National Library of Energy BETA

Sample records for set top boxes

  1. Satellite Television Industry Meeting Regarding DOE Set-Top Box...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking On April 3, 2012 at 11:00 AM, ...

  2. Ex Parte Memorandum on Set Top Boxes and Network Equipment | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy on Set Top Boxes and Network Equipment Ex Parte Memorandum on Set Top Boxes and Network Equipment This Memorandum for the Record provides a summary of a May 1, 2012, meeting with DOE officials concerning potential test procedures and energy conservation standards for set-top boxes and network equipment. Meeting_of_05_01_2012.pdf (102.67 KB) More Documents & Publications Docket No. EERE-2012-BT-TP-0046 Ex Parte Communication DOE's Proposed Coverage Determination for Set-Top Boxes

  3. U.S. DOE Set-Top Box Proceeding | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    U.S. DOE Set-Top Box Proceeding U.S. DOE Set-Top Box Proceeding AT&T's U-verse® receivers should not be regulated under EPCA. U-verse® receivers are already among the most energy efficient of the major video service providers, and AT&T continues to work to increase their efficiency. DOE_03_07_2012.pdf (824.65 KB) More Documents & Publications Meeting Concerning Potential Test Procedures and Energy Conservation Standards for Set-Top Boxes and Network Equipment Demonstration of

  4. Energy use of set-top boxes and telephony products in the U.S.

    SciTech Connect (OSTI)

    Rosen, Karen B.; Meier, Alan K.; Zandelin, Stefan

    2001-06-01

    The goal of this investigation was to estimate the 1999 energy consumption of set-top boxes and telephony products in the U.S. residential sector. Results of this study will be used to identify new energy conservation opportunities and to align programs with those opportunities. We conducted a bottom-up analysis for set-top boxes and telephony products using our own power measurements and stock and usage estimates from secondary sources. The most common set-top boxes in U.S. homes in 1999 were analog cable boxes, digital cable boxes, wireless receivers, and game consoles. According to these measurements, analog cable boxes and wireless receivers draw between 10 and 15 watts, while digital cable boxes draw between 20 and 25 watts in both the Active and Standby modes. Video games used less than 2 watts in Standby mode, and about 8 watts when Active. We estimate that set-top boxes accounted for 0.7% of residential electricity use in 1999. Our investigation of telephony products included answering machines, cordless phones, cordless phone answering machine combination units, and mobile phone chargers. Answering machines, cordless phones, and combination units use between 2 and 3 watts in both the Active and Standby modes. Mobile phone chargers use about 1 watt in standby. We estimate that these telephony products account for 0.5% of U.S. residential electricity consumption. Together, set-tops and telephony constituted 1.2% of U.S. residential electricity consumption in 1999. Standby power use accounted for about 60% of this energy use. The combined total energy use of the products investigated for this study and those researched previously for this series of reports account for about 6.6% of residential electricity use in the U.S.

  5. DOE Withdraws Proposed Rulemaking (Test Procedure) and Proposed Coverage Determination (Energy Conservation Standard) for Set-Top Boxes

    Energy.gov [DOE]

    The Department of Energy (DOE) has issued pre-publication Federal Register notices withdrawing the notice of proposed rulemaking for a test procedure for set-top boxes and the proposed coverage determination for set-top boxes and network equipment.

  6. DOE's Proposed Coverage Determination for Set-Top Boxes | Department...

    Energy.gov (indexed) [DOE]

    On November 29, 2011, William Check of the National Cable & Telecommunications Association ("NCTA"),1 Paul Glist of the law firm of Davis Wright Tremaine LLP, and I met with Daniel ...

  7. Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking

    Energy.gov [DOE]

    On April 3, 2012 at 11:00 AM, representatives of the U.S. satellite television industry, listed below, met with the DOE officials, listed below, at the Forestall Building to discuss matters of...

  8. Plate forming and break down pizza box

    DOE Patents [OSTI]

    Pantisano, Frank; Devine, Scott M.

    1992-01-01

    A standard corrugated paper pizza box is provided with slit cuts cut through the top panel of the pizza box in a shape to form four circular serving plates with a beveled raised edge and cross slit cuts through the bottom panel of the pizza box separating the box into four essentially equal portions for easy disposal.

  9. Search for the standard model Higgs boson produced in association with top quarks using the full CDF data set

    SciTech Connect (OSTI)

    Aaltonen, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J.A.; Arisawa, T.; Artikov, A.; /Dubna, JINR /Texas A-M

    2012-08-01

    A search is presented for the standard model Higgs boson produced in association with top quarks using the full Run II proton-antiproton collision data set, corresponding to 9.45 fb{sup -1}, collected by the Collider Detector at Fermilab. No significant excess over the expected background is observed, and 95% credibility-level upper bounds are placed on the cross section {sigma}(t{bar t}H {yields} lepton + missing transverse energy + jets). For a Higgs boson mass of 125 GeV/c{sup 2}, we expect to set a limit of 12.6, and observe a limit of 20.5 times the standard model rate. This represents the most sensitive search for a standard model Higgs boson in this channel to date.

  10. Sampling box

    DOE Patents [OSTI]

    Phillips, Terrance D.; Johnson, Craig

    2000-01-01

    An air sampling box that uses a slidable filter tray and a removable filter cartridge to allow for the easy replacement of a filter which catches radioactive particles is disclosed.

  11. Ready, Set... Get Prepped for Monday’s Launch of the ‘America's Next Top Energy Innovator’ Challenge

    Energy.gov [DOE]

    The ‘America's Next Top Energy Innovator’ Challenge will begin on May 2, 2011, and continue through December 15. Entrepreneurs can apply for any of the Department of Energy's 15,000 patents at a greatly reduced cost and with much less paperwork.

  12. Measurement of the top-quark mass in the tt¯ dilepton channel using the full CDF Run II data set

    SciTech Connect (OSTI)

    Aaltonen, T.

    2015-08-06

    We present a measurement of the top-quark mass in events containing two leptons (electrons or muons) with a large transverse momentum, two or more energetic jets, and a transverse-momentum imbalance. We use the full proton-antiproton collision data set collected by the CDF experiment during the Fermilab Tevatron Run II at center-of-mass energy √s = 1.96 TeV, corresponding to an integrated luminosity of 9.1 fb–1. A special observable is exploited for an optimal reduction of the dominant systematic uncertainty, associated with the knowledge of the absolute energy of the hadronic jets. The distribution of this observable in the selected events is compared to simulated distributions of tt¯ dilepton signal and background. We measure a value for the top-quark mass of 171.5±1.9 (stat)±2.5 (syst) GeV/c2.

  13. Box Integrals

    SciTech Connect (OSTI)

    Bailey, David H.; Borwein, Jonathan M.; Crandall, Richard E.

    2006-06-01

    By a "box integral" we mean here an expectation $\\langle|\\vec r - \\vec q|^s \\rangle$ where $\\vec r$runs over the unit $n$-cube,with $\\vec q$ and $s$ fixed, explicitly:\\begin eqnarray*&&\\int_01 \\cdots \\int_01 \\left((r_1 - q_1)2 + \\dots+(r_n-q_n)2\\right)^ s/2 \\ dr_1 \\cdots dr_n.\\end eqnarray* The study ofbox integrals leads one naturally into several disparate fields ofanalysis. While previous studies have focused upon symbolic evaluationand asymptotic analysis of special cases (notably $s = 1$), we workherein more generally--in interdisciplinary fashion--developing resultssuch as: (1) analytic continuation (in complex $s$), (2) relevantcombinatorial identities, (3) rapidly converging series, (4) statisticalinferences, (5) connections to mathematical physics, and (6)extreme-precision quadrature techniques appropriate for these integrals.These intuitions and results open up avenues of experimental mathematics,with a view to new conjectures and theorems on integrals of thistype.

  14. Measurement of the forward-backward asymmetry of top-quark and antiquark pairs using the full CDF Run II data set

    DOE PAGES-Beta [OSTI]

    Aaltonen, Timo Antero

    2016-06-03

    In this study, we measure the forward--backward asymmetry of the production of top quark and antiquark pairs in proton-antiproton collisions at center-of-mass energymore » $$\\sqrt{s} = 1.96~\\mathrm{TeV}$$ using the full data set collected by the Collider Detector at Fermilab (CDF) in Tevatron Run II corresponding to an integrated luminosity of $$9.1~\\rm{fb}^{-1}$$. The asymmetry is characterized by the rapidity difference between top quarks and antiquarks ($$\\Delta y$$), and measured in the final state with two charged leptons (electrons and muons). The inclusive asymmetry, corrected to the entire phase space at parton level, is measured to be $$A_{\\text{FB}}^{t\\bar{t}} = 0.12 \\pm 0.13$$, consistent with the expectations from the standard-model (SM) and previous CDF results in the final state with a single charged lepton. The combination of the CDF measurements of the inclusive $$A_{\\text{FB}}^{t\\bar{t}}$$ in both final states yields $$A_{\\text{FB}}^{t\\bar{t}}=0.160\\pm0.045$$, which is consistent with the SM predictions. We also measure the differential asymmetry as a function of $$\\Delta y$$. A linear fit to $$A_{\\text{FB}}^{t\\bar{t}}(|\\Delta y|)$$, assuming zero asymmetry at $$\\Delta y=0$$, yields a slope of $$\\alpha=0.14\\pm0.15$$, consistent with the SM prediction and the previous CDF determination in the final state with a single charged lepton. The combined slope of $$A_{\\text{FB}}^{t\\bar{t}}(|\\Delta y|)$$ in the two final states is $$\\alpha=0.227\\pm0.057$$, which is $$2.0\\sigma$$ larger than the SM prediction.« less

  15. Hydro-Balanced Stuffing Box field test

    SciTech Connect (OSTI)

    Giangiacomo, L.A.

    1999-05-28

    The Hydro-Balanced Stuffing Box is a seal assembly for polished rod pumping installations commonly used in oil and gas pumping well installations to contain produced well fluids. The improved stuffing box was developed and patented by Harold H. Palmour of The Palmour Group of Livingston, TX. The stuffing box is designed to reduce the incidence of seal leakage and to utilize an environmentally safe fluid, so that if there is any leakage, environmental damage is reduced or eliminated. The unit was tested on two wells at the Rocky Mountain Oilfield Testing Center. During the test period, the performance of the stuffing box was measured by monitoring the pressure on the tubing and the inner chamber with a Barton Two-pen recorder. The amount of safe fluid consumed, fluid leakage at the top of the stuffing box, pressure supplied from the nitrogen bottle, ambient temperature, and polish rod temperature was recorded. The stuffing box is capable of providing a better seal between well fluids an d the environment than conventional stuffing boxes. It allows the polished rod to operate cooler and with lubrication, extending the life of the packing elements, and reducing the amount of attention required to prevent leakage.

  16. Emergency Management - Equipment Boxes

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Emergency Equipment Boxes Boxes filled with emergency equipment are positioned in four locations on site. The equipment in the boxes is for use when responding to or preventing a life-threatening or environmental emergency. A box may be moved to wherever it is needed. The normal locations and custodians of the boxes are: Building 85 (MCC) in the control room - MCC Safety Warden Building 90 (EEL) near the west wall in the high bay - Bert Manzlak - x7556 Building 58 (Test Lab) outside room 1137 -

  17. GLOVE BOX ATTACHMENT

    DOE Patents [OSTI]

    Butts, H.L.

    1962-02-13

    This invention comprises a housing unit to be fitted between a glove box port and a glove so that a slidable plate within the housing seals off the glove box port for evacuation of the glove box without damage to the glove. The housing and the glove may be evacuated without damage to the glove since movement of the glove is restricted during evacuation by the slidable plate. (AEC)

  18. BoxLib

    Energy Science and Technology Software Center (OSTI)

    2000-10-01

    BoxLib is a C++ foundation library used to aid in constructing parallel grid based Partial Differential Equation (PDE) solvers, particularly for Adaptive Mesh Refinement (AMR) applications.

  19. Top Science of 2013

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Department of Energy Top EM Leadership to Participate in 2016 National Cleanup Workshop Top EM Leadership to Participate in 2016 National Cleanup Workshop March 9, 2016 - 12:00pm Addthis Top EM Leadership to Participate in 2016 National Cleanup Workshop WASHINGTON, D.C. - EM's senior leaders are set to join the 2016 National Cleanup Workshop in mid-September in the Washington, D.C.-area. The nuclear cleanup program's leaders scheduled to take part in the workshop include Assistant Secretary

  20. Glove box shield

    DOE Patents [OSTI]

    Brackenbush, L.W.; Hoenes, G.R.

    A shield for a glove box housing radioactive material is comprised of spaced apart clamping members which maintain three overlapping flaps in place therebetween. There is a central flap and two side flaps, the side flaps overlapping at the interior edges thereof and the central flap extending past the intersection of the side flaps in order to insure that the shield is always closed when the user wthdraws his hand from the glove box. Lead loaded neoprene rubber is the preferred material for the three flaps, the extent of lead loading depending upon the radiation levels within the glove box.

  1. Glove box shield

    DOE Patents [OSTI]

    Brackenbush, Larry W.; Hoenes, Glenn R.

    1981-01-01

    According to the present invention, a shield for a glove box housing radioactive material is comprised of spaced apart clamping members which maintain three overlapping flaps in place therebetween. There is a central flap and two side flaps, the side flaps overlapping at the interior edges thereof and the central flap extending past the intersection of the side flaps in order to insure that the shield is always closed when the user withdraws his hand from the glove box. Lead loaded neoprene rubber is the preferred material for the three flaps, the extent of lead loading depending upon the radiation levels within the glove box.

  2. Automatic box loader

    DOE Patents [OSTI]

    Eldridge, Harry H.; Jones, Robert A.; Lindner, Gordon M.; Hight, Paul H.

    1976-01-01

    This invention relates to a system for repetitively forming an assembly consisting of a single layer of tubes and a row of ferromagnetic armatures underlying the same, electromagnetically conveying the resulting assembly to a position overlying a storage box, and depositing the assembly in the box. The system includes means for simultaneously depositing a row of the armatures on the inclined surface of a tube retainer. Tubes then are rolled down the surface to form a single tube layer bridging the armatures. A magnet assembly carrying electromagnets respectively aligned with the armatures is advanced close to the tube layer, and in the course of this advance is angularly displaced to bring the pole pieces of the electromagnets into parallelism with the tube layer. The magnets then are energized to pick up the assembly. The loaded magnet assembly is retracted to a position overlying the box, and during this retraction is again displaced to bring the pole pieces of the electromagnets into a horizontal plane. Means are provided for inserting the loaded electromagnets in the box and then de-energizing the electromagnets to deposit the assembly therein. The system accomplishes the boxing of fragile tubes at relatively high rates. Because the tubes are boxed as separated uniform layers, subsequent unloading operations are facilitated.

  3. Top physics results from CDF

    SciTech Connect (OSTI)

    Gomez, Gervasio; /Cantabria Inst. of Phys.

    2005-05-01

    The top quark is by far the most massive fundamental particle observed so far, and the study of its properties is interesting for several reasons ranging from its possible special role in electroweak symmetry breaking to its sensitivity to physics beyond the Standard Model. They present recent top physics results from CDF based on 160-320 pb{sup -1} of p{bar p} collision data at {radical}s = 1.96 TeV. The t{bar t} cross section and the top mass have been measured in different decay channels and using different methods. they have searched for evidence of single top production, setting upper limits on its production rate. Other results shown in this conference include studies of the polarization of W bosons from top decays, a search for charged Higgs decaying from top, and a search for additional heavy t' quarks.

  4. Profiles in garbage: Corrugated boxes

    SciTech Connect (OSTI)

    Miller, C.

    1997-12-01

    Corrugated boxes (also known as old corrugated containers, or OCC) are used to ship products to factories, warehouses, retail stores, offices, and homes. The primary market for OCC is the paperboard industry, which uses OCC for corrugated medium, linerboard, recycled paperboard, and other paper products. In addition, 2.6 million tons of OCC were exported in 1996. OCC provided 37% of the scrap paper that was exported in 1996. Some corrugated boxes can be reused before recycling. Corrugated boxes are easily and highly recyclable. Large producers such as grocery store warehouses and factories have recycled their corrugated boxes for some time. If shredded properly, uncoated corrugated boxes are easily compostable.

  5. Projection optics box

    DOE Patents [OSTI]

    Hale, Layton C.; Malsbury, Terry; Hudyma, Russell M.; Parker, John M.

    2000-01-01

    A projection optics box or assembly for use in an optical assembly, such as in an extreme ultraviolet lithography (EUVL) system using 10-14 nm soft x-ray photons. The projection optics box utilizes a plurality of highly reflective optics or mirrors, each mounted on a precision actuator, and which reflects an optical image, such as from a mask, in the EUVL system onto a point of use, such as a target or silicon wafer, the mask, for example, receiving an optical signal from a source assembly, such as a developed from laser system, via a series of highly reflective mirrors of the EUVL system. The plurality of highly reflective optics or mirrors are mounted in a housing assembly comprised of a series of bulkheads having wall members secured together to form a unit construction of maximum rigidity. Due to the precision actuators, the mirrors must be positioned precisely and remotely in tip, tilt, and piston (three degrees of freedom), while also providing exact constraint.

  6. Impedance Measurement Box

    ScienceCinema (OSTI)

    Christophersen, Jon

    2016-07-12

    Energy storage devices, primarily batteries, are now more important to consumers, industries and the military. With increasing technical complexity and higher user expectations, there is also a demand for highly accurate state-of-health battery assessment techniques. IMB incorporates patented, proprietary, and tested capabilities using control software and hardware that can be part of an embedded monitoring system. IMB directly measures the wideband impedance spectrum in seconds during battery operation with no significant impact on service life. It also can be applied to batteries prior to installation, confirming health before entering active service, as well as during regular maintenance. For more information about this project, visit http://www.inl.gov/rd100/2011/impedance-measurement-box/

  7. PMT BOX TUFTS - Sheet1

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    REV 1 2 3 4 A B B A 4 3 2 1 APPRV DATE REV DESCRIPTION REVISIONS ZONE FILE: PMT BOX TUFTS PMT BOX ASS'Y 2:1 11 13 RSF RSF RSF - - - - - - - INITIAL ISSUE - - WEIGHT: 0.077...

  8. PMT BOX TUFTS - Sheet1

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    REV 1 2 3 4 A B B A 4 3 2 1 APPRV DATE REV DESCRIPTION REVISIONS ZONE FILE: PMT BOX TUFTS PMT BOX ASS'Y 2:1 10 13 RSF RSF RSF - - - - - - - INITIAL ISSUE - - WEIGHT: 0.254...

  9. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-07-01

    This seventeenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period August 1, 1991 to October 31, 1991. Manufacturing of the prototypical combustor pressure shell has been completed including leak, proof, and assembly fit checking. Manufacturing of forty-five cooling panels was also completed including leak, proof, and flow testing. All precombustor internal components (combustion can baffle and swirl box) were received and checked, and integration of the components was initiated. A decision was made regarding the primary and backup designs for the 1A4 channel. The assembly of the channel related prototypical hardware continued. The cathode wall electrical wiring is now complete. The mechanical design of the diffuser has been completed.

  10. Top physics at CDF

    SciTech Connect (OSTI)

    Julia Thom

    2004-06-24

    Precision studies of top quark properties are a primary goal of the Run II physics program at the Fermilab Tevatron. Marking the first stages of this program, the CDF collaboration presents recent results on top pair production cross section, single top physics and top mass, using between 109 and 200 pb{sup -1} of Run II data.

  11. Aluminum alloys for satellite boxes : engineering guidelines...

    Office of Scientific and Technical Information (OSTI)

    Aluminum alloys for satellite boxes : engineering guidelines for obtaining adequate ... Title: Aluminum alloys for satellite boxes : engineering guidelines for obtaining adequate ...

  12. Top Innovations 2012

    Energy.gov [DOE]

    On this page, you will find Building America's Top Innovations from 1995 through 2012, with links to a profile describing each innovation. Note that some categories may not have a top innovation...

  13. Top NAICS Codes

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Business opportunities » Top NAICS Codes Top NAICS Codes Below is a current listing of the top NAICS codes by volume and dollar value Contact Small Business Office 505-667-4419 Email Top Ten NAICS Codes Volume 339999 All Other Miscellaneous Manufacturing 339940 Office Supplies (except Paper) Manufacturing 339113 Surgical Appliance and Supplies Manufacturing 334118 Computer Terminal and Other Computer Peripheral Equipment Manufacturing 334220 Radio and Television Broadcasting and Wireless

  14. CDF Top Physics

    DOE R&D Accomplishments [OSTI]

    Tartarelli, G. F.; CDF Collaboration

    1996-05-01

    The authors present the latest results about top physics obtained by the CDF experiment at the Fermilab Tevatron collider. The data sample used for these analysis (about 110 pb{sup{minus}1}) represents almost the entire statistics collected by CDF during four years (1992--95) of data taking. This large data size has allowed detailed studies of top production and decay properties. The results discussed here include the determination of the top quark mass, the measurement of the production cross section, the study of the kinematics of the top events and a look at top decays.

  15. NETL's JIC in a box

    ScienceCinema (OSTI)

    David Anna

    2016-07-12

    The National Energy Technology Laboratory developed the idea of a portable joint information center AKA JIC in-a-box. This video discribes some of the equipment in the portable JIC as well as some of the methodology that NETL developed as a result of this portable JIC concept.

  16. Top Physics at CDF

    SciTech Connect (OSTI)

    Moon, Chang-Seong

    2011-06-01

    We present the recent results of top-quark physics using up to 6 fb{sup -1} of p{bar p} collisions at a center of mass energy of {radical}s = 1.96 TeV analyzed by the CDF collaboration. Thanks to this large data sample, precision top quark measurements are now a reality at the Tevatron. Further, several new physics signals could appear in this large dataset. We will present the latest measurements of top quark intrinsic properties as well as direct searches for new physics in the top sector.

  17. Top Science of 2013

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Liquid-scanning technology boosts airport security science-innovationassetsimagesicon-science.jpg Top Science of 2013 Our strong interdisciplinary teaming and unique research...

  18. Building America Top Innovations 2013 Profile - Building America...

    Energy Savers

    Building America Top Innovations 2013 Profile - Building America Solution Center PNNL set up the framework for the Building America Solution Center, a web tool connecting users to ...

  19. Integrated Box Interrogation System (IBIS) Preliminary Design Study

    SciTech Connect (OSTI)

    DR. Stephen Croft; Mr. David Martancik; Dr. Brian Young; Dr. Patrick MJ Chard; Dr. Robert J Estop; Sheila Melton; Gaetano J. Arnone

    2003-01-13

    Canberra Industries has won the tendered solicitation, INEEL/EST-99-00121 for boxed waste Nondestructive Assay Development and Demonstration. Canberra will provide the Integrated Box Interrogation System (IBIS) which is a suite of assay instrumentation and a data reduction system that addresses the measurement needs for Boxed Wastes identified in the solicitation and facilitates the associated experimental program and demonstration of system capability. The IBIS system will consist of the next generation CWAM system, i.e. CWAM II, which is a Scanning Passive/Active Neutron interrogation system which we will call a Box Segmented Neutron Scanner (BSNS), combined with a physically separate Box Segmented Gamma-ray Scanning (BSGS) system. These systems are based on existing hardware designs but will be tailored to the large sample size and enhanced to allow the program to evaluate the following measurement criteria:Characterization and correction for matrix heterogeneity Characterization of non-uniform radio-nuclide and isotopic compositions Assay of high density matrices (both high-Z and high moderator contents)Correction for radioactive material physical form - such as self shielding or multiplication effects due to large accumulations of radioactive materials.Calibration with a minimal set of reference standards and representative matrices.THis document summarizes the conceptual design parameters of the IBIS and indicates areas key to the success of the project where development is to be centered. The work presented here is a collaborative effort between scientific staff within Canberra and within the NIS-6 group at LANL.

  20. Glove box for water pit applications

    DOE Patents [OSTI]

    Mills, William C.; Rabe, Richard A.

    2005-01-18

    A glove box assembly that includes a glove box enclosure attached to a longitudinally extending hollow tube having an entranceway, wherein the portion of the tube is in a liquid environment. An elevator member is provided for raising an object that is introduced into the hollow tube from the liquid environment to a gas environment inside the glove box enclosure while maintaining total containment.

  1. Illumination box and camera system

    DOE Patents [OSTI]

    Haas, Jeffrey S.; Kelly, Fredrick R.; Bushman, John F.; Wiefel, Michael H.; Jensen, Wayne A.; Klunder, Gregory L.

    2002-01-01

    A hand portable, field-deployable thin-layer chromatography (TLC) unit and a hand portable, battery-operated unit for development, illumination, and data acquisition of the TLC plates contain many miniaturized features that permit a large number of samples to be processed efficiently. The TLC unit includes a solvent tank, a holder for TLC plates, and a variety of tool chambers for storing TLC plates, solvent, and pipettes. After processing in the TLC unit, a TLC plate is positioned in a collapsible illumination box, where the box and a CCD camera are optically aligned for optimal pixel resolution of the CCD images of the TLC plate. The TLC system includes an improved development chamber for chemical development of TLC plates that prevents solvent overflow.

  2. Pre-Amp Box Platform Analysis

    SciTech Connect (OSTI)

    Kirby, K.; Kurita, C.; /Fermilab

    1989-01-17

    A platform to be used for the installation and repair of the high voltage pre-amp boxes on the CC cryostat has been designed to support a uniform load of 30 Ibs./sq. ft. However, according to the standards set by both the American National Standard and the Uniform Building Code, the minimum uniformly distributed design load for a structure used as an 'elevated platform or walkway' is 60 lbs./sq. ft. The existing platform was tested with a uniform load of 40 lbs./sq. ft. with no major problems occurring during the testing. Considering a 40 lbs./sq. ft. load to be the minimum acceptable value for 'residential' use, and the platform in hand to be better categorized as an 'elevated platform or walkway', the platform is carefully re-analyzed for a 60 lbs./sq. ft. uniformly distributed load.

  3. Top quark mass measurements

    SciTech Connect (OSTI)

    Hill, Christopher S.; /UC, Santa Barbara

    2004-12-01

    The top quark, with its extraordinarily large mass (nearly that of a gold atom), plays a significant role in the phenomenology of EWSB in the Standard Model. In particular, the top quark mass when combined with the W mass constrains the mass of the as yet unobserved Higgs boson. Thus, a precise determination of the mass of the top quark is a principal goal of the CDF and D0 experiments. With the data collected thus far in Runs 1 and 2 of the Tevatron, CDF and D0 have measured the top quark mass in both the lepton+jets and dilepton decay channels using a variety of complementary experimental techniques. The author presents an overview of the most recent of the measurements.

  4. Top physics: CDF results

    SciTech Connect (OSTI)

    K. Bloom

    2004-06-23

    The top quark plays an important role in the grand scheme of particle physics, and is also interesting on its own merits. We present recent results from CDF on top-quark physics based on 100-200 pb{sup -1} of p{bar p} collision data. We have measured the t{bar t} cross section in different decay modes using several different techniques, and are beginning our studies of top-quark properties. New analyses for this conference include a measurement of {sigma}{sub t{bar t}} in the lepton-plus-jets channel using a neural net to distinguish signal and background events, and measurements of top-quark branching fractions.

  5. Single Top Quark

    SciTech Connect (OSTI)

    Heidi Schellman and Ann Heinson

    2009-03-12

    Fermilab researchers Heidi Schellman and Ann Heinson take a whimsical look at the recent announcement of the discovery of the single top quark, by Fermilab's CDF and DZero experiments.

  6. Top Science of 2013

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Roadrunner firsts pave way for greener, faster supercomputing Top Science of 2013 Our strong interdisciplinary teaming and unique research facilities allow us to develop solutions to complex problems, and to support partners and collaborators, all with the goal of strengthening national security and making a safer world. Roadrunner firsts pave way for more powerful supercomputing placeholder Roadrunner hit the petaflop barrier a few years ago, topping supercomputer lists for years for its power

  7. Top Quark Physics at the Tevatron

    SciTech Connect (OSTI)

    Jung, Andreas W.

    2015-05-21

    An overview of recent top quark measurements using the full Run II data set of CDF or D0 at the Tevatron is presented. Results are complementary to the ones at the LHC. Recent measurements of the production cross section of top quarks in strong and electroweak production and of top quark production asymmetries are presented. The latter includes the measurement of the tt-bar production asymmetry by D0 in the dilepton decay channel. Within their uncertainties the results from all these measurements agree with their respective Standard Model expectation. Finally latest updates on measurements of the top quark mass are discussed, which at the time of the conference are the most precise determinations.

  8. BoxLib Case Study

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    310 2.312 2.313 2.312 2.310 2.288 2003-2016 All Grades - Reformulated Areas 2.310 2.312 2.313 2.312 2.310 2.288 2003-2016 Regular 2.210 2.208 2.205 2.203 2.198 2.171 2003-2016 Reformulated Areas 2.210 2.208 2.205 2.203 2.198 2.171 2003-2016 Midgrade 2.424 2.434 2.452 2.450 2.451 2.440 2003-2016 Reformulated Areas 2.424 2.434 2.452 2.450 2.451 2.440 2003-2016 Premium 2.639 2.654 2.660 2.665 2.668 2.659 2003-2016 Reformulated Areas 2.639 2.654 2.660 2.665 2.668 2.659

    BoxLib Case Study BoxLib

  9. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    The overall objective of the project is to design and construct prototypical hardware for an integrated MHD topping cycle, and conduct long duration proof-of-concept tests of integrated system at the US DOE Component Development and Integration Facility in Butte, Montana. The results of the long duration tests will augment the existing engineering design data base on MHD power train reliability, availability, maintainability, and performance, and will serve as a basis for scaling up the topping cycle design to the next level of development, an early commercial scale power plant retrofit. The components of the MHD power train to be designed, fabricated, and tested include: A slagging coal combustor with a rated capacity of 50 MW thermal input, capable of operation with an Eastern (Illinois {number sign}6) or Western (Montana Rosebud) coal, a segmented supersonic nozzle, a supersonic MHD channel capable of generating at least 1.5 MW of electrical power, a segmented supersonic diffuser section to interface the channel with existing facility quench and exhaust systems, a complete set of current control circuits for local diagonal current control along the channel, and a set of current consolidation circuits to interface the channel with the existing facility inverter.

  10. Interchangeable breech lock for glove boxes

    DOE Patents [OSTI]

    Lemonds, David Preston

    2015-11-24

    A breech lock for a glove box is provided that may be used to transfer one or more items into the glove box. The breech lock can be interchangeably installed in place of a plug, glove, or other device in a port or opening of a glove box. Features are provided to aid the removal of items from the breech lock by a gloved operator. The breech lock can be reused or, if needed, can be replaced with a plug, glove, or other device at the port or opening of the glove box.

  11. A novel advanced box-type solar cooker

    SciTech Connect (OSTI)

    Grupp, M.; Montagne, P.; Wackernagel, M. )

    1991-01-01

    An advanced version of the box-type solar cooker is presented: a fixed cooking vessel in good thermal contact with a conductive absorber plate is set into the glazing; the results are improved thermal performance, easier access to the cooking vessel and less frequent maintenance due to protection of all absorbing and reflecting surfaces. Outdoor tests show that 5 liters of water per sq m of opening surface can be brought to full boiling in less than one hour. A finite element simulation model of the advanced box cooker is presented. It is shown that the most decisive parameters are absorber-to-pot heat transfer and absorber conductivity. Field tests in Ethiopia and India are under way, local production in India has started.

  12. PAGE Cover: Top Photo

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PAGE Cover: Top Photo Energy Sciences Building. Elevation of the recently completed Energy Sciences Building (ESB) project at Argonne National Laboratory in Lemont, Illinois. The ESB was a capital line-item project funded by the Science Laboratories Infrastructure program at a total cost of $96 million and was completed on August 6, 2014. The ESB project provided 173,000 gross square feet of interdisciplinary research and collaborative space to accommodate a range of physical sciences research

  13. Top Science of 2013

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ChemCam to see if Mars can support life, manned missions Top Science of 2013 Our strong interdisciplinary teaming and unique research facilities allow us to develop solutions to complex problems, and to support partners and collaborators, all with the goal of strengthening national security and making a safer world. ChemCam inpsects Mars: can it support life? placeholder ChemChem's instrumentation aboard the Mars Science Lab's rover Curiosity has made all sorts of discoveries. ChemCam found

  14. Top Science of 2013

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Liquid-scanning technology boosts airport security Top Science of 2013 Our strong interdisciplinary teaming and unique research facilities allow us to develop solutions to complex problems, and to support partners and collaborators, all with the goal of strengthening national security and making a safer world. Liquid-scanning technology boosts airport security placeholder Uniquely combining Magnetic Resonance Imaging (MRI) and X-ray technology, scientists unlocked new threat technology that

  15. Top Science of 2013

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    RAPTOR telescope witnesses black hole birth Top Science of 2013 Our strong interdisciplinary teaming and unique research facilities allow us to develop solutions to complex problems, and to support partners and collaborators, all with the goal of strengthening national security and making a safer world. RAPTOR telescope witnesses black hole birth placeholder The first "thinking telescope" RAPTOR found the birth of big black holes, possibly the most powerful events since the big bang.

  16. Top Science of 2013

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Space probes predict hazards to protect spacecraft Top Science of 2013 Our strong interdisciplinary teaming and unique research facilities allow us to develop solutions to complex problems, and to support partners and collaborators, all with the goal of strengthening national security and making a safer world. Space probes predict hazards to protect spacecraft placeholder Researchers think they've solved a 50-year-old space mystery about how electrons within the Van Allen radiation belts that

  17. Transuranic and Low-Level Boxed Waste Form Nondestructive Assay Technology Overview and Assessment

    SciTech Connect (OSTI)

    G. Becker; M. Connolly; M. McIlwain

    1999-02-01

    The Mixed Waste Focus Area (MWFA) identified the need to perform an assessment of the functionality and performance of existing nondestructive assay (NDA) techniques relative to the low-level and transuranic waste inventory packaged in large-volume box-type containers. The primary objectives of this assessment were to: (1) determine the capability of existing boxed waste form NDA technology to comply with applicable waste radiological characterization requirements, (2) determine deficiencies associated with existing boxed waste assay technology implementation strategies, and (3) recommend a path forward for future technology development activities, if required. Based on this assessment, it is recommended that a boxed waste NDA development and demonstration project that expands the existing boxed waste NDA capability to accommodate the indicated deficiency set be implemented. To ensure that technology will be commercially available in a timely fashion, it is recommended this development and demonstration project be directed to the private sector. It is further recommended that the box NDA technology be of an innovative design incorporating sufficient NDA modalities, e.g., passive neutron, gamma, etc., to address the majority of the boxed waste inventory. The overall design should be modular such that subsets of the overall NDA system can be combined in optimal configurations tailored to differing waste types.

  18. Widget:ExpandableBoxStart | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    will be collapsed upon page load and can be expanded by clicking anywhere on the box. Once expanded, the box can be collapsed by clicking anywhere on the box header (the original...

  19. Widget:ExpandableBoxEnd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    will be collapsed upon page load and can be expanded by clicking anywhere on the box. Once expanded, the box can be collapsed by clicking anywhere on the box header (the original...

  20. Box Canyon Motel Space Heating Low Temperature Geothermal Facility...

    Open Energy Information (Open El) [EERE & EIA]

    Canyon Motel Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Box Canyon Motel Space Heating Low Temperature Geothermal Facility Facility Box...

  1. Mechanical Analysis of the Fuel Assembly Box of a HPLWR Fuel Assembly

    SciTech Connect (OSTI)

    Himmel, Steffen; Starflinger, Joerg; Schulenberg, Thomas; Hofmeister, Jan

    2006-07-01

    The aim of the work presented in this paper is to demonstrate that the assembly box of the fuel assembly for a HPLWR proposed by Hofmeister et al. will remain mechanically within the design limits. The commercial finite element code ANSYS has been used to investigate the deformation behaviour caused by thermal convective and pressure boundary conditions provided by the results from Waata et al. for the fuel assembly. The results of these ANSYS analyses show a bending of the assembly box caused by the applied temperature and pressure distribution which, however, is still within the geometrical allowances. The maximum bending of the 4.35 m long assembly box appears close to the mid section, i.e. at 2.45 m axial height, and amounts to about 2 mm, only. The maximum indentation is mainly caused by the pressure difference across the box wall and occurs near the top of the assembly. The indentation at this point can be evaluated to be around 0.2 mm. Both bending and indentation will influence the coolant mass flux and the moderator distribution, and thus needs to be considered for predictions of the power profile and of the coolant heat-up. They are not considered to be critical as long as these deformations are small compared with the nominal gap width of 1 mm between box wall and claddings and 10 mm between adjacent assembly boxes. A second analysis has been performed to study the effect on non-symmetric coolant temperature profiles. A coolant temperature increase by 30 deg. C on one side of the box increased the thermal bending to 4 mm, indicating the sensitivity of this design with respect to temperature non-uniformities. (authors)

  2. Top Ten Innovations of 2013

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Top Ten Innovations of 2013 Our featurres embrace complex issues around our science, technologies, and mission in a series of mini-articles that provide a context for our historical approach, current problem solving and our vision for the future. Faces of Science 70 Years of Innovations 50 Years of Space LANL Top Science 2014 Top Ten Innovations of 2013 Energy Sustainability Radical Supercomputing Science Digests TOP INNOVATIONS OF 2013 Science and technology for a secure nation Impenetrable

  3. Recent Results on Top-Quark Physics at D0

    SciTech Connect (OSTI)

    Bloom, Kenneth

    2015-10-23

    We present the most recent measurements on top-quark physics obtained with Tevatron $p\\bar{p}$ collisions recorded by the D0 experiment at $\\sqrt{s}= 1.96$ TeV. The full Run II data set of 9.7 fb$^{-1}$ is analyzed. Both lepton+jets and dilepton channels of top-quark pair production are used to measure the differential and inclusive cross sections, the forward-backward asymmetries, the top-quark mass, the spin correlations, and the top-quark polarization.

