotechnology on "New approaches and technologies to sequence de novo plant reference genomes" at the 8th Annual Genomics of Energy & Environment Meeting on March 27, 2013 in Walnut Creek, Calif.

  19. The Terascale Simulation Tools and Technologies Center Annual Report August 15, 2001-September 30, 2002

    SciTech Connect

    Glimm, J; Brown, D L; Freitag, L

    2002-09-30

    The overall goal of the TSTT Center is to enable the scientific community to more easily use modern high-order, adaptive, parallel mesh and discretization tools. To achieve this goal, we are following three distinct but related paths. The first is to work directly with a number of lead application teams (for the most part SciDAC-funded) to use such technologies in their application domains. The second is to create new technology that eases the use of such tools, not only for our designated application partners, but across a broad range of application areas that require mesh and discretization tools for scientific simulation. The main technology thrust is not to create new tools (although some of this will occur), but to create new capabilities that will allow the use of these tools interoperably. This very profound step can be compared to the shift from hand craftmanship to manufactured products with interchangable components which revolutionized the world economy one to two centuries ago. The third component of our efforts is to embed this work in a larger framework of related activities, each seeking a similar, and profound, change in the practice of computational science. To ensure the relevance of our work to the SciDAC program goals, we originally selected six application areas, and in each, one or more application projects and teams with which to work directly. One application collaboration which targeted the development of an adaptive mesh refinement capability for the oceanographic code POP was postponed and may be dropped due to unanticipated technical obstacles in the specific goal selected. One new application involving jet breakup for spray combustion was added. The initial job of establishing good working relations, agreement on a plan of action, and obtaining initial results was accomplished in all cases. In general, our work with the applications has been more difficult than anticipated, in spite of the experience of the TSTT team members in similar

  20. Annual Performance Report FY 2005 Annual Performance Plan FY 2006 |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy 5 Annual Performance Plan FY 2006 Annual Performance Report FY 2005 Annual Performance Plan FY 2006 Annual Performance Report FY 2005 Annual Performance Plan FY 2006 Annual Performance Report FY 2005 Annual Performance Plan FY 2006 (2.47 MB) More Documents & Publications Annual Performance Report FY 2005 Annual Performance Plan FY 2006 Vehicle Technologies Office Merit Review 2016: Overview and Progress of the Advanced Battery Materials Research (BMR) Program FY 2006

  1. Internal offsets and technological innovation: six case studies, Volume 9

    SciTech Connect

    Mogee, M.E.

    1982-04-01

    The experiences of six industrial firms with the new Federal policy of internal offsets are described. Offsets, regulatory reforms initiated by the Environmental Protection Agency and called by the generic title of emission trading, were introduced to allow continued economic growth in nonattainment areas and to stimulate innovation in pollution control and process technology by making it profitable for firms to create more reductions than the law now requires. The problems of defining and measuring innovation as well as presenting industrial firm perceptions of innovation associated with offset cases are discussed.

  2. NETL-RUA Annual Review FY2012 DOE/NETL-2012/1579 National Energy Technology Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NETL-RUA Annual Review FY2012 DOE/NETL-2012/1579 National Energy Technology Laboratory Office of Research and Development 2 NETL-RUA Disclaimer This document was prepared as an account of work sponsored by an agency of the U.S. Government. Neither the U.S. Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or

  3. Vehicle Technologies Office: 2015 Lightweight Materials R&D Annual Progress Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Lightweight Materials research and development (R&D) area within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under...

  4. The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2001

    SciTech Connect

    National Energy Technology Laboratory

    2002-10-01

    No significant environmental problems were identified at the National Energy Technology Laboratory (NETL) sites in Morgantown (MGN), Pittsburgh (PGH), Tulsa (NPTO) and Fairbanks (AEO) during 2001. No radionuclides were released from the sites during 2001. The sites maintain two major environmental programs: waste management, and environmental media and release management. These two programs encompass waste handling, storage, and disposal, waste minimization and pollution prevention, air quality emissions, surface-water discharges, groundwater impacts, industrial wastewater discharges, and spill control procedures. The Morgantown and Pittsburgh sites currently maintain complete monitoring programs for groundwater, stormwater discharge, laboratory wastewater discharge, and meteorological data. In addition, an annual air emissions inventory is prepared. A comprehensive Directives Program aimed at managing environmental, safety, health requirements, and risks was initiated in 1997, continued through subsequent years, and will be completed in 2003. The primary objective of the program is to identify and implement standards that will protect the health and safety of workers, public, and the environment. This program started with a careful and thorough analysis of risks confronting workers and the communities surrounding NETL sites. Following this analysis, requirements and best management practices were evaluated to determine how requirements could best be used to advance the mission of NETL. Teams of subject-matter experts analyzed the work assigned to determine potential hazards and identify ways to remove or control those hazards. In 2001, NETL developed or revised a series of directives in two major areas: safety analysis and review (SAR) processes, and integrated safety management (ISM) directives. SAR directives were issued for research and development (R&D) operations, support operations, and facilities. ISM directives were released on management processes, such

  5. Geothermal Technology Development Program. Annual progress report, October 1983-September 1984

    SciTech Connect

    Kelsey, J.R.

    1985-08-01

    This report describes the status of ongoing Research and Development (R and D) within the Geothermal Technology Development Program. The work reported is sponsored by the Department of Energy/Geothermal Hydropower Technology Division (DOE/GHTD), with program management provided by Sandia National Laboratories. The program emphasizes research in rock penetration mechanics, fluid technology, borehole mechanics, diagnostics technology, and permeability enhancement. 102 figs., 16 tabs.

  6. Geothermal drilling ad completion technology development program. Semi-annual progress report, April-September 1979

    SciTech Connect

    Varnado, S.G.

    1980-05-01

    The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, and completion technology. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1982 and by 50% by 1986.

  7. Fourth annual report to Congress on the Automotive Technology Development Program

    SciTech Connect

    Not Available

    1983-11-01

    Program implementation and management are described. The status of conventional power-train technology is described with respect to uniform charge reciprocating Otto engine, stratified charge reciprocating Otto engine, rotary Otto engine, diesel engine, and transmissions. The three tasks of the Automotive Technology Development Program are discussed as follows; automotive gas turbine project, automotive Stirling engine development project, and the heavy duty transport technology project.

  8. Geothermal drilling and completion technology development program. Annual progress report, October 1979-September 1980

    SciTech Connect

    Varnado, S.G.

    1980-11-01

    The progress, status, and results of ongoing research and development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1983 and by 50% by 1987.

  9. 2014 Annual Planning Summary for the Environmental Management Energy Technology Engineering Center

    Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2014 and 2015 within the Environmental Management Energy Technology Engineering Center.

  10. UNITED STATES DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2008

    SciTech Connect

    Bush, S.

    2009-11-05

    The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5

  11. Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    l j l l i j Volunteers Leading Technology A Case Study: Chewonk Renewab e Hydrogen Pro ect Pau Fau st ch, Pro ect Manager � j i � li � i � l � l � Agenda Pro ect Overv ew Accomp shments Fund ng Vo unteer Labor Acknow edgements What's Next j � i l i i i i � i lly i i fi i l i l Di i i i i � i i i l i i i l i i i i i i l l i Pro ect Overview: Goals St mu ate and support ex st ng Ma ne bus nesses, Create strateg ca mportant connect ons among rms nvo ved n the Renewab e Energy and

  12. Task 10 - technology development integration. Semi-annual report, April 1--September 30, 1996

    SciTech Connect

    Hendrikson, J.G.; Daly, D.J.

    1997-05-01

    The Energy and Environmental Research Center (EERC), in conjunction with the Waste Policy Institute (WPI), will identify and integrate new technologies to meet site-specific environmental management (EM) requirements at contaminated sites appropriate to U.S. Department of Energy (DOE) interests. This paper briefly reports overall progress for three activities: technology management, project management, and technology integration. Work performed over the reporting period has focused on providing logistical and administrative support. In addition, six monthly WPI reports to the EERC are included as appendices. The WPI reports contained detailed information for progress in each activity.

  13. 28. annual offshore technology conference: Proceedings. Volume 4: Field drilling and development systems

    SciTech Connect

    1996-12-31

    The 88 papers in this volume cover the following topics: Small operator implementation of subsea technology; Control system umbilicals, components and ROV interfacing; DeepStar--Results and plans; Deepwater subsea manifold systems; Drilling technology; Limit state design criteria for pipelines; Liuhua project; Mobile offshore drilling units; Offshore coiled tubing operations; Oman-India gas pipeline; Paraffin and hydrate control; Pompano--A deepwater subsea development; Severe operating conditions; Subsea production systems; and Well completions technology. Papers have been processed separately for inclusion on the data base.

  14. 27. Annual Offshore Technology Conference: 1995 Proceedings. Volume 4: Field drilling and development systems

    SciTech Connect

    1995-12-31

    This conference proceedings represents volume 4 of a four volume set of offshore oil and gas operation and development. This proceedings includes papers dealing with subsea flowlines and connectors; well completion practices; new technologies associated with subsea wellheads; multiphase flow pumping and flow meters; and materials testing procedures for well tubulars. It also has a section on the overall technology utilization in developing the offshore areas of Brazil and Norway.

  15. Largest Producer of Steel Products in the United States Achieves Significant Energy Savings at its Minntac Plant; Industrial Technologies Program (ITP) Save Energy Now (SEN) Case Study (Brochure)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Located at Mt. Iron on the Mesabi Iron Range in northern Minnesota, the U. S. Steel Minntac plant produces approxi- mately 14.5 million tons of taconite pellets annually. Largest Producer of Steel Products in the United States Achieves Significant Energy Savings at its Minntac Plant U. S. Steel's Taconite Pellet Manufacturing Facility Improves Process Heating Efficiency and Rejuvenates Energy Savings Strategy Following Save Energy Now Assessment Industrial Technologies Program Case Study

  16. Steam System Efficiency Optimized After J.R. Simplot Fertilizer Plant Receives Energy Assessment; Industrial Technologies Program (ITP) Save Energy Now (SEN) Case Study

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    J.R. Simplot Don plant in Pocatello, Idaho, repaired boiler feed water pumps such as the one pictured above, and revised boiler operating practices to reduce steam venting by 17 million pounds annually. Steam System Efficiency Optimized After J.R. Simplot Fertilizer Plant Receives Energy Assessment Industrial Technologies Program Case Study Key Findings * Significant energy savings can be achieved without large capital expenditures. * While the J.R. Simplot company had an active energy

  17. Oak Ridge National Laboratory Annual Progress Report for the Electric Drive Technologies Program

    SciTech Connect

    Ozpineci, Burak

    2015-10-01

    The US Department of Energy (DOE) announced in May 2011 a new cooperative research effort comprising DOE, the US Council for Automotive Research (composed of automakers Ford Motor Company, General Motors Company, and Chrysler Group), Tesla Motors, and representatives of the electric utility and petroleum industries. Known as U.S. DRIVE (Driving Research and Innovation for Vehicle efficiency and Energy sustainability), it represents DOE’s commitment to developing public–private partnerships to fund high-risk–high-reward research into advanced automotive technologies. The new partnership replaces and builds upon the partnership known as FreedomCAR (derived from “Freedom” and “Cooperative Automotive Research”) that ran from 2002 through 2010 and the Partnership for a New Generation of Vehicles initiative that ran from 1993 through 2001. Oak Ridge National Laboratory’s (ORNL’s) Electric Drive Technologies (EDT) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor (EM), and traction drive system (TDS) technologies that will leapfrog current on-the-road technologies, leading to lower cost and better efficiency in transforming battery energy to useful work. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency through research in more efficient TDSs. In supporting the development of advanced vehicle propulsion systems, the EDT subprogram fosters the development of technologies that will significantly improve efficiency, costs, and fuel economy

  18. Kelp biomass production: yield, genetics, and planting technology. Annual report, January 1983-August 1984. Technical report

    SciTech Connect

    Neushul, M.; Harger, B.W.W.

    1985-01-01

    Progress was made toward the long-term goal of growing macroalgae in the sea as a future source of substitute natural gas. The annual report discusses progress made to: (1) measure macroalgal yield, (2) enhance yield by row planting and selective harvesting, (3) genetically breed high-producing plants, (4) devise methods for planting kelps and (5) maintain and extend collaborative research efforts and communication with scientists working on macroalgal biomass production in Japan, China and elsewhere. The report discusses kelp biology and macroalgal mariculture in general terms, the theories that have been proposed and the existing data base in the scientific literature. Particular attention is given to new techniques used to make in-the-sea hydrodynamic and light-climate measurements and microspectrophotometric measurements of DNA levels in kelp sporophytes and gametophytes.

  19. Third annual report to Congress on the automotive technology development program

    SciTech Connect

    Not Available

    1982-03-01

    The Automotive Propulsion Research and Development Act of 1978 focused on advancing the technology of automotive propulsion systems. In formulating the Act, Congress found that: (1) existing automobiles do not meet the Nation's long-term environmental and energy goals; (2) insufficient resources are being devoted to research and development (R and D) on advanced automobile propulsion systems; (3) with sufficient R and D, alternatives to existing systems could meet long-term goals at reasonable cost; and (4) expanded R and D would complement and stimulate corresponding private sector efforts. Because of the Nation's energy problems, Congress felt that advanced automobile propulsion system technology should be developed quickly. Through the Act, Congress expressed its intent for the Department of Energy (DOE) to: (1) make R and D contracts and grants for development of advanced automobile propulsion systems within five years, or within the shortest practicable time consistent with appropriate R and D techniques; (2) evaluate and disseminate information about advanced automobile propulsion system technology; (3) preserve, enhance, and facilitate competition in R and D of existing and alternative automotive propulsion systems; and (4) supplement, but neither supplant nor duplicate, private industry R and D efforts. Summaries of the status of conventional powertrain technology, automotive technology development program, and the management plan and policy transition are given. Tables on contracts and grant procurement for advanced gas turbine engine systems, advanced Stirling engine systems, and the vehicle systems project are given. (WHK)

  20. Oak Ridge National Laboratory (ORNL) Superconducting Technology Program for electric power systems. Annual report for FY 1994

    SciTech Connect

    Koncinski, W.S.; Hawsey, R.A.

    1994-12-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The three major elements of this program are conductor development, applications development, and the Superconductivity Partnership Initiative. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1994 Annual Program Review held July 19--20, 2994. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to industrial competitiveness projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

  1. Ceramic technology report. Semi-annual progress report, April 1994--September 1994

    SciTech Connect

    Johnson, D.R.

