National Library of Energy BETA

Sample records for techniques cxs applied

  1. Applied Science/Techniques

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Applied ScienceTechniques Print The ALS is an excellent incubator of new scientific techniques and instrumentation. Many of the technical advances that make the ALS a world-class...

  2. Applied ALARA techniques

    SciTech Connect

    Waggoner, L.O.

    1998-02-05

    The presentation focuses on some of the time-proven and new technologies being used to accomplish radiological work. These techniques can be applied at nuclear facilities to reduce radiation doses and protect the environment. The last reactor plants and processing facilities were shutdown and Hanford was given a new mission to put the facilities in a safe condition, decontaminate, and prepare them for decommissioning. The skills that were necessary to operate these facilities were different than the skills needed today to clean up Hanford. Workers were not familiar with many of the tools, equipment, and materials needed to accomplish:the new mission, which includes clean up of contaminated areas in and around all the facilities, recovery of reactor fuel from spent fuel pools, and the removal of millions of gallons of highly radioactive waste from 177 underground tanks. In addition, this work has to be done with a reduced number of workers and a smaller budget. At Hanford, facilities contain a myriad of radioactive isotopes that are 2048 located inside plant systems, underground tanks, and the soil. As cleanup work at Hanford began, it became obvious early that in order to get workers to apply ALARA and use hew tools and equipment to accomplish the radiological work it was necessary to plan the work in advance and get radiological control and/or ALARA committee personnel involved early in the planning process. Emphasis was placed on applying,ALARA techniques to reduce dose, limit contamination spread and minimize the amount of radioactive waste generated. Progress on the cleanup has,b6en steady and Hanford workers have learned to use different types of engineered controls and ALARA techniques to perform radiological work. The purpose of this presentation is to share the lessons learned on how Hanford is accomplishing radiological work.

  3. Applied Science/Techniques

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    New Spectroscopic Technique Reveals the Dynamics of Operating Battery Electrodes ... The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into Focus Laser ...

  4. Balanced pressure techniques applied to geothermal drilling

    SciTech Connect

    Dareing, D.W.

    1981-08-01

    The objective of the study is to evaluate balanced pressure drilling techniques for use in combating lost circulation in geothermal drilling. Drilling techniques evaluated are: aerated drilling mud, parasite tubing, concentric drill pipe, jet sub, and low density fluids. Based on the present state of the art of balanced pressure drilling techniques, drilling with aerated water has the best overall balance of performance, risk, availability, and cost. Aerated water with a 19:1 free air/water ratio reduce maximum pressure unbalance between wellbore and formation pressures from 1000 psi to 50 psi. This pressure unbalance is within acceptable operating limits; however, air pockets could form and cause pressure surges in the mud system due to high percent of air. Low density fluids used with parasite tubing has the greatest potential for combating lost circulation in geothermal drilling, when performance only is considered. The top portion of the hole would be aerated through the parasite tube at a 10:1 free air/mud ratio and the low density mud could be designed so that its pressure gradient exactly matches the formation pore pressure gradient. The main problem with this system at present is the high cost of ceramic beads needed to produce low density muds.

  5. Applying machine learning techniques to DNA sequence analysis

    SciTech Connect

    Shavlik, J.W.

    1992-01-01

    We are developing a machine learning system that modifies existing knowledge about specific types of biological sequences. It does this by considering sample members and nonmembers of the sequence motif being learned. Using this information (which we call a domain theory''), our learning algorithm produces a more accurate representation of the knowledge needed to categorize future sequences. Specifically, the KBANN algorithm maps inference rules, such as consensus sequences, into a neural (connectionist) network. Neural network training techniques then use the training examples of refine these inference rules. We have been applying this approach to several problems in DNA sequence analysis and have also been extending the capabilities of our learning system along several dimensions.

  6. Machine Learning Techniques Applied to Sensor Data Correction...

    Office of Scientific and Technical Information (OSTI)

    Given this reliance on sensors, ensuring that sensor data are valid is a crucial problem. Solutions being researched are machine learning techniques, namely: artificial neural ...

  7. Technology Assessment of Dust Suppression Techniques applied During Structural Demolition

    SciTech Connect

    Boudreaux, J.F.; Ebadian, M.A.; Dua, S.K.

    1997-08-06

    Hanford, Fernald, Savannah River, and other sites are currently reviewing technologies that can be implemented to demolish buildings in a cost-effective manner. In order to demolish a structure and, at the same time, minimize the amount of dust generated by a given technology, an evaluation must be conducted to choose the most appropriate dust suppression technology. Thus, the purpose of this research, which was conducted by the Hemispheric Center for Environmental Technology (HCET) at Florida International University (FIU), was to perform an experimental study of dust aerosol abatement (dust suppression) methods as applied to nuclear D and D. This experimental study specifically targeted the problem of dust suppression during demolition. The resulting data were used in the development of mathematical correlations that can be applied to structural demolition. In the Fiscal Year 1996 (FY96), the effectiveness of different dust suppressing agents was investigated for different types of concrete blocks. Initial tests were conducted in a broad particle size range. In Fiscal Year 1997 (FY97), additional tests were performed in the size range in which most of the particles were detected. Since particle distribution is an important parameter for predicting deposition in various compartments of the human respiratory tract, various tests were aimed at determining the particle size distribution of the airborne dust particles. The effectiveness of dust suppressing agents for particles of various size was studied. Instead of conducting experiments on various types of blocks, it was thought prudent to carry out additional tests on blocks of the same type. Several refinements were also incorporated in the test procedures and data acquisition system used in FY96.

  8. Cleaning techniques for applied-B ion diodes

    SciTech Connect

    Cuneo, M.E.; Menge, P.R.; Hanson, D.L.

    1995-09-01

    Measurements and theoretical considerations indicate that the lithium-fluoride (LiF) lithium ion source operates by electron-assisted field-desorption, and provides a pure lithium beam for 10--20 ns. Evidence on both the SABRE (1 TW) and PBFA-II (20 TW) accelerators indicates that the lithium beam is replaced by a beam of protons, and carbon resulting from electron thermal desorption of hydrocarbon surface and bulk contamination with subsequent avalanche ionization. Appearance of contaminant ions in the beam is accompanied by rapid impedance collapse, possibly resulting from loss of magnetic insulation in the rapidly expanding and ionizing, neutral layer. Electrode surface and source substrate cleaning techniques are being developed on the SABRE accelerator to reduce beam contamination, plasma formation, and impedance collapse. We have increased lithium current density a factor of 3 and lithium energy a factor of 5 through a combination of in-situ surface and substrate coatings, impermeable substrate coatings, and field profile modifications.

  9. Apply

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Applied Studies and Technology (AS&T) Applied Studies and Technology (AS&T) Applied Studies and Technology (AS&T) DOE established the Environmental Sciences Laboratory (ESL) in Grand Junction, Colorado, in 1991 to support its programs. ESL scientists perform applied research and laboratory-scale demonstrations of soil and groundwater remediation and treatment technologies. Capabilities Installation, monitoring, and operation of permeable reactive barriers Research of permeable

  10. Apply

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Apply Application Process Bringing together top space science students with internationally recognized researchers at Los Alamos in an educational and collaborative atmosphere. ...

  11. The Atomic AXAFS and XANES Techniques as Applied to Heterogeneous Catalysis and Electrocatalysis

    SciTech Connect

    Ramaker, D.; Koningsberger, D

    2010-01-01

    X-Ray absorption spectroscopy (XAFS) is an attractive in situ and in operando technique. In recent years, the more conventional extended X-ray absorption fine structure (EXAFS) data analysis technique has been complemented by two newer analysis methods: the 'atomic' XAFS (AXAFS) technique, which analyzes the scattering from the absorber atom itself, and the {Delta}{mu} XANES technique, which uses a difference method to isolate the changes in the X-ray absorption near edge structure (XANES) due to adsorbates on a metal surface. With AXAFS it is possible to follow the electronic effect a support has on a metal particle; with {Delta}{mu} XANES it is possible to determine the adsorbate, the specific adsorption sites and adsorbate coverage on a metal catalyst. This unprecedented new information helps a great deal to unravel the complex kinetic mechanisms operating in working reactors or fuelcell systems. The fundamental principles and methodology for applying the AXAFS and {Delta}{mu} XANES techniques are given here, and then specific applications are summarized, including H adsorption on supported Pt in the gas phase, wateractivation at a Pt cathode and methanol oxidation at a Pt anode in an electrochemical cell, sulfur oxidation on Pt, and oxygenreduction on a Au/SnO{sub x} cathode. Finally, the future outlook for time and/or space resolved applications of these techniques is contemplated.

  12. Applying machine learning techniques to DNA sequence analysis. Progress report, February 14, 1991--February 13, 1992

    SciTech Connect

    Shavlik, J.W.

    1992-04-01

    We are developing a machine learning system that modifies existing knowledge about specific types of biological sequences. It does this by considering sample members and nonmembers of the sequence motif being learned. Using this information (which we call a ``domain theory``), our learning algorithm produces a more accurate representation of the knowledge needed to categorize future sequences. Specifically, the KBANN algorithm maps inference rules, such as consensus sequences, into a neural (connectionist) network. Neural network training techniques then use the training examples of refine these inference rules. We have been applying this approach to several problems in DNA sequence analysis and have also been extending the capabilities of our learning system along several dimensions.

  13. Vibration monitoring/diagnostic techniques, as applied to reactor coolant pumps

    SciTech Connect

    Sculthorpe, B.R.; Johnson, K.M.

    1986-01-01

    With the increased awareness of reactor coolant pump (RCP) cracked shafts, brought about by the catastrophic shaft failure at Crystal River number3, Florida Power and Light Company, in conjunction with Bently Nevada Corporation, undertook a test program at St. Lucie Nuclear Unit number2, to confirm the integrity of all four RCP pump shafts. Reactor coolant pumps play a major roll in the operation of nuclear-powered generation facilities. The time required to disassemble and physically inspect a single RCP shaft would be lengthy, monetarily costly to the utility and its customers, and cause possible unnecessary man-rem exposure to plant personnel. When properly applied, vibration instrumentation can increase unit availability/reliability, as well as provide enhanced diagnostic capability. This paper reviews monitoring benefits and diagnostic techniques applicable to RCPs/motor drives.

  14. Film thickness measurement techniques applied to micro-scale two-phase flow systems

    SciTech Connect

    Tibirica, Cristiano Bigonha; do Nascimento, Francisco Julio; Ribatski, Gherhardt

    2010-05-15

    Recently semi-empirical models to estimate flow boiling heat transfer coefficient, saturated CHF and pressure drop in micro-scale channels have been proposed. Most of the models were developed based on elongated bubbles and annular flows in the view of the fact that these flow patterns are predominant in smaller channels. In these models, the liquid film thickness plays an important role and such a fact emphasizes that the accurate measurement of the liquid film thickness is a key point to validate them. On the other hand, several techniques have been successfully applied to measure liquid film thicknesses during condensation and evaporation under macro-scale conditions. However, although this subject has been targeted by several leading laboratories around the world, it seems that there is no conclusive result describing a successful technique capable of measuring dynamic liquid film thickness during evaporation inside micro-scale round channels. This work presents a comprehensive literature review of the methods used to measure liquid film thickness in macro- and micro-scale systems. The methods are described and the main difficulties related to their use in micro-scale systems are identified. Based on this discussion, the most promising methods to measure dynamic liquid film thickness in micro-scale channels are identified. (author)

  15. Schlieren technique applied to the arc temperature measurement in a high energy density cutting torch

    SciTech Connect

    Prevosto, L.; Mancinelli, B.; Artana, G.; Kelly, H.

    2010-01-15

    Plasma temperature and radial density profiles of the plasma species in a high energy density cutting arc have been obtained by using a quantitative schlieren technique. A Z-type two-mirror schlieren system was used in this research. Due to its great sensibility such technique allows measuring plasma composition and temperature from the arc axis to the surrounding medium by processing the gray-level contrast values of digital schlieren images recorded at the observation plane for a given position of a transverse knife located at the exit focal plane of the system. The technique has provided a good visualization of the plasma flow emerging from the nozzle and its interactions with the surrounding medium and the anode. The obtained temperature values are in good agreement with those values previously obtained by the authors on the same torch using Langmuir probes.

  16. Microsoft Word - NETL-TRS-6-2014_Imaging Techniques Applied to Shales_20141202.docx

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Imaging Techniques for Analyzing Shale Pores and Minerals 2 December 2014 Office of Fossil Energy NETL-TRS-6-2014 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or

  17. An efficient permeability scaling-up technique applied to the discretized flow equations

    SciTech Connect

    Urgelli, D.; Ding, Yu

    1997-08-01

    Grid-block permeability scaling-up for numerical reservoir simulations has been discussed for a long time in the literature. It is now recognized that a full permeability tensor is needed to get an accurate reservoir description at large scale. However, two major difficulties are encountered: (1) grid-block permeability cannot be properly defined because it depends on boundary conditions; (2) discretization of flow equations with a full permeability tensor is not straightforward and little work has been done on this subject. In this paper, we propose a new method, which allows us to get around both difficulties. As the two major problems are closely related, a global approach will preserve the accuracy. So, in the proposed method, the permeability up-scaling technique is integrated in the discretized numerical scheme for flow simulation. The permeability is scaled-up via the transmissibility term, in accordance with the fluid flow calculation in the numerical scheme. A finite-volume scheme is particularly studied, and the transmissibility scaling-up technique for this scheme is presented. Some numerical examples are tested for flow simulation. This new method is compared with some published numerical schemes for full permeability tensor discretization where the full permeability tensor is scaled-up through various techniques. Comparing the results with fine grid simulations shows that the new method is more accurate and more efficient.

  18. Multivariate calibration techniques applied to NIRA (near infrared reflectance analysis) and FTIR (Fourier transform infrared) data

    SciTech Connect

    Long, C.L.

    1991-02-01

    Multivariate calibration techniques can reduce the time required for routine testing and can provide new methods of analysis. Multivariate calibration is commonly used with near infrared reflectance analysis (NIRA) and Fourier transform infrared (FTIR) spectroscopy. Two feasibility studies were performed to determine the capability of NIRA, using multivariate calibration techniques, to perform analyses on the types of samples that are routinely analyzed at this laboratory. The first study performed included a variety of samples and indicated that NIRA would be well-suited to perform analyses on selected materials properties such as water content and hydroxyl number on polyol samples, epoxy content on epoxy resins, water content of desiccants, and the amine values of various amine cure agents. A second study was performed to assess the capability of NIRA to perform quantitative analysis of hydroxyl numbers and water contents of hydroxyl-containing materials. Hydroxyl number and water content were selected for determination because these tests are frequently run on polyol materials and the hydroxyl number determination is time consuming. This study pointed out the necessity of obtaining calibration standards identical to the samples being analyzed for each type of polyol or other material being analyzed. Multivariate calibration techniques are frequently used with FTIR data to determine the composition of a large variety of complex mixtures. A literature search indicated many applications of multivariate calibration to FTIR data. Areas identified where quantitation by FTIR would provide a new capability are quantitation of components in epoxy and silicone resins, polychlorinated biphenyls (PCBs) in oils, and additives to polymers. 19 refs., 15 figs., 6 tabs.

  19. Hybrid Technique in SCALE for Fission Source Convergence Applied to Used Nuclear Fuel Analysis

    SciTech Connect

    Ibrahim, Ahmad M; Peplow, Douglas E.; Bekar, Kursat B; Celik, Cihangir; Scaglione, John M; Ilas, Dan; Wagner, John C

    2013-01-01

    The new hybrid SOURCE ConveRgence accelERator (SOURCERER) sequence in SCALE deterministically computes a fission distribution and uses it as the starting source in a Monte Carlo eigenvalue criticality calculation. In addition to taking the guesswork out of defining an appropriate, problem-dependent starting source, the more accurate starting source provided by the deterministic calculation decreases the probability of producing inaccurate tally estimates associated with undersampling problems caused by inadequate source convergence. Furthermore, SOURCERER can increase the efficiency of the overall simulation by decreasing the number of cycles that has to be skipped before the keff accumulation. SOURCERER was applied to a representative example for a used nuclear fuel cask utilized at the Maine Yankee storage site {Scaglione and Ilas}. Because of the time constraints of the Used Fuel Research, Development, and Demonstration project, it was found that using more than 30,000 neutrons per cycle will lead to inaccurate Monte Carlo calculation of keff due to the inevitable decrease in the number of skipped and active cycles used with this problem. For a fixed uncertainty objective and by using 30,000 neutron per cycle, the use of SOURCERER increased the efficiency of the keff calculation by 60%compared to a Monte Carlo calculation that used a starting source distributed uniformly in fissionable regions, even with the inclusion of the extra computational time required by the deterministic calculation. Additionally, the use of SOURCERER increased the reliability of keff calculation using any number of skipped cycles below 350.

  20. APPLIED PHYTO-REMEDIATION TECHNIQUES USING HALOPHYTES FOR OIL AND BRINE SPILL SCARS

    SciTech Connect

    M.L. Korphage; Bruce G. Langhus; Scott Campbell

    2003-03-01

    Produced salt water from historical oil and gas production was often managed with inadequate care and unfortunate consequences. In Kansas, the production practices in the 1930's and 1940's--before statewide anti-pollution laws--were such that fluids were often produced to surface impoundments where the oil would segregate from the salt water. The oil was pumped off the pits and the salt water was able to infiltrate into the subsurface soil zones and underlying bedrock. Over the years, oil producing practices were changed so that segregation of fluids was accomplished in steel tanks and salt water was isolated from the natural environment. But before that could happen, significant areas of the state were scarred by salt water. These areas are now in need of economical remediation. Remediation of salt scarred land can be facilitated with soil amendments, land management, and selection of appropriate salt tolerant plants. Current research on the salt scars around the old Leon Waterflood, in Butler County, Kansas show the relative efficiency of remediation options. Based upon these research findings, it is possible to recommend cost efficient remediation techniques for slight, medium, and heavy salt water damaged soil. Slight salt damage includes soils with Electrical Conductivity (EC) values of 4.0 mS/cm or less. Operators can treat these soils with sufficient amounts of gypsum, install irrigation systems, and till the soil. Appropriate plants can be introduced via transplants or seeded. Medium salt damage includes soils with EC values between 4.0 and 16 mS/cm. Operators will add amendments of gypsum, till the soil, and arrange for irrigation. Some particularly salt tolerant plants can be added but most planting ought to be reserved until the second season of remediation. Severe salt damage includes soil with EC values in excess of 16 mS/cm. Operators will add at least part of the gypsum required, till the soil, and arrange for irrigation. The following seasons more

  1. Fielding the magnetically applied pressure-shear technique on the Z accelerator (completion report for MRT 4519).

    SciTech Connect

    Alexander, C. Scott; Haill, Thomas A.; Dalton, Devon Gardner; Rovang, Dean Curtis; Lamppa, Derek C.

    2013-09-01

    The recently developed Magnetically Applied Pressure-Shear (MAPS) experimental technique to measure material shear strength at high pressures on magneto-hydrodynamic (MHD) drive pulsed power platforms was fielded on August 16, 2013 on shot Z2544 utilizing hardware set A0283A. Several technical and engineering challenges were overcome in the process leading to the attempt to measure the dynamic strength of NNSA Ta at 50 GPa. The MAPS technique relies on the ability to apply an external magnetic field properly aligned and time correlated with the MHD pulse. The load design had to be modified to accommodate the external field coils and additional support was required to manage stresses from the pulsed magnets. Further, this represents the first time transverse velocity interferometry has been applied to diagnose a shot at Z. All subsystems performed well with only minor issues related to the new feed design which can be easily addressed by modifying the current pulse shape. Despite the success of each new component, the experiment failed to measure strength in the samples due to spallation failure, most likely in the diamond anvils. To address this issue, hydrocode simulations are being used to evaluate a modified design using LiF windows to minimize tension in the diamond and prevent spall. Another option to eliminate the diamond material from the experiment is also being investigated.

  2. UQ and V&V techniques applied to experiments and simulations of heated pipes pressurized to failure.

    SciTech Connect

    Romero, Vicente Jose; Dempsey, J. Franklin; Antoun, Bonnie R.

    2014-05-01

    This report demonstrates versatile and practical model validation and uncertainty quantification techniques applied to the accuracy assessment of a computational model of heated steel pipes pressurized to failure. The Real Space validation methodology segregates aleatory and epistemic uncertainties to form straightforward model validation metrics especially suited for assessing models to be used in the analysis of performance and safety margins. The methodology handles difficulties associated with representing and propagating interval and/or probabilistic uncertainties from multiple correlated and uncorrelated sources in the experiments and simulations including: material variability characterized by non-parametric random functions (discrete temperature dependent stress-strain curves); very limited (sparse) experimental data at the coupon testing level for material characterization and at the pipe-test validation level; boundary condition reconstruction uncertainties from spatially sparse sensor data; normalization of pipe experimental responses for measured input-condition differences among tests and for random and systematic uncertainties in measurement/processing/inference of experimental inputs and outputs; numerical solution uncertainty from model discretization and solver effects.

  3. Determination of photocarrier density under continuous photoirradiation using spectroscopic techniques as applied to polymer: Fullerene blend films

    SciTech Connect

    Kanemoto, Katsuichi Nakatani, Hitomi; Domoto, Shinya

    2014-10-28

    We propose a method to determine the density of photocarrier under continuous photoirradiation in conjugated polymers using spectroscopic signals obtained by photoinduced absorption (PIA) measurements. The bleaching signals in the PIA measurements of polymer films and the steady-state absorption signals of oxidized polymer solution are employed to determine the photocarrier density. The method is applied to photocarriers of poly (3-hexylthiophene) (P3HT) in a blended film consisting of P3HT and [6,6]-phenyl C61 butyric acid methyl ester (PCBM). The photocarrier density under continuous photoirradiation of 580 mW/cm{sup 2} is determined to be 3.5 × 10{sup 16 }cm{sup −3}. Using a trend of the carrier density increasing in proportion to the square root of photo-excitation intensity, we provide a general formula to estimate the photocarrier density under simulated 1 sun solar irradiation for the P3HT: PCBM film of an arbitrary thickness. We emphasize that the method proposed in this study enables an estimate of carrier density without measuring a current and can be applied to films with no electrodes as well as to devices.

  4. Enhanced performance of CdS/CdTe thin-film devices through temperature profiling techniques applied to close-spaced sublimation deposition

    SciTech Connect

    Xiaonan Li; Sheldon, P.; Moutinho, H.; Matson, R.

    1996-05-01

    The authors describe a methodology developed and applied to the close-spaced sublimation technique for thin-film CdTe deposition. The developed temperature profiles consisted of three discrete temperature segments, which the authors called the nucleation, plugging, and annealing temperatures. They have demonstrated that these temperature profiles can be used to grow large-grain material, plug pinholes, and improve CdS/CdTe photovoltaic device performance by about 15%. The improved material and device properties have been obtained while maintaining deposition temperatures compatible with commercially available substrates. This temperature profiling technique can be easily applied to a manufacturing environment by adjusting the temperature as a function of substrate position instead of time.

  5. Analysis of the Galvanostatic Intermittent Titration Technique (GITT) as applied to a lithium-Ion porous electrode.

    SciTech Connect

    Dees, D. W.; Kawauchi, S.; Abraham, D. P.; Prakash, J.; Chemical Sciences and Engineering Division; Toyota Central R&D Labs Inc.; Illinois Inst. of Tech.

    2009-04-01

    Galvanostatic Intermittent Titration Technique (GITT) experiments were conducted to determine the lithium diffusion coefficient of LiNi{sub 0.8}Co{sub 0.15}Al{sub 0.05}O{sub 2}, used as the active material in a lithium-ion battery porous composite positive electrode. An electrochemical model, based on concentrated solution porous electrode theory, was developed to analyze the GITT experimental results and compare to the original GITT analytical theory. The GITT experimental studies on the oxide active material were conducted between 3.5 and 4.5 V vs. lithium, with the maximum lithium diffusion coefficient value being 10{sup -10} cm{sup 2} s{sup -1} at 3.85 V. The lithium diffusion coefficient values obtained from this study agree favorably with the values obtained from an earlier electrochemical impedance spectroscopy study.

  6. Magnetically applied pressure-shear : a new technique for direct strength measurement at high pressure (final report for LDRD project 117856).

    SciTech Connect

    Lamppa, Derek C.; Haill, Thomas A.; Alexander, C. Scott; Asay, James Russell

    2010-09-01

    A new experimental technique to measure material shear strength at high pressures has been developed for use on magneto-hydrodynamic (MHD) drive pulsed power platforms. By applying an external static magnetic field to the sample region, the MHD drive directly induces a shear stress wave in addition to the usual longitudinal stress wave. Strength is probed by passing this shear wave through a sample material where the transmissible shear stress is limited to the sample strength. The magnitude of the transmitted shear wave is measured via a transverse VISAR system from which the sample strength is determined.

  7. Oxygen Reduction Reaction Measurements on Platinum Electrocatalysts Utilizing Rotating Disk Electrode Technique: I. Impact of Impurities, Measurement Protocols and Applied Corrections

    SciTech Connect

    Shinozaki, Kazuma; Zack, Jason W.; Richards, Ryan M.; Pivovar, Bryan S.; Kocha, Shyam S.