  4. Top physics results at CDF

    SciTech Connect (OSTI)

    Vickey, Trevor; /Illinois U., Urbana

    2005-05-01

    The most recent results on top quark physics at CDF are reported. Measurements of cross-section and mass are presented, and the status of single top quark production searches are discussed. The results obtained from probing various top quark properties are also presented.

  5. 70004 PMT BOX TUFTS - Sheet1

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    06810220 MSC - 8 PMT BOX, TUFTS UNIVERSITY 1 1 - 4 26 0.193 93496A415 MCMASTER CARR 10 NOM LOCKWASHER- BRASS A Parts List ITEM NO. QTY DETSHT ASSYSHT DESCRIPTION MATERIAL SIZE...

  6. Solar Pizza Oven Box k - 6

    Office of Environmental Management (EM)

    Ready to Build? BUILD A PIZZA BOX SOLAR OVEN Background The sun is hot enough to bake food. Here's how to make a simple solar oven that gets hot enough to warm up cookies and other...

  7. Department of Energy Idaho - Press Box

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Press Box Press Box DOE Pulse DOE-EM Related Newsletters on the American Recovery and Reinvestment Act of 2009 DOE-Idaho Operations Summary DOE-ID Press Releases and Video Clips DOE-HQ News Press Releases Idaho Media INL Press Releases Public Affairs INL IMPACTS Boise State University recently did a study of the economic impacts of the Idaho National Laboratory and the other contractors doing work at DOE's Idaho Site. The link below will take you to the study.

  8. Enhanced Stuffing Box Rubbers Test Report

    SciTech Connect (OSTI)

    Rochelle, J.

    2002-07-01

    The Rocky Mountain Oilfield Testing Center (RMOTC) and Scott's Oil Field Service tested an enhanced stuffing box rubber at the Naval Petroleum Reserve No. 3. The enhanced stuffing box rubbers have saved money from not having to replace packing as often and not spilling valuable oil on the ground. A reduction in environmental hazards and the cost of cleaning up spilled oil have also been a benefit.

  9. Glove box on vehicular instrument panel

    DOE Patents [OSTI]

    Atarashi, Kazuya

    1985-01-01

    A glove box for the upper surface of an automobile dashboard whereby it may be positioned close to the driver. The glove box lid is pivotally supported by arms extending down either side to swing forwardly for opening. A hook is pivotally support adjacent an arm and weighted to swing into engagement with the arm to prevent opening of the lid during abrupt deceleration. A toggle spring assists in maintaining the lid in either the open or closed position.

  10. Top quark mass measurements

    SciTech Connect (OSTI)

    L. Cerrito

    2004-07-16

    Preliminary results on the measurement of the top quark mass at the Tevatron Collider are presented. In the dilepton decay channel, the CDF Collaboration measures m{sub t} = 175.0{sub -16.9}{sup +17.4}(stat.){+-}8.4(syst.) GeV/c{sup 2}, using a sample of {approx} 126 pb{sup -1} of proton-antiproton collision data at {radical}s = 1.96 TeV (Run II). In the lepton plus jets channel, the CDF Collaboration measures 177.5{sub -9.4}{sup +12.7}(stat.) {+-} 7.1(syst.) GeV/c{sup 2}, using a sample of {approx} 102 pb{sup -1} at {radical}s = 1.96 TeV. The D0 Collaboration has newly applied a likelihood technique to improve the analysis of {approx} 125 pb{sup -1} of proton-antiproton collisions at {radical}s = 1.8 TeV (Run I), with the result: m{sub t} = 180.1 {+-} 3.6(stat.) {+-}3.9(syst.) GeV/c{sup 2}. The latter is combined with all the measurements based on the data collected in Run I to yield the most recent and comprehensive experimental determination of the top quark mass: m{sub t} = 178.0 {+-} 2.7(stat.) {+-} 3.3(syst.) GeV/c{sup 2}.

  11. HYDROGEN AND VOC RETENTION IN WASTE BOXES

    SciTech Connect (OSTI)

    PACE ME; MARUSICH RM

    2008-11-21

    The Hanford Waste Management Project Master Documented Safety Analysis (MDSA) (HNF-14741, 2003) identifies derived safety controls to prevent or mitigate the risks of a single-container deflagration during operations requiring moving, venting or opening transuranic (TRU)-waste containers. The issue is whether these safety controls are necessary for operations involving TRU-waste boxes that are being retrieved from burial at the Hanford Site. This paper investigates the potential for a deflagration hazard within these boxes and whether safety controls identified for drum deflagration hazards should be applied to operations involving these boxes. The study evaluates the accumulation of hydrogen and VOCs within the waste box and the transport of these gases and vapors out of the waste box. To perform the analysis, there were numerous and major assumptions made regarding the generation rate and the transport pathway dimensions and their number. Since there is little actual data with regards to these assumptions, analyses of three potential configurations were performed to obtain some indication of the bounds of the issue (the concentration of hydrogen or flammable VOCs within a waste box). A brief description of each of the three cases along with the results of the analysis is summarized.

  12. Furnace Blower Performance Improvements - Building America Top...

    Energy.gov (indexed) [DOE]

    Researchers at Lawrence Berkeley National Laboratory (LBNL) garnered a 2013 Top Innovation ... Read about this Top Innovation. See an example of this Top Innovation in action. Find more ...

  13. Building America Top Innovations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Research Building America Top Innovations Building America Top Innovations New Top Innovations are awarded annually for outstanding Building America research achievements. Each ...

  14. Examination of a Junction-Box Adhesion Test for Use in Photovoltaic Module Qualification (Presentation)

    SciTech Connect (OSTI)

    Miller, D. C.; Wohlgemuth, J. H.

    2012-08-01

    Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development. There are historical incidences of adverse effects (e.g., fires) caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp heat' IEC qualification test is proposed to verify the basic robustness of its adhesion system. The details of the proposed test will be described, in addition to the preliminary results obtained using representative materials and components. The described discovery experiments examine moisture-cured silicone, foam tape, and hot-melt adhesives used in conjunction with PET or glass module 'substrates.' To be able to interpret the results, a set of material-level characterizations was performed, including thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. PV j-boxes were adhered to a substrate, loaded with a prescribed weight, and then placed inside an environmental chamber (at 85C, 85% relative humidity). Some systems did not remain attached through the discovery experiments. Observed failure modes include delamination (at the j-box/adhesive or adhesive/substrate interface) and phase change/creep. The results are discussed in the context of the application requirements, in addition to the plan for the formal experiment supporting the proposed modification to the qualification test.

  15. Examination of a Junction-Box Adhesion Test for Use in Photovoltaic Module Qualification: Preprint

    SciTech Connect (OSTI)

    Miller, D. C.; Wohlgemuth, J. H.

    2012-08-01

    Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development. There are historical incidences of adverse effects (e.g., fires) caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp heat' IEC qualification test is proposed to verify the basic robustness of its adhesion system. The details of the proposed test will be described, in addition to the preliminary results obtained using representative materials and components. The described discovery experiments examine moisture-cured silicone, foam tape, and hot-melt adhesives used in conjunction with PET or glass module 'substrates.' To be able to interpret the results, a set of material-level characterizations was performed, including thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. PV j-boxes were adhered to a substrate, loaded with a prescribed weight, and then placed inside an environmental chamber (at 85C, 85% relative humidity). Some systems did not remain attached through the discovery experiments. Observed failure modes include delamination (at the j-box/adhesive or adhesive/substrate interface) and phase change/creep. The results are discussed in the context of the application requirements, in addition to the plan for the formal experiment supporting the proposed modification to the qualification test.

  16. Top Event Matrix Analysis Code System.

    Energy Science and Technology Software Center (OSTI)

    2000-06-19

    Version 00 TEMAC is designed to permit the user to easily estimate risk and to perform sensitivity and uncertainty analyses with a Boolean expression such as produced by the SETS computer program. SETS produces a mathematical representation of a fault tree used to model system unavailability. In the terminology of the TEMAC program, such a mathematical representation is referred to as a top event. The analysis of risk involves the estimation of the magnitude ofmore » risk, the sensitivity of risk estimates to base event probabilities and initiating event frequencies, and the quantification of the uncertainty in the risk estimates.« less

  17. Top Science News of 2014

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Top Science News of 2014 Top Science News of 2014 Biosurveillance, secure computing, alternative energy, unique capabilities highlight the year December 22, 2014 Top Science News of 2014 Biosurveillance, secure computing, alternative energy, unique capabilities highlight the year. Contact Communications Office "The breadth of scientific expertise and range of disciplines necessary for supporting Los Alamos's national security mission can be seen when reflecting on some of the year's more

  18. WIPP Receives Top Safety Award

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Waste Isolation Pilot Plant (WIPP) received top accolades from New Mexico's leading mining ... contractor, for receiving the New Mexico Mining Association (NMMA) and New Mexico BMS ...

  19. Promotion of solar box cooker technology

    SciTech Connect (OSTI)

    Stibravy, R.

    1992-09-01

    Over 1.5 billion people are affected by fuel wood shortage, according to the UN Food and Agricultural Organization. Meanwhile solar cookers are under-exploited. The author presents one version of this technology and discusses how it may be promoted world-wide. The increased use of non fossil fuel energy is essential world-wide in combating global warming trends, preserving the environment, conserving resources and achieving sustainable development. The Solar Box Cooker (SBC) - a box within a box - uses an easily available source of such energy that is also renewable (in contrast to energy that, once used, is not, such as oil, coal, gas, wood). It is also readily available for the developing world, and for much of the developed world too.

  20. Advances in the theory of box integrals

    SciTech Connect (OSTI)

    Bailey, David H.; Borwein, J.M.; Crandall, R.E.

    2009-06-25

    Box integrals - expectations <|{rvec r}|{sup s}> or <|{rvec r}-{rvec q}|{sup s}> over the unit n-cube (or n-box) - have over three decades been occasionally given closed forms for isolated n,s. By employing experimental mathematics together with a new, global analytic strategy, we prove that for n {le} 4 dimensions the box integrals are for any integer s hypergeometrically closed in a sense we clarify herein. For n = 5 dimensions, we show that a single unresolved integral we call K{sub 5} stands in the way of such hyperclosure proofs. We supply a compendium of exemplary closed forms that naturally arise algorithmically from this theory.

  1. Solar Pizza Oven Box k - 6

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Ready to Build? BUILD A PIZZA BOX SOLAR OVEN Background The sun is hot enough to bake food. Here's how to make a simple solar oven that gets hot enough to warm up cookies and other treats, like s'mores. It won't get really hot, though, so you can't bake things in it and you won't burn yourself when playing with it. Be sure to have an adult help you with this! Materials - One pizza box from a local pizza delivery store. Here's a good excuse to ask your parents to order pizza tonight! - Newspapers

  2. 2010sr31_box-remediation.doc

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Thursday, November 18, 2010 james-r.giusti@srs.gov Paivi Nettamo, SRNS, (803) 292-2484 paivi.nettamo@srs.gov SRS Recovery Act TRU Waste Project Ahead of Schedule with Box Remediation Program Aiken, SC - The U.S. Department of Energy's Savannah River Site (SRS) started off the last 12 months of the American Recovery and Reinvestment Act with an enormous success in its legacy transuranic (TRU) waste program. The H-Canyon box remediation program has not only met, but beat, its deadline for

  3. Nondestructive assay of boxed radioactive waste

    SciTech Connect (OSTI)

    Gilles, W.P.; Roberts, R.J.; Jasen, W.G.

    1992-12-01

    This paper describes the problems related to the nondestructive assay (NDA) of boxed radioactive waste at the Hanford Site and how Westinghouse Hanford company (WHC) is solving the problems. The waste form and radionuclide content are described. The characteristics of the combined neutron and gamma-based measurement system are described.

  4. Safety evaluation for packaging CPC metal boxes

    SciTech Connect (OSTI)

    Romano, T.

    1995-05-15

    This Safety Evaluation for Packaging (SEP) provides authorization for the use of Container Products Corporation (CPC) metal boxes, as described in this document, for the interarea shipment of radioactive contaminated equipment and debris for storage in the Central Waste Complex (CWC) or T Plant located in the 200 West Area. Authorization is granted until November 30, 1995. The CPC boxes included in this SEP were originally procured as US Department of Transportation (DOT) Specification 7A Type A boxes. A review of the documentation provided by the manufacturer revealed the documentation did not adequately demonstrate compliance to the 4 ft drop test requirement of 49 CFR 173.465(c). Preparation of a SEP is necessary to document the equivalent safety of the onsite shipment in lieu of meeting DOT packaging requirements until adequate documentation is received. The equivalent safety of the shipment is based on the fact that the radioactive contents consist of contaminated equipment and debris which are not dispersible. Each piece is wrapped in two layers of no less than 4 mil plastic prior to being placed in the box which has an additional 10 mil liner. Pointed objects and sharp edges are padded to prevent puncture of the plastic liner and wrapping.

  5. Top-pair production and decay at NLO matched with parton showers

    DOE PAGES-Beta [OSTI]

    Campbell, John M.; Ellis, R. Keith; Nason, Paolo; Re, Emanuele

    2015-04-21

    We present a next-to-leading order (NLO) calculation of tt¯ production in hadronic collisions interfaced to shower generators according to the POWHEG method. We start from an NLO result from previous work, obtained in the zero width limit, where radiative corrections to both production and decays are included. The POWHEG interface required an extension of the POWHEG BOX framework, in order to deal with radiation from the decay of resonances. This extension is fully general (i.e. it can be applied in principle to any process considered in the zero width limit), and is here applied for the first time. In ordermore » to perform a realistic simulation, we introduce finite width effects using different approximations, that we validated by comparing with published exact NLO results. We have interfaced our POWHEG code to the PYTHIA8 shower Monte Carlo generator. At this stage, we dealt with novel issues related to the treatment of resonances, especially with regard to the initial scale for the shower that needs to be set appropriately. This procedure affects, for example, the fragmentation function of the b quark, that we have studied with particular attention. We believe that the tool presented here improves over previous generators for all aspects that have to do with top decays, and especially for the study of issues related to top mass measurements that involve B hadrons or b jets. As a result, the work presented here also constitutes a first step towards a fully consistent matching of NLO calculations involving intermediate resonances decaying into coloured particles, with parton showers.« less

  6. Top-pair production and decay at NLO matched with parton showers

    SciTech Connect (OSTI)

    Campbell, John M.; Ellis, R. Keith; Nason, Paolo; Re, Emanuele

    2015-04-21

    We present a next-to-leading order (NLO) calculation of tt production in hadronic collisions interfaced to shower generators according to the POWHEG method. We start from an NLO result from previous work, obtained in the zero width limit, where radiative corrections to both production and decays are included. The POWHEG interface required an extension of the POWHEG BOX framework, in order to deal with radiation from the decay of resonances. This extension is fully general (i.e. it can be applied in principle to any process considered in the zero width limit), and is here applied for the first time. In order to perform a realistic simulation, we introduce finite width effects using different approximations, that we validated by comparing with published exact NLO results. We have interfaced our POWHEG code to the PYTHIA8 shower Monte Carlo generator. At this stage, we dealt with novel issues related to the treatment of resonances, especially with regard to the initial scale for the shower that needs to be set appropriately. This procedure affects, for example, the fragmentation function of the b quark, that we have studied with particular attention. We believe that the tool presented here improves over previous generators for all aspects that have to do with top decays, and especially for the study of issues related to top mass measurements that involve B hadrons or b jets. The work presented here also constitutes a first step towards a fully consistent matching of NLO calculations involving intermediate resonances decaying into coloured particles, with parton showers.

  7. Top-pair production and decay at NLO matched with parton showers

    DOE PAGES-Beta [OSTI]

    Campbell, John M.; Ellis, R. Keith; Nason, Paolo; Re, Emanuele

    2015-04-21

    We present a next-to-leading order (NLO) calculation of tt production in hadronic collisions interfaced to shower generators according to the POWHEG method. We start from an NLO result from previous work, obtained in the zero width limit, where radiative corrections to both production and decays are included. The POWHEG interface required an extension of the POWHEG BOX framework, in order to deal with radiation from the decay of resonances. This extension is fully general (i.e. it can be applied in principle to any process considered in the zero width limit), and is here applied for the first time. In ordermoreto perform a realistic simulation, we introduce finite width effects using different approximations, that we validated by comparing with published exact NLO results. We have interfaced our POWHEG code to the PYTHIA8 shower Monte Carlo generator. At this stage, we dealt with novel issues related to the treatment of resonances, especially with regard to the initial scale for the shower that needs to be set appropriately. This procedure affects, for example, the fragmentation function of the b quark, that we have studied with particular attention. We believe that the tool presented here improves over previous generators for all aspects that have to do with top decays, and especially for the study of issues related to top mass measurements that involve B hadrons or b jets. The work presented here also constitutes a first step towards a fully consistent matching of NLO calculations involving intermediate resonances decaying into coloured particles, with parton showers.less

  8. Top EM Leadership to Participate in 2016 National Cleanup Workshop |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Top EM Leadership to Participate in 2016 National Cleanup Workshop Top EM Leadership to Participate in 2016 National Cleanup Workshop March 9, 2016 - 12:00pm Addthis Top EM Leadership to Participate in 2016 National Cleanup Workshop WASHINGTON, D.C. - EM's senior leaders are set to join the 2016 National Cleanup Workshop in mid-September in the Washington, D.C.-area. The nuclear cleanup program's leaders scheduled to take part in the workshop include Assistant Secretary

  9. Status of the top quark: Top production cross section and top properties

    SciTech Connect (OSTI)

    Boisvert, V.; /Rochester U.

    2006-08-01

    This report describes the latest cross section and property measurements associated with the top quark at the Tevatron Run II. The largest data sample used is 760 pb{sup -1} of integrated luminosity. Due to its large mass, the top quark might be involved in the process of electroweak symmetry breaking, making it a useful probe for signs of new physics.

  10. Michigan Saves' New Marketing PSAs Use Boxing to Solve "Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Michigan Saves' New Marketing PSAs Use Boxing to Solve "Energy Drama" Michigan Saves' New Marketing PSAs Use Boxing to Solve "Energy Drama" An image from the video with a woman and ...

  11. An Improved Method of Manufacturing Corrugated Boxes: Lateral...

    Office of Scientific and Technical Information (OSTI)

    Country of Publication: United States Language: English Subject: 32 ENERGY ... PERFORMANCE; SPECIFICATIONS; TESTING Corrugated Box Construction, Board ...

  12. An Improved Method of Manufacturing Corrugated Boxes: Lateral...

    Office of Scientific and Technical Information (OSTI)

    and crush resistance (per unit of fiber weight) than the conventional box construction. ... AND UTILIZATION; COMMERCIALIZATION; CONSTRUCTION; FIBERS; FLEXIBILITY; LINERS; ...

  13. Los Alamos National Laboratory top

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    top science news of 2012 December 20, 2012 Scientific advances that caught the world's interest LOS ALAMOS, NEW MEXICO, December 20, 2012-In 2012 Los Alamos National Laboratory made its scientific mark in a wide variety of areas, and the stories that caught the public's attention and that of the science community reflect those broad capabilities. Top science stories for the year traveled from the canyons of Mars to the high desert forests of New Mexico, from cosmic particles to the structure of

  14. Uncovering the single top: observation of electroweak top quark production

    SciTech Connect (OSTI)

    Benitez, Jorge Armando; /Michigan State U.

    2009-08-01

    The top quark is generally produced in quark and anti-quark pairs. However, the Standard Model also predicts the production of only one top quark which is mediated by the electroweak interaction, known as 'Single Top'. Single Top quark production is important because it provides a unique and direct way to measure the CKM matrix element V{sub tb}, and can be used to explore physics possibilities beyond the Standard Model predictions. This dissertation presents the results of the observation of Single Top using 2.3 fb{sup -1} of Data collected with the D0 detector at the Fermilab Tevatron collider. The analysis includes the Single Top muon+jets and electron+jets final states and employs Boosted Decision Tress as a method to separate the signal from the background. The resulting Single Top cross section measurement is: (1) {sigma}(p{bar p} {yields} tb + X, tqb + X) = 3.74{sub -0.74}{sup +0.95} pb, where the errors include both statistical and systematic uncertainties. The probability to measure a cross section at this value or higher in the absence of signal is p = 1.9 x 10{sup -6}. This corresponds to a standard deviation Gaussian equivalence of 4.6. When combining this result with two other analysis methods, the resulting cross section measurement is: (2) {sigma}(p{bar p} {yields} tb + X, tqb + X) = 3.94 {+-} 0.88 pb, and the corresponding measurement significance is 5.0 standard deviations.

  15. SW New Mexico Oil Well Formation Tops

    SciTech Connect (OSTI)

    Shari Kelley

    2015-10-21

    Rock formation top picks from oil wells from southwestern New Mexico from scout cards and other sources. There are differing formation tops interpretations for some wells, so for those wells duplicate formation top data are presented in this file.

  16. GreenTops | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    GreenTops Jump to: navigation, search Name: GreenTops Place: Israel Product: Israel-based assemblers of PV-modules mainly for the agricultural comunity. References: GreenTops1...

  17. TOP500 | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Our Jobs Working at NNSA Blog Home TOP500 TOP500 Two of the World's Most Powerful Computers work for NNSA Two NNSA supercomputers-Trinity and Sequoia-are among the top six...

  18. SciTech_infoBox.png | OSTI, US Dept of Energy Office of Scientific and

    Office of Scientific and Technical Information (OSTI)

    Technical Information SciTech_infoBox

  19. Final TOPS Rpt-10pt.PDF

    Energy.gov (indexed) [DOE]

    OPPORTUNITIES TO INCREASE THE PROLIFERATION RESISTANCE OF GLOBAL CIVILIAN NUCLEAR POWER SYSTEMS (TOPS) REPORT BY THE TOPS TASK FORCE OF THE NUCLEAR ENERGY RESEARCH...

  20. Press Pass - Press Release - Single top quark

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Graphics and photos are available at: http:www.fnal.govpubpresspassimagesSingle-Top-Quark-2009.html Fermilab collider experiments discover rare single top quark Batavia, ...

  1. Unvented, Conditioned Attics - Building America Top Innovation...

    Energy.gov (indexed) [DOE]

    This Top Innovation award demonstrates Building America research from Building Science ... influence code acceptance of this innovation since 2006. Read about this Top Innovation. ...

  2. Basement Insulation Systems - Building America Top Innovation...

    Energy Savers

    Basement Insulation Systems - Building America Top Innovation Basement Insulation Systems - Building America Top Innovation This photo shows a framed basement wall with insulation ...

  3. Vapor Retarder Classification - Building America Top Innovation...

    Energy Savers

    Vapor Retarder Classification - Building America Top Innovation Vapor Retarder Classification - Building America Top Innovation Photo of a vapor retarder classification. Air-tight ...

  4. Picture of the Week: Glove boxing

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    1 Glove boxing In 2000, the U.S. and Russia committed to each "permanently dispose" of "no less than or at least" 34 metric tons of weapons-grade plutonium. The Department of Energy (DOE) announced a strategy for the permanent disposition of U.S. surplus weapons-grade plutonium: convert the energy stored in the nation's stockpile of surplus plutonium pits into electrical power for homes and businesses by burning it as fuel in domestic commercial nuclear reactors. August 7,

  5. Observation of the Top Quark

    DOE R&D Accomplishments [OSTI]

    Kim, S. B.

    1995-08-01

    Top quark production is observed in{bar p}p collisions at{radical}s= 1.8 TeV at the Fermilab Tevatron. The Collider Detector at Fermilab (CDF) and D{O} observe signals consistent with t{bar t} to WWb{bar b}, but inconsistent with the background prediction by 4.8{sigma} (CDF), 4.6a (D{O}). Additional evidence for the top quark Is provided by a peak in the reconstructed mass distribution. The kinematic properties of the excess events are consistent with the top quark decay. They measure the top quark mass to be 176{plus_minus}8(stat.){plus_minus}10(sys.) GeV/c{sup 2} (CDF), 199{sub -21}{sup+19}(stat.){plus_minus}22(sys.) GeV/c{sup 2} (D{O}), and the t{bar t} production cross section to be 6.8{sub -2.4}{sup+3.6}pb (CDF), 6.4{plus_minus}2.2 pb (D{O}).

  6. Box Butte County, Nebraska: Energy Resources | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Box Butte County, Nebraska: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 42.1911471, -103.0817903 Show Map Loading map......

  7. NREL to Test Inverters for the "Little Box Challenge" Presented...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Test Inverters for the "Little Box Challenge" Presented by Google and IEEE September 22, 2014 The Energy Department's National Renewable Energy Laboratory (NREL) will test power ...

  8. BioFuelBox Corporation | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Corporation Name: BioFuelBox Corporation Address: 50 Las Colinas Lane Place: San Jose, California Zip: 95119 Region: Bay Area Sector: Biofuels Product: Makes a modular...

  9. Top decays in extended models

    SciTech Connect (OSTI)

    Gaitan, R.; Miranda, O. G.; Cabral-Rosetti, L. G.

    2009-04-20

    Top quark decays are interesting as a mean to test the Standard Model (SM) predictions. The Cabbibo-Kobayashi-Maskawa (CKM)-suppressed process t{yields}cWW, and the rare decays t{yields}cZ, t{yields}H{sup 0}+c, and t{yields}c{gamma} an excellent window to probe the predictions of theories beyond the SM. We evaluate the flavor changing neutral currents (FCNC) decay t{yields}H{sup 0}+c in the context of Alternative Left-Right symmetric Models (ALRM) with extra isosinglet heavy fermions; the FCNC decays may place at tree level and are only supressed by the mixing between ordinary top and charm quarks. We also comment on the decay process t{yields}c+{gamma}, which involves radiative corrections.

  10. Top Innovative Science of 2013

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Natural Gas Glossary › FAQS › Overview Data Summary Prices Exploration & reserves Production Imports/exports Pipelines Storage Consumption All natural gas data reports Analysis & Projections Major Topics Most popular Consumption Exploration & reserves Imports/exports & pipelines Prices Production Projections Recurring Storage All reports Browse by Tag Alphabetical Frequency Tag Cloud Supplement from: U.S. Crude Oil and Natural Gas Proved Reserves Top 100 U.S. Oil and Gas

  11. Search for Single Top Production at the Tevatron

    SciTech Connect (OSTI)

    Gresele, Ambra; /INFN, Trento

    2006-05-01

    The authors report on a search for Standard Model t-channel and s-channel single top quark production in p{bar p} collisions at a center of mass energy of 1.96 TeV. The authors use a data sample corresponding to 0.7 fb{sup -1} recorded by the upgraded Collider Detector at Fermilab (CDFII) and a data sample corresponding to 370 pb{sup -1} recorded by D0. Both CDF and D0 find no significant evidence for electroweak top quark production and set upper limits at the 95% confidence level on the production cross section.

  12. Measurements of Top Quark Properties

    SciTech Connect (OSTI)

    Cerrito, Lucio

    2009-05-01

    Preliminary results on the measurement of four selected properties of the top quark are presented. The relative fraction of t{bar t} production through gluon fusion has been measured in the t{bar t} dilepton decay channel by the CDF Collaboration as F{sub gg} = 0.53{sub -0.38}{sup +0.36}. Using an integrated luminosity of 2.7 fb{sup -1} collected with the CDF II detector, we also determine the t{bar t} differential cross section with respect to values up to {approx}1 TeV of the t{bar t} invariant mass. We present a model-independent measurement of the helicity of W bosons produced in top quark decays, using an integrated luminosity of up to 2.7 fb{sup -1} collected by the D0 detector, and find the fraction of longitudinal W bosons f{sub 0} = 0.49 {+-} 0.14, and the fraction of right-handed W bosons f{sub +} = 0.11 {+-} 0.08. Finally, we measure the parton level forward-backward asymmetry of pair produced top quarks using an integrated luminosity of 3.2 fb{sup -1} collected with the CDF II detector, and find A{sub FB} = 0.19 {+-} 0.07. All results are consistent with the predictions of the standard model.

  13. A solar box cooker for mass production in East Africa

    SciTech Connect (OSTI)

    Funk, P.A.; Wilcke, W.F.

    1992-12-31

    A solar box cooker produced in Tanzania, East Africa with indigenous materials is described. When compared to a commercially produced glass and cardboard one, it was found to perform as well. Heat transfer through each major component of the cooker is presented. The smallest losses were through the walls of the box. The greatest losses were observed in the cover system.

  14. The design and fabrication of a calibrated hot box apparatus

    SciTech Connect (OSTI)

    Gatland, S.D. II; Goss, W.P.; Curcija, D.

    1997-11-01

    A second generation research calibrated hot box was designed and constructed at the University of Massachusetts`s Building Energy Research Laboratory. The hot box was built to meet the test methodologies specified in the American Society for Testing and Materials (ASTM) Standard Test Methods C 976 for calibrated hot boxes and C 1199 for fenestration system hot box test methods. The hot box has the capability of simulating both parallel and perpendicular weather side wind directions on building assemblies, including fenestration (window and door) systems. The weather side chamber has a temperature range of {minus}23.3 C to 60 C and the room side chamber has a temperature range of 21.1 C to 60 C. The design, fabrication, and instrumentation are described in detail.

  15. Supercomputing Challenge top winners: Los Alamos schools

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Supercomputing Challenge top winners: Los Alamos schools Supercomputing Challenge top winners: Los Alamos schools Cole Kendrick won the top prize for his research project, "Computer Simulation of Dark Matter Effects on Galaxy Rotation". April 26, 2011 Cole Kendrick Cole Kendrick Contact Steve Sandoval Communications Office (505) 665-9206 Email LOS ALAMOS, New Mexico, April 26, 2011-Los Alamos Middle School student Cole Kendrick won the top prize in the 21st New Mexico Supercomputing

  16. Materials Technologies: Goals, Strategies, and Top Accomplishments

    SciTech Connect (OSTI)

    2010-08-02

    Fact sheet describing the goals, strategies, and top accomplishments of the Materials Technologies subprogram of the Vehicle Technologies Program.

  17. Bullseye: Top Strategies for Targeted Marketing (101)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Better Buildings Residential Network Peer Exchange Call Series: Bullseye: Top Strategies for Targeted Marketing (101), call slides and discussion summary.

  18. Table-top job analysis

    SciTech Connect (OSTI)

    Not Available

    1994-12-01

    The purpose of this Handbook is to establish general training program guidelines for training personnel in developing training for operation, maintenance, and technical support personnel at Department of Energy (DOE) nuclear facilities. TTJA is not the only method of job analysis; however, when conducted properly TTJA can be cost effective, efficient, and self-validating, and represents an effective method of defining job requirements. The table-top job analysis is suggested in the DOE Training Accreditation Program manuals as an acceptable alternative to traditional methods of analyzing job requirements. DOE 5480-20A strongly endorses and recommends it as the preferred method for analyzing jobs for positions addressed by the Order.

  19. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-07-01

    This eighteenth quarterly technical progress report of the MHD Integrated Topping cycle Project presents the accomplishments during the period November 1, 1991 to January 31, 1992. The precombustor is fully assembled. Manufacturing of all slagging stage components has been completed. All cooling panels were welded in place and the panel/shell gap was filled with RTV. Final combustor assembly is in progress. The low pressure cooling subsystem (LPCS) was delivered to the CDIF. Second stage brazing issues were resolved. The construction of the two anode power cabinets was completed.

  20. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990's, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

  1. DOE Withdraws Proposed Rulemaking (Test Procedure) and Proposed...

    Energy.gov (indexed) [DOE]

    the notice of proposed rulemaking for a test procedure for set-top boxes and the ... The Energy Department also retains its authority to test set-top boxes under the ENERGY ...

  2. MEMORANDUM

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Steering Committee for the Set-Top Box Energy Conservation Agreement Meeting of ... of the Steering Committee for the Set-Top Box Voluntary Agreement in Washington, D.C. ...

  3. U.S. Energy Department, Pay-Television Industry and Energy Efficiency...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Groups Announce Set-Top Box Energy Conservation Agreement; Will Cut Energy Use for 90 ... Groups Announce Set-Top Box Energy Conservation Agreement; Will Cut Energy Use for 90 ...

  4. Top Quark Studies at D0

    SciTech Connect (OSTI)

    Peters, Reinhild Yvonne

    2014-11-26

    Years after its discovery in 1995 by CDF and D0, the top quark still undergoes intense investigations at the Tevatron. Using up to the full Run II data sample, new measurements of top quark production and properties by the D0 Collaboration are presented. In particular, the first observation of single top quark s-channel production, the measurement of differential tbar t distributions, forward-backward tbar t asymmetry, a new measurement of the top quark mass, and a measurement of the top quark charge are discussed.

  5. CP Violation in Single Top Quark Production

    SciTech Connect (OSTI)

    Geng, Weigang

    2012-01-01

    We present a search for CP violation in single top quark production with the DØ experiment at the Tevatron proton-antiproton collider. CP violation in the top electroweak interaction results in different single top quark production cross sections for top and antitop quarks. We perform the search in the single top quark final state using 5.4 fb-1 of data, in the s-channel, t-channel, and for both combined. At this time, we do not see an observable CP asymmetry.

  6. Measure Guideline: Optimizing the Configuration of Flexible Duct Junction Boxes

    SciTech Connect (OSTI)

    Beach, R.; Burdick, A.

    2014-03-01

    This measure guideline offers additional recommendations to heating, ventilation, and air conditioning (HVAC) system designers for optimizing flexible duct, constant-volume HVAC systems using junction boxes within Air Conditioning Contractors of America (ACCA) Manual D guidance (Rutkowski, H. Manual D -- Residential Duct Systems, 3rd edition, Version 1.00. Arlington, VA: Air Conditioning Contractors of America, 2009.). IBACOS used computational fluid dynamics software to explore and develop guidance to better control the airflow effects of factors that may impact pressure losses within junction boxes among various design configurations (Beach, R., Prahl, D., and Lange, R. CFD Analysis of Flexible Duct Junction Box Design. Golden, CO: National Renewable Energy Laboratory, submitted for publication 2013). These recommendations can help to ensure that a system aligns more closely with the design and the occupants' comfort expectations. Specifically, the recommendations described herein show how to configure a rectangular box with four outlets, a triangular box with three outlets, metal wyes with two outlets, and multiple configurations for more than four outlets. Designers of HVAC systems, contractors who are fabricating junction boxes on site, and anyone using the ACCA Manual D process for sizing duct runs will find this measure guideline invaluable for more accurately minimizing pressure losses when using junction boxes with flexible ducts.

  7. Build a Pizza Box Solar Oven | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Build a Pizza Box Solar Oven Build a Pizza Box Solar Oven Below is information about the student activity/lesson plan from your search. Grades K-4, 5-8, 9-12 Subject Solar Summary Check out this staightforward lesson, that can be adapted for all grade levels, on how to build a solar oven. Curriculum Science, Visual Arts, Language Arts Plan Time One class period Materials One pizza box from a local pizza delivery store, tape, scissors, black construction paper, clear plastic wrap, aluminum foil,

  8. Monroe County Boxing Club | Y-12 National Security Complex

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Monroe County Boxing Club Monroe County Boxing Club The mp4 video format is not supported by this browser. Download video Captions: On Time: 4:00 min. Started as the Tellico Boxing Club by Don Eddington and Poke Byers in 1992, the club produced a national Golden Gloves champion. That champion, Jesse Byers, is now the head coach for the club, which now is located in Madisonville, Tennessee. The club covers registration fees for those who cannot afford it, and all equipment, uniforms, and travel

  9. Remotely maintainable top-loading captive ball valve system for ICPP

    SciTech Connect (OSTI)

    Berry, S.M.

    1994-12-31

    A program was undertaken for the remote maintenance of valve boxes at the Idaho Chemical Processing Plant. The remote adaptive features developed for a 3-in. top-loading captive ball valve have been fabricated and thoroughly tested on a prototype 3-in. valve unit located at the RRMTF. Remote disassembly/assembly has been successfully demonstrated on numerous occasions by the RSA group at WINCO. In addition, the remotely detachable valve actuator rod has also been successfully demonstrated on this prototype unit. Approximately 150 valves of several sizes with remote adaptive features based on WINCO`s prototype development by the RSA group are currently being manufactured.

  10. EEBA Builder's Guides - Building America Top Innovation | Department...

    Energy.gov (indexed) [DOE]

    Image showing EEBA Builder's Guides book covers. This Top Innovation highlights the ... Read the Top Innovation profile on the EEBA Builder Guides. View other Top Innovations in ...

  11. Ducts in Conditioned Space - Building America Top Innovation...

    Energy.gov (indexed) [DOE]

    For this Top Innovation profile, Building America researchers worked with production ... Read about this Top Innovation. See an example of this Top Innovation in action. Find more ...

  12. Building America Top Innovations Hall of Fame Profile - Building...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building America Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance Building America Top ...

  13. GREEN SUPERCOMPUTING IN A DESKTOP BOX

    SciTech Connect (OSTI)

    HSU, CHUNG-HSING; FENG, WU-CHUN; CHING, AVERY

    2007-01-17

    The computer workstation, introduced by Sun Microsystems in 1982, was the tool of choice for scientists and engineers as an interactive computing environment for the development of scientific codes. However, by the mid-1990s, the performance of workstations began to lag behind high-end commodity PCs. This, coupled with the disappearance of BSD-based operating systems in workstations and the emergence of Linux as an open-source operating system for PCs, arguably led to the demise of the workstation as we knew it. Around the same time, computational scientists started to leverage PCs running Linux to create a commodity-based (Beowulf) cluster that provided dedicated computer cycles, i.e., supercomputing for the rest of us, as a cost-effective alternative to large supercomputers, i.e., supercomputing for the few. However, as the cluster movement has matured, with respect to cluster hardware and open-source software, these clusters have become much more like their large-scale supercomputing brethren - a shared (and power-hungry) datacenter resource that must reside in a machine-cooled room in order to operate properly. Consequently, the above observations, when coupled with the ever-increasing performance gap between the PC and cluster supercomputer, provide the motivation for a 'green' desktop supercomputer - a turnkey solution that provides an interactive and parallel computing environment with the approximate form factor of a Sun SPARCstation 1 'pizza box' workstation. In this paper, they present the hardware and software architecture of such a solution as well as its prowess as a developmental platform for parallel codes. In short, imagine a 12-node personal desktop supercomputer that achieves 14 Gflops on Linpack but sips only 185 watts of power at load, resulting in a performance-power ratio that is over 300% better than their reference SMP platform.