    1995-06-01

    The Ceramic Technology Project was originally developed by the Department of Energy`s Office of Transportation Systems (OTS) in Energy Efficiency and Renewable Energy. This project, part of the OTS`s Materials Development Program, was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. In response to extensive input from industry, the plan is to extend the engine types which were previously supported (advanced gas turbine and low-heat-rejection diesel engines) to include near-term (5-10 years) applications in conventional automobile and diesel truck engines. To facilitate the rapid transfer of this technology to U.S. industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. A systematic approach to reducing the cost of components is envisioned. The work elements are as follows: economic cost modeling, ceramic machining, powder synthesis, alternative forming and densification processes, yield improvement, system design studies, standards development, low-expansion ceramics, and testing and data base development.

  2. Major Information Technology Business Case Guidance Technical Guidance For Performing the FY 2018

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Information Technology Business Case Guidance Technical Guidance For Performing the FY 2018 Information Technology Portfolio Submission August 2016 Page 1 Table of Contents 1 OMB Major IT Business Case ..................................................................................................... 2 1.1 Major IT Business Case Defined ................................................................................................ 2 1.2 CIO Evaluation

  3. Sybase Results: Database Technology Company Saves $262,000 Annually (Brochure)

    SciTech Connect

    Not Available

    2009-07-01

    This case study describes the steps Sybase, Inc. took to improve their data center efficiency and how they confirmed that DOE's DC Pro tools provide accurate estimates of potential energy savings.

  4. Proceedings of the 21st annual offshore technology conference. Volume 1

    SciTech Connect

    Not Available

    1989-01-01

    This book contains the proceedings of a conference on offshore technology. Topics covered include: underwater wet welding of higher strength offshore steels; the proposed extended-reach drilling project; North Sea experience with aluminum drillpipe; and load transfer mechanism to offshore jackets during pile driving.

  5. Exploratory technology research program for electrochemical energy storage. Annual report for 1995

    SciTech Connect

    Kinoshita, Kim

    1996-06-01

    The US DOE Office of Transportation Technologies provides support for an Electrochemical Energy Storage Program, that includes research and development (R&D) on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EV`s)and hybrid systems. The program centers on advanced electrochemical systems that offer the potential for high performance and low life- cycle costs, both of which are necessary to permit significant penetration into commercial markets. The DOE Electric Vehicle Technology Program is divided into two project areas: the US Advanced Battery Consortium (USABC) and Advanced battery R&D which includes the Exploratory Technology Research (ETR) program managed by the Lawrence Berkeley National Laboratory. The role of the ETR program is to perform supporting research on the advanced battery systems under development by the USABC and the Sandia Laboratories (SNL) Electric Vehicle Advanced Battery Systems (EVABS) program, and to evaluate new systems with potentially superior performance, durability and/of cost characteristics. The specific goal of the ETR program is to identify the most promising electrochemical technologies and development and scale-up. This report summarizes the research, financial and management activities relevant to the ETR program in CY 1995. This is a continuing program, and reports for prior years have been published; they are listed in this report.The general R&D areas addressed by the program include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, establishment of engineering principles applicable to electrochemical energy storage and conversion, and the development of fuel cell technology for transportation applications.

  6. UNITED STATES DEPARTMENT OF ENERGY WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2007

    SciTech Connect

    Bush, S

    2008-08-12

    The Office of Environmental Management's (EM) Roadmap, U.S. Department of Energy--Office of Environmental Management Engineering & Technology Roadmap (Roadmap), defines the Department's intent to reduce the technical risk and uncertainty in its cleanup programs. The unique nature of many of the remaining facilities will require a strong and responsive engineering and technology program to improve worker and public safety, and reduce costs and environmental impacts while completing the cleanup program. The technical risks and uncertainties associated with cleanup program were identified through: (1) project risk assessments, (2) programmatic external technical reviews and technology readiness assessments, and (3) direct site input. In order to address these needs, the technical risks and uncertainties were compiled and divided into the program areas of: Waste Processing, Groundwater and Soil Remediation, and Deactivation and Decommissioning (D&D). Strategic initiatives were then developed within each program area to address the technical risks and uncertainties in that program area. These strategic initiatives were subsequently incorporated into the Roadmap, where they form the strategic framework of the EM Engineering & Technology Program. The EM-21 Multi-Year Program Plan (MYPP) supports the goals and objectives of the Roadmap by providing direction for technology enhancement, development, and demonstrations that will lead to a reduction of technical uncertainties in EM waste processing activities. The current MYPP summarizes the strategic initiatives and the scope of the activities within each initiative that are proposed for the next five years (FY2008-2012) to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. As a result of the importance of reducing technical risk and uncertainty in the EM Waste Processing

  7. Direct conversion technology. Annual summary report CY 1991, January 1, 1991--December 31, 1991

    SciTech Connect

    Massier, P.F.; Back, L.H.; Ryan, M.A.; Fabris, G.

    1992-01-07

    The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. This report contains progress of research on the Alkali Metal Thermal-to-Electric Converter (AMTEC) and on the Two-Phase Liquid-Metal MHD Electrical Generator (LMMHD) for the period January 1, 1991 through December 31, 1991. Research on AMTEC and on LMMHD was initiated during October 1987. Reports prepared on previous occasions (Refs. 1--5) contain descriptive and performance discussions of the following direct conversion concepts: thermoelectric, pyroelectric, thermionic, thermophotovoltaic, thermoacoustic, thermomagnetic, thermoelastic (Nitionol heat engine); and also, more complete descriptive discussions of AMTEC and LMMHD systems.

  8. Exploratory technology research program for electrochemical energy storage, annual report for 1997

    SciTech Connect

    Kinoshita, K.

    1998-06-01

    The US Department of Energy`s (DOE) Office of Transportation Technologies provides support for an Electrochemical Energy Storage Program, that includes research and development on advanced rechargeable batteries. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EVs) and hybrid systems. The program centers on advanced electrochemical systems that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. The DOE Electric Vehicle Technology Program is divided into two project areas: the US Advanced Battery Consortium (USABC) and Advanced Battery R and D which includes the Exploratory Technology Research (ETR) Program managed by the Lawrence Berkeley National Laboratory (LBNL). The specific goal of the ETR Program is to identify the most promising electrochemical technologies and transfer them to the USABC, the battery industry and/or other Government agencies for further development and scale-up. This report summarizes the research, financial and management activities relevant to the ETR Program in CY 1997. This is a continuing program, and reports for prior years have been published; they are listed at the end of this Executive Summary. The general R and D areas addressed by the program include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, and establishment of engineering principles applicable to electrochemical energy storage. Major emphasis is given to applied research which will lead to superior performance and lower life-cycle costs.

  9. Exploratory technology research program for electrochemical energy storage. Annual report for 1996

    SciTech Connect

    Kinoshita, K. [ed.

    1997-06-01

    The U.S. Department of Energy`s Office of Transportation Technologies provides support for an Electrochemical Energy Storage Program, that includes research and development on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EVs) and hybrid systems. The program centers on advanced electrochemical systems that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. The DOE Electric Vehicle Technology Program is divided into two project areas: the United States Advanced Battery Consortium (USABC) and Advanced Battery R&D which includes the Exploratory Technology Research (ETR) Program managed by the Lawrence Berkeley National Laboratory (LBNL). The USABC, a tripartite undertaking between DOE, the U.S. automobile manufacturers and the Electric Power Research Institute (EPRI), was formed in 1991 to accelerate the development of advanced batteries for EVs. In addition, DOE is actively involved in the Partnership for a New Generation of Vehicles (PNGV) Program which seeks to develop passenger vehicles with a range equivalent to 80 mpg of gasoline. The role of the ETR Program is to perform supporting research on the advanced battery systems under development by the USABC and the PNGV Program, and to evaluate new systems with potentially superior performance, durability and/or cost characteristics. The specific goal of the ETR Program is to identify the most promising electrochemical technologies and transfer them to the USABC, the battery industry and/or other Government agencies for further development and scale-up. This report summarizes the research, financial and management activities relevant to the ETR Program in CY 1996. This is a continuing program, and reports for prior years have been published; they are listed at the end of this Executive Summary.

  10. Exploratory Technology Research Program for Electrochemical Energy Storage - Annual Report for 1998

    SciTech Connect

    Kinoshita, K.

    1999-06-01

    The US Department of Energy's (DOE) Office of Advanced Automotive Technologies conducts research and development on advanced rechargeable batteries for application in electric vehicles (EVs) and hybrid systems. Efforts are focused on advanced batteries that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. DOE battery R and D supports two major programs: the US Advanced Battery Consortium (USABC), which develops advanced batteries for EVS, and the Partnership for a New Generation of Vehicles (PNGV), which seeks to develop passenger vehicles with a fuel economy equivalent to 80 mpg of gasoline. This report describes the activities of the Exploratory Technology Research (ETR) Program, managed by the Lawrence Berkeley National Laboratory (LBNL). The role of the ETR Program is to perform supporting research on the advanced battery systems under development by the USABC and PNGV Programs, and to evaluate new systems with potentially superior performance, durability and/or cost characteristics. The specific goal of the ETR Program is to identify the most promising electrochemical technologies and transfer them to the USABC, the battery industry and/or other Government agencies for further development and scale-up. This report summarizes the research, financial and management activities relevant to the ETR Program in CY 1998. This is a continuing program, and reports for prior years have been published; they are listed at the end of this Program Summary.

  11. SETEC/Semiconductor Manufacturing Technologies Program: 1999 Annual and Final Report

    SciTech Connect

    MCBRAYER,JOHN D.

    2000-12-01

    This report summarizes the results of work conducted by the Semiconductor Manufacturing Technologies Program at Sandia National Laboratories (Sandia) during 1999. This work was performed by one working group: the Semiconductor Equipment Technology Center (SETEC). The group's projects included Numerical/Experimental Characterization of the Growth of Single-Crystal Calcium Fluoride (CaF{sub 2}); The Use of High-Resolution Transmission Electron Microscopy (HRTEM) Imaging for Certifying Critical-Dimension Reference Materials Fabricated with Silicon Micromachining; Assembly Test Chip for Flip Chip on Board; Plasma Mechanism Validation: Modeling and Experimentation; and Model-Based Reduction of Contamination in Gate-Quality Nitride Reactor. During 1999, all projects focused on meeting customer needs in a timely manner and ensuring that projects were aligned with the goals of the National Technology Roadmap for Semiconductors sponsored by the Semiconductor Industry Association and with Sandia's defense mission. This report also provides a short history of the Sandia/SEMATECH relationship and a brief on all projects completed during the seven years of the program.

  12. EM-54 Technology Development In Situ Remediation Integrated Program. Annual report

    SciTech Connect

    Not Available

    1993-08-01

    The Department of Energy (DOE) established the Office of Technology Development (EM-50) as an element of Environmental Restoration and Waste Management (EM) in November 1989. EM manages remediation of all DOE sites as well as wastes from current operations. The goal of the EM program is to minimize risks to human health, safety and the environment, and to bring all DOE sites into compliance with Federal, state, and local regulations by 2019. EM-50 is charged with developing new technologies that are safer, more effective and less expensive than current methods. The In Situ Remediation Integrated Program (the subject of this report) is part of EM-541, the Environmental Restoration Research and Development Division of EM-54. The In Situ Remediation Integrated Program (ISR IP) was instituted out of recognition that in situ remediation could fulfill three important criteria: Significant cost reduction of cleanup by eliminating or minimizing excavation, transportation, and disposal of wastes; reduced health impacts on workers and the public by minimizing exposure to wastes during excavation and processing; and remediation of inaccessible sites, including: deep subsurfaces; in, under, and around buildings. Buried waste, contaminated soils and groundwater, and containerized wastes are all candidates for in situ remediation. Contaminants include radioactive wastes, volatile and non-volatile organics, heavy metals, nitrates, and explosive materials. The ISR IP tends to facilitate development of in situ remediation technologies for hazardous, radioactive, and mixed wastes in soils, groundwater, and storage tanks. Near-term focus is on containment of the wastes, with treatment receiving greater effort in future years.

  13. Proceedings of the 21st annual offshore technology conference. Volume 3

    SciTech Connect

    Not Available

    1989-01-01

    This book discusses the papers presented at the conference on the subject of offshore technology. Some of the topics discussed were: Intervention and support of subsea equipment by remotely operated vehicles; the Economics and design impact of Standardized ROV and Diver interfaces on subsea completion systems; the Bullwinkle project; An overview; Submarine pipelines on-bottom stability: Recent AGA research; Fluid loads on pipelines: Sheltered or sliding; Dynamic response of submarine pipelines exposed to combined wave and current action; Hydrodynamic force characteristics for submarine pipelines; and Accuracy of offshore subsidence measurements with seabed pressure gauges and welding techniques sued for duplex stainless steel pipelines in the North Sea.

  14. Preparation of Nucleic Acid Libraries for Personalized Sequencing Systems Using an Integrated Microfluidic Hub Technology (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)

    ScienceCinema

    Patel, Kamlesh D [Ken]; SNL,

    2013-01-25

    Kamlesh (Ken) Patel from Sandia National Laboratories (Livermore, California) presents "Preparation of Nucleic Acid Libraries for Personalized Sequencing Systems Using an Integrated Microfluidic Hub Technology " at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

  15. Photovoltaic Czochralski silicon manufacturing technology improvements. Annual subcontract report, 1 April 1993--31 March 1994

    SciTech Connect

    Jester, T.

    1995-03-01

    This report describes work performed under a 3-year, 3-phase, cost-share contract to demonstrate significant cost reductions and improvements in manufacturing technology. The objective of the program is to reduce costs in photovoltaic manufacturing by approximately 10% per year. The work was focused in three main areas: (1) silicon crystal growth and thin wafer technology; (2) silicon cell processing; and (3) silicon module fabrication and environmental, safety, and health issues. During this reporting period, several significant improvements were achieved. The crystal growing operation improved significantly with an increase in growth capacity due to larger crucibles, higher polysilicon packing density, and high pull speeds. Wafer processing with wire saws progressed rapidly, and the operation is completely converted to wire saw wafer processing. The wire saws yield almost 50% more wafers per inch in production, thus improving manufacturing volume by 50% without any additional expense in crystal growth. Cell processing improvements focused on better understanding the contact paste and firing processes. Module designs for lower material and labor costs began with the focus on a new junction box, larger modules with larger cells, and a less costly framing technique. In addition, chlorofluorocarbon (CFC) usage was completely eliminated in the Siemens manufacturing facility during this period, resulting in significant reductions in the cost of caustic waste treatment.