    2015-07-22

    The rotating disk electrode (RDE) technique is being extensively used as a screening tool to estimate the activity of novel PEMFC electrocatalysts synthesized in lab-scale (mg) quantities. Discrepancies in measured activity attributable to glassware and electrolyte impurity levels, as well as conditioning, protocols and corrections are prevalent in the literature. Moreover, the electrochemical response to a broad spectrum of commercially sourced perchloric acid and the effect of acid molarity on impurity levels and solution resistance were also assessed. Our findings reveal that an area specific activity (SA) exceeding 2.0 mA/cm2 (20 mV/s, 25°C, 100 kPa, 0.1 M HClO4) for polished poly-Pt is an indicator of impurity levels that do not impede the accurate measurement of the ORR activity of Pt based catalysts. After exploring various conditioning protocols to approach maximum utilization of the electrochemical area (ECA) and peak ORR activity without introducing catalyst degradation, an investigation of measurement protocols for ECA and ORR activity was conducted. Down-selected protocols were based on the criteria of reproducibility, duration of experiments, impurity effects and magnitude of pseudo-capacitive background correction. In sum, statistical reproducibility of ORR activity for poly-Pt and Pt supported on high surface area carbon was demonstrated.

  8. Oxygen Reduction Reaction Measurements on Platinum Electrocatalysts Utilizing Rotating Disk Electrode Technique: I. Impact of Impurities, Measurement Protocols and Applied Corrections

    DOE PAGES [OSTI]

    Shinozaki, Kazuma; Zack, Jason W.; Richards, Ryan M.; Pivovar, Bryan S.; Kocha, Shyam S.

    2015-07-22

    The rotating disk electrode (RDE) technique is being extensively used as a screening tool to estimate the activity of novel PEMFC electrocatalysts synthesized in lab-scale (mg) quantities. Discrepancies in measured activity attributable to glassware and electrolyte impurity levels, as well as conditioning, protocols and corrections are prevalent in the literature. Moreover, the electrochemical response to a broad spectrum of commercially sourced perchloric acid and the effect of acid molarity on impurity levels and solution resistance were also assessed. Our findings reveal that an area specific activity (SA) exceeding 2.0 mA/cm2 (20 mV/s, 25°C, 100 kPa, 0.1 M HClO4) for polishedmore » poly-Pt is an indicator of impurity levels that do not impede the accurate measurement of the ORR activity of Pt based catalysts. After exploring various conditioning protocols to approach maximum utilization of the electrochemical area (ECA) and peak ORR activity without introducing catalyst degradation, an investigation of measurement protocols for ECA and ORR activity was conducted. Down-selected protocols were based on the criteria of reproducibility, duration of experiments, impurity effects and magnitude of pseudo-capacitive background correction. In sum, statistical reproducibility of ORR activity for poly-Pt and Pt supported on high surface area carbon was demonstrated.« less

  9. (Optical characterization techniques applied to ceramic oxides)

    SciTech Connect

    Abraham, M.M.

    1990-10-15

    The traveler collaborated with M.J.M. Leask, J.M. Baker, B. Bleaney, and others at the Clarendon Laboratory, Oxford University, Oxford, UK, to Study Tetragonal rare-earth phosphates and vanadates by optical and magnetic spectroscopy. This work is related to similar studies that have been performed at ORNL by the Synthesis and Properties of Novel Materials Group in the Solid State Division.

  10. Miscible Applied Simulation Techniques for Energy Recovery

    Energy Science and Technology Software Center

    2005-07-01

    During the use of MASTER at the New Mexico Petroleum Recovery Research Center (PRRC) as research division of New Mexico Institute of Mining and Technology a number of modification have been made to the original MASTER. We have worked at minimizing programming errors and incorporating a foaming option for surfactant solution (aqueous phase) injection altemating with gas (SAG) The original program checks and modifications performed at PRRC were under the direction of Dr. Shih-Hsien Changmore » under previous DOE contracts. The final modifications and completion of the documentation were performed by Dr. Zhengwen Zeng under DOE Contract Number DE-FG26-01BC15364. Drs. Chang and Zeng worked under Dr. Reid B. Grigg in the Gas Flooding Processes and Flow Heterogeneities Section of PRRC. This work is not intended to have any long-term support from the PRRC, but any errors should be reported to the Department of Energy for inclusion in future releases of MASTER. MASTER is an effective reservoir simulator for modeling a number of fluid flow problems and is a straight forward and economical program. We thank the Department of Energy for the original development of this program and the availability for our use.« less

  11. Applied combustion

    SciTech Connect

    1993-12-31

    From the title, the reader is led to expect a broad practical treatise on combustion and combustion devices. Remarkably, for a book of modest dimension, the author is able to deliver. The text is organized into 12 Chapters, broadly treating three major areas: combustion fundamentals -- introduction (Ch. 1), thermodynamics (Ch. 2), fluid mechanics (Ch. 7), and kinetics (Ch. 8); fuels -- coal, municipal solid waste, and other solid fuels (Ch. 4), liquid (Ch. 5) and gaseous (Ch. 6) fuels; and combustion devices -- fuel cells (Ch. 3), boilers (Ch. 4), Otto (Ch. 10), diesel (Ch. 11), and Wankel (Ch. 10) engines and gas turbines (Ch. 12). Although each topic could warrant a complete text on its own, the author addresses each of these major themes with reasonable thoroughness. Also, the book is well documented with a bibliography, references, a good index, and many helpful tables and appendices. In short, Applied Combustion does admirably fulfill the author`s goal for a wide engineering science introduction to the general subject of combustion.

  12. Responses of Cell Renewal Systems to Long-term Low-Level Radiation Exposure: A Feasibility Study Applying Advanced Molecular Biology Techniques on Available Histological and Cytological Material of Exposed Animals and Men

    SciTech Connect

    Fliedner Theodor M.; Feinendegen Ludwig E.; Meineke Viktor; Fritz Thomas E.

    2005-02-28

    First results of this feasibility study showed that evaluation of the stored material of the chronically irradiated dogs with modern molecular biological techniques proved to be successful and extremely promising. Therefore an in deep analysis of at least part of the huge amount of remaining material is of outmost interest. The methods applied in this feasibility study were pathological evaluation with different staining methods, protein analysis by means of immunohistochemistry, strand break analysis with the TdT-assay, DNA- and RNA-analysis as well as genomic examination by gene array. Overall more than 50% of the investigated material could be used. In particular the results of an increased stimulation of the immune system within the dogs of the 3mSv group as both compared to the control and higher dose groups gives implications for the in depth study of the cellular events occurring in context with low dose radiation. Based on the findings of this study a further evaluation and statistically analysis of more material can help to identify promising biomarkers for low dose radiation. A systematic evaluation of a correlation of dose rates and strand breaks within the dog tissue might moreover help to explain mechanisms of tolerance to IR. One central problem is that most sequences for dog specific primers are not known yet. The discovery of the dog genome is still under progress. In this study the isolation of RNA within the dog tissue was successful. But up to now there are no gene arrays or gene chips commercially available, tested and adapted for canine tissue. The uncritical use of untested genomic test systems for canine tissue seems to be ineffective at the moment, time consuming and ineffective. Next steps in the investigation of genomic changes after IR within the stored dog tissue should be limited to quantitative RT-PCR of tested primer sequences for the dog. A collaboration with institutions working in the field of the discovery of the dog genome could

  13. Gravity Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    in density, such as at fault contacts. 2 Gravity techniques are also applied towards reservoir monitoring for subsidence and mass gain or loss within a geothermal reservoir...

  14. Low temperature material bonding technique

    DOEpatents

    Ramsey, J. Michael (Knoxville, TN); Foote, Robert S. (Oak Ridge, TN)

    2002-02-12

    A method of performing a lower temperature bonding technique to bond together two mating pieces of glass includes applying a sodium silicate aqueous solution between the two pieces.

  15. Low Temperature Material Bonding Technique

    DOEpatents

    Ramsey, J. Michael (Knoxville, TN); Foote, Robert S. (Oak Ridge, TN)

    2000-10-10

    A method of performing a lower temperature bonding technique to bond together two mating pieces of glass includes applying a sodium silicate aqueous solution between the two pieces.

  16. What is the best method to fit time-resolved data? A comparison of the residual minimization and the maximum likelihood techniques as applied to experimental time-correlated, single-photon counting data

    DOE PAGES [OSTI]

    Santra, Kalyan; Zhan, Jinchun; Song, Xueyu; Smith, Emily A.; Vaswani, Namrata; Petrich, Jacob W.

    2016-02-10

    The need for measuring fluorescence lifetimes of species in subdiffraction-limited volumes in, for example, stimulated emission depletion (STED) microscopy, entails the dual challenge of probing a small number of fluorophores and fitting the concomitant sparse data set to the appropriate excited-state decay function. This need has stimulated a further investigation into the relative merits of two fitting techniques commonly referred to as “residual minimization” (RM) and “maximum likelihood” (ML). Fluorescence decays of the well-characterized standard, rose bengal in methanol at room temperature (530 ± 10 ps), were acquired in a set of five experiments in which the total number ofmore » “photon counts” was approximately 20, 200, 1000, 3000, and 6000 and there were about 2–200 counts at the maxima of the respective decays. Each set of experiments was repeated 50 times to generate the appropriate statistics. Each of the 250 data sets was analyzed by ML and two different RM methods (differing in the weighting of residuals) using in-house routines and compared with a frequently used commercial RM routine. Convolution with a real instrument response function was always included in the fitting. While RM using Pearson’s weighting of residuals can recover the correct mean result with a total number of counts of 1000 or more, ML distinguishes itself by yielding, in all cases, the same mean lifetime within 2% of the accepted value. For 200 total counts and greater, ML always provides a standard deviation of <10% of the mean lifetime, and even at 20 total counts there is only 20% error in the mean lifetime. Here, the robustness of ML advocates its use for sparse data sets such as those acquired in some subdiffraction-limited microscopies, such as STED, and, more importantly, provides greater motivation for exploiting the time-resolved capacities of this technique to acquire and analyze fluorescence lifetime data.« less

  17. How To Apply

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    CSCNSI How To Apply How to Apply for Computer System, Cluster, and Networking Summer Institute Emphasizes practical skills development Contact Leader Stephan Eidenbenz (505)...

  18. Confirmation of standard error analysis techniques applied to...

    Office of Scientific and Technical Information (OSTI)

    reported parameter errors are not reliable in many EXAFS studies in the literature. ... Country of Publication: United States Language: English Subject: 75; ABSORPTION; ACCURACY; ...

  19. Measurement uncertainty analysis techniques applied to PV performance measurements

    SciTech Connect

    Wells, C.

    1992-10-01

    The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis? It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment`s final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis? A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results.

  20. Measurement uncertainty analysis techniques applied to PV performance measurements

    SciTech Connect

    Wells, C.

    1992-10-01

    The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment's final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results.

  1. How to Apply

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Apply » How to Apply How to Apply Information and tips to help you apply for a career at the Laboratory Contact applyhelp@lanl.gov (505) 665-4444, opt. 1 Monday-Friday 8 am-5 pm Join the Lab team Access our application or browse jobs To apply for or browse jobs, go to iRecruitment at jobs.lanl.gov. Search for jobs three ways: Click any of the Quick Links to browse jobs in specific categories. Click a Job Category, then the Search button, for jobs in a single category. Tip: To select more than

  2. How To Apply

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    How To Apply How to Apply to the Computer System, Cluster, and Networking Summer Institute Emphasizes practical skills development. Contacts Program Lead Carolyn Connor (505) 665-9891 Email Professional Staff Assistant Nickole Aguilar Garcia (505) 665-3048 Email Applications are due on or before December 1, 2016. Undergraduate and graduate students in computer science, engineering, and information technology related majors are encouraged to apply. Must be a U.S. Citizen. 2017 Application

  3. Applied Computer Science

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    7 Applied Computer Science Innovative co-design of applications, algorithms, and architectures in order to enable scientific simulations at extreme scale Leadership Group Leader ...

  4. Applied & Computational Math

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    & Computational Math - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us ... Twitter Google + Vimeo GovDelivery SlideShare Applied & Computational Math HomeEnergy ...

  5. Brazing technique

    DOEpatents

    Harast, Donald G.

    1986-01-01

    A method of brazing comprises sand blasting the surfaces of the components to be brazed with particles of a brazing material to clean the surfaces and to embed brazing material in the surfaces, applying the brazing material to the surfaces, and heating the brazing material to form a brazement between the components.

  6. Diagnostic techniques used in AVLIS

    SciTech Connect

    Heestand, G.M.; Beeler, R.G.

    1992-12-01

    This is the second part of a general overview talk on the atomic vapor laser isotope separation (AVLIS) process. In this presentation the authors will discuss the diagnostic techniques used to measure key parameters in their atomic vapor including densities, temperature, velocities charge exchange rates and background ionization levels. Although these techniques have been extensively applied to their uranium program they do have applicability to other systems. Relevant data demonstrating these techniques will be shown.

  7. Weld braze technique

    DOEpatents

    Kanne, Jr., William R.; Kelker, Jr., John W.; Alexander, Robert J.

    1982-01-01

    High-strength metal joints are formed by a combined weld-braze technique. A hollow cylindrical metal member is forced into an undersized counterbore in another metal member with a suitable braze metal disposed along the bottom of the counterbore. Force and current applied to the members in an evacuated chamber results in the concurrent formation of the weld along the sides of the counterbore and a braze along the bottom of the counterbore in one continuous operation.

  8. Electrochemical Techniques

    SciTech Connect

    Chen, Gang; Lin, Yuehe

    2008-07-20

    Sensitive and selective detection techniques are of crucial importance for capillary electrophoresis (CE), microfluidic chips, and other microfluidic systems. Electrochemical detectors have attracted considerable interest for microfluidic systems with features that include high sensitivity, inherent miniaturization of both the detection and control instrumentation, low cost and power demands, and high compatibility with microfabrication technology. The commonly used electrochemical detectors can be classified into three general modes: conductimetry, potentiometry, and amperometry.

  9. Applied Cathode Enhancement and

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Applied Cathode Enhancement and Robustness Technologies (ACERT) Team Our project team, a part of Los Alamos National Laboratory (LANL) comprised of world leading experts from fields of accelerator design & testing, chemical synthesis of nanomaterials (quantum dots), and shielding application of nanomaterials (graphene and other atomically-thin sheets). Our goal is to develop and demonstrate 'designer' cold cathode electron sources with tunable parameters (bandgap, efficiency, optical

  10. Applied Computer Science

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    7 Applied Computer Science Innovative co-design of applications, algorithms, and architectures in order to enable scientific simulations at extreme scale Leadership Group Leader Linn Collins Email Deputy Group Leader David Daniel (Acting) Email Professional Assistant Erika Maestas 505-664-0673 Email Climate modeling visualization Results from a climate simulation computed using the Model for Prediction Across Scales (MPAS) code. This visualization shows the temperature of ocean currents using a

  11. Applied Modern Physics

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ADEPS » Physics » P-21 Applied Modern Physics From the first bionic eye to airport scanners that detect liquid explosives, our expertise in developing advanced diagnostics results in real-world innovations. Contact Us Group Leader (acting) John George Email Deputy Group Leader Larry Schultz Email Group Office (505) 665-2545 Email QkarD Quantum key distribution technology could ensure truly secure commerce, banking, communications and data transfer. Read more... A history of excellence in the

  12. Information Science, Computing, Applied Math

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Information Science, Computing, Applied Math Information Science, Computing, Applied Math National security depends on science and technology. The United States relies on Los ...

  13. ORISE: Applied health physics projects

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Applied health physics projects The Oak Ridge Institute for Science and Education (ORISE) provides applied health physics services to government agencies needing technical support ...

  14. Twistor inspired techniques in QCD

    SciTech Connect

    Duhr, C.

    2008-08-29

    I present a short review of the new twistor inspired techniques in perturbative QCD, which are the result of Witten's conjecture of a duality between twistors and string theory. I give an introduction to the main two tree-level techniques, the BCFW recursion and the CSW formalism, and show how the idea of using on-shell QCD amplitudes evaluated for complex momenta can lead to efficient techniques to perform analytic computations. Finally, I briefly discuss how these ideas can be applied to loop calculations if they are combined to the generalized unitarity approach.

  15. CX-100743 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CX-100743 Categorical Exclusion Determination Biomass Gasification for Chemicals Production Using Chemical Looping Techniques Award Number: DE-EE0007530 CX(s) Applied: A9, B3.6 ...

  16. CX-010498: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Crush and Disperse Specimen Preparation Technique CX(s) Applied: B3.6 Date: 05/09/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  17. CX-009479: Categorical Exclusion Determination

    Energy.gov [DOE]

    Development of Improved Caprock Integrity and Risk Assessment Techniques CX(s) Applied: A9 Date: 10/09/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory

  18. CX-009478: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Development of Improved Caprock Integrity and Risk Assessment Techniques CX(s) Applied: A9 Date: 10/09/2012 Location(s): California Offices(s): National Energy Technology Laboratory

  19. CX-011551: Categorical Exclusion Determination

    Energy.gov [DOE]

    Microwave Readout Techniques for Very Large Arrays of Nuclear Sensors CX(s) Applied: B3.6 Date: 11/25/2013 Location(s): Colorado Offices(s): Idaho Operations Office

  20. CX-009313: Categorical Exclusion Determination

    Energy.gov [DOE]

    Advanced Methane Hydrate Reservoir Modeling Using Rock Physics Techniques CX(s) Applied: A1, A9 Date: 08/30/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory

  1. CX-014152: Categorical Exclusion Determination

    Energy.gov [DOE]

    FBI Shielded Cells Evidentiary Techniques Demonstration CX(s) Applied: B1.2Date: 06/16/2015 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  2. CX-010990: Categorical Exclusion Determination

    Energy.gov [DOE]

    Chrysler Upset Protrusion Joining Technique for Joining Dissimilar Metals CX(s) Applied: A1, A11, B3.6 Date: 09/13/2013 Location(s): CX: none Offices(s): National Energy Technology Laboratory

  3. CX-008227: Categorical Exclusion Determination

    Energy.gov [DOE]

    Recovery Act: Innovative Exploration Techniques for Geothermal Assessment at Jemez Pueblo, New Mexico CX(s) Applied: A9 Date: 04/11/2012 Location(s): New Mexico Offices(s): Golden Field Office

  4. Applied Optoelectronics | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    optical semiconductor devices, packaged optical components, optical subsystems, laser transmitters, and fiber optic transceivers. References: Applied Optoelectronics1...

  5. Apply

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Unofficial transcripts are acceptable. If transcripts are not in English, provide a translation. If grades are not in the U.S.-traditional lettered (A,B,C), or GPA (out of 4.0)...

  6. Applied Materials | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Atomic layer deposition (ALD), plasma ALD, and sputtering techniques to synthesize and or coat membranes, thin films, and particles; Process design for scaling up mesostructured ...

  7. Applied Materials | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search Name: Applied Materials Address: 3050 Bowers Avenue Place: Santa Clara, California Zip: 95054 Sector: Solar Website: www.appliedmaterials.com...

  8. Superhydrophobic Materials Technology-PVC Bonding Techniques

    SciTech Connect

    Hunter, Scott R.; Efird, Marty

    2013-05-03

    The purpose of the technology maturation project was to develop an enhanced application technique for applying diatomaceous earth with pinned polysiloxane oil to PVC pipes and materials. The oil infiltration technique is applied as a spray of diluted oil in a solvent onto the superhydrophobic diatomaceous earth substrate. This makes the surface take on the following characteristics: wet-cleanable; anti-biofouling; waterproof; and anti-corrosion. The project involved obtaining input and supplies from VeloxFlow and the development of successful techniques that would quickly result in a commercial license agreement with VeloxFlow and other companies that use PVC materials in a variety of other fields of use.

  9. Evaluation of Techniques to Detect Significant Network Performance...

    Office of Scientific and Technical Information (OSTI)

    results compare and evaluate the accuracy of our detection techniques when applied to step downup, diurnal changes and congestion effects. less Authors: Cottrell, R.Les ;...

  10. Applied Sedimentology | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Sedimentology Jump to: navigation, search OpenEI Reference LibraryAdd to library Book: Applied Sedimentology Author R.C. Salley Published Academic Press, 2000 DOI Not Provided...

  11. Information Science, Computing, Applied Math

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Information Science, Computing, Applied Math Information Science, Computing, Applied Math National security depends on science and technology. The United States relies on Los Alamos National Laboratory for the best of both. No place on Earth pursues a broader array of world-class scientific endeavors. Computer, Computational, and Statistical Sciences (CCS)» High Performance Computing (HPC)» Extreme Scale Computing, Co-design» supercomputing into the future Overview Los Alamos Asteroid Killer

  12. ORISE: Applied health physics projects

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Applied health physics projects The Oak Ridge Institute for Science and Education (ORISE) provides applied health physics services to government agencies needing technical support for decommissioning projects. Whether the need is assistance with the development of technical basis documents or advice on how to identify, measure and assess the presence of radiological materials, ORISE can help determine the best course for an environmental cleanup project. Our key areas of expertise include fuel

  13. NREL Researchers Apply New Extreme Condition Wave Response Methodology |

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Water | NREL NREL Researchers Apply New Extreme Condition Wave Response Methodology April 13, 2016 Extreme wave-induced loads are often the key cost driver for wave energy converter (WEC) designs. Therefore, in an effort to better understand the effects that extreme wave conditions can have on wave energy applications, researchers at NREL have applied a technique called the most likely extreme response (MLER) method to evaluate the maximum displacement and loads of a point absorber WEC

  14. CRC handbook of applied thermodynamics

    SciTech Connect

    Palmer, D.A. . Research and Development Dept.)

    1987-01-01

    The emphasis of this book is on applied thermodynamics, featuring the stage of development of a process rather than the logical development of thermodynamic principles. It is organized according to the types of problems encountered in industry, such as probing research, process assessment, and process development. The applied principles presented can be used in most areas of industry including oil and gas production and processing, chemical processing, power generation, polymer production, food processing, synthetic fuels production, specialty chemicals and pharmaceuticals production, bioengineered processes, etc.

  15. Summer of Applied Geophysical Experience

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Summer of Applied Geophysical Experience (SAGE) 2016 - Our 34 rd Year! SAGE is a 3-4 week research and education program in exploration geophysics for graduate, undergraduate students, and working professionals based in Santa Fe, NM, U.S.A. Application deadline March 27, 2016, 5:00pm MDT SAGE students, faculty, teaching assistants, and visiting scientists acquire, process and interpret reflection/refraction seismic, magnetotelluric (MT)/electromagnetic (EM), ground penetrating radar (GPR),

  16. Applied Mathematics and Plasma Physics

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ADTSC » T » T-5 Applied Mathematics and Plasma Physics Maintaining mathematic, theory, modeling, and simulation capabilities in a broad set of areas Leadership Group Leader Pieter Swart Email Deputy Group Leader (Acting) Luis Chacon Email Contact Us Administrator Charlotte Lehman Email Electron density simulation Electron density from an orbital-free quantum molecular dynamics simulation for a warm dense plasma of deuterium at density 10 g/cc and temperature 10 eV. Mathematical, theory,

  17. 2009 Applied and Environmental Microbiology GRC

    SciTech Connect

    Nicole Dubilier

    2009-07-12

    The topic of the 2009 Gordon Conference on Applied and Environmental Microbiology is: From Single Cells to the Environment. The Conference will present and discuss cutting-edge research on applied and environmental microbiology with a focus on understanding interactions between microorganisms and the environment at levels ranging from single cells to complex communities. The Conference will feature a wide range of topics such as single cell techniques (including genomics, imaging, and NanoSIMS), microbial diversity at scales ranging from clonal to global, environmental 'meta-omics', biodegradation and bioremediation, metal - microbe interactions, animal microbiomes and symbioses. The Conference will bring together investigators who are at the forefront of their field, and will provide opportunities for junior scientists and graduate students to present their work in poster format and exchange ideas with leaders in the field. Some poster presenters will be selected for short talks. The collegial atmosphere of this Conference, with extensive discussion sessions as well as opportunities for informal gatherings in the afternoons and evenings, provides an ideal setting for scientists from different disciplines to exchange ideas, brainstorm and discuss cross-disciplinary collaborations.

  18. International combustion engines; Applied thermosciences

    SciTech Connect

    Ferguson, C.R.

    1985-01-01

    Focusing on thermodynamic analysis - from the requisite first law to more sophisticated applications - and engine design, this book is an introduction to internal combustion engines and their mechanics. It covers the many types of internal combustion engines, including spark ignition, compression ignition, and stratified charge engines, and examines processes, keeping equations of state simple by assuming constant specific heats. Equations are limited to heat engines and later applied to combustion engines. Topics include realistic equations of state, stroichiometry, predictions of chemical equilibrium, engine performance criteria, and friction, which is discussed in terms of the hydrodynamic theory of lubrication and experimental methods such as dimensional analysis.

  19. Ground Electromagnetic Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Information Exploration Group: Geophysical Techniques Exploration Sub Group: Electrical Techniques Parent Exploration Technique: Electromagnetic Techniques Information...

  20. Contamination Control Techniques

    SciTech Connect

    EBY, J.L.

    2000-05-16

    Welcome to a workshop on contamination Control techniques. This work shop is designed for about two hours. Attendee participation is encouraged during the workshop. We will address different topics within contamination control techniques; present processes, products and equipment used here at Hanford and then open the floor to you, the attendees for your input on the topics.

  1. Electromagnetic Sounding Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Techniques Exploration Sub Group: Electrical Techniques Parent Exploration Technique: Ground Electromagnetic Techniques Information Provided by Technique Lithology: Rock...

  2. Electromagnetic Profiling Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Techniques Exploration Sub Group: Electrical Techniques Parent Exploration Technique: Ground Electromagnetic Techniques Information Provided by Technique Lithology: Rock...