  14. Box Elder County, Utah: Energy Resources | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Hide Map This article is a stub. You can help OpenEI by expanding it. Box Elder County is a county in Utah. Its FIPS County Code is 003. It is classified as...

  15. P.O. Box 117, Oak Ridge, TN 37831

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Box 117, Oak Ridge, TN 37831 g (865) 241-8893 g IVsurveys@orau.org On the Web: www.orau.orgenvironmental-assessments-health-physics Oak Ridge Associated Universities (ORAU) is a...

  16. Box Elder, Montana: Energy Resources | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Hide Map This article is a stub. You can help OpenEI by expanding it. Box Elder is a census-designated place in Chouteau County and Hill County, Montana. It...

  17. Y-12s Moon Box ? a big hit in Texas

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    not rub against anything that would mar its shiny finish. Then off it went to Texas. In planning this trip, I first considered shipping the Moon Box, but I did not want to let it...

  18. Recovery Act Begins Box Remediation Operations at F Canyon |...

    Energy.gov (indexed) [DOE]

    The 40-million facility will process approximately 330 boxes containing TRU waste with a radiological risk higher than seen in the rest of the Site's original 5,000-cubic-meter ...

  19. Flexible Work Arrangements Go Outside the Box | GE Global Research

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Flexible Work Arrangements Go Outside the Box Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) ...

  20. Lab Ahead of Schedule Processing Waste in Large Boxes

    Energy.gov [DOE]

    LOS ALAMOS, N.M. – The TRU Waste Program at Los Alamos National Laboratory is currently two months ahead of schedule processing and repackaging waste stored in large fiberglass-reinforced boxes (FRPs).

  1. Top quark mass measurements at CDF

    SciTech Connect (OSTI)

    Brubaker, Erik; /Chicago U., EFI

    2006-05-01

    The mass of the top quark M{sub top} is interesting both as a fundamental parameter of the standard model and as an important input to precision electroweak tests. The Collider Detector at Fermilab (CDF) has a robust program of top quark mass analyses, including the most precise single measurement, M{sub top} = 173.4 {+-} 2.8 GeV/c{sup 2}, using 680 pb{sup -1} of p{bar p} collision data. A combination of current results from CDF gives M{sub top} = 172.0 {+-} 2.7 GeV/c{sup 2}, surpassing the stated goal of 3 GeV/c{sup 2} precision using 2 fb{sup -1} of data. Finally, a combination with current D0 results gives a world average top quark mass of 172.5 {+-} 2.3 GeV/c{sup 2}.

  2. Measure Guideline: Optimizing the Configuration of Flexible Duct Junction Boxes

    SciTech Connect (OSTI)

    Beach, R.; Burdick, A.

    2014-03-01

    This measure guideline offers additional recommendations to heating, ventilation, and air conditioning (HVAC) system designers for optimizing flexible duct, constant-volume HVAC systems using junction boxes within Air Conditioning Contractors of America (ACCA) Manual D guidance. IBACOS used computational fluid dynamics software to explore and develop guidance to better control the airflow effects of factors that may impact pressure losses within junction boxes among various design configurations. These recommendations can help to ensure that a system aligns more closely with the design and the occupants' comfort expectations. Specifically, the recommendations described herein show how to configure a rectangular box with four outlets, a triangular box with three outlets, metal wyes with two outlets, and multiple configurations for more than four outlets. Designers of HVAC systems, contractors who are fabricating junction boxes on site, and anyone using the ACCA Manual D process for sizing duct runs will find this measure guideline invaluable for more accurately minimizing pressure losses when using junction boxes with flexible ducts.

  3. LANL named 2010 top corporate volunteer organization

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2010 top corporate volunteer organization LANL named 2010 top corporate volunteer organization The Laboratory ranked ahead of dozens of other qualifying companies with 10,000 or more employees. May 18, 2011 Building and painting birdhouses with children in Santa Fe Building and painting birdhouses with children in Santa Fe. Contact Steve Sandoval Communications Office (505) 665-9206 Email LOS ALAMOS, New Mexico, May 18, 2011-Los Alamos National Laboratory has earned an award as the top corporate

  4. Top quark mass measurements at CDF

    SciTech Connect (OSTI)

    Maki, Tuula; /Helsinki U. /Helsinki Inst. of Phys.

    2007-10-01

    The top quark mass is interesting both as a fundamental parameter of the standard model as well as an important input to precision electroweak tests. The CDF Collaboration has measured the top quark mass with high precision in all decay channels with complementary methods. A combination of the results from CDF gives a top quark mass of 170.5{+-}1.3(stat.){+-}1.8(syst.) GeV/c{sup 2}.

  5. Unvented, Conditioned Crawlspaces - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Crawlspaces - Building America Top Innovation Unvented, Conditioned Crawlspaces - Building America Top Innovation This photo shows the interior of a framed crawlspace with insulation installed. This Top Innovation profile highlights Building America research into the benefits of closed, conditioned crawlspaces over traditional vented crawlspaces. Crawlspace vents are supposed to prevent moisture problems, based on the assumption that fresh air entering through vents on

  6. Vapor Retarder Classification - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Vapor Retarder Classification - Building America Top Innovation Vapor Retarder Classification - Building America Top Innovation Photo of a vapor retarder classification. Air-tight and well-insulated homes have little or no tolerance for drying if they get wet; moisture control is critical. This Top Innovation profile describes Building America research that established vapor retarder classifications and appropriate applications that has been instrumental in the market

  7. Top Quark Production Asymmetries AFBt and AFBl

    DOE PAGES-Beta [OSTI]

    Berger, Edmond L.; Cao, Qing-Hong; Chen, Chuan-Ren; Yu, Jiang-Hao; Zhang, Hao

    2012-02-14

    A large forward-backward asymmetry is seen in both the top quark rapidity distribution AFBt and in the rapidity distribution of charged leptons AFBl from top quarks produced at the Tevatron. We study the kinematic and dynamic aspects of the relationship of the two observables arising from the spin correlation between the charged lepton and the top quark with different polarization states. We emphasize the value of both measurements, and we conclude that a new physics model which produces more right-handed than left-handed top quarks is favored by the present data.

  8. Exploring Stratocumulus Cloud-Top Entrainment Processes

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... Reference(s) Albrecht B, M Fang, and V Ghate. 2016. "Exploring Stratocumulus Cloud-Top ... Contributors Bruce A. Albrecht, University of Miami Entrainment velocities from the eddy ...

  9. Unvented, Conditioned Crawlspaces - Building America Top Innovation...

    Energy.gov (indexed) [DOE]

    This Top Innovation profile highlights Building America research into the benefits of ... Thousands of homes have now been constructed with this important innovation. Read about ...

  10. Dateline Los Alamos: Top Science News

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Science News of 2014 December 22, 2014 Dateline Los Alamos: Top Science News of 2014 Biosurveillance, secure computing, alternative energy, unique capabilities highlight the year....

  11. Mesa Top Photovoltaic Array (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-07-01

    Fact sheet overview of the Mesa Top Photovoltaic Array project implemented by the Department of Energy Golden Office and National Renewable Energy Laboratory.

  12. Infrastructure Development- Building America Top Innovations

    Energy.gov [DOE]

    Top Innovations in this category include research results that have influenced codes and standards and improvements in education and the transaction process.

  13. MHD Integrated Topping Cycle Project

    SciTech Connect (OSTI)

    Not Available

    1992-02-01

    This fourteenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period November 1, 1990 to January 31, 1991. Testing of the High Pressure Cooling Subsystem electrical isolator was completed. The PEEK material successfully passed the high temperature, high pressure duration tests (50 hours). The Combustion Subsystem drawings were CADAM released. The procurement process is in progress. An equipment specification and RFP were prepared for the new Low Pressure Cooling System (LPCS) and released for quotation. Work has been conducted on confirmation tests leading to final gas-side designs and studies to assist in channel fabrication.The final cathode gas-side design and the proposed gas-side designs of the anode and sidewall are presented. Anode confirmation tests and related analyses of anode wear mechanisms used in the selection of the proposed anode design are presented. Sidewall confirmation tests, which were used to select the proposed gas-side design, were conducted. The design for the full scale CDIF system was completed. A test program was initiated to investigate the practicality of using Avco current controls for current consolidation in the power takeoff (PTO) regions and to determine the cause of past current consolidation failures. Another important activity was the installation of 1A4-style coupons in the 1A1 channel. A description of the coupons and their location with 1A1 channel is presented herein.

  14. Top-of-Rail lubricant

    SciTech Connect (OSTI)

    Alzoubi, M. F.; Fenske, G. R.; Erck, R. A.; Boparai, A. S.

    2000-07-14

    Analysis of the volatile and semivolatile fractions collected after use of the TOR lubricant indicated that other than contaminants in the collection laboratory, no compounds on the EPA's Target Compound Lists (Tables 2 and 5) were detected in these fractions. The data of these qualitative analyses, given in the various tables in the text, indicate only the relative amounts of the tentatively identified compounds. The authors recommend that quantitative analysis be performed on the volatile and semivolatile fractions to allow confirmation of the tentatively identified compounds and to obtain absolute amounts of the detected compounds. Additionally, the semivolatile fraction should be analyzed by liquid chromatography/mass spectrometry to identify compounds that are not chromatographable under the temperature program used for determination of semivolatile compounds. Introducing the top-of-rail (TOR) lubricant into the wheel/rail interface results in a reduction of almost 60% of lateral friction force over the forces encountered under dry conditions. This reveals good potential for energy savings, as well as wear reduction, for railroad companies. In TOR lubrication, an increase in the angle of attack and axle load results in increased lateral friction and rate of lubricant consumption. The most efficient TOR lubricant quantity to be used in the wheel/rail interface must be calculated precisely according to the number of cars, axle loads, train speed, and angle of attack.

  15. Vehicle Technologies Program: Goals, Strategies, and Top Accomplishmen...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Program: Goals, Strategies, and Top Accomplishments (Brochure), Vehicle Technologies Program (VTP) Vehicle Technologies Program: Goals, Strategies, and Top Accomplishments ...

  16. PIA - DOE OCIO, Open Government Plan Comment Box | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOE OCIO, Open Government Plan Comment Box PIA - DOE OCIO, Open Government Plan Comment Box PIA - DOE OCIO, Open Government Plan Comment Box PIA - DOE OCIO, Open Government Plan Comment Box (2.94 MB) More Documents & Publications PIA - HSPD-12 Physical and Logical Access System

  17. TOP500 Supercomputers for June 2002

    SciTech Connect (OSTI)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2002-06-20

    19th Edition of TOP500 List of World's Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.;&BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 19th edition of the TOP500 list of the worlds fastest supercomputers was released today (June 20, 2002). The recently installed Earth Simulator supercomputer at the Earth Simulator Center in Yokohama, Japan, is as expected the clear new number 1. Its performance of 35.86 Tflop/s (trillions of calculations per second) running the Linpack benchmark is almost five times higher than the performance of the now No.2 IBM ASCI White system at Lawrence Livermore National Laboratory (7.2 Tflop/s). This powerful leap frogging to the top by a system so much faster than the previous top system is unparalleled in the history of the TOP500.

  18. Forward-backward asymmetry in top quark-antiquark production

    SciTech Connect (OSTI)

    Abazov, V.M.; Abbott, B.; Acharya, B. S.; Adams, M.; Adams, T.; Alexeev, G. D.; Alkhazov, G.; Alton, A.; Alverson, G.; Alves, G. A.; Aoki, M.; Arov, M.; Askew, A.; Asman, B.; Atramentov, O.; Avila, C.; BackusMayes, J.; Badaud, F.; Bagby, L.; Baldin, B.; Bandurin, D. V.; Banerjee, S.; Barberis, E.; Baringer, P.; Barreto, J.; Bartlett, J. F.; Bassler, U.; Bazterra, V.; Beale, S.; Bean, A.; Begalli, M.; Begel, M.; Belanger-Champagne, C.; Bellantoni, L.; Beri, S. B.; Bernardi, G.; Bernhard, R.; Bertram, I.; Besancon, M.; Beuselinck, R.; Bezzubov, V. A.; Bhat, P. C.; Bhatnagar, V.; Blazey, G.; Blessing, S.; Bloom, K.; Boehnlein, A.; Boline, D.; Boos, E. E.; Borissov, G.; Bose, T.; Brandt, A.; Brandt, O.; Brock, R.; Brooijmans, G.; Bross, A.; Brown, D.; Brown, J.; Bu, X. B.; Buehler, M.; Buescher, V.; Bunichev, V.; Burdin, S.; Burnett, T. H.; Buszello, C. P.; Calpas, B.; Camacho-Perez, E.; Carrasco-Lizarraga, M. A.; Casey, B. C. K.; Castilla-Valdez, H.; Chakrabarti, S.; Chakraborty, D.; Chan, K. M.; Chandra, A.; Chen, G.; Chevalier-Thery, S.; Cho, D. K.; Cho, S. W.; Choi, S.; Choudhary, B.; Cihangir, S.; Claes, D.; Clutter, J.; Cooke, M.; Cooper, W. E.; Corcoran, M.; Couderc, F.; Cousinou, M. -C.; Croc, A.; Cutts, D.; Das, A.; Davies, G.; De, K.; de Jong, S. J.; De La Cruz-Burelo, E.; Deliot, F.; Demarteau, M.; Demina, R.; Denisov, D.; Denisov, S. P.; Desai, S.; Deterre, C.; DeVaughan, K.; Diehl, H. T.; Diesburg, M.; Ding, P. F.; Dominguez, A.; Dorland, T.; Dubey, A.; Dudko, L. V.; Duggan, D.; Duperrin, A.; Dutt, S.; Dyshkant, A.; Eads, M.; Edmunds, D.; Ellison, J.; Elvira, V. D.; Enari, Y.; Evans, H.; Evdokimov, A.; Evdokimov, V. N.; Facini, G.; Ferbel, T.; Fiedler, F.; Filthaut, F.; Fisher, W.; Fisk, H. E.; Fortner, M.; Fox, H.; Fuess, S.; Garcia-Bellido, A.; Gavrilov, V.; Gay, P.; Geng, W.; Gerbaudo, D.; Gerber, C. E.; Gershtein, Y.; Ginther, G.; Golovanov, G.; Goussiou, A.; Grannis, P. D.; Greder, S.; Greenlee, H.; Greenwood, Z. D.; Gregores, E. M.; Grenier, G.; Gris, Ph; Grivaz, J. -F.; Grohsjean, A.; Gruenendahl, S.; Gruenewald, M. W.; Guillemin, T.; Guo, F.; Gutierrez, G.; Gutierrez, P.; Haas, A.; Hagopian, S.; Haley, J.; Han, L.; Harder, K.; Harel, A.; Hauptman, J. M.; Hays, J.; Head, T.; Hebbeker, T.; Hedin, D.; Hegab, H.; Heinson, A. P.; Heintz, U.; Hensel, C.; Heredia-De La Cruz, I.; Herner, K.; Hesketh, G.; Hildreth, M. D.; Hirosky, R.; Hoang, T.; Hobbs, J. D.; Hoeneisen, B.; Hohlfeld, M.; Hubacek, Z.; Huske, N.; Hynek, V.; Iashvili, I.; Ilchenko, Y.; Illingworth, R.; Ito, A. S.; Jabeen, S.; Jaffre, M.; Jamin, D.; Jayasinghe, A.; Jesik, R.; Johns, K.; Johnson, M.; Johnston, D.; Jonckheere, A.; Jonsson, P.; Joshi, J.; Jung, A. W.; Juste, A.; Kaadze, K.; Kajfasz, E.; Karmanov, D.; Kasper, P. A.; Katsanos, I.; Kehoe, R.; Kermiche, S.; Khalatyan, N.; Khanov, A.; Kharchilava, A.; Kharzheev, Y. N.; Kirby, M. H.; Kohli, J. M.; Kozelov, A. V.; Kraus, J.; Kulikov, S.; Kumar, A.; Kupco, A.; Kurca, T.; Kuzmin, V. A.; Kvita, J.; Lammers, S.; Landsberg, G.; Lebrun, P.; Lee, H. S.; Lee, S. W.; Lee, W. M.; Lellouch, J.; Li, L.; Li, Q. Z.; Lietti, S. M.; Lim, J. K.; Lincoln, D.; Linnemann, J.; Lipaev, V. V.; Lipton, R.; Liu, Y.; Liu, Z.; Lobodenko, A.; Lokajicek, M.; de Sa, R. Lopes; Lubatti, H. J.; Luna-Garcia, R.; Lyon, A. L.; Maciel, A. K. A.; Mackin, D.; Madar, R.; Magana-Villalba, R.; Malik, S.; Malyshev, V. L.; Maravin, Y.; Martinez-Ortega, J.; McCarthy, R.; McGivern, C. L.; Meijer, M. M.; Melnitchouk, A.; Menezes, D.; Mercadante, P. G.; Merkin, M.; Meyer, A.; Meyer, J.; Miconi, F.; Mondal, N. K.; Muanza, G. S.; Mulhearn, M.; Nagy, E.; Naimuddin, M.; Narain, M.; Nayyar, R.; Neal, H. A.; Negret, J. P.; Neustroev, P.; Novaes, S. F.; Nunnemann, T.; Obrant, G.; Orbaker, D.; Orduna, J.; Osman, N.; Osta, J.; et. al.

    2011-12-12

    We present a measurement of forward-backward asymmetry in top quark-antiquark production in proton-antiproton collisions in the final state containing a lepton and at least four jets. Using a data set corresponding to an integrated luminosity of 5.4 fb{sup -1}, collected by the D0 experiment at the Fermilab Tevatron Collider, we measure the t{bar t} forward-backward asymmetry to be (9.2 {+-} 3.7)% at the reconstruction level. When corrected for detector acceptance and resolution, the asymmetry is found to be (19.6 {+-} 6.5)%. We also measure a corrected asymmetry based on the lepton from a top quark decay, found to be (15.2 {+-} 4.0)%. The results are compared to predictions based on the next-to-leading-order QCD generator mc@nlo. The sensitivity of the measured and predicted asymmetries to the modeling of gluon radiation is discussed.

  19. Computational Fluid Dynamics Analysis of Flexible Duct Junction Box Design

    SciTech Connect (OSTI)

    Beach, R.; Prahl, D.; Lange, R.

    2013-12-01

    IBACOS explored the relationships between pressure and physical configurations of flexible duct junction boxes by using computational fluid dynamics (CFD) simulations to predict individual box parameters and total system pressure, thereby ensuring improved HVAC performance. Current Air Conditioning Contractors of America (ACCA) guidance (Group 11, Appendix 3, ACCA Manual D, Rutkowski 2009) allows for unconstrained variation in the number of takeoffs, box sizes, and takeoff locations. The only variables currently used in selecting an equivalent length (EL) are velocity of air in the duct and friction rate, given the first takeoff is located at least twice its diameter away from the inlet. This condition does not account for other factors impacting pressure loss across these types of fittings. For each simulation, the IBACOS team converted pressure loss within a box to an EL to compare variation in ACCA Manual D guidance to the simulated variation. IBACOS chose cases to represent flows reasonably correlating to flows typically encountered in the field and analyzed differences in total pressure due to increases in number and location of takeoffs, box dimensions, and velocity of air, and whether an entrance fitting is included. The team also calculated additional balancing losses for all cases due to discrepancies between intended outlet flows and natural flow splits created by the fitting. In certain asymmetrical cases, the balancing losses were significantly higher than symmetrical cases where the natural splits were close to the targets. Thus, IBACOS has shown additional design constraints that can ensure better system performance.

  20. The Top Quark, QCD, And New Physics.

    DOE R&D Accomplishments [OSTI]

    Dawson, S.

    2002-06-01

    The role of the top quark in completing the Standard Model quark sector is reviewed, along with a discussion of production, decay, and theoretical restrictions on the top quark properties. Particular attention is paid to the top quark as a laboratory for perturbative QCD. As examples of the relevance of QCD corrections in the top quark sector, the calculation of e{sup+}e{sup -}+ t{bar t} at next-to-leading-order QCD using the phase space slicing algorithm and the implications of a precision measurement of the top quark mass are discussed in detail. The associated production of a t{bar t} pair and a Higgs boson in either e{sup+}e{sup -} or hadronic collisions is presented at next-to-leading-order QCD and its importance for a measurement of the top quark Yulrawa coupling emphasized. Implications of the heavy top quark mass for model builders are briefly examined, with the minimal supersymmetric Standard Model and topcolor discussed as specific examples.

  1. Exhibit Set Up | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Publications, Exhibits, & Logos » Exhibit Set Up Exhibit Set Up Follow these step-by step instructions in order to set up your exhibit. 1. The exhibit case. Photo of a man opening an exhibit case. 2. Inside the top of the case, you will find shipping labels, extra bulbs, and contact information. Photo of an open exhibit case. 3. Expand the display frame by pulling the center piece apart gently. Red feet should be at bottom front. Photo of a man unfolding an exhibit display frame. 4. Fully

  2. REMOTE REFURBISHMENT OF THE METALLOGRAPHY PREPARATION BOX AT THE INL

    SciTech Connect (OSTI)

    Adam B. Robinson; R. Paul Lind

    2010-09-01

    One of the most utilized hot cell capabilities at the Idaho National Laboratory is referred to as the containment box. This is where all destructive examination samples are prepared for analysis. This one window box is contained within the much larger Hot Fuels Examination Facility which consists of a 21x10x8 meter hot cell with an inert argon atmosphere. The refurbishment of this box entailed removing of all sample preparation equipment and support systems, as well as the design and installation of new preparation equipment. The new equipment consists of low and high speed saws, grinding and polishing equipment, water recirculation systems, and sample storage units. This paper includes the details of this refurbishment.

  3. Top quark mass measurement at the Tevatron

    SciTech Connect (OSTI)

    Guimaraes da Costa, Joao; /Harvard U.

    2004-12-01

    The authors report on the latest experimental measurements of the top quark mass by the CDF and D0 Collaborations at the Fermilab Tevatron. They present a new top mass measurement using the t{bar t} events collected by the D0 Collaboration in Run I between 1994 and 1996. This result is combined with previous measurements to yield a new world top mass average. They also describe several preliminary results using up to 193 pb{sup -1} of t{bar t} events produced in {bar p}p collisions at {radical}s = 1.96 TeV during the Run II of the Tevatron.

  4. Top quark properties from the Tevatron

    SciTech Connect (OSTI)

    Klute, Markus; /MIT, LNS

    2006-05-01

    This report describes latest measurements and studies of top quark properties from the Tevatron in Run II with an integrated luminosity of up to 750 pb{sup -1}. Due to its large mass of about 172 GeV/c{sup 2}, the top quark provides a unique environment for tests of the Standard Model and is believed to yield sensitivity to new physics beyond the Standard Model. With data samples of close to 1 fb{sup -1} the CDF and D0 collaborations at the Tevatron enter a new area of precision top quark measurements.

  5. Precision Determination of the Top Quark Mass

    SciTech Connect (OSTI)

    Movilla Fernandez, Pedro A.; /LBL, Berkeley

    2007-05-01

    The CDF and D0 collaborations have updated their measurements of the mass of the top quark using proton-antiproton collisions at {radical}s = 1.96 TeV produced at the Tevatron. The uncertainties in each of the top-antitop decay channels have been reduced. The new Tevatron average for the mass of the top quark based on about 1 fb{sup -1} of data per experiment is 170.9 {+-} 1.8 GeV/c{sup 2}.

  6. NERSC Supports Top Breakthroughs of 2013

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Supports 2013's Top Breakthroughs NERSC Supports Top Breakthroughs of 2013 December 20, 2013 Linda Vu, +1 510 495 2402, lvu@lbl.gov Research supported by NERSC is being honored by end-of-year reviews in two leading magazines: Physics World and WIRED. The IceCube South Pole Neutrino Observatory was notably named to both lists, being honored as the most important discovery by Physics World. Three of Physics World's top 10 breakthroughs of 2013 went to discoveries that used NERSC resources. In

  7. First NESAP Post-doc Takes on BoxLib

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    First NESAP Post-doc Takes on BoxLib First NESAP Post-doc Takes on BoxLib Brian Friesen to Work with Ann Almgren's Group in CCSE June 22, 2015 brianfriesenphoto Brian Friesen, PhD The first of eight post-doctoral researchers participating in the NERSC Exascale Science Applications Program (NESAP) is now working full time at NERSC. Brian Friesen, a graduate student in computational astrophysics at the University of Oklahoma, joined the NESAP team May 18. He's been assigned to Ann Almgren's group

  8. Dark Decay of the Top Quark

    SciTech Connect (OSTI)

    Kong, Kyoungchul; Lee, Hye-Sung; Park, Myeonghun

    2014-04-01

    We suggest top quark decays as a venue to search for light dark force carriers. The top quark is the heaviest particle in the standard model whose decays are relatively poorly measured, allowing sufficient room for exotic decay modes from new physics. A very light (GeV scale) dark gauge boson (Z') is a recently highlighted hypothetical particle that can address some astrophysical anomalies as well as the 3.6sigma deviation in the muon g-2 measurement. We present and study a possible scenario that top quark decays as t-->bW+Z's. This is the same as the dominant top quark decay (t-->bW) accompanied by one or multiple dark force carriers. The Z' can be easily boosted, and it can decay into highly collimated leptons (lepton-jet) with large branching ratio. We discuss the implications for the Large Hadron Collider experiments including the analysis based on the lepton-jets.

  9. Press Pass - Press Release - Single Top

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    DZero finds evidence of rare single top quark; Observation marks a step closer to finding Higgs boson Batavia, Ill.--Scientists of the DZero collaboration at the Department of...

  10. Dark decay of the top quark

    SciTech Connect (OSTI)

    Kong, Kyoungchul; Lee, Hye -Sung; Park, Myeonghun

    2014-04-01

    We suggest top quark decays as a venue to search for light dark force carriers. Top quark is the heaviest particle in the standard model whose decays are relatively poorly measured, allowing sufficient room for exotic decay modes from new physics. A very light (GeV scale) dark gauge boson (Z') is a recently highlighted hypothetical particle that can address some astrophysical anomalies as well as the 3.6 σ deviation in the muon g-2 measurement. We present and study a possible scenario that top quark decays as t → b W + Z's. This is the same as the dominant top quark decay (t → b W) accompanied by one or multiple dark force carriers. The Z' can be easily boosted, and it can decay into highly collimated leptons (lepton-jet) with large branching ratio. In addition, we discuss the implications for the Large Hadron Collider experiments including the analysis based on the lepton-jets.

  11. JLab Cluster Tops 100 Teraflops | Jefferson Lab

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    JLab Cluster Tops 100 Teraflops JLab Cluster Tops 100 Teraflops NEWPORT NEWS, VA, Oct. 14 - The fastest computer system in Hampton Roads has booted up with more than 100 Teraflops of processing power. Located at the Department of Energy's Thomas Jefferson National Accelerator Facility, the cluster computer system was recently upgraded with video game components to assist scientists in modeling the smallest bits of matter in the universe. "Our resources crossed 100 Teraflops of sustained

  12. The Discovery of the Top Quark

    DOE R&D Accomplishments [OSTI]

    Sinervo, P.K.

    1995-12-01

    The top quark and the Higgs boson are the heaviest elementary particles predicted by the standard model. The four lightest quark flavours, the up, down, strange and charm quarks, were well-established by the mid-1970's. The discovery in 1977 of the {Tau} resonances, a new family of massive hadrons, required the introduction of the fifth quark flavour. Experimental and theoretical studies have indicated that this quark also has a heavier partner, the top quark.

  13. Tools for top physics at CDF

    SciTech Connect (OSTI)

    Palencia, E.; /Fermilab

    2008-07-01

    The authors describe here the different tools used for top physics analysis in the CDF Collaboration. In particular, they discuss how the jet energy scale, lepton identification, b tagging algorithms and the neural networks help to improve the signal to background ratio of the top sample in some cases and to reduce the dominant uncertainties in other. Results using each one of these tools are also presented.

  14. Determination of the width of the top quark

    SciTech Connect (OSTI)

    Abazov, Victor Mukhamedovich; Abbott, Braden Keim; Abolins, Maris A.; Acharya, Bannanje Sripath; Adams, Mark Raymond; Adams, Todd; Alexeev, Guennadi D.; Alkhazov, Georgiy D.; Alton, Andrew K.; Alverson, George O.; Alves, Gilvan Augusto; /Rio de Janeiro, CBPF /Nijmegen U.

    2010-09-01

    We extract the total width of the top quark, {Lambda}{sub t}, from the partial decay width {Lambda}(t {yields} Wb) measured using the t-channel cross section for single top quark production and from the branching fraction B(t {yields} Wb) measured in t{bar t} events using up to 2.3 fb{sup -1} of integrated luminosity collected by the D0 Collaboration at the Tevatron p{bar p} Collider. The result is {Lambda}{sub t} = 1.99{sub -0.55}{sup +0.69} GeV, which translates to a top-quark lifetime of {tau}{sub t} = (3.3{sub -0.9}{sup +1.3}) x 10{sup -25} s. Assuming a high mass fourth generation b{prime} quark and unitarity of the four-generation quark-mixing matrix, we set the first upper limit on |V{sub tb{prime}}| < 0.63 at 95% C.L.

  15. Energy Savings Assessment for Digital-to-Analog Converter Boxes

    SciTech Connect (OSTI)

    Cheung, Hoi Ying Iris; Meier, Alan; Brown, Richard

    2011-01-18

    The Digital Television (DTV) Converter Box Coupon Program was administered by the U.S. government to subsidize purchases of digital-to-analog converter boxes, with up to two $40 coupons for each eligible household. In order to qualify as Coupon Eligible Converter Boxes (CECBs), these devices had to meet a number of minimum performance specifications, including energy efficiency standards. The Energy Star Program also established voluntary energy efficiency specifications that are more stringent than the CECB requirements. In this study, we measured the power and energy consumptions for a sample of 12 CECBs (including 6 Energy Star labeled models) in-use in homes and estimated aggregate energy savings produced by the energy efficiency policies. Based on the 35 million coupons redeemed through the end of the program, our analysis indicates that between 2500 and 3700 GWh per year are saved as a result of the energy efficiency policies implemented on digital-to-analog converter boxes. The energy savings generated are equivalent to the annual electricity use of 280,000 average US homes.

  16. Modeling of RTF Glove-Box and Stripper System

    SciTech Connect (OSTI)

    Hsu, R.H.

    2001-03-28

    The glove box-stripper system for the Replacement Tritium Facility (RTF) has been modeled to determine its steady-state performance. To permit comparison, simulations of modified cases were compared with a standard or base case. This paper discusses tests conducted, results obtained and makes recommendations.

  17. Measurement of top quark polarisation in t-channel single top quark production

    DOE PAGES-Beta [OSTI]

    Khachatryan, Vardan

    2016-04-13

    Our first measurement of the top quark spin asymmetry, sensitive to the top quark polarisation, in t-channel single top quark production is presented. It is based on a sample of pp collisions at a centre-of-mass energy of 8 TeV corresponding to an integrated luminosity of 19.7 fb-1. A high-purity sample of t-channel single top quark events with an isolated muon is selected. Signal and background components are estimated using a fit to data. Furthermore, a differential cross section measurement, corrected for detector effects, of an angular observable sensitive to the top quark polarisation is performed. The differential distribution is usedmore » to extract a top quark spin asymmetry of 0.26 ± 0.03 (stat) ± 0.10 (syst), which is compatible with a p-value of 4.6% with the standard model prediction of 0.44.« less

  18. Measurement of top quark polarisation in t-channel single top quark production

    SciTech Connect (OSTI)

    Khachatryan, Vardan

    2015-11-09

    Our first measurement of the top quark spin asymmetry, sensitive to the top quark polarisation, in t-channel single top quark production is presented. It is based on a sample of pp collisions at a centre-of-mass energy of 8 TeV corresponding to an integrated luminosity of 19.7 fb-1. A high-purity sample of t-channel single top quark events with an isolated muon is selected. Signal and background components are estimated using a fit to data. Furthermore, a differential cross section measurement, corrected for detector effects, of an angular observable sensitive to the top quark polarisation is performed. The differential distribution is used to extract a top quark spin asymmetry of 0.26 ± 0.03 (stat) ± 0.10 (syst), which is compatible with a p-value of 4.6% with the standard model prediction of 0.44.

  19. Top Quark Properties in Little Higgs Models

    SciTech Connect (OSTI)

    Berger, C.F.; Perelstein, M.; Petriello, F.; /Wisconsin U., Madison

    2005-12-08

    Identifying the mechanism which breaks electroweak symmetry and generates fermion masses is one of the main physics goals for both the LHC and the ILC. Studies of the top quark have the potential to illuminate this issue; since it is the heaviest of the Standard Model (SM) fermions, the top is expected to couple strongly to the symmetry-breaking sector. Consequently, the structure of that sector can have significant, potentially observable effects on the properties of the top. for example, it is well known that the vector and axial t{bar t}Z form factors receive large corrections (of order 5-10%) in certain models of dynamical electroweak symmetry breaking [1]. At future colliders such as the LHC and the ILC, we will be able to pursue a program of precision top physics, similar to the program studying the Z at LEP and SLC. In this manuscript, they study the corrections to the top quark properties in ''Little Higgs'' models of electroweak symmetry breaking [2], and compare the expected deviations from the SM predictions with expected sensitivities of experiments at the LHC and the ILC. In the Little Higgs models, electroweak symmetry is driven by the radiative effects from the top sector, including the SM-like top and its heavy counterpart, a TeV-scale ''heavy top'' T. Probing this structure experimentally is quite difficult. While the LHC should be able to discover the T quark, its potential for studying its couplings is limited [3,4]. Direct production of the T will likely be beyond the kinematic reach of the ILC. However, we will show below that the corrections to the gauge couplings of the SM top, induced by its mixing with the T, will be observable at the ILC throughout the parameter range consistent with naturalness. Measuring these corrections will provide a unique window on the top sector of the Little Higgs. Many Little Higgs models have been proposed in the literature. We will consider two examples in this study, the ''Littlest Higgs'' model [5], and its

  20. Fact #651: November 29, 2010 Hybrid Vehicles Dominate EPA's Top...

    Energy.gov (indexed) [DOE]

    Each year, the Environmental Protection Agency (EPA) produces a list of the top ten most ... Top Ten EPA-Rated Fuel Sippers (2011) Chart of top ten EPA-Rated Fuel Sippers (2011). ...

  1. Americas_Next_Top_Energy_Innovator_Fact_Sheet.pdf | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    AmericasNextTopEnergyInnovatorFactSheet.pdf AmericasNextTopEnergyInnovatorFactSheet.pdf PDF icon AmericasNextTopEnergyInnovatorFactSheet.pdf More Documents & ...

  2. Buried and Encapsulated Ducts - Building America Top Innovation...

    Energy.gov (indexed) [DOE]

    method suitable for both new and existing homes that won a 2013 Top Innovation award. ... Learn more about this Top Innovation. See an example of this Top Innovation in action. ...

  3. Top anti-top forward-backward asymmetry in the economical 331 model

    SciTech Connect (OSTI)

    Mekahlia, A.; Mebarki, N.; Haouchine, M.

    2012-06-27

    Within the economical 331 model the top-antitop asymmetry at the Tevatron where the quark-antiquark annihilation subprocess dominates is calculated. The results are also discussed.

  4. Review of Literature on Terminal Box Control, Occupancy Sensing Technology and Multi-zone Demand Control Ventilation (DCV)

    SciTech Connect (OSTI)

    Liu, Guopeng; Dasu, Aravind R.; Zhang, Jian

    2012-03-01

    This report presents an overall review of the standard requirement, the terminal box control, occupancy sensing technology and DCV. There is system-specific guidance for single-zone systems, but DCV application guidance for multi-zone variable air volume (VAV) systems is not available. No real-world implementation case studies have been found using the CO2-based DCV. The review results also show that the constant minimum air flow set point causes excessive fan power consumption and potential simultaneous heating and cooling. Occupancy-based control (OBC) is needed for the terminal box in order to achieve deep energy savings. Key to OBC is a technology for sensing the actual occupancy of the zone served in real time. Several technologies show promise, but none currently fully meets the need with adequate accuracy and sufficiently low cost.

  5. Electrical contact tool set station

    DOE Patents [OSTI]

    Byers, M.E.

    1988-02-22

    An apparatus is provided for the precise setting to zero of electrically conductive cutting tools used in the machining of work pieces. An electrically conductive cylindrical pin, tapered at one end to a small flat, rests in a vee-shaped channel in a base so that its longitudinal axis is parallel to the longitudinal axis of the machine's spindle. Electronic apparatus is connected between the cylindrical pin and the electrically conductive cutting tool to produce a detectable signal when contact between tool and pin is made. The axes of the machine are set to zero by contact between the cutting tool and the sides, end or top of the cylindrical pin. Upon contact, an electrical circuit is completed, and the detectable signal is produced. The tool can then be set to zero for that axis. Should the tool contact the cylindrical pin with too much force, the cylindrical pin would be harmlessly dislodged from the vee-shaped channel, preventing damage either to the cutting tool or the cylindrical pin. 5 figs.

  6. Building America Top Innovations Hall of Fame Profile - Building...

    Energy Savers

    Building America Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) Building America Top Innovations Hall of Fame Profile - Building Energy...

  7. Programs and Contractors -Top Tips for Successful Relationships...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Programs and Contractors -Top Tips for Successful Relationships (101) Programs and Contractors -Top Tips for Successful Relationships (101) Better Buildings Residential Network ...

  8. HVAC Cabinet Air Leakage Test Method - Building America Top Innovation...

    Energy Savers

    HVAC Cabinet Air Leakage Test Method - Building America Top Innovation HVAC Cabinet Air Leakage Test Method - Building America Top Innovation While HVAC installers have improved ...

  9. Cyclotron Road: Creating a Home for Top Clean Energy Technology...

    Energy Savers

    Cyclotron Road: Creating a Home for Top Clean Energy Technology Entrepreneurs within our National Laboratories Cyclotron Road: Creating a Home for Top Clean Energy Technology ...