  16. Exploratory Technology Research Program for electrochemical energy storage. Annual report fr 1994

    SciTech Connect

    Kinoshita, K.

    1995-09-01

    The US Department of Energy`s Office of Propulsion Systems provides support for an Electrochemical Energy Storage Program, that includes research and development (R&D) on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EVs). The program centers on advanced systems that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. The DOE Electrochemical Energy Storage Program is divided into two projects: the Electric Vehicle Advanced Battery Systems (EVABS) Development Program and the Exploratory Technology Research (ETR) Program. The general R&D areas addressed by the program include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, establishment of engineering principles applicable to electrochemical energy storage and conversion, and the development of air-system (fuel cell, metal/air) technology for transportation applications. Major emphasis is given to applied research which will lead to superior performance and lower life-cycle costs. The ETR Program is divided into three major program elements: Exploratory Research, Applied Science Research, and Air Systems Research. Highlights of each program element are summarized according to the appropriate battery system or electrochemical research area.

  17. Research on Captive Broodstock Technology for Pacific Salmon, 1995 Annual Report.

    SciTech Connect

    Swanson, Penny; Pascho, Ronald; Hershberger, William K.

    1996-01-01

    This report summarizes research on captive broodstock technologies conducted during 1995 under Bonneville Power Administration Project 93-56. Investigations were conducted by the National Marine Fisheries Service (NMFS) in cooperation with the US Fish and Wildlife Service, University of Washington, and Northwest Biological Science Center (US Geological Survey). Studies encompassed several categories of research, including fish husbandry, reproductive physiology, immunology, pathology, nutrition, and genetics. Captive broodstock programs are being developed and implemented to aid recovery of endangered Pacific salmon stocks. Like salmon hatchery programs, however, captive broodstock programs are not without problems and risks to natural salmon populations. The research projects described in this report were developed in part based on a literature review, Assessment of the Status of Captive Broodstock Technology for Pacific Salmon. The work was divided into three major research areas: (1) research on sockeye salmon; (2) research on spring chinook salmon; and (3) research on quantitative genetic problems associated with captive broodstock programs. Investigations of nutrition, reproductive physiology, fish husbandry, and fish health were integrated into the research on sockeye and spring chinook salmon. A description of each investigation and its major findings and conclusions is presented.

  18. Rocky Flats Environmental Technology Site Ecological Monitoring Program 1995 annual report

    SciTech Connect

    1995-05-31

    The Ecological Monitoring Program (ECMP) was established at the Rocky Flats Environmental Technology Site (Site) in September 1992. At that time, EcMP staff developed a Program Plan that was peer-reviewed by scientists from western universities before submittal to DOE RFFO in January 1993. The intent of the program is to measure several quantitative variables at different ecological scales in order to characterize the Rocky Flats ecosystem. This information is necessary to document ecological conditions at the Site in impacted and nonimpacted areas to determine if Site practices have had ecological impacts, either positive or negative. This information can be used by managers interested in future use scenarios and CERCLA activities. Others interested in impact analysis may also find the information useful. In addition, these measurements are entered into a database which will serve as a long-term information repository that will document long-term trends and potential future changes to the Site, both natural and anthropogenic.

  19. The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2000

    SciTech Connect

    National Energy Technology Laboratory

    2001-11-27

    This Site Environmental Report was prepared by the Environment, Safety, and Health Division at the National Energy Technology Laboratory (NETL) for the U.S. Department of Energy. The purpose of this report is to inform the public and Department of Energy stakeholders of the environmental conditions at the NETL sites in Morgantown, West Virginia, and Pittsburgh, Pennsylvania. This report contains the most accurate information that could be collected during the period between January 1, 2000, through December 31, 2000. As stated in DOE Orders 5400.1 and 231.1, the purpose of the report is to: Characterize site environmental management performance; Confirm compliance with environmental standards and requirements and Highlight significant facility programs and efforts.

  20. The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2002

    SciTech Connect

    National Energy Technology Laboratory

    2003-10-30

    This Site Environmental Report was prepared by the Environmental, Safety, and Health Division at the National Energy Technology Laboratory (NETL) for the U.S. Department of Energy. The purpose of this report is to inform the public and Department of Energy stakeholders of the environmental conditions at NETL sites in Morgantown (MGN), West Virginia, Pittsburgh (PGH), Pennsylvania, Tulsa, Oklahoma, and Fairbanks, Alaska. This report contains the most accurate information that could be collected during the period between January 1, 2002, and December 31, 2002. As stated in DOE Orders 450.1 and 231.1, the purpose of the report is to: (1) Characterize site environmental management performance. (2) Confirm compliance with environmental standards and requirements. (3) Highlight significant facility programs and efforts.

  1. Spent Fuel and Waste Management Technology Development Program. Annual progress report

    SciTech Connect

    Bryant, J.W.

    1994-01-01

    This report provides information on the progress of activities during fiscal year 1993 in the Spent Fuel and Waste Management Technology Development Program (SF&WMTDP) at the Idaho Chemical Processing Plant (ICPP). As a new program, efforts are just getting underway toward addressing major issues related to the fuel and waste stored at the ICPP. The SF&WMTDP has the following principal objectives: Investigate direct dispositioning of spent fuel, striving for one acceptable waste form; determine the best treatment process(es) for liquid and calcine wastes to minimize the volume of high level radioactive waste (HLW) and low level waste (LLW); demonstrate the integrated operability and maintainability of selected treatment and immobilization processes; and assure that implementation of the selected waste treatment process is environmentally acceptable, ensures public and worker safety, and is economically feasible.

  2. Exploratory Technology Research Program for electrochemical energy storage: Annual report for 1993

    SciTech Connect

    Kinoshita, K.

    1994-09-01

    The U.S. Department of Energy`s Office of Propulsion Systems provides support for an Electrochemical Energy Storage Program, that includes research and development (R&D) on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EVs). The program centers on advanced systems that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. The DOE Electrochemical Energy Storage Program is divided into two projects: the Electric Vehicle Advanced Battery Systems (EVABS) Development Program and the Exploratory Technology Research (ETR) Program. The EVABS Program management responsibility has been assigned to Sandia National Laboratories (SNL); Lawrence Berkeley Laboratory (LBL) is responsible for management of the ETR Program. The EVABS and ETR Programs include an integrated matrix of R&D efforts designed to advance progress on selected candidate electrochemical systems. The United States Advanced Battery Consortium (USABC), a tripartite undertaking between DOE, the U.S. automobile manufacturers and the Electric Power Research Institute (EPRI), was formed in 1991 to accelerate the development of advanced batteries for consumer EVs. The role of the FIR Program is to perform supporting research on the advanced battery systems under development by the USABC and EVABS Program, and to evaluate new systems with potentially superior performance, durability and/or cost characteristics. The specific goal of the ETR Program is to identify the most promising electrochemical technologies and transfer them to the USABC, the battery industry and/or the EVABS Program for further development and scale-up. This report summarizes the research, financial and management activities relevant to the ETR Program in CY 1993.

  3. Technology Deployment Featured Case Studies | Department of Energy

    Energy Saver

    Price Parity | Department of Energy Technology Advances Needed for Photovoltaics to Achieve Widespread Grid Price Parity Technology Advances Needed for Photovoltaics to Achieve Widespread Grid Price Parity Abstract: To quantify the potential value of technological advances to the photovoltaics (PV) sector, this paper examines the impact of changes to key PV systems parameters on the levelized cost of energy (LCOE). The parameters selected include module manufacturing cost, efficiency,

  4. CIS photovoltaic technology. Annual technical report, January 12, 1995--January 11, 1996

    SciTech Connect

    Delahoy, A.E.; Britt, J.S.; Gabor, A.M.

    1996-06-01

    EPV`s overall strategy in developing CIGS photovoltaic technology has been to define and construct a flexible set of large area vacuum deposition equipment and to explore CIGS formation recipes that can be implemented on this equipment. This is the inverse of the conventional approach in which manufacturing techniques are sought that can reproduce a high efficiency laboratory scale process over large areas. A feature of this equipment is the use of proprietary linear sources capable of downwards evaporation. Using recipes generated within this program, CIGS cells with efficiencies up to 13.9% were prepared by EPV under a separate CRADA with NREL. Entirely within this program, an aperture area efficiency of 9.6% was achieved for a laminated submodule of area 135.2 cm{sup 2}. Considerable effort has gone into the preparation and characterization of CIGS prepared on substrates measuring 96.5 cm x 44.5 cm, and good compositional uniformity has been achieved along both the short and long directions of the plate. Despite this, the material has not yet achieved the efficiency levels demonstrated in smaller scale equipment, and recipe development is ongoing. As part of a program to eliminate, if possible, the use of CdS, alternative buffer layers such as InSe, In{sub x}S{sub y}, and ZnSe have been explored, and, to gain insight into junction formation, CdSe. Of these compounds, ZnSe has shown the most promise, and further experiments are being conducted to optimize material and device properties.

  5. Annual Reports - SRSCRO

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    reports Annual Reports Annual Report 2015 Annual Report 2014 Annual Report 2013 Annual Report 2012 Annual Report 2011 Annual Report 2010 Annual Report 2009 Annual Report 2008...

  6. Annual Site Environmental Report

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2014 Annual Site Environmental Report Updated July 24, 2015 NETL's Annual Site Environmental Report for 2014 -ii- 2014 Annual Site Environmental Report September 9, 2015 U.S. Department of Energy National Energy Technology Laboratory Albany, Oregon Anchorage, Alaska Morgantown, West Virginia Pittsburgh, Pennsylvania Sugar Land, Texas NETL's Annual Site Environmental Report for 2014 -iii- Disclaimer This report was prepared as an account of work sponsored by an agency of the U.S. Government.

  7. Vehicle Technologies Office: 2008 Oak Ridge Transportation Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Oak Ridge Transportation Technology Program Annual Report Vehicle Technologies Office: 2008 Oak Ridge Transportation Technology Program Annual Report ornlttpreportfy08.pdf (4.58 ...

  8. 2014 Annual Merit Review Results Report - Fuels & Lubricants...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fuels & Lubricants Technologies 2014 Annual Merit Review Results Report - Fuels & Lubricants Technologies Merit review of DOE Vehicle Technologies research activities ...

  9. Technology Solutions for New Homes Case Study: Multifamily Zero...

    Energy Saver

    Case Study: Multifamily Zero Energy Ready Home Analysis AvalonBay Communities, which is a large multifamily ... planned to be certified to the ENERGY STAR Homes Version 3 program. ...

  10. Metlab Plan-Wide Assessment. Office of Industrial Technologies (OIT) BestPractices Assessment Case Study

    SciTech Connect

    Not Available

    2002-08-01

    This OIT BestPractices case study describes the methods and results of a plant-wide energy assessment at Metlab's aircraft component manufacturing plant in Wyndmoor, PA. Recommendations derived from the assessment, if implemented, can save an estimated $528,400 annually, reduce natural gas use by 50,070 MMbtu per year, and reduce electrical use by 329,400 kWh per year.

  11. Annual Planning Summaries: 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4 Annual Planning Summaries: 2014 January 20, 2014 2014 Annual Planning Summary for the Environmental Management Energy Technology Engineering Center The ongoing and projected...

  12. Technology Solutions Case Study: Moisture Management of High-Walls

    SciTech Connect

    2013-12-01

    Moisture management of high-R walls is important to ensure optimal performance. This case study, developed by Building America team Building Science Corporation, focuses on how eight high-R walls handle the three main sources of moistureconstruction moisture, air leakage condensation, and bulk water leaks.

  13. 2010 Annual Merit Review Results Summary

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    10 Annual Merit Review, Vehicle Technologies Program I-2 Table of Contents Introduction .......................................................................................................................................................................................... I-3 Hybrid and Vehicle Systems Technologies ........................................................................................................................................ 1-1 Energy Storage Technologies

  14. 2011 Annual Merit Review Results Report - Hybrid and Vehicle...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1 Annual Merit Review Results Report - Hybrid and Vehicle Systems Technologies 2011 Annual Merit Review Results Report - Hybrid and Vehicle Systems Technologies Merit review of DOE ...

  15. Annual Merit Review Evaluates Impact of Sustainable Transportation...

    Energy Saver

    at the Vehicle Technologies Office and Hydrogen and Fuel Cells Program Annual Merit ... at the Vehicle Technologies Office and Hydrogen and Fuel Cells Program Annual Merit ...

  16. 2014 Annual Merit Review Results Report - Hybrid Vehicle Systems

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies | Department of Energy Report - Hybrid Vehicle Systems Technologies 2014 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies Merit review of DOE Vehicle Technologies research activities 2014_amr_01.pdf (10.42 MB) More Documents & Publications 2014 Annual Merit Review Results Report 2013 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies 2013 Annual Merit Review Results Report

  17. Annual Energy Outlook 2015 - Appendix A

    Gasoline and Diesel Fuel Update

    Administration | Annual Energy Outlook 2015 Reference case Energy Information Administration Annual Energy Outlook 2015 Table A15. Coal supply, disposition, and prices ...

  18. 2014 Annual Merit Review Results Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report 2014 Annual Merit Review Results Report 2014 Annual Merit Review, Vehicle Technologies Office, complete report 2014_amr.pdf (45.96 MB) More Documents & Publications 2014 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies 2013 Annual Merit Review Results Report 2013 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies

  19. 2003 Annual Merit Review Proceedings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Annual Merit Review Proceedings 2003 Annual Merit Review Proceedings The DOE Fuel Cell Technologies Office held their 2003 Annual Merit Review Meeting May 18-22, 2003, in Berkeley, California. View the Proceedings of the 2003 Annual Merit Review Meeting.

  20. Technology installation review. A case study on energy-efficient technologies

    SciTech Connect

    Baxter, Van

    2001-12-31

    The purpose of this Technology Installation Review is to provide an overview of hybrid geothermal heat pump systems. It presents the results of recent research on these systems, looks at system types, energy savings, maintenance considerations, and measured technology performance from several examples. Using the ground as a thermal energy source and/or a heat sink for heat pumps has long been recognized to have a number of advantages over the similar use of ambient air. Ground temperatures at about 3-ft depth or lower are much less variable than ambient air temperatures. Further, soil or rock at these depths is usually warmer than ambient air during the coldest winter months and cooler than ambient air during the summer months. This fact leads directly to cooler condensation temperatures (during cooling operation) and warmer evaporating temperatures (during heating) for a heat pump with consequent improved energy efficiency. It also results in increased heating and cooling capacity at extreme temperatures, thereby reducing or eliminating the need for auxiliary heat.