  3. Geostatistics applied to gas reservoirs

    SciTech Connect

    Meunier, G.; Coulomb, C.; Laille, J.P. )

    1989-09-01

    The spatial distribution of many of the physical parameters connected with a gas reservoir is of primary interest to both engineers and geologists throughout the study, development, and operation of a field. It is therefore desirable for the distribution to be capable of statistical interpretation, to have a simple graphical representation, and to allow data to be entered from either two- or three-dimensional grids. To satisfy these needs while dealing with the geographical variables, new methods have been developed under the name geostatistics. This paper describes briefly the theory of geostatistics and its most recent improvements for the specific problem of subsurface description. The external-drift technique has been emphasized in particular, and in addition, four case studies related to gas reservoirs are presented.

  4. Applied Materials Wind Turbine | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Wind Turbine Jump to: navigation, search Name Applied Materials Wind Turbine Facility Applied Materials Sector Wind energy Facility Type Community Wind Facility Status In Service...

  5. Applied Intellectual Capital AIC | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Intellectual Capital AIC Jump to: navigation, search Name: Applied Intellectual Capital (AIC) Place: California Zip: 94501-1010 Product: Applied Intellectual Capital (AIC) was...

  6. Applied Ventures LLC | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Applied Ventures LLC Name: Applied Ventures LLC Address: 3050 Bowers Avenue Place: Santa Clara, California Zip: 95054 Region: Southern CA Area Product: Venture capital. Number...

  7. Building America Expert Meeting: Recommendations for Applying...

    Energy Saver

    Recommendations for Applying Water Heaters in Combination Space and Domestic Water Heating Systems Building America Expert Meeting: Recommendations for Applying Water Heaters in ...

  8. CNEEC - Synchrotron Techniques Tutorial by Profs. Pianetta and Toney

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Synchrotron Techniques

  9. Microsoft Word - NETL-TRS-6-2014_Imaging Techniques Applied to...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... act as seals for carbon storage, and unconventional oil and gas shales show that it may ... Studies have shown that CO 2 can be used as a hydraulic fracturing fluid (Reidenbach et ...

  10. Effect of nonlinear absorption on electric field applied lead chloride by Z-scan technique

    SciTech Connect

    Rejeena, I.; Lillibai,; Nampoori, V. P. N.; Radhakrishnan, P.; Rahimkutty, M. H.

    2014-10-15

    The preparation, spectral response and optical nonlinearity of gel grown lead chloride single crystals subjected to electric field of 20V using parallel plate arrangements have been investigated. Optical band gap of the samples were determined using linear absorption spectra. Open aperture z-scan was employed for the determination of nonlinear absorption coefficient of PbCl{sub 2} solution. The normalized transmittance curve exhibits a valley shows reverse saturable absorption. The non linear absorption at different input fluences were recorded using a single Gaussian laser beam in tight focus geometry. The RSA nature of the sample makes it suitable for optical limiting applications.

  11. AUTOMATED PROCESS MONITORING: APPLYING PROVEN AUTOMATION TECHNIQUES TO INTERNATIONAL SAFEGUARDS NEEDS

    SciTech Connect

    O'Hara, Matthew J.; Durst, Philip C.; Grate, Jay W.; Devol, Timothy A.; Egorov, Oleg; Clements, John P.

    2008-07-13

    Identification and quantification of specific alpha- and beta-emitting radionuclides in complex liquid matrices is highly challenging, and is typically accomplished through laborious wet chemical sample preparation and separations followed by analysis using a variety of detection methodologies (e.g., liquid scintillation, gas proportional counting, alpha energy analysis, mass spectrometry). Analytical results may take days or weeks to report. Chains of custody and sample security measures may also complicate or slow the analytical process. When an industrial process-scale plant requires the monitoring of specific radionuclides as an indication of the composition of its feed stream or of plant performance, radiochemical measurements must be fast, accurate, and reliable. Scientists at Pacific Northwest National Laboratory have assembled a fully automated prototype Process Monitor instrument capable of a variety of tasks: automated sampling directly from a feed stream, sample digestion / analyte redox adjustment, chemical separations, radiochemical detection and data analysis / reporting. The system is compact, its components are fluidically inter-linked, and analytical results could be immediately transmitted to on- or off-site locations. The development of a rapid radiochemical Process Monitor for 99Tc in Hanford tank waste processing streams, capable of performing several measurements per hour, will be discussed in detail. More recently, the automated platform was modified to perform measurements of 90Sr in Hanford tank waste stimulant. The system exemplifies how automation could be integrated into reprocessing facilities to support international nuclear safeguards needs.

  12. Shopping For Danger: E-commerce techniques applied to collaboration in cyber security

    SciTech Connect

    Bruce, Joseph R.; Fink, Glenn A.

    2012-05-24

    Collaboration among cyber security analysts is essential to a successful protection strategy on the Internet today, but it is uncommonly practiced or encouraged in operating environments. Barriers to productive collaboration often include data sensitivity, time and effort to communicate, institutional policy, and protection of domain knowledge. We propose an ambient collaboration framework, Vulcan, designed to remove the barriers of time and effort and mitigate the others. Vulcan automated data collection, collaborative filtering, and asynchronous dissemination, eliminating the effort implied by explicit collaboration among peers. We instrumented two analytic applications and performed a mock analysis session to build a dataset and test the output of the system.

  13. Compensation Techniques in Accelerator Physics

    SciTech Connect

    Hisham Kamal Sayed

    2011-05-31

    Accelerator physics is one of the most diverse multidisciplinary fields of physics, wherein the dynamics of particle beams is studied. It takes more than the understanding of basic electromagnetic interactions to be able to predict the beam dynamics, and to be able to develop new techniques to produce, maintain, and deliver high quality beams for different applications. In this work, some basic theory regarding particle beam dynamics in accelerators will be presented. This basic theory, along with applying state of the art techniques in beam dynamics will be used in this dissertation to study and solve accelerator physics problems. Two problems involving compensation are studied in the context of the MEIC (Medium Energy Electron Ion Collider) project at Jefferson Laboratory. Several chromaticity (the energy dependence of the particle tune) compensation methods are evaluated numerically and deployed in a figure eight ring designed for the electrons in the collider. Furthermore, transverse coupling optics have been developed to compensate the coupling introduced by the spin rotators in the MEIC electron ring design.

  14. Craniospinal irradiation techniques

    SciTech Connect

    Scarlatescu, Ioana Avram, Calin N.; Virag, Vasile

    2015-12-07

    In this paper we present one treatment plan for irradiation cases which involve a complex technique with multiple beams, using the 3D conformational technique. As the main purpose of radiotherapy is to administrate a precise dose into the tumor volume and protect as much as possible all the healthy tissues around it, for a case diagnosed with a primitive neuro ectoderm tumor, we have developed a new treatment plan, by controlling one of the two adjacent fields used at spinal field, in a way that avoids the fields superposition. Therefore, the risk of overdose is reduced by eliminating the field divergence.

  15. The attribute measurement technique

    SciTech Connect

    Macarthur, Duncan W; Langner, Diana; Smith, Morag; Thron, Jonathan; Razinkov, Sergey; Livke, Alexander

    2010-01-01

    Any verification measurement performed on potentially classified nuclear material must satisfy two seemingly contradictory constraints. First and foremost, no classified information can be released. At the same time, the monitoring party must have confidence in the veracity of the measurement. An information barrier (IB) is included in the measurement system to protect the potentially classified information while allowing sufficient information transfer to occur for the monitoring party to gain confidence that the material being measured is consistent with the host's declarations, concerning that material. The attribute measurement technique incorporates an IB and addresses both concerns by measuring several attributes of the nuclear material and displaying unclassified results through green (indicating that the material does possess the specified attribute) and red (indicating that the material does not possess the specified attribute) lights. The attribute measurement technique has been implemented in the AVNG, an attribute measuring system described in other presentations at this conference. In this presentation, we will discuss four techniques used in the AVNG: (1) the 1B, (2) the attribute measurement technique, (3) the use of open and secure modes to increase confidence in the displayed results, and (4) the joint design as a method for addressing both host and monitor needs.

  16. Improved brazing technique

    DOEpatents

    Harast, D.G.

    1984-01-27

    A method of brazing comprises sand blasting the surfaces of the components to be brazed with particles of a brazing material to clean the surfaces and to embed brazing material in the surfaces, applying the brazing material to the surfaces, and heating the brazing material to form a brazement between the components.

  17. Tools and techniques for failure analysis and qualification of MEMS.

    SciTech Connect

    Walraven, Jeremy Allen

    2003-07-01

    Many of the tools and techniques used to evaluate and characterize ICs can be applied to MEMS technology. In this paper we discuss various tools and techniques used to provide structural, chemical, and electrical analysis and how these data aid in qualifying MEMS technologies.

  18. Soil Analysis using the semi-parametric NAA technique

    SciTech Connect

    Zamboni, C. B.; Silveira, M. A. G.; Medina, N. H.

    2007-10-26

    The semi-parametric Neutron Activation Analysis technique, using Au as a flux monitor, was applied to measure element concentrations of Br, Ca, Cl, K, Mn and Na for soil characterization. The results were compared with those using the Instrumental Neutron Activation Analysis technique and they found to be compatible. The viability, advantages, and limitations of using these two analytic methodologies are discussed.

  19. Patterns and perspectives in applied fracture mechanics

    SciTech Connect

    Merkle, J.G.

    1994-12-31

    This lecture begins with a overview of applied fracture mechanics pertinent to safety of pressure vessels. It then progresses to a chronological panorama of experimental and analytical results. To be useful and dependable in safety analysis of real structures, new analysis developments must be physically realistic, which means that they must accurately describe physical cause and effect. Consequently, before mathematical modeling can begin, cause and effect must be established from experimental data. This can be difficult and time consuming, but worth the effort. Accordingly, the theme of this paper is that the search for patterns is constant and vital. This theme is illustrated by the development of small, single-specimen, fracture toughness testing techniques. It is also illustrated by the development, based on two different published large-strain, elastic-plastic, three-dimensional finite-element analyses, of a hypothesis concerning three-dimensional loss of constraint. When a generalization of Irwin`s thickness-normalized plastic-zone parameter, reaches a value close to 2{pi}, the through-thickness contraction strain at the apex of the near-tip logarithmic-spiral slip-line region becomes the dominant negative strain accommodating crack opening. Because slip lines passing from the midplane to the stress-free side surfaces do not have to curve, once these slip lines are established, stresses near the crack tip are only elevated by strain hardening and constraint becomes significantly relaxed. This hypothesis, based on published three-dimensional elastic-plastic analyses, provides a potentially valuable means for gaining additional insight into constraint effects on fracture toughness by considering the roles played by the plastic strains as well as the stresses that develop near a crack tip.

  20. Applying for PMCDP/FPD Certification (initial)

    Energy.gov [DOE]

    Certification applicants are nominated by their respective Program Secretarial Office (PSO) to apply for FPD certification – candidates may not apply without program sponsorship. Each participating...

  1. Apply for Beam Time | Advanced Photon Source

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    All About Proposals Users Home Apply for Beam Time Deadlines Proposal Types Concepts, Definitions, and Help My APS Portal My APS Portal Apply for Beam Time Next Proposal Deadline...

  2. How to Apply for the ENERGY STAR®

    Energy.gov [DOE]

    Join us to learn about applying for ENERGY STAR Certification in Portfolio Manager. Understand the value of the ENERGY STAR certification, see the step-by-step process of applying, and gain tips to...

  3. Resin infiltration transfer technique

    DOEpatents

    Miller, David V.; Baranwal, Rita

    2009-12-08

    A process has been developed for fabricating composite structures using either reaction forming or polymer infiltration and pyrolysis techniques to densify the composite matrix. The matrix and reinforcement materials of choice can include, but are not limited to, silicon carbide (SiC) and zirconium carbide (ZrC). The novel process can be used to fabricate complex, net-shape or near-net shape, high-quality ceramic composites with a crack-free matrix.

  4. Image compression technique

    DOEpatents

    Fu, C.Y.; Petrich, L.I.

    1997-03-25

    An image is compressed by identifying edge pixels of the image; creating a filled edge array of pixels each of the pixels in the filled edge array which corresponds to an edge pixel having a value equal to the value of a pixel of the image array selected in response to the edge pixel, and each of the pixels in the filled edge array which does not correspond to an edge pixel having a value which is a weighted average of the values of surrounding pixels in the filled edge array which do correspond to edge pixels; and subtracting the filled edge array from the image array to create a difference array. The edge file and the difference array are then separately compressed and transmitted or stored. The original image is later reconstructed by creating a preliminary array in response to the received edge file, and adding the preliminary array to the received difference array. Filling is accomplished by solving Laplace`s equation using a multi-grid technique. Contour and difference file coding techniques also are described. The techniques can be used in a method for processing a plurality of images by selecting a respective compression approach for each image, compressing each of the images according to the compression approach selected, and transmitting each of the images as compressed, in correspondence with an indication of the approach selected for the image. 16 figs.

  5. Image compression technique

    DOEpatents

    Fu, Chi-Yung; Petrich, Loren I.

    1997-01-01

    An image is compressed by identifying edge pixels of the image; creating a filled edge array of pixels each of the pixels in the filled edge array which corresponds to an edge pixel having a value equal to the value of a pixel of the image array selected in response to the edge pixel, and each of the pixels in the filled edge array which does not correspond to an edge pixel having a value which is a weighted average of the values of surrounding pixels in the filled edge array which do correspond to edge pixels; and subtracting the filled edge array from the image array to create a difference array. The edge file and the difference array are then separately compressed and transmitted or stored. The original image is later reconstructed by creating a preliminary array in response to the received edge file, and adding the preliminary array to the received difference array. Filling is accomplished by solving Laplace's equation using a multi-grid technique. Contour and difference file coding techniques also are described. The techniques can be used in a method for processing a plurality of images by selecting a respective compression approach for each image, compressing each of the images according to the compression approach selected, and transmitting each of the images as compressed, in correspondence with an indication of the approach selected for the image.

  6. Electromagnetic Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Physical Properties See Electrical Techniques Electromagnetic techniques utilize EM induction processes to measure one or more electric or magnetic field components resulting...

  7. Electrical Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    fluid type and phase state of the pore water Thermal: Resistivity influenced by temperature Dictionary.png Electrical Techniques: Electrical techniques aim to image the...

  8. Apply to the Cyclotron Institute REU Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Apply Now Applying for the 2017 NSF-REU Nuclear Physics and Nuclear Chemistry Program at the Cyclotron Institute Eligibility: Applicants must be US citizens or have permanent resident status. Applicants must have undergraduate status at the time of the program. (Students planning to receive a degree by May 2017 are not eligible). Applicants must have completed an introductory physics/chemistry course and have completed or be enrolled in an advanced physics/chemistry course. To apply for the REU

  9. Applied Field Research Initiative Deep Vadose Zone

    Office of Environmental Management (EM)

    Applied Field Research Initiative Deep Vadose Zone Located on the Hanford Site in Richland, Washington, the Deep Vadose Zone Applied Field Research Initiative (DVZ AFRI) was established to protect water resources by addressing the challenge of preventing contamination in the deep vadose zone from reaching groundwater. Led by the Pacific Northwest National Laboratory, the Initiative is a collaborative effort that leverages Department of Energy (DOE) investments in basic science and applied

  10. Applied Energy Management | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Energy Management Jump to: navigation, search Name: Applied Energy Management Place: Huntersville, North Carolina Zip: 28078 Sector: Efficiency, Renewable Energy Product: North...

  11. Applied Quantum Technology AQT | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Quantum Technology AQT Jump to: navigation, search Name: Applied Quantum Technology (AQT) Place: Santa Clara, California Zip: 95054 Product: California-based manufacturer of CIGS...

  12. CRF Summer Undergraduate Internship Opportunities - Apply by...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Apply online and select Sandia as the host laboratory at: Undergraduate: http:science.energy.govwdtssuli Community College: http:science.energy.govwdtscci For further ...

  13. Vehicle Technologies Office: Applied Battery Research | Department...

    Office of Environmental Management (EM)

    Applied battery research addresses the barriers facing the lithium-ion systems that are closest to meeting the technical energy and power requirements for hybrid electric vehicle ...

  14. Applied Materials Inc AMAT | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    manufacturer of equipment used in solar (silicon, thin-film, BIPV), semiconductor, and LCD markets. References: Applied Materials Inc (AMAT)1 This article is a stub. You can...

  15. Nuclear Facilities and Applied Technologies at Sandia

    SciTech Connect

    Wheeler, Dave; Kaiser, Krista; Martin, Lonnie; Hanson, Don; Harms, Gary; Quirk, Tom

    2014-11-28

    The Nuclear Facilities and Applied Technologies organization at Sandia National Laboratories’ Technical Area Five (TA-V) is the leader in advancing nuclear technologies through applied radiation science and unique nuclear environments. This video describes the organization’s capabilities, facilities, and culture.

  16. Active Seismic Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Technique: Seismic Techniques Information Provided by Technique Lithology: Rock unit density influences elastic wave velocities. StratigraphicStructural: Structural geology-...

  17. Borehole Seismic Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Technique: Downhole Techniques Information Provided by Technique Lithology: Rock unit density influences elastic wave velocities StratigraphicStructural: Structural geology-...

  18. Blasting Rocks and Blasting Cars Applied Engineering

    SciTech Connect

    LBNL

    2008-07-02

    June 30, 2004 Berkeley Lab lecture: Deb Hopkins works with industries like automobile, mining and paper to improve their evaluation and measuring techniques. For several years, she has coordinated ... June 30, 2004 Berkeley Lab lecture: Deb Hopkins works with industries like automobile, mining and paper to improve their evaluation and measuring techniques. For several years, she has coordinated a program at Berkeley Lab funded under the Partnership for a New Generation of Vehicles, a collaboration between the federal government and the U.S. Council for Automotive Research. Nondestructive evaluation techniques to test a car's structural integrity are being developed for auto assembly lines.

  19. Blasting Rocks and Blasting Cars Applied Engineering

    ScienceCinema

    LBNL

    2016-07-12

    June 30, 2004 Berkeley Lab lecture: Deb Hopkins works with industries like automobile, mining and paper to improve their evaluation and measuring techniques. For several years, she has coordinated ... June 30, 2004 Berkeley Lab lecture: Deb Hopkins works with industries like automobile, mining and paper to improve their evaluation and measuring techniques. For several years, she has coordinated a program at Berkeley Lab funded under the Partnership for a New Generation of Vehicles, a collaboration between the federal government and the U.S. Council for Automotive Research. Nondestructive evaluation techniques to test a car's structural integrity are being developed for auto assembly lines.

  20. Survey of data compression techniques

    SciTech Connect

    Gryder, R.; Hake, K.

    1991-09-01

    PM-AIM must provide to customers in a timely fashion information about Army acquisitions. This paper discusses ways that PM-AIM can reduce the volume of data that must be transmitted between sites. Although this paper primarily discusses techniques of data compression, it also briefly discusses other options for meeting the PM-AIM requirements. The options available to PM-AIM, in addition to hardware and software data compression, include less-frequent updates, distribution of partial updates, distributed data base design, and intelligent network design. Any option that enhances the performance of the PM-AIM network is worthy of consideration. The recommendations of this paper apply to the PM-AIM project in three phases: the current phase, the target phase, and the objective phase. Each recommendation will be identified as (1) appropriate for the current phase, (2) considered for implementation during the target phase, or (3) a feature that should be part of the objective phase of PM-AIM's design. The current phase includes only those measures that can be taken with the installed leased lines. The target phase includes those measures that can be taken in transferring the traffic from the leased lines to the DSNET environment with minimal changes in the current design. The objective phase includes all the things that should be done as a matter of course. The objective phase for PM-AIM appears to be a distributed data base with data for each site stored locally and all sites having access to all data.

  1. Survey of data compression techniques

    SciTech Connect

    Gryder, R.; Hake, K.

    1991-09-01

    PM-AIM must provide to customers in a timely fashion information about Army acquisitions. This paper discusses ways that PM-AIM can reduce the volume of data that must be transmitted between sites. Although this paper primarily discusses techniques of data compression, it also briefly discusses other options for meeting the PM-AIM requirements. The options available to PM-AIM, in addition to hardware and software data compression, include less-frequent updates, distribution of partial updates, distributed data base design, and intelligent network design. Any option that enhances the performance of the PM-AIM network is worthy of consideration. The recommendations of this paper apply to the PM-AIM project in three phases: the current phase, the target phase, and the objective phase. Each recommendation will be identified as (1) appropriate for the current phase, (2) considered for implementation during the target phase, or (3) a feature that should be part of the objective phase of PM-AIM`s design. The current phase includes only those measures that can be taken with the installed leased lines. The target phase includes those measures that can be taken in transferring the traffic from the leased lines to the DSNET environment with minimal changes in the current design. The objective phase includes all the things that should be done as a matter of course. The objective phase for PM-AIM appears to be a distributed data base with data for each site stored locally and all sites having access to all data.

  2. Active load control techniques for wind turbines.

    SciTech Connect

    van Dam, C.P.; Berg, Dale E.; Johnson, Scott J.

    2008-07-01

    This report provides an overview on the current state of wind turbine control and introduces a number of active techniques that could be potentially used for control of wind turbine blades. The focus is on research regarding active flow control (AFC) as it applies to wind turbine performance and loads. The techniques and concepts described here are often described as 'smart structures' or 'smart rotor control'. This field is rapidly growing and there are numerous concepts currently being investigated around the world; some concepts already are focused on the wind energy industry and others are intended for use in other fields, but have the potential for wind turbine control. An AFC system can be broken into three categories: controls and sensors, actuators and devices, and the flow phenomena. This report focuses on the research involved with the actuators and devices and the generated flow phenomena caused by each device.

  3. Dose Reduction Techniques

    SciTech Connect

    WAGGONER, L.O.

    2000-05-16

    As radiation safety specialists, one of the things we are required to do is evaluate tools, equipment, materials and work practices and decide whether the use of these products or work practices will reduce radiation dose or risk to the environment. There is a tendency for many workers that work with radioactive material to accomplish radiological work the same way they have always done it rather than look for new technology or change their work practices. New technology is being developed all the time that can make radiological work easier and result in less radiation dose to the worker or reduce the possibility that contamination will be spread to the environment. As we discuss the various tools and techniques that reduce radiation dose, keep in mind that the radiological controls should be reasonable. We can not always get the dose to zero, so we must try to accomplish the work efficiently and cost-effectively. There are times we may have to accept there is only so much you can do. The goal is to do the smart things that protect the worker but do not hinder him while the task is being accomplished. In addition, we should not demand that large amounts of money be spent for equipment that has marginal value in order to save a few millirem. We have broken the handout into sections that should simplify the presentation. Time, distance, shielding, and source reduction are methods used to reduce dose and are covered in Part I on work execution. We then look at operational considerations, radiological design parameters, and discuss the characteristics of personnel who deal with ALARA. This handout should give you an overview of what it takes to have an effective dose reduction program.

  4. Applied Energy Programs, SPO-AE: LANL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Karl Jonietz 505-663-5539 Program Manager Melissa Fox 505-663-5538 Budget Analyst Fawn Gore 505-665-0224 The Applied Energy Program Office (SPO-AE) manages Los Alamos National...

  5. Apply to the Cyclotron Institute REU Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    an advanced physicschemistry course. To apply for the REU Program, complete the 3 steps below: Fill out the on-line 2016 Cyclotron Institute REU Application Note: You will be...

  6. Overview of the NMSEA applied research program

    SciTech Connect

    Stickney, B.; Wilson, A.

    1980-01-01

    Recently the NMSEA has seen the need to augment its other informational programs with a program of in-house applied research. The reasoning behind this move is presented here along with and accounting of past research activities.

  7. Pi in Applied Optics | GE Global Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The sPI Cam visits the Applied Optics Lab to see how Mark Meyers, a physicist and optical engineer at GE Global Research, uses Pi. You Might Also Like lightning bolt We One-Upped ...

  8. SAGE, Summer of Applied Geophysical Experience

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Apply Who Qualifies Special Undergrad Information Contributors Faculty Past Programs Photo Gallery NSEC » CSES » SAGE SAGE, the Summer of Applied Geophysical Experience A National Science Foundation Research Experiences for Undergraduates program Contacts Institute Director Reinhard Friedel-Los Alamos SAGE Co-Director W. Scott Baldridge-Los Alamos SAGE Co-Director Larry Braile-Purdue University Professional Staff Assistant Georgia Sanchez (505) 665-0855 Email SAGE Class of 2016 SAGE 2016

  9. How to Apply | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Postdoctoral Research Awards » How to Apply How to Apply Online Application Available at www.zintellect.com/Posting/Details/1997 Application deadline May 20, 2016. Familiarize yourself with the benefits, obligations, eligibility requirements, and evaluation criteria. Familiarize yourself with the requirements and obligations to determine whether your education and professional goals are well aligned with the EERE Postdoctoral Research Awards. Read the Evaluation Criteria that will be used to

  10. Peak fitting applied to low-resolution enrichment measurements

    SciTech Connect

    Bracken, D.; McKown, T.; Sprinkle, J.K. Jr.; Gunnink, R.; Kartoshov, M.; Kuropatwinski, J.; Raphina, G.; Sokolov, G.