  10. Measurement of cross section of quark pair production top with...

    Office of Scientific and Technical Information (OSTI)

    Measurement of cross section of quark pair production top with the D0 experiment at the Tevatron and determination the top quark mass using this measure Citation Details ...

  11. High-Efficiency Window Air Conditioners - Building America Top...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    High-Efficiency Window Air Conditioners - Building America Top Innovation High-Efficiency Window Air Conditioners - Building America Top Innovation This photo shows a window air ...

  12. Final Reports on the Top Runner Target Product Standards (Japan...

    Open Energy Information (Open El) [EERE & EIA]

    Reports on the Top Runner Target Product Standards (Japan) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Final Reports on the Top Runner Target Product Standards...

  13. Building America Top Innovations 2014 Profile: California Energy...

    Office of Scientific and Technical Information (OSTI)

    Selection This 2014 Top Innovation profile describes Building America research on ... Country of Publication: United States Language: English Subject: Building America; top ...

  14. Spring Forward: Top Strategies for Growing and Scaling Your Program...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Spring Forward: Top Strategies for Growing and Scaling Your Program (301) Spring Forward: Top Strategies for Growing and Scaling Your Program (301) May 2

  15. GE China Technology Center Wins Top 12 Most Innovative Practices...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    China Technology Center Wins Top 12 Most Innovative Practices Award of "Multinational ... GE China Technology Center Wins Top 12 Most Innovative Practices Award of "Multinational ...

  16. Bullseye: Top Strategies for Targeted Marketing (101) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bullseye: Top Strategies for Targeted Marketing (101) Bullseye: Top Strategies for Targeted Marketing (101) May 12, 2016 1:00PM to 2:3

  17. Top Green Energy Technologies Inc | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Green Energy Technologies Inc Jump to: navigation, search Name: Top Green Energy Technologies Inc Place: Jhunan, Taiwan Zip: 350 Sector: Solar Product: Top Green is a manufacturer...

  18. Top of the World (Siemens) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Siemens) Jump to: navigation, search Name Top of the World (Siemens) Facility Top of the World (Siemens) Sector Wind energy Facility Type Commercial Scale Wind Facility Status In...

  19. Exterior Rigid Insulation Best Practices - Building America Top...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Exterior Rigid Insulation Best Practices - Building America Top Innovation Exterior Rigid Insulation Best Practices - Building America Top Innovation Effec guid-exterior rigid ...

  20. Quality Management System Guidelines - Building America Top Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Quality management tools tailored for the high performance homebuilding industry provide ... View other Top Innovations in the Effective Guidance and Tools category. Top Innovation - ...

  1. Effective Guidance and Tools - Building America Top Innovations...

    Energy Savers

    Effective Guidance and Tools - Building America Top Innovations Effective Guidance and Tools - Building America Top Innovations August 25, 2014 - 11:00am Addthis Effective Guidance ...

  2. DOE Announces Webinars on Top Solar Tools, Building Energy Optimizatio...

    Office of Environmental Management (EM)

    Top Solar Tools, Building Energy Optimization Tool Training, and More DOE Announces Webinars on Top Solar Tools, Building Energy Optimization Tool Training, and More May 8, 2014 - ...

  3. Building Science-Based Climate Maps - Building America Top Innovation...

    Energy Savers

    Building Science-Based Climate Maps - Building America Top Innovation Building Science-Based Climate Maps - Building America Top Innovation Photo showing climate zone maps based on ...

  4. Deputy Energy Secretary Sherwood-Randall Highlights a Top Budget...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Deputy Energy Secretary Sherwood-Randall Highlights a Top Budget Priority in Texas Deputy Energy Secretary Sherwood-Randall Highlights a Top Budget Priority in Texas February 3,...

  5. Top quark pair production cross section at Tevatron (Conference...

    Office of Scientific and Technical Information (OSTI)

    Conference: Top quark pair production cross section at Tevatron Citation Details In-Document Search Title: Top quark pair production cross section at Tevatron You are accessing ...

  6. Feynman Center for Innovation honors top technical trailblazers

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Feynman Center honors top technical trailblazers Feynman Center for Innovation honors top technical trailblazers Gary Grider received the 2015 Richard P. Feynman Innovation Prize for ...

  7. Outside Air Ventilation Controller - Building America Top Innovation...

    Office of Environmental Management (EM)

    Outside Air Ventilation Controller - Building America Top Innovation Outside Air Ventilation Controller - Building America Top Innovation This photo shows a two-story house with ...

  8. Unvented Crawlspace Code Adoption - Building America Top Innovation...

    Energy Savers

    Unvented Crawlspace Code Adoption - Building America Top Innovation Unvented Crawlspace Code Adoption - Building America Top Innovation Photo of an unvented and insulated ...

  9. Advanced Framing Systems and Packages - Building America Top...

    Energy Savers

    Advanced Framing Systems and Packages - Building America Top Innovation Advanced Framing Systems and Packages - Building America Top Innovation This photo shows advanced framing ...

  10. Feynman Center for Innovation honors top technical trailblazers

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Feynman Center honors top technical trailblazers Feynman Center for Innovation honors top ... Gary Grider (second from right) with the 2015 Richard P. Feynman Innovation Prize. Also ...

  11. Tankless Gas Water Heater Performance - Building America Top...

    Energy Savers

    Tankless Gas Water Heater Performance - Building America Top Innovation Tankless Gas Water Heater Performance - Building America Top Innovation This photo shows a hot water heater ...

  12. Water Management Guide - Building America Top Innovation | Department...

    Energy Savers

    Water Management Guide - Building America Top Innovation Water Management Guide - Building America Top Innovation Cover of the EEBA Water Management Guide. As energy codes and ...

  13. America Chooses the Next Top Energy Innovator | Department of...

    Energy.gov (indexed) [DOE]

    The Americas Next Top Energy Innovator Challenge makes inventions and technologies ... The America's Next Top Energy Innovator Challenge makes inventions and technologies ...

  14. Attic Air Sealing Guide - Building America Top Innovation | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Attic Air Sealing Guide - Building America Top Innovation Attic Air Sealing Guide - Building America Top Innovation Image showing step-by-step instructions for air sealing. One of ...

  15. V-189: Oracle VirtualBox 'tracepath' Bug Lets Local Guest Users...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Oracle VirtualBox 'tracepath' Bug Lets Local Guest Users Deny Service on the Target Host V-189: Oracle VirtualBox 'tracepath' Bug Lets Local Guest Users Deny Service on the Target...

  16. Technology Solutions Case Study: New Insights for Improving the Designs of Flexible Duct Junction Boxes

    SciTech Connect (OSTI)

    2014-01-01

    In this project, IBACOS explored the relationships between pressure and physical configurations of flexible duct junction boxes by using computational fluid dynamics simulations to predict individual box parameters and total system pressure, thereby ensuring improved HVAC performance.

  17. On the Occurrence of Thermal Runaway in Diode in the J-Box |...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    On the Occurrence of Thermal Runaway in Diode in the J-Box On the Occurrence of Thermal Runaway in Diode in the J-Box This PowerPoint presentation, focused on the environmental ...

  18. Towards the Top with D0

    SciTech Connect (OSTI)

    Deliot, Frederic

    2012-01-01

    The plan of this manuscript follows my research path over the past 10 years: the muon identification and common analysis tools at DØ, the measurement of the inclusive production of W boson decaying into muon and top quark studies. In the first section, I describe my work about muon identification, certification of the standard muon identification criteria, measurement of the muon selection efficiency and about the development of common analysis format and tools. In the second section, I explain how these efficiency measurements can be used to measure the inclusive W boson production cross section in the muon channel. The W ! μν cross section measurement can be seen as a standard candle to establish several analysis pieces that have to be put in place to perform more complex measurements like top quark analyses. In the last section I introduce more extensively the top quark physics at the Tevatron and describe in more details the main analyses in the dilepton channel I was involved in: the measurement of the tt inclusive cross section in the dilepton channel as well as the ratio of cross sections, the measurement of the top quark mass in the dilepton channel, the extraction of the mass from the tt cross section and the Tevatron top quark mass combination. Before concluding, I finish the section with the description of the latest results on the tt charge asymmetry both at the Tevatron and at the LHC.

  19. A measurement of the top quark's charge

    SciTech Connect (OSTI)

    Unalan, Zeynep Gunay; /Michigan State U.

    2007-11-01

    The top quark was discovered in 1995 at the Fermilab National Accelerator Laboratory (Fermilab). One way to confirm if the observed top quark is really the top quark posited in the Standard Model (SM) is to measure its electric charge. In the Standard Model the top quark is the isospin partner of the bottom quark and is expected to have a charge of +2/3. However, an alternative 'exotic' model has been proposed with a fourth generation exotic quark that has the same characteristics, such as mass, as our observed top but with a charge of -4/3. This thesis presents the first CDF measurement of the top quark's charge via its decay products, a W boson and a bottom quark, using {approx} 1 fb{sup -1} of data. The data were collected by the CDF detector from proton anti-proton (p{bar p}) collisions at {radical}s = 1.96 TeV at Fermilab. We classify events depending on the charges of the bottom quark and associated W boson and count the number of events which appear 'SM-like' or 'exotic-like' with a SM-like event decaying as t {yields} W{sup +}b and an exotic event as t {yields} W{sup -}b. We find the p-value under the Standard Model hypothesis to be 0:35 which is consistent with the Standard Model. We exclude the exotic quark hypothesis at an 81% confidence level, for which we have chosen a priori that the probability of incorrectly rejecting the SM would be 1%. The calculated Bayes Factor (BF) is 2 x Ln(BF)=8.54 which is interpreted as the data strongly favors the Standard Model over the exotic quark hypothesis.

  20. NREL Researcher is Top World Physicist

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    is Top World Physicist For more information contact: Kerry Masson, (303) 275-4083 e:mail: kerry_masson@nrel.gov Golden, Colo., March 17, 1998 — Dr. Alex Zunger, Institute Research Fellow at the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL), has been ranked as one of the top physicists in the world by the Institute of Scientific Information (ISI). The standing is based on the number of times his research has been cited by fellow scientists. Of the 517,111

  1. TOP500 Supercomputers for November 2003

    SciTech Connect (OSTI)

    Strohmaier, Erich; Meuer, Hans W.; Dongarra, Jack; Simon, Horst D.

    2003-11-16

    22nd Edition of TOP500 List of World s Fastest Supercomputers Released MANNHEIM, Germany; KNOXVILLE, Tenn.; BERKELEY, Calif. In what has become a much-anticipated event in the world of high-performance computing, the 22nd edition of the TOP500 list of the worlds fastest supercomputers was released today (November 16, 2003). The Earth Simulator supercomputer retains the number one position with its Linpack benchmark performance of 35.86 Tflop/s (''teraflops'' or trillions of calculations per second). It was built by NEC and installed last year at the Earth Simulator Center in Yokohama, Japan.

  2. Evidence for production of single top quarks

    SciTech Connect (OSTI)

    Abazov, V.M.; Abbott, B.; Abolins, M.; Acharya, B.S.; Adams, M.; Adams, T.; Aguilo, E.; Ahn, S.H.; Ahsan, M.; Alexeev, G.D.; Alkhazov, G.; /St. Petersburg, INP /Michigan U.

    2008-03-01

    We present first evidence for the production of single top quarks in the D0 detector at the Fermilab Tevatron p{bar p} collider. The standard model predicts that the electroweak interaction can produce a top quark together with an antibottom quark or light quark, without the antiparticle top quark partner that is always produced from strong coupling processes. Top quarks were first observed in pair production in 1995, and since then, single top quark production has been searched for in ever larger datasets. In this analysis, we select events from a 0.9 fb{sup -1} dataset that have an electron or muon and missing transverse energy from the decay of a W boson from the top quark decay, and two, three, or four jets, with one or two of the jets identified as originating from a b hadron decay. The selected events are mostly backgrounds such as W+jets and t{bar t} events, which we separate from the expected signals using three multivariate analysis techniques: boosted decision trees, Bayesian neural networks, and matrix element calculations. A binned likelihood fit of the signal cross section plus background to the data from the combination of the results from the three analysis methods gives a cross section for single top quark production of {sigma}(p{bar p} {yields} tb + X, tqb + X) = 4.7 {+-} 1.3 pb. The probability to measure a cross section at this value or higher in the absence of signal is 0.014%, corresponding to a 3.6 standard deviation significance. The measured cross section value is compatible at the 10% level with the standard model prediction for electroweak top quark production. We use the cross section measurement to directly determine the Cabibbo-Kobayashi-Maskawa quark mixing matrix element that describes the Wtb coupling and find |V{sub tb}f{sub 1}{sup L}| = 1.31{sub -0.21}{sup +0.25}, where f{sub 1}{sup L} is a generic vector coupling. This model-independent measurement translates into 0.68 < |V{sub tb}| {le} 1 at the 95% C.L. in the standard model.

  3. Top and Electroweak Measurements at the Tevatron

    SciTech Connect (OSTI)

    Bartos, P.

    2016-01-01

    In this report, we summarize the latest results of the top-quark mass and electroweak measurements from the Tevatron. Since the world combination of top-quark mass measurements was done, CDF and D0 experiments improved the precision of several results. Some of them reach the relative precition below 1% for a single measurement. From the electroweak results, we report on the WW and WZ production cross section, measurements of the weak mixing angle and indirect measurements of W boson mass. The Tevatron results of the weak mixing angle are still the most precise ones of hadron colliders.

  4. Top Quark Spin Correlations at the Tevatron

    SciTech Connect (OSTI)

    Head, Tim; /Manchester U.

    2010-07-01

    Recent measurements of the correlation between the spin of the top and the spin of the anti-top quark produced in proton anti-proton scattering at a center of mass energy of {radical}s = 1.96 Tev by the CDF and D0 collaborations are discussed. using up to 4.3 fb{sup -1} of data taken with the CDF and D0 detectors the spin correlation parameter C, the degree to which the spins are correlated, is measured in dileptonic and semileptonic final states. The measurements are found to be in agreement with Standard Model predictions.

  5. Turmoil at the Top of the World

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Turmoil at the Top of the World 1663 Los Alamos science and technology magazine Latest Issue:July 2016 past issues All Issues » submit Turmoil at the Top of the World The Arctic tundra is being drained and dried by the warming climate. July 21, 2016 arctic tundra signature pattern of polygons The Arctic tundra has a signature pattern of polygons due to complex interactions between soil and water-interactions that are being disrupted by the warming climate. "It's exciting but also scary. I

  6. Studies of top quark properties and search for electroweak single top quark production at the Tevatron

    SciTech Connect (OSTI)

    Datta, Mousumi; /Fermilab

    2007-10-01

    The top quark was discovered in 1995 by the CDF and D0 experiments at the Fermilab Tevatron during the Run I operation. Since the start of the Tevatron Run II in 2001, both experiments have collected {approx}2 fb{sup -1} data samples, which are over twenty times larger than that used in the Run 1 discovery. This larger data sample allows more precise studies of top-quark properties; differences between observed top-quark properties and the Standard Model (SM) prediction may give hints to possible physics beyond the SM. Here we present the latest results on the measurements of top-quark properties and the search for electroweak (EW) single top quark production from the CDF and D0 collaborations. The integrated luminosity used for the measurements corresponds to about 1 fb{sup -1}.

  7. Safeguards Approaches for Black Box Processes or Facilities

    SciTech Connect (OSTI)

    Diaz-Marcano, Helly; Gitau, Ernest TN; Hockert, John; Miller, Erin; Wylie, Joann

    2013-09-25

    The objective of this study is to determine whether a safeguards approach can be developed for “black box” processes or facilities. These are facilities where a State or operator may limit IAEA access to specific processes or portions of a facility; in other cases, the IAEA may be prohibited access to the entire facility. The determination of whether a black box process or facility is safeguardable is dependent upon the details of the process type, design, and layout; the specific limitations on inspector access; and the restrictions placed upon the design information that can be provided to the IAEA. This analysis identified the necessary conditions for safeguardability of black box processes and facilities.

  8. Box Canyon Model Watershed Project : Annual Report 1997/1998.

    SciTech Connect (OSTI)

    Kalispel Natural Resource Department

    1998-01-01

    In 1997, the Kalispel Natural Resource Department (KNRD) initiated the Box Canyon Watershed Project. This project will concentrate on watershed protection and enhancement from an upland perspective and will complement current instream restoration efforts implemented through the Kalispel Resident Fish Project. Primary focus of this project is the Cee Cee Ah Creek watershed due to its proximity to the Reservation, importance as a traditional fishery, and potential for bull trout and west-slope cutthroat trout recovery.

  9. National Nuclear Security Administration P. O. Box 5400

    National Nuclear Security Administration (NNSA)

    Department of Energy National Nuclear Security Administration P. O. Box 5400 Albuquerque, NM 87185 September 22, 2015 Prospective Offerors: The Department of Energy, National Nuclear Security Administration (DOE/NNSA) is providing the draft Request for Proposal (RFP) entitled. "Design, Integration, Construction, Communication and Engineering 2" (DICCE2), Solicitation Number DE-SOL-0008449, for the purpose of obtaining information, through communications with industry, to assist the

  10. Carlsbad Field Office P. O. Box 3090 Carlsbad

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ergy Carlsbad Field Office P. O. Box 3090 Carlsbad , New Mexico 88221 APR 0 8 2013 Mr. John E. Kieling, Chief Hazardous Waste Bureau New Mexico Environment Department 2905 Rodeo Park Drive East, Building 1 Santa Fe, New Mexico 87505-6303 Subject: Notification of Class 2 Permit Modification Request to th e Waste Isolation Pilot Plant Hazardous Waste Facility Permit Number: NM4890 139088-TS DF Dear Mr. Kieling : Enclosed is the following Class 2 Permit Modification Request: * Modify Excluded Waste

  11. FTA Basic Event & Cut Set Ranking.

    Energy Science and Technology Software Center (OSTI)

    1999-05-04

    Version 00 IMPORTANCE computes various measures of probabilistic importance of basic events and minimal cut sets to a fault tree or reliability network diagram. The minimal cut sets, the failure rates and the fault duration times (i.e., the repair times) of all basic events contained in the minimal cut sets are supplied as input data. The failure and repair distributions are assumed to be exponential. IMPORTANCE, a quantitative evaluation code, then determines the probability ofmore » the top event and computes the importance of minimal cut sets and basic events by a numerical ranking. Two measures are computed. The first describes system behavior at one point in time; the second describes sequences of failures that cause the system to fail in time. All measures are computed assuming statistical independence of basic events. In addition, system unavailability and expected number of system failures are computed by the code.« less

  12. Figure 2 (top).gif | OSTI, US Dept of Energy Office of Scientific and

    Office of Scientific and Technical Information (OSTI)

    Technical Information (top).gif

  13. MHD Integrated Topping Cycle Project. Seventeenth quarterly technical progress report, August 1, 1991--October 31, 1991

    SciTech Connect (OSTI)

    Not Available

    1992-07-01

    This seventeenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period August 1, 1991 to October 31, 1991. Manufacturing of the prototypical combustor pressure shell has been completed including leak, proof, and assembly fit checking. Manufacturing of forty-five cooling panels was also completed including leak, proof, and flow testing. All precombustor internal components (combustion can baffle and swirl box) were received and checked, and integration of the components was initiated. A decision was made regarding the primary and backup designs for the 1A4 channel. The assembly of the channel related prototypical hardware continued. The cathode wall electrical wiring is now complete. The mechanical design of the diffuser has been completed.

  14. Vehicle Technologies Program: Goals, Strategies, and Top Accomplishments (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-12-01

    Fact sheet describes the Vehicle Technologies Program and its goals, strategies and top accomplishments.

  15. Materials Technologies: Goals, Strategies, and Top Accomplishments (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-08-01

    Document details the goals, strategies, and top accomplishments of DOE's Materials Technologies subprogram.

  16. System and method for changing a glove attached to a glove box

    DOE Patents [OSTI]

    Aluisi, Alan

    2001-01-01

    A system for changing the gloves of a glove box. The system requires the use of a new glove and a glove change ring to form a temporary secondary barrier to the exchange of atmospheres between the inner glove box and the room in which the glove box is operated. The system describes specific means for disengaging a used glove from the glove box port. The means for disengaging the used glove include use of a glove change hook and use of a glove with an attached tab for use in removal. A method for changing the gloves of a glove box is also described.

  17. Recent Results of Top Quark Physics from the Tevatron

    SciTech Connect (OSTI)

    Peters, R. Y.

    2015-07-09

    Twenty years after its discovery in 1995 by the CDF and D0 collaborations at the Tevatron proton-antiproton collider at Fermilab, the top quark still undergoes intensive studies at the Tevatron and the LHC at CERN. In this article, recent top quark physics results from CDF and D0 are reported. In particular, measurements of single top quark and double top quark production, the $t\\bar{t}$ forward-backward asymmetry and the top quark mass are discussed.

  18. Building America Top Innovations Hall of Fame Profile - Building

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    America's Top Innovations Propel the Home Building Industry toward Higher Performance | Department of Energy Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance Building America Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance This Building America Innovations profile describes the concept for the U.S. Department of Energy

  19. Carbon Molecular Sieve Membrane as a True One Box Unit for Large Scale Hydrogen Production

    SciTech Connect (OSTI)

    Liu, Paul

    2012-05-01

    IGCC coal-fired power plants show promise for environmentally-benign power generation. In these plants coal is gasified to syngas then processed in a water gas-shift (WGS) reactor to maximize the hydrogen/CO{sub 2} content. The gas stream can then be separated into a hydrogen rich stream for power generation and/or further purified for sale as a chemical and a CO{sub 2} rich stream for the purpose of carbon capture and storage (CCS). Today, the separation is accomplished using conventional absorption/desorption processes with post CO{sub 2} compression. However, significant process complexity and energy penalties accrue with this approach, accounting for ~20% of the capital cost and ~27% parasitic energy consumption. Ideally, a one-box process is preferred in which the syngas is fed directly to the WGS reactor without gas pre-treatment, converting the CO to hydrogen in the presence of H{sub 2}S and other impurities and delivering a clean hydrogen product for power generation or other uses. The development of such a process is the primary goal of this project. Our proposed "one-box" process includes a catalytic membrane reactor (MR) that makes use of a hydrogen-selective, carbon molecular sieve (CMS) membrane, and a sulfur-tolerant Co/Mo/Al{sub 2}O{sub 3} catalyst. The membrane reactor's behavior has been investigated with a bench top unit for different experimental conditions and compared with the modeling results. The model is used to further investigate the design features of the proposed process. CO conversion >99% and hydrogen recovery >90% are feasible under the operating pressures available from IGCC. More importantly, the CMS membrane has demonstrated excellent selectivity for hydrogen over H{sub 2}S (>100), and shown no flux loss in the presence of a synthetic "tar"-like material, i.e., naphthalene. In summary, the proposed "one-box" process has been successfully demonstrated with the bench-top reactor. In parallel we have successfully designed and

  20. Performance Demonstration Program Plan for Nondestructive Assay of Boxed Wastes for the TRU Waste Characterization Program

    SciTech Connect (OSTI)

    Carlsbad Field Office

    2001-01-31

    The Performance Demonstration Program (PDP) for nondestructive assay (NDA) consists of a series of tests to evaluate the capability for NDA of transuranic (TRU) waste throughout the Department of Energy (DOE) complex. Each test is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements obtained from NDA systems used to characterize the radiological constituents of TRU waste. The primary documents governing the conduct of the PDP are the Waste Acceptance Criteria for the Waste Isolation Pilot Plant (WAC; DOE 1999a) and the Quality Assurance Program Document (QAPD; DOE 1999b). The WAC requires participation in the PDP; the PDP must comply with the QAPD and the WAC. The WAC contains technical and quality requirements for acceptable NDA. This plan implements the general requirements of the QAPD and applicable requirements of the WAC for the NDA PDP for boxed waste assay systems. Measurement facilities demonstrate acceptable performance by the successful testing of simulated waste containers according to the criteria set by this PDP Plan. Comparison among DOE measurement groups and commercial assay services is achieved by comparing the results of measurements on similar simulated waste containers reported by the different measurement facilities. These tests are used as an independent means to assess the performance of measurement groups regarding compliance with established quality assurance objectives (QAOs). Measurement facilities must analyze the simulated waste containers using the same procedures used for normal waste characterization activities. For the boxed waste PDP, a simulated waste container consists of a modified standard waste box (SWB) emplaced with radioactive standards and fabricated matrix inserts. An SWB is a waste box with ends designed specifically to fit the TRUPACT-II shipping container. SWBs will be used to package a substantial volume of the TRU waste for disposal. These PDP sample components

  1. Electrical utilities relay settings

    SciTech Connect (OSTI)

    HACHE, J.M.

    1999-02-24

    This document contains the Hanford transmission and distribution system relay settings that are under the control of Electrical Utilities.

  2. Operating a blast furnace using dried top gas

    SciTech Connect (OSTI)

    Kundrat, D.M.

    1993-08-10

    A method is described of operating a blast furnace, comprising: introducing into the top of the furnace a charge containing metal oxide, coke and flux, collecting a top gas CO, H[sub 2], carbon dioxide and water from the furnace, increasing the reducing potential of said collected top gas by removing water but without removing carbon dioxide from at least a portion of said collected top gas thereby forming a dried top gas, heating said dried top gas to form a heated dried top gas, introducing said heated dried top gas into the lower half of the stack of the furnace at a position above which said coke is not reactive and introducing an oxygen-containing gas and a hydrogenaceous fuel into the bosh of the furnace whereby said metal oxide is reduced to a molten metal using said heated dried top gas.

  3. The heavy top quark and supersymmetry

    SciTech Connect (OSTI)

    Hall, L.J.

    1997-01-01

    Three aspects of supersymmetric theories are discussed: electroweak symmetry breaking, the issues of flavor, and gauge unification. The heavy top quark plays an important, sometimes dominant, role in each case. Additional symmetries lead to extensions of the Standard Model which can provide an understanding for many of the outstanding problems of particle physics. A broken supersymmetric extension of spacetime allows electroweak symmetry breaking to follow from the dynamics of the heavy top quark; an extension of isospin provides a constrained framework for understanding the pattern of quark and lepton masses; and a grand unified extension of the Standard Model gauge group provides an elegant understanding of the gauge quantum numbers of the components of a generation. Experimental signatures for each of these additional symmetries are discussed.

  4. Top quark and electroweak results from CDF

    SciTech Connect (OSTI)

    Sandra Leone

    2003-11-04

    In 2001 the Tevatron run II began, after a five year period of significant upgrade of the accelerator itself and of the experiments CDF and D0. After a detector commissioning run, the CDF experiment is now taking high quality data with all subsystems functional. We report in this talk the first preliminary CDF results on top quark and W/Z boson properties, based on run II data. The top quark, discovered in 1995 at the Tevatron, has proven to be a very interesting particle. Its properties allow to perform stringent tests of the Standard Model (SM) and to search for new physics through a deviation from SM predictions. We give here some expectations of what Tevatron run II will ultimately provide to our understanding of matter.

  5. Hydrogen Concentration in the Inner-Most Container within a Pencil Tank Overpack Packaged in a Standard Waste Box Package

    SciTech Connect (OSTI)

    Marusich, Robert M.

    2012-01-25

    A set of steady state diffusion flow equations, for the hydrogen diffusion from one bag to the next bag (or one plastic waste container to another), within a set of nested waste bags (or nested waste containers), are developed and presented. The input data is then presented and justified. Inputting the data for each volume and solving these equations yields the steady state hydrogen concentration in each volume. The input data (permeability of the bag surface and closure, dimensions and hydrogen generation rate) and equations are analyzed to obtain the hydrogen concentrations in the innermost container for a set of containers which are analyzed for the TRUCON code for the general waste containers and the TRUCON code for the Pencil Tank Overpacks (PTO) in a Standard Waste Box (SWB).

  6. Setting up File Permissions

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Setting up File Permissions Setting up File Permissions Recommendations for Setting up "Shared" Directories This section shows the recommended commands for setting up shared directories. Please read the full page to get an understanding of what these commands are doing. These recommendations are based on the common use-case at the JGI for user/group read/write and global read access. Creating a New Shared Directory dmj@genepool04:~$ umask 002 # or have this set in .bashrc.ext

  7. NREL'S Zunger Receives Top Scientific Honors

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Top Scientific Honors For more information contact: Gary Schmitz, 303-275-4050 email: Gary Schmitz Golden, Colo., Nov. 29, 2000 - Alex Zunger, a physicist and research fellow at the U.S. Department of Energy's National Renewable Energy Laboratory, has been named the 2001 recipient of the prestigious Rahman Award by the American Physical Society (APS). The award from the APS is bestowed once annually to an individual for "outstanding achievement in computational physics research."

  8. 2016 Top Markets Report Renewable Fuels

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Assessment Tool for Focusing U.S. Government Resources 2016 Top Markets Report U.S. Department of Commerce International Trade Administration Industry & Analysis (I&A) U.S. Department of Commerce International Trade Administration Industry & Analysis (I&A) Renewable Fuels July 13, 2015 Bioenergy 2016 Washington, DC International Trade Administration - Industry & Analysis (I&A) 2 Presentation Outline USG Programs and Services for Bioenergy Exporters  The International

  9. Rare top quark decays in extended models

    SciTech Connect (OSTI)

    Gaitan, R.; Miranda, O. G.; Cabral-Rosetti, L. G.

    2006-09-25

    Flavor changing neutral currents (FCNC) decays t {yields} H0 + c, t {yields} Z + c, and H0 {yields} t + c-bar are discussed in the context of Alternative Left-Right symmetric Models (ALRM) with extra isosinglet heavy fermions where FCNC decays may take place at tree-level and are only suppressed by the mixing between ordinary top and charm quarks, which is poorly constraint by current experimental values. The non-manifest case is also briefly discussed.

  10. Tracking down hyper-boosted top quarks

    DOE PAGES-Beta [OSTI]

    Larkoski, Andrew J.; Maltoni, Fabio; Selvaggi, Michele

    2015-06-05

    The identification of hadronically decaying heavy states, such as vector bosons, the Higgs, or the top quark, produced with large transverse boosts has been and will continue to be a central focus of the jet physics program at the Large Hadron Collider (LHC). At a future hadron collider working at an order-of-magnitude larger energy than the LHC, these heavy states would be easily produced with transverse boosts of several TeV. At these energies, their decay products will be separated by angular scales comparable to individual calorimeter cells, making the current jet substructure identification techniques for hadronic decay modes not directlymore » employable. In addition, at the high energy and luminosity projected at a future hadron collider, there will be numerous sources for contamination including initial- and final-state radiation, underlying event, or pile-up which must be mitigated. We propose a simple strategy to tag such "hyper-boosted" objects that defines jets with radii that scale inversely proportional to their transverse boost and combines the standard calorimetric information with charged track-based observables. By means of a fast detector simulation, we apply it to top quark identification and demonstrate that our method efficiently discriminates hadronically decaying top quarks from light QCD jets up to transverse boosts of 20 TeV. Lastly, our results open the way to tagging heavy objects with energies in the multi-TeV range at present and future hadron colliders.« less

  11. Observation of Single Top Quark Production

    SciTech Connect (OSTI)

    Gerber, Cecilia E.; /Illinois U., Chicago

    2009-09-01

    The author reports on the observation of electroweak production of single top quarks in p{bar p} collisions at {radical}s = 1.96 Tev using 2.3 fb{sup -1} of data collected with the D0 detector at the fermilab Tevatron Collider. Using events containing an isolated electron or muon, missing transverse energy, two, three or four jets, with one or two of them identified as originating from the fragmentation of a b quark, the measured cross section for the process p{bar p} {yields} tb + X, tqb + X is 3.94 {+-} 0.88 pb (for a top quark mass of 170 GeV). the probability to measure a cross section at this value or higher in the absence of signal is 2.5 x 10{sup -7}, corresponding to a 5.0 standard deviation significance. Using the same dataset, the measured cross sections for the t- and the s-channel processes when determined simultaneously with no assumption on their relative production rate are 3.14{sub -0.80}{sup +0.94} pb and 1.05 {+-} 0.81 pb respectively, consistent with standard model expectations. The measured t-channel cross section has a significance of 4.8 standard deviations, representing the first evidence for the production of an individual single top process to be detected.

  12. Dark decay of the top quark

    DOE PAGES-Beta [OSTI]

    Kong, Kyoungchul; Lee, Hye -Sung; Park, Myeonghun

    2014-04-01

    We suggest top quark decays as a venue to search for light dark force carriers. Top quark is the heaviest particle in the standard model whose decays are relatively poorly measured, allowing sufficient room for exotic decay modes from new physics. A very light (GeV scale) dark gauge boson (Z') is a recently highlighted hypothetical particle that can address some astrophysical anomalies as well as the 3.6 σ deviation in the muon g-2 measurement. We present and study a possible scenario that top quark decays as t → b W + Z's. This is the same as the dominant topmore » quark decay (t → b W) accompanied by one or multiple dark force carriers. The Z' can be easily boosted, and it can decay into highly collimated leptons (lepton-jet) with large branching ratio. In addition, we discuss the implications for the Large Hadron Collider experiments including the analysis based on the lepton-jets.« less

  13. Tracking down hyper-boosted top quarks

    SciTech Connect (OSTI)

    Larkoski, Andrew J.; Maltoni, Fabio; Selvaggi, Michele

    2015-06-05

    The identification of hadronically decaying heavy states, such as vector bosons, the Higgs, or the top quark, produced with large transverse boosts has been and will continue to be a central focus of the jet physics program at the Large Hadron Collider (LHC). At a future hadron collider working at an order-of-magnitude larger energy than the LHC, these heavy states would be easily produced with transverse boosts of several TeV. At these energies, their decay products will be separated by angular scales comparable to individual calorimeter cells, making the current jet substructure identification techniques for hadronic decay modes not directly employable. In addition, at the high energy and luminosity projected at a future hadron collider, there will be numerous sources for contamination including initial- and final-state radiation, underlying event, or pile-up which must be mitigated. We propose a simple strategy to tag such "hyper-boosted" objects that defines jets with radii that scale inversely proportional to their transverse boost and combines the standard calorimetric information with charged track-based observables. By means of a fast detector simulation, we apply it to top quark identification and demonstrate that our method efficiently discriminates hadronically decaying top quarks from light QCD jets up to transverse boosts of 20 TeV. Lastly, our results open the way to tagging heavy objects with energies in the multi-TeV range at present and future hadron colliders.

  14. De novo sequencing of peptides from top-down tandem mass spectra

    SciTech Connect (OSTI)

    Vyatkina, Kira; Wu, Si; Dekker, Leendert J.; vanDuijn, Martijn M.; Liu, Xiaowen; Tolic, Nikola; Dvorkin, Mikhail; Alexandrova, Sonya; Luider, Theo N.; Pasa-Tolic, Ljiljana; Pevzner, Pavel A.

    2015-09-28

    De novo sequencing of proteins and peptides is one of the most important problems in mass spectrometry-driven proteomics. A variety of methods have been developed to accomplish this task from a set of bottom-up tandem (MS/MS) mass spectra. However, a more recently emerged top-down technology, now gaining more and more popularity, opens new perspectives for protein analysis and characterization, implying a need in efficient algorithms for processing this kind of MS/MS data. Here we describe a method that allows to retrieve from a set of top-down MS/MS spectra long and accurate sequence fragments of the proteins contained in a sample. To this end, we outline a strategy for generating high-quality sequence tags from top-down spectra, and introduce the concept of a T-Bruijn graph by adapting to the case of tags the notion of an A-Bruijn graph widely used in genomics. The output of the proposed approach represents the set of amino acid strings spelled out by optimal paths in the connected components of a T-Bruijn graph. We illustrate its performance on top-down datasets acquired from carbonic anhydrase 2 (CAH2) and the Fab region of alemtuzumab.

  15. A Single Tower Configuration of the Modular Gamma Box Counter System - 13392

    SciTech Connect (OSTI)

    Morris, K.; Nakazawa, D.; Francalangia, J.; Gonzalez, H.

    2013-07-01

    Canberra's Standard Gamma Box Counter System is designed to perform accurate quantitative assays of gamma emitting nuclides for a wide range of large containers including B-25 crates and ISO shipping containers. Using a modular building-block approach, the system offers tremendous flexibility for a variety of measurement situations with wide ranges of sample activities and throughput requirements, as well as the opportunity to modify the configuration for other applications at a later date. The typical configuration consists of two opposing towers each equipped with two high purity germanium detectors, and an automated container trolley. This paper presents a modified configuration, consisting of a single tower placed inside a measurement trailer with three detector assemblies, allowing for additional vertical segmentation as well as a viewing a container outside the trailer through the trailer wall. An automatic liquid nitrogen fill system is supplied for each of the detectors. The use of a forklift to move the container for horizontal segmentation is accommodated by creating an additional operational and calibration set-up in the NDA 2000 software to allow for the operator to rotate the container and assay the opposite side, achieving the same sensitivity as a comparable two-tower system. This Segmented Gamma Box Counter System retains the core technologies and design features of the standard configuration. The detector assemblies are shielded to minimize interference from environmental and plant background, and are collimated to provide segmentation of the container. The assembly positions can also be modified in height and distance from the container. The ISOCS calibration software provides for a flexible approach to providing the calibrations for a variety of measurement geometries. The NDA 2000 software provides seamless operation with the current configuration, handling the data acquisition and analysis. In this paper, an overview of this system is discussed

  16. Mobile Nondestructive Assay (NDA) Measurements of Standard Waste Boxes (SWB)

    SciTech Connect (OSTI)

    Mozhayev, Andrey V.; Berg, Randal K.; Haggard, Daniel L.; Hilliard, James R.; Mapili, Gabriel M.