  1. Engineering Evaluation Report on K-311-1 Floor Subsidence (2008 Annual Report) at the East Tennessee Technology Park, Oak Ridge, Tennessee

    SciTech Connect

    Knott R.B.

    2008-11-13

    The purpose of this task is to evaluate the effect of floor settlement on building structure, piping, and equipment foundations between column lines 1 and 2 and B and K of Bldg. K-311-1 (see Fig. A-1 in Appendix A) at East Tennessee Technology Park (ETTP), Oak Ridge, Tennessee. Revision 0 of this document covers the 2005 annual inspection. Revision 1 addresses the 2006 annual inspection, Revision 2 addresses the 2007 annual inspection, and Revision 3 covers the 2008 annual inspection, as indicated by the changed report title. A civil survey and visual inspection were performed. Only a representative number of points were measured during the 2008 survey. The exact location of a number of survey points in Table A-1 could not be accurately determined in the 2008 survey since these points had not been spray painted since 2003. The points measured are deemed adequate to support the conclusions of this report. Based on the survey and observations, there has been no appreciable change in the condition of the unit since the 2007 inspection. The subsidence of the floor presents concerns to the building structure due to the possible indeterminate load on the pipe gallery framing. Prior to demolition activities that involve the piping or removal of the equipment, such as vent, purge and drain and foaming, engineering involvement in the planning is necessary. The piping connected to the equipment is under stress, and actions should be implemented to relieve this stress prior to disturbing any of the equipment or associated piping. In addition, the load on the pipe gallery framing needs to be relieved prior to any activities taking place in the pipe gallery. Access to this area and the pipe gallery is not allowed until the stress is released.

  2. Technology Solutions for New Homes Case Study: Southern Energy Homes, First

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOE Zero Energy Ready Manufactured Home | Department of Energy Solutions for New Homes Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home Technology Solutions for New Homes Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home The country's first Zero Energy Ready manufactured home that is certified by the U.S. Department of Energy (DOE) is up and running in Russellville, Alabama. Southern Energy Homes, First DOE Zero Energy Ready

  3. Stanford Geothermal Workshop 2012 Annual Meeting

    Energy.gov [DOE]

    Presentation slides for the Stanford Geothermal Workshop Annual Meeting presentation by Doug Hollett, Geothermal Technologies Program Manager

  4. 2012 Annual Planning Summary for Fossil Energy, National Energy Technology Laboratory, RMOTC, and Strategic Petroleum Reserve Field Office

    Energy.gov [DOE]

    The ongoing and projected Environmental Assessments and Environmental Impact Statements for 2012 and 2013 within Fossil Energy, National Energy Technology Laboratory, RMOTC, and Strategic Petroleum Reserve Field Office.

  5. 2004 Office of Fossil Energy Fuel Cell Program Annual Report

    SciTech Connect

    NETL

    2004-11-01

    Annual report of fuel cell projects sponsored by Department of Energy, National Energy Technology Laboratory.

  6. Reservoir technology - geothermal reservoir engineering research at Stanford. Fifth annual report, October 1, 1984-September 30, 1985

    SciTech Connect

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.

    1985-09-01

    The objective is to carry out research on geothermal reservoir engineering techniques useful to the geothermal industry. A parallel objective is the training of geothermal engineers and scientists. The research is focused toward accelerated development of hydrothermal resources through the evaluation of fluid reserves, and the forecasting of field behavior with time. Injection technology is a research area receiving special attention. The program is divided into reservoir definition research, modeling of heat extraction from fractured reservoirs, application and testing of new and proven reservoir engineering technology, and technology transfer. (ACR)

  7. Annual Report on Technology Transfer and Related Technology Partnering Activities at the National Laboratories and Other Facilities FY 2009-2013

    Office of Energy Efficiency and Renewable Energy (EERE)

    During the reporting period (2009-13), DOE has developed a sharpened focus on technology transfer activities, with a broader definition and commitment to continuously improving the Department’s...

  8. The Historically Black Colleges and Universities/Minority Institutions Environmental Technology Consortium annual report, 1991--1992

    SciTech Connect

    1992-12-31

    The member institutions of the Consortium continue to play a significant role in increasing the number of African Americans who enter the environmental professions through the implementation of the Consortium`s RETT Plan for Research, Education, and Technology Transfer. The four major program areas identified in the RETT Plan are as follows: (1) minority outreach and precollege education; (2) undergraduate education and postsecondary training; (3) graduate and postgraduate education and research; and (4) technology transfer.

  9. Vehicle Technologies Office: 2009 Advanced Power Electronics...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Power Electronics R&D Annual Progress Report Vehicle Technologies Office: 2009 Advanced Power Electronics R&D Annual Progress Report Annual report focusing on understanding and ...

  10. Integration of Sustainability Metrics into Design Cases and State of Technology Assessments

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    This presentation does not contain any proprietary, confidential, or otherwise restricted information DOE Bioenergy Technologies Office (BETO) 2015 Project Peer Review Integration of Sustainability Metrics into Design Cases and State of Technology Assessments 2.1.0.100/2.1.0.302 NREL 2.1.0.301 PNNL Mary Biddy On behalf Eric Tan, Abhijit Dutta, Ryan Davis, Mike Talmadge NREL Lesley Snowden-Swan On behalf of Sue Jones, Aye Meyer, Ken Rappe, Kurt Spies PNNL Goal Statement 2 Support the development

  11. Technology Validation

    Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  12. The Historically Black Colleges and Universities/Minority Institutions Environmental Technology and Waste Management Consortium annual report, 1990--1991

    SciTech Connect

    1991-12-31

    The HBCU/MI Environmental Technology and Waste Management Consortium was established in January 1990, through a Memorandum of Understanding (MOU) among the member institutions. This group of research-oriented Historically Black Colleges and Universities and Minority Institutions (HBCU/MI) agreed to work together to initiate research, technology development and education programs to address the nation`s critical environmental problems. As a group the HBCU/MI Consortium is uniquely positioned to reach women and the minority populations of African Americans, Hispanics and American Indians. As part of their initial work, they developed the Research, Education, and Technology Transfer (RETT) Plan to actualize the Consortium`s guiding principles. In addition to developing a comprehensive research agenda, four major programs were begun to meet these goals. This report summarizes the 1990--1991 progress.

  13. 2008 Annual Merit Review Results Summary | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    08 Annual Merit Review Results Summary 2008 Annual Merit Review Results Summary DOE Vehicle Technologies Annual Merit Review 2008_merit_review.pdf (22.4 MB) More Documents & Publications 2008 Annual Merit Review Results Summary - 3. Battery Development, Testing, Simulation, Analysis 2008 Annual Merit Review Results Summary - 1. Plenary Session 2008 Annual Merit Review Results Summary - 2. Applied Battery Research

  14. Technology Solutions for New Homes Case Study: Indirect Solar Water Heating

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Systems in Single-Family Homes | Department of Energy Indirect Solar Water Heating Systems in Single-Family Homes Technology Solutions for New Homes Case Study: Indirect Solar Water Heating Systems in Single-Family Homes In 2011, Rural Development, Inc. (RDI) completed the construction of Wisdom Way Solar Village (WWSV), which is a development of 20 very efficient homes in Greenfield, Massachusetts. The homes feature R-40 walls, triple-pane windows, R-50 attic insulation, and airtight

  15. Annual Performance Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Annual Performance Reports Annual Performance Reports The Annual Performance Report provides key performance information that demonstrates DOE's accountability to ensure America's security and prosperity by addressing its energy, environmental, and nuclear challenges through transformative science and technology solutions. These reports are produced as an alternative to the Performance and Accountability Report. Documents Available for Download March 29, 2016 FY 2015 Annual Performance Report

  16. 2008 Annual Merit Review Results Summary - Introduction | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Introduction 2008 Annual Merit Review Results Summary - Introduction DOE Vehicle Technologies Annual Merit Review 2008meritreviewintro.pdf (81.4 KB) More Documents & ...

  17. 2008 Annual Merit Review Results Summary - Cover and Table of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Cover and Table of Contents 2008 Annual Merit Review Results Summary - Cover and Table of Contents DOE Vehicle Technologies Annual Merit Review 2008meritreviewcontents.pdf ...

  18. 2008 Annual Merit Review Results Summary - 14. Vehicle Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4. Vehicle Systems and Simulation 2008 Annual Merit Review Results Summary - 14. Vehicle Systems and Simulation DOE Vehicle Technologies Annual Merit Review 2008meritreview14.pd...

  19. 2008 Annual Merit Review Results Summary - Disclaimer and Back...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Disclaimer and Back Cover 2008 Annual Merit Review Results Summary - Disclaimer and Back Cover DOE Vehicle Technologies Annual Merit Review 2008meritreviewback.pdf (139.05 KB) ...

  20. 2008 Annual Merit Review Results Summary - 17. Acronyms | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    7. Acronyms 2008 Annual Merit Review Results Summary - 17. Acronyms DOE Vehicle Technologies Annual Merit Review 2008meritreview17.pdf (164.46 KB) More Documents & Publications ...

  1. 2012 Annual Merit Review Results Report - Introduction | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    amr.pdf (47.5 MB) More Documents & Publications 2012 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies 2011 Annual Merit Review Results Report - Hybrid and ...

  2. 2012 Annual Merit Review Results Report - Introduction | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (136.42 KB) More Documents & Publications DOE Vehicle Technologies Program 2009 Merit Review Report 2011 Annual Merit Review Results Report 2010 Annual Merit Review Results Summary

  3. 2008 Annual Merit Review Results Summary - 13. Health Impacts...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3. Health Impacts 2008 Annual Merit Review Results Summary - 13. Health Impacts DOE Vehicle Technologies Annual Merit Review 2008meritreview13.pdf (363.3 KB) More Documents & ...

  4. 2008 Annual Merit Review Results Summary - 6. Solid State Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    6. Solid State Energy Conversion 2008 Annual Merit Review Results Summary - 6. Solid State Energy Conversion DOE Vehicle Technologies Annual Merit Review 2008meritreview6.pdf ...

  5. 2008 Annual Merit Review Results Summary - 11. Lightweight Materials...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1. Lightweight Materials 2008 Annual Merit Review Results Summary - 11. Lightweight Materials DOE Vehicle Technologies Annual Merit Review 2008meritreview11.pdf (3.67 MB) More ...

  6. 2008 Annual Merit Review Results Summary - 12. Propulsion Materials...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2. Propulsion Materials 2008 Annual Merit Review Results Summary - 12. Propulsion Materials DOE Vehicle Technologies Annual Merit Review 2008meritreview12.pdf (2.52 MB) More ...

  7. 2008 Annual Merit Review Results Summary - 15. Deployment | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    5. Deployment 2008 Annual Merit Review Results Summary - 15. Deployment DOE Vehicle Technologies Annual Merit Review 2008meritreview15.pdf (641.05 KB) More Documents & ...

  8. 2008 Annual Merit Review Results Summary - 1. Plenary Session...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    . Plenary Session 2008 Annual Merit Review Results Summary - 1. Plenary Session DOE Vehicle Technologies Annual Merit Review 2008meritreview1.pdf (300.51 KB) More Documents & ...

  9. 2011 Annual Merit Review Results Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    More Documents & Publications DOE Vehicle Technologies Program 2009 Merit Review Report 2012 Annual Merit Review Results Report - Introduction 2010 Annual Merit Review Results ...

  10. 2008 Annual Merit Review Results Summary - 9. Emission Control...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    9. Emission Control and Aftertreatment 2008 Annual Merit Review Results Summary - 9. Emission Control and Aftertreatment DOE Vehicle Technologies Annual Merit Review ...

  11. 2016 DOE Annual Merit Review and Peer Evaluation Meeting Coming...

    Energy.gov [DOE] (indexed site)

    Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation ... 2015 DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Report ...

  12. 2008 Annual Merit Review Results Summary - 4. Exploratory Battery...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4. Exploratory Battery Research 2008 Annual Merit Review Results Summary - 4. Exploratory Battery Research DOE Vehicle Technologies Annual Merit Review 2008meritreview4.pdf ...

  13. 2008 Annual Merit Review Results Summary - 7. Combustion Research...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    7. Combustion Research 2008 Annual Merit Review Results Summary - 7. Combustion Research DOE Vehicle Technologies Annual Merit Review 2008meritreview7.pdf (1.84 MB) More ...

  14. 2011 Annual Planning Summary for Brookhaven Site Office (BHSO...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (BHSO) More Documents & Publications 2011 Annual Planning Summary for Fermi Site Office (FSO) 2012 Annual Planning Summary for Fossil Energy, National Energy Technology Laboratory,...

  15. 2008 Annual Merit Review Results Summary - 5. Advanced Power...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    5. Advanced Power Electronics 2008 Annual Merit Review Results Summary - 5. Advanced Power Electronics DOE Vehicle Technologies Annual Merit Review 2008meritreview5.pdf (1.26 ...

  16. Utility advanced turbine systems (ATS) technology readiness testing -- Phase 3. Annual report, October 1, 1996--September 30, 1997

    SciTech Connect

    1997-12-31

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

  17. Cast polycrystalline silicon photovoltaic cell and module manufacturing technology improvements. Annual subcontract report, 1 December 1993--30 November 1994

    SciTech Connect

    Wohlgemuth, J.

    1995-09-01

    This report describes work performed under a 3-y contract to advance Solarex`s cast polycrystalline silicon manufacturing technology, reduce module production cost, increase module performance, and expand Solarex`s commercial production capacities. Specific objectives are to reduce manufacturing cost for polycrstalline silicon PV modules to less than $1.20/W and to increase manufacturing capacity by a factor of 3. Solarex is working on casting, wire saws, cell process, module assembly, frameless module development, and automated cell handling.