    1998-12-01

    Materials accounting at bulk processing facilities that handle low enriched uranium consists primarily of weight and uranium enrichment measurements. Most low enriched uranium processing facilities draw separate materials balances for each enrichment handled at the facility. The enrichment measurement determines the isotopic abundance of the {sup 235}U, thereby determining the proper strata for the item, while the weight measurement generates the primary accounting value for the item. Enrichment measurements using the passive gamma radiation from uranium were developed for use in US facilities a few decades ago. In the US, the use of low-resolution detectors was favored because they cost less, are lighter and more robust, and don`t require the use of liquid nitrogen. When these techniques were exported to Europe, however, difficulties were encountered. Two of the possible root causes were discovered to be inaccurate knowledge of the container wall thickness and higher levels of minor isotopes of uranium introduced by the use of reactor returns in the enrichment plants. the minor isotopes cause an increase in the Compton continuum under the 185.7 keV assay peak and the observance of interfering 238.6 keV gamma rays. The solution selected to address these problems was to rely on the slower, more costly, high-resolution gamma ray detectors when the low-resolution method failed. Recently, these gamma ray based enrichment measurement techniques have been applied to Russian origin material. The presence of interfering gamma radiation from minor isotopes was confirmed. However, with the advent of fast portable computers, it is now possible to apply more sophisticated analysis techniques to the low-resolution data in the field. Explicit corrections for Compton background, gamma rays from {sup 236}U daughters, and the attenuation caused by thick containers can be part of the least squares fitting routine. Preliminary results from field measurements in Kazakhstan will be

  11. Categorical Exclusion Determinations: Advanced Technology Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Reequipping and Engineering CX(s) Applied: B1.31, B5.1 Date: 09062011 ... Aptera All-Electric and Hybrid Electric Vehicles CX(s) Applied: B1.31, B5.1 Date: 0620...

  12. Categorical Exclusion Determinations: Idaho Operations Office...

    Energy.gov [DOE] (indexed site)

    Stack Modifications for Sample Probe Replacement CX(s) Applied: B2.2 Date: 05112015 ... Determination Test Reactor Area-774 Substation Equipment Upgrades CX(s) Applied: B2.5 ...

  13. Rapid analysis of steels using laser-based techniques

    SciTech Connect

    Cremers, D.A.; Archuleta, F.L.; Dilworth, H.C.

    1985-01-01

    Based on the data obtained by this study, we conclude that laser-based techniques can be used to provide at least semi-quantitative information about the elemental composition of molten steel. Of the two techniques investigated here, the Sample-Only method appears preferable to the LIBS (laser-induced breakdown spectroscopy) method because of its superior analytical performance. In addition, the Sample-Only method would probably be easier to incorporate into a steel plant environment. However, before either technique can be applied to steel monitoring, additional research is needed.

  14. ADR LUNCHTIME PROGRAM: "Crisis Negotiation: Apply the Skills Used By Law

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Enforcement In Resolving Conflict Situations" | Department of Energy LUNCHTIME PROGRAM: "Crisis Negotiation: Apply the Skills Used By Law Enforcement In Resolving Conflict Situations" ADR LUNCHTIME PROGRAM: "Crisis Negotiation: Apply the Skills Used By Law Enforcement In Resolving Conflict Situations" Law enforcement, crisis/hostage negotiators, and other police personnel use highly effective communication and de-escalation techniques to help calm people in

  15. Downhole Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    in-situ within the well, downhole techniques are capable of accurately constraining these reservoir parameters relative to depth.2 Gaining an understanding of these reservoir...

  16. techniques | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    and discussion of smart grid technologies, tools, and techniques. The Smart Grid Investment Grant (SGIG) program is authorized by the Energy Independence and Security Act of...

  17. Method of applying coatings to substrates

    DOEpatents

    Hendricks, Charles D.

    1991-01-01

    A method for applying novel coatings to substrates is provided. The ends of multiplicity of rods of different materials are melted by focused beams of laser light. Individual electric fields are applied to each of the molten rod ends, thereby ejecting charged particles that include droplets, atomic clusters, molecules, and atoms. The charged particles are separately transported, by the accelerations provided by electric potentials produced by an electrode structure, to substrates where they combine and form the coatings. Layered and thickness graded coatings comprised of hithereto unavailable compositions, are provided.

  18. CX-009186: Categorical Exclusion Determination

    Energy.gov [DOE]

    (0675-1570) Washington University in St. Louis - Optimal Operation and Management of Energy Storage Systems Based on Real-Time Predictive Modeling and Adaptive Battery Management Techniques CX(s) Applied: B3.6 Date: 09/07/2012 Location(s): Missouri, Colorado Offices(s): Advanced Research Projects Agency-Energy

  19. CX-100019: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Determination of Rare Earths in Geothermal Brines and Evaluation of Potential Extraction Techniques CX(s) Applied: A9, B3.1, B3.6 Date: 08/18/2014 Location(s): California Offices(s): Golden Field Office Technology Office: Geothermal Technologies Award Number: DE-EE0006750

  20. CX-010189: Categorical Exclusion Determination

    Energy.gov [DOE]

    Treatment and Beneficial Reuse of Produced Waters Using a Novel Pervaporation-Based Irrigation Technique CX(s) Applied: A9, A11, B3.6 Date: 04/16/2013 Location(s): Wyoming Offices(s): National Energy Technology Laboratory

  1. Uniform insulation applied-B ion diode

    DOEpatents

    Seidel, David B.; Slutz, Stephen A.

    1988-01-01

    An applied-B field extraction ion diode has uniform insulation over an anode surface for increased efficiency. When the uniform insulation is accomplished with anode coils, and a charge-exchange foil is properly placed, the ions may be focused at a point on the z axis.

  2. How to Apply for Senior Executive positions

    Energy.gov [DOE]

    To apply vacancies for SENIOR EXECUTIVE SERVICE (SES) , SENIOR LEVEL (SL), SCIENTIFIC AND PROFESSIONAL (ST) positions within the Department of Energy please visit OPM's website: http://www.usajobs.gov. From this site, you may download announcements for vacancies of interest to you.

  3. (Applied mass spectrometry in the health sciences)

    SciTech Connect

    Glish, G.L.

    1990-05-03

    The traveler attended the 2nd International Symposium on Applied Mass Spectrometry in the Health Sciences and presented and invited paper. Papers presented that were of interest to ORNL mass spectrometry programs involved ionization of large molecules by electrospray and laser desorption. Other papers of interest included applications of MS/MS for structural elucidation and new instrumentation.

  4. Development of Improved Oil Field Waste Injection Disposal Techniques

    SciTech Connect

    Terralog Technologies

    2002-11-25

    The goals of this project have was to: (1) assemble and analyze a comprehensive database of past waste injection operations; (2) develop improved diagnostic techniques for monitoring fracture growth and formation changes; (3) develop operating guidelines to optimize daily operations and ultimate storage capacity of the target formation; and (4) to apply these improved models and guidelines in the field.

  5. Formation Testing Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Testing Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Formation Testing Techniques Details Activities (0) Areas (0) Regions (0)...

  6. Form:ExplorationTechnique | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Exploration Technique below. If the technique already exists, you will be able to edit its information. AddEdit Technique Retrieved from "http:en.openei.orgw...

  7. Applied Mathematics Conferences and Workshops | U.S. DOE Office...

    Office of Science (SC)

    ASCR Home About Research Applied Mathematics Applied Mathematics Conferences And Workshops Computer Science Next Generation Networking Scientific Discovery through Advanced ...

  8. Summer of Applied Geophysical Experience Reading List

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Geophysical Experience Reading List Summer of Applied Geophysical Experience Reading List A National Science Foundation Research Experiences for Undergraduates program Contacts Institute Director Reinhard Friedel-Los Alamos SAGE Co-Director W. Scott Baldridge-Los Alamos SAGE Co-Director Larry Braile-Purdue University Professional Staff Assistant Georgia Sanchez (505) 665-0855 Keller, R., Khan, M. A., Morgan, P., et al., 1991, A Comparative Study of the Rio Grande and Kenya rifts, Tectonophys.,

  9. PFT Air Infiltration Measurement Technique

    Energy.gov [DOE]

    The airtightness of a building can be determined by using several methods. Learn how the PFT (PerFluorocarbon tracer gas) technique provides information about air leakage and energy loss.

  10. Capacitance Techniques | Photovoltaic Research | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Capacitance Techniques Capacitance techniques monitor the movement of electronic charge within a semiconductor device and provide a measure of free-carrier and electrically active defect-state properties. Capacitance is the charge storage capacity and is measured across a rectifying junction. PV Research Other Measurements pages: Device Performance Analytical Microscopy & Imaging Science Interfacial & Surface Science Materials Science Chemistry & Nanoscience National Center for

  11. Infrared tag and track technique

    DOEpatents

    Partin, Judy K.; Stone, Mark L.; Slater, John; Davidson, James R.

    2007-12-04

    A method of covertly tagging an object for later tracking includes providing a material capable of at least one of being applied to the object and being included in the object, which material includes deuterium; and performing at least one of applying the material to the object and including the material in the object in a manner in which in the appearance of the object is not changed, to the naked eye.

  12. Applying Lessons from SN Studies to GRBs

    SciTech Connect

    Fryer, Chris L.

    2009-05-25

    Supernovae and Gamma-Ray bursts display many similarities, both in their observational qualities and in the engines behind these powerful explosions. Although not identical, there is a strong synergy in the study of these two objects. There is much the gamma-ray burst field can learn from the lessons of the more-developed supernova field, but the supernova field can also learn from new techniques developed for gamma-ray burst studies. Here I review some of the 'lessons learned' from these fields to help foster this synergy.

  13. Category:Magnetotelluric Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Magnetotelluric Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermalpower.jpg Looking for the Magnetotelluric Techniques page? For detailed...

  14. Techniques for multiboson interferometry (Journal Article) |...

    Office of Scientific and Technical Information (OSTI)

    Techniques for multiboson interferometry Citation Details In-Document Search Title: Techniques for multiboson interferometry Authors: Gangadharan, Dhevan Publication Date: ...

  15. Apply for a Job | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    FAQs Answers to frequently asked questions about applying for a job at Argonne A Note About Privacy We do not ask you for personally identifiable information such as birthdate, social security number, or driver's license number. To ensure your privacy, please do not include such information in the documents that you upload to the system. A Note About File Size Our application system has a file size limit of 820KB. While this is sufficient for the vast majority of documents, we have found that

  16. Review of uranium bioassay techniques

    SciTech Connect

    Bogard, J.S.

    1996-04-01

    A variety of analytical techniques is available for evaluating uranium in excreta and tissues at levels appropriate for occupational exposure control and evaluation. A few (fluorometry, kinetic phosphorescence analysis, {alpha}-particle spectrometry, neutron irradiation techniques, and inductively-coupled plasma mass spectrometry) have also been demonstrated as capable of determining uranium in these materials at levels comparable to those which occur naturally. Sample preparation requirements and isotopic sensitivities vary widely among these techniques and should be considered carefully when choosing a method. This report discusses analytical techniques used for evaluating uranium in biological matrices (primarily urine) and limits of detection reported in the literature. No cost comparison is attempted, although references are cited which address cost. Techniques discussed include: {alpha}-particle spectrometry; liquid scintillation spectrometry, fluorometry, phosphorometry, neutron activation analysis, fission-track counting, UV-visible absorption spectrophotometry, resonance ionization mass spectrometry, and inductively-coupled plasma mass spectrometry. A summary table of reported limits of detection and of the more important experimental conditions associated with these reported limits is also provided.

  17. Authentication techniques for smart cards

    SciTech Connect

    Nelson, R.A.

    1994-02-01

    Smart card systems are most cost efficient when implemented as a distributed system, which is a system without central host interaction or a local database of card numbers for verifying transaction approval. A distributed system, as such, presents special card and user authentication problems. Fortunately, smart cards offer processing capabilities that provide solutions to authentication problems, provided the system is designed with proper data integrity measures. Smart card systems maintain data integrity through a security design that controls data sources and limits data changes. A good security design is usually a result of a system analysis that provides a thorough understanding of the application needs. Once designers understand the application, they may specify authentication techniques that mitigate the risk of system compromise or failure. Current authentication techniques include cryptography, passwords, challenge/response protocols, and biometrics. The security design includes these techniques to help prevent counterfeit cards, unauthorized use, or information compromise. This paper discusses card authentication and user identity techniques that enhance security for microprocessor card systems. It also describes the analysis process used for determining proper authentication techniques for a system.

  18. Lightweight and Statistical Techniques for Petascale PetaScale Debugging

    SciTech Connect

    Miller, Barton

    2014-06-30

    This project investigated novel techniques for debugging scientific applications on petascale architectures. In particular, we developed lightweight tools that narrow the problem space when bugs are encountered. We also developed techniques that either limit the number of tasks and the code regions to which a developer must apply a traditional debugger or that apply statistical techniques to provide direct suggestions of the location and type of error. We extend previous work on the Stack Trace Analysis Tool (STAT), that has already demonstrated scalability to over one hundred thousand MPI tasks. We also extended statistical techniques developed to isolate programming errors in widely used sequential or threaded applications in the Cooperative Bug Isolation (CBI) project to large scale parallel applications. Overall, our research substantially improved productivity on petascale platforms through a tool set for debugging that complements existing commercial tools. Previously, Office Of Science application developers relied either on primitive manual debugging techniques based on printf or they use tools, such as TotalView, that do not scale beyond a few thousand processors. However, bugs often arise at scale and substantial effort and computation cycles are wasted in either reproducing the problem in a smaller run that can be analyzed with the traditional tools or in repeated runs at scale that use the primitive techniques. New techniques that work at scale and automate the process of identifying the root cause of errors were needed. These techniques significantly reduced the time spent debugging petascale applications, thus leading to a greater overall amount of time for application scientists to pursue the scientific objectives for which the systems are purchased. We developed a new paradigm for debugging at scale: techniques that reduced the debugging scenario to a scale suitable for traditional debuggers, e.g., by narrowing the search for the root-cause analysis

  19. FY 1990 Applied Sciences Branch annual report

    SciTech Connect

    Keyes, B.M.; Dippo, P.C.

    1991-11-01

    The Applied Sciences Branch actively supports the advancement of DOE/SERI goals for the development and implementation of the solar photovoltaic technology. The primary focus of the laboratories is to provide state-of-the-art analytical capabilities for materials and device characterization and fabrication. The branch houses a comprehensive facility which is capable of providing information on the full range of photovoltaic components. A major objective of the branch is to aggressively pursue collaborative research with other government laboratories, universities, and industrial firms for the advancement of photovoltaic technologies. Members of the branch disseminate research findings to the technical community in publications and presentations. This report contains information on surface and interface analysis, materials characterization, development, electro-optical characterization module testing and performance, surface interactions and FTIR spectroscopy.

  20. Multi-scale Shock Technique

    Energy Science and Technology Software Center

    2009-08-01

    The code to be released is a new addition to the LAMMPS molecular dynamics code. LAMMPS is developed and maintained by Sandia, is publicly available, and is used widely by both natioanl laboratories and academics. The new addition to be released enables LAMMPS to perform molecular dynamics simulations of shock waves using the Multi-scale Shock Simulation Technique (MSST) which we have developed and has been previously published. This technique enables molecular dynamics simulations of shockmore » waves in materials for orders of magnitude longer timescales than the direct, commonly employed approach.« less

  1. Applying process-control techniques to a research environment: on-line controls and instrumentation for Doublet III fusion project

    SciTech Connect

    Drobnis, D. D.

    1983-09-01

    The system design is given in terms of the following: (1) conventional aspects, (2) architecture, (3) electronic interfaces, (4) operator interfaces, (5) unconventional aspects, (6) electrical energy, (7) electrical noise, (8) operating flexibility, and (9) command procedure development. (MOW)

  2. New Techniques for Particle Acclerators

    SciTech Connect

    Sessler, Andrew M.

    1990-06-01

    A review is presented of the new techniques which have been proposed for use in particle accelerators. Attention is focused upon those areas where significant progress has been made in the last two years--in particular, upon two-beam accelerators, wakefield accelerators, and plasma focusers.

  3. Iterative electromagnetic Born inversion applied to earth conductivity imaging

    SciTech Connect

    Alumbaugh, D.L.

    1993-08-01

    This thesis investigates the use of a fast imaging technique to deduce the spatial conductivity distribution in the earth from low frequency (< 1 MHz), cross well electromagnetic (EM) measurements. The theory embodied in this work is the extension of previous strategies and is based on the Born series approximation to solve both the forward and inverse problem. Nonlinear integral equations are employed to derive the series expansion which accounts for the scattered magnetic fields that are generated by inhomogeneities embedded in either a homogenous or a layered earth. A sinusoidally oscillating, vertically oriented magnetic dipole is employed as a source, and it is assumed that the scattering bodies are azimuthally symmetric about the source dipole axis. The use of this model geometry reduces the 3-D vector problem to a more manageable 2-D scalar form. The validity of the cross well EM method is tested by applying the imaging scheme to two sets of field data. Images of the data collected at the Devine, Texas test site show excellent correlation with the well logs. Unfortunately there is a drift error present in the data that limits the accuracy of the results. A more complete set of data collected at the Richmond field station in Richmond, California demonstrates that cross well EM can be successfully employed to monitor the position of an injected mass of salt water. Both the data and the resulting images clearly indicate the plume migrates toward the north-northwest. The plausibility of these conclusions is verified by applying the imaging code to synthetic data generated by a 3-D sheet model.

  4. Energy Department Extends Deadline to Apply for START Tribal...

    Energy Saver

    Extends Deadline to Apply for START Tribal Renewable Energy Project Development Assistance to May 22, 2015 Energy Department Extends Deadline to Apply for START Tribal Renewable...

  5. ADR LUNCHTIME PROGRAM: "Crisis Negotiation: Apply the Skills...

    Office of Environmental Management (EM)

    Apply the Skills Used By Law Enforcement In Resolving Conflict Situations" ADR LUNCHTIME PROGRAM: "Crisis Negotiation: Apply the Skills Used By Law Enforcement In Resolving ...

  6. An exact general remeshing scheme applied to physically conservative...

    Office of Scientific and Technical Information (OSTI)

    Published Article: An exact general remeshing scheme applied to physically conservative voxelization Title: An exact general remeshing scheme applied to physically conservative ...

  7. Identifying a cooperative control mechanism between an applied...

    Office of Scientific and Technical Information (OSTI)

    Identifying a cooperative control mechanism between an applied field and the environment ... Title: Identifying a cooperative control mechanism between an applied field and the ...

  8. Large Eddy Simulation (LES) Applied to Advanced Engine Combustion...

    Energy.gov [DOE] (indexed site)

    Large Eddy Simulation (LES) Applied to Advanced Engine Combustion Research Large Eddy Simulation (LES) Applied to Low-Temperature and Diesel Engine Combustion Research Vehicle ...

  9. James Webb Space Telescope: PM Lessons Applied - Eric Smith,...

    Energy Saver

    James Webb Space Telescope: PM Lessons Applied - Eric Smith, Deputy Program Director, NASA James Webb Space Telescope: PM Lessons Applied - Eric Smith, Deputy Program Director,...

  10. Building America Webinar: Opportunities to Apply Phase Change...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    to Apply Phase Change Materials to Building Enclosures Building America Webinar: Opportunities to Apply Phase Change Materials to Building Enclosures This webinar, presented by ...

  11. Applying physics, teamwork to fusion energy science | Princeton...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Applying physics, teamwork to fusion energy science American Fusion News Category: Massachusetts Institute of Technology (MIT) Link: Applying physics, teamwork to fusion energy science

  12. EVMS Training Snippet: 6.2 Applied Predictive Analysis | Department...

    Office of Environmental Management (EM)

    2 Applied Predictive Analysis EVMS Training Snippet: 6.2 Applied Predictive Analysis This EVMS Training Snippet, sponsored by the Office of Project Management (PM) provides ...

  13. Statistical and Domain Analytics Applied to PV Module Lifetime...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science ...

  14. Revealing the Impact of Climate Variability on the Wind Resource Using Data Mining Techniques (Poster)

    SciTech Connect

    Clifton, A.; Lundquist, J.

    2011-12-01

    A data mining technique called 'k-means clustering' can be used to group winds at the NWTC into 4 major clusters. The frequency of some winds in the clusters is correlated with regional pressure gradients and climate indices. The technique could also be applied to wind resource assessment and selecting scenarios for flow modeling.

  15. Artificial intelligence technologies applied to terrain analysis

    SciTech Connect

    Wright, J.C. ); Powell, D.R. )

    1990-01-01

    The US Army Training and Doctrine Command is currently developing, in cooperation with Los Alamos National Laboratory, a Corps level combat simulation to support military analytical studies. This model emphasizes high resolution modeling of the command and control processes, with particular attention to architectural considerations that enable extension of the model. A planned future extension is the inclusion of an computer based planning capability for command echelons that can be dynamical invoked during the execution of then model. Command and control is the process through which the activities of military forces are directed, coordinated, and controlled to achieve the stated mission. To perform command and control the commander must understand the mission, perform terrain analysis, understand his own situation and capabilities as well as the enemy situation and his probable actions. To support computer based planning, data structures must be available to support the computer's ability to understand'' the mission, terrain, own capabilities, and enemy situation. The availability of digitized terrain makes it feasible to apply artificial intelligence technologies to emulate the terrain analysis process, producing data structures for uses in planning. The work derived thus for to support the understanding of terrain is the topic of this paper. 13 refs., 5 figs., 6 tabs.

  16. Image processing applied to laser cladding process

    SciTech Connect

    Meriaudeau, F.; Truchetet, F.

    1996-12-31

    The laser cladding process, which consists of adding a melt powder to a substrate in order to improve or change the behavior of the material against corrosion, fatigue and so on, involves a lot of parameters. In order to perform good tracks some parameters need to be controlled during the process. The authors present here a low cost performance system using two CCD matrix cameras. One camera provides surface temperature measurements while the other gives information relative to the powder distribution or geometric characteristics of the tracks. The surface temperature (thanks to Beer Lambert`s law) enables one to detect variations in the mass feed rate. Using such a system the authors are able to detect fluctuation of 2 to 3g/min in the mass flow rate. The other camera gives them information related to the powder distribution, a simple algorithm applied to the data acquired from the CCD matrix camera allows them to see very weak fluctuations within both gaz flux (carriage or protection gaz). During the process, this camera is also used to perform geometric measurements. The height and the width of the track are obtained in real time and enable the operator to find information related to the process parameters such as the speed processing, the mass flow rate. The authors display the result provided by their system in order to enhance the efficiency of the laser cladding process. The conclusion is dedicated to a summary of the presented works and the expectations for the future.

  17. Hanford Waste Vitrification Plant applied technology plan

    SciTech Connect

    Kruger, O.L.

    1990-09-01

    This Applied Technology Plan describes the process development, verification testing, equipment adaptation, and waste form qualification technical issues and plans for resolution to support the design, permitting, and operation of the Hanford Waste Vitrification Plant. The scope of this Plan includes work to be performed by the research and development contractor, Pacific Northwest Laboratory, other organizations within Westinghouse Hanford Company, universities and companies with glass technology expertise, and other US Department of Energy sites. All work described in this Plan is funded by the Hanford Waste Vitrification Plant Project and the relationship of this Plan to other waste management documents and issues is provided for background information. Work to performed under this Plan is divided into major areas that establish a reference process, develop an acceptable glass composition envelope, and demonstrate feed processing and glass production for the range of Hanford Waste Vitrification Plant feeds. Included in this work is the evaluation and verification testing of equipment and technology obtained from the Defense Waste Processing Facility, the West Valley Demonstration Project, foreign countries, and the Hanford Site. Development and verification of product and process models and other data needed for waste form qualification documentation are also included in this Plan. 21 refs., 4 figs., 33 tabs.

  18. Data mining and visualization techniques

    DOEpatents

    Wong, Pak Chung; Whitney, Paul; Thomas, Jim

    2004-03-23

    Disclosed are association rule identification and visualization methods, systems, and apparatus. An association rule in data mining is an implication of the form X.fwdarw.Y where X is a set of antecedent items and Y is the consequent item. A unique visualization technique that provides multiple antecedent, consequent, confidence, and support information is disclosed to facilitate better presentation of large quantities of complex association rules.

  19. Category:Downhole Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Downhole Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermalpower.jpg Looking for the Downhole Techniques page? For detailed information on Downhole...

  20. Category:Seismic Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Seismic Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermalpower.jpg Looking for the Seismic Techniques page? For detailed information on Seismic...

  1. Category:Geophysical Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Geophysical Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermalpower.jpg Looking for the Geophysical Techniques page? For detailed information on...

  2. Category:Drilling Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Drilling Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermalpower.jpg Looking for the Drilling Techniques page? For detailed information on Drilling...

  3. Category:Magnetic Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Magnetic Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermalpower.jpg Looking for the Magnetic Techniques page? For detailed information on Magnetic...

  4. Hyperspectral Remote Sensing Techniques For Locating Geothermal...

    OpenEI (Open Energy Information) [EERE & EIA]

    Remote Sensing Techniques For Locating Geothermal Resources Jump to: navigation, search OpenEI Reference LibraryAdd to library Poster: Hyperspectral Remote Sensing Techniques For...

  5. Uncertainty Analysis Technique for OMEGA Dante Measurements ...

    Office of Scientific and Technical Information (OSTI)

    Uncertainty Analysis Technique for OMEGA Dante Measurements Citation Details In-Document Search Title: Uncertainty Analysis Technique for OMEGA Dante Measurements You are...

  6. Category:Electrical Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Resistivity Survey E Electrical Techniques Electromagnetic Techniques R Radiometrics S Self Potential T Telluric Survey Retrieved from "http:en.openei.orgw...

  7. Techniques for multiboson interferometry (Journal Article) |...

    Office of Scientific and Technical Information (OSTI)

    Techniques for multiboson interferometry Title: Techniques for multiboson interferometry Authors: Gangadharan, Dhevan Publication Date: 2015-07-08 OSTI Identifier: 1198623 Grant...