    2006-11-01

    A mobile NDA system was composed and qualified for Safeguards measurements of multiple standard waste boxes (SWB) generated as a result of clean-out activities at Hanford’s Plutonium Finishing Plant (PFP). The system included a neutron slab counter and high purity germanium (HPGe) detector. PC/FRAM software was used to determine the isotopic composition of plutonium residue contained in the waste in order to interpret two independent measurement results provided by total neutron counting and gamma energy analysis (GEA). The measurement procedure developed to estimate transuranic (TRU) content of boxes was based on assumptions about characteristics of the matrix and material distribution. The neutron slab counter was calibrated with various plutonium working standards that were placed in a surrogate SWB specifically made to simulate miscellaneous waste debris. Transmission measurements with a californium source were used to correct for the matrix effects. An In-Situ Object Counting System (ISOCS) was used to acquire spectra from SWBs and ISOCS software was applied to generate the efficiency curve of the HPGe detector. Infinite energy extrapolation was introduced to correct GEA results for self-attenuation. The gamma and neutron results obtained on multiple SWBs are compared and discussed in the paper. Revised measurement positions for the detector and the transmission source are also suggested based on experience gained during the measurements.

  17. Tritium stripping in a nitrogen glove box using palladium/zeolite and SAES St 198{trademark}

    SciTech Connect (OSTI)

    Klien, J.E.; Wermer, J.R.

    1995-01-01

    Glove box clean-up experiments were conducted in a nitrogen glove box using palladium deposited on zeolite (Pd/z) and a SAES St 198{trademark} getter as tritium stripping materials. Protium/deuterium samples spiked with tritium were released into a 620 liter glove box to simulate tritium releases in a 10,500 liter glove box. The Pd/z and the SAES St 198{trademark} stripper beds produced a reduction in tritium activity of approximately two to three orders of magnitude and glove box clean-up was limited by a persistent background tritium activity level. Attempts to significantly reduce the glove box activity to lower levels without purging were unsuccessful.

  18. Tritium stripping in a nitrogen glove box using palladium/zeolite and SAES St 198

    SciTech Connect (OSTI)

    Klein, J.E.; Wermer, J.R.

    1995-10-01

    Glove box clean-up experiments were conducted in a nitrogen glove box using palladium deposited on zeolite (Pd/z) and a SAES St 198 getter as tritium stripping materials. Protium/deuterium samples spiked with tritium were released into a 620 liter glove box to simulate tritium releases in a 10,500 liter glove box. The Pd/z and the SAES St 198 stripper beds produced a reduction in tritium activity of approximately two to three orders of magnitude and glove box clean-up was limited by a persistent background tritium activity level. Attempts to significantly reduce the glove box activity to lower levels without purging were unsuccessful. 3 refs., 6 figs., 1 tab.

  19. A wall and edge guarded hot box for thermal transmittance measurements

    SciTech Connect (OSTI)

    Gatland, S.D. II; Miller, R.G.; Goss, W.P.; Baumgardner, R.L.; Williams, R.G.

    1997-11-01

    A unique guarded hot box designed for thermal testing of fenestration products incorporates several new design concepts from guarded hot plates, namely wall and edge guards, is described in detail. The wall and edge guarded hot box was built to meet the test methodologies specified in the American Society for Testing and Materials (ASTM) Standard Test Methods C 236-89, Standard Test Method for Measuring the Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box, C 976-90, Standard Test Method for Measuring the Steady-State Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box and C 1199-91, Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods. Calibration test results for the box wall and specimen frame flanking are presented. Results from calibration transfer standard tests are compared with theoretical calculations and discussed.

  20. Precise measurement of the top-quark mass from lepton+jets events at D0

    DOE PAGES-Beta [OSTI]

    Abazov, Victor Mukhamedovich

    2011-08-09

    We report a measurement of the mass of the top quark in lepton+jets final states of pp&3772; → tt̄ data corresponding to 2.6 fb-1 of integrated luminosity collected at the D0 experiment at the Fermilab Tevatron Collider. Using a matrix element method, we combine an in situ jet energy calibration with the standard jet energy scale derived in studies of Γ + jet and dijet events and employ a novel flavor-dependent jet response correction to measure a top-quark mass of mt = 176.01 ± 1.64 GeV. Combining this result with a previous result obtained on an independent data set, wemore » measure a top-quark mass of mt = 174.94 ± 1.49 GeV for a total integrated luminosity of 3.6 fb-1.« less

  1. Precise measurement of the top-quark mass from lepton+jets events at D0

    DOE PAGES-Beta [OSTI]

    Abazov, Victor Mukhamedovich

    2011-08-09

    We report a measurement of the mass of the top quark in lepton+jets final states of pp&3772; → tt̄ data corresponding to 2.6 fb-1 of integrated luminosity collected at the D0 experiment at the Fermilab Tevatron Collider. Using a matrix element method, we combine an in situ jet energy calibration with the standard jet energy scale derived in studies of Γ + jet and dijet events and employ a novel flavor-dependent jet response correction to measure a top-quark mass of mt = 176.01 ± 1.64 GeV. Combining this result with a previous result obtained on an independent data set, wemore »measure a top-quark mass of mt = 174.94 ± 1.49 GeV for a total integrated luminosity of 3.6 fb-1.« less

  2. Satellite data sets for the atmospheric radiation measurement (ARM) program

    SciTech Connect (OSTI)

    Shi, L.; Bernstein, R.L.

    1996-04-01

    This abstract describes the type of data obtained from satellite measurements in the Atmospheric Radiation Measurement (ARM) program. The data sets have been widely used by the ARM team to derive cloud-top altitude, cloud cover, snow and ice cover, surface temperature, water vapor, and wind, vertical profiles of temperature, and continuoous observations of weather needed to track and predict severe weather.

  3. Measurement of cross section of quark pair production top with...

    Office of Scientific and Technical Information (OSTI)

    cross section of quark pair production top with the D0 experiment at the Tevatron and determination the top quark mass using this measure Citation Details In-Document Search Title: ...

  4. Advanced Technologies and Practices - Building America Top Innovations...

    Office of Environmental Management (EM)

    These Top Innovations ensure a healthy and non-hazardous building environment. 2014 Top Innovation ASHRAE Standard 62.2. Ventilation and Indoor Air Quality in Low-Rise Residential ...

  5. Measurement of the top quark pair production cross section in...

    Office of Scientific and Technical Information (OSTI)

    Measurement of the top quark pair production cross section in proton-proton collisions at sqrts13 TeV Citation Details In-Document Search Title: Measurement of the top quark...

  6. The Business Case for Fuel Cells 2011: Energizing America's Top...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Business Case for Fuel Cells 2011: Energizing America's Top Companies This report ... The Business Case for Fuel Cells 2011: Energizing America's Top Companies (2.22 MB) More ...

  7. Top of the World (GE) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    GE) Jump to: navigation, search Name Top of the World (GE) Facility Top of the World (GE) Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner...

  8. Prof. Robinson named as an emerging top scientist in Materials...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Robinson named as an emerging top scientist in Materials Chemistry April 23rd, 2014 ... Boards of the Journal of Materials Chemistry A as one of the emerging top scientists ...

  9. Los Alamos National Laboratory again top contributor to United...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Top contributor to United Way ff Santa Fe County Los Alamos National Laboratory again top contributor to United Way of Santa Fe County Laboratory employees and Los Alamos National...

  10. Building America Top Innovations 2013 Profile - Zero Energy-Ready...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building America Top Innovations 2013 Profile - Zero Energy-Ready Single-Family Homes Building America Top Innovations 2013 Profile - Zero Energy-Ready Single-Family Homes Many ...

  11. Electroweak and QCD corrections to top-pair hadroproduction in...

    Office of Scientific and Technical Information (OSTI)

    Electroweak and QCD corrections to top-pair hadroproduction in association with heavy bosons Citation Details In-Document Search Title: Electroweak and QCD corrections to top-pair ...

  12. Programs and Contractors - Top Tips for Successful Relationships...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Programs and Contractors - Top Tips for Successful Relationships (101) Programs and Contractors - Top Tips for Successful Relationships (101) October 22, 2015 1:00PM to 2:30PM...

  13. TVA's Shawnee Fossil Plant Unit 6 sets new record for continuous operation

    SciTech Connect (OSTI)

    Peltier, R.

    2008-02-15

    Tennessee Valley Authority's Shawnee Fossil Plant Unit 6 recently set a new 1,093 day continuous run record. The 10 top practices at Shawnee for achieving high performance are discussed.

  14. Michigan Saves' New Marketing PSAs Use Boxing to Solve "Energy Drama"

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Michigan Saves' New Marketing PSAs Use Boxing to Solve "Energy Drama" Michigan Saves' New Marketing PSAs Use Boxing to Solve "Energy Drama" mich_saves_vid.png Better Buildings Neighborhood Program partner Michigan Saves is using humor to help residents in the Great Lakes State become more energy efficient. The program's Avoid Energy Drama public service announcement (PSA) features a series of boxing parody videos about a couple arguing over

  15. Wind Energy Program: Top 10 Program Accomplishments | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Wind Energy Program: Top 10 Program Accomplishments Wind Energy Program: Top 10 Program Accomplishments Brochure on the top accomplishments of the Wind Energy Program, including the development of large wind machines, small machines for the residential market, wind tunnel testing, computer codes for modeling wind systems, high definition wind maps, and successful collaborations. top_10_wind_accomplishments (1.84 MB) More Documents & Publications Wind Program Accomplishments Wind Power Today,

  16. Advanced Technologies and Practices - Building America Top Innovations |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Advanced Technologies and Practices - Building America Top Innovations Advanced Technologies and Practices - Building America Top Innovations July 16, 2014 - 4:04pm Addthis Advanced Technologies and Practices - Building America Top Innovations Top Innovations in this category encompass research in specific technologies and construction practices that improve the building envelope; heating, ventilation, and air conditioning (HVAC); water heating components; and indoor air

  17. America's Next Top Energy Innovator Challenge | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Innovation » America's Next Top Energy Innovator » America's Next Top Energy Innovator Challenge America's Next Top Energy Innovator Challenge The America's Next Top Energy Innovator Challenge, a part of the Startup America initiative, made it easier for start-ups to use inventions and technology developed at the U.S. Department of Energy's 17 National Laboratories and the Y-12 National Security Complex. The companies highlighted below signed option agreements allowing them to license

  18. Building America Top Innovations 2012: Unvented Crawlspaces Code Adoption

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research which has supported acceptance of unvented crawlspaces in the IRC.

  19. Top ECMs for Labs and Data Centers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top ECMs for Labs and Data Centers Top ECMs for Labs and Data Centers Presentation-given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting-covers the top energy conservation measures (ECMs) laboratories and data centers can apply for energy efficiency and savings. Download the Top ECMs for Labs and Data Centers presentation. (3.34 MB) More Documents & Publications A Sustainable Focus for Laboratory Design, Engineering, and Operation Case Study: Innovative Energy

  20. Announcing the "Top 10" List of Green Utility Leaders

    Energy.gov [DOE]

    Find out if your utility made the National Renewable Energy Laboratory's list of top green power programs.

  1. LANL announces Top 10 science & technology developments of 2010

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2010 top 10 science & technology developments LANL announces Top 10 science & technology developments of 2010 Top 10 developments based on major programmatic milestones, strategic potential, scholarly accounts, and associated news coverage. December 20, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to

  2. LANL announces top 10 science stories of 2009

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Top 10 science stories of 2009 LANL announces top 10 science stories of 2009 Top 10 Laboratory science stories of 2009 based on global viewership of online media content and major programmatic milestones. January 8, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos

  3. Vehicle Technologies Program: Goals, Strategies, and Top Accomplishments

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (Brochure), Vehicle Technologies Program (VTP) | Department of Energy Program: Goals, Strategies, and Top Accomplishments (Brochure), Vehicle Technologies Program (VTP) Vehicle Technologies Program: Goals, Strategies, and Top Accomplishments (Brochure), Vehicle Technologies Program (VTP) vtp_goals-strategies-accomp.pdf (1.41 MB) More Documents & Publications Advanced Combustion Engine R&D: Goals, Strategies, and Top Accomplishments Materials Technologies: Goals, Strategies, and Top

  4. Growing the Tool Box for Medical Imaging: The Selenium-72/Arsenic...

    Office of Science (SC) [DOE]

    Growing the Tool Box for Medical Imaging: The Selenium-72Arsenic-72 Generator Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Funding ...

  5. Monumental effort: How a dedicated team completed a massive beam-box

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    relocation for the NSTX upgrade | Princeton Plasma Physics Lab Monumental effort: How a dedicated team completed a massive beam-box relocation for the NSTX upgrade By John Greenwald December 8, 2014 Tweet Widget Google Plus One Share on Facebook An overhead crane lifts the massive box into the NSTX-U test cell (Photo by Mike Viola) An overhead crane lifts the massive box into the NSTX-U test cell Gallery: Overview of the NSTX-U test cell with the second neutral beam box installed at upper

  6. Idle hands: New and improved IdleBox tool to aid in reduction of idling |

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Argonne National Laboratory Idle hands: New and improved IdleBox tool to aid in reduction of idling Mississippi State University EcoCAR 3 team members help conduct an IdleBox campaign at New Hope Middle School in Columbus, Mississippi. Mississippi State University EcoCAR 3 team members help conduct an IdleBox campaign at New Hope Middle School in Columbus, Mississippi. Idle hands: New and improved IdleBox tool to aid in reduction of idling By Scott Jones * July 25, 2016 Tweet EmailPrint The

  7. Diesel prices top $4 per gallon

    U.S. Energy Information Administration (EIA) (indexed site)

    Diesel prices top $4 per gallon The U.S. average retail price for on-highway diesel fuel surpassed the four dollar mark for the first time this year. Prices rose to $4.02 a gallon on Monday. That's up 9 ½ cents from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Prices were highest in the New England region, at 4.24 a gallon, up 5.6 cents from a week ago. Prices were lowest in the Rocky Mountain States at $3.84 a gallon, up almost 11 cents. This is

  8. Top 10 science stories of the year

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    of Energy Combined Heat and Power Top 10 Things You Didn't Know About Combined Heat and Power October 21, 2013 - 11:25am Addthis Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce harmful emissions. | Infographic by <a href="/node/379579">Sarah Gerrity</a>, Energy Department. Learn how combined heat and power could strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce

  9. Top pair production cross section at s**(1/2) = 1.96 TeV and a search for v + a current in top quark decay

    SciTech Connect (OSTI)

    Cabrera, S.; /Valencia U., IFIC

    2006-09-01

    Possible effects from physics beyond the Standard Model have been investigated in top quark decays from a data sample enriched in t{bar t} events produced in p{bar p} collisions at {radical}s = 1.96 TeV with an integrated luminosity of approximately 700 pb{sup -1} and collected with the CDF II detector. The combined t{bar t} production cross section measurement 7.3 {+-} 0.9 pb agrees with the QCD NLO predictions: 6.7 {+-} 0.8 pb assuming m{sub top} = 175 GeV/c{sup 2}. The fraction of the V + A current in top quark decay, f{sub V+A}, is determined using the invariant mass of the charged lepton and the bottom quark jet in the decay chain t {yields} Wb {yields} {ell}{nu}b (where {ell} = e or {mu}). The measured value f{sub V+A} = - 0.06 {+-} 0.25 under the assumption m{sub top} = 175 GeV/c{sup 2} is in agreement with the Standard Model. They set an upper limit on f{sub V+A} of 0.29 at the 95% confidence level.

  10. America's Next Top Energy Model: Tools and Best Practices (101) |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy America's Next Top Energy Model: Tools and Best Practices (101) America's Next Top Energy Model: Tools and Best Practices (101) December 1, 2016 1:00PM to 2:30PM EST Please join this Better Buildings Residential Network peer exchange call to see which top energy models will be strutting their stuff down the runway

  11. A Direct Top-Quark Width Measurement from Lepton + Jets Events at CDF II

    SciTech Connect (OSTI)

    Aaltonen, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J.A.; Apresyan, A.; Arisawa, T.; /Waseda U. /Dubna, JINR

    2010-08-01

    We present a measurement of the top-quark width using t{bar t} events produced in p{bar p} collisions at Fermilab's Tevatron collider and collected by the CDF II detector. In the mode where the top quark decays to a W boson and a bottom quark, we select events in which one W decays leptonically and the other hadronically (lepton + jets channel) . From a data sample corresponding to 4.3 fb{sup -1} of integrated luminosity, we identify 756 candidate events. The top-quark mass and the mass of W boson that decays hadronically are reconstructed for each event and compared with templates of different top-quark widths ({Lambda}{sub t}) and deviations from nominal jet energy scale ({Delta}{sub JES}) to perform a simultaneous fit for both parameters, where {Delta}{sub JES} is used for the in situ calibration of the jet energy scale. By applying a Feldman-Cousins approach, we establish an upper limit at 95% confidence level (CL) of {Lambda}{sub t} < 7.6 GeV and a two-sided 68% CL interval of 0.3 GeV < {Lambda}{sub t} < 4.4 GeV for a top-quark mass of 172.5 GeV/c{sup 2}, which are consistant with the standard model prediction. This is the first direct measurement of {Lambda}{sub t} to set a lower limit with 68% CL.

  12. Collider Detector at Fermilab (CDF): Data from the Top Group's Top Quark Research

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The Collider Detector at Fermilab (CDF) is a Tevatron experiment at Fermilab. The Tevatron, a powerful particle accelerator, accelerates protons and antiprotons close to the speed of light, and then makes them collide head-on inside the CDF detector. The CDF detector is used to study the products of such collisions. The CDF Physics Group at Fermilab is organized into six working groups, each with a specific focus. The Top group studies the properties of the top quark, the heaviest known fundamental particle. Their public web page makes data and numerous figures available from both CDF Runs I and II.

  13. Top 100 Oil and Gas Fields of 2009

    U.S. Energy Information Administration (EIA) (indexed site)

    Top 100 Oil and Gas Fields of 2009 Introduction This supplement to the Energy Information Administration's summary of U.S. Crude Oil, Natural Gas, and Natural Gas Liquids Proved Reserves, 2009 ranks the United States' largest oil and gas fields by their estimated 2009 proved reserves. The Top 100's Share of U.S. Proved Reserves in 2009 The Top 100 oil fields and Top 100 gas fields each accounted for about 60 percent of the respective total proved reserves of the United States. The Top 100 oil

  14. Searches for New Physics in Top Decays at D0

    SciTech Connect (OSTI)

    Pleier, Marc-Andre; /Brookhaven

    2011-08-01

    The Tevatron proton-antiproton collider at Fermilab with its centre of mass energy of 1.96 TeV allows for pair production of top quarks and the study of top quark decay properties. This report reflects the current status of measurements of the W boson helicity in top quark decays and the ratio of top quark branching fractions as well as searches for neutral current top quark decays and pair production of fourth generation t' quarks, performed by the D0 Collaboration utilising datasets of up to 5.4 fb{sup -1}.

  15. Summary of Single top quark production at the Tevatron

    SciTech Connect (OSTI)

    Schwienhorst, R.; CDF, on the

    2014-01-01

    The production of single-top quarks occurs via the weak interaction at the Fermilab Tevatron proton-antiproton collider. Single top quark events are selected in the lepton+jets final state by CDF and D0 and in the missing transverse energy plus jets final state by CDF. Multivariate classifiers separate the s-channel and t-channel single-top signals from the large backgrounds. The combination of CDF and D0 results leads to the first observation of the s-channel mode of single top quark production. The t-channel and single top combined cross sections have also been measured.

  16. Los Alamos National Laboratory top science news of 2012

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Los Alamos National Laboratory top science news of 2012 Los Alamos National Laboratory top science news of 2012 Top science stories for the year traveled from the canyons of Mars to the high desert forests of New Mexico, from cosmic particles to the structure of proteins and enzymes. December 20, 2012 Top science stories for the year traveled from the canyons of Mars to the high desert forests of New Mexico, from cosmic particles to the structure of proteins and enzymes. Top science stories for

  17. FULLY CONVECTIVE MAGNETOROTATIONAL TURBULENCE IN STRATIFIED SHEARING BOXES

    SciTech Connect (OSTI)

    Bodo, G.; Rossi, P.; Cattaneo, F.; Mignone, A.

    2013-07-10

    We present a numerical study of turbulence and dynamo action in stratified shearing boxes with zero magnetic flux. We assume that the fluid obeys the perfect gas law and has finite (constant) thermal diffusivity. We choose radiative boundary conditions at the vertical boundaries in which the heat flux is proportional to the fourth power of the temperature. We compare the results with the corresponding cases in which fixed temperature boundary conditions are applied. The most notable result is that the formation of a fully convective state in which the density is nearly constant as a function of height and the heat is transported to the upper and lower boundaries by overturning motions is robust and persists even in cases with radiative boundary conditions. Interestingly, in the convective regime, although the diffusive transport is negligible, the mean stratification does not relax to an adiabatic state.

  18. Setting up File Permissions

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... Since you are the only user who has access to your personal filegroup (named the same as your username), there is little value in setting the group permission bits unless you also ...

  19. Lab sets new record for waste shipments

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    uranium and above certain quantities. Liquid waste is not allowed. It's packaged in drums or boxes, which are then placed in a large, steel shipping container called a...

  20. Top physics: search for electroweak single top quark production in p anti-p collisions at s**(1/2) = 1.96 tev

    SciTech Connect (OSTI)

    Acosta, D.; The CDF Collaboration

    2005-01-12

    We report on a search for Standard Model t-channel and s-channel single top quark production in p{bar p} collisions at a center of mass energy of 1.96 TeV. We use a data sample corresponding to 162 pb{sup -1} recorded by the upgraded Collider Detector at Fermilab. We find no significant evidence for electroweak top quark production and set upper limits at the 95% confidence level on the production cross section, consistent with the Standard Model: 10.1 pb for the t-channel, 13.6 pb for the s-channel and 17.8 pb for the combined cross section of t- and s-channel.

  1. Regulating the ethylene response of a plant by modulation of F-box proteins

    DOE Patents [OSTI]

    Guo, Hongwei; Ecker, Joseph R.

    2010-02-02

    The invention relates to transgenic plants having reduced sensitivity to ethylene as a result of having a recombinant nucleic acid encoding a F-box protein, and a method of producing a transgenic plant with reduced ethylene sensitivity by transforming the plant with a nucleic acid sequence encoding a F-box protein.

  2. Meeting Concerning Potential Test Procedures and Energy Conservation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Standards for Set-Top Boxes and Network Equipment | Department of Energy Concerning Potential Test Procedures and Energy Conservation Standards for Set-Top Boxes and Network Equipment Meeting Concerning Potential Test Procedures and Energy Conservation Standards for Set-Top Boxes and Network Equipment In compliance with the Department of Energy's guidance on ex parte communications (74 Fed. Reg. 52795 (Oct. 14, 2009)), this memorandum provides a summary of a March 7, 2012, meeting with DOE

  3. U.S. Energy Department, Pay-Television Industry and Energy Efficiency

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Groups Announce Set-Top Box Energy Conservation Agreement; Will Cut Energy Use for 90 Million U.S. Households, Save Consumers Billions | Department of Energy Department, Pay-Television Industry and Energy Efficiency Groups Announce Set-Top Box Energy Conservation Agreement; Will Cut Energy Use for 90 Million U.S. Households, Save Consumers Billions U.S. Energy Department, Pay-Television Industry and Energy Efficiency Groups Announce Set-Top Box Energy Conservation Agreement; Will Cut Energy

  4. Set Equation Transformation System.

    Energy Science and Technology Software Center (OSTI)

    2002-03-22

    Version 00 SETS is used for symbolic manipulation of Boolean equations, particularly the reduction of equations by the application of Boolean identities. It is a flexible and efficient tool for performing probabilistic risk analysis (PRA), vital area analysis, and common cause analysis. The equation manipulation capabilities of SETS can also be used to analyze noncoherent fault trees and determine prime implicants of Boolean functions, to verify circuit design implementation, to determine minimum cost fire protectionmore » requirements for nuclear reactor plants, to obtain solutions to combinatorial optimization problems with Boolean constraints, and to determine the susceptibility of a facility to unauthorized access through nullification of sensors in its protection system. Two auxiliary programs, SEP and FTD, are included. SEP performs the quantitative analysis of reduced Boolean equations (minimal cut sets) produced by SETS. The user can manipulate and evaluate the equations to find the probability of occurrence of any desired event and to produce an importance ranking of the terms and events in an equation. FTD is a fault tree drawing program which uses the proprietary ISSCO DISSPLA graphics software to produce an annotated drawing of a fault tree processed by SETS. The DISSPLA routines are not included.« less

  5. Top pair production in the dilepton decay channel with a tau lepton

    SciTech Connect (OSTI)

    Corbo, Matteo

    2012-09-19

    The top quark pair production and decay into leptons with at least one being a τ lepton is studied in the framework of the CDF experiment at the Tevatron proton antiproton collider at Fermilab (USA). The selection requires an electron or a muon produced either by the τ lepton decay or by a W decay. The analysis uses the complete Run II data set i.e. 9.0 fb-1, selected by one trigger based on a low transverse momentum electron or muon plus one isolated charged track. The top quark pair production cross section at 1.96 TeV is measured at 8.2 ± 1.7+1.2-1.1 ± 0.5 pb, and the top branching ratio into τ lepton is measured at 0.120 ± 0.027+0.022 -0.019 ± 0.007 with statistical, systematics and luminosity uncertainties. These are up to date the most accurate results in this top decay channel and are in good agreement with the results obtained using other decay channels of the top at the Tevatron. The branching ratio is also measured separating the single lepton from the two leptons events with a log likelihood method. This is the first time these two signatures are separately identified. With a fit to data along the log-likelihood variable an alternative measurement of the branching ratio is made: 0.098 ± 0.022(stat:) ± 0.014(syst:); it is in good agreement with the expectations of the Standard Model (with lepton universality) within the experimental uncertainties. The branching ratio is constrained to be less than 0.159 at 95% con dence level. This limit translates into a limit of a top branching ratio into a potential charged Higgs boson.

  6. Search for Electroweak Single-Top Quark Production with the CDF II Experiment

    SciTech Connect (OSTI)

    Buehler, Matthias; /Karlsruhe U., EKP

    2006-08-01

    The CDF II experiment and the Tevatron proton-antiproton collider are parts of the Fermi National Laboratories (Fermilab). The Fermilab is located in the vicinity of Chicago, USA. Today, the Tevatron is the only collider which is able to produce the heaviest known elementary particle, the top quark. The top quark was discovered at the Tevatron by the CDF and the D0 collaborations in 1995 [1]. So far, all the top quarks found are produced via the strong interaction as top-antitop pairs. The Standard Model of elementary particle physics also predicts single-top quark production via the electroweak interaction. This production mode has not yet been observed. The CDF and the D0 collaborations have set upper limits on the cross section for that process in Run I [2, 3] and improved those results in Run II [4, 5]. Single-top quark production is one of the major interests in Run II of the Tevatron as it offers several ways to test the Standard Model and to search for potential physics beyond the Standard Model. The measurement of the cross section of singly produced top quarks via the electroweak interaction offers the possibility to determine the Cabbibo-Kobayashi-Maskawa (CKM) matrix element V{sub tb} directly. The CKM matrix defines the transformation from the eigenstates of the electroweak interactions to the mass eigenstates of the quarks. V{sub tb} gives the strength of the coupling at the Wtb vertex. The single-top quark is produced at this vertex and therefore the cross section of the single-top quark production is directly proportional to |V{sub tb}|{sup 2}. In the Standard Model, three generations of quarks and the unitarity of the CKM matrix are predicted. This leads to V{sub tb} {approx} 1. Up to now, there is no possibility to measure V{sub tb} without using the assumption that there are a certain number of quark generations. Since the measurement of the cross section of single-top quark production is independent of this assumption it could verify another

  7. A Model Evaluation Data Set for the Tropical ARM Sites

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jakob, Christian

    2008-01-15

    This data set has been derived from various ARM and external data sources with the main aim of providing modelers easy access to quality controlled data for model evaluation. The data set contains highly aggregated (in time) data from a number of sources at the tropical ARM sites at Manus and Nauru. It spans the years of 1999 and 2000. The data set contains information on downward surface radiation; surface meteorology, including precipitation; atmospheric water vapor and cloud liquid water content; hydrometeor cover as a function of height; and cloud cover, cloud optical thickness and cloud top pressure information provided by the International Satellite Cloud Climatology Project (ISCCP).

  8. Hanford Waste Treatment Plant Sets Massive Protective Shield door in

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Pretreatment Facility | Department of Energy Waste Treatment Plant Sets Massive Protective Shield door in Pretreatment Facility Hanford Waste Treatment Plant Sets Massive Protective Shield door in Pretreatment Facility January 12, 2011 - 12:00pm Addthis The carbon steel doors come together to form an upside-down L-shape. The 102-ton door was set on top of the 85-ton door that was installed at the end of December. The carbon steel doors come together to form an upside-down L-shape. The

  9. A Model Evaluation Data Set for the Tropical ARM Sites

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jakob, Christian

    This data set has been derived from various ARM and external data sources with the main aim of providing modelers easy access to quality controlled data for model evaluation. The data set contains highly aggregated (in time) data from a number of sources at the tropical ARM sites at Manus and Nauru. It spans the years of 1999 and 2000. The data set contains information on downward surface radiation; surface meteorology, including precipitation; atmospheric water vapor and cloud liquid water content; hydrometeor cover as a function of height; and cloud cover, cloud optical thickness and cloud top pressure information provided by the International Satellite Cloud Climatology Project (ISCCP).

  10. Observation of Electroweak Single Top-Quark Production with the CDF II Experiment

    SciTech Connect (OSTI)

    Lueck, Jan

    2009-07-24

    predicted cross section. Therefore, the vast majority of the CDF and D0 single top-quark analyses search for the combined s- and t-channel signal, with the production ratio to be given by the SM. In Tevatron Run I, several limits on the single top-quark production cross section were set by CDF and D0, whereas in Run II, even stronger limits followed by both collaborations. Furthermore, limits on the non-SM production of single top-quarks via flavor-changing neutral currents could be obtained. The electroweak production of single top-quarks has not yet been observed up to the time of this thesis, although the D0 and shortly thereafter the CDF Collaborations found first evidence. The experimental challenge of the search for single top-quark production is the tiny expected signal beneath a large and imprecisely known amount of background processes. The relative fraction of background events is at the order of about ten times higher compared to the top-quark pair production. Consequently, the expected signal amounts to about 5% of the full candidate event sample whose background contribution is only known to a level at the order of 20%. Furthermore, the signal events themselves are expected to be not as distinct from the background as the top-quark pair production since there is only one heavy object present in the event. Thus, experimental methods like simple counting experiments are not sufficiently sensitive and the development of more sophisticated analysis techniques is required to distinguish such small signals from alike and inaccurately known background processes. Neural networks comply with those requirements. They can be used to distinguish between signal and background processes by combining the information contained in several variables into a powerful discriminant, while each variable has a rather low separation capability. The application of those neural network discriminants to collision data provide a method for the extraction of the signal fraction and its

  11. Angular correlations in top quark decays in standard model extensions

    SciTech Connect (OSTI)

    Batebi, S.; Etesami, S. M.; Mohammadi-Najafabadi, M.

    2011-03-01

    The CMS Collaboration at the CERN LHC has searched for the t-channel single top quark production using the spin correlation of the t-channel. The signal extraction and cross section measurement rely on the angular distribution of the charged lepton in the top quark decays, the angle between the charged lepton momentum and top spin in the top rest frame. The behavior of the angular distribution is a distinct slope for the t-channel single top (signal) while it is flat for the backgrounds. In this Brief Report, we investigate the contributions which this spin correlation may receive from a two-Higgs doublet model, a top-color assisted technicolor (TC2) and the noncommutative extension of the standard model.

  12. Annual Energy Outlook 2015 - Appendix A

    Annual Energy Outlook

    ... of load. 2 Includes televisions, set-top boxes, home theater systems, DVD players, and video game consoles. 3 Includes desktop and laptop computers, monitors, and networking ...

  13. News Archive | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    for metal halide lamp fixtures. December 23, 2013 U.S. Energy Department, Pay-Television Industry and Energy Efficiency Groups Announce Set-Top Box Energy Conservation...

  14. EERE News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of clean energy technologies. December 23, 2013 U.S. Energy Department, Pay-Television Industry and Energy Efficiency Groups Announce Set-Top Box Energy Conservation...

  15. Meeting Concerning Potential Test Procedures and Energy Conservation...

    Office of Environmental Management (EM)

    Concerning Potential Test Procedures and Energy Conservation Standards for Set-Top Boxes and Network Equipment Meeting Concerning Potential Test Procedures and Energy Conservation ...

  16. Loan Guarantee Recipient Awarded Top Renewable Plant | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Renewable Plant Loan Guarantee Recipient Awarded Top Renewable Plant December 16, 2015 - 10:00am Addthis Loan Guarantee Recipient Awarded Top Renewable Plant Mark A. McCall Mark A. McCall Executive Director of the Loan Programs Office The Department's Loan Programs Office (LPO) has provided financing for numerous award-winning clean energy projects. The latest is Desert Sunlight, a 550-megawatt (MW) photovoltaic (PV) solar power plant located in Riverside County, California, that was issued

  17. Low-Cost Ventilation in Production Housing - Building America Top

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Innovation | Department of Energy Low-Cost Ventilation in Production Housing - Building America Top Innovation Low-Cost Ventilation in Production Housing - Building America Top Innovation This drawing shows simple and cost-effective ventilation strategies for homes. As high-performance homes get more air tight and better insulated, attention to good indoor air quality becomes essential. This Top Innovation profile describes Building America research by Building Science Corporation to develop

  18. Building Science-Based Climate Maps - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Building Science-Based Climate Maps - Building America Top Innovation Building Science-Based Climate Maps - Building America Top Innovation Photo showing climate zone maps based on the IECC climate zone map. It may not be intuitively obvious why a U.S. climate zone map is so important to the construction industry. Thanks to this Building America Top Innovation, building science education, energy code development, and residential design can much more effectively integrate

  19. Building America Top Innovations Hall of Fame Profile - Building Energy

    Energy Savers

    Optimization Analysis Method (BEopt) | Department of Energy America Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) Building America Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) 3_3a_ba_innov_beopt_011713.pdf (877.48 KB) More Documents & Publications Building Energy Optimization Analysis Method (BEopt) - Building America Top Innovation BEopt Version 2.0: New Features Building America Webinar:

  20. Exterior Rigid Insulation Best Practices - Building America Top Innovation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Exterior Rigid Insulation Best Practices - Building America Top Innovation Exterior Rigid Insulation Best Practices - Building America Top Innovation Effec guid-exterior rigid insulation.jpg For years, Building America research teams have advocated using the thermal, air, and vapor properties of rigid foam sheathing insulation to improve walls. Several teams earned a 2013 Top Innovation award for their research into this technology. The NorthernSTAR team's

  1. 2016 Top Markets Report: Renewable Fuels | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Markets Report: Renewable Fuels 2016 Top Markets Report: Renewable Fuels Plenary IV: Policy for the Bioeconomy-Local, State, Federal, and International Perspectives 2016 Top Markets Report: Renewable Fuels Cora Dickson, Senior International Trade Specialist, U.S. Department of Commerce dickson_bioenergy_2016.pdf (1.39 MB) More Documents & Publications International Market Opportunities in Bioenergy: Leveraging U.S. Government Resources Market Drivers for Biofuels 2015 Peer Review

  2. Top Quark Pair Production Cross Section at the Tevatron

    SciTech Connect (OSTI)

    Peters, Reinhild Yvonne

    2015-09-25

    The top quark, discovered in 1995 by the CDF and D0 collaborations at the Tevatron proton antiproton collider at Fermilab, has undergone intense studies in the last 20 years. Currently, CDF and D0 converge on their measurements of top-antitop quark production cross sections using the full Tevatron data sample. In these proceedings, the latest results on inclusive and differential measurements of top-antitop quark production cross sections at the Tevatron are reported.