  18. The Historically Black Colleges and Universities/Minority Institutions Environmental Technology Consortium annual report 1994--1995

    SciTech Connect

    1998-07-01

    The HBCU/MI ET Consortium was established in January 1990, through a Memorandum of Understanding (MOU) among its member institutions. This group of research oriented Historically Black Colleges and Universities and Minority Institutions (HBCU/MIs) agreed to work together to initiate or revise education programs, develop research partnerships with public and private sector organizations, and promote technology development to address the nation`s critical environmental contamination problems. The Consortium`s Research, Education and Technology Transfer (RETT) Plan became the working agenda. The Consortium is a resource for collaboration among the member institutions and with federal an state agencies, national and federal laboratories, industries, (including small businesses), majority universities, and two and four-year technical colleges. As a group of 17 institutions geographically located in the southern US, the Consortium is well positioned to reach a diverse group of women and minority populations of African Americans, Hispanics and American Indians. This Report provides a status update on activities and achievements in environmental curriculum development, outreach at the K--12 level, undergraduate and graduate education, research and development, and technology transfer.

  19. 2011 Annual Merit Review Results Report - Hybrid and Vehicle...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hybrid and Vehicle Systems Technologies 2011 Annual Merit Review Results Report - Hybrid and Vehicle Systems Technologies Merit review of DOE Vehicle Technologies research ...

  20. 2013 Annual Merit Review Results Report - Hybrid Vehicle Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report - Hybrid Vehicle Systems Technologies 2013 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies Merit review of DOE Vehicle Technologies research ...

  1. 2014 Annual Merit Review Results Report - Hybrid Vehicle Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hybrid Vehicle Systems Technologies 2014 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies Merit review of DOE Vehicle Technologies research activities ...

  2. 2012 Annual Merit Review Results Report - Hybrid Vehicle Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hybrid Vehicle Systems Technologies 2012 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies Merit review of DOE Vehicle Technologies research activities ...

  3. 2014 Annual Merit Review Results Report - Advanced Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Advanced Combustion Engine Technologies 2014 Annual Merit Review Results Report - Advanced Combustion Engine Technologies Merit review of DOE Vehicle Technologies research ...

  4. 2013 Annual Merit Review Results Report - Advanced Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Advanced Combustion Engine Technologies 2013 Annual Merit Review Results Report - Advanced Combustion Engine Technologies Merit review of DOE Vehicle Technologies research ...

  5. 2011 Annual Merit Review Results Report - Advanced Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Advanced Combustion Engine Technologies 2011 Annual Merit Review Results Report - Advanced Combustion Engine Technologies Merit review of DOE Vehicle Technologies research ...

  6. A case for Sandia investment in complex adaptive systems science and technology.

    SciTech Connect

    Colbaugh, Richard; Tsao, Jeffrey Yeenien; Johnson, Curtis Martin; Backus, George A.; Brown, Theresa Jean; Jones, Katherine A.

    2012-05-01

    This white paper makes a case for Sandia National Laboratories investments in complex adaptive systems science and technology (S&T) -- investments that could enable higher-value-added and more-robustly-engineered solutions to challenges of importance to Sandia's national security mission and to the nation. Complex adaptive systems are ubiquitous in Sandia's national security mission areas. We often ignore the adaptive complexity of these systems by narrowing our 'aperture of concern' to systems or subsystems with a limited range of function exposed to a limited range of environments over limited periods of time. But by widening our aperture of concern we could increase our impact considerably. To do so, the science and technology of complex adaptive systems must mature considerably. Despite an explosion of interest outside of Sandia, however, that science and technology is still in its youth. What has been missing is contact with real (rather than model) systems and real domain-area detail. With its center-of-gravity as an engineering laboratory, Sandia's has made considerable progress applying existing science and technology to real complex adaptive systems. It has focused much less, however, on advancing the science and technology itself. But its close contact with real systems and real domain-area detail represents a powerful strength with which to help complex adaptive systems science and technology mature. Sandia is thus both a prime beneficiary of, as well as potentially a prime contributor to, complex adaptive systems science and technology. Building a productive program in complex adaptive systems science and technology at Sandia will not be trivial, but a credible path can be envisioned: in the short run, continue to apply existing science and technology to real domain-area complex adaptive systems; in the medium run, jump-start the creation of new science and technology capability through Sandia's Laboratory Directed Research and Development program; and

  7. The Historically Black Colleges and Universities/Minority Institutions Environmental Technology Consortium annual report, 1992--1993

    SciTech Connect

    1993-12-31

    The HBCU/MI Consortium was formed (1) to respond to national R and D, policy formulation and minority manpower needs in environmental technology, hazardous, solid and mixed waste materials management, environmental restoration, and environmental health; and (2) to address limited minority participation in the public, private and non-profit environmental industries; limited environmental awareness among minorities; minimal interaction between HBCUs/MIs and majority universities, industry and interest groups; limited institutional development in environmental education and research; and lack of minority technical businesses in the environmental industry. This report gives progress made for the 92--93 period.

  8. EIA - Annual Energy Outlook 2016

    Energy Information Administration (EIA) (indexed site)

    Annual Energy Outlook 2016 Full Release Date: September 15, 2016 | Next Early Release Date: January 2017 | full report Overview Data Reference Case Side Cases Interactive Table Viewer By Section Issues in Focus Market Trends Executive Summary Legislation and Regulations Comparison with Other Projections Appendices Annual Energy Outlook 2016 presents yearly projections and analysis of energy topics Download the AEO2016 Report Projections in the Annual Energy Outlook 2016 (AEO2016) focus on the

  9. Silicon-film{trademark} photovoltaic manufacturing technology. Annual subcontract report, 15 January 1992--15 November 1992

    SciTech Connect

    Bottenberg, W.R.; Hall, R.B.; Jackson, E.L.; Lampo, S.; Mulligan, W.P.; Barnett, A.M.

    1994-02-01

    This report describes work under a subcontract to upgrade AstroPower, Inc.`s facility to produce 1.22-m{sup 2} Silicon-Film{trademark} PV modules with an output of 170 W{sub p}. The focus for the first year of the PVMaT Phase 2A project is to establish the baseline process capability and optimize the performance of the present machine. This first year`s activities accelerated the advance of Silicon-Film{trademark} manufacturing technology in several ways. First, the project led directly to plans to make an early introduction of a large solar cell product. The successful fabrication of 646-cm{sup 2} wafers and solar cells paved the way for dramatically increasing the power output per solar cell. Second was the establishment of a basis for the design and construction of a 2.4-MW/yr wafer machine. Another important contribution was the determination of the importance of H{sup +} implantation processes for polycrystalline silicon technologies.

  10. Benchmarking of Competitive Technologies

    Energy.gov [DOE]

    2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

  11. Technology Integration Overview

    Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  12. Consumer Vehicle Technology Data

    Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  13. Carbon Fiber Technology Facility

    Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  14. 2013 Annual Merit Review Results Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report 2013 Annual Merit Review Results Report 2013 Annual Merit Review, Vehicle Technologies Office 2013amr.pdf (49.99 MB) More Documents & Publications 2013 Annual Merit Review ...

  15. Technologies

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technologies Technologies Scientists and engineers at Los Alamos have developed a variety of advanced technologies that anticipate-affect, detect, and neutralize & mitigate all types of explosive threats. v Technologies Since its inception in 1943, Los Alamos National Laboratory has been a driving force in explosives science. Scientists and engineers at Los Alamos have developed a variety of advanced technologies that anticipate, detect, and mitigate all types of explosive threats. ANDE:

  16. Sandia National Laboratories: News: Publications: Annual Report

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Annual Report Annual Report Archive Environmental Reports Fact Sheets Labs Accomplishments Lab News Partnerships Annual Report Research Magazine HPC Annual Reports Search Sandia Publications Strategic Plan News Annual Report Sandia's Perspectives report provides an overview of the labs, highlighting new programs, technologies, and community activities. Perspectives 2012 Perspectives Cover In this Issue Letter from Paul Hommert Our Mission Sandia Core Values Anticipate and Solve the Nation's Most

  17. Inertial Confinement Fusion Target Component Fabrication and Technology Development Support. Annual report, January 1, 1991--September 30, 1992

    SciTech Connect

    Steinman, D.

    1993-03-01

    On December 31, 1990, the US Department of Energy entered into a contract with General Atomics (GA) to be the Inertial Confinement Fusion (ICF) Target Component Fabrication and Technology Development Support contractor. This report documents the technical activities of the period January 1, 1991 through September 30, 1992. During this period, GA was assigned 15 tasks in support of the Inertial Confinement Fusion program and its laboratories. These tasks included Facilities Activation, Staff Development, and Capabilities Validation to establish facilities and equipment, and demonstrate capability to perform ICF target fabrication research, development and production activities. The capabilities developed and demonstrated are those needed for fabrication and precise characterization of polymer shells and polymer coatings. We made progress toward production capability for glass shells, barrier layer coatings, and gas idling of shells. We fabricated over 1000 beam diagnostic foil targets for Sandia National Laboratory Albuquerque and provided full-time on-site engineering support for target fabrication and characterization. We initiated development of methods to fabricate polymer shells by a controlled mass microencapsulation technique, and performed chemical syntheses of several chlorine- and silicon-doped polymer materials for the University of Rochester`s Laboratory for Laser Energetics (UR/LLE). We performed the conceptual design of a cryogenic target handling system for UR/LLE that will fill, transport, layer, and characterize targets filled with cryogenic deuterium or deuterium-tritium fuel, and insert these cryogenic targets into the OMEGA-Upgrade target chamber for laser implosion experiments. This report summarizes and documents the technical progress made on these tasks.

  18. Effects of aqueous effluents from in situ fossil fuel processing technologies on aquatic systems. Annual progress report, January 1-December 31, 1979

    SciTech Connect

    Bergman, H.L.

    1980-01-04

    This is the third annual progress report for a continuing EPA-DOE jointly funded project to evaluate the effects of aqueous effluents from in situ fossil-fuel processing technologies on aquatic biota. The project is organized into four project tasks: (1) literature review; (2) process water screening; (3) methods development; and (4) recommendations. Our Bibliography of aquatic ecosystem effects, analytical methods and treatment technologies for organic compounds in advanced fossil-fuel processing effluents was submitted to the EPA for publication. The bibliography contains 1314 citations indexed by chemicals, keywords, taxa and authors. We estimate that the second bibliography volume will contain approximately 1500 citations and be completed in February. We compiled results from several laboratories of inorganic characterizations of 19 process waters: 55 simulated in situ oil-shale retort waters; and Hanna-3, Hanna-4B 01W and Lawrence Livermore Hoe Creek underground coal gasification condenser waters. These process waters were then compared to a published summary of the analyses from 18 simulated in situ oil-shale retort waters. We completed this year 96-h flow-through toxicity bioassays with fathead minnows and rainbow trout and 48-h flow-through bioassays with Daphnia pulicaria exposed to 5 oil-shale process waters, 1 tar-sand process water, 2 underground coal gasification condenser waters, 1 post-gasification backflood condenser water, as well as 2 bioassays with fossil-fuel process water constituents. The LC/sub 50/ toxicity values for these respective species when exposed to these waters are given in detail. (LTN)

  19. Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988: Annual report of the metals initiative for fiscal year 1996

    SciTech Connect

    1998-01-01

    This annual report has been prepared for the President and Congress describing the activities carried out under the Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988, commonly referred to as the Metals Initiative. The Act has the following purposes: (1) increase energy efficiency and enhance the competitiveness of the American steel, aluminum, and copper industries; and (2) continue research and development efforts begun under the U.S. Department of Energy (DOE) program known as the Steel Initiative. These activities are detailed in a subsequent section. Other sections describe the appropriation history, the distribution of funds through fiscal year 1996, and the estimated funds necessary to continue projects through fiscal year 1997. The Metals Initiative supported four research and development projects with the U.S. Steel industry: (1) steel plant waste oxide recycling and resource recovery by smelting, (2) electrochemical dezincing of steel scrap, (3) rapid analysis of molten metals using laser-produced plasmas, and (4) advanced process control. There are three Metals Initiative projects with the aluminum industry: (1) evaluation of TiB2-G cathode components, (2) energy efficient pressure calciner, and (3) spray forming of aluminum. 1 tab.

  20. Research on Captive Broodstock Programs for Pacific Salmon; Assessment of Captive Broodstock Technologies, Annual Report 2002-2003.

    SciTech Connect

    Berejikian, Barry

    2004-01-01

    The success of captive broodstock programs depends on high in-culture survival, appropriate development of the reproductive system, and the behavior and survival of cultured salmon after release, either as adults or juveniles. Continuing captive broodstock research designed to improve technology is being conducted to cover all major life history stages of Pacific salmon. Current velocity in rearing vessels had little if any effect on reproductive behavior of captively reared steelhead. However, males and females reared in high velocity vessels participated a greater number of spawning events than siblings reared in low velocity tanks. Observations of nesting females and associated males in a natural stream (Hamma Hamma River) were consistent with those observed in a controlled spawning channel. DNA pedigree analyses did not reveal significant differences in the numbers of fry produced by steelhead reared in high and low velocity vessels. To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon are being exposed to known odorants at key developmental stages. Subsequently they will be tested for development of long-term memories of these odorants. In 2002-2003, the efficacy of EOG analysis for assessing imprinting was demonstrated and will be applied in these and other behavioral and molecular tools in the current work plan. Results of these experiments will be important to determine the critical periods for imprinting for the offspring of captively-reared fish destined for release into natal rivers or lakes. By early August, the oocytes of all of Rapid River Hatchery chinook salmon females returning from the ocean had advanced to the tertiary yolk globule stage; whereas, only some of the captively reared Lemhi River females sampled had advanced to this stage, and the degree of advancement was not dependent on rearing temperature. The mean spawning time of captive Lemhi River females was 3-4 weeks after that of the Rapid River fish

  1. GRC Annual Meeting 2015 Presentation: GTO Current Outlook | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy GRC Annual Meeting 2015 Presentation: GTO Current Outlook GRC Annual Meeting 2015 Presentation: GTO Current Outlook 2015 GRC GTO Current Outlook final.pdf (3.38 MB) More Documents & Publications Geothermal Technologies Office Current Outlook GRC Annual Meeting 2015 Presentation: GTO Current Outlook 2015 Annual Report, Geothermal Technologies Office 2015 Peer Review | Plenaries

  2. 2008 annual merit review

    SciTech Connect

    None, None

    2009-01-18

    The 2008 DOE Vehicle Technologies Program Annual Merit Review was held February 25-28, 2008 in Bethesda, Maryland. The review encompassed all of the work done by the Vehicle Technologies Program: a total of 280 individual activities were reviewed, by a total of just over 100 reviewers. A total of 1,908 individual review responses were received for the technical reviews, and an additional 29 individual review responses were received for the plenary session review.