  8. Category:Geochemical Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Techniques Technique Subcategories This category has only the following subcategory. G + Geochemical Data Analysis (2 categories) 4 pages Pages in category "Geochemical...

  9. Innovative Exploration Techniques for Geothermal Assessment at...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Techniques for Geothermal Assessment at Jemez Pueblo, New Mexico Innovative Exploration Techniques for Geothermal Assessment at Jemez Pueblo, New Mexico Innovative Exploration ...

  10. Centrifuge Techniques and Apparatus for Transport Experiments in Porous Media

    SciTech Connect

    Earl D. Mattson; Carl D. Paler; Robert W. Smith; Markus Flury

    2010-06-01

    This paper describes experimental approaches and apparatus that we have developed to study solute and colloid transport in porous media using Idaho National Laboratory's 2-m radius centrifuge. The ex-perimental techniques include water flux scaling with applied acceleration at the top of the column and sub-atmospheric pressure control at the column base, automation of data collection, and remote experimental con-trol over the internet. These apparatus include a constant displacement piston pump, a custom designed liquid fraction collector based on switching valve technology, and modified moisture monitoring equipment. Suc-cessful development of these experimental techniques and equipment is illustrated through application to transport of a conservative tracer through unsaturated sand column, with centrifugal acceleration up to 40 gs. Development of such experimental equipment that can withstand high accelerations enhances the centrifuge technique to conduct highly controlled unsaturated solute/colloid transport experiments and allows in-flight liquid sample collection of the effluent.

  11. A satellite remote sensing technique for geological structure horizon mapping

    SciTech Connect

    Fraser, A.; Huggins, P.; Rees, J.

    1996-08-01

    A Satellite Remote Sensing Technique is demonstrated for generating near surface geological structure data. This technique enables the screening of large areas and targeting of seismic acquisition during hydrocarbon exploration. This is of particular advantage in terrains where surveying is logistically difficult. Landsat Thematic Mapper (TM) data and a high resolution Digital Elevation Model (DEM), are used to identify and map outcropping horizons. These are used to reconstruct the near surface structure. The technique is applied in Central Yemen which is characterised by a {open_quote}layer-cake{close_quote} geological and low dipping terrain. The results are validated using 2D seismic data. The near surface map images faults and structure not apparent in the raw data. Comparison with the structure map generated from a 2D seismic data indicates very good structural and fault correlation. The near surface map successfully highlights areas of potential closure at reservoir depths.

  12. New techniques in 3D scalar and vector field visualization

    SciTech Connect

    Max, N.; Crawfis, R.; Becker, B.

    1993-05-05

    At Lawrence Livermore National Laboratory (LLNL) we have recently developed several techniques for volume visualization of scalar and vector fields, all of which use back-to-front compositing. The first renders volume density clouds by compositing polyhedral volume cells or their faces. The second is a ``splatting`` scheme which composites textures used to reconstruct the scalar or vector fields. One version calculates the necessary texture values in software, and another takes advantage of hardware texture mapping. The next technique renders contour surface polygons using semi-transparent textures, which adjust appropriately when the surfaces deform in a flow, or change topology. The final one renders the ``flow volume`` of smoke or dye tracer swept out by a fluid flowing through a small generating polygon. All of these techniques are applied to a climate model data set, to visualize cloud density and wind velocity.

  13. Retrospective dosimetry using EPR and TL techniques: a status report

    SciTech Connect

    Haskell, E.H.

    1996-12-31

    Methods of retrospective dosimetry, including luminescence and electron paramagnetic resonance spectroscopy (EPR), rely on measurement of accident dose absorbed by naturally occurring materials - ceramics in the case of both thermoluminescence (TL) and optically stimulated luminescence (OSL) and organic materials and bio- minerals in the case of EPR. Each of these methods relies on measurement of radiation defects resulting from accidental exposure. Since defects also result from natural sources of radiation over the lifetime of a sample, analysis is usually restricted to materials for which the natural dose may be determined and subtracted from the measured cumulative dose. Luminescence dating techniques rely heavily on an accurate assessment of cumulative dose from natural radiation sources, and dating research has provided us with the bulk of our knowledge in this area. Virtually all of the work on natural dose determination can be directly applied to retrospective techniques. With EPR techniques the cumulative dose from diagnostic x- rays is also of importance.

  14. Microcurrent therapeutic technique for treatment of radiation toxicity

    DOEpatents

    Lennox, Arlene; Funder, Sandra

    2000-01-01

    The present technique provides a method of remediating the toxicities associated with radiation therapy. A conductive gel is applied to the affected bodily area. A sinusoidally pulsed biphasic DC current is then applied to the affected bodily area using at least one electrode. The electrode is manipulated using active tactile manipulation by for a predetermined time and the frequency of the sinusoidally pulsed biphasic DC current is decreased during the course of the treatment. The method also includes applying a spiked pulsed biphasic DC current to the affected bodily area using at least one electrode. This electrode is also manipulated using active tactile manipulation by for a predetermined time and the frequency of the spiked pulsed biphasic DC current is also decreased during the course of the treatment.

  15. Pigments with or without organic binder? A survey of wall painting techniques during Antiquity

    SciTech Connect

    Walter, P.

    1996-01-01

    The identification of ancient artistic techniques is based on laboratory studies and, for historical cases, also on literary sources. An analytical approach using the techniques of physical chemistry reveals the technical expertise of the artists, right at the dawn of art. In the case of prehistoric parietal art, we show that the artists prepared their pigments with different ground and mixed minerals. They applied their material onto the wall and the particles remained embedded in the superficial calcite layer. Later, the prehistoric people prepared a real paint with the proper pigment, an extender and an organic binder to fix the paint on the wall. During Antiquity, new techniques appear. The paint is applied to the natural or artificial wall and is executed, either directly or on a previously applied plaster. The aim of this paper is to describe the evolution of the techniques. The underlying chemistry provides some interesting clues on the technical choices. {copyright} {ital 1996 American Institute of Physics.}

  16. Techniques for Automated Performance Analysis

    SciTech Connect

    Marcus, Ryan C.

    2014-09-02

    The performance of a particular HPC code depends on a multitude of variables, including compiler selection, optimization flags, OpenMP pool size, file system load, memory usage, MPI configuration, etc. As a result of this complexity, current predictive models have limited applicability, especially at scale. We present a formulation of scientific codes, nodes, and clusters that reduces complex performance analysis to well-known mathematical techniques. Building accurate predictive models and enhancing our understanding of scientific codes at scale is an important step towards exascale computing.

  17. CX-002287: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    287: Categorical Exclusion Determination CX-002287: Categorical Exclusion Determination Investigation of Micro and Macro-Scale Transport Processes for Improved Fuel Cell Performance CX(s) Applied: B3.6 Date: 05/13/2010 Location(s): Michigan Office(s): Energy Efficiency and Renewable Energy, Golden Field Office General Motors proposes to use federal funds to investigate and synthesize application of new fuel cell measurement techniques. These techniques will include transport phenomena at the

  18. Photonic Doppler Velocimetry Multiplexing Techniques: Evaluation of Photonic Techniques

    SciTech Connect

    Edward Daykin

    2012-05-24

    This poster reports progress related to photonic technologies. Specifically, the authors developed diagnostic system architecture for a Multiplexed Photonic Doppler Velocimetry (MPDV) that incorporates frequency and time-division multiplexing into existing PDV methodology to provide increased channel count. Current MPDV design increases number of data records per digitizer channel 8x, and also operates as a laser-safe (Class 3a) system. Further, they applied heterodyne interferometry to allow for direction-of-travel determination and enable high-velocity measurements (>10 km/s) via optical downshifting. They also leveraged commercially available, inexpensive and robust components originally developed for telecom applications. Proposed MPDV architectures employ only commercially available, fiber-coupled hardware.

  19. Hanford Site Workers Apply Fixative to Lock Down Facility's Contamination

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Workers Apply Fixative to Lock Down Facility's Contamination Hanford Site Workers Apply Fixative to Lock Down Facility's Contamination August 31, 2016 - 12:30pm Addthis Hanford Site Workers Apply Fixative to Lock Down Facility’s Contamination Hanford Site Workers Apply Fixative to Lock Down Facility’s Contamination Hanford Site Workers Apply Fixative to Lock Down Facility’s Contamination Hanford Site Workers Apply Fixative to Lock Down Facility's

  20. Repositioning of Covered Stents: The Grip Technique

    SciTech Connect

    Kirby, John Martin; Guo Xiaofeng; Midia, Mehran

    2011-06-15

    Introduction: Retrieval and repositioning of a stent deployed beyond its intended target region may be a difficult technical challenge. Materials and Methods: A balloon-mounted snare technique, a variant of the coaxial loop snare technique, is described. Results: The technique is described for the repositioning of a covered transjugular intrahepatic portosystemic shunt stent and a covered biliary stent. Conclusion: The balloon-mounted snare technique is a useful technique for retrieval of migrated stents.

  1. Geobotanical Remote Sensing Applied to Targeting New Geothermal...

    Office of Scientific and Technical Information (OSTI)

    We have now entered the phase where the remote sensing techniques and tools we are developing are mature enough to be combined with other geothermal exploration techniques such as ...

  2. Subranging technique using superconducting technology

    DOEpatents

    Gupta, Deepnarayan

    2003-01-01

    Subranging techniques using "digital SQUIDs" are used to design systems with large dynamic range, high resolution and large bandwidth. Analog-to-digital converters (ADCs) embodying the invention include a first SQUID based "coarse" resolution circuit and a second SQUID based "fine" resolution circuit to convert an analog input signal into "coarse" and "fine" digital signals for subsequent processing. In one embodiment, an ADC includes circuitry for supplying an analog input signal to an input coil having at least a first inductive section and a second inductive section. A first superconducting quantum interference device (SQUID) is coupled to the first inductive section and a second SQUID is coupled to the second inductive section. The first SQUID is designed to produce "coarse" (large amplitude, low resolution) output signals and the second SQUID is designed to produce "fine" (low amplitude, high resolution) output signals in response to the analog input signals.

  3. Kerry Vahala: Jenkins Professor and Professor of Applied Physics...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Applied Physics, California Institute of Technology Nov 6, 2013 | 4:00 PM - 5:00 PM Kerry Vahala Jenkins Professor and Professor of Applied Physics, California Institute of ...

  4. DOE - Office of Legacy Management -- Case School of Applied Science...

    Office of Legacy Management (LM)

    Case School of Applied Science Ohio State University - OH 0-01 Site ID (CSD Index Number): OH.0-01 Site Name: Case School of Applied Science, Ohio State University Site Summary: Site ...

  5. Oregon Learning About and Applying for Water Rights Webpage ...

    OpenEI (Open Energy Information) [EERE & EIA]

    Learning About and Applying for Water Rights Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Oregon Learning About and Applying for Water...

  6. Aachen University of Applied Sciences | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Aachen University of Applied Sciences Place: Germany Sector: Services Product: General Financial & Legal Services ( Academic Research foundation ) References: Aachen...

  7. Applied Process Engineering Laborotory APEL | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Engineering Laborotory (APEL) Place: United States Sector: Services Product: General Financial & Legal Services ( Private family-controlled ) References: Applied Process...

  8. Attenuation-Based Remedies in the Subsurface Applied Field Research

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Initiative (ABRS AFRI) | Department of Energy Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) Located at the Savannah River Site in Aiken, South Carolina, the Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) was established to

  9. Register to Apply for EERE Funding Opportunities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Apply for Funding » Register to Apply for EERE Funding Opportunities Register to Apply for EERE Funding Opportunities Before applying to an EERE financial opportunity, potential applicants must complete specific registration requirements. Of the registrations listed below, the EERE Exchange registration does not have a delay; however, the remaining registration requirements could take several weeks to process and are necessary before a potential applicant can receive an award. To be eligible to

  10. PLURAL METALLIC COATINGS ON URANIUM AND METHOD OF APPLYING SAME

    DOEpatents

    Gray, A.G.

    1958-09-16

    A method is described of applying protective coatings to uranlum articles. It consists in applying chromium plating to such uranium articles by electrolysis in a chromic acid bath and subsequently applying, to this minum containing alloy. This aluminum contalning alloy (for example one of aluminum and silicon) may then be used as a bonding alloy between the chromized surface and an aluminum can.

  11. Applied Mathematics | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Applied Mathematics Advanced Scientific Computing Research (ASCR) ASCR Home About Research Applied Mathematics Applied Mathematics Conferences And Workshops Computer Science Next Generation Networking Scientific Discovery through Advanced Computing (SciDAC) ASCR SBIR-STTR Facilities Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) Community Resources Contact Information Advanced Scientific Computing Research U.S. Department of

  12. CX-009419: Categorical Exclusion Determination

    Energy.gov [DOE]

    Magnetic Pulser CX(s) Applied: None applied. Date: 10/30/2012 Location(s): Missouri Offices(s): Kansas City Site Office

  13. CX-009420: Categorical Exclusion Determination

    Energy.gov [DOE]

    Additive Manufacturing Using EOSINT M280 CX(s) Applied: None applied. Date: 10/30/2012 Location(s): Missouri Offices(s): Kansas City Site Office

  14. CX-009418: Categorical Exclusion Determination

    Energy.gov [DOE]

    Electron Beam Melting CX(s) Applied: None applied. Date: 10/30/2012 Location(s): Missouri Offices(s): Kansas City Site Office

  15. Improved analysis techniques for cylindrical and spherical double probes

    SciTech Connect

    Beal, Brian; Brown, Daniel; Bromaghim, Daron; Johnson, Lee; Blakely, Joseph

    2012-07-15

    A versatile double Langmuir probe technique has been developed by incorporating analytical fits to Laframboise's numerical results for ion current collection by biased electrodes of various sizes relative to the local electron Debye length. Application of these fits to the double probe circuit has produced a set of coupled equations that express the potential of each electrode relative to the plasma potential as well as the resulting probe current as a function of applied probe voltage. These equations can be readily solved via standard numerical techniques in order to determine electron temperature and plasma density from probe current and voltage measurements. Because this method self-consistently accounts for the effects of sheath expansion, it can be readily applied to plasmas with a wide range of densities and low ion temperature (T{sub i}/T{sub e} Much-Less-Than 1) without requiring probe dimensions to be asymptotically large or small with respect to the electron Debye length. The presented approach has been successfully applied to experimental measurements obtained in the plume of a low-power Hall thruster, which produced a quasineutral, flowing xenon plasma during operation at 200 W on xenon. The measured plasma densities and electron temperatures were in the range of 1 Multiplication-Sign 10{sup 12}-1 Multiplication-Sign 10{sup 17} m{sup -3} and 0.5-5.0 eV, respectively. The estimated measurement uncertainty is +6%/-34% in density and +/-30% in electron temperature.

  16. EERE's Usability and Analysis Techniques Guidebook

    Office of Energy Efficiency and Renewable Energy (EERE)

    For more information on the usability techniques associated with the templates, see EERE's Usability and Analysis Techniques Guidebook, which is a collection of best practices for creating and running different kinds of user-centered design projects.

  17. NREL: Measurements and Characterization - Capacitance Techniques

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Photoluminescence Spectroscopy Minority-Carrier Lifetime Spectroscopy Fourier-Transform Infrared & Raman Spectroscopy Spectroscopic Ellipsometry Capacitance Techniques Scanning ...

  18. Summary of the Nevada Applied Ecology Group and correlative programs. Version 1

    SciTech Connect

    Friesen, H.N.

    1992-10-01

    This summary document presents results in a broad context; it is not limited to findings of the Nevada Applied Ecology Group. This book is organized to present the findings of the Nevada Applied Ecology Group and correlative programs in accordance with the originally stated objectives of the Nevada Applied Ecology Group. This plan, in essence, traces plutonium from its injection into the environment to movement in the ecosystem to development of cleanup techniques. Information on other radionuclides was also obtained and will be presented briefly. Chapter 1 presents a brief description of the ecological setting of the Test Range Complex. The results of investigations for plutonium distribution are presented in Chapter 2 for the area surrounding the Test Range Complex and in Chapter 3 for on-site locations. Chapters 4 and 5 present the results of investigations concerned with concentrations and movement, respectively, of plutonium in the ecosystem of the Test Range Complex, and Chapter 6 summarizes the potential hazard from this plutonium. Development of techniques for cleanup and treatment is presented in Chapter 7, and the inventory of radionuclides other than plutonium is presented briefly in Chapter 8.

  19. Adaptive array technique for differential-phase reflectometry in QUEST

    SciTech Connect

    Idei, H. Hanada, K.; Zushi, H.; Nagata, K.; Mishra, K.; Itado, T.; Akimoto, R.; Yamamoto, M. K.

    2014-11-15

    A Phased Array Antenna (PAA) was considered as launching and receiving antennae in reflectometry to attain good directivity in its applied microwave range. A well-focused beam was obtained in a launching antenna application, and differential-phase evolution was properly measured by using a metal reflector plate in the proof-of-principle experiment at low power test facilities. Differential-phase evolution was also evaluated by using the PAA in the Q-shu University Experiment with Steady State Spherical Tokamak (QUEST). A beam-forming technique was applied in receiving phased-array antenna measurements. In the QUEST device that should be considered as a large oversized cavity, standing wave effect was significantly observed with perturbed phase evolution. A new approach using derivative of measured field on propagating wavenumber was proposed to eliminate the standing wave effect.

  20. Lidar techniques for chemical and aerosol air pollution studies

    SciTech Connect

    Hardesty, R.M.

    1993-12-31

    At the Wave Propagation Laboratory (WPL), lidar methods are being applied in several areas of air pollution research. Differential absorption lidar (DIAL) systems for measuring ozone, ethylene, and other pollutants have been recently developed. The ozone instrument profiles ozone concentration in the boundary layer and lower troposphere to study sources, sinks, and transport of ozone. A goal is to combine DIAL and Doppler lidar techniques for measurement of the vertical fluxes of ozone and other pollutants. Doppler lidars have been also used at WPL to study visibility reduction caused by aerosol pollutants at the Grand Canyon, and to investigate dispersion of hazardous emissions near the Rocky Flats nuclear plant.

  1. Building America Webinar: Opportunities to Apply Phase Change Materials to

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building Enclosures | Department of Energy to Apply Phase Change Materials to Building Enclosures Building America Webinar: Opportunities to Apply Phase Change Materials to Building Enclosures This webinar, presented by research team Fraunhofer Center for Sustainable Energy Systems (CSE), reviewed basic physical characteristics and thermal properties of phase change materials (PCMs) and provided guidance on how to effectively apply PCMs in buildings in the United States.

  2. Opportunities to Apply Phase Change Materials to Building Enclosures

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Webinar | Department of Energy Opportunities to Apply Phase Change Materials to Building Enclosures Webinar Opportunities to Apply Phase Change Materials to Building Enclosures Webinar Slides from the Building America webinar on November 11, 2011. webinar_pcm_enclosures_20111111.pdf (2.99 MB) More Documents & Publications Building America Webinar: Opportunities to Apply Phase Change Materials to Building Enclosures Vehicle Technologies Office Merit Review 2016: ePATHS - electrical PCM

  3. Overview and Progress of the Applied Battery Research (ABR) Activity |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Applied Battery Research (ABR) Activity Overview and Progress of the Applied Battery Research (ABR) Activity 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting es014_faguy_2012_o.pdf (2.07 MB) More Documents & Publications Fabricate PHEV Cells for Testing & Diagnostics Overview and Progress of the Applied Battery Research (ABR) Activity Current Research Activities in Electrode and Cell

  4. El Paso County Geothermal Project: Innovative Research Technologies Applied

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    to the Geothermal Reosurce Potential at Fort Bliss | Department of Energy El Paso County Geothermal Project: Innovative Research Technologies Applied to the Geothermal Reosurce Potential at Fort Bliss El Paso County Geothermal Project: Innovative Research Technologies Applied to the Geothermal Reosurce Potential at Fort Bliss El Paso County Geothermal Project: Innovative Research Technologies Applied to the Geothermal Reosurce Potential at Fort Bliss presentation at the April 2013 peer

  5. Where to Apply for Weatherization Assistance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Program » Where to Apply for Weatherization Assistance Where to Apply for Weatherization Assistance To apply for weatherization assistance you need to contact your state weatherization agency. The U.S. Department of Energy (DOE) does not provide weatherization services or services of any kind to individuals. DOE also does not process applications-this process is handled by each state. How to Determine if You Are Eligible for Weatherization Assistance One of the primary factors affecting

  6. Large Eddy Simulation (LES) Applied to Advanced Engine Combustion Research

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Advanced Engine Combustion Research Large Eddy Simulation (LES) Applied to Advanced Engine Combustion Research 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting ace007_oefelein_2012_o.pdf (6.57 MB) More Documents & Publications Large Eddy Simulation (LES) Applied to Advanced Engine Combustion Research Large Eddy Simulation (LES) Applied to Low-Temperature and Diesel

  7. Apply for the Parallel Computing Summer Research Internship

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    How to Apply Apply for the Parallel Computing Summer Research Internship Creating next-generation leaders in HPC research and applications development Program Co-Lead Robert (Bob) Robey Email Program Co-Lead Hai Ah Nam Email Program Co-Lead Kris Garrett Email Program Co-Lead Joseph Schoonover Email Professional Staff Assistant Nicole Aguilar Garcia (505) 665-3048 Email Application deadline is January 27, 2017 with notification by mid-February 2017. Who can apply? Upper division undergraduate

  8. Am Shav Technological Applied Development Center | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Technological Applied Development Center Place: Israel Sector: Services Product: General Financial & Legal Services ( Private family-controlled ) References: Am-Shav...

  9. Apply: Funding Opportunity - Advancing Solutions to Improve Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Advancing Solutions to Improve Energy Efficiency of Commercial Buildings Apply: Funding Opportunity - Advancing Solutions to Improve Energy Efficiency of Commercial Buildings ...

  10. Apply: Small Business Funding Opportunity for Lighting, Integrated...

    Office of Environmental Management (EM)

    Small Business Funding Opportunity for Lighting, Integrated Storage, and Distributed Generation Apply: Small Business Funding Opportunity for Lighting, Integrated Storage, and ...

  11. Crivelli, Silvia; Meza, Juan 60 APPLIED LIFE SCIENCES Ernest...

    Office of Scientific and Technical Information (OSTI)

    folding via divide-and-conquer optimization Oliva, Ricardo; Crivelli, Silvia; Meza, Juan 60 APPLIED LIFE SCIENCES Ernest Orlando Lawrence Berkeley NationalLaboratory, Berkeley, CA...

  12. ENERGY STAR Webinar: How to Apply for the ENERGY STAR

    Energy.gov [DOE]

    The U.S. Environmental Protection Agency (EPA) is hosting a webinar on how to apply for ENERGY STAR certification in Portfolio Manager.

  13. Identification of multi-modal plasma responses to applied magnetic...

    Office of Scientific and Technical Information (OSTI)

    Title: Identification of multi-modal plasma responses to applied magnetic ... Type: Publisher's Accepted Manuscript Journal Name: Physics of Plasmas Additional Journal ...

  14. Building America Whole-House Solutions for Existing Homes: Applying...

    Energy Saver

    Building America Whole-House Solutions for Existing Homes: Applying Best Practices to Florida Local Government Retrofit Programs - Central Florida (Fact Sheet) Building America ...

  15. Experts Meeting: Behavioral Economics as Applied to Energy Demand...

    Energy Information Administration (EIA) (indexed site)

    Experts Meeting: Behavioral Economics as Applied to Energy Demand Analysis and Energy Efficiency Programs EIA Office of Energy Consumption and Efficiency Analysis July 17, 2013 | ...

  16. Attenuation-Based Remedies in the Subsurface Applied Field Research...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The mission of the Attenuation Based Remedies in the Subsurface Applied Field Research Initiative is to seek holistic solutions to DOE's groundwater contamination problems that ...

  17. Modular Applied General Equilibrium Tool (MAGNET) | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Related Tools CRiSTAL Forests MCA4Climate - Guidance for scientifically sound climate change planning Environmental Impact and Sustainability Applied General Equilibrium Model...

  18. Applied Solar LLC formerly Open Energy Corp and Barnabus Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Open Energy Corp and Barnabus Energy Inc Jump to: navigation, search Name: Applied Solar LLC (formerly Open Energy Corp and Barnabus Energy Inc) Place: San Diego, California...

  19. The generalized finite element method applied to the dynamic...

    Office of Scientific and Technical Information (OSTI)

    Title: The generalized finite element method applied to the dynamic response of heterogeneous media. Authors: Robbins, Joshua ; Voth, Thomas E. Publication Date: 2013-02-01 OSTI ...

  20. BLM Manual 2804: Applying for FLPMA Grants | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: BLM Manual 2804: Applying for FLPMA GrantsPermittingRegulatory...

  1. Apply: Building Energy Efficiency Frontiers and Incubator Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building Energy Efficiency Frontiers and Incubator Technologies (BENEFIT) - 2014 (DE-FOA-0001027) Apply: Building Energy Efficiency Frontiers and Incubator Technologies (BENEFIT) - ...

  2. Solar Applied Materials Technology Corp | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Name: Solar Applied Materials Technology Corp Place: Tainan, Taiwan Product: Taiwan's material process specialists with over 20 years experience and in the areas of sputtering...

  3. Energy Department Announces Up to $14 Million for Applying Landscape...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Applying landscape design to bioenergy production systems is a promising approach for meeting multiple environmental, social, and economic objectives, such as maintaining or ...

  4. Applying Risk Communication to the Transportation of Radioactive...

    Office of Environmental Management (EM)

    May 2010 Page 1 Applying Risk Communication Principles Presented by: Ron Edmond Oak Ridge ... information How to integrate risk communication principles into individual ...