  3. EM Recovery Act Top Line Messages | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Line Messages EM Recovery Act Top Line Messages The latest Recovery Act performance related information and metrics. EM Recovery Act Top Line Messages - April, 2013 (1.96 MB) More Documents & Publications Workers at Hanford Site Achieve Recovery Act Legacy Cleanup Goals Ahead of Schedule Audit Report: IG-0426 Testimony of Mark Whitney Principal Deputy Assistant Secretary for Environmental Management Before the Subcommittee on Environment and the Economy House Energy and Commerce

  4. Model Simulating Real Domestic Hot Water Use - Building America Top

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Innovation | Department of Energy Model Simulating Real Domestic Hot Water Use - Building America Top Innovation Model Simulating Real Domestic Hot Water Use - Building America Top Innovation Image of a pipe insulation.jpg As progress continues with high-R, tightly sealed thermal enclosures, domestic hot water becomes an increasingly important energy use in high-performance homes. This Top Innovation describes Building America research by Alliance for Residential Building Innovation and the

  5. Cyclotron Road: Creating a Home for Top Clean Energy Technology

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Entrepreneurs within our National Laboratories | Department of Energy Cyclotron Road: Creating a Home for Top Clean Energy Technology Entrepreneurs within our National Laboratories Cyclotron Road: Creating a Home for Top Clean Energy Technology Entrepreneurs within our National Laboratories September 2, 2015 - 10:53am Addthis Cyclotron Road: Creating a Home for Top Clean Energy Technology Entrepreneurs within our National Laboratories David Danielson Former Assistant Secretary for the Office

  6. Building America 1995-2012 Top Innovations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    America 1995-2012 Top Innovations Building America 1995-2012 Top Innovations This page provides a listing of and links to legacy Building America Top Innovations developed from 1995-2012. Advanced Technologies and Practices Building Science Solutions Thermal Enclosure: Basement Insulation Systems Advanced Framing Systems and Packages Unvented, Conditioned Crawlspaces Unvented, Conditioned Attics High-R Walls Optimized Comfort Systems: Integration of HVAC System Design with Simplified Duct

  7. Building America 2013 Top Innovations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Innovations Building America 2013 Top Innovations This page provides a listing of and links to Building America Top Innovations awarded in 2013. Advanced Technologies and Practices Building Science Solutions Thermal Enclosure: Next Generation Advanced Framing Optimized Comfort Systems: Buried and Encapsulated Ducts Furnace Blower Performance Improvements High Efficiency Window Air Conditioners House-as-a-System Business Case Zero Energy Ready Single Family Homes Effective Guidance and Tools

  8. Building America 2014 Top Innovations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building America 2014 Top Innovations Building America 2014 Top Innovations This page provides a listing of and links to Building America Top Innovations awarded in 2014. Advanced Technologies and Practices BUILDING SCIENCE SOLUTIONS Thermal Enclosure: Cost-Optimized Attic Insulation Solution for Factory-Built Homes OPTIMIZED COMFORT SOLUTIONS HVAC Cabinet Air Leakage Test Method California Energy Standards Recognize the Importance of Filter Selection ASSURED HEALTH AND SAFETY ASHRAE Standard

  9. The Top Quark, Its Discovery, and Subsequent Research

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    The Top Quark, Its Discovery, and Subsequent Research Resources with Additional Information 'Ever since the existence of the bottom (or b) quark was inferred from the discovery of the Upsilon family of resonances at Fermilab in 1977, particle physicists have been on the lookout for its partner, called top (or t). The long search, which occupied experimenters at laboratories around the world, came to a successful conclusion in February 1995 with the announcement that the top quark had been

  10. Top 10 Vulnerabilities of Control Systems and Their Associated Migitations

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (2006) | Department of Energy Top 10 Vulnerabilities of Control Systems and Their Associated Migitations (2006) Top 10 Vulnerabilities of Control Systems and Their Associated Migitations (2006) This document addresses potential risks that can apply to some electricity sector organizations and provides practices that can help mitigate the risks. Each organization decides for itself the risks it can accept and the practices it deems appropriate to manage those risks. Top 10 Vulnerabilities of

  11. Tankless Gas Water Heater Performance - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Tankless Gas Water Heater Performance - Building America Top Innovation Tankless Gas Water Heater Performance - Building America Top Innovation This photo shows a hot water heater measuring device mounted on the outside of a building wall. As improved thermal enclosures dramatically reduce heating and cooling loads, the water heating load continues to grow in importance. This Top Innovations profile describes Building America field testing by IBACOS that shed light on

  12. Basement Insulation Systems - Building America Top Innovation | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Basement Insulation Systems - Building America Top Innovation Basement Insulation Systems - Building America Top Innovation This photo shows a framed basement wall with insulation in between the studs. Efficient and durable construction practices for basements are critical because basements can account for 10% to 30% of a home's total heat loss and provide significant risk of moisture problems due to extensive cold surfaces at the walls and slab. For this Top Innovation award,

  13. Dateline Los Alamos: Top science news of 2014

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Top science news of 2014 Dateline Los Alamos: Top science news of 2014 Los Alamos National Laboratory today announced its annual top science stories of 2014. December 22, 2014 Los Alamos National Laboratory postdoctoral researcher Elena Guardincerri, right, and undergraduate research assistant Shelby Fellows prepare a lead hemisphere inside a muon tomography machine, which can peer inside closed containers and provide detailed images of dense objects such as nuclear materials or other items of

  14. Unvented Crawlspace Code Adoption - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Unvented Crawlspace Code Adoption - Building America Top Innovation Unvented Crawlspace Code Adoption - Building America Top Innovation Photo of an unvented and insulated crawlspace. This Top Innovation profile describes Building America research by Building Science Corporation that helped to clarify and contribute to code requirements that allow unvented crawlspaces in new home construction. This is critical because unvented crawlspaces save energy while improving

  15. Valuing Green in the Appraisal Process - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Valuing Green in the Appraisal Process - Building America Top Innovation Valuing Green in the Appraisal Process - Building America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in identifying comparables and in supporting adjustments for improvements. These difficulties stem BARA Green Addendum Top Innov 2014-2.jpg from many reasons, including data gaps in commonly used information systems and lender

  16. 3D%20printed%20perforated%20metal%20box.jpg | OSTI, US Dept of Energy

    Office of Scientific and Technical Information (OSTI)

    Office of Scientific and Technical Information 3D%20printed%20perforated%20metal%20box

  17. Search for direct pair production of supersymmetric top quarks decaying to all-hadronic final states in pp collisions at sqrt(s) = 8 TeV

    DOE PAGES-Beta [OSTI]

    Khachatryan, Vardan; et al.

    2016-03-02

    Results are reported from a search for the pair production of top squarks, the supersymmetric partners of top quarks, in final states with jets and missing transverse momentum. The data sample used in this search was collected by the CMS detector and corresponds to an integrated luminosity of 18.9 inverse femtobarns of proton-proton collisions at a centre-of-mass energy of 8 TeV produced by the LHC. The search features novel background suppression and prediction methods, including a dedicated top quark pair reconstruction algorithm. The data are found to be in agreement with the predicted backgrounds. Exclusion limits are set in simplifiedmore » supersymmetry models with the top squark decaying to jets and an undetected neutralino, either via a top quark or through a bottom quark and chargino. Models with the top squark decaying via a top quark are excluded for top squark masses up to 755 GeV in the case of neutralino masses below 200 GeV. For decays via a chargino, top squark masses up to 620 GeV are excluded, depending on the masses of the chargino and neutralino.« less

  18. Search for direct pair production of supersymmetric top quarks decaying to all-hadronic final states in pp collisions at √s = 8 TeV

    DOE PAGES-Beta [OSTI]

    Khachatryan, Vardan

    2016-08-16

    Here, results are reported from a search for the pair production of top squarks, the supersymmetric partners of top quarks, in final states with jets and missing transverse momentum. The data sample used in this search was collected by the CMS detector and corresponds to an integrated luminosity of 18.9 fb–1 of proton-proton collisions at a centre-of-mass energy of 8 TeV produced by the LHC. The search features novel background suppression and prediction methods, including a dedicated top quark pair reconstruction algorithm. The data are found to be in agreement with the predicted backgrounds. Exclusion limits are set in simplifiedmore » supersymmetry models with the top squark decaying to jets and an undetected neutralino, either via a top quark or through a bottom quark and chargino. Models with the top squark decaying via a top quark are excluded for top squark masses up to 755 GeV in the case of neutralino masses below 200 GeV. For decays via a chargino, top squark masses up to 620 GeV are excluded, depending on the masses of the chargino and neutralino.« less

  19. TOP 10 VULNERABILITIES OF CONTROL SYSTEMS AND THEIR ASSOCIATED...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top 10 Vulnerabilities of Control Systems and Their Associated Migitations (2006) Introduction SCADA Security for Managers and Operators DOE National SCADA Test Bed Program ...

  20. EM's Top Official Celebrates 'Cocooning' of Reactor Dedicated...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Celebrates 'Cocooning' of Reactor Dedicated by President Kennedy Decades Ago EM's Top Official Celebrates 'Cocooning' of Reactor Dedicated by President Kennedy Decades Ago June 1, ...

  1. Next Generation Advanced Framing - Building America Top Innovation...

    Energy Savers

    Innovation DOE Zero Energy Ready Home Case Study: Charles Thomas Homes, Anna Model, Omaha, NE Top Innovation Categories Advanced Technologies House as a System Business Case ...

  2. NSTec tops more than $2 million in contributions to education...

    National Nuclear Security Administration (NNSA)

    tops more than 2 million in contributions to education outreach | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the...

  3. NREL's Bobi Garrett Named Top Industry Executive | Awards and...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    and partnerships at the Energy Department's National Renewable Energy Laboratory (NREL), was recognized by the Denver Business Journal as one of the region's top female...

  4. Sequoia supercomputer tops Graph 500 | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Lawrence Livermore National Laboratory scientists' search for new ways to solve large complex national security problems led to the top ranking on Graph 500 and new techniques for ...

  5. Path to Deterministic Single Donor Devices using Focused Top...

    Office of Scientific and Technical Information (OSTI)

    Path to Deterministic Single Donor Devices using Focused Top-Down Ion Implantation. Citation Details In-Document Search Title: Path to Deterministic Single Donor Devices using ...

  6. Advanced Nanofabrication of Single Donor Devices using Top-Down...

    Office of Scientific and Technical Information (OSTI)

    Advanced Nanofabrication of Single Donor Devices using Top-Down Implantation. Citation Details In-Document Search Title: Advanced Nanofabrication of Single Donor Devices using ...

  7. America's Next Top Energy Innovator Challenge | Department of...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Learn More Woodmont Enterprises LLC Oak Ridge National Laboratory 703 likes Woodmont Enterprises, based in Nashville, Tennessee, is creating a top-coat solution moisture barrier ...

  8. Sequoia ranked third in TOP500 list | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    according to the industry-standard Top500 list. Sequoia, which recently completed its transition to classified computing in support of NNSA's Stockpile Stewardship Program,...

  9. TOP AND HIGGS PHYSICS AT THE HADRON COLLIDERS

    SciTech Connect (OSTI)

    Jabeen, Shabnam

    2013-10-20

    This review summarizes the recent results for top quark and Higgs boson measurements from experiments at Tevatron, a proton–antiproton collider at a center-of-mass energy of √ s =1 . 96 TeV, and the Large Hadron Collider, a proton–proton collider at a center- of-mass energy of √ s = 7 TeV. These results include the discovery of a Higgs-like boson and measurement of its various properties, and measurements in the top quark sector, e.g. top quark mass, spin, charge asymmetry and production of single top quark.

  10. NNSA Production Office tops Feds Feed Families campaign goal...

    National Nuclear Security Administration (NNSA)

    tops Feds Feed Families campaign goal | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation...

  11. Effective Guidance and Tools - Building America Top Innovations...

    Office of Environmental Management (EM)

    High-Performance Home Metrics These Top Innovations provide key technical tools and databases for analyzing energy efficiency measures and achieving optimal savings. 1995-2012...

  12. Large Higgs energy region in Higgs associated top pair production...

    Office of Scientific and Technical Information (OSTI)

    Large Higgs energy region in Higgs associated top pair production at the Linear Collider Citation Details In-Document Search Title: Large Higgs energy region in Higgs associated ...

  13. Groundwater, Legacy Soil Cleanup and Flood Recovery Top Lab's...

    Energy.gov (indexed) [DOE]

    a legacy contaminant soil cleanup project, and rapid ... Waste and Water Top 2013 Accomplishments for Los Alamos EM ... subcontractor TerranearPMC crews to take hand-augured ...

  14. Single top production as a probe of heavy resonances | OSTI,...

    Office of Scientific and Technical Information (OSTI)

    Single top production as a probe of heavy resonances Not Available Temp HTML Storage 2: Drueke, Elizabeth; Nutter, Joseph; Schwienhorst, Reinhard; Vignaroli, Natascia; Walker, ...

  15. Valuing Green in the Appraisal Process - Building America Top...

    Energy Savers

    Valuing Green in the Appraisal Process - Building America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in ...

  16. Vision Machine & Fabrication Corp. Named Top Small Business Subcontrac...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Vision Machine & Fabrication Corp. Named Top Small Business Subcontractor at Jefferson Lab for FY 2014 NEWPORT NEWS, VA, Sept. 10, 2015 - Jefferson Science Associates, the...

  17. NREL Staff Recognized for Top Innovations as Lab Celebrates Record...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Staff Recognized for Top Innovations as Lab Celebrates Record Patent Year DOE EERE Assistant Secretary David Danielson highlights "innovation culture" of national labs May 7, 2015 ...

  18. Westinghouse earns top award from quality new mexico

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Earns Top Award From Quality New Mexico CARLSBAD, N.M., January 11, 2000 - The Westinghouse Waste Isolation Division led a group of three Carlsbad organizations recognized by...

  19. Top Low- or No-Cost Improvements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Low- or No-Cost Improvements Top Low- or No-Cost Improvements This presentation describes the top low- or no-cost projects to improve energy efficiency as identified in energy assessments performed by DOE and by the Industrial Assessment Centers. Top Low- or No-Cost Improvements (April 2, 2009) (1.94 MB) More Documents & Publications Energy Assessments FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System Energy-Reduction Goals with a Three-Phased Strategy Save Energy Now in Your

  20. ESnet Named One of Top Government IT Innovators -- Again

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ESnet Named One of Top Government IT Innovators - Again News & Publications ESnet News Media & Press Publications and Presentations Galleries ESnet Awards and Honors Contact Us...

  1. The Business Case for Fuel Cells 2011: Energizing America's Top...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Business Case for Fuel Cells 2011: Energizing America's Top Companies November 2011 i ... Jennifer Gangi, and Sandra Curtin of Fuel Cells 2000, an activity of Breakthrough ...

  2. Secretary Chu Recognizes America's Next Top Energy Innovators...

    Office of Environmental Management (EM)

    ... View a video on the startup's technology here. Addthis Related Articles The America's Next Top Energy Innovator Challenge makes inventions and technologies developed at the U.S. ...

  3. Help Choose America's Next Top Energy Innovator | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Choose America's Next Top Energy Innovator Help Choose America's Next Top Energy Innovator January 26, 2012 - 9:00am Addthis The America’s Next Top Energy Innovator Challenge, a part of the Startup America initiative, makes it easier for start-ups to use inventions and technologies developed at the U.S. Department of Energy’s 17 National Laboratories and the Y-12 National Security Complex. | Photo courtesy of National Renewable Energy Laboratory. The America's Next Top Energy Innovator

  4. Northwest public utilities, BPA top five-year energy savings...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Northwest-public-utilities-BPA-top-five-year-energy-savings-target Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects &...

  5. Top Solar Technology Co Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Manufacturer of PV module connector systems and conductive aluminium paste for PV cells. References: Top Solar Technology Co Ltd1 This article is a stub. You can help...

  6. Building America Solution Center - Building America Top Innovation...

    Energy Savers

    Building America Solution Center - Building America Top Innovation SCimagemale.jpg The Building America Solution Center is a Web-based tool connecting users to fast, free, and ...

  7. ChemLabBox for SnifferStars

    Energy Science and Technology Software Center (OSTI)

    2002-01-24

    The software entitled "ChemLabBox for SnifferStars" is used to collect, display, and save data from the Sandia National Laboratories chemical analysis system dubbed SnifferStar. Sensor data is streamed from a SnifferStar unit into a computer thru RS-232 in a manner that is not amendable to plotting. Also, there is no direct way to start and stop the unit as is. This software rearranges the data into something that can be easily plotted in real-time thenmore » saves the data into a text fild. In addition, this software provides the users a means to start and stop the hardware. This software was written specifically for SnifferStar. SnifferStar data is delivered at a very fast rate but for a short period of time. This software is written around that premise. It is written for Pentium or higher machines running Windows 95/98/ME/NT/2000/XP. Lockheed Martin is interested in using it for testing SnifferStar units before deployment. To date they have not indicated their intent to deliver the code either in part or whole as part of their product.« less

  8. WHAT'S INSIDE THE BLACK BOX - EXPLAINING PERFORMANCE ASSESSMENT TO STAKEHOLDERS

    SciTech Connect (OSTI)

    Seitz, R; Elmer Wilhite, E

    2009-01-06

    The performance assessment (PA) process is being applied to support an increasing variety of waste management decisions that involve the whole spectrum of stakeholders. As with many technical tools, the PA process can be seen as a black box, which can be difficult to understand when implemented. Recognizing the increasing use of PA and the concerns about difficulties with understanding, the Savannah River Site Citizens Advisory Board (CAB) made a recommendation that the U.S. Department of Energy (DOE) provide a Public Educational Forum on PAs. The DOE-Headquarters Environmental Management (DOE-EM) Office of Compliance and the DOE-Savannah River (DOE-SR) responded to this recommendation by supporting the Savannah River National Laboratory (SRNL) in developing several presentation modules that can be used to describe different aspects of the PA process. For the Public Educational Forum, the PA modules were combined with presentations on DOE perspectives, historical modeling efforts at the Savannah River Site, and review perspectives from the U.S. Nuclear Regulatory Commission (NRC). The overall goals are to help the public understand how PAs are implemented and the rigor that is applied, and to provide insight into the use of PAs for waste management decision-making.

  9. Electrical wiring box with structure for fast device mounting

    DOE Patents [OSTI]

    Johnston, Earl S.

    1991-01-08

    An electrical wiring box of molded insulating material is provided with bosses having screw holes for receiving a mounting screw that include two colinear portions of which a first portion proximate the front surface has an internal configuration, such as molded threads, that engage the mounting screw while permitting the mounting screw to be manually inserted therethrough without turning because of flexibility built into the boss structure. A second portion of the screw hole is of greater restriction for securely engaging the screw such as by self tapping. The flexibility of the boss is provided by a first center slot that extends from the screw hole to the boss exterior over a length substantially equal to the first portion of the screw hole. Second and third slots are located respectively on each side of the screw hole and provide projections respectively between the first and second slots and the first and third slots that flex to allow easy screw insertion through the first portion of the screw hole.

  10. Top-down and bottom-up definitions of human failure events in human reliability analysis

    SciTech Connect (OSTI)

    Boring, Ronald Laurids

    2014-10-01

    In the probabilistic risk assessments (PRAs) used in the nuclear industry, human failure events (HFEs) are determined as a subset of hardware failures, namely those hardware failures that could be triggered by human action or inaction. This approach is top-down, starting with hardware faults and deducing human contributions to those faults. Elsewhere, more traditionally human factors driven approaches would tend to look at opportunities for human errors first in a task analysis and then identify which of those errors is risk significant. The intersection of top-down and bottom-up approaches to defining HFEs has not been carefully studied. Ideally, both approaches should arrive at the same set of HFEs. This question is crucial, however, as human reliability analysis (HRA) methods are generalized to new domains like oil and gas. The HFEs used in nuclear PRAs tend to be top-down—defined as a subset of the PRA—whereas the HFEs used in petroleum quantitative risk assessments (QRAs) often tend to be bottom-up—derived from a task analysis conducted by human factors experts. The marriage of these approaches is necessary in order to ensure that HRA methods developed for top-down HFEs are also sufficient for bottom-up applications.

  11. METHODOLOGY FOR THE NUMBER OF FILTERS NEEDED IN A WASTE BOX

    SciTech Connect (OSTI)

    MARUSICH, R.M.

    2007-05-17

    Waste in large waste boxes can generate volatile organic compounds (VOCs) and hydrogen. These waste boxes may or may not have flow paths out of them (although it is believed that most do). These boxes will be retrieved, sampled, and then coated with polyurea. After coating, filters will be installed in the box to keep the concentration of VOCs and hydrogen acceptably low. The MDSA requires that a vent path must be protected during application of the polyurea coating. If the box has been sampled then it is vented and the vent path must be protected. This report provides a model in which the user inputs the free volume of the waste box, sample concentration (ppm of total VOC or volume fraction hydrogen) along with the number of filters to be placed into the waste box lid. Using this information, the model provides an estimate of concentration vs. time or the number of filters needed to reduce the concentration by a specified fraction. If the equations from this report are placed into spreadsheets which are then used to demonstrate TSR compliance, the spreadsheets must come under the Software QA Plan for such documents. Chapters 2 and 3 present the theory. Chapter 4 presents the method with examples of its use found in Chapter 5. Chapter 6 provides the basis far the use of 1,000 ppm as the concentration below which the method is valid under any condition.

  12. Regulating the ethylene response of a plant by modulation of F-box proteins

    DOE Patents [OSTI]

    Guo, Hongwei [Beijing, CN; Ecker, Joseph R [Carlsbad, CA

    2014-01-07

    The relationship between F-box proteins and proteins invovled in the ethylene response in plants is described. In particular, F-box proteins may bind to proteins involved in the ethylene response and target them for degradation by the ubiquitin/proteasome pathway. The transcription factor EIN3 is a key transcription factor mediating ethylne-regulated gene expression and morphological responses. EIN3 is degraded through a ubiquitin/proteasome pathway mediated by F-box proteins EBF1 and EBF2. The link between F-box proteins and the ethylene response is a key step in modulating or regulating the response of a plant to ethylene. Described herein are transgenic plants having an altered sensitivity to ethylene, and methods for making transgenic plant haing an althered sensitivity to ethylene by modulating the level of activity of F-box proteins. Methods of altering the ethylene response in a plant by modulating the activity or expression of an F-box protein are described. Also described are methods of identifying compounds that modulate the ethylene response in plants by modulating the level of F-box protein expression or activity.

  13. Fuel Economy and Emissions Effects of Low Tire Pressure, Open Windows, Roof Top and Hitch-Mounted Cargo, and Trailer

    SciTech Connect (OSTI)

    Thomas, John F; Huff, Shean P; West, Brian H

    2014-01-01

    To quantify the fuel economy (FE) effect of some common vehicle accessories or alterations, a compact passenger sedan and a sport utility vehicle (SUV) were subjected to SAE J2263 coastdown procedures. Coastdowns were conducted with low tire pressure, all windows open, with a roof top or hitch-mounted cargo carrier, and with the SUV pulling an enclosed cargo trailer. From these coastdowns, vehicle dynamometer coefficients were developed which enabled the execution of vehicle dynamometer experiments to determine the effect of these changes on vehicle FE and emissions over standard drive cycles and at steady highway speeds. The FE penalty associated with the rooftop cargo box mounted on the compact sedan was as high as 25-27% at higher speeds, where the aerodynamic drag is most pronounced. For both vehicles, use of a hitch mounted cargo tray carrying a similar load resulted in very small FE penalties, unlike the rooftop cargo box. The results for the SUV pulling a 3500 pound enclosed cargo trailer were rather dramatic, resulting in FE penalties ranging from 30%, for the city cycle, to 50% at 80 mph, at which point significant CO generation indicated protective enrichment due to high load. Low tire pressure cases resulted in negligible to 10% FE penalty depending on the specific case and test point. Driving with all four windows open decreased FE by 4-8.5% for the compact sedan, and 1-4% for the SUV.

  14. EERE Success Story-NREL Partners with Google in Little Box Challenge |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Partners with Google in Little Box Challenge EERE Success Story-NREL Partners with Google in Little Box Challenge March 21, 2016 - 12:40pm Addthis Photo Courtesy | CET+Power Photo Courtesy | CET+Power Last month, Google and the Institute of Electrical and Electronics Engineers (IEEE) announced Belgium's Red Electrical Devils (a team from CE+T Power) as the winner of the Little Box Challenge, a competition to invent smaller, more efficient inverters that connect solar

  15. Regulating the ethylene response of a plant by modulation of F-box proteins

    SciTech Connect (OSTI)

    Guo, Hongwei; Ecker, Joseph R.

    2011-03-08

    The invention relates to transgenic plants having reduced sensitivity to ethylene as a result of having a recombinant nucleic acid encoding an F-box protein that interacts with a EIN3 involved in an ethylene response of plants, and a method of producing a transgenic plant with reduced ethylene sensitivity by transforming the plant with a nucleic acid sequence encoding an F-box protein. The inventions also relates to methods of altering the ethylene response in a plant by modulating the activity or expression of an F-box protein.

  16. Study on the top quark pair production mechanism in 1.96 TeV proton-antiproton collisions

    SciTech Connect (OSTI)

    Naganoma, Junji; /Waseda U.

    2008-03-01

    The study of the top quark pair production mechanism in proton-antiproton collisions at a center-of-mass energy of 1.96 TeV is described. The main subjects are the measurements of the top quark pair production cross section, the top quark mass and a search for a new particle decaying to the top quark pair. The analyses are based on 1.9 fb{sup -1} of data collected by the Collider Detector at Fermilab (CDF) Run II experiment between March 2002 and May 2007, using the lepton+jets events. The measured top quark pair production cross section is 8.2 {+-} 0.5 (stat.) {+-} 0.8 (syst.) {+-} 0.5 (lum.) pb, which is slightly higher than the standard model prediction at the top mass of 175 GeV/c{sup 2}. The top quark mass is an important parameter in the standard model, and also in the experimental studies. The measured top quark mass if 171.6 {+-} 2.0 (stat.) {+-} 1.3(syst.) GeV/c{sup 2}. Finally, they report on a search for a new gauge boson decaying to t{bar t}, which interferes with the standard model gluon in the q{bar q} {yields} t{bar t} production process. They call such a hypothetical particle a 'Massive Gluon'. The observed t{bar t} invariant mass distribution is consistent with the standard model expectations, and also the measured massive gluon coupling strength with quarks is consistent within a statistical fluctuation of the standard model expectation in the wide range of the massive gluon masses and widths. They set the upper and lower limits on the coupling strength of the massive gluon.

  17. Building America Top Innovations 2012: Advanced Framing Systems and Packages

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research showing advanced 2x6, 24-inch on-center framing, single top plates, open headers, and 2-stud corners reduced board feet of lumber by more than 1,000 feet, cut energy use by 13%, and cut material and labor costs by more than $1,000 on a typical home.

  18. Proposed Junction-Box Stress Test (Using an Added Weight) for Use During the Module Qualification (Presentation)

    SciTech Connect (OSTI)

    Miller, D. C.; Wohlgemuth, J. H.; Kurtz, S. R.

    2012-02-01

    Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development. Furthermore, there are historical incidences of adverse effects (e.g., fires) caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp heat' IEC qualification test is proposed to verify the basic robustness of the j-box adhesion system. The details of the proposed test are described, in addition to the preliminary results conducted using representative materials and components.

  19. Structural Analysis for Subsidence of Stacked B-25 Boxes

    SciTech Connect (OSTI)

    Jones, W.E.

    2003-06-25

    The Savannah River Site (SRS) and other U.S. Department of Energy (DOE) sites use shallow land burial facilities (i.e., trenches) to dispose low-level radioactive waste. However, at SRS and other DOE sites, waste containers with up to 90 percent void space are disposed in the shallow land burial facilities. Corrosion and degradation of these containers can result in significant subsidence over time, which can compromise the integrity of the long-term cover. This in turn can lead to increased water infiltration through the long-term cover into the waste and subsequent increased radionuclide transport into the environment. Understanding and predicting shallow-buried, low-level waste subsidence behavior is necessary for evaluating cost-effective and appropriate stabilization required to maintain cover system long-term stability and viability, and to obtain stakeholder acceptance of the long-term implications of waste disposal practices. Two methods (dynamic compaction and static surcharge) have been used at SRS to accelerate waste and container consolidation and reduce potential subsidence prior to long term cover construction. Dynamic compaction comprises repeatedly dropping a heavy (20 ton) weight from about a 40-ft height to consolidate the waste and containers. Static surcharge is the use of a thick (15 ft to 30 ft) soil cover to consolidate the underlying materials over a longer time period (three to six months in this case). Quasi-static modeling of a stack of four B-25 boxes at various stags of corrosion with an applied static surcharge has been conducted and is presented herein.

  20. Measurements of the Top Quark at the Tevatron Collider

    SciTech Connect (OSTI)

    Cerrito, Lucio

    2007-01-01

    The authors present recent preliminary measurements of the top-antitop pair production cross section and determinations of the top quark pole mass, performed using the data collected by the CDF and D0 Collaborations at the Tevatron Collider. In the lepton plus jets final state, with semileptonic B decay, the pair production cross section has now been measured at CDF using {approx} 760 pb{sup -1} of proton-antiproton collisions at a center-of-mass energy of {radical}s = 1.96 TeV. A measurement of the production cross section has also been made with {approx} 1 fb{sup -1} of data in the all-jets final state by the CDF Collaboration. The mass of the top quark has now been measured using {approx} 1 fb{sup -1} of collision data using all decay channels of the top quark pair, yielding the most precise measurements of the top mass to date.

  1. Carlsbad Field Orfice P. O. Box 3090 Carlsbad, New Mexico 88221

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Orfice P. O. Box 3090 Carlsbad, New Mexico 88221 APR 2 4 2 012 Mr. John Kieling , Acting Bureau Chief Hazardous Waste Bureau New Mexico Environment Department 2905 Rodeo Park Drive...

  2. Workers Remove Glove Boxes from Ventilation at Hanford’s Plutonium Finishing Plant

    Energy.gov [DOE]

    An employee at Hanford’s Plutonium Finishing Plant uses a portable band saw to cut the last ventilation duct attached to glove boxes inside the facility’s former processing area.

  3. From Oak Ridge to the Moon (Y-12 Moon Box) | Y-12 National Security...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    From Oak Ridge to the Moon ... From Oak Ridge to the Moon (Y-12 Moon Box) The mp4 video format is not supported by this browser. Download video Captions: On Time: 5:26 min. Y-12...

  4. Dorothy Riehle FOIA Office U.S. Department of Energy P. O. Box...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    6, 2012 Dorothy Riehle FOIA Office U.S. Department of Energy P. O. Box 550 Richland, WA 99352 Re: FOIA Request Dear Ms. Riehle: Pursuant to the Freedom of Information Act (5...

  5. Dorothy Riehle FOIA Office U.S. Department of Energy P. O. Box...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    4, 2013 Dorothy Riehle FOIA Office U.S. Department of Energy P. O. Box 550 Richland, WA 99352 Re: FOIA RequestTWINS database Dear Ms. Riehle: Pursuant to the Freedom of...

  6. Dorothy Riehle FOIA Office U.S. Department of Energy P. O. Box...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    December 1, 2014 Dorothy Riehle FOIA Office U.S. Department of Energy P. O. Box 550 Richland, WA 99352 Re: FOIA Request Dear Ms. Riehle: Pursuant to the Freedom of Information Act...

  7. Dorothy Riehle FOIA Office U.S. Department of Energy P. O. Box...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    8, 2014 Dorothy Riehle FOIA Office U.S. Department of Energy P. O. Box 550 Richland, WA 99352 Re: FOIA RequestWaste Treatment Plant Dear Ms. Riehle: Pursuant to the Freedom of...

  8. A search for the lightest supersymmetric partner of the top quark at DØ

    SciTech Connect (OSTI)

    Mackin Jr, Dennis S.

    2010-08-01

    We report the result of a search for the pair production of the lightest supersymmetric partner of the top quark ($\\tilde{t}$1) in 5.4 ± 0.3 fb-1 of data from the D0 detector at a p$\\bar{p}$ center-of-mass energy of 1.96 TeV at the Fermilab Tevatron collider. The scalar top quarks are assumed to decay into a b quark, a charged lepton and a scalar neutrino ($\\tilde{v}$), and the search is performed in the electron plus muon final state. No significant excess of events above the standard model prediction is detected and new exclusion limits at the 95% C.L. are set for a portion of the (m$\\tilde{t}$1, m $\\tilde{v}$) mass plane.

  9. Search for pair production of the scalar top quark in the electron+muon final state

    SciTech Connect (OSTI)

    Abazov, V.M.; Abbott, B.; Abolins, M.; Acharya, B.S.; Adams, M.; Adams, T.; Alexeev, G.D.; Alkhazov, G.; Altona, A.; Alverson, G.; Alves, G.A.

    2010-09-01

    We report the result of a search for the pair production of the lightest supersymmetric partner of the top quark ({tilde t}{sub 1}) in p{bar p} collisions at a center-of-mass energy of 1.96 TeV at the Fermilab Tevatron collider corresponding to an integrated luminosity of 5.4 fb{sup -1}. The scalar top quarks are assumed to decay into a b quark, a charged lepton, and a scalar neutrino ({tilde {nu}}), and the search is performed in the electron plus muon final state. No significant excess of events above the standard model prediction is detected, and improved exclusion limits at the 95% C.L. are set in the (M{sub {tilde t}{sub 1}}, M{sub {tilde {nu}}}) mass plane.

  10. Letter box line blackener for the HDTV/conventional-analog hybrid system

    DOE Patents [OSTI]

    Wysocki, Frederick J.; Nickel, George H.

    2006-07-18

    A blackener for letter box lines associated with a HDTV/conventional-analog hybrid television transmission where the blackener counts horizontal sync pulses contained in the HDTV/conventional-analog hybrid television transmission and determines when the HDTV/conventional-analog hybrid television transmission is in letter-box lines: if it is, then the blackener sends substitute black signal to an output; and if it is not, then the blackener sends the HDTV/conventional-analog hybrid television transmission to the output.

  11. Think Outside the Box During Our Open Data by Design Contest | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Think Outside the Box During Our Open Data by Design Contest Think Outside the Box During Our Open Data by Design Contest June 9, 2014 - 9:38am Addthis Researchers at the National Renewables Energy Laboratory get creative with data with a virtual wind tunnel. | Photo courtesy of the Energy Department. Researchers at the National Renewables Energy Laboratory get creative with data with a virtual wind tunnel. | Photo courtesy of the Energy Department. Patricia A. Hoffman Patricia A.

  12. Hanford Site Assessment & Characterization/Verification of Structures & Conex Boxes Procedure

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    4 Revision 1 Hanford Site Assessment & Characterization/Verification of Structures & Conex Boxes Procedure Prepared for the U.S. Department of Energy Assistant Secretary for Environmental Management Approved for Public Release; Further Dissemination Unlimited DOE-0342-004, Rev. 1 Hanford Site Wide Assessment & Characterization/Verification of Structures & Conex Boxes Procedure Published Date: 09/08/15 Effective Date: 09/25/15 ii CHANGE SUMMARY Rev # Date - Section Changed Change

  13. USDOE Top-of-Rail Lubricant Project

    SciTech Connect (OSTI)

    Mohumad F. Alzoubi; George R. Fenske; Robert A. Erck; Amrit S. Boparai

    2002-02-01

    Lubrication of wheel/rail systems has been recognized for the last two decades as a very important issue for railroads. Energy savings and less friction and wear can be realized if a lubricant can be used at the wheel/rail interface. On the other hand, adverse influences are seen in operating and wear conditions if improper or excessive lubrication is used. Also, inefficiencies in lubrication need to be avoided for economic and environmental reasons. The top-of-rail (TOR) lubricant concept was developed by Texaco Corporation to lubricate wheels and rails effectively and efficiently. Tranergy Corporation has been developing its SENTRAEN 2000{trademark} lubrication system for the last ten years, and this revolutionary new high-tech on-board rail lubrication system promises to dramatically improve the energy efficiency, performance, safety, and track environment of railroads. The system is fully computer-controlled and ensures that all of the lubricant is consumed as the end of the train passes. Lubricant quantity dispensed is a function of grade, speed, curve, and axle load. Tranergy also has its LA4000{trademark} wheel and rail simulator, a lubrication and traction testing apparatus. The primary task of this project was collecting and analyzing the volatile and semivolatile compounds produced as the lubricant was used. The volatile organic compounds were collected by Carbotrap cartridges and analyzed by adsorption and gas chromatography/mass spectrometry (GC/MS). The semivolatile fraction was obtained by collecting liquid that dripped from the test wheel. The collected material was also analyzed by GC/MS. Both of these analyses were qualitative. The results indicated that in the volatile fraction, the only compounds on the Environmental Protection Agency's (EPA) Superfund List of Analytes detected were contaminants either in the room air or from other potential contamination sources in the laboratory. Similarly, in the semivolatile fraction none of the detected

  14. Energy-Efficient and Secure S-Box circuit using Symmetric Pass Gate Adiabatic Logic

    SciTech Connect (OSTI)

    Kumar, Dinesh; Mohammad, Azhar; Singh, Vijay; Perumalla, Kalyan S

    2016-01-01

    Differential Power Analysis (DPA) attack is considered to be a main threat while designing cryptographic processors. In cryptographic algorithms like DES and AES, S-Box is used to indeterminate the relationship between the keys and the cipher texts. However, S-box is prone to DPA attack due to its high power consumption. In this paper, we are implementing an energy-efficient 8-bit S-Box circuit using our proposed Symmetric Pass Gate Adiabatic Logic (SPGAL). SPGAL is energy-efficient as compared to the existing DPAresistant adiabatic and non-adiabatic logic families. SPGAL is energy-efficient due to reduction of non-adiabatic loss during the evaluate phase of the outputs. Further, the S-Box circuit implemented using SPGAL is resistant to DPA attacks. The results are verified through SPICE simulations in 180nm technology. SPICE simulations show that the SPGAL based S-Box circuit saves upto 92% and 67% of energy as compared to the conventional CMOS and Secured Quasi-Adiabatic Logic (SQAL) based S-Box circuit. From the simulation results, it is evident that the SPGAL based circuits are energy-efficient as compared to the existing DPAresistant adiabatic and non-adiabatic logic families. In nutshell, SPGAL based gates can be used to build secure hardware for lowpower portable electronic devices and Internet-of-Things (IoT) based electronic devices.

  15. Tool setting device

    DOE Patents [OSTI]

    Brown, Raymond J.

    1977-01-01

    The present invention relates to a tool setting device for use with numerically controlled machine tools, such as lathes and milling machines. A reference position of the machine tool relative to the workpiece along both the X and Y axes is utilized by the control circuit for driving the tool through its program. This reference position is determined for both axes by displacing a single linear variable displacement transducer (LVDT) with the machine tool through a T-shaped pivotal bar. The use of the T-shaped bar allows the cutting tool to be moved sequentially in the X or Y direction for indicating the actual position of the machine tool relative to the predetermined desired position in the numerical control circuit by using a single LVDT.

  16. SHM Data Sets and Software

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    SHM Data Sets and Software SHM Data Sets and Software SHM Data Sets and Software Contact Institute Director Charles Farrar (505) 665-0860 Email UCSD EI Director Michael Todd (858) ...