  3. 2016 Annual Merit Review

    Energy.gov [DOE]

    At the Annual Merit Review and Peer Evaluation, project investigators present information on their efforts that have been financially supported by the Vehicle Technologies Office in the last year. Expert reviewers then evaluate these projects based on how much they contribute to or advance the Energy Department’s missions and goals.

  4. Annual emissions and air-quality impacts of an urban area district-heating system: Boston case study

    SciTech Connect

    Bernow, S.S.; McAnulty, D.R.; Buchsbaum, S.; Levine, E.

    1980-02-01

    A district-heating system, based on thermal energy from power plants retrofitted to operate in the cogeneration mode, is expected to improve local air quality. This possibility has been examined by comparing the emissions of five major atmospheric pollutants, i.e., particulates, sulfur oxides, carbon monoxide, hydrocarbons, and nitrogen oxides, from the existing heating and electric system in the City of Boston with those from a proposed district heating system. Detailed, spatial distribution of existing heating load and fuel mix is developed to specify emissions associated with existing heating systems. Actual electric-power-plant parameters and generation for the base year are specified. Additional plant fuel consumption and emissions resulting from cogeneration operation have been estimated. Six alternative fuel-emissions-control scenarios are considered. The average annual ground-level concentrations of sulfur oxides are calculated using a modified form of the EPA's Climatological Dispersion Model. This report describes the methodology, the results and their implications, and the areas for extended investigation. The initial results confirm expectations. Average sulfur oxides concentrations at various points within and near the city drop by up to 85% in the existing fuels scenarios and by 95% in scenarios in which different fuels and more-stringent emissions controls at the plants are used. These reductions are relative to concentrations caused by fuel combustion for heating and large commercial and industrial process uses within the city and Boston Edison Co. electric generation.

  5. Vehicle Technologies Office: 2013 Vehicle and Systems Simulation...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle and Systems Simulation and Testing R&D Annual Progress Report ... FY 2013 annual report focuses on the following areas: ... Technologies Office: 2015 Vehicle Systems Annual ...

  6. Vehicles Annual Merit Review and Peer Evaluation Open for Registration

    Energy.gov [DOE]

    The Vehicle Technologies Office's Annual Merit Review and Peer Evaluation is open for registration, which is free and open to the public. The Annual Merit Review will feature presentations on more than 300 projects supported by the Vehicle Technologies Office.

  7. Annual Technical Progress Report of Radioisotope Power System Materials Production and Technology Program Tasks for October 1, 2002 Through September 30, 2003

    SciTech Connect

    King, J.F.

    2004-05-18

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. For the Cassini Mission, for example, ORNL was involved in the production of carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS). This report has been divided into three sections to reflect program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2003. The first section deals primarily with maintenance of the capability to produce flight quality (FQ) CBCF insulator sets, iridium alloy blanks and foil, and CVS. In all three cases, production maintenance is assured by the manufacture of limited quantities of FQ components. The second section deals with several technology activities to improve the manufacturing processes, characterize materials, or to develop technologies for new radioisotope power systems. The last section is dedicated to studies related to the production of {sup 238}Pu.

  8. Semi-Annual Technical Progress Report of Radioisotope Power System Materials Production and Technology Program Tasks for October 1, 2001 Through March 31, 2002

    SciTech Connect

    J. P. Moore, JPM

    2002-05-22

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. For the Cassini Mission, for example, ORNL was involved in the production of carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS). This report has been divided into three sections to reflect program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2002. The first section deals primarily with maintenance of the capability to produce flight quality (FQ) CBCF insulator sets, iridium alloy blanks and foil, and CVS. In all three cases, production maintenance is assured by the manufacture of limited quantities of FQ components. The second section deals with several technology activities to improve the manufacturing processes, characterize materials, or to develop technologies for new radioisotope power systems. The last section is dedicated to studies related to the production of {sup 238}Pu.

  9. Semi-Annual Technical Progress Report of Radioisotope Power System Materials Production and Technology Program Tasks for April 1, 2002 Through September 20, 2002

    SciTech Connect

    Moore, J.P.

    2002-12-03

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. For the Cassini Mission, for example, ORNL was involved in the production of carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS). This report has been divided into three sections to reflect program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2002. The first section deals primarily with maintenance of the capability to produce flight quality (FQ) CBCF insulator sets, iridium alloy blanks and foil, and CVS. In all three cases, production maintenance is assured by the manufacture of limited quantities of FQ components. The second section deals with several technology activities to improve the manufacturing processes, characterize materials, or to develop technologies for new radioisotope power systems. The last section is dedicated to studies related to the production of {sup 238}Pu.

  10. FY 2012 Annual Progress Report for Energy Storage R&D | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Technologies Office: 2015 Energy Storage R&D Annual Report Vehicle Technologies Office: 2014 Energy Storage R&D Annual Report FY 2011 Annual Progress Report for Energy ...

  11. Sandia National Laboratories: News: Publications: Annual Report

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Homeland Security & Defense Science, Technology & Engineering View Multimedia version Download (PDF, 6 MB) 2007 2007 Annual Report Cover In this Issue Nuclear ...

  12. Technolog

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow Sandia National Laboratories' fundamental science and technology research leads to greater understanding of how and why things work and is intrinsic to technological advances. Basic research that challenges scientific assumptions enables the nation to push scientific boundaries. Innovations and breakthroughs produced at Sandia allow it to tackle critical issues, from

  13. Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technology Technology Delivering science to the marketplace through commercialization, spinoffs and industry partnerships. News Releases Science Briefs Photos Picture of the Week Publications Social Media Videos Fact Sheets Gary Grider (second from right) with the 2015 Richard P. Feynman Innovation Prize. Also pictured (left to right): Duncan McBranch, Chief Technology Officer of Los Alamos National Laboratory; Terry Wallace, Program Associate Director for Global Security at Los Alamos; and Lee

  14. Technolog

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow ... Basic research that challenges scientific assumptions ...

  15. Technical Standards, 2008 Annual Report- June 10, 2008

    Energy.gov [DOE]

    The National Technology Transfer and Advancement Act of 1995, 2008 Annual Report for The Department of Energy

  16. Technical Standards, 2009 Annual Report- April 14, 2009

    Energy.gov [DOE]

    The National Technology Transfer and Advancement Act of 1995, 2009 Annual Report for The Department of Energy

  17. Technical Standards, 2011 Annual Report- August 21, 2011

    Energy.gov [DOE]

    The National Technology Transfer and Advancement Act of 1995, 2011 Annual Report for The Department of Energy

  18. Technical Standards, 2010 Annual Report- December 13, 2010

    Energy.gov [DOE]

    The National Technology Transfer and Advancement Act of 1995, 2010 Annual Report for The Department of Energy

  19. Video: 2016 Annual Merit Review and Peer Evaluation Meeting Plenary -

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Technologies Office Overview | Department of Energy Vehicle Technologies Office Overview Video: 2016 Annual Merit Review and Peer Evaluation Meeting Plenary - Vehicle Technologies Office Overview Watch the Vehicle Technologies Office overview by Christy Cooper, Acting Director, Vehicle Technologies Office, at the 2016 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting. View additional recordings from the 2016 Annual

  20. Annual Energy Outlook Retrospective Review

    Reports and Publications

    2015-01-01

    The Annual Energy Outlook Retrospective Review provides a yearly comparison between realized energy outcomes and the Reference case projections included in previous Annual Energy Outlooks (AEO) beginning with 1982. This edition of the report adds the AEO 2012 projections and updates the historical data to incorporate the latest data revisions.

  1. 2014 Annual Merit Review Results Report - Power Electronics and...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Power Electronics and Electrical Machines Technologies 2014 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Merit review of DOE Vehicle ...

  2. 2011 Annual Merit Review Results Report - Power Electronics and...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Power Electronics and Electrical Machines Technologies 2011 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Merit review of DOE Vehicle ...

  3. 2012 Annual Merit Review Results Report - Power Electronics and...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Power Electronics and Electrical Machines Technologies 2012 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Merit review of DOE Vehicle ...

  4. 2013 Annual Merit Review Results Report - Power Electronics and...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Power Electronics and Electrical Machines Technologies 2013 Annual Merit Review Results Report - Power Electronics and Electrical Machines Technologies Merit review of DOE Vehicle ...

  5. 2011 Annual Merit Review Results Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    More Documents & Publications DOE Vehicle Technologies Program 2009 Merit Review Report Carbon Fiber Technology Facility 2008 Annual Merit Review Results Summary - Cover and Table ...

  6. 2011 Annual Merit Review Results Report - Fuels & Lubricants...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (1.64 MB) More Documents & Publications 2010 DOE EERE Vehicle Technologies Program Merit Review - Fuels Technologies 2011 Annual Merit Review Results Report - Fuels & Lubricants

  7. 2008 Annual Merit Review Results Summary - 8. High Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    8. High Efficiency Clean Combustion and Enabling Technologies 2008 Annual Merit Review Results Summary - 8. High Efficiency Clean Combustion and Enabling Technologies DOE Vehicle ...

  8. 2013 Annual Merit Review Results Report - Vehicle Analysis |...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Analysis 2013 Annual Merit Review Results Report - Vehicle Analysis Merit review of DOE Vehicle Technologies research ... Vehicle Technologies Office Merit Review 2015: ...

  9. 2012 Annual Merit Review Results Report - Advanced Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Merit Review Results Report - Advanced Combustion Engine Technologies 2012 Annual Merit Review Results Report - Advanced Combustion Engine Technologies Merit review of DOE ...

  10. Annual Technical Progress Report of Radioisotope Power System Materials Production and Technology Tasks for October 1, 2003 through September 30, 2004

    SciTech Connect

    None listed

    2005-06-01

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. For the Cassini Mission, ORNL produced carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) used in the generators. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. This report reflects program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2004. Production and production maintenance activities for flight quality (FQ) CBCF insulator sets, iridium alloy blanks and foil, and CVS are summarized in this report. In all three cases, production maintenance is assured by the manufacture of limited quantities of FQ components. Technology activities are also reported that were conducted to improve the manufacturing processes, characterize materials, or to develop information for new radioisotope power systems.

  11. Control of SO{sub 2} emissions from power plants: A case of induced technological innovation in the US

    SciTech Connect

    Taylor, M.R.; Rubin, E.S.; Hounshell, D.A.

    2005-07-01

    This paper investigates how the details of government actions induce innovation-the overlapping activities of invention, adoption and diffusion, and learning by doing-in 'environmental technology,' products and processes that either control pollutant emissions or prevent emissions altogether. It applies multiple quantitative and qualitative measures of innovation to a case subject to several 'technology - push' and 'demand-pull', instruments: sulfur dioxide control technology for power plants. The study employs analyses of public R&D funding, patents, expert interviews, learning curves, conference proceedings, and experience curves. Results indicate that: regulation and the anticipation of regulation stimulate invention; technology-push instruments appear to be less effective at prompting invention than demand-pull instruments; and regulatory stringency focuses inventive activity along certain technology pathways. Increased diffusion of the technology results in significant and predictable operating cost reductions in existing systems, as well as notable efficiency improvements and capital cost reductions in new systems. Government plays an important role in fostering knowledge transfer via technical conferences, as well as affecting the pattern of collaborative relationships within the technical research community via regulatory changes that affect the market for the technology. Finally, the case provides little evidence for the claim that cap-and-trade instruments induce innovation more effectively than other instruments.

  12. Analysis of the Climate Change Technology Initiative

    Reports and Publications

    1999-01-01

    Analysis of the impact of specific policies on the reduction of carbon emissions and their impact on U.S. energy use and prices in the 2008-2012 time frame. Also, analyzes the impact of the President's Climate Change Technology Initiative, as defined for the 2000 budget, on reducing carbon emissions from the levels forecast in the Annual Energy Outlook 1999 reference case.

  13. Vehicle Technologies Office Merit Review 2015: A Commercially...

    Energy.gov [DOE] (indexed site)

    Amprius at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation ... Storage R&D Annual Report Vehicle Technologies ...

  14. Vehicle Technologies Office Merit Review 2015: High-Efficiency...

    Energy Saver

    Corporation at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation ... Drive Technologies Annual R&D Progress Report

  15. Reservoir and injection technology: Geothermal reservoir engineering research at Stanford: Third annual report for the period October 1, 1986 through September 30, 1987: (Final report)

    SciTech Connect

    Ramey, H.J. Jr.; Horne, R.N.; Miller, F.G.; Brigham, W.E.

    1988-02-01

    This paper discusses different aspects of geothermal reservoir engineering. General topics covered are: reinjection technology, reservoir technology, and heat extraction. (LSP)

  16. SciDAC's Earth System Grid Center for Enabling Technologies Semi-Annual Progress Report for the Period April 1, 2009 through September 30, 2009

    SciTech Connect

    Williams, Dean N.; Foster, I. T.; Middleton, D. E.

    2009-10-15

    This report summarizes work carried out by the ESG-CET during the period April 1, 2009 through September 30, 2009. It includes discussion of highlights, overall progress, period goals, collaborations, papers, and presentations. To learn more about our project, and to find previous reports, please visit the Earth System Grid Center for Enabling Technologies (ESG-CET) website. This report will be forwarded to the DOE SciDAC program management, the Office of Biological and Environmental Research (OBER) program management, national and international collaborators and stakeholders (e.g., the Community Climate System Model (CCSM), the Intergovernmental Panel on Climate Change (IPCC) 5th Assessment Report (AR5), the Climate Science Computational End Station (CCES), the SciDAC II: A Scalable and Extensible Earth System Model for Climate Change Science, the North American Regional Climate Change Assessment Program (NARCCAP), and other wide-ranging climate model evaluation activities). During this semi-annual reporting period, the ESG-CET team continued its efforts to complete software components needed for the ESG Gateway and Data Node. These components include: Data Versioning, Data Replication, DataMover-Lite (DML) and Bulk Data Mover (BDM), Metrics, Product Services, and Security, all joining together to form ESG-CET's first beta release. The launch of the beta release is scheduled for late October with the installation of ESG Gateways at NCAR and LLNL/PCMDI. Using the developed ESG Data Publisher, the ESG II CMIP3 (IPCC AR4) data holdings - approximately 35 TB - will be among the first datasets to be published into the new ESG enterprise system. In addition, the NCAR's ESG II data holdings will also be published into the new system - approximately 200 TB. This period also saw the testing of the ESG Data Node at various collaboration sites, including: the British Atmospheric Data Center (BADC), the Max-Planck-Institute for Meteorology, the University of Tokyo Center for

  17. Annual Energy Outlook 2015 - Appendix A

    Gasoline and Diesel Fuel Update

    2015 Reference case Table A12. Petroleum and other liquids prices (2013 dollars per gallon, unless otherwise noted) Energy Information Administration Annual Energy Outlook 2015 ...