  5. Applied Studies and Technology (AS&T) | Department of Energy

    Energy.gov [DOE] (indexed site)

    Applied Studies and Technology (AS&T) DOE established the Environmental Sciences Laboratory (ESL) in Grand Junction, Colorado, in 1991 to support its programs. ESL scientists ...

  6. Sandian Named Fellow of the Society for Industrial and Applied...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Facilities Advanced Materials Laboratory Center for ... and Applied Mathematics HomeResearch & Capabilities, Staff... prizes: the IEEE International Conference on Data ...

  7. Building America Whole-House Solutions for Existing Homes: Applying...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Homes: Applying Best Practices to Florida Local Government Retrofit Programs - Central Florida (Fact Sheet) Building America Whole-House Solutions for Existing Homes: ...

  8. D&D Toolbox Project - Technology Demonstration of Fixatives Applied...

    Energy.gov [DOE] (indexed site)

    D&D Toolbox Project - Technology Demonstration of Fixatives Applied to Hot Cell Facilities via Remote Sprayer Platforms (215.59 KB) More Documents & Publications Demonstration of ...

  9. Expert Meeting Report: Recommendations for Applying Water Heaters...

    Energy Saver

    Recommendations for Applying Water Heaters in Combination Space and Domestic Water Heating Systems A. Rudd, K. Ueno, D. Bergey, R. Osser Building Science Corporation June 2012 i ...

  10. Applied Materials Switzerland SA Formerly HCT Shaping Systems...

    OpenEI (Open Energy Information) [EERE & EIA]

    Switzerland SA Formerly HCT Shaping Systems SA Jump to: navigation, search Name: Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA) Place: Chezeaux, Switzerland...

  11. Composition for applying antireflective coating on solar cell

    SciTech Connect

    Whitehouse, D.L.

    1983-10-25

    A method is disclosed, and the composition, for the application of an antireflective coating on solar cells and the subsequent application of metal contacts comprising applying a screen to the surface of a solar cell, applying a paste comprising a metal alkoxide over the screen, heat treating the cell and metal alkoxide paste, and nickel plating the resultant cell.

  12. Method for applying antireflective coating on solar cell

    SciTech Connect

    Whitehouse, D.L.

    1982-05-04

    A method for the application and the composition of an antireflective coating on solar cells and the subsequent application of metal contacts comprises applying a screen to the surface of a solar cell, applying a paste comprising a metal alkoxide over the screen, heat treating the cell and metal alkoxide paste, and nickel plating the resultant cell.

  13. Deep Vadose Zone Applied Field Research Initiative (DVZ AFRI) - Overview

    SciTech Connect

    2011-02-01

    The Deep Vadoze Zone Applied Field Research Initiative (DVZ AFRI) was established to protect water resources and to address the challenge of preventing contamination in the deep vadose zone from reaching groundwater. This factsheet provides an overview of the initiative and the approach to integrate basic science and needs-driven applied research activities with cleanup operations.

  14. ENERGY STAR Webinar: How to Apply for the ENERGY STAR

    Energy.gov [DOE]

    The U.S. Environmental Protection Agency (EPA) is hosting a webinar on how to apply for ENERGY STAR certification in Portfolio Manager. Understand the value of the ENERGY STAR certification, see the step-by-step process of applying, and gain tips to help your property get from application to award.

  15. Magnetic relaxometry as applied to sensitive cancer detection and

    Office of Scientific and Technical Information (OSTI)

    localization (Journal Article) | DOE PAGES Magnetic relaxometry as applied to sensitive cancer detection and localization Title: Magnetic relaxometry as applied to sensitive cancer detection and localization Here we describe superparamagnetic relaxometry (SPMR), a technology that utilizes highly sensitive magnetic sensors and superparamagnetic nanoparticles for cancer detection. Using SPMR, we sensitively and specifically detect nanoparticles conjugated to biomarkers for various types of

  16. ENERGY STAR Webinar: How to Apply for ENERGY STAR

    Energy.gov [DOE]

    The U.S. Environmental Protection Agency (EPA) ENERGY STAR is hosting a webinar on how to apply for ENERGY STAR Certification in Portfolio Manager. Understand the value of the ENERGY STAR certification, see the step-by-step process of applying, and gain tips to help your property get from application to award.

  17. Applied research in the solar thermal-energy-systems program

    SciTech Connect

    Brown, C. T.; Lefferdo, J. M.

    1981-03-01

    Within the Solar Thermal Research and Advanced Development (RAD) program a coordinated effort in materials research, fuels and chemical research and applied research is being carried out to meet the systems' needs. Each of these three program elements are described with particular attention given to the applied research activity.

  18. Results of NDE Technique Evaluation of Clad Hydrides

    SciTech Connect

    Dennis C. Kunerth

    2014-09-01

    This report fulfills the M4 milestone, M4FT-14IN0805023, Results of NDE Technique Evaluation of Clad Hydrides, under Work Package Number FT-14IN080502. During service, zirconium alloy fuel cladding will degrade via corrosion/oxidation. Hydrogen, a byproduct of the oxidation process, will be absorbed into the cladding and eventually form hydrides due to low hydrogen solubility limits. The hydride phase is detrimental to the mechanical properties of the cladding and therefore it is important to be able to detect and characterize the presence of this constituent within the cladding. Presently, hydrides are evaluated using destructive examination. If nondestructive evaluation techniques can be used to detect and characterize the hydrides, the potential exists to significantly increase test sample coverage while reducing evaluation time and cost. To demonstrate the viability this approach, an initial evaluation of eddy current and ultrasonic techniques were performed to demonstrate the basic ability to these techniques to detect hydrides or their effects on the microstructure. Conventional continuous wave eddy current techniques were applied to zirconium based cladding test samples thermally processed with hydrogen gas to promote the absorption of hydrogen and subsequent formation of hydrides. The results of the evaluation demonstrate that eddy current inspection approaches have the potential to detect both the physical damage induced by hydrides, e.g. blisters and cracking, as well as the combined effects of absorbed hydrogen and hydride precipitates on the electrical properties of the zirconium alloy. Similarly, measurements of ultrasonic wave velocities indicate changes in the elastic properties resulting from the combined effects of absorbed hydrogen and hydride precipitates as well as changes in geometry in regions of severe degradation. However, for both approaches, the signal responses intended to make the desired measurement incorporate a number of contributing

  19. Scanning angle Raman spectroscopy: Investigation of Raman scatter enhancement techniques for chemical analysis

    SciTech Connect

    Meyer, Matthew W.

    2013-01-01

    This thesis outlines advancements in Raman scatter enhancement techniques by applying evanescent fields, standing-waves (waveguides) and surface enhancements to increase the generated mean square electric field, which is directly related to the intensity of Raman scattering. These techniques are accomplished by employing scanning angle Raman spectroscopy and surface enhanced Raman spectroscopy. A 1064 nm multichannel Raman spectrometer is discussed for chemical analysis of lignin. Extending dispersive multichannel Raman spectroscopy to 1064 nm reduces the fluorescence interference that can mask the weaker Raman scattering. Overall, these techniques help address the major obstacles in Raman spectroscopy for chemical analysis, which include the inherently weak Raman cross section and susceptibility to fluorescence interference.

  20. Comparing and assessing different measurement techniques for mercury in coal systhesis gas

    SciTech Connect

    Maxwell, D.P.; Richardson, C.F.

    1995-11-01

    Three mercury measurement techniques were performed on synthesis gas streams before and after an amine-based sulfur removal system. The syngas was sampled using (1) gas impingers containing a nitric acid-hydrogen peroxide solution, (2) coconut-based charcoal sorbent, and (3) an on-line atomic absorption spectrophotometer equipped with a gold amalgamation trap and cold vapor cell. Various impinger solutions were applied upstream of the gold amalgamation trap to remove hydrogen sulfide and isolate oxidized and elemental species of mercury. The results from these three techniques are compared to provide an assessment of these measurement techniques in reducing gas atmospheres.

  1. Airborne electromagnetic surveys as a reconnaissance technique...

    OpenEI (Open Energy Information) [EERE & EIA]

    it was thought that a shallow exploration technique would not be effective. Extensive audio-magnetotelluric (AMT) work by the USGS in KGRA's showed that many geothermal systems...

  2. Active Load Control Techniques for Wind Turbines

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Active Load Control Techniques for Wind Turbines Scott J. Johnson and C. P. "Case" van Dam Department of Mechanical and Aeronautical Engineering University of California One ...

  3. Transportation Techniques LLC | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Techniques LLC Place: Denver, CO, Colorado Zip: 80205 Sector: Vehicles Product: Colorado-USA-based company that uses patented series hybrid technology to design and develop hybrid...

  4. Eddy current technique for predicting burst pressure

    DOEpatents

    Petri, Mark C.; Kupperman, David S.; Morman, James A.; Reifman, Jaques; Wei, Thomas Y. C.

    2003-01-01

    A signal processing technique which correlates eddy current inspection data from a tube having a critical tubing defect with a range of predicted burst pressures for the tube is provided. The method can directly correlate the raw eddy current inspection data representing the critical tubing defect with the range of burst pressures using a regression technique, preferably an artificial neural network. Alternatively, the technique deconvolves the raw eddy current inspection data into a set of undistorted signals, each of which represents a separate defect of the tube. The undistorted defect signal which represents the critical tubing defect is related to a range of burst pressures utilizing a regression technique.

  5. Footprinting Technique Gives ALS Users New Insights

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    left: Research Scientist Sayan Gupta, Beamline 5.3.1 Scientist Rich Celestre, and BCSB Head Corie Ralston. XFP, a powerful technique for the study of macromolecular structures...

  6. Accelerated Technique for Carbon Mesoporous Materials - Energy...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Advanced Materials Find More Like This Return to Search Accelerated Technique for Carbon Mesoporous Materials Oak Ridge National Laboratory Contact ORNL About This Technology...

  7. Multithreaded Global Address Space Communication Techniques

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Multithreaded Global Address Space Communication Techniques for Gyrokinetic Fusion ... of high communication work loads of the underlying kernel among OpenMP threads. ...

  8. EERE's Usability and Analysis Techniques Guidebook | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    see EERE's Usability and Analysis Techniques Guidebook, which is a collection of best practices for creating and running different kinds of user-centered design projects. ...

  9. Tomographic inversion techniques incorporating physical constraints...

    Office of Scientific and Technical Information (OSTI)

    In the case of low signal levels or partial spatial coverage of the plasma cross-section, standard inversion techniques utilizing matrix inversion and linear-regularization often ...

  10. Promising technique improves hydrogen production of affordable...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    (Materialscientist, Wikipedia) (click image to enlarge) Promising technique improves hydrogen production of affordable alternative to platinum By Angela Hardin * October 26, 2015...

  11. Category:Electromagnetic Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    3 subcategories, out of 3 total. A Airborne Electromagnetic Survey 1 pages G + Ground Electromagnetic Techniques (2 categories) 3 pages S Self Potential...

  12. Category:Data Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    1 pages G Geographic Information System 1 pages Geothermal Literature Review 1 pages Pages in category "Data Techniques" The following 4 pages are in...

  13. Comparison of 17 Ice Nucleation Measurement Techniques

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    17 Ice Nucleation Measurement Techniques for Immersion Freezing For original submission and image(s), see ARM Research Highlights http:www.arm.govsciencehighlights Research...

  14. Computer assisted audit techniques for UNIX (UNIX-CAATS)

    SciTech Connect

    Polk, W.T.

    1991-12-31

    Federal and DOE regulations impose specific requirements for internal controls of computer systems. These controls include adequate separation of duties and sufficient controls for access of system and data. The DOE Inspector General`s Office has the responsibility to examine internal controls, as well as efficient use of computer system resources. As a result, DOE supported NIST development of computer assisted audit techniques to examine BSD UNIX computers (UNIX-CAATS). These systems were selected due to the increasing number of UNIX workstations in use within DOE. This paper describes the design and development of these techniques, as well as the results of testing at NIST and the first audit at a DOE site. UNIX-CAATS consists of tools which examine security of passwords, file systems, and network access. In addition, a tool was developed to examine efficiency of disk utilization. Test results at NIST indicated inadequate password management, as well as weak network resource controls. File system security was considered adequate. Audit results at a DOE site indicated weak password management and inefficient disk utilization. During the audit, we also found improvements to UNIX-CAATS were needed when applied to large systems. NIST plans to enhance the techniques developed for DOE/IG in future work. This future work would leverage currently available tools, along with needed enhancements. These enhancements would enable DOE/IG to audit large systems, such as supercomputers.

  15. Computer assisted audit techniques for UNIX (UNIX-CAATS)

    SciTech Connect

    Polk, W.T.

    1991-01-01

    Federal and DOE regulations impose specific requirements for internal controls of computer systems. These controls include adequate separation of duties and sufficient controls for access of system and data. The DOE Inspector General's Office has the responsibility to examine internal controls, as well as efficient use of computer system resources. As a result, DOE supported NIST development of computer assisted audit techniques to examine BSD UNIX computers (UNIX-CAATS). These systems were selected due to the increasing number of UNIX workstations in use within DOE. This paper describes the design and development of these techniques, as well as the results of testing at NIST and the first audit at a DOE site. UNIX-CAATS consists of tools which examine security of passwords, file systems, and network access. In addition, a tool was developed to examine efficiency of disk utilization. Test results at NIST indicated inadequate password management, as well as weak network resource controls. File system security was considered adequate. Audit results at a DOE site indicated weak password management and inefficient disk utilization. During the audit, we also found improvements to UNIX-CAATS were needed when applied to large systems. NIST plans to enhance the techniques developed for DOE/IG in future work. This future work would leverage currently available tools, along with needed enhancements. These enhancements would enable DOE/IG to audit large systems, such as supercomputers.

  16. Infrared Spectroscopy of Explosives Residues: Measurement Techniques and Spectral Analysis

    SciTech Connect

    Phillips, Mark C.; Bernacki, Bruce E.

    2015-03-11

    Infrared laser spectroscopy of explosives is a promising technique for standoff and non-contact detection applications. However, the interpretation of spectra obtained in typical standoff measurement configurations presents numerous challenges. Understanding the variability in observed spectra from explosives residues and particles is crucial for design and implementation of detection algorithms with high detection confidence and low false alarm probability. We discuss a series of infrared spectroscopic techniques applied toward measuring and interpreting the reflectance spectra obtained from explosives particles and residues. These techniques utilize the high spectral radiance, broad tuning range, rapid wavelength tuning, high scan reproducibility, and low noise of an external cavity quantum cascade laser (ECQCL) system developed at Pacific Northwest National Laboratory. The ECQCL source permits measurements in configurations which would be either impractical or overly time-consuming with broadband, incoherent infrared sources, and enables a combination of rapid measurement speed and high detection sensitivity. The spectroscopic methods employed include standoff hyperspectral reflectance imaging, quantitative measurements of diffuse reflectance spectra, reflection-absorption infrared spectroscopy, microscopic imaging and spectroscopy, and nano-scale imaging and spectroscopy. Measurements of explosives particles and residues reveal important factors affecting observed reflectance spectra, including measurement geometry, substrate on which the explosives are deposited, and morphological effects such as particle shape, size, orientation, and crystal structure.

  17. CX-014313: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    13: Categorical Exclusion Determination CX-014313: Categorical Exclusion Determination Development of Dual Purpose Organic Semiconductor Thin Films for Polymer Interface and Electrostatic Applications CX(s) Applied: B3.6 Date: 08/20/2015 Location(s): South Carolina Offices(s): Savannah River Operations Office Sample preparation techniques such as surface and sample modification/deposition and self-assembled monolayer formation will be performed. Sample modification/deposition, self-assembled

  18. Applied Research in Earth Sciences (ARiES) Summer School

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Center for Space and Earth Science Los Alamos National LaboratoryApplied Research in Earth Sciences Summer School NSEC » CSES » ARiES Applied Research in Earth Sciences (ARiES) Summer School June 5th - July 28th, 2017 Contacts Co-Director Elizabeth Miller Co-Director Emily Schultz-Fellenz Co-Director Aviva Sussman Administrative Assistant Winona Ortiz Email Request more information Email Application period will be opening in January 2017 - check back for more information! The 2017 Applied

  19. How to Apply for an SES Position | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    How to Apply for an SES Position How to Apply for an SES Position The Senior Executive Service (SES) is an elite group of men and women meeting the highest professional standards who administer public programs at the top levels of the Federal government. SES employees' salaries are linked directly to individual performance. The U.S. Office of Personnel Management's (OPM) SES web page contains a host of information that may be benefical to you. To apply for current SES positions within the

  20. Ion beam analysis techniques in interdisciplinary applications

    SciTech Connect

    Respaldiza, Miguel A.; Ager, Francisco J.

    1999-11-16

    The ion beam analysis techniques emerge in the last years as one of the main applications of electrostatic accelerators. A short summary of the most used IBA techniques will be given as well as some examples of applications in interdisciplinary sciences.

  1. Opto-electrokinetic manipulation technique for highperformance

    SciTech Connect

    Kwon, Jae-Sung [Purdue University; Ravindranath, Sandeep [Purdue University; Kumar, Aloke [ORNL; Irudayaraj, Joseph [Purdue University; Wereley, Steven T. [Purdue University

    2012-01-01

    This communication first demonstrates bio-compatibility of a recently developed opto-electrokinetic manipulation technique, using microorganisms. Aggregation, patterning, translation, trapping and size-based separation of microorganisms performed with the technique firmly establishes its usefulness for development of a high-performance on-chip bioassay system.

  2. Waterflood surveillance techniques; A reservoir management approach

    SciTech Connect

    Thakur, G.C. )

    1991-10-01

    The reservoir management aspects of waterflooding span the time before the start of waterflood to the time when the secondary recovery either is uneconomic or is changed to an enhanced recovery. This paper reviews waterflood techniques and reports on surveillance techniques in the management of waterflooding of oil wells.

  3. Method for applying a high-temperature bond coat on a metal substrate, and related compositions and articles

    DOEpatents

    Hasz, Wayne Charles; Sangeeta, D

    2002-01-01

    A method for applying a bond coat on a metal-based substrate is described. A slurry which contains braze material and a volatile component is deposited on the substrate. The slurry can also include bond coat material. Alternatively, the bond coat material can be applied afterward, in solid form or in the form of a second slurry. The slurry and bond coat are then dried and fused to the substrate. A repair technique using this slurry is also described, along with related compositions and articles.

  4. Method for applying a high-temperature bond coat on a metal substrate, and related compositions and articles

    SciTech Connect

    Hasz, Wayne Charles; Sangeeta, D

    2006-04-18

    A method for applying a bond coat on a metal-based substrate is described. A slurry which contains braze material and a volatile component is deposited on the substrate. The slurry can also include bond coat material. Alternatively, the bond coat material can be applied afterward, in solid form or in the form of a second slurry. The slurry and bond coat are then dried and fused to the substrate. A repair technique using this slurry is also described, along with related compositions and articles.

  5. Deep Vadose Zone Applied Field Research Initiative (DVZ-AFRI)

    Energy.gov [DOE]

    Located on the Hanford Site in Richland, Washington, the Deep Vadose Zone Applied Field Research Initiative (DVZ AFRI) was established to protect water resources by addressing the challenge of...

  6. Webinar: Understanding and Applying TM-30-15

    Energy.gov [DOE]

    The IES recently approved TM-30-15, a new method for evaluating light source color rendition. This webinar, “Understanding and Applying TM-30-15, the IES Method for Evaluating Light Source Color...

  7. Mission Driven and Applied Science | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Integrating for Materials Technology, Engineering, Education, and Research (i-MatTER) i-MatTER matches our centers with applied activities in WDTS, EERE, FE, ARPA-E, technology ...

  8. Behavioral Economics Applied to Energy Demand Analysis: A Foundation

    Energy Information Administration (EIA) (indexed site)

    Behavioral Economics Applied to Energy Demand Analysis: A Foundation October 2014 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. ...

  9. Lena F. Kourkoutis > Assistant ProfessorApplied and Engineering...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    She then went to Germany as a Humboldt Fellow at the Max Planck Institute of Biochemistry. in 2012, she returned to the Department of Applied & Engineering Physics, where she was ...

  10. ENERGY STAR Webinar: How to Apply for the ENERGY STAR

    Energy.gov [DOE]

    The U.S. Environmental Protection Agency (EPA) is hosting a webinar on how to apply for ENERGY STAR certification in Portfolio Manager. Understand the value of the ENERGY STAR certification, see...

  11. How to Apply for Weatherization Assistance | Department of Energy

    Energy Saver

    The funds announced earlier this month allow for people who make up to 200% of the federal poverty level to apply for weatherization-which is about 44,000 for a family of four in ...

  12. presentation slides: UNDERSTANDING AND APPLYING TM-30-15 | Department...

    Energy Saver

    TM-30-15 presentation slides: UNDERSTANDING AND APPLYING TM-30-15 PDF icon tm30-intro-webinar9-15-15.pdf More Documents & Publications Evaluating Color Rendition Using IES...

  13. Apply: Increase Residential Energy Code Compliance Rates (DE...

    Office of Environmental Management (EM)

    Increase Residential Energy Code Compliance Rates (DE-FOA-0000953) Apply: Increase Residential Energy Code Compliance Rates (DE-FOA-0000953) April 21, 2014 - 12:32pm Addthis This ...

  14. CONTRACTOR LEGAL MANAGEMENT REQUIREMENTS: APPLYING THE FINAL RULE TO

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EXISTING CONTRACTS | Department of Energy CONTRACTOR LEGAL MANAGEMENT REQUIREMENTS: APPLYING THE FINAL RULE TO EXISTING CONTRACTS CONTRACTOR LEGAL MANAGEMENT REQUIREMENTS: APPLYING THE FINAL RULE TO EXISTING CONTRACTS The Department issued a Final Rule revising the regulations covering contractor legal management requirements at 10 C.F.R. 719 (Federal Register May 3, 2013; http://www.gpo.gov/fdsys/pkg/FR-2013-05-03/pdf/2013-10485.pdf). It requires Contracting Officers to attempt to execute

  15. The Smart Grid Experience: Applying Results, Reaching Beyond - Summary of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Conference Proceedings (December 2014) | Department of Energy Grid Experience: Applying Results, Reaching Beyond - Summary of Conference Proceedings (December 2014) The Smart Grid Experience: Applying Results, Reaching Beyond - Summary of Conference Proceedings (December 2014) In October 2014, the Electric Power Research Institute (EPRI) and the U.S. Department of Energy's (DOE's) Office of Electricity Delivery and Energy Reliability (OE) held a conference to assess progress, impacts,

  16. Applying an Experimental Design Loop to Shape Memory Alloys (Conference) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Conference: Applying an Experimental Design Loop to Shape Memory Alloys Citation Details In-Document Search Title: Applying an Experimental Design Loop to Shape Memory Alloys Authors: Hogden, John Edward [1] + Show Author Affiliations Los Alamos National Laboratory Publication Date: 2016-06-01 OSTI Identifier: 1257099 Report Number(s): LA-UR-16-23811 DOE Contract Number: AC52-06NA25396 Resource Type: Conference Resource Relation: Conference: Data Science and Optimal Learning

  17. Applying Risk Communication to the Transportation of Radioactive Materials

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Applying Risk Communication to the Transportation of Radioactive Materials Applying Risk Communication to the Transportation of Radioactive Materials Participants should expect to gain the following skills: How to recognize how the stakeholders prefer to receive information How to integrate risk communication principles into individual communication How to recognize the importance of earning trust and credibility How to identify stakeholders How to answer questions

  18. Apply for EERE Funding Opportunities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Apply for EERE Funding Opportunities Apply for EERE Funding Opportunities EERE uses Funding Opportunity Announcements (FOAs) to solicit applications in specific program areas and selects projects based on a merit review process that includes industry and technology experts. What to Expect During the Application Process Illustration showing the funding and approval process. The application process may include multiple phases: letter of intent, concept paper, full application phase, and

  19. Manufacturing techniques studies of ceramics by neutron and ?-ray radiography

    SciTech Connect

    Latini, R. M.; Bellido, A. V. B.; Souza, M. I. S.; Almeida, G. L.

    2014-11-11

    In this study, the aim was to evaluate capabilities and constraints of radiographic imagery using thermal neutrons and gamma-rays as tools to identify the type of technique employed in ceramics manufacturing especially that used in prehistoric Brazilian pottery from Acre state. For this purpose, radiographic images of test objects made with clay of this region using both techniques - palette and rollers - have been acquired with a system comprised of a source of gamma-rays or thermal neutrons and a corresponding X-ray or neutron-sensitive Imaging Plate as detector. For the neutrongraphy samples were exposed to a thermal neutron flux of order of 10{sup 5}n.cm{sup ?2}.s{sup ?1} for 3 minutes at main port of Argonauta research reactor of the Instituto de Engenharia Nuclear - IEN/CNEN. The radiographic images using ?-rays from {sup 165}Dy (95 keV) and {sup 198}Au (412 keV) both produced at this reactor, have been acquired under an exposure time of a couple of hours. After acquisition, images have undergone a treatment to improve their quality through enhancement of their contrast, a procedure involving corrections of the beam divergence, sample shape and averaging of the attenuation map profile. Preliminary results show that difference between manufacturing techniques is better identified by radiography using low energy ?-rays from {sup 165}Dy rather than neutrongraphy or ?-rays from {sup 198}Au. Nevertheless, disregarding the kind of employed radiation, it should be stressed that feasibility to apply the technique is tightly tied to homogeneity of the clay itself and tempers due to their different attenuation.