  17. Combination of searches for anomalous top quark couplings with 5.4 fb(-1) of p(p)over-bar collisions

    SciTech Connect (OSTI)

    Abazov V. M.; Abbott, B.; Acharya, B. S.; Adams, M.; Adams, T.; Alexeev, G. D.; Alkhazov, G.; Alton, A.; Alverson, G.; Aoki, M.; Askew, A.; Atkins, S.; Augsten, K.; Avila, C.; Badaud, F.; Bagby, L.; Baldin, B.; Bandurin, D. V.; Banerjee, S.; Barberis, E.; Baringer, P.; Barreto, J.; Bartlett, J. F.; Bassler, U.; Bazterra, V.; Bean, A.; Begalli, M.; Bellantoni, L.; Beri, S. B.; Bernardi, G.; Bernhard, R.; Bertram, I.; Besancon, M.; Beuselinck, R.; Bezzubov, V. A.; Bhat, P. C.; Bhatia, S.; Bhatnagar, V.; Blazey, G.; Blessing, S.; Bloom, K.; Boehnlein, A.; Boline, D.; Boos, E. E.; Borissov, G.; Bose, T.; Brandt, A.; Brandt, O.; Brock, R.; Brooijmans, G.; Bross, A.; Brown, D.; Brown, J.; Bu, X. B.; Buehler, M.; Buescher, V.; Bunichev, V.; Burdin, S.; Buszello, C. P.; Camacho-Perez, E.; Casey, B. C. K.; Castilla-Valdez, H.; Caughron, S.; Chakrabarti, S.; Chakraborty, D.; Chan, K. M.; Chandra, A.; Chapon, E.; Chen, G.; Chevalier-Thery, S.; Cho, D. K.; Cho, S. W.; Choi, S.; Choudhary, B.; Cihangir, S.; Claes, D.; Clutter, J.; Cooke, M.; Cooper, W. E.; Corcoran, M.; Couderc, F.; Cousinou, M. -C.; Croc, A.; Cutts, D.; Das, A.; Davies, G.; de Jong, S. J.; De La Cruz-Burelo, E.; Deliot, F.; Demina, R.; Denisov, D.; Denisov, S. P.; Desai, S.; Deterre, C.; DeVaughan, K.; Diehl, H. T.; Diesburg, M.; Ding, P. F.; Dominguez, A.; Dubey, A.; Dudko, L. V.; Duggan, D.; Duperrin, A.; Dutt, S.; Dyshkant, A.; Eads, M.; Edmunds, D.; Ellison, J.; Elvira, V. D.; Enari, Y.; Evans, H.; Evdokimov, A.; Evdokimov, V. N.; Facini, G.; Feng, L.; Ferbel, T.; Fiedler, F.; Filthaut, F.; Fisher, W.; Fisk, H. E.; Fortner, M.; Fox, H.; Fuess, S.; Garcia-Bellido, A.; Garcia-Gonzalez, J. A.; Garcia-Guerra, G. A.; Gavrilov, V.; Gay, P.; Geng, W.; Gerbaudo, D.; Gerber, C. E.; Gershtein, Y.; Ginther, G.; Golovanov, G.; Goussiou, A.; Grannis, P. D.; Greder, S.; Greenlee, H.; Grenier, G.; Gris, Ph; Grivaz, J-F; Grohsjean, A.; Gruenendahl, S.; Gruenewald, M. W.; Guillemin, T.; Gutierrez, G.; Gutierrez, P.; Haas, A.; Hagopian, S.; Haley, J.; Han, L.; Harder, K.; Harel, A.; Hauptman, J. M.; Hays, J.; Head, T.; Hebbeker, T.; Hedin, D.; Hegab, H.; Heinson, A. P.; Heintz, U.; Hensel, C.; Heredia-De La Cruz, I.; Herner, K.; Hesketh, G.; Hildreth, M. D.; Hirosky, R.; Hoang, T.; Hobbs, J. D.; Hoeneisen, B.; Hohlfeld, M.; Howley, I.; Hubacek, Z.; Hynek, V.; Lashvili, I.; Ilchenko, Y.; Illingworth, R.; Ito, A. S.; Jabeen, S.; Jaffe, M.; Jayasinghe, A.; Jesik, R.; Johns, K.; Johnson, E.; Johnson, M.; Jonckheere, A.; Jonsson, P.; Joshi, J.; Jung, A. W.; Juste, A.; Kaadze, K.; Kajfasz, E.; Karmanov, D.; Kasper, P. A.; Katsanos, I.; Kehoe, R.; Kermiche, S.; Khalatyan, N.; Khanov, A.; Kharchilava, A.; Kharzheev, Y. N.; Kiselevich, I.; Kohli, J. M.; Kozelov, A. V.; Kraus, J.; Kulikov, S.; Kumar, A.; Kupco, A.; Kurca, T.; Kuzmin, V. A.; Lammers, S.; Landsberg, G.; Lebrun, P.; Lee, H. S.; Lee, S. W.; Lee, W. M.; Lellouch, J.; Li, H.; Li, L.; Li, Q. Z.; Lim, J. K.; Lincoln, D.; Linnemann, J.; Lipaev, V. V.; Lipton, R.; Liu, H.; Liu, Y.; Lobodenko, A.; Lokajicek, M.; de Sa, R. Lopes; Lubatti, H. J.; Luna-Garcia, R.; Lyon, A. L.; Maciel, A. K. A.; Madar, R.; Magana-Villalba, R.; Malik, S.; Malyshev, V. L.; Maravin, Y.; Martinez-Ortega, J.; McCarthy, R.; McGivern, C. L.; Meijer, M. M.; Melnitchouk, A.; Menezes, D.; Mercadante, P. G.; Merkin, M.; Meyer, A.; Meyer, J.; et al.

    2012-07-09

    We present measurements of the tWb coupling form factors using information from electroweak single top quark production and from the helicity of W bosons from top quark decays in t{bar t} events. We set upper limits on anomalous tWb coupling form factors using data collected with the D0 detector at the Tevatron p{bar p} collider corresponding to an integrated luminosity of 5.4 fb{sup -1}.

  18. Jefferson Lab's Newest Cluster Makes Top500 List of Fastest

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Supercomputers | Jefferson Lab Newest Cluster Makes Top500 List of Fastest Supercomputers Jefferson Lab's Newest Cluster Makes Top500 List of Fastest Supercomputers NEWPORT NEWS, VA, November 16, 2016 - For the third time in its history, Thomas Jefferson National Accelerator Facility is home to one of the world's 500 fastest supercomputers. The SciPhi-XVI supercomputer was just listed as a TOP500 Supercomputer Site on November 14, placing 397th on the 48th edition of the list of the world's

  19. Constraints on anomalous top quark couplings at the LHC

    SciTech Connect (OSTI)

    Rizzo, T.G.

    1996-09-01

    Measurements of distributions associated with the pair production of top quarks at the LHC can be used to constrain (or observe) the anomalous chromomagnetic dipole moment(k) of the top. For example, using either the tt(bar) invariant mass or the Pt distribution of top we find that sensitivities to ; k; of order 0.05 are obtainable with 100 /fb of integrated luminosity. This is similar in magnitude to what can be obtained at a 500 GeV NLC with an integrated luminosity of 50 /fb through an examination of the e(+)e(-) right arrow tt(bar)g process.

  20. Observation of $t$-channel electroweak top quark production

    SciTech Connect (OSTI)

    Triplett, Nathan; /Iowa State U.

    2011-04-01

    The top quark is the heaviest known fundamental particle, with a mass of 172.0{sub -1.3}{sup +0.9}GeV. This is nearly twice the mass of the second heaviest known particle, the Z boson, and roughly the mass of a gold atom. Because of its unusually large mass, studying the top quark may provide insight into the Higgs mechanism and other beyond the standard model physics. Only two accelerators in the world are powerful enough to produce top quarks. The Tevatron, which first accelerated protons in 1983, has produced almost 400,000 top quarks, roughly half at each of its two detectors: DO and CDF. The LHC is a much newer accelerator which currently has accumulated about 0.5% as much data as the Tevatron. However, when running at full luminosity, the LHC is capable of producing a top quark about once every second and will quickly surpass the Tevatron as the leading producer of top quarks. This analysis uses data from the D0 detector at the Tevatron, which are described in chapter 3. Top quarks are produced most often in pairs of top and anti-top quarks through an interaction of the strong force. This production mode was first observed in 1995 at the Tevatron. However, top quarks can also be produced though an electroweak interaction, which produces just one top quark. This production mode was first observed at the Tevatron in 2008. Single top quark production can occur in different channels. In this analysis, a measurement of the cross section of the t-channel production mode is performed. This measurement uses 5.4 fb{sup -1} of data and uses the technique of boosted decision trees in order to separate signal from background events. The t-channel cross section is measured to be: {sigma}(p{bar p} {yields} tqb + X) = 3.03{sub -0.66}{sup +0.78}pb (0.0.1). Additional cross section measurements were also performed for the s-channel as well as the s + t-channel. The measurement of each one of these three cross sections was repeated three times using different techniques, and

  1. Top quark production and properties at the Tevatron

    SciTech Connect (OSTI)

    Fiedler, Frank; /Munich U.

    2005-06-01

    The precise measurement of top quark production and properties is one of the primary goals of the Tevatron during Run II. The total t{bar t} production cross-section has been measured in a large variety of decay channels and using different selection criteria. Results from differential cross-section measurements and searches for new physics in t{bar t} production and top quark decays are available. Electroweak production of single top quarks has been searched for. The results from all these analyses, using typically 200 pb{sup -1} of data, are presented.

  2. Measurements of top quark production and properties at the Tevatron

    SciTech Connect (OSTI)

    Bartos, P.

    2014-09-15

    In this letter, we summarize the latest results of the top-quark production and properties at the Tevatron. We do not include results of the top-quark mass and single top-quark production as they were presented in separate talks. The results of the measurements are mostly consistent with the standard-model predictions. However, by looking at the production asymmetry measured by CDF, one can see a discrepancy in both, $t\\bar{t}$ inclusive and lepton-based measurements. D\\O\\ results of production asymmetry are compatible with the standard-model predictions as well as with the CDF results.

  3. Top quark and SUSY (supersymmetric) searches at CDF

    SciTech Connect (OSTI)

    Yeh, G.P.

    1990-05-17

    Searches for the top quark in p{bar p} collisions at {radical}s = 1.8 TeV are described. The analyses are based on data with an integrated luminosity of 4.4 pb{sup {minus}1} recorded with the Collider Detector at Fermilab in the 1988--1989 run. An upper limit on the t{bar t} cross section is obtained. The top quark with mass below 89 GeV/c{sup 2} is excluded at the 95% CL. Prospects for searches for the top quark in the future are presented. We also briefly present results on searches for supersymmetric particles. 14 refs., 10 figs.

  4. The heavy Top Quark Partner in Little Higgs Models

    SciTech Connect (OSTI)

    Larios, F.; Perez, M. A.; Penunuri, F.

    2008-07-02

    Little Higgs models provide a natural explanation for the lightness of the Higgs mass. Through the mechanism of collective symmetry breaking, one loop quadratic divergent contributions to the Higgs mass are avoided. In these models a heavy partner of the Top quark appears as required to cancel out the Top's loop contribution. This heavy Top could be produced at the LHC mainly in the single mode. Because of flavor mixing a large FCNC gtT coupling can be generated at one loop that could boost the single T production mode through gg fusion.

  5. Military students access top R&D

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Military students access top R&D Military students access top R&D Cadets and midshipmen spend summer expanding their scientific knowledge at world-class Los Alamos facilities August 27, 2013 Military students access top R&D Micah Dose, a midshipman at the U.S. Naval Academy and a SARA intern in the Laboratory's ARIES program, peers inside the glovebox where plutonium pits are dis-assembled at Los Alamos. ARIES is the only program in the nation that disassembles and destroys surplus

  6. Top-secret super-secure vault declassified

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Top-secret super-secure vault declassified Top-secret super-secure vault declassified Located in Los Alamos canyon at Technical Area 41, the Tunnel Vault was built between 1948 and 1949. July 23, 2013 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits

  7. Top Better Buildings Beat Articles for February | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Better Buildings Beat Articles for February Top Better Buildings Beat Articles for February March 4, 2016 - 9:54am Addthis Top Better Buildings Beat Articles for February By Monica Kanojia You want a rundown of the Better Buildings Beat blog's commercial sector-relevant, and we've got them. Check out February's list of Beat articles to get caught up on the progress being made by Better Buildings Partners in the market toward breaking various barriers to energy efficiency. Florida Better

  8. WIPP Receives Top Safety Award | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Safety Award WIPP Receives Top Safety Award November 9, 2011 - 12:00pm Addthis Media Contact Deb Gill www.wipp.energy.gov 575-234-7270 CARLSBAD, N.M. - The U.S. Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP) received top accolades from New Mexico's leading mining organizations. The New Mexico Bureau of Mine Safety (BMS) recently recognized URS Washington TRU Solutions (WTS), LLC, the WIPP management and operating contractor, for receiving the New Mexico Mining Association

  9. Measurement of the Single Top Quark Production Cross Section in 1.96-TeV Proton-Antiproton Collisions

    SciTech Connect (OSTI)

    Nakamura, Koji; /Tsukuba U.

    2009-03-01

    Top quarks are predominantly produced in pairs via the strong interaction in {bar p}p collisions at {radical}s = 1.96 TeV . The top quark has a weak isospin 1/2, composing a weak isospin doublet with the bottom quark. This characteristic predicts not only top quark pair production via strong interaction but also single production together with a bottom quark via weak interaction. However, finding single top quark production is challenging since it is rarely produced ({sigma}{sub singletop} = 2.9 pb) against background processes with the same final state like W+jets and t{bar t}. A measurement of electroweak single top production probes the W-t-b vertex, which provides a direct determination of the Cabbibo-Kobayashi-Maskawa (CKM) matrix element |V{sub tb}|. The sample offers a source of almost 100% polarized top quarks. This thesis describes an optimized search for s-channel single top quark production and a measurement of the single top production cross section using 2.7 fb{sup -1} of data accumulated with the CDF detector. We are using events with one high-p{sub T} lepton, large missing E{sub T} and two identified b-quark jets where one jet is identified using a secondary vertex tagger, called SecVtx, and the other jet is identified using SecVtx or a jet probability tagger, called JetProb. In this analysis we have developed a kinematics fitter and a likelihood-based separator between signal and background. As a result, we found that the probability (p-value) that the candidate events originate from a background fluctuation in the absence of single top s-channel production is 0.003, which is equivalent to 2.7 {sigma} deviations in Gaussian statistics, and this excess corresponds to the single top s-channel cross section of 2.38{sub -0.84}{sup +1.01} pb. An observed value of |V{sub tb}| is 1.43{sub -0.26}{sup +0.38}(experimental) {+-} 0.11(theory). We also set the 95% CL. upper limit of {sigma}{sub s} = 4.15 pb for the s-channel production cross section.

  10. America's Next Top Energy Innovator Challenge | Department of...

    Energy.gov (indexed) [DOE]

    The America's Next Top Energy Innovator Challenge, a part of the Startup America initiative, made it easier for start-ups to use inventions and technology developed at the U.S....

  11. Building America Top Innovations 2013 Profile Building America Solution Center

    SciTech Connect (OSTI)

    none,

    2013-09-01

    This Top Innovation profile provides information about the Building America Solution Center created by Pacific Northwest National Laboratory, a web tool connecting users to thousands of pieces of building science information developed by DOEs Building America research partners.

  12. PPPL earns top EPA award | Princeton Plasma Physics Lab

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    PPPL earns top EPA award By Jeanne Jackson DeVoe March 14, 2013 Tweet Widget Google Plus ... The recycling of the metal was a big factor in PPPL winning the 2012 EPA WasteWise ...

  13. Top quark properties from the Tevatron (Conference) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    about 172 GeVcsup 2, the top quark provides a unique environment for tests of the Standard Model and is believed to yield sensitivity to new physics beyond the Standard Model. ...

  14. Los Alamos National Laboratory again top contributor to United...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    County's giving campaign. July 1, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research...

  15. Building America Top Innovations 2012: Unvented, Conditioned Crawlspaces

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research which influenced code requirements by demonstrating that unvented, conditioned crawlspaces use 15% to 18% less energy for heating and cooling while reducing humidity over 20% in humid climates.

  16. Top Quark Anomalous Couplings at the International Linear Collider...

    Office of Scientific and Technical Information (OSTI)

    This process probes the elementary couplings of the top quark to the photon, the Z and the W bosons at a level of precision that is difficult to achieve at hadron colliders. ...

  17. Building America Top Innovations 2012: High-R Walls

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research on high-R-value walls showing the difference between rated and whole wall R values and the need for vented cladding to reduce condensation potential with some insulation types.

  18. The top quark, 20 years after its discovery

    SciTech Connect (OSTI)

    Denisov, Dmitri; Vellidis, Costas

    2015-04-15

    The heaviest of nature’s elementary particles plays an outsized role in many fundamental processes. But because the top quark is so massive, it eluded experimental detection for nearly two decades.

  19. Building America Top Innovations 2012: EEBA Water Management Guide

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes the DOE-sponsored Water Management Guide, which identifies durability issues and solutions for high-performance homes. The Water Management Guide has sold 15,000 copies since its first printing.

  20. Report of the 2005 Snowmass Top/QCD Working Group

    SciTech Connect (OSTI)

    Juste, A.; Kiyo, Y.; Petriello, F.; Teubner, T.; Agashe, K.; Batra, P.; Baur, U.; Berger, C.F.; Cembranos, J.A.R.; Gehrmann-De Ridder, A.; Gehrmann, T.; Glover, E.W.N.; Godfrey, S.; Hoang, A.; Perelstein, M.; Sullivan, Z.; Tait, T.; Zhu, S.; /Johns Hopkins U. /Princeton, Inst. Advanced Study /Syracuse U. /Argonne /SUNY, Buffalo /SLAC /UC, Irvine /Zurich, ETH /Zurich U. /Durham U., IPPP /Ottawa Carleton Inst. Phys. /Munich, Max Planck Inst. /Cornell U., CIHEP /Peking U.

    2006-01-17

    This report discusses several topics in both top quark physics and QCD at an International Linear Collider (ILC). Issues such as measurements at the t tbar threshold, including both theoretical and machine requirements, and the determination of electroweak top quark couplings are reviewed. New results concerning the potential of a 500 GeV e+e collider for measuring Wtb couplings and the top quark Yukawa coupling are presented. The status of higher order QCD corrections to jet production cross sections, heavy quark form factors, and longitudinal gauge boson scattering, needed for percent-level studies at the ILC, are reviewed. A new study of the measurement of the hadronic structure of the photon at a gamma gamma collider is presented. The effects on top quark properties from several models of new physics, including composite models, Little Higgs theories, and CPT violation, are studied.

  1. Building America Top Innovations 2012: Basement Insulation Systems

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes research on basement insulation, which identifies the wall installation methods and materials that perform best in terms of insulation and water resistance.

  2. Building America Top Innovations 2012: Tankless Gas Water Heater Performance

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America field testing that shed light on how real-world water usage affects energy saving estimates of high-efficiency water heating systems.

  3. Building America Top Innovations 2012: Ducts in Conditioned Space

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America field testing that found moving ductwork into the home’s conditioned space can save 8%-15% on energy costs, improve comfort, reduce moisture problems, and even reduce installation costs.

  4. Evidence for electroweak top quark production in proton-antiproton...

    Office of Scientific and Technical Information (OSTI)

    acceptance, background, and observed data we measure the single top quark cross section: sigma(pbar p yields tb + tqb + X) 4.6sub -1.5sup +1.8 pb. The probability for...

  5. NREL Bioenergy Staff Honored for Top Innovations in 2015 | Bioenergy...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Bioenergy Staff Honored for Top Innovations in 2015 May 24, 2016 Photo of a group of ten ... Transfer Excellence Awards to the bioenergy team of (from left to right) Wesley ...

  6. NREL Bioenergy Staff Honored for Top Innovations in 2015 | Awards...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Bioenergy Staff Honored for Top Innovations in 2015 May 24, 2016 Photo of a group of ten ... Transfer Excellence Awards to the bioenergy team of (from left to right) Wesley ...

  7. Feynman Center for Innovation honors top technical trailblazers

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Feynman Center honors top technical trailblazers Feynman Center for Innovation honors top technical trailblazers Breakthroughs tap Los Alamos science for commercial application, from high-performance computing to geothermal energy. July 19, 2016 Fuel Cell Performance and Durability Gary Grider (second from right) with the 2015 Richard P. Feynman Innovation Prize. Also pictured (left to right): Duncan McBranch, Chief Technology Officer of Los Alamos National Laboratory; Terry Wallace, Program

  8. Buried and Encapsulated Ducts - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Buried and Encapsulated Ducts - Building America Top Innovation Buried and Encapsulated Ducts - Building America Top Innovation photo of worker blowing insulation on ducts in an attic. Ductwork installed in unconditioned attics can significantly increase the heating and cooling costs of homes, resulting in thermal losses of 10%-45% of total space conditioning energy use. To address this problem, Building America researchers from the Consortium for Advanced Residential

  9. Energy Department Recognizes Nation's Top Green Power Programs |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Nation's Top Green Power Programs Energy Department Recognizes Nation's Top Green Power Programs November 16, 2011 - 1:08pm Addthis WASHINGTON, D.C. - The U.S. Department of Energy (DOE) today recognized four leading organizations for expanding the market for electricity produced from renewable energy sources during the 11th annual Green Power Leadership Awards in San Francisco, Calif. These organizations' innovative "green power" programs provide consumers

  10. Laboratory named a top-50 employer for Latina women

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Laboratory named a top-50 employer for Latina women Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:November 2, 2016 all issues All Issues » submit Laboratory named a top-50 employer for Latina women Los Alamos is the first national laboratory to be recognized by Latina Style magazine. October 3, 2016 Leah Sanchez started her career at Los Alamos as a student. Leah Sanchez, group leader for the Human Resources Field & Central

  11. Furnace Blower Performance Improvements - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Furnace Blower Performance Improvements - Building America Top Innovation Furnace Blower Performance Improvements - Building America Top Innovation This photo shows a circular-shaped blower fan for furnaces and air conditioners. As homeowners switch on their forced-air furnaces in preparation for cold weather, they may be unaware of how furnace blowers can impact HVAC efficiency. In fact, studies show that the most common blowers have efficiencies of only 10%-15%.

  12. The top quark (20 years after the discovery)

    SciTech Connect (OSTI)

    Boos, Eduard; Brandt, Oleg; Denisov, Dmitri; Denisov, Sergey; Grannis, Paul

    2015-09-10

    On the twentieth anniversary of the observation of the top quark, we trace our understanding of this heaviest of all known particles from the prediction of its existence, through the searches and discovery, to the current knowledge of its production mechanisms and properties. We also discuss the central role of the top quark in the Standard Model and the windows that it opens for seeking new physics beyond the Standard Model.

  13. Los Alamos scientists win top American Physical Society prizes

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Los Alamos scientists win top American Physical Society prizes Los Alamos scientists win top American Physical Society prizes Two senior scientists at Los Alamos National Lab are being honored by the American Physical Society (APS) for their fundamental contributions in nuclear physics and biophysics. October 18, 2016 Alan Perelson (left), of Los Alamos' Theoretical Biology and Biophysics group, and Joe Carlson of the Lab's Nuclear and Particle Physics, Astrophysics and Cosmology group, won two

  14. NREL Facility Named One of Nation's Top Sustainable Buildings |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy NREL Facility Named One of Nation's Top Sustainable Buildings NREL Facility Named One of Nation's Top Sustainable Buildings June 24, 2011 - 12:31pm Addthis The 222,000 sq. ft. RSF has been recognized for its innovative construction and efficiency. | Courtesy of Dennis Schroeder, National Renewable Energy Laboratory staff photographer. The 222,000 sq. ft. RSF has been recognized for its innovative construction and efficiency. | Courtesy of Dennis Schroeder, National

  15. National Residential Efficiency Measures Database - Building America Top

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Innovation | Department of Energy National Residential Efficiency Measures Database - Building America Top Innovation National Residential Efficiency Measures Database - Building America Top Innovation Image of a man insulating the ceiling of a home. Robust cost data for energy-efficiency measures provide an essential framework for transforming the housing industry to high-performance homes. These data allow for effective optimization capabilities to guide builders, researchers, HERS raters,

  16. Next Generation Advanced Framing - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Advanced Framing - Building America Top Innovation Next Generation Advanced Framing - Building America Top Innovation This photo shows advanced framing on a rim header and looking through to a house in the distance. Building America field studies involving thousands of homes have verified significant savings in energy, materials, and labor when production builders apply advanced framing techniques-exceeding $1,000 per home. Building America researchers at Partnership for

  17. Building America's Top Innovations Advance High Performance Homes |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Building America's Top Innovations Advance High Performance Homes Building America's Top Innovations Advance High Performance Homes Innovations sponsored by the U.S. Department of Energy's (DOE) Building America program and its teams of building science experts continue to have a transforming impact, leading our nation's home building industry to high-performance homes. Building America researchers have worked directly with more than 300 U.S. production home builders and

  18. Jefferson Lab Recognizes Top Small Business Subcontractor for 2008 |

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Jefferson Lab Recognizes Top Small Business Subcontractor for 2008 Jefferson Lab Recognizes Top Small Business Subcontractor for 2008 groundbreaking D.G.S. President Ruth Seeley and her husband, Don, vice president and project manager, received the 2008 Jefferson Science Associates/JLab Outstanding Small Business Subcontractor award. Photo: Greg Adams NEWPORT NEWS, Va., April 27, 2009 - D.G.S. Painting Inc., a Yorktown-based business that provides a range of custom-painting services, has

  19. Tapping Top University Draft Picks to Engineer Solar Championships |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Top University Draft Picks to Engineer Solar Championships Tapping Top University Draft Picks to Engineer Solar Championships February 2, 2012 - 3:03pm Addthis The Office of Energy Efficiency and Renewable Energy offers a variety of internships, fellowships, and scholarships in addition to the postdoctoral research awards. Current SunShot fellows pose in front of the Apollo Lunar Module at the National Air and Space Museum. | Energy Department file photo. The Office of

  20. Attic Air Sealing Guide - Building America Top Innovation | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Attic Air Sealing Guide - Building America Top Innovation Attic Air Sealing Guide - Building America Top Innovation Image showing step-by-step instructions for air sealing. One of the most effective energy measures for retrofitting homes across the United States is attic air sealing. The Building America-sponsored Guide to Attic Air Sealing provides much needed instruction essential to achieving effective energy savings while avoiding pitfalls that can lead to combustion safety and

  1. High-Efficiency Window Air Conditioners - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Window Air Conditioners - Building America Top Innovation High-Efficiency Window Air Conditioners - Building America Top Innovation This photo shows a window air conditioning unit in place in a window frame. Window air conditioners are inexpensive, portable, and can be installed by home occupants, making them a good solution for spot cooling and for installing air conditioning into homes that lack ductwork. However, window air conditioners have low minimum efficiency

  2. Groundwater, Legacy Soil Cleanup and Flood Recovery Top Lab's

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Accomplishments | Department of Energy Groundwater, Legacy Soil Cleanup and Flood Recovery Top Lab's Accomplishments Groundwater, Legacy Soil Cleanup and Flood Recovery Top Lab's Accomplishments December 23, 2014 - 12:00pm Addthis Los Alamos National Laboratory’s chromium remediation project is located in a canyon adjacent to pueblo lands. Los Alamos National Laboratory's chromium remediation project is located in a canyon adjacent to pueblo lands. A 1,000-year rain event in September

  3. HVAC Cabinet Air Leakage Test Method - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Cabinet Air Leakage Test Method - Building America Top Innovation HVAC Cabinet Air Leakage Test Method - Building America Top Innovation While HVAC installers have improved their air sealing practices to reduce the amount of air leaking at ducts and duct boots, testing showed that distribution systems still leaked at air handlers and furnace HVAC Air Leakage Fig 1 Air handler furnace cabinet with pressure taps.jpg cabinets. This has hampered the ability of HVAC

  4. Dateline Los Alamos: Top Science News for 2013

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Top Science News for 2013 Dateline Los Alamos: Top Science News for 2013 HIV vaccine, Mars water, climate change, birth of a black hole, thwarting terrorists among topics of interest Los Alamos outstanding science and technology achievements for 2013 December 24, 2013 los alamos acheivements This photo shows a laser pulse at Los Alamos National Laboratory's TRIDENT facility striking a thin foil target to produce neutrons that can be used to interrogate closed containers and determine the amount

  5. Unvented, Conditioned Attics - Building America Top Innovation | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Attics - Building America Top Innovation Unvented, Conditioned Attics - Building America Top Innovation This photo shows an attic that is conditioned (insulated) and showing ductwork. The preference for a large segment of the U.S. housing industry has been to locate HVAC systems in unconditioned attics, but this is highly inefficient. The additional heat loss and gain of ducts in unconditioned, vented attics increases energy use for heating and cooling by 10%. Additionally, duct

  6. Water Management Guide - Building America Top Innovation | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Water Management Guide - Building America Top Innovation Water Management Guide - Building America Top Innovation Cover of the EEBA Water Management Guide. As energy codes and voluntary programs such as ENERGY STAR for Homes and the DOE Zero Energy Ready Home (formerly Challenge Home) continue transforming the housing industry to high performance, better insulated and air-sealed assemblies now have substantially reduced tolerance for drying. As a result, managing bulk water flow has

  7. Search for pair production of the scalar top quark in muon plus tau final states

    SciTech Connect (OSTI)

    Abazov V. M.; Abbott B.; Acharya B. S.; Adams M.; Adams T.; Alexeev G. D.; Alkhazov G.; Alton A.; Alverson G.; Aoki M.; Askew A.; Asman B.; Atkins S.; Atramentov O.; Augsten K.; Avila C.; BackusMayes J.; Badaud F.; Bagby L.; Baldin B.; Bandurin D. V.; Banerjee S.; Barberis E.; Baringer P.; Barreto J.; Bartlett J. F.; Bassler U.; Bazterra V.; Bean A.; Begalli M.; Belanger-Champagne C.; Bellantoni L.; Beri S. B.; Bernardi G.; Bernhard R.; Bertram I.; Besancon M.; Beuselinck R.; Bezzubov V. A.; Bhat P. C.; Bhatia S.; Bhatnagar V.; Blazey G.; Blessing S.; Bloom K.; Boehnlein A.; Boline D.; Boos E. E.; Borissov G.; Bose T.; Brandt A.; Brandt O.; Brock R.; Brooijmans G.; Bross A.; Brown D.; Brown J.; Bu X. B.; Buehler M.; Buescher V.; Bunichev V.; Burdin S.; Burnett T. H.; Buszello C. P.; Calpas B.; Camacho-Perez E.; Carrasco-Lizarraga M. A.; Casey B. C. K.; Castilla-Valdez H.; Chakrabarti S.; Chakraborty D.; Chan K. M.; Chandra A.; Chapon E.; Chen G.; Chevalier-Thery S.; Cho D. K.; Cho S. W.; Choi S.; Choudhary B.; Cihangir S.; Claes D.; Clutter J.; Cooke M.; Cooper W. E.; Corcoran M.; Couderc F.; Cousinou M. -C.; Croc A.; Cutts D.; Das A.; Davies G.; de Jong S. J.; De La Cruz-Burelo E.; Deliot F.; Demina R.; Denisov D.; Denisov S. P.; Desai S.; Deterre C.; DeVaughan K.; Diehl H. T.; Diesburg M.; Ding P. F.; Dominguez A.; Dorland T.; Dubey A.; Dudko L. V.; Duggan D.; Duperrin A.; Dutt S.; Dyshkant A.; Eads M.; Edmunds D.; Ellison J.; Elvira V. D.; Enari Y.; Evans H.; Evdokimov A.; Evdokimov V. N.; Facini G.; Ferbel T.; Fiedler F.; Filthaut F.; Fisher W.; Fisk H. E.; Fortner M.; Fox H.; Fuess S.; Garcia-Bellido A.; Garcia-Guerra G. A.; Gavrilov V.; Gay P.; Geng W.; Gerbaudo D.; Gerber C. E.; Gershtein Y.; Ginther G.; Golovanov G.; Goussiou A.; Grannis P. D.; Greder S.; Greenlee H.; Greenwood Z. D.; Gregores E. M.; Grenier G.; Gris Ph.; Grivaz J. -F.; Grohsjean A.; Gruenendahl S.; Gruenewald M. W.; Guillemin T.; Gutierrez G.; Gutierrez P.; Haas A.; Hagopian S.; Haley J.; Han L.; Harder K.; Harel A.; Hauptman J. M.; Hays J.; Head T.; Hebbeker T.; Hedin D.; Hegab H.; Heinson A. P.; Heintz U.; Hensel C.; Heredia-De La Cruz I.; Herner K.; Hesketh G.; Hildreth M. D.; Hirosky R.; Hoang T.; Hobbs J. D.; Hoeneisen B.; Hohlfeld M.; Hubacek Z.; Hynek V.; Iashvili I.; Ilchenko Y.; Illingworth R.; Ito A. S.; Jabeen S.; Jaffre M.; Jamin D.; Jayasinghe A.; Jesik R.; Johns K.; Johnson M.; Jonckheere A.; Jonsson P.; Joshi J.; Jung A. W.; Juste A.; Kaadze K.; Kajfasz E.; Karmanov D.; Kasper P. A.; Katsanos I.; Kehoe R.; Kermiche S.; Khalatyan N.; Khanov A.; Kharchilava A.; Kharzheev Y. N.; Kohli J. M.; Kozelov A. V.; Kraus J.; Kulikov S.; Kumar A.; Kupco A.; Kurca T.; Kuzmin V. A.; Lammers S.; Landsberg G.; Lebrun P.; Lee H. S.; Lee S. W.; Lee W. M.; Lellouch J.; Li H.; Li L.; Li Q. Z.; Lietti S. M.; Lim J. K.; Lincoln D.; Linnemann J.; Lipaev V. V.; Lipton R.; Liu Y.; Lobodenko A.; Lokajicek M.; Lopes de Sa R.; Lubatti H. J.; Luna-Garcia R.; Lyon A. L.; Maciel A. K. A.; Mackin D.; Madar R.; Magana-Villalba R.; Malik S.; Malyshev V. L.; Maravin Y.; Martinez-Ortega J.; McCarthy R.; McGivern C. L.; Meijer M. M.; Melnitchouk A.; Menezes D.; Mercadante P. G.; Merkin M.; et al.

    2012-04-20

    We present a search for the pair production of scalar top quarks ({tilde t}{sub 1}), the lightest supersymmetric partners of the top quarks, in p{bar p} collisions at a center-of-mass energy of 1.96 TeV, using data corresponding to an integrated luminosity of 7.3 fb{sup -1} collected with the D0 experiment at the Fermilab Tevatron Collider. Each scalar top quark is assumed to decay into a b quark, a charged lepton, and a scalar neutrino ({tilde {nu}}). We investigate final states arising from {tilde t}{sub 1}{ovr {tilde t}{sub 1}} {yields} b{bar b}{mu}{tau}{tilde {nu}}{tilde {nu}} and {tilde t}{sub 1}{ovr {tilde t}{sub 1}} {yields} b{bar b}{tau}{tau}{tilde {nu}}{tilde {nu}}. With no significant excess of events observed above the background expected from the standard model, we set exclusion limits on this production process in the (M{sub {tilde t}{sub 1}}, M{sub {tilde {nu}}}) plane.

  8. A new scoring function for top-down spectral deconvolution

    SciTech Connect (OSTI)

    Kou, Qiang; Wu, Si; Liu, Xiaowen

    2014-12-18

    Background: Top-down mass spectrometry plays an important role in intact protein identification and characterization. Top-down mass spectra are more complex than bottom-up mass spectra because they often contain many isotopomer envelopes from highly charged ions, which may overlap with one another. As a result, spectral deconvolution, which converts a complex top-down mass spectrum into a monoisotopic mass list, is a key step in top-down spectral interpretation. Results: In this paper, we propose a new scoring function, L-score, for evaluating isotopomer envelopes. By combining L-score with MS-Deconv, a new software tool, MS-Deconv+, was developed for top-down spectral deconvolution. Experimental results showed that MS-Deconv+ outperformed existing software tools in top-down spectral deconvolution. Conclusions: L-score shows high discriminative ability in identification of isotopomer envelopes. Using L-score, MS-Deconv+ reports many correct monoisotopic masses missed by other software tools, which are valuable for proteoform identification and characterization.

  9. Spin Measurement in Top Quark Events at the LHC

    SciTech Connect (OSTI)

    Linacre, Jacob

    2015-01-01

    Measurements of polarisation and spin correlations are presented in events with top quarks produced in pp collisions at the LHC. The data correspond to integrated luminosities of $5 fb^{-1}$ at $\\sqrt{s}$ = 7 TeV and 20 $fb^{-1}$ at $\\sqrt{s}$ = 8 TeV collected with the ATLAS and CMS detectors. The top quark polarization is measured in both single top quark production in the t-channel and $t\\bar{t}$ pair-production, from the angular distributions of charged leptons in the rest frame of their parent top quark. The spin correlations are measured in $t\\bar{t}$ events using various angular distributions of the decay products. The measurements are made using both template fitting methods and by unfolding the distributions to the parton-level, where differential measurements with respect to the invariant mass, rapidity, and transverse momentum of the $t\\bar{t}$ system are also made. The spin correlation measurements are used to search for new physics in the form of a light top squark or an anomalous top quark chromo-magnetic dipole moment. All measurements are found to be in agreement with predictions of the standard model.

  10. A new scoring function for top-down spectral deconvolution

    DOE PAGES-Beta [OSTI]

    Kou, Qiang; Wu, Si; Liu, Xiaowen

    2014-12-18

    Background: Top-down mass spectrometry plays an important role in intact protein identification and characterization. Top-down mass spectra are more complex than bottom-up mass spectra because they often contain many isotopomer envelopes from highly charged ions, which may overlap with one another. As a result, spectral deconvolution, which converts a complex top-down mass spectrum into a monoisotopic mass list, is a key step in top-down spectral interpretation. Results: In this paper, we propose a new scoring function, L-score, for evaluating isotopomer envelopes. By combining L-score with MS-Deconv, a new software tool, MS-Deconv+, was developed for top-down spectral deconvolution. Experimental results showedmore » that MS-Deconv+ outperformed existing software tools in top-down spectral deconvolution. Conclusions: L-score shows high discriminative ability in identification of isotopomer envelopes. Using L-score, MS-Deconv+ reports many correct monoisotopic masses missed by other software tools, which are valuable for proteoform identification and characterization.« less

  11. Trial Run of a Junction-Box Attachment Test for Use in Photovoltaic Module Qualification (Presentation)

    SciTech Connect (OSTI)

    Miller, D.; Deibert, S.; Wohlgemuth, J.

    2014-06-01

    Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development and manufacturing process control. There are historical incidences of adverse effects (e.g., fires), caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp-heat', 'thermal-cycle', or 'creep' tests within the IEC qualification protocol is proposed to verify the basic robustness of the adhesion system. The details of the proposed test are described, in addition to a trial run of the test procedure. The described experiments examine 4 moisture-cured silicones, 4 foam tapes, and a hot-melt adhesive used in conjunction with glass, KPE, THV, and TPE substrates. For the purpose of validating the experiment, j-boxes were adhered to a substrate, loaded with a prescribed weight, and then subjected to aging. The replicate mock-modules were aged in an environmental chamber (at 85 deg C/85% relative humidity for 1000 hours; then 100 degrees C/<10% relative humidity for 200 hours) or fielded in Golden, Miami, and Phoenix for 1 year. Attachment strength tests, including pluck and shear test geometries, were also performed on smaller component specimens.