  18. Annual Energy Outlook 2015 - Appendix A

    Energy Information Administration (EIA) (indexed site)

    6 Reference case Energy Information Administration Annual Energy Outlook 2015 Table A3. Energy prices by sector and source (2013 dollars per million Btu, unless otherwise noted) ...

  19. Annual Energy Outlook 2015 - Appendix A

    Annual Energy Outlook

    Reference case Table A2. Energy consumption by sector and source (quadrillion Btu per year, unless otherwise noted) Energy Information Administration Annual Energy Outlook 2015 ...

  20. Renewable energy annual 1995

    SciTech Connect

    1995-12-01

    The Renewable Energy Annual 1995 is the first in an expected series of annual reports the Energy Information Administration (EIA) intends to publish to provide a comprehensive assessment of renewable energy. This report presents the following information on the history, status, and prospects of renewable energy data: estimates of renewable resources; characterizations of renewable energy technologies; descriptions of industry infrastructures for individual technologies; evaluations of current market status; and assessments of near-term prospects for market growth. An international section is included, as well as two feature articles that discuss issues of importance for renewable energy as a whole. The report also contains a number of technical appendices and a glossary. The renewable energy sources included are biomass (wood), municipal solid waste, biomass-derived liquid fuels, geothermal, wind, and solar and photovoltaic.

  1. Standard Scenarios Annual Report

    Energy.gov [DOE]

    The National Renewable Energy Laboratory is conducting a study sponsored by the U.S. Department of Energy DOE, Office of Energy Efficiency and Renewable Energy (EERE), that aims to document and implement an annual process designed to identify a realistic and timely set of input assumptions (e.g., technology cost and performance, fuel costs), and a diverse set of potential futures (standard scenarios), initially for electric sector analysis.

  2. Kennecott Utah Copper Retrofits Smelting Applications from Air-Fuel to Oxy-Fuel Burners: Office of Industrial Technologies (OIT) Best Practices Mining Technical Case Study

    SciTech Connect

    U.S. Department of Energy

    2001-08-06

    This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

  3. Vehicle Technologies Office: 2014 Fuel and Lubricant Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Technologies Office: 2014 Fuel and Lubricant Technologies R&D Annual Progress Report This report describes the progress made on the research and development projects funded ...

  4. Vehicle Technologies Office: 2013 Fuel and Lubricant Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Technologies Office: 2013 Fuel and Lubricant Technologies R&D Annual Progress Report This report describes the progress made on the research and development projects funded ...

  5. Annual Postdoctoral Research and Career Symposium | Argonne National

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Annual Performance Reports Annual Performance Reports The Annual Performance Report provides key performance information that demonstrates DOE's accountability to ensure America's security and prosperity by addressing its energy, environmental, and nuclear challenges through transformative science and technology solutions. These reports are produced as an alternative to the Performance and Accountability Report. Documents Available for Download March 29, 2016 FY 2015 Annual Performance Report

  6. Vehicle Technologies Office: 2014 Advanced Combustion Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2014 Advanced Combustion Engine Annual Progress Report Vehicle Technologies Office: 2014 Advanced Combustion Engine Annual Progress Report The Advanced Combustion Engine research...

  7. Vehicle Technologies Office: 2008 Advanced Power Electronics...

    Energy Saver

    Power Electronics and Electric Machinery R&D Annual Progress Report Vehicle Technologies Office: 2008 Advanced Power Electronics and Electric Machinery R&D Annual Progress Report ...

  8. Vehicle Technologies Office: 2013 Advanced Power Electronics...

    Energy Saver

    Power Electronics and Electric Motors R&D Annual Progress Report Vehicle Technologies Office: 2013 Advanced Power Electronics and Electric Motors R&D Annual Progress Report The ...

  9. Vehicle Technologies Office: 2011 Advanced Power Electronics...

    Energy Saver

    Power Electronics and Electric Motors R&D Annual Progress Report Vehicle Technologies Office: 2011 Advanced Power Electronics and Electric Motors R&D Annual Progress Report The ...

  10. Technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technology A research team at the University of Colorado has developed a novel heat exchanger design and accompanying manufacturing technique for creating low-cost microchannel heat exchangers from plastics, metals, or ceramics. The prototype used laser welding (upper red lines at right). Expansion makes "chessboard" counter flow pattern (lower right). The figure below shows mass production, where sheets are added one at a time and welded with a mask and filament (left) or laser

  11. Technology Integration | Department of Energy

    Energy.gov [DOE] (indexed site)

    Program Annual Merit Review and Peer Evaluation Vehicle Technologies Plenary vtpn02smithti2011o.pdf (814.37 KB) More Documents & Publications Technology Integration Overview ...

  12. Solutia: Massachusetts Chemical Manufacturer Uses SECURE Methodology to Identify Potential Reductions in Utility and Process Energy Consumption. Industrial Technologies Program (ITP) Chemicals BestPractices Plant-Wide Assessment Case Study (Brochure).

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies Program BENEFITS * Identified potential annual cost savings of nearly $3.3 million from reduced resource consumption and improved productivity * Found ways to reduce annual electricity consumption by almost 9.6 million kWh and annual fuel consumption by 338,000 MMBtu * Identified ways to decrease fresh water consumption and wastewater generation * Resulted in short-term plans for immediate benefit, such as steam trap and lighting surveys, and long-term plans for optimizing the

  13. DOE/IG Annual Performance Report FY 2008, Annual Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOEIG Annual Performance Report FY 2008, Annual Performance Plan FY 2009 DOEIG Annual Performance Report FY 2008, Annual Performance Plan FY 2009 DOEIG Annual Performance Report ...

  14. Petroleum Marketing Annual Archives

    Energy Information Administration (EIA) (indexed site)

    Petrolem Reports Petroleum Marketing Annual Archives The Petroleum Marketing Annual was discontinued in 2010. Choose the year from the archive Petroleum Marketing Annual you wish...

  15. Incentives for technological innovation in air pollution reduction: an ETIP policy research series. volume 9: internal offsets and technological innovation: six case studies

    SciTech Connect

    Mogee, M.E.

    1982-04-01

    This report describes the experiences of six industrial firms with the new Federal policy of internal offsets. Offsets are part of a group of regulatory reforms initiated by the Environmental Protection Agency and called by the generic title of 'emission trading'. Offsets were introduced to allow continued economic growth in nonattainment areas and to stimulate innovation in pollution control and process technology by making it profitable for firms to create more reductions than the law now requires. The report discusses the problems of defining and measuring innovation as well as presenting industrial firm perceptions of innovation associated with offset cases.

  16. 2010 Annual Merit Review Results Summary | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    10 Annual Merit Review Results Summary 2010 Annual Merit Review Results Summary Merit review of DOE Vehicle Technologies research activities 2010_amr.pdf (8.04 MB) More Documents & Publications 2010 DOE EERE Vehicle Technologies Program Merit Review - Vehicle Systems Simulation and Testing 2011 Annual Merit Review Results Report - Hybrid and Vehicle Systems Technologies DOE Vehicle Technologies Program 2009 Merit Review Report - Vehicle Systems

  17. Review comments from 2004 ATD Annual Review

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report on the Annual Review of the FY 2005 Advanced Technology Development Program [pic] August 9 & 10, 2005 Argonne IL November 2005 U.S. Department of Energy Office of FreedomCAR and Vehicle Technologies High Power Energy Storage Program November 3, 2005 Dear Colleague: This document is a summary of the evaluation and comments provided by the review panel for the FY 2005 Department of Energy (DOE) Advanced Technology Development (ATD) program annual review. The review was held at the

  18. Laboratories for the 21st Century: Case Studies; National Renewable Energy Laboratory, Science and Technology Facility, Golden, Colorado

    SciTech Connect

    Not Available

    2007-03-01

    This publication is one in series of case studies for "Laboratories for the 21st Century," a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy Federal Energy Management Program. It is intended for those who plan to design and construct public and private-sector laboratory buildings. This case study describes the Science and Technology Facility, a new laboratory at NREL that incorporated energy-efficient and sustainable design features including underfloor air distribution in offices, daylighting, and process cooling.

  19. Vehicle Technologies Office: 2008 Oak Ridge Transportation Technology

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Program Annual Report | Department of Energy Oak Ridge Transportation Technology Program Annual Report Vehicle Technologies Office: 2008 Oak Ridge Transportation Technology Program Annual Report ornl_ttp_report_fy08.pdf (4.58 MB) More Documents & Publications FY 2008 Progress Report for Lightweighting Materials - 1. Introduction 2011 Annual Progress Report for Lightweighting Materials FY 2009 Progress Report for Lightweighting Materials - 7. Low-Cost Carbon Fiber

  20. Benchmarking of Competitive Technologies

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  1. Benchmarking of Competitive Technologies

    Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  2. Technology Integration Overview

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  3. Recycling Technology Validation

    Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  4. Value and Technology Assessment to Enhance the Business Case for the CERTS Microgrid

    SciTech Connect

    Lasseter, Robert; Eto, Joe

    2010-05-15

    &D on the CERTS Microgrid Concept builds upon this base of technical accomplishments to prioritize, develop, and then demonstrate technology enhancements to further enhance the business case for microgrids. That is, having demonstrated the technical feasibility of microgrid functions, RD&D optimization efforts are now needed to accelerate commercial deployment. The current phase is a contribution to these efforts. This project involved seven distinct analysis, bench-, and full-scale testing tasks. The first five tasks were described in the original proposal submitted and awarded through DOE's solicitation. Two additional tasks were added to address issues that had been identified in the earlier, first phase of testing.

  5. Annual Training Plan Template

    Energy.gov [DOE]

    The Annual Training Plan Template is used by an organization's training POC to draft their organization's annual training plan.

  6. Case Studies from the Climate Technology Partnership: Landfill Gas Projects in South Korea and Lessons Learned

    SciTech Connect

    Larney, C.; Heil, M.; Ha, G. A.

    2006-12-01

    This paper examines landfill gas projects in South Korea. Two case studies provide concrete examples of lessons learned and offer practical guidance for future projects.

  7. Geothermal Electricity Technology Evaluation Model (GETEM) Individual Case Files and Summary Spreadsheet (GETEM version Spring 2013)

    DOE Data Explorer

    Hanson, Steven CJ

    This group of files-- 10 GETEM individual case files and 1 summary spreadsheet-- contain final data from the revisions between summer 2011 and spring 2013.

  8. Geothermal Electricity Technology Evaluation Model (GETEM) Individual Case Files and Summary Spreadsheet (GETEM version Spring 2013)

    DOE Data Explorer

    Hanson, Steven CJ

    2013-03-07

    This group of files-- 10 GETEM individual case files and 1 summary spreadsheet-- contain final data from the revisions between summer 2011 and spring 2013.

  9. A comparison of surface topography characterization technologies for use in comparing spent bullet and cartridge case signatures

    SciTech Connect

    Batishko, C.R.; Hickman, B.J.; Cuta, F.M.

    1992-11-01

    The Pacific Northwest Laboratory was tasked by the US Department of Energy to provide technical assistance to the Federal Bureau of Investigation in evaluating and ranking technologies potentially useful in high-speed comparison of unique spent bullet and cartridge case surface signatures. Information sources included vendor input, current relevant literature, vendor phone contacts, other FBI resources, relevant PNL reports, and personal contact with numerous PNL technical staff. A comprehensive list of technologies was reduced to a list of 38 by grouping very similar methodologies, and further reduced to a short list of six by applying a set of five minimum functional requirements. A total of 14 primary criteria, many having secondary criteria, were subsequently used to evaluate each technology. The ranked short list results are reported and supported in this document, and their scores normalized to a hypothetical ideal system are as follows: (1) confocal microscopy 82.13; (2) laser dynamic focusing 72.04; (3)moire interferometry V70.94; (4)fringe field capacitance;(5)laser triangulation 66.18; (6)structured/sectioned light 65.55. Information available within the time/budget constraints which was used for the evaluation and ranking was not sufficiently detailed to evaluate specific implementations of the technologies. Each of the technologies in the short list was judged potentially capable of meeting the minimum requirements. Clever, novel engineering solutions resulting in a more cost-effective system, or a closer fit to the ideal system,'' could result in a reordering of the short list when actual technical proposals are evaluated. Therefore, it is recommended that a Request for Proposal not be limited to only the highest ranked technology, but include all six technologies in the short list.

  10. A comparison of surface topography characterization technologies for use in comparing spent bullet and cartridge case signatures

    SciTech Connect

    Batishko, C.R.; Hickman, B.J.; Cuta, F.M.

    1992-11-01

    The Pacific Northwest Laboratory was tasked by the US Department of Energy to provide technical assistance to the Federal Bureau of Investigation in evaluating and ranking technologies potentially useful in high-speed comparison of unique spent bullet and cartridge case surface signatures. Information sources included vendor input, current relevant literature, vendor phone contacts, other FBI resources, relevant PNL reports, and personal contact with numerous PNL technical staff. A comprehensive list of technologies was reduced to a list of 38 by grouping very similar methodologies, and further reduced to a short list of six by applying a set of five minimum functional requirements. A total of 14 primary criteria, many having secondary criteria, were subsequently used to evaluate each technology. The ranked short list results are reported and supported in this document, and their scores normalized to a hypothetical ideal system are as follows: (1) confocal microscopy 82.13; (2) laser dynamic focusing 72.04; (3)moire interferometry V70.94; (4)fringe field capacitance;(5)laser triangulation 66.18; (6)structured/sectioned light 65.55. Information available within the time/budget constraints which was used for the evaluation and ranking was not sufficiently detailed to evaluate specific implementations of the technologies. Each of the technologies in the short list was judged potentially capable of meeting the minimum requirements. Clever, novel engineering solutions resulting in a more cost-effective system, or a closer fit to the ``ideal system,`` could result in a reordering of the short list when actual technical proposals are evaluated. Therefore, it is recommended that a Request for Proposal not be limited to only the highest ranked technology, but include all six technologies in the short list.