  20. Nondestructive analysis of oil shales with PGNAA technique

    SciTech Connect

    Maly, J.; Bozorgmanesh, H.

    1984-02-01

    The feasibility of nondestructive analysis of oil shales using the prompt gamma neutron activation analysis (PGNAA) technique was studied. The PGNAA technique, developed originally for continuous analysis of coal on the belt, was applied to the analysis of eight oil-shale samples, containing between 9 and 60 gallons of oil per ton and 0.8% to 3.4% hydrogen. The PGNAA technique was modified using four neutron moderation conditions: non-moderated neutrons; non-moderated and partially moderated neutrons reflected from a water box behind the source; neutrons moderated in a water box behind and in front of the source; and neutrons strongly moderated in a polyethylene block placed in front of the source and with reflected neutrons from a water box behind the source. The studied oil shales were measured in their aluminum or wooden (masonite) boxes. The obtained Ge-Li spectra were processed by LSI-11/23 computer, using the modified programs previously developed by SAI for continuous coal analysis. The results of such processing (the peak areas for several gamma lines) were corrected and plotted against the weight percent of each analyzed element (from the chemical analysis). Response curves developed for H, C, N, S, Na, Mg, Al, Si, Ti, Ca, Fe and K show generally good linear proportions of peak area to the weight percent of the element. For hydrogen determination, NMD conditions had to be used where the response curve was not linear, but followed a curve whose slope rose with hydrogen concentration. This effect is caused by improving neutron self-moderation in sample boxes of rich oil shales, as compared to poor self-moderation of neutrons in very lean oil shales. The moisture in oil shales was measured by microwave absorption technique in small masonite boxes. This method was calibrated four times using oil-shale samples mixed gradually with larger and larger amounts of water.

  1. Multiple-energy Techniques in Industrial Computerized Tomography

    DOE R&D Accomplishments

    Schneberk, D.; Martz, H.; Azevedo, S.

    1990-08-01

    Considerable effort is being applied to develop multiple-energy industrial CT techniques for materials characterization. Multiple-energy CT can provide reliable estimates of effective Z (Z{sub eff}), weight fraction, and rigorous calculations of absolute density, all at the spatial resolution of the scanner. Currently, a wide variety of techniques exist for CT scanners, but each has certain problems and limitations. Ultimately, the best multi-energy CT technique would combine the qualities of accuracy, reliability, and wide range of application, and would require the smallest number of additional measurements. We have developed techniques for calculating material properties of industrial objects that differ somewhat from currently used methods. In this paper, we present our methods for calculating Z{sub eff}, weight fraction, and density. We begin with the simplest case -- methods for multiple-energy CT using isotopic sources -- and proceed to multiple-energy work with x-ray machine sources. The methods discussed here are illustrated on CT scans of PBX-9502 high explosives, a lexan-aluminum phantom, and a cylinder of glass beads used in a preliminary study to determine if CT can resolve three phases: air, water, and a high-Z oil. In the CT project at LLNL, we have constructed several CT scanners of varying scanning geometries using {gamma}- and x-ray sources. In our research, we employed two of these scanners: pencil-beam CAT for CT data using isotopic sources and video-CAT equipped with an IRT micro-focal x-ray machine source.

  2. Engine control techniques to account for fuel effects (Patent...

    Office of Scientific and Technical Information (OSTI)

    Patent: Engine control techniques to account for fuel effects Citation Details In-Document Search Title: Engine control techniques to account for fuel effects A technique for ...

  3. PFT Air Infiltration Measurement Technique | Department of Energy

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Infiltration Measurement Technique PFT Air Infiltration Measurement Technique The Brookhaven National Laboratory developed the PFT (PerFluorocarbon tracer gas) technique to...

  4. Posters Testing of Newtonian Nudging Technique

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    7 Posters Testing of Newtonian Nudging Technique in Data Assimilation on the Meso-Beta-Scale Y.-R. Guo and Y.-H. Kuo National Center for Atmospheric Research Boulder, Colorado Introduction The Newtonian nudging technique originally developed by Anthes (1974) and Hoke and Anthes (1976) is a practical and flexible method for synoptic scale and meso-α-scale data assimilation (Kuo and Guo 1989; Stauffer and Seaman 1990). The application of the nudging technique for meso-ß-scale data assimilation

  5. Categorical Exclusion Determinations: A9 | Department of Energy

    Energy Saver

    ... September 9, 2016 CX-100743 Categorical Exclusion Determination Biomass Gasification for Chemicals Production Using Chemical Looping Techniques Award Number: DE-EE0007530 CX(s) ...

  6. Categorical Exclusion Determinations: Ohio | Department of Energy

    Energy.gov [DOE] (indexed site)

    September 9, 2016 CX-100743 Categorical Exclusion Determination Biomass Gasification for Chemicals Production Using Chemical Looping Techniques Award Number: DE-EE0007530 CX(s) ...

  7. Category:Field Techniques | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Sampling Field Techniques H Hand-held X-Ray Fluorescence (XRF) P Portable X-Ray Diffraction (XRD) Retrieved from "http:en.openei.orgwindex.php?titleCategory:FieldTechniq...

  8. Techniques for preventing accidental damage to pipelines

    SciTech Connect

    Lothon, A.; Akel, S.

    1996-12-31

    Following a survey of all of the techniques capable of preventing third-party damage to its gas transmission pipelines, Gaz de France has selected two of them, Electromagnetic Detection and Positioning by Satellite. The first technique is based on detection of the magnetic field existing around transmission pipes excited by a driving current. A receiver is mounted on the excavation equipment to detect the magnetic field, thereby preventing any risk of hitting the pipe. The second technique consists in locating excavators by satellite. Each excavator needs to be equipped with a GPS beacon to know its position. Using the map of the transmission network stored in data-base form, i.e., digitized, the system calculates the position of the excavator relative to the pipes buried in its vicinity so as to avoid any accidental contact. The main features, advantages and drawbacks of the two techniques are presented in this paper.

  9. Internal Benchmarking Outreach and Data Collection Techniques

    Energy.gov [DOE]

    U.S. Department of Energy (DOE) Technical Assistance Program (TAP) presentation at a TAP webinar held on April 11, 2013 and dealing with internal benchmarking outreach and data collection techniques.

  10. New technique images nanoparticles in solution

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    technique images nanoparticles in solution Click to share on Facebook (Opens in new window) Click to share on Twitter (Opens in new window) Click to share on Reddit (Opens in new ...

  11. A Survey of Techniques for Approximate Computing

    DOE PAGES [OSTI]

    Mittal, Sparsh

    2016-03-18

    Approximate computing trades off computation quality with the effort expended and as rising performance demands confront with plateauing resource budgets, approximate computing has become, not merely attractive, but even imperative. Here, we present a survey of techniques for approximate computing (AC). We discuss strategies for finding approximable program portions and monitoring output quality, techniques for using AC in different processing units (e.g., CPU, GPU and FPGA), processor components, memory technologies etc., and programming frameworks for AC. Moreover, we classify these techniques based on several key characteristics to emphasize their similarities and differences. Finally, the aim of this paper is tomore » provide insights to researchers into working of AC techniques and inspire more efforts in this area to make AC the mainstream computing approach in future systems.« less

  12. Data Capture Technique for High Speed Signaling

    DOEpatents

    Barrett, Wayne Melvin; Chen, Dong; Coteus, Paul William; Gara, Alan Gene; Jackson, Rory; Kopcsay, Gerard Vincent; Nathanson, Ben Jesse; Vranas, Paylos Michael; Takken, Todd E.

    2008-08-26

    A data capture technique for high speed signaling to allow for optimal sampling of an asynchronous data stream. This technique allows for extremely high data rates and does not require that a clock be sent with the data as is done in source synchronous systems. The present invention also provides a hardware mechanism for automatically adjusting transmission delays for optimal two-bit simultaneous bi-directional (SiBiDi) signaling.

  13. Microcrystallization techniques for serial femtosecond crystallography

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    using Photosystem II from Thermosynechococcus elongatus as a model system Microcrystallization techniques for serial femtosecond crystallography using Photosystem II from Thermosynechococcus elongatus as a model system Authors: Kupitz, C., Grotjohann, I., Conrad, C.E., Roy-Chowdhury, S., Fromme, R., and Fromme, P. Title: Microcrystallization techniques for serial femtosecond crystallography using Photosystem II from Thermosynechococcus elongatus as a model system Source: Phil. Trans. R. Soc.

  14. Techniques for Bs Mixing at CDF

    SciTech Connect

    Salamanna, Giuseppe; /Rome U. /INFN, Rome

    2005-12-01

    The techniques used to perform a measurement of the mixing frequency of the B{sub s} meson ({Delta}M{sub s}) with the CDF detector at the TeVatron collider are described. Particular stress is put on CDF techniques for flavor tagging, which is possibly the major issue for mixing measurements at a hadron collider. Also CDF performances on lifetime and final state reconstruction are described. The final result of the amplitude scanning presented at 2005 Winter Conferences is reported.

  15. Lidar techniques for search and rescue

    SciTech Connect

    Cabral, W.L.

    1985-01-01

    Four techniques for using LIDAR in Search and Rescue Operations will be discussed. The topic will include laser retroreflection, laser-induced fluorescence in the visible, laser-induced fluorescence during daylight hours, and laser-induced fluorescence in the uv. These techniques use high-repetition rate lasers at a variety of frequencies to induce either fluorescence in dye markers or retroreflection from plastic corner cubes on life preservers and other emergency markers.

  16. LOCO with Constraints and Improved Fitting Technique

    SciTech Connect

    Huang, Xiaobiao; Safranek, James; Portmann, Greg; /LBL, Berkeley

    2009-06-18

    } reduction, i.e., small {chi}{sup 2} reduction with large changes of {Delta}K. Under effects of random noise, the fitting solution tends to crawl toward these patterns and ends up with unrealistically large {Delta}K. Such a solution is not very useful in optics correction because after the solution is dialed in, the quadrupoles will not respond as predicted by the lattice model due to magnet hysteresis. We will show that adding constraints to the fitting parameters is an effective way to combat this problem of LOCO. In fact, it improves optics calibration precision even for machines that don't show severe degeneracy behavior. LOCO fitting is essentially to solve a nonlinear least square problem with an iterative approach. The linear least square technique is applied in each iteration to move the solution toward the minimum. This approach is commonly referred to as the Gauss-Newton method. By using singular value decomposition (SVD) to invert the Jacobian matrix, this method has generally been very successful for LOCO. However, this method is based on a linear expansion of the residual vector over the fitting parameters which is valid only when the starting solution is sufficiently close to the real minimum. The fitting algorithm can have difficulties to converge when the initial guess is too far off. For example, it's possible for the {chi}{sup 2} merit function to increase after an iteration instead of decrease. This situation can be improved by using more robust nonlinear least square fitting algorithms, such as the Levenberg-Marquardt method. We will discuss the degeneracy problem in section 2 and then show how the constrained fitting can help in section 3. The application of Levenberg-Marquadt method to LOCO is shown in section 4. A summary is given in section 5.

  17. CX-006491: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Categorical Exclusion Determination CX-006491: Categorical Exclusion Determination Photovoltaic Manufacturing Consortium CX(s) Applied: B3.6 Date: 09012011 Location(s): Florida...

  18. CX-007867: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Exclusion Determination CX-007867: Categorical Exclusion Determination Northeast Photovoltaic Regional Training Provider CX(s) Applied: A9, A11, B5.16 Date: 01272012...

  19. CX-010028: Categorical Exclusion Determination

    Energy.gov [DOE]

    Flame Forming Proppants CX(s) Applied: B3.6 Date: 01/17/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  20. CX-013995: Categorical Exclusion Determination

    Energy.gov [DOE]

    Meson Hill Well Abandonment CX CX(s) Applied: B3.1Date: 07/24/2015 Location(s): IllinoisOffices(s): Fermi Site Office

  1. CX-012809: Categorical Exclusion Determination

    Energy.gov [DOE]

    LURR 20140313 City of Vancouver Sewer Lateral CX(s) Applied: B4.9Date: 41906 Location(s): WashingtonOffices(s): Bonneville Power Administration

  2. CX-012122: Categorical Exclusion Determination

    Energy.gov [DOE]

    OCGen Module Mooring Project CX(s) Applied: B5.25 Date: 04/29/2014 Location(s): Maine Offices(s): Golden Field Office

  3. CX-008471: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Tree Planting Initiative - Rebuild Western Mass CX(s) Applied: A1 Date: 06/08/2012 Location(s): Massachusetts Offices(s): National Energy Technology Laboratory

  4. CX-010150: Categorical Exclusion Determination

    Energy.gov [DOE]

    Celilo Fiber System CX(s) Applied: B4.7 Date: 04/15/2013 Location(s): Oregon Offices(s): Bonneville Power Administration

  5. CX-010375: Categorical Exclusion Determination

    Energy.gov [DOE]

    Replace Existing Firehouse CX(s) Applied: B1.15 Date: 09/20/2011 Location(s): California Offices(s): Berkeley Site Office

  6. CX-012231: Categorical Exclusion Determination

    Energy.gov [DOE]

    Mica Peak Radio Station upgrade CX(s) Applied: B1.19 Date: 06/09/2014 Location(s): Washington Offices(s): Bonneville Power Administration

  7. CX-009515: Categorical Exclusion Determination

    Energy.gov [DOE]

    Tide Creek Property Funding CX(s) Applied: B1.25 Date: 11/08/2012 Location(s): Oregon Offices(s): Bonneville Power Administration

  8. CX-011215: Categorical Exclusion Determination

    Energy.gov [DOE]

    Nepese Marsh Upgrades CX(s) Applied: B2.5 Date: 10/17/2013 Location(s): Illinois Offices(s): Fermi Site Office

  9. FE Categorical Exclusions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    8, 2011 CX-006459: Categorical Exclusion Determination Analytical Physics - Transmission Electron Microscopy (TEM) CX(s) Applied: B3.6 Date: 08082011 Location(s): Albany, Oregon...

  10. CX-012606: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Preparing of Environmental Samples for Analysis CX(s) Applied: B3.6Date: 41810 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  11. CX-012581: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Demolition of Outfall Sampling Station CX(s) Applied: B1.23Date: 41844 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  12. CX-012572: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    H-Area Vehicle Barrier Installation CX(s) Applied: B1.15Date: 41862 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  13. CX-012566: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Z-Area Fire Tank Painting CX(s) Applied: B1.3Date: 41865 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  14. CX-012628: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Deactivation and Decommissioning of 711-L CX(s) Applied: B1.23Date: 41793 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  15. CX-012559: Categorical Exclusion Determination

    Energy.gov [DOE]

    Seal Access Plugs at 105-C CX(s) Applied: B1.3Date: 41872 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  16. CX-012587: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    HB-Line Security Upgrades CX(s) Applied: B1.3Date: 41835 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  17. CX-012583: Categorical Exclusion Determination

    Energy.gov [DOE]

    Biofuels Production Experiment CX(s) Applied: B3.6Date: 41841 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  18. CX-008973: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Petrography Laboratory CX(s) Applied: B3.6 Date: 08/01/2012 Location(s): West Virginia Offices(s): National Energy Technology Laboratory

  19. CX-010367: Categorical Exclusion Determination

    Energy.gov [DOE]

    Asbestos Abatement Actions CX(s) Applied: B1.16 Date: 11/19/2012 Location(s): Tennessee, California, Virginia Offices(s): Berkeley Site Office

  20. CX-009312: Categorical Exclusion Determination

    Energy.gov [DOE]

    Pecan Street Smart Grid Extension Service CX(s) Applied: A9 Date: 08/30/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory

  1. CX-011628: Categorical Exclusion Determination

    Energy.gov [DOE]

    Enclosure Modification Project CX(s) Applied: B1.3 Date: 06/05/2013 Location(s): Tennessee Offices(s): Y-12 Site Office

  2. CX-012580: Categorical Exclusion Determination

    Energy.gov [DOE]

    Tritium Responsive Infrastructure Modifications CX(s) Applied: B1.15Date: 41844 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  3. CX-007793: Categorical Exclusion Determination

    Energy.gov [DOE]

    Jonesboro Maintenance Facility Additions CX(s) Applied: B1.15 Date: 05/10/2011 Location(s): Arkansas Offices(s): Southwestern Power Administration

  4. CX-007798: Categorical Exclusion Determination

    Energy.gov [DOE]

    Springfield Maintenance Garage CX(s) Applied: B1.15 Date: 12/08/2010 Location(s): Missouri Offices(s): Southwestern Power Administration

  5. CX-008729: Categorical Exclusion Determination

    Energy.gov [DOE]

    Reverse Osmosis System Removal CX(s) Applied: B1.26 Date: 06/25/2012 Location(s): Idaho Offices(s): Idaho Operations Office

  6. CX-010768: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    ZIRCEX Nuclear Fuel Dissolution Testing CX(s) Applied: B3.6 Date: 08/12/2013 Location(s): Idaho Offices(s): Nuclear Energy

  7. CX-003164: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Categorical Exclusion Determination CX-003164: Categorical Exclusion Determination Optimization of Biomass Production Across a Landscape CX(s) Applied: A9 Date: 07262010...

  8. CX-011194: Categorical Exclusion Determination

    Energy.gov [DOE]

    Particle Physics Division Outback Garage CX(s) Applied: B1.15 Date: 09/19/2013 Location(s): Illinois Offices(s): Fermi Site Office

  9. CX-012310: Categorical Exclusion Determination

    Energy.gov [DOE]

    Sawmill Creek Stream Bank Erosion CX(s) Applied: B1.3 Date: 06/06/2014 Location(s): Illinois Offices(s): Argonne Site Office

  10. CX-012437: Categorical Exclusion Determination

    Energy.gov [DOE]

    High Energy Density Lithium Battery CX(s) Applied: B3.6Date: 41878 Location(s): New YorkOffices(s): National Energy Technology Laboratory

  11. CX-012028: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    High Temperature Laboratory CX(s) Applied: B3.6 Date: 04/21/2014 Location(s): Oregon Offices(s): National Energy Technology Laboratory

  12. CX-011416: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Technology Integration Program CX(s) Applied: A9, A11 Date: 12/19/2013 Location(s): Ohio Offices(s): National Energy Technology Laboratory

  13. CX-011538: Categorical Exclusion Determination

    Energy.gov [DOE]

    Ninemile Creek Lower Property Funding CX(s) Applied: B1.25 Date: 11/26/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  14. CX-011536: Categorical Exclusion Determination

    Energy.gov [DOE]

    Aeneans Creek Spring Property Funding CX(s) Applied: B1.25 Date: 11/25/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  15. CX-011537: Categorical Exclusion Determination

    Energy.gov [DOE]

    Wanacut Creek Upper Property Funding CX(s) Applied: B1.25 Date: 11/26/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  16. CX-012793: Categorical Exclusion Determination

    Energy.gov [DOE]

    15-Minute Transmission Scheduling CX(s) Applied: B4.4, B4.5Date: 41933 Location(s): WashingtonOffices(s): Bonneville Power Administration

  17. CX-012110: Categorical Exclusion Determination

    Energy.gov [DOE]

    Cowlitz Falls Fish Facility Access Agreement Extension CX(s) Applied: A2 Date: 04/02/2014 Location(s): Washington Offices(s): Bonneville Power Administration

  18. CX-009707: Categorical Exclusion Determination

    Energy.gov [DOE]

    Alcoa Power Sales Contract CX(s) Applied: B4.1 Date: 12/04/2012 Location(s): Oregon, Washington Offices(s): Bonneville Power Administration

  19. CX-009513: Categorical Exclusion Determination

    Energy.gov [DOE]

    Aquatic Invasive Mussels Monitoring CX(s) Applied: B3.1 Date: 10/15/2012 Location(s): CX: none Offices(s): Bonneville Power Administration

  20. CX-013632: Categorical Exclusion Determination

    Energy.gov [DOE]

    Alcoa Power Sales Contract Amendment CX(s) Applied: B4.11Date: 04/23/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  1. CX-008989: Categorical Exclusion Determination

    Energy.gov [DOE]

    State Energy Program CX(s) Applied: A9, A11 Date: 08/27/2012 Location(s): Kansas Offices(s): Golden Field Office

  2. CX-008144: Categorical Exclusion Determination

    Energy.gov [DOE]

    Planned Repair of Flow Lines CX(s) Applied: B5.4 Date: 08/09/2011 Location(s): Wyoming Offices(s): RMOTC

  3. CX-010195: Categorical Exclusion Determination

    Energy.gov [DOE]

    Polymer Synthesis Lab - Modification CX(s) Applied: B3.6 Date: 04/15/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

  4. CX-010241: Categorical Exclusion Determination

    Energy.gov [DOE]

    Hydrogen Pathway Analyses CX(s) Applied: A9 Date: 02/28/2013 Location(s): Virginia Offices(s): Golden Field Office

  5. CX-011564: Categorical Exclusion Determination

    Energy.gov [DOE]

    Excess Facilities Deactivation and Demolition CX(s) Applied: B1.23 Date: 11/05/2013 Location(s): Idaho Offices(s): Idaho Operations Office

  6. CX-012705: Categorical Exclusion Determination

    Energy.gov [DOE]

    Materials and Fuels Complex (MFC)-703 Fire Alarm Replacement CX(s) Applied: B2.2Date: 41858 Location(s): IdahoOffices(s): Nuclear Energy

  7. CX-012725: Categorical Exclusion Determination

    Energy.gov [DOE]

    Materials and Fuel Complex (MFC)-782 Fire Sprinkler Installation CX(s) Applied: B2.2Date: 41829 Location(s): IdahoOffices(s): Nuclear Energy

  8. CX-013825: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Lab A19 Cleanroom Construction CX(s) Applied: B1.31Date: 06/29/2015 Location(s): IdahoOffices(s): Nuclear Energy

  9. CX-012729: Categorical Exclusion Determination

    Energy.gov [DOE]

    Hydrogen Sulfide Scavenger BOA (Multiple) CX(s) Applied: B5.2Date: 41880 Location(s): LouisianaOffices(s): Strategic Petroleum Reserve Field Office

  10. CX-012799: Categorical Exclusion Determination

    Energy.gov [DOE]

    Malin-Hilltop Wood Pole Replacements CX(s) Applied: B1.3Date: 41915 Location(s): CaliforniaOffices(s): Bonneville Power Administration

  11. CX-012805: Categorical Exclusion Determination

    Energy.gov [DOE]

    Brasada-Harney #1 Wood Pole Replacements CX(s) Applied: B1.3Date: 41908 Location(s): OregonOffices(s): Bonneville Power Administration

  12. CX-008724: Categorical Exclusion Determination

    Energy.gov [DOE]

    Rexburg Bus Lot Lease Termination CX(s) Applied: B1.24 Date: 07/05/2012 Location(s): Idaho Offices(s): Idaho Operations Office

  13. CX-014379: Categorical Exclusion Determination

    Energy.gov [DOE]

    Ouagga Mussel Study Funding CX(s) Applied: B3.16Date: 10/29/2015 Location(s): NevadaOffices(s): Bonneville Power Administration

  14. CX-012283: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    USC Autoclave CX(s) Applied: B3.6 Date: 06/14/2014 Location(s): Oregon Offices(s): National Energy Technology Laboratory

  15. CX-013386: Categorical Exclusion Determination

    Energy.gov [DOE]

    Chemical Vapor Deposition CX(s) Applied: B3.6Date: 01/07/2015 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  16. CX-007853: Categorical Exclusion Determination

    Energy.gov [DOE]

    Arizona Rooftop Challenge (ARC) CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): Arizona Offices(s): Golden Field Office

  17. CX-007864: Categorical Exclusion Determination

    Energy.gov [DOE]

    Broward County SOLAR Project CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): Florida Offices(s): Golden Field Office

  18. CX-010514: Categorical Exclusion Determination

    Energy.gov [DOE]

    Center for Nanoscale Energy CX(s) Applied: B3.6 Date: 06/24/2013 Location(s): North Dakota Offices(s): Golden Field Office

  19. CX-014374: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Underwood Tap Structure Relocation CX(s) Applied: B4.13Date: 12/01/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  20. CX-012640: Categorical Exclusion Determination

    Energy.gov [DOE]

    Lexington-Longview #1 Access Road Maintenance CX(s) Applied: B1.3Date: 41865 Location(s): WashingtonOffices(s): Bonneville Power Administration

  1. CX-011065: Categorical Exclusion Determination

    Energy.gov [DOE]

    Midwest Region Alternative Fuels Project CX(s) Applied: A1 Date: 08/29/2013 Location(s): Kansas Offices(s): National Energy Technology Laboratory

  2. CX-011788: Categorical Exclusion Determination

    Energy.gov [DOE]

    I-75 Green Corridor Project CX(s) Applied: A1 Date: 02/10/2014 Location(s): Tennessee Offices(s): National Energy Technology Laboratory

  3. CX-007497: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Clean Energy Coalition - Michigan Green Fleets CX(s) Applied: A1 Date: 12/06/2011 Location(s): Michigan Offices(s): National Energy Technology Laboratory

  4. CX-010938: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Midwest Region Alternative Fuels Project CX(s) Applied: A1 Date: 09/17/2013 Location(s): Kansas, Kansas Offices(s): National Energy Technology Laboratory

  5. CX-011271: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Idaho Petroleum Reduction Leadership Project CX(s) Applied: A1 Date: 09/30/2013 Location(s): Idaho Offices(s): National Energy Technology Laboratory

  6. CX-010756: Categorical Exclusion Determination

    Energy.gov [DOE]

    Solar Utility Network Deployment Acceleration CX(s) Applied: A9, A11 Date: 08/15/2013 Location(s): Virginia Offices(s): Golden Field Office