  12. Quasi-Static Analysis for Subsidence of Stacked B-25 Boxes

    SciTech Connect (OSTI)

    Wu, Tsu-te; Jones, William E.; Phifer, Mark A.

    2005-05-24

    This paper presents a quasi-static technique to evaluate the structural deformation of the four stacked B-25 boxes subjected to the static loads of overlaying soil and to determine the effect of corrosion on the deformation. Although the boxes are subjected to a static load, the structural responses of the boxes vary with time. The analytical results indeed show that the deflection, buckling and post buckling of the components of the stacked boxes occur in sequence rather than simultaneously. Therefore, it is more appropriate to treat the problems considered as quasistatic rather than static; namely, the structural response of the stacked boxes are dynamic but with very long duration. Furthermore, the finite-element model has complex contact and slide conditions between the interfaces of the adjoining components, and thus its numerical solution is more tractable by using explicit time integration schemes. The analysis covers the three corrosion scenarios following various time lengths of initial burial under an interim soil cover. The results qualitatively agree with expected differences in deformation for different degrees of corrosion subsidence potential reduction that can be achieved.

  13. New Insights for Improving the Designs of Flexible Duct Junction Boxes (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-01-01

    IBACOS explored the relationships between pressure and physical configurations of flexible duct junction boxes by using computational fluid dynamics (CFD) simulations to predict individual box parameters and total system pressure, thereby ensuring improved HVAC performance. Current Air Conditioning Contractors of America (ACCA) guidance (Group 11, Appendix 3, ACCA Manual D, Rutkowski 2009) allows for unconstrained variation in the number of takeoffs, box sizes, and takeoff locations. The only variables currently used in selecting an equivalent length (EL) are velocity of air in the duct and friction rate, given the first takeoff is located at least twice its diameter away from the inlet. This condition does not account for other factors impacting pressure loss across these types of fittings. For each simulation, the IBACOS team converted pressure loss within a box to an EL to compare variation in ACCA Manual D guidance to the simulated variation. IBACOS chose cases to represent flows reasonably correlating to flows typically encountered in the field and analyzed differences in total pressure due to increases in number and location of takeoffs, box dimensions, and velocity of air, and whether an entrance fitting is included. The team also calculated additional balancing losses for all cases due to discrepancies between intended outlet flows and natural flow splits created by the fitting. In certain asymmetrical cases, the balancing losses were significantly higher than symmetrical cases where the natural splits were close to the targets. Thus, IBACOS has shown additional design constraints that can ensure better system performance.

  14. EERE Success Story-FEMP Assists White House in Setting GHG Reduction

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Target for Federal Government | Department of Energy Assists White House in Setting GHG Reduction Target for Federal Government EERE Success Story-FEMP Assists White House in Setting GHG Reduction Target for Federal Government July 21, 2015 - 12:02pm Addthis The photovoltaic array on top of the U.S. Department of Energy headquarters. (Photo Credit: U.S. Department of Energy) The photovoltaic array on top of the U.S. Department of Energy headquarters. (Photo Credit: U.S. Department of Energy)

  15. Bench-Top Engine System for Fast Screening of Alternative Fuels...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bench-Top Engine System for Fast Screening of Alternative Fuels and Fuel Additives Bench-Top Engine System for Fast Screening of Alternative Fuels and Fuel Additives A bench-top ...

  16. Gear-box fault detection using time-frequency based methods

    SciTech Connect (OSTI)

    Odgaard, Peter F.; Stoustrup, Jakob

    2015-12-31

    Gear-box fault monitoring and detection is important for optimization of power generation and availability of wind turbines. The current industrial approach is to use condition monitoring systems, which runs in parallel with the wind turbine control system, using expensive additional sensors. An alternative would be to use the existing measurements which are normally available for the wind turbine control system. The usage of these sensors instead would cut down the cost of the wind turbine by not using additional sensors. One of these available measurements is the generator speed, in which changes in the gear-box resonance frequency can be detected. Two different time-frequency based approaches are presented in this paper. One is a filter based approach and the other is based on a Karhunen-Loeve basis. Both of them detects the gear-box fault with an acceptable detection delay.

  17. Final Project Report: Self-Correcting Controls for VAV System Faults Filter/Fan/Coil and VAV Box Sections

    SciTech Connect (OSTI)

    Brambley, Michael R.; Fernandez, Nicholas; Wang, Weimin; Cort, Katherine A.; Cho, Heejin; Ngo, Hung; Goddard, James K.

    2011-05-01

    This report addresses original research by the Pacific Northwest National Laboratory for the California Institute for Energy and Environment on self-correcting controls for variable-air-volume (VAV) heating, ventilating and air-conditioning systems and focuses specifically on air handling and VAV box components of the air side of the system. A complete set of faults for these components was compiled and a fault mode analysis performed to understand the detectable symptoms of the faults and the chain of causation. A set of 26 algorithms was developed to facilitate the automatic correction of these faults in typical commercial VAV systems. These algorithms include training tests that are used during commissioning to develop models of normal system operation, passive diagnostics used to detect the symptoms of faults, proactive diagnostics used to diagnose the cause of a fault, and finally fault correction algorithms. Ten of the twenty six algorithms were implemented in a prototype software package that interfaces with a test bed facility at PNNL's Richland, WA, laboratory. Measurement bias faults were instigated in the supply-air temperature sensor and the supply-air flow meter to test the algorithms developed. The algorithms as implemented in the laboratory software correctly detected, diagnosed and corrected these faults. Finally, an economic and impact assessment was performed for the State of California for deployment of self-correcting controls. Assuming 15% HVAC energy savings and a modeled deployment profile, 3.1-5.8 TBu of energy savings are possible by year 15.

  18. Social Media and Messages That Matter: Top Tips and Tools Peer...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Social Media and Messages That Matter: Top Tips and Tools Peer Exchange Call Social Media and Messages That Matter: Top Tips and Tools Peer Exchange Call July 9...

  19. Colorado Start-Up Awarded First 'America's Next Top Energy Innovator...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Colorado Start-Up Awarded First 'America's Next Top Energy Innovator' Agreement Colorado Start-Up Awarded First 'America's Next Top Energy Innovator' Agreement May 20, 2011 - ...

  20. Advanced Combustion Engine R&D: Goals, Strategies, and Top Accomplishm...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Engine R&D: Goals, Strategies, and Top Accomplishments Advanced Combustion Engine R&D: Goals, Strategies, and Top Accomplishments PDF icon advcombustiongoals.pdf More Documents &...

  1. VariableR reclustering in multiple top quark events - Oral Presentatio...

    Office of Scientific and Technical Information (OSTI)

    VariableR reclustering in multiple top quark events - Oral Presentation Citation Details In-Document Search Title: VariableR reclustering in multiple top quark events - Oral...

  2. From Shop Floor to Top Floor: Best Business Practices in Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Shop Floor to Top Floor: Best Business Practices in Energy Efficiency Jump to: navigation, search Tool Summary LAUNCH TOOL Name: From Shop Floor to Top Floor: Best Business...

  3. Carlsbad Field Office P. O. Box 3090 Carlsbad, New Mexico 88221

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    OBO:SWH:RMS:16-2269 4250.00 Department of Energy Carlsbad Field Office P. O. Box 3090 Carlsbad, New Mexico 88221 April 12, 2016 Mr. Phil Breidenbach, President and Project Manager Nuclear Waste Partnership, LLC P.O. Box 2078 Carlsbad, NM 88220-2078 Subject: Contract DE-EM0001971 Nuclear Waste Partnership LLC - Award Fee Determination for the Period October 1, 2014 through September 30, 2015, and FY2015 Fee Determination Scorecard for Total Earned Award Fee and Performance Based Incentives Dear

  4. Top quark physics at the Tevatron results and prospects

    SciTech Connect (OSTI)

    K. Sliwa

    2002-10-16

    The methodology of CDF and D0 top quark analyses and their underlying assumptions are summarized. The CDF and D0 top mass averages, obtained from measurements in several channels and based on about 100 pb{sup -1} of data from p{bar p} collisions at {radical}s = 1.8 TeV collected by each experiment in Run-I, are: M{sub t} = 176.1 {+-} 4.0(stat) {+-} 5.1(syst) GeV/c{sup 2} and M{sub t} = 172.1 {+-} 5.2(stat) {+-} 4.9(syst) Gev/C{sup 2}, respectively. The combined Tevatron measurement of the top quark mass is M{sub t} = 174.3 {+-} 3.2(stat) {+-} 4.0(syst) GeV/c{sup 2}. The CDF measurement of the t{bar t} cross section (assuming M{sub t} = 175 GeV/c{sup 2}) is {sigma}{sub tt} = 6.5 {+-} {sub 1.4}{sup 1.6} pb, and the D0 value (assuming M{sub t} = 172.1 GeV/c{sup 2}) is {sigma}{sub tt} = 5.9 {+-} 1.7 pb. In anticipation of much larger statistics, prospects for top physics in Tevatron Run-II are summarized. The fact that top quark analyses are among the best windows to physics beyond the Standard Model is emphasized.

  5. Search for baryon number violation in top-quark decays

    DOE PAGES-Beta [OSTI]

    Chatrchyan, Serguei

    2014-02-20

    A search for baryon number violation (BNV) in top-quark decays is performed using pp collisions produced by the LHC at sqrt(s) = 8 TeV. The top-quark decay considered in this search results in one light lepton (muon or electron), two jets, but no neutrino in the final state. Data used for the analysis were collected by the CMS detector and correspond to an integrated luminosity of 19.5 inverse femtobarns. The event selection is optimized for top quarks produced in pairs, with one undergoing the BNV decay and the other the standard model hadronic decay to three jets. No significant excessmore » of events over the expected yield from standard model processes is observed. The upper limits at 95% confidence level on the branching fraction of the BNV top-quark decay are calculated to be 0.0016 and 0.0017 for the muon and the electron channels, respectively. Assuming lepton universality, an upper limit of 0.0015 results from the combination of the two channels. These limits are the first that have been obtained on a BNV process involving the top quark.« less

  6. Top quark mass measurement using the template method at CDF

    SciTech Connect (OSTI)

    Aaltonen, T; Alvarez Gonzalez, B; Amerio, S; Amidei, D; Anastassov, A; Annovi, A; Antos, J; Apollinari, G; Appel, J A; Apresyan, A; Arisawa, T

    2011-06-03

    We present a measurement of the top quark mass in the lepton+jets and dilepton channels of tt? decays using the template method. The data sample corresponds to an integrated luminosity of 5.6 fb-1 of pp? collisions at Tevatron with ?s = 1.96 TeV, collected with the CDF II detector. The measurement is performed by constructing templates of three kinematic variables in the lepton+jets and two kinematic variables in the dilepton channel. The variables are two reconstructed top quark masses from different jets-to-quarks combinations and the invariant mass of two jets from the W decay in the lepton+jets channel, and a reconstructed top quark mass and mT2, a variable related to the transverse mass in events with two missing particles, in the dilepton channel. The simultaneous fit of the templates from signal and background events in the lepton+jets and dilepton channels to the data yields a measured top quark mass of Mtop = 172.11.1 (stat)0.9 (syst) GeV/c2.

  7. Search for resonances decaying to top and bottom quarks with the CDF experiment

    SciTech Connect (OSTI)

    Aaltonen, Timo Antero

    2015-08-03

    We report on a search for charged massive resonances decaying to top (t) and bottom (b) quarks in the full data set of proton-antiproton collisions at a center-of-mass energy of √s = 1.96 TeV collected by the CDF II detector at the Tevatron, corresponding to an integrated luminosity of 9.5 fb–1. No significant excess above the standard model background prediction is observed. We set 95% Bayesian credibility mass-dependent upper limits on the heavy charged-particle production cross section times branching ratio to tb. Using a standard model extension with a W' → tb and left-right-symmetric couplings as a benchmark model, we constrain the W' mass and couplings in the 300–900 GeV/c2 range. As a result, the limits presented here are the most stringent for a charged resonance with mass in the range 300–600 GeV/c2 decaying to top and bottom quarks.

  8. MHD Integrated Topping Cycle Project. Thirteenth quarterly technical progress report, August 1, 1990--October 31, 1990

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    The overall objective of the project is to design and construct prototypical hardware for an integrated MHD topping cycle, and conduct long duration proof-of-concept tests of integrated system at the US DOE Component Development and Integration Facility in Butte, Montana. The results of the long duration tests will augment the existing engineering design data base on MHD power train reliability, availability, maintainability, and performance, and will serve as a basis for scaling up the topping cycle design to the next level of development, an early commercial scale power plant retrofit. The components of the MHD power train to be designed, fabricated, and tested include: A slagging coal combustor with a rated capacity of 50 MW thermal input, capable of operation with an Eastern (Illinois {number_sign}6) or Western (Montana Rosebud) coal, a segmented supersonic nozzle, a supersonic MHD channel capable of generating at least 1.5 MW of electrical power, a segmented supersonic diffuser section to interface the channel with existing facility quench and exhaust systems, a complete set of current control circuits for local diagonal current control along the channel, and a set of current consolidation circuits to interface the channel with the existing facility inverter.

  9. Measurement of the W-boson helicity fractions in top-quark decays at CDF

    SciTech Connect (OSTI)

    Chwalek, Thorsten; /Karlsruhe U., EKP

    2007-05-01

    We present a measurement of the fractions F{sub 0} and F{sub +} of longitudinally polarized and right-handed W bosons in top-quark decays using data collected with the CDF II detector. The data set used in the analysis corresponds to an integrated luminosity of approximately 955 pb{sup -1}. We select t{bar t} candidate events with one lepton, at least four jets, and missing transverse energy. Our helicity measurement uses the decay angle {theta}*, which is defined as the angle between the momentum of the charged lepton in the W boson rest-frame and the W momentum in the top-quark rest-frame. The cos{theta}* distribution in the data is determined by full kinematic reconstruction of the t{bar t} candidates. We find F{sub 0}= 0.59 {+-} 0.12(stat){sup +0.07}{sub -0.06}(syst) and F{sub +}=-0.03 {+-} 0.06(stat){sup +0.04}{sub -0.03}(syst), which is consistent with the standard model prediction. We set an upper limit on the fraction of right-handed W bosons of F{sub +} {le} 0.10 at the 95% confidence level.

  10. Measurement of the top quark mass in the dilepton channel

    SciTech Connect (OSTI)

    Abazov, V.M.; Abbott, B.; Abolins, M.; Acharya, B.S.; Adams, M.; Adams, T.; Agelou, M.; Aguilo, E.; Ahn, S.H.; Ahsan, M.; Alexeev, G.D.; /Buenos Aires U. /Rio de Janeiro, CBPF /Rio de Janeiro State U. /Sao Paulo, IFT /Alberta U. /Simon Fraser U. /York U., Canada /McGill U. /Hefei, CUST /Andes U., Bogota /Charles U.

    2006-09-01

    We present a measurement of the top quark mass in the dilepton channel based on approximately 370 pb{sup -1} of data collected by the D0 experiment during Run II of the Fermilab Tevatron collider. We employ two different methods to extract the top quark mass. We show that both methods yield consistent results using ensemble tests of events generated with the D0 Monte Carlo simulation. We combine the results from the two methods to obtain a top quark mass m{sub t} = 178.1 {+-} 8.2 GeV. The statistical uncertainty is 6.7 GeV and the systematic uncertainty is 4.8 GeV.

  11. Neural Networks for Analysis of Top Quark Production

    SciTech Connect (OSTI)

    B. Abbott et al.

    1999-08-04

    Neural networks (NNs) provide a powerful and flexible tool for selecting a signal from a larger background. The D0 collaboration has used them extensively in studying t{anti t} decays. NNs were essential to the measurement of the t{anti t} production cross section in the all-jets channel (t{anti t} {yields} b {anti b}qqqq), and were also used in the measurement of the mass of the top quark in the lepton+jets channel (t{anti t} {yields} b{anti b}l{nu}q{anti q}). This paper will describe two new applications of neural networks to top quark analysis: the search for single top quark production, and an effort to increase the sensitivity in the dilepton channel t{anti t} {yields} b{anti b}e{anti {mu}}{nu}{anti {nu}} beyond that achieved in the published analysis.

  12. Building America Top Innovations 2013 Profile - Zero Energy-Ready

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Single-Family Homes | Department of Energy Building America Top Innovations 2013 Profile - Zero Energy-Ready Single-Family Homes Building America Top Innovations 2013 Profile - Zero Energy-Ready Single-Family Homes Many Building America teams (ARBI, BA-PIRC, BSC, CARB, IBACOS, NorthernSTAR, PHI, etc.) have worked with home builders to design and test zero-energy-ready homes. ba_in_2.1.6_zeroenergyhomes_100213.pdf (807.25 KB) More Documents & Publications Zero Energy-Ready Single-Family

  13. Top quark mass measurement at CDF Run-II

    SciTech Connect (OSTI)

    T. Maruyama

    2004-05-11

    CDF has resumed the top quark mass measurement with upgraded detectors and Tevatron complex. High statistics should allow us to determine the top mass with an uncertainty of a few GeV/c{sup 2} by the end of Run II. The current measured value, using an integrated luminosity of {approx} 108 pb{sup -1}, is 177.5{sub -9.4}{sup +12.7} (stat.) {+-} 7.1(syst.) GeV/c{sup 2} (lepton + jets with one b-jet tagged mode: the current best mode), which is consistent with RunI measurements.

  14. Success at Sandia - Attracting Top Native American STEM Professionals to

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    the Department of Energy | Department of Energy Success at Sandia - Attracting Top Native American STEM Professionals to the Department of Energy Success at Sandia - Attracting Top Native American STEM Professionals to the Department of Energy December 7, 2011 - 12:35pm Addthis Dr. Stan Atcitty, a Sandia engineer, works on power electronics and energy storage integration to the grid. A program run by Sandia Labs for Native Americans in STEM paid for his Master's and Ph.D. degrees while he

  15. Top 100 U.S. Oil and Gas Fields

    U.S. Energy Information Administration (EIA) (indexed site)

    Top 100 U.S. Oil and Gas Fields March 2015 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | Top 100 U.S. Oil and Gas Fields i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other officer or employee of the United States

  16. ESnet Named One of Top Government IT Innovators - Again

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ESnet Named One of Top Government IT Innovators - Again News & Publications ESnet News Media & Press Publications and Presentations Galleries ESnet Awards and Honors Contact Us Media Jon Bashor, jbashor@lbl.gov, +1 510 486 5849 or Media@es.net Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net ESnet Named One of Top Government

  17. Hanford Workers Achieve Success in Difficult Glove Box Project at Plutonium Finishing Plant

    Energy.gov [DOE]

    RICHLAND, Wash. – EM’s Richland Operations Office and contractor CH2M HILL Plateau Remediation Company (CH2M HILL) recently finished safely separating three glove boxes for removal from Hanford’s Plutonium Finishing Plant (PFP) after months of planning and preparation.

  18. DEVELOPMENT OF A NEW GLOVE FOR GLOVE BOXES WITH HIGH-LEVEL PERFORMANCES

    SciTech Connect (OSTI)

    Blancher, J.; Poirier, J.M.

    2003-02-27

    This paper describes the results of a joint technological program of COGEMA and MAPA to develop a new generation of glove for glove boxes. The mechanical strength of this glove is twice as high as the best characteristics of gloves available on the market. This new generation of product has both a higher level of performance and better ergonomics.

  19. Technical task plan for testing filter box sorbent-paint filter test

    SciTech Connect (OSTI)

    Kilpatrick, L.L.

    1993-09-01

    At the Savannah River Plant, High Level Waste Engineering (HLWE) asked Interim Waste Technology (IWT) to choose and test a sorbent to add to the ITP filter box that meets the EPA requirement for land disposal of containerized liquid hazardous wastes per Paint Filter Liquids (PFL) test method 9095. This report outlines the process to be used in accomplishing this task.

  20. Protein arginine methyltransferase 1 regulates herpes simplex virus replication through ICP27 RGG-box methylation

    SciTech Connect (OSTI)

    Yu, Jungeun; Shin, Bongjin; Park, Eui-Soon; Yang, Sujeong; Choi, Seunga; Kang, Misun; Rho, Jaerang

    2010-01-01

    Protein arginine methylation is involved in viral infection and replication through the modulation of diverse cellular processes including RNA metabolism, cytokine signaling, and subcellular localization. It has been suggested previously that the protein arginine methylation of the RGG-box of ICP27 is required for herpes simplex virus type-1 (HSV-1) viral replication and gene expression in vivo. However, a cellular mediator for this process has not yet been identified. In our current study, we show that the protein arginine methyltransferase 1 (PRMT1) is a cellular mediator of the arginine methylation of ICP27 RGG-box. We generated arginine substitution mutants in this domain and examined which arginine residues are required for methylation by PRMT1. R138, R148 and R150 were found to be the major sites of this methylation but additional arginine residues serving as minor methylation sites are still required to sustain the fully methylated form of ICP27 RGG. We also demonstrate that the nuclear foci-like structure formation, SRPK interactions, and RNA-binding activity of ICP27 are modulated by the arginine methylation of the ICP27 RGG-box. Furthermore, HSV-1 replication is inhibited by hypomethylation of this domain resulting from the use of general PRMT inhibitors or arginine mutations. Our data thus suggest that the PRMT1 plays a key role as a cellular regulator of HSV-1 replication through ICP27 RGG-box methylation.

  1. SHM Data Sets and Software

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    SHM Data Sets and Software SHM Data Sets and Software SHMTools is a MATLAB package that facilitates the construction of structural health monitoring (SHM) processes. Contact Institute Director Charles Farrar (505) 665-0860 Email UCSD EI Director Michael Todd (858) 534-5951 Executive Administrator Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505) 665-8899 Email SHMTools Software (0.3.0 Beta) The package provides a set of functions organized into modules according to

  2. Vital area analysis using sets

    SciTech Connect (OSTI)

    Stack, D.W.; Francis, K.A.

    1980-05-01

    This report describes the use of the Set Equation Transformation System (SETS) for vital area analysis. Several concepts are introduced which enable the analyst to construct more efficient SETS user programs to perform vital area analysis. The advantages of performing the transformation of variables without first determining the minimal cut sets of the fault tree are discussed. A ''bottom-up'' approach to solving a fault tree is presented. The techniques described for vital area analysis are also suitable and efficient for many kinds of common cause analysis.

  3. Set the PACE St. Louis

    Energy.gov [DOE]

    Commercial property owners, community associations (e.g., Home Owners Associations), and some residential property owners are eligible for Set the PACE St. Louis. Currently, only residential prop...

  4. Fuel Technologies: Goals, Strategies, and Top Accomplishments; Vehicle Technologies Program (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-04-01

    Fact sheet describes the top accomplishments, goals, and strategies of DOE's Fuel Technologies sub program.

  5. Materials Technologies: Goals, Strategies, and Top Accomplishments (Brochure), Vehicle Technologies Program (VTP)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Document details the goals, strategies, and top accomplishments of DOE's Materials Technologies subprogram.

  6. Building America Top Innovations 2012: ENERGY STAR for Homes Support

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America’s technical support to ENERGY STAR for Homes, which has labeled more than 1.3 million ENERGY STAR homes that have delivered $23 billion in energy cost savings and avoided 210 million tons of green-house emissions.

  7. Building America Top Innovations 2012: National Residential Efficiency Measures Database

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes the DOE-sponsored National Residential Efficiency Measures Database, which contains performance characteristics and cost estimates for nearly 3,000 energy retrofit measures. To date, it is used in four prominent DOE software packages to help optimize energy-efficiency recommendations.

  8. Improved determination of the width of the top quark

    SciTech Connect (OSTI)

    Abazov V. M.; Abbott B.; Acharya B. S.; Adams M.; Adams T.; Alexeev G. D.; Alkhazov G.; Alton A.; Alverson G.; Aoki M.; Askew A.; Asman B.; Atkins S.; Atramentov O.; Augsten K.; Avila C.; BackusMayes J.; Badaud F.; Bagby L.; Baldin B.; Bandurin D. V.; Banerjee S.; Barberis E.; Baringer P.; Barreto J.; Bartlett J. F.; Bassler U.; Bazterra V.; Bean A.; Begalli M.; Belanger-Champagne C.; Bellantoni L.; Beri S. B.; Bernardi G.; Bernhard R.; Bertram I.; Besancon M.; Beuselinck R.; Bezzubov V. A.; Bhat P. C.; Bhatia S.; Bhatnagar V.; Blazey G.; Blessing S.; Bloom K.; Boehnlein A.; Boline D.; Boos E. E.; Borissov G.; Bose T.; Brandt A.; Brandt O.; Brock R.; Brooijmans G.; Bross A.; Brown D.; Brown J.; Bu X. B.; Buehler M.; Buescher V.; Bunichev V.; Burdin S.; Burnett T. H.; Buszello C. P.; Calpas B.; Camacho-Perez E.; Carrasco-Lizarraga M. A.; Casey C. K.; Castilla-Valdez H.; Chakrabarti S.; Chakraborty D.; Chan M.; Chandra A.; Chapon E.; Chen G.; Chevalier-Thery S.; Cho D. K.; Cho S. W.; Choi S.; Choudhary B.; Cihangir S.; Claes D.; Clutter J.; Cooke M.; Cooper W. E.; Corcoran M.; Couderc F.; Cousinou M. -C.; Croc A.; Cutts D.; Das A.; Davies G.; de Jong S. J.; De La Cruz-Burelo E.; Deliot F.; Demina R.; Denisov D.; Denisov S. P.; Desai S.; Deterre C.; DeVaughan K.; Diehl H. T.; Diesburg M.; Ding P. F.; Dominguez A.; Dorland T.; Dubey A.; Dudko L. V.; Duggan D.; Duperrin A.; Dutt S.; Dyshkant A.; Eads M.; Edmunds D.; Ellison J.; Elvira V. D.; Enari Y.; Evans H.; Evdokimov A.; Evdokimov V. N.; Facini G.; Ferbel T.; Fiedler F.; Filthaut F.; Fisher W.; Fisk H. E.; Fortner M.; Fox H.; Fuess S.; Garcia-Bellido A.; Garcia-Guerra G. A.; Gavrilov V.; Gay P.; Geng W.; Gerbaudo D.; Gerber C. E.; Gershtein Y.; Ginther G.; Golovanov G.; Goussiou A.; Graf C. P.; Grannis P. D.; Greder S.; Greenlee H.; Greenwood Z. D.; Gregores E. M.; Grenier G.; Gris Ph.; Grivaz J. -F.; Grohsjean A.; Gruenendahl S.; Gruenewald M. W.; Guillemin T.; Gutierrez G.; Gutierrez P.; Haas A.; Hagopian S.; Haley J.; Han L.; Harder K.; Harel A.; Hauptman J. M.; Hays J.; Head T.; Hebbeker T.; Hedin D.; Hegab H.; Heinson A. P.; Heintz U.; Hensel C.; La Cruz I. Heredia-De; Herner K.; Hesketh G.; Hildreth M. D.; Hirosky R.; Hoang T.; Hobbs J. D.; Hoeneisen B.; Hohlfeld M.; Hubacek Z.; Hynek V.; Iashvili I.; Ilchenko Y.; Illingworth R.; Ito A. S.; Jabeen S.; Jaffre M.; Jamin D.; Jayasinghe A.; Jesik R.; Johns K.; Johnson M.; Jonckheere A.; Jonsson P.; Joshi J.; Jung A. W.; Juste A.; Kaadze K.; Kajfasz E.; Karmanov D.; Kasper P. A.; Katsanos I.; Kehoe R.; Kermiche S.; Khalatyan N.; Khanov A.; Kharchilava A.; Kharzheev Y. N.; Kohli J. M.; Kozelov A. V.; Kraus J.; Kulikov S.; Kumar A.; Kupco A.; Kurca T.; Kuzmin V. A.; Lammers S.; Landsberg G.; Lebrun P.; Lee H. S.; Lee S. W.; Lee W. M.; Lellouch J.; Li H.; Li L.; Li Q. Z.; Lietti S. M.; Lim J. K.; Lincoln D.; Linnemann J.; Lipaev V. V.; Lipton R.; Liu Y.; Lobodenko A.; Lokajicek M.; de Sa R. Lopes; Lubatti H. J.; Luna-Garcia R.; Lyon A. L.; Maciel A. K. A.; Mackin D.; Madar R.; Magana-Villalba R.; Malik S.; Malyshev V. L.; Maravin Y.; Martinez-Ortega J.; McCarthy R.; McGivern C. L.; Meijer M. M.; Melnitchouk A.; Menezes D.; Mercadante P. G.; Merkin M.; et al.

    2012-05-04

    We present an improved determination of the total width of the top quark, {Gamma}{sub t}, using 5.4 fb{sup -1} of integrated luminosity collected by the D0 Collaboration at the Tevatron p{bar p} Collider. The total width {Gamma}{sub t} is extracted from the partial decay width {Gamma}(t {yields} Wb) and the branching fraction {Beta}(t {yields} Wb). {Gamma}(t {yields} Wb) is obtained from the t-channel single top-quark production cross section and {Beta}(t {yields} Wb) is measured in t{bar t} events. For a top mass of 172.5 GeV, the resulting width is {Gamma}{sub t} = 2.00{sub -0.43}{sup +0.47} GeV. This translates to a top-quark lifetime of {tau}{sub t} = (3.29{sub -0.63}{sup +0.90}) x 10{sup -25} s. We also extract an improved direct limit on the Cabibbo-Kobayashi-Maskawa quark-mixing matrix element 0.81 < |V{sub tb}| {le} 1 at 95% C.L. and a limit of |V{sub tb}| < 0.59 for a high-mass fourth-generation bottom quark assuming unitarity of the fourth-generation quark-mixing matrix.

  9. Building America Top Innovations 2012: Vapor Retarder Classification

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes research in vapor retarders. Since 2006 the IRC has permitted Class III vapor retarders like latex paint (see list above) in all climate zones under certain conditions thanks to research by Building America teams.

  10. Top quark mass measurement using the template method at CDF

    DOE PAGES-Beta [OSTI]

    Aaltonen, T

    2011-06-03

    We present a measurement of the top quark mass in the lepton+jets and dilepton channels of tmore » $$\\bar{t}$$ decays using the template method. The data sample corresponds to an integrated luminosity of 5.6 fb-1 of p$$\\bar{p}$$ collisions at Tevatron with √s = 1.96 TeV, collected with the CDF II detector. The measurement is performed by constructing templates of three kinematic variables in the lepton+jets and two kinematic variables in the dilepton channel. The variables are two reconstructed top quark masses from different jets-to-quarks combinations and the invariant mass of two jets from the W decay in the lepton+jets channel, and a reconstructed top quark mass and mT2, a variable related to the transverse mass in events with two missing particles, in the dilepton channel. The simultaneous fit of the templates from signal and background events in the lepton+jets and dilepton channels to the data yields a measured top quark mass of Mtop = 172.1±1.1 (stat)±0.9 (syst) GeV/c2.« less

  11. Top quark and higgs physics at the tevatron

    SciTech Connect (OSTI)

    Yao, WeiMing

    2004-10-01

    This is a writeup of my lectures given at the International Workshop on Frontiers of High Energy Physics, held at CCAST, Beijing, China during July 2-10. I discuss some basic experimental techniques for studying the Top quark and Higgsboson at the Tevatron, and review some recent results from CDF and D0 and their future prospects.

  12. Precision Top-Quark Mass Measurements at CDF

    SciTech Connect (OSTI)

    Aaltonen, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J.A.; Arisawa, T.; Artikov, A.; /Dubna, JINR /Texas A-M

    2012-07-01

    We present a precision measurement of the top-quark mass using the full sample of Tevatron {radical}s = 1.96 TeV proton-antiproton collisions collected by the CDF II detector, corresponding to an integrated luminosity of 8.7 fb{sup -1}. Using a sample of t{bar t} candidate events decaying into the lepton+jets channel, we obtain distributions of the top-quark masses and the invariant mass of two jets from the W boson decays from data. We then compare these distributions to templates derived from signal and background samples to extract the top-quark mass and the energy scale of the calorimeter jets with in situ calibration. The likelihood fit of the templates from signal and background events to the data yields the single most-precise measurement of the top-quark mass, mtop = 172.85 {+-} 0.71 (stat) {+-} 0.85 (syst) GeV/c{sup 2}.

  13. Building America Top Innovations 2012: Outside Air Ventilation Controller

    SciTech Connect (OSTI)

    none,

    2013-01-01

    venThis Building America Top Innovations profile describes Building America research showing how automated night ventilation can reduce cooling energy costs up to 40% and peak demand up to 50% in California’s hot-dry central valley climates and can eliminate the need for air conditioning altogether in the coastal marine climate.

  14. Top-grid monolayer graphene/Si Schottkey solar cell

    SciTech Connect (OSTI)

    Wang, Yusheng; Chen, Caiyun; Fang, Xiao; Li, Zhipeng; Qiao, Hong; Sun, Baoquan; Bao, Qiaoliang

    2015-04-15

    Monolayer graphene/Si Schottkey solar cell was fabricated using a top-grid structure. In comparison with the prevailing “top-window” structure, the newly-designed device structure has simplified the fabrication procedures to avoid ultraviolet (UV) photolithography and SiO{sub 2}-eching. We systematically investigated the effect of chemical doping as well as device area on the device performance. It was found that a power conversion efficiency (PCE) of 5.9% can be achieved by engineering the work function of graphene through chemical doping. Our study indicates that top grid structure is suitable to make low-cost, large area and high efficiency graphene/Si Schottkey solar cell. - Graphical abstract: The engineering of the work function of graphene through chemical doping is an effective approach to improve the performance of monolayer graphene/Si Schottky solar cell. - Highlights: • Monolayer graphene/Si Schottkey solar cell was fabricated. • Chemical doping can effectively tune the work function of graphene film. • Chemical doping has significant effect on the device performance. • The top-grid device structure with graphene is promising with low-cost and high efficiency.

  15. Advanced Framing Systems and Packages- Building America Top Innovation

    Energy.gov [DOE]

    This Building America Innovations profile describes Building America research showing advanced 2x6, 24-inch on-center framing, single top plates, open headers, and 2-stud corners reduced board feet of lumber by more than 1,000 feet, cut energy use by 13%, and cut material and labor costs by more than $1,000 on a typical home.

  16. Building America Top Innovations 2012: Unvented, Conditioned Attics

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research showing an unvented attic insulated along the roof line provides better energy performance than a vented attic when HVAC ducts are located in the attic and there are numerous penetrations through the ceiling deck.

  17. Tracking Study for Top-off Safety Validation at SSRL

    SciTech Connect (OSTI)

    Huang, X.; Bauer, J.; Corbett, J.; Dell'Orco, D.; Hettel, B.; Liu, J.; Rabedeau, T.; Safranek, J.; Schmerge, J.; Sebek, J.; Tanabe, J.; Terebilo, A.; Wang, L.; ,

    2011-08-19

    A tracking study was performed at SSRL to identify necessary controls and to prove the safety of top-off operation from radiation hazard under such conditions. The safety rationale, tracking setup and the results are presented. Top-off operational mode has become a trend for existing and planned third-generation storage ring light sources for the many benefits such as increased average brightness, improved thermal stability and elimination of the interruption to user experiments due to traditional injection [1, 2]. Unlike the traditional decay mode injection which happens a few times a day and during which the photon beamline shutters are closed, top-off mode injection requires photon beamline shutters to remain open during injection and occurs much more frequently, from once every 5 seconds to once every 30 minutes. Therefore injection may be transparent to user experiments and the stored current variation can be significantly reduced. For a facility equipped with a full-energy injector, the biggest challenge to the implementation of the top-off mode may be the control of radiation hazard. Studies at ALS and SSRL [2, 3] have shown that a single injected electron pulse that enters the photon beamline and exits the radiation shield wall would cause unacceptable radiation doses on the experimental floor. For the protection of users and experimental equipment, it is hence a prerequisite for top-off operation to establish controls that absolutely prevent such occurrences. Similar to other facilities such as ALS and APS [2, 4], tracking simulations were conducted at SSRL to identify the control measures, define the specifications and prove the radiation safety. However, a different approach toward the proof of safety is taken at SSRL. In this paper we first describe the SSRL accelerator complex with emphasis on the aspects related to top-off in section 2. The general considerations and requirements for top-off are presented in section 3. Section 4 and 5 give a detailed

  18. A Measurement of the Top Quark Mass with the D0 Detector at s**(1/2) = 1.96-TeV using the Matrix Element Method

    SciTech Connect (OSTI)

    Kroeninger, Kevin Alexander; /Bonn U.

    2004-04-01

    Using a data set of 158 and 169 pb{sup -1} of D0 Run-II data in the electron and muon plus jets channel, respectively, the top quark mass has been measured using the Matrix Element Method. The method and its implementation are described. Its performance is studied in Monte Carlo using ensemble tests and the method is applied to the Moriond 2004 data set.

  19. JLab Recognizes Security Firm as Top Small Business Subcontractor for 2009

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    | Jefferson Lab Recognizes Security Firm as Top Small Business Subcontractor for 2009 JLab Recognizes Security Firm as Top Small Business Subcontractor for 2009 Small Business Mike Dallas, Jefferson Lab's chief operating officer, presents Nicole Stuart, Top Guard president with the Jefferson Science Associates/Jefferson Lab Outstanding Small Business Subcontractor Award for 2009. She is flanked by Chris Stuart, Top Guard vice president and Major Alton Dugger, Top Guard's site supervisor at

  20. Building America Technology Solutions for New and Existing Homes: New Insights for Improving the Designs of Flexible Duct Junction Boxes (Fact Sheet)

    Energy.gov [DOE]

    IBACOS explored the relationships between pressure and physical configurations of flexible duct junction boxes by using computational fluid dynamics simulations to predict individual box parameters and total system pressure, thereby ensuring improved HVAC performance.