  11. Annual Progress Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Program Publications » Annual Progress Reports Annual Progress Reports This page contains annual progress reports for the Fuel Cell Technologies Office and the Transportation Fuel Cell Power Systems project. The FY 2015 Progress Report for DOE's Hydrogen and Fuel Cells Program summarizes the year's hydrogen and fuel cell R&D activities and accomplishments. The FY 2014 Progress Report for DOE's Hydrogen and Fuel Cells Program summarizes the year's hydrogen and fuel cell R&D activities

  12. Annual Report

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    09 THROUGH 09/30/2010 The following Annual Freedom of Information Act report covers the Period 10/01/2009, through 09/30/2010, as required by 5 U.S.C. 552. I. BASIC INFORMATION REGARDING REPORT 1. Kevin T. Hagerty, Director Office of Information Resources, MA-90 U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 202-586-5955 Alexander Morris, FOIA Officer Sheila Jeter, FOIA/Privacy Act Specialist FOIA Office, MA-90 Office of Information Resources U.S. Department of Energy

  13. Renewable energy annual 1996

    SciTech Connect

    1997-03-01

    This report presents summary data on renewable energy consumption, the status of each of the primary renewable technologies, a profile of each of the associated industries, an analysis of topical issues related to renewable energy, and information on renewable energy projects worldwide. It is the second in a series of annual reports on renewable energy. The renewable energy resources included in the report are biomass (wood and ethanol); municipal solid waste, including waste-to-energy and landfill gas; geothermal; wind; and solar energy, including solar thermal and photovoltaic. The report also includes various appendices and a glossary.

  14. Annual energy outlook 2005 with projections to 2025

    SciTech Connect

    2005-02-01

    The Annual Energy Outlook 2005 (AEO2005) presents midterm forecasts of energy supply, demand, and prices through 2025 prepared by the Energy Information Administration (EIA). The projections are based on results from EIA's National Energy Modelling System (NEMS). The report begins with an 'Overview' summarizing the AEO2005 reference case. The next section, 'Legislation and Regulations', discusses evolving legislative and regulatory issues in the USA. Issues in Focus includes discussions on key energy market issues and examines their potential impacts. In particular, it includes a discussion of the world oil price assumptions used in the reference case and four alternative world oil price cases examined in AEO2005. 'Issues in Focus' is followed by 'Market Trends', which provides a summary of energy market trends in the AEO2005 forecast. The analysis in AEO2005 focuses primarily on a reference case, lower and higher economic growth cases, and four alternative oil price cases, a low world oil price case, an October oil futures case, and two high world oil price cases. Forecast tables for those cases are provided in Appendixes A through D. The major results for the alterative cases, which explore the impacts of varying key assumption in NEMS (such as rates of technology penetration), are summarized in Appendix E. Appendix F briefly describes NEMS and the alternative cases. 115 figs., 38 tabs., 8 apps.

  15. Annual Reports

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Liabilities Financial Plan Financial Public Processes Asset Management Cost Verification Process Rate Cases Rate Information Residential Exchange Program Surplus Power Sales...

  16. Y-12s Training and Technology … Case Histories

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    and the requirement for sixth-grade reading and math achievement was waived in his case. ... set up a shop curriculum for him and taught him while other trainees were in math classes. ...

  17. Vehicle Technologies Office: 2008 Advanced Vehicle Technology Analysis and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Evaluation Activities and Heavy Vehicle Systems Optimization Program Annual Progress Report | Department of Energy Vehicle Technology Analysis and Evaluation Activities and Heavy Vehicle Systems Optimization Program Annual Progress Report Vehicle Technologies Office: 2008 Advanced Vehicle Technology Analysis and Evaluation Activities and Heavy Vehicle Systems Optimization Program Annual Progress Report 2008_avtae_hvso.pdf (13.32 MB) More Documents & Publications Vehicle Technologies

  18. SSL TECHNOLOGY DEVELOPMENT WORKSHOP

    Energy.gov [DOE]

    Rapid advances in SSL technology make it easy to forget that this technology is still at a relatively early stage of development, and much of its potential remains untapped. The 10th annual DOE SSL...

  19. SSL Technology Development Workshop

    Energy.gov [DOE]

    Rapid advances make it easy to forget that SSL technology is still at a relatively early stage of development, and much of its potential remains untapped. The 10th annual DOE SSL Technology...

  20. Technology Solutions Case Study: Stud Walls with Continuous Exterior Insulation for Factory Built Housing

    SciTech Connect

    2014-01-01

    The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective alternative envelope designs. In the near term, these technologies will play a central role in meeting stringent energy code requirements. For manufactured homes, the thermal requirements, last updated by statute in 1994, will move up to the more rigorous IECC 2012 levels in 2013, the requirements of which are consistent with site built and modular housing. This places added urgency on identifying envelope technologies that the industry can implement in the short timeframe. The primary goal of this research is to develop wall designs that meet the thermal requirements based on 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing the new envelope technologies. This work is part of a four-phase, multi-year effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three selected methods for building high performance wall systems. Phase 2 focused on the development of viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped critique and select the most viable solution to move further in the research stud walls with continuous exterior insulation. Phase 3, the subject of the current report, focused on the design development of the selected wall concept and explored variations on the use of exterior foam insulation. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing.

  1. Factors Affecting the Rate of Penetration of Large-Scale Electricity Technologies: The Case of Carbon Sequestration

    SciTech Connect

    James R. McFarland; Howard J. Herzog

    2007-05-14

    This project falls under the Technology Innovation and Diffusion topic of the Integrated Assessment of Climate Change Research Program. The objective was to better understand the critical variables that affect the rate of penetration of large-scale electricity technologies in order to improve their representation in integrated assessment models. We conducted this research in six integrated tasks. In our first two tasks, we identified potential factors that affect penetration rates through discussions with modeling groups and through case studies of historical precedent. In the next three tasks, we investigated in detail three potential sets of critical factors: industrial conditions, resource conditions, and regulatory/environmental considerations. Research to assess the significance and relative importance of these factors involved the development of a microeconomic, system dynamics model of the US electric power sector. Finally, we implemented the penetration rate models in an integrated assessment model. While the focus of this effort is on carbon capture and sequestration technologies, much of the work will be applicable to other large-scale energy conversion technologies.

  2. IRS Parking Facility Lighting Retrofit Reduces Annual Energy...

    Office of Environmental Management (EM)

    The retrofit resulted in annual energy savings of 2 million kWh, annual cost savings of over 122,000, and a simple payback of 2.5 years. Download the IRS parking facility case ...

  3. New Whole-House Solutions Case Study: Lancaster County Career and Technology Center Green Home 3 - Mount Joy, Pennsylvania

    SciTech Connect

    2014-12-01

    This case study describes a unique vocational program at Lancaster County Career Technology Center in Mount Joy, PA, where high school students are gaining hands-on construction experience in building high performance homes with help from Building America team, Home Innovation Research Labs. This collaboration resulted in the Green Home 3, the third in a series of high performance homes for Apprentice Green. As one of LCCTC’s key educational strategies for gaining practical experience, students are involved in building real houses that incorporate state-of-the-art energy efficiency and green technologies. With two homes already completed, the Green Home 3 achieved a 44% whole-house energy savings over the Building America New Construction B10 Benchmark, DOE Zero Energy Ready Home (formerly Challenge Home) certification, and National Green Building Standard Gold-level certification.

  4. UDW_Annual _FY13 Format

    Office of Scientific and Technical Information (OSTI)

    of Science, Technology, and Industry web site at: http:www.osti.govbridge Annual ... with the EDX Operations and Development Team to develop a new web-based mapping tool. ...

  5. NERSC Annual Reports

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Annual Reports NERSC Annual Reports Sort by: Default | Name 2015AnnualReportcover NERSC Annual Report 2015 Download Image: 2015AnnualReportcover.png | png | 542 KB Download File: 2015NERSCAnnualReportFinal.pdf | pdf | 4.8 MB 2014cover.jpg NERSC Annual Report 2014 Download Image: 2014cover.jpg | jpg | 202 KB Download File: 2014NERSCAnnualReport.pdf | pdf | 6.1 MB 2013-Annual-Report-cover.png NERSC Annual Report 2013 Download Image: 2013-Annual-Report-cover.png | png | 645 KB Download File:

  6. Passive Room-to-Room Air Transfer, Fresno, California (Fact Sheet), Building America Case Study: Whole-House Solutions for Existing Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Passive Room-to-Room Air Transfer Fresno, California PROJECT INFORMATION Construction: Retrofit Type: Single-family Builder: GreenEarthEquities (retrofit); http://greenearthequities.com/ Size: 1,621 ft 2 Price range: About $140,000 Date completed: 2011 Climate zone: Mixed-dry PERFORMANCE DATA HERS index: Not available Builder standard practice: Not available Case study house: 1,621 ft 2 With renewables: Not applicable Without renewables: 50.1% Projected annual energy cost savings: Not available

  7. Hydronic Heating Coil Versus Propane Furnace, Rehoboth Beach, Delaware (Fact Sheet), Building America Case Study: Whole-House Solutions for New Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hydronic Heating Coil Versus Propane Furnace Rehoboth Beach, Delaware PROJECT INFORMATION Construction: New Home Type: Single-family, affordable IBACOS, www.ibacos.com Builder: Insight Homes, Rehoboth Beach, DE www.itsjustabetterhouse.com Size: 1,715 ft 2 Price Range: About $230,000 Date Completed: 2012 Climate Zone: Mixed-humid PERFORMANCE DATA Builder standard practice = 56 Case study house = 1,715 ft 2 With renewables = Not applicable Without renewables = 56 Projected annual energy cost

  8. Technical Report for DOE grant ER63467-1020269-0008388 ''International Innovation & Diffusion of Environmental Technologies: The Case of NOX''

    SciTech Connect

    David Popp

    2004-11-18

    This research traces the development of nitrogen dioxide (NOX) and sulfur dioxide (SO2) pollution control devices for coal-fired power plants in the United States, Japan, and Germany. This is of particular interest because of the timing of regulation in each country. While the US was an early adopter of SO2 regulations, it did not adopt stringent NOX regulations until the 1990s. Both Japan and Germany adopted stringent NOX regulations earlier. As such, advanced control techniques such as selective catalytic reduction (SCR) were first developed in Japan and Germany. In contrast, US firms were more active in the development of SO2 control devices. This study uses patent data from the three countries, as well as adoption data for individual plants, to trace the development of these technologies. Of particular interest is the role of technology transfer. While we know from previous research that firms respond to new regulations in their own country with new innovations, we do no t know the extent to which firms respond to regulations in foreign countries. Moreover, we know little about how innovations developed abroad enter the domestic knowledge base. For example, do firms make direct use of knowledge developed in foreign countries, or is domestic R&D necessary to adapt these innovations to local conditions. Understanding such trends is important, as it affects both the speed at which technology will diffuse, and the cost of technology transfer. To address these issues, this research compares the role that domestic and foreign knowledge play in the decisions of firms to adopt new environmental technologies. I begin by using patent and regulatory data from the U.S., Japan, and Germany to study the links between both domestic and foreign environmental policy and innovation. I show that innovative activity responds to domestic environmental policy pressures, but not to foreign pressures. Moreover, even countries that adopt regulations late, such as th e U.S. in the case

  9. 2011 Annual Planning Summary for Loan Programs Office (LPO) ...

    Energy Saver

    Planning Summary for Fossil Energy, National Energy Technology Laboratory, RMOTC, and Strategic Petroleum Reserve Field Office 2012 Annual Planning Summary for Loan Program...

  10. 2013 Annual Merit Review Results Report - Merit Review Attendees...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Merit Review Attendees 2013 Annual Merit Review Results Report - Merit Review Attendees Merit review of DOE Vehicle Technologies research activities 2013amr13.pdf (654.24 KB) ...

  11. 2013 Annual Merit Review Results Report - Introduction | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Introduction 2013 Annual Merit Review Results Report - Introduction Merit review of DOE Vehicle Technologies research activities 2013amrcovertocintro.pdf (2.89 MB) More ...

  12. 2014 Annual Merit Review Results Report - Vehicle Analysis |...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Review Results Report - Vehicle Analysis 2014 Annual Merit Review Results Report - Vehicle Analysis Merit review of DOE Vehicle Technologies research activities 2014amr09.pdf ...

  13. 2011 Annual Merit Review Results Report - Acronyms | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Acronyms 2011 Annual Merit Review Results Report - Acronyms Merit review of DOE Vehicle Technologies research activities 2011amr09.pdf (199.97 KB) More Documents & Publications ...

  14. 2012 Annual Merit Review Results Report - Acronyms | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Acronyms 2012 Annual Merit Review Results Report - Acronyms Merit review of DOE Vehicle Technologies research activities 2012amr09.pdf (290.65 KB) More Documents & Publications ...

  15. 2013 Annual Merit Review Results Report - Fuels & Lubricants...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fuels & Lubricants 2013 Annual Merit Review Results Report - Fuels & Lubricants Merit review of DOE Vehicle Technologies research activities 2013amr05.pdf (1.35 MB) More ...

  16. 2013 Annual Merit Review Results Report - Acronyms | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Acronyms 2013 Annual Merit Review Results Report - Acronyms Merit review of DOE Vehicle Technologies research activities 2013amr10.pdf (324.63 KB) More Documents & Publications ...

  17. 2011 Annual Merit Review Results Report - Fuels & Lubricants...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2amr05.pdf (1.32 MB) More Documents & Publications 2011 Annual Merit Review Results Report - Fuels & Lubricants 2010 DOE EERE Vehicle Technologies Program Merit Review - Fuels ...

  18. 2010 Annual Merit Review Results Summary | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Summary 2010 Annual Merit Review Results Summary Merit review of DOE Vehicle Technologies research activities 2010amrtitletocintro.pdf (659.73 KB) More Documents & Publications ...

  19. 2014 Annual Merit Review Results Report - Merit Review Attendees...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Merit Review Attendees 2014 Annual Merit Review Results Report - Merit Review Attendees Merit review of DOE Vehicle Technologies research activities 2014amr13.pdf (833.06 KB) ...

  20. 2014 Annual Merit Review Results Report - Acronyms | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Acronyms 2014 Annual Merit Review Results Report - Acronyms Merit review of DOE Vehicle Technologies research activities 2014amr10.pdf (456.52 KB) More Documents & Publications ...