  7. CX-011102: Categorical Exclusion Determination

    Energy.gov [DOE]

    American Solar Transformation Initiative CX(s) Applied: A11 Date: 08/09/2013 Location(s): California Offices(s): Golden Field Office

  8. CX-013721: Categorical Exclusion Determination

    Energy.gov [DOE]

    Solar Vacuum Furnace CX(s) Applied: B3.6Date: 04/28/2015 Location(s): OregonOffices(s): National Energy Technology Laboratory

  9. CX-013432: Categorical Exclusion Determination

    Energy.gov [DOE]

    Process Demonstration Unit Support Structure CX(s) Applied: B1.15Date: 02/04/2015 Location(s): IdahoOffices(s): Idaho Operations Office

  10. CX-014376: Categorical Exclusion Determination

    Energy.gov [DOE]

    Ross Complex Road Project CX(s) Applied: B1.32Date: 11/12/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  11. CX-014404: Categorical Exclusion Determination

    Energy.gov [DOE]

    Microgrid Research Laboratory Remodel CX(s) Applied: B1.31Date: 11/30/2015 Location(s): IdahoOffices(s): Nuclear Energy

  12. CX-014005: Categorical Exclusion Determination

    Energy.gov [DOE]

    INL Helicopter Training CX(s) Applied: B1.2Date: 07/22/2015 Location(s): IdahoOffices(s): Nuclear Energy

  13. CX-012498: Categorical Exclusion Determination

    Energy.gov [DOE]

    Advanced Light Extraction Structure for OLED Lighting CX(s) Applied: B3.6Date: 41852 Location(s): MarylandOffices(s): National Energy Technology Laboratory

  14. CX-009797: Categorical Exclusion Determination

    Energy.gov [DOE]

    Eni USA Gas Marketing, LLC CX(s) Applied: B5.7 Date: 02/06/2013 Location(s): Louisiana Offices(s): Fossil Energy

  15. CX-013534: Categorical Exclusion Determination

    Energy.gov [DOE]

    ENI USA Gas Marketing, LLC CX(s) Applied: B5.7Date: 04/14/2015 Location(s): Multiple LocationsOffices(s): Fossil Energy

  16. CX-010338: Categorical Exclusion Determination

    Energy.gov [DOE]

    Eugene Substation Fiber Interconnection CX(s) Applied: B4.7 Date: 05/21/2013 Location(s): Oregon Offices(s): Bonneville Power Administration

  17. CX-006681: Categorical Exclusion Determination

    Energy.gov [DOE]

    New Drilling Location in Section 29CX(s) Applied: B3.1Date: 12/23/2009Location(s): Casper, WyomingOffice(s): RMOTC

  18. CX-011634: Categorical Exclusion Determination

    Energy.gov [DOE]

    Closure Turf Installation CX(s) Applied: B6.1 Date: 08/27/2013 Location(s): Texas Offices(s): Pantex Site Office

  19. CX-008700: Categorical Exclusion Determination

    Energy.gov [DOE]

    Natapoc Property Funding CX(s) Applied: B1.25 Date: 06/12/2012 Location(s): Washington Offices(s): Bonneville Power Administration

  20. CX-010091: Categorical Exclusion Determination

    Energy.gov [DOE]

    Power Line Configuration 2013-1 CX(s) Applied: B4.13 Date: 04/15/2012 Location(s): Idaho Offices(s): Nuclear Energy

  1. CX-011642: Categorical Exclusion Determination

    Energy.gov [DOE]

    Pantex Lake Land Utilization CX(s) Applied: B1.11 Date: 11/05/2013 Location(s): Texas Offices(s): Pantex Site Office

  2. CX-013605: Categorical Exclusion Determination

    Energy.gov [DOE]

    Electrochemistry Corrosion Testing CX(s) Applied: B3.6Date: 03/05/2015Location(s): South CarolinaOffices(s): Savannah River Operations Office

  3. CX-012658: Categorical Exclusion Determination

    Energy.gov [DOE]

    Chief Joseph and Custer Substations Security Fence Replacement CX(s) Applied: B1.11Date: 41843 Location(s): WashingtonOffices(s): Bonneville Power Administration

  4. CX-007650: Categorical Exclusion Determination

    Energy.gov [DOE]

    Control Room Consolidation CX(s) Applied: B2.2 Date: 12/29/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office

  5. CX-001856: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Exclusion Determination Rural Cooperative Geothermal Development Electric and Agriculture CX(s) Applied: B3.1 Date: 04282010 Location(s): Paisley, Oregon Office(s): Energy...

  6. CX-010532: Categorical Exclusion Determination

    Energy.gov [DOE]

    Various Demolition Jobs CX(s) Applied: B1.23 Date: 06/07/2013 Location(s): Illinois Offices(s): Fermi Site Office

  7. CX-012317: Categorical Exclusion Determination

    Energy.gov [DOE]

    High Performance Computing Upgrades CX(s) Applied: B1.31 Date: 06/16/2014 Location(s): Idaho Offices(s): Nuclear Energy

  8. CX-012708: Categorical Exclusion Determination

    Energy.gov [DOE]

    Advanced Test Reactor (ATR) Complex Training Trailer CX(s) Applied: B1.15Date: 41844 Location(s): IdahoOffices(s): Nuclear Energy

  9. CX-003608: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CX-003608: Categorical Exclusion Determination Sustainable Algal Energy Production and Environmental Remediation CX(s) Applied: A9, B3.6 Date: 08252010 Location(s): Virginia ...

  10. CX-008926: Categorical Exclusion Determination

    Energy.gov [DOE]

    Texas Alternative Fuel Vehicle Pilot Program CX(s) Applied: A1 Date: 08/24/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory

  11. CX-008545: Categorical Exclusion Determination

    Energy.gov [DOE]

    Solar Energy Evolution and Diffusion Studies CX(s) Applied: A9 Date: 06/19/2012 Location(s): CX: none Offices(s): Golden Field Office

  12. CX-011822: Categorical Exclusion Determination

    Energy.gov [DOE]

    Light Willow Demonstration CX(s) Applied: B3.6 Date: 01/09/2014 Location(s): South Carolina Offices(s): Savannah River Operations Office

  13. Categorical Exclusion Determinations: Golden Field Office | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Categorical Exclusion Determination U.S. Department of Energy Collegiate Entrepreneurship Prize Award Number: TBD FOA CX(s) Applied: A9 Date: 12222014 Location(s): CO...

  14. CX-012656: Categorical Exclusion Determination

    Energy.gov [DOE]

    North Bend Communication Site Engine Generator Replacement CX(s) Applied: B1.3Date: 41848 Location(s): WashingtonOffices(s): Bonneville Power Administration

  15. CX-012278: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Building 36 Use Permit CX(s) Applied: A9 Date: 06/23/2014 Location(s): Oregon Offices(s): National Energy Technology Laboratory

  16. CX-012434: Categorical Exclusion Determination

    Energy.gov [DOE]

    Low Cost Titanium Casting Technology CX(s) Applied: B3.6Date: 41878 Location(s): OhioOffices(s): National Energy Technology Laboratory

  17. CX-010155: Categorical Exclusion Determination

    Energy.gov [DOE]

    Augspurger Radio Tower Replacement Project CX(s) Applied: B1.19 Date: 04/03/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  18. CX-008683: Categorical Exclusion Determination

    Energy.gov [DOE]

    Shaniko Radio Station Replacement Project CX(s) Applied: B1.19 Date: 07/11/2012 Location(s): Oregon Offices(s): Bonneville Power Administration

  19. CX-011190: Categorical Exclusion Determination

    Energy.gov [DOE]

    Alberton Communication Site Construction CX(s) Applied: B1.19 Date: 08/26/2013 Location(s): Montana Offices(s): Bonneville Power Administration

  20. CX-012790: Categorical Exclusion Determination

    Energy.gov [DOE]

    Haystack Butte Radio Site Land Acquisition CX(s) Applied: B1.24Date: 41939 Location(s): WashingtonOffices(s): Bonneville Power Administration

  1. CX-012495: Categorical Exclusion Determination

    Energy.gov [DOE]

    Building 6 Stack Replacement CX(s) Applied: B1.3Date: 41855 Location(s): West VirginiaOffices(s): National Energy Technology Laboratory

  2. CX-012798: Categorical Exclusion Determination

    Energy.gov [DOE]

    Davis Creek Tap Wood Pole Replacements CX(s) Applied: B1.3Date: 41915 Location(s): CaliforniaOffices(s): Bonneville Power Administration

  3. CX-007549: Categorical Exclusion Determination

    Energy.gov [DOE]

    Harrisonville - Waste Water Treatment Plant CX(s) Applied: B5.1 Date: 01/10/2012 Location(s): Missouri Offices(s): Golden Field Office

  4. CX-013332: Categorical Exclusion Determination

    Energy.gov [DOE]

    Magnesium Chloride Testing CX(s) Applied: B3.6Date: 12/15/2014 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  5. CX-007522: Categorical Exclusion Determination

    Energy.gov [DOE]

    Crane Removal Project CX(s) Applied: B1.23 Date: 12/15/2011 Location(s): Tennessee Offices(s): Y-12 Site Office

  6. CX-009028: Categorical Exclusion Determination

    Energy.gov [DOE]

    Wisconsin Biodiesel Blending Program CX(s) Applied: B5.22 Date: 08/22/2012 Location(s): Wisconsin Offices(s): Golden Field Office

  7. CX-008250: Categorical Exclusion Determination

    Energy.gov [DOE]

    Geotechnical Core Drilling for USGS 138 CX(s) Applied: B3.1 Date: 04/18/2012 Location(s): Idaho Offices(s): Nuclear Energy

  8. CX-012632: Categorical Exclusion Determination

    Energy.gov [DOE]

    LURR 20140456 - Salmon Creek Avenue Pathway Project CX(s) Applied: B4.9Date: 41885 Location(s): WashingtonOffices(s): Bonneville Power Administration

  9. CX-011625: Categorical Exclusion Determinationc

    Energy.gov [DOE]

    9103 Second Floor Refurbishment CX(s) Applied: B1.3 Date: 06/05/2013 Location(s): Tennessee Offices(s): Y-12 Site Office

  10. CX-007856: Categorical Exclusion Determination

    Energy.gov [DOE]

    Sacramento Regional Energy Alliance CX(s) Applied: B5.23 Date: 01/27/2012 Location(s): California Offices(s): Golden Field Office

  11. CX-011992: Categorical Exclusion Determination

    Energy.gov [DOE]

    Carib Energy (USA) LLC CX(s) Applied: B5.7 Date: 05/30/2014 Location(s): Nationwide Offices(s): Fossil Energy

  12. CX-012666: Categorical Exclusion Determination

    Energy.gov [DOE]

    Carib Energy (USA) LLC CX(s) Applied: B5.7Date: 05/30//2014 Location(s): FloridaOffices(s): Fossil Energy

  13. CX-010590: Categorical Exclusion Determination

    Energy.gov [DOE]

    Kalispell Shunt Cap Addition Project CX(s) Applied: B4.11 Date: 07/01/2013 Location(s): Montana Offices(s): Bonneville Power Administration

  14. CX-012637: Categorical Exclusion Determination

    Energy.gov [DOE]

    LURR 20140521 - David King - Sewer Line Installation CX(s) Applied: B4.9Date: 41876 Location(s): OregonOffices(s): Bonneville Power Administration

  15. CX-007792: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Gore Substation Safety Lighting CX(s) Applied: B2.3 Date: 09/01/2011 Location(s): Oklahoma Offices(s): Southwestern Power Administration

  16. CX-014375: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Cinder Cones Property Acquisition Funding CX(s) Applied: B1.25Date: 11/23/2015 Location(s): IdahoOffices(s): Bonneville Power Administration

  17. CX-013353: Categorical Exclusion Determination

    Energy.gov [DOE]

    Motor Silencer Installation CX(s) Applied: B1.21Date: 12/02/2014 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  18. CX-013428: Categorical Exclusion Determination

    Energy.gov [DOE]

    Sempra LNG Marketing, LLC CX(s) Applied: B5.7Date: 01/23/2015 Location(s): LouisianaOffices(s): Fossil Energy

  19. CX-013780: Categorical Exclusion Determination

    Energy.gov [DOE]

    Troy Substation Tap Yard Expansion CX(s) Applied: B4.11Date: 07/14/2015 Location(s): MontanaOffices(s): Bonneville Power Administration

  20. CX-009711: Categorical Exclusion Determination

    Energy.gov [DOE]

    Tucannon River Substation Expansion Project CX(s) Applied: B4.6 Date: 11/01/2012 Location(s): Washington Offices(s): Bonneville Power Administration

  1. CX-010148: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Merritt Radio Station Upgrade CX(s) Applied: B1.19 Date: 04/18/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  2. CX-013345: Categorical Exclusion Determination

    Energy.gov [DOE]

    Plant Accumulators Study CX(s) Applied: B3.6Date: 12/08/2014 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  3. CX-012482: Categorical Exclusion Determination

    Energy.gov [DOE]

    Mid-Atlantic Regional Infrastructure Development Project CX(s) Applied: B5.22Date: 41862 Location(s): MarylandOffices(s): National Energy Technology Laboratory

  4. CX-013604: Categorical Exclusion Determination

    Energy.gov [DOE]

    Corrosion Testing CX(s) Applied: B3.6Date: 03/05/2015 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  5. CX-012641: Categorical Exclusion Determination

    Energy.gov [DOE]

    Mossy Rock-Chehalis #1 Access Road Maintenance CX(s) Applied: B1.3Date: 41865 Location(s): WashingtonOffices(s): Bonneville Power Administration

  6. CX-008234: Categorical Exclusion Determination

    Energy.gov [DOE]

    Whole Energy Glycerin Refinery CX(s) Applied: B5.15 Date: 04/20/2012 Location(s): Washington Offices(s): Golden Field Office

  7. CX-009543: Categorical Exclusion Determination

    Energy.gov [DOE]

    Sopogy Subcontract CX(s) Applied: A9, B5.15 Date: 11/28/2012 Location(s): Hawaii Offices(s): Golden Field Office

  8. CX-009753: Categorical Exclusion Determination

    Energy.gov [DOE]

    Propane Corridor Development Program CX(s) Applied: B5.22 Date: 12/06/2012 Location(s): Georgia Offices(s): National Energy Technology Laboratory

  9. CX-011535: Categorical Exclusion Determination

    Energy.gov [DOE]

    East Grangeville Substation Sale CX(s) Applied: B1.24 Date: 11/14/2013 Location(s): Idaho Offices(s): Bonneville Power Administration

  10. CX-012233: Categorical Exclusion Determination

    Energy.gov [DOE]

    Shed Acquisition at Kalispell Substation CX(s) Applied: B1.24 Date: 06/09/2014 Location(s): Montana Offices(s): Bonneville Power Administration

  11. CX-010157: Categorical Exclusion Determination

    Energy.gov [DOE]

    Fairmount Substation Equipment Acquisition CX(s) Applied: B1.24 Date: 03/27/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  12. CX-012570: Categorical Exclusion Determination

    Energy.gov [DOE]

    Install Elevated Fire Water Storage Tank CX(s) Applied: B2.5Date: 41862 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  13. CX-012706: Categorical Exclusion Determination

    Energy.gov [DOE]

    Radiochemistry Laboratory (RCL) Supply Intake Filter Housing CX(s) Applied: B2.5Date: 41858 Location(s): IdahoOffices(s): Nuclear Energy

  14. CX-010113: Categorical Exclusion Determination

    Energy.gov [DOE]

    Compression Stress Relaxometer CX(s) Applied: B3.6 Date: 03/28/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  15. CX-012472: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Technology Integration Program CX(s) Applied: A9, A11, B3.11Date: 41873 Location(s): OhioOffices(s): National Energy Technology Laboratory

  16. CX-012791: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Grizzly Captain Jack Transmission Line Access Road Acquisition CX(s) Applied: B1.24Date: 41935 Location(s): OregonOffices(s): Bonneville Power Administration

  17. CX-012776: Categorical Exclusion Determination

    Energy.gov [DOE]

    Catalyst Processing, KCP14-05 CX(s) Applied: NOT NOTEDDate: 41857 Location(s): MissouriOffices(s): Kansas City Site Office

  18. CX-014616: Categorical Exclusion Determination

    Energy.gov [DOE]

    Biogasification CX(s) Applied: B3.6Date: 01/12/2016 Location(s): West VirginiaOffices(s): National Energy Technology Laboratory

  19. CX-009203: Categorical Exclusion Determination

    Energy.gov [DOE]

    Ross Maintenance Headquarters Project CX(s) Applied: B1.15 Date: 09/19/2012 Location(s): Washington Offices(s): Bonneville Power Administration

  20. CX-011686: Categorical Exclusion Determination

    Energy.gov [DOE]

    Ross Communication Tower Fiber Installation CX(s) Applied: B4.7 Date: 01/15/2014 Location(s): Washington Offices(s): Bonneville Power Administration

  1. CX-009198: Categorical Exclusion Determination

    Energy.gov [DOE]

    Ross Transformer Oil Terminal Upgrade CX(s) Applied: B4.6 Date: 09/24/2012 Location(s): Washington Offices(s): Bonneville Power Administration

  2. CX-012808: Categorical Exclusion Determination

    Energy.gov [DOE]

    LURR 20140504 Ross Substation Comcast Fiber Installation CX(s) Applied: B4.9Date: 41906 Location(s): WashingtonOffices(s): Bonneville Power Administration

  3. CX-007844: Categorical Exclusion Determination

    Energy.gov [DOE]

    Energy Retrofits CX(s) Applied: B5.1 Date: 12/01/2011 Location(s): Rhode Island Offices(s): Energy Efficiency and Renewable Energy

  4. CX-001198: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    98: Categorical Exclusion Determination CX-001198: Categorical Exclusion Determination Recovery Act: 1010 Avenue of the Arts - New School and Performing Arts Theater CX(s) Applied: ...

  5. CX-013565: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    65: Categorical Exclusion Determination CX-013565: Categorical Exclusion Determination Analytical Methods for Radiochemical Measurements CX(s) Applied: B3.6 Date: 04162015 ...

  6. CX-012557: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    557: Categorical Exclusion Determination CX-012557: Categorical Exclusion Determination Electrodepositon of Molybdenum, NickelMolybdenum alloy, Cesium, and Strontium CX(s) Applied: ...

  7. CX-014082: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4082: Categorical Exclusion Determination CX-014082: Categorical Exclusion Determination Understanding Transient Combustion Phenomena in Low-NOx Gas Turbines CX(s) Applied: A9, ...

  8. CX-001199: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    9: Categorical Exclusion Determination CX-001199: Categorical Exclusion Determination Tennessee Energy Efficient Schools Initiative Ground Source Heat Pump Program CX(s) Applied: ...

  9. CX-000703: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    03: Categorical Exclusion Determination CX-000703: Categorical Exclusion Determination Maryland - Clean Energy Economic Development Initiative (CEEDI) CX(s) Applied: A1, A9, A11, ...

  10. CX-010117: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    10117: Categorical Exclusion Determination CX-010117: Categorical Exclusion Determination Analytical Methods for Radiochemical Measurements CX(s) Applied: B3.6 Date: 03282013 ...

  11. CX-004024: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    24: Categorical Exclusion Determination CX-004024: Categorical Exclusion Determination Backside Contact Multijunction Solar Cells for High Concentration Applications CX(s) Applied: ...

  12. CX-007550: Categorical Exclusion Determination

    Energy.gov [DOE]

    Kearney - Waste Water Treatment Plant CX(s) Applied: B5.1 Date: 01/10/2012 Location(s): Missouri Offices(s): Golden Field Office

  13. CX-012788: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Bio-Aviation Fuel LCA with GREET CX(s) Applied: B5.15Date: 41906 Location(s): IllinoisOffices(s): Argonne Site Office

  14. CX-012474: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Refractories/Ceramics Project CX(s) Applied: B3.6Date: 41870 Location(s): OregonOffices(s): National Energy Technology Laboratory

  15. CX-012730: Categorical Exclusion Determination

    Energy.gov [DOE]

    Replace West Hackberry Radio Tower CX(s) Applied: B1.19Date: 41880 Location(s): LouisianaOffices(s): Strategic Petroleum Reserve Field Office

  16. CX-012531: Categorical Exclusion Determination

    Energy.gov [DOE]

    Distributed Wireless Antenna Sensors for Boiler Condition CX(s) Applied: B3.6Date: 41836 Location(s): CaliforniaOffices(s): National Energy Technology Laboratory

  17. CX-013309: Categorical Exclusion Determination

    Energy.gov [DOE]

    Burns Communication Site Upgrade CX(s) Applied: B4.6Date: 01/13/2015 Location(s): OregonOffices(s): Bonneville Power Administration

  18. CX-012539: Categorical Exclusion Determination

    Energy.gov [DOE]

    Distributed Wireless Antenna Sensors for Boiler Condition CX(s) Applied: B3.6Date: 41836 Location(s): TexasOffices(s): National Energy Technology Laboratory

  19. CX-008797: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Coal Pile Basin Project CX(s) Applied: B1.29 Date: 06/04/2012 Location(s): Tennessee Offices(s): Y-12 Site Office

  20. CX-010742: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Integrated Simulation Development and Decision Support CX(s) Applied: A9 Date: 08/15/2013 Location(s): California Offices(s): Golden Field Office

  1. CX-008146: Categorical Exclusion Determination

    Energy.gov [DOE]

    Advanced Formation Evaluator Tools (Haliburton) CX(s) Applied: B3.7 Date: 09/11/2011 Location(s): Wyoming Offices(s): RMOTC

  2. CX-012563: Categorical Exclusion Determination

    Energy.gov [DOE]

    Roof repairs at 735-A CX(s) Applied: B1.3Date: 41870 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  3. CX-011679: Categorical Exclusion Determination

    Energy.gov [DOE]

    Antifoam Degradation Testing CX(s) Applied: B3.6 Date: 12/05/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  4. CX-008556: Categorical Exclusion Determination

    Energy.gov [DOE]

    Haiti Renewable Resource Study CX(s) Applied: A9, A11 Date: 07/23/2012 Location(s): Haiti Offices(s): Golden Field Office

  5. CX-010433: Categorical Exclusion Determination

    Energy.gov [DOE]

    Memaloose Meadows Land Acquisition CX(s) Applied: B1.25 Date: 06/04/2013 Location(s): Oregon Offices(s): Bonneville Power Administration

  6. CX-010426: Categorical Exclusion Determination

    Energy.gov [DOE]

    Vista View Fields Land Acquisition CX(s) Applied: B1.25 Date: 06/19/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  7. CX-008815: Categorical Exclusion Determination

    Energy.gov [DOE]

    Cheniere Marketing, LLC CX(s) Applied: B5.7 Date: 06/01/2012 Location(s): Louisiana Offices(s): Fossil Energy

  8. CX-011993: Categorical Exclusion Determination

    Energy.gov [DOE]

    Cheniere Marketing, LLC CX(s) Applied: B5.7 Date: 06/04/2014 Location(s): Nationwide Offices(s): Fossil Energy

  9. CX-012665: Categorical Exclusion Determination

    Energy.gov [DOE]

    Cheniere Marketing, LLC CX(s) Applied: B5.7Date: 06/04/2014 Location(s): Multiple LocationsOffices(s): Fossil Energy

  10. CX-010437: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Rocky Ridge Radio Station Upgrade CX(s) Applied: B1.19 Date: 05/31/2013 Location(s): Montana Offices(s): Bonneville Power Administration

  11. CX-008251: Categorical Exclusion Determination

    Energy.gov [DOE]

    International Way Office Building Lease Termination CX(s) Applied: B1.24 Date: 03/21/2012 Location(s): Idaho Offices(s): Nuclear Energy

  12. CX-008984: Categorical Exclusion Determination

    Energy.gov [DOE]

    State Energy Program CX(s) Applied: A9, A11 Date: 08/29/2012 Location(s): Florida Offices(s): Golden Field Office

  13. CX-100657 Categorical Exclusion Determination | Department of...

    Energy.gov [DOE] (indexed site)

    CX(s) Applied: A9 Fuel Cell Technologies Office Date: ... Inc. to conduct a cost analysis of multiple ... Project activities include estimation of the physical ...

  14. CX-013417: Categorical Exclusion Determination

    Energy.gov [DOE]

    Trentwood Substation Communication Upgrade CX(s) Applied: B1.19Date: 02/11/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  15. CX-013389: Categorical Exclusion Determination

    Energy.gov [DOE]

    Plutonium Characteristics CX(s) Applied: B3.6Date: 01/07/2015 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  16. CX-013521: Categorical Exclusion Determination

    Energy.gov [DOE]

    Chemical Oxygen Demand CX(s) Applied: B3.6Date: 02/03/2015 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  17. CX-011712: Categorical Exclusion Determination

    Energy.gov [DOE]

    Midwest Region Alternative Fuels Project CX(s) Applied: A1 Date: 01/08/2014 Location(s): Missouri Offices(s): National Energy Technology Laboratory

  18. CX-100160 Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Proposed Rulemaking for Energy Conservation Standards for Residential Dehumidifiers RIN: 1904-AC81 CX(s) Applied: B5.1

  19. CX-009325: Categorical Exclusion Determination

    Energy.gov [DOE]

    Microbiology Laboratory CX(s) Applied: B3.6 Date: 10/01/2012 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

  20. CX-010258: Categorical Exclusion Determination

    Energy.gov [DOE]

    Bangladesh Meteorological Instrumentation Installation CX(s) Applied: A9 Date: 04/26/2013 Location(s): Colorado Offices(s): Golden Field